Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SA-YQZ60 HYDRAULIC PULLER TENSIONER, works equally well for both pulling and tensioning conductors, ideal for re-
conductoring on existing power lines.
Tensioner Perfomance General Features:
Max.Pull/Tensioning Force
(kN) : 60/60 • Bull wheel with wear proof MC
Continuous Pull/Tension (kN) : 55/55
Nylon lining segments.
Max Pulling/releasing
speed(km/h) : 5/5
• Closed hydraulic circuit and bi-
Bull wheel bottom of groove directional variant plunger
diameter (mm) : Φ1500 pump, infinitely variable pull/
Bull wheel bottom of grove tension control.
diameter (mm) : 6 • Rexroth pump and motor, Italian
Max.suitable rope diameter
(mm) : Φ40
RR reducer, model C attached
reel winder
Engine • S p r i n g a p p l i e d h y d r a u l i c
Model
Deutz F4L914 released brake, overload
: (Germany) protection is on the safe side
Power (kW) : 82.5 and easy operation
Speed (rpm) : 2000
• There is a hydraulic circuit for
Dimension Weights
drive, matched reel stand
5520 x 1890 x DW2240 A
Length x width x height
: 2400
Weight : 4800 kg Main Components:
6
3. SA-YZ2X40B HYDRAULIC TENSIONER
SA-YZ2X40B HYDRAULIC TENSIONER it’s used for stringing various conductors and earth wires. Suitable for stringing one
conductor or two bundle conductors
Puller Perfomance
Max.Tension(kN) : 2x40 or 1x80 General Features:
Continuos Tension (kN) : 2x35 or 1x70
Main Components:
7
2. DRUM STAND
Drum stand are used for lifting and holding conductor drums during tension stringing
Uses:
The drum lifting jacks (drum stand) are used for lifting and holding
conductor drums during tension stringing. Lifting of drums can be achieved
either manually through gear mechanism or through handy hydraulic
pumps. Shaft is made of steel continuous solid mild steel material or steel
pipe with manual brake arrangement.
Notes:
8
4. HYDRAULIC COMPRESSOR
Hydraulic Compressor are usually used to connect two different lengths of conductor
Uses:
Hydraulic Compressor
Rated Oil
Item Number Model Flow (L/min) Engine Power (kW) Weight (kg)
Pressure (Mpa)
Honda
16146 YBG-94WQ 75 1.5 Gasoline GX 4.1 68
160
9
5. HEAD PRESS
Uses:
Notes :
Head Press
Maximum
Maximum Oil Applicable
Item Number Model Compression Stroke (mm) Weight (kg)
Pressure (Mpa) conductor
(kN)
16104 QY -125 1250 94 <ACSR720 25 40
10
6.7.8. STEEL&ALUMINIUM COMPRESSION DIES
Uses:
The specification of die sets is steel (G) or Aluminium (L) the outside
diameter of compression joint tube. The specification of the dies must be
match to the size of the steel tube or Aluminium tube for the conductor.
Hydraulic Compressor
Serial specification of Compression
Item Number Model
die sets
16124 QY -125 Copper Terminators : 16-800mm3
11
9. HYDRAULIC CUTTER
Uses:
Used to cut the ACSR, Copper, Alumunium Conductor and mild carbon
steel stick
Notes :
Hydraulic Compressor
Max Cutting
Item Number Model Cutting Range Weight (Kg)
Force (kN)
12
10.11. ANTI TWISTING BRAIDED STEEL ROPE 18 MM & 11 MM
Anti - Twisting Braided Steel Rope 18mm & 11mm is mainly implemented in press conductor
Uses:
Notes :
1. Braided 1960 Mpa high-strength galvanized steel wire rotation resistance
during pulling. The specification and length of the steel wire rope can be
customized according to your request.
13
12. STRINGING BLOCK 2 NYLON 1 SHEAVE
Single nylon used for the stringing of overhead single conductor and OPGW
Uses:
Mounted on ball bearings, the single nylon (nylatron) sheave aerial roller is
used for the stringing of overhead single conductor and OPGW. And small
size one with wear proof nylatron sheave (wheel) is most suitable for
stringing of GSW/ACS earth wire as well. There are different connection
arrangements available for the aerial roller, namely, swivel clevis and fixed
connection.
