Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
LOADER REFILLS
STANDARD EQUIPMENT WB SPECIFICATIONS
97S-2
The design of the front loader allows an excellent tensile strength Engine oil ....................................................................................8,6 l • Turbo STAGE 2 Komatsu engine • Road homologation - type of oil for engine, transmission, brakes
distribution and the upkeep of movement parallelism when lifting and Cooling system ............................................................................18 l • “Full Power Shift” with electronic control • Lights for road travel and hydraulic system
lowering the bucket. Furthermore, thanks to the linkage geometry the Diesel tank .................................................................................130 l (EGM): • Rotating beacon - routine maintenance operations to be
greasing points have been reduced. Hydraulic oil tank..........................................................................92 l - automatic or semi-automatic selection • Internal and external mirrors performed every 500, 1.000 and 2.000 with ENGINE STEERING
Front axle oil ................................................................................13 l - direction and gear indicator • ROPS/FOPS cab with heater and fan partial service hours
Standard bucket width .......................................................2.420 mm The engine has been developed in compliance with the strictest The front and rear steering wheels are controlled by a “Load-Sensing”
Rear axle oil .................................................................................12 l - electronic anti-theft system with code • Tinted glass - language selection (Italian, English, German,
Standard bucket capacity (ISO 7546) ......................................1,1 m3 European standards (97/68/CE - STAGE 2) on the reduction of exhaust hydrostatic power steering system with a priority valve and by an
STD bucket weight ..................................................................440 kg Gearbox oil...................................................................................16 l • “Kick-down” function • Adjustable steering wheel French, Spanish, Portuguese) emissions. electronic device for the selection of the 3 steering modes.
Lifting capacity • 4 wheel drive • Adjustable seat with safety belt - tyre pressure
Model ......................................................... Komatsu S4D106-2SFA Steering radius, with 4 steering wheels and inner wheel not braked:
at maximum height: ..........................................3.820 daN (3.900 kg) • Limited slip differential on both axles • Front and rear windshield wipers - maintenance and warning alarms Type...............................vertical, 4-cycle water-cooled diesel engine loader outer angle ..............................................................4.390 mm
Lifting capacity BACKHOE • 4 wheel steering (3 modes) with electronic • Lockable internal storage compartment • Indicators: transmission oil temperature, 4WD Displacement ......................................................................4412 cm3 outer wheel ........................................................................4.150 mm
at ground level (ISO 8313): ..............................5.195 daN (5.300 kg) alignment • Clothes hook and cup-holder engagement, brake oil level, differential lock,
The main boom has a reinforced structure built with cast ends, allows Cyl. bore x stroke ........................................................106 x 125 mm The values are valid either with 24” and with 28” tyres.
Breakout force (ISO 8313) ...............................6.383 daN (6.500 kg) • Front mudguards • Fully opening bonnet fuel level indicator, hour meter, engine tank
180° rotations, always maintaining high rotation torque. Vertical N° of cylinders..................................................................................4
4x1 bucket width ................................................................2.440 mm
outriggers with adjustable wear device. • Declutch switch • Air cleaner, dry type, radial seal with clogging reservoir, preheating, engine speed, engine Compression ratio ....................................................................17,5:1
4x1 bucket capacity (ISO 7546) .............................................1,03 m3
• Foot pedal and hand control accelerator indicator and safety internal filter coolant temperature, engine oil pressure, air Combustion ..........................................................direct injection (DI)
Bucket breakout force (ISO 6015)....................5.780 daN (5.900 kg) • Horn • Fuel filter with water separator filter clogging Aspiration ......................................................................turbocharged
Arm breakout force (ISO 6015) ........................3.780 daN (3.850 kg) • Maintenance-free battery 155 Ah • “Load sensing”, variable displacement • Front counterweight (300 kg) Gross power .........................................................................74,5 kW
TRANSMISSION
Maximum rated power:
• 12V external electric plug axial pump
(SAE J 1349) ........................................73 kW / 97,8 HP / 2.200 rpm Electronically-controlled, four-wheel drive, “Full Power Shift”
• 12V power outlet in the cab • Multiple function digital display showing: (80/1269/EC) ........................................72 kW / 96,5 HP / 2.200 rpm transmission. EGM (Electronic Gear Management) gear controls for
• Antifreeze (-36°C) - front and rear axle alignment Max torque .........................................................378 Nm - 1.600 rpm changing driving direction and gears, in automatic or semi-automatic
• Front and rear working lights - speedometer (km/h or mph)
Dimensions Cooling system ......................................................................radiator
Air filter ..................................................dry filter with safety element
mode (using two buttons), at full power without disengaging the drive.
Other functions incorporated: system self-diagnosis, automatic
LOADER Starting system ..................................electric motor with pre-heating connection/disconnection of the four-wheel drive, and activation of
• Speed-Up • Lifting cylinder safety lock • General purpose bucket with bolted teeth air system for cold climate the anti-theft alarm using a PIN code.
Q
BACKHOE Travelling speed:
M
GEAR FORWARD REVERSE
• Electro-hydraulic backhoe shifting lock • Backhoe swing transport lock • Electro-hydraulic backhoe slide frame
WB97S-2
release lock OPERATING WEIGHT 1st 6,5 6,5
2nd 12 12
Standard machine operating weight.....................................8.190 kg
Total machine weight............................................................9.030 kg 3rd 23 23
4th 40 -
operating weight increase
F OPTIONAL EQUIPMENT 4x1 bucket ...............................................................................250 kg
offset boom..............................................................................150 kg
telescopic arm .........................................................................260 kg
A
E O
BB
• Cold area arrangement (-30°C) and • Hydraulic biodegradable oil pallet forks ...............................................................................200 kg AXLES
B
• Air Conditioning
• TÜV + TBG version (20 km/h or 40 km/h) • Air cyclone pre-filter “Heavy-duty” axles with planetary reduction gears in the wheel hubs.
• Additional front counterweight (170 kg) Front axle total oscillation angle 16°.
• Battery disconnection safety switch • Fuel filling pump
G
J • De-Luxe seat with 3” retractable safety belt Limited slip differential on both axles.
• Drive shaft guard (front) • Rubber pads for stabilisers • Additional toolbox HYDRAULIC SYSTEM
H
• Optional tyres • Hose burst valves: • Additional rear view mirror (right) Max front strength (Dynamic) ............................................8.000 daN
I K L - loader arm • Radio SyncroSystem hydraulics allows the operator very precise and Max rear strength (Dynamic) ...........................................10.000 daN
• Bumper
- backhoe • Backup alarm simultaneous movements. This system is energy efficient and
• Cold area arrangement (-22°C) incorporates two different working modes: Power and Economy.
