Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MODEL FE-700
IMO 9237008
GSI 0130004
M"^
A SAFETY INSTRUCTIONS
A WARNING WARNING
ELECTRICAL SHOCK HAZARD Keep heater away from equipment.
Do not open the equipment.
A heater can melt the equipment's power
Only qualified personnel cord, which can cause fire or electrical
should work inside the shock.
equipment.
Use the proper fuse.
Immediately turn off the power at the
switchboard if water leaks into the Use of a wrong fuse can result in equipment
equipment. damage and void the warranty.
A A
Continued use of the equipment can cause
fire or electrical shock. Contact a FURUNO
agent for service.
II
CONTENTS
3.4 System Menu 3 13
FOREWORD iv
III
FOREWORD
Dedicated in the design and manufacture of The main features of the FE-700 are
marine electronics equipment for half a century, 1. Complies with the IMO and ISO standards
FURUNO Electric Company has gained an MSC. 74(69) Annex 4 and ISO9875.
unrivaled reputation as a world leader in the
2. Cost-effective; no paper, no consumables;
industry. This is the result of our technical
high accuracy and high reliability - no rotating
excellence as well as our worldwide distribution
gears and belts as in the paper echo
and service network.
sounders
Please carefully read and follow the safety 3. High-contrast 6.5-inch color LCD display
information and operating and maintenance featuring a wide viewing angle and adjustable
instructions set forth in this manual before brightness.
attempting to operate the equipment and
4. Wide variety of modes with never-get-lost
conduct any maintenance. Your navigational
default position.
echo sounder will perform to the utmost of its
ability only if it is operated and maintained in 5. Automatic function permits unattended
accordance with the correct procedures. adjustment of range, gain, and pulselength.
The range scale and gain automatically
change to display the bottom.
This equipment is designed, produced and 6. Position, course, speed, time are repeated
documented by FURUNO ELECTRIC CO., LTD., from the external devices.
complying with ISO 9001 standards as certified
by the Lloyd's Register of Quality Assurance 7. Alarms: shallow water, bottom lost, power
System. drop
IV
SYSTEM CONFIGURATION
DISPLAY UNIT
00 FE-701
oo
oo
0
O
O
TERMINAL BOX
(~3) DS-802
I IEC 61162-1
DISTRIBUTION j p Navigation Device
BOX j j IEC 61162-1 .. . t. „ .
| ! Navigation Device
FE-702
I"l!j EIA-232C
Personal Computer
CONTACT CLOSURE
Alarm Unit
Ship's mains
100-115 VAC/200-230 VAC
or
24VDC
: Standard Supply
- : Optional Supply
: Local Supply
TRANSDUCER
PRINCIPLE OF OPERATION
The FE-700 uses ultrasonic pulses to detect the seabed and other underwater objects. The display unit
contains all basic electric circuits and logic processor. Electrical pulses are converted into acoustical
energy in the transducer fitted on the ship's hull. The processor measures the time of pulses travelling
between the seabed and transducer and displays the water depths in the graphical form or other forms.
The transducers have a specific beam width with respect to their working frequency, 50 kHz or 200 kHz.
The high frequency has a narrow beamwidth and is immune to aeration when the ship is going astern or in
rough weather. The low frequency has a wide beamwidth and more powerful sounding capability.
SPECIFICATIONS OF FE-700
1. Display
15. Power Supply
Graphical display on 6.5" color LCD,
24 VDC, 20 W max
8 colors or 8 level monochrome,320 x 234 pixels.
