Sei sulla pagina 1di 14



   

LC
Cooling capacity : 260 to 500 kW

 
  
  

 

  

 
 
  


 
 

1.

Cooling only Hydraulic Heating


pack recovery

USE
   
Air cooled water chillers CIATCOOLER LC with CIAT fan coil These units are equipped with recovery water condenser for hot
units and air handling units allow to answer to any air water heating supply.
conditioning applications and industrial process. This design is very interesting for chillers running all the year
These compact and packaged units are designed for outdoor and allows to save energy.
installation with high external air temperature operation.  

Air cooled water chillers CIATCOOLER LCH are designed with


integrated hydraulic equipment (buffer, tank, expansion vessel,
hydraulic pump, valves, ...).
This design allows an easy installation, a space saving and a
time saving for installation.
A large selection of pumps is available for any head pressure.

RANGE
   
H Units conform to regulations :
EN60-204 – EN 378-2
8 models : 1203Z - 1400Z - 1600Z - 1803Z - 1804Z - 2000Z -
2200Z - 2400Z H Units conform to directives :
– 98/37 CEE
H CONFIGURATION – CEM (89/336 CEE) modified 92/31 CEE - 93/68 CEE
– Low voltage (73/23 CEE) modified 93/68 CEE
a - STANDARD version - ventilation 905 rpm – DESP 97/23/CE
b - LOW NOISE version - ventilation 715 rpm+ compressors Group 3 models LC-LCH 1203Z to 2400Z / LCT 1203Z
phonic insulation Group 4 models LCT 1400Z to 2400Z

AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C 


    
LC
DESCRIPTION
  n % &'       ! ( 
#) ( #!  *
n        
H Reciprocating. – Chilled water temperature control.
H Pressure lubrication controlled by a differential pressostat. – Operating parameters control.
H Integral electronic protection of motor. – Faults diagnosis.
H Mounting on antivibration mounts.
– Counting and balancing of compressors running times.
 

n   ! "  – Chilled water temperature display.


H Direct expansion.


– RS485 output for bus connection.


H Copper tubes bundle, steel shell.
H Corrosion resistant baffles. n     (
H Thermal insulation with polyurethane foam. Frame and casing in galvanised steel sheet.
n   
H ”U” condensing coils, copper tubes, alluminium fins.
 

H propeller fans, direct drive 930 or 730 rpm. H Identical to CIATCOOLER LC but with a complete integrated
hydraulic equipment.
n   H 1 buffer tank with thermal insulation.
H Filter dryers.
H 1 centrifugal single or twin pump.
H Liquid sight glasses.
H 1 expansion vessel.
H Solenoïd valves on liquid line.
H Thermostatic expansion valves. H 1 automatic air vent.
H 1 safety valve (4 bars).
n    #$
H 1 filling hole with valves.
H High and low pressure safety pressostats.
H Oil differential pressostats. H 1 draining hole with valve.
H Chilled water and antifreeze sensors. H 1 set of shut off valves.
H Evaporator water flow switch. H pumps contactors and protections.

n     


H Electrical supply 400 V - 3 ph - 50 Hz + Earth ($5 %) Identical to CIATCOOLER LC but with recovery water
H Main safety switch with external handle. condensers.
H Remote control transformer. H 1 shell and tubes water cooled condenser on each refrigerant
H Power and control circuits protection. circuit with polyurethane foam insulation and antifreeze
protection.
H Contactors and circuit breakers for compressors and fan
motors. H 1 refrigerant liquid receiver per circuit

OPTIONS
n )   "   n $!   (  #   -./0
1     
n  "    +! 
n    2
H Anti-vibration mounts
n    $   3 
H Evaporator flexible sleeves
n       ( 
n  !  (!(
n )  !  ($ ) 4 5
H 1 HP gauge per circuit
H 1 LP gauge per circuit n 6 ( ! ( #   