- stabilisers
P
• LSS (Load Stabiliser System) • Attachments: - 4x1 bucket (for quick hitch)
• Auxiliary hydraulic circuits: - bolt-on cutting edge - angle-dozer blade (for quick hitch) Type............................................Close Load Sensing System CLSS Oil immersed disc brakes are actuated by individual braking on each
- auxiliary 3rd spool valve with floating function - cutting edge on teeth Pumps type ................................Variable displacement axial pistons rear wheel with 2 separate pedals. Total integral braking (4° gear) on
Pumps control system..................................................Load Sensing the 4 wheels is activated by operating the two pedals at the same
- auxiliary 3rd spool valve with floating function - 4x1 bucket
Main Valve (backhoe)............LIFD (Load Independent Flow Divider) time.
and “Return-To-Dig” - flip-over forks on 4x1 bucket modular type
U T - front auxiliary hydraulic circuit - hydraulic and mechanic quick hitch
V Max delivery........................................................................165 l/min Disc diameter ........................................................................270 mm
R
Z
W - additional front auxiliary hydraulic circuit - forks (for quick hitch) Working pressure...................................................................200 bar Total friction area................................................................2.310 cm2
(6-way valve) - gen. purpose bucket (for quick hitch) The parking or safety brake acts on the service brakes through a
YY Y hand operated lever.
BACKHOE
A. max height ................................................................4.220 mm P. digging depth SAE ....................................................4.500 mm • Alternative control pattern hydraulic swing) - range of buckets (300 mm ÷ 900 mm)
B. pin height ..................................................................3.440 mm - with extended telescopic ........................................5.650 mm ELECTRIC SYSTEM
• Auxiliary hydraulic circuits: • Offset boom - ditch cleaning bucket (1.400 mm)
BB. forks loading max height...........................................3.200 mm Q. reach at max height ..................................................2.500 mm TYRES
C. cab height .................................................................2.810 mm - with extended telescopic ........................................3.500 mm - hammer aux. circuit • Telescopic arm - ditch digging bucket (1.000 mm)
The electric system is easily accessible and protected: connections
D. max dumping height .................................................2.750 mm - with extended off-set ..............................................2.510 mm - auger aux. circuit • Offset boom with telescopic arm - hydraulic hammer are sealed and waterproof, and comply with the strictest international Standard: ...............................................................16.9 x 24 - 12 PR
E. max dumping reach (45°) ............................................750 mm R. max reach from swing centre....................................5.550 mm - 2-way aux. circuit for hydraulic attachments • Attachments: safety rules. Option: ...................................................................16.9 x 28 - 12 PR
F. dumping angle.....................................................................45° - with extended telescopic ........................................6.550 mm (including clamshell bucket with - mechanical quick hitch (for std buckets) 16.9 x 28 radial tyres
G. rollback angle ......................................................................45° S. max digging depth ....................................................4.950 mm Voltage........................................................................................12 V
H. digging depth ...............................................................110 mm
I. bucket reach (in transport)........................................1.930 mm
J. ground clearance .........................................................470 mm
- with telescopic ........................................................6.100 mm
T. digging reach ............................................................2.750 mm
U. rear tread ..................................................................1.950 mm
WB97S-2 Battery ....................................................................................155 Ah
Alternator ....................................................................................80 A
Starter ........................................................................................3 kW
K. wheel base................................................................2.175 mm V. front tread .................................................................1.950 mm CAB
NET POWER
L. backhoe swing centre distance.................................1.320 mm
M. transport length.........................................................5.895 mm
N. dumping height SAE .................................................3.700 mm
W. overall width (with bucket) ....................................... 2.420 mm
X. transport hoe height..................................................3.660 mm
- with telescopic ........................................................3.700 mm
Komatsu Utility Europe
Head Office
4 -W HEEL S TEERING SAE J1349
ROPS (ISO 9249, SAEJ1040) and FOPS (ISO 3449, SAEJ 231) cab
designed in order to offer the best visibility, ergonomy, low noise and
via Atheste 4 73 kW - 97,8 HP comfort. Two doors, full opening rear windows with front and rear
max dumping height .................................................3.950 mm
- with extended telescopic SAE ................................4.830 mm
- with off-set ..............................................................3.760 mm
Y. side shift.......................................................................605 mm
35042 Este (Padova) - Italy
Tel. +39 0429 616111
B AC K H O E L OA D E R OPERATING WEIGHT
FRAME
The frame is modular and has been developed for computer based
windscreen wipers. Internal lay out includes full adjustable seat, fresh
filtered air intake ventilation and easy to read front and side dash
- with extended telescopic max.................................5.050 mm YY. side shift with off-set ..................................................1.080mm Fax +39 0429 601000 welding processes; every main element is bolted directly to the frame board.
O. max digging height....................................................5.510 mm Z. telescopic stroke .......................................................1.150 mm www.equipmentcentral.com From 8.190 kg
to improve maintenance and to reduce down time.
- with extended telescopic ........................................6.510 mm utility@komatsu.it to 9.030 kg
- Values with 16.9 x 24 tyres
Backhoe
Thanks to the sturdiness of the structure and
the effectiveness of the hydraulic system,
the backhoe provides significant
Transmission tearout and digging force.
The WB97S-2 is fitted with “Full Power Shift” transmission, which The functional geometry ensures excellent
guarantees permanent traction of the wheels, even during gear changes, dumping height and digging depth, while at
and makes it possible to reach a maximum speed of 40 km/h. the same time guaranteeing minimum
The semiautomatic, electronically-controlled gear selection system is encumbrance on the road and perfect
Maintenance
operated using a knob, in a manner that is simple and intuitive for the visibility of the work area. Performance and
operator. The EGM (Electronic Gear Management) system, which is sturdiness combined with extreme versatility, Checks and routine maintenance on the
available as an option, allows automatic or semiautomatic gear selection. enhanced by the availability of the telescopic KOMATSU backhoe loaders take just
The EGM also manages other important functions, such as: arm or the device to dig beyond the wheel outline, a few minutes, and are extremely simple
• system self-diagnosis as well as the combination of the two. To to perform, without requiring any
• automatic engagement and disengagement of the 4-wheel drive complete all these versatile characteristics, there special equipment.
• activation of the anti-theft alarm system with customised code is also the possibility to fit the machine with a The extended greasing intervals
wide range of buckets and special equipment. reduce unning costs and service times,
Hydraulic System and increase the returns on the investment.
