Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Assembly panels
Based on an anodized extruded aluminum structure, these assembly panels offer various possibilities. From the basic
horizontal panel to the mobile table, we offer solutions adapted to various requirements.
The rolling table includes a panel which enables users to work on both sides at the same time. It also includes a support shelf
of drawers for components and the pneumatic compressor.
In any case, all the options are perfectly valid to carry out the practical activities proposed.
34
Industrial materials
All the components used are industrial.
Developed and manufactured by SMC
and popular throughout the world, they
meet the highest levels of quality. The
components are mounted on a
stainless steel base plate 4 mm thick.
In order to be identified correctly they
have a label with the corresponding
reference as well as standardized
symbols.
Connections
The pneumatic components include
fittings with instant connection for tube
4 mm thick. The electro-pneumatics
have instant connection cables.
Storage
The standard compositions include a
storage system in EUROBOX boxes
with thermoconforming trays which
allow perfect identification and storage
by occupying minimum space.
These boxes and trays can also be
purchased for the storage of
customized compositions.
PNEUTRAINER-200
35
PNEUTRAINER-200
Standard compositions
6 standard compositions have been defined to cover training demands at various levels of education. Each of the compositions
has been designed for the development of specific skills in the field of pneumatics and electro-pneumatics.
The specific content of each composition is described below. They can be extended with all the elements offered on the
following pages in order to pursue more advanced didactic objectives.
The compositions include the required theoretical and practical documentation, with the option of extending it with a series of
didactic supports adapted to PNEUTRAINER-200.
Skills developed:
- Identification and use of pneumatic symbology
- Air treatment concepts
- Function of the pneumatic elements
- Analysis of simple pneumatic circuits
- Maintenance of pneumatic circuits
- Design of simple pneumatic systems
36
SAI2281 PNEU-201: Basic pneumatics composition
Ref. Description Cantidad
Air treatment
SAI2091 Air cleaning unit with 3/2 distribution valve 1
SAI2092 Distribution block 1
SAI2005 Pressure regulator with pressure gauge 1
SAI2004 1MPa pressure gauge 1
Manual and mechanical operated valves
SAI2015 3/2 NC push- button operated valve 2
SAI2018 3/2 NC/NO push- button operated valve 1
SAI2019 3/2 NC emergency knob operated valve 1
SAI2013.1 3/2 NC roller lever operated valve 2
SAI2014.1 3/2 NC one way trip operated valve 1
SAI2016 3/2 NC switch operated double valve 1
SAI2021 5/2 selector operated valve 1
Air operated valves
SAI2020 3/2 NC air operated single valve 1
SAI2010 3/2 NC timer valve. Convertible 1
SAI2023 5/2 air operated single valve 1
SAI2024 5/2 air operated double valve 3
Flow control equipment
SAI2007 "OR" function 1
SAI2124 "OR" double valve 1
SAI2006 "AND" function 1
SAI2031 Single direction speed controller (double) 2
SAI2033 Quick exhaust valve 1
Actuators
SAI2027 Single acting cylinder 1
SAI2026 Double acting cylinder 2
Accesories
SAI2057 20+20m blue/ white flexible tube set (4mm.) 1
SAI2058 Set of 10 tee fittings 1
SAI2059 Set of 5 1/8" plugs 1
SAI2060 Set of 10 x 4 mm. plastic plugs 1
TK-3 Tube-cutter 1
SAI2076 Component- containing box 1
SAI2307 10m black flexible tube set (6 mm.) 1
TG-1 Tube extractor 1
Training supports
SAI2061 Documentation manual 1
SAI2070 CD-Rom with pneumatics slides 1
OPTIONAL
SAI2080 Horizontal mounting panel
SAI2064 Vertical mounting panel for two work posts
SAI2065 Rolling table with panel for two working places, without drawer unit
SAI2066 Drawer unit for rolling table without lock
SAI2074 Drawer unit for rolling table with lock
SAI2028 Support bracket set for vertical panel
