Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TABLO
CONTENTS
Basic Usage
1 Notice for safety 3
2 Variety of functions supported by TABLO 4
Key functions 4
Various pen Softwares 4
3 Using TABLO 5
4 Pen calibration 5
6 Option setting 7
7 How to use TABLO 9
ETC.
Warranty ---------------------72 Service Center -------------------------72
Page 2
TABLO
TABLO is an innovative pen mouse that easily transforms your computer to a tablet PC.
You can write, draw, sketch, sign and many other features on screen without a keyboard
and a mouse. For more information, please visit http://www.hantech.ca
Basic Usage
Use it clean
Dirt on the USB connector could cause malfunction.
Use soft cloth to remove dirt.
Do not use thinner or any other chemical substances.
Do not touch the sensor on the pen when changing the ink refill
Touching the sensor on the pen could cause malfunction
Page 3
TABLO
Do not write on LCD or other display screens using the tip of ball pen
Using the tip of ball pen on LCD or other display screens,
could cause a scratch or other damages. Please use non-ball pen tip using it
on LCD or other display screens. If there are pen marks on the screen,
please clean it with appropriate cleaning cloth before usage.
TABLO is the most compatible pen device which allows tablet functions on non-tablet
laptop
Page 4
TABLO
4. Using TABLO
1) First, install hardware and driver software following provided installation guide.
2) Place TABLO receiver station on laptop screen and connect USB connector to PC.
Caution!!!
If placing on top of laptop is not suitable because of knob, connect TABLO on
either right or left side of laptop.
If TABLO is placed on either right or left side of laptop, you have to set up station
attachment position accordingly from option menu of drive software (PENonPC)
Caution!!!
If laptop does not recognize hardware
-Connect USB connector to a different port.
-When using USB HUB, connect TABLO in PC USB port directly.
-Quit PENonPC program and restart.
5. Pen calibration
Option menu is to set pen type and pen effect in Microsoft Ink writing.
When pen calibration is not correct, it has to be set up properly for appropriate usage.
Click on monitor shaped PENonPC icon located on lower right corner of system tray.
Menu will be appeared.
Page 5
TABLO
Caution!!!
The screen size may not be imported automatically from your PC. Pop-up window
asking for monitor size will appear on your computer screen. As shown in next
picture, measure width and length in inch or mm using ruler and click OK. If
measurement is not possible, select the closest inch size.
※ TIP
Save your measurement of screen size on backside of laptop for later use.
Caution!!!
You must keep the same pen position during pen calibration as you use pen in
usual circumstances.
Page 6
TABLO
6. Option setting
Option menu is to set pen type and pen effect in Microsoft Ink writing.
Setting instruction
If lever slides to left, the pressure of the pen is soft.
If lever slides to right, the pressure of the pen is strong.
(2) Brush
Control the lever left or right side to adjust brush pen touch.
Setting instruction
Going left is to decrease brush effect.
Right heading is to increase brush effect.
Setting instruction
Rapidly : Pen writing is fast, but writing quality is not so good.
Softly : Pen writing is slow, but writing quality is good.
Page 7
TABLO
Setting instruction
Cross Point : Setting cross point as default
User Point : Setting user point saved in windows
Page 8
TABLO
(7) Update
1) Click (Select)
Click the pen tip once on the surface lightly
2) Double click(Execute)
Click the pen tip twice on the surface lightly.
3) Drag
After clicking what user want to point, move the pen
tip to where user want to bring the final destination
of the pen tip without releasing pen clicking.
Caution!!!
Depending on direction or angle of pen, mouse cursor and pen tip may not be
aligned perfectly. It is not due to product malfunction, you must keep the same hand
position as you did when you operated pen calibration.
Caution!!!
When double-click is inconvenient, set up double click speed slower by changing
“Control panel>Mouse>Double-click speed”
Page 9
TABLO
Please do not install when MS-Office 2003 or 2007 is not already installed.
▷ Microsoft.NET Framework
▷ Tablet PC Platform SDK
▷ Ink Note
▷ Ink Tool
<Microsoft.NET Framework>
- Proceed by clicking on [Next].