Display area 133 x 97 mm 115/230 VAC, 20 VA max (factory set 230 V)
Display window for 15 min always assured on 16. Environmental Conditions (IEC 60945)
ranges 20 m, 40 m and deeper scales. Data Temperature: -15°C to +55°C
storage 24 h at intervals of 5 s. Playback at Waterproofing: Display unit: IPX5 (IEC
intervals of 5 s, 1 or 2 min. 60529) and CFR46 (USCG)
2. Display Modes Nav, DBS, History, etc. Distribution box, Matching box: IPX2
3. Frequency 50 or 200 kHz 17. Coating color
4. Output Power 600 W rms Display unit
5. Range Scale 5, 10, 20, 50, 100, 200, 400, Panel, Frame: Dark gray N3.0 Newtone no.5
800 m (In other than NAV mode, the Housing: Gray 2.5GY5/1.5
measurement unit can be 15, 30, 60, 120, 300, Distribution box: Housing: Gray 2.5GY5/1.5
600, 1500, 2500 feet; or 3, 5, 10, 20, 50, 100,
200, 400 fathoms) EQUIPMENT LIST
Accuracy ± 2.5% on any range Standard
Minimum Range 1.2 m (200 kHz), 1. Display unit FE-701 1 unit
2.0 m (50 kHz) 2. Distribution box FE-702 1 unit
8. Discrimination 5.8 mm per meter depth on 3. Matching box MB-502 (for 50 kHz), MB-504 (for
20 m range, 0.58 mm on 200 m range 200 kHz) 1 unit
9. Draft 0-30 m in 0.1 m steps, 4. Transducer with cable 50B-6B (15/40m),
10. Alarm Shallow water(default 20m), 200B-8B(15m) 1 unit
Bottom loss; Power/battery 5. Transducer Tank TTF-5600 (for Xdr 50B-6B),
drop (relay output) TTF-2000 (for Xdr 200B-8B)
11 Pulse Repetition Rate (PRR) 20 mmT standard, 12/25 mmT optional 1 unit
Depth (m) P/L (ms) PRR (pulses/minute) Options
5, 10 0.25 750 1. Transducer switch box EX-8
20 0.25 750 2. Digital depth indicator FE-720
40 0.38 375 3. Remote dimmer box for FE-720
100 1.00 150 4. Dimmer MF-22L
200 2.00 75 5. Waterproof junction box JIS F8821-1
400, 800 3.60 42
12. Picture Advance CATEGORY OF EQUIPMENT
Range (m) Display window (minute) Display unit: For Protected area
5, 10, 20 1.8/15 Distribution box: For Protected area
40,100 8/15 Matching box: For Protected area
200 20 Junction box: For Protected area
400, 800 30 Transducer: For Submerged area
13. Interface IEC 61162-1
Inputs: RMA, RMC, GLL, VTG,
ZDA, GGA
Output: DPT
Other interface: EIA 232C for PC
14. Transducer Type and Beamwidth
50B-6B: 35°, 200B-8B: 6°
SP-1-
1 OPERATION
1.1 Control Description
All operation of the FE-700 is carried out with the controls on the front panel of the display unit. Rotary
controls respond immediately to your command but some touch keys require the successive operation.
Display mode
Gain setting
FORE
RANGE: 4
GAIN: 5.5
MODE: NAV
LOGBOOK
HISTORY ^~~^ OS DATA
DBS / f—x \ HELP
NAV É — MENU
Explanation of depth
(Below transducer, or
below surface)
1.3 Turning On/Off 1.4 Tone and Brilliance
1. Turning on: Press the POWER Switch. 1. Press the BRILL key. The tone and brilliance
Self-test starts, showing the condition of the setting window appears.
logic circuits. The program number is
LOW T A HIGH
displayed. DDII 1•
DKILL.
LOW- + HIGH
ROM: OK TONE: 3 > • • D DD D D D
DRAM: OK
SRAM: OK
2. Press the [+] or [-] key for desired tone (in
BATTERY: OK
reality, Contrast).
;' - \( + }
æ
) /*LP
The LOGBOOK shows time, depth and own ship This display mode indicates own ship position,
position in tabular form in a pop-up window. The GPS-derived course and speed, and time and
logging is selected with the INTERVAL option on depth in digital form. You can read the data of
the menu among 5 s, 1 min and 2 min. (See your particular interest in large characters. The
section 2.6.) screen continues to display the sounding data in
the background. Part of graphical indication is
There are 60 pages and the total memory
visible to the right of data slips.
capacity is 720 points. Page 60/60 is the latest
data and 1/60 is the oldest data. Pressing [-] or TRUE(true course) or
MAG (magnetic course) appears.
[+] key changes the pages.
