Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
nated in or passed through another ASTA. This call pattern is deadlock-prone and disallowed by apartment call control.
ngle threaded
incomplete.
been disabled.
tiation is malformed.
apartment shutdown.
e are external clients.
n this computer.
flict. The published components in this deployment type are still published by other deployment types. This deployment type will be alway
w memory etc.
disappeared; all connections are invalid. The call did not execute.
eaded mode.
r unknown format.
ustom marshalled calls and on the client side of the call.
e trustee string
e string provided by the user
eady exists.
ry is not correct.
ministrator.
ectory does not match the required schema.
bitmap to a DIB
DIB to a bitmap.
he COM+ Admin SDK
OM+ Admin SDK
system specified
ers registered
ights to read recognizer information
ported by the recognizer
ed to execution policy not being set to Bypass for power shell in agent settings
ed to execution policy. Please upgrade power shell or set Execution Policy in Client Agent settings
n operation
nternal error
to complete the installation
b is allowed at a time.
bedded object.
AMENDED_QUALIFIERS is specified
numeration
requested operation can succeed
s operation. Please adjust your IWbemServices proxy security settings and retry.
cted namespace.
r out of range.
Please try again later.
ask did not run due to one of the constraints in the task definition.
versions of Windows.
ns to support the security functions relating to the created subscription instance. Contact the Domain Administrator to get this computer a
ithout quotes)
ing commit and abort boundaries cannot be supported by this transaction implementation or isoFlags was not equal to zero.
network transactions.
emote/network transactions.
action to the destination transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't hav
ction from the source transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have a
NA LU 6.2 transactions.
r was denied.
tion has been reached.
red with the specified transaction coordinator.
rce manager.
he protocol.
tion Coordinator
on to work correctly.
onfigured for it.
created is stronger than the TxIsolationLevel for the "root" component for the transaction. The creation failed.
en invocations of EnterTransactionScopeand ExitTransactionScope. This is not allowed. Cross-context calls cannot be made while inside of a
not make a corresponding call to ExitTransactionScope before returning.
it is not signed.
another process.
s locked a portion of the file.
erial Number: %3) into drive %1.
k path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path contact your networ
he network. If joining a domain go to System in Control Panel to change the computer name and try again. If joining a workgroup choose an
as exceeded.
this time because there are already as many connections as the computer can accept.
eration other than raw disk I/O.
nning of the file.
t substituted.
tuted drive.
y on the same drive.
or dynamic-link module.
ws you're running. Check your computer's system information and then contact the software publisher.
rst add the web site to your trusted sites list browse to the web site and select the option to login automatically.
ins a virus or potentially unwanted software.
cannot be opened. Due to the nature of this virus or potentially unwanted software the file has been removed from this location.
m is corrupt.
tended Attribute (EA) in the same operation.
e device's granularity/alignment.
nd operation.
er set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFF
set installed on the system.
on is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.
on the volume but it is out of the scope of the handle used for the operation.
not written correctly. The stack pointer has been left in an inconsistent state._x000D_The entrypoint should be declared as WINAPI or STD
not written correctly. The stack pointer has been left in an inconsistent state._x000D_The callback entrypoint should be declared as WINA
maximum size allowed for the system part of the registry. Additional storage requests will be ignored.
callback is active.
user account._x000D_Please choose a longer password.
passwords too frequently._x000D_This is done to prevent users from changing back to a familiar but potentially discovered password._x000
have used in the past._x000D_The policy of your user account does not allow this. Please select a password that you have not previously u
od for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows please
s relocated in memory. The application will not run properly._x000D_The relocation occurred because the DLL %hs occupied an address ra
alize because the window station is shutting down.
equired by client.
ort standby mode. Updating this driver may allow the system to go to standby mode.
w on virtual memory. Windows is increasing the size of your virtual memory paging file._x000D_During this process memory requests for s
rly signed._x000D_The file has been replaced with the signed file._x000D_The system has been shut down.
ng the device configuration._x000D_This may be caused by a failure of your hardware or by a poor connection.
st one mount point which resolves to a volume to which the specified device object is not attached.
or is not attached to the volume specified by the file name.
eventlog for additional information.
s awakened by an interrupt.
atically closed as a result of the requested operation.
st (ACL) contained more information than was expected.
ready exists for the registry sub-tree but that a transaction commit was previously aborted._x000D_The commit has NOT been completed b
dentifier (GUID) to a Windows security ID (SID) no administratively-defined GUID prefix was found._x000D_A substitute prefix was used wh
%hs_x000D_was corrupted and it has been recovered. Some data might have been lost.
module %hs. This may be insecure. An alternative %hs is available. Should the application use the secure module %hs?
hs. This is secure but may be incompatible with previous releases of the operating system. An alternative %hs is available. Should the applic
e pending state.
was changed to 'No Access' and the page was unlocked from memory and from the process.
but is for a machine type other than the current machine.
eady exists for the registry sub-tree but that a transaction commit was previously aborted._x000D_The commit has now been completed.
d due to closing the handle which made the notify change request.
s made to connect to the remote server %hs on the primary transport but the connection failed._x000D_The computer WAS able to conne
ld enter %4.
l the data for the file %hs; the data has been lost._x000D_This error may be caused by network connectivity issues. Please try to save this fi
l the data for the file %hs; the data has been lost._x000D_This error was returned by the server on which the file exists. Please try to save t
l the data for the file %hs; the data has been lost._x000D_This error may be caused if the device has been removed or the media is write-p
ng corruption records in them. The volume contains detected corruptions and must be scanned.
no longer contains real corruptions.
because no more new names could be created in the recovery directory. Files must be moved from the recovery directory.
ted with a different handle.
k of a lower level may be available.
cause an oplock to be broken. The caller has requested that existing oplocks not be broken.
osed. The oplock is now broken.
rent address from the one specified in the image file but fixups will still be automatically performed on the image.
ompleted because the file has not been opened for data access.
_Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
pened file is no longer valid.
subkeys or values.
n is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
rvices are dependent on.
timely fashion.
e display name.
unt specified for other services running in the same process.
nager._x000D_Therefore the service control manager cannot take action if this service's process terminates unexpectedly.
as in progress.
(IRQ) with other devices. At least one other device that uses that IRQ was already opened.
erial port._x000D_(The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
expired._x000D_(The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
proper alignment.
nother application or driver.
e system supports.
me user using more than one user name are not allowed. Disconnect all previous connections to the server or shared resource and try again
er but there are already too many sessions established to that server.
omputer on the network.
it on the number of concurrent connections for this account has been reached.
he KDC certificate during smartcard logon. There is more information in the system event log.
to utilize the smartcard subsystem.
authentication request. Please try again later.
orce option.
application. This overrun could potentially allow a malicious user to gain control of this application.
on can operate on.
se the object is in the process of being deleted.
elay-loaded .dll failed.
ute 16-bit applications. Check your permissions with your system administrator.
process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with
bel of an object.
as returned.
er password. The LAN Manager password returned is a NULL string.
gon request.
een terminated.
pecified group or the specified group cannot be deleted because it contains a member.
oup account.
on account being disabled deleted or unable to logon.
rent password is incorrect.
w password contains values that are not allowed in passwords.
w password does not meet the length complexity or history requirements of the domain.
or example: blank passwords aren't allowed sign-in times are limited or a policy restriction has been enforced.
n right now.
o associated security.
controller either because the machine is unavailable or access has been denied.
y (LSA) server was in the wrong state to perform the security operation.
er of the domain.
quested operation.
of connections. No more connections can be made to the service at this time because there are already as many connections as the servic
edit control.
e must have the same parent.
mbolic links.
ompartment.
e remote host.
service. A reboot might be required.
d process is not a GUI process.
r support personnel.
hat the source exists and that you can access it.
nstaller service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
port personnel.
up space on the drive or verify that you have write permission on the Temp folder.
e. Contact your product vendor.
ate package exists and that you can access it or contact the application vendor to verify that this is a valid Windows Installer update packag
tion vendor to verify that this is a valid Windows Installer update package.
taller service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
of this version cannot continue. To configure or remove the existing version of this product use Add/Remove Programs on the Control Pan
r SDK for detailed command line help.
re server software during a Terminal services remote session. If you want to install or configure software on the server contact your networ
will be restarted so the changes can take effect.
ice because the program to be upgraded may be missing or the upgrade may update a different version of the program. Verify that the pro
triction policy.
ote Desktop Connection.
rtised products. At least one feature of the product must be installed before applying the update.
Please try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state.
voked and the process will be terminated immediately.
sion of Windows.
ode generation.
unique identifier (UUID).
an 512 bytes.
uring a remote procedure call.
account for this workstation trust relationship.
usted domain failed.
ry domain failed.
logged on to.
ation firewall. The specified account is not allowed to authenticate to the computer.
cy set on your machine.
ed memory segment.
er of the domain.
s. Check the minimum password length password complexity and password history requirements.
ity database.
he name may already exist on the network.
nger service.
maximum number.
the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resolve DNS names in the target d
ve access to the specified path location and permissions to modify its contents. Running as an elevated administrator may be required.
uirement for this operation. Please select a domain controller capable of issuing claims.
AP. Please select an LDAP-capable domain controller.
this operation could not be located. Please ensure that a domain controller capable of issuing claims is available.
provisioning.
er computer.
as_x000D_a member of a domain. The Netlogon service does not need to run in this_x000D_configuration.
er of its domain._x000D_However the computer %1 is currently claiming to be the primary domain controller_x000D_of the domain.
serial number.
gment for network control blocks (NCBs). The error code is the data.
_segment for network control blocks (NCBs). The error code is the data.
e from NetServiceControl is the data.
000D_path %1. The system error code is the data.
NCB is the data.
e data shown is in this format:_x000D_DWORD approx CS:IP of call to ioctl or fsctl_x000D_WORD error code_x000D_WORD ioctl or fsct
error code is the data.
00D_file %1. The system error code is the data.
e is the data.
he SMB is the data.
could not be started.
00D_overflow.
0D_than net buffers are sized so that too much memory is needed.
in Controller %1 for the domain %2_x000D_failed because %1 does not support signing or sealing the Netlogon_x000D_session._x000D__
ANMAN.INI file.
logged off at this time your session will be_x000D_disconnected and any open files or devices you_x000D_have open may lose data.
minutes to log off or you will be disconnected.
tion may cause you to lose data.
D_Stopping the %1 service will also stop these services.
ation devices.
e a new one.
TE]_x000D_AT time [/EVERY:date | /NEXT:date] command_x000D__x000D_The AT command schedules a program command to run at a_x
g the database.
completed.
y been carried out.
ily blocked due to recent errors.
se on the network. The local interface will be disabled until the DHCP client can obtain a new address.
MI data provider.
data provider.
been registered.
this parameter.
east one drive in the library reports it can support this media type.
enabled drives are present which can be used.
ord or_x000D_press ENTER if it is for domain %1:
n be updated.
attempted.
odified or deleted.
up is not online.
is not the owner of the resource or the node is not a possible owner of the resource.
is not the owner of the group or the node is not a possible owner of the group.
urce monitor.
ce monitor.
ource is online.
ecause it is the quorum resource.
source because it is not capable of being a quorum resource.
e requested operation.
until the next time the resource is brought online.
source because it does not belong to a shared storage class.
ter communication between two or more active cluster nodes. The internal communication capability cannot be removed from the netwo
ide service to clients. The client access capability cannot be removed from the network.
roup containing the quorum resource.
his may be due to version inconsistencies or due to the absence of the resource DLL on this node.
DLL. This may be due to a bad (or changed) name supplied to the resource DLL.
roup is not in the preferred list for the group. To change the owner node for the group move the group.
ce number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was chang
rformed while the resource is in its current state. This may happen if the resource is in a pending state.
global updates.
ller for_x000D_the %2 domain. One of the servers should be removed from the_x000D_domain because the servers have different securit
000D_controller for the %3 domain. One of the servers should be_x000D_demoted or removed from the domain.
0D_the trust relationship established by the %3 domain. However the_x000D_computer lost the correct security identifier (SID)_x000D_wh
was:_x000D_%1._x000D_%2_x000D_A full dump was not saved.
was:_x000D_%1._x000D_%2_x000D_A dump was saved in: %3.
an indirect_x000D_trust.) However %1 and %2 have the same machine security identifier_x000D_(SID). NT should be re-installed on eithe
an indirect_x000D_trust.) However %2 is not a valid name for a trusted domain._x000D_The name of the trusted domain should be change
ty_x000D_database.
0D_local or network security database.
