Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Because the dilution of a river is usually not sufficient to “purify” sewage and industrial
pollution well enough for downstream users to use it.
Industrial wastewater comes from a specific industry, or factory. It may have specific
chemical streams in the wastewater. Municipal wastewater comes from homes and
businesses via sewers. Municipal wastewater may include industrial wastewater if the
industry is allowed to discharge to the city sewers.
3. Define effluent
Effluent is liquid that flows FROM something. In the laboratory, the term is used to
describe the liquid coming out of a flow experiment. In the context of wastewater
treatment, effluent is defined as the flow coming out of the plant and discharging into the
river. Other examples include treated water being discharged from a factory, OR the
flow coming from a lakeside cabin into a lake. Effluent can be treated or untreated.
Receiving water is a stream, river, lake, ocean, or groundwater, into which treated or
untreated wastewater is discharged.
Downstream uses might be drinking water, irrigation, fish hatchery, shellfish farming,
stock and wildlife watering, swimming, navigation, hydroelectric power generation, etc.
6. Describe the importance of the operator’s role with respect to downstream water users.
In your answer, describe why downstream water users may consider the water treatment
plant (or the operator) an adversary.
The operator and his/her supervisors is the only people that stand between the
downstream users and possible disaster. The operator must be aware of the water quality
needs of the downstream users. He should remain in contact with them so they believe at
a personal level that he has their interests in mind. He may have to contact them and
warn them if (heaven forbid) he has had a system failure and he is discharging above his
NPDES limits; such a warning will be received much more favorably if he is in regular
contact with them. Even though the operator is protecting downstream users from the
total impact of the community the operator serves, the operator is effectively a polluter
from the downstream perspective. The water treatment plant discharges pollution, even
though it is much less than if the plant weren’t there.
7. Define organic waste.
Organic waste is from a plant or animal source. It is waste that contains carbon. Organic
wastes generally can be consumed by bacteria.
Inorganic waste is from a mineral source. It does not contain carbon. Examples of
inorganic wastes are silt, clay, and chemicals and metals from industrial operations.
Bacteria may be able to change the chemical form of these wastes, but it usually takes
more time than the residence time of a water treatment plant.
9. In some communities, the municipal plant may receive water from an industrial
operation, and treat this water along with the domestic wastes. What industries produce
organic wastes?
Industries that produce organic wastes include vegetable and fruit processing plants, dairy
processing plants, pulp and paper plants, meat processing plants, etc. (When you drive
up the Lewiston Grade to Moscow, you may see big splotches green grass that are
obviously irrigated land on the north side of the river. This is the result of land
application of pea and lentil processing waters. By employing land application, the
producers are putting the nutrients into the irrigated plants, instead of into the river.)
Sand and gravel operations, mining operations, and industries that discharge inorganic
chemicals.
Primary treatment removes the sinkers and the floaters – the two visible wastes that can
be removed physically. Secondary treatment includes methods to convert dissolved and
suspended wastes into a form that is easily separated from the water, such as a settleable
solid. Settleable solids can be removed by sedimentation and filtration.
Aerobic bacteria are those that will survive only in an environment with available oxygen
(that is, water in air or in dissolved air). Aerobic bacteria cannot use oxygen that is
bound in a chemical compound.
An Imhoff Cone is a clear, cone-shaped container with graduated lines on it. It is used to
measure the amount of settleable solids in a given volume of water.
BOD is the amount of oxygen used by organisms in a water body (or a water sample) as
the organisms break down decomposable organic matter under aerobic conditions. BOD
has units of mg/L, representing the mg of oxygen used per L of water. (Careful: your
book says it is a rate – but it isn’t. The units aren’t per time.)
16. What causes oxygen depletion when organic wastes are discharged to water? In your
answer, list the bad outcomes if oxygen depletion occurs.
When oxidizable wastes are discharged to a stream, bacteria decompose these wastes.
Because the environment is aerobic, the bacteria are aerobic, and use oxygen for their
respiration as they bread down the organics. If the food supply is ample, the bacteria will
reproduce until they exhaust the oxygen supply. When this occurs, fish and other living
things in the stream die, and anaerobic bacteria begin to multiply. The anaerobes release
gases such as methane, hydrogen sulfide, which stink. The decomposing fish and other
creatures killed by the depletion also stink. This condition is called septic.
The transformation of a nutrient such as nitrogen or carbon from one form to another by
biological and biochemical means until the nutrient is returned to its original form.
(a) methane, a flammable gas (b) hydrogen sulfide gas, which smells like rotten eggs
National Pollution Discharge Elimination System – a system that regulates discharge into
navigable waters from all point sources of pollution. All point sources must have an
NPDES permit. (A point source is distinguished from a non-point source by the extent
of the discharge. A point source comes out of a pipe or ditch; a non-point source
discharges all along the river bank.)
23. What types of things might have discharge limits on a NPDES permit that is granted
for a municipal wastewater treatment plant?
You should name 3 from the following list: Typhoid, cholera, dysentery, polio, giardia
and hepatitis.
25. When water is flowing through the city sewers to the sewage treatment plant, what
problem can occur if it takes a long time?
If the flow time is long and the weather is hot, all the oxygen will be depleted, and the
water will go septic. Hydrogen sulfide can cause an odor problem all the way en route,
can damage concrete in the plant, and makes the wastes more difficult to treat.
Combined sewers carry storm water and sewage in the same system. They can be a
problem during heavy rains – the treatment plant may be overloaded and unable to treat
all the water, and then have to release some untreated water into the receiving stream.
27. Why is the screening step included in waste water treatment?
The screening step is employed to keep wood, rags, roots, and sand from damaging the
pumps and other equipment.
Detention time in a clarifier, or sedimentation tank, provides sufficient time for the
sinkers to get to the bottom, and the floaters to get to the top.
Scum is removed with a scum skimmer, and sludge is removed with a scraper blade, or
plow, and pushed into a sump at the bottom of the clarifier.
31. How are the large populations of microorganisms in the effluents from the trickling
filters, rotating biological contactors, and activated sludge tanks removed from the flow?
32. What two steps are performed on sewage sludge before it is disposed?
33. When are waste treatment ponds used instead of sedimentation tanks, trickling filters,
etc.?
When you have a lot of land in a sparsely populated area, which allows you to perform
anaerobic treatment without upsetting residents with the odor.
34. How long a detention time is required within waste treatment ponds in order to
remove solids and harmful bacteria?
Usually a month or more is required within waste treatment ponds in order to remove
solids and harmful bacteria