The KOMATSU backhoe loaders are equipped with the consolidated
“Syncro System” hydraulic system. The heart of the system is the variable flow-rate pump
Axles and Brakes
that feeds the exclusive CLSS (Closed Load Sensing System). This system ensures that only
The sturdiness and efficiency of the transmission the power strictly necessary is delivered and used, as well as guaranteeing high operating
are further enhanced by the adoption of efficiency in all conditions. Furthermore, the innovative LIFD distributor
“Heavy-Duty” axles and limited-slip differential (Load Independent Flow Divider) allows the speed of each movement to be completely
on both axles. Maximum operating safety is also independent from that of the others, and the proportionality remains unchanged even when
guaranteed by the excellent braking system, the resisting load changes. Basically, the hydraulic system ensures, as well as excellent
featuring multiple-disk service brakes in oil bath performance, shorter working cycles and thus greater productivity.
with independent circuits activated by two The two operating modes, “Power” and “Economy”, ensure maximum power when required,
separate pedals. or alternatively reduced power to save fuel when performing more general operations
or finishing-off.
4 5 6 7
WB97S-2 WB97S-2 WB97S-2
WB97S-2 B ACKHOE L OADER BACKHOE LOADER BACKHOE LOADER BACKHOE LOADER
Backhoe
Thanks to the sturdiness of the structure and
the effectiveness of the hydraulic system,
the backhoe provides significant
Transmission tearout and digging force.
The WB97S-2 is fitted with “Full Power Shift” transmission, which The functional geometry ensures excellent
guarantees permanent traction of the wheels, even during gear changes, dumping height and digging depth, while at
and makes it possible to reach a maximum speed of 40 km/h. the same time guaranteeing minimum
The semiautomatic, electronically-controlled gear selection system is encumbrance on the road and perfect
Maintenance
operated using a knob, in a manner that is simple and intuitive for the visibility of the work area. Performance and
operator. The EGM (Electronic Gear Management) system, which is sturdiness combined with extreme versatility, Checks and routine maintenance on the
available as an option, allows automatic or semiautomatic gear selection. enhanced by the availability of the telescopic KOMATSU backhoe loaders take just
The EGM also manages other important functions, such as: arm or the device to dig beyond the wheel outline, a few minutes, and are extremely simple
• system self-diagnosis as well as the combination of the two. To to perform, without requiring any
• automatic engagement and disengagement of the 4-wheel drive complete all these versatile characteristics, there special equipment.
• activation of the anti-theft alarm system with customised code is also the possibility to fit the machine with a The extended greasing intervals
wide range of buckets and special equipment. reduce unning costs and service times,
Hydraulic System and increase the returns on the investment.
The KOMATSU backhoe loaders are equipped with the consolidated
“Syncro System” hydraulic system. The heart of the system is the variable flow-rate pump
Axles and Brakes
that feeds the exclusive CLSS (Closed Load Sensing System). This system ensures that only
The sturdiness and efficiency of the transmission the power strictly necessary is delivered and used, as well as guaranteeing high operating
are further enhanced by the adoption of efficiency in all conditions. Furthermore, the innovative LIFD distributor
“Heavy-Duty” axles and limited-slip differential (Load Independent Flow Divider) allows the speed of each movement to be completely
on both axles. Maximum operating safety is also independent from that of the others, and the proportionality remains unchanged even when
guaranteed by the excellent braking system, the resisting load changes. Basically, the hydraulic system ensures, as well as excellent
featuring multiple-disk service brakes in oil bath performance, shorter working cycles and thus greater productivity.
with independent circuits activated by two The two operating modes, “Power” and “Economy”, ensure maximum power when required,
separate pedals. or alternatively reduced power to save fuel when performing more general operations
or finishing-off.
4 5 6 7
WB97S-2 WB97S-2 WB97S-2
WB97S-2 B ACKHOE L OADER BACKHOE LOADER BACKHOE LOADER BACKHOE LOADER
Backhoe
Thanks to the sturdiness of the structure and
the effectiveness of the hydraulic system,
the backhoe provides significant
Transmission tearout and digging force.
The WB97S-2 is fitted with “Full Power Shift” transmission, which The functional geometry ensures excellent
guarantees permanent traction of the wheels, even during gear changes, dumping height and digging depth, while at
and makes it possible to reach a maximum speed of 40 km/h. the same time guaranteeing minimum
The semiautomatic, electronically-controlled gear selection system is encumbrance on the road and perfect
Maintenance
operated using a knob, in a manner that is simple and intuitive for the visibility of the work area. Performance and
operator. The EGM (Electronic Gear Management) system, which is sturdiness combined with extreme versatility, Checks and routine maintenance on the
available as an option, allows automatic or semiautomatic gear selection. enhanced by the availability of the telescopic KOMATSU backhoe loaders take just
The EGM also manages other important functions, such as: arm or the device to dig beyond the wheel outline, a few minutes, and are extremely simple
• system self-diagnosis as well as the combination of the two. To to perform, without requiring any
• automatic engagement and disengagement of the 4-wheel drive complete all these versatile characteristics, there special equipment.
• activation of the anti-theft alarm system with customised code is also the possibility to fit the machine with a The extended greasing intervals
wide range of buckets and special equipment. reduce unning costs and service times,
Hydraulic System and increase the returns on the investment.
The KOMATSU backhoe loaders are equipped with the consolidated
“Syncro System” hydraulic system. The heart of the system is the variable flow-rate pump
Axles and Brakes
that feeds the exclusive CLSS (Closed Load Sensing System). This system ensures that only
The sturdiness and efficiency of the transmission the power strictly necessary is delivered and used, as well as guaranteeing high operating
are further enhanced by the adoption of efficiency in all conditions. Furthermore, the innovative LIFD distributor
“Heavy-Duty” axles and limited-slip differential (Load Independent Flow Divider) allows the speed of each movement to be completely
on both axles. Maximum operating safety is also independent from that of the others, and the proportionality remains unchanged even when
guaranteed by the excellent braking system, the resisting load changes. Basically, the hydraulic system ensures, as well as excellent
featuring multiple-disk service brakes in oil bath performance, shorter working cycles and thus greater productivity.
with independent circuits activated by two The two operating modes, “Power” and “Economy”, ensure maximum power when required,
separate pedals. or alternatively reduced power to save fuel when performing more general operations
or finishing-off.
4 5 6 7
WB97S-2 WB97S-2 WB97S-2
WB97S-2 B ACKHOE L OADER BACKHOE LOADER BACKHOE LOADER BACKHOE LOADER
Backhoe
Thanks to the sturdiness of the structure and
the effectiveness of the hydraulic system,
the backhoe provides significant
Transmission tearout and digging force.