000D_structures successfully. The service was terminated. The following_x000D_error occurred: _x000D_%1
e_x000D_following error occurred: _x000D_%1
00D_service was terminated. The following error occurred: _x000D_%1
%1 due_x000D_to the following error: _x000D_%2
00D_service controller. The service was terminated. The following_x000D_error occurred: _x000D_%1
%1_x000D_database changes is inconsistent. The Netlogon service is resetting_x000D_the change log.
llowing_x000D_error occurred: _x000D_%2
_x000D_The server can be either a Windows 2000 Server that is a member of the_x000D_domain or the server can be a LAN Manager ser
a LanMan_x000D_BDC. Either delete some of your global groups or remove the LanMan_x000D_BDCs from the domain.
g reason: _x000D_%2
x000D_file permissions. These accounts are the RPLUSER local group_x000D_and the user accounts for the individual RPL workstations.
be_x000D_missing or corrupted. Service will attempt restoring the database_x000D_from the backup.
_x000D_will not start.
another node.
performing another operation.
IPv6 address is required and it must match a cluster network. Compatibility addresses are not permitted.
was attempted.
in the cluster. The number of bytes transmitted was less than required.
a it represents.
on was attempted while a transaction was already in progress.
mmit a cluster database transaction while no transaction was in progress.
ith one or more property values associated with its dependent resource(s).
re incompatible.
hanged while the cluster is in disk-only quorum mode or because changing the node weight would violate the minimum cluster quorum req
sks must have at least one partition that is formatted with NTFS or REFS.
mplete this action.
s currently loaded.
overy certificate.
er key buffer than the one on the destination file.
stem account to function properly. Individual tasks may be configured to run in other accounts.
e archive tail.
ot in a valid format.
ot a valid handle to a transaction object.
it was not found.
ecause it was not found.
t was not found.
because it was not found.
ts associated TransactionManager is not online. The TransactionManager must be brought fully Online by calling RecoverTransactionMana
bjects contained in its logfile in the Ob namespace. Therefore the TransactionManager was unable to recover.
ect could not be completed because the Transaction object specified for the enlistment is a subordinate branch of the Transaction. Only th
ager has been closed the handle is no longer valid.
or enlistment because the enlistment was not created with the corresponding completion response in the NotificationMask.
ecord that would be logged was too long. This can occur because of two conditions: either there are too many Enlistments on this Transacti
sible that some portion of the transaction tree did not commit successfully due to heuristics. Therefore it is possible that some data modifi
by another transaction.
not started or was shut down due to an error.
een deleted by a Transaction Savepoint Rollback.
ger's log failed. The failure status has been recorded in the event log.
nder a transaction is not supported.
t be superseded.
andler has not been initialized.
er to enlist but the transaction was set to disallow it.
and may be opened for execute only by a transacted reader.
ransactions had not previously been frozen.
n. It may have been opened in a transactional resource manager that was subsequently forced to restart. Please close the handle and ope
esource manager is not enlisted in the transaction.
system path.
ote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.
o mode is not supported by the current client.
graphics mode is not supported.
act your administrator.
console. This is most often the result of a driver or system DLL requiring direct console access.
This may be because the session is disconnected or does not currently have a user logged on.
ted. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a un
ted. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please contact your system
connections are in use right now. Try connecting later or contact your system administrator.
logon request is denied.
urred in the Windows video subsystem. Try connecting again later or contact the server administrator for assistance.
t permitted.
nt on the object.
rvice. The directory service is therefore unable to issue referrals to objects outside this forest.
g low on memory.
available or does not support the operation. Some part of the directory is currently not available.
h between the servers involved.
already exists.
d instance type.
d to another server.
e directory service.
ect is missing.
to see name.
tput format.
ain was found.
ng at the client without going out to the wire.
was available.
ASCII characters.
ibute that has no corresponding forward link.
on the object's epoch number. Either source or destination does not have the latest version of the object.
on the object's current name. Either source or destination does not have the latest version of the object.
re identical. Caller should use local move operation instead of cross-domain move operation.
eement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container.
e destination naming context.
on the identity of the source object. Either source or destination does not have the latest version of the source object.
leted by the destination server. The source server does not have the latest version of the source object.
FSMO is already in progress.
of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the syst
er because cross-domain moves for this class are disallowed or the object has some special characteristics e.g.: trust account or restricted R
ies as once moved this would violate the membership conditions of the account group. Remove the object from any account group membe
r naming context head not of an interior node.
me because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming m
a mandatory attribute from an existing class or adding an optional attribute to the special class Top that is not a backlink attribute (directly
t the schema FSMO Role Owner.
ntainer. You can only create attribute-schema and class-schema objects under the schema container.
e on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not hav
te in the SCHEMA section of the file schema.ini in the system32 directory.
s security-enabled.
security-enabled.
a member.
sabled group.
on a class-schema object.
lowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers)
t the Service Principal Name values could not be kept in sync.
y was found.
ward links can only have syntax 2.5.5.1 2.5.5.7 and 2.5.5.14 and backlinks can only have syntax 2.5.5.1
acy or better.
following error: %1._x000D_Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for deta
ema incompatibility.
vious schema incompatibility.
e source or the destination has not yet received information regarding a recent cross-domain move operation.
st domain controllers that still host this domain.
talog server.
e same domain.
of security reasons.
e too many modifications being processed currently.
aming contexts.
use the provided hostname is not in the necessary format.
ceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have t
ring tree delete operations. The tree delete may have been partially performed.
or: %1._x000D_Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system furthe
following error: %1._x000D_Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the
urrent AD DS forest functional level or AD LDS Configuration Set functional level. You must upgrade to a new version of the operating system
with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a doma
longer supports the current AD DS Forest functional level or AD LDS Configuration Set functional level. You must raise the AD DS Forest fun
longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain c
ncompatible with the functional level of the domain or forest.
to the requested value because there exist one or more domain controllers in the domain (or forest) that are at a lower incompatible functi
alue since one or more domains are still in mixed domain mode. All domains in the forest must be in native mode for you to raise the fores
s to be recreated.
a remote server. Make sure at least one server is running for the partition in question.
r partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context.
h to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attr
because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress).
hange in the server extensions information.
main Naming Master FSMO. The operation's error is in the extended data.
h to mutually authenticate the target server because the server's domain has been deleted from the forest.
e retrieved.
ct may not exist because it may have been deleted and already garbage collected.
the requested group type.
not allowed.
ups is not allowed.
ectory partition has not replicated successfully with at least one replication partner.
ontainer cannot already be a special container.
because a domain rename operation is in progress.
ested partition name. The partition hierarchy must be created in a top down method.
the time since the last replication with this server has exceeded the tombstone lifetime.
e system container.
e client is not processing the results of its requests fast enough. No more requests will be processed until the client catches up. If the clien
m was too busy to execute the request within the schedule window. The replication queue is overloaded. Consider reducing the number o
policy is available on the hub domain controller. Please retry at a later time to account for replication latencies.
e specified account.
o the DNS server. Zone signing will not be operational until this error is resolved.
ata protection. Zone signing will not be operational until this error is resolved.
will not be operational until this error is resolved.
ay not be operational until this error is resolved.
ersion. Zone signing will not be operational until this error is resolved.
r listed as the current key master for this zone is down or misconfigured. Resolve the problem on the current key master for this zone or us
nt user-provided salt or use a randomly generated salt and attempt to sign the zone again.
Choose a different algorithm or use NSEC3.
namespace has been delegated to another server.
rver IP addresses.
nal message buffer or some other network limit or the buffer used to receive a datagram into was smaller than the datagram itself.
ot support the semantics of the socket type requested.
ed in a getsockopt or setsockopt call.
m or no implementation for it exists.
address family.
ct referenced.
r no implementation for it exists.
socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.
socket had already been shut down in that direction with a previous shutdown call.
not properly respond after a period of time or established connection failed because connected host has failed to respond.
vely refused it.
nd means that the local server did not receive a response from an authoritative server.
was found.
uffer in general.
FLOWDESCRIPTOR.
he QOS provider-specific buffer.
OS structure.
rk Security Administrator about installing a valid certificate in the appropriate Certificate Store.
es not have a private key. IPsec certificates require a private key. Contact your Network Security administrator about replacing with a certifi
R_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal
SEC_IKE service (QueryCredentialsAttributes).
The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters.
mmon cause for this is if the IKE negotiation took too long to complete. If the problem persists reduce the load on the faulting machine.
a real failure.
below the Windows 2000 configured minimum value. Please fix the policy on the peer machine.
connection is in progress
acket characteristics.
queue because the maximum number of queues allowed by policy has been reached.
figuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
mat information.
rrent encoding.
an XML document.
nd attribute value.
of execution is corrupt.
as become corrupt.
tly activated one.
urrent thread of execution.
comma more than two unnamed attributes missing attribute name or missing attribute value.
med. Either a dollar sign ($) was followed by something other than a left parenthesis or another dollar sign or an substitution's right parenth
eing cleared or rolling over after the query result was created. Users should handle this code by releasing the query result object and reissu
ation if it itself evaluates to a node set and is not already part of some other change of scope operation.
esent an element set.
ttributes nodes or variables and right hand side arguments must be constants.
of a predicate an algebraic expression against which to test each node in the node set identified by the preceeding node set can be evalua
d direct channel. The channel must first be disabled before performing the requested operation.
lid type is outside of valid range can't be updated or is not supported by this type of channel.
alid type is outside of valid range can't be updated or is not supported by this type of publisher.
le. This usually occurs when the publisher is in the process of being uninstalled or upgraded.
used to forward events to. The log must first be enabled before the subscription can be activated.
y of the subscription can't contain target log of the subscription.
ential store.
to pass validation.
d version or missing required item.
ot have default or neutral resource..
have a CoreWindow.
ot valid anymore.
comply with the ACCESS.bus 3.0 DDC/CI 1.1 or MCCS 2 Revision 1 specification.
d version value.
aims to support.
match the MCCS version the monitor reports when the VCP Version (0xDF) VCP code is used.
upport the MCCS 1.0 specification MCCS 2.0 specification or the MCCS 2.0 Revision 1 specification.
Plasma and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Re
mperature that the current monitor did not support. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 spec
ple indistinguishable devices potentially matching the identification criteria.
service_x000D_must not be higher than the run level of its dependent services.
lly since_x000D_one or more services will not stop or restart within the specified timeout.
the package was blocked. Check the AppXDeployment-Server event log for details.
on to fix the problem.
be read. Please contact your system administrator with the contents of your AppModel Runtime event log.
d. Please contact your system administrator with the contents of your AppModel Runtime event log.
plication or product.
ending verification.
n the program. The program execution will be retried if the retry count has not been exceeded.
ram for example when creating the program execution environment making a network connection impersonating the user determining the
on for the launched program and the program execution will not be monitored.
am may retry if the maximum retry count has not been reached.
d parameters.
for example when creating the program execution environment making a network connection impersonating the user determining the file
and it is not.
pto but it is not supported on the local machine.
enticated attribute.
ed attributes.
e certificate.
se the revocation server was offline.
e or delimiter.
e character strings. Most likely it is either a CERT_RDN_ENCODED_BLOB or CERT_RDN_OCTET_STRING.
d. However there is already a signature present. A complete signing operation must be done.
se session but there are already too many active sessions. The server may need to be configured to allow additional sessions.
aller. The certificate template must be configured to require at least one signature to authorize the request.
mplate version.
n or issuance policies. The request is missing one or more required valid signatures.
ernate name.
to the Subject Alternate name.
ect Alternate name.
t key archival is not enabled for the specified certificate template.
e specified certificate template.
bject or Subject Alternate name.
cation authority could not be found.
tificate validity period. The template should be reconfigured or the CA certificate renewed.
one RA signature is allowed.
c key but the request uses a different public key.
sement key information supplied in the request or the information is inconsistent.
tity Key Id Binding.
station data.
d in the certificate template.
ttestation data.
use the encryption certificate has expired or the certificate or key is unavailable.
expected or incorrect.
r an invalid one was submitted.
d the response.
ed or is malformed.
financial extensions.
pecified trust provider.
wn by the specified trust provider.
fying against the current system clock or the timestamp in the signed file.
ed as a CA or vice versa.
g conventions.
ble at this time.
nstallation is complete.
this device.
n of Windows.
registry database.
urned data.
ons outstanding.
ntly in the device.
roperly interpreted.
or shut down.
d. Retry the operation.
s operation.
TR configuration conflicts.
on or an application proxy
e been imported)
ven request.
sion of server.
equired the source.
opriate state.
wnload requests.
ot be determined.
mpleted is unexpected.
ownloaded or installed.
uired by the update.
d or the cookie was invalid; refresh the state of the internal cache and retry.
quest due to invalid syntax.
er authentication.
declined to fulfill it.
d URI (Uniform Resource Identifier).
tication cookies.
manager was unable to connect the Background Intelligent Transfer Service (BITS).
nspecified Background Intelligent Transfer Service (BITS) transfer error.
rce of the download has changed.
anged in a new revision.
ads by update size for the update service.
