Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Overview
Tunnelblick is an open source graphic user interface for SSL VPN on Mac OS X. It comes as a ready-
to-use application with all necessary binaries and drivers. It does not require any additional
installation. You just need to add the VPN tunnel configuration and encryption information.
Tunnelblick Client can be used to establish SSL VPN connection between Mac OS and Cyberoam.
Scenario
Configure SSL VPN for Mac OS X using Tunnelblick VPN client.
Configuration
You can configure SSL VPN for Mac OS X using Tunnelblick VPN client by following the steps below.
Configuration is to be done in Cyberoam and Mac OS using Administrator profile.
Access Cyberoam SSL VPN Portal using the URL - https://<WAN IP address of
Cyberoam:port> and login to the Portal.
Click Download SSL VPN Client Configuration to download the client configuration and save it in
your system.
A compressed file called ClientBundle.tgz is downloaded and saved at your mentioned location.
Step 4: Extract ClientBundle.tgz to Tunnelblick’s Configurations folder
Extract ClientBundle.tgz to Tunnelblick’s Configurations folder in your Mac system. The following files
will be added to the folder as shown below.
- UserPrivateKey.key
- UserCertificate.pem
- RootCertificate.pem
- Client.crssl
Parameter Value
ca RootCertificate.pem
cert UserCertificate.pem
key UserPrivateKey.key
Step 5: Establish SSL VPN Connection with Cyberoam
Launch Tunnelblick Client and login to establish an SSL VPN connection with Cyberoam at remote
site.
The above configuration applies Cyberoam SSL VPN Client Configuration to Tunnelblick client in Mac
OS X and establishes an SSL VPN connection with Cyberoam at a remote site.