- Select [I accept ...] and click on [Next] button.
- Click on [Finish] to complete the installation.
Page 10
TABLO
Please wait for a moment and press [OK] to finish installing Ink Tool.
To use character recognition function, you must download the character recognition
package from Microsoft homepage.
For detailed information, refer to “Installing and using character recognizer” section in this
Guide book.
① Connect TABLO station to USB port on your PC and start MS Word 2003 or Excel 2003
② If you already installed TABLO, Ink Tool toolbar will appear on screen after starting MS-
Office programs. Let`s try annotation function using TABLO.
Click on Ink Tool icon on Toolbar.
ⓐ Clear All
ⓑ Felt Tip Pen
Page 11
TABLO
ⓒ High-Lighter Pen
ⓓ Erase
ⓔ Pen color
ⓕ Pen Thickness
ⓖ Pen Thickness
Page 12
TABLO
ⓗ Character recognizer – Your handwriting can be recognized as text and added into
documents. Click on Character Recognition button and
window will appear as shown below.
ⓘ Options
Page 13
TABLO
ⓙ Insert and quit - After finishing writing, click on `Insert and Quit`.
Your handwritten notes will be added on MS-Office.
④ To use word recognition function, Ink Tool, which is provided in installation CD, must be
installed. Word recognition package could be downloaded from Microsoft homepage for
installation.
download.microsoft.com → “recognizer pack” search → windows XP Tablet PC Edition
2005 Recognizer Pack download
Click on `Insert` button. Your handwriting will be added into documents as text.
① Connect TABLO station to USB port on your PC and start MS PowerPoint 2003
② If you already installed Ink Tool, Ink Tool toolbar will appear on screen after starting
MS-Office programs. Let`s try annotation function using TABLO.
Click on Ink Tool icon on Toolbar
Page 14
TABLO
③ As shown below, slide mode will automatically be active and Toolbar will appear.
ⓐ Clear All
ⓒ High-Lighter Pen
ⓓ Erase
Page 15
TABLO
ⓔ Pen color
ⓕ Pen Thickness
ⓖ Pen Thickness
ⓗ Character recognizer – Your handwriting can be recognized as text and added into
documents. Click on Character Recognition button and
window will appear as shown below.
Page 16
TABLO
ⓘ Options
ⓙ Insert and quit - After finishing writing, click on `Insert and Quit`.
Your handwritten notes will be added on MS-Office.
⑤ To use word recognition function, Ink Tool, which is provided in installation CD, must be
installed. Word recognition package could be downloaded from Microsoft homepage for
Page 17
TABLO
installation.
download.microsoft.com → “recognizer pack” search → windows XP Tablet PC Edition
2005 Recognizer Pack download
Click on `Insert` button. Your handwriting will be added into documents as text.
① Ink Annotation is also available for presentation slide show. Press slideshow key (F5)
in order to activate slideshow mode.
Page 18
TABLO
④ When you close slide mode, a pop-up window will ask whether to save your written
work.
This message asks whether to save inserted ink annotation on presentation slides or not.
If click on “Keep”, written ink annotation will be saved along with original document.
If click on “Discard”, only original document will be saved.
① Connect TABLO Station to USB port on your PC, and start MS-Outlook 2003.
Page 19
TABLO
③ If you already installed Ink Tool, Ink Tool toolbar will appear on screen after starting
MS-Office programs. Let`s try annotation function using TABLO.
Click on Ink Tool icon on Toolbar.
ⓐ Clear All
Page 20
TABLO
ⓒ High-Lighter Pen
ⓓ Erase
ⓔ Pen color
ⓕ Pen Thickness
ⓖ Pen Thickness
Page 21
TABLO
ⓗ Character recognizer – Your handwriting can be recognized as text and added into
documents. Click on Character Recognition button and
window will appear as shown below.
ⓘ Options
Page 22
TABLO
ⓙ Insert and quit - After finishing writing, click on `Insert and Quit`.
Your handwritten notes will be added on MS-Office.
