Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TM
2 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
Montreal, Canada Lyon, France Ansan City, South Korea Granby, Canada
Velan Inc., Plant 1 Velan S.A.S. Velan Ltd., Plant 1 VelCAN
Montreal, Canada Mennecy, France Ansan City, South Korea Benicia, CA, U.S.A.
Velan Inc., Plant 2 and 7 Segault S.A. Velan Ltd., Plant 2 VelCAL
Granby, Canada Leicester, UK Ansan City, South Korea Marietta, GA, U.S.A.
Velan Inc., Plant 4 and 6 Velan Valves Ltd. Velan Ltd., Plant 3 VelEAST
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 3
POWER GENERATION
4 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
Hydrocarbon vapors at 900ºF (480ºC). Over 1500 similar large ball valves up to 36” (900 mm)
have been installed in Coker and other Petroleum
processes in 138 countries around the world.
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 5
A Complete Line
For Pulp & Paper
Batch Digester Capping
Batch Digester Blow
Continuous Blow
Flow Control
Liquor Heater Isolation
Remote Isolation
Gas Off
White Liquor
Black Liquor
Green Liquor
Lime Mud
Two Velan 8” (200 mm) liquor heater isolation valves. Velan 8” (200 mm) continous
Steam Shake-up blow flow control valve.
6 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
Autoclaves
Vessel Feed & Discharge
Acid Injection
Gas Injection
Steam Injection
Mineral Concentrators
Thickener Underflow
Block Valves
Filter Press Manifold Valves
Slurry Transfer Systems
PRV Isolation Valves 6” (150mm) Class 900 Titanium Securaseal® Ball 3” (80 mm) Class 900 Titanium autoclave
Valve on high pressure leach slurry service. vent valve.
OTHER APPLICATIONS
Chemical Processes Phosgene Gas
Acetic Acid with Abrasives
Ammonia Gas (Hot) Polycarbinate Flake
Calcium Hydroxide Plastic Granules
(Powered) Polymers 12” (300 mm)
Cobalt Oxide Polyester Polymers Class 600 Titanium
autoclave discharge
Dowtherm Heat Polyethylene isolation valve.
Transfer Oil Potassium Hydroxide
Epoxy Crystal Slurry Rubber (Fluidized)
Iron Pellets Silica (Powdered)
Lead (Molten) Sodium (Molten)
Limestone (Powdered) Coffee Decaf. Service
Lithium (Molten) Coffee Percolator
Methyl Chloride and Service
Powdered Silica Acid Service
Naptha and Hydrogen (Acetoc Anhydride)
Nickel Reduction Nicotine Removal
Nitrogen Gas from Tobacco
10” (250 mm)
Class 600
F55 inlet valve.
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 7
TYPE T
The Ultimate In-Line Repairable Top-Entry Metal-Seated Ball Valve
DESIGN FEATURES:
l Permits in-line access for seat replacement. l Oval handles and extension handles available.
l Can be welded into line without disassembly. l Tightness rates: Allowable leakage rate at full
Consult IOM manual for details. ∆P: ASME/FCI 70-2 Class V. Tighter shutoff
l Full port reduces risk of clogging in slurries and available upon request.
solids applications. APPLICATIONS:
l Body-cover joint not affected by pipe stresses. The Velan Top-Entry Metal-Seated Ball Valve is one of
l High sealing integrity of body-cover joint the most universally used valves on the market today.
due to fully-enclosed spiral-wound stainless steel As a standard design it is ideally suited for manual,
graphite gasket design. automatic and throttling control for a wide range of
applications for pressure up to 1,480 psig (102 bar)
l Solid Stellite 6 seats with large seating faces.
and temperatures up to 1,000°F (538°C) depending
l Backup seal: Graphite to 1,000°F (538°C). upon size, metallurgy and end connections.
l Operation automatically wipes ball clean.
Typical Applications:
l Wall thickness complies with ASME B16.34.
l FCCU catalyst oil slurries l Cryogenics
l Stainless steel ball, hard chrome plated. in oil refineries l PIA and PTA in
l Stainless steel blowout-proof stem. l FCCU catalyst chemical processing
l Hot hydrocarbons l Gas off, steam blow
l Low emission stem seal.
