Sei sulla pagina 1di 104

Fluoropolymer Piping Equipment

LQ1/LQ3/LVN/LQHB/T  Series
RoHS

LVC
LVA
LVH
LVD
LVQ
LVP
LVW
LQ1
Fluoropolymer Fittings Hyper Fittings Fluoropolymer Fittings Hyper Fittings/ LQ3
LQ1 Series Flare Type
LQ3 Series LVN
LQHB
TL
TIL
TLM
TILM
New PFA New PFA TD
TID

Needle Valve Bore Through Connector Fluoropolymer Tubing TH


TIH
LVN Series LQHB Series TL/ TIL Series

New PFA New PFA Super PFA

Fluoropolymer Tubing Soft Fluoropolymer Tubing FEP Tubing (Fluoropolymer)


TLM/ TILM Series TD/TID Series TH/ TIH Series

PFA Modified PTFE FEP

857 A
Fluoropolymer Fittings Hyper Fittings
Quadruple sealing construction
The quadruple sealing construction (PAT.) based on SMC’s original idea results in
highly reliable sealing characteristics with outstanding leakage prevention effect.

Flow-through characteristics
Excellent flow-through characteristics are
200°C
achieved by minimizing liquid deposit.
compatible
Locking
 Locking mechanism utilizes sealing lock by the nut.
 Trapezoidal thread allows application of high torque.
 2 stage pressing by the tubing holder of the nut ensures secure tube holding.

Basic B side sealing


2 stage pressing construction ensures sealing and tubing
locking to absorb differences in the tube outside diameter. By tapering the face of the body, perfect
sealing is achieved by the pressure of the
bushing against the body wall (the protrusion
D side sealing Main sealing of the insert bushing ensures that a secure
A seal is formed when the high pressure seal is achieved).
tubing is inserted, with its insert
A side sealing
bushing, and its compression
against the internal nut. The fluid pressure
Sealing lock
pushes the seal face to
Tapered face
get effective sealing.

Fluid pressure
Area of application
Main sealing

Area of application

Tubing support
Trapezoidal thread

C side sealing Body class 1 and 2

Sealed by the pressure exerted on the tubing by the internal nut.

Strong resistance to tube Easy tightening of nuts.


bending and deformation.  No positioning guide is required, simply tighten up the
Able to withstand lateral loads with the tubing support. tubing to the end of the fitting body.
 The trapezoidal thread prevents oblique nut insertion.
Tubing sizes are interchangeable.
 The reducer method allows tubing size changes without replacing the body.
 Helps standardize fitting items resulting in less stock requirements.

Reducing type Reducing insert bushing

858
LQ1 Series P.874

LQ1 Series
Addition of variations LVC
LVA
LVH
Newly introduced shape LVD
Union Union elbow Union tee Panel mount
reducing reducing reducing union reducing LVQ
LVP
LVW
LQ1
LQ3
Space saving Space saving Space saving Space saving
union elbow union tee union elbow reducing union tee reducing LVN
LQHB
TL
TIL
TLM
SMC SMC SMC
TILM
TD
SMC

TID
Tubing extension Tubing extension Tubing extension Tubing extension TH
union elbow union tee union elbow reducing union tee reducing TIH

SMC

SMC SMC

Space-saving, piping Cut down on longitudinal dimension


work-saving
 Cut down on the fittings use by a
variation upgrade on the different
diameter connection(s).

New type Current type

859
Fluoropolymer Fittings
Hyper Fittings / Flare Type LQ3 Series P.912

Flare type collet construction


Triple-seal construction
Ease of installation
Excellent flow-through characteristics
Excellent heat resistance
200°C compatible

 Tubing retainer of the nut is made from a  To establish the tightening position, a gauge control
two-stage structure, enabling it to hold the is not required as the nut is designed to be tightened
tubing firmly. until the end surface of the fitting’s main body.
 Fitting’s seal surface to the tubing adopts a
unique design to the area’s pressure, resulting Clearance for
extra
in improved sealing performance. tightening
Nut
Corrugated
retainer
shape Nut
Body
Body Seal surface
Seal
surface
Seal 2
Tubing
Seal 3
Seal 1

Seal 3

Tubing support
Collet Trapezoidal thread
Providing additional strength
Prevents the nut from loosening at a high
against possible tube bending
tightening torque, and from installing in a
or deformation.
tilted position.
Heat resistant.
 Strengthening the prevention of the tubing release by means of the collet structure.
 Sealing performance is highly maintained in a circumferential seal surface having
a unique shape even under thermal stress conditions.
Collet

Protrusion

Body

Tubing
Seal surface

860
Fluoropolymer Needle Valve LVN Series P.938

Fluid adjustment range 0 to 12 L/min


Integrated fitting construction
Hyper fitting, LQ2 series is used. LVC
Integrated fitting Triple seal construction LVA
construction
(Hyper fitting, LQ2 series is used.)
LVH
 Quadruple sealing method LVD
Triple seal
 Nut locking mechanism construction
 High flexural strength
LVQ
 Different tubing sizes can LVP
be selected.
LVW
LQ1
LQ3

Fluoropolymer Bore Through Connector LQHB Series P.941 LVN


LQHB
Freely choose tube positioning Easy tightening of nuts
TL
TIL
Can be used in pressure feed of chemical liquids, etc., during The trapezoidal thread
Nut TLM
prevents oblique nut TILM
the production process of semiconductors. Applicable to insertion. Material: New PFA
chemical liquids such as acid, alkali and deionized water. Maximum operating temperature TD

As the tube runs through the fitting itself,


200°C TID
TH
a setting is available for any optional position. TIH

Taper thread
Thread type: R, NPT

Body
Material: New PFA Collet
The tube is held securely in place
Locking by the tightening nut and collet.
Trapezoidal thread allows Material: PTFE
application of high torque.

Applications
Pressure feed of chemical liquids Water trap Fluid temperature control
N2 Fluid outlet
Discharge of chemical liquids Fluid inlet Mounting to the piping and/
LQ series or fluid passage
LQHB series LQ series LQHB series
Male connector Bore through connector Male connector Bore through connector Temperature LQHB series
sensor Bore through connector

Fluid

LQ series
A changing of the tube position is available in accordance with the depth of the container. Male connector Drain

861
Fluoropolymer Tubing TL/TIL Series P.948

Operating Temperature Note) Max. 260°C


Note) It varies depending on the conditions.
For details, refer to page 948.

Materials: Super PFA


14 Size Variations
 Metric Sizes: ø4 to ø19 [6 size]
 Inch Sizes: 1/8" to 1" [8 size]

Fluoropolymer Tubing (PFA) TLM/TILM Series P.949

Operating Temperature Note) Max. 260°C 4 Color Variations


Note) It varies depending on the conditions.
For details, refer to pages 950 and 951.

Applications: 22 Size Variations


Photovoltaic cell manufacturing,  Metric Sizes: ø2 to ø25 [13 size]
 Inch Sizes: 1/8" to 1 1/4" [9 size]
LCD manufacturing, HDD
manufacturing, Medical, Food
Compatible with the Food Sanitation Law
 Compatible with the test conforming to Japan's the Food Sanitation Law based

on the 370th notice given by the Ministry of Health and Welfare in 1959.
 Complies with FDA (Food and Drug Administration) §177-1550
dissolution test.

Soft Fluoropolymer Tubing TD/TID Series From


page 952

Flexibility: Improved by approx. 20% Material: Modified PTFE


∗ SMC comparison (Fluoropolymer tubing, TL/TIL series)

Applications: Operating Temperature Note) Max. 260°C


Note) It varies depending on the operating pressure.
Food, Semi-conductor, Refer to the graph for maximum operating pressure

Medical, Automobile and (pages 952 and 953).

Machine tools fields


10 Size Variations
 Metric Sizes: ø4 to ø12 [5 size]
Compatible with the Food Sanitation Law  Inch Sizes: 1/8" to 1/2"(ø3.18 to ø12.7) [5 size]
 Compatible with the test conforming to Japan's the

Food Sanitation Law based on the 370th notice


given by the Ministry of Health and Welfare in 1959.
 Complies with FDA (Food and Drug Administration)

§177-1550 dissolution test.

862
FEP Tubing (Fluoropolymer) TH/TIH Series From
page 954

LVC
LVA
LVH
Operating Temperature
Note) It varies depending on the operating pressure.
Note)
200°C 19 Size Variations LVD
 Metric Sizes: ø4 to ø12
Refer to the graph for maximum operating pressure (pages 954 and 956).  Inch Sizes: 1/8" to 3/4" LVQ
LVP
Material: FEP Applications: For general pneumatic
LVW
piping, Food, Semi-conductor,
4 Color Variations: Medical, Automobile fields LQ1
Translucent, Black, Red, Blue LQ3
Compatible with the Food Sanitation Law LVN
Compatible with the test conforming to the Food Sanitation Law based
on the 370th notice given by the Ministry of Health and Welfare in 1959. LQHB
TL
TIL
TLM
TILM
Fluoropolymer Tubing Variations TD
TID
Series TL/TIL TLM/TILM TD/TID TH/TIH TH
TIH
It is suitable for applications which require The material consists of a good Flexibility improved by ap- This has better resistance in
a highly smooth internal surface and chemical resistant fluoropoly- prox. 20% (Compared with chemical liquids environments.
Features small amount of elution of fluorine ions. mer. This also has good heat SMC TL/TIL Series)
∗ It has heat and chemical resistance equiva- resistance, and it is suitable for Suitable for applications
lent to PFA. a wide range of applications. which require flexibility.

Material Super PFA PFA Modified PTFE FEP

Chemical resistance 

Heat resistance 260°C 260°C 260°C 200°C

Flexibility    

Ion elution   

Internal smoothness   

Fluid Chemical liquids, Deionized water Chemical liquids, Deionized water Air, Water, Inert gas

Metric ø4 to ø19 ø2 to ø25 ø4 to ø12 ø4 to ø12


Tubing O.D.
Inch 1/8" to 1" 1/8" to 1 1/4" 1/8" to 1/2" 1/8" to 3/4"

Color Translucent Translucent, Red, Blue, Black Translucent Translucent, Red, Blue, Black

One-touch fittings — KQ2, KQG2, KP, KP — KQ2, KQG2, KP, KP
Applicable fitting

Miniature fittings — M, MS (Hose nipple type) M, MS (Hose nipple type) M, MS (Hose nipple type)
series

Insert fittings — KF, KFG2 KF, KFG2 KF, KFG2


Fluoropolymer fittings LQ1, LQ2, LQ3 LQ1, LQ2, LQ3 LQ1, LQ2, LQ3 LQ1, LQ2, LQ3
: Very good : Good : Moderate
The comparison table shown above was prepared based on a relative comparison taking the characteristics of each fluoropolymer tubing into consideration.

863
864
LQ1 Series Fluoropolymer Fittings Hyper Fittings
LQ1 Series P.874
Tubing O.D.
Port size
Series Appearance Class Metric size Inch size
None 1/8" 1/4" 3/8" 1/2" 3/4" 1" ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 1"

1
2
3 LVC
Male
4
LVA
5
Connector
P.877 6
LVH
LQ1H 1 LVD
2
LVQ
3
Female
4
LVP
5 LVW
P.878 6
LQ1
1
LQ3
2
3 LVN
Male
4
LQHB
5
TL
Elbow TIL
P.879 6
LQ1L 1
TLM
TILM
2 TD
TID
3
Female TH
4 TIH

5
P.880 6

1
2
3
Male
4
5
Run tee
P.881 6
LQ1R 1
2
3
Female
4
5
P.882 6
Note) Basic size With reducer

865
LQ1 Series
Tubing O.D.
Port size
Series Appearance Class Metric size Inch size
None 1/8" 1/4" 3/8" 1/2" 3/4" 1" ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 1"

1
2
3
Male
4
5
Branch tee
P.883 6
LQ1B 1
2
3
Female
4
5
P.884 6

1
2
Union elbow
3
LQ1E 4
5
P.885 6

1
2
Union tee
3
LQ1T 4
5
P.886 6

1
2
Panel mount union
3
LQ1P 4
5
P.887 6

1
2
Union
3
LQ1U 4
5
P.888 6

Union flange 4

LQ1F 5
P.888 6
Note) Basic size With reducer

866
Fluoropolymer Fittings Hyper Fittings

Tubing O.D.
Series Appearance Class Metric size Inch size
ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 1"

Union elbow 3
reducing
4 LVC
LQ1E-R 5
LVA
P.889 6
2 LVH
Union tee 3 LVD
reducing
4
LQ1T-R 5
LVQ
P.891 6 LVP
2 LVW
Panel mount 3
union reducing LQ1
4
LQ1P-R 5 LQ3
P.896 6
LVN
2
3
LQHB
Union
reducing TL
4 TIL
LQ1U-R 5 TLM
TILM
P.897 6
TD
2 TID
TH
Space saving 3 TIH
union elbow
4
LQ1E-SS SMC
5
P.898 6
2

Space saving 3
union tee
4
LQ1T-S 5
P.900 6
Note) Basic size With reducer

867
LQ1 Series
Tubing O.D. Can be connected
Series Appearance Class Metric size Inch size body class
ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 1" 2 3 4 5 6

2
Space saving 3
union elbow
reducing 4
LQ1E-SS-R SMC
5
P.899 6
2
Space saving 3
union tee
reducing 4
LQ1T-S-R 5
P.901 6

2
Tubing extension 3
union elbow
4
LQ1E-T
5
SMC

P.903 6
2
Tubing extension 3
union tee
4
LQ1T-T
5
P.904 6
2
Tubing extension 3
union elbow
reducing 4
LQ1E-T-R 5
P.905 6
2
Tubing extension 3
union tee
reducing 4
LQ1T-T-R 5
P.906 6
Note) Basic size With reducer

868
Fluoropolymer Fittings Hyper Fittings

Tubing O.D.
Series Appearance Class Metric size Inch size
ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 1"

1
Space saving 2
union elbow 3
SMC

LQ1E-S 4
5 LVC
P.908 6
1 LVA
Space saving 2
union tee 3 LVH
LQ1T-S
SMC

4
5 LVD
P.908 6

Space saving
1 LVQ
2
panel mount
3 LVP
union
4
LQ1P-S P.908
5
LVW
6
1
Space saving 2 LQ1
SMC

union 3
LQ3
LQ1U-S 4
5
P.908 6 LVN
1
Panel mounting 2 LQHB
nut 3 TL
LQNP 4
5
TIL
P.908 TLM
6 TILM
Nut insert bush 1
2 TD
LQ1-U 3
TID

B 4
5
TH
TIH
N P.909 6
1
2
Blanking plug
3
LQ-P 4
5
P.909 6
1
2
Tubing plug
3
LQ1-CP 4
5
P.909 6
Note) Basic size With reducer

869
LQ3 Series
LQ3 Series P.912
Tubing O.D.
Port size
Series Appearance Class Metric size Inch size
None 1/8" 1/4" 3/8" 1/2" 3/4" 1" 11/4" ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 1/4" 3/8" 1/2" 3/4" 1" 11/4"
1
2
3
Male 4
5
Connector 6
P.915 7
LQ3H 1
2
3
Female
4
5
P.916 6
1
2
3
Male
4
5
Elbow P.917 6
LQ3L 1
2
3
Female
4
5
P.918 6
1
2
3
Male
4
5
Branch tee P.919 6
LQ3B 1
2
3
Female
4
5
P.920 6
1
2
3
Male
4
5
Run tee P.921 6
LQ3R 1
2
3
Female
4
5
P.922 6
1
2
Union elbow 3
4
LQ3E 5
6
P.923 7
1
2
Union tee 3
LQ3T 4
5
P.923 6

870
Fluoropolymer Fittings Hyper Fittings / Flare Type

Tubing O.D.
Port size
Series Appearance Class Metric size Inch size
None 1/8" 1/4" 3/8" 1/2" 3/4" 1" 11/4" ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 1/4" 3/8" 1/2" 3/4" 1" 11/4"

1
Panel mount 2
union 3

LQ3P 4
5 LVC
P.924 6
1 LVA
2
Union 3 LVH
LQ3U 4
5 LVD
6
P.924 7 LVQ
Tubing O.D. LVP
Series Appearance Class Metric size Inch size
ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 1/4" 3/8" 1/2" 3/4" 1" 11/4" LVW
1
2 LQ1
Union 3
reducing : A side : B side 4 LQ3
LQ3U-R 5
6 LVN
P.925 7
: A side 1 LQHB
Union elbow 2
TL
reducing 3 TIL
4
LQ3E-R : B side

5 TLM
P.926 TILM
6
TD
1 TID
: B side
Union tee 2
3 TH
reducing TIH
4
LQ3T-R : A side 
: C side

5
P.927 6
Note)  : A side tubing O.D.  : B side tubing O.D. 
 : C side tubing O.D.
Tubing O.D.
Series Appearance Class Metric size Inch size
ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 1/4" 3/8" 1/2" 3/4" 1" 11/4"

2
Space saving 3
union elbow 4
5
LQ3E-S 6
P.929 7
2
Space saving 3
branch tee 4
LQ3T-SB P.930
5
6
2
Space saving 3
run tee 4
LQ3T-SR P.931
5
6
2
Tubing extension 3
straight connector 4
5
LQ3H-T 6
P.932 7
871
LQ3 Series Fluoropolymer Fittings Hyper Fittings / Flare Type

Tubing O.D.
Series Appearance Class Metric size Inch size
ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 1/4" 3/8" 1/2" 3/4" 1" 11/4"
2
Straight 3
adapter 4
5
LQ3A 6
P.933 7
2
Union 3
flange 4
LQ3F P.935
5
6
2
Space saving type 3
union elbow
4
LQ3E-SN P.936
5
6
2
Space saving type 3
union tee
4
LQ3T-SN P.936
5
6
2
Space saving type 3
panel mount union
4
LQ3P-SN P.936
5
6
2
Space saving type 3
union
4
LQ3U-SN P.936
5
6
1
2
Blanking plug 3
4
LQ3-P-1 5
6
P.937 7
1
2
Tubing plug 3
4
LQ3-P-2 5
6
P.937 7
1
2
Nut 3
4
LQ3-N 5
6
P.937 7

A 872
Needle Valve
TL TD TH
LVN/LQHB Series / TIL TID TIH / / /Bore Through Connector
/High Purity Fluoropolymer Tubing
Needle Valve P.938
Tubing O.D.

Size
Series Appearance Metric Size Inch Size
ø4 ø6 ø8 ø10 ø12 1/8" 3/16" 1/4" 3/8" 1/2"

2   − − −    − −

Needle valve
3
LVN −    − − −   −
LVC
4 − − −   − − −  
LVA
Note) Basic size With reducer
LVH
Bore Through Connector P.941
Tubing O.D. LVD
Size

Series Appearance Metric Size Inch Size


ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 1/4" 3/8" 1/2" 3/4" 1" LVQ
1   − − − − − −  − − − − −
Bore through 2 − −  − − − − − −  − − − − LVP
connector 3 − − −   − − − − −  − − −
LVW
LQHB 4
5




























6 − − − − − − −  − − − − −  LQ1

High Purity Fluoropolymer Tubing P.947 LQ3


Series Tubing O.D. Page LVN
Material: Super PFA ø4
ø6 LQHB
ø8 TL
TL Metric Size
ø10 TIL
ø12
TLM
ø19 P.948 TILM
1/8"
3/16"
TD
TID
TIL Inch Size 1/4"
3/8" TH
TIH
1/2"
Material: PFA
ø2, ø3, ø4, ø6,
TLM Metric Size ø8, ø10, ø12,
ø16, ø19, ø25
From page
1/8", 3/16", 949
1/4", 3/8",
TILM Inch Size
1/2", 3/4"
1", 1 1/4"
Material: Modified PTFE ø4
(Polytetrafluoroethylene resin) ø6
TD Metric Size ø8
ø10
ø12
From page
1/8" 952
3/16"
TID Inch Size 1/4"
3/8"
1/2"
Material: FEP ø4
ø6
TH Metric Size ø8
ø10
ø12
1/8" From page
3/16" 954
1/4"
TIH Inch Size
3/8"
1/2"
3/4"

873
Fluoropolymer Fittings
Hyper Fittings RoHS

LQ1 Series
How to Order

Threaded
connection
LQ1 H 11 M
Thread type
Fitting type Symbol Type
Symbol Type Nil R, Rc
H Connector N NPT Packaging
L Elbow Symbol Packaging
R Run tee Piping type Clean packaging equivalent to
Symbol Type Nil
B Branch tee Class M3.5
M Male Standard packaging equivalent
1
F Female to Class M5.5
Size combination
Symbol Applicable tubing Symbol
For different diameter (on B side)
Applicable tubing
Port size Port size Symbol Application
Class No. size (mm) Class No. size (inch)
1 1 4x3 1 A 1/8" x 0.086" 1/8" Nil Same tubing size
1/8"
1 2 3x2 2 A 1/4" x 5/32" Refer to the applicable Different diameter tubing can be selected
2 1 6x4 2 B 3/16" x 1/8" 1/8" tubing table. within the same body class.
2 2 4x3 1/8" 2 C 1/8" x 0.086" LQ1B LQ1R
2 C 3x2 2 D 1/4" x 5/32"
Branch tee male Branch tee female Run tee male Run tee female
2 3 6x4 2 E 3/16" x 1/8" 1/4"
2 4 4x3 1/4" 2 F 1/8" x 0.086" A A A A
2 F 3x2 3 A 3/8" x 1/4"
1/4"
3 1 10 x 8 3 B 1/4" x 5/32" B B
3 2 8x6 1/4" 3 C 3/8" x 1/4"
3 3 6x4 3 D 1/4" x 5/32" 3/8" B B
3 4 10 x 8 3 E 1/8" x 0.086"
3 5 8x6 3 F 3/8" x 1/4" 1/8" The table of combination is the same as that for A side.
3 6 6x4 3/8" 4 A 1/2" x 3/8" Note 1) Only branch tees and run tees can take different diameters.
3/8" Note 2) Use of different diameters is not available with size 1.
3 7 4x3 4 B 3/8" x 1/4"
3 E 3x2 4 C 1/2" x 3/8"
3 9 10 x 8 4 D 3/8" x 1/4" Different diameter tubing order example
1/8" 1/2"
3 10 8x6 4 E 1/4" x 5/32" Different diameter tubing (with plug-in reducer)
4 1 12 x 10 4 F 1/8" x 0.086" can be selected within the same body class. A
3/8"
4 2 10 x 8 4 G 1/2" x 3/8" 1/4" (Example) Branch tee male
4 3 12 x 10 5 A 3/4" x 5/8" Body class 3
1/2"
4 4 10 x 8 5 B 1/2" x 3/8" A side: ø10 x ø8 B side: ø8 x ø6
4 5 8x6 1/2" 5 C 3/4" x 5/8" Order as shown below. B
4 6 6x4 5 D 1/2" x 3/8" Only select combinations
3/4"
4 F 3x2 5 E 3/8" x 1/4" from the same body class.
4 9 12 x 10 1/4" 5 F 1/4" x 5/32"
5 1 19 x 16
1/2"
5 G 3/4" x 5/8" 1/4" LQ1 B 31 32 M
5 2 12 x 10 5 H 3/4" x 5/8" 3/8"
5 3 19 x 16 6 A 1" x 7/8" Different dia. tubing size (B side)
3/4" Applicable tubing size (A side)
5 4 12 x 10 6 B 3/4" x 5/8"
3/4"
5 5 10 x 8 6 C 1" x 7/8" Branch tee male
5 7 6x4 6 D 3/4" x 5/8" 1" Tubing in inches can be combined with that in mm in the
5 8 19 x 16 1/4" 6 E 1/2" x 3/8" same body size. Example) LQ1B313A-M
5 9 19 x 16 3/8" 6 F 1" x 7/8" 1/2"
6 1 25 x 22 Branch tee male/Female (LQ1B) How to Order
3/4"
6 2 19 x 16 As this product is bilaterally symmetric (A side and B side),
6 3 25 x 22 depending on the combination, 2 identical part numbers
6 4 19 x 16 1" may be listed in series. Be sure to list symbols in ascending
6 5 12 x 10 alphanumerical order.
6 6 25 x 22 1/2"
Note 1) Tubing of different sizes can only be used in combination if within LQ1B 31 32 M
the same body class. However, for class 1, tubing of different sizes
cannot be used in combination. Listed in ascending numerical order
Note 2) Combinations will differ depending on the type of each fitting. Example 1) Ascending numerical order Example 2) Ascending alphanumerical order
For the availability of combinations, refer to pages 877 to 884.
These are produced upon receipt of order by part number. Correct) LQ1B 31 32 -M Correct) LQ1B 37 3E -M
Note 3) For details of the applicable tubing sizes, refer to page 945. Incorrect) LQ1B 32 31 -M Incorrect) LQ1B 3E 37 -M

A 874
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

How to Order

Tubing connection LQ1 E 11 Packaging


Symbol Packaging
Nil Clean packaging equivalent to Class M3.5
1 Standard packaging equivalent to Class M5.5
Combination of different diameter (on B side) LVC
Fitting type
Symbol Type Symbol Applicable tubing Symbol Applicable tubing
E Union elbow Class No. size (mm) Class No. size (inch) LVA
T Union tee 1 1 4x3 1 A 1/8" x 0.086"
P Panel mount union 1 2 3x2 — — — LVH
U Union 2 1 6x4 2 A 1/4" x 5/32"
F Union flange 2 2 4x3 2 B 3/16" x 1/8" LVD
2 C 3x2 2 C 1/8" x 0.086"
3 1 10 x 8 3 A 3/8" x 1/4"
3 2 8x6 3 B 1/4" x 5/32" LVQ
3 3 6x4 4 A 1/2" x 3/8"
4 1 12 x 10 4 B 3/8" x 1/4" LVP
4 2 10 x 8 5 A 3/4" x 5/8"
5 1 19 x 16 5 B 1/2" x 3/8" LVW
5 2 12 x 10 6 A 1" x 7/8"
6 1 25 x 22 6 B 3/4" x 5/8"
6 2 19 x 16
LQ1
Note 1) Tubing of different sizes can only be used in combination if
within the same body class. However, use of different LQ3
diameters is not available with size 1.
Note 2) For details of the applicable tubing sizes, refer to page 945. LVN
Size combination
Symbol Applicable tubing Symbol Applicable tubing Applicable Symbol Application
Class No. size (mm) Class No. size (inch) flange Nil Same tubing size
LQHB
1 1 4x3 1 A 1/8" x 0.086" Refer to the applicable Different diameter tubing can be selected TL

1 2 3x2 — — — tubing table. within the same body class. TIL
2 1 6x4 2 A 1/4" x 5/32" TLM
— Union elbow Union tee Panel mount Union
2 2 4x3 2 B 3/16" x 1/8" LQ1E LQ1T union LQ1U TILM
2 C 3x2 2 C 1/8" x 0.086" A LQ1P
3 1 10 x 8 3 A 3/8" x 1/4" — A TD
B A
3 2 8x6 3 B 1/4" x 5/32" A TID
3 3 6x4 4 A 1/2" x 3/8" TH
15A B TIH
4 1 12 x 10 4 B 3/8" x 1/4" B B B
4 2 10 x 8 5 A 3/4" x 5/8"
20A
5 1 19 x 16 5 B 1/2" x 3/8"
5 2 12 x 10 6 A 1" x 7/8"
25A
6 1 25 x 22 6 B 3/4" x 5/8"
6 2 19 x 16
Note 1) Tubing of different sizes can only be used in combination if within the same body class. However, for class 1, tubing of different sizes
cannot be used in combination.
Note 2) Sizes 1 to 3 are not available for the union flange.
Note 3) For Union flange, nut sizes 4 and 5 are as shown below.
LQ1F4: LQ-4N
LQ1F5: LQ-5N
Note 4) Combinations will differ depending on the type of each fitting. For the availability of combinations, refer to pages 885 to 888.
Note 5) For details of the applicable tubing sizes, refer to page 945.

Different diameter tubing order example


Different diameter tubing (with plug-in reducer) can be Union elbow (LQ1E)/Union (LQ1U) How to Order
selected within the same body class. A As this product is bilaterally symmetric (A side and B side),
(Example) Union elbow depending on the combination, 2 identical part numbers may be
Body class 3 listed in series. Be sure to list symbols in ascending alphanumerical
A side: ø10 x ø8 B side: ø8 x ø6 order.
Order as shown below.
Only select combinations
from the same body class.
B LQ1E 31 32
LQ1 E 31 32 Listed in ascending numerical order
Different dia. tubing size (B side) Example 1) Ascending numerical order Example 2) Ascending alphanumerical order
Applicable tubing size (A side) Correct) LQ1E 31 32 Correct) LQ1E 31 3A
Union elbow Incorrect) LQ1E 32 31 Incorrect) LQ1E 3A 31
Tubing in inches can be combined with that in mm
in the same body size. Example) LQ1E313A

875 A
LQ1 Series

Specifications

Model LQ110 LQ120 LQ130 LQ140 LQ150 LQ160


Feature
Material NEW PFA Note)
Maximum operating pressure 1.0 MPa
(at 20°C)
Refer to the withstand pressure and heat resistance
Proof pressure performance curves.
Operating temperature 0 to 200°C
Note) For products produced upon receipt of order, the fitting body is made of PTFE.

Withstand Pressure and Heat Resistance Performance

4.0

3.5

3.0
Pressure (MPa)

2.5

2.0

1.5

1.0

0.5

0 20 40 60 80 100 120 140 160 180 200


Temperature (°C)

1/8", 3/16", 1/4", ø4, ø6 tubing 3/8", ø10 tubing


1/2", ø12 tubing 3/4", ø19, 1" tubing

Piping

Caution
1. Connect tubing with special tools 2. Tighten the nut until it touches the end surface of
Refer to the pamphlet “High-Purity Fluoropolymer Fittings the body, and then tighten it an additional 1/8 turn.
Hyper Fitting/LQ1, 2 Series Work Procedure Instructions” If the nut won’t turn any further, then it means a
(M-E05-1) for connecting tubing and special tools. sufficient tightening has occurred. Refer to the
(Downloadable from our web site.) proper tightening torques shown below.
Tightening torque for piping
Body class Torque (N·m)
2 0.3 to 0.4
3 0.8 to 1.0
4 1.0 to 1.2
5 2.5 to 3.0
6 5.5 to 6.0
Note) In the case of body class 1, the nut
should be tightened manually.

A 876
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

Dimensions
Male Connector: LQ1H-M
øM

1/8
LVC
Class 1
øM
LVA
L

H
(A) LVH
W H
(A) shows the reference dimension after LVD
øM
connection.
øN

1/4
1 25
(E) shows the approximate dimension of the LVQ
inserted tubing from the end of the nut.
Port size (E)
Class 2 to 5 Class 6
“W” is width across flats dimension. LVP
R (NPT)
LVW
Metric sizes Inch sizes
LQ1
Applicable Connection Min. Applicable Connection Min.
Model tubing threads A E H L M N
port W Modeltubing threads A E H L M N port W
O.D. R/NPT size O.D. R/NPT size LQ3
LQ1H11-Ml ø4 2.6 LQ1H1A-Ml 1/8" 1/8" 21 10 — 25 11.5 4 1.8 10
LQ1H12-Ml ø3
1/8" 21 10 — 25 11.5 4
1.8
10
LQ1H2A-Ml 1/4" 3.6 LVN
LQ1H21-Ml ø6 3.6 LQ1H2B-Ml 3/16" 1/8" 31.5 4.4 2.9
LQ1H22-Ml ø4 1/8" 31.5 4.4 2.6 LQ1H2C-Ml 1/8" 1.8 LQHB
15 14 35 16.5 14
LQ1H2C-Ml ø3 1.8 LQ1H2D-Ml 1/4" 3.6 TL
15 14 35 16.5 14
LQ1H23-Ml ø6 3.6 LQ1H2E-Ml 3/16" 1/4" 29 6 2.9 TIL
LQ1H24-Ml ø4 1/4" 29 6 2.6 LQ1H2F-Ml 1/8" 1.8 TLM
LQ1H2F-Ml ø3 1.8 LQ1H3A-Ml 3/8" 5.8 TILM
1/4" 36.5 6
LQ1H31-Ml ø10 6 LQ1H3B-Ml 1/4" 3.6 TD
20 17 42.5 23
LQ1H32-Ml ø8 1/4" 36.5 6 5.5 LQ1H3C-Ml 3/8" 5.8 TID
36 19
LQ1H33-Ml ø6 3.6 LQ1H3D-Ml 1/4" 3/8" 10 3.6 TH
20 17 42.5 23
LQ1H34-Ml ø10 7.4 LQ1H3E-Ml 1/8" 31.5 15 14 37.6 16.5 1.8 TIH
LQ1H35-Ml ø8 36 5.5 LQ1H3F-Ml 3/8" 1/8" 34.5 20 17 38 23 4.4 4.4
19
LQ1H36-Ml ø6 3/8" 10 3.6 LQ1H4A-Ml 1/2" 8
3/8" 46 8
LQ1H37-Ml ø4 2.6 LQ1H4B-Ml 3/8" 5.8
31.5 15 14 37.6 16.5 24 21 52 28
LQ1H3E-Ml ø3 1.8 LQ1H4C-Ml 1/2" 9
44
LQ1H39-Ml ø10 4.4 LQ1H4D-Ml 3/8" 5.8 23
1/8" 34.5 20 17 38 23 4.4 1/2" 10
LQ1H310-Ml ø8 4.4 LQ1H4E-Ml 1/4" 39.5 20 17 47.5 23 3.6
LQ1H41-Ml ø12 8 LQ1H4F-Ml 1/8" 34 15 14 42 16.5 1.8
3/8" 46 8
LQ1H42-Ml ø10 7.4 LQ1H4G-Ml 1/2" 1/4" 42 24 21 48 28 6 6
24 21 52 28
LQ1H43-Ml ø12 9.4 LQ1H5A-Ml 3/4" 10
44 1/2" 55 10
LQ1H44-Ml ø10 7.4 LQ1H5B-Ml 1/2" 9
23 29 26 62.5 39
LQ1H45-Ml ø8 1/2" 10 5.5 LQ1H5C-Ml 3/4" 15
39.5 20 17 47.5 23 53.5
LQ1H46-Ml ø6 3.6 LQ1H5D-Ml 1/2" 9
3/4" 16 32
LQ1H4F-Ml ø3 34 15 14 42 16.5 1.8 LQ1H5E-Ml 3/8" 5.8
43.5 20 17 52.5 23
LQ1H49-Ml ø12 1/4" 42 24 21 48 28 6 6 LQ1H5F-Ml 1/4" 3.6
LQ1H51-Ml ø19 10 LQ1H5G-Ml 1/4" 6 6
1/2" 55 10 3/4" 52 29 26 58 39
LQ1H52-Ml ø12 9.4 LQ1H5H-Ml 3/8" 8 8
29 26 62.5 39
LQ1H53-Ml ø19 15 LQ1H6A-Ml 1" 16
53.5 3/4" 72 16
LQ1H54-Ml ø12 9.4 LQ1H6B-Ml 3/4" 15
3/4" 16 32 39.5 36 81 49
LQ1H55-Ml ø10 7.4 LQ1H6C-Ml 1" 21.2
43.5 20 17 52.5 23 71 46
LQ1H57-Ml ø6 3.6 LQ1H6D-Ml 3/4" 1" 22.5 15
LQ1H58-Ml ø19 1/4" 6 6 LQ1H6E-Ml 1/2" 61 29 26 71 39 9
52 29 26 58 39
LQ1H59-Ml ø19 3/8" 8 8 LQ1H6F-Ml 1" 1/2" 69.5 39.5 36 77.5 49 10 10
LQ1H61-Ml ø25 16
3/4" 72 16
LQ1H62-Ml ø19 15
39.5 36 81 49
LQ1H63-Ml ø25 21.2
71 46
LQ1H64-Ml ø19 1" 22.5 15
LQ1H65-Ml ø12 61 29 26 71 39 9.4
LQ1H66-Ml ø25 1/2" 69.5 39.5 36 77.5 49 10 10
877 A
LQ1 Series

Dimensions
Female Connector: LQ1H-F
øM

1/8 H
Port size
Rc (NPT) Class 1
L øM

W H

øM
ø(Y)

1/4 1 25
(E) shows the reference of the inserted tubing
(E) from the end of the nut.
Class 2 to 5 Class 6 “W” is width across flats dimension.