⑤ To use word recognition function, Ink Tool, which is provided in installation CD, must be
installed. Word recognition package could be downloaded from Microsoft homepage for
installation.
download.microsoft.com → “recognizer pack” search → windows XP Tablet PC Edition
2005 Recognizer Pack download
Click on `Insert` button. Your handwriting will be added into documents as text.
Caution!!!
Ink mail is applicable only on HTML mode. Please change the mode.
① Connect TABLO station to USB port on your PC and start MS Word 2007 or Excel 2007
② If the Ink Tool has been installed, Ink Tool will appear in the “Additional Function”
(Add-ins) in MS-Office Program.
③ Additional Function (Add-ins) -> Selecting Ink Tool icons will activate Ink Tool function.
[Add-ins] → [Ink Tool]
Page 23
TABLO
ⓐ Clear All
ⓑ Felt Tip Pen
ⓒ High-Lighter Pen
ⓓ Erase
Page 24
TABLO
ⓔ Pen color
ⓕ Pen Thickness
ⓖ Pen Thickness
ⓗ Character recognizer – Your handwriting can be recognized as text and added into
documents. Click on Character Recognition button and
window will appear as shown below.
Page 25
TABLO
ⓘ Options
ⓙ Insert and quit - After finishing writing, click on `Insert and Quit`.
Your handwritten notes will be added on MS-Office.
⑤ To use word recognition function, Ink Tool, which is provided in installation CD, must be
installed. Word recognition package could be downloaded from Microsoft homepage for
installation.
Page 26
TABLO
Click on `Insert` button. Your handwriting will be added into documents as text.
① Connect TABLO station to USB port on your PC and start MS PowerPoint 2007
② If the Ink Tools has been installed, Ink Tool will appear in the “Additional Function”
(Add-ins) in MS-Office program.
Page 27
TABLO
③ Additional Function (Add-ins) -> Selecting Ink Tool icons will activate Ink Tool function.
④ As shown below, slide mode will automatically be active and Toolbar will appear.
ⓐ Clear All
Page 28
TABLO
ⓒ High-Lighter Pen
ⓓ Erase
ⓔ Pen color
ⓕ Pen Thickness
ⓖ Pen Thickness
Page 29
TABLO
ⓗ Character recognizer – Your handwriting can be recognized as text and added into
documents. Click on Character Recognition button and
window will appear as shown below.
ⓘ Options
ⓙ Insert and quit - After finishing writing, click on `Insert and Quit`.
Your handwritten notes will be added on MS-Office.
Page 30
TABLO
⑥ To use word recognition function, Ink Tool, which is provided in installation CD, must be
installed. Word recognition package could be downloaded from Microsoft homepage for
installation.
download.microsoft.com → “recognizer pack” search → windows XP Tablet PC Edition
2005 Recognizer Pack download
Click on `Insert` button. Your handwriting will be added into documents as text.
① Ink Annotation is also available for presentation slide show. Press slideshow key (F5)
in order to activate slideshow mode.
Page 31
TABLO
④ When you close slide mode, a pop-up window will ask whether to save your written
work.
This message asks whether to save inserted ink annotation on presentation slides or not.
If click on “Keep”, written ink annotation will be saved along with original document. If
click on “Discard”, only original document will be saved.
Page 32
TABLO
③ Ink Tool toolbar will appear on screen after starting MS-Office programs. Let`s try
annotation function using TABLO. Click on Ink Tool icon on Toolbar.
Caution!!!
Ink mail is applicable only on HTML mode. Please change the mode.
ⓐ Clear All
ⓑ Felt Tip Pen
Page 33
TABLO
ⓒ High-Lighter Pen
ⓓ Erase
ⓔ Pen color
ⓕ Pen Thickness
ⓖ Pen Thickness
Page 34
TABLO
ⓗ Character recognizer – Your handwriting can be recognized as text and added into
documents. Click on Character Recognition button and
window will appear as shown below.
ⓘ Options
Page 35
TABLO
ⓙ Insert and quit - After finishing writing, click on `Insert and Quit`.
