Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
products
SATELLITE COMMUNICATIONS
T R A N S C E I V E R I N T E R N A T I O N A L
P R O D U C T C A T A L O G U E
A P R I L
2 0 1 0
SATELLITE COMMUNICATION PRODUCTS
INTERNATIONAL PRICE LIST
Contents: Page:
No part of this document may be reproduced, transcribed or translated into any language or
transmitted in any form whatsoever without the prior written consent of Codan Limited.
The ordering code format is shown on page below and comprises the base code plus groups of option
letters to show the particular transceiver configuration and options fitted.
The base code number is an initial group of digits which specify the basic transceiver version and the
SSPA RF output power rating. The second character specifies the SSPA RF output connector option, the
third group specifies the Converter options, and the fourth group specifies the power supply option.
Finally, a fifth character group is appended to indicate CE certification.
Not all possible combinations of transceiver options are available. To assist with ordering, the transceiver
versions that are available are shown in the tables on pages 5 and 6.
Note that the ordering codes shown in these tables are not marked on the individual transceiver modules
because they represent the code for a complete transceiver rather than the transceiver modules.
Operating voltage:
- 48 for 48 VDC powered
- AC for AC mains powered
Converter synthesisers:
- S for Single synthesiser
- D for Dual synthesiser
Converter bandwidth:
- N for Narrow bandwidth (40 MHz)
- W for Wide bandwidth (80 MHz)
Frequency band:
- 2 for Band 2 (Standard): Tx: 5,850—6,425 GHz
Rx: 3,625—4,200 GHz
RF output connector:
- N for N-type coaxial connector
- W for waveguide
RF output power:
- two digits for RF O/P pwr (e.g. 20 for 20 W), or
- two digits and a letter for RF OP pwr (e.g. 12H for 120 W)
Note: Where any of the model extension variants “A-X/Y/Z-BB-GG” have been made BOLD indicates
that variant has an option.
1 Effective Date – April 2010
C-BAND TRANSCEIVERS
AC MAINS POWERED
RF output power Ordering Code
10 W 5710-N-2/N/S-AC-CE $16450
20 W 5720-N-2/N/D-AC-CE
40 W 5740-N-2/N/D-AC-CE
Transceiver AC Power Supply pole mtg kit suits 300 mm (12") pole * (15-40147) Add
* Non-core products
20 W 5720-N-2/N/D-48-CE
40 W 5740-N-2/N/D-48-CE
* Non-core products
60 W 5760-W-2/N/D-AC (-CE)
120 W 5712H-W-2/N/D-AC (-CE)
* Non-core products
Transmit
Band
Synthesiser (Dual)
Output Power (W)
Output (N-type or
CE Certification
Wide: 80 MHz)
waveguide)
Ordering Code
5720-N-2/N/D-AC-CE 20 N * N S Y
5720-N-2/W/D-AC-CE 20 N * W D Y
5720-W-2/N/D-AC-CE 20 W * N D Y
5720-W-2/W/D-AC-CE 20 W * W D Y
5740-N-2/N/D-AC-CE 40 N * N D Y
5740-N-2/W/D-AC-CE 40 N * W D Y
5740-W-2/N/D-AC-CE 40 W * N D Y
5740-W-2/W/D-AC-CE 40 W * W D Y
5760-W-2/N/D-AC 60 W * N D N
5760-W-2/W/D-AC 60 W * W D N
5760-W-2/N/D-AC-CE 60 W * N D Y
5760-W-2/W/D-AC-CE 60 W * W D Y
5712H-W-2/N/D-AC 120 W * N D N
5712H-W-2/W/D-AC 120 W * W D N
5712H-W-2/N/D-AC-CE 120 W * N D Y
5712H-W-2/W/D-AC-CE 120 W * W D Y
Transmit
Band
Synthesiser (Dual)
Output Power (W)
Output (N-type or
CE Certification
Wide: 80 MHz)
waveguide)
Ordering Code
5720-N-2/N/D-48-CE 20 N * N D Y
5720-N-2/W/D-48-CE 20 N * W D Y
5720-W-2/N/D-48-CE 20 W * N D Y
5720-W-2/W/D-48-CE 20 W * W D Y
5740-N-2/N/D-48-CE 40 N * N D Y
5740-N-2/W/D-48-CE 40 N * W D Y
5740-W-2/N/D-48-CE 40 W * N D Y
5740-W-2/W/D-48-CE 40 W * W D Y
Part Number
or Ordering
Description Comment Code
Cable, Serial Conv-PC, (DB-9S) 2 m Incl in transceiver system 08-05301-002