WU_E_DM_* error code.
ge was invalid.
ge requires a greater version of the Windows Update Agent.
a table column that requires a non-null value.
ce to missing license terms file localized property or linked row.
ld not be recognized.
e or more services.
nt revision IDs.
e data store.
service has expired.
atory update or because it was deployed with a deadline.
ster it with Automatic Updates was declined because it is a built-in service and/or Automatic Updates cannot fall back to another service.
articular class.
rently disabled.
m with required specifications.
ters is missing.
mplete installation.
up handler failed during execution.
istry contains invalid information.
this release.
d not be completed because desktop composition is disabled.
oting}_x000D_The operation is not supported while running in a remote session.
was unable to provide a redireciton surface to complete the DirectX present.
0D_The window specified is not currently using queued presents.
can not find the adapter specified by the LUID.
e is larger than what is supported on this machine}_x000D_Redirection surface can not be created. The size of the surface is larger than w
ot match up.
FS file system.
finished uploading. Try again later.
peration failed.
e physical access.
uested action.
actual resource.
hen in FIPS mode.
n exceeded.
ort session.
e-out period.
dule support program.
ny open contexts.
too many open virtual resources.
requested operation.
gs. For provisioning to be successful one of several actions may be required. The TPM management console (tpm.msc) action to make the
ort the requested method.
on completing the provisioning call the Win32_Tpm WMI method for provisioning the TPM ('Provision') and check the returned Informatio
he request.
requested operation.
uested TPM operation (e.g. invalid TPM operation request BIOS communication error with the TPM).
settings. The system owner may be able to reconfigure the BIOS settings to allow the command.
s to win errors.
be fully provisioned to be operational.
pto Provider.
been written to the buffer.
pto Provider.
a different object.
when the start keyframe is reached.
n in the storyboard.
dimension.
not specify the same API in both the include list and the exclude list.
are or UNC path.
or API tracing.
hat the specified path is correct.
ust specify a full path to the executable and not just a filename.
orm Module (TPM). Contact the computer manufacturer for BIOS upgrade instructions.
record (MBR). Contact the computer manufacturer for BIOS upgrade instructions.
CD or DVD in your computer remove it restart the computer and turn on BitLocker again. If the problem persists ensure the master boot re
Drive Encryption. Use the Bootrec.exe tool in the Windows Recovery Environment to update or repair the boot manager (BOOTMGR).
with BitLocker Drive Encryption. Use the Bootrec.exe tool in the Windows Recovery Environment to update or repair the boot manager (BO
to be performed.
on. This condition may occur when two requests are issued at the same time. Wait a few moments and then try the action again.
he required attributes and classes to host BitLocker Drive Encryption or Trusted Platform Module information. Contact your domain admin
xpected. The BitLocker recovery information may be missing or corrupted.
pected. The BitLocker recovery information may be missing or corrupted.
values. The BitLocker recovery information may be missing or corrupted.
domain account that has the ability to write information to Active Directory objects.
main Services. Contact your domain administrator to verify that any required BitLocker Active Directory schema extensions have been insta
u can attempt to repair the drive to restore access.
gh free space. Delete any unnecessary data on the drive to create additional free space and then try again.
t information. Create a separate partition for use as the system drive that contains the boot information and a second partition for use as t
tion table. This drive may be corrupt or may have been tampered with. To use it with BitLocker you must reformat the partition.
hat you have provided the correct key and try again.
ng system drive until the auto unlock feature has been disabled for the fixed data drives and removable data drives associated with this co
tform Module (TPM) measurements. Use the Bootrec.exe tool in the Windows Recovery Environment to update or repair the boot sector.
matted with the NTFS file system in order to be encrypted. Convert the drive to NTFS and then turn on BitLocker.
ified before encrypting the drive.
viously encrypted drive. To encrypt this drive with BitLocker Drive Encryption remove the previous encryption and then turn on BitLocker.
because an encryption key is not available. Add a key protector to encrypt this drive.
D) in the computer. Remove the media and restart the computer before configuring BitLocker.
this type is allowed for this drive.
ath was specified. Recovery passwords must be saved to a fully qualified path. Environment variables configured on the computer can be u
other key protector.
cess the drive. An alternative recovery method such as recovery password a data recovery agent or a backup version of the recovery key m
cker recovery passwords are 48 digits. Verify that the recovery password is in the correct format and then try again.
local recovery password from being generated or used by BitLocker Drive Encryption. When operating in FIPS-compliant mode BitLocker re
e recovery password from being saved to Active Directory. When operating in FIPS-compliant mode BitLocker recovery options can be eith
nd on the USB device. Verify that you have the correct USB device that the USB device is plugged into the computer on an active USB port r
corrupt or invalid. Verify that you have the correct startup key or recovery password file and try again.
tup key or recovery password. Verify that you have the correct startup key or recovery password and try again.
be enabled initialized and have valid ownership before it can be used with BitLocker Drive Encryption.
anaged because this computer is currently operating in Safe Mode. While in Safe Mode BitLocker Drive Encryption can only be used for rec
drive. Either the system boot information changed after choosing BitLocker settings or the PIN did not match. If the problem persists after s
sted Platform Module (TPM).
sted Platform Module (TPM) and PIN.
on was enabled.
e BitLocker Drive Encryption was enabled.
he use of unencrypted keys which prevents BitLocker from being suspended on this drive. Please contact your domain administrator for mo
ecause the file system does not extend to the end of the drive. Repartition this drive and then try again.
g system drive. Contact the computer manufacturer for BIOS upgrade instructions.
yption. To use BitLocker Drive Encryption please upgrade the operating system.
ocker system files are missing or corrupted. Use Windows Startup Repair to restore these files to your computer.
mpersonated token.
he Trusted Platform Module (TPM) is enabled and ownership has been taken. If this computer does not have a TPM verify that the USB driv
ker Drive Encryption.
d. Use the bcdedit command-line tool to turn off boot debugging.
in a transient state.
asswords from being generated or used. Please contact your system administrator for more information.
system on the drive. BitLocker To Go discovery drives must be created on FAT formatted drives.
ter's Group Policy settings. Verify that Group Policy settings allow the creation of discovery drives for use with BitLocker To Go.
mart cards to be used with BitLocker Drive Encryption.
ate such as a smart card to be used with BitLocker Drive Encryption.
key protector with BitLocker Drive Encryption.
data drives to be automatically unlocked.
able data drives to be automatically unlocked.
Drive Encryption on removable data drives.
rive Encryption on removable data drives. Please contact your system administrator if you need to turn on BitLocker.
Encryption on removable data drives. Please contact your system administrator if you need to turn off BitLocker.
rements. By default passwords must be at least 8 characters in length. Check with your system administrator for the password length requ
t by your system administrator. Try adding upper and lowercase characters numbers and symbols.
ows System Recovery Options.
ause of conflicting Group Policy settings. BitLocker cannot be configured to automatically unlock fixed data drives when user recovery optio
ause of conflicting Group Policy settings. BitLocker cannot be configured to automatically unlock removable data drives when user recovery
ficate does not permit it to be used for BitLocker Drive Encryption. BitLocker does not require that a certificate have an EKU attribute but if
urrently configured because of Group Policy settings. The certificate you provided for drive encryption is self-signed. Current Group Policy s
f conflicting Group Policy settings. When write access to drives not protected by BitLocker is denied the use of a USB startup key cannot be
erminated conversion. This could be due to either all conversion logs being corrupted or the media being write-protected.
ause there are conflicting Group Policy settings for recovery options on operating system drives. Storing recovery information to Active Dire
ause there are conflicting Group Policy settings for recovery options on fixed data drives. Storing recovery information to Active Directory D
ause there are conflicting Group Policy settings for recovery options on removable data drives. Storing recovery information to Active Direct
ot permit it to be used for BitLocker Drive Encryption. BitLocker does not require that a certificate have a KU attribute but if one is configur
t be authorized. The private key authorization was either not provided or the provided authorization was invalid.
sing the Certificates snap-in.
ncryption included with Windows Vista and Windows Server 2008 which does not support organizational identifiers. To specify organizatio
d on this computer. Remove the automatic unlock protector to lock this drive.
CC smart cards is not supported by your smart card. The Group Policy setting requiring FIPS-compliance prevents BitLocker from using any
rusted Platform Module (TPM) and enhanced PIN. Try using a PIN containing only numerals.
n unknown type. If you are using an old version of Windows try accessing the drive from the latest version.
nd on the system.
e using the Certificates snap-in.
ctor certificate store.
are encryption.
rovide required input to unlock the volume.
ected. The user may not be able to provide required input to unlock the volume.
a pre-boot keyboard is not available on this device. The user may not be able to provide required input to unlock the volume.
ord but neither a pre-boot keyboard nor Windows Recovery Environment is available on this device. The user may not be able to provide re
word attempts.
ection requires a connected account. If you already have a connected account and are seeing this error please refer to the event log for mo
ounter is available on your PC.
is version of Windows. You can turn on BitLocker without using the encrypt on write mode.
word to Active Directory for this drive type. For more info contact your system administrator.
encrypted. Please try again later.
ly managed with device encryption.
the callout.
multiple NUMA nodes. This does not indicate a problem unless the performance of your virtual machine is unusually slow. If you are exper
the active plexes due to bad sectors.
They may or may not require reimport after fixing the hardware problems.
eing overloaded.
ntifier is in progress.
cation capability.
on credentials required to connect to the cloud notification service.
tification service.
ck screen updates.
or event handler.
n with another pointer type.
t unique or there is a discrepancy in timestamps frame ids pointer types or source devices.
devices don't match or frame ids are not unique or timestamps are out of order.
input device.
aged by the operating system.
actions are performed by the user.
or authentication.
ture device.
ed range of values.
ge of values.
ange of values.
ed operation.
r not registered
imulated deployment.
n operation
nternal error
to complete the installation
b is allowed at a time.
or this program which requires a computer restart.
n the program. The program execution will be retried if the retry count has not been exceeded.
e program. The program execution will not be retried.
ram for example when creating the program execution environment making a network connection impersonating the user determining the
on for the launched program and the program execution will not be monitored.
ssociated command line.
am may retry if the maximum retry count has not been reached.
am will not retry.
for example when creating the program execution environment making a network connection impersonating the user determining the file
nflict. The published components in this DT are still published by other DTs. This DT will be always detected as long as other DTs are still inst
000D_but has not yet completed.
ultiple alternatives requested target.
rent_x000D_URI.
edentials if any
000D_prompted
xits in the Database
arty encryption providers to support device encryption. Enable encryption with the 3rd party provider to comply with policy.
present which are not supported for encryption.
upport device encryption with the installed 3rd party provider.
requisites for the device lock feature are not configured.
encryption beacuse a license has not been activated.
encryption.
Party drive encryption plugin.
party drive encryption is too large.
e sync engine.
un into an issue.
y again later.
y again later.
lder under the sync root.
rs of the call or the state of some object was incorrect._x000D_Enable the D3D debug layer in order to see details via debug messages.
s there is no adapter with the specified ordinal.
on this system.
RemovedReason to determine the appropriate action.
use of an invalid command passed by the calling application.
use some other application submitted invalid commands._x000D_The calling application should re-create the device and continue.
d the call was neither executed nor scheduled.
esentation statistics. Any previous statistics should be_x000D_considered invalid.
output was already in use.
ecified operation. The driver's state is probably suspect_x000D_and the application should not continue.
cannot be used by this Direct3D device at this time.
me available later.
ion disconnect or network disconnect._x000D_The application should call IDXGIFactory1::IsCurrent to find out when the remote device be
e the remote computer ran out of memory.
he call may succeed if attempted later.
ows session ended or was disconnected._x000D_This happens when a remote user disconnects or when "switch user" is used locally.
was restricted has been disconnected or changed.
. This is typically caused by an older driver_x000D_or by the application using a swapchain that is incompatible with content protection.
have the required access privileges._x000D_This is most commonly caused by writing to a shared resource with read-only access.
e that is already associated with some other resource.
K component that is missing or mismatched.
view objects per Direct3D device._x000D_The limit is 2^20 for feature levels up to 11.1.
ed context did not use D3D11_MAP_WRITE_DISCARD.
gnored by the compositor. This is to avoid returning S_OK when an error has occurred but still unwind the stack in the correct location.
