Sei sulla pagina 1di 15

SASSCO

Saudi Arabian Sensing Solutions Co. Ltd.

Description: Digital Caliper Certificate No.: SC-160167


Manufacturer: Mitutoyo Date Received: 1-Jan-16
Model: CD-12"PSX Calibration Date: 1-Jan-16
Serial Number: 0004042 Calibrated By: S.C.
Tag Number: SS-048

Performance Test Data

Function UUT Expanded


Range Nominal Error
Tested Indication Uncertainty (±)

Preliminary Operations:

Smooth Operation of Measuring Jaws --- Ok

Measuring Jaws Parallel --- Ok

Zero Scale Indication mm mm mm µm


0.00 0.00 0.00 2886.8

Outside Dimension Indication mm mm mm µm


0 to 300 mm 50.00 50.00 0.00 2888.1
100.00 100.00 0.00 2886.8
200.00 200.00 0.00 2886.8
250.00 250.00 0.00 2886.8

Inside Dimension Indication mm mm mm µm


25 mm 50.00 25.01 -24.99 2886.8

Depth Dimension Indication mm mm mm µm


0 to 300 mm 50.00 50.00 0.00 2.9
100.00 100.00 0.00 2.9
200.00 200.00 0.00 2.9
250.00 250.00 0.00 2.9

General Information about the calibration


The Digital Caliper has been calibrated on the function of Dimensions: Outside, Inside and Depth.

Method
The calibration of the instument was carried out with direct method using the standard listed below.
During calibration the ambient temperature was 20.7 °C and the relative humidity was 48.7 %RH.

Calibration Uncertainty
The reported expanded uncertainty of measurement is stated as the standard uncertainty of
measurement multiplied by the coverage factor k = 2, corresponding to a coverage probability
of approximately 95%. The standard uncertainty of measurement has been determined in
accordance with EA Publication EA-4/02.

Physical Condition of the UUT


The unit under test is in good physical condition.

Page 1 of 15 QF-15, Rev. 03, 1-Jan-11


SASSCO
Saudi Arabian Sensing Solutions Co. Ltd.

Description: Digital Caliper Certificate No.: SC-160167


Manufacturer: Mitutoyo Date Received: 1-Jan-16
Model: CD-12"PSX Calibration Date: 1-Jan-16
Serial Number: 0004042 Calibrated By: S.C.
Tag Number: SS-048

Notes
The results reported in this certificate applies only to the specified instrument being calibrated.

Page 2 of 15 QF-15, Rev. 03, 1-Jan-11


SASSCO
Saudi Arabian Sensing Solutions Co. Ltd.

Description: Digital Caliper Certificate No.: SC-160167


Manufacturer: Mitutoyo Date Received: 1-Jan-16
Model: CD-12"PSX Calibration Date: 1-Jan-16
Serial Number: 0004042 Calibrated By: S.C.
Tag Number: SS-048

Stability
The readings given are the results at the time of calibration and do not carry any implication
regarding the long-term stability of the instrument.

Remarks
The values listed above were "As-Found, As-Left".

Standards Used

Description ID NO. Model Due Date Certificate No. Traceablity


Gauge Block Set SS-067 516-942-11 19-Nov-17 125383 UKAS

Page 3 of 15 QF-15, Rev. 03, 1-Jan-11


Uncertainty Analysis

Dimensional (Caliper)

Uncertainty Contributions
50 mm
UA (Repeatability) 0.00E+00
UB1 (Uncertainty of Ref) 4.00E-05
UB2 (Drift) 4.33E-02
UB3 (Resolution) 1.44E+00
UB4 (Temp Effect) 2.10E-05
UB5(Data Logger) 1.68E-05

U (Combined Uncertainty) 1.44E+00

Expanded Uncertainty (k=2) 2.89

100 mm
UA (Repeatability) 0.00E+00
UB1 (Uncertainty of Ref) 4.00E-05
UB2 (Drift) 1.73E-05
UB3 (Resolution) 1.44E+00
UB4 (Temp Effect) 4.20E-05
UB5(Data Logger) 3.36E-05