H 1 oil pressure manometer per compressor n   !   ( ""

n   !$ n  #2  " 45

H 230V - 3 ph - 50 Hz + earth n  # 7    4 


5
n  $ !    4 
5
n   )  (    ,    (
n - 7  !   4 
5
n      !  4   # (   ! 5
n    $!    ( n /$ ) 2  " 4
5

 AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C


    

LC
TECHNICAL CHARACTERISTICS
  
98: '99: ;99: <98: <9': 999: 99: '99:

Cooling capacity (1) kW         
Standard version
Electrical consumption (2) kW











Cooling capacity (1) kW  



 
  
Low Noise version
Electrical consumption (2) kW










 
Cooling capacity (3) kW         
Recovery version


Compressor electrical consumption kW 








Type  

Number  

Rotation speed rpm




R407C refrigerant charge LC - LCH  


      
kg
Compressor R407C refrigerant charge LCT 
 


 
 


 










Capacity control %
  
     

Type of oil for R407C    !"  ""

  #    #  
Oil charge for compressor liters   #   #   #   #
#  #

Type $  % %& '' ( )* %

Number

Water capacity liters 



Evaporator
Hydraulic connection +,-.

Maximum pressure on water side bar




Maximum water flow m3/h 




Fans $  (/  ''  0   11 (1  

Number of fans 


Rotation speed rpm  1 .!,$ $ / %

Air flow m3/h







 


Air cooled
condenser
Motor power kW
#

Rotation speed rpm  1 2 ,. / %

Air flow m3/h  












Motor power kW #

Number 
Shell
Sh ll and
d tubes
t b
water condenser Water capacity liters

      
LCT
Maximum water flow m3/h







Tank capacity liters




Hydraulic
H d li
equipment
q p Pure water expansion vessel liters  
LCH
Glycol water expansion vessel liters
 3 4

Standard version Lw / Lp (4) dB(A) 5 5


5 5
5

Low Noise version Lw / Lp (4) dB(A) 5 5 5 5 5

 "'  0 6


 5 °" &'' ( 7  ( °"  '   1 )
 "1 %%%  6% '  ' %)1
 "'  0 6
 5 °" &'' ( 7  ( °" & 7  )'   1 )
  -'*' %)( 7  ' / '

-'*' %)(  %%) ' / ' 
 1  %8  6 6 '(8 6''7 .   )'

AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C 8


    
LC
ELECTRICAL CHARACTERISTICS
  
98: '99: ;99: <98: <9': 999: 99: '99:

Maximum nominal current (1) A        
Compressor
Starting current direct on line (3) A  
    
  

930 rpm standard version Maximum # # 


Fans motors nominal A
730 rpm standard version current (1)
# # 
 

LC antifreeze Evaporator heating element power W  


protection


(option) Maximum nominal current (2) A


#

#
Evaporator heating element power
LCH antifreeze W
  
+ tank immersion heater
protection
(option) Maximum nominal current (4) A # #
#


LCT antifreeze Condenser heating element power W  3
4  3
4   34
3
4
protection
(option)
Maximum nominal current (2) A
#
#
# #
Control auxiliary
circuit
Maximum nominal current (2) A 

SINGLE PUMPS (LCH ONLY) 102 103 104 105 106 107 108 109 110 112

TWIN PUMPS (LCH ONLY) 202 203 204 205 206 207 208 209 210 212

Power KW    # # # #



Maximum nominal current (1) A # # #
#
#
#
# # # #
3
4 ")  6  9   &   :; /'
34 ")  6  9 
&   :; /'
34 . )  6 & * % 1 %%  11)1 )  6 & % 1 %%%  6)'' '(
,1' )  6 *' % % '  < (( & 11)1 1' ) % (  (  & */ *' %
34  9   &   :; /' 6 = 11 % &   (  9 
&   :; /' 6 / &  ' 1 

NOTES
............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

' AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C


    

LC
PERFORMANCES
   
4>89  #5

CONDENSER AIR INLET TEMPERATURE _C


 Evaporator
 water outlet
< 8 8; '9

temperature _C C Pf Pa Pf Pa Pf Pa Pf Pa
kW kW kW kW kW kW kW kW
>  
    

 
Glycol water*
water >         
         


98:          
Pure water         



 
 
 

>   
  
Glycol water*
water > 
      
   
    

'99:     


  

Pure water  
 
 
 



 
 

 


>      
Glycol water*
water >       

  
 
  
 


;99:  
 

 

Pure water   

 

 
 


 
 
 

 

?
9?