Your handwritten notes will be added on MS-Office.
⑥ To use word recognition function, Ink Tool, which is provided in installation CD, must be
installed. Word recognition package could be downloaded from Microsoft homepage for
installation.
download.microsoft.com → “recognizer pack” search → windows XP Tablet PC Edition
2005 Recognizer Pack download
Click on `Insert` button. Your handwriting will be added into documents as text.
MSN messenger is a software created by Microsoft where people could chat via internet by
text-typing or hand-writing.
Page 36
TABLO
④ Now let’s try ink chatting. Click on ink chatting icon in order to carry out conversation
using TABLO. Click on “Send” button to send your writing.
Page 37
TABLO
Connect the TABLO station to USB port on your PC, and activate TABLO board on the
Windows Desktop. – Please refer to manual Memo taking. Handwriting could be done on
the screen with any program running.
-capture and save function and print function are available
① Functions
Page 38
TABLO
Copy to Clipboard : For copying and pasting on the wanted place after
selecting the part
→ It is possible to paste on Word or PowerPoint after selecting
the area intended to capture only among displays shown on
the monitor regardless of the used of Ink Tool.
Mode switchover – Conversion tool for window and Duo board
→ Window mode – Electronic pen is used as the function of
general mouse
→ TABLO board mode – It is used so that letters or pictures can
be drawn using the TABLO board with
electronic pen
5. Ink Note
This software allows the users to take a simple note using TABLO.
And saving and editing functions are also available.
It is more convenient when it is used for taking notes on the floor or flat surface area, and
after done writing, it could be inserted into MS-word documents.
1) How to use
Connect TABLO to USB port on your PC and start Ink Note by double clicking "Ink Note"
on desktop.
The window will appear as shown below.
①, ② Add and delete page ③,④,⑤,⑥ Move Page ⑦ Notepad transparency setting
Page 39
TABLO
3) How to insert your handwritten notes on Word file using Ink note
Page 40
TABLO
1. To use word recognition function, Ink Tool, which is provided in installation CD, must be
installed.
2. Word recognition package could be downloaded from Microsoft homepage for installation.
Caution!!!
Download is available when your Windows is authentic.
Not supported in VISTA Home basic.
Caution!!!
-Internet network must be connected.
-You must install Tablet PC platform SDK prior to installing character recognizer.
-You can only install on authentic Windows OS.
-This can only be operated on OS listed below.
- Windows XP Professional Edition - Windows XP Professional Service Pack 2
- Windows Server 2003 - Windows XP Tablet PC Edition 2005
Page 41
TABLO
③ Select Windows XP Tablet PC Edition 2005 Recognizer Pack from search result.
④ Continue clicking on button in order to verify genuine of your Windows OS. When
message appears requiring genuine verification related software, please install the
software.
⑤ After finishing verification, download screen will appear as below. Click on "Download".
Page 42
TABLO
⑦ After the download, safety warning screen will appear as shown below.
Click on "Run" (This step may be skipped on some PC)
⑧ When downloaded file is running, below screen will appear. Click on "Next".
⑨ When License Agreement screen appears, select "I Agree" and click on "Next"
⑫ Click on "Install".
Page 43
TABLO
④ Click on `Insert` button. Your handwriting will be added into documents as text
PDF annotator provides unrestricted annotations on PDF file. It is not supported from
Windows OS. This program should be purchased or download trial version from software
website below.
① Go to http://www.grahl-software.com
② Download trial version from website or purchase original version.
PDF Annotator enables free annotation or writing on PDF files. You can emphasize PDF
document by using High-lighters or attaching additional explanation on document.
TABLO provides easier usage for annotating on PDF document.
③ Menu functions Pen
Page 44
TABLO
Writing, drawing, virtual keyboard and as well as hand writing recognition are available.
① Connect TABLO station to USB port on your PC and start MS Word 2003 or Excel 2003
② When TABLO Station is connected to PC, Ink Annotation function on MS-Office programs
is automatically activated. Let’s try Ink Annotation function using TABLO. Click on the
icon shown below or select Ink Annotation by View >Tools > Ink annotation from menu
bar.