The caller needs to recreate rerender the entire frame and reattempt present._x000D_There are two known case for this: 1) D3D Driver Int
date was outstanding.
expected to occur but is safe to recover from.
ork location drive or other storage location does not exist or is unavailable.
sharing violation or similar error.
The caller needs to recreate rerender the entire frame and reattempt present.
rer interface after the corresponding DrawText or DrawTextLayout call has returned. The IDWriteTextRenderer instance will be invalid.
ture size at the Direct3D device's current feature level.
ONS_CANNOT_DRAW option.
ferences to the target bitmap.
y bound as a target.
or is a bitmap that does not have the D2D1_BITMAP_OPTIONS_TARGET flag set.
e requested action.
ng settings.
tered effect.
package target types (representing printer formats) are supported by Direct2D print control.
k path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path contact your networ
he network. If joining a domain go to System in Control Panel to change the computer name and try again. If joining a workgroup choose an
as exceeded.
this time because there are already as many connections as the computer can accept.
eration other than raw disk I/O.
nning of the file.
t substituted.
tuted drive.
or dynamic-link module.
ws you're running. Check your computer's system information and then contact the software publisher.
rst add the web site to your trusted sites list browse to the web site and select the option to login automatically.
ins a virus or potentially unwanted software.
cannot be opened. Due to the nature of this virus or potentially unwanted software the file has been removed from this location.
equest was completed.
m is corrupt.
tended Attribute (EA) in the same operation.
e device's granularity/alignment.
ciated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.
nd operation.
er set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFF
set installed on the system.
on is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.
on the volume but it is out of the scope of the handle used for the operation.
not written correctly. The stack pointer has been left in an inconsistent state._x000D_The entrypoint should be declared as WINAPI or STD
not written correctly. The stack pointer has been left in an inconsistent state._x000D_The callback entrypoint should be declared as WINA
maximum size allowed for the system part of the registry. Additional storage requests will be ignored.
callback is active.
user account._x000D_Please choose a longer password.
passwords too frequently._x000D_This is done to prevent users from changing back to a familiar but potentially discovered password._x000
have used in the past._x000D_The policy of your user account does not allow this. Please select a password that you have not previously u
od for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows please
s relocated in memory. The application will not run properly._x000D_The relocation occurred because the DLL %hs occupied an address ra
alize because the window station is shutting down.
equired by client.
ort standby mode. Updating this driver may allow the system to go to standby mode.
w on virtual memory. Windows is increasing the size of your virtual memory paging file._x000D_During this process memory requests for s
rly signed._x000D_The file has been replaced with the signed file._x000D_The system has been shut down.
ng the device configuration._x000D_This may be caused by a failure of your hardware or by a poor connection.
st one mount point which resolves to a volume to which the specified device object is not attached.
or is not attached to the volume specified by the file name.
eventlog for additional information.
will not be used._x000D_Please contact your system vendor for system BIOS update.
s awakened by an interrupt.
atically closed as a result of the requested operation.
st (ACL) contained more information than was expected.
ready exists for the registry sub-tree but that a transaction commit was previously aborted._x000D_The commit has NOT been completed b
dentifier (GUID) to a Windows security ID (SID) no administratively-defined GUID prefix was found._x000D_A substitute prefix was used wh
%hs_x000D_was corrupted and it has been recovered. Some data might have been lost.
module %hs. This may be insecure. An alternative %hs is available. Should the application use the secure module %hs?
hs. This is secure but may be incompatible with previous releases of the operating system. An alternative %hs is available. Should the applic
e pending state.
was changed to 'No Access' and the page was unlocked from memory and from the process.
eady exists for the registry sub-tree but that a transaction commit was previously aborted._x000D_The commit has now been completed.
d due to closing the handle which made the notify change request.
s made to connect to the remote server %hs on the primary transport but the connection failed._x000D_The computer WAS able to conne
he name of the file resulted in a symbolic link.
ements have changed.
pace and no further translations should be performed.
dy for hibernation.
ted an FsFilter operation.
ld enter %4.
l the data for the file %hs; the data has been lost._x000D_This error may be caused by network connectivity issues. Please try to save this fi
l the data for the file %hs; the data has been lost._x000D_This error was returned by the server on which the file exists. Please try to save t
l the data for the file %hs; the data has been lost._x000D_This error may be caused if the device has been removed or the media is write-p
ng corruption records in them. The volume contains detected corruptions and must be scanned.
no longer contains real corruptions.
because no more new names could be created in the recovery directory. Files must be moved from the recovery directory.
ted with a different handle.
k of a lower level may be available.
cause an oplock to be broken. The caller has requested that existing oplocks not be broken.
osed. The oplock is now broken.
rent address from the one specified in the image file but fixups will still be automatically performed on the image.
ompleted because the file has not been opened for data access.
_Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
pened file is no longer valid.
subkeys or values.
n is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
rvices are dependent on.
timely fashion.
e display name.
unt specified for other services running in the same process.
nager._x000D_Therefore the service control manager cannot take action if this service's process terminates unexpectedly.
as in progress.
(IRQ) with other devices. At least one other device that uses that IRQ was already opened.
erial port._x000D_(The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
expired._x000D_(The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
en after retries.
proper alignment.
nother application or driver.
e system supports.
er network resource.
r the network provider is not currently available. Please try retyping the path or contact your network administrator.
me user using more than one user name are not allowed. Disconnect all previous connections to the server or shared resource and try again
er but there are already too many sessions established to that server.
omputer on the network.
it on the number of concurrent connections for this account has been reached.
he KDC certificate during smartcard logon. There is more information in the system event log.
to utilize the smartcard subsystem.
authentication request. Please try again later.
orce option.
application. This overrun could potentially allow a malicious user to gain control of this application.
on can operate on.
se the object is in the process of being deleted.
elay-loaded .dll failed.
ute 16-bit applications. Check your permissions with your system administrator.
process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with
bel of an object.
as returned.
er password. The LAN Manager password returned is a NULL string.
gon request.
een terminated.
pecified group or the specified group cannot be deleted because it contains a member.
oup account.
on account being disabled deleted or unable to logon.
rent password is incorrect.
w password contains values that are not allowed in passwords.
w password does not meet the length complexity or history requirements of the domain.
or example: blank passwords aren't allowed sign-in times are limited or a policy restriction has been enforced.
n right now.
ACE) could not be built.
o associated security.
controller either because the machine is unavailable or access has been denied.
y (LSA) server was in the wrong state to perform the security operation.
er of the domain.
quested operation.
of connections. No more connections can be made to the service at this time because there are already as many connections as the servic
mbolic links.
ompartment.
e remote host.
service. A reboot might be required.
d process is not a GUI process.
occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
r support personnel.
hat the source exists and that you can access it.
nstaller service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
port personnel.
up space on the drive or verify that you have write permission on the Temp folder.
e. Contact your product vendor.
ate package exists and that you can access it or contact the application vendor to verify that this is a valid Windows Installer update packag
tion vendor to verify that this is a valid Windows Installer update package.
taller service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
of this version cannot continue. To configure or remove the existing version of this product use Add/Remove Programs on the Control Pan
r SDK for detailed command line help.
re server software during a Terminal services remote session. If you want to install or configure software on the server contact your networ
will be restarted so the changes can take effect.
ice because the program to be upgraded may be missing or the upgrade may update a different version of the program. Verify that the pro
triction policy.
ote Desktop Connection.
rtised products. At least one feature of the product must be installed before applying the update.
Please try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state.
voked and the process will be terminated immediately.
sion of Windows.
ode generation.
unique identifier (UUID).
s has been exhausted.
an 512 bytes.
uring a remote procedure call.
logged on to.
our computer that blocks NT 4.0 drivers.
ation firewall. The specified account is not allowed to authenticate to the computer.
cy set on your machine.
ed memory segment.
ged on as STANDALONE.
er of the domain.
s. Check the minimum password length password complexity and password history requirements.
ity database.
nger service.
s been truncated to 64K.
oled resource.
artially saved.
ause the user's logon hours are no longer valid.
n controller's clock.
maximum number.
om a domain.
machine accounts in OUs.
the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resolve DNS names in the target d
ve access to the specified path location and permissions to modify its contents. Running as an elevated administrator may be required.
er computer.
er of its domain._x000D_However the computer %1 is currently claiming to be the primary domain controller_x000D_of the domain.
serial number.
gment for network control blocks (NCBs). The error code is the data.
_segment for network control blocks (NCBs). The error code is the data.
e from NetServiceControl is the data.
000D_path %1. The system error code is the data.
NCB is the data.
e data shown is in this format:_x000D_DWORD approx CS:IP of call to ioctl or fsctl_x000D_WORD error code_x000D_WORD ioctl or fsct
error code is the data.
00D_file %1. The system error code is the data.
e is the data.
he SMB is the data.
could not be started.
00D_overflow.
0D_than net buffers are sized so that too much memory is needed.
in Controller %1 for the domain %2_x000D_failed because %1 does not support signing or sealing the Netlogon_x000D_session._x000D__
ANMAN.INI file.
TE]_x000D_AT time [/EVERY:date | /NEXT:date] command_x000D__x000D_The AT command schedules a program command to run at a_x
g the database.
completed.
y been carried out.
MI data provider.
data provider.
been registered.
this parameter.
east one drive in the library reports it can support this media type.
enabled drives are present which can be used.
ord or_x000D_press ENTER if it is for domain %1:
attempted.
odified or deleted.
e requested operation.
until the next time the resource is brought online.
source because it does not belong to a shared storage class.
his may be due to version inconsistencies or due to the absence of the resource DLL on this node.
DLL. This may be due to a bad (or changed) name supplied to the resource DLL.
roup is not in the preferred list for the group. To change the owner node for the group move the group.
ce number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was chang
rformed while the resource is in its current state. This may happen if the resource is in a pending state.
global updates.
s_x000D_with Windows prior to Windows 2000 will not be able to use_x000D_this account. Do you want to continue this operation? %1:
to overwrite the remembered connection? %3:
ich_x000D_caused the error will be ignored. %1:
ller for_x000D_the %2 domain. One of the servers should be removed from the_x000D_domain because the servers have different securit
000D_controller for the %3 domain. One of the servers should be_x000D_demoted or removed from the domain.
0D_the trust relationship established by the %3 domain. However the_x000D_computer lost the correct security identifier (SID)_x000D_wh
was:_x000D_%1._x000D_%2_x000D_A full dump was not saved.
was:_x000D_%1._x000D_%2_x000D_A dump was saved in: %3.
an indirect_x000D_trust.) However %1 and %2 have the same machine security identifier_x000D_(SID). NT should be re-installed on eithe
an indirect_x000D_trust.) However %2 is not a valid name for a trusted domain._x000D_The name of the trusted domain should be change
ty_x000D_database.
0D_local or network security database.
000D_structures successfully. The service was terminated. The following_x000D_error occurred: _x000D_%1
e_x000D_following error occurred: _x000D_%1
00D_service was terminated. The following error occurred: _x000D_%1
%1 due_x000D_to the following error: _x000D_%2
00D_service controller. The service was terminated. The following_x000D_error occurred: _x000D_%1
%1_x000D_database changes is inconsistent. The Netlogon service is resetting_x000D_the change log.
llowing_x000D_error occurred: _x000D_%2
g reason: _x000D_%2
x000D_file permissions. These accounts are the RPLUSER local group_x000D_and the user accounts for the individual RPL workstations.
be_x000D_missing or corrupted. Service will attempt restoring the database_x000D_from the backup.
_x000D_will not start.
another node.
performing another operation.
IPv6 address is required and it must match a cluster network. Compatibility addresses are not permitted.
was attempted.
in the cluster. The number of bytes transmitted was less than required.
a it represents.
on was attempted while a transaction was already in progress.
mmit a cluster database transaction while no transaction was in progress.
ith one or more property values associated with its dependent resource(s).
he cluster._x000D_Those resources must be moved to available storage in order for operation to succeed.
