Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ABSTRACT
The Controlled Behavior Composite Material technology for the time life of the structure, especially
(CBCM) is a thermal dynamic compound, which has when the rigidity of the composite structure is high,
been developed for morphing applications. The because to deform the structure the actuator has to
thermal establishment is completed by a resource of fight against this
is rigidity. For composite structures,
heating generated within the composite formation. the bimetallic strip effect can be obtained by coupling
The combination between the induced thermal field an internal heat source with an unsymmetrical
and the thermo mechanical properties of the variety of laminate. The particular behavior of the SMA
components of the composite
osite formation leads to the actuators inserted in the composite or fixed on the
transform of the formation shape. The temperature composite surface, leads to two techniques of
basis is generated by Joule result, Carbon yarns vibration control which lead to a frequency shift for
inserted in the composite, are connected to a power different eigenvalue. A CBCM combines these two
supply. The application field of CBCM knowledge is actions, stress field increase and change for the
the domain of shape modification ication and active behavior of the matrix, especially a loss of stiffness
assembly. The objective of this work is to illustrate during heating. In a first par for two kinds of
the capabilities of CBCM in the domain of vibration boundary condition, free/free and
control. We will learn some reference plates with embedded/embedded and for two CBCM, the
special constitution. The influences of these special influence of the plate rigidity on their dynamical
constitutions, of the CBCM cause and the failure of response will be studied: for non activated and
stiffness for the matrix will be highlighted, for two activated plates. An embedded/embedded boundary
boundary conditions, free/free and condition will be use and from the experimental date,
embedded/embedded. the shape of the two first modes will be reconstructed.
REFERENCES
1. G. V. Kumar, S. Raja, K. B. Prasanna and V.
Sudha, “Finite Element Analysis and Vibration
Control of a Deep Composite Cylindrical Shell
Dynamic response,, SYM plate, embedded/embedded, Using MFC Actuators,” Smart Materials
at 20˚C and 100˚C Research, Vol. 2012, 2012, Article ID: 513271.
2. K. Yuse and Y. Kikushima, “Development and an
CONCLUSIONS
Experimental Consideration of SMA/CFRP
This result has been also observed for inserted SMA,
Actuator for Vibration Control,” Sensors and
for their temperature of activation. The loss of rigidity
Actuators A, Vol. 122, No. 1, 2005, pp. 99-107.
99
of the matrix is accompanied by an increase in its
doi:10.1016/j.sna.2005.03.057
viscous properties.
3. D. M. Elzey, A. Y. N. Sofla and H. N. G. Wadley
A Shape Memory-Based
Based Multifunctional
Structural
ral Actuator Panel,” International Journal
of solids and Structures, Vol. 42, No. 7, 2005, pp.
1943-1955.