and resids back, instrument
l Live-loaded two-piece flanged gland. isolation in pulp &
l LDPE and HDPE catalyst
l Fully-guided stem reduces side thrust effect paper
l Saturated and super-
- no wobbling. l General purpose
heated steam
water, oil and gas
l Heavy stainless handle for manual operation. l Thermal fluids
applications
Up to 2” (50 mm) for regular port. l VCM
8 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
IN-LINE SERVICE
STEP 1
Remove cover assembly
STEP 2
Remove ball
Turn ball 90˚ and remove
STEP 3
Remove seats
Once ball is out, a simple jolt
with fingers or tool removes seat
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 9
⁄4 4.62 4.70 7.00 2.31 0.56 0.75 3.88 6 ⁄4 6.00 4.70 7.00 3.00 0.56 0.75 4.62 8 ⁄2 6.50 4.70 7.00 3.25 0.50 3.75 5
3 3 1
20 117 119 178 59 14 19 99 3 20 152 119 178 76 14 19 117 4 15 165 119 178 83 13 95 2
1 5.00 5.70 8.50 2.50 0.81 1.00 4.25 10 1 6.50 5.70 8.50 3.25 0.81 1.00 4.88 13 ⁄4 7.50 5.70 8.50 3.75 0.75 4.62 10
3
25 127 145 216 64 21 25 108 4 25 165 145 216 83 21 25 124 6 20 191 145 216 95 19 117 5
11⁄2 6.50 6.90 10.50 3.25 1.19 1.50 5.00 19 11⁄2 7.50 6.90 10.50 3.75 1.19 1.50 6.12 24 1 8.50 6.90 10.50 4.25 1.00 4.88 25
40 165 175 267 83 30 38 127 9 40 191 175 267 95 30 38 155 11 25 216 175 267 108 25 124 11
2 7.00 7.16 10.50 3.50 1.50 2.00 6.00 28 2 8.50 7.16 10.50 4.25 1.50 2.00 6.50 33 11⁄2 9.50 7.16 10.50 4.75 1.50 6.12 35
50 178 182 267 89 38 51 152 13 50 216 182 267 108 38 51 165 15 40 241 182 267 121 38 155 16
21⁄2 10.50 6.45 11.91 5.75 2.00 2.50 6.50 45 3 11.12 6.45 11.91 5.56 2.00 3.00 8.25 62 2(1) 11.50 6.45 11.91 5.75 2.00 6.50 37
65 267 164 303 146 51 64 165 20 80 282 164 303 141 51 76 210 28 50 292 164 303 146 51 165 17
3 8.00 6.45 11.91 4.00 2.00 3.00 7.50 55 4 12.00 11.41 19.88 6.00 3.00 4.00 10.00 123
80 203 164 303 102 51 76 191 25 100 305 290 505 152 76 102 254 56 C
4 9.00 11.41 19.88 4.50 3.00 4.00 9.00 109 6 15.88 11.95 25.88 7.94 4.00 6.00 12.50 275
100 229 290 505 114 76 102 229 49 150 403 304 657 202 102 152 318 125
6 15.50 11.95 25.88 7.75 4.00 6.00 11.00 230
150 394 304 657 197 102 152 279 104 SIZE CLASS 300 FULL PORT WEIGHT
in lb B
mm A B C D E G
kg
SIZE CLASS 150 FULL PORT WEIGHT
in
mm lb 3(4) 11.12 9.13 19.88 5.56 3.00 8.25 111
A B C D E G kg
80 282 232 505 141 76 210 50
F(3) E G
3(4) 13.50 9.13 19.88 6.75 3.00 7.50 102 4 18.00 11.95 25.88 9.00 4.00 10.00 240
80 343 232 505 171 76 191 46 100 457 304 657 229 102 254 109
4 17.00 11.95 25.88 8.50 4.00 9.00 220 6 22.00 13.75 n/a 11.00 6.00 12.50 517
100 432 304 657 216 102 229 100 150 559 349 279 152 318 235
6 21.50 13.75 n/a 10.75 6.00 11.00 474 D
150 546 349 273 152 279 215
A
(1) See footnotes 1 & 2 on page 11. (3) For Full Port F = E.
(2) For larger sizes, consult the factory. (4) Body is with welded on flanges and threaded holes.
10 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
100,000
6" FP
3" 50
Pressure-psid
FP
Pressure-bar
, 3
Pressure-bar
600 46"–RP
6" FP,
/4 – 4"
RP 40 600 4 – 6" FP, 6" RP 1
40
/2 –
1– 3
/4"
400 30 400 6" F
P, 1 1
FP, 3 30
/4 –
/2 – 1" R
20 6" R P 20
P
200 200
with 10 with 10
Graphite seals Graphite seals
0 0 0 0
0 100 200 300 400 500 600 700 800 900 1000 F 0 100 200 300 400 500 600 700 800 F
0 50 100 150 200 250 300 350 400 450 500 C 0 50 100 150 200 250 300 350 400 C
Temperature Temperature
(1) Body rating is per B16.34 pressure/temperature ratings, except for 2” (50 mm) full port and 3” (80 mm)
regular port, which are limited to 1200 psi (82.7 bar) at 100ºF (38ºC), 3” (80 mm) and larger full port and
4” (100 mm) and larger regular port are rated Class 300 only. Shutoff pressure for valves is limited to the
differential pressures as shown in the graphs .
(2) For full B16.34 ratings and/or shutoff against full B16.34 differential pressures consult the factory.
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 11
Cast Split-Body
Flanged Metal-Seated Ball Valves
DESIGN FEATURES:
l Off-center split-body design allows the use of
STANDARD advanced spiral-wound gaskets.
LIVE-LOADED
l Maximum temperature for CF8M 1,000°F (538°C),
PACKING for WCB 800°F (426°C).