The WB97S-2 is fitted with “Full Power Shift” transmission, which The functional geometry ensures excellent
guarantees permanent traction of the wheels, even during gear changes, dumping height and digging depth, while at
and makes it possible to reach a maximum speed of 40 km/h. the same time guaranteeing minimum
The semiautomatic, electronically-controlled gear selection system is encumbrance on the road and perfect
Maintenance
operated using a knob, in a manner that is simple and intuitive for the visibility of the work area. Performance and
operator. The EGM (Electronic Gear Management) system, which is sturdiness combined with extreme versatility, Checks and routine maintenance on the
available as an option, allows automatic or semiautomatic gear selection. enhanced by the availability of the telescopic KOMATSU backhoe loaders take just
The EGM also manages other important functions, such as: arm or the device to dig beyond the wheel outline, a few minutes, and are extremely simple
• system self-diagnosis as well as the combination of the two. To to perform, without requiring any
• automatic engagement and disengagement of the 4-wheel drive complete all these versatile characteristics, there special equipment.
• activation of the anti-theft alarm system with customised code is also the possibility to fit the machine with a The extended greasing intervals
wide range of buckets and special equipment. reduce unning costs and service times,
Hydraulic System and increase the returns on the investment.
The KOMATSU backhoe loaders are equipped with the consolidated
“Syncro System” hydraulic system. The heart of the system is the variable flow-rate pump
Axles and Brakes
that feeds the exclusive CLSS (Closed Load Sensing System). This system ensures that only
The sturdiness and efficiency of the transmission the power strictly necessary is delivered and used, as well as guaranteeing high operating
are further enhanced by the adoption of efficiency in all conditions. Furthermore, the innovative LIFD distributor
“Heavy-Duty” axles and limited-slip differential (Load Independent Flow Divider) allows the speed of each movement to be completely
on both axles. Maximum operating safety is also independent from that of the others, and the proportionality remains unchanged even when
guaranteed by the excellent braking system, the resisting load changes. Basically, the hydraulic system ensures, as well as excellent
featuring multiple-disk service brakes in oil bath performance, shorter working cycles and thus greater productivity.
with independent circuits activated by two The two operating modes, “Power” and “Economy”, ensure maximum power when required,
separate pedals. or alternatively reduced power to save fuel when performing more general operations
or finishing-off.
4 5 6 7
WB97S-2 B ACKHOE L OADER WB97S-2 B ACKHOE L OADER WB97S-2 B ACKHOE L OADER
LOADER REFILLS
STANDARD EQUIPMENT WB SPECIFICATIONS
The design of the front loader allows an excellent tensile strength
distribution and the upkeep of movement parallelism when lifting and
lowering the bucket. Furthermore, thanks to the linkage geometry the
greasing points have been reduced.
Engine oil ....................................................................................8,6 l
Cooling system ............................................................................18 l
Diesel tank .................................................................................130 l
Hydraulic oil tank..........................................................................92 l
• Turbo STAGE 2 Komatsu engine
• “Full Power Shift” with electronic control
(EGM):
- automatic or semi-automatic selection
•
•
•
•
Road homologation
Lights for road travel
Rotating beacon
Internal and external mirrors
- type of oil for engine, transmission, brakes
and hydraulic system
- routine maintenance operations to be
performed every 500, 1.000 and 2.000 with
97S-2 ENGINE STEERING
Front axle oil ................................................................................13 l - direction and gear indicator • ROPS/FOPS cab with heater and fan partial service hours
Standard bucket width .......................................................2.420 mm The engine has been developed in compliance with the strictest The front and rear steering wheels are controlled by a “Load-Sensing”
Rear axle oil .................................................................................12 l - electronic anti-theft system with code • Tinted glass - language selection (Italian, English, German,
Standard bucket capacity (ISO 7546) ......................................1,1 m3 European standards (97/68/CE - STAGE 2) on the reduction of exhaust hydrostatic power steering system with a priority valve and by an
Gearbox oil...................................................................................16 l • “Kick-down” function • Adjustable steering wheel French, Spanish, Portuguese)
STD bucket weight ..................................................................440 kg emissions. electronic device for the selection of the 3 steering modes.
Lifting capacity • 4 wheel drive • Adjustable seat with safety belt - tyre pressure
Model ......................................................... Komatsu S4D106-2SFA Steering radius, with 4 steering wheels and inner wheel not braked:
at maximum height:..........................................3.820 daN (3.900 kg) • Limited slip differential on both axles • Front and rear windshield wipers - maintenance and warning alarms Type...............................vertical, 4-cycle water-cooled diesel engine loader outer angle ..............................................................4.390 mm
Lifting capacity BACKHOE • 4 wheel steering (3 modes) with electronic • Lockable internal storage compartment • Indicators: transmission oil temperature, 4WD Displacement ......................................................................4412 cm3 outer wheel ........................................................................4.150 mm
at ground level (ISO 8313): ..............................5.195 daN (5.300 kg) alignment • Clothes hook and cup-holder engagement, brake oil level, differential lock,
The main boom has a reinforced structure built with cast ends, allows Cyl. bore x stroke ........................................................106 x 125 mm The values are valid either with 24” and with 28” tyres.
Breakout force (ISO 8313) ...............................6.383 daN (6.500 kg) • Front mudguards • Fully opening bonnet fuel level indicator, hour meter, engine tank
180° rotations, always maintaining high rotation torque. Vertical N° of cylinders..................................................................................4
4x1 bucket width ................................................................2.440 mm
outriggers with adjustable wear device. • Declutch switch • Air cleaner, dry type, radial seal with clogging reservoir, preheating, engine speed, engine Compression ratio....................................................................17,5:1
4x1 bucket capacity (ISO 7546).............................................1,03 m3
• Foot pedal and hand control accelerator indicator and safety internal filter coolant temperature, engine oil pressure, air Combustion..........................................................direct injection (DI)
Bucket breakout force (ISO 6015)....................5.780 daN (5.900 kg) • Horn • Fuel filter with water separator filter clogging Aspiration......................................................................turbocharged
Arm breakout force (ISO 6015) ........................3.780 daN (3.850 kg) • Maintenance-free battery 155 Ah • “Load sensing”, variable displacement • Front counterweight (300 kg) Gross power .........................................................................74,5 kW
TRANSMISSION
Maximum rated power:
• 12V external electric plug axial pump
(SAE J 1349) ........................................73 kW / 97,8 HP / 2.200 rpm Electronically-controlled, four-wheel drive, “Full Power Shift”
• 12V power outlet in the cab • Multiple function digital display showing: (80/1269/EC) ........................................72 kW / 96,5 HP / 2.200 rpm transmission. EGM (Electronic Gear Management) gear controls for
• Antifreeze (-36°C) - front and rear axle alignment Max torque .........................................................378 Nm - 1.600 rpm changing driving direction and gears, in automatic or semi-automatic
• Front and rear working lights - speedometer (km/h or mph)
Dimensions Cooling system ......................................................................radiator
Air filter ..................................................dry filter with safety element
mode (using two buttons), at full power without disengaging the drive.