Metric sizes Inch sizes


Applicable Connection Min. Applicable Connection Min.
Model tubing threads E H L M port W Y Model tubing threads E H L M port W Y
O.D. Rc/NPT size O.D. Rc/NPT size
LQ1H11-Fl ø4 2.6 LQ1H1A-Fl 1/8" 1/8" 10 — 26.5 11.5 1.8 10 18.5
1/8" 10 — 26.5 11.5 10 18.5
LQ1H12-Fl ø3 1.8 LQ1H2A-Fl 1/4" 3.6
LQ1H21-Fl ø6 3.6 LQ1H2B-Fl 3/16" 1/8" 35 2.9 18.5
LQ1H22-Fl ø4 1/8" 35 2.6 18.5 LQ1H2C-Fl 1/8" 1.8
15 14 16.5 14
LQ1H2C-Fl ø3 1.8 LQ1H2D-Fl 1/4" 3.6
15 14 16.5 14
LQ1H23-Fl ø6 3.6 LQ1H2E-Fl 3/16" 1/4" 36.5 2.9 21.5
LQ1H24-Fl ø4 1/4" 36.5 2.6 21.5 LQ1H2F-Fl 1/8" 1.8
LQ1H2F-Fl ø3 1.8 LQ1H3A-Fl 3/8" 5.8
1/4" 21.5
LQ1H31-Fl ø10 7.4 LQ1H3B-Fl 1/4" 3.6
LQ1H32-Fl ø8 1/4" 5.5 21.5 LQ1H3C-Fl 3/8" 20 17 42.5 23 5.8 19
3/8" 25
LQ1H33-Fl ø6 3.6 LQ1H3D-Fl 1/4" 3.6
LQ1H34-Fl ø10 7.4 LQ1H3F-Fl 3/8" 1/8" 5.8 18.5
20 17 42.5 23 19
LQ1H35-Fl ø8 3/8" 5.5 25 LQ1H4A-Fl 1/2" 9
3/8" 47.5 25
LQ1H36-Fl ø6 3.6 LQ1H4B-Fl 3/8" 5.8
24 21 28
LQ1H39-Fl ø10 7.4 LQ1H4C-Fl 1/2" 9 23
1/8" 18.5 1/2" 50
LQ1H310-Fl ø8 5.5 LQ1H4D-Fl 3/8" 5.8 29.5
LQ1H41-Fl ø12 9.4 LQ1H4E-Fl 1/4" 1/2" 20 17 45.5 23 3.6
3/8" 47.5 25
LQ1H42-Fl ø10 7.4 LQ1H4G-Fl 1/2" 1/4" 29 26 56.5 39 9 32 21.5
24 21 28
LQ1H43-Fl ø12 9.4 LQ1H4H-Fl 1/2" 1/8" 24 21 46.5 28 8.2 23 18.5
50 23
LQ1H44-Fl ø10 7.4 LQ1H5A-Fl 3/4" 15
1/2" 29.5 1/2" 58.5 29.5
LQ1H45-Fl ø8 5.5 LQ1H5B-Fl 1/2" 9
20 17 45.5 23
LQ1H46-Fl ø6 3.6 LQ1H5C-Fl 3/4" 15
3/4" 29 26 60 39 32 36
LQ1H49-Fl ø12 1/4" 29 26 56.5 39 9.4 32 21.5 LQ1H5D-Fl 1/2" 9
LQ1H410-Fl ø12 1/8" 24 21 46.5 28 8.2 23 18.5 LQ1H5G-Fl 3/4" 1/4" 56.5 10.7 21.5
LQ1H51-Fl ø19 15 LQ1H5H-Fl 3/4" 3/8" 56 14 25
1/2" 58.5 29.5
LQ1H52-Fl ø12 9.4 LQ1H6A-Fl 1" 21.2
3/4" 75 36
LQ1H53-Fl ø19 15 LQ1H6B-Fl 3/4" 15
3/4" 29 26 60 39 32 36 39.5 36 49 46
LQ1H54-Fl ø12 9.4 LQ1H6C-Fl 1" 21.2
1" 78.5 44.5
LQ1H58-Fl ø19 1/4" 56.5 10.7 21.5 LQ1H6D-Fl 3/4" 15
LQ1H59-Fl ø19 3/8" 56 14 25
LQ1H61-Fl ø25 21.2
3/4" 75 36
LQ1H62-Fl ø19 15
39.5 36 49 46
LQ1H63-Fl ø25 21.2
1" 78.5 44.5
LQ1H64-Fl ø19 15

A 878
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

Male Elbow: LQ1L-M


øM

1/8
Port size
R (NPT) Class 1 LVC
L1
øM
øN
LVA

H
LVH
L2

øM
(A)

1/4 1 25 (A) shows the reference dimension after LVD


H connection.
(E)
(E) shows the approximate dimension of the LVQ
Class 2 to 5 Class 6 inserted tubing from the end of the nut.
LVP
Metric sizes Inch sizes
Applicable Connection Min. Applicable Connection Min. LVW
Model tubing threads A E H L1 L2 M N port Model tubing threads A E H L1 L2 M N port
O.D. R/NPT size O.D. R/NPT size
LQ1L11-Ml ø4 2.6 LQ1L1A-Ml 1/8" 1/8" 11.5 10 — 18 15 11.5 4 1.8
LQ1
1/8" 11.5 10 — 18 15 11.5 4
LQ1L12-Ml ø3 1.8 LQ1L2A-Ml 1/4" 3.6
LQ1L21-Ml ø6 3.6 LQ1L2B-Ml 3/16" 1/8" 4.4 2.9
LQ3
LQ1L22-Ml ø4 1/8" 4.4 2.6 LQ1L2C-Ml 1/8" 1.8
LQ1L2C-Ml ø3 1.8 LQ1L2D-Ml 1/4"
14.5 15 14 27 20.5 16.5
3.6
LVN
14.5 15 14 27 20.5 16.5
LQ1L23-Ml ø6 3.6 LQ1L2E-Ml 3/16" 1/4" 6 2.9
LQ1L24-Ml ø4 1/4" 6 2.6 LQ1L2F-Ml 1/8" 1.8
LQHB
LQ1L2F-Ml ø3 1.8 LQ1L3A-Ml 3/8" 5.8 TL
1/4" 6 TIL
LQ1L31-Ml ø10 6 LQ1L3B-Ml 1/4" 3.6
20 20 17 35 26.5 23
LQ1L32-Ml ø8 1/4" 6 5.5 LQ1L3C-Ml 3/8" 5.8 TLM
LQ1L33-Ml ø6 3.6 LQ1L3D-Ml 1/4" 3/8" 8 3.6 TILM
20 20 17 35 26.5 23
LQ1L34-Ml ø10 7.4 LQ1L3E-Ml 1/8" 21.1 15 14 31.6 27.1 16.5 1.8 TD
LQ1L35-Ml ø8 5.5 Note 2) LQ1L3F-M 3/8" 1/8" 20.6 20 17 36.6 24.1 23 4 4 TID
LQ1L36-Ml ø6 3/8" 8 3.6 LQ1L4A-Ml 1/2" 8 TH
3/8" 8 TIH
LQ1L37-Ml ø4 2.6 LQ1L4B-Ml 3/8" 5.8
21.1 15 14 31.6 27.1 16.5 25 24 21 45 33 28
LQ1L3E-Ml ø3 1.8 LQ1L4C-Ml 1/2" 9
Note 2) LQ1L39-M ø10 4 LQ1L4D-Ml 3/8" 5.8
1/8" 20.6 20 17 36.6 24.1 23 4 1/2" 10
Note 2) LQ1L310-M ø8 4 LQ1L4E-Ml 1/4" 24.1 20 17 38.5 32.1 23 3.6
LQ1L41-Ml ø12 8 ∗ LQ1L4F-Ml 1/8" 17.5 15 14 30 25.5 16.5 1.8
3/8" 8
LQ1L42-Ml ø10 7.4 LQ1L4G-Ml 1/2" 1/4" 22.6 24 21 43 28.6 28 6 9
25 24 21 45 33 28
LQ1L43-Ml ø12 9.4 LQ1L5A-Ml 3/4" 10
1/2" 10
LQ1L44-Ml ø10 7.4 LQ1L5B-Ml 1/2" 9
29 26 54 40 39
LQ1L45-Ml ø8 5.5 LQ1L5C-Ml 3/4" 15
1/2" 24.1 20 17 38.5 32.1 23 10 30.5
LQ1L46-Ml ø6 3.6 LQ1L5D-Ml 1/2" 9
3/4" 16
∗ LQ1L47-Ml ø4 2.6 LQ1L5E-Ml 3/8" 5.8
17.5 15 14 30 25.5 16.5 20 17 44 39.5 23
∗ LQ1L4F-Ml ø3 1.8 LQ1L5F-Ml 1/4" 3.6
LQ1L49-Ml ø12 1/4" 22.6 24 21 43 28.6 28 6 6 ∗ LQ1L5H-Ml 3/4" 3/8" 34 39.5 36 53 40 49 8 8
LQ1L51-Ml ø19 10 LQ1L6A-Ml 1" 16
1/2" 10 3/4" 16
LQ1L52-Ml ø12 9.4 LQ1L6B-Ml 3/4" 15
29 26 54 40 39 35 39.5 36 68.5 46 49
LQ1L53-Ml ø19 15 LQ1L6C-Ml 1" 21.2
LQ1L54-Ml ø12 30.5 9.4 LQ1L6D-Ml 3/4" 1" 22.5 15
LQ1L55-Ml ø10 3/4" 16 7.4 LQ1L6E-Ml 1/2" 37 29 26 60 47 39 9
LQ1L56-Ml ø8 20 17 44 39.5 23 5.5 ∗ LQ1L6G-Ml 1" 3/8" 34 39.5 36 53 40 49 8 8
LQ1L57-Ml ø6 3.6 Note 1) Products marked “∗” are produced upon receipt of order.
∗ LQ1L59-Ml ø19 3/8" 34 39.5 36 53 40 49 8 8 (The body of the fitting is PTFE machined.)
LQ1L61-Ml ø25 16 Note 2) NPT is not available for the thead type.
3/4" 16
LQ1L62-Ml ø19 15
35 39.5 36 68.5 46 49
LQ1L63-Ml ø25 21.2
LQ1L64-Ml ø19 1" 22.5 15
LQ1L65-Ml ø12 37 29 26 60 47 39 9.4
∗ LQ1L67-Ml ø25 3/8" 34 39.5 36 53 40 49 8 8
Note 1) Products marked “∗” are produced upon receipt of order. (The body of the fitting is PTFE machined.)
Note 2) NPT is not available for the thead type.
879 A
LQ1 Series

Dimensions
Female Elbow: LQ1L-F
øM

1/8

Class 1 H
Port size
øY Rc (NPT)

øB
L2

øM
C

1/4
øM 1 25
C (E)
H
L1 (E) shows the reference dimension of the
Class 2 to 5 Class 6 inserted tubing from the end of the nut.

Metric sizes Inch sizes


Applicable Connection Min. Applicable Connection Min.
Model tubing threads B C E H L1 L2 M port Y Model tubing threads B C E H L1 L2 M port Y
O.D. Rc/NPT size O.D. Rc/NPT size
LQ1L11-Fl ø4 2.6 LQ1L1A-Fl 1/8" 1/8" 2 4 10 — 18.5 16 11.5 1.8 18.5
1/8" 2 4 10 — 18.5 16 11.5 18.5
LQ1L12-Fl ø3 1.8 LQ1L2A-Fl 1/4" 3.6
LQ1L21-Fl ø6 3.6 LQ1L2B-Fl 3/16" 1/8" 19.5 2.9 18.5
LQ1L22-Fl ø4 1/8" 19.5 2.6 18.5 LQ1L2C-Fl 1/8" 1.8
4 6 15 14 28 16.5
LQ1L2C-Fl ø3 1.8 LQ1L2D-Fl 1/4" 3.6
4 6 15 14 28 16.5
LQ1L23-Fl ø6 3.6 LQ1L2E-Fl 3/16" 1/4" 22 2.9 21.5
LQ1L24-Fl ø4 1/4" 22 2.6 21.5 LQ1L2F-Fl 1/8" 1.8
LQ1L2F-Fl ø3 1.8 LQ1L3A-Fl 3/8" 5.8
1/4" 22 21.5
LQ1L31-Fl ø10 7.4 LQ1L3B-Fl 1/4" 3.6
20 17 36.5 23
LQ1L32-Fl ø8 1/4" 22 5.5 21.5 LQ1L3C-Fl 3/8" 5.8
5 9
LQ1L33-Fl ø6 3.6 LQ1L3D-Fl 1/4" 3/8" 24.5 3.6 25
20 17 36.5 23
LQ1L34-Fl ø10 7.4 LQ1L3E-Fl 1/8" 31.6 16.5 1.8
15 14
LQ1L35-Fl ø8 5 9 24.5 5.5 Note) LQ1L3F-F 3/8" 1/8" 36.6 21.8 23 5.8 18.5
3/8" 25
LQ1L36-Fl ø6 3.6 LQ1L4A-Fl 1/2" 9
3/8" 25.5 25
LQ1L3E-Fl ø3 15 14 31.6 24.5 16.5 1.8 LQ1L4B-Fl 3/8" 5.8
Note) LQ1L39-F ø10 7.4 LQ1L4C-Fl 1/2" 9
1/8" 20 17 36.6 21.8 23 18.5 1/2" 6 9 24 21 43 30.5 28 29.5
Note) LQ1L310-F ø8 5.5 LQ1L4D-Fl 3/8" 5.8
LQ1L41-Fl ø12 9.4 LQ1L4G-Fl 1/2" 1/4" 9 21.5
3/8" 25.5 25 23.8
LQ1L42-Fl ø10 7.4 LQ1L4H-Fl 1/2" 1/8" 8 18.5
LQ1L43-Fl ø12 9.4 LQ1L5A-Fl 3/4" 15
1/2" 6 9 24 21 43 30.5 28 29.5 1/2" 35.5 29.5
LQ1L44-Fl ø10 7.4 LQ1L5B-Fl 1/2" 9
LQ1L49-Fl ø12 1/4" 9.4 21.5 LQ1L5C-Fl 3/4" 7 14 29 26 54 39 15
23.8 3/4" 37 36
LQ1L410-Fl ø12 1/8" 8 18.5 LQ1L5D-Fl 1/2" 9
LQ1L51-Fl ø19 15 LQ1L5H-Fl 3/4" 3/8" 30.5 14 25
1/2" 35.5 29.5
LQ1L52-Fl ø12 9.4 LQ1L6A-Fl 1" 21.2
3/4" 42.5 36
LQ1L53-Fl ø19 7 14 29 26 54 39 15 LQ1L6B-Fl 3/4" 15
3/4" 37 36 8 18 39.5 36 69.5 49
LQ1L54-Fl ø12 9.4 LQ1L6C-Fl 1" 21.2
1" 46 44.5
LQ1L59-Fl ø19 3/8" 30.5 14 25 LQ1L6D-Fl 3/4" 15
LQ1L61-Fl ø25 21.2 Note) NPT is not available for the thead type.
3/4" 42.5 36
LQ1L62-Fl ø19 15
8 18 39.5 36 69.5 49
LQ1L63-Fl ø25 21.2
1" 46 44.5
LQ1L64-Fl ø19 15
Note) NPT is not available for the thead type.

A 880
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

Male Run Tee: LQ1R-M


øM

1/8

Class 1 LVC
LVA
(E)

2 x øB
øM
L1

LVH

H
øM
F

LVD
øN

G 1/4

(A) (E) 1 25 (A) shows the reference dimension after LVQ


H connection.
L2 L1
Class 2 to 5 Class 6
(E) shows the approximate dimension of the
inserted tubing from the end of the nut.
LVP
Port size
R (NPT) LVW
Metric sizes Inch sizes
LQ1
Applicable Connection Min. Applicable Connection Min.
Model tubing threads A B E F G H L1 L2 M N port Model tubing threads A B E F G H L1 L2 M N port
O.D. R/NPT size O.D. R/NPT size LQ3
LQ1R11-M ø4 3 2.6 LQ1R1A-M 1/8" 1/8" 12 2 10 4 8 — 18.5 15.5 11.5 2 1.8
LQ1R12-M ø3
1/8" 12 2 10 4 8 — 18.5 15.5 11.5
2 1.8 LQ1R2A-M 1/4" 3.6 LVN
LQ1R21-M ø6 3.6 LQ1R2B-M 3/16" 1/8" 19.5 2.9
LQ1R22-M ø4 1/8" 19.5 2.6 LQ1R2C-M 1/8" 1.8 LQHB
16 4 15 6 12 14 28 16.5 4.4
LQ1R2C-M ø3 1.8 LQ1R2D-M 1/4" 3.6 TL
16 4 15 6 12 14 28 16.5 4.4
LQ1R23-M ø6 3.6 LQ1R2E-M 3/16" 1/4" 22 2.9 TIL
LQ1R24-M ø4 1/4" 22 2.6 LQ1R2F-M 1/8" 1.8 TLM
LQ1R2F-M ø3 1.8 LQ1R3A-M 3/8" 5.8 TILM
1/4" 19 25
LQ1R31-M ø10 7.4 LQ1R3B-M 1/4" 3.6 TD
5 9 18 36.5 8
LQ1R32-M ø8 1/4" 19 25 5.5 LQ1R3C-M 3/8" 20 17 23 5.8 TID
3/8" 21 27
LQ1R33-M ø6 3.6 LQ1R3D-M 1/4" 3.6 TH
5 9 18 36.5 8 ∗ LQ1R3F-M
LQ1R34-M ø10 7.4 3/8" 1/8" 17 — — — 34.5 20.5 4.4 4.4 TIH
20 17 23
LQ1R35-M ø8 3/8" 21 27 5.5 LQ1R4A-M 1/2" 9
3/8" 23 29
LQ1R36-M ø6 3.6 LQ1R4B-M 3/8" 5.8
∗ LQ1R39-M
6 24 9 18 21 43 28 10
ø10 4.4 LQ1R4C-M 1/2" 9
∗ LQ1R310-M
1/8" 17 — — — 34.5 20.5 4.4 1/2" 24.5 32
ø8 4.4 LQ1R4D-M 3/8" 5.8
LQ1R41-M ø12 9.4 LQ1R4G-M 1/2" 1/4" 27.5 7 29 14 28 26 54 33.5 39 6 6
3/8" 23 29
LQ1R42-M ø10 7.4 LQ1R5A-M 3/4" 10
6 24 9 18 21 43 28 10 1/2" 30.5 38 10
LQ1R43-M ø12 9.4 LQ1R5B-M 1/2" 9
1/2" 24.5 32
LQ1R44-M ø10 7.4 LQ1R5C-M 3/4" 15
3/4" 30 7 29 14 28 26 54 39 39 16
LQ1R49-M ø12 1/4" 27.5 7 29 14 28 26 54 33.5 39 6 6 LQ1R5D-M 1/2" 9
LQ1R51-M ø19 10 LQ1R5G-M 3/4" 1/4" 27.5 33.5 6 6
1/2" 30.5 38 10
LQ1R52-M ø12 9.4 LQ1R5H-M 3/4" 3/8" 29 35 10 10
LQ1R53-M ø19 15 LQ1R6A-M 1" 16
3/4" 30 7 29 14 28 26 54 39 39 16 3/4" 36 16
LQ1R54-M ø12 9.4 LQ1R6B-M 3/4" 15
8 39.5 18 36 36 69.5 45 49
LQ1R58-M ø19 1/4" 27.5 33.5 6 6 LQ1R6C-M 1" 21.2
1" 35 22.5
LQ1R59-M ø19 3/8" 29 35 10 10 LQ1R6D-M 3/4" 15
LQ1R61-M ø25 16 Note) Products marked “∗” are produced upon receipt of order.
3/4" 36 16
LQ1R62-M ø19 15 (The body of the fitting is PTFE machined.)
8 39.5 18 36 36 69.5 45 49
LQ1R63-M ø25 21.2
1" 35 22.5
LQ1R64-M ø19 15
Note) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.)

881 A
LQ1 Series

Dimensions
Female Run Tee: LQ1R-F
øM

1/8

Class 1
H
(E)

2 x øB
(L1)

øM
F
øY

øM
1/4
1 25
G (E) H
(E) shows the approximate dimension of the
L2 L1 Class 2 to 5 Class 6 inserted tubing from the end of the nut.
Port size
Rc (NPT)

Metric sizes Inch sizes


Applicable Connection Min. Applicable Connection Min.
Model tubing threads B E F G H L1 L2 M port Y Model tubing threads B E F G H L1 L2 M port Y
O.D. Rc/NPT size O.D. Rc/NPT size
LQ1R11-F ø4 2.6 LQ1R1A-F 1/8" 1/8" 2 10 4 8 — 18.5 16 11.5 1.8 18.5
1/8" 2 10 4 8 — 18.5 16 11.5 18.5
LQ1R12-F ø3 1.8 LQ1R2A-F 1/4" 3.6
LQ1R21-F ø6 3.6 LQ1R2B-F 3/16" 1/8" 19.5 2.9 18.5
LQ1R22-F ø4 1/8" 19.5 2.6 18.5 LQ1R2C-F 1/8" 1.8
4 15 6 12 14 28 16.5
LQ1R2C-F ø3 1.8 LQ1R2D-F 1/4" 3.6
4 15 6 12 14 28 16.5
LQ1R23-F ø6 3.6 LQ1R2E-F 3/16" 1/4" 22 2.9 21.5
LQ1R24-F ø4 1/4" 22 2.6 21.5 LQ1R2F-F 1/8" 1.8
LQ1R2F-F ø3 1.8 LQ1R3A-F 3/8" 5.8
1/4" 24 21.5
LQ1R31-F ø10 7.4 LQ1R3B-F 1/4" 3.6
5 9 18 36.5
LQ1R32-F ø8 1/4" 24 5.5 21.5 LQ1R3C-F 3/8" 20 17 23 5.8
3/8" 25.5 25
LQ1R33-F ø6 3.6 LQ1R3D-F 1/4" 3.6
5 9 18 36.5 ∗ LQ1R3F-F
LQ1R34-F ø10 7.4 3/8" 1/8" — — — 34.5 19.7 5.8 18.5
20 17 23
LQ1R35-F ø8 3/8" 25.5 5.5 25 LQ1R4A-F 1/2" 9
3/8" 25 25
LQ1R36-F ø6 3.6 LQ1R4B-F 3/8" 5.8
∗ LQ1R39-F
6 9 18 43
ø10 7.4 LQ1R4C-F 1/2" 24 21 28 9
∗ LQ1R310-F
1/8" — — — 34.5 19.7 18.5 1/2" 31.5 29.5
ø8 5.5 LQ1R4D-F 3/8" 5.8
LQ1R41-F ø12 9.4 ∗ LQ1R4G-F 1/2" 1/4" — — — 41.5 21.2 9 21.5
3/8" 25 25
LQ1R42-F ø10 7.4 LQ1R5A-F 3/4" 15
6 9 18 43 1/2" 35.5 29.5
LQ1R43-F ø12 24 21 28 9.4 LQ1R5B-F 1/2" 9
1/2" 31.5 29.5
LQ1R44-F ø10 7.4 LQ1R5C-F 3/4" 7 29 14 28 26 54 39 15
∗ LQ1R49-F
3/4" 37 36
ø12 1/4" — — — 41.5 21.2 9.4 21.5 LQ1R5D-F 1/2" 9
LQ1R51-F ø19 15 LQ1R5H-F 3/4" 3/8" 30.5 14 25
1/2" 35.5 29.5
LQ1R52-F ø12 9.4 LQ1R6A-F 1" 21.2
3/4" 42.5 36
LQ1R53-F ø19 7 29 14 28 26 54 39 15 LQ1R6B-F 3/4" 15
3/4" 37 36 8 39.5 18 36 36 69.5 49
LQ1R54-F ø12 9.4 LQ1R6C-F 1" 21.2
1" 46 44.5
LQ1R59-F ø19 3/8" 30.5 14 25 LQ1R6D-F 3/4" 15
LQ1R61-F ø25 21.2 Note) Products marked “∗” are produced upon receipt of order.
3/4" 42.5 36
LQ1R62-F ø19 15 (The body of the fitting is PTFE machined.)
LQ1R63-F ø25 8 39.5 18 36 36 69.5 49 21.2
1" 46 44.5
LQ1R64-F ø19 15
LQ1R66-F ø25 1/2" 41 17.8 29.5
Note) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.)

A 882
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

Male Branch Tee: LQ1B-M

øM
1/8
LVC
Class 1 LVA
øN Port size
R (NPT) øM LVH
2 x øB

H
øM LVD
L2
(A)
F

1/4
1 25
(A) shows the reference dimension after
connection.
LVQ
(E) G (E) H
(E) shows the approximate dimension of the
L1 L1
Class 2 to 5 Class 6 inserted tubing from the end of the nut. LVP
LVW
Metric sizes Inch sizes
LQ1
Applicable Connection Min. Applicable Connection Min.
Model tubing threads A B E F G H L1 L2 M N port Model tubing threads A B E F G H L1 L2 M N port
O.D. R/NPT size O.D. R/NPT size LQ3
LQ1B11-M ø4 3 2.6 LQ1B1A-M 1/8" 1/8" 12 2 10 4 8 — 18.5 15.5 11.5 2 1.8
LQ1B12-M ø3
1/8" 12 2 10 4 8 — 18.5 15.5 11.5
2 1.8 LQ1B2A-M 1/4" 3.6 LVN
LQ1B21-M ø6 3.6 LQ1B2B-M 3/16" 1/8" 19.5 2.9
LQ1B22-M ø4 1/8" 19.5 2.6 LQ1B2C-M 1/8" 1.8 LQHB
16 4 15 6 12 14 28 16.5 4.4
LQ1B2C-M ø3 1.8 LQ1B2D-M 1/4" 3.6 TL
16 4 15 6 12 14 28 16.5 4.4
LQ1B23-M ø6 3.6 LQ1B2E-M 3/16" 1/4" 22 2.9 TIL
LQ1B24-M ø4 1/4" 22 2.6 LQ1B2F-M 1/8" 1.8 TLM
LQ1B2F-M ø3 1.8 LQ1B3A-M 3/8" 5.8 TILM
1/4" 19 25
LQ1B31-M ø10 7.4 LQ1B3B-M 1/4" 3.6 TD
5 9 18 36.5 8
LQ1B32-M ø8 1/4" 19 25 5.5 LQ1B3C-M 3/8" 20 17 23 5.8 TID
3/8" 21 27
LQ1B33-M ø6 3.6 LQ1B3D-M 1/4" 3.6 TH
5 9 18 36.5 8 ∗ LQ1B3F-M
LQ1B34-M ø10 7.4 3/8" 1/8" 18.4 — — — 29 21.9 4.4 4.4 TIH
20 17 23
LQ1B35-M ø8 3/8" 21 27 5.5 LQ1B4A-M 1/2" 9
3/8" 23 29
LQ1B36-M ø6 3.6 LQ1B4B-M 3/8" 5.8
∗ LQ1B39-M
6 24 9 18 21 43 28 10
ø10 4.4 LQ1B4C-M 1/2" 9
∗ LQ1B310-M
1/8" 18.4 — — — 29 21.9 4.4 1/2" 24.5 32
ø8 4.4 LQ1B4D-M 3/8" 5.8
LQ1B41-M ø12 9.4 LQ1B4G-M 1/2" 1/4" 27.5 7 29 14 28 26 54 33.5 39 6 6
3/8" 23 29
LQ1B42-M ø10 7.4 LQ1B5A-M 3/4" 10
6 24 9 18 21 43 28 10 1/2" 30.5 38 10
LQ1B43-M ø12 9.4 LQ1B5B-M 1/2" 9
24.5 32
LQ1B44-M ø10 1/2" 7.4 LQ1B5C-M 3/4" 15
∗ LQ1B45-M
3/4" 30 7 29 14 28 26 54 39 39 16
ø8 21.5 — 20 — — 17 34 29.5 23 8 5.5 LQ1B5D-M 1/2" 9
LQ1B49-M ø12 1/4" 27.5 7 29 14 28 26 54 33.5 39 6 6 LQ1B5G-M 3/4" 1/4" 27.5 33.5 6 6
LQ1B51-M ø19 10 LQ1B5H-M 3/4" 3/8" 29 35 10 10
1/2" 30.5 38 10
LQ1B52-M ø12 9.4 LQ1B6A-M 1" 16
3/4" 36 16
LQ1B53-M ø19 15 LQ1B6B-M 3/4" 15
3/4" 30 7 29 14 28 26 54 39 39 16
LQ1B54-M ø12 9.4 LQ1B6C-M 1" 8 39.5 18 36 36 69.5 45 49 21.2
1" 35 22.5
LQ1B58-M ø19 1/4" 27.5 33.5 6 6 LQ1B6D-M 3/4" 15
LQ1B59-M ø19 3/8" 29 35 10 10 LQ1B6F-M 1" 1/2" 37 10 10
LQ1B61-M ø25 16 Note) Products marked “∗” are produced upon receipt of order.
3/4" 36 16
LQ1B62-M ø19 15 (The body of the fitting is PTFE machined.)
LQ1B63-M ø25 8 39.5 18 36 36 69.5 45 49 21.2
1" 35 22.5
LQ1B64-M ø19 15
LQ1B66-M ø25 1/2" 37 10 10
Note) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.)

883 A
LQ1 Series

Dimensions
Female Branch Tee: LQ1B-F

øM

1/8

Class 1

øY
Port size H
Rc (NPT)
2 x øB
L2

N
øM
F

SMC

1/4
øM 1 25
(E) G (E) H
(E) shows the approximate dimension of the
L1 L1
Class 2 to 5 Class 6 inserted tubing from the end of the nut.

Metric sizes Inch sizes


Applicable Connection Min. Applicable Connection Min.
Model tubing threads B E F G H L1 L2 M port Y Model tubing threads B E F G H L1 L2 M port Y
O.D. Rc/NPT size O.D. Rc/NPT size
LQ1B11-F ø4 2.6 LQ1B1A-F 1/8" 1/8" 2 10 4 8 — 18.5 16 11.5 1.8 18.5
1/8" 2 10 4 8 — 18.5 16 11.5 18.5
LQ1B12-F ø3 1.8 LQ1B2A-F 1/4" 3.6
LQ1B21-F ø6 3.6 LQ1B2B-F 3/16" 1/8" 19.5 2.9 18.5
LQ1B22-F ø4 1/8" 19.5 2.6 18.5 LQ1B2C-F 1/8" 1.8
4 15 6 12 14 28 16.5
LQ1B2C-F ø3 1.8 LQ1B2D-F 1/4" 3.6
4 15 6 12 14 28 16.5
LQ1B23-F ø6 3.6 LQ1B2E-F 3/16" 1/4" 22 2.9 21.5
LQ1B24-F ø4 1/4" 22 2.6 21.5 LQ1B2F-F 1/8" 1.8
LQ1B2F-F ø3 1.8 LQ1B3A-F 3/8" 5.8
1/4" 23.7 21.5
LQ1B31-F ø10 7.4 LQ1B3B-F 1/4" 3.6
5 9 18 36.5
LQ1B32-F ø8 1/4" 23.7 5.5 21.5 LQ1B3C-F 3/8" 20 17 23 5.8
3/8" 25.5 25
LQ1B33-F ø6 3.6 LQ1B3D-F 1/4" 3.6
5 9 18 36.5
LQ1B34-F ø10 7.4 ∗ LQ1B3F-F 3/8" 1/8" — — — 32.3 18.7 5.8 18.5
20 17 23
LQ1B35-F ø8 3/8" 25.5 5.5 25 LQ1B4A-F 1/2" 9
3/8" 25 25
LQ1B36-F ø6 3.6 LQ1B4B-F 3/8" 5.8
6 24 9 18 21 43 28
∗ LQ1B39-F ø10 7.4 LQ1B4C-F 1/2" 9
1/8" — — — 32.3 18.7 18.5 1/2" 31.5 29.5
∗ LQ1B310-F ø8 5.5 LQ1B4D-F 3/8" 5.8
LQ1B41-F ø12 9.4 ∗ LQ1B4G-F 1/2" 1/4" — 29 — — 26 44.3 27.5 39 9 21.5
3/8" 25 25
LQ1B42-F ø10 7.4 LQ1B5A-F 3/4" 10
6 24 9 18 21 43 28 1/2" 35.5 29.5
LQ1B43-F ø12 9.4 LQ1B5B-F 1/2" 9
1/2" 31.5 29.5 7 14 28 54
LQ1B44-F ø10 7.4 LQ1B5C-F 3/4" 15
3/4" 29 26 37 39 36
∗ LQ1B49-F ø12 1/4" — 29 — — 26 44.3 27.5 39 9.4 21.5 LQ1B5D-F 1/2" 9
LQ1B51-F ø19 10 ∗ LQ1B5G-F 3/4" 1/4" 44.3 27.5 10.9 21.5
1/2" 35.5 29.5 — — —
LQ1B52-F ø12 9.4 ∗ LQ1B5H-F 3/4" 3/8" 46 29.5 14.3 25
7 14 28 54
LQ1B53-F ø19 15 LQ1B6A-F 1" 16
3/4" 29 26 37 39 36 3/4" 42.5 36
LQ1B54-F ø12 9.4 LQ1B6B-F 3/4" 15
∗ LQ1B58-F ø19 1/4" 44.3 27.5 10.9 21.5 LQ1B6C-F 1" 8 39.5 18 36 36 69.5 49 21.2
— — — 1" 46 44.5
∗ LQ1B59-F ø19 3/8" 46 29.5 14.3 25 LQ1B6D-F 3/4" 15
LQ1B61-F ø25 16 LQ1B6F-F 1" 1/2" 41 10 29.5
3/4" 42.5 36
LQ1B62-F ø19 15 Note) Products marked “∗” are produced upon receipt of order.
LQ1B63-F ø25 8 39.5 18 36 36 69.5 49 21.2 (The body of the fitting is PTFE machined.)
1" 46 44.5
LQ1B64-F ø19 15
LQ1B66-F ø25 1/2" 41 10 29.5
Note) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.)