U (Combined Uncertainty) 1.44E+00

Expanded Uncertainty (k=2) 2.89E+00 mm

200 mm
UA (Repeatability) 0.00E+00
UB1 (Uncertainty of Ref) 4.00E-05
UB2 (Drift) 0.00E+00
UB3 (Resolution) 1.44E+00
UB4 (Temp Effect) 8.41E-05
UB5(Data Logger) 6.72E-05
U (Combined Uncertainty) 1.44E+00

Expanded Uncertainty (k=2) 2.89E+00 mm

250 mm
UA (Repeatability) 0.00E+00
UB1 (Uncertainty of Ref) 4.00E-05
UB2 (Drift) 0.00E+00
UB3 (Resolution) 1.44E+00
UB4 (Temp Effect) 1.05E-04
UB6(Data Logger) 8.40E-05

U (Combined Uncertainty) 1.44E+00

Expanded Uncertainty (k=2) 2.89E+00 mm

Error of Indication (Measurement)


Nom
Partial EMPE 10.00

Repeatability RMPE 25.00

Scale Shift SMPE: 25.00


Ring Gauge 25.00

Full Scale JMPE 25.00


Outside Measurement
Nom 50 mm 100 mm 200 mm 250 mm 0 mm
50.00 100.00 200.00 250.00 0.00
50.00 100.00 200.00 250.00 0.00
5- 100.00 200.00 250.00 0.00
50.00 99.99 200.00 250.00 0.00
50.00 100.00 200.00 250.00 0.00
0.00
Ave 50.00 100.00 200.00 250.00 0.00E+00
STDEV 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
UA 0.00E+00 0.00E+00 0.00E+00 0.00E+00 8.00E-05

Temp Coefficient:
1.12E-05 K Factor
Change in Temp: 0.1300 Uncertainity contribution due to Data Logger
T1 22.04 Resolution 10.000
T2 22.17

E2 E1
Drift (Slip Gauge Set)-50 mm 0.000100 0.000050
0.000050

E2 E1
Drift (Slip Gauge Set)- 100 m 0.000080 0.000100
0.000020

E2 E1
Drift (Slip Gauge Set)- 200 m 0.000090 0.000090
0.000000

E2 E1
Drift (Slip Gauge Set)- 250 m 0.000060 0.000060
0.000000
Zero Scale Indication 0 mm
UA (Repeatability) 0.00E+00
UB1 (Uncertainty of Ref) 4.00E-05
UB2 (Drift) 0.00E+00
UB3 (Resolution) 1.44E+00
UB4 (Temp Effect) 0.00E+00
UB5(Data Logger) 0.00E+00

U (Combined Uncertainty) 1.44E+00

Expanded Uncertainty (k=2)2.89E+00 mm

Error of Indication

top mid bottom Mean


9.99 9.99 9.99 9.99 0.01
9.99 9.99 9.99 9.99 0.01
9.99 10.00 9.99 9.99 0.01
9.99 9.99 9.99 9.99 0.01

top mid bottom


25.00 25.00 24.99 25.00 0.00
24.99 25.01 25.00 25.00 0.00
25.00 25.00 25.00 25.00 0.00
25.00 25.00 25.00 25.00 0.00

rdg 1 (External) rdg 2 (internal) Error 1 Error 2


25.00 24.99
24.99 24.99
25.00 24.98
25.00 24.99 0.00 0.01
rdg 1 rdg 2 rdg 3
24.99 24.98 24.99 24.99 0.01

25.01 25.00 25.01 25.01 0.01


Inside Measurement Depth Measurement Inside Measurement
Nom 25 mm Nom 50 mm UA (Repeatability)
25.01 50.01 UB1 (Uncertainty of Ref)
25.01 50.01 UB2 (Drift)
25.01 50.01 UB3 (Resolution)
UB4 (Temp Effect)
Ave 25.01 Ave 50.01 UB5(Data Logger)
STDEV 0.00E+00 STDEV 0.00E+00
UA 0.00E+00 UA 0.00E+00 U (Combined Uncertainty)