ASSEMBLY l Full port ensures large capacity and reduces the
risk of clogging when handling solids or slurries.
l Wall thickness complies with ASME B16.34 and BS
5351 for 2–12” ASME 150 and 300 full port only.
l Stem bearing reduces side thrust effect on
packing and prevents stem wobbling.
“M SEAT” Shown l Integral seat locking option does not require
additional parts or special tools.
l Scraper seats standard.
l Ball and seats lapped for optimum performance
and tight shutoff.
l Low emission stem seal.
l Blowout-proof stem.
l Two-piece flanged gland. Live-loaded as standard.
l All valves with graphite packing and backup seal
are inherently fire safe.
l Can be used for manual throttling applications.
(For automation contact Velan Engineering.)
l Manual operation with handle for 2–4”
(50 –100 mm) FP and 3–6” (80–150 mm) RP.
6” (150 mm) FP, 8” (200 mm) RP and larger
require gear or actuator. Gear or pneumatic
actuator available.
l Tightness rates: Allowable leakage rate at full
∆P: ASME/FCI 70-2 Class V.
Tighter shutoff available upon request.
l Oversized ball to stem connection provides:
- No deformation of the stem slot in the ball.
- Better throttling control performance.
- Less motion loss and wear in automatic on-off
applications.
12 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
Preferred
TYPE “S” SEAT Direction
Description: Scraper with TYPE “M” SEAT
bi-directional shutoff Description: Spring-loaded bi-directional sealing
Material: SS 316 hardfaced with Stellite 6 Material: SS 316 hardfaced with Stellite 6
Seal: PTFE Seal: Graphite and Inconel load ring
Temperature: -50°F to 450°F (-45 C to 232°C) Temperature: -320°F to 1000°F (-195°C to 538°C)
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 13
Pressure-psid
200
Pressure-bar
16–18" FP, 20–24" RP
separately. Also high quality
150
circular spiral-wound gaskets 10
Pressure-bar
15
l Stem thrust washer prevents flange, provide
Pressure-psid
200
16 –18" FP, 20–24" RP 2–14" FP, 3–18" RP
galling, reduces torque and live-loading on 150 10
provides a secondary stem seal. packing rings.
100
20–24" FP only
5
50
0 0
FLOW 0 100 200 300 400 500 600 700 800 F
Cv
SIZE
FP SB-300/600(4), A 351 Gr. CF8M
in RP Maximum allowable differential pressure
800
430 Limit for Limit for
2 NA 700 PTFE STD construction 50
600
1,020 40
3
Pressure-bar
Pressure-psid
250 500
2–12" FP, 3–16" RP
400 30
2,000
4 540 300 14" FP, 18" RP
20
5,500 200
6 770 100
16 –18" FP, 20–24" RP 10
20–24" FP only
9,800 0 0
8 0 100 200 300 400 500 600 700 800 900 1000 F
1,900
0 50 100 150 200 250 300 350 400 450 500 C
16,400 Temperature
10 3,900
23,800 SB-300/600(4), A 216 Gr. WCB
12 6,700 Maximum allowable differential pressure
800
27,500 Limit for
14 5,200 700 PTFE 50
16
Pressure-bar
8,050 500
400 30
45,000 14" FP, 18" RP
18 12,500 300
20
200
58,000 16 –18" FP, 20–24" RP
20 15,500 100 10
20–24" FP only
0 0
84,000 0 100 200 300 400 500 600 700 800 F
24 27,000
0 50 100 150 200 250 300 350 400 C
Temperature
(3) Body ratings conform to ASME B16.34.
(4) For ASME 600 consult the factory.
14 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 15
TYPE R
High Pressure Forged
Metal-Seated Ball Valves
DESIGN FEATURES:
l Bi-directional sealing with preferred direction
as shown ( ).
l Advanced HVOF or Plasma Spray
custom trim coating technology
with hardness in excess of 70 RC.
l Superior ball/seat finish to 2–4 RMS.
l Unique ball/seat spring-loading technology to
assure tight shutoff at low differential pressures
and / or when fines are present.
l Complete ball/seat set individually vacuum
tested to verify sealing integrity.
SEATING
l Robust blowout-proof stem.
l Low emission stem seal with advanced
live-loaded packing arrangement.
l Stem bearing reduces side thrust effect on
packing and prevents stem wobbling.
l Stellited thrust washers absorb stem loading
moments and reduce valve operational torque.
l Allowable leakage at full ∆P: MSS-SP-61.
DOWNSTREAM SEAT UPSTREAM SEAT Tighter shutoff available upon request.
l Unique “Flat Washer” load ring arrangement l All valves are inherently fire safe.
ensures necessary contact sealing/seating force
for tight shutoff and smooth operation under all l Designed to ASME B16.34.
conditions. l Flow relief is incorporated into both the upstream
and downstream ball lips increasing the area
STEM & THRUST WASHER exposed to flow and thus reducing erosion
due to velocity upon initial valve opening.
l Downstream and upstream body-seat
l Fully guided stem.
lapped contact.
l Live-loaded packing gland.
l Internal thrust washer
prevents galling, reduces
torque, and provides
secondary stem seal.