SAI2088 Silence compressor, ICO-P50 type
SAI2068 Bookrest for schemes on panel
SAI2089 Electrical connectors holder
PNEUTRAINER-200
37
PNEUTRAINER-200
Skills developed:
38
SAI2282 PNEU-202 Advanced pneumatics composition
Ref. Description Quantity
Air operated valves
SAI2020 3/2 NC air operated single valve 1
SAI2010 3/2 NC timer valve. Convertible. 1
SAI2023 5/2 air operated single valve 1
SAI2024 5/2 air operated double valve 3
SAI2107 Block of 2 5/2 double + 1 single valves 1
Flow control equipment
SAI2007 "OR" function 1
SAI2124 "OR" double valve 1
SAI2006 "AND" function 1
SAI2125 "AND" double valve 1
SAI2031 Single direction speed controller (double) 2
SAI2033 Quick exhaust valve 1
SAI2008 Check valve 1
SAI2126 Flow controller with pilot check valve 2
SAI2030 Dual speed controller for single acting cylinder 1
Actuators
SAI2027 Single acting cylinder 1
SAI2026 Double acting cylinder 2
SAI2071 Double acting cylinder with adjustable cushion 1
SAI2118 Mechanically coupled rodless cylinder 1
SAI2123 Cylinder with load 1
Various, Pneumatics
SAI2029 Vaccum pad unit/ venturi (vaccum ejector) 1
SAI2003 Pressure indicator (red) 1
SAI2127 Pressure vessel 1
SAI2012 Pneumatic counter 1
Accesories
SAI2057 20+20m blue/ white flexible tube set (4mm.) 1
SAI2058 Set of 10 tee fittings 1
SAI2059 Set of 5 1/8" plugs 1
SAI2060 Set of 10 x 4 mm. plastic plugs 1
SAI2132 Set of 10 "AND" fittings 1
TK-3 Tube-cutter 1
SAI2078 Component-containing box 1
SAI2307 10m black flexible tube set (6 mm.) 1
TG-1 Tube extractor 1
Training supports
SAI2061 Documentation manual 1
SAI2070 CD-Rom with pneumatics slides 1
OPTIONAL
SAI2080 Horizontal mounting panel
SAI2064 Vertical mounting panel for two work posts
SAI2065 Rolling table with panel for two working places, without drawer unit
SAI2066 Drawer unit for rolling table without lock
SAI2074 Drawer unit for rolling table with lock
SAI2028 Support bracket set for vertical panel
SAI2088 Silence compressor, ICO-P50 type
SAI2068 Bookrest for schemes on panel
SAI2089 Electrical connectors holder
PNEUTRAINER-200
39
PNEUTRAINER-200
Skills developed:
-Concepts and principles of electricity and pneumatics
-Identification and use of electro- pneumatic symbology
-Analysis and design of sequential circuits based on relays
-Analysis and design of circuits using proximity sensors
40
SAI2283 PNEU-203 Basic electro-pneumatics composition
Ref. Description Quantity
Air treatment
SAI2091 Air cleaning unit with 3/2 distribution valve 1
SAI2092 Distribution block 1
SAI2005 Pressure regulator with pressure gauge 1
SAI2004 1MPa pressure gauge 1
Flow Control equipment
SAI2031 Single direction speed controller (double) 2
Actuators
SAI2027 Single acting cylinder 1
SAI2026 Double acting cylinder 2
Solenoid valves
SAI2050 3/2 NC single solenoid valve 1
SAI2052 5/2 single solenoid valve 2
SAI2053 5/2 double solenoid valve 3
Control Modules
SAI2056 24V power supply unit 1
SAI2036 Electrical inputs assembly (pushbutton board with 3 push buttons) 1
SAI2038 Set of 3 relays 1
SAI2047 Indicators (pilot light, hummer) 1
SAI2049 Electrical distributor 1
SAI2043 Reed switch 4
SAI2042 Left roller solid state switch 2
P/V V/P converters
SAI2041 Electrical contact pressure switch 1
SAI2098 Electrical contact pressure gauge 1
Accesories
SAI2057 20+20m blue/ white flexible tube set (4mm.) 1
SAI2058 Set of 10 tee fittings 1
SAI2059 Set of 5 1/8" plugs 1
SAI2060 Set of 10 x 4 mm. plastic plugs 1
TK-3 Tube-cutter 1
SAI2055 Component-containing box 1
SAI2077 10m black flexible tube set (6 mm.) 1
SAI2307 10m black flexible tube set (6 mm.) 1
TG-1 Tube extractor 1
Training supports
SAI2061 Documentation manual 1
SAI2070 CD-Rom with pneumatics slides 1
OPTIONAL
SAI2080 Horizontal mounting panel
SAI2064 Vertical mounting panel for two work posts
SAI2065 Rolling table with panel for two working places, without drawer unit
SAI2066 Drawer unit for rolling table without lock
SAI2074 Drawer unit for rolling table with lock