14
13. STRINGING BLOCK NYLON 3 SHEAVE
3 Nylon Sheave Aerial Rooler is used for stringing of twin bundle / triple bundle overhead power transmission line
Uses:
The 3 nylon sheave aerial roller (stringing block or running out block) is
used for stringing of twin bundle / triple bundle overhead power transmission
line. The central sheave can be made either from nylon or from even more
wear-proof material, nylatron while the side frames are made from
galvanized steel C-section. The sizes, S and E can be custom-made against
client’s request; Please specify the requested size S(spacing), either
standard one or 146mm, or 170mm, or 225mm, etc. when raising inquiry or
placing order.
15
14. SWIFEL 8 T
Swivel joints are used to connect the conductor via.mesh socks and release torsion strain during stringing operation.
Uses:
Made from steel of high tensile strength, swivel joints are used to connect
the conductor via. mesh socks (or connect steel rope) and release torsion
strain accumulation during stringing operation. c/w roller covering the pin
bolt, sharp bending of steel rope eye on the pin bolt can be improved so as
to prolong the working life of eye of steel rope. With two kinds of bearings
installed inside, it can not only stand the axial load but also can swivel
smoothly when the radial load exists (the swivel joint is passing the groove
of sheave of aerial roller, and tension on the two ends of the swivel joint
are not in the same straight line but with angle).
16
15. FIX JOINT SWL 80 KN
Fixed joint is used to connect lengths of anti-twisting steel wire rope (pilot wire) together
Uses :
Made from steel of high tensile strength, the fixed joint is used to connect
lengths of anti-twisting steel wire rope (pilot wire) together; Small outer
diameter of cross section makes it pass the guide rope pulley or groove of
bull wheel of the puller smoothly; Wide slot facilitates easy fitting in of pilot
wire eye, and reduce the chance of rope damage while it is going through
the groove of bull- wheel of puller; c/w a small roller to cover the bolt pin and
avoid sharp turning of the pilot wire.
Fixed Joint
Dimension (MM)
Model No SWL Max.W.L. Min. B.L. Weight
Pull Force (kN)/ Speed (m/min)
(kN) (kN) (kN) (kg)
FJ52-272 A B C D E F
0 52 118 30 24 52 20 80 130 270 0.930
17
16. CRADLE REEL ELEVATORS D 1600 MM
The reel stand is used to support & lift the steel tubular reel wound with steel rope
Uses:
The reel stand made of welded steel tubes, is used to support & lift the
steel tubular reel wound with steel rope so as to provide required ground
clearance during payout operation or winding operation of steel rope.
One side disc brake is provided.
18
17.18 DUPONT ROPE 16 MM & 8 MM
Dupont Rope is used as pilot rope or pulling rope for transmission line
Notes :
1. The Material is Dupont silk fibre, twelve strands structure with protective
covering .
2. This rope is widely used as leading rope in line construction.
19
19. STANDARD REELS D 1400 MM
Uses:
The steel tubular reel / drum / bobbin made of welded steel tubes with
protective paint or coating to prevent rusting, is used to wind and/or unwind
steel rope. The steel reel can be supplied with two nos. of cross plates on
each side at request.
Drum Stands
Barrel Dia./
Flange Dia. Reel Traverse
Model No. Cross Spacing
(D in mm) (B in mm)
(C/A in mm)
STRA-14000 1400 560 570/420
20
20.21.22.23 MESH SHOCK JOINTS FIX JOINT
Mesh Sock Single is used to temporarily connect aluminum, steel or copper conductor to steel rope
Uses:
Mesh sock joints are divided into two categories: single open end one and 20.21. Single Head Hawk & Zebra
double open end one; single open end one is used to temporarily connect
aluminum, steel or copper conductor to steel rope while double open end is
used to connect aluminum, steel or copper conductors together with each
other. They consist of variable pitch steel wires, which effectively distribute
the gripping effect on the conductor. For medium load of Cable
E M
B C D E
A
21
24.25.26.27 SELF GRIPPING CLAMP
Self-gripping clamps with changeable liners suitable for gripping conductor with optical fibre core
Uses:
OPGW
1. Optical Ground Wire “OPGW” Self Gripping Clamps Overhead
Power Transmission Lines type 400/12
LINERS
Self-gripping clamps with changeable liners suitable for gripping
conductor with optical fibre core – outward from 6 to 23 mm. dia. Made
of high tensile alloy steel, hot forged, head treated, finely machined and
cadmium plated.