>   





Glycol water*
water >  
 
 
 


'9?

 

 


 

<98:   


 



'9

Pure water   
 

 
 



  
 
 

'

> 
 
 

Glycol water*
water >  
 

 

 


 

 
  
 

<9':  
  
 
 

Pure water  

 
  
 


 
  
 

>  

 

 


Glycol water*
water > 

  


 

  
 
 
 

999:  
  

 
 

Pure water  
 
  
 


 
 
 

> 

 
 

Glycol water*
water > 
 


  

 


  
 

99:   
 
 
 

Pure water   
  
 
 


 


 

> 
 
 

Glycol water*
water > 
 
 
 

 
 


 

'99:  
 
 
 

Pure water  


 
  


 

  

?6 @ "'  0 /'( 6  !  (    '1%  -'0 ' 7  %  %%0
? @ "1 %% *%* ( 7   '7  1 )  %%0 3'0 /'*' 6 ""! / %%4

AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C =


    
LC
PERFORMANCES
 
CONDENSER WATER OUTLET TEMPERATURE _C
Evaporator water '9 '=
 outlet
temperature _C Pf Pa Pc Pf Pa Pc
kW kW kW kW kW kW
>    
   
Glycol water*
 

       

98:


      


Pure water        


    




>      

Glycol water*
   
  


'99:       
 

Pure water     


 


 
   



>       


Glycol water*
 

  
 

;99:  

  
 

Pure water   

   
 
?
9?


 
  
 

> 
  
 

9?

Glycol water*
 

 
 
 

<98:   

  
 
'9

Pure water  


   
  
'


 

 
 

> 
  

 
Glycol water*
 

 

 


<9':
<9':  
 

 

Pure water  


  
 



  
   
 

> 

  
 
Glycol water*
 
  
 

999:  
  




Pure water  
  
 


 
  
 

> 
 
 
 
Glycol water*
 

 
 

99:   
  
 

Pure water  

 
 



 
  



> 
  
 
Glycol water*
 
  
 

'99:  

  
 

Pure water  
   
 


 

 

?6 @ "'  0 /'( 6  !  (    '1%  -'0 ' 7  %  %%0
? @ "1 %% *%* ( 7   '7  1 )  %%0 3'0 /'*' 6 ""! / %%4
? @ "'  0 /'( 6  !  (    '1%

; AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C


    

LC
OPERATING LIMITS IN FULL LOAD
CIATCOOLER LC - LCH LCT
Air cooled condenser
D Mini. _C + 12* – 15
D Maxi _C 40 40

Water cooled condenser NO


D nT mini. _C 5
D nT maxi _C 10

 
D Max. hot water outlet _C 50


Water cooled condenser
Depending of the chilled water outlet
D nT mini. _C See graph below
D nT maxi. _C
A 
 " %(( / %
>
 " 7& '' 0  )(  

EVAPORATOR LIMITS
The curves below represent the minimum and maximun allowable temperature difference of the glycol or chilled water depending
upon the outlet temperature.

2  '0 '



+  7  )'  @   _"
1)1 ! @ #
_" 2   1# @ #
5  _"
1)1 ! @ # _" 2   1# @

# 5  _"
+  1 ) (66   %   ')( ( * 7  &  )/ %8 %)' )%#

WATER GLYCOL CŒFFICIENTS


H 30 % concentration of glycol weight
H Freezing point of the solution : –16 _C.