SAI2028 Support bracket set for vertical panel
SAI2088 Silence compressor, ICO-P50 type
SAI2068 Bookrest for schemes on panel
SAI2089 Electrical connectors holder
PNEUTRAINER-200
41
PNEUTRAINER-200
Skills developed:
- Analysis and design of sequential circuits with different
detectors
- Programmed control of pneumatic circuits
- Diagnosis and repair of breakdowns in electro-pneumatic
circuits
42
SAI2284 PNEU-204 Advanced electro-pneumatics composition
Ref. Description Quantity
SAI2052 5/2 double solenoid valve 2
SAI2054 5/3 closed center type solenoid valve 1
SAI2114 Block of two 5/2 double + 1 single solenoid valves 1
Control Modules
SAI2056 24V power supply unit 1
SAI2035 ON/OFF switch 1
SAI2034 Emergency stop (electric) 1
SAI2036 Electrical inputs assembly (pushbutton board with 3 push buttons) 1
SAI2038 Set of 3 relays 2
SAI2047 Indicators (pilot light, hummer) 1
SAI2040 Set of 2 timer relays 1
SAI2048 Electrical counter 1
SAI2049 Electrical distributor 1
SAI2043 Reed switch 4
SAI2128 Solid state autoswitch 2
SAI2044 Inductive proximity switch 1
SAI2046 Capacitive proximity switch 1
SAI2045 Optical proximity switch 1
SAI2042 Left roller solid state switch 2
P/V V/P converters
SAI2041 Electrical contact pressure switch 1
SAI2095 Pressure switch with transistor output 1
SAI2098 Electrical contact pressure gauge 1
SAI2097 Programable digital pressure switch with analog and switch outputs 1
SAI2096 Vacuum switch with transistor output 1
Accesories
SAI2057 20+20m blue/ white flexible tube set (4mm.) 1
SAI2058 Set of 10 tee fittings 1
SAI2059 Set of 5 1/8" plugs 1
SAI2060 Set of 10 x 4 mm. plastic plugs 1
SAI2132 Set of 10 "AND" fittings 1
TK-3 Tube-cutter 1
SAI2055 Set of connection cables 1
SAI2079 Component-containing box 1
TG-1 Tube extractor 1
SAI2307 10m black flexible tube set (6 mm.) 1
Training supports
SAI2061 Documentation manual 1
SAI2070 CD-Rom with pneumatics slides 1
OPTIONAL
SAI2080 Horizontal mounting panel
SAI2064 Vertical mounting panel for two work posts
SAI2065 Rolling table with panel for two working places, without drawer unit
SAI2066 Drawer unit for rolling table without lock
SAI2074 Drawer unit for rolling table with lock
SAI2028 Support bracket set for vertical panel
SAI2088 Silence compressor, ICO-P50 type
SAI2068 Bookrest for schemes on panel
SAI2089 Electrical connectors holder
PNEUTRAINER-200
43
PNEUTRAINER-200
Skills developed:
- Air treatment concepts
- Function of the pneumatic and electro-pneumatic
elements
- Analysis of simple pneumatic circuits
- Maintenance of pneumatic circuits
- Design of simple pneumatic systems
- Concepts and principles of electricity and pneumatics
- Identification and use of electro- pneumatic symbology
- Analysis and design of sequential circuits based on
relays
- Analysis and design of circuits using proximity sensors
44
SAI2285 PNEU-205: Pneumatics- electro-pneumatics composition
Ref. Description Quantity
Flow Control equipment
SAI2007 "OR" function 1
SAI2124 "OR" double valve 1
SAI2006 "AND" function 1
SAI2031 One-way flow control valve (double) 2
SAI2033 Quick exhaust valve 1
Actuators
SAI2027 Single acting cylinder 1
SAI2026 Double acting cylinder 2
Solenoid valves
SAI2050 3/2 NC single solenoid valve 1
SAI2052 5/2 single solenoid valve 2
SAI2053 5/2 double solenoid valve 3
Control modules
SAI2056 24V power supply unit 1
SAI2036 Electrical inputs assembly (pushbutton board with 3 push buttons) 1
SAI2038 Set of 3 relays 1
SAI2047 Indicators (pilot light, hummer) 1
SAI2049 Electrical distributor 1
SAI2043 Reed switch 4
SAI2042 Left roller solid state switch 2
Converters P/V V/P
SAI2041 Electrical contact pressure switch 1
SAI2098 Electrical contact pressure gauge 1
Accesories
SAI2057 20+20m blue/white flexible tube set (4mm.) 1
SAI2058 Set of 10 tee fittings 1
SAI2059 Set of 5 1/8" plugs 1
SAI2060 Set of 10 x 4 mm. plastic plugs 1
TK-3 Tube-cutter 1
SAI2055 Set of connection cables 1
SAI2062 Component-containing box 1
TG-1 10m black flexible tube set (6 mm.) 1
SAI2307 Tube extractor 1