Cable, Coax 50 Ohm N-N Plug 1 m Incl in N-type transceiver system 08-05366-010
Cable, Coax 50 Ohm N-N Plug 2 m 08-05366-020
Cable, Coax 50 Ohm N-N Plug 3 m Incl in transceiver system 08-05366-030
Cable, Coax 50 Ohm N-N Plug 5 m 08-05366-050
Cable, Coax 50 Ohm N-N Plug 8 m 08-05366-080
Cable, DC Power (Rd/Bk) 5 m Incl in LP transceiver system 08-05634-005
Cable, HP SSPA to Converter 2,0 m Incl in HP transceiver system 08-05857-020
Cable, HP SSPA to Converter 3,0 m * 08-05857-030
Cable, HP SSPA to Converter 4,0 m * 08-05857-040
Cable, AC 3 core 24/0, 20 8 m Incl in LP AC transceiver system 08-05862-010
Cable, Converter to SSPA Connector 2 m Incl in transceiver system 08-05887-020
Cable, Converter to SSPA Connector 3 m * 08-05887-030
Cable, Converter to SSPA Connector 4 m * 08-05887-040
Cable, DC Pwr SSPA - Converter 2 m Incl in transceiver system 08-05961-002
Cable, DC Pwr SSPA - Converter 3 m * 08-05961-003
Cable, DC Pwr SSPA - Converter 4 m * 08-05961-004
Cable, AC Mains 5 m Incl in HP transceiver system 08-06201-005
Flange Kit, WR229 Half Gasket c/w nuts Incl in transceiver system 15-40093
Power Supply Pole Mount Kit 8"/200 mm pole Incl in LP AC transceiver system 15-40128
Power Supply Pole Mount Kit 12"/300 mm pole * 15-40147
Flex Waveguide WR137, 36" 15-40189
Kit, Conv Mounting, HP SSPAs Incl in HP transceiver system 15-40196-000
Kit, Connector Sealing Incl in transceiver system 15-40202
RF Monitor Port option, 10 W and 20 W SSPAs 15-41000-000
Kit, Boom Mounting Incl in LP transceiver system 15-42000-000
Kit, Wg-WG Mtg CPR137G CE SSPA Hub Mtg Incl in HP transceiver system 15-42030-000
Kit, SSPA Hub Mounting Incl in HP transceiver system 15-42031-000
Manual, C-Band Transceiver reference Incl in transceiver system 15-44001-EN
Hand-held Controller 5560 5560
Remote Controller package 5570, 100m cable * 5570-100
Remote Controller package 5570, 50m cable 5570-50
Hex Driver, 2.5 x 75 with handle Incl in transceiver system 75-31400-002
TRF, 3.625—4,200 GHz c/w flange kit TRF-C2
* Non-core products
The following list of product packages should only be used to order modules for replacement or
upgrade purposes.
To order complete transceivers, please use the transceiver ordering codes shown on pages 5
and 6.
* Non-core products
The Ku-Band transceiver ordering code system is designed to provide unambiguous identification of
transceiver variants and options.
The ordering code format is shown below and comprises the base order code plus groups of option
letters to show the particular transceiver configuration and options fitted.
The Ku-Band ordering code comprises an initial group of digits which specify the basic transceiver model
and the SSPA RF output power rating, a second group which specifies the Converter options, a third
group which specifies the receive band (i.e. LNB option) and a fourth group which specifies the power
supply option. Finally, a fifth character group is appended to indicate CE certification.
Not all possible combinations of transceiver options are available. To assist with ordering, the transceiver
versions that are available are shown in the tables on pages 13 and 14.
CE certification:
- CE for CE certified version
- Blank for non-certified version
Operating voltage:
- 48 for 48 VDC powered
- AC for AC mains powered
Converter bandwidth:
- N for Narrow bandwidth (40 MHz)
- W for Wide bandwidth (80 MHz)
RF output power:
- two digits representing RF output power
rating (e.g. 16 for 16 W)
Note: Where any of the model extension variants “X/Y-AA-BB-GG” have been made BOLD indicates that
variant has an option.