^s«™«^™*««^*«»»»^ «»»s»™»«««
•«"«"»•»*»"»•«
(DRtFTjl I.'/JMEQ
( gM ) ( BRILL 'l
POSITION DGPS ™™ ™
TIME t\ *&-*
135°23.123'E 11 :23:45 "liffXyE
11:02:00 47.5 36°55.013'N DEPTH ** '.^"'
135°23.123'E 47. 5m 83**»
( fpowen"0
TIME UTC
11:23:45
DEPTH
172m
Note: When lat/long data input error occurs in
the DATA 1 mode, "EPFS" ERROR
appears on the screen. (EPFS: Electronic
Position-Fixing System such as GPS
receiver)
Enlarging data of interest 1.6.7 MENU display
You can enlarge one of the data indications as
The menu provides functions which normally do
follows:
not require frequent adjustment. For details see
1. Press the [A] or [T] key to select the data Chapter 2.
you want to enlarge. Current section is
• etUfTEB'::-
circumscribed with the blue cursor. For
(0-16)
example, select the depth cell.
INTERFERENCE REJECT
2. Press the [+] key.
IR1 IR2 IR3
PICTURE ADVANCE
DEPTH FAST
TREND
172m OFF
5s
INTERVAL
2 min
1/2
3. To return to the original display, press the [-] VA: To select item
key.
To set option
— +
PRESS KEY.
MUTE ALARM
To set or
acknowledge alarms:
1. Press MUTE ALARM key.
2. Press [-] or [+]
key to set alarm
depth.
3. Press MUTE ALARM
key to silence
the alarm.
PRESS KEY.
1.7 Range Scale • Clutter level (on the menu), which works as a
threshold control°to'suppress overall noise, is
If the depth goes out of the correct display area,
automatically adjusted.
increase or decrease the range until the seabed
appears near the center of the screen. Note: The AUTO MODE is cancelled whenever
the range or the gain is changed.
Adjust the Range Control, and current range
selection is shown in the range display window.
How to enable/disable automatic
RANGE 5m
operation
In the AUTO mode, the range scale is
automatically adjusted. See section 1.9 for 1. Press the AUTO key. The AUTO mode
details. window appears.
AUTO MODE
1.8 Gain Control
ON
The GAIN Control adjusts the sensitivity of the
receiver. The AUTO mode provides automatic - / +: To set option
adjustment and you are normally not required to
adjust it. Current setting is shown at the upper
2. Press the [+] key to select ON or the [-] key
left-hand corner. Adjust the GAIN Control and the
to select OFF.
following window appears.
1. Press the MUTE ALARM key to display the -/+: To set option
depth alarm setting window.
DEPTH ALARM 3. Press the [+] key to increase the setting
10m depth and [-] key to decrease it. The setting
- / +: To set option depth is 0 to 30 m in steps of 0.1 m.
The above window disappears in 10 seconds.
2. Press the [+] or [-] key to change setting The draft setting is displayed at the upper right
depth. The setting is shown digitally at the corner and the range scale is shifted according to
top of the screen and graphically key the the draft setting.
depth alarm line.
8
2 MENU OPERATION
2.1 Menu Overview 2.2 Suppressing Low Level
The menu has several functions for advanced Noise
operation. Light-blue dots may appear overall screen. This
1. Select MENU with the MODE Selector. is mainly due to dirty water or noise. This noise
can be suppressed by adjusting CLUTTER (in
'CLUTTER
reality, Threshold of the amplifier).
(0-16)
When the automatic mode is on, the
INTERFERENCE REJECT
suppression setting is automatically adjusted.
OFF] IR1 IR2 IR3 For manual override, do the following:
PICTURE ADVANCE
1. Select MENU with the MODE Selector.
SLOW] FAST
TREND
2. Select CLUTTER by pressing the [A] key.
2. Press the [A] or [T] key to select menu 2.3 Suppressing Interference
item. As you operate the [A] or [T] key, the
Interference from other acoustic equipment
selected item and its current setting appear
operating nearby or other electronic equipment
in reverse video.
on your boat may show itself on the display.
3. Press the [-] or [+] key to select option
To suppress interference, do the following:
desired.
1. Select MENU with the MODE Selector.
4. Set the MODE Selector in another position
to close the menu. 2. Select INTERFERENCE REJECT by
pressing the [A] or [T] key.
2.5 Trend
The future trend of the seabed depths can be
predicted over a specified period of time (See
page 13). The trend index is set with the item
TREND and appears at the top left corner. The In this example, the setting of INTERVAL is
default setting is ON. 1 minute. That is, the depth and lat/long data are
displayed at 1 minute intervals.