Page 45
TABLO
Eraser
Select object
Page 46
TABLO
④ If you want to disable Ink Annotation, click on Stop Inking or press ESC button.
① Connect TABLO station to USB port on your PC and start MS PowerPoint 2003
Page 47
TABLO
③ Ink Annotation is activated as shown below. Ink Annotation function includes different
ink types, eraser, colors and thickness.
Eraser
Page 48
TABLO
Select object
④ If you want to disable Ink Annotation, click on Stop Inking or press ESC button.
① Ink Annotation is also available for presentation slide show. Press slideshow key (F5)
in order to activate slideshow mode.
Page 49
TABLO
③ When you close slide mode, a pop-up window will ask whether to save your written
work.
This message asks whether to save inserted ink annotation on presentation slides or not.
If click on “Keep”, written ink annotation will be saved along with original document. If
click on “Discard”, only original document will be saved.
① Connect TABLO Station to USB port on your PC and start MS-Outlook 2003.
Page 50
TABLO
Eraser
Page 51
TABLO
Select object
⑤ If you want to disable Ink Annotation, click on Stop Inking or press ESC button
⑥ When using Ink Annotation, HTML mode should be activated by default, and e-mail box
will appear as shown below. Size of e-mail box can be changed. Insert handwritten
message inside the box.
Page 52
TABLO
① Connect TABLO station to USB port on your PC and start MS Word 2007 or Excel 2007
② Click Review on menu bar and select start ink tool located on far right end
③ Ink Tool
① Select Object ② Clear All ③ Ball Point Pen ④ Felt Tip Pen ⑤ High-Lighters Pen
⑥ Eraser(partial) ⑦ Select Color ⑧ Select Ink Thickness ⑨ Close Ink Tool
*If you want to disable Ink Annotation, click on Stop Inking or press ESC button.
① Connect TABLO station to USB port on your PC and start MS PowerPoint 2007.
② Click Review on menu bar and select Start Ink Tool located on far right end
③ Ink Tool
Page 53
TABLO
① Select Object ② Clear All ③ Ball Point Pen ④ Sign Pen ⑤ High-Lighter Pen
⑥ Eraser(partial) ⑦ Select Color ⑧ Select Ink Thickness ⑨ Close Ink Tool
*If you want to disable Ink Annotation, click on Stop Inking or press ESC button.
① Ink Annotation is also available for presentation slide show. Press slideshow key (F5) in
order to activate slideshow mode.
Page 54
TABLO
④ When you close slide mode, a pop-up window will ask whether to save your written
work.
This message asks whether to save inserted ink annotation on presentation slides or not.
If click on “Keep”, written ink annotation will be saved along with original document.
If click on “Discard”, only original document will be saved.
① Connect TABLO Station to USB port on your PC and start MS-Outlook 2007
③ Click Review on menu bar and select Start Ink Tool located on far right end
Page 55
TABLO
[Ink Tool]
ⓐ Select Object ⓑ Clear All ⓒ Ball Point Pen ⓓ Felt Tip Pen ⓔ High-Lighter Pen
ⓕ Eraser(partial) ⓖ Select Color ⓗ Select Ink Thickness ⓘ Close Ink Tool
*If you want to disable Ink Annotation, click on Stop Inking or press ESC button.
MSN messenger is a software created by Microsoft where people could chat via internet by
text-typing or hand-writing.
Page 56
TABLO
② Enter ID & password to log in MSN Messenger. If you don’t have an ID, you have to
register on MSN Messenger first.
④ Now let’s try ink chatting. Click on ink chatting icon in order to carry out conversation
using TABLO. Click on “Send” button to send your writing.
Page 57
TABLO
The software supports multipage and enables to write words, make memo and draw just
like you write on a piece of paper with pencil. For XP and VISTA home basic, Ink Note
(Included in installation CD) provides same function as Windows Journal note.
① Connect TABLO Station to USB port on your PC and start Windows Journal note.