16 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
ACTUATOR OPTION
PART MATERIAL 30
28 Key Commercial CS 28
29 Adapter plate Commercial CS 27
35
30 Coupling SS 410 Cond.2 29 40
33 31
LEVER OPTION
34
PART MATERIAL 6
31 Lock nut SS 304
32 Nut Commercial CS 19 37
26 32
33 Socket head A574 Alloy Steel 39
cap screw
21
34 Lock clip SS 302 27
18 36
35 Lever Commercial CS
c/w Black Oxyde 24
15 19 6
36 Adapter plate CS c/w Aluminum 26
(lever) High Temperature Paint 22
9
37 Stopper plate SS 302 7
38 Lock washers Commercial Zinc Plated 10
12
39 Thrust washer Commercial Alloy Steel 14 17
11
40 Plastic cover Plastic 12
38 19
(1) Alt: SS 660 5 21
(2) PH=Precipitation Hardened
(3) CC=Chrome Carbide Coated 23 25 LEVER OPTION
(4) Alt: A105 c/w Aluminum
High Temperature Paint 1
3
4
8 ACTUATOR OPTION
20
13
2
16
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 17
1,000
3/4"
B 1" 11/2"
1/2" 3/4" 1"
100
E F 0 500 1000 1500 2000 2500 3000 3500 4000
Differential pressure-psi
CLASS 2500
A 1/2" to 24" Full Port & 3/4" to 24" Regular Port
10,000,000
FLOW COEFFICIENT Cv ISO MOUNTING 24"
FULL PORT REGULAR PORT ISO FLANGE 18" 20"
SIZE SIZE 16" 18"
in 900 1500 2500 900 1500 2500 in 900 1500 2500 1,000,000
14" 16"
12" 14"
1⁄2 14 14 9 – – – 1⁄2 F05 F05 F05 10" 12"
8" 10"
3⁄4 31 31 16 19 19 – 3⁄4 F05 F05 F05
Torque values - lb. in
18 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
SPECIAL APPLICATIONS
TYPE N
Severe Service Forged
Metal-Seated Ball Valves
TIGHT SHUTOFF TO ASME/FCI 70-2 CLASS VI,
EXTERNAL
MSS-SP61 OR API 598
DOWNSTREAM
SEAT THRUST The Securaseal Type N was designed and developed
Up To 6” (150 mm)
BEARING for the most severe services heavy industry has
to offer. None are more severe than high pressure
leaching by acid or oxygen used in the refining of
nickel and gold ores. These services push every
piece of equipment to the absolute limit requiring
not only a sound and very robust design but also
one that is on the cutting edge of technology.
DESIGN FEATURES:
l Bi-directional sealing with preferred direction as
shown ( ).
l Oversized blowout-proof stem.
l Internal stem bushings absorb stem loading
moments and provide guiding.
SEATING l External thrust bearing significantly reduces
valve operation torque.
l Heavy duty precision machined actuator bracket
ensures accurate stem alignment.
l Advanced live-loaded stem packing arrangement
standard.
l Unique ball/seat spring-loading technology.
l Complete ball/seat set individually vacuum
tested to verify sealing integrity.
DOWNSTREAM SEAT UPSTREAM SEAT
Above 6” (150 mm) l Advanced HVOF or Plasma Spray custom trim
coating technology with hardness in excess
STEM & THRUST WASHER of 70 RC.
l Superior ball/seat finish to 2–4 RMS.
l Fully guided stem,
l Seat shroud eliminates particle migration into
live-loaded packing
gland and external seat recess.
thrust washer combine l Locked-in downstream seat.
to prevent galling and l Self energized body seal allows for services
reduce torque. requiring exotic materials or where severe pipe
loads and/or thermal cycling is a concern.
l Designed to ASME B16.34.