8W 5908-1/N-R1-AC-CE
16 W 5916-1/N-R1-AC-CE
Converter
options Wide IF bandwidth (80 MHz) option
options and AC Power Supply pole mtg kit to suit 300 mm (12") pole * (15-40147)
Add
* Non-core products
8W 5908-1/N-R1-48-CE
16 W 5916-1/N-R1-48-CE
Converter
options Wide IF bandwidth (80 MHz) option
* Non-core products
40 W 5940-1/N-R1-AC-CE
Converter
options Wide IF bandwidth (80 MHz) option
* Non-core products
Transmit
IF Bandwidth(Narrow: 40 MHz,
Band Receive Band
Band 2: 13,75—14,50
Output Power (W)
CE Certification
Wide: 80 MHz)
GHz
GHz
GHz
GHz
GHz
Model Number Price
5908-1/N-R1-AC-CE 8 * * N Y
5908-1/W-R1-AC-CE 8 * * W Y
5908-1/N-R2-AC-CE 8 * * N Y
5908-1/W-R2-AC-CE 8 * * W Y
5908-1/N-R3-AC-CE 8 * * N Y
5908-1/W-R3-AC-CE 8 * * W Y
5908-2/N-R1-AC 8 * * N N
5908-2/W-R1-AC 8 * * W N
5908-2/N-R2-AC 8 * * N N
5908-2/W-R2-AC 8 * * W N
5908-2/N-R3-AC 8 * * N N
5908-2/W-R3-AC 8 * * W N
5916-1/N-R1-AC-CE 16 * * N Y
5916-1/W-R1-AC-CE 16 * * W Y
5916-1/N-R2-AC-CE 16 * * N Y
5916-1/W-R2-AC-CE 16 * * W Y
5916-1/N-R3-AC-CE 16 * * N Y
5916-1/W-R3-AC-CE 16 * * W Y
5916-2/N-R1-AC 16 * * N N
5916-2/W-R1-AC 16 * * W N
5916-2/N-R2-AC 16 * * N N
5916-2/W-R2-AC 16 * * W N
5916-2/N-R3-AC 16 * * N N
5916-2/W-R3-AC 16 * * W N
5940-1/N-R1-AC-CE 40 * * N Y
5940-1/W-R1-AC-CE 40 * * W Y
5940-1/N-R2-AC-CE 40 * * N Y
5940-1/W-R2-AC-CE 40 * * W Y
5940-1/N-R3-AC-CE 40 * * N Y
5940-1/W-R3-AC-CE 40 * * W Y
5940-2/N-R1-AC 40 * * N N
5940-2/W-R1-AC 40 * * W N
5940-2/N-R2-AC 40 * * N N
5940-2/W-R2-AC 40 * * W N
5940-2/N-R3-AC 40 * * N N
5940-2/W-R3-AC 40 * * W N
CE Certification
80 MHz)
Model Number Price
5908-1/N-R1-48-CE 8 * * N Y
5908-1/W-R1-48-CE 8 * * W Y
5908-1/N-R2-48-CE 8 * * N Y
5908-1/W-R2-48-CE 8 * * W Y
5908-1/N-R3-48-CE 8 * * N Y
5908-1/W-R3-48-CE 8 * * W Y
5908-2/N-R1-48 8 * * N N
5908-2/W-R1-48 8 * * W N
5908-2/N-R2-48 8 * * N N
5908-2/W-R2-48 8 * * W N
5908-2/N-R3-48 8 * * N N
5908-2/W-R3-48 8 * * W N
5916-1/N-R1-48-CE 16 * * N Y
5916-1/W-R1-48-CE 16 * * W Y
5916-1/N-R2-48-CE 16 * * N Y
5916-1/W-R2-48-CE 16 * * W Y
5916-1/N-R3-48-CE 16 * * N Y
5916-1/W-R3-48-CE 16 * * W Y
5916-2/N-R1-48 16 * * N N
5916-2/W-R1-48 16 * * W N
5916-2/N-R2-48 16 * * N N
5916-2/W-R2-48 16 * * W N
5916-2/N-R3-48 16 * * N N
5916-2/W-R3-48 16 * * W N
Part Number
or Ordering
Description Comment Code
Cable, Serial Conv-PC, (DB-9S) 2 m Incl in transceiver system 08-05301-002
Cable, Coax 50 Ohm N-N Plug 2 m 08-05366-020
Cable, Coax 50 Ohm N-N Plug 3 m 08-05366-030
Cable, Coax 50 Ohm N-N Plug 5 m 08-05366-050
Cable, Coax 50 Ohm N-N Plug 8 m 08-05366-080
Cable, Heliax N-N 10-15GHz 2 m Incl in transceiver system 08-05597-020
Cable, Heliax N-N 10-15GHz 3 m * 08-05597-030
Cable, Heliax N-N 10-15GHz 4 m * 08-05597-040
Cable, DC Power (Rd/Bk) 5 m Incl in LP transceiver system 08-05634-005