A 884
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

Union Elbow: LQ1E


Metric sizes
Applicable
Min.
Model tubing B C E H L M
øM
port size
O.D.
LVC
1/8 LQ1E11 ø4 2.6
2 4 10 — 18.5 11.5
Class 1
LQ1E12 ø3 1.8 LVA
LQ1E21 ø6 3.6
LQ1E22 ø4 4 6 15 14 28 16.5 2.6 LVH
LQ1E2C ø3 1.8
øB LQ1E31 ø10 7.4 LVD
(E)

LQ1E32 ø8 5 9 20 17 36.5 23 5.5


L

øM LQ1E33 ø6 3.6 LVQ


LQ1E41 ø12 9.4
C

SMC

6 9 24 21 43 28
1/4
LQ1E42 ø10 7.4 LVP
C (E) H LQ1E51 ø19 15
7 14 29 26 54 39
L
Class 2 to 5
LQ1E52 ø12 9.4 LVW
LQ1E61 ø25 21.2
8 18 39.5 36 69.5 49
LQ1E62 ø19 15 LQ1
LQ3
Inch sizes
H

Applicable LVN
Min.
Model tubing B C E H L M
port size
O.D. LQHB
LQ1E1A 1/8" 2 4 10 — 18.5 11.5 1.8
øM 1 25 TL
LQ1E2A 1/4" 3.6 TIL
LQ1E2B 3/16" 4 6 15 14 28 16.5 2.9
Class 6 TLM
LQ1E2C 1/8" 1.8 TILM
LQ1E3A 3/8" 5.8
5 9 20 17 36.5 23 TD
LQ1E3B 1/4" 3.6 TID
LQ1E4A 1/2" 9
6 9 24 21 43 28 TH
LQ1E4B 3/8" 5.8 TIH
(E) shows the approximate dimension of the LQ1E5A 3/4" 15
7 14 29 26 54 39
inserted tubing from the end of the nut. LQ1E5B 1/2" 9
LQ1E6A 1" 21.2
8 18 39.5 36 69.5 49
LQ1E6B 3/4" 15

885 A
LQ1 Series

Dimensions
Union Tee: LQ1T
Metric sizes
Applicable
Min.
Model tubing B E F G H L M
øM port size
O.D.
1/8 LQ1T11 ø4 2.6
2 10 4 8 — 18.5 11.5
Class 1 LQ1T12 ø3 1.8
LQ1T21 ø6 3.6
LQ1T22 ø4 4 15 6 12 14 28 16.5 2.6
LQ1T2C ø3 1.8
LQ1T31 ø10 7.4
LQ1T32 ø8 5 20 9 18 17 36.5 23 5.5
(E)

2 x øB
LQ1T33 ø6 3.6
L

øM
LQ1T41 ø12 9.4
F

6 24 9 18 21 43 28
1/4 LQ1T42 ø10 7.4
(E) G (E) H LQ1T51 ø19 15
7 29 14 28 26 54 39
L L LQ1T52 ø12 9.4
Class 2 to 5
LQ1T61 ø25 21.2
8 39.5 18 36 36 69.5 49
LQ1T62 ø19 15

Inch sizes
øM
H

Applicable
Min.
Model tubing B E F G H L M
port size
O.D.
1 25 LQ1T1A 1/8" 2 10 4 8 — 18.5 11.5 1.8
LQ1T2A 1/4" 3.6
LQ1T2B 3/16" 4 15 6 12 14 28 16.5 2.9
Class 6 LQ1T2C 1/8" 1.8
LQ1T3A 3/8" 5.8
5 20 9 18 17 36.5 23
LQ1T3B 1/4" 3.6
LQ1T4A 1/2" 9
6 24 9 18 21 43 28
LQ1T4B 3/8" 5.8
(E) shows the approximate dimension of the LQ1T5A 3/4" 15
7 29 14 28 26 54 39
inserted tubing from the end of the nut. LQ1T5B 1/2" 9
LQ1T6A 1" 21.2
8 39.5 18 36 36 69.5 49
LQ1T6B 3/4" 15

A 886
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

Panel Mount Union: LQ1P


Metric sizes
Applicable Min.
øM Model tubing E H J K L1 L2 M port t W1 W2
O.D. size
1/8 LVC
LQ1P11 ø4 2.6
Class 1 10 — 6 10.5 17 44 11.5 8 11 13
LQ1P12 ø3 1.8 LVA
LQ1P21 ø6 3.6
J LQ1P22 ø4 15 14 6 14.5 23.5 55.5 16.5 2.6 8 15 17 LVH
Panel thickness (Max. t) LQ1P2C ø3 1.8
W2 W1 LQ1P31 ø10 7.4 LVD
øM LQ1P32 ø8 20 17 7 20.5 30 69 23 5.5 8 21 24
LQ1P33 ø6 3.6 LVQ
1/4 LQ1P41 ø12 9.4
(E) (E)
24 21 7 24.5 35 78.5 28 8 26 28
H LQ1P42 ø10 7.4 LVP
L1 LQ1P51 ø19 15
Class 2 to 5 29 26 9 36.5 43.5 100 39 9 39 43
L2 LQ1P52 ø12 9.4 LVW
LQ1P61 ø25 21.2
Panel hole diameter øK

39.5 36 10 48.5 58.5 133 49 10 51 55


LQ1P62 ø19 15 LQ1
LQ3
H

Inch sizes
Applicable Min. LVN
Model tubing E H J K L1 L2 M port t W1 W2
øM 1 25
O.D. size LQHB
LQ1P1A 1/8" 10 — 6 10.5 17 44 11.5 1.8 8 11 13
TL
Class 6 LQ1P2A 1/4" 3.6 TIL
LQ1P2B 3/16" 15 14 6 14.5 23.5 55.5 16.5 2.9 8 15 17
TLM
LQ1P2C 1/8" 1.8 TILM
LQ1P3A 3/8" 5.8
20 17 7 20.5 30 69 23 8 21 24 TD
LQ1P3B 1/4" 3.6 TID
LQ1P4A 1/2" 9
24 21 7 24.5 35 78.5 28 8 26 28 TH
(E) shows the approximate dimension of the LQ1P4B 3/8" 5.8 TIH
inserted tubing from the end of the nut. LQ1P5A 3/4" 15
29 26 9 36.5 43.5 100 39 9 39 43
“W” is width across flats dimension. LQ1P5B 1/2" 9
LQ1P6A 1" 21.2
39.5 36 10 48.5 58.5 133 49 10 51 55
LQ1P6B 3/4" 15

887 A
LQ1 Series

Dimensions
Union: LQ1U
Metric sizes
Applicable
øM Model tubing E H L M
Min.
W
port size
O.D.
1/8
LQ1U11 ø4 2.6
10 — 29 11.5 10
LQ1U12 ø3 1.8
Class 1 LQ1U21 ø6 3.6
LQ1U22 ø4 15 14 41 16.5 2.6 14
H LQ1U2C ø3 1.8
W
LQ1U31 ø10 7.4
øM
LQ1U32 ø8 20 17 54 23 5.5 19
1/4
LQ1U33 ø6 3.6
LQ1U41 ø12 9.4
(E) (E) 24 21 63 28 23
Class 2 to 5 LQ1U42 ø10 7.4
L
LQ1U51 ø19 15
29 26 77 39 32
LQ1U52 ø12 9.4
LQ1U61 ø25 21.2
39.5 36 102 49 46
LQ1U62 ø19 15
øM
Inch sizes
H

Applicable
Min.
Model tubing E H L M W
port size
O.D.
LQ1U1A 1/8" 10 — 29 11.5 1.8 10
1 25
LQ1U2A 1/4" 3.6
LQ1U2B 3/16" 15 14 41 16.5 2.9 14
LQ1U2C 1/8" 1.8
Class 6
LQ1U3A 3/8" 5.8
20 17 54 23 19
LQ1U3B 1/4" 3.6
LQ1U4A 1/2" 9
24 21 63 28 23
LQ1U4B 3/8" 5.8
(E) shows the approximate dimension of the LQ1U5A 3/4" 15
inserted tubing from the end of the nut. 29 26 77 39 32
LQ1U5B 1/2" 9
“W” is width across flats dimension.
LQ1U6A 1" 21.2
39.5 36 102 49 46
LQ1U6B 3/4" 15

Union Flange: LQ1F


L
Metric sizes
3 Applicable Min.
Model tubing E H J L N M W (T) X port
O.D. size
LQ1F41 ø12
SMC

60 9.4
28 30 53 21 33.1 34 12 10
(øW)
(M)
øJ

LQ1F42 ø10 58 7.4


N
SMC

3/4 19
LQ1F51 ø19 65.2 15
32 36 58 26 40 41 14 16
LQ1F52 ø12 63.2 9.4
øX

(E) H LQ1F61 ø25 21.2


(T) 39.5 36 69 81.5 — 49 51 14 22.5
JIS 10K flange Class 4, 5 LQ1F62 ø19 15
W Note)
H Inch sizes
Applicable Min.
Model tubing E H J L N M W (T) X port
O.D. size
LQ1F4A 1/2" 60 9
28 30 53 21 33.1 34 12 10
LQ1F4B 3/8" 58 5.8
LQ1F5A 3/4" 65.2 15
32 36 58 26 40 41 14 16
øM 1 25 LQ1F5B 1/2" 63.2 9
LQ1F6A 1" 21.2
39.5 36 69 81.5 — 49 51 14 22.5
LQ1F6B 3/4" 15
Class 6
(E) shows the approximate dimension of the inserted tubing from the end of the nut.
(W) is the bore size of the JIS flange required for mounting. This flange is sold separately.
When ordering nuts as spare parts, size 4 and 5 are as shown below.
LQ1F4: LQ-4N
LQ1F5: LQ-5N
A 888
LQ1 Series
Union Elbow Reducing
How to Order

Tubing
connection
LQ1 E 2 1 R1 LVC
LVA
Fitting type Packaging
Symbol Type Symbol Packaging LVH
E Union elbow Nil Clean packaging equivalent to Class M3.5
1 Standard packaging equivalent to Class M5.5 LVD
Body size
(according to the combination table)
Type of piping (according to the combination table) LVQ
Symbol Type
Tubing type R Reducing LVP
Symbol Type
1, 2 Metric LVW
A, B Inch
LQ1

Size combination (Metric) Size combination (Inch)


LQ3
A side B side A side B side
Class Model
Applicable tubing size (mm)
Class Model
Applicable tubing size (inch)
LVN
LQ1E41-R2 8x6 3 ∗ LQ1E3A-R3 3/8" x 1/4" 1/8" x 0.086"
4 ∗ LQ1E41-R3 12 x 10 6x4
LQHB
LQ1E4A-R2 1/4" x 5/32"
∗ LQ1E41-R4 4x2 4 ∗ LQ1E4A-R3 1/2" x 3/8" 3/16" x 0.127" TL
∗ LQ1E51-R2 10 x 8 ∗ LQ1E4A-R4 1/8" x 0.086" TIL
∗ LQ1E51-R3 8x6 ∗ LQ1E5A-R2 3/8" x 1/4" TLM
5 19 x 16 TILM
∗ LQ1E51-R4 6x4 5 ∗ LQ1E5A-R3 3/4" x 5/8" 1/4" x 5/32"
∗ LQ1E51-R5 4x3 ∗ LQ1E5A-R4 3/16" x 0.127" TD
∗ LQ1E61-R2 12 x 10 ∗ LQ1E6A-R2 1/2" x 3/8" TID
∗ LQ1E61-R3 10 x 8 ∗ LQ1E6A-R3 3/8" x 1/4" TH
6 25 x 22 6 1"×7/8" TIH
∗ LQ1E61-R4 8x6 ∗ LQ1E6A-R4 1/4" x 5/32"
∗ LQ1E61-R5 6x4 ∗ LQ1E6A-R5 3/16" x 0.127"
Note 1) Products marked “∗” are produced upon receipt of order. Note 1) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.) (The body of the fitting is PTFE machined.)
Note 2) For details of the applicable tubing sizes, refer to page 945. Note 2) For details of the applicable tubing sizes, refer to page 945.

889
LQ1 Series

Dimensions
Union Elbow Reducing:
LQ1E-R Metric Size
A side B side
Model B C1 C2 E1 E2 H1 H2 L1 L2 M1 M2 portMin.size W
Applicable tubing O.D.
LQ1E41-R2 ø12 ø8 6 9 9 20 17 43 38.5 23 5.5 —
∗ LQ1E41-R3 ø12 ø6 24 21 28 3.6
— — — 15 14 35.5 31.5 16.5 25
1
øM

∗ LQ1E41-R4 ø12 ø4 2.6


∗ LQ1E51-R2 ø19 ø10 56.5 52.5 7.4
— — — 39.5 20 36 17 49 23 46
12
H1

∗ LQ1E51-R3 ø19 ø8 54 47.5 5.5


10

∗ LQ1E51-R4 ø19 ø6 3.6


— — — 39.5 15 36 14 42 39 16.5 32
∗ LQ1E51-R5 ø19 ø4 51 2.6
∗ LQ1E61-R2 ø25 ø12 24 21 56.5 52.5 28 9.4
A side ∗ LQ1E61-R3 ø25 ø10 7.4
— — — 39.5 20 36 17 54 47.5 49 23 46
∗ LQ1E61-R4 ø25 ø8 5.5
∗ LQ1E61-R5 ø25 ø6 15 15 51 42 16.5 3.6
(E1)

Note) Products marked “∗” are produced upon receipt of order.


øB (The body of the fitting is PTFE machined.)
L1

W
øM
2
C1

B side Inch Size


6 4

A side B side
C2 (E2) H2 Model B C1 C2 E1 E2 H1 H2 L1 L2 M1 M2 portMin.size W
Applicable tubing O.D.
L2
Class 3 to 5 ∗ LQ1E3A-R3 3/8" 1/8" — — — 24 15 21 14 35.5 31.5 28 16.5 1.8 —
LQ1E4A-R2 1/2" 1/4" 6 9 9 20 17 43 38.5 23 3.6 —
∗ LQ1E4A-R3 1/2" 3/16" 24 21 28 2.9
— — — 15 14 35.5 31.5 16.5 —
∗ LQ1E4A-R4 1/2" 1/8" 1.8
∗ LQ1E5A-R2 3/4" 3/8" 5.8
20 17 54 47.5 23
∗ LQ1E5A-R3 3/4" 1/4" — — — 39.5 36 49 3.6 46
∗ LQ1E5A-R4 3/4" 3/16" 15 14 51 42 16.5 2.9
∗ LQ1E6A-R2 1" 1/2" 24 21 56.5 52.5 28 9
∗ LQ1E6A-R3 1" 3/8" 5.8
— — — 39.5 20 36 17 54 47.5 49 23 46
1 25 ∗ LQ1E6A-R4 1" 1/4" 3.6
∗ LQ1E6A-R5 1" 3/16" 15 14 51 42 16.5 2.9
Note) Products marked “∗” are produced upon receipt of order.
Class 6 (The body of the fitting is PTFE machined.)

A 890
LQ1 Series
Union Tee Reducing
How to Order

Tubing
connection
LQ1 T 2 1 R1 LVC
Fitting type Packaging LVA
Symbol Type Symbol Packaging
Clean packaging equivalent to Class M3.5
T Union tee Nil
1 Standard packaging equivalent to Class M5.5
LVH
Body size LVD
(according to the combination table) Type of piping (according to the combination table)
Tubing type Symbol Type
Reducing
LVQ
Symbol Type R
1, 2 Metric
A, B Inch
LVP
LVW
Size combination (Metric) Size combination (Inch) LQ1
A side (Left) B side (Center) C side (Right) A side (Left) B side (Center) C side (Right)
Class Model Class Model
Applicable tubing size (mm) Applicable tubing size (inch)
LQ1T31-R4 10 x 8 3x2 10 x 8
3
LQ1T3A-R5 1/4" x 5/32" 3/8" x 1/4" 3/8" x 1/4" LQ3
LQ1T31-R7 8x6 8x6 10 x 8 LQ1T3A-R7 1/4" x 5/32" 1/4" x 5/32" 3/8" x 1/4"
6x4 10 x 8 1/2" x 3/8" 1/4" x 5/32" 1/2" x 3/8"
3
LQ1T31-R8
LQ1T32-R5 8x6 8x6
LQ1T4A-R2
LQ1T4A-R4 1/2" x 3/8" 1/8" x 0.086" 1/2" x 3/8" LVN
6x4
LQ1T32-R6 10 x 8 10 x 8 LQ1T4A-R5 3/8" x 1/4" 1/2" x 3/8"
1/2" x 3/8"
LQ1T32-R7
LQ1T41-R2
6x4
8x6
8x6
12 x 10
4
LQ1T4A-R6
LQ1T4A-R7
1/4" x 5/32"
3/8" x 1/4" 3/8" x 1/4"
1/2" x 3/8"
1/2" x 3/8"
LQHB
12 x 10
LQ1T41-R3 6x4 12 x 10 LQ1T4A-R8 1/4" x 5/32" 1/4" x 5/32" 1/2" x 3/8" TL
LQ1T41-R5 12 x 10 12 x 10 LQ1T4A-R10 1/4" x 5/32" 1/2" x 3/8" 1/4" x 5/32" TIL
10 x 8
LQ1T41-R7 10 x 8 12 x 10 LQ1T4A-R17 1/4" x 5/32" 3/8" x 1/4" 1/2" x 3/8"
LQ1T41-R11
6x4
10 x 8 12 x 10 LQ1T4A-R20 3/8" x 1/4" 1/4" x 5/32" 1/2" x 3/8" TLM
4 LQ1T41-R12 12 x 10 12 x 10 LQ1T4A-R33 1/8" x 0.086" 1/2" x 3/8" 1/8" x 0.086" TILM
LQ1T41-R22 10 x 8 6x4 12 x 10 LQ1T5A-R2 3/4" x 5/8" 3/8" x 1/4" 3/4" x 5/8"
LQ1T41-R23 6x4 6x4 12 x 10 LQ1T5A-R5 1/2" x 3/8" 3/4" x 5/8" 3/4" x 5/8" TD
LQ1T41-R26 12 x 10 3x2 12 x 10 LQ1T5A-R6 3/8" x 1/4" 3/4" x 5/8" 3/4" x 5/8" TID
LQ1T41-R32 6x4 12 x 10 6x4 ∗ LQ1T5A-R7 1/2" x 3/8" 1/2" x 3/8" 3/4" x 5/8" TH
LQ1T41-R34 3x2 12 x 10 3x2 LQ1T5A-R8 3/8" x 1/4" 3/8" x 1/4" 3/4" x 5/8" TIH
LQ1T51-R2 10 x 8 19 x 16 ∗ LQ1T5A-R10 3/8" x 1/4" 3/8" x 1/4"
3/4" x 5/8"
LQ1T51-R3 19 x 16 8x6 19 x 16 LQ1T5A-R12 1/4" x 5/32" 3/4" x 5/8"
LQ1T51-R4 6x4 19 x 16 5 ∗ LQ1T5A-R17 1/2" x 3/8" 3/8" x 1/4" 3/4" x 5/8"
LQ1T51-R5 12 x 10 19 x 16 19 x 16 LQ1T5A-R21 3/8" x 1/4" 1/4" x 5/32" 3/4" x 5/8"
LQ1T51-R6 10 x 8 19 x 16 19 x 16 LQ1T5A-R22 1/2" x 3/8" 1/4" x 5/32" 3/4" x 5/8"
∗ LQ1T51-R7 12 x 10 12 x 10 19 x 16 LQ1T5A-R26 3/4" x 5/8" 1/8" x 0.086" 3/4" x 5/8"
∗ LQ1T51-R8 10 x 8 10 x 8 19 x 16 LQ1T5A-R31 3/8" x 1/4" 1/2" x 3/8"
3/4" x 5/8"
5 LQ1T51-R10 10 x 8 19 x 16 10 x 8 ∗ LQ1T5A-R32 1/4" x 5/32" 1/4" x 5/32"
LQ1T51-R12 8x6 19 x 16 19 x 16 LQ1T6A-R2 1" x 7/8" 1/2" x 3/8" 1" x 7/8"
LQ1T51-R13 6x4 19 x 16 19 x 16 LQ1T6A-R3 1" x 7/8" 3/8" x 1/4" 1" x 7/8"
∗ LQ1T51-R17 10 x 8 12 x 10 19 x 16 ∗ LQ1T6A-R4 1" x 7/8" 1/4" x 5/32" 1" x 7/8"
LQ1T51-R24 12 x 10 6x4 19 x 16 LQ1T6A-R5 3/4" x 5/8" 1" x 7/8"
1" x 7/8"
LQ1T51-R26 4x3 19 x 16 LQ1T6A-R6 1/2" x 3/8" 1" x 7/8"
19 x 16
LQ1T51-R28 3x2 19 x 16 LQ1T6A-R7 3/4" x 5/8" 3/4" x 5/8" 1" x 7/8"
LQ1T51-R31 10 x 8 19 x 16 12 x 10 ∗ LQ1T6A-R8 1/2" x 3/8" 1/2" x 3/8" 1" x 7/8"
LQ1T61-R2 12 x 10 25 x 22 LQ1T6A-R10 1/2" x 3/8" 1" x 7/8" 1/2" x 3/8"
LQ1T61-R3 25 x 22 10 x 8 25 x 22 6 LQ1T6A-R11 3/8" x 1/4" 3/4" x 5/8" 1" x 7/8"
∗ LQ1T61-R4 8x6 25 x 22 LQ1T6A-R12 3/8" x 1/4" 1" x 7/8"
1" x 7/8"
LQ1T61-R5 19 x 16 25 x 22 25 x 22 ∗ LQ1T6A-R13 1/4" x 5/32" 1" x 7/8"
LQ1T61-R6 12 x 10 25 x 22 25 x 22 LQ1T6A-R17 1/2" x 3/8" 1" x 7/8"
3/4" x 5/8"
LQ1T61-R7 19 x 16 19 x 16 25 x 22 ∗ LQ1T6A-R18 1/4" x 5/32" 1" x 7/8"
∗ LQ1T61-R8 12 x 10 12 x 10 25 x 22 LQ1T6A-R20 3/4" x 5/8" 1/2" x 3/8" 1" x 7/8"
LQ1T61-R10 25 x 22 12 x 10 LQ1T6A-R30 3/8" x 1/4" 3/4" x 5/8"
12 x 10
LQ1T61-R11 19 x 16 25 x 22 LQ1T6A-R31 1/2" x 3/8" 1" x 7/8" 3/4" x 5/8"
6
LQ1T61-R12 10 x 8 25 x 22 25 x 22 ∗ LQ1T6A-R33 1/4" x 5/32" 1/4" x 5/32"
∗ LQ1T61-R13 8x6 25 x 22 25 x 22 Note 1) Products marked “∗” are produced upon receipt of order.
LQ1T61-R15 6x4 25 x 22 25 x 22
LQ1T61-R18 10 x 8 19 x 16 25 x 22 (The body of the fitting is PTFE machined.)
LQ1T61-R19 6x4 19 x 16 25 x 22 Note 2) For details of the applicable tubing sizes, refer to page 945.
LQ1T61-R20 19 x 16 12 x 10 25 x 22
∗ LQ1T61-R26 25 x 22 6x4 25 x 22
LQ1T61-R30 10 x 8 25 x 22 19 x 16
LQ1T61-R31 12 x 10 25 x 22 19 x 16
∗ LQ1T61-R34 6x4 25 x 22 6x4
Note 1) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.)
Note 2) For details of the applicable tubing sizes, refer to page 945.
891
LQ1 Series

Dimensions
Union tee reducing: LQ1T-R

2
øM
1/4
1/8

H2

B side
2 x øB
(E2)
L2

3
øM
1 øM
F

SMC

1/4
1/8
1/4
1/8
1 25
A side C side
H1 (E1) G (E3) H3
L1 L3
Class 3 to 5 Class 6

Metric Size
A side B side C side Min.
Model B E1 E2 E3 F G H1 H2 H3 L1 L2 L3 M1 M2 M3
Applicable tubing O.D. port size
LQ1T31-R4 ø10 ø3 ø10 6 24 15 24 9 18 21 14 21 43 33 43 28 16.5 28 1.8
LQ1T31-R7 ø8 ø8 ø10 5.5
LQ1T31-R8 ø6 ø6 ø10 3.6
LQ1T32-R5 ø6 ø8 ø8 5 20 20 20 9 18 17 17 17 36.5 36.5 36.5 23 23 23 3.6
LQ1T32-R6 ø6 ø10 ø10 3.6
LQ1T32-R7 ø6 ø6 ø8 3.6
LQ1T41-R2 ø12 ø8 ø12 20 17 38.5 23 5.5
LQ1T41-R3 ø12 ø6 ø12 15 14 33 16.5 3.6
6 24 24 9 18 21 21 43 43 28 28
LQ1T41-R5 ø10 ø12 ø12 7.4
24 21 43
LQ1T41-R7 ø10 ø10 ø12 28 7.4
LQ1T41-R11 ø6 ø10 ø12 20 17 44 23 3.6
7 20 29 14 28 26 44 54 23 39
LQ1T41-R12 ø6 ø12 ø12 29 26 54 39 3.6
17
LQ1T41-R22 ø10 ø6 ø12 6 24 24 9 18 21 21 43 38.5 43 28 28 3.6
20 23
LQ1T41-R23 ø6 ø6 ø12 7 20 29 14 28 17 26 44 44 54 23 39 3.6
LQ1T41-R26 ø12 ø3 ø12 24 15 24 21 14 21 43 33 43 28 16.5 28 1.8
LQ1T41-R32 ø6 ø12 ø6 6 9 18 3.6
15 24 15 14 21 14 33 43 33 16.5 28 16.5
LQ1T41-R34 ø3 ø12 ø3 1.8
LQ1T51-R2 ø19 ø10 ø19 7.4
7 29 20 29 14 28 26 17 26 54 44 54 39 23 39
LQ1T51-R3 ø19 ø8 ø19 5.5

A 892
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

LVC
LVA
LVH
LVD
LVQ
LVP
LVW
LQ1
LQ3

Metric Size
LVN
Model
A side B side C side
B E1 E2 E3 F G H1 H2 H3 L1 L2 L3 M1 M2 M3
Min.
port size
LQHB
Applicable tubing O.D.
LQ1T51-R4 ø19 ø6 ø19 15 14 38.5 16.5 3.6 TL
29 26 54 39 TIL
LQ1T51-R5 ø12 ø19 ø19 7 29 14 28 26 54 39 9.4
29 26 54 39 TLM
LQ1T51-R6 ø10 ø19 ø19 20 17 44 23 7.4
∗ LQ1T51-R7 ø12 ø12 ø19 9.4 TILM
∗ LQ1T51-R8
— 24 24 39.5 — — 21 21 36 42 52.5 57.5 28 28 49 TD
ø10 ø10 ø19 7.4
LQ1T51-R10 ø10 ø19 ø10 20 29 24 17 26 21 49 28 7.4 TID
LQ1T51-R12 ø8 ø19 ø19 7 14 28 44 54 23 39 5.5 TH
20 29 29 17 26 26 54 39 TIH
LQ1T51-R13 ø6 ø19 ø19 3.6
∗ LQ1T51-R17 ø10 ø12 ø19 — 24 24 39.5 18 36 21 21 36 42 52.5 57.5 28 28 49 7.4
LQ1T51-R24 ø12 ø6 ø19 3.6
LQ1T51-R26 ø19 ø4 ø19 29 15 29 26 14 26 54 38.5 54 39 16.5 39 2.6
7 14 28
LQ1T51-R28 ø19 ø3 ø19 1.8
LQ1T51-R31 ø10 ø19 ø12 20 29 24 17 26 21 44 54 49 23 39 28 7.4
LQ1T61-R2 ø25 ø12 ø25 9.4
8 24 18 36 21 69.5 54.5 69.5 28
LQ1T61-R3 ø25 ø10 ø25 39.5 36 49 7.4
∗ LQ1T61-R4
39.5 36 49
ø25 ø8 ø25 — 20 — — 17 55 47.5 55 23 5.5
LQ1T61-R5 ø19 ø25 ø25 69.5 15
LQ1T61-R6 ø12 ø25 ø25 8 24 39.5 18 36 21 36 54.5 69.5 69.5 28 49 9.4
39.5 36 49
LQ1T61-R7 ø19 ø19 ø25 39.5 36 69.5 49 15
∗ LQ1T61-R8 ø12 ø12 ø19 — 24 24 — — 21 21 47 52.5 57.5 28 28 9.4
LQ1T61-R10 ø12 ø25 ø12 8 24 39.5 24 18 36 21 36 21 54.5 69.5 54.5 28 49 28 9.4
LQ1T61-R11 ø12 ø19 ø25 9.4
8 24 18 36 21 54.5 69.5 68.5 28
LQ1T61-R12 ø10 ø25 ø25 7.4
∗ LQ1T61-R13 ø8 ø25 ø25 — 20 39.5 39.5 — — 17 36 36 46.5 68 68 23 49 49 5.5
LQ1T61-R15 ø6 ø25 ø25 15 14 44 16.5 3.6
8 18 36 69.5 69.5
LQ1T61-R18 ø10 ø19 ø25 24 21 54.5 28 7.4
LQ1T61-R19 ø6 ø19 ø25 15 39.5 14 36 44 69.5 16.5 49 3.6
8 18 36 69.5
LQ1T61-R20 ø19 ø12 ø25 24 21 69.5 54.5 28 9.4
∗ LQ1T61-R26
39.5 36 49
ø25 ø6 ø25 — 20 39.5 — — 17 36 55 47.5 55 23 49 3.6
LQ1T61-R30 ø10 ø25 ø19 7.4
8 24 18 36 21 54.5 69.5 49.5 28
LQ1T61-R31 ø12 ø25 ø19 39.5 36 49 9.4
∗ LQ1T61-R34 ø6 ø25 ø6 — 20 20 — — 17 17 46.5 55 46.5 23 23 3.6
Note) Products marked “∗” are produced upon receipt of order. (The body of the fitting is PTFE machined.)

893 A
LQ1 Series

Dimensions
Union tee reducing: LQ1T-R

2
øM
1/4
1/8

H2

B side
2 x øB
(E2)
L2

3
øM
1 øM
F

SMC

1/4
1/8
1/4
1/8
1 25
A side C side
H1 (E1) G (E3) H3
L1 L3
Class 3 to 5 Class 6

Inch Size
A side B side C side Min.
Model B E1 E2 E3 F G H1 H2 H3 L1 L2 L3 M1 M2 M3
Applicable tubing O.D. port size
LQ1T3A-R5 1/4" 3/8" 3/8" 3.6
5 20 20 20 9 18 17 17 17 36.5 36.5 36.5 23 23 23
LQ1T3A-R7 1/4" 1/4" 3/8" 3.6
LQ1T4A-R2 1/2" 1/4" 1/2" 3.6
15 14 33 16.5
LQ1T4A-R4 1/2" 1/8" 1/2" 6 24 24 9 18 21 21 43 43 28 28 1.8
LQ1T4A-R5 3/8" 1/2" 1/2" 24 21 43 28 5.8
LQ1T4A-R6 1/4" 1/2" 1/2" 7 20 29 29 14 28 17 26 26 44 54 54 23 39 39 3.6
LQ1T4A-R7 3/8" 3/8" 1/2" 6 24 24 24 9 18 21 21 21 43 43 43 28 28 28 5.8
LQ1T4A-R8 1/4" 1/4" 1/2" 7 20 20 29 14 28 17 17 26 44 44 54 23 23 39 3.6
LQ1T4A-R10 1/4" 1/2" 1/4" 6 15 24 15 9 18 14 21 14 33 43 33 16.5 28 16.5 3.6
LQ1T4A-R17 1/4" 3/8" 1/2" 7 20 29 14 28 17 26 44 44 54 23 39 3.6
20 17 23
LQ1T4A-R20 3/8" 1/4" 1/2" 24 24 21 21 43 38.5 43 28 28 3.6
6 9 18
LQ1T4A-R33 1/8" 1/2" 1/8" 15 24 15 14 21 14 33 43 33 16.5 28 16.5 1.8
LQ1T5A-R2 3/4" 3/8" 3/4" 20 17 44 23 5.8
29 26 54 39
LQ1T5A-R5 1/2" 3/4" 3/4" 7 29 14 28 26 54 39 9
29 26 54 39
LQ1T5A-R6 3/8" 3/4" 3/4" 20 17 44 23 5.8
∗ LQ1T5A-R7 1/2" 1/2" 3/4" — 24 24 39.5 — — 21 21 36 42 52.5 57.5 28 28 49 9
LQ1T5A-R8 3/8" 3/8" 3/4" 7 20 20 29 14 28 17 17 26 44 44 54 23 23 39 5.8
Note) Products marked “∗” are produced upon receipt of order. (The body of the fitting is PTFE machined.)