Other functions incorporated: system self-diagnosis, automatic
LOADER Starting system ..................................electric motor with pre-heating connection/disconnection of the four-wheel drive, and activation of
• Speed-Up • Lifting cylinder safety lock • General purpose bucket with bolted teeth air system for cold climate the anti-theft alarm using a PIN code.
Q
M BACKHOE Travelling speed:
GEAR FORWARD REVERSE
• Electro-hydraulic backhoe shifting lock • Backhoe swing transport lock • Electro-hydraulic backhoe slide frame
WB97S-2
release lock OPERATING WEIGHT 1st 6,5 6,5
2nd 12 12
Standard machine operating weight.....................................8.190 kg
Total machine weight............................................................9.030 kg 3rd 23 23
4th 40 -
operating weight increase
F
OPTIONAL EQUIPMENT 4x1 bucket...............................................................................250 kg
offset boom .............................................................................150 kg
A
O
E telescopic arm .........................................................................260 kg
BB
B
N
• PPC proportional servo controls • Cold area arrangement (-30°C) and • Hydraulic biodegradable oil pallet forks...............................................................................200 kg AXLES
C
D
• Battery disconnection safety switch • Fuel filling pump Front axle total oscillation angle 16°.
J • De-Luxe seat with 3” retractable safety belt Limited slip differential on both axles.
• Drive shaft guard (front) • Rubber pads for stabilisers • Additional toolbox HYDRAULIC SYSTEM
H
• Optional tyres • Hose burst valves: • Additional rear view mirror (right) Max front strength (Dynamic) ............................................8.000 daN
I K L - loader arm • Radio SyncroSystem hydraulics allows the operator very precise and
• Bumper Max rear strength (Dynamic)...........................................10.000 daN
- backhoe • Backup alarm simultaneous movements. This system is energy efficient and
• Cold area arrangement (-22°C) incorporates two different working modes: Power and Economy.
P
- stabilisers
The advanced hydraulic system includes also the function “Speed
S
• LSS (Load Stabiliser System) • Attachments: - 4x1 bucket (for quick hitch) System........................................................................SyncroSystem
• Auxiliary hydraulic circuits: - bolt-on cutting edge - angle-dozer blade (for quick hitch) Type............................................Close Load Sensing System CLSS Oil immersed disc brakes are actuated by individual braking on each
- auxiliary 3rd spool valve with floating function - cutting edge on teeth Pumps type ................................Variable displacement axial pistons rear wheel with 2 separate pedals. Total integral braking (4° gear) on
Pumps control system..................................................Load Sensing the 4 wheels is activated by operating the two pedals at the same
- auxiliary 3rd spool valve with floating function - 4x1 bucket
Main Valve (backhoe)............LIFD (Load Independent Flow Divider) time.
U and “Return-To-Dig” - flip-over forks on 4x1 bucket modular type
T
V R - front auxiliary hydraulic circuit - hydraulic and mechanic quick hitch Max delivery........................................................................165 l/min
Z
LOADER REFILLS
STANDARD EQUIPMENT WB SPECIFICATIONS
97S-2
The design of the front loader allows an excellent tensile strength Engine oil ....................................................................................8,6 l • Turbo STAGE 2 Komatsu engine • Road homologation - type of oil for engine, transmission, brakes
distribution and the upkeep of movement parallelism when lifting and Cooling system ............................................................................18 l • “Full Power Shift” with electronic control • Lights for road travel and hydraulic system
lowering the bucket. Furthermore, thanks to the linkage geometry the Diesel tank .................................................................................130 l (EGM): • Rotating beacon - routine maintenance operations to be
greasing points have been reduced. Hydraulic oil tank..........................................................................92 l - automatic or semi-automatic selection • Internal and external mirrors performed every 500, 1.000 and 2.000 with ENGINE STEERING
Front axle oil ................................................................................13 l - direction and gear indicator • ROPS/FOPS cab with heater and fan partial service hours
Standard bucket width .......................................................2.420 mm The engine has been developed in compliance with the strictest The front and rear steering wheels are controlled by a “Load-Sensing”
Rear axle oil .................................................................................12 l - electronic anti-theft system with code • Tinted glass - language selection (Italian, English, German,
Standard bucket capacity (ISO 7546) ......................................1,1 m3 European standards (97/68/CE - STAGE 2) on the reduction of exhaust hydrostatic power steering system with a priority valve and by an
STD bucket weight ..................................................................440 kg Gearbox oil...................................................................................16 l • “Kick-down” function • Adjustable steering wheel French, Spanish, Portuguese) emissions. electronic device for the selection of the 3 steering modes.
Lifting capacity • 4 wheel drive • Adjustable seat with safety belt - tyre pressure
Model ......................................................... Komatsu S4D106-2SFA Steering radius, with 4 steering wheels and inner wheel not braked:
at maximum height: ..........................................3.820 daN (3.900 kg) • Limited slip differential on both axles • Front and rear windshield wipers - maintenance and warning alarms Type...............................vertical, 4-cycle water-cooled diesel engine loader outer angle ..............................................................4.390 mm
Lifting capacity BACKHOE • 4 wheel steering (3 modes) with electronic • Lockable internal storage compartment • Indicators: transmission oil temperature, 4WD Displacement ......................................................................4412 cm3 outer wheel ........................................................................4.150 mm
at ground level (ISO 8313): ..............................5.195 daN (5.300 kg) alignment • Clothes hook and cup-holder engagement, brake oil level, differential lock,
The main boom has a reinforced structure built with cast ends, allows Cyl. bore x stroke ........................................................106 x 125 mm The values are valid either with 24” and with 28” tyres.