Cable, HP SSPA to Converter 2,0 m Incl in transceiver system 08-05857-020
Cable, HP SSPA to Converter 3,0 m * 08-05857-030
Cable, HP SSPA to Converter 4,0 m * 08-05857-040
Cable, AC 3 core 24/0, 20 8 m Incl in LP AC transceiver system 08-05862-010
Cable, Converter to SSPA Connector 2 m Incl in transceiver system 08-05887-020
Cable, Converter to SSPA Connector 3 m * 08-05887-030
Cable, Converter to SSPA Connector 4 m * 08-05887-040
Cable, DC Pwr SSPA - Converter 2 m Incl in HP transceiver system 08-05961-002
Cable, DC Pwr SSPA - Converter 3 m * 08-05961-003
Cable, DC Pwr SSPA - Converter 4 m * 08-05961-004
Cable, AC Mains 5 m Incl in HP transceiver system 08-06201-005
Power Supply Pole Mount Kit 8"/200 mm pole Incl in LP AC transceiver system 15-40128
Power Supply Pole Mount Kit 12"/300 mm pole * 15-40147
Flex Waveguide WR75, 36" 15-40163
Flange Kit, WR75, Thin Groove Incl in LP transceiver system 15-40173
Kit, WR75 W/G Adaptor Incl in transceiver system 15-40183
Kit, Conv Mounting, HP SSPAs Incl in HP transceiver system 15-40196-000
Kit, Connector Sealing Incl in transceiver system 15-40202
Kit, Boom Mounting Incl in LP transceiver system 15-42000-000
Kit, Wg-WG Mtg PBR120 Ku-Band SSPA Incl in HP transceiver system 15-42029-000
Kit, SSPA Hub Mounting Incl in HP transceiver system 15-42031-000
Manual, Ku-Band Transceiver Reference Incl in transceiver system 15-44005-EN
Hand-held Controller 5560 5560
Remote Controller package 5570, 100m cable * 5570-100
Remote Controller package 5570, 50m cable 5570-50
Hex Driver, 3mm (M4) (Allen Key) Incl in LP transceiver system 75-30504-107
Hex Driver, 2.5 x 75 with handle Incl in transceiver system 75-31400-002
TRF, 13,75—14,50GHz c/w flange kit TRF-Ku
* Non-core products
The following list of product packages should only be used to order modules for replacement or
upgrade purposes.
To order complete transceivers, please use the transceiver ordering codes shown on pages
13 and 14.
* Non-core products
The transceiver redundancy switching systems ordering code format is designed to provide unambiguous
identification of the various redundancy systems available.
The system configuration required depends on the particular transceiver and options as follows:
SSPA RF output connector: N-type coaxial (C-Band only) or Waveguide (C-Band and Ku-Band)
The transceiver redundancy system model number format is shown below. The model number comprises
the base model number plus groups of option letters/numbers to specify the particular configuration.
The first group of characters specifies the fundamental frequency band of the system and the second
group specifies the SSPA RF output connector option. The last group specifies the transceiver power
range as the medium and high power systems have SSPA mechanical differences.