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 19
20 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
40
42
41
26 32 36
34
18 35
21
31 38
29
27 33 18
17
37
22 24
8 5 20
9 40
11 14 42
10
11
25
23 26
13 16
3 1
19* 21
28 27
4
39
6
2
18
12
15
DIMENSIONS
SIZE
ASME 150 ASME 300 ASME 600 ASME 900 ASME 1500 ASME 2500
FULL PORT FULL PORT FULL PORT FULL PORT FULL PORT FULL PORT
in
mm A(1) E F A(1) E F A(1) E F A(1) E F A(1) E F A(1) E F
1⁄2 4.25 0.50 3.50 5.50 0.50 3.75 6.50 0.50 3.75 8.50 0.50 4.75 8.50 0.50 4.75 10.38 0.44 5.25
15 108 13 89 140 13 95 165 13 95 216 13 121 216 13 121 264 11 133
3⁄4 4.62 0.75 3.88 6.00 0.75 4.62 7.50 0.75 4.62 9.00 0.69 5.12 9.00 0.69 5.12 10.75 0.56 5.50
20 117 19 99 152 19 117 191 19 117 229 18 130 229 18 130 273 14 140
1 5.00 1.00 4.25 6.50 1.00 4.88 8.50 1.00 4.88 10.00 0.87 5.88 10.00 0.87 5.88 12.13 0.75 6.25
25 127 25 108 165 25 124 216 25 124 254 22 149 254 22 149 308 19 159
11⁄2 6.50 1.50 5.00 7.50 1.50 6.12 9.50 1.50 6.12 12.00 1.37 7.00 12.00 1.37 7.00 15.13 1.12 8.00 E F
40 165 38 127 191 38 155 241 38 155 305 35 178 305 35 178 384 28 203
2 7.00 2.00 6.00 8.50 2.00 6.50 11.50 2.00 6.50 14.50 1.87 8.50 14.50 1.87 8.50 17.75 1.50 9.25
50 178 51 152 216 51 165 292 51 165 368 47 216 368 47 216 451 38 235
21⁄2 7.50 2.50 7.00 9.50 2.50 7.50 13.00 2.50 7.50 16.50 2.25 9.62 16.50 2.25 9.62 20.00 1.87 10.50 A
65 191 64 178 241 64 191 330 64 191 419 57 244 419 57 244 508 47 267
3 8.00 3.00 7.50 11.12 3.00 8.25 14.00 3.00 8.25 15.00 2.87 9.50 18.50 2.75 10.50 22.75 2.25 12.00
80 203 76 191 282 76 210 356 76 210 381 73 241 470 70 267 578 57 305
4 9.00 4.00 9.00 12.00 4.00 10.00 17.00 4.00 10.75 18.00 3.87 11.50 21.50 3.62 12.25 26.50 2.87 14.00 CONTACT VELAN
100 229 102 229 305 102 254 432 102 273 457 98 292 546 92 311 673 73 356 ENGINEERING
6 15.50 6.00 11.00 15.88 6.00 12.50 22.00 6.00 14.00 24.00 5.75 15.00 27.75 5.37 15.50 36.00 4.37 19.00 DEPARTMENT FOR
150 394 152 279 403 152 318 559 152 356 610 146 381 705 136 394 914 111 483
8 18.00 8.00 13.50 19.75 8.00 15.00 26.00 7.88 16.50 29.00 7.50 18.50 32.75 7.00 19.00 40.25 5.75 21.75 SIZES ABOVE 12”,
200 457 203 343 502 203 381 660 200 419 737 191 470 832 178 483 1022 146 552 CVs, TORQUE VALUES,
10 21.00 10.00 16.00 22.38 10.00 17.50 31.00 9.75 20.00 33.00 9.37 21.50 39.00 8.75 23.00 50.00 7.25 26.50 WEIGHTS AND ALL
250 533 254 406 568 254 445 787 248 508 838 238 546 991 222 584 1270 184 673 OTHER DETAILS.
12 24.00 12.00 19.00 25.50 12.00 20.50 33.00 11.75 22.00 38.00 11.12 24.00 44.50 10.37 26.50 56.00 8.62 30.00
300 610 305 483 648 305 521 838 298 559 965 282 610 1130 263 673 1422 219 762
For butt weld or socket weld end-to-end dimensions consult the factory.
(1) Flange configuration may be different than shown above.
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 21
SPECIAL APPLICATIONS
TYPE L
High-Temperature
Metal-Seated Ball Valves
The Velan Type L High-Temperature Metal-Seated
Ball Valve is well suited for a variety of demanding
services where high-temperature and abrasive
solids are present.
DESIGN FEATURES:
l Unique, single-seat ball valve design. The Velan
single-seat ball valve has a flat spring set acting
through a hardfaced bearing against the bottom
ball shaft which provides sufficient initial ball-seat
load for valve tightness, even at low ∆P.
l The design provides freedom for thermal
expansion of the ball without jamming, even at
extreme temperatures.
l Proven in qualification tests and field operation
to be solids–proof, even for the toughest
applications on slurry service with solids.
l Tightness rates: Allowable leakage rate at full
Sealing ∆P: ASME/ FCI 70-2 Class V. Tighter shutoff
Direction
available upon request.
l Max. operating temperature: CF8M valves:
BOTTOM TRUNNION DETAIL 1,450°F (788°C). WCB valves: 800°F (426°C).
Chrome Moly C5 or C12: 1,000°F (538°C).
Spring
plate set Bearing l Wall thickness complies with ASME B16.34.
APPLICATIONS:
l Petrochemical
l Oil refining
l Iron ore processing
l Filter skids
l Sulphur removal
Rest Trunnion
plate shaft
22 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
Pressure-bar
Pressure-psi
Body gasket Spiral-wound SS 316/Graphite
SB-300 4–8"
Packing ring Graphite 300 20
SB-300 10–24"
Packing flange A 105, A 182 Gr. F316, Chrome Moly C5 or C12 200
Gland bushing SS 304 10
100 SB-150 4–24"
Body stud A 193 Gr. B7, B8M Cl.2 or B16
Body nut A 194 Gr. 2H, 8M or 4 0 0
Gland stud A 193 Gr. B7, B8M Cl.2 or B16 0 200 400 600 800 1000 1200 1400 1600 F
Gland nut A 194 Gr. 2H, 8M or 4 0 100 200 300 400 500 600 700 800 C
Backup seal Graphite Temperature
Lock screw SS 304
(2) Body ratings conform to ASME B16.34.