POSITIVE TEMPERATURE NEGATIVE TEMPERATURE


CORRECTION
K Calculation K Calculation
Cooling capacity 0.98 Pfc = Pf x 0.98 1.00 See selection table
porator
or

Qc = Pfc x 0.86 x 1.05 Qc = Pfc x 0.86 x 1.10


Chilled water flow* 1.05 1.10
T T
vapo

Pressure drop 1.15 Pc = P x 1.15 1.30 Pc = P x 1.30


Ev

Average temperarure C 12 / 7 See table


Cooling capacity 0.97 Pfc = Pf x 0.97
denserr

Qc = (Pfc + Pa) x 0.86 x 1.05


Chilled water flow* 1.05
T
onde

Pressure drop 1.10 Pc = P x 1.10


Co

Average temperarure C 35 / 40

* With the correct cooling capacity and compressor absorbed power, calculate the recovered heating capacity and hot water flow.

AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C ?


    
LC
VERSION WITH HYDRAULIC EQUIPMENT LCH SERIES
The PLUG AND COOL solution with CIATCOOLER LCH
The hydraulic equipment is designed with all the hydraulic circuit components required for a correct operation of the unit :
– Buffer tank.
– Expansion vessel.
– Water flow switch.
– Pressure gauges with shut off valve.
 

– Antifreeze protection of hydraulic circuit (optional).


– Draining valve.


– Automatic and manual air vent.


– Safety valve.
– Filling hole with valves.
– Large choice of single or twin pumps (1).
Control of the assembly.
Easy to install, all the components of hydraulic equipment are optimised, fitted and tested in the factory.
With the hydraulic equipment, CIATCOOLER LCH is ready to run and this is very easy to do air conditioning or industrial process.

(1) Pumps are designed to work with closed water circuit. For any others applications, consult us (open water circuit, high
head pressure, etc.).

HYDRAULIC CIRCUIT

Safety valve 4 bars


Auto air vent ?!,  .,- ?D?.

2! D!! ",,"!, 3"D.! 4


!,C

Water drain cock ?!, !2, ?D?.

B?,.,
9..
B":,-
-'0 ' 7 
3'4

9'/ .,- ?D?


2  6'' /'/

" = /'/

WATER INLET CONNECTION


(CUSTOMER)

Tap
Options :
Butterfly isolating valve
– Piping flexible sleeves (MS)
Pressure gauge – Antifreeze protection (RE - RB - RT - RV)
– Twin pumps
Insulation

< AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C


    

LC
HYDRAULIC CHARACTERISTICS
n
$ !  +!  @ " 

)  !   

 
Water pressure drop mWG


Water flow m3/h

n !  

N° 102 to 112 : single pumps N° 102 to 112 : twin pumps

Do not extrapolate above curves. Please respect absolutely minimum and maximum water flow

AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C >


    
LC
HYDRAULIC CHARACTERISTICS
n "  n 6  
6  !      6  !    
 


Do not extrapolate above curves. Please respect absolutely minimum and maximum water flow

NOTES
............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

9 AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C


    

LC
SOUNDS LEVELS
Standard version - High speed fans
n !   !  " #  2 9A=  $ 8 - 45
.D,$ ? ..D  9 .?"! D 3(4
 
 !' %)(  %%)
 :;
 :;  :;  :;
 :;  :;  :;  :; ' / ' (34

98:         
'99:      
  

 
;99: <98:      
  


<9':   
    

999: 99: '99:      
  

n !  ) " # 9A 6 $ 8 -

.D,$ ?2 9 .?"! D 3(4


 
 !' %)( 7 
 :;
 :;  :;  :;
 :;  :;  :;  :; ' / ' (34

98:     
  

'99:         

;99: <98:        

<9':         

999:        

99: '99:
       