Breakout force (ISO 8313) ...............................6.383 daN (6.500 kg) • Front mudguards • Fully opening bonnet fuel level indicator, hour meter, engine tank
180° rotations, always maintaining high rotation torque. Vertical N° of cylinders..................................................................................4
4x1 bucket width ................................................................2.440 mm
outriggers with adjustable wear device. • Declutch switch • Air cleaner, dry type, radial seal with clogging reservoir, preheating, engine speed, engine Compression ratio ....................................................................17,5:1
4x1 bucket capacity (ISO 7546) .............................................1,03 m3
• Foot pedal and hand control accelerator indicator and safety internal filter coolant temperature, engine oil pressure, air Combustion ..........................................................direct injection (DI)
Bucket breakout force (ISO 6015)....................5.780 daN (5.900 kg) • Horn • Fuel filter with water separator filter clogging Aspiration ......................................................................turbocharged
Arm breakout force (ISO 6015) ........................3.780 daN (3.850 kg) • Maintenance-free battery 155 Ah • “Load sensing”, variable displacement • Front counterweight (300 kg) Gross power .........................................................................74,5 kW
TRANSMISSION
Maximum rated power:
• 12V external electric plug axial pump
(SAE J 1349) ........................................73 kW / 97,8 HP / 2.200 rpm Electronically-controlled, four-wheel drive, “Full Power Shift”
• 12V power outlet in the cab • Multiple function digital display showing: (80/1269/EC) ........................................72 kW / 96,5 HP / 2.200 rpm transmission. EGM (Electronic Gear Management) gear controls for
• Antifreeze (-36°C) - front and rear axle alignment Max torque .........................................................378 Nm - 1.600 rpm changing driving direction and gears, in automatic or semi-automatic
• Front and rear working lights - speedometer (km/h or mph)
Dimensions Cooling system ......................................................................radiator
Air filter ..................................................dry filter with safety element
mode (using two buttons), at full power without disengaging the drive.
Other functions incorporated: system self-diagnosis, automatic
LOADER Starting system ..................................electric motor with pre-heating connection/disconnection of the four-wheel drive, and activation of
• Speed-Up • Lifting cylinder safety lock • General purpose bucket with bolted teeth air system for cold climate the anti-theft alarm using a PIN code.
Q
BACKHOE Travelling speed:
M
GEAR FORWARD REVERSE
• Electro-hydraulic backhoe shifting lock • Backhoe swing transport lock • Electro-hydraulic backhoe slide frame
WB97S-2
release lock OPERATING WEIGHT 1st 6,5 6,5
2nd 12 12
Standard machine operating weight.....................................8.190 kg
Total machine weight............................................................9.030 kg 3rd 23 23
4th 40 -
operating weight increase
F OPTIONAL EQUIPMENT 4x1 bucket ...............................................................................250 kg
offset boom..............................................................................150 kg
telescopic arm .........................................................................260 kg
A
E O
BB
• Cold area arrangement (-30°C) and • Hydraulic biodegradable oil pallet forks ...............................................................................200 kg AXLES
B
• Air Conditioning
• TÜV + TBG version (20 km/h or 40 km/h) • Air cyclone pre-filter “Heavy-duty” axles with planetary reduction gears in the wheel hubs.
• Additional front counterweight (170 kg) Front axle total oscillation angle 16°.
• Battery disconnection safety switch • Fuel filling pump
G
J • De-Luxe seat with 3” retractable safety belt Limited slip differential on both axles.
• Drive shaft guard (front) • Rubber pads for stabilisers • Additional toolbox HYDRAULIC SYSTEM
H
• Optional tyres • Hose burst valves: • Additional rear view mirror (right) Max front strength (Dynamic) ............................................8.000 daN
I K L - loader arm • Radio SyncroSystem hydraulics allows the operator very precise and Max rear strength (Dynamic) ...........................................10.000 daN
• Bumper
- backhoe • Backup alarm simultaneous movements. This system is energy efficient and
• Cold area arrangement (-22°C) incorporates two different working modes: Power and Economy.
- stabilisers
P
• LSS (Load Stabiliser System) • Attachments: - 4x1 bucket (for quick hitch)
• Auxiliary hydraulic circuits: - bolt-on cutting edge - angle-dozer blade (for quick hitch) Type............................................Close Load Sensing System CLSS Oil immersed disc brakes are actuated by individual braking on each
- auxiliary 3rd spool valve with floating function - cutting edge on teeth Pumps type ................................Variable displacement axial pistons rear wheel with 2 separate pedals. Total integral braking (4° gear) on
Pumps control system..................................................Load Sensing the 4 wheels is activated by operating the two pedals at the same
- auxiliary 3rd spool valve with floating function - 4x1 bucket
Main Valve (backhoe)............LIFD (Load Independent Flow Divider) time.
and “Return-To-Dig” - flip-over forks on 4x1 bucket modular type
U T - front auxiliary hydraulic circuit - hydraulic and mechanic quick hitch
V Max delivery........................................................................165 l/min Disc diameter ........................................................................270 mm
R
Z
W - additional front auxiliary hydraulic circuit - forks (for quick hitch) Working pressure...................................................................200 bar Total friction area................................................................2.310 cm2
(6-way valve) - gen. purpose bucket (for quick hitch) The parking or safety brake acts on the service brakes through a
YY Y hand operated lever.
BACKHOE
A. max height ................................................................4.220 mm P. digging depth SAE ....................................................4.500 mm • Alternative control pattern hydraulic swing) - range of buckets (300 mm ÷ 900 mm)
B. pin height ..................................................................3.440 mm - with extended telescopic ........................................5.650 mm ELECTRIC SYSTEM
• Auxiliary hydraulic circuits: • Offset boom - ditch cleaning bucket (1.400 mm)
BB. forks loading max height...........................................3.200 mm Q. reach at max height ..................................................2.500 mm TYRES
C. cab height .................................................................2.810 mm - with extended telescopic ........................................3.500 mm - hammer aux. circuit • Telescopic arm - ditch digging bucket (1.000 mm)
The electric system is easily accessible and protected: connections
D. max dumping height .................................................2.750 mm - with extended off-set ..............................................2.510 mm - auger aux. circuit • Offset boom with telescopic arm - hydraulic hammer are sealed and waterproof, and comply with the strictest international Standard: ...............................................................16.9 x 24 - 12 PR
E. max dumping reach (45°) ............................................750 mm R. max reach from swing centre....................................5.550 mm - 2-way aux. circuit for hydraulic attachments • Attachments: safety rules. Option: ...................................................................16.9 x 28 - 12 PR
F. dumping angle.....................................................................45° - with extended telescopic ........................................6.550 mm (including clamshell bucket with - mechanical quick hitch (for std buckets) 16.9 x 28 radial tyres
G. rollback angle ......................................................................45° S. max digging depth ....................................................4.950 mm Voltage........................................................................................12 V
H. digging depth ...............................................................110 mm
I. bucket reach (in transport)........................................1.930 mm
J. ground clearance .........................................................470 mm
- with telescopic ........................................................6.100 mm
T. digging reach ............................................................2.750 mm
U. rear tread ..................................................................1.950 mm
WB97S-2 Battery ....................................................................................155 Ah
Alternator ....................................................................................80 A
Starter ........................................................................................3 kW
K. wheel base................................................................2.175 mm V. front tread .................................................................1.950 mm CAB
NET POWER
L. backhoe swing centre distance.................................1.320 mm
M. transport length.........................................................5.895 mm
N. dumping height SAE .................................................3.700 mm
W. overall width (with bucket) ....................................... 2.420 mm
X. transport hoe height..................................................3.660 mm
- with telescopic ........................................................3.700 mm
Komatsu Utility Europe
Head Office
4 -W HEEL S TEERING SAE J1349
ROPS (ISO 9249, SAEJ1040) and FOPS (ISO 3449, SAEJ 231) cab
designed in order to offer the best visibility, ergonomy, low noise and
via Atheste 4 73 kW - 97,8 HP comfort. Two doors, full opening rear windows with front and rear
max dumping height .................................................3.950 mm
- with extended telescopic SAE ................................4.830 mm
- with off-set ..............................................................3.760 mm
Y. side shift.......................................................................605 mm
35042 Este (Padova) - Italy
Tel. +39 0429 616111
B AC K H O E L OA D E R OPERATING WEIGHT
FRAME
The frame is modular and has been developed for computer based
windscreen wipers. Internal lay out includes full adjustable seat, fresh
filtered air intake ventilation and easy to read front and side dash
- with extended telescopic max.................................5.050 mm YY. side shift with off-set ..................................................1.080mm Fax +39 0429 601000 welding processes; every main element is bolted directly to the frame board.
