Sei sulla pagina 1di 1

WELDING PROCEDURE SPECIFICATION (WPS)

Welding Procedure Specification EN 15609-1 111 WPS No: ATOM ISI-WPS-003 rev 00
Method of Preparation and Cleaning:
WPQR No: ATOM ISI-WPQR-003
Grinding and Brushing
Manufacturer: ATOM ISI LTD. ŞTİ. Parent Material Designation: EN 10025-1 S355J2C+N(1.2)
cover group 1a-1
Mode of Metal Transfer: Spray Arc Material Thickness(mm): 20 mm (10mm≤t≤40mm)
Joint Type and Weld Type: BW Outside Diameter(mm): -
Weld Preparation Details(Sketch) Welding Position: PF (a covers all , except PG and J-L045 )

Joint Design Welding Sequences

Welding Details / Kaynak İşlemi Detayları


Wire Feed
Process filler size Current Polarity Type Travel Speed Kaynak Hızı Heat Input Isı
Run Paso Current A Voltage V Speed /Tel Hızı
mm/min.
Yöntem elektrot,tel çapı Akım Türü Kutup m/min. Girdisi KJ/mm
R1 111 2,5 85-90 21-23 DC(+) - 77,26 1,284
F1 111 3,25 100-110 21-23 DC(+) - 68,9 1,758
F2 111 3,25 100-110 22-23 DC(+) - 72,46 1,674
F3 111 3,25 100-110 22-23 DC(+) - 84,33 6
F4 111 3,25 90-100 22-23 DC(+) - 70,28 7,2
C1 111 3,25 110-120 22-23 DC(+) - 91,38 6,6
C2 111 3,25 110-120 22-23 DC(+) - 105,1 1,44
C3 111 3,25 110-120 22-23 DC(+) - 107,69 1,23
B1 111 3,25 110-120 22-23 DC(+) - 202,31 0,654
B2 111 3,25 110-120 22-23 DC(+) - 175 0,756

Filler Metal Designation and Make TS EN ISO 2560-A – GEKA LASER B47 - 42 4 B 42
Any Special Backing or Drying: N/A Post-heating: No
Designation Gas / Flux : -Shielding: No Pre-heat maintenance temperature: No
-Backing: No Post-Weld Heat Treatmentand /or Ageing: No
Gas Flow Rate(l/min) -Shielding: No Other Information,e.g:
-Backing: No Weaving(max width of run):Weaving N/A
Tungsten Electrode Type/Size: N/A Oscillation:amplitude,frequency,dwell time: No
Details of Back Gouging/Backing: Grinding ,Brushing Pulse Welding details: N/A
Preheat Temperature: If necessary Min 100°C Distance contact tube/work piece: N/A
Interpass Temperature: Max 250°C Plasma Welding details: N/A
Time,Temperature,Method Heating and Cooling Rates: No Torch angle: N/A
*a= (a covers the equal or lower specified yield strenght of the same group steel)

Tarih Tarih Tarih


Date 15.12.2015 Date Date
Düzenleyen Kontrol Eden Onaylayan
Prepared by ALİ ÖZTÜRK Controlled by Approved by
İmza İmza İmza
Signature Signature Signature

Potrebbero piacerti anche