Key (ball and stem) SS 316 For higher allowable differentials consult Velan.
Operator key CS
Lock washer SS 302
Spring plate set Inconel X-750
Holding pin SS 316 TORQUE CHART FULL PORT SB-150/300, 4–24”
Retainer sleeve SS 316 1,000,000
900,000
Rest plate SS 316 800,000
700,000 24"
Bearing SS 316 / Stellite 6 600,000
500,000
20"
(1) 4” stem SS 316, 6” and larger A 479 Gr. XM-19. 400,000
300,000 18"
DIMENSIONS AND WEIGHTS 200,000 16"
SIZE TOTAL SIZE TOTAL
SB-150 FULL PORT WEIGHT SB-300 FULL PORT WEIGHT 100,000
90,000
14"
in lb in lb 80,000
70,000
12"
mm A B C D E F kg mm A B C D E F kg 60,000
4 9.00 11.00 25.88 4.52 4.00 9.00 84 4 12.00 11.00 25.88 5.99 4.00 10.00 132
50,000 10"
40,000
8"
100 229 279 657 115 102 229 38 100 305 279 657 152 102 254 60
30,000
6 15.50 10.63 – 6.25 6.00 11.00 183 6 15.87 10.63 – 6.65 6.00 12.50 267 6"
Torque values – lb•in
150 394 270 – 158 152 279 83 150 403 270 – 169 152 318 121 20,000
8 18.00 15.28 – 8.13 8.00 13.50 336 8 19.75 15.28 – 8.78 8.00 15.00 533 10,000
9,000
200 457 388 – 206 203 343 153 200 502 388 – 223 203 381 242 8,000
7,000 4"
10 21.00 18.97 – 10.50 10.00 16.00 587 10 22.37 18.97 – 11.19 10.00 17.50 980 6,000
5,000
250 533 482 – 267 254 406 266 250 568 482 – 284 254 445 445
4,000
12 24.00 20.88 – 12.00 12.00 19.00 879 12 25.50 20.88 – 12.75 12.00 20.50 1595 3,000
300 610 530 – 305 305 483 399 300 648 530 – 324 305 521 723
2,000
14 27.00 25.22 – 13.50 13.25 21.00 1460 14 30.00 25.22 – 15.00 13.25 23.00 2346
350 686 641 – 343 337 533 662 350 762 641 – 381 337 584 1064 1,000
900
800
16 30.00 24.13 – 15.00 15.25 23.50 1540 16 33.00 24.13 – 16.50 15.25 25.50 3190 700
400 762 613 – 381 387 597 699 400 838 613 – 419 387 648 1447 600
500
18 34.00 27.28 – 17.00 17.25 25.00 2280 18 36.00 27.28 – 18.00 17.00 28.00 4313 400
450 864 693 – 432 438 635 1034 450 914 693 – 457 432 711 1956 300
20 36.00 29.69 – 18.00 19.25 27.50 2850 20 39.00 29.69 – 19.50 19.00 30.50 5846 200
500 914 754 – 457 489 699 1293 500 991 754 – 495 483 775 2652
100
24 42.00 39.62 – 21.00 23.25 32.00 3900 24 45.00 39.62 – 22.50 23.00 36.00 7037 0 100 200 300 400 500 600 700 800
600 1067 1006 – 533 591 813 1769 600 1143 1006 – 572 584 914 3192
Differential pressure – psi
C
FLOW COEFFICIENT Cv
SIZE Cv
in
4 2,000 B
6 5,500 B(3)
8 9,800
10 16,400
12 23,800 E F
14 27,500
16 35,600 (3) For valves 6” and
18 45,000 larger (bare stem).
20 58,000 D
24 84,000 A
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 23
SPECIAL APPLICATIONS
TYPE P
Severe Service Integral
Flow-Thru Jacketed Design
TIGHT SHUTOFF TO ASME/FCI 70-2 CLASS VI,
MSS-SP61 OR API 598
DESIGN FEATURES:
l Integral Flow-Thru Jacket Design.
(Multipassage 360º uniform heat transfer).
l The Securaseal Type P Valve is custom designed
to incorporate a flow passage internal to the
valve. The passageways are designed to be as
close to the process flow as possible.
High performance severe service valve design
based integrating many advanced features of
Securaseal Type N including:
l Bi-directional sealing with preferred direction
as shown ( ).
l Oversized blowout-proof stem.
l Heavy duty precision machined actuator bracket
ensures accurate stem alignment.
l Advanced live-loaded stem packing
arrangement standard.
l Unique ball/seat spring-loading technology.
l Complete ball/seat set individually vacuum
tested to verify sealing integrity.
l Advanced HVOF or Plasma Spray custom trim
TYPICAL APPLICATIONS: coating technology with hardness in excess
l Thermal jacketed polymer transfer lines. of 70 RC.
l Superior ball/seat finish to 2–4 RMS.
l Thermal jacketed solvent transfer lines.
l Seat shroud eliminates particle migration
l Process additives and by-product transfer lines.
into seat recess.
l HD/LD polymer slurry separation process.