O. max digging height....................................................5.510 mm Z. telescopic stroke .......................................................1.150 mm www.equipmentcentral.com From 8.190 kg
to improve maintenance and to reduce down time.
- with extended telescopic ........................................6.510 mm utility@komatsu.it to 9.030 kg
- Values with 16.9 x 24 tyres
LOADER REFILLS
STANDARD EQUIPMENT WB SPECIFICATIONS
97S-2
The design of the front loader allows an excellent tensile strength Engine oil ....................................................................................8,6 l • Turbo STAGE 2 Komatsu engine • Road homologation - type of oil for engine, transmission, brakes
distribution and the upkeep of movement parallelism when lifting and Cooling system ............................................................................18 l • “Full Power Shift” with electronic control • Lights for road travel and hydraulic system
lowering the bucket. Furthermore, thanks to the linkage geometry the Diesel tank .................................................................................130 l (EGM): • Rotating beacon - routine maintenance operations to be
greasing points have been reduced. Hydraulic oil tank..........................................................................92 l - automatic or semi-automatic selection • Internal and external mirrors performed every 500, 1.000 and 2.000 with ENGINE STEERING
Front axle oil ................................................................................13 l - direction and gear indicator • ROPS/FOPS cab with heater and fan partial service hours
Standard bucket width .......................................................2.420 mm The engine has been developed in compliance with the strictest The front and rear steering wheels are controlled by a “Load-Sensing”
Rear axle oil .................................................................................12 l - electronic anti-theft system with code • Tinted glass - language selection (Italian, English, German,
Standard bucket capacity (ISO 7546) ......................................1,1 m3 European standards (97/68/CE - STAGE 2) on the reduction of exhaust hydrostatic power steering system with a priority valve and by an
STD bucket weight ..................................................................440 kg Gearbox oil...................................................................................16 l • “Kick-down” function • Adjustable steering wheel French, Spanish, Portuguese) emissions. electronic device for the selection of the 3 steering modes.
Lifting capacity • 4 wheel drive • Adjustable seat with safety belt - tyre pressure
Model ......................................................... Komatsu S4D106-2SFA Steering radius, with 4 steering wheels and inner wheel not braked:
at maximum height: ..........................................3.820 daN (3.900 kg) • Limited slip differential on both axles • Front and rear windshield wipers - maintenance and warning alarms Type...............................vertical, 4-cycle water-cooled diesel engine loader outer angle ..............................................................4.390 mm
Lifting capacity BACKHOE • 4 wheel steering (3 modes) with electronic • Lockable internal storage compartment • Indicators: transmission oil temperature, 4WD Displacement ......................................................................4412 cm3 outer wheel ........................................................................4.150 mm
at ground level (ISO 8313): ..............................5.195 daN (5.300 kg) alignment • Clothes hook and cup-holder engagement, brake oil level, differential lock,
The main boom has a reinforced structure built with cast ends, allows Cyl. bore x stroke ........................................................106 x 125 mm The values are valid either with 24” and with 28” tyres.
Breakout force (ISO 8313) ...............................6.383 daN (6.500 kg) • Front mudguards • Fully opening bonnet fuel level indicator, hour meter, engine tank
180° rotations, always maintaining high rotation torque. Vertical N° of cylinders..................................................................................4
4x1 bucket width ................................................................2.440 mm
outriggers with adjustable wear device. • Declutch switch • Air cleaner, dry type, radial seal with clogging reservoir, preheating, engine speed, engine Compression ratio ....................................................................17,5:1
4x1 bucket capacity (ISO 7546) .............................................1,03 m3
• Foot pedal and hand control accelerator indicator and safety internal filter coolant temperature, engine oil pressure, air Combustion ..........................................................direct injection (DI)
Bucket breakout force (ISO 6015)....................5.780 daN (5.900 kg) • Horn • Fuel filter with water separator filter clogging Aspiration ......................................................................turbocharged
Arm breakout force (ISO 6015) ........................3.780 daN (3.850 kg) • Maintenance-free battery 155 Ah • “Load sensing”, variable displacement • Front counterweight (300 kg) Gross power .........................................................................74,5 kW
TRANSMISSION
Maximum rated power:
• 12V external electric plug axial pump
(SAE J 1349) ........................................73 kW / 97,8 HP / 2.200 rpm Electronically-controlled, four-wheel drive, “Full Power Shift”
• 12V power outlet in the cab • Multiple function digital display showing: (80/1269/EC) ........................................72 kW / 96,5 HP / 2.200 rpm transmission. EGM (Electronic Gear Management) gear controls for
• Antifreeze (-36°C) - front and rear axle alignment Max torque .........................................................378 Nm - 1.600 rpm changing driving direction and gears, in automatic or semi-automatic
• Front and rear working lights - speedometer (km/h or mph)
Dimensions Cooling system ......................................................................radiator
Air filter ..................................................dry filter with safety element
mode (using two buttons), at full power without disengaging the drive.
Other functions incorporated: system self-diagnosis, automatic
LOADER Starting system ..................................electric motor with pre-heating connection/disconnection of the four-wheel drive, and activation of
• Speed-Up • Lifting cylinder safety lock • General purpose bucket with bolted teeth air system for cold climate the anti-theft alarm using a PIN code.