Uncertainity from calibration certificate (E2) Expanded Uncertainty (k=2)

Depth Measurement
2.00E+00 UA (Repeatability)
0.0600 Depth Measurement UB1 (Uncertainty of Ref)
Nom 100 mm UB2 (Drift)
100.00 UB3 (Resolution)
100.00 UB4 (Temp Effect)
100.00 UB5(Data Logger)

Ave 100.00 U (Combined Uncertainty)


STDEV 0.00E+00
UA 0.00E+00 Expanded Uncertainty (k=2)

Depth Measurement Depth Measurement


Nom 200 mm UA (Repeatability)
200 UB1 (Uncertainty of Ref)
200.00 UB2 (Drift)
200 UB3 (Resolution)
UB4 (Temp Effect)
Ave 200.00 UB5(Data Logger)
STDEV 0.00E+00
UA 0.00E+00 U (Combined Uncertainty)

Expanded Uncertainty (k=2)


Depth Measurement
Nom 250 mm
250 Depth Measurement
250.00 UA (Repeatability)
250.00 UB1 (Uncertainty of Ref)
UB2 (Drift)
Ave 250.00 UB3 (Resolution)
STDEV 0.00E+00 UB4 (Temp Effect)
UA 0.00E+00 UB5(Data Logger)

U (Combined Uncertainty)
Expanded Uncertainty (k=2)

Depth Measurement
UA (Repeatability)
UB1 (Uncertainty of Ref)
UB2 (Drift)
UB3 (Resolution)
UB4 (Temp Effect)
UB5(Data Logger)

U (Combined Uncertainty)

Expanded Uncertainty (k=2)

of Indication
25 mm
0.00E+00
4.00E-05
4.33E-05
1.44E+00
2.10E-05
8.40E-06

1.44E+00

2.89E+00 mm

50 mm
0.00E+00
4.00E-05
4.33E-05
1.44E-03
2.10E-05
1.68E-05

1.44E-03

2.89E-03 mm

100 mm
0.00E+00
4.00E-05
1.73E-05
1.44E-03
4.20E-05
3.36E-05

1.45E-03

2.89E-03 mm

200 mm
0.00E+00
4.00E-05
0.00E+00
1.44E-03
8.41E-05
6.72E-05

1.45E-03
2.90E-03 mm

250 mm
0.00E+00
4.00E-05
0.00E+00
1.44E-03
1.05E-04
8.40E-05

1.45E-03

2.90E-03 mm
Uncertainty Budget for Calibration of Calipers

Std Probability
Symbol Source of Uncertainty Divisor
Uncertainty Distribution
UA Standard Deviation rectangular Ö3
UB1 Uncertainty of Ref. normal 2
UB2 Drift of Calibration Std. rectangular Ö3
UB3 Resolution of the UUT rectangular 2Ö3
UB4 Temperature Effect of Std. rectangular 2Ö3
UB5 Data Logger normal 2

UC Combined Uncertainty
U Expanded Uncertainty (k=2)

Sources of Uncertainties

1. Repeatabilty of Measurement
- Number of readings per test point. Recommended at least 3 readings.

2. Uncertainty of Ref.
- The related uncertainty of Gauge Block from calibration certificate.

3. Drift of Calibration Std.


- The diference between the error of the two successive calibration certificate of the Std.
4. Resolution of the UUT
- The least significant value that you can read.
5. Temperature Effect of Std.
- The length of the gauge block multiplied by the temp coeficient 11.5 x 10E-6 multiplied by the between the
measurement in increasing and decreasing cycle.
the change in ambient temperature.

6. Data Logger
The data logger which monitors enviorment also includes the uncertainity which is to be included in final result
alipers

Uncertainty Contributions

ate of the Std.

0E-6 multiplied by the between the

which is to be included in final result

Potrebbero piacerti anche