Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. Which of the following types of magnetic field exhibits no external flux leakage in the absence
of discontinuities?
Vectored
Longitudinal
Circular
Iron
Aluminum
Copper
Gadolinium
3. What is the value given in SI unites for the permeability of free space?
0.72 Tesla
5 Gausses
4 x 10-7 Henries/M
4. When a ferromagnetic material becomes magnetized under the influence of an increasing
stronger magnetizing force, which of the following occurs?
Ferromagnetic particle
Copper
Air
6. When carrying out magnetic particle inspection, flux density is generated into the ferromagnetic
material being inspected. One unit of flux density is the gauss. How many Webbers per square
meter equal one gauss?
0.72
10-4
2 x 10-6
0.00072
7. The right hand rule shows which of the following relationships?
Electron flow from negative to positive with a magnetic field parallel to the current flow
Current flow from negative to positive with a magnetic field perpendicular to the current flow
Electron flow from positive to negative with a magnetic field parrallel to the current flow
Current flow from positive to negative with a magnetic field peroendicular to the current flow
8. A ferromagnetic material with a steep initial curve will have which of the following properties?
Low permeability
Low coercively
High reluctance
Retentivity
Reluctance
Hysteretic
Permeability
10. Direct induction will always generate which of the following types of magnetic field?
Circular
Longitudinal
Vectored
A change in permeability
A crack
Mono-Polar
Bi-Polar
Multi-Polar
Both parallel to the magnetic field and perpendicular to the the magnetizing force
Both perpendicular to the magnetic field and parallel to the magnetizing current
15. A change in which property of between the material being inspected and the discontinuity to
be detected generates flux leakage?
Conductivity
Permeability
Oxidization
Hysteretic
16. Which of the following materials would be considered to be have a permeability much greater
than that of air?
Aluminum
Bismuth
Zinc
Gadolinium
Low Curvature
No Curvature
highly curved
Permeability
Reluctance
Retentivity
0.9% Carbon
Nickel (99% annealed)
Cobalt (99% annealed)
Alumini
Question of Module-2
1. Which of the following is an advantage of three phase electricity over single phase electricity?
6 - 20 MA
0.25 - 3 KA
6 - 20 KA
0.25 - 3 MA
6. When direct current is passed through a central conductor inserted through a hollow tubes at
what point is the magnetic field intensity essentially zero?
Both at the inner circumference of the tube and at the exact centre of the threading bar
7. Under optimum conditions with dry powder for substances flaw detection, which of the
following waveforms would best be used?
Direct current
Both Iron oxide is less dense than iron and Iron falls out of suspension quicker than iron
oxide
9. The following is a standard definition, 'A small portable device containing artificial
discontinuities used to determine when the correct magnetizing conditions have been achieved.'
Which of the following is correct?
Flux meter
Flux indicator
Gauss meter
A threading bar
286 amps
320 amps
160 amps
143 amps
12. Magnetic particles form indications around flux leakages due to which of the following?
The distance between prod tips when positioned on the chromed hard facing
Both the amount of current used and the permeability of the inspected material
Strippable lacquer
Photography
Magnetic Rubber
Faults lying in a position 45 degrees in either direction from a direction at 45 degrees from
the longitudinal direction
17. Why would a photometer be used when carrying out fluorescent magnetic particle inspection?
Fluorescent inspection
The particles are forced off the parts surface due to vibrational impingement
The particles are forced together around faults showing an indication much larger than the
fault below
The particles are held over the entire surface giving an overall background which may be
confusing
De-wetting agent
Rust inhibitor
Foaming agent
Question of Module-3
1. Why do prod tips need to be kept clean and free from contaminants?
The increase in resistance with dirty prods reduces the current output
Both clean prod tips have less chance of arcing and the increase in resistance with dirty
prods reduces the current output
2. For one person to use prods unaided which of the following would be the most suitable
approach?
Hold both prods in one hand with the detaching medium in the other
Use the residual technique as the detecting medium can be applied after the magnetizing
force
Use a magnetic leech attachment to one prod with the other in one hand and the detecting
medium in the other
Demagnetization
Magnetization
Apply current whilst part is immersed in wet ink followed by removal whilst current still flows
Apply current whilst part is immersed in wet ink. Stop flow of current whilst removing
Cold rolling
Annealing
Work hardening
6. An arrangement consisting of 2 C-shaped yokes connected together at right angles will give
rise to which of the following when testing a weldment?
A circular magnetic field
A vectored field which will detect both transverse and longitudinal faults
7. Which type of surface condition would be most conducive to inspection using multi direction
magnetization by switching from one field to another at 90 degrees to the first?
Rough as cast
brightly machined
Electro polished
There is the possibility of a pre-existing field which will cause an actual magnetic field within
the tested material in an unfavorable direction
There is the possibility of a pre-existing field which will cause an actual magnetic field within
the tested material in an unfavorable direction and the pre-existing field may nullify the applied
field
9. When using a central conductor to magnetize a ferromagnetic tube magnetic field strength is
greatest at what point within the system?
Both under magnetization of large sections and over magnetization of small sections
masking certain areas could be correct
11. When photographing magnetic particle indications, highest definition is obtained when which
of the following films are used?
Water
Oil
Kerosene
Both Aluminum, Cobalt and Nickel, and Copper, Nickel and Iron
Longential
Circular
Circumferential
Longitudinal
17. When using an encircling coil to longitudinally magnetize a length of bar material, which of the
following factors are important when calculating the amount of current to satisfactorily magnetize
the bar?
Length of bar
Diameter of bar
The magnetic field strength on the surface of the smaller bar is weaker than on the surface of
the larger bar
The magnetic field strength on the surface of the larger bar is stronger than on the surface of
the smaller bar
The magnetic field strength at the centre of the small bar is stronger than at the centre of the
large bar
The magnetic field strength at the centre of the small bar is weaker than at the surface of the
large bar
The magnetic field strength on the surface of the smaller bar is stronger than on the surface
of the smaller bar
20. If an AC (RMS) type ammeter reads 700 amps, how much peak current is actually flowing?
700 amps
490 amps
1400 amps
987 amps
Question of Module-4
1. When carrying out magnetic particle inspection on plated parts that have been ground why
should some form of direct current be used?
Bend cracks
Luder lines
Work hardening
False
relevant true
Tran granular
Intergranular
Ductile fracture