Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Overheat Protection
Class E (120 ), UL approval motor class A (105 )
Device
Ambient
-10 ~ 50
Temperature
Ambient Humidity 85% maximum (non condensing)
75
INDUCTION MOTORS GEARHEADS
DIMENSIONS
DIMENSIONS
DIMENSION TABLE
PART No. L APPLICATION MODEL MOUNTING BOLT
Red Red Model Speed(rpm) 500 416 300 250 200 166 120 100 83 60 50 41 30 25 20 16 15 125 10 8.3
Motor/
White White Gearhead Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
SPECIFICATIONS
1.73 2.07 2.88 3.45 4.31 5.18 6.47 7.76 9.32 11.65 13.97 16.77 20 20 20 20 20 20 20 20
The direction of motor rotation is as viewed from the front shaft end of the motor
17.3 20.7 28.8 34.5 43.1 51.8 64.7 77.6 93.2 116.5 139.7 167.7 200 200 200 200 200 200 200 200
Output Voltage Frequency Current Starting Rated Speed
Torque Torque Condenser 1.65 1.98 2.75 3.30 4.13 4.96 6.20 7.44 8.92 11.15 13.38 16.06 20 20 20 20 20 20 20 20
Model (mN m) (mN m)
(W) (V) (Hz) (A) (rpm) ( ) 16.5 19.8 27.5 33.0 41.3 49.6 62.0 74.4 89.2 111.5 133.8 160.6 200 200 200 200 200 200 200 200
(gfcm) (gfcm)
K9IP90FU-T 110 500 570 60Hz unit=above : N m / below : kgfcm
single-phase 90 60 2.00 1600 20
K9IS90FU-T 115 5000 5700 Model Speed(rpm) 600 500 360 300 240 200 144 120 100 72 60 50 36 30 24 20 18 15 12 10
500 570 Motor/
220 60 0.90 5000 5700 1600 Ratio 3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180
Gearhead
K9IP90FC-T 550 710
single-phase 90 50 1.05 5500 7100 1300 6 1.39 1.66 2.31 2.77 3.46 4.16 5.19 6.23 7.48 9.35 11.22 13.46 18.70 20 20 20 20 20 20 20
K9IS90FC-T 230
60 600 570 13.9 16.6 23.1 27.7 34.6 41.6 51.9 62.3 74.8 93.5 112.2 134.6 187.0 200 200 200 200 200 200 200
1.00 6000 5700 1600
1600 550 1.34 1.60 2.23 2.67 3.34 4.01 5.57 6.68 8.02 10.02 12.03 14.43 18.04 20 20 20 20 20 20 20
220 60 0.68 16000 5500 1600
K9IP90FH-T 13.4 16.0 22.3 26.7 33.4 40.1 55.7 66.8 80.2 100.2 120.3 144.3 180.4 200 200 200 200 200 200 200
three-phase 90 2050 680 1350 -
50 0.85 20500 6800
K9IS90FH-T 230 Gearhead and decimal gearhead are sold separately. The code in of gearhead model is for gear ratio.
1600 550
60 0.71 16000 5500 1600 color indicates that the output shaft of the geared motor rotates in the same direction as the output shaft of the motor. Others indicate rotation in the opposite direction.
If you are to have less ratio than the ratio in the table, you can install the decimal gearhead, which has one tenth of the ratio, between the gearhead and the motor. In this case,
the permissible torque is 20N m/200kgfcm.
86 87