_Use shared volume APIs to perform desired operation.
re trying this operation again.
re incompatible.
hanged while the cluster is in disk-only quorum mode or because changing the node weight would violate the minimum cluster quorum req
sks must have at least one partition that is formatted with NTFS or REFS.
mplete this action.
s currently loaded.
overy certificate.
er key buffer than the one on the destination file.
stem account to function properly. Individual tasks may be configured to run in other accounts.
e archive tail.
m a log container.
a log container.
ot in a valid format.
ot a valid handle to a transaction object.
it was not found.
ecause it was not found.
t was not found.
because it was not found.
ts associated TransactionManager is not online. The TransactionManager must be brought fully Online by calling RecoverTransactionMana
bjects contained in its logfile in the Ob namespace. Therefore the TransactionManager was unable to recover.
ect could not be completed because the Transaction object specified for the enlistment is a subordinate branch of the Transaction. Only th
ager has been closed the handle is no longer valid.
or enlistment because the enlistment was not created with the corresponding completion response in the NotificationMask.
ecord that would be logged was too long. This can occur because of two conditions: either there are too many Enlistments on this Transacti
saction because it blocked forward progress.
tch the one recorded in the TransactionManager's log file.
nal resource manager cannot be frozen in its current state. Please try again.
mentMask because the transaction has already completed the PrePrepare phase. In order to ensure correctness the ResourceManager mu
sible that some portion of the transaction tree did not commit successfully due to heuristics. Therefore it is possible that some data modifi
by another transaction.
not started or was shut down due to an error.
ger's log failed. The failure status has been recorded in the event log.
nder a transaction is not supported.
t be superseded.
andler has not been initialized.
er to enlist but the transaction was set to disallow it.
and may be opened for execute only by a transacted reader.
ransactions had not previously been frozen.
only valid on a volume mounted as a snapshot.
ansaction. This is not permitted.
nce been repaired. Data loss may have occurred.
action is active on the file.
the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument.
s a result of a transaction ending. There is no valid data.
ansacted work due to a transient condition such as low resources.
outstanding that could not be aborted. The transactional resource manger has been shut down.
n. It may have been opened in a transactional resource manager that was subsequently forced to restart. Please close the handle and ope
esource manager is not enlisted in the transaction.
system path.
ote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.
o mode is not supported by the current client.
graphics mode is not supported.
act your administrator.
console. This is most often the result of a driver or system DLL requiring direct console access.
This may be because the session is disconnected or does not currently have a user logged on.
ted. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a un
ted. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please contact your system
connections are in use right now. Try connecting later or contact your system administrator.
logon request is denied.
urred in the Windows video subsystem. Try connecting again later or contact the server administrator for assistance.
t permitted.
nt on the object.
rvice. The directory service is therefore unable to issue referrals to objects outside this forest.
g low on memory.
available or does not support the operation. Some part of the directory is currently not available.
h between the servers involved.
hip of new floating single-master operation roles.
mation and is unable to determine the ownership of floating single-master operation roles.
or more floating single-master operation roles to other servers.
already exists.
d instance type.
d to another server.
e directory service.
ect is missing.
to see name.
tput format.
ain was found.
ng at the client without going out to the wire.
was available.
ASCII characters.
a mandatory attribute from an existing class or adding an optional attribute to the special class Top that is not a backlink attribute (directly
t the schema FSMO Role Owner.
ntainer. You can only create attribute-schema and class-schema objects under the schema container.
e on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not hav
te in the SCHEMA section of the file schema.ini in the system32 directory.
s security-enabled.
security-enabled.
a member.
sabled group.
on a class-schema object.
lowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers)
y was found.
ward links can only have syntax 2.5.5.1 2.5.5.7 and 2.5.5.14 and backlinks can only have syntax 2.5.5.1
acy or better.
following error: %1._x000D_Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for deta
ema incompatibility.
vious schema incompatibility.
e source or the destination has not yet received information regarding a recent cross-domain move operation.
st domain controllers that still host this domain.
talog server.
e same domain.
of security reasons.
e too many modifications being processed currently.
aming contexts.
use the provided hostname is not in the necessary format.
ceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have t
ring tree delete operations. The tree delete may have been partially performed.
or: %1._x000D_Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system furthe
following error: %1._x000D_Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the
urrent AD DS forest functional level or AD LDS Configuration Set functional level. You must upgrade to a new version of the operating system
with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a doma
longer supports the current AD DS Forest functional level or AD LDS Configuration Set functional level. You must raise the AD DS Forest fun
longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain c
ncompatible with the functional level of the domain or forest.
to the requested value because there exist one or more domain controllers in the domain (or forest) that are at a lower incompatible functi
alue since one or more domains are still in mixed domain mode. All domains in the forest must be in native mode for you to raise the fores
s to be recreated.
a remote server. Make sure at least one server is running for the partition in question.
r partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context.
h to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attr
because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress).
hange in the server extensions information.
main Naming Master FSMO. The operation's error is in the extended data.
h to mutually authenticate the target server because the server's domain has been deleted from the forest.
e retrieved.
ct may not exist because it may have been deleted and already garbage collected.
the requested group type.
not allowed.
ups is not allowed.
ectory partition has not replicated successfully with at least one replication partner.
ontainer cannot already be a special container.
because a domain rename operation is in progress.
ested partition name. The partition hierarchy must be created in a top down method.
the time since the last replication with this server has exceeded the tombstone lifetime.
e system container.
e client is not processing the results of its requests fast enough. No more requests will be processed until the client catches up. If the clien
m was too busy to execute the request within the schedule window. The replication queue is overloaded. Consider reducing the number o
policy is available on the hub domain controller. Please retry at a later time to account for replication latencies.
e specified account.
o the DNS server. Zone signing will not be operational until this error is resolved.
ata protection. Zone signing will not be operational until this error is resolved.
will not be operational until this error is resolved.
ay not be operational until this error is resolved.
ersion. Zone signing will not be operational until this error is resolved.
r listed as the current key master for this zone is down or misconfigured. Resolve the problem on the current key master for this zone or us
nt user-provided salt or use a randomly generated salt and attempt to sign the zone again.
Choose a different algorithm or use NSEC3.
namespace has been delegated to another server.
rver IP addresses.
ntly being signed. Please try again later.
nal message buffer or some other network limit or the buffer used to receive a datagram into was smaller than the datagram itself.
ot support the semantics of the socket type requested.
ed in a getsockopt or setsockopt call.
m or no implementation for it exists.
address family.
ct referenced.
r no implementation for it exists.
socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.
socket had already been shut down in that direction with a previous shutdown call.
not properly respond after a period of time or established connection failed because connected host has failed to respond.
vely refused it.
umber of applications that may use it simultaneously.
nd means that the local server did not receive a response from an authoritative server.
was found.
uffer in general.
FLOWDESCRIPTOR.
he QOS provider-specific buffer.
OS structure.
der specific buffer.
rk Security Administrator about installing a valid certificate in the appropriate Certificate Store.
es not have a private key. IPsec certificates require a private key. Contact your Network Security administrator about replacing with a certifi
R_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal
SEC_IKE service (QueryCredentialsAttributes).
The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters.
mmon cause for this is if the IKE negotiation took too long to complete. If the problem persists reduce the load on the faulting machine.
a real failure.
below the Windows 2000 configured minimum value. Please fix the policy on the peer machine.
acket characteristics.
queue because the maximum number of queues allowed by policy has been reached.
figuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
mat information.
rrent encoding.
an XML document.
nd attribute value.
of execution is corrupt.
as become corrupt.
tly activated one.
urrent thread of execution.
comma more than two unnamed attributes missing attribute name or missing attribute value.
med. Either a dollar sign ($) was followed by something other than a left parenthesis or another dollar sign or an substitution's right parenth
eing cleared or rolling over after the query result was created. Users should handle this code by releasing the query result object and reissu
ation if it itself evaluates to a node set and is not already part of some other change of scope operation.
esent an element set.
ttributes nodes or variables and right hand side arguments must be constants.
of a predicate an algebraic expression against which to test each node in the node set identified by the preceeding node set can be evalua
d direct channel. The channel must first be disabled before performing the requested operation.
lid type is outside of valid range can't be updated or is not supported by this type of channel.
alid type is outside of valid range can't be updated or is not supported by this type of publisher.
le. This usually occurs when the publisher is in the process of being uninstalled or upgraded.
used to forward events to. The log must first be enabled before the subscription can be activated.
y of the subscription can't contain target log of the subscription.
ential store.
to pass validation.
d version or missing required item.
have a CoreWindow.
ot valid anymore.
comply with the ACCESS.bus 3.0 DDC/CI 1.1 or MCCS 2 Revision 1 specification.
d version value.
aims to support.
match the MCCS version the monitor reports when the VCP Version (0xDF) VCP code is used.
upport the MCCS 1.0 specification MCCS 2.0 specification or the MCCS 2.0 Revision 1 specification.
Plasma and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Re
mperature that the current monitor did not support. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 spec
ple indistinguishable devices potentially matching the identification criteria.
service_x000D_must not be higher than the run level of its dependent services.
lly since_x000D_one or more services will not stop or restart within the specified timeout.
the package was blocked. Check the AppXDeployment-Server event log for details.
on to fix the problem.
be read. Please contact your system administrator with the contents of your AppModel Runtime event log.
d. Please contact your system administrator with the contents of your AppModel Runtime event log.
plication or product.
ending verification.
ecognizer because no training data found
en disabled.
ordinated transaction and some number of enlisted resources were aborted outright because they could not support abort-retaining sema
ther chance to look if any other sinks make further changes.
nges were made to one or more resources during this call.
eed but if other changes are made following this return by other event sinks then this sink wants another chance to look
was non-retaining.
f the transaction.
authenticate.
t generator earlier.
me reason it was replaced with empty one.
use sink to generate corrupted content.
while timer is stopped. Timer is not going to be dispatched until clock is running.
ng the updates.
quest to disconnect the operation came while a callback was executing.
hould be updated.
omplete the Desktop Duplication Present() call the Present() call needs to be made again
dataset. Partial data populated up to the size of the buffer. Caller needs to provide buffer of size as specified in the partially populated buffe
at the same polling level.
call control.
s deployment type will be always detected as long as other deployment types are still installed
ministrator to get this computer added to the Windows Authorization Access Group.
not equal to zero.
wall is present and it doesn't have an exception for the MSDTC process the two machines cannot find each other by their NetBIOS names o
l is present and it doesn't have an exception for the MSDTC process the two machines cannot find each other by their NetBIOS names or th
cannot be made while inside of a transaction scope.
etwork path contact your network administrator.
If joining a workgroup choose another workgroup name.
oved from this location.
his case information is lost however the filter correctly handles the exception.
his case information is lost however the filter correctly handles the exception.
his case information is lost however the filter correctly handles the exception.
D that could be stored by the file system._x000D_This causes the protection attempt to fail which may cause a file creation attempt to fail.
or one threads.
mapping routines.
ght be malicious software from an unknown source.
mputer hardware or network connection. Please try to save this file elsewhere.
large stream.
uld be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the applica
oint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However the service process may
tially discovered password._x000D_If you feel your password has been compromised then please contact your administrator immediately t
d that you have not previously used.
is installation of Windows please upgrade this installation using a licensed distribution of this product.
DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
s process memory requests for some applications may be denied. For more information see Help.
mmit has NOT been completed but has not been rolled back either (so it may still be committed if desired).
_A substitute prefix was used which will not compromise system security. However this may provide a more restrictive access than intende
module %hs?
%hs is available. Should the application use the secure module %hs?
debugger can load unload or track symbols and breakpoints within these 16-bit segments.
because the file system encountered a failure on a member of the fault-tolerant volume but was unable to reassign the failing area of the d
ause the file system encountered a failure on a member of the fault-tolerant volume but was not able to reassign the failing area of the dev
covery directory.
be recovered because the alternate copy or log was absent or corrupted.
es unexpectedly.
or shared resource and try again.
oexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured the hos
the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
chine to a previous good state.
ejoin the domain.
solve DNS names in the target domain. For information about network troubleshooting see Windows Help.
000D_Any updates made to the database after this time are lost.
de to the database after this time are lost.
._x000D__x000D_THE SYSTEM IS NOT SECURE.
ler_x000D_of the domain.
ode_x000D_WORD ioctl or fsctl number
Any updates made to the database after this time are lost.
the database made after this time are lost.
._x000D__x000D_THE SYSTEM IS NOT SECURE.
s inability to authenticate might be caused by another computer on the_x000D_same network using the same name or the password for t
ogon_x000D_session._x000D__x000D_Either upgrade the Domain controller or set the RequireSignOrSeal_x000D_registry entry on this m
orking on the error log.
click OK._x000D__x000D_2. Click %1 click the Action menu click Clear All Events and then click No._x000D__x000D__x000D_If this dialog r
curity identifier (SID)_x000D_when the domain was reconfigured. Reestablish the trust_x000D_relationship.
o authentication problems. Make sure that this_x000D_computer is connected to the network. If the problem persists_x000D_please conta
database account.
%4_x000D_needed to set up the session by this computer %3._x000D__x000D__x000D__x000D_ADDITIONAL DATA_x000D__x000D_If th
error occurred: _x000D_%3
_x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_If this is the first occurrence of this event for the specified computer_x0
erver can be a LAN Manager server with an account in the_x000D_SERVERS global group. It cannot be both.
m the domain.
e individual RPL workstations.
n %3._x000D_However %2 tried to connect as either a DC in a trusted domain_x000D_a member workstation in domain %3 or as a server i
pplication event log when it is finished.
d in NT domains.