6 is inclination angle of bottom.
-10°>e>-45° -45°>e>-90°
10
3 SYSTEM MENU
3.1 System Menu The system menu 1 appears.
The system menu should be set just after 5. With the cursor selecting MENU SELECT,
installation and is not always necessary to be operate the [-] or [+] key to select system
adjusted. If you change any items of the system menu desired; 1, 2 or 3.
menu or even if you open the system menu, the SYSTEM MENU 1
sounding picture will be cleared. There are three MENU SELECT 1 2 3
menus: 1,2,and 3. DEPTH UNIT m| ft fa
SPEED UNIT kt] MPH km/h
1. Select MENU with the MODE Selector. COURSE TRUE| MAG
CLUTTER BOTTOM LOST OFF] ALARM
1 (0-16) INTERFACE 1:95 |1:98| NMEA
ALARM SOUND | 2 3
INTERFERENCE REJECT OS DATA |DATA1| DATA2
LANGUAGE |English|
OFF] IR1 IR2 IR3
T A: To select item
PICTURE ADVANCE - +: To set option
SLOW] FAST Select other mode to exit.
TREND 1 Press [+] at menu 1.
T Press [-] at menu 2.
OFF ON
SYSTEM MENU 2
INTERVAL MENU SELECT 1 | 3
2 min TIME ADJUST INTERNAL) EXTER NAL
1/2 DAY 1
TA: To select item MONTH JAN]
YEAR 20011 (-2100)
- +: To set option
HOUR CJ (0-23)
MINUTE 0 (0-59)
2. Press the [T] key several times to display SECOND O) (0-59)
following window.
01 JAN 2001 00:00 00
CAUTION!
SYSTEM MENU IS ONLY T A: To select item
FOR INSTALLATION. DO
- +: To set option
NOT CHANGE SETTINGS.
Select other mode to exit.
i Press [+] at menu 2.
[GO TO SYSTEM MENU?| T Press [-] at menu 3.
11 YES SYSTEM MENU 3
MEHU SELECT 1 2 1
2/2
BASIC RANG E 1 | (2-800)
L : To select item RANGE2 Ø m
+: To set option RANGES 20
RANGE4 |401
RANGES pJOOl
3. Select YES by pressing the [+] key.
RANGE6 200
Confirmation message "ARE YOU SURE?" RANGE? 4 DO
appears. RANGES 8 DO
TREND F min
4. Press the [+] key again. KEEL DISTANCE ]cXÖ|m
11
3.2 System Menu 1 3.3 System Menu 2
DEPTH UNIT: Selects unit of depth TIME ADJUST: Selects internal clock or external
measurement among meters, feet, or fathoms. clock (UTC clock). Default setting is INTERNAL.
Default setting is meters. For INTERNAL, set current day, month, year,
hour, minute and second with [+], [-], [V] or [A]
If "ft" or "fa" is selected, the depth unit is shown
in red characters. key. The setting clock appears and it counts
upward.
SPEED UNIT: Selects unit of speed SYSTEM MENU 2
measurement among knots, statute miles per MENU: SE1ECT| 1 3 i
hour, or kilometers per hour. Default setting is TIME ADJUST INTERNAL] EXTERNAL
knots. Requires speed data, from external DAY 1
device. MONTH JAN]
YEAR 2001 (-2100)
COURSE: Selects heading reference; true or HOUR 0 (0-23)
magnetic. Default setting is TRUE. MINUTE 0 (0-59)
SECOND 0 (0-59)
BOTTOM LOST: Turns on or off the bottom loss
warning. ON sounds the alarm if the bottom 01 JAN 2001 00 00:00
signal is not detected. Default setting is alarm
ON. T A: To select item
- +: To set option
INTERFACE: Selects I/O signal format between Select other mode to exit.
the FE-700 and external equipment; I EC format
"1:95" (1995 version) or "1:98" (1998 version), or If EXTERNAL is selected, the screen changes
NMEA format. Default setting is IEC "1:98". as follows.