Q
BACKHOE Travelling speed:
M
GEAR FORWARD REVERSE
• Electro-hydraulic backhoe shifting lock • Backhoe swing transport lock • Electro-hydraulic backhoe slide frame
WB97S-2
release lock OPERATING WEIGHT 1st 6,5 6,5
2nd 12 12
Standard machine operating weight.....................................8.190 kg
Total machine weight............................................................9.030 kg 3rd 23 23
4th 40 -
operating weight increase
F OPTIONAL EQUIPMENT 4x1 bucket ...............................................................................250 kg
offset boom..............................................................................150 kg
telescopic arm .........................................................................260 kg
A
E O
BB
• Cold area arrangement (-30°C) and • Hydraulic biodegradable oil pallet forks ...............................................................................200 kg AXLES
B
• Air Conditioning
• TÜV + TBG version (20 km/h or 40 km/h) • Air cyclone pre-filter “Heavy-duty” axles with planetary reduction gears in the wheel hubs.
• Additional front counterweight (170 kg) Front axle total oscillation angle 16°.
• Battery disconnection safety switch • Fuel filling pump
G
J • De-Luxe seat with 3” retractable safety belt Limited slip differential on both axles.
• Drive shaft guard (front) • Rubber pads for stabilisers • Additional toolbox HYDRAULIC SYSTEM
H
• Optional tyres • Hose burst valves: • Additional rear view mirror (right) Max front strength (Dynamic) ............................................8.000 daN
I K L - loader arm • Radio SyncroSystem hydraulics allows the operator very precise and Max rear strength (Dynamic) ...........................................10.000 daN
• Bumper
- backhoe • Backup alarm simultaneous movements. This system is energy efficient and
• Cold area arrangement (-22°C) incorporates two different working modes: Power and Economy.
- stabilisers
P
• LSS (Load Stabiliser System) • Attachments: - 4x1 bucket (for quick hitch)
• Auxiliary hydraulic circuits: - bolt-on cutting edge - angle-dozer blade (for quick hitch) Type............................................Close Load Sensing System CLSS Oil immersed disc brakes are actuated by individual braking on each
- auxiliary 3rd spool valve with floating function - cutting edge on teeth Pumps type ................................Variable displacement axial pistons rear wheel with 2 separate pedals. Total integral braking (4° gear) on
Pumps control system..................................................Load Sensing the 4 wheels is activated by operating the two pedals at the same
- auxiliary 3rd spool valve with floating function - 4x1 bucket
Main Valve (backhoe)............LIFD (Load Independent Flow Divider) time.
and “Return-To-Dig” - flip-over forks on 4x1 bucket modular type
U T - front auxiliary hydraulic circuit - hydraulic and mechanic quick hitch
V Max delivery........................................................................165 l/min Disc diameter ........................................................................270 mm
R
Z
W - additional front auxiliary hydraulic circuit - forks (for quick hitch) Working pressure...................................................................200 bar Total friction area................................................................2.310 cm2
(6-way valve) - gen. purpose bucket (for quick hitch) The parking or safety brake acts on the service brakes through a
YY Y hand operated lever.
BACKHOE
A. max height ................................................................4.220 mm P. digging depth SAE ....................................................4.500 mm • Alternative control pattern hydraulic swing) - range of buckets (300 mm ÷ 900 mm)
B. pin height ..................................................................3.440 mm - with extended telescopic ........................................5.650 mm ELECTRIC SYSTEM
• Auxiliary hydraulic circuits: • Offset boom - ditch cleaning bucket (1.400 mm)
BB. forks loading max height...........................................3.200 mm Q. reach at max height ..................................................2.500 mm TYRES
C. cab height .................................................................2.810 mm - with extended telescopic ........................................3.500 mm - hammer aux. circuit • Telescopic arm - ditch digging bucket (1.000 mm)
The electric system is easily accessible and protected: connections
D. max dumping height .................................................2.750 mm - with extended off-set ..............................................2.510 mm - auger aux. circuit • Offset boom with telescopic arm - hydraulic hammer are sealed and waterproof, and comply with the strictest international Standard: ...............................................................16.9 x 24 - 12 PR
E. max dumping reach (45°) ............................................750 mm R. max reach from swing centre....................................5.550 mm - 2-way aux. circuit for hydraulic attachments • Attachments: safety rules. Option: ...................................................................16.9 x 28 - 12 PR
F. dumping angle.....................................................................45° - with extended telescopic ........................................6.550 mm (including clamshell bucket with - mechanical quick hitch (for std buckets) 16.9 x 28 radial tyres
G. rollback angle ......................................................................45° S. max digging depth ....................................................4.950 mm Voltage........................................................................................12 V
H. digging depth ...............................................................110 mm
I. bucket reach (in transport)........................................1.930 mm
J. ground clearance .........................................................470 mm
- with telescopic ........................................................6.100 mm
T. digging reach ............................................................2.750 mm
U. rear tread ..................................................................1.950 mm
WB97S-2 Battery ....................................................................................155 Ah
Alternator ....................................................................................80 A
Starter ........................................................................................3 kW
K. wheel base................................................................2.175 mm V. front tread .................................................................1.950 mm CAB
NET POWER
L. backhoe swing centre distance.................................1.320 mm
M. transport length.........................................................5.895 mm
N. dumping height SAE .................................................3.700 mm
W. overall width (with bucket) ....................................... 2.420 mm
X. transport hoe height..................................................3.660 mm
- with telescopic ........................................................3.700 mm
Komatsu Utility Europe
Head Office
4 -W HEEL S TEERING SAE J1349
ROPS (ISO 9249, SAEJ1040) and FOPS (ISO 3449, SAEJ 231) cab
designed in order to offer the best visibility, ergonomy, low noise and
via Atheste 4 73 kW - 97,8 HP comfort. Two doors, full opening rear windows with front and rear
max dumping height .................................................3.950 mm
- with extended telescopic SAE ................................4.830 mm
- with off-set ..............................................................3.760 mm
Y. side shift.......................................................................605 mm
35042 Este (Padova) - Italy
Tel. +39 0429 616111
B AC K H O E L OA D E R OPERATING WEIGHT
FRAME
The frame is modular and has been developed for computer based
windscreen wipers. Internal lay out includes full adjustable seat, fresh
filtered air intake ventilation and easy to read front and side dash
- with extended telescopic max.................................5.050 mm YY. side shift with off-set ..................................................1.080mm Fax +39 0429 601000 welding processes; every main element is bolted directly to the frame board.
O. max digging height....................................................5.510 mm Z. telescopic stroke .......................................................1.150 mm www.equipmentcentral.com From 8.190 kg
to improve maintenance and to reduce down time.
- with extended telescopic ........................................6.510 mm utility@komatsu.it to 9.030 kg
- Values with 16.9 x 24 tyres