24 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
ONE-PIECE FORGED METAL-SEATED The rugged, one-piece, forged Velan Power Ball
Valve, is built to take the toughest steam isolation
POWER BALL VALVE applications in your plant – vent, drain, blowoff,
1/2–4” (15–100 mm)
intermittent blowdown – with the performance and
ASME CLASSES 900-4500 reliability that you have come to expect from Velan.
DESIGN FEATURES:
l One-piece forged body.
l Streamlined flow path limits cavitation
and pressure drop.
l True quarter turn valve – low torque.
l Body cavity is isolated from solids build up,
flow and erosion resistance.
l Rugged fully guided one-piece stem.
l Foolproof stem blowout protection.
For more Power Ball l Chrome Carbide coated Inconel ball and seat.
Valve information see
our VEL-PBV catalog.
DESIGN FEATURES:
l No adjustment necessary,
all Velan capping valve parts
are easy to install.
l Easy in-place maintenance,
easy to take apart and reassemble,
even while on the digester.
l Simple design
For more CAP-TIGHT only moving parts are the ball
Valve information see and its assembled shaft.
our VEL-BDC brochure. l
Reversible ball and seat
lower maintenance costs.
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 25
Stellite
hardfaced
ring
Ball port
– Hot hydrocarbons
Hard 1,500°F
Plating VEL-PS-CP 66 Good Excellent – Fractionator bottoms
Chrome (816°C)
– Scaling calcium, carbonate
1,500°F
Stellite VEL-PS-CG 44 Good Excellent – Power applications (Clean)
(816°C)
– Steam / Water (contaminated)
Chrome 1,500°F – Catalyst withdrawal
VEL-PS-CB 60 –68 Good Excellent
Carbide (816°C) – Vacuum tower bottoms
HVOF – Fly ash
Tungsten Carbide 900°F – Moderate temperatures
VEL-PS-CJ 70 –72 Excellent Good
with Cobalt (482°C) hydrocarbons
Tungsten Carbide 900°F Excellent Good – Abrasive catalyst withdraw
VEL-PS-CH 70 –72
with Nickel (482°C) – High cycle polyethylene
1,000°F
Chrome Oxide VEL-PS-CF 75 Excellent Good
Plasma (538°C) – Corrosive slurries
Spray 1,500°F – Acidic slurries
Titanium Dioxide VEL-PS-CL 60 Good Excellent
(816°C)
26 Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved.
A B C D E F G H I J
— —
F 1 0
— 1 1 S 1 3
— B C 2 A
EXAMPLE: Flanged, 3”, Class 300, full port, Type S design, CF8M body, SS 316 Cr plated ball, Nitronic 50 stem, Stellite scraper seat
with PTFE Backup
The figure numbers shown on this key are designed to cover essential features of Velan valves.
Please use figure numbers to ensure prompt and accurate processing of your order.
A detailed description must accompany any special orders.
A TYPE OF CONNECTION F BODY MATERIAL
B - Butt weld H - Hub ends 02 - A105, WCB 15 - F347, CF8C 27 - LF3/LC3 40 - Titanium Gr. 2/3
C - Combination P - Flanged B16.47 series B (API 605) 03 - F1, WC1 16 - F304H 28 - F317, CG8M 41 - Titanium Gr. 7
D - DIN flanged R - Flanged ring joint 04 - F5, C5 18 - F321 29 - F317L, CG3M 42 - Titanium Gr. 12
E - Welded stubs S - Threaded 05 - F11, WC6 19 - Monel(1) 31 - LCC 43 - Titanium 45
F - Flanged B16.5 (B16.47 series A) W - Socket weld 06 - F22, WC9 20 - Inconel(1) 32 - F51 Niobium
09 - F9, C12 21 - Hastelloy C(1) 34 - F91, C12A 44 - Ferralium 255
B SIZE OF CONNECTION 10 - F316H/F316(2) 22 - Titanium Gr.5 35 - F44, 250 5MO 45 - F55
11 - F304, CF8 23 - Alloy 20 36 - F321H 46 - GS-C25N
Customers have the choice of specifying valve size as part of the 12 - SF304L, CF3 24 - LF1 37 - Incoloy(1)
valve figure number (B) using the numbers below, or indicating 13 - F316(2), CF8M 25 - LCB 38 - LC1
valve size separately. 14 - F316L, CF3M 26 - LF2 39 - LC2
EXAMPLES:
F10-11S13-BC2A (valve size is part of figure number) G TRIM MATERIAL (ball/seat)
3”F-11S13-BC2A (valve size is shown separately) A - 410 G - Inconel 625 N - Titanium Gr. 7 U - Alloy 20
B - 316 H - Nitronic 60 P - F51 V - Stellite
03 - 1⁄2” (15 mm) 09 - 21⁄2” (65 mm) 16 - 10” (250 mm) 22 - 20” (500 mm) C - CA6NM J - Ferralium 255 Q - F55 W - C5