Training supports
SAI2061 Documentation manual 1
SAI2070 CD-Rom with pneumatics slides 1
OPTIONAL
SAI2080 Horizontal mounting panel
SAI2064 Vertical mounting panel for two work posts
SAI2065 Rolling table with panel for two working places, without drawer unit
SAI2066 Drawer unit for rolling table without lock
SAI2074 Drawer unit for rolling table with lock
SAI2028 Support bracket set for vertical panel
SAI2088 Silence compressor, ICO-P50 type
SAI2068 Bookrest for schemes on panel
SAI2089 Electrical connectors holder
PNEUTRAINER-200
45
PNEUTRAINER-200
Skills developed:
- Pressure regulation and positioning
- Analysis of the control systems in a closed loop
- Assembly and preparation of pneumatic systems with
feedback
46
SAI2286 PNEU-206: Proportional pneumatics composition
Ref. Description Quantity
Air treatment
SAI2091 Air cleaning unit with 3/2 distribution valve 1
SAI2092 Distribution block 1
SAI2005 Pressure regulator with pressure gauge 1
Actuators
SAI2120 Stroke reading cylinder 1
SAI2121 Pulse counter for stroke reading cylinder 1
Various Pneumatics
SAI2127 Pressure vessel 1
Control modules
SAI2056 24V power supply unit 1
P/V V/P converters
SAI2097 Programable digital pressure switch with analog and switch outputs 1
SAI2099 Programable proportional electro-pneumatic regulator 1
SAI2104 Analog pressure sensor 1
SAI2105 Pressure switch/digital pressure display for analog sensor 1
Accesories
SAI2057 20+20m blue/ white flexible tube set (4mm.) 1
SAI2058 Set of 10 tee fittings 1
SAI2059 Set of 5 1/8" plugs 1
SAI2060 Set of 10 x 4 mm. plastic plugs 1
TK-3 Tube-cutter 1
SAI2055 Set of connection cables 1
SAI2602 Component-containing box 1
TG-1 Tube extractor 1
SAI2307 10m black flexible tube set (6 mm.) 1
Training supports
SAI2061 Documentation manual 1
SAI2070 CD-Rom with pneumatics slides 1
OPTIONAL
SAI2080 Horizontal mounting panel
SAI2064 Vertical mounting panel for two work posts
SAI2065 Rolling table with panel for two working places, without drawer unit
SAI2066 Drawer unit for rolling table without lock
SAI2074 Drawer unit for rolling table with lock
SAI2028 Support bracket set for vertical panel
SAI2088 Silence compressor, ICO-P50 type
SAI2068 Bookrest for schemes on panel
SAI2089 Electrical connectors holder
PNEUTRAINER-200
47
PNEUTRAINER-200
Customized compositions
The flexibility and modularity of PNEUTRAINER-200 allow it to adapt to all kinds of client requirements and budgets.
The following pages contain all the pneumatic and electro-pneumatic components available, classified by categories.
The user will be able to configure his/ her own PNEUTRAINER-200 composition in accordance with his/ her needs or to complete
a standard composition already acquired.
48
Assembly panels and complements
Based on an anodized extruded aluminium structure, we can offer a number of solutions for panels to carry out the practial
activities proposed for the various configurations.
PNEUTRAINER-200
49
PNEUTRAINER-200
Air preparation
50
Manual – mechanical valves
PNEUTRAINER-200
51
PNEUTRAINER-200
52
Air operated valves
PNEUTRAINER-200
53
PNEUTRAINER-200
54
Actuators
PNEUTRAINER-200
55
PNEUTRAINER-200
Pneumatics various
56
Solenoid valves
PNEUTRAINER-200
57
PNEUTRAINER-200
Control modules
58
PNEUTRAINER-200
59
PNEUTRAINER-200
Control modules
60
P/V – V/P converters
PNEUTRAINER-200
61
PNEUTRAINER-200
62
Accessories
PNEUTRAINER-200
63
PNEUTRAINER-200
Didactic supports
SMC INTERNATIONAL TRAINING bases the design of its products on the model involving “Development of Competence”, and
so, in addition to its hardware resources, our company offers a series of teachware suppplements for comprehensive training in
these disciplines, in order to attain the SKILLS proposed.
64
PNEUTRAINER-200
65
PNEUTRAINER-200
Documentation
66
Other didactic supports
Pneumatic slides:
Set of slides organized in
chapters to be used as a
support in the laboratory. In CD
format or projector slides. More
information on page 64.
PNEUTRAINER-200
67