When selecting the "1:98", DPT has max. range SYSTEM MENU 2
in use (See page 24). MENU SELECT 1 I 3
TIME ADJUST INTERNAL [EXTERNAL]
Output Input TIME DIFFERENCE |AUTO| MANUAL
IEC 61162-1 DPT RMA, RMC
GLL, VTG 0:22:40
ZDA, GGA
NMEA 01 83 DBT(Ver.1.5) RMA, RMC
DBS (Ver. 1.5) GLL, VTG
DPT (Ver.2.0) ZDA, GGA T A: To select item
- +: To set option
ALARM SOUND: Selects audio alarm sound Select other mode to exit.
among 1, 2 or 3. Default setting is 1.
1: Continuous sound TIME DIFFERENCE: Selects auto (UTC) or
2: Intermittent sound; 0.5 s on and 0.5 s off. manual. Auto uses the time difference in ZDA
3: Intermittent sound; 1 s on and 1 s off. (IEC 61162-1). In manual, it is necessary to
OS DATA: Selects own ship data display mode; enter the time difference in hours and minutes.
DATA 1 or DATA 2. DATA1 is the default setting.
If a navigation device is not connected to the
FE-700, select DATA 2.
12
3.4 System Menu 3
SYSTEM MENU 2
MENU SELECT "1 g 3 RANGE 1- 8: Activates or deactivates specific
TIME ADJUST INTERNAL [EXTERNAL! range scales. Default ranges are 5, 10, 20, 40,
TIME DIFFERENCE AUTO [MANUAL^ 100, 200, 400, and 800 (meters). Setting area is
TIME DIFF HOUR© (0-13) 2 m to 800 m. The ranges 20 m and 200 m can
TIME DIFF MIN | (0-59)
not be changed. They are essential in this
TIME DIFF SIGN - , Ø
equipment.
0:22:40
TA: To select item Note: Ranges must be set in numerical order.
- +: To set option For example, if range 1 is 5 m and range 3 is 20
Select other mode to exit. m, range 2 should be between 6 and 19m.
13
4 ECHO QUALITY SETTING
This chapter describes functions useful for 4.2 Transducer Setting
improving echo sounding performance.
After installing the equipment, set the transducer
as follows.
4.1 Demonstration Display
1. Press the [+] key at the EXTENSION MODE
The demonstration program shows how the display. The following window appears.
FE-700 works. TRANSDUCER SETTING
XDR FORE NM 50kHz 200kHz
1. Turn off the equipment.
XDR AFT N/A 50kHz 200kHz
2. Press the POWER Switch while pressing any
key. Release the key when the following Y A: To select item
EXTENSION MODE display appears. - +: To set option
EXTENSION MODE
2. Set as follows by using [A] or [T] to select
+ TRANSDUCER SETTING
TEST an item and [+] or[-] to set option.
A CLEAR MEMORY
a) If only one transducer is installed, set
T DEMONSTRATION
XDR FORE field to 50 kHz or 200 kHz,
SELECT MODE
according to actual installation. Leave the
3. Press the [T] key to select XDR AFT field as "N/A."
DEMONSTRATION. b) If two transducers are installed via the
DEMONSTRATION switch box EX-8, set XDR FORE field and
XDR AFT field to 50 kHz or 200 kHz,
OFF ON according to actual installation.
14
4.3 Bottom Level system. Outside this range the echoes from the
seabed and fish schools are received in full level.
If the depth indication is unstable or tne seabed There is no perceivable deterioration in
cannot be displayed steadily notwithstanding the performance.
adjustment of the control panel, you may adjust
1. Press the DRAFT key three times at the
the bottom echo level.
EXTENSION MODE display. The TVG
SELECT window appears.
TVG SELECT
CAUTION
If the level is set too low, the FE-700 200kHz = 5(0-9)
may not be able to distinguish the
bottom from fish echo and the -+: 200kHz
depth indication may be unstable
and if set to high the depth
indication does not appear. 2. Set the TVG curve with [+] or [-]. The default
level is 5. Attenuation compensation curve is
1. Press the MUTE ALARM key three times at at 20LogR curve.
the EXTENSION MODE. The start-up screen 3. Press the POWER switch to finish the
appears and shortly thereafter the BOTTOM adjustment. Wait 5 s, and then turn it on
LEVEL display appears. again.
