Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1 P&ID DRAWING
TAG NO. SEE SHEET 3
2 SEE SHEET 3
3 FUNCTION TRANSMIT
4 BLIND/INDICATE BLIND
5 CASE OUTDOOR WEATHER PROOF
6
7 MOUNTING THREADED
8
9 ENCLOSURE ALUMINUM AL6061
10
GENERAL 11 POWER SUPPLY
12 ST3 XCHEM 24VDC
13
14 BIOGAS 3000 110-230 VAC/50-60HZ
15
16
17
18
19
20 TRANSMITTER OUTPUT x6 ,4-20mA DC
TRANSMITTER 21
22
23 CONTROL MODES N/A
24 N/A
25 ACTION N/A
PROCESS DATA 26 AUTO-MANUAL SWITCH N/A
27 SET POINT ADJUSTMENT N/A
28 MANUAL REGULATOR N/A
29 OUTPUT N/A
30 SERVICE SEE SHEET 3
31
32 MATERIAL ALUMINUM AL6061
33 RATING 0-50PPM
UNIT 34
35 PROCESS CONNECTION EQUIPMENT TAP/IN-LINE
36 ELECTRICAL CONNECTION 1/2" FNPT FITTING
UNIT
37
38
39 ALARM SWITCHES N/A
SWITCH 40
41
42 OPTIONS FLANGE MOUNTING(for ST3)
OPTIONS
43 STAMPED STAINLESS STEEL TAG
44 MFR & MODEL ST3 XChem TOXIC GAS SENSOR
MFR & MODEL
45 GEOTECH BIOGAS 3000
NOTES
SHT 2 OF 3
SPEC NO. REV.
XX.XX.XX A
CONTRACT DATE
XXXX 12/10/2017
REQ./P.O.
BY CHECKED APPR.
SKPB
SERVICE
SEE SHEET 3
PROJ. NO. XXXXX
GRADUATING CLIENT:
UNIT NAME:
JBC GROUP
SEE PAGE 3
DESIGNING CORPORATION LOCATION: BATANGAS PH
1.1 Vendor shall provide protection adequate for shipment and storage of instruments. All openings and exposed p
entering. All flanges and threaded connections shall be protected using wood, steel, or plastic protectors.
.
1.2 Vendor shall clearly state any, and all exceptions in a seperate sections of qoute labelled "Exceptions & Clarificati
1.3 In the event model number given conflicts with other data provided, the model number shall be ignored, and th
making changes.
1.4 Unless noted otherwise all electrical accessories shall be approved for use ina outdoor Class 1 Division 2 Groups
1.5 Vendor data shall be provided in strict accordance with Attachment 1 "Drawing and Data Schedule".
1.6 Vendor shall verify factory calibrationof transmitters to "Calibrate Range"listed. Each Device shall be configured
PAGE: 1 OF 3
SPEC: XX.XX.XX
REV: A
BY: SKPB APP:
DATE: 12/10/2017
ts. All openings and exposed parts shall be protected, so as to prevent debris from
el, or plastic protectors.
umber shall be ignored, and the data provided will govern. Notify Sheldon Bool prior to
d Data Schedule".
BY CHECKED APPR.
SKPB