Sei sulla pagina 1di 5

A:SR1# admin display-config

# TiMOS-B-13.0.R1 both/i386 ALCATEL SR 7750 Copyright (c) 2000-2015 Alcatel-Lucent.


# All rights reserved. All use subject to applicable license agreements.
# Built on Fri Feb 27 21:10:57 PST 2015 by builder in /rel13.0/b1/R1/panos/main

# Generated SUN JUL 31 22:38:52 2016 UTC

exit all
configure
#--------------------------------------------------
echo "System Configuration"
#--------------------------------------------------
system
name "SR1"
chassis-mode d
dns
exit
snmp
shutdown
exit
time
sntp
shutdown
exit
zone UTC
exit
thresholds
rmon
exit
exit
exit
#--------------------------------------------------
echo "System Security Configuration"
#--------------------------------------------------
system
security
no per-peer-queuing
cpu-protection
link-specific-rate max
policy 254 create
exit
policy 255 create
exit
port-overall-rate 15000
exit
exit
exit
#--------------------------------------------------
echo "Log Configuration"
#--------------------------------------------------
log
filter 1
default-action drop
entry 10
action forward
match
application eq "ospf"
exit
exit
exit
log-id 1
filter 1
time-format local
from main
to console
no shutdown
exit
exit
#--------------------------------------------------
echo "System Security Cpm Hw Filters and PKI Configuration"
#--------------------------------------------------
system
security
exit
exit
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
qos
exit
#--------------------------------------------------
echo "Card Configuration"
#--------------------------------------------------
card 1
card-type iom3-xp-b
mda 1
mda-type m5-1gb-sfp-b
no shutdown
exit
no shutdown
exit
#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
port 1/1/1
ethernet
exit
no shutdown
exit
port 1/1/2
ethernet
exit
no shutdown
exit
port 1/1/3
ethernet
exit
no shutdown
exit
port 1/1/4
ethernet
exit
no shutdown
exit
port 1/1/5
shutdown
ethernet
exit
exit
#--------------------------------------------------
echo "System Sync-If-Timing Configuration"
#--------------------------------------------------
system
sync-if-timing
begin
commit
exit
exit
#--------------------------------------------------
echo "Management Router Configuration"
#--------------------------------------------------
router management
exit

#--------------------------------------------------
echo "Router (Network Side) Configuration"
#--------------------------------------------------
router
interface "extLo11"
address 172.16.11.1/32
loopback
no shutdown
exit
interface "extLo12"
address 172.16.12.1/32
loopback
no shutdown
exit
interface "system"
address 10.0.255.1/32
no shutdown
exit
interface "toCL_Lo1"
address 10.11.255.1/32
loopback
no shutdown
exit
interface "toCL_p3"
address 10.11.0.1/24
port 1/1/3
no shutdown
exit
interface "toXR1_p1"
address 10.0.3.1/24
port 1/1/1
no shutdown
exit
interface "toXR1_p2"
address 10.0.4.1/24
port 1/1/2
no shutdown
exit
ecmp 2
#--------------------------------------------------
echo "OSPFv2 (Inst: 1) Configuration"
#--------------------------------------------------
ospf 1 10.0.255.1
asbr
timers
spf-wait 1000 10 100
lsa-generate 1000 10 100
lsa-arrival 90
incremental-spf-wait 10
exit
export "RP_LO_TO_OSPF_1"
area 0.0.0.0
area-range 10.0.0.0/8 advertise
interface "system"
metric 3
no shutdown
exit
interface "toXR1_p1"
interface-type broadcast
hello-interval 2
dead-interval 8
authentication-type message-digest
message-digest-key 1 md5
"ZklXLgy1AXnGGiOJK3Zji5o698u05a5czooWmi9G/8jHlI7QOajTy." hash2
no shutdown
exit
interface "toXR1_p2"
interface-type point-to-point
hello-interval 2
dead-interval 8
authentication-type message-digest
message-digest-key 1 md5
"ZklXLgy1AXnGGiOJK3Zji3aZdMun/Q5JJo4tJRXJSwgF37Z54XE/Tk" hash2
no shutdown
exit
exit
area 0.0.0.1
area-range 10.11.0.0/16 advertise
interface "toCL_Lo1"
no shutdown
exit
interface "toCL_p3"
passive
no shutdown
exit
exit
no shutdown
exit
exit

#--------------------------------------------------
echo "Service Configuration"
#--------------------------------------------------
service
customer 1 create
description "Default customer"
exit
exit
#--------------------------------------------------
echo "Router (Service Side) Configuration"
#--------------------------------------------------
router
#--------------------------------------------------
echo "OSPFv2 (Inst: 1) Configuration"
#--------------------------------------------------
ospf 1 10.0.255.1
no shutdown
exit
#--------------------------------------------------
echo "Policy Configuration"
#--------------------------------------------------
policy-options
begin
prefix-list "extLo11"
prefix 172.16.11.0/24 through 32
exit
prefix-list "extLo12"
prefix 172.16.12.0/24 through 32
exit
policy-statement "RP_LO_TO_OSPF_1"
entry 10
from
prefix-list "extLo11"
exit
action accept
metric set 11
type 1
exit
exit
entry 20
from
prefix-list "extLo12"
exit
action accept
metric set 12
type 2
exit
exit
default-action reject
exit
commit
exit
exit

exit all

Potrebbero piacerti anche