A 894
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

LVC
LVA
LVH
LVD
LVQ
LVP
LVW
LQ1
LQ3

Inch Size
LVN
Model
A side B side C side
B E1 E2 E3 F G H1 H2 H3 L1 L2 L3 M1 M2 M3
Min.
port size
LQHB
Applicable tubing O.D.
∗ LQ1T5A-R10 3/8" 3/4" 3/8" — 20 39.5 20 — — 17 36 17 46.5 55 46.5 23 49 23 5.8 TL
LQ1T5A-R12 1/4" 3/4" 3/4" 7 15 29 29 14 28 14 26 26 38.5 54 54 16.5 39 39 3.6 TIL
∗ LQ1T5A-R17 1/2" 3/8" 3/4" — 24 24 39.5 — — 21 21 36 42 52.5 57.5 28 28 49 5.8 TLM
LQ1T5A-R21 3/8" 1/4" 3/4" 20 20 17 17 44 44 23 23 3.6 TILM
LQ1T5A-R22 1/2" 1/4" 3/4" 29 26 54 39 3.6 TD
7 29 15 14 28 26 14 54 38.5 39 16.5 TID
LQ1T5A-R26 3/4" 1/8" 3/4" 1.8
LQ1T5A-R31 3/8" 3/4" 1/2" 29 24 26 21 44 54 49 39 28 5.8 TH
∗ LQ1T5A-R32
20 17 23 TIH
1/4" 3/4" 1/4" — 39.5 20 — — 36 17 46.5 55 46.5 49 23 3.6
LQ1T6A-R2 1" 1/2" 1" 9
8 24 18 36 21 69.5 54.5 69.5 28
LQ1T6A-R3 1" 3/8" 1" 5.8
∗ LQ1T6A-R4
39.5 36 49
1" 1/4" 1" — 20 — — 17 55 47.5 55 23 3.6
LQ1T6A-R5 3/4" 1" 1" 39.5 36 69.5 49 15
LQ1T6A-R6 1/2" 1" 1" 8 24 39.5 18 36 21 36 54.5 69.5 69.5 28 49 9
LQ1T6A-R7 3/4" 3/4" 1" 39.5 36 69.5 49 15
∗ LQ1T6A-R8 1/2" 1/2" 1" — 24 24 — — 21 21 42 52.5 57.5 28 28 9
LQ1T6A-R10 1/2" 1" 1/2" 24 21 54.5 28 9
LQ1T6A-R11 3/8" 3/4" 1" 8 24 18 36 21 54.5 69.5 28 5.8
69.5
LQ1T6A-R12 3/8" 1" 1" 39.5 36 49 5.8
∗ LQ1T6A-R13
39.5 36 49
1/4" 1" 1" — 20 — — 17 46.5 68 68 23 3.6
LQ1T6A-R17 1/2" 3/4" 1" 8 24 18 36 21 54.5 69.5 69.5 28 9
∗ LQ1T6A-R18 1/4" 3/4" 1" — 20 39.5 — — 17 36 46.5 68 68 23 49 3.6
LQ1T6A-R20 3/4" 1/2" 1" 39.5 24 36 21 69.5 54.5 49 28 9
39.5 36 49
LQ1T6A-R30 3/8" 1" 3/4" 8 18 36 69.5 5.8
24 21 54.5 69.5 28
LQ1T6A-R31 1/2" 1" 3/4" 39.5 36 49 9
∗ LQ1T6A-R33 1/4" 1" 1/4" — 20 20 — — 17 17 46.5 55 46.5 23 23 3.6
Note) Products marked “∗” are produced upon receipt of order. (The body of the fitting is PTFE machined.)

895 A
LQ1 Series
Panel Mount Union Reducing
How to Order

Tubing
connection LQ1 P 2 1 R1
Fitting type Packaging
Symbol Type Symbol Packaging
P Panel mount union Nil Clean packaging equivalent to Class M3.5
1 Standard packaging equivalent to Class M5.5

Body size Piping type


(according to the combination table) (according to the combination table)
Symbol Type
Tubing type R Reducing
Symbol Type
1, 2 Metric
A, B Inch

Size combination (Metric) Size combination (Inch)


A side B side A side B side
Class Model Class Model
Applicable tubing size (mm) Applicable tubing size (inch)
4 ∗ LQ1P41-R3 12 x 10 6x4 4 ∗ LQ1P4A-R2 1/2" x 3/8" 1/4" x 5/32"
5 ∗ LQ1P51-R2 19 x 16 10 x 8 5 ∗ LQ1P5A-R2 3/4" x 5/8" 3/8" x 1/4"
Note 1) Products marked “∗” are produced upon receipt of Note 1) Products marked “∗” are produced upon receipt of
order. (The body of the fitting is PTFE machined.) order. (The body of the fitting is PTFE machined.)
Note 2) For details of the applicable tubing sizes, refer Note 2) For details of the applicable tubing sizes, refer
to page 945. to page 945.

Dimensions
Panel mount union
reducing: LQ1P-R Panel thickness (Max. t) J
W1
øM W2
1 2
øM

A side B side

H2
E1 E2
H1
L1
L2
Class 4 and 5
diameter øK
Panel hole

Metric Size
A side B side Min.
Model Applicable tubing E1 E2 H1 H2 J K L1 L2 M1 M2 port t W1 W2
O.D. size
∗ LQ1P41-R3 ø12 ø6 29 20 26 17 7 20.5 43.5 82.1 39 23 3.6 8 39 24
∗ LQ1P51-R2 ø19 ø10 29 20 26 17 7 20.5 43.5 82.1 39 23 7.4 8 39 24

Inch Size
A side B side Min.
Model Applicable tubing E1 E2 H1 H2 J K L1 L2 M1 M2 port t W1 W2
O.D. size
∗ LQ1P4A-R2 1/2" 1/4" 29 20 26 17 7 20.5 43.5 82.1 39 23 3.6 8 39 24
∗ LQ1P5A-R2 3/4" 3/8" 29 20 26 17 7 20.5 43.5 82.1 39 23 5.8 8 39 24
Note) Products marked “∗” are produced upon receipt of order. (The body of the fitting is PTFE machined.)
A 896
LQ1 Series
Union Reducing
How to Order

Tubing connection LQ1 U 2 1 R1


Fitting type Packaging
Symbol Type
LVC
Symbol Packaging
U Union Nil Clean packaging equivalent to Class M3.5
Body size
1 Standard packaging equivalent to Class M5.5
LVA
(according to the combination table)
Tubing type Piping type LVH
Symbol Type (according to the combination table)
1, 2 Metric Symbol Type LVD
A, B Inch R Reducing

Size combination (Metric) Size combination (Inch)


LVQ
A side B side A side B side
Class Model
Applicable tubing size (mm)
Class Model
Applicable tubing size (inch) LVP
LQ1U31-R3 10 x 8
4x3 LQ1U4A-R2 1/4" x 5/32"
3 LQ1U31-R4
LQ1U41-R2
3x2
8x6
4 LQ1U4A-R3 1/2" x 3/8"
LQ1U4A-R4
3/16" x 0.127"
1/8" x 0.086"
LVW
LQ1U41-R3 12 x 10
6x4 ∗ LQ1U5A-R2 3/8" x 1/4"
4 LQ1U41-R4 4x3
5
LQ1U5A-R3 3/4" x 5/8" 1/4" x 5/32" LQ1
LQ1U41-R5 3x2 LQ1U5A-R4 3/16" x 0.127"
∗ LQ1U51-R2 10 x 8 LQ1U5A-R5 1/8" x 0.086"
∗ LQ1U51-R3 8x6 LQ1U6A-R2 1/2" x 3/8" LQ3
5 LQ1U51-R4 19 x 16 6x4 6 LQ1U6A-R3 1" x 7/8" 3/8" x 1/4"
LQ1U51-R5 4x3 ∗ LQ1U6A-R4 1/4" x 5/32"
LVN
LQ1U51-R6 3x2 Note 1) Products marked “∗” are produced upon receipt of
LQ1U61-R2 12 x 10
order. (The body of the fitting is PTFE machined.)
6 LQ1U61-R3 25 x 22 10 x 8
Note 2) For details of the applicable tubing sizes, refer to
LQHB
∗ LQ1U61-R5 6x4
page 945. TL
Note 1) Products marked “∗” are produced upon receipt of
order. (The body of the fitting is PTFE machined.) TIL
Note 2) For details of the applicable tubing sizes, TLM
refer to page 945. TILM
TD
Dimensions TID
TH
Union reducing: LQ1U-R TIH
W
1 øM
øM 2

A side B side 6 4
12 10
H2 1 25
H1 (E1) (E2) Class 3 to 5
L
Class 6
Metric Size Inch Size
A side B side Min. A side B side Min.
Model Applicable tubing E1 E2 H1 H2 L M1 M2 port W Model Applicable tubing E1 E2 H1 H2 L M1 M2 port W
O.D. size O.D. size
LQ1U31-R3 ø10 ø4 2.6 LQ1U4A-R2 1/2" 1/4" 3.6
24 15 21 14 53 28 16.5 23
LQ1U31-R4 ø10 ø3 1.8 LQ1U4A-R3 1/2" 3/16" 24 15 21 14 53 28 16.5 2.9 23
LQ1U41-R2 ø12 ø8 20 17 58.5 23 5.5 LQ1U4A-R4 1/2" 1/8" 1.8
LQ1U41-R3 ø12 ø6 3.6 ∗ LQ1U5A-R2 3/4" 3/8" 20 17 66.5 23 5.8
24 21 28 23
LQ1U41-R4 ø12 ø4 15 14 53 16.5 2.6 LQ1U5A-R3 3/4" 1/4" 3.6
29 26 39 32
LQ1U41-R5 ø12 ø3 1.8 LQ1U5A-R4 3/4" 3/16" 15 14 61.5 16.5 2.9
∗ LQ1U51-R2 ø19 ø10 7.4 LQ1U5A-R5 3/4" 1/8" 1.8
20 17 66.5 23
∗ LQ1U51-R3 ø19 ø8 5.5 LQ1U6A-R2 1" 1/2" 28 9
24 21 87 46
LQ1U51-R4 ø19 ø6 29 26 39 3.6 32 LQ1U6A-R3 1" 3/8" 39.5 36 49 5.8
LQ1U51-R5 ø19 ø4 15 14 61.5 16.5 2.6 ∗ LQ1U6A-R4 1" 1/4" 20 17 82 23 3.6 36
LQ1U51-R6 ø19 ø3 1.8 Note) Products marked “∗” are produced upon receipt of order.
LQ1U61-R2 ø25 ø12 9.4 (The body of the fitting is PTFE machined.)
24 21 87 28 46
LQ1U61-R3 ø25 ø10 39.5 36 49 7.4
∗ LQ1U61-R5 ø25 ø6 20 17 82 23 3.6 36
Note) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.)

897 A
LQ1 Series
Space Saving Union Elbow
How to Order

Tubing
connection
LQ1 E 21 SS
Fitting type Packaging
Symbol Type Symbol Packaging
E Union elbow Nil Clean packaging equivalent to Class M3.5
1 Standard packaging equivalent to Class M5.5

Piping type
Symbol Type
SS Space saving

Size combination
Symbol Applicable tubing Symbol Applicable tubing
Model Model
Class No. size (mm) Class No. size (inch)
2 1 LQ1E21-SS 6x4 2 A LQ1E2A-SS 1/4" x 5/32"
3 1 LQ1E31-SS 10 x 8 3 A LQ1E3A-SS 3/8" x 1/4"
3 2 LQ1E32-SS 8x6 4 A LQ1E4A-SS 1/2" x 3/8"
4 1 LQ1E41-SS 12 x 10 5 A ∗ LQ1E5A-SS 3/4" x 5/8"
5 1 ∗ LQ1E51-SS 19 x 16 6 A LQ1E6A-SS 1" x 7/8"
6 1 LQ1E61-SS 25 x 22 Note 1) Products marked “∗” are produced upon
Note 1) Products marked “∗” are produced upon receipt of order. (The body of the fitting
receipt of order. (The body of the fitting is PTFE machined.)
is PTFE machined.) Note 2) For details of the applicable tubing
Note 2) For details of the applicable tubing sizes, refer to page 945.
sizes, refer to page 945.

Dimensions
Space saving union elbow: LQ1E-SS

B side

øB
(L2)

øM
C

A side
SMC

6
1 25
C (E) H
L1
Class 2 to 5 Class 6

Metric Size Inch Size


A side B side Min. A side B side Min.
Model Applicable Applicable B C E H L1 L2 M port Model Applicable Applicable B C E H L1 L2 M port
tubing O.D. body size size tubing O.D. body size size
LQ1E21-SS ø6 2 4 6 15 14 28
31.1 16.5 3.6 LQ1E2A-SS 1/4" 2 4 6 15 14 28 31.1 16.5 3.6
LQ1E31-SS ø10 3 7.4 LQ1E3A-SS 3/8" 3 5 9 20 17 36.6 41.1 23 5.8
5 9 20 17 36.6 41.1 23
LQ1E32-SS ø8 3 5.5 LQ1E4A-SS 1/2" 4 6 9 24 21 43 47.5 28 9
LQ1E41-SS ø12 4 6 9 24 21 43 47.5 28 9.4 ∗ LQ1E5A-SS 3/4" 5 — — 29 26 45.5 59 39 15
∗ LQ1E51-SS ø19 5 — — 29 26 45.5 59 39 15 LQ1E6A-SS 1" 6 8 18 39.5 36 69.5 75.5 49 21.2
LQ1E61-SS ø25 6 8 18 39.5 36 69.5 75.5 49 21.2 Note) Products marked “∗” are produced upon receipt of order.
Note) Products marked “∗” are produced upon receipt of order. (The body of the fitting is PTFE machined.)
(The body of the fitting is PTFE machined.)
A 898
LQ1 Series
Space Saving
Union Elbow Reducing
How to Order

Tubing
connection
LQ1 E 2 1 SS R9 LVC
Packaging
Fitting type
Symbol Packaging LVA
Symbol Type Nil Clean packaging equivalent to Class M3.5
E Union elbow 1 Standard packaging equivalent to Class M5.5 LVH
Body size
(according to the combination table)
Piping type LVD
Symbol Type
Tubing type R Reducing LVQ
Symbol Type
Piping type (according to the combination table)
1, 2 Metric LVP
Symbol Type
A Inch
SS Space saving
LVW
Size combination (Metric) Size combination (Inch)
A side B side A side B side LQ1
Class Model Applicable tubing Applicable Class Model Applicable tubing Applicable
size (mm) body size size (inch) body size
∗ LQ1E21-SS-R9 3 ∗ LQ1E2A-SS-R8 3
LQ3
2 6x4 2 1/4" x 5/32"
∗ LQ1E21-SS-R10 4 ∗ LQ1E2A-SS-R9 4
∗ LQ1E31-SS-R2 2 ∗ LQ1E3A-SS-R1 2 LVN
10 x 8 3 3/8" x 1/4"
∗ LQ1E31-SS-R8 4 ∗ LQ1E3A-SS-R8 4
3
∗ LQ1E32-SS-R1
8x6
2 ∗ LQ1E4A-SS-R1 3 LQHB
LQ1E32-SS-R8 3 4 LQ1E4A-SS-R2 1/2" x 3/8" 2
∗ LQ1E41-SS-R1 3 ∗ LQ1E4A-SS-R8 5 TL
4 LQ1E41-SS-R3 12 x 10 2 6 LQ1E6A-SS-R1 1" x 7/8" 5 TIL
∗ LQ1E41-SS-R8 5 Note 1) Products marked “∗” are produced upon receipt of order. TLM
6 LQ1E61-SS-R1 25 x 22 5 (The body of the fitting is PTFE machined.) TILM
Note 1) Products marked “∗” are produced upon receipt of order. Note 2) For details of the applicable tubing sizes, refer to page 945. TD
(The body of the fitting is PTFE machined.) TID
Note 2) For details of the applicable tubing sizes, refer to page 945.
TH
Dimensions TIH

Space saving union elbow B side øM2

reducing: LQ1E-SS-R
øB
(L2)

H2

øM 1
C

A side
SMC

C (E) H1 1 25
L1

Class 2 to 5 Class 6
Metric Size Inch Size
A side B side Min. A side B side Min.
Model Applicable Applicable B C E H1 H2 L1 L2 M1 M2 port Model Applicable Applicable B C E H1 H2 L1 L2 M1 M2 port
tubing body size tubing
O.D. size O.D. body size size
∗ LQ1E21-SS-R9 3 17 23.5 35.8 23 ∗ LQ1E2A-SS-R8 3 17 23.5 35.8 23
∗ LQ1E21-SS-R10 ø6 4
— — 15 14
21 25 40.8
16.5
28
3.6
∗ LQ1E2A-SS-R9 1/4"
4
— — 15 14
21 25 40.8
16.5
28
3.6
∗ LQ1E31-SS-R2 2 14 27.2 32.1 16.5 3.6 ∗ LQ1E3A-SS-R1 2 14 27.2 32.1 16.5 3.6
∗ LQ1E31-SS-R8 ø 10 3/8" — — 20 17 23
4 — — 21 30.4 44 28 7.4 ∗ LQ1E3A-SS-R8 4 21 30.4 44 28 5.8
∗ LQ1E32-SS-R1 20 17 23
2 14 27.2 32.1 16.5 3.6 ∗ LQ1E4A-SS-R1 3 17 34.8 41.5 23 5.8
ø8
LQ1E32-SS-R8 3 5 9 17 36.6 41.1 23 5.5 LQ1E4A-SS-R2 1/2" 2 — — 24 21 14 43 35.6 28 16.5 3.6
∗ LQ1E41-SS-R1 3 — — 17 34.8 41.5 23 5.8 ∗ LQ1E4A-SS-R8 5 26 39.6 49 39 9
LQ1E41-SS-R3 ø12 2 6 9 24 21 14 43 35.6 28 16.5 3.6 LQ1E6A-SS-R1 1" 5 8 18 39.5 36 26 69.5 64.5 49 39 15
∗ LQ1E41-SS-R8 5 — — 26 39.6 49 39 9.4 Note) Products marked “∗” are produced upon receipt of order.
LQ1E61-SS-R1 ø25 5 8 18 39.5 36 26 69.5 64.5 49 39 15 (The body of the fitting is PTFE machined.)
Note) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.)
899 A
LQ1 Series
Space Saving Union Tee
How to Order

Tubing
connection
LQ1 T 21 S T1
Fitting type Packaging
Symbol Type Symbol Packaging
T Union tee Nil Clean packaging equivalent to Class M3.5
Size combination 1 Standard packaging equivalent to Class M5.5
Symbol Applicable tubing Symbol Applicable tubing
Class No. size (mm) Class No. size (inch) Fitting type
2 1 6x4 2 A 1/4" x 5/32" Piping type Symbol Type
3 1 10 x 8 3 A 3/8" x 1/4" T1 Type 1
Symbol Type
3 2 8x6 4 A 1/2" x 3/8"
4 1 12 x 10 5 A 3/4" x 5/8" S Space saving T2 Type 2
5 1 19 x 16 6 A 1" x 7/8" T3 Type 3
6 1 25 x 22 Note) For details of the applicable T4 Type 4
Note) For details of the applicable tubing sizes, refer to page 945.
tubing sizes, refer to page 945.

Dimensions
Space saving union tee: LQ1T-ST Metric Size
Model Applicable tubing B E F G H L1 L2 M portMinsi.ze
L1 O.D.
LQ1T21-ST1
2 x øB
LQ1T21-ST2
ø6 4 15 6 12 14 28 31.1 16.5 3.6
LQ1T21-ST3
(L2)

LQ1T21-ST4
øM
LQ1T31-ST1
F

LQ1T31-ST2
1/4
ø10 5 20 9 18 17 36.5 41.1 23 5.8
(E) G (E) H LQ1T31-ST3
LQ1T31-ST4
Type T1 Class 2 to 5 LQ1T32-ST1
LQ1T32-ST2
ø8 5 20 9 18 17 36.5 41.1 23 5.5
LQ1T32-ST3
LQ1T32-ST4
LQ1T41-ST1
2 x øB
(E)

LQ1T41-ST2
ø12 6 24 9 18 21 43 47.5 28 9
L1

øM
LQ1T41-ST3
LQ1T41-ST4
F

1/4 LQ1T51-ST1
G (E) H LQ1T51-ST2
ø19 7 29 14 28 26 54 59 39 15
(L2) LQ1T51-ST3
LQ1T51-ST4
Type T2 Class 2 to 5 LQ1T61-ST1
LQ1T61-ST2
ø25 8 39.5 18 36 36 69.5 75.5 49 21.2
(L2) (L2) LQ1T61-ST3
LQ1T61-ST4
2 x øB

Inch Size
(E)

Applicable tubing B E M portMinsi.ze


L1

øM
Model O.D. F G H L1 L2
F

LQ1T2A-ST1
1/4
LQ1T2A-ST2
G H 1/4" 4 15 6 12 14 28 31.1 16.5 3.6
LQ1T2A-ST3
LQ1T2A-ST4
Type T3 Class 2 to 5 LQ1T3A-ST1
(L2) L1 LQ1T3A-ST2
3/8" 5 20 9 18 17 36.5 41.1 23 5.8
LQ1T3A-ST3
2 x øB
LQ1T3A-ST4
LQ1T4A-ST1
øM
(L2)

LQ1T4A-ST2
H

øM 1/2" 6 24 9 18 21 43 47.5 28 9
LQ1T4A-ST3
F

1/4 LQ1T4A-ST4
G (E) H LQ1T5A-ST1
1 25
LQ1T5A-ST2
3/4" 7 29 14 28 26 54 59 39 15
Type T4 Class 2 to 5 LQ1T5A-ST3
Class 6 LQ1T5A-ST4
LQ1T6A-ST1
LQ1T6A-ST2
1" 8 39.5 18 36 36 69.5 75.5 49 21.2
LQ1T6A-ST3
LQ1T6A-ST4
A 900
LQ1 Series
Space Saving
Union Tee Reducing
How to Order

Tubing
connection
LQ1 T 2 1 S T1 R39
LVC
Fitting type Packaging LVA
Symbol Type Symbol Packaging
T Union tee Nil Clean packaging equivalent to Class M3.5 LVH
1 Standard packaging equivalent to Class M5.5

Body size LVD


(according to the combination table) Piping type
Symbol Type LVQ
Tubing type
R Reducing
Symbol Type LVP
1, 2 Metric
A Inch Fitting type LVW
Symbol Type

Piping type
T1 Type 1 LQ1
T2 Type 2
Symbol Type
T3 Type 3 LQ3
S Space saving
T4 Type 4
LVN
LQHB
Size combination (Metric) Size combination (Inch)
A side (Left) B side (Center) C side (Right) A side (Left) B side (Center) C side (Right) TL
TIL
Class

Class

Model Applicable tubing size (O.D. x I.D.) / Model Applicable tubing size (O.D. x I.D.) /
Applicable body size Applicable body size TLM
TILM
LQ1T21-ST1-R39 6x4 Body size 3 3 LQ1T3A-ST2-R5 Body size 3 3/8" x 1/4" 1/4" x 5/32"
2 6x4 TD
LQ1T21-ST2-R41 Body size 3 6x4 ∗ LQ1T4A-ST1-R1 1/2" x 3/8"
Body size 3 TID
LQ1T32-ST1-R37 8x6 Body size 3 4 ∗ LQ1T4A-ST1-R7 3/8" x 1/4" 1/2" x 3/8"
3 8x6 TH
LQ1T32-ST2-R40 Body size 3 8x6 ∗ LQ1T4A-ST1-R37 1/2" x 3/8" Body size 5
TIH
∗ LQ1T41-ST1-R1 Body size 3 ∗ LQ1T5A-ST1-R1 Body size 4
4 12 x 10 12 x 10 3/4" x 5/8"
∗ LQ1T41-ST1-R37 Body size 5 ∗ LQ1T5A-ST1-R2 Body size 3
∗ LQ1T51-ST1-R1 Body size 4 LQ1T5A-ST1-R5 Body size 5
19 x 16 1/2" x 3/8"
∗ LQ1T51-ST1-R2 Body size 3 LQ1T5A-ST1-R7 Body size 4 3/4" x 5/8"
5
LQ1T51-ST1-R5 12 x 10 19 x 16 ∗ LQ1T5A-ST1-R12 1/4" x 5/32" Body size 5
Body size 5
5 ∗ LQ1T51-ST1-R13 6x4 ∗ LQ1T5A-ST2-R1 Body size 4 3/4" x 5/8"
∗ LQ1T51-ST1-R36 12 x 10 LQ1T5A-ST2-R3 Body size 5 1/4" x 5/32"
Body size 6
∗ LQ1T51-ST1-R37 19 x 16 12 x 10 ∗ LQ1T5A-ST3-R5 Body size 4 3/4" x 5/8" Body size 4
LQ1T51-ST2-R4 Body size 5 6x4 19 x 16 ∗ LQ1T6A-ST1-R1 Body size 5
∗ LQ1T61-ST1-R1 Body size 5 ∗ LQ1T6A-ST1-R2 1" x 7/8" Body size 4
25 x 22 1" x 7/8"
6 ∗ LQ1T61-ST1-R2 Body size 4 25 x 22 6 ∗ LQ1T6A-ST1-R3 Body size 3
LQ1T61-ST2-R1 Body size 6 19 x 16 LQ1T6A-ST2-R1
Body size 6 3/4" x 5/8"
Note 1) Products marked “∗” are produced upon receipt of order. LQ1T6A-ST2-R2 3/4" x 5/8"
(The body of the fitting is PTFE machined.) Note 1) Products marked “∗” are produced upon receipt of order.
Note 2) For details of the applicable tubing sizes, refer to page 945. (The body of the fitting is PTFE machined.)
Note 2) For details of the applicable tubing sizes, refer to page 945.

901
LQ1 Series

Dimensions
Space saving union tee reducing: LQ1T-S-R
B side B side øM2
øM2

H2
2 x øB

øM1
(E2)
H2 2 x øB
(L2)

L2
øM øM øM
1 3 3
F

F
A side C side A side C side
1/4 1/4 1/4

(E1) (E3) (E3)

H1
H1 G H3 G H3
L1 L3 (L1) L3
Type T1 Class 2 to 5 Type T2 Class 2 to 5

B side øM2 B side øM2

H2
(E2)

øM1

2 x øB 2 x øB

øM1
(L2) H2
L2

3
øM F øM
3
F

A side C side A side C side


1/4
H3
H1

G H1 G (E3) H3 1 25

(L1) (L3) (L1) L3


Type T3 Class 2 to 5 Type T4 Class 2 to 5 Class 6

Metric Size
A side (Left) B side (Center) C side (Right)
Model B E1 E2 E3 F G H1 H2 H3 L1 L2 L3 M1 M2 M3 portMin.size
Applicable tubing O.D.
LQ1T21-ST1-R39 ø6 Body size 3 ø6 20 — 36.5
41.1
5 20 9 18 17 17 17 36.5 23 23 23 3.6
LQ1T21-ST2-R41 Body size 3 ø6 ø6 — 20 41.1
36.5
LQ1T32-ST1-R37 ø8 Body size 3 ø8 20 — 36.5
41.1
5 20 9 18 17 17 17 36.5 23 23 23 5.5
LQ1T32-ST2-R40 Body size 3 ø8 ø8 — 20 41.1
36.5
∗ LQ1T41-ST1-R1 ø12 Body size 3 ø12 — 24 — 24 — — 21 17 21 34
41.5 34 28 23 28 5.8
∗ LQ1T41-ST1-R37 ø12 Body size 5 ø12 — 24 — 24 — — 21 26 21 39.5
52.5 39.5 28 39 28 9.4
∗ LQ1T51-ST1-R1 ø19 Body size 4 ø19 21 5341.9 41.9 28 9
∗ LQ1T51-ST1-R2 — — —
ø19 Body size 3 ø19 29 — 29 26 17 26 4841 41 39 23 39 5.8
LQ1T51-ST1-R5 ø12 Body size 5 ø19 7 14 28 26 5954 54 39 9.4
∗ LQ1T51-ST1-R13 ø6 Body size 5 ø19 — 15 — 29 — — 14 26 26 5329 49 16.5 39 39 3.6
∗ LQ1T51-ST1-R36 ø12 Body size 6 ø19 24 39.5 — — 36 36 7142.7 58.2 49 49
∗ LQ1T51-ST1-R37 — — 36 49 9.4
ø19 Body size 6 ø12 39.5 — — 14 26 7158.2 42.7 16.5 39
24
LQ1T51-ST2-R4 Body size 5 ø6 ø19 7 — 15 14 28 26 14 26 5454 54 39 16.5 39 3.6
∗ LQ1T61-ST1-R1 ø25 Body size 5 ø25 26 63.5 39 15
∗ LQ1T61-ST1-R2 — 39.5 — — — 58.2 58.2
ø25 Body size 4 ø25 39.5 36 21 36 57 49 28 49 9
LQ1T61-ST2-R1 Body size 6 ø19 ø25 8 — 39.5 18 36 36 72 69.5 69.5 49 15
Inch Size
A side (Left) B side (Center) C side (Right)
Model B E1 E2 E3 F G H1 H2 H3 L1 L2 L3 M1 M2 M3 portMin.size
Applicable tubing O.D.
LQ1T3A-ST2-R5 Body size 3 3/8 1/4 5
— 15 20 9 18 17 14 17 37.6 31.6 36.5 23 16.5 23 3.6
∗ LQ1T4A-ST1-R1 1/2 Body size 3 1/2 24 21 34 41.5 34 28
∗ LQ1T4A-ST1-R7 17 23 5.8
3/8 Body size 3 1/2 — 20 — 24 — — 17 21 38.5 41.5 34 23 28
∗ LQ1T4A-ST1-R37 1/2 Body size 5 1/2 24 21 26 39.5 52.5 39.5 28 39 9
∗ LQ1T5A-ST1-R1 3/4 Body size 4 3/4 21 41.9 53 41.9 28 9
∗ LQ1T5A-ST1-R2 — 29 — — 39
3/4 Body size 3 3/4 — 26 17 41 48 41 23 5.8
LQ1T5A-ST1-R5 1/2 Body size 5 3/4 15 29 26 38.5 55.5 16.5 39
7 14 28 54 9
LQ1T5A-ST1-R7 1/2 Body size 4 3/4 — 21 21 26 54 55.5 28 28 39
∗ LQ1T5A-ST1-R12 29
1/4 Body size 5 3/4 — 14 29 53 49 16.5 3.6
∗ LQ1T5A-ST2-R1 Body size 4 — — — 26
3/4 3/4 29 — 21 50.5 51.5 52.5 28 39 9
LQ1T5A-ST2-R3 Body size 5 1/4 3/4 7 — 15 29 14 28 26 14 59 38 54 39 16.5 3.6
∗ LQ1T5A-ST3-R5 Body size 4 3/4 Body size 4 — 29 — — — 21 26 21 50.5 44.5 50.5 28 39 28 9
∗ LQ1T6A-ST1-R1 1 Body size 5 1 26 63.5 39 15
∗ LQ1T6A-ST1-R2 1 Body size 4 1 — 39.5 — — — 21 58.2 57 58.2 28 9
∗ LQ1T6A-ST1-R3 1 Body size 3 1 39.5 36 17 36 52 49 23 49 5.8
LQ1T6A-ST2-R1 Body size 6 3/4 1
8 — 39.5 18 36 36 75.5 69.5 69.5 49 15
LQ1T6A-ST2-R2 Body size 6 3/4 3/4
Note) Products marked “∗” are produced upon receipt of order. (The body of the fitting is PTFE machined.)
A 902
LQ1 Series
Tubing Extension Union Elbow
How to Order

Tubing
connection
LQ1 E 21 T LVC
LVA
Fitting type Packaging
Symbol Type Symbol Packaging LVH
E Union elbow Nil Clean packaging equivalent to Class M3.5
1 Standard packaging equivalent to Class M5.5 LVD
LVQ
Piping type
Symbol Type LVP
T Tubing extension
LVW
Size combination
Symbol Applicable tubing size Symbol Applicable tubing size LQ1
Class No. (mm) Class No. (inch)
2 1 6x4 2 A 1/4" x 5/32" LQ3
3 1 10 x 8 3 A 3/8" x 1/4"
3 2 8x6 4 A 1/2" x 3/8" LVN
4 1 12 x 10 5 A 3/4" x 5/8"
5 1 19 x 16 6 A 1" x 7/8" LQHB
6 1 25 x 22 Note) For details of the applicable TL
Note) For details of the applicable tubing sizes, refer to page 945. TIL
tubing sizes, refer to page 945. TLM
TILM
Dimensions TD
TID
Tubing extension union elbow: LQ1E-T TH
TIH
B side
D

øM
H

øB
L3
L2

øM
C

A side
SMC

6
1 25
C (E) H
L1
Class 2 to 5 Class 6

Metric Size Inch Size


A side B side Min. A side B side Min.
Model Applicable Tubing size B C E H L1 L2 L3 M port Model Applicable Tubing size B C E H L1 L2 L3 M port
tubing O.D. (D) size tubing O.D. (D) size
LQ1E21-T ø6 6x4 4 6 1514 28 25.5 15 16.5 3.6 LQ1E2A-T 1/4" 1/4" x 5/32" 4 6 15 14 28 25.5 15 16.5 3.6
LQ1E31-T ø10 10 x 8 7.4 LQ1E3A-T 3/8" 3/8" x 1/4" 5 9 20 17 36.6 33.6 20 23 5.8
5 9 2017 36.6 33.6 20 23
LQ1E32-T ø8 8x6 5.5 LQ1E4A-T 1/2" 1/2" x 3/8" 6 9 24 21 43 40 25 28 9
LQ1E41-T ø12 12 x 10 6 9 24 21 43 39 24 28 9.4 ∗ LQ1E5A-T 3/4" 3/4" x 5/8" — — 29 26 45.5 55.5 35 39 15
∗ LQ1E51-T ø19 19 x 16 — — 29 26 45.5 55.5 35 39 15 LQ1E6A-T 1" 1" x 7/8" 8 18 39.5 36 69.5 72 46 49 21.2
LQ1E61-T ø25 25 x 22 8 18 39.5 36 69.5 72 46 49 21.2 Note) Products marked “∗” are produced upon receipt of order.
Note) Products marked “∗” are produced upon receipt of order. (The body of the fitting is PTFE machined.)
(The body of the fitting is PTFE machined.)

903 A
LQ1 Series
Tubing Extension Union Tee
How to Order

Tubing
connection
LQ1 T 21 T T1
Fitting type Packaging
Symbol Type Symbol Packaging
T Union tee Nil Clean packaging equivalent to Class M3.5
1 Standard packaging equivalent to Class M5.5
Size combination
Symbol Applicable tubing size Symbol Applicable tubing size Fitting type
Class No. (mm) Class No. (inch) Symbol Type
Piping type
2 1 6x4 2 A 1/4" x 5/32" T1 Type 1
3 1 10 x 8 3 A 3/8" x 1/4" Symbol Type
T2 Type 2
3 2 8x6 4 A 1/2" x 3/8" T Tubing extension
T3 Type 3
4 1 12 x 10 5 A 3/4" x 5/8" T4 Type 4
5 1 19 x 16 6 A 1" x 7/8"
6 1 25 x 22 Note) For details of the applicable
Note) For details of the applicable tubing sizes, refer to page 945.
tubing sizes, refer to page 945.