BOTTOM LEVEL
200kHz = 80(20-200)
200kHz* 4.5 Echo Offset
*: Either 200 kHz or 50 kHz is displayed
The echo offset feature functions to compensate
depending on which frequency is used.
for too weak or too strong echo level. If the on-
screen echo level appears to be too weak or too
2. Set the level with the [+] or [-] key. The
strong and the level cannot be adjusted
default level is 80.
satisfactorily with the GAIN control, do the
3. Press the POWER switch to finish the following to adjust echo level.
adjustment. Wait about 5 s and then turn on
1. Press the DIM key three times at the
the power again.
EXTENSION MODE display. The ECHO
OFFSET screen appears.
4.4 TVG Level ECHO OFFSET
15
5 OPERATION OF DIGITAL DEPTH
INDICATOR FE-720 (OPTION)
2. Press [4\ or [^] until the required value is
reached. The range of adjustment is from
Omnipad O (Min.) to 63 (Max.). The default is 48.
3. Press the ENT key to set.
5.1.1 Turning on
123m
Press the POWER key. The unit beeps and starts
BELOW TRANSDUCER
up with the last-used display. To turn off the unit,
press the POWER key again. Depth below transducer
EXIT: [ENT]
16
5.2 Menu Operation 5.2.2 Selecting language
The language'in use on the screen is either
5.2.1 Dimmer control English or Japanese.
1. Press the MENU key to display main menu.
The dimmer is controlled either with the DIM key,
or the optional Dimmer Controller. The method of 2. Press [A] or [T] to select the ^*>=>7LANG
control must be selected on the menu.
3. Press the ENT key. The following window
1. Press the MENU key to display the main appears.
menu.
ENGLISH
MENU
DIM CONTROL
PANELONLY
ENGLISH 4. Press [A] or [T] to select appropriate option.
UNITS m
The default is English.
ALARM SET ON
TEST 5. Press the ENT key to set.
6. Press the MENU key to finish.
2. Press [A] or [T] to select DIM CONTROL.
17
5.2.4 Alarm 4. With YES selected, press the ENT key to
start the test. The equipment tests the ROM
You can set turn alarm on or off. In the ON mode, and RAM, displaying the results as OK or
if the main display unit activates the alarm, the NG (No Good). If NG appears, contact your
FE-720 also. dealer for advice.
1. Press the MENU key to display main menu. TEST
ROM :OK
2. Press [A] or [T] to select ALARM. RAM :OK
3. Press the ENT key. The following window
PUSH KEY
appears.
(STOP: PWR OFF)
CNT001 65-5-0100-003
OFF
5. After "PUSH KEY" is displayed, press each
4. Press [A] or [T] to select appropriate option. key one by one. The name of the key
The default is ON. pressed momentarily appears if the key is
5. Press the ENT key to set. functioning properly.
6. Press the MENU key to finish. The display shows the following message to
If the alarm sounds, press any key to silence it. inform you that the program is now going to
check the LCD.
5.3 Diagnosis
The diagnostic test checks ROM, RAM, keys and <LCD CHECK>
LCD of the FE-720. ALL ON 2 SEC
ALL OFF 3 SEC
1. Press the MENU key to display main menu.
2. Press [A] or [T] to select TEST.
The whole display brightens for 2 seconds then
3. Press the ENT key. The following window turns off for 3 seconds. Test repeats. CNT, which
appears. is number of times the test has been
consecutively executed, is counted up.
TEST START?
(STOP: PWR OFF) 6. To stop the test, turn off the power.
ARE YOU SURE?
SÜ NO
5.4 Factory Setting
You can restore default settings to start operation
anew. Press the POWER switch while pressing
[A]. The message "RESET BACKUP DATA!"
appears. After a while, all default settings are
restored and the depth indication appears.
18
6 MAINTENANCE,TROUBLESHOOTING
6.3 Transducer Maintenance
WARNING Marine life on the transducer face will result in a
Do not open the cover. gradual decrease in sensitivity. Check the
transducer face for cleanliness each time the
There are no user-serviceable parts inside. ship is dry-docked. Carefully remove any marine
Refer any repair work to a qualified life with a piece of wood or fine-grade sandpaper.
technician.
19
6.5 Troubleshooting
The table below provides simple troubleshooting procedures which you may follow to restore normal
operation. If you cannot restore normal operation, contact your dealer.