04 - 3⁄4” (20 mm) 10 - 3” (80 mm) 18 - 12” (300 mm) 23 - 22” (550 mm) D - 416 K - Titanium Gr. 2/3 R - Carbon Y - C12
E - 630 (17-4PH) L - Titanium Gr. 5 S - Hastelloy C(1) Z - F91/C12A
05 - 1” (25 mm) 12 - 4” (100 mm) 19 - 14” (350 mm) 24 - 24” (600 mm)
F - Inconel 718 M - Titanium 45 Niobium T - Monel(1) X - Special
07 - 11⁄2” (40 mm) 14 - 6” (150 mm) 20 - 16” (400 mm)
08 - 2” (50 mm) 15 - 8” (200 mm) 21 - 18” (450 mm) H TRIM MATERIAL (stem)
A - 410 G - Inconel 625 N - Titanium Gr.7 U - Alloy 20
C
CLASS
B - 316 H - Nitronic 60 P - F51 Y - Monel K400
0 - 150 3 - 1500 7 - 900 C - Nitronic 50 J - Ferralium 255 Q - F55 Z - Monel K500
1 - 300 4 - 2500 G - TE-600 (Top-body threaded or socket weld) D - 347H K - Titanium Gr.2/3 R - 660 X - Special
2 - 600 5 - 4500 X - Special E - 630 (17-4PH) L - Titanium Gr.5 S - Hastelloy C
F - Inconel 718 M - Titanium 45 Niobium T - 616
D
PORT
0 - Regular port 4 - Full port, unidirectional I COATINGS
1 - Full port 5 - Full port, short pattern A - Uncoated P - Titanium Dioxide, Inconel 625 bond coat
2 - Special or reduced port 6 - Full port, trunnion spring load seat B - Chrome Carbide R - Titanium Dioxide, Titanium bond coat
3 - Regular, unidirectional C - Chrome Oxide, Titanium bond X - Chrome Oxide, Inconel 625 bond coat
D - Chrome Oxide, Tantalum bond 2 - Chrome plated ball/Stellite seat
E
TYPE E - Chrome Oxide, Nickel/Chrome bond 3 - Ni plated ball, Stellite seat
L - Split-body, single seat R - Split-body load ring F - Chrome Oxide, no bond coat 4 - Tungsten Carbide/Ni ball, Stellite seats
with trunnion and leaf spring (spiral-wound gasket) G - Stellite 5 - Tungsten Carbide/Co ball, Stellite seats
M - Split-body spring loaded S - Split-body metal seat PTFE seal H - Tungsten Carbide/Nickel 6 - Chrome carb. ball/Stellite seat
seat graphite seal T - Top-entry, seat type T J - Tungsten Carbide/Cobalt 9 - Special
N - Split-body with load ring (graphite seal Classes 150, 300 & 600) L - Titanium Dioxide, no bond coat
and body seal W - Split-body metal seat graphite seal M - Titanium Dioxide, Tantalum bond NOTE: seat and ball same unless noted.
P - Split-body flow-thru X - Split-body (solids proof) metal seat N - Chrome Oxide, graded Titanium bond
with load ring and body seal graphite seal
J SPECIAL SERVICE
(1) Must specify grade. A - Standard H - Cryogenic M - Mining X - Special
B - Block & bleed I - NACE sour gas N - Nuclear
(2) Material code “10” F316H/F316 has a minimum carbon content of 0.04
and is to be used if temperatures are over 1000°F (538°C). F - Cavity filler J - Steam jacket T - Bonnet,
Material code “13” forged F316, is not suitable for temperatures above 1000°F (538°C) G - Oxygen L - Locked scraper seat double packing
as it is dual certified (F316/F316L)
Velan reserves the right to change this information without notice. © 2015 Velan Inc. All rights reserved. 27
Headquartered in Montreal, Canada, Velan has several © 2015 Velan Inc., Montreal, QC, Canada. All rights reserved. The contents hereof are confidential and proprietary
to Velan. Any unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited. The material in this
international subsidiaries. For general inquiries: catalog is for general information only and shall not be used for specific performance data and material selection
without first consulting Velan. Velan reserves the right to change this information without notice. Velan does not
Velan head office accept any liability or damages arising from the use of information in this catalog. Velan Valves, Velan, Memoryseal,
7007 Côte de Liesse, Montreal, QC H4T 1G2 Canada Torqseal, Velflex, Adaxie, and RAMA are trademarks or registered trademarks of Velan Inc. and/or another Velan
company. Stellite® is a registered trademark of Kennametal Stellite™, a wholly owned subsidiary of Kennametal Inc.
Tel: +1 514 748 7743 Fax: +1 514 748 8635 All other trademarks and registered trademarks are owned by their respective companies.