000D__x000D__x000D__x000D_DNS server IP address: %1_x000D__x000D_Returned Response Code (RCODE): %2_x000D__x000D_Retur
ned Response Code (RCODE): %4_x000D__x000D_Returned Status Code: %5_x000D__x000D__x000D__x000D_For computers and users to
Response Code (RCODE): %4_x000D__x000D_Returned Status Code: %5_x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D
x/yy where xx.xx.xx.xx is a valid IP subnet number_x000D_and yy is the number of bits in the subnet mask._x000D__x000D_Correct the na
x000D_server as a domain controller (if the specified domain is an Active Directory_x000D_domain) or as an LDAP server (if the specified d
es in the Windows 2000 or newer_x000D_domain that this computer is a member of._x000D_The following error occurred:_x000D_%2
_in this case for authentication purposes. This computer needs to rejoin_x000D_the domain._x000D_The following error occurred:_x000D
omain NC '%3' based on configured_x000D_Directory Server replication costs.
main Controllers for domain '%3'._x000D_Domain Controllers in site '%1' have been automatically_x000D_selected to cover site '%2' for d
D_domain '%2' since this site has been manually configured in the registry.
lobal Catalog servers for forest '%3'._x000D_Global Catalog servers in site '%1' have been automatically_x000D_selected to cover site '%2'
orest '%2' since this site has been manually configured in the registry.
DAP servers for non-domain NC '%3'._x000D_LDAP servers in site '%1' have been automatically_x000D_selected to cover site '%2' for non-
n-domain NC '%2' since this site has been manually configured in the registry.
oller_x000D_'%1' had more than one account with the name '%2' corresponding to this computer._x000D_Not having SPNs registered may
ount_x000D_name '%2' could not be mapped to the computer object on Domain Controller '%1'._x000D_Not having SPNs registered may r
generally_x000D_recommended that the IP address of the Domain Controller (accessible to machines in_x000D_its domain) maps to the S
s domain controller to use dynamic DNS updates or manually add the DNS_x000D_records from the file '%SystemRoot%\System32\Config
xisting sites in the enterprise. Those clients therefore have_x000D_undefined sites and may connect to any Domain Controller including_x0
x000D_took too long._x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_Manually delete the DNS records listed in
the_x000D_following error occurred when Netlogon attempted to register this port with the RPC_x000D_endpoint mapper service: _x000D
D_has a partial subnet-site mapping if its IPv4 address is mapped to a site but_x000D_its global IPv6 address is not mapped to a site or vice
S server IP address: %4_x000D__x000D_Returned Response Code (RCODE): %5_x000D__x000D_Returned Status Code: %6_x000D__x000D
DNS server IP address: %4_x000D__x000D_Returned Response Code (RCODE): %5_x000D__x000D_Returned Status Code: %6_x000D__x00
For computers and users to locate this domain controller this record must be_x000D_registered in DNS. If the problem persists please cont
_To prevent remote computers from connecting unnecessarily to this domain controller_x000D_an administrator with sufficient privileges
x000D__x000D_For other computers and member servers to locate this domain controller the appropriate_x000D_records must be registe
4. This is the first failure. If the problem continues _x000D_consolidated events will be logged about every %5 minutes._x000D_Please see
n domain %4._x000D_Please see http://support.microsoft.com/kb/2654097 for more information.
arning. If the problem persists a recurring event will be logged _x000D_every %6 minutes._x000D_Please see http://support.microsoft.com
ort.microsoft.com/kb/2654097 for more information.
anch of the Transaction. Only the root of the Transaction can be enlisted on as a superior.
NotificationMask.
any Enlistments on this Transaction or the combined RecoveryInformation being logged on behalf of those Enlistments is too long.
ctness the ResourceManager must switch to a write-through mode and cease caching data within this transaction. Enlisting for only subse
is possible that some data modified in the transaction may not have committed resulting in transactional inconsistency. If possible check t
olled back to savepoint.
Please close the handle and open a new one.
nsure that the domain naming master role is held by a server that is configured as a global catalog server and that the server is up to date w
vices Restore Mode check the event log for more detailed information.
not a backlink attribute (directly or through inheritance for example by adding or deleting an auxiliary class) is not allowed.
me that is in progress).
he client catches up. If the client does not catch up then it will be disconnected.
Consider reducing the number of partners or decreasing the scheduled replication frequency.
account. If this is an online provider please use the provider's online site.
nt key master for this zone or use another DNS server to seize the key master role.
iled to respond.
tor about replacing with a certificate that has a private key.
fy the filters.
d a second partition for use as the operating system drive and then encrypt the operating system drive.
up version of the recovery key must be used to recover access to the drive.
PS-compliant mode BitLocker recovery options can be either a recovery key stored on a USB drive or recovery through a data recovery age
ker recovery options can be either a recovery key stored on a USB drive or recovery through a data recovery agent. Check your Group Polic
omputer on an active USB port restart the computer and then try again. If the problem persists contact the computer manufacturer for BIO
drives when user recovery options are disabled. If you want BitLocker-protected fixed data drives to be automatically unlocked after key va
data drives when user recovery option are disabled. If you want BitLocker-protected removable data drives to be automatically unlocked a
ate have an EKU attribute but if one is configured it must be set to an object identifier (OID) that matches the OID configured for BitLocker.
lf-signed. Current Group Policy settings do not permit the use of self-signed certificates. Obtain a new certificate from your certification aut
e of a USB startup key cannot be required. Please have your system administrator resolve these policy conflicts before attempting to enable
write-protected.
overy information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Pl
nformation to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please ha
very information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Plea
KU attribute but if one is configured it must be set to either Key Encipherment or Key Agreement.
dentifiers. To specify organizational identifiers for this drive upgrade the drive encryption to the latest version using the "manage-bde -upg
events BitLocker from using any other key derivation function for encryption. You have to use a FIPS compliant smart card in FIPS restricted
s common punctuation separators and the following symbols: # $ & @ ^ _ ~ .
system administrator resolve this invalid configuration before attempting to enable BitLocker.
ng the user determining the file association information or when attempting to launch the program. This program execution will not be ret
n case for this: 1) D3D Driver Internal error 2) D3D E_FAIL 2a) Unknown root cause b) When resizing too quickly for DWM and D3D stay in s
erer instance will be invalid.
etwork path contact your network administrator.
If joining a workgroup choose another workgroup name.
oved from this location.
his case information is lost however the filter correctly handles the exception.
his case information is lost however the filter correctly handles the exception.
his case information is lost however the filter correctly handles the exception.
D that could be stored by the file system._x000D_This causes the protection attempt to fail which may cause a file creation attempt to fail.
or one threads.
mapping routines.
mputer hardware or network connection. Please try to save this file elsewhere.
large stream.
uld be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the applica
oint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However the service process may
tially discovered password._x000D_If you feel your password has been compromised then please contact your administrator immediately t
d that you have not previously used.
is installation of Windows please upgrade this installation using a licensed distribution of this product.
DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
s process memory requests for some applications may be denied. For more information see Help.
mmit has NOT been completed but has not been rolled back either (so it may still be committed if desired).
_A substitute prefix was used which will not compromise system security. However this may provide a more restrictive access than intende
module %hs?
%hs is available. Should the application use the secure module %hs?
debugger can load unload or track symbols and breakpoints within these 16-bit segments.
because the file system encountered a failure on a member of the fault-tolerant volume but was unable to reassign the failing area of the d
ause the file system encountered a failure on a member of the fault-tolerant volume but was not able to reassign the failing area of the dev
ocessor in the system. Should problems occur with this system contact the CPU manufacturer to see if this mix of processors is supported.
onsole (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the ac
many connections as the service can accept.
taller service.
the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
solve DNS names in the target domain. For information about network troubleshooting see Windows Help.
000D_Any updates made to the database after this time are lost.
de to the database after this time are lost.
._x000D__x000D_THE SYSTEM IS NOT SECURE.
ler_x000D_of the domain.
Any updates made to the database after this time are lost.
the database made after this time are lost.
._x000D__x000D_THE SYSTEM IS NOT SECURE.
s inability to authenticate might be caused by another computer on the_x000D_same network using the same name or the password for t
ogon_x000D_session._x000D__x000D_Either upgrade the Domain controller or set the RequireSignOrSeal_x000D_registry entry on this m
curity identifier (SID)_x000D_when the domain was reconfigured. Reestablish the trust_x000D_relationship.
T should be re-installed on either %1 or %2.
rusted domain should be changed to a valid name.
o the database.
o authentication problems. Make sure that this_x000D_computer is connected to the network. If the problem persists_x000D_please conta
database account.
%4_x000D_needed to set up the session by this computer %3._x000D__x000D__x000D__x000D_ADDITIONAL DATA_x000D__x000D_If th
error occurred: _x000D_%3
_x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_If this is the first occurrence of this event for the specified computer_x0
erver can be a LAN Manager server with an account in the_x000D_SERVERS global group. It cannot be both.
m the domain.
n %3._x000D_However %2 tried to connect as either a DC in a trusted domain_x000D_a member workstation in domain %3 or as a server i
pplication event log when it is finished.
d in NT domains.
000D__x000D__x000D__x000D_DNS server IP address: %1_x000D__x000D_Returned Response Code (RCODE): %2_x000D__x000D_Retur
ned Response Code (RCODE): %4_x000D__x000D_Returned Status Code: %5_x000D__x000D__x000D__x000D_For computers and users to
Response Code (RCODE): %4_x000D__x000D_Returned Status Code: %5_x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D
x/yy where xx.xx.xx.xx is a valid IP subnet number_x000D_and yy is the number of bits in the subnet mask._x000D__x000D_Correct the na
x000D_server as a domain controller (if the specified domain is an Active Directory_x000D_domain) or as an LDAP server (if the specified d
to %1 has been cancelled.
omain '%3' based on configured_x000D_Directory Server replication costs.
es in the Windows 2000 or newer_x000D_domain that this computer is a member of._x000D_The following error occurred:_x000D_%2
_in this case for authentication purposes. This computer needs to rejoin_x000D_the domain._x000D_The following error occurred:_x000D
omain NC '%3' based on configured_x000D_Directory Server replication costs.
main Controllers for domain '%3'._x000D_Domain Controllers in site '%1' have been automatically_x000D_selected to cover site '%2' for d
D_domain '%2' since this site has been manually configured in the registry.
lobal Catalog servers for forest '%3'._x000D_Global Catalog servers in site '%1' have been automatically_x000D_selected to cover site '%2'
orest '%2' since this site has been manually configured in the registry.
DAP servers for non-domain NC '%3'._x000D_LDAP servers in site '%1' have been automatically_x000D_selected to cover site '%2' for non-
n-domain NC '%2' since this site has been manually configured in the registry.
oller_x000D_'%1' had more than one account with the name '%2' corresponding to this computer._x000D_Not having SPNs registered may
ount_x000D_name '%2' could not be mapped to the computer object on Domain Controller '%1'._x000D_Not having SPNs registered may r
generally_x000D_recommended that the IP address of the Domain Controller (accessible to machines in_x000D_its domain) maps to the S
s domain controller to use dynamic DNS updates or manually add the DNS_x000D_records from the file '%SystemRoot%\System32\Config
xisting sites in the enterprise. Those clients therefore have_x000D_undefined sites and may connect to any Domain Controller including_x0
x000D_took too long._x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_Manually delete the DNS records listed in
the_x000D_following error occurred when Netlogon attempted to register this port with the RPC_x000D_endpoint mapper service: _x000D
D_has a partial subnet-site mapping if its IPv4 address is mapped to a site but_x000D_its global IPv6 address is not mapped to a site or vice
S server IP address: %4_x000D__x000D_Returned Response Code (RCODE): %5_x000D__x000D_Returned Status Code: %6_x000D__x000D
DNS server IP address: %4_x000D__x000D_Returned Response Code (RCODE): %5_x000D__x000D_Returned Status Code: %6_x000D__x00
For computers and users to locate this domain controller this record must be_x000D_registered in DNS. If the problem persists please cont
_To prevent remote computers from connecting unnecessarily to this domain controller_x000D_an administrator with sufficient privileges
x000D__x000D_For other computers and member servers to locate this domain controller the appropriate_x000D_records must be registe
4. This is the first failure. If the problem continues _x000D_consolidated events will be logged about every %5 minutes._x000D_Please see
n domain %4._x000D_Please see http://support.microsoft.com/kb/2654097 for more information.
arning. If the problem persists a recurring event will be logged _x000D_every %6 minutes._x000D_Please see http://support.microsoft.com
ort.microsoft.com/kb/2654097 for more information.
anch of the Transaction. Only the root of the Transaction can be enlisted on as a superior.