20
6.6 Diagnostic Test 6.7 Test Pattern
The diagnostic test checkS"the~RO1\/l7RÄMrcöior The test pattern is used to check color
bar and keyboard for proper operation. performance.
1. Turn on the power while pressing any key. 1. Turn on the POWER SWITCH while pressing
Release the keys when the following display any key.
appears.
2. Press the BRILL key three times. Press the
EXTENSION MODE BRILL key again to change the test pattern
TRANSDUCER SETTING
as below.
TEST
CLEAR MEMORY
DEMONSTRATION
SELECT MODE
BLACK
Color bar
(16 colors)
21
6.8 Clearing the Memory
All menu settings can be cleared to start afresh.
All default menu settings are restored when the
memory is cleared. For your reference all default
settings are shown in the menu tree at the end of
this manual.
1. Turn on the power while pressing any key.
Release the keys when the EXTENSION
MODE menu appears.
2. Press the [A] key. The following window
appears.
+:YES
-:NO
22
7 MENU TREE
FLUTTER (AUTO, 0-16, 9) Default settings
INTERFERENCE REJECT (OFF, IR1, IR2, IR3) shown in bold.
PICTURE ADVANCE (SLOW, FAST)
TREND (ON, OFF)
INTERVAL (5 s, 1 min, 2 min)
_GO TO SYSTEM MENU? (NO, YES)
23
8 DIGITAL INTERFACE
(IEC 61162-1 EDITION 2)
1. I/O Sentences
Transmission interval
1 s for any sentence
Data transmission
Data is transmitted in serial asynchronous form in accordance with the standard referenced in 2.1 of
IEC 61162-1. The first bit is a start bit and is followed by data bits, least-significant-bit as illustrated
below.
The following parameters are used:
Baud rate: 4800
Data bits: 8 (D7 = 0), parity none
Stop bits: 1
DO D1 D2 I D3 D4 D5 D6 D7
I
Stop
t3jt Data bits bit
24
2. Schematic Diagrams
FE-702 FE-701
Isolation: Optocoupler
Input Impedance: 560 ohms
Max. Voltage: ±15V
FE-702 FE-701
J1 J1 02P6281 I I 02P6280 l
B10B-XH-A P1 MJ-A10SRMD
TB1 J1 00-9072-230-901-883J J3
236-41 OM1-10 XHP-10
MJ-A10SRMD 00-9072-230-101-883
1 >1> >1» «1< <1«1<
NAV OUT 1
FL3 FL3
' 14 Ilfi
TD1 A 7
TD1_B 8
•i
FL4
v
TD1_A 6
TD1_B 7
NAV OUT 3
10
25
3. Sentence Description
DPT - Depth
$-DPT,x.x,x.x,x.x*hh<CR><LF>
I I I I
| | | +—4
j1 1 f+
| 7 O
I + _ 9
I *•
+ "I
$~DBS,x.x,f,x.x,M,x.x,F*hh<CR><LF>
N I M M
I I I | | | + A
i i i i +..+
I I I I I I T
3 H
i i +„.) 2
+..+ 1
26
GLL - Geographic position - latitude/longitude
S-GLL.IIII.III.a.vvwv.wv.a.hhmmss.ss.A.a*hh<CR><LF>
l" l ' l l l l l l
I I I I I I I + 6
| | + + ... 2
+_.+ 1
1. Latitude, N/S
2. Longitude, E/W
3. UTC of position
4. Status: A=data valid, V=data invalid
5. Mode indicator(see note)
6. Checksum
The Mode indicator field supplements the Status field. The Status field shall be
set to V=invalid for all values of Operating Mode except for A=Autonomous and
D=Differential. The positioning system Mode indicator and Status field shall not
be null fields.