(Start > All Program > Windows Journal note)
Page 58
TABLO
Page 59
TABLO
You can insert text on any document by hand-writing. After writing characters, click on
Insert.
Page 60
TABLO
② Click on gesture.
Default
Setting
③ Default icon for each direction will be shown. If you want to customize gestures, click
on “Customize...” button.
Page 61
TABLO
Page 62
TABLO
⑤ Save your setting and quickly move TABLO on screen to each direction in order to test
gestures.
Practice is recommended for beginners.
‘Snipping Tool’ is a software provided in Windows Vista Home premium or higher OS.
You can use TABLO to capture any screen you want.
Page 63
TABLO
② Screen will be changed to capturing mode. Select desired portion of screen using
TABLO.
1) Setting up
Page 64
TABLO
- Sticky Note is shown above. You can write simple memo using TABLO.
- If you want to write a new memo, click on new memo button.
- When you click on circled area, you can save voice message along with your memo.
Page 65
TABLO
Ink Desktop is a software which utilizes desktop as writing pad. This program is not
loaded in Windows OS. It is available for free download from Microsoft website.
[1] Download
① Go to www.microsoft.com
③ Result page will be shown on the download link. Download and install Ink Desktop.
Tip!!!
TABLO must be connected to PC for activation of Ink Desktop software..
Page 66
TABLO
[2] Setting up
Page 67
TABLO
⑤ Toolbar
ⓐ ⓑ ⓒ ⓓ ⓔ ⓕ
PDF annotator provides unrestricted annotations on PDF file. This program is not loaded
on Window OS. It should be purchased or downloaded trial version from software website.
① Go to http://www.grahl-software.com
② Download trial version from website or purchase original version.
PDF Annotator enables free annotation or writing on PDF files. You can emphasize PDF
document by using High-lighters or attaching additional explanation on document.
TABLO provides easier usage for annotating on PDF document.
③ Menu functions
Page 68
TABLO
When pen device is connected to Windows VISTA home premium or above OS, the cursor
is changed to small point. Following shows how to change small cursor into conventional
mouse cursor.
③ Check the ‘Show pen cursor ...’ item and click on OK button
Page 69
TABLO
Q&A
Can I use this product on third party software?
Yes, you can use this product on all software if they support Mouse devices.
I didn’t use it for a long time and some liquid leaked from battery.
-In case of not using for more than one month, you must disassemble the batteries from
the pen.
-The liquid from old battery may be harmful to the pen.
-Please clean the leakage with dried cloth. If you have problem in your pen, contact your
local distributors or seller
You can always download latest version of PENonPC from our homepage at
http://www.hantech.ca
-The products can be interfered with some metalic sounds or Infrared ray.
(Projector Fan, Air conditioner, Vacuum cleaner, Fluorescent lamp etc.)
-If you find this error on your surroundings, please keep away from the cause of the
trouble.
-Do not use with CRT Monitor.
Please check the battery condition. Or remove and re-install the batteries in the pen.
Unplug the USB connector and quit PENonPC. And restart PENonPC and plug the USB
connector.
-If you don’t use the pen for 30 sec. the power of the pen is automatically off.
-If you want to use the pen again, please lightly touch the pen tip or press any button on
the pen. The power will be automatically turned on.
Page 70
TABLO
Mouse cursor dose not align with pen. What should I do?
If you change the screen resolution or station position, you may need calibration of pen
position.
Refer to ‘How to calibrate pen ’ section of this guide book.
Notice
If you need more information, visit www.hantech.ca
Troubleshooting
-If you can hear some metalic noises nearby, please remove the causes of noise.
-Do you use it near CRT monitor? Please keep away from CRT monitor.
-Please check the discharge of the batteries.
-Please remove obstacles between Station and Pen.
-When using with optical mouse, please use the mouse on mouse pad.
-Do you use it near fluorescent lamp? Some fluorescent lamp can make jittering.
Page 71
TABLO
Etc.
(1) Warranty
A. In-warranty
B. Out-Warranty
Service Center
http://www.hantech.ca
Page 72