NotificationMask.
any Enlistments on this Transaction or the combined RecoveryInformation being logged on behalf of those Enlistments is too long.
ctness the ResourceManager must switch to a write-through mode and cease caching data within this transaction. Enlisting for only subse
is possible that some data modified in the transaction may not have committed resulting in transactional inconsistency. If possible check t
nsure that the domain naming master role is held by a server that is configured as a global catalog server and that the server is up to date w
vices Restore Mode check the event log for more detailed information.
not a backlink attribute (directly or through inheritance for example by adding or deleting an auxiliary class) is not allowed.
e the proposed naming context. Please ensure that the parent naming context is properly registered in DNS and at least one replica of this
me that is in progress).
he client catches up. If the client does not catch up then it will be disconnected.
Consider reducing the number of partners or decreasing the scheduled replication frequency.
account. If this is an online provider please use the provider's online site.
nt key master for this zone or use another DNS server to seize the key master role.
iled to respond.
tor about replacing with a certificate that has a private key.
ONAL DATA_x000D__x000D_If this computer is a member of or a Domain Controller in the specified domain the_x000D_aforementioned ac
nt for the specified computer_x000D_and account this may be a transient issue that doesn't require any action_x000D_at this time._x000D
on in domain %3 or as a server in domain %3._x000D_Use the Active Directory Users and Computers tool or Server Manager to remove th
ng error occurred:_x000D_%2
ollowing error occurred:_x000D_%2
_selected to cover site '%2' for domain '%3' based on configured_x000D_Directory Server replication costs.
000D_selected to cover site '%2' for forest '%3' based on configured_x000D_Directory Server replication costs.
lected to cover site '%2' for non-domain NC '%3' based on_x000D_configured Directory Server replication costs.
_Not having SPNs registered may result in authentication failures for this computer._x000D_Contact your domain administrator who may ne
Not having SPNs registered may result in authentication failures for this computer._x000D_Contact your domain administrator. The followin
000D_its domain) maps to the Site which it services. If the above list of IP addresses is_x000D_stable consider moving this server to a site
saction. Enlisting for only subsequent transaction phases may still succeed.
s) is not allowed.
D LDS Instance in this AD DS Forest or AD LDS Configuration Set.
r can become an AD DS Domain Controller or an AD LDS Instance in this Forest or Configuration Set.
S and at least one replica of this naming context is reachable by the Domain Naming master.
ne SID. Please see http://go.microsoft.com/fwlink/?LinkId=168895 for more information.
his program execution will be retried if the retry count has not been exceeded.
rogram execution will not be retried.
t this failure to Microsoft.
r instructions.
the Win32_Tpm WMI method 'Provision'. (The actions that may be required include importing the TPM Owner Authorization value into th
nsions have been installed.
ery through a data recovery agent.
y agent. Check your Group Policy settings configuration.
e computer manufacturer for BIOS upgrade instructions.
omatically unlocked after key validation has occurred please ask your system administrator to resolve the settings conflict before enabling
s to be automatically unlocked after key validation has occurred please ask your system administrator to resolve the settings conflict before
he OID configured for BitLocker.
ficate from your certification authority before attempting to enable BitLocker.
flicts before attempting to enable BitLocker.
y passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
words is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker.
ONAL DATA_x000D__x000D_If this computer is a member of or a Domain Controller in the specified domain the_x000D_aforementioned ac
nt for the specified computer_x000D_and account this may be a transient issue that doesn't require any action_x000D_at this time._x000D
on in domain %3 or as a server in domain %3._x000D_Use the Active Directory Users and Computers tool or Server Manager to remove th
_selected to cover site '%2' for domain '%3' based on configured_x000D_Directory Server replication costs.
000D_selected to cover site '%2' for forest '%3' based on configured_x000D_Directory Server replication costs.
lected to cover site '%2' for non-domain NC '%3' based on_x000D_configured Directory Server replication costs.
_Not having SPNs registered may result in authentication failures for this computer._x000D_Contact your domain administrator who may ne
Not having SPNs registered may result in authentication failures for this computer._x000D_Contact your domain administrator. The followin
000D_its domain) maps to the Site which it services. If the above list of IP addresses is_x000D_stable consider moving this server to a site
s) is not allowed.
D LDS Instance in this AD DS Forest or AD LDS Configuration Set.
r can become an AD DS Domain Controller or an AD LDS Instance in this Forest or Configuration Set.
S and at least one replica of this naming context is reachable by the Domain Naming master.
ne SID. Please see http://go.microsoft.com/fwlink/?LinkId=168895 for more information.
ansaction managers.
saction managers.
gain contact your system_x000D_administrator.
1-31_x000D_for the day of the month._x000D__x000D_You can specify the time in the 24 hour HH:MM format.
NAL INFO_x000D__x000D_If this computer is a domain controller for the specified domain it_x000D_sets up the secure session to the prim
n the_x000D_aforementioned account is a computer account for this computer in the specified domain._x000D_Otherwise the account is
tion_x000D_at this time._x000D__x000D_If this is a Read-Only Domain Controller and '%2' is a legitimate machine_x000D_account for the
or Server Manager to remove the BDC account for %2.
00D__x000D__x000D_Configure the DNS server to allow dynamic DNS updates or manually add the DNS_x000D_records from the file '%Sy
NS._x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_Determine what might have caused this failure resolve the p
the domain controller_x000D_delete the record manually or troubleshoot the failure to dynamically delete the_x000D_record. To learn m
ible causes of failure include:_x000D__x000D__x000D_- TCP/IP properties of the network connections of this computer contain wrong IP a
omain administrator who may need to manually resolve the account name_x000D_collision.
main administrator. The following technical information may be_x000D_useful for the resolution of this failure:_x000D__x000D_DsCrackNa
ider moving this server to a site (or create one if it does not already_x000D_exist) such that the above IP address maps to the selected site
_x000D_is determined by the mapping of its subnet to one of the existing sites._x000D_To move the above clients to one of the sites pleas
e DNS database.
machines from connecting to this domain controller over TCP/IP that may result in_x000D_authentication problems._x000D__x000D__x000
mber computers and servers that rely on_x000D_subnet-site mappings dual-stack IPv4/IPv6 clients must have both IPv4 and global_x000D_
er '%3' this record must be_x000D_registered in DNS._x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_Determin
emote computers from attempting to connect to the domain controller '%3'_x000D_using an invalid record delete the record '%1' manuall
ailure to set up a secure session to determine why the request is failing. If the problem_x000D_persists please contact your domain admini
e a TransactionManager to go offline.
Owner Authorization value into the system calling the Win32_Tpm WMI method for provisioning the TPM and specifying TRUE for either 'Fo
settings conflict before enabling BitLocker.
esolve the settings conflict before enabling BitLocker.
n the_x000D_aforementioned account is a computer account for this computer in the specified domain._x000D_Otherwise the account is
tion_x000D_at this time._x000D__x000D_If this is a Read-Only Domain Controller and '%2' is a legitimate machine_x000D_account for the
or Server Manager to remove the BDC account for %2.
00D__x000D__x000D_Configure the DNS server to allow dynamic DNS updates or manually add the DNS_x000D_records from the file '%Sy
NS._x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_Determine what might have caused this failure resolve the p
the domain controller_x000D_delete the record manually or troubleshoot the failure to dynamically delete the_x000D_record. To learn m
ible causes of failure include:_x000D__x000D__x000D_- TCP/IP properties of the network connections of this computer contain wrong IP a
omain administrator who may need to manually resolve the account name_x000D_collision.
main administrator. The following technical information may be_x000D_useful for the resolution of this failure:_x000D__x000D_DsCrackNa
ider moving this server to a site (or create one if it does not already_x000D_exist) such that the above IP address maps to the selected site
_x000D_is determined by the mapping of its subnet to one of the existing sites._x000D_To move the above clients to one of the sites pleas
e DNS database.
machines from connecting to this domain controller over TCP/IP that may result in_x000D_authentication problems._x000D__x000D__x000
mber computers and servers that rely on_x000D_subnet-site mappings dual-stack IPv4/IPv6 clients must have both IPv4 and global_x000D_
er '%3' this record must be_x000D_registered in DNS._x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_Determin
emote computers from attempting to connect to the domain controller '%3'_x000D_using an invalid record delete the record '%1' manuall
ailure to set up a secure session to determine why the request is failing. If the problem_x000D_persists please contact your domain admini
e a TransactionManager to go offline.
up the secure session to the primary domain controller emulator in the specified_x000D_domain. Otherwise this computer sets up the sec
000D_Otherwise the account is an interdomain trust account with the specified domain.
machine_x000D_account for the computer '%1' then '%1' should be marked cacheable for this_x000D_location if appropriate or otherwise
000D_records from the file '%SystemRoot%\System32\Config\Netlogon.dns' to the DNS database.
caused this failure resolve the problem and initiate_x000D_registration of the DNS records by the domain controller. To determine what m
e the_x000D_record. To learn more about debugging DNS see Help and Support Center._x000D__x000D__x000D__x000D_ADDITIONAL DA
this computer contain wrong IP address(es) of the preferred and alternate DNS servers_x000D__x000D_- Specified preferred and alternate
lure:_x000D__x000D_DsCrackNames status = 0x%3 crack error = 0x%4.
ddress maps to the selected site. This may require the_x000D_creation of a new subnet object (whose range includes the above IP address
e clients to one of the sites please consider creating_x000D_subnet object(s) covering the above IP addresses with mapping to one of the_x
000D_Otherwise the account is an interdomain trust account with the specified domain.
machine_x000D_account for the computer '%1' then '%1' should be marked cacheable for this_x000D_location if appropriate or otherwise
000D_records from the file '%SystemRoot%\System32\Config\Netlogon.dns' to the DNS database.
caused this failure resolve the problem and initiate_x000D_registration of the DNS records by the domain controller. To determine what m
e the_x000D_record. To learn more about debugging DNS see Help and Support Center._x000D__x000D__x000D__x000D_ADDITIONAL DA
this computer contain wrong IP address(es) of the preferred and alternate DNS servers_x000D__x000D_- Specified preferred and alternate
lure:_x000D__x000D_DsCrackNames status = 0x%3 crack error = 0x%4.
ddress maps to the selected site. This may require the_x000D_creation of a new subnet object (whose range includes the above IP address
e clients to one of the sites please consider creating_x000D_subnet object(s) covering the above IP addresses with mapping to one of the_x
ation if appropriate or otherwise ensure connectivity to a domain controller _x000D_capable of servicing the request (for example a writab
controller. To determine what might_x000D_have caused this failure run DCDiag.exe. To learn more about DCDiag.exe see Help_x000D_an
x000D__x000D_ADDITIONAL DATA_x000D__x000D_Error Value: %2
pecified preferred and alternate DNS servers are not running_x000D__x000D_- DNS server(s) primary for the records to be registered is no
ge includes the above IP address) which maps_x000D_to the selected site object.
es with mapping to one of the_x000D_existing sites. The names and IP addresses of the clients in question have_x000D_been logged on t
onfigured via the Group Policy or via a registry value 'DcTcpipPort'_x000D_under the 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
mpts_x000D_to connect to this domain controller using its unmapped IP address its mapped_x000D_address is used for the client's site ma
00D_registration of the DNS records by the domain controller '%3'. For help with determining_x000D_and resolving the problem see Help a
on failure. To learn more about troubleshooting DNS see_x000D_Help and Support._x000D__x000D__x000D__x000D_ADDITIONAL DATA_x
the value returned in the Additional Information) or enabling the TPM in the system BIOS.)
se this computer sets up the secure session to any domain controller_x000D_in the specified domain.
ation if appropriate or otherwise ensure connectivity to a domain controller _x000D_capable of servicing the request (for example a writab
controller. To determine what might_x000D_have caused this failure run DCDiag.exe. To learn more about DCDiag.exe see Help_x000D_an
x000D__x000D_ADDITIONAL DATA_x000D__x000D_Error Value: %2
pecified preferred and alternate DNS servers are not running_x000D__x000D_- DNS server(s) primary for the records to be registered is no
ge includes the above IP address) which maps_x000D_to the selected site object.