27
GGA - Global positioning system (GPS) fix data
$-GGA,hhmmss.ss,llll.lll,a,yyyyy.yyy,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx*hh<CR><LF>
I I l l l M l l l M l l
I I l l l l l l l l l l l +-- 11
I I l l l l l l l l l +l +-~ 10
I I l l l l l l l l l ------ 9
I I | l l l l l l -l- -l- __ _ R
II l l l l l l l "ö
+__+
1 . UTC of position
2. Latitude, N/S
3. Longitude, E/W
4. GPS quality indicator (see note)
5. Number of satllite in use,00-12, may be different from the number in view
6. Horizontal dilution of precision
7. Antenna altitude above/below mean sealevel, m
8. Geoidal separation, m
9. Age of differential GPS data
10. Differential reference station ID, 0000-1023
1 1 . Checksum
NOTE
0 = fix not available or invalid
1 = GPS SPS mode, fix valid
2 = differential GPS, SPS mode, fix valid
3 = GPS PPS mode, fix valid
4 = Real Time Kinetic. Satellite system used in RTK mode with fixed integers
5 = Float RTK. Satellite system used in RTK mode with floating fingers
6 = Estimated (dead reckoning) mode
7 = Manual input mode
8 = Simulator mode
The GPS quality indicator shall not be a null field.
28
RMA- Recommended minimum specific LORAN-C data
$--RMA,A,llll-lll.a,yyyyy.yy,a,x.x,x.x,x.x,x.x,x.x,a,a*hh<CR><LF>
The Mode indicator field supplements the Status field. The Status field
shall be set to V=invalid for all values of Operating Mode except for
A=Autonomous and D=Differential. The positioning system Mode indicator
and Status field shall not be null fields.
29
RMC - Recommended specific GPS/TRANSIT data
$~RMC,hhmmss.ss,A,llll.lll,a,yyyyy.yyy,a,x.x,x.x,xxxxxx,x.x,a,a*hh<CR><LF>
I I I I I I I I I I I I I
I I I I I I I I +-10
| M I I I I +—9
| | | | | +-+ 8
| | | | + 7
| | | + 6
3
2
The Mode indicator field supplements the Status field. The Status field
shall be set to V=invalid for all values of Operating Mode except for
A=Autonomous and D=Differential. The positioning system Mode indicator
and Status field shall not be null fields.
30
VTG- Course over ground and ground speed
$-VTG.x.x.T.x.x.M.x.x.N.x.x.K.a*hh<CR><LF>
"" i i i i i i i
I I I I I I+ 6
I I I I I + 5
| , | | +..+ 4
| | +_+ 3
+..+ 2
+..+ 1
The positioning system Mode indicator field shall not be a null field.
$-ZDA,hhmmss.ss,xx,xx,xxxx,xx,xx*hh<CR><LF>
I I I I I I I
I I I I I I+ 7
| | | | | + 6
| | | + : 4
i + 3
i + 2
1. UTC
2. Day, 01 to 31 (UTC)
3. Month, 01 to12(UTC)
4. Year(UTC)
5. Local zone hours, OOh to +-13h
6. Local zone minutes, 00 to +59
as local hours
7. Checksum
31
9 PARTS LOCATION, PARTS LIST
INTERFACE
CON 02P6283
TB5
TB6 TB1 TB2 TB3 TB4
32
FURUNO Model FE-700
unit" DISPLAY UNirFE=701 "
DISTRIBUTION BOX FE-702
ELECTRICAL PARTS LIST Ref.Dwg. Page
Jan-99 Blk.No.
SYMBOL TYPE CODE No. REMARKS SHIPPABLE
ASSEMBLY
PANEL ASSEMBLY
FE-701 001-229-370 W/PAL02P6250
COVER
FE-701 001-229-340
POWER ASSEMBLY
FE-702 001-228-980
TRANSFORMER
T1 02S1256-0 000-142-779 FE-702
SWITCH
S1 M-2032L/B 000-474-351 FE-702
FILTER
FL1 ZCB2203-11 000-128-847 FE-702
FUSE HOLDER
FX1 FH043A 000-138-885 FE-702
FX2 FH043A 000-138-885 FE-702
TERMINAL BOARD
TB6 ML250S1AXF-3P 00-142-535 FE-702
TB7 ML250S1AXF-3P 00-142-535 FE-702
JACK
J1 MJ-A10SRMD 000-126-663
FUSE
F1 FGMB1A250V 000-142-771
F2 FGMB1A250V 000-142-771
33
;fi
CO
© FURUNO ELECTRIC CO., LTD. Your Local Agent/Dealer
9-52 Ashihara-cho,
Nishinomiya, Japan
Telephone: 0798-65-2111
Telefax: 0798-65-4200
D AM I ) FE-700
*00080890802*
*OME23660LOO*