Dimensions
Tubing extension union tee: LQ1T-TT Metric Size
Applicable Min.
Model tubing B D E F G H L1 L2 L3 M port
D O.D. size
∗ LQ1T21-TT1 21.5
L1
∗ LQ1T21-TT2 ø6 — 6x4 15 — — 14
25.5
26.5 18 16.5 3.6
2 x øB ∗ LQ1T31-TT1 30.6
∗ LQ1T31-TT2 ø10 — 10 x 8 20 — — 17 35.5 24 23 7.4
L3

34.5
L2

∗ LQ1T32-TT1 29.6
øM
∗ LQ1T32-TT2 ø8 — 8x6 20 — — 17 34.5 35.5 24 23 5.5
F

1/4 ∗ LQ1T32-TT3 29
(E) G (E) H ∗ LQ1T41-TT1 36 42
∗ LQ1T41-TT2 ø12 — 10 x 8 24 — — 21 41.5 41 28 28 9.4
Type T1 Class 2 to 5 ∗ LQ1T41-TT3 36 42
LQ1T51-TT1
LQ1T51-TT2
2 x øB ø19 7 19 x 16 29 14 28 26 54 55.5 35 39 15
(E)

LQ1T51-TT3
L1

øM LQ1T51-TT4
LQ1T61-TT1
D

1/4 LQ1T61-TT2
F

(E) ø25 8 25 x 22 39.5 18 36 36 69.5 65.5 39.5 49 21.2


L3 G H LQ1T61-TT3
L2 LQ1T61-TT4
Type T2 Class 2 to 5 Inch Size
Applicable Min.
L2 L2 H Model tubing B D E F G H L1 L2 L3 M port
O.D. size
2 x øB
LQ1T2A-TT1
LQ1T2A-TT2
øM 1/4" 4 1/4" x 5/32" 15 6 12 14 28 28.5 18 16.5 3.6
(E)

LQ1T2A-TT3
L1

LQ1T2A-TT4
F

LQ1T3A-TT1
LQ1T3A-TT2
D

L3 G L3 3/8" 5 3/8" x 1/4" 20 9 18 17 36.5 37.6 24 23 5.8


LQ1T3A-TT3
Type T3 Class 2 to 5 LQ1T3A-TT4
LQ1T4A-TT1
D LQ1T4A-TT2
L2 L1 1/2" 6 1/2" x 3/8" 24 9 18 21 43 43 28 28 9
LQ1T4A-TT3
2 x øB LQ1T4A-TT4
øM
LQ1T5A-TT1
H
L3

LQ1T5A-TT2
L2

øM 3/4" 7 3/4" x 5/8" 29 14 28 26 54 55.5 35 39 15


LQ1T5A-TT3
F

1/4 1 25 LQ1T5A-TT4
L3 G (E) H LQ1T6A-TT1
LQ1T6A-TT2
1" 8 1" x 7/8" 39.5 18 36 36 69.5 65.5 39.5 49 21.2
Type T4 Class 2 to 5 Class 6 LQ1T6A-TT3
LQ1T6A-TT4
Note) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.)
A 904
LQ1 Series
Tubing Extension
Union Elbow Reducing
How to Order
Tubing
Size combination (Metric)
connection LQ1 E 2 1 T R8
A side B side Fitting type LVC
Symbol Type Piping type
Class Model Applicable tubing Tubing size
Symbol Type
size (mm) (mm) E Union elbow
R Reducing LVA
LQ1E21-T-R8 8x6 Body size
LQ1E21-T-R9 6x4 10 x 8 Piping type
LQ1E21-T-R10 12 x 10
(according to the combination table) LVH
Tubing type Symbol Type
2 LQ1E22-T-R8 6x4
T Tubing extension
LQ1E22-T-R9
4x3
8x6 Symbol Type LVD
LQ1E22-T-R10 10 x 8 1, 2 Metric Packaging
LQ1E22-T-R11 12 x 10 A Inch
LQ1E31-T-R1 8x6
Symbol Packaging LVQ
Size combination (Inch) Clean packaging
LQ1E31-T-R2 6x4
10 x 8 Nil equivalent to
LQ1E31-T-R8 12 x 10 A side B side Class M3.5 LVP
∗ LQ1E31-T-R9 19 x 16 Class Model Applicable tubing Tubing size
3 size (inch) (inch) Standard packaging
LQ1E32-T-R1 6x4
LQ1E32-T-R8 10 x 8 ∗ LQ1E2A-T-R8 3/8" x 1/4"
1 equivalent to LVW
8x6 2 1/4" x 5/32" Class M5.5
LQ1E32-T-R9 12 x 10 ∗ LQ1E2A-T-R9 1/2" x 3/8"
∗ LQ1E32-T-R10 19 x 16 ∗ LQ1E3A-T-R1 1/4" x 5/32" LQ1
LQ1E41-T-R1 10 x 8 3 ∗ LQ1E3A-T-R8 3/8" x 1/4" 1/2" x 3/8"
∗ LQ1E3A-T-R9
4
LQ1E41-T-R2
LQ1E41-T-R3 12 x 10
8x6
6x4 ∗ LQ1E4A-T-R1
3/4" x 5/8"
3/8" x 1/2"
LQ3
∗ LQ1E41-T-R8 19 x 16 4 ∗ LQ1E4A-T-R8 1/2" x 3/8" 3/4" x 5/8"
∗ LQ1E41-T-R9 25 x 22 ∗ LQ1E4A-T-R9 1" x 7/8" LVN
5 ∗ LQ1E51-T-R8 19 x 16 25 x 22 5 ∗ LQ1E5A-T-R8 3/4" x 5/8" 1" x 7/8"
6 LQ1E61-T-R1 25 x 22 19 x 16 6 LQ1E6A-T-R1 1" x 7/8" 3/4" x 5/8" LQHB
Note 1) Products marked “∗” are produced upon receipt of order. Note 1) Products marked “∗” are produced upon receipt of order.
(The body of the fitting is PTFE machined.) (The body of the fitting is PTFE machined.) TL
Note 2) For details of the applicable tubing sizes, refer to page 945. Note 2) For details of the applicable tubing sizes, refer to page 945. TIL
Dimensions TLM
TILM
Tubing extension union Metric Size TD
elbow reducing: LQ1E-T-R Model
A side B side
B C D E H L1 L2 L3
Min.
M port size
TID
Applicable tubing O.D. Tubing size (D) TH
LQ1E21-T-R8 8x6 8 TIH
30.5 20
B side LQ1E21-T-R9 ø6 10 x 8 10 3.6
LQ1E21-T-R10 12 x 10 12 34.5 24
D
LQ1E22-T-R8 6x4 4 6 6 15 14 28 25.5 15 16.5
LQ1E22-T-R9 8x6 8
ø4 30.5 20 2.6
LQ1E22-T-R10 10 x 8 10
LQ1E22-T-R11 12 x 10 12 34.5 24
øB
L3

LQ1E31-T-R1 8x6 8 33.6 20 6


L2

LQ1E31-T-R2 6x4 5 9 6 36.6 28.6 15 3.9


ø10
øM
LQ1E31-T-R8 12 x 10 12 37.6 24
∗ LQ1E31-T-R9 7.4
19 x 16 — — 19 33.5 46.5 35
C

A side 20 17 23
SMC

6
LQ1E32-T-R1 6x4 6 28.6 15 3.9
LQ1E32-T-R8 10 x 8 5 9 10 36.6 33.6 20
ø8
C (E) H LQ1E32-T-R9 12 x 10 12 37.6 24 5.5
∗ LQ1E32-T-R10 19 x 16 — — 19 33.5 46.5 35
L1
LQ1E41-T-R1 10 x 8 10 8
Class 2 to 5 35 20
LQ1E41-T-R2 8x6 6 9 8 43 6
LQ1E41-T-R3 ø12 6x4 6 24 21 30 15 28 3.9
∗ LQ1E41-T-R8 19 x 16 19 39.6 49 35
∗ LQ1E41-T-R9 — — 9.4
25 x 22 25 41 60 46
∗ LQ1E51-T-R8 ø19 25 x 22 — — 25 29 26 48.5 66.5 46 39 15
øM LQ1E61-T-R1 ø25 19 x 16 8 18 19 39.5 36 69.5 61 35 49 15.8
Inch Size
A side B side Min.
Model B C D E H L1 L2 L3 M port size
Applicable tubing O.D. Tubing size (D)
∗ LQ1E2A-T-R8 3/8" x 1/4" 3/8" 23.5 32.3 24
1/4" — — 15 14 16.5 3.6
H

1 25 ∗ LQ1E2A-T-R9 1/2" x 3/8" 1/2" 25 36.3 28


∗ LQ1E3A-T-R1 1/4" x 5/32" 1/4" 27.2 29.5 18 3.9
∗ LQ1E3A-T-R8 3/8" 1/2" x 3/8" — — 1/2" 20 17 30.4 39.5 28 23
∗ LQ1E3A-T-R9 5.8
3/4" x 5/8" 3/4" 33.5 46.5 35
Class 6 ∗ LQ1E4A-T-R1 3/8" x 1/4" 3/8" 34.8 38 24 6.3
∗ LQ1E4A-T-R8 1/2" 3/4" x 5/8" — — 3/4" 24 21 39.6 49 35 28
∗ LQ1E4A-T-R9 9
1" x 7/8" 1" 41 60 46
Note) Products marked “∗” are produced upon receipt of order. ∗ LQ1E5A-T-R8 3/4" 1" x 7/8" — — 1" 29 26 48.5 66.5 46 39 15
(The body of the fitting is PTFE machined.) LQ1E6A-T-R1 1" 3/4" x 5/8" 8 18 3/4" 39.5 36 69.5 61 35 49 15.8
905 A
LQ1 Series
Tubing Extension
Union Tee Reducing
How to Order

Tubing
connection
LQ1 T 2 1 T T1 R39
Packaging
Fitting type Symbol Packaging
Symbol Type Nil Clean packaging equivalent to Class M3.5
T Union tee 1 Standard packaging equivalent to Class M5.5

Body size Piping type (according to the combination table)


(according to the combination table)
Symbol Type
Tubing type R Reducing
Symbol Type
1, 2 Metric
Fitting type
A Inch
Symbol Type
T1 Type 1
Piping type T2 Type 2
Symbol Type T3 Type 3
T Tubing extension

Size combination (Metric) Size combination (Inch)


A side (Left) B side (Center) C side (Right) A side (Left) B side (Center) C side (Right)
Class

Class

Model Applicable tubing size (O.D. x I.D.) / Model Applicable tubing size (O.D. x I.D.) /
Tubing extensions (O.D. x I.D.) Tubing extensions (O.D. x I.D.)
∗ LQ1T21-TT1-R39 6x4 Tube 10 x 8 3 LQ1T3A-TT2-R5 Tube 3/8" x 1/4" 3/8" x 1/4" 1/4" x 5/32"
2 6x4
∗ LQ1T21-TT2-R41 Tube 10 x 8 6x4 ∗ LQ1T4A-TT1-R1 1/2" x 3/8"
Tube 3/8" x 1/4"
∗ LQ1T32-TT1-R37 8x6 Tube 10 x 8 4 ∗ LQ1T4A-TT1-R7 3/8" x 1/4" 1/2" x 3/8"
3 8x6
∗ LQ1T32-TT2-R40 Tube 10 x 8 8x6 ∗ LQ1T4A-TT1-R37 1/2" x 3/8" Tube 3/4" x 5/8"
∗ LQ1T41-TT1-R1 Tube 10 x 8 ∗ LQ1T5A-TT1-R1 Tube 1/2" x 3/8"
4 12 x 10 12 x 10 3/4" x 5/8"
∗ LQ1T41-TT1-R37 Tube 19 x 16 ∗ LQ1T5A-TT1-R2 Tube 3/8" x 1/4"
∗ LQ1T51-TT1-R1 Tube 12 x 10 ∗ LQ1T5A-TT1-R3 1/4" x 5/32"
19 x 16 Tube 3/4" x 5/8"
∗ LQ1T51-TT1-R2 Tube 10 x 8 LQ1T5A-TT1-R5 3/4" x 5/8"
1/2" x 3/8"
LQ1T51-TT1-R5 12 x 10 5 LQ1T5A-TT1-R7 Tube 1/2" x 3/8"
Tube 19 x 16
5 ∗ LQ1T51-TT1-R13 6x4 19 x 16 LQ1T5A-TT2-R4 Tube 3/4" x 5/8" 1/4" x 5/32"
LQ1T51-TT1-R37 19 x 16 ∗ LQ1T5A-TT2-R40 Tube 1" x 7/8"
Tube 25 x 22
∗ LQ1T51-TT1-R38 6x4 LQ1T5A-TT3-R5 Tube 3/4" x 5/8" 3/4" x 5/8"
Tube 1/2" x 3/8"
LQ1T51-TT2-R4 Tube 19 x 16 6x4 ∗ LQ1T5A-TT3-R7 Tube 1/2" x 3/8"
∗ LQ1T61-TT1-R1 Tube 19 x 16 ∗ LQ1T6A-TT1-R1 Tube 3/4" x 5/8"
25 x 22
6 ∗ LQ1T61-TT1-R2 Tube 1/2" x 3/8" 25 x 22 ∗ LQ1T6A-TT1-R2 1" x 7/8" Tube 1/2" x 3/8"
6 1" x 7/8"
LQ1T61-TT2-R1 Tube 25 x 22 19 x 16 ∗ LQ1T6A-TT1-R3 Tube 3/8" x 1/4"
Note 1) Products marked “∗” are produced upon receipt of order. LQ1T6A-TT2-R1 Tube 3/4" x 5/8" 3/4" x 5/8"
(The body of the fitting is PTFE machined.) Note 1) Products marked “∗” are produced upon receipt of order.
Note 2) For details of the applicable tubing sizes, refer to page 945. (The body of the fitting is PTFE machined.)
Note 2) For details of the applicable tubing sizes, refer to page 945.

906
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

Dimensions
Tubing extension union tee reducing: LQ1T-T-R

H2
1/4
2
øM
B side B side
LVC
2 x øB 2 x øB

(E2)
LVA
L4

L2
L2

øM
3 3
øM
1 øM

F
F

1/4
A side C side
1/4
A side C side
1/4 LVH
H1 (E1) (E3) H3 L4 G (E3) H3
G
LVD
L1 L3 L1 L3
Type T1 Class 2 to 5 Type T2 Class 2 to 5 LVQ
LVP
H2
1/4

2
øM
B side LVW
LQ1
(E2)

2 x øB
L2

LQ3
F

A side C side

L4 G L5
LVN
L1 L3 LQHB
Type T3 Class 2 to 5 TL
Metric Size TIL
A side (Left) B side (Center) C side (Right)
Model B E1 E2 E3 F G H1 H2 H3 L1 L2 L3 L4 M1 M2 M3 portMin.size TLM
Applicable tubing O.D.
∗ LQ1T21-TT1-R39 ø6 Tube ø10 ø6 20 — — 17 30.6 35.5 30.6 24 — 23
TILM
∗ LQ1T21-TT2-R41 — 20 — — 17 23 3.6
Tube ø10 ø6 ø6 — 20 17 — 35.5 34.5 34.5 24 23 — TD
∗ LQ1T32-TT1-R37 ø8 Tube ø10 ø8 20 — 17 — 30.6 35.5 30.6 24 23 — TID
∗ LQ1T32-TT2-R40 — 20 — — 17 23 5.5
Tube ø10 ø8 ø8 — 20 — 17 35.5 34.5 34.5 24 — 23
∗ LQ1T41-TT1-R1 TH
ø12 Tube ø10 ø12 35 38 35 24 8
∗ LQ1T41-TT1-R37 — 24 — 24 — — 21 — 21 28 — 28 TIH
ø12 Tube ø19 ø12 39.5 49 39.5 35 9.4
∗ LQ1T51-TT1-R1 ø19 Tube ø12 ø19 41.5 47.5 41.5 28 10
∗ LQ1T51-TT1-R2 — — —
ø19 Tube ø10 ø19 29 — 29 26 — 26 41 44.5 41 25 39 — 39 8
LQ1T51-TT1-R5 ø12 Tube ø19 ø19 7 14 28 54 55.5 54 35 9.4
∗ LQ1T51-TT1-R13 ø6 Tube ø19 ø19 — 15 — 29 — — 14 — 26 29 54.5 45 35 16.5 — 39 3.6
LQ1T51-TT1-R37 ø19 Tube ø25 ø19 8 39.5 — 39.5 18 36 36 — 36 69.5 65.5 69.5 39.5 49 — 49 15
∗ LQ1T51-TT1-R38 ø6 Tube ø25 ø19 — 15 — 29 — — 14 — 26 32.2 64 48.2 46 16.5 —
39 3.6
LQ1T51-TT2-R4 Tube ø19 ø6 ø19 7 — 15 29 14 28 — 14 26 55.5 38.5 54 35 — 16.5
∗ LQ1T61-TT1-R1 ø25 Tube ø19 ø25 26 55.1 59.5 55.1 35 16
∗ LQ1T61-TT1-R2 — 39.5 — — — 36 49 —
ø25 Tube 1/2 ø25 39.5 21 36 53.5 52.5 53.5 28 49 9.5
LQ1T61-TT2-R1 Tube ø25 ø19 ø25 8 — 39.5 18 36 — 36 65.5 69.5 69.5 39.5 — 49 15

Inch Size
A side (Left) B side (Center) C side (Right)
Model B E1 E2 E3 F G H1 H2 H3 L1 L2 L3 L4 L5 M1 M3 portMin.size
M2
Applicable tubing O.D.
LQ1T3A-TT2-R5 Tube 3/8 3/8 1/4 5 — 20 15 9 18
36.6 — 17 14 37.6 36.6 24 — — 23
16.5 3.6
∗ LQ1T4A-TT1-R1 1/2 Tube 3/8 1/2 — 24 — 24 — 38 — 21 — 21 34 34 24 — 28 28— 6.3
∗ LQ1T4A-TT1-R7 3/8 Tube 3/8 1/2 — 20 — 24 — 38 — 17 — 21 34 34 24 — 23 28— 5.8
∗ LQ1T4A-TT1-R37 1/2 Tube 3/4 1/2 — 24 — 24 — 49 — 21 — 21 39.5 39.5 35 — 28 28— 9
∗ LQ1T5A-TT1-R1 3/4 Tube 1/2 3/4 — 29 — 29 — —
47.5 26 — 26 41.9 41.9 28 — 39 39— 9.5
∗ LQ1T5A-TT1-R2 3/4 Tube 3/8 3/4 — 29 — 29 — —
44.5 26 — 26 41 41 24 — 39 39— 6.3
∗ LQ1T5A-TT1-R3 1/4 Tube 3/4 3/4 — 15 — 29 — —
54.5 14 — 26 29 45 35 — 16.5 39— 3.6
LQ1T5A-TT1-R5 1/2 Tube 3/4 3/4 7 29 — 29 14 28
55.5 26 — 26 54 54 35 — 39 39—
9
LQ1T5A-TT1-R7 1/2 Tube 1/2 3/4 7 29 — 29 14 28
44.5 26 — 26 49 54 24 — 39 39—
LQ1T5A-TT2-R4 Tube 3/4 1/4 3/4 7 — 15 29 14 28
38.5 — 14 26 55.5 54 35 — — 16.5
39 3.6
∗ LQ1T5A-TT2-R40 Tube 1 3/4 3/4 — — 29 29 — 54 — — 26 26 64 51.5 46 — — 39
39 15
LQ1T5A-TT3-R5 Tube 3/4 3/4 Tube 1/2 7 — 29 — 14 54 28 — 26 — 48.5 55.5 35 28 — 39

∗ LQ1T5A-TT3-R7 9.5
Tube 1/2 3/4 Tube 1/2 — — 29 — — —
44.5 — 26 — 46 46 28 28 — 39

∗ LQ1T6A-TT1-R1 ø25 Tube 3/4 ø25 59.5 55.1 55.1 35 — 16
∗ LQ1T6A-TT1-R2 ø25 Tube 1/2 ø25 — 39.5 — — — 36 — 52.5 28 — 49 — 9.5
∗ LQ1T6A-TT1-R3 39.5 36 53.5 53.5 49
ø25 Tube 3/8 ø25 48.5 24 — 6.3
LQ1T6A-TT2-R1 Tube 1 ø19 ø25 8 — 39.5 18 36 — 36 65.5 69.5 69.5 39.5 — — 49 15
Note) Products marked “∗” are produced upon receipt of order. (The body of the fitting is PTFE machined.)

907 A
LQ1 Series

How to Order Space Saving Type Fittings


This product, for use with products with one nut attached (insert bushing) has one nut removed.

LQ1 E 21 SN
Packaging
Fitting type
Symbol Packaging
E T
Nil Clean packaging equivalent to Class M3.5
Union Elbow Union Tee
1 Standard packaging equivalent to Class M5.5

Without a nut (including insert bushing) in one part


SMC

SMC

Combination of different diameter (on B side)


Symbol Applicable tubing size Symbol Applicable tubing size
P U
Size No. (mm) Size No. (inch)
Panel Mount Union Union
1 1 4x3 1 A 1/8" x 0.086"
1 2 3x2 — — —
2 1 6x4 2 A 1/4" x 5/32"
SMC
SMC

2 2 4x3 2 B 3/16" x 1/8"


3 1 10 x 8 2 C 1/8" x 0.086"
3 2 8x6 3 A 3/8" x 1/4"
3 3 6x4 3 B 1/4" x 5/32"
4 1 12 x 10 4 A 1/2" x 3/8"
4 2 10 x 8 4 B 3/8" x 1/4"
5 1 19 x 16 5 A 3/4" x 5/8"
5 2 12 x 10 5 B 1/2" x 3/8"
6 1 25 x 22 6 A 1" x 7/8"
Connection example 6 2 19 x 16 6 B 3/4" x 5/8"
Note 1) For each body class, the second and later numbers or
symbols indicate reducing. However, use of different
diameters is not available with size 1.
Note 2) Please choose the same size fitting as the fitting of the
connecting product.
Note 3) For details of applicable tubing sizes, refer to page 945.

Options
Panel mounting nut

LQN P 11
Applicable fitting Packaging
Symbol Size Symbol Packaging It is used to mount panels
11 1 Nil Clean packaging equivalent to Class M3.5 with a panel mount union.
12 2 1 Standard packaging equivalent to Class M5.5
13 3
14 4
15 5
16 6

908
Fluoropolymer Fittings
Hyper Fittings LQ1 Series

Options
Nut insert bush

LQ 1 2 U 03 In cases where exchanging the tubing size,


we recommend the U type.
Applicable fitting Packaging
LVC
Symbol Applicable fitting Symbol Packaging
1 LQ1 Nil Clean packaging equivalent to Class M3.5 LVA
1 Standard packaging equivalent to Class M5.5
Size LVH
Symbol Size Applicable tubing size
1
2
1
2
Metric Size Inch Size LVD
Applicable Size Applicable Size
3 3 Symbol Symbol
4 4
tubing size 1 2 3 4
5 6 tubing size 1 2 3 4 5 6 LVQ
03 ø3 x ø2   03 1/8" x 0.086"  
5 5 04 ø4 x ø3   05 3/16" x 1/8" 
6 6 06 ø6 x ø4   07 1/4" x 5/32"   LVP
08 ø8 x ø6  11 3/8" x 1/4"  
Type of part LVW
10 ø10 x ø8   13 1/2" x 3/8"  
Symbol Type of part 12 ø12 x ø10   19 3/4" x 5/8"  
U Nut insert bush
B Insert bush
19 ø19 x ø16   25 1" x 7/8"  LQ1
25 ø25 x ø22.5 
N Nut
Note 1) In the case of size 1, changing the tubing by reducing is LQ3
not available.
Note 2) For details of applicable tubing sizes, refer to page 945.
LVN
Blanking plug
LQHB
LQ 11 P 04 Packaging
Symbol Packaging
TL
TIL
Applicable fitting Nil Clean packaging equivalent to Class M3.5
1 Standard packaging equivalent to Class M5.5 TLM
Symbol Size Used to block fittings which are TILM
11 1 not being used.
12
Applicable tubing size TD
2
Metric Size Inch Size TID
13 3
14 4 Applicable Size Applicable Size TH
Symbol Symbol
15 5 tubing size 1 2 3 4 5 6 tubing size 1 2 3 4 5 6 TIH
16 6 03 ø3 x ø2   03 1/8" x 0.086"  
04 ø4 x ø3   05 3/16" x 1/8" 
06 ø6 x ø4   07 1/4" x 5/32"  
08 ø8 x ø6  11 3/8" x 1/4"  
10 ø10 x ø8   13 1/2" x 3/8"  
12 ø12 x ø10   19 3/4" x 5/8"  
19 ø19 x ø16   25 1" x 7/8" 
25 ø25 x ø22.5   Basic size  With reducer
 Basic size  With reducer
Note) For details of the applicable tubing sizes, refer to page 945.

Tubing plug

LQ1 2 CP Tubing plug will be a made-to-order product.

Size Size
Symbol Size Nil Without an insert bush
1 1 1 With an insert bush
2 2 Used to block fittings which are
3 3 Applicable tubing size not being used.
4 4 Metric Size Inch Size
5 5 Symbol Applicable tubing size Size Symbol Applicable tubing size Size
6 6 03 ø3 x ø2 03 1/8" x 0.086" 1
1
04 ø4 x ø3 07 1/4" x 5/32" 2
Fitting type 06 ø6 x ø4 2 11 3/8" x 1/4" 3
Symbol Type 08 ø8 x ø6 3 13 1/2" x 3/8" 4
CP Tubing caps 10 ø10 x ø8 3 19 3/4" x 5/8" 5
12 ø12 x ø10 4 25 1" x 7/8" 6
19 ø19 x ø16 5
25 ø25 x ø22 6
Note) For details of the applicable tubing sizes, refer to page 945.
909
LQ1 Series
Insertion Tool
Fittings
Changing tubing sizes

The tubing size can be changed within the same body class (body size) by replacing the nut and insert bushing. However, in case
of class 1, the tubing cannot be changed by reducing.

Tubing O.D.
Body
Metric sizes Inch sizes
class
ø3 ø4 ø6 ø8 ø10 ø12 ø19 ø25 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 1"
1   — — — — — —  — — — — — —
2    — — — — —    — — — —
3 — —    — — — — —   — — —
4 — — — —   — — — — —   — —
5 — — — — —   — — — — —   —
6 — — — — — —   — — — — —  

Parts composition
Component parts Caution
Nut Insert Collar (Insert assembly) 1. Connect tubing with special tools
 Basic size Yes Yes No Refer to the pamphlet “High-Purity Fluoropolymer Fittings Hyper Fitting/LQ1, 2
 Reducer type Yes Yes Yes Series Work Procedure Instructions” (M-E05-1) for connecting tubing and
special tools. (Downloadable from our web site.)

Changing the tubing size


Example) Changing the tubing from an O.D. 1/4" to O.D. 1/8" in LQ1 body class 2.

Prepare an insert bushing and nut for 1/8" O.D. tubing (LQ1-2U03) and change the tubing size.
(Refer to the section on how to order fitting parts.)
Note) Tubing is sold separately.
Insert bushing
Insert bushing
LQ1-2B07
Nut LQ1-2B03
LQ1-2N07 Nut
LQ1-2N03

Collar
Tubing Tubing
Tubing O.D. 1/4"
LQ1-2U07 Tubing O.D. 1/8"
(Basic size) LQ1-2U03
(Reducer type)

910
LVC
LVA
LVH
LVD
LVQ
LVP
LVW
LQ1
LQ3
LVN
LQHB
TL
TIL
TLM
TILM
TD
TID
TH
TIH

911
Fluoropolymer Fittings
Hyper Fittings / Flare Type

LQ3 Series RoHS

How to Order

Threaded
connection
LQ3 H 11 M
Fitting type Nut material, packaging
Symbol Type Symbol Nut material Packaging
H Connector Nil PFA Clean packaging equivalent to Class M3.5
L Elbow 1 PFA Standard packaging equivalent to Class M5.5
B Branch tee 2 PVDF Clean packaging equivalent to Class M3.5
R Run tee 3 PVDF Standard packaging equivalent to Class M5.5
∗ LQ3H8: Nut material PVDF is not available.

Thread type
Symbol Type
Nil R, Rc
N NPT

Piping type
Symbol Type
M Male
F Female

Size combination
Applicable tubing Applicable tubing
Size No. Port size Size No. Port size
size (mm) size (mm)
1 1 4x3 1 A 1/8" x 0.086" 1/8"
1/8"
1 2 3x2 2 A 1/8"
1/4" x 5/32"
2 1 1/8" 2 B 1/4"
6x4
2 2 1/4" 3 A 1/8"
3 1 10 x 8 3 B 1/4"
1/8" 3/8" x 1/4"
3 2 8x6 3 C 3/8"
3 3 10 x 8 3 D 1/2"
1/4"
3 4 8x6 4 A 1/4"
3 5 10 x 8 4 B 3/8"
3/8" 1/2" x 3/8"
3 6 4 C 1/2"
8x6
3 8 1/2" 4 D 3/4"
4 1 1/4" 5 A 3/8"
4 2 3/8" 5 B 3/4" x 5/8" 1/2"
12 x 10
4 3 1/2" 5 C 3/4"
4 4 3/4" 6 A 1/2"
5 1 3/8" 6 B 1" x 7/8" 3/4"
5 2 19 x 16 1/2" 6 C 1"
5 3 3/4" 7∗ A∗ 3/4"
6 1 1/2" 7∗ B∗ 1 1/4" x 1.1" 1"
6 2 25 x 22 3/4" 7∗ C∗ 1 1/4"
6 3 1" 8∗ C∗ 1 1/2" x 1.33" 1 1/2"
Note) For details of the applicable tubing ∗ Fitting type H, piping type M: Male connector only.
sizes, refer to page 945.

912
Fluoropolymer Fittings
Hyper Fittings / Flare Type LQ3 Series

How to Order

Tubing
connection
LQ3 E 11
LVC
Fitting type Nut material, packaging
Symbol Type Symbol Nut material Packaging LVA
E Union elbow Nil PFA Clean packaging equivalent to Class M3.5
T Union tee 1 PFA Standard packaging equivalent to Class M5.5 LVH
P Panel mount union 2 PVDF Clean packaging equivalent to Class M3.5
U Union 3 PVDF Standard packaging equivalent to Class M5.5 LVD
∗ LQ38A: Nut material PVDF is not available.
LVQ
Size combination
Applicable tubing Applicable tubing LVP
Size No. Size Symbol
size (mm) size (inch)
1 1 4x3 1 A 1/8" x 0.086" LVW
1 2 3x2 2 A 1/4" x 5/32"
2 1 6x4 3 A 3/8" x 1/4" LQ1
3 1 10 x 8 4 A 1/2" x 3/8"
3 2 8x6 5 A 3/4" x 5/8" LQ3
4 1 12 x 10 6 A 1" x 7/8"
5 1 19 x 16 7∗ A∗ 1 1/4" x 1.1" LVN
6 1 25 x 22 8∗ A∗ 1 1/2" x 1.33"
Note) For details of the applicable ∗ P: Without panel mounting LQHB
tubing sizes, refer to page 945. TL
TIL
TLM
TILM
TD
TID
TH
TIH

913
LQ3 Series

Specifications

Model LQ310 LQ320 LQ330 LQ340 LQ350 LQ360 LQ370


Feature
Material New PFA
Maximum operating
pressure (at 20°C) 1.0 MPa

Refer to the withstand pressure and heat resistance


Proof pressure
performance data.
Operating Nut material PVDF 0 to 150°C
temperature Nut material PFA 0 to 200°C

Withstand Pressure and Heat Resistance Performance

Specific Product Precautions 4.0

Be sure to read this before handling 3.5


the products. Refer to back page 50
for Safety Instructions. 3.0

Piping
Pressure (MPa)

2.5

Caution 2.0
1. Connect tubing with special tools
Please refer to the LQ3 series mounting 1.5
method in “High Purity Fluoropolymer Fit-
tings: Hyper Fitting/Flare Type” (M-E06-4) 1.0
for tubing connection and special tools.
(Downloadable from our web site.) 0.5

0 20 40 60 80 100 120 140 160 180 200


Temperature (°C)

1/8", ø3, 1/4", ø4, ø6 tubings 3/8", ø8, ø10 tubings


1/2", ø12 tubings 3/4", ø19, 1", ø25 tubings
1 1/4" tubing

2. Tighten the nut until it touches the


end surface of the body, and then
tighten it an additional 1/8 turn. If
the nut won’t turn any further, then
it means a sufficient tightening
has occurred. Refer to the proper
tightening torques shown below.