• Maximum working load 3000 daN
• Maximum safety load 4900 daN
• Maximum breaking load 15000 daN
GSW & ACSR
• Weight 7 kg
Suitable for A.C – AAC – ACSR and copper conductor with a complete
range of changeable liner. Made of high tensile alloy steel, hot forged,
heat treated, finely machined and cadmium plated. These self gripping
clamps had been studied for working on cables and conductors of
different diameters just by changing the liners. The couples liners give
the chance to work at lower cost on conductors of different materials and
diameters without changing kind of clamp.
Pair Of Liners Art . CT41005..-S00
Conductor Liners for aluminium
Linner Liners for steel antitwisting pulling rope Liners for Steel Antitwisting pulling rope
diameters (mm) conductors
Linner ACSR Hawk 21 22.5 CT41005L07-s00 To round section steel cable, supplied on To Square section steel cable ,supplied on
Linner ACSR Dove 22.5 24 CT41005L08-s00 request with exact diameter between 13 22 request with exast diameter between 13 24
Linner ACSR Zebra 27 28.5 CT41005L11-s00 Art ct410051..-s00 Art CT4100 5Z..-S00
22
28. INSPECTION TROLLEY FOR TWO BUNDLE
Uses:
Notes :
Inspection Trolleys and Overhead Lines Bicycles for Two Bundle Conductors
Maximum
Rated Loan Conductor
Item Number Model Through Weight (kg) Remark
(Kn) Distance (mm)
Diameter (mm)
17256 SFS1-400 1.5 Φ 70 400 38 Horizontal
23
29. TIRFOR
Uses:
24
30. SNACTH BLOCK SINGLE 3 T
Snacth Block is used in tower erection or hoisting of machinery & tools, conductors and other materials
Uses:
Single Sheave Snatch Block Open and Eye Type with Swivel Locking
Maximum
Rated Loan Conductor
Item Number Model Through Weight (kg) Remark
(Kn) Distance (mm)
Diameter (mm)
17256 SFS1-400 1.5 Φ 70 400 38 Horizontal
25
31. CHAIN LEVER HOIST 3T X 3 METER
Chain Lever Hoist 3 T X 3 Meter is used as tightening device during Tower Erection and stringing operation
Uses:
• Pull Lift is used as tightening device during Tower Erection and stringing
operation
• It is very useful for anchoring, tightening and pulling operation and very
convenient for safe, minute and convenient adjustment of rope, chain or
anchoring status and the effort required for the same is very less
compare to hand wrenching block
• Body made of MS, Galvanized Steel
• With Safety Lock and bi-directional operation
• Can be supplied with required chain length and load
• capacity
26
32. BV WINCH 3 T
Uses:
Features :
1. Owing to the dual – Bull wheels structure, it can reduce damage to the
wire cable.
Illustration.
Inspection Trolleys and Overhead Lines Bicycles for Two Bundle Conductors
Item Drum
Number Engine Pull Force (kN)/ Speed (m/min)
Bottom
Of Dimensio Weight
Groove n (mm) (kg)
Power Speed Diameter
17256 Model (hp) (rpm) Slow Moderate Quick Reverse ( mm)
R 175 A 1000 x
Diesel 6 2600 30/5.7 18.9/9.1 7.6/22.7 -/6.5 Φ 230 670 x 305
Engine 600
27
33. SAFETY BELT FULL BODY
Safety Belt Full body prevent workers in the event of a free fall
Uses:
The harness serves two purposes, first, distributing fall forces safely
across a worker’s body in the event of a free fall, and second, providing
freedom of movement sufficient to allow the worker to effectively perform
his or her job
Notes :
Safety Harness
Item Number Model Load (Kg) Remarks
Full Body
23064
Harness 100 Band Type Illustration. Source : Basin Electric
28
34. 35 SHACKLE D 38 MM 50 KN & D 34 MM 30 KN
Uses:
Made from steel alloy of high tensile strength, D-shackle is used for
intermediate connection purpose under tensions with the characteristics of
large inner connection room and thin screw bolt.
Shackle
Dimensions (mm) Weight
Capacity
A B G E K M (Kg)
3.0 34 16 72 74 125 97 0.80
5.0 38 20 78 78 136 107 1.12
29
36. SLING 16 MM
Uses:
Sling is a Wire for lifting and binding applications. Sling / Line Wire is
made of full steel.
Notes :
Sling
Item Number Model Dia Remarks
- Full Steel 16 MM -
30
37. ZOOM SAG SCOPE
Sag Scope is used to observe the conductor sagging operation and measure the sag level precisely.
