Sei sulla pagina 1di 54

int sensorPin = A4; // sel <math.

h>
include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}

double Thermistor(int RawADC) {


double Temp;
float include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}

_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));


Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}

#include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LEinclude <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
D));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
for the potentiometer
double Thermistor(int RawADC) {include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}

double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
include <math.h>
int sensorPin = A4; // sel <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}ect the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp; <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
} <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
} - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}

void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() { <math.h>
int sensorPin = A4; // select the input pin for the potentiometer
double Thermistor(int RawADC) {
double Temp;
float _temp2;
_temp2 = logf(10000.0 * ((1024.0 / RawADC - 1)));
Temp = (double)_temp2;
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}
void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}
Temp = 1 / (0.001129148 + (0.000234125 + (0.0000000876741 * Temp * Temp )) * Temp
);
Temp = Temp - 273.15; // Convert Kelvin to Celcius
//Temp = (Temp * 9.0)/ 5.0 + 32.0; // Convert Celcius to Fahrenheit
return Temp;
}

void setup() {
Serial.begin(9600);
pinMode(RED_LED, OUTPUT);
}
void loop() {
int readVal = analogRead(sensorPin);
double temp = Thermistor(readVal);
Serial.print(temp); // display tempature
//Serial.println(readVal); // display tempature
digitalWrite(RED_LED, !digitalRead(RED_LED));
delay(500);
}

Potrebbero piacerti anche