Tightening torque for piping


Body class Torque (N·m)
1 0.7 to 0.9
2 1.6 to 1.8
3 3.2 to 3.5
4 5.0 to 5.3
5 10.0 to 10.5
6 22.5 to 23.0
7 23.0 to 26.5

A 914
Fluoropolymer Fittings
Hyper Fittings / Flare Type LQ3 Series

Dimensions
Male connector: LQ3H-M

L, L’
Metric Size
(A, A’) H LVC
Applicable Connection Min.
W
Model tubing threads A A’ E E’ H L L’ M W N port
øM O.D. R/NPT size LVA
øN

LQ3H11-M ø4 2.5
LQ3H12-M ø3
1/8" 29.5 28.5 10 9 11 33.5 32.5 14 10 4
2
LVH
Port size (E, E’) LQ3H21-M 1/8" 39.5 38.5 4
R (NPT) LQ3H22-M
ø6
1/4" 37.5 36.5
17 16 16 43.5 42.5 20 14
6
4 LVD
LQ3H31-M ø10
LQ3H32-M ø8
1/8" 51 48 4.4 4.4 LVQ
LQ3H33-M ø10
(A,A’): Reference dimension after installation LQ3H34-M ø8
1/4" 49 46
22.5 19.5 21
55 52
25 18
6.4 6.4 LVP
(E,E’): Reference dimension for the inserted
LQ3H35-M ø10 10 7.5
tubing from the end surface of the nut
LQ3H36-M
3/8" 48.5 45.5 LVW
(A’),L’,E’: Nut material PVDF dimensions ø8 10 6.4
W: Width across flats dimension LQ3H38-M 1/2" 54 51 62 59
LQ3H41-M 1/4" 58 56 6 6 LQ1
LQ3H42-M 3/8" 57.5 55.5 64 62 8 8
LQ3H43-M
ø12
1/2" 56 54
24 22 24 29 22
9.5 LQ3
9.5
LQ3H44-M 3/4" 59.8 57.6 69.3 67.1 16
øM
LQ3H51-M 3/8" 69.5 67 8 8 LVN
H

LQ3H52-M ø19 1/2" 68 65.5 26.5 24 32 76 73.5 37 30 10 10


LQ3H53-M 3/4" 66.5 64 16 16 LQHB
LQ3H61-M 1/2" 80 76 10 10
TL
LQ3H62-M ø25 3/4" 78.5 74.5 30 26 41 88 84 49 36 16 16 TIL
LQ3H63-M 1" 77.5 73.5 22 22
Class 7, 8 TLM
TILM
Inch Size TD
Applicable Connection Min. TID
Model tubing threads A A’ E E’ H L L’ M W N port TH
O.D. R/NPT size TIH
LQ3H1A-M 1/8" 1/8" 29.5 28.5 10 9 11 33.5 32.5 14 10 4 2
LQ3H2A-M 1/8" 39.5 38.5 4
1/4" 17 16 16 43.5 42.5 20 14 4
LQ3H2B-M 1/4" 37.5 36.5 6
LQ3H3A-M 1/8" 51 48 4.4 4.4
LQ3H3B-M 1/4" 49 46 55 52 6.4
3/8" 22.5 19.5 21 25 18
LQ3H3C-M 3/8" 48.5 45.5 6.4
10
LQ3H3D-M 1/2" 54 51 62 59
LQ3H4A-M 1/4" 58 56 6 6
LQ3H4B-M 3/8" 57.5 55.5 64 62 8 8
1/2" 24.5 22.5 24 29 22
LQ3H4C-M 1/2" 56 54 9.5
9.5
LQ3H4D-M 3/4" 59.8 57.6 69.3 67.1 16
LQ3H5A-M 3/8" 69.5 67 8 8
LQ3H5B-M 3/4" 1/2" 68 65.5 26.5 24 32 76 73.5 37 30 10 10
LQ3H5C-M 3/4" 66.5 64 16 16
LQ3H6A-M 1/2" 80 76 10 10
LQ3H6B-M 1" 3/4" 78.5 74.5 30 26 41 88 84 49 36 16 16
LQ3H6C-M 1" 77.5 73.5 22 22
LQ3H7A-M 3/4" 96.5 96.5 16 16
LQ3H7B-M 1 1/4" 1" 95.5 95.5 35 35 50 106 106 64 46 22 22
LQ3H7C-M 1 1/4" 93.3 93.3 28.5 28.5
LQ3H8C-M 1 1/2" 1 1/2" 101.3 — 39 — 60 114 — 77 55 36 36

915 A
LQ3 Series

Dimensions
Female connector: LQ3H-F

Port size Metric Size


Rc (NPT)
L, L’ Applicable Connection Min.
H Model tubing threads E E’ H L L’ M port W Y
W O.D. Rc/NPT size
øM LQ3H11-F ø4 2.5
1/8" 10 9 11 35 34 14 10 18.5
LQ3H12-F ø3 2
øY

LQ3H21-F 1/8" 40 39 18.5


ø6 17 16 16 20 4 14
(E, E’) LQ3H22-F 1/4" 45 44 21.5
LQ3H31-F ø10 7.5
1/8" 50.5 47.5 18.5
LQ3H32-F ø8 6.4
LQ3H33-F ø10 7.5
1/4" 22.5 19.5 21 55 52 25 18 21.5
LQ3H34-F ø8 6.4
(E,E’): Reference dimension for the inserted LQ3H35-F ø10 7.5
tubing from the end surface of the nut 3/8" 55.5 52.5 25
LQ3H36-F ø8 6.4
(E’),L’: Nut material PVDF dimensions LQ3H41-F 1/4" 55.5 53 21.5
W: Width across flats dimension
LQ3H42-F ø12 3/8" 24 22 24 58 56 29 9.5 22 25
LQ3H43-F 1/2" 66 64 29.5
LQ3H51-F 3/8" 67 64.5 14 25
LQ3H52-F ø19 1/2" 26.5 24 32 72 69.5 37 30 29.5
16
LQ3H53-F 3/4" 73.5 71 36
LQ3H61-F 1/2" 81.5 77.5 17.5 29.5
LQ3H62-F ø25 3/4" 30 26 41 83 79 49 36 36
22
LQ3H63-F 1" 90.5 86.5 44.5

Inch Size
Applicable Connection Min.
Model tubing threads E E’ H L L’ M port W Y
O.D. Rc/NPT size
LQ3H1A-F 1/8" 1/8" 10 9 11 35 34 14 2 10 18.5
LQ3H2A-F 1/8" 40 39 18.5
1/4" 17 16 16 20 4 14
LQ3H2B-F 1/4" 45 44 21.5
LQ3H3A-F 1/8" 50.5 47.5 18.5
LQ3H3B-F 3/8" 1/4" 22.5 19.5 21 55 52 25 6.4 18 21.5
LQ3H3C-F 3/8" 55.5 52.5 25
LQ3H4A-F 1/4" 55.5 53 21.5
LQ3H4B-F 1/2" 3/8" 24.5 22.5 24 58 56 29 9.5 22 25
LQ3H4C-F 1/2" 66 64 29.5
LQ3H5A-F 3/8" 67 64.5 14 25
LQ3H5B-F 3/4" 1/2" 26.5 24 32 72 69.5 37 30 29.5
16
LQ3H5C-F 3/4" 73.5 71 36
LQ3H6A-F 1/2" 81.5 77.5 17.5 29.5
LQ3H6B-F 1" 3/4" 30 26 41 83 79 49 36 36
22
LQ3H6C-F 1" 90.5 86.5 44.5

A 916
Fluoropolymer Fittings
Hyper Fittings / Flare Type LQ3 Series

Dimensions
Male elbow: LQ3L-M

Port size Metric Size


R (NPT) LVC
L1, L1’ Applicable Connection Min.
Model tubing threads A E E’ H L1 L1’ L2 M N port
øN O.D. R/NPT size LVA
LQ3L11-M ø4 2.5
LQ3L12-M ø3
1/8" 12.5 10 9 11 26 25 16.5 14 4
2
LVH
L2
(A)

øM
LQ3L21-M 1/8" 18.5 4
LQ3L22-M
ø6
1/4" 16.5
17 16 16 33.5 32.5 22.5 20
6
4 LVD
LQ3L31-M ø10
(E, E’) H LQ3L32-M ø8
1/8" 24 4.4 4.4 LVQ
LQ3L33-M ø10
LQ3L34-M ø8
1/4" 22
22.5 19.5 21
46 43 28
25
6.4 6.4 LVP
LQ3L35-M ø10 7.5
LQ3L36-M
3/8" 21.5 10 LVW
(A): Reference dimension after installation ø8 6.4
(E,E’): Reference dimension for the inserted LQ3L38-M 1/2" 24.5 47.5 44.5 32.5 9.5
tubing from the end surface of the nut LQ3L41-M 1/4" 27 6 6 LQ1
(E’),L1’: Nut material PVDF dimensions LQ3L42-M ø12 3/8" 26.5 24 22 24 54.5 52.5 33 29 8 8
LQ3L43-M 1/2" 25 9.5 9.5 LQ3
LQ3L51-M 3/8" 33.5 8 8
LQ3L52-M ø19 1/2" 32 26.5 24 32 64 61.5 40 37 10 10 LVN
øM
LQ3L53-M 3/4" 30.5 16 16
H

LQ3L61-M 1/2" 38 10 10 LQHB


LQ3L62-M ø25 3/4" 36.5 30 26 41 77 73 46 49 16 16
TL
LQ3L63-M 1" 35.5 22 22 TIL
TLM
Class 7 Inch Size TILM
Applicable Connection Min. TD
Model tubing threads A E E’ H L1 L1’ L2 M N port TID
O.D. R/NPT size TH
LQ3L1A-M 1/8" 1/8" 12.5 10 9 11 26 25 16.5 14 4 2 TIH
LQ3L2A-M 1/8" 18.5 4
1/4" 17 16 16 33.5 32.5 22.5 20 4
LQ3L2B-M 1/4" 16.5 6
LQ3L3A-M 1/8" 24 4.4 4.4
LQ3L3B-M 1/4" 22 46 43 28 6.4
3/8" 22.5 19.5 21 25
LQ3L3C-M 3/8" 21.5 10 6.4
LQ3L3D-M 1/2" 24.5 47.5 44.5 32.5 9.5
LQ3L4A-M 1/4" 27 6 6
LQ3L4B-M 1/2" 3/8" 26.5 24.5 22.5 24 54.5 52.5 33 29 8 8
LQ3L4C-M 1/2" 25 9.5 9.5
LQ3L5A-M 3/8" 33.5 8 8
LQ3L5B-M 3/4" 1/2" 32 26.5 24 32 64 61.5 40 37 10 10
LQ3L5C-M 3/4" 30.5 16 16
LQ3L6A-M 1/2" 38 10 10
LQ3L6B-M 1" 3/4" 36.5 30 26 41 77 73 46 49 16 16
LQ3L6C-M 1" 35.5 22 22

917 A
LQ3 Series

Dimensions
Female elbow: LQ3L-F

øY
Port size
Metric Size
Rc (NPT) Applicable Connection Min.
øB Model tubing threads B C E E’ H L1 L1’ L2 M port Y
O.D. Rc/NPT size
L2

øM
LQ3L11-F ø4 2.5
C

1/8" 3.5 4.8 10 9 11 28.5 27.5 19.5 14 18.5


LQ3L12-F ø3 2
LQ3L21-F 1/8" 20 18.5
C (E, E’) H ø6 4 6 17 16 16 34.5 33.5 20 4
LQ3L22-F 1/4" 22 21.5
L1, L1’ LQ3L31-F ø10 7.5
1/8" 23 18.5
LQ3L32-F ø8 6.4
LQ3L33-F ø10 7.5
1/4" 5 9 22.5 19.5 21 47.5 44.5 24 25 21.5
LQ3L34-F ø8 6.4
(E,E’): Reference dimension for the inserted LQ3L35-F ø10 7.5
tubing from the end surface of the nut 3/8" 25.5 25
LQ3L36-F ø8 6.4
(E’),L1’: Nut material PVDF dimensions
LQ3L41-F 1/4" 23.5 21.5
LQ3L42-F ø12 3/8" 6 10 24 22 24 52.5 50.5 26 29 9.5 25
LQ3L43-F 1/2" 30 29.5
LQ3L51-F 3/8" 30.5 14 25
LQ3L52-F ø19 1/2" 7 14 26.5 24 32 64 61.5 35.5 37 29.5
16
LQ3L53-F 3/4" 37 36
LQ3L61-F 1/2" 41 17.5 29.5
LQ3L62-F ø25 3/4" 8 18 30 26 41 78 74 42.5 49 36
22
LQ3L63-F 1" 46 44.5

Inch Size
Applicable Connection Min.
Model tubing threads B C E E’ H L1 L1’ L2 M port Y
O.D. Rc/NPT size
LQ3L1A-F 1/8" 1/8" 3.5 4.8 10 9 11 28.5 27.5 19.5 14 2 18.5
LQ3L2A-F 1/8" 20 18.5
1/4" 4 6 17 16 16 34.5 33.5 20 4
LQ3L2B-F 1/4" 22 21.5
LQ3L3A-F 1/8" 23 18.5
LQ3L3B-F 3/8" 1/4" 5 9 22.5 19.5 21 47.5 44.5 24 25 6.4 21.5
LQ3L3C-F 3/8" 25.5 25
LQ3L4A-F 1/4" 23.5 21.5
LQ3L4B-F 1/2" 3/8" 6 10 24.5 22.5 24 52.5 50.5 26 29 9.5 25
LQ3L4C-F 1/2" 30 29.5
LQ3L5A-F 3/8" 30.5 14 25
LQ3L5B-F 3/4" 1/2" 7 14 26.5 24 32 64 61.5 35.5 37 29.5
16
LQ3L5C-F 3/4" 37 36
LQ3L6A-F 1/2" 41 17.5 29.5
LQ3L6B-F 1" 3/4" 8 18 30 26 41 78 74 42.5 49 36
22
LQ3L6C-F 1" 46 44.5

A 918
Fluoropolymer Fittings
Hyper Fittings / Flare Type LQ3 Series

Dimensions
Male branch tee: LQ3B-M

øN Port size Metric Size


R (NPT) LVC
Applicable Connection Min.
2 x øB
Model tubing threads A B E E’ F G H L1 L1’ L2 M N port
LVA
L2

O.D. R/NPT size


(A)

N
øM
F

LQ3B11-M ø4 2.5
LQ3B12-M ø3
1/8" 15 3.5 10 9 4.8 9.5 11 28.5 27.5 19 14 4
2
LVH
(E, E’) G (E, E’) H LQ3B21-M 1/8" 19.5 23.5 4
L1, L1’ L1, L1’ LQ3B22-M
ø6
1/4" 20.5
4 17 16 6 12 16 34.5 33.5
26.5
20
6
4 LVD
LQ3B31-M ø10
LQ3B32-M ø8
1/8" 22.5 26.5 4 4 LVQ
LQ3B33-M ø10
(A): Reference dimension after installation LQ3B34-M ø8
1/4" 23.5 5 22.5 19.5 9 18 21 47.5 44.5 29.5 25 6.4 6.4 LVP
(E,E’): Reference dimension for the inserted
LQ3B35-M ø10 7.5
tubing from the end surface of the nut
E’,L1’: Nut material PVDF dimensions LQ3B36-M ø8
3/8" 24 30.5 10
6.4 LVW
LQ3B41-M 1/4" 27 33 6 6
LQ3B42-M ø12 3/8" 27.5 6 24 22 10 20 24 52.5 50.5 34 29 LQ1
9.5 9.5
LQ3B43-M 1/2" 29 37
LQ3B51-M 3/8" 32.5 39 LQ3
10 10
LQ3B52-M ø19 1/2" 34 7 26.5 24 14 28 32 64 61.5 42 37
LQ3B53-M 3/4" 34.5 44 16 16 LVN
LQ3B61-M 1/2" 42 50 10 10
LQ3B62-M ø25 3/4"
42.5
8 30 26 18 36 41 78 74 52 49 16 16 LQHB
LQ3B63-M 1" 53 22 22
TL
TIL
Inch Size TLM
TILM
Applicable Connection Min.
Model tubing threads A B E E’ F G H L1 L1’ L2 M N port TD
O.D. R/NPT size TID
LQ3B1A-M 1/8" 1/8" 15 3.5 10 9 4.8 9.5 11 28.5 27.5 19 14 4 2 TH
LQ3B2A-M 1/8" 19.5 23.5 4 TIH
1/4" 4 17 16 6 12 16 34.5 33.5 20 4
LQ3B2B-M 1/4" 20.5 26.5 6
LQ3B3A-M 1/8" 22.5 26.5 4 4
LQ3B3B-M 3/8" 1/4" 23.5 5 22.5 19.5 9 18 21 47.5 44.5 29.5 25 6.4
6.4
LQ3B3C-M 3/8" 24 30.5 10
LQ3B4A-M 1/4" 27 33 6 6
LQ3B4B-M 1/2" 3/8" 27.5 6 24.5 22.5 10 20 24 52.5 50.5 34 29
9.5 9.5
LQ3B4C-M 1/2" 29 37
LQ3B5A-M 3/8" 32.5 39
10 10
LQ3B5B-M 3/4" 1/2" 34 7 26.5 24 14 28 32 64 61.5 42 37
LQ3B5C-M 3/4" 34.5 44 16 16
LQ3B6A-M 1/2" 42 50 10 10
LQ3B6B-M 1" 3/4" 8 30 26 18 36 41 78 74 52 49 16 16
42.5
LQ3B6C-M 1" 53 22 22

919 A
LQ3 Series

Dimensions
Female branch tee: LQ3B-F

øY Port size Metric Size


Rc (NPT)
Applicable Connection Min.
2 x øB
Model tubing threads B E E’ F G H L1 L1’ L2 M port Y
L2

N øM O.D. Rc/NPT size


F

LQ3B11-F ø4 2.5
1/8" 3.5 10 9 4.8 9.5 11 28.5 27.5 19.5 14 18.5
LQ3B12-F ø3 2
(E, E’) G (E, E’) H
LQ3B21-F 1/8" 20 18.5
L1, L1’ L1, L1’ ø6 4 17 16 6 12 16 34.5 33.5 20 4
LQ3B22-F 1/4" 22 21.5
LQ3B31-F ø10 7.5
1/8" 23 18.5
LQ3B32-F ø8 6.4
LQ3B33-F ø10 7.5
(E,E’): Reference dimension for the inserted 1/4" 5 22.5 19.5 9 18 21 47.5 44.5 24 25 21.5
tubing from the end surface of the nut LQ3B34-F ø8 6.4
(E’),L1’: Nut material PVDF dimensions LQ3B35-F ø10 7.5
3/8" 25.5 25
LQ3B36-F ø8 6.4
LQ3B41-F 1/4" 23.5 21.5
LQ3B42-F ø12 3/8" 6 24 22 10 20 24 52.5 50.5 26 29 9.5 25
LQ3B43-F 1/2" 30 29.5
LQ3B51-F 3/8" 30.5 14 25
LQ3B52-F ø19 1/2" 7 26.5 24 14 28 32 64 61.5 35.5 37 29.5
16
LQ3B53-F 3/4" 37 36
LQ3B61-F 1/2" 41 17.5 29.5
LQ3B62-F ø25 3/4" 8 30 26 18 36 41 78 74 42.5 49 36
22
LQ3B63-F 1" 46 44.5

Inch Size
Applicable Connection Min.
Model tubing threads B E E’ F G H L1 L1’ L2 M port Y
O.D. Rc/NPT size
LQ3B1A-F 1/8" 1/8" 3.5 10 9 4.8 9.5 11 28.5 27.5 19.5 14 2 18.5
LQ3B2A-F 1/8" 20 18.5
1/4" 4 17 16 6 12 16 34.5 33.5 20 4
LQ3B2B-F 1/4" 22 21.5
LQ3B3A-F 1/8" 23 18.5
LQ3B3B-F 3/8" 1/4" 5 22.5 19.5 9 18 21 47.5 44.5 24 25 6.4 21.5
LQ3B3C-F 3/8" 25.5 25
LQ3B4A-F 1/4" 23.5 21.5
LQ3B4B-F 1/2" 3/8" 6 24.5 22.5 10 20 24 52.5 50.5 26 29 9.5 25
LQ3B4C-F 1/2" 30 29.5
LQ3B5A-F 3/8" 30.5 14 25
LQ3B5B-F 3/4" 1/2" 7 26.5 24 14 28 32 64 61.5 35.5 37 29.5
16
LQ3B5C-F 3/4" 37 36
LQ3B6A-F 1/2" 41 17.5 29.5
LQ3B6B-F 1" 3/4" 8 30 26 18 36 41 78 74 42.5 49 36
22
LQ3B6C-F 1" 46 44.5

A 920
Fluoropolymer Fittings
Hyper Fittings / Flare Type LQ3 Series

Dimensions
Male run tee: LQ3R-M

Metric Size
(E, E’)

LVC
Applicable Connection Min.
Model tubing threads A B E E’ F G H L1 L1’ L2 M N port
O.D. R/NPT size LVA
L1, L1’

2 x øB
LQ3R11-M ø4 2.5
øM LQ3R12-M ø3
1/8" 15 3.5 10 9 4.8 9.5 11 28.5 27.5 19 14 4
2
LVH
F

LQ3R21-M 1/8" 19.5 23.5 4


ø6 4 17 16 6 12 16 34.5 33.5 20 4 LVD
øN

LQ3R22-M 1/4" 20.5 26.5 6


G H
LQ3R31-M ø10
(A) (E, E’) LQ3R32-M ø8
1/8" 22.5 26.5 4 4 LVQ
L2 L1, L1’ LQ3R33-M ø10
Port size LQ3R34-M ø8
1/4" 23.5 5 22.5 19.5 9 18 21 47.5 44.5 29.5 25 6.4 6.4 LVP
R (NPT) LQ3R35-M ø10 7.5
LQ3R36-M ø8
3/8" 24 30.5 10
6.4 LVW
(A): Reference dimension after installation LQ3R41-M 1/4" 27 33 6 6
(E,E’): Reference dimension for the inserted
LQ3R42-M ø12 3/8" 27.5 6 24 22 10 20 24 52.5 50.5 34 29 LQ1
tubing from the end surface of the nut 9.5 9.5
(E’),L’: Nut material PVDF dimensions LQ3R43-M 1/2" 29 37
LQ3R51-M 3/8" 32.5 39 LQ3
10 10
LQ3R52-M ø19 1/2" 34 7 26.5 24 14 28 32 64 61.5 42 37
LQ3R53-M 3/4" 34.5 44 16 16 LVN
LQ3R61-M 1/2" 42 50 10 10
LQ3R62-M ø25 3/4"
42.5
8 30 26 18 36 41 78 74 52 49 16 16 LQHB
LQ3R63-M 1" 53 22 22
TL
TIL
Inch Size TLM
TILM
Applicable Connection Min.
Model tubing threads A B E E’ F G H L1 L1’ L2 M N port TD
O.D. R/NPT size TID
LQ3R1A-M 1/8" 1/8" 15 3.5 10 9 4.8 9.5 11 28.5 27.5 19 14 4 2 TH
LQ3R2A-M 1/8" 19.5 23.5 4 TIH
1/4" 4 17 16 6 12 16 34.5 33.5 20 4
LQ3R2B-M 1/4" 20.5 26.5 6
LQ3R3A-M 1/8" 22.5 26.5 4 4
LQ3R3B-M 3/8" 1/4" 23.5 5 22.5 19.5 9 18 21 47.5 44.5 29.5 25 6.4
6.4
LQ3R3C-M 3/8" 24 30.5 10
LQ3R4A-M 1/4" 27 33 6 6
LQ3R4B-M 1/2" 3/8" 27.5 6 24.5 22.5 10 20 24 52.5 50.5 34 29
9.5 9.5
LQ3R4C-M 1/2" 29 37
LQ3R5A-M 3/8" 32.5 39
10 10
LQ3R5B-M 3/4" 1/2" 34 7 26.5 24 14 28 32 64 61.5 42 37
LQ3R5C-M 3/4" 34.5 44 16 16
LQ3R6A-M 1/2" 42 50 10 10
LQ3R6B-M 1" 3/4" 8 30 26 18 36 41 78 74 52 49 16 16
42.5
LQ3R6C-M 1" 53 22 22

921 A
LQ3 Series

Dimensions
Female run tee: LQ3R-F

Metric Size
(E, E’)

Applicable Connection Min.


Model tubing threads B E E’ F G H L1 L1’ L2 M port Y
O.D. Rc/NPT size
L1, L1’

2 x øB
LQ3R11-F ø4 2.5
øM 1/8" 3.5 10 9 4.8 9.5 11 28.5 27.5 19.5 14 18.5
LQ3R12-F ø3 2
F
øY

LQ3R21-F 1/8" 20 18.5


ø6 4 17 16 6 12 16 34.5 33.5 20 4
LQ3R22-F 1/4" 22 21.5
G (E, E’) H LQ3R31-F ø10 7.5
1/8" 23 18.5
L2 L1, L1’ LQ3R32-F ø8 6.4
LQ3R33-F ø10 7.5
Port size 1/4" 5 22.5 19.5 9 18 21 47.5 44.5 24 25 21.5
LQ3R34-F ø8 6.4
Rc (NPT)
LQ3R35-F ø10 7.5
3/8" 25.5 25
LQ3R36-F ø8 6.4
LQ3R41-F 1/4" 23.5 21.5
(E,E’): Reference dimension for the inserted LQ3R42-F ø12 3/8" 6 24 22 10 20 24 52.5 50.5 26 29 9.5 25
tubing from the end surface of the nut LQ3R43-F 1/2" 30 29.5
(E’),L1’: Nut material PVDF dimensions LQ3R51-F 3/8" 30.5 14 25
LQ3R52-F ø19 1/2" 26.5 24 14 28 32 64 61.5 35.5 37 29.5
7 16
LQ3R53-F 3/4" 37 36
LQ3R61-F 1/2" 41 17.5 29.5
LQ3R62-F ø25 3/4" 8 30 26 18 36 41 78 74 42.5 49 36
22
LQ3R63-F 1" 46 44.5

Inch Size
Applicable Connection Min.
Model tubing threads B E E’ F G H L1 L1’ L2 M port Y
O.D. Rc/NPT size
LQ3R1A-F 1/8" 1/8" 3.5 10 9 4.8 9.5 11 28.5 27.5 19.5 14 2 18.5
LQ3R2A-F 1/8" 20 18.5
1/4" 4 17 16 6 12 16 34.5 33.5 20 4
LQ3R2B-F 1/4" 22 21.5
LQ3R3A-F 1/8" 23 18.5
LQ3R3B-F 3/8" 1/4" 5 22.5 19.5 9 18 21 47.5 44.5 24 25 6.4 21.5
LQ3R3C-F 3/8" 25.5 25
LQ3R4A-F 1/4" 23.5 21.5
LQ3R4B-F 1/2" 3/8" 6 24.5 22.5 10 20 24 52.5 50.5 26 29 9.5 25
LQ3R4C-F 1/2" 30 29.5
LQ3R5A-F 3/8" 30.5 14 25
LQ3R5B-F 3/4" 1/2" 7 26.5 24 14 28 32 64 61.5 35.5 37 29.5
16
LQ3R5C-F 3/4" 37 36
LQ3R6A-F 1/2" 41 17.5 29.5
LQ3R6B-F 1" 3/4" 8 30 26 18 36 41 78 74 42.5 49 36
22
LQ3R6C-F 1" 46 44.5

A 922
Fluoropolymer Fittings
Hyper Fittings / Flare Type LQ3 Series

Dimensions
Union elbow: LQ3E

Metric Size
LVC
Applicable Min.
Model tubing B C E E’ H L L’ M port
LVA
(E, E’)

øB O.D. size
L, L’

LQ3E11 ø4 2.5
LQ3E12 ø3
3.5 4.8 10 9 11 28.5 27.5 14
2
LVH
øM
LQ3E21 ø6 4 6 17 16 16 34.5 33.5 20 4
LVD
C

LQ3E31 ø10 7.5


5 9 22.5 19.5 21 47.5 44.5 25
LQ3E32 ø8 6.4
C (E, E’) H LQ3E41 ø12 6 10 24 22 24 52.5 50.5 29 9.5 LVQ
L, L’ LQ3E51 ø19 7 14 26.5 24 32 64 61.5 37 16
LQ3E61 ø25 8 18 30 26 41 78 74 49 22 LVP
LVW
Inch Size
(E,E’): Reference dimension for the inserted
tubing from the end surface of the nut Applicable Min. LQ1
Model tubing B C E E’ H L L’ M port
(E’),L’: Nut material PVDF dimensions
O.D. size
LQ3
LQ3E1A 1/8" 3.5 4.8 10 9 11 28.5 27.5 14 2
LQ3E2A 1/4" 4 6 17 16 16 34.5 33.5 20 4 LVN
øM LQ3E3A 3/8" 5 9 22.5 19.5 21 47.5 44.5 25 6.4
H

LQ3E4A 1/2" 6 10 24.5 22.5 24 52.5 50.5 29 9.5


LQHB
LQ3E5A 3/4" 7 14 26.5 24 32 64 61.5 37 16
LQ3E6A 1" 8 18 30 26 41 78 74 49 22 TL
LQ3E7A 1 1/4" 9 22 35 35 50 92.5 92.5 64 28 TIL
LQ3E8A 1 1/2" 11 28.5 39 — 60 100.5 — 77 36 TLM
Class 7, 8 TILM
TD
TID
TH
TIH
Union tee: LQ3T
(E, E’)

Metric Size
Applicable Min.
2 x øB Model tubing B E E’ F G H L L’ M port
O.D. size
L, L’

LQ3T11 ø4 2.5
øM 3.5 10 9 4.8 9.5 11 28.5 27.5 14
LQ3T12 ø3 2
F

LQ3T21 ø6 4 17 16 6 12 16 34.5 33.5 20 4


LQ3T31 ø10 7.5
(E, E’) G (E, E’) H 5 22.5 19.5 9 18 21 47.5 44.5 25
LQ3T32 ø8 6.4
L, L’ L, L’ LQ3T41 ø12 6 24 22 10 20 24 52.5 50.5 29 9.5
LQ3T51 ø19 7 26.5 24 14 28 32 64 61.5 37 16
LQ3T61 ø25 8 30 26 18 36 41 78 74 49 22

(E,E’): Reference dimension for the inserted


tubing from the end surface of the nut Inch Size
(E’),L’: Nut material PVDF dimensions
Applicable Min.
Model tubing B E E’ F G H L L’ M port
O.D. size
LQ3T1A 1/8" 3.5 10 9 4.8 9.5 11 28.5 27.5 14 2
LQ3T2A 1/4" 4 17 16 6 12 16 34.5 33.5 20 4
LQ3T3A 3/8" 5 22.5 19.5 9 18 21 47.5 44.5 25 6.4
LQ3T4A 1/2" 6 24.5 22.5 10 20 24 52.5 50.5 29 9.5
LQ3T5A 3/4" 7 26.5 24 14 28 32 64 61.5 37 16
LQ3T6A 1" 8 30 26 18 36 41 78 74 49 22
LQ3T7A 1 1/4" 9 35 35 22 44 50 92.5 92.5 64 28
LQ3T8A 1 1/2" 11 39 — 28.5 57 60 100.5 — 77 36

923 A
LQ3 Series

Dimensions
Panel mount union: LQ3P

J Metric Size
Panel thickness (max. t)
Applicable Min.
W2 W1 H Model tubing E E’ H J K L1 L1’ L2 L2’ M port t W1 W2
O.D. size
øM
LQ3P11 ø4 2.5
10 9 11 6 14.5 23.5 22.5 58 56 14 8 16 17
LQ3P12 ø3 2
LQ3P21 ø6 17 16 16 7 20.5 28 27 69 67 20 4 8 21 24
(E, E’) (E, E’)
LQ3P31 ø10 7.5
L1, L1’ 22.5 19.5 21 7 24.5 39 36 89 83 25 8 26 28
LQ3P32 ø8 6.4
L2, L2’ LQ3P41 ø12 24 22 24 9 30.5 44.5 42.5 100 96 29 9.5 8 32 36
Panel hole diameter øK

LQ3P51 ø19 26.5 24 32 9 36.5 50.5 48 117 112 37 16 13 41 43


LQ3P61 ø25 30 26 41 10 48.5 60 56 136 127.5 49 22 13 50 55

Inch Size
Applicable Min.
Model tubing E E’ H J K L1 L1’ L2 L2’ M port t W1 W2
O.D. size
LQ3P1A 1/8" 10 9 11 6 14.5 23.5 22.5 58 56 14 2 8 16 17
LQ3P2A 1/4" 17 16 16 7 20.5 28 27 69 67 20 4 8 21 24
LQ3P3A 3/8" 22.5 19.5 21 7 24.5 39 36 89 83 25 6.4 8 26 28
(E,E’): Reference dimension for the inserted
tubing from the end surface of the nut LQ3P4A 1/2" 24.5 22.5 24 9 30.5 44.5 42.5 100 96 29 9.5 8 32 36
(E’),L1’,L2’: Nut material PVDF dimensions LQ3P5A 3/4" 26.5 24 32 9 36.5 50.5 48 117 112 37 16 13 41 43
W: Width across flats dimension LQ3P6A 1" 30 26 41 10 48.5 60 56 136 127.5 49 22 13 50 55

Union: LQ3U

H Metric Size
W
Applicable
øM
Min.
Model tubing E E’ H L L’ M W
port size
O.D.
LQ3U11 ø4 2.5
10 9 11 46.5 44.5 14 10
(E, E’) (E, E’) LQ3U12 ø3 2
LQ3U21 ø6 17 16 16 57 55 20 4 14
L, L’
LQ3U31 ø10 7.5
22.5 19.5 21 79 73 25 18
LQ3U32 ø8 6.4
LQ3U41 ø12 24 22 24 88 84 29 9.5 22
(E,E’): Reference dimension for the inserted LQ3U51 ø19 26.5 24 32 103 98 37 16 30
tubing from the end surface of the nut LQ3U61 ø25 30 26 41 122 113.5 49 22 36
(E’),L’: Nut material PVDF dimensions
W: Width across flats dimension
Inch Size
Applicable
Min.
Model tubing E E’ H L L’ M port size
W
øM O.D.
H

LQ3U1A 1/8" 10 9 11 46.5 44.5 14 2 10


LQ3U2A 1/4" 17 16 16 57 55 20 4 14
LQ3U3A 3/8" 22.5 19.5 21 79 73 25 6.4 18
LQ3U4A 1/2" 24.5 22.5 24 88 84 29 9.5 22
LQ3U5A 3/4" 26.5 24 32 103 98 37 16 30
Class 7, 8
LQ3U6A 1" 30 26 41 122 113.5 49 22 36
LQ3U7A 1 1/4" 35 35 50 142 142 64 28.5 46
LQ3U8A 1 1/2" 39 — 60 152 — 77 36 55

A 924
LQ3 Series
Union Reducing
How to Order

Tubing
connection
LQ3 U 2 1 R1
Fitting type Nut material, packaging LVC
Symbol Type Symbol Nut material Packaging
U Union Nil PFA Clean packaging equivalent to Class M3.5 LVA
1 PFA Standard packaging equivalent to Class M5.5
Body size (according to the combination table) 2 PVDF Clean packaging equivalent to Class M3.5 LVH
Tubing type 3 PVDF Standard packaging equivalent to Class M5.5
Symbol Type
Type of piping (according to the combination table)
LVD
A side B side
A Inch
Symbol Type
1, 2 Metric
R Reducing
LVQ
Size combination (Metric) Size combination (Inch) LVP
A side B side A side B side
Size Model Size Model
Applicable tubing size (mm) Applicable tubing size (inch) LVW
1 LQ3U11-R1 4x3 3x2 2 LQ3U2A-R1 1/4" x 5/32" 1/8" x 0.086"