Uses:
Notes :
31
38. HEAD BOARD FOR BUNDLE CONDUCTORS
Uses:
Notes :
32
42. EARTH ANCHOR (DRILL) 50 Kn
Uses:
The Earth Anchors are used for fixing and fastening the
equipment such as stringing machines, motorized winches, stand
in power line construction. The tools are anchored into land, and
connected with steel wire rope through hoists, to fixing the puller
tensioners, winches, drum stands, towers temporarily. These tools
can be used repeatedly
Earth Drill
Maximum Disk
Item Rated Breaking Length Weight(Kg
Model depth Diameter
Number Load (kN) Load (kN) (mm) )
(mm) (mm
02103 SDZ3 50 100 1500 Φ 350 1710 21
34
43. STEEL TURN BUCKLE 50 KN
Turn Buckle is used to anchor/ tight various accessories, conductor and equipment
Uses:
1. Turn Buckle is used to anchor/ tight various accessories, conductor and
equipment during stringing operation / after end of stringing section
2. Made of Galvanized Steel
Inspection Trolleys and Overhead Lines Bicycles for Two Bundle Conductors
Item Drum
Number Engine Pull Force (kN)/ Speed (m/min)
Bottom
Of Dimensio Weight
Groove n (mm) (kg)
Power Speed Diameter
17256 Model (hp) (rpm) Slow Moderate Quick Reverse ( mm)
R 175 A 1000 x
Diesel 6 2600 30/5.7 18.9/9.1 7.6/22.7 -/6.5 Φ 230 670 x 305
Engine 600
35
44. DINAMO METER DIGITAL
Heavy duty digital Crane Scale has a high accuarcy hanging scale up to 10 Ton
Uses:
Notes :
General Specifications :
36
47. GROUND STICK 275 Kv
Ground Stick 275 kV offer a secure, reliable means to discharge potentially lethal energy from HV equipment.
Notes :
1. Each set consists of 3 nos. insulated rod of dingle / multiple sections and
3x (9m-22m) lengths of copper cable of 35/50 sq.mm wrapped with PVC
jacket and ended with a grounding clamp or earthing pin. There are two
kinds of heading conductor clamps available :double duckbill (double
spring) type and round screw type.
1/3 set of Three Phase Separate Grounding Set with Round screw type Rod of Double
Grounding Clamp and Double duckbill heading conductor clamp Sections c/w
type heading conductor clamp
38
48. GROUNDING POLE AND CLIP
Grounding Pole And Clip used to temporary short and grounding for dead line equipment
Uses:
1. Used to temporary short and grounding for dead line equipment and
circuit, prevent the accidental damage to operator and equipment.
2. Should confirm single phase or triphase before placing order
39
49. GROUNDING WIRE CIRCUIT
Grounding Wire and Short Circuit Wire used to temporary short to prevent the accidental damage
Uses:
1. Used to temporary short and grounding for dead line equipment and
circuit, prevent the accidental damage to operator and equipment.
2. Should confirm single phase or triphase before placing order.
40
50. PERSONAL SAFETY GROUNDING WIRE
Personal Safety Grounding Wire is prevent worker from getting an faradism shock on the dead line
Uses:
To Prevent worker from getting an faradism shock on the dead line, serve as
auxiliary safeguard to prevent the unexpected electric shock, protect the
worker’s life safety. Applicable for various voltage rate, forbid grounding with
safety grounding wire, electric inspection grounding security circuit
Notes:
1. It is needless to clip conductor manual, just adopt auto clip conductor by
failing clip to conductor with nylon, while need to disassemble only lift
up.
41
51. SPLICING SLEEVE PROTECTOR
Uses:
For line stringing and cable pulling, they are designed to avoid torsion strain
accumulation.
Notes :
42
52. MI-20 20 Kve
Mi-20 Kve Hv Megohmmeter is for measurement of insulation resistances using test voltages up to 20kV
Uses:
Features :
Maximum
Test Voltages Megohmeter Internal Current
Short Circuit Curent Test Voltages Resistance Analogue Indicator
Accuracy Accurary Limiting Resistance
Reading
5 kV 1 T Ω @ 5 kV 10 MΩ @ 5 kV
±2% of nominal test Up to 98 mm scale
10 kV 2 T Ω @ 10 kV Class 2 (±2% of full
voltages on R≥10 G length, taut band ,
500 µΑ±5% 15 kV 3 T Ω @ 15 kV scale deflection).
Ω 20 MΩ @ 10 kV with mirror
20 kV 4 T Ω @ 20 k
43