es with mapping to one of the_x000D_existing sites. The names and IP addresses of the clients in question have_x000D_been logged on t
onfigured via the Group Policy or via a registry value 'DcTcpipPort'_x000D_under the 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
mpts_x000D_to connect to this domain controller using its unmapped IP address its mapped_x000D_address is used for the client's site ma
00D_registration of the DNS records by the domain controller '%3'. For help with determining_x000D_and resolving the problem see Help a
on failure. To learn more about troubleshooting DNS see_x000D_Help and Support._x000D__x000D__x000D__x000D_ADDITIONAL DATA_x
he request (for example a writable domain controller)._x000D__x000D_Otherwise the following steps may be taken to resolve this problem
DCDiag.exe see Help_x000D_and Support Center. To initiate registration of the DNS records by this domain _x000D_controller run 'nltest.e
the records to be registered is not running_x000D__x000D_- Preferred or alternate DNS servers are configured with wrong root hints_x000
n have_x000D_been logged on this computer in the following log file_x000D_'%SystemRoot%\debug\netlogon.log' and potentially in the lo
INE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'_x000D_registry key; the value configured through the Group Policy takes p
ess is used for the client's site mapping._x000D__x000D__x000D__x000D_The log files %SystemRoot%\debug\netlogon.log or %SystemRoo
resolving the problem see Help and Support for information about troubleshooting_x000D_DNS. To initiate registration of the DNS records
0D__x000D_ADDITIONAL DATA_x000D__x000D_Error Value: %2
he request (for example a writable domain controller)._x000D__x000D_Otherwise the following steps may be taken to resolve this problem
DCDiag.exe see Help_x000D_and Support Center. To initiate registration of the DNS records by this domain _x000D_controller run 'nltest.e
the records to be registered is not running_x000D__x000D_- Preferred or alternate DNS servers are configured with wrong root hints_x000
n have_x000D_been logged on this computer in the following log file_x000D_'%SystemRoot%\debug\netlogon.log' and potentially in the lo
INE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'_x000D_registry key; the value configured through the Group Policy takes p
ess is used for the client's site mapping._x000D__x000D__x000D__x000D_The log files %SystemRoot%\debug\netlogon.log or %SystemRoo
resolving the problem see Help and Support for information about troubleshooting_x000D_DNS. To initiate registration of the DNS records
0D__x000D_ADDITIONAL DATA_x000D__x000D_Error Value: %2
be taken to resolve this problem:_x000D__x000D__x000D__x000D_If '%2' is a legitimate machine account for the computer '%1' then '%1
n _x000D_controller run 'nltest.exe /dsregdns' from the command prompt on the domain controller_x000D_or restart Net Logon service. _
ured with wrong root hints_x000D__x000D_- Parent DNS zone contains incorrect delegation to the child zone authoritative for the DNS rec
ogon.log' and potentially in the log file_x000D_'%SystemRoot%\debug\netlogon.bak' created if the former log becomes full._x000D_The lo
through the Group Policy takes precedence. If the_x000D_port specified is in error reset it to a correct value. You can also remove this_x00
bug\netlogon.log or %SystemRoot%\debug\netlogon.bak_x000D_contain the name unmapped IP address and mapped IP address for each
e registration of the DNS records by the domain controller '%3' run_x000D_'nltest.exe /dsregdns' from the command prompt on the domai
be taken to resolve this problem:_x000D__x000D__x000D__x000D_If '%2' is a legitimate machine account for the computer '%1' then '%1
n _x000D_controller run 'nltest.exe /dsregdns' from the command prompt on the domain controller_x000D_or restart Net Logon service. _
ured with wrong root hints_x000D__x000D_- Parent DNS zone contains incorrect delegation to the child zone authoritative for the DNS rec
ogon.log' and potentially in the log file_x000D_'%SystemRoot%\debug\netlogon.bak' created if the former log becomes full._x000D_The lo
through the Group Policy takes precedence. If the_x000D_port specified is in error reset it to a correct value. You can also remove this_x00
bug\netlogon.log or %SystemRoot%\debug\netlogon.bak_x000D_contain the name unmapped IP address and mapped IP address for each
e registration of the DNS records by the domain controller '%3' run_x000D_'nltest.exe /dsregdns' from the command prompt on the domai
t for the computer '%1' then '%1'_x000D_should be rejoined to the domain._x000D__x000D__x000D__x000D_If '%2' is a legitimate interd
D_or restart Net Logon service. _x000D_ Or you can manually add this record to DNS but it_x000D_is not recommended._x000D__x000D_
ue. You can also remove this_x000D_configuration for the port in which case the port will be assigned dynamically by_x000D_the endpoint
and mapped IP address for each partially_x000D_mapped client. The log files may also contain unrelated debugging information._x000D_T
command prompt on the domain controller '%3' or restart_x000D_the Net Logon service on the domain controller '%3'. Nltest.exe is a com
t for the computer '%1' then '%1'_x000D_should be rejoined to the domain._x000D__x000D__x000D__x000D_If '%2' is a legitimate interd
D_or restart Net Logon service. _x000D_ Or you can manually add this record to DNS but it_x000D_is not recommended._x000D__x000D_
ue. You can also remove this_x000D_configuration for the port in which case the port will be assigned dynamically by_x000D_the endpoint
and mapped IP address for each partially_x000D_mapped client. The log files may also contain unrelated debugging information._x000D_T
command prompt on the domain controller '%3' or restart_x000D_the Net Logon service on the domain controller '%3'. Nltest.exe is a com
00D_If '%2' is a legitimate interdomain trust account then the trust should_x000D_be recreated._x000D__x000D__x000D__x000D_Otherw
ecommended._x000D__x000D__x000D__x000D_ADDITIONAL DATA_x000D__x000D_Error Value: %2
N_x000D__x000D__x000D_Fix possible misconfiguration(s) specified above and initiate registration or deletion of_x000D_the DNS record
00D_out the needed information please search for lines which contain text_x000D_'NO_CLIENT_SITE:'. The first word after this string is the
amically by_x000D_the endpoint mapper at the time the NetLogon service on remote machines makes RPC connections_x000D_to this dom
debugging information._x000D_To locate the information pertaining to partial-subnet mappings search for_x000D_lines that contain the te
ontroller '%3'. Nltest.exe is a command line tool_x000D_that is built into Windows Server._x000D__x000D_ As a workaround you can manu
00D_If '%2' is a legitimate interdomain trust account then the trust should_x000D_be recreated._x000D__x000D__x000D__x000D_Otherw
ecommended._x000D__x000D__x000D__x000D_ADDITIONAL DATA_x000D__x000D_Error Value: %2
N_x000D__x000D__x000D_Fix possible misconfiguration(s) specified above and initiate registration or deletion of_x000D_the DNS record
00D_out the needed information please search for lines which contain text_x000D_'NO_CLIENT_SITE:'. The first word after this string is the
amically by_x000D_the endpoint mapper at the time the NetLogon service on remote machines makes RPC connections_x000D_to this dom
debugging information._x000D_To locate the information pertaining to partial-subnet mappings search for_x000D_lines that contain the te
ontroller '%3'. Nltest.exe is a command line tool_x000D_that is built into Windows Server._x000D__x000D_ As a workaround you can manu
_x000D__x000D__x000D_Otherwise assuming that '%2' is not a legitimate account the following_x000D_action should be taken on '%1':_x
etion of_x000D_the DNS records by running 'nltest.exe /dsregdns' from the command prompt on the domain_x000D_controller or by resta
first word after this string is the client name and_x000D_the second word is the client IP address. The maximum size of the log(s) is_x000D
C connections_x000D_to this domain controller. After the misconfiguration is corrected restart the NetLogon_x000D_service on this machin
_x000D_lines that contain the text 'PARTIAL_CLIENT_SITE_MAPPING:'. The first word after_x000D_this text is the client name. Following th
_ As a workaround you can manually add this record to DNS but it is not recommended_x000D_because you then must manually update a
_x000D__x000D__x000D_Otherwise assuming that '%2' is not a legitimate account the following_x000D_action should be taken on '%1':_x
etion of_x000D_the DNS records by running 'nltest.exe /dsregdns' from the command prompt on the domain_x000D_controller or by resta
first word after this string is the client name and_x000D_the second word is the client IP address. The maximum size of the log(s) is_x000D
C connections_x000D_to this domain controller. After the misconfiguration is corrected restart the NetLogon_x000D_service on this machin
_x000D_lines that contain the text 'PARTIAL_CLIENT_SITE_MAPPING:'. The first word after_x000D_this text is the client name. Following th
_ As a workaround you can manually add this record to DNS but it is not recommended_x000D_because you then must manually update a
ction should be taken on '%1':_x000D__x000D__x000D__x000D_If '%1' is a Domain Controller then the trust associated with '%2' should b
ain_x000D_controller or by restarting Net Logon service on the domain controller.
ximum size of the log(s) is_x000D_controlled by the following registry DWORD value_x000D_'HKEY_LOCAL_MACHINE\SYSTEM\CurrentCon
on_x000D_service on this machine and verify that this event log no longer appears.
t is the client name. Following the client name is the client's unmapped_x000D_IP address (the IP address that does not have a subnet-site
ou then must manually update any changes it requires hereafter._x000D__x000D__x000D__x000D_ADDITIONAL DATA_x000D__x000D_Err
ction should be taken on '%1':_x000D__x000D__x000D__x000D_If '%1' is a Domain Controller then the trust associated with '%2' should b
ain_x000D_controller or by restarting Net Logon service on the domain controller.
ximum size of the log(s) is_x000D_controlled by the following registry DWORD value_x000D_'HKEY_LOCAL_MACHINE\SYSTEM\CurrentCon
on_x000D_service on this machine and verify that this event log no longer appears.
t is the client name. Following the client name is the client's unmapped_x000D_IP address (the IP address that does not have a subnet-site
ou then must manually update any changes it requires hereafter._x000D__x000D__x000D__x000D_ADDITIONAL DATA_x000D__x000D_Err
ust associated with '%2' should be deleted._x000D__x000D__x000D__x000D_If '%1' is not a Domain Controller it should be disjoined from
_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize';_x000D_the default is %3 bytes. The current maxi
that does not have a subnet-site mapping) and the_x000D_client's mapped IP address which was used to return site information._x000D__
ONAL DATA_x000D__x000D_Error Value: %2
ust associated with '%2' should be deleted._x000D__x000D__x000D__x000D_If '%1' is not a Domain Controller it should be disjoined from
_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize';_x000D_the default is %3 bytes. The current maxi
that does not have a subnet-site mapping) and the_x000D_client's mapped IP address which was used to return site information._x000D__
ONAL DATA_x000D__x000D_Error Value: %2
oller it should be disjoined from the domain.
ult is %3 bytes. The current maximum size is %4 bytes. To set a_x000D_different maximum size create the above registry value and set the
eturn site information._x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_Use the Active Directory Sites and Servic
oller it should be disjoined from the domain.
ult is %3 bytes. The current maximum size is %4 bytes. To set a_x000D_different maximum size create the above registry value and set the
eturn site information._x000D__x000D__x000D__x000D_USER ACTION_x000D__x000D__x000D_Use the Active Directory Sites and Servic
above registry value and set the desired_x000D_maximum size in bytes.
Active Directory Sites and Services management console (MMC) snap-in_x000D_to add the subnet mapping for the unmapped IP address
above registry value and set the desired_x000D_maximum size in bytes.
Active Directory Sites and Services management console (MMC) snap-in_x000D_to add the subnet mapping for the unmapped IP address
ng for the unmapped IP addresses to the same site being_x000D_used by the mapped IP addresses. When adding site mappings for IPv6 a
ng for the unmapped IP addresses to the same site being_x000D_used by the mapped IP addresses. When adding site mappings for IPv6 a
adding site mappings for IPv6 addresses_x000D_you should use global IPv6 addresses and not for instance temporary link-local_x000D_o
adding site mappings for IPv6 addresses_x000D_you should use global IPv6 addresses and not for instance temporary link-local_x000D_o
e temporary link-local_x000D_or site-local IPv6 addresses._x000D__x000D__x000D__x000D_The default maximum size of the log files is %
e temporary link-local_x000D_or site-local IPv6 addresses._x000D__x000D__x000D__x000D_The default maximum size of the log files is %
maximum size of the log files is %3 bytes. The current maximum_x000D_size is %4 bytes. To set a different maximum size create the followi
maximum size of the log files is %3 bytes. The current maximum_x000D_size is %4 bytes. To set a different maximum size create the followi
maximum size create the following registry_x000D_DWORD value to specify the maximum size in bytes:_x000D__x000D__x000D_HKEY_LO
maximum size create the following registry_x000D_DWORD value to specify the maximum size in bytes:_x000D__x000D__x000D_HKEY_LO
000D__x000D__x000D_HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize
000D__x000D__x000D_HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize
rs\LogFileMaxSize
rs\LogFileMaxSize