2
LQ3U21-R1
6x4
4x3
3
LQ3U3A-R1
3/8" x 1/4"
1/4" x 5/32" LQ1
LQ3U21-R2 3x2 LQ3U3A-R2 1/8" x 0.086"
LQ3U31-R1
10 x 8
8x6
4
LQ3U4A-R1
1/2" x 3/8"
3/8" x 1/4" LQ3
LQ3U31-R2 6x4 LQ3U4A-R2 1/4" x 5/32"
3
LQ3U32-R1
8x6
6x4 LQ3U5A-R1 1/2" x 3/8" LVN
LQ3U32-R2 4x3 5 LQ3U5A-R2 3/4" x 5/8" 3/8" x 1/4"

4
LQ3U41-R1
12 x 10
10 x 8 LQ3U5A-R3 1/4" x 5/32" LQHB
LQ3U41-R2 8x6 LQ3U6A-R1 3/4" x 5/8"
6 1" x 7/8" TL
LQ3U51-R1 12 x 10 LQ3U6A-R2 1/2" x 3/8"
5 19 x 16 TIL
LQ3U51-R2 10 x 8 7 LQ3U7A-R1 1 1/4" x 1.1" 1" x 7/8"
19 x 16 TLM
LQ3U61-R1 Note) For details of the applicable tubing sizes, refer to page 945.
6 25 x 22 TILM
LQ3U61-R2 12 x 10
TD
Note) For details of the applicable tubing sizes, refer to page 945. TID
TH
Dimensions TIH
Union reducing: LQ3U-R Metric Size
A side B side
Model E1 E1’ E2 E2’ H1 H2 L L’ M1 M2 portMinsi.ze W
Applicable tubing O.D.
LQ3U11-R1 ø4 ø3 10 9 10 9 11 11 46.5 44.5 14 14 2 10
H1 LQ3U21-R1 ø4 2.5
W H2 ø6 17 16 10 9 16 11 51 48.5 20 14 14
A side B side LQ3U21-R2 ø3 2
øM
2
LQ3U31-R1 ø8 22.5 19.5 21 79 73 25 6.4
ø10 22.5 19.5 21 25 18
LQ3U31-R2 ø6 17 16 16 66.5 62 20
øM1 4
1/4
LQ3U32-R1 ø6 17 16 16 66.5 62 20
ø8 22.5 19.5 21 25 18
(E1, E1’) (E2, E2’) LQ3U32-R2 ø4 10 9 11 62 58 14 2.5
LQ3U41-R1 ø10 7.5
L, L’ ø12 24 22 22.5 19.5 24 21 82.5 77 29 25 22
LQ3U41-R2 ø8 6.4
LQ3U51-R1 ø12 24 22 24 95.5 91 29 9.5
ø19 26.5 24 32 37 30
LQ3U51-R2 ø10 22.5 19.5 21 91 85.5 25 7.5
(E1,E1’,E2,E2’): Reference dimension for the LQ3U61-R1 ø19 26.5 24 32 112.5 105.5 37 16
inserted tubing from the end ø25 30 26 41 49 36
LQ3U61-R2 ø12 24 22 24 106.5 100 29 9.5
surface of the nut
(E1’,E2’),L’: Nut material PVDF dimensions Inch Size
A side B side
Model E1 E1’ E2 E2’ H1 H2 L L’ M1 M2 portMinsi.ze W
Applicable tubing O.D.
øM LQ3U2A-R1 1/4" 1/8" 17 16 10 9 16 11 51 48.5 20 14 2 14
LQ3U3A-R1 1/4" 17 16 16 66.5 62 20 4
H

3/8" 22.5 19.5 21 25 18


LQ3U3A-R2 1/8" 10 9 11 62 58 14 2
LQ3U4A-R1 3/8" 22.5 19.5 21 82.5 77 25 6.4
1/2" 24.5 22.5 24 29 22
LQ3U4A-R2 1/4" 17 16 16 72.5 69 20 4
LQ3U5A-R1 1/2" 24.5 22.5 24 95.5 91 29 9.5
LQ3U5A-R2 3/4" 3/8" 26.5 24 22.5 19.5 32 21 91 85.5 37 25 6.4 30
Class 7 LQ3U5A-R3 1/4" 17 16 16 81 77 20 4
LQ3U6A-R1 3/4" 26.5 24 32 112.5 105.5 37 16
1" 30 26 41 49 36
LQ3U6A-R2 1/2" 24.5 22.5 24 106.5 100 29 9.5
LQ3U7A-R1 1 1/4" 1" 35 35 30 26 50 41 132.5 128.2 64 49 22 46
925 A
LQ3 Series
Union Elbow Reducing
How to Order

Tubing
connection
LQ3 E 2 1 R1
A side
Fitting type Nut material, packaging
Symbol Type Symbol Nut material Packaging
E Union elbow Nil PFA Clean packaging equivalent to Class M3.5
1 PFA Standard packaging equivalent to Class M5.5
Body size (according to the combination table) 2 PVDF Clean packaging equivalent to Class M3.5
Tubing type 3 PVDF Standard packaging equivalent to Class M5.5
Symbol Type
Type of piping (according to the combination table)
B side A Inch
Symbol Type
1, 2 Metric
R Reducing
Size combination (Metric) Size combination (Inch)
A side B side A side B side
Size Model Size Model
Applicable tubing size (mm) Applicable tubing size (inch)
1 LQ3E11-R1 4x3 3x2 2 LQ3E2A-R1 1/4" x 5/32" 1/8" x 0.086"
LQ3E21-R1 4x3 LQ3E3A-R1 1/4" x 5/32"
2 6x4 3 3/8" x 1/4"
LQ3E21-R2 3x2 LQ3E3A-R2 1/8" x 0.086"
LQ3E31-R1 8x6 LQ3E4A-R1 3/8" x 1/4"
10 x 8 4 1/2" x 3/8"
LQ3E31-R2 6x4 LQ3E4A-R2 1/4" x 5/32"
3
LQ3E32-R1 6x4 LQ3E5A-R1 1/2" x 3/8"
8x6
LQ3E32-R2 4x3 5 LQ3E5A-R2 3/4" x 5/8" 3/8" x 1/4"
LQ3E41-R1 10 x 8 LQ3E5A-R3 1/4" x 5/32"
4 12 x 10
LQ3E41-R2 8x6 LQ3E6A-R1 3/4" x 5/8"
6 1" x 7/8"
LQ3E51-R1 12 x 10 LQ3E6A-R2 1/2" x 3/8"
5 19 x 16
LQ3E51-R2 10 x 8 Note) For details of the applicable tubing sizes, refer to page 945.
LQ3E61-R1 19 x 16
6 25 x 22
LQ3E61-R2 12 x 10
Note) For details of the applicable tubing sizes, refer to page 945.

Dimensions
Union elbow reducing: LQ3E-R Metric Size
A side B side
Model B C E1 E1’ E2 E2’ H1 H2 L1 L1’ L2 L2’ M1 M2 portMinsi.ze
Applicable tubing O.D.
LQ3E11-R1 ø4 ø3 3.5 4.8 10 9 10 9 11 11 28.5 27.5 28.5 27.5 14 14 2
LQ3E21-R1 ø4 2.5
ø6 4 6 17 16 10 9 16 11 34.5 33.5 30.5 29.5 20 14
LQ3E21-R2 ø3 2
1
øM

LQ3E31-R1 ø8 22.5 19.5 21 47.5 44.5 25 6.4


ø10 5 9 22.5 19.5 21 47.5 44.5 25
LQ3E31-R2 ø6 17 16 16 38 37 20
H1

4
1/4

LQ3E32-R1 ø6 17 16 16 38 37 20
ø8 5 9 22.5 19.5 21 47.5 44.5 25
LQ3E32-R2 ø4 10 9 11 33.5 32.5 14 2.5
LQ3E41-R1 ø10 7.5
ø12 6 10 24 22 22.5 19.5 24 21 52.5 50.5 48.5 45.5 29 25
(E1, E1’)

LQ3E41-R2 ø8 6.4
LQ3E51-R1 ø12 24 22 24 61.5 58.5 56.5 29 9.5
A side ø19 7 14 26.5 24 32 64 37
LQ3E51-R2 ø10 22.5 19.5 21 61.5 53.5 50.5 25 7.5
LQ3E61-R1 ø19 26.5 24 32 74 70 67.5 37 16
ø25 8 18 30 26 41 78 49
LQ3E61-R2 ø12 24 22 24 74 64.5 62.5 29 9.5
L1, L1’

øB
B side
øM
2 Inch Size
C

A side B side
Model B C E1 E1’ E2 E2’ H1 H2 L1 L1’ L2 L2’ M1 M2 portMinsi.ze
Applicable tubing O.D.
C (E2, E2’) H2 LQ3E2A-R1 1/4" 1/8" 4 6 17 16 10 9 16 11 34.5 33.5 30.5 29.5 20 14 2
LQ3E3A-R1 1/4" 17 16 16 38 37 20 4
L2, L2’ 3/8" 5 9 22.5 19.5 21 47.5 44.5 25
LQ3E3A-R2 1/8" 10 9 11 33.5 32.5 14 2
LQ3E4A-R1 3/8" 22.5 19.5 21 48.5 45.5 25 6.4
1/2" 6 10 24.5 22.5 24 52.5 50.5 29
LQ3E4A-R2 1/4" 17 16 16 39 38 20 4
(E1,E1’,E2,E2’): Reference dimension for the
LQ3E5A-R1 1/2" 24.5 22.5 24 58.5 56.5 29 9.5
inserted tubing from the end
LQ3E5A-R2 3/4" 3/8" 7 14 26.5 24 22.5 19.5 32 21 64 61.5 53.5 50.5 37 25 6.4
surface of the nut
LQ3E5A-R3 1/4" 17 16 16 43.5 42.5 20 4
(E1’,E2’),L1’,L2’: Nut material PVDF dimensions
LQ3E6A-R1 3/4" 26.5 24 32 70 67.5 37 16
1" 8 18 30 26 41 78 74 49
LQ3E6A-R2 1/2" 24.5 22.5 24 64.5 62.5 29 9.5
A 926
LQ3 Series
Union Tee Reducing
How to Order

Tubing
connection
LQ3 T 2 A R1 LVC
LVA
Fitting type Nut material, packaging
Symbol Type Symbol Nut material Packaging LVH
T Union tee Nil PFA Clean packaging equivalent to Class M3.5
1 PFA Standard packaging equivalent to Class M5.5 LVD
2 PVDF Clean packaging equivalent to Class M3.5
Body size 3 PVDF Standard packaging equivalent to Class M5.5 LVQ
(according to the combination table)

Tubing type LVP


Type of piping (according to the combination table)
Symbol Type
A Inch
Symbol Type LVW
R Reducing
1, 2 Metric
LQ1
LQ3
Size combination (Metric) Size combination (Inch)
Size Model
A side (Left) B side (Center) C side (Right)
Size Model
A side (Left) B side (Center) C side (Right) LVN
Applicable tubing size (mm) Applicable tubing size (inch)

1
LQ3T11-R1
4x3
3x2 4x3
2
LQ3T2A-R1
1/4" x 5/32"
1/8" x 0.086" 1/4" x 5/32" LQHB
LQ3T11-R5 4x3 3x2 LQ3T2A-R5 1/4" x 5/32" 1/8" x 0.086"
TL
LQ3T21-R1 4x3 6x4 LQ3T3A-R1 1/4" x 5/32" 3/8" x 1/4" TIL
LQ3T21-R2 3x2 6x4 LQ3T3A-R2 1/8" x 0.086" 3/8" x 1/4"
2 6x4 3/8" x 1/4" TLM
LQ3T21-R5 6x4 4x3 3 LQ3T3A-R5 3/8" x 1/4" 1/4" x 5/32" TILM
LQ3T21-R6 6x4 3x2 LQ3T3A-R7 1/4" x 5/32" 1/4" x 5/32"
TD
LQ3T31-R1 8x6 10 x 8 LQ3T3A-R9 1/4" x 5/32" 3/8" x 1/4" 1/4" x 5/32" TID
LQ3T31-R2 6x4 10 x 8 LQ3T4A-R1 3/8" x 1/4" 1/2" x 3/8"
10 x 8 TH
LQ3T31-R5 10 x 8 8x6 LQ3T4A-R2 1/4" x 5/32" 1/2" x 3/8" TIH
3
LQ3T31-R6 10 x 8 6x4 LQ3T4A-R5 1/2" x 3/8" 3/8" x 1/4"
1/2" x 3/8"
LQ3T32-R1 6x4 8x6 4 LQ3T4A-R6 1/2" x 3/8" 1/4" x 5/32"
8x6
LQ3T32-R5 8x6 6x4 LQ3T4A-R7 3/8" x 1/4" 3/8" x 1/4"
LQ3T41-R1 10 x 8 12 x 10 LQ3T4A-R8 1/4" x 5/32" 1/4" x 5/32"
4 12 x 10
LQ3T41-R5 12 x 10 10 x 8 LQ3T4A-R9 3/8" x 1/4" 1/2" x 3/8" 3/8" x 1/4"
LQ3T51-R1 12 x 10 19 x 16 LQ3T5A-R1 1/2" x 3/8" 3/4" x 5/8"
5 19 x 16
LQ3T51-R5 19 x 16 12 x 10 LQ3T5A-R2 3/8" x 1/4" 3/4" x 5/8"
LQ3T61-R1 19 x 16 25 x 22 LQ3T5A-R3 1/4" x 5/32" 3/4" x 5/8"
6 25 x 22 3/4" x 5/8"
LQ3T61-R5 25 x 22 19 x 16 LQ3T5A-R5 3/4" x 5/8" 1/2" x 3/8"
Note) For details of the applicable tubing sizes, refer to page 945. LQ3T5A-R6 3/4" x 5/8" 3/8" x 1/4"
5
LQ3T5A-R7 1/2" x 3/8" 1/2" x 3/8"
B side LQ3T5A-R9 1/2" x 3/8" 3/4" x 5/8" 1/2" x 3/8"
LQ3T5A-R10 3/8" x 1/4" 3/4" x 5/8" 3/8" x 1/4"
LQ3T5A-R11 1/2" x 3/8" 1/4" x 5/32"
3/4" x 5/8"
LQ3T5A-R12 3/4" x 5/8" 1/4" x 5/32"
LQ3T6A-R1 3/4" x 5/8" 1" x 7/8"
LQ3T6A-R2 1/2" x 3/8" 1" x 7/8"
LQ3T6A-R3 3/8" x 1/4" 1" x 7/8"
A side C side LQ3T6A-R4 1" x 7/8" 1/4" x 5/32" 1" x 7/8"
LQ3T6A-R5 1" x 7/8" 3/4" x 5/8"
LQ3T6A-R6 1" x 7/8" 1/2" x 3/8"
6
LQ3T6A-R7 3/4" x 5/8" 3/4" x 5/8"
LQ3T6A-R9 3/4" x 5/8" 1" x 7/8" 3/4" x 5/8"
LQ3T6A-R10 1/2" x 3/8" 1" x 7/8" 1/2" x 3/8"
LQ3T6A-R12 1" x 7/8" 3/8" x 1/4"
1" x 7/8"
LQ3T6A-R13 1" x 7/8" 1/4" x 5/32"
LQ3T6A-R14 3/4" x 5/8" 1" x 7/8" 1/4" x 5/32"
Note) For details of the applicable tubing sizes, refer to page 945.
927
LQ3 Series

Dimensions
Union tee reducing: LQ3T-R

2
øM
H2
(E2, E2’)

B side
L2, L2’

2 x øB
øM1
øM3
F

1/4
A side C side
1/4
(E1,E1’,E2,E2’,E3,E3’): Reference dimension for the
H1 (E1, E1’) G (E3, E3’) H3 inserted tubing from the end
surface of the nut
L1, L1’ L3, L3’ (E1’,E2’,E3’),L1’,L2’,L3’: Nut material PVDF dimensions
Metric Size
A side (Left) B side (Center) C side (Right)
Model B E1 E1’ E2 E2’ E3 E3’ F G H1 H2 H3 L1 L1’ L2 L2’ L3 L3’ M1 M2 M3 portMinsi.ze
Applicable tubing O.D.
LQ3T11-R1 ø3 ø4
ø4 3.5 10 9 10 9 10 9 4.8 9.5 11 11 11 28.5 27.5 28.5 27.5 28.5 27.5 14 14 14 2
LQ3T11-R5 ø4 ø3
LQ3T21-R1 ø4 ø6 2.5
10 9 17 16 11 16 30.5 29.5 34.5 33.5 14 20
LQ3T21-R2 ø3 ø6 2
ø6 4 17 16 6 12 16 34.5 33.5 20
LQ3T21-R5 ø6 ø4 2.5
17 16 10 9 16 11 34.5 33.5 30.5 29.5 20 14
LQ3T21-R6 ø6 ø3 2
LQ3T31-R1 ø8 ø10 22.5 19.5 21 47.5 44.5 25 6.4
21 25
LQ3T31-R2 ø6 ø10 17 16 22.5 19.5 16 38 37 47.5 44.5 20 4
ø10 5 22.5 19.5 9 18 21 47.5 44.5 25
LQ3T31-R5 ø10 ø8 21 25 6.4
22.5 19.5 21 47.5 44.5 25
LQ3T31-R6 ø10 ø6 17 16 16 38 37 20
LQ3T32-R1 ø6 ø8 17 16 22.5 19.5 16 21 38 37 47.5 44.5 20 25 4
ø8 5 22.5 19.5 9 18 21 47.5 44.5 25
LQ3T32-R5 ø8 ø6 22.5 19.5 17 16 21 16 47.5 44.5 38 37 25 20
LQ3T41-R1 ø10 ø12 22.5 19.5 24 22 21 24 48.5 45.5 52.5 50.5 25 29
ø12 6 24 22 10 20 24 52.5 50.5 29 7.5
LQ3T41-R5 ø12 ø10 24 22 22.5 19.5 24 21 52.5 50.5 48.5 45.5 29 25
LQ3T51-R1 ø12 ø19 24 22 26.5 24 24 32 58.5 56.5 64 61.5 29 37
ø19 7 26.5 24 14 28 32 64 61.5 37 9.5
LQ3T51-R5 ø19 ø12 26.5 24 24 22 32 24 64 61.5 58.5 56.5 37 29
LQ3T61-R1 ø19 ø25 26.5 24 30 26 32 41 70 67.5 78 74 37 49
ø25 8 30 26 18 36 41 78 74 49 16
LQ3T61-R5 ø25 ø19 30 26 26.5 24 41 32 78 74 70 67.5 49 37
Inch Size
A side (Left) B side (Center) C side (Right)
Model B E1 E1’ E2 E2’ E3 E3’ F G H1 H2 H3 L1 L1’ L2 L2’ L3 L3’ M1 M2 M3 portMinsi.ze
Applicable tubing O.D.
LQ3T2A-R1 1/8" 1/4" 10 9 17 16 11 16 30.5 29.5 34.5 33.5 14 20
1/4" 4 17 16 6 12 16 34.5 33.5 20 2
LQ3T2A-R5 1/4" 1/8" 17 16 10 9 16 11 34.5 33.5 30.5 29.5 20 14
LQ3T3A-R1 1/4" 3/8" 17 16 16 38 37 20 4
22.5 19.5 21 47.5 44.5 25
LQ3T3A-R2 1/8" 3/8" 10 9 11 33.5 32.5 14 2
3/8" 22.5 19.5 21 47.5 44.5 25
LQ3T3A-R5 3/8" 1/4" 5 22.5 19.5 9 18 21 47.5 44.5 25
LQ3T3A-R7 1/4" 1/4" 17 16 17 16 16 16 38 37 38 37 20 20 4
LQ3T3A-R9 1/4" 3/8" 1/4" 17 16 22.5 19.5 16 21 38 37 47.5 44.5 20 25
LQ3T4A-R1 3/8" 1/2" 22.5 19.5 21 48.5 45.5 25 6.4
24.5 22.5 24 52.5 50.5 29
LQ3T4A-R2 1/4" 1/2" 17 16 16 39 38 20 4
LQ3T4A-R5 1/2" 3/8" 22.5 19.5 21 48.5 45.5 25 6.4
1/2" 24.5 22.5 24.5 22.5 24 24 52.5 50.5 52.5 50.5 29 29
LQ3T4A-R6 1/2" 1/4" 6 17 16 10 20 16 39 38 20 4
LQ3T4A-R7 3/8" 3/8" 22.5 19.5 22.5 19.5 21 21 48.5 45.5 48.5 45.5 25 25 6.4
LQ3T4A-R8 1/4" 1/4" 17 16 17 16 16 16 39 38 39 38 20 20 4
LQ3T4A-R9 3/8" 1/2" 3/8" 22.5 19.5 24.5 22.5 22.5 19.5 21 24 21 48.5 45.5 52.5 50.5 48.5 45.5 25 29 25 6.4
LQ3T5A-R1 1/2" 3/4" 24.5 22.5 24 58.5 56.5 29 9.5
LQ3T5A-R2 3/8" 3/4" 22.5 19.5 26.5 24 21 32 54.5 51.5 64 61.5 25 37 6.4
LQ3T5A-R3 1/4" 3/4" 17 16 16 44.5 43.5 20 4
3/4" 26.5 24 32 64 61.5 37
LQ3T5A-R5 3/4" 1/2" 24.5 22.5 24 58.5 56.5 29 9.5
26.5 24 32 64 61.5 37
LQ3T5A-R6 3/4" 3/8" 22.5 19.5 21 54.5 51.5 25 6.4
7 14 28
LQ3T5A-R7 1/2" 1/2" 24.5 22.5 24 58.5 56.5 29
24.5 22.5 24 58.5 56.5 29 9.5
LQ3T5A-R9 1/2" 3/4" 1/2" 24.5 22.5 24 58.5 56.5 29
26.5 24 32 64 61.5 37
LQ3T5A-R10 3/8" 3/4" 3/8" 22.5 19.5 22.5 19.5 21 21 54.5 51.5 54.5 51.5 25 25 6.4
LQ3T5A-R11 1/2" 1/4" 24.5 22.5 24 58.5 56.5 29
3/4" 26.5 24 17 16 32 16 64 61.5 44.5 43.5 37 20 4
LQ3T5A-R12 3/4" 1/4" 26.5 24 32 64 61.5 37
LQ3T6A-R1 3/4" 1" 26.5 24 32 70 67.5 37 16
LQ3T6A-R2 1/2" 1" 24.5 22.5 24 64.5 62.5 29 9.5
30 26 41 78 74 49
LQ3T6A-R3 3/8" 1" 22.5 19.5 21 60 57 25 6.4
LQ3T6A-R4 1" 1/4" 1" 30 26 17 16 41 16 78 74 50 49 49 20 4
LQ3T6A-R5 1" 3/4" 30 26 26.5 24 32 70 67.5 37 16
41 78 74 49
LQ3T6A-R6 1" 1/2" 30 26 24.5 22.5 24 64.5 62.5 29 9.5
8 18 36
LQ3T6A-R7 3/4" 3/4" 26.5 24 32 70 67.5 37
26.5 24 32 70 67.5 37 16
LQ3T6A-R9 3/4" 1" 3/4" 26.5 24 32 70 67.5 37
LQ3T6A-R10 1/2" 1" 1/2" 24.5 22.5 24.5 22.5 24 24 64.5 62.5 64.5 62.5 29 29 9.5
LQ3T6A-R12 1" 3/8" 30 26 22.5 19.5 41 21 78 74 60 57 49 25 6.4
1" 30 26 41 78 74 49
LQ3T6A-R13 1" 1/4"
17 16 16 50 49 20 4
LQ3T6A-R14 3/4" 1" 1/4" 26.5 24 32 70 67.5 37
A 928
LQ3 Series
Space Saving Union Elbow
How to Order

Tubing
connection
LQ3 E 21 S LVC
LVA
Fitting type Nut material, packaging
Symbol Type Symbol Nut material Packaging LVH
E Union elbow Nil PFA Clean packaging equivalent to Class M3.5
1 PFA Standard packaging equivalent to Class M5.5 LVD
2 PVDF Clean packaging equivalent to Class M3.5
3 PVDF Standard packaging equivalent to Class M5.5 LVQ
LVP
Thread type
Symbol Type LVW
S Space saving
LQ1
Size combination LQ3
Size No. Applicable tubing size (mm) Size Symbol Applicable tubing size (inch)
2 1 6x4 2 A 1/4" x 5/32" LVN
3 1 10 x 8 3 A 3/8" x 1/4"
3 2 8x6 4 A 1/2" x 3/8" LQHB
4 1 12 x 10 5 A 3/4" x 5/8"
19 x 16 1" x 7/8"
TL
5 1 6 A TIL
6 1 25 x 22 7 A 1 1/4" x 1.1"
TLM
Note) For details of the applicable tubing Note) For details of the applicable tubing TILM
sizes, refer to page 945. sizes, refer to page 945.
TD
TID
TH
Dimensions TIH

Space saving union elbow: LQ3E-S

Metric Size
Applicable Min.
(L2, L2’)

øB Model tubing B C E E’ H L1 L1’ L2 L2’ M port


O.D. size
øM
LQ3E21-S ø6 4 6 17 16 16 34.5 33.5 39.5 38.5 20 3.9
C

1/4 LQ3E31-S ø10 52.5 49.5 7.5


5 9 22.5 19.5 21 47.5 44.5 25
LQ3E32-S ø8 49.5 46.5 6.3
C (E, E’) H
LQ3E41-S ø12 6 10 24 22 24 52.5 50.5 54.5 52.5 29 9.5
L1, L1’ LQ3E51-S ø19 7 14 26.5 24 32 64 61.5 66 63.5 37 15.8
LQ3E61-S ø25 8 18 30 26 41 78 74 80 76 49 22

(E,E’): Reference dimension for the Inch Size


inserted tubing from the end Applicable Min.
surface of the nut Model tubing B C E E’ H L1 L1’ L2 L2’ M port
(E’),L1’,L2’: Nut material PVDF dimensions O.D. size
LQ3E2A-S 1/4" 4 6 17 16 16 34.5 33.5 39.5 38.5 20 3.9
øM LQ3E3A-S 3/8" 5 9 22.5 19.5 21 47.5 44.5 49.5 46.5 25 6.3
LQ3E4A-S 1/2" 6 10 24.5 22.5 24 52.5 50.5 54.5 52.5 29 9.5
H

LQ3E5A-S 3/4" 7 14 26.5 24 32 64 61.5 66 63.5 37 15.8


LQ3E6A-S 1" 8 18 30 26 41 78 74 80 76 49 22
LQ3E7A-S 1 1/4" 9 22 35 35 50 92.5 92.5 97.5 97.5 64 28

Class 7

929 A
LQ3 Series
Space Saving Branch Tee
How to Order

Tubing
connection
LQ3 T 21 S B
Nut material, packaging
Fitting type
Symbol Nut material Packaging
Symbol Type
Nil PFA Clean packaging equivalent to Class M3.5
T Union tee
1 PFA Standard packaging equivalent to Class M5.5
2 PVDF Clean packaging equivalent to Class M3.5
3 PVDF Standard packaging equivalent to Class M5.5

Thread type
Symbol Type
B Branch tee

Tubing type
Symbol Type
S Space saving

Size combination
Size No. Applicable tubing size (mm) Size Symbol Applicable tubing size (inch)
2 1 6x4 2 A 1/4" x 5/32"
3 1 10 x 8 3 A 3/8" x 1/4"
3 2 8x6 4 A 1/2" x 3/8"
4 1 12 x 10 5 A 3/4" x 5/8"
5 1 19 x 16 6 A 1" x 7/8"
6 1 25 x 22 Note) For details of the applicable tubing
Note) For details of the applicable tubing sizes, refer to page 945.
sizes, refer to page 945.

Dimensions
Space saving branch tee: LQ3T-SB

Metric Size
(L2, L2’)

2 x øB Applicable Min.
Model tubing B E E’ F G H L1 L1’ L2 L2’ M port
øM O.D. size
F

1/4
LQ3T21-SB ø6 4 17 16 6 12 16 34.5 33.5 39.5 38.5 20 3.9
LQ3T31-SB ø10 52.5 49.5 7.5
(E, E’) G (E, E’) H 5 22.5 19.5 9 18 21 47.5 44.5 25
LQ3T32-SB ø8 49.5 46.5 6.3
L1, L1’ L1, L1’ LQ3T41-SB ø12 6 24 22 10 20 24 52.5 50.5 54.5 52.5 29 9.5
LQ3T51-SB ø19 7 26.5 24 14 28 32 64 61.5 66 63.5 37 15.8
LQ3T61-SB ø25 8 30 26 18 36 41 78 74 80 76 49 22
(E,E’): Reference dimension for the
inserted tubing from the end Inch Size
surface of the nut
(E’),L1’,L2’: Nut material PVDF dimensions
Applicable Min.
Model tubing B E E’ F G H L1 L1’ L2 L2’ M port
O.D. size
LQ3T2A-SB 1/4" 4 17 16 6 12 16 34.5 33.5 39.5 38.5 20 3.9
LQ3T3A-SB 3/8" 5 22.5 19.5 9 18 21 47.5 44.5 49.5 46.5 25 6.3
LQ3T4A-SB 1/2" 6 24.5 22.5 10 20 24 52.5 50.5 54.5 52.5 29 9.5
LQ3T5A-SB 3/4" 7 26.5 24 14 28 32 64 61.5 66 63.5 37 15.8
LQ3T6A-SB 1" 8 30 26 18 36 41 78 74 80 76 49 22

A 930
LQ3 Series
Space Saving Run Tee
How to Order

Tubing
connection
LQ3 T 21 SR LVC
Nut material, packaging LVA
Fitting type Symbol Nut material Packaging
Symbol Type Nil PFA Clean packaging equivalent to Class M3.5 LVH
T Union tee 1 PFA Standard packaging equivalent to Class M5.5
2 PVDF Clean packaging equivalent to Class M3.5 LVD
3 PVDF Standard packaging equivalent to Class M5.5
LVQ
Thread type
Symbol Type LVP
R Run tee
LVW

Tubing type
LQ1
Symbol Type
S Space saving
LQ3
LVN
Size combination
Size No. Applicable tubing size (mm) Size Symbol Applicable tubing size (inch)
LQHB
2 1 6x4 2 A 1/4" x 5/32" TL
3 1 10 x 8 3 A 3/8" x 1/4" TIL
3 2 8x6 4 A 1/2" x 3/8" TLM
4 1 12 x 10 5 A 3/4" x 5/8" TILM
5 1 19 x 16 6 A 1" x 7/8" TD
6 1 25 x 22 Note) For details of the applicable tubing TID
Note) For details of the applicable tubing sizes, refer to page 945. TH
sizes, refer to page 945. TIH

Dimensions
Space saving run tee: LQ3T-SR

Metric Size
(E, E’)

Applicable Min.
2 x øB Model tubing B E E’ F G H L1 L1’ L2 L2’ M port
O.D. size
L1, L1’

LQ3T21-SR ø6 4 17 16 6 12 16 34.5 33.5 39.5 38.5 20 3.9


øM
LQ3T31-SR ø10 52.5 49.5 7.5
F

5 22.5 19.5 9 18 21 47.5 44.5 25


1/4 LQ3T32-SR ø8 49.5 46.5 6.3
G (E, E’) H LQ3T41-SR ø12 6 24 22 10 20 24 52.5 50.5 54.5 52.5 29 9.5
LQ3T51-SR ø19 7 26.5 24 14 28 32 64 61.5 66 63.5 37 15.8
L2, L2’ L1, L1’ LQ3T61-SR ø25 8 30 26 18 36 41 78 74 80 76 49 22

Inch Size
(E,E’): Reference dimension for the Applicable Min.
inserted tubing from the end Model tubing B E E’ F G H L1 L1’ L2 L2’ M port
surface of the nut O.D. size
(E’),L1’,L2’: Nut material PVDF dimensions
LQ3T2A-SR 1/4" 4 17 16 6 12 16 34.5 33.5 39.5 38.5 20 3.9
LQ3T3A-SR 3/8" 5 22.5 19.5 9 18 21 47.5 44.5 49.5 46.5 25 6.3
LQ3T4A-SR 1/2" 6 24.5 22.5 10 20 24 52.5 50.5 54.5 52.5 29 9.5
LQ3T5A-SR 3/4" 7 26.5 24 14 28 32 64 61.5 66 63.5 37 15.8
LQ3T6A-SR 1" 8 30 26 18 36 41 78 74 80 76 49 22

931 A
LQ3 Series
Tubing Extension
Straight Connector
How to Order

Tubing
connection
LQ3 H 2A T
Nut material, packaging
Fitting type
Symbol Nut material Packaging
Symbol Type
Nil PFA Clean packaging equivalent to Class M3.5
H Connector
1 PFA Standard packaging equivalent to Class M5.5
2 PVDF Clean packaging equivalent to Class M3.5
3 PVDF Standard packaging equivalent to Class M5.5

Thread type
Symbol Type
T Tubing extension

Size combination
Size No. Applicable tubing size (mm) Size Symbol Applicable tubing size (inch)
2 1 6x4 2 A 1/4" x 5/32"
3 1 10 x 8 3 A 3/8" x 1/4"
3 2 8x6 4 A 1/2" x 3/8"
4 1 12 x 10 5 A 3/4" x 5/8"
5 1 19 x 16 6 A 1" x 7/8"
6 1 25 x 22 7 A 1 1/4" x 1.1"
Note) For details of the applicable tubing Note) For details of the applicable tubing
sizes, refer to page 945. sizes, refer to page 945.

