Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DSEGenset
DSE4410/20
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITY
BS EN 61000-6-2
AUTO START & AUTO MAINS FAILURE EMC Generic Immunity Standard for
the Industrial Environment
CONTROL MODULES
BS EN 61000-6-4
EMC Generic Emission Standard for
the Industrial Environment
FEATURES ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment
DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the
control panel with the supplied sealing gasket.
4 2 3
DEUTZ
DSE4410/20 ISUZU
PERKINS
CATERPILLAR
MTU
7 VOLVO
CUMMINS
OTHER SCANIA
1ph 1 1 1ph
2ph 2ph
3ph 3ph
N N
ISSUE 4
®
DSEGenset
DSE4410/20
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING
MAGNETIC PICK UP
VOLTAGE RANGE
DSE4410 +/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
OUTPUTS
OUTPUT A (FUEL)
2 Amp DC at supply voltage
OUTPUT B (START)
2 Amp DC at supply voltage
FREQUENCY RANGE
3.5 Hz to 75 Hz
GENERATOR
KEY FEATURES • Engine pre-heat • Multiple engine parameters VOLTAGE RANGE
• CAN and magnetic pick-up/Alt. • Protected Solid State Outputs are monitored simultaneously 15 V - 333 V AC (L-N)
sensing versions (specify on (PSS) • Module can be configured to
FREQUENCY RANGE
ordering) • Advanced metering capability suit individual applications 3.5 Hz to 75 Hz
• 3 phase generator monitoring • Front panel/PC programming • Compatible with a wide range
• Four digital inputs/three • Hours counter of CAN engines DIMENSIONS
OVERALL
analogue inputs • LED indicators • IP65 rating offers advanced 180 mm x 116 mm x 42 mm
• Six outputs (all six configurable • Back-lit character icon LCD resistance to water ingress 7.1” x 4.6” x 1.7”
on CANbus version, four display when the gasket is fitted
PANEL CUT-OUT
configurable on magnetic pick- • License-free PC software. 154 mm x 98 mm
up version) KEY BENEFITS 6” x 3.9”
• Three phase sensing • Automatically transfers between
MAXIMUM PANEL THICKNESS
• Event log (5) mains (utility) and generator 8 mm (0.3”)
• 50/60 Hz calibration setting power (DSE4420 only)
• Configurable timers • Hours counter provides
• Automatic shutdown or warning accurate information for
when fault conditions are monitoring and maintenance
detected periods
• Overspeed protection • User-friendly set-up and button
• Manual and remote start layout
RELATED MATERIALS
TITLE PART NO’S
DSE4410 Installation Instructions 053-078
DSE4420 Installation Instructions 053-079
DSE4400 Quick Start Guide 057-103
DSE4400 Operator Manual 057-111
DSE4400 Configuration Suite PC Manual 057-093
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-068/01/16 (5)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457