Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
3508
507 bkW (680 bhp) @ 1200 rpm
3508
507 bkW (680 bhp) @ 1200 rpm
Metric English
Engine Specifications
Bore 170 mm 6.7 in
Stroke 190 mm 7.5 in
Displacement 34.5 L 2105 cu in
Aspiration N/A N/A
Fuel System UI
Engine Data
BMEP 1514 kPa 220 psi
Air Flow Rate (@ 25° C, 101.3 kPa) 39 m³/min 1381 ft³/min
Inlet Manifold Pressure @ Rated 134 kPa 39.5 psi
Inlet Manifold Temperature @ Rated 83 ° C 181.4 ° F
Jacket Water Temperature N/A N/A
Exhaust Stack Temperature 573 ° C 1064 ° F
Exhaust Flow Rate (@ Stack Temp 101.3 kPa) 106.6 m³/min 107 ft³/min
Engine Coolant Capacity 103 L 27 gal
3508
507 bkW (680 bhp) @ 1200 rpm
PERFORMANCE CURVES
* Other engine ratings are available. Please contact dealer for performance data.
TSS-TM3152-06-VS-PET-7154019.pdf © 2018 Caterpillar All Rights Reserved Page 2 of 3
OIL AND GAS - Technical Spec Sheet
LAND DRILLING, LAND PRODUCTION
3508
507 bkW (680 bhp) @ 1200 rpm
Engine Performance is corrected to inlet air The corrected performance values shown for Cat
standard conditions of 99 kPa (29.31 in Hg) and 25° engines will approximate the values obtained when
C (77°F) temperature. These values correspond to the observed performance data is corrected to SAE
the standard atmospheric pressure and J1995, ISO 3046-2, ISO-8665, ISO-2288, ISO-
temperature as shown in SAE J1995. 9249, ISO-1585, EEC 80/1269 and DIN70020
standard reference conditions.
Performance measured using a standard fuel with
fuel gravity of 35 degrees API having a lower
heating value of 42,780 kJ/kg (18,390 BTU/lb) when
used at 29°C (84.2°F) where the density is 839.9
g/L (7.001 lb/gal).