Dimensions
Tubing extension straight connector: LQ3H-T

H Metric Size
W Applicable Min.
øM Model tubing D E E’ H L1 L1’ L2 M port W
O.D. size
D

1/4
LQ3H21-T ø6 ø6 17 16 16 53 51.5 18 20 3.9 14
LQ3H31-T ø10 ø10 7.5
L2 (E, E’) 22.5 19.5 21 67.5 64.5 22.5 25 18
LQ3H32-T ø8 ø8 6
L1, L1’ LQ3H41-T ø12 ø12 24 22 24 74 72 24 29 9.5 22
LQ3H51-T ø19 ø19 26.5 24 32 83.5 81 26.5 37 15.8 30
LQ3H61-T ø25 ø25 30 26 41 97.5 93.5 31 49 22 36

(E,E’): Reference dimension for the inserted


tubing from the end surface of the nut
Inch Size
(E’),L’: Nut material PVDF dimensions Applicable Min.
W: Width across flats dimension Model tubing D E E’ H L1 L1’ L2 M port W
O.D. size
LQ3H2A-T 1/4" 1/4" 17 16 16 53 51.5 18 20 3.9 14
øM
LQ3H3A-T 3/8" 3/8" 22.5 19.5 21 65.5 62.5 23.5 25 6.3 18
H

LQ3H4A-T 1/2" 1/2" 24.5 22.5 24 72 70 25 29 9.5 22


LQ3H5A-T 3/4" 3/4" 26.5 24 32 83.5 81 26.5 37 15.8 30
LQ3H6A-T 1" 1" 30 26 41 97.5 93.5 31 49 22 36
LQ3H7A-T 1 1/4" 1 1/4" 35 35 50 120.5 120.5 41.5 64 28 46
Class 7

A 932
LQ3 Series
Straight Adapter
How to Order

Tubing
connection
LQ3 A 21 LVC
LVA
Fitting type Nut material, packaging
Symbol Type Symbol Nut material Packaging LVH
A Straight adapter Nil PFA Clean packaging equivalent to Class M3.5
1 PFA Standard packaging equivalent to Class M5.5 LVD
2 PVDF Clean packaging equivalent to Class M3.5
3 PVDF Standard packaging equivalent to Class M5.5 LVQ
LVP
Size combination
Size No. Applicable tubing size (mm) Applicable piping size Size Symbol Applicable tubing size (inch) Applicable piping size LVW
2 1 ø13.7 x ø9 2 A ø13.7 x ø9
2 2 ø21.3 x ø15.4 2 B ø21.3 x ø15.4 LQ1
2 3 6x4 ø26.7 x ø20.5 2 C 1/4" x 5/32" ø26.7 x ø20.5
2 4 ø33.4 x ø26.3 2 D ø33.4 x ø26.3 LQ3
2 5 ø60.3 x ø52.5 2 E ø60.3 x ø52.5
3 2 ø13.7 x ø9 3 A ø13.7 x ø9 LVN
3 4 8x6 ø21.3 x ø15.4 3 B 3/8" x 1/4" ø21.3 x ø15.4
3 6 ø26.7 x ø20.5 3 C ø26.7 x ø20.5 LQHB
3 7 10 x 8 4 A ø21.3 x ø15.4
ø33.4 x ø26.3 TL
3 8 8x6 4 B ø26.7 x ø20.5
1/2" x 3/8" TIL
4 1 ø21.3 x ø15.4 4 C ø33.4 x ø26.3
4 2 ø26.7 x ø20.5 4 D ø60.3 x ø52.5 TLM
12 x 10 TILM
4 3 ø33.4 x ø26.3 5 A ø21.3 x ø15.4
4 4 ø60.3 x ø52.5 5 B 3/4" x 5/8" ø26.7 x ø20.5 TD
TID
5 1 ø21.3 x ø15.4 5 C ø33.4 x ø26.3
5 2 19 x 16 ø26.7 x ø20.5 6 A ø26.7 x ø20.5 TH
TIH
5 3 ø33.4 x ø26.3 6 B 1" x 3/4" ø33.4 x ø26.3
6 1 ø26.7 x ø20.5 6 C ø60.3 x ø52.5
6 2 25 x 22 ø33.4 x ø26.3 7 A 1 1/4" x 1.1" ø33.4 x ø26.3
6 3 ø60.3 x ø52.5 Note) For details of the applicable tubing sizes, refer to page 945.
Note) For details of the applicable tubing sizes, refer to page 945.

933
LQ3 Series

Dimensions
Straight Adapter: LQ3A

W Metric Size
M Min.
Model E E’ H L1 L1’ L2 L2’ M P Q W
port size
øQ
øP

LQ3A21 46 44.5 13.7 9


(E, E’) H LQ3A22 32 30.5 21.3 15.4
58 56.5
L1, L1’ LQ3A23 17 16 16 20 4 26.7 20.5 14
L2, L2’ LQ3A24 70.5 69 33.4 26.3
32.5 31
LQ3A25 74.5 73 60.3 52.5
LQ3A32 54 53 13.7 9
LQ3A34 40 39 66 6.4 21.3 15.4
(E,E’): Reference dimension for the inserted 22.5 19.5 21 65 25 18
LQ3A36 66 26.7 20.5
tubing from the end surface of the nut
LQ3A37 44 41 82 79 7.5 33.4 26.3
(E’),L1’,L2’: Nut material PVDF dimensions
W: Width across flats dimension LQ3A41 21.3 15.4
LQ3A42 47 45 80 78 26.7 20.5
24 22 24 29 9.5 22
LQ3A43 33.4 26.3
LQ3A44 49 47 88 86 60.3 52.5
LQ3A51 15.4 21.3 15.4
LQ3A52 26.5 24 32 57 54.5 95 92.5 37 26.7 20.5 30
16
LQ3A53 33.4 26.3
LQ3A61 20.5 26.7 20.5
66.5 62.5 104.5 100.5
LQ3A62 30 26 41 49 33.4 26.3 36
22
LQ3A63 68.5 64.5 107.5 103.5 60.3 52.5

Inch Size
Min.
Model E E’ H L1 L1’ L2 L2’ M P Q W
port size
LQ3A2A 46 44.5 13.7 9
LQ3A2B 32 30.5 21.3 15.4
58 56.5
LQ3A2C 17 16 16 20 4 26.7 20.5 14
LQ3A2D 70.5 69 33.4 26.3
32.5 31
LQ3A2E 74.5 73 60.3 52.5
LQ3A3A 56 53 13.7 9
LQ3A3B 22.5 19.5 21 40 39 25 6.4 21.3 15.4 18
66 65
LQ3A3C 26.7 20.5
LQ3A4A 21.3 15.4
LQ3A4B 47 45 80 78 26.7 20.5
24.5 22.5 24 29 9.5 22
LQ3A4C 33.4 26.3
LQ3A4D 49 47 88 86 60.3 52.5
LQ3A5A 15.4 21.3 15.4
LQ3A5B 26.5 24 32 57 54.5 95 92.5 37 26.7 20.5 30
16
LQ3A5C 33.4 26.3
LQ3A6A 20.5 26.7 20.5
66.5 62.5 104.5 100.5
LQ3A6B 30 26 41 49 33.4 26.3 36
22
LQ3A6C 68.5 64.5 107.5 103.5 60.3 52.5
LQ3A7A 35 35 50 79 79 117 117 64 26.3 33.4 26.3 46

B 934
LQ3 Series
Union Flange
How to Order

Tubing
connection
LQ3 F 22 LVC
LVA
Fitting type Nut material, packaging
Symbol Type Symbol Nut material Packaging LVH
F Union flange Nil PFA Clean packaging equivalent to Class M3.5
1 PFA Standard packaging equivalent to Class M5.5 LVD
2 PVDF Clean packaging equivalent to Class M3.5
3 PVDF Standard packaging equivalent to Class M5.5 LVQ
Size combination
Size No. Applicable tubing size (mm) Applicable flange size Size Symbol Applicable tubing size (inch) Applicable flange size
LVP
2 2 6x4 10K-20A 2 B 1/4" x 5/32" 10K-20A
4 2 10K-20A 4 B 10K-20A
LVW
12 x 10 1/2" x 3/8"
4 3 10K-25A 4 C 10K-25A
5 1 10K-15A 5 A 10K-15A
LQ1
5 2 19 x 16 10K-20A 5 B 3/4" x 5/8" 10K-20A
5 3 10K-25A 5 C 10K-25A
LQ3
6 2 10K-20A 6 B 10K-20A
6 3 25 x 22 10K-25A 6 C 1" x 7/8" 10K-25A
LVN
6 4 10K-40A 6 D 10K-40A
LQHB
Note) For details of the applicable tubing sizes, refer to page 945. Note) For details of the applicable tubing sizes, refer to page 945.
TL
TIL
Dimensions TLM
TILM
Union Flange: LQ3F TD
TID
TH
TIH
(S) Metric Size
Min.
Model E E’ H L1 L1’ L2 L2’ M P Q R S T W N
port size
W LQ3F22 17 16 16 32.1 30.9 56.1 54.9 20 58 42 43 14 10 14 4 4
M LQ3F42 58
24 22 24 49 46.8 73 70.8 29 42 43 14 10 22 9.5 9.5
(øR)

LQ3F43 69
øQ
øP

øN

LQ3F51 80 77.3 53 12
LQ3F52 26.5 24 32 58 55.3 37 58 42 43 10 30 16 16
(E, E’) 82 79.3 14
LQ3F53 69
T L1, L1’ H
LQ3F62 58 47 48
L2, L2’
92.5 88.2
LQ3F63 30 26 41 68.5 64.2 49 69 16 10 36 22 22
55 56
LQ3F64 94.5 90.2 84
(E,E’): Reference dimension for the inserted
tubing from the end surface of the nut Inch Size
(E’),L1’,L2’: Nut material PVDF dimensions
W: Width across flats dimension Min.
Model E E’ H L1 L1’ L2 L2’ M P Q R S T W N
(R): I.D. of JIS flange necessary to mount port size
this product. (Additional modification LQ3F2B 17 16 16 32.1 30.9 56.1 54.9 20 58 42 43 14 10 14 4 4
is needed.) LQ3F4B 58
JIS flange is not included in the 24.5 22.5 24 49 46.8 73 70.8 29 42 43 14 10 22 9.5 9.5
LQ3F4C 69
product. LQ3F5A 80 77.3 53 12
LQ3F5B 26.5 24 32 58 55.3 37 58 42 43 10 30 16 16
82 79.3 14
LQ3F5C 69
LQ3F6B 58 47 48
92.5 88.2
LQ3F6C 30 26 41 68.5 64.2 49 69 16 10 36 22 22
55 56
LQ3F6D 94.5 90.2 84

935 A
LQ3 Series

How to Order Space Saving Type Fittings


This product, for use with products with one nut attached (insert bushing) has one nut removed.

LQ3 E 6A SN
Packaging
Fitting type
Symbol Packaging
E T
Nil Clean packaging equivalent to Class M3.5
Union Elbow Union Tee 1 Standard packaging equivalent to Class M5.5

Without a nut (including insert bushing) in one part

Applicable tubing size


Symbol Applicable tubing Symbol Applicable tubing
P U Size No. size (mm) size (inch)
Size No.
Panel Mount Union Union
2 1 6x4 2 A 1/4" x 5/32"
3 1 10 x 8 3 A 3/8" x 1/4"
3 2 8x6 4 A 1/2" x 3/8"
4 1 12 x 10 5 A 3/4" x 5/8"
5 1 19 x 16 6 A 1" x 7/8"
6 1 25 x 22
Note 1) Please choose the same size fitting as the fitting of the
connecting product.
Note 2) For details of applicable tubing sizes, refer to page 945.

Connection example

936
Fluoropolymer Fittings
Hyper Fittings / Flare Type LQ3 Series

Options
Blanking plug

LQ3 1 P 03 1
Size Packaging LVC
Symbol Size Thread type Symbol Packaging Used to block
1 1 Symbol Type Nil Clean packaging equivalent to Class M3.5 fittings which are LVA
2 2 1 Male 1 Standard packaging equivalent to Class M5.5 not being used.
3 3 LVH
4 4 Applicable tubing size
Metric Size Inch Size
5 5
Symbol Applicable tubing size Size Symbol Applicable tubing size Size
LVD
6 6
7 7 03 ø3 x ø2 03 1/8" x 0.086" 1
04 ø4 x ø3
1
07 1/4" x 5/32" 2 LVQ
Fitting type 06 ø6 x ø4 2 11 3/8" x 1/4" 3
Symbol Type 08 ø8 x ø6
3
13 1/2" x 3/8" 4 LVP
P Plug 10 ø10 x ø8 19 3/4" x 5/8" 5
12 ø12 x ø10 4 25 1" x 7/8" 6 LVW
19 ø19 x ø16 5 32 1 1/4" x 1.1" 7
25 ø25 x ø22 6
LQ1
Note) For details of the applicable tubing sizes, refer to page 945.
Tubing plug LQ3
LQ3 1 P 03 2 LVN
Size Nut material, packaging
Symbol Nut material Packaging LQHB
Symbol Size
1 1 Nil PFA Clean packaging equivalent to Class M3.5 Used to block TL
2 2 Type of piping 1 PFA Standard packaging equivalent to Class M5.5 tubing which are TIL
3 3 Symbol Type 2 PVDF Clean packaging equivalent to Class M3.5 not being used.
2 Tubing 3 PVDF Standard packaging equivalent to Class M5.5
TLM
4 4 TILM
5 5
6 6 Applicable tubing size TD
Metric Size Inch Size TID
Fitting type Symbol Applicable tubing size Size Symbol Applicable tubing size Size TH
Symbol Type 03 ø3 x ø2 03 1/8" x 0.086" 1 TIH
1
P Plug 04 ø4 x ø3 07 1/4" x 5/32" 2
06 ø6 x ø4 2 11 3/8" x 1/4" 3
08 ø8 x ø6 13 1/2" x 3/8" 4
3
10 ø10 x ø8 19 3/4" x 5/8" 5
12 ø12 x ø10 4 25 1" x 7/8" 6
19 ø19 x ø16 5
25 ø25 x ø22 6
Note) For details of the applicable tubing sizes, refer to page 945.
Nut

LQ3 1 N 03
Size Nut material, packaging
Symbol Size Symbol Nut material Packaging
1 1 Nil PFA Clean packaging equivalent to Class M3.5
2 2 1 PFA Standard packaging equivalent to Class M5.5
3 3 2 PVDF Clean packaging equivalent to Class M3.5
4 4 3 PVDF Standard packaging equivalent to Class M5.5
5 5
6 6 Applicable tubing size
7 7 Metric Size Inch Size
Symbol Applicable tubing size Size Symbol Applicable tubing size Size
Fitting type 03 ø3 x ø2 03 1/8" x 0.086" 1
1
Symbol Type 04 ø4 x ø3 07 1/4" x 5/32" 2
N Nut 06 ø6 x ø4 2 11 3/8" x 1/4" 3
08 ø8 x ø6 13 1/2" x 3/8" 4
3
10 ø10 x ø8 19 3/4" x 5/8" 5
12 ø12 x ø10 4 25 1" x 7/8" 6
19 ø19 x ø16 5 32 1 1/4" x 1.1" 7
25 ø25 x ø22 6
Note) For details of the applicable tubing sizes, refer to page 945.
937
High Purity Fluoropolymer Needle Valve

LVN Series RoHS

How to Order

LVN 2 0 S 07
Body class Port B (OUT) different dia. size
Symbol Body class Orifice dia. Symbol Application
2 2 ø4.4 Nil Port A & B same size
3 3 ø8 Refer to the applicable Different diameter tubing can be selected
4 4 ø10 tubing table to the left. within the same body class.

LQ2 fittings

A port (IN)
Applicable tubing size
Body class
Symbol Connecting tubing
O.D. 2 3 4
Metric sizes
04 4x3 
06 6x4  
08 8x6 
Symbol 10 10 x 8  
B A 12 12 x 10 
Inch sizes
03 1/8" x 0.086" 
05 3/16" x 1/8" 
07 1/4" x 5/32"  
11 3/8" x 1/4"  
13 1/2" x 3/8" 
 Basic size  With reducer
Note 1) Applicable fittings: LQ2
Note 2) For details of the applicable tubing Different diameter tubing order example
sizes, refer to page 945.

Different diameter tubing (with plug-in reducer) can be


selected within the same body class.
(Example) Body class 3
A side: ø10 x ø8
B side: ø8 x ø6
Order as shown below.
A
SMC

LVN30 S 10 08 B

Different dia. tubing size


(B side)
Applicable tubing size (A side)

938
High Purity Fluoropolymer Needle Valve LVN Series

Standard Specifications

Model LVN20 LVN30 LVN40


Metric size 4, 6 6, 8, 10 10, 12
Tubing O.D. Note)
Inch size 1/8", 3/16", 1/4" 1/4", 3/8" 3/8", 1/2"
Orifice diameter ø4.4 ø8 ø10 LVC
Flow rate Av x Kv 0.4 1.2 1.8
characteristics Cv 0.5 1.4 2.2 LVA
Withstand pressure (MPa) 1
Operating pressure (MPa) 0 to 0.5 LVH
Fluid temperature (°C) 5 to 90
Ambient temperature (°C) 0 to 60
LVD
Weight (kg) 0.055 0.115 0.185 LVQ
Note) For details of the applicable tubing sizes, refer to page 945.
LVP
Different Diameter Tubing Applicable with Reducer
Specific Product Precautions LVW
Different diameter tubing can be selected (within a body class) by using a nut and
insert bushing (reducer). Applicable fitting: LQ2 LQ1
Be sure to read this before handling
the products. Refer to back page 50 LQ3
Tubing O.D.
for Safety Instructions. Body Metric sizes Inch sizes
class
4 6 8 10 12 1/8" 3/16" 1/4" 3/8" 1/2" LVN
Piping
2     
LQHB
Caution 3     
TL
1. Connect tubing with special tools. 4    
TIL
Refer to the pamphlet “High-Purity Fluoropo- Note) Refer to page 910 for information on changing  Basic size  With reducer
tubing sizes. TLM
lymer Fittings Hyper Fitting/LQ1, 2 Series TILM
Work Procedure Instructions” (M-E05-1) for TD
connecting tubing and special tools. Flow Rate Characteristics (Fluid: Water) TID
(Downloadable from our web site.) TH
TIH
LVN20 LVN30
4.5 8
4 7
3.5 Differential pressure Differential pressure
Flow rate (L/min) Note)

Flow rate (L/min) Note)

6 ∆P0.05MPa
∆P0.05MPa
3
5 ∆P0.03MPa
2.5
4
2 ∆P0.03MPa
3
1.5
2. Tighten the nut until it touches the 1 2
end surface of the body, and then 0.5 ∆P0.01MPa 1 ∆P0.01MPa
tighten it an additional 1/8 turn. If 0 0
the nut won’t turn any further, then 0 2 4 6 8 10 0 2 4 6 8 10
it means a sufficient tightening has Number of needle rotations Number of needle rotations
occurred. Refer to the proper
tightening torques shown below. LVN40
14
Tightening torque for piping
Body class Torque (N.m) 12
Differential pressure
Flow rate (L/min) Note)

2 1.5 to 2.0 10 ∆P0.05MPa


3 3.0 to 3.5 ∆P0.03MPa
4 7.5 to 9.0 8

4
Note) As the LVN series cannot be used as
2 ∆P0.01MPa a stop valve, it is not possible to set
the flow rate to 0 when the number of
0 needle rotations is set to 0. For further
0 2 4 6 8 10 details, refer to the “Operating Precau-
Number of needle rotations tions.”
939 B
LVN Series

Construction
t
With reducer
r
i
w
e
q

y u Part lists
No. Description Material
A 1 Body PFA
Body class 2 2 Needle PCTFE
3 V seal PTFE
y 4 Lock nut PVDF
u 5 Adjustment handle PVDF
6 Insert bushing PFA
y 7 Nut PFA
B u 8 Collar PFA

Dimensions
A
(B)

(max.S)

øH

Port A

øG
2x
D

SMC
(J)
SMC
C

F K
Port B
E

Model A B C D E F G H J K S
LVN20 48 24 12 88 34.5 6 4 14 20 18 2.4
LVN30 60 30 18 110 43 9 5 25 26 24 7.5
LVN40 72 36 22 124 52 11 6 25 33 30 8.0
940
Fluoropolymer Bore Through Connector

LQHB Series RoHS

LVC
How to Order LVA
LVH
Tubing
connection
LQHB 07
LVD
Nut material, packaging
Fitting type Symbol Nut material Packaging LVQ
Symbol Type Nil PFA Clean packaging equivalent to Class M3.5
HB Bore through connector 1 PFA Standard packaging equivalent to Class M5.5 LVP
Thread type LVW
Symbol Type
Nil R LQ1
N NPT

Size combination
LQ3
Applicable tubing Tubing Applicable tubing Tubing
Symbol Size
size (mm) O.D.
Symbol Size
size (inch) O.D.
LVN
03 3x2 03 1 1/8" x 0.086" 1/8"
04
1
4x3
1/8"
07 2 1/4" x 5/32" 1/4"
LQHB
06 2 6x4 1/4" 11 3 3/8" x 1/4" 3/8" TL
08 8x6 13 4 1/2" x 3/8" 1/2" TIL
3 3/8"
10 10 x 8 19 5 3/4" x 5/8" 3/4" TLM
12 4 12 x 10 1/2" 25 6 1" x 7/8" 1" TILM
19 5 19 x 16 3/4" TD
25 6 25 x 22 1" TID
Note) For details of the applicable tubing sizes, refer to page 945. TH
TIH
Specifications
Piping
Maximum operating pressure (at 20°C)
Operating temperature
1.0 MPa ( Refer to Note 1)
0 to 200°C (Refer to Note 1)
Caution
1. As with the nut tightening, refer to the tightening torques
Applicable tube diameter Please refer to the Combination Chart. below as a guide.
Tightening torque for piping
Body size Torque (N.m)
Precautions 1 0.7 to 0.9
1. The operating pressure or operating temperature range for 2 1.6 to 1.8
each tubing size differs depending on the usage conditions. 3 3.2 to 3.5
Keep the supplied fluid pressure and temperature within the 4 5.0 to 5.3
5 10.0 to 10.5
range of each specification.
6 22.5 to 23.0
2. The piping should be arranged in such a way that no extraction
force other than the fluid pressure should be added to the tub- 2. Tightening
ing. After tightening the nut by hand, use the nut tightening
3. Avoid using in instances where the nut is soaked in the fluid. wrench dedicated to the LQ1 to tighten the nut
securely. The tightening is enough when the clearance
4. Screw in the R or NPT screw after inserting the tubing. (If the
between the end face of the nut and the body is 2 mm
screw is screwed in first, the tubing may be hard to insert.)
or less (Refer to figure 1).
2 mm or less

Fig. 1
941 A
LQHB Series

Dimensions

Metric Size
øM
Model Size A H L M W
LQHB03-
1 22.5 — 27 11.5 10
(L) LQHB04-
Class 1 LQHB06- 2 27.5 14 34 16.5 14
(A)
LQHB08-
H 3 34.5 17 42.1 23 19
W LQHB10-
LQHB12- 4 40 21 49 28 23
øM
LQHB19- 5 50 26 61.1 39 32
SMC

LQHB25- 6 66 36 77 49 46
Port size
R (NPT) Class 2 to 5
Inch Size
Model Size A H L M W
LQHB03- 1 22.5 — 27 11.5 10
øM LQHB07- 2 27.5 14 34 16.5 14
LQHB11- 3 34.5 17 42.1 23 19
H

LQHB13- 4 40 21 49 28 23
LQHB19- 5 50 26 61.1 39 32
LQHB25- 6 66 36 77 49 46

Class 6
Types of Use
There are presumably two different types of use for the bore through connector as indicated in conditions A and B, and the
specifications will differ according to the type of use.

Condition A For applications including boring through panels or Condition B For applying sustained pressure to the female thread.
walls, etc. Using the same pressure and temperature as that
Atmospheric release. of the inside of the tube.

Operating range for the bore through connector Operating range of use for the bore through connector
1.2 1.2
tAvailable area of use for the sizes below ø8
rAvailable area of use for the sizes below ø10,3/8"
1 1 eAvailable area of use for the sizes below ø12,1/2"
Available area of use for all sizes
wAvailable area of use for the sizes below ø19,3/4"
t
0.8 0.8 qAvailable area of use for the sizes below ø25,1"
Pressure (MPa)

Pressure (MPa)

0.6 Available area of use for 0.6 Available area of use for
sizes the exception of ø25,1" r the sizes ø3,ø4,ø6,1/8",1/4"

0.4 0.4
e
0.2 0.2
w
q
0 0
0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200
Temperature (°C) Temperature (°C)
942
LQ1/LQ3/LVN/LQHB Series
Applicable Fluids
Material and fluid compatibility check list
for high purity fluoropolymer fittings
Chemical Compatibility

Acetic acid 100%  LVC


Acetone 100%  Note 1,2) LVA
Ammonium fluoride 40%  LVH
Ammonium hydroxide 30% 
LVD
Butyl acetate 100% 
LVQ
Methylne chloride 100% 
LVP
Hydrochloric acid 38% 
LVW
Hydrofluoric acid 50% 

Hydrogen peroxide 60%  LQ1


Methanol 100%  LQ3
Methyl ethyl Ketone —  Note 2) LVN
Nitric acid 70%  Note 2)
LQHB
Phosphoric acid 86%  TL
TIL
Caustic potash 85% 
TLM
TILM
Sulfuric acid 100%  Note 2)
TD
Toluene —  Note 1,2) TID
TH
Xylene —  Note 2) TIH

Sodium hydroxide (caustic soda) 100%  Note 2)

1.1.1-Trichloroethane 100%  Note 2)

Rhosphorus pentachloride — 

Isobutyl alcohol —  Note 1)

Isopropyl alcohol —  Note 1)

Ozone — 

Ethyl acetate —  Note 1,2)

DI water (Pure water) — 

Nitrogen — 

Ultrapure water — 

Tmah —  Note 2) Table symbol  : can be used.

The material and fluid compatibility check list provides reference values as a guide only.
Note 1) Since static electricity may be generated, implement suitable countermeasures.
Note 2) In the case of nut with PVDF material, it cannot be used due to atmosphere or temperature. Use the nut with PFA material.

• Fluid temperature indicates compatibility below 200°C (below 150°C in the case of a nut with PVDF material).
• The material and fluid compatibility check list provides reference values as a guide only, therefore we do not guarantee
the application to our product.
• The data above is based on the information presented by the material manufacturers.
• SMC is not responsible for its accuracy and any damage happened because of this data.
943
LQ1/LQ3/LVN/LQHB Series
Fluoropolymer Fittings/Needle Valve/
Bore Through Connector/ Precautions 1
Be sure to read this before handling the products.
Refer to back page 50 for Safety Instructions.

Design and Selection Piping

Warning Caution
1. Confirm the specifications. 2. Tighten the nut until it touches the end surface of
Give careful consideration to operating conditions such as the the body, and then tighten it an additional 1/8 turn. If
application, fluid and environment, and use within the operat- the nut won’t turn any further, then it means a suffi-
ing ranges specified in this catalog. cient tightening has occurred. Refer to the proper
2. Fluid tightening torques shown below.
Operate within the indicated fluid temperature range. Nut tightening torque for piping
3. Maintenance space Torque (N.m)
Body class
Ensure the necessary space for maintenance and inspections. LQ1 LQ3 LVN
1 — Note 1) 0.7 to 0.9 —
4. Fluid pressure range
2 0.3 to 0.4 1.6 to 1.8 1.5 to 2.0
Keep the supplied fluid pressure within the operating pressure 3 0.8 to 1.0 3.2 to 3.5 3.0 to 3.5
range shown in the catalog.
4 1.0 to 1.2 5.0 to 5.3 7.5 to 9.0
5. Countermeasures for static electricity 5 2.5 to 3.0 10.0 to 10.5 —
Since static electricity may be generated depending on the 6 5.5 to 6.0 22.5 to 23.0 —
fluid being used, implement suitable countermeasures. 7 — 23.0 to 26.5 —
Note 1) The LQ1 Body class 1 must be tightened manually.
Note 2) Refer to page 941 for the LQHB series.
Mounting
3. Use sealant tape for the piping of taper thread parts
Warning such as LQH and LQL.
1. After mounting, perform suitable function and leak Tape the ridges tightly with the sealant tape, starting one ridge
tests to confirm that the mounting is correct. width left from thread end side. 3 to 4 sealant tapes are
required.
Taper thread mounting torque
Bore size Torque (N.m)
Piping 1/8 0.6 to 0.9

Caution 1/4
3/8
0.8 to 1.2
1.0 to 1.6
1. Connect tubing with special tools. 1/2 1.5 to 2.0
Refer to the pamphlet “High-Purity Fluoropolymer Fittings 3/4 2.0 to 2.7
Hyper Fitting/LQ1, 2 Series Work Procedure Instructions” 1 2.5 to 3.6
(M-E05-1) for connecting tubing and special tools. 1 1/4 5.5 to 7.5
(Downloadable from our web site.)
4. Nut tightening torque for the panel mount union.
Nut tightening torque for the panel mount union
Body class Torque (N.m)
1 0.5 to 0.6
2 0.6 to 0.7
3 1.2 to 1.3
4 4.5 to 4.6
5 6.8 to 6.9
6 12.4 to 12.5

A 944
LQ1/LQ3/LVN/LQHB Series
Fluoropolymer Fittings/Needle Valve/
Bore Through Connector/ Precautions 2
Be sure to read this before handling the products.
Refer to back page 50 for Safety Instructions.

Operating Environment Installation of Tubing

Warning Caution LVC


1. Do not use in locations having an explosive atmo- 1. Cut the end of the tubing at a right angle and pass it
sphere. through the fitting nut. After placing the tubing in LVA
2. Do not operate in locations where vibration or impact the holder, push it onto the insert bushing until it
occurs. stops and clamp it with the knob. LVH
3. In locations near heat sources, block off radiated As a guide when tightening the tubing with the
heat. knob, maintain a uniform gap (approx. 2 mm) on LVD
both sides of the holder.
Maintenance • When the tubing is curved, straighten it out before using it. LVQ
• The tubing may slip if there is oil or dust, etc., on the holder.
Warning Remove the contamination using alcohol or another suitable LVP
cleaner.
1. When removing or reinstalling fittings, remove any LVW
remaining chemicals and carefully replace them
Use of Tubing
with DI water (pure water) or air, etc., before LQ1
beginning work activities.
2. Tightening of taper threads for piping Caution LQ3
Because the taper threads are made of resin, minute leakage 1. Refer to the applicable tubing sizes shown below for
may gradually occur due to stress relaxation. Perform periodic tubing to be used. LVN
inspections, and if leakage is detected correct the problem by
Applicable tubing sizes
additional tightening. If additional tightening becomes ineffec-
Connection O.D. (mm) Internal thickness (mm) LQHB
tive, replace the fitting with a new product.
tubing size Standard size Tolerance Standard size Tolerance TL
3. Check the following during regular maintenance, and
replace components as necessary. ø3 x ø2 3.0 TIL
0.5 ±0.06
ø4 x ø3 4.0 TLM
a) Scratches, gouges, abrasion, corrosion
ø6 x ø4 6.0 +0.2 TILM
b) Twisting, flattening or distortion of tubing
Metric ø8 x ø6 8.0 −0.1
c) Hardening, deterioration or softening of tubing 1.0 ±0.1 TD
sizes ø10 x ø8 10.0 TID
4. Do not repair or patch the replaced tubing or fittings
for reuse. ø12 x ø10 12.0 TH
ø19 x ø16 19.0 +0.3 TIH
1.5 ±0.15
ø25 x ø22 25.0 −0.1
Operating Precautions
1/8" x 0.086" 3.18 0.5
±0.1
Warning 3/16" x 1/8"
1/4" x 5/32"
4.75
6.35
+0.2
0.8
1.2 ±0.12
−0.1
1. Operate within the range of the maximum operating 3/8" x 1/4" 9.53
pressure. Inch
sizes 1/2" x 3/8" 12.7
1.6 ±0.15
3/4" x 5/8" 19.0 +0.3
Caution 1" x 7/8" 25.4 −0.1
1 1/4" x 1.1" 31.75 ±0.25 1.9 ±0.2
1. After a long period of non-use, perform inspections
1 1/2" x 1.33" 38.1 ±0.2 2.2 ±0.2
before beginning operation.
2. Use sufficient care in the handling of the LQ series
clean packaging types when their packaging is Return of Product
opened.
3. The LVN series cannot be used as a stop valve. Be Warning
careful not to apply any excessive force to the If the product to be returned is contaminated or is
stroke end, which fully opens and closes, to avoid possibly contaminated with substances that are harm-
accidental damage or changes in flow rate charac- ful to humans, for safety reasons, please contact SMC
teristics. beforehand and then employ a specialist cleaning
company to decontaminate the product. After the
decontamination prescribed above has been carried
out, submit a Product Return Request Sheet or the
Detoxification/Decontamination Certificate to SMC and
await SMC’s approval and further instructions before
attempting to return the item.
Please refer to the International Chemical Safety
Cards (ICSC) for a list of harmful substances.
If you have any further questions, please don’t
hesitate to contact your SMC sales representative.
945 B
946
Fluoropolymer Tubing Variations
TL/TIL/TLM/TILM/TD/TID/TH/TIH Series
RoHS

High Purity Fluoropolymer Tubing Fluoropolymer Tubing (PFA) LVC


TL/TIL Series Material Super PFA TLM/TILM Series Material PFA LVA
It is suitable for applications which require a highly smooth The material consists of a good chemical resistant fluor- LVH
internal surface and small amount of elution of fluorine ions. opolymer. This also has good heat resistance, and it is suit-
∗ It has heat and chemical resistance equivalent to PFA. P.948 able for a wide range of applications. P.949 LVD
LVQ
LVP
LVW
LQ1
LQ3
LVN
Soft Fluoropolymer Tubing FEP Tubing (Fluoropolymer) LQHB
TD/TID Series Material Modified PTFE TH/TIH Series Material FEP TL
TIL
TLM
Flexibility improved by approx. 20% This has better resistance in chemical environments.
TILM
(Compared with SMC TL/TIL Series)
P.952 P.954
Suitable for applications which require flexibility. TD
TID
TH
TIH

Series TL/TIL TLM/TILM TD/TID TH/TIH


Material Super PFA PFA Modified PTFE FEP
Chemical resistance 
Heat resistance 260°C 260°C 260°C 200°C
Flexibility    
Ion elution   
Internal smoothness   
Fluid Chemicals, Deionized water Chemicals, Deionized water Air, Water, Inert gas
Metric ø4 to ø19 ø2 to ø25 ø4 to ø12 ø4 to ø12
Tubing O.D.
Inch 1/8" to 1" 1/8" to 1 1/4" 1/8" to 1/2" 1/8" to 3/4"
Color Translucent Translucent, Red, Blue, Black Translucent Translucent, Red, Blue, Black
One-touch fittings — KQ2, KQG2, KP, KP — KQ2, KQG2, KP, KP
fitting series
Applicable

Miniature fittings — M, MS (Hose nipple type) M, MS (Hose nipple type) M, MS (Hose nipple type)
Insert fittings — KF, KFG2 KF, KFG2 KF, KFG2
Fluoropolymer fittings LQ series LQ series LQ series LQ series
: Very good : Good : Moderate
The comparison table shown above was prepared based on a relative comparison taking the characteristics of each fluoropolymer tubing into consideration.
947
RoHS
High Purity
Fluoropolymer Tubing

TL/TIL Series Material: Super PFA

Series and Specifications


Metric sizes (TL series) Inch sizes (TIL series)
Tubing model TL0403 TL0604 TL0806 TL1008 TL1210 TL1916 TIL01 TILB