Frequency band:
- C for C-Band
- Ku for Ku-Band
Ku-Band systems
Part Number
or Ordering
Description Comment Code
Cable, 6-way Rx Waveguide Switch 5m Incl in all systems 08-05158-005
Cable, 6-way Tx Waveguide Switch 5m Incl in C-Band W/G and Ku-Band sys 08-05159-005
Cable 19-way MIL-conn (P) to (S) 5m Incl in all systems 08-05160-005
Cable, Coax 50 Ohm N-N Plug 1 m Incl in N-type and HP C-Band sys 08-05366-010
Cable, Coax 50 Ohm N-N Plug 2 m 08-05366-020
Cable, Coax 50 Ohm N-N Plug 3 m 08-05366-030
Cable, Coax 50 Ohm N-N Plug 5 m Incl in all systems 08-05366-050
Cable, Coax 50 Ohm N-N Plug 8 m 08-05366-080
Cable, Aux Power HP Redundancy Incl in all HP systems 08-05641-001
Flange Kit WR137 Full Thickness Gasket c/w nuts Incl in HP C-Band systems 15-40096
Flange Kit WR229 Full Thickness Gasket c/w 16mm
screws Incl in C-Band systems 15-40106
Flange Kit WR229 Half Thickness Gasket c/w 12mm
screws Incl in C-Band systems 15-40107
Flange Kit WR229 Half Thickness Gasket c/w 8mm
screws Incl in C-Band systems 15-40108
Flange Kit WR137 Half Thickness Gasket c/w 12mm
screws Incl in C-Band W/G systems 15-40123
Red Controller Pole Mount Kit 8"/200 mm pole Incl in all systems 15-40128
Flange Kit, WR75, Thick Groove Incl in Ku-Band systems 15-40172
Flange Kit, WR75, Thin Groove Incl in Ku-Band systems 15-40173
Flange Kit, WR75, Universal Incl in Ku-Band systems 15-40174
Kit, Conv Mounting, HP SSPAs Incl in HP systems 15-40196-000
Kit, Connector Sealing Incl in all systems 15-40202
Mounting Redundant Converters when
rd
Kit, Mounting Redundant Converters used with 3 Party SSPAs 15-42069-000
Manual, C-Band Transceiver Switching Eq Included in C-Band systems 15-44003-EN
Manual, Ku-Band Transceiver Switching Eq Included in Ku-Band systems 15-44007-EN
Adaptor, N 90 degree male-female Incl in C-Band N-type systems 60-15863-945
Cable, 2-core screened, 7/0, 50 (10 m) 10m Incl with std systems 67-60202-801
Adaptor WR137 Waveguide to N Type Incl in C-Band LP W/G systems 78-01001-005
Attenuator, 30dB, 50W N DC to 8.5 GHz Incl in C-Band LP systems 78-01101
Waveguide Switch, WR137 (C-Band Tx) Incl in C-band W/G-type systems 78-18005-002
Waveguide Switch, WR229 (C-Band Rx) Incl in C-band W/G-type systems 78-18005-003
Waveguide Switch, Dual WR229/ N-type (C-Band Tx/
Rx) Incl in C-band N-type systems 78-18005-004
Waveguide Switch, WR75 (Ku-Band Tx or Rx) Incl in Ku-Band systems 78-18008
Waveguide Bend 90d WR137 3” x 3” Incl in C-Band W/G systems 78-23011-001
Waveguide, Rigid WR137 3” Incl in HP C-Band systems 78-23012
Waveguide, Jacket Flextwist WR137 12” Incl in HP C-Band systems 78-23014
Waveguide termination 125W WR137 Incl in LP C-Band systems 78-23015
Waveguide, Rigid WR75 2” Incl in Ku-Band systems 78-23018
Waveguide, Bend 90 deg WR75 3.2” x 2” Incl in Ku-Band systems 78-23019
Waveguide termination 25W WR75 Incl in LP Ku-Band systems 78-23020
Waveguide termination 75W WR75 Incl in HP Ku-Band systems 78-23021
Waveguide termination 300W WR137 Incl in HP C-Band systems 78-23027
Waveguide, Jacket extra Flextwist WR75 2.5” Incl in LP Ku-Band systems 78-23028
Waveguide, Jacket Flextwist WR75 18” Incl in HP Ku-Band systems 78-23029
Prices
Terms of Payment
Codan Limited means Codan Limited ABN 77 007 590 605, 81 Graves Street Newton, South
Australia, 5074.
Dealers/Customers can arrange to have pre-approved credit facilities with Codan. Please note
that the value of any outstanding orders combined with any outstanding payments due to Codan
by the Dealer/Customer must fall within the approved credit limit.
Alternately, if the Dealer/Customer does not have a pre-approved credit facility with Codan, the
Dealer/Customer must pay for the order at the time of placing the order.
Or
Please note that ownership of the goods will pass to the Dealer/Customer only when Codan
Limited has received full payment of the Purchase Price.
Method of Despatch
Codan Limited complies with INCOTERMS 2000 – ICC Publication No. 560.
Codan has an In-House Freight Forwarder who can deliver product to all main airports
throughout the world, and we would be happy to provide a freight quote for your orders. If you
choose to use your own Freight Forwarder, please provide full contact details of their Australian
Agent so that Codan Limited can liaise to have your goods collected in a prompt and efficient
manner.
Risk in the goods will pass to the Dealer/Customer upon collection of the goods by the Dealer/
Customer or by any carrier commissioned by the Dealer/Customer, or upon delivery to the
Dealer/Customer by any other means. Once Risk has passed to the Dealer/Customer, it is the
Dealer/Customer’s responsibility to insure the goods.
The nearest International Airport to our premises is in Adelaide, South Australia however we
also use Melbourne and Sydney airports for despatch of goods.
Packing
Our export packing is designed to International Export Standards to ensure safe delivery under
normal international airfreight handling conditions.
Beneficiaries Bankers: Australia and New Zealand Banking Group Limited, Adelaide
(for Letters of Credit) (Swift: ANZBAU5A), or
HSBC Bank Australia Limited, Adelaide (Swift: HKBAAU2SADL),
or your Main Australian Correspondent Bank in South Australia
Transhipment: Allowed
Charges: All other Bank charges outside the applicant’s country, including
confirmation charges are for the account of the Beneficiary,
excluding establishing Bank charges.
Codan Limited ('Codan') warrants that all equipment manufactured by Codan will be free
of faults arising from defects in design, workmanship or materials in accordance with
this express warranty.
Should any fault due to bad design, workmanship or materials be proven at any time within the
prescribed warranty period, Codan will, subject to the terms of this warranty as set out below,
remedy such fault free of charge provided the equipment is returned, carriage paid, to Codan or
to a service centre authorised by Codan.
The prescribed warranty period for equipment manufactured by Codan is three (3) years after
shipment from the factory. In addition, where Codan (or a service centre authorised by Codan)
repairs equipment or supplies spare parts, the prescribed warranty period for the repaired
equipment or spare parts is three (3) months after shipment to the customer.
This express warranty shall not extend to any abuse, accident or improper installation,
connection, adjustment or use of goods otherwise than in accordance with instructions issued
by Codan.
Subject to the matters set out in this express warranty, no liability expressed or implied, is
accepted for any consequential loss, damage or injury arising as a result of any fault in the
goods.
This express warranty does not extend to goods supplied by Codan, which are not designed or
manufactured by it. Codan will, however, make reasonable endeavours to ensure that the
purchaser receives the full benefit of any warranty given by the manufacturer.
This express warranty is valid for goods purchased from Codan anywhere in the world.
Warranty service will be provided in accordance with this express warranty in any country of the
world where there is a service centre authorised by Codan.
The benefits conferred by this express warranty are in addition to all other non-excludable rights
and remedies which the consumer may have under the Australian Trade Practices Act and any
similar laws in Australia or elsewhere. To the extent permitted by law, Codan’s liability for any
non-excludable condition or warranty is limited to (at Codan’s option):
(a) In the case of goods - repairing, replacing or supplying equivalent goods, or paying the cost
of any of those remedies; or
(b) In the case of services - supplying the services again or paying the cost of having the
services supplied again.
BUC product
ASIA PACIFIC EMEA AMERICAS
Codan Limited Codan (UK) Ltd Codan US, Inc.
ABN 77 007 590 605 Unit C4, Endeavour Place 8430 Kao Circle
81 Graves Street Coxbridge Business Park Manassas VA 20110
Newton SA 5074 Farnham Surrey GU10 5EH USA
AUSTRALIA UNITED KINGDOM
T: +61 8 8305 0311 T: +44 1252 717 272 T: +1 703 361 2721
F: +61 8 8305 0411 F: +44 1252 717 337 F: +1 703 361 3812
asiasales@codan.com.au uksales@codan.com.au ussales@codan.com.au
www.codan.com.au