Low noise version - Low speed fans + compressor phonic insulation


n !   !  " #  2 9A=  $ 8 - 45
? ..D  9 .?"! D 3(4
 
 !' %)(  %%)
 :;
 :;  :;  :;
 :;  :;  :;  :; ' / ' (34

98:  
      

'99:         

;99: <98:         

<9':        


999: 99: '99:         

n !  ) " # 9A 6 $ 8 -


.D,$ ?2 9 .?"! D 3(4
 
 !' %)( 7 
 :;
 :;  :;  :;
 :;  :;  :;  :; ' / ' (34

98:         

'99:         

;99: <98:   

  

<9':         

999:   

  

99: '99:         

Pressure levels are calculated following ISO 3744 regulation Lp = Lw – 10 log S, in free field and at 10 meters from the unit.
We remind that the acoustic pressure level is given as an indication and that only the sound power level is comparable and certified.

AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C 


    
LC
DIMENSIONS
n  
8  '   B  # (   ! 
 


"( %   '   "&'' ( 7  ' 

"( %   )'   "&'' ( 7  )' 

 98: '99: ;99: <98: <9': 999: 99: '99:


A   



 
B        
Nb of compressors  
empty 
  
 
   
 
 
Weight kg
in operation   
 
    

n  

8  '   B  # (   ! 

"( %   '   "&'' ( 7  ' 

"( %   )'   "&'' ( 7  )' 


98: '99: ;99: <98: <9': 999: 99: '99:
A   



 
empty     
 
   
Weight kg
in operation   
 
  
 
 


 AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C


    

LC
DIMENSIONS
n  
8   B  # (   ! 

 

"( %   '   "&'' ( 7  '   "( %  & 7  ' 
"( %   )'   "&'' ( 7  )'   "( %  & 7  )' 

n  
'   B  # (   ! 

"( %   '   "&'' ( 7  '   "( %  & 7  ' 
"( %   )'   "&'' ( 7  )'   "( %  & 7  )' 

 98: '99: ;99: <98: <9': 999: 99: '99:


A   



 
empty    
   
 
Weight kg
in operation 
 
       

AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C 8


    
LC
ADVISES FOR INSTALLATION
n     

H The CIATCOOLER LC - LCT and LCH are packaged units H Without the winter protection option
for outdoor installation. The unit does not include antifreeze protection for the hydraulic
module.
H A free space of 2 meters around the unit is necessary for a If there is a risk of frost :
good air circulation and maintenance. – either drain the installation
H Choose the location in order to respect environement – or put glycol in the hydraulic circuit
 

(acoustic level, etc.).


H With the winter protection option


H The sound level problems must be studied in detail. In case of electricity cut, the unit is no longer protected against
freezing.
Also, before proceeding with the installation, study (if
necessary with a sound technician’s assistance) the best place n
$ !   
to install the unit.

If necessary, install the unit on antivibration mounts and fit   
flexible connectors on the piping (recommended equipment). H Water connections must be made with good engineering
practice.
H Provide the accessories necessary for hydraulic circuits :
– Expansion vessel,
– Drain cocks at low points,
n    
– Shut off valves,
H All indications regarding electrical connections are – Air vents at high points, etc ...,
mentioned on the wiring diagram supplied with the unit and – Check that the water content in the installation is correct,
must be conformed to. – Provide, if required, a buffer tank.
H Connections must be in accordance with good practice and n    (
all regulations in force on the site.
H In accordance with our installation and maintenance
H Leave the control circuit under voltage to allow operation of brochure.
the crankcase heater and antifreeze heater.
n % 
H The electrical mains supply must be fitted with fuse or circuit H See our operating and maintenance guide.
breaker protection (to be supplied by the contractor). H Subscribe a maintenance contract.

NOTES
............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

............................................................................................................................

' AIR CO NDITIO NING - REFRIG ERATIO N - AIR HANDLING - H E A T E X C H A N G E - NA 04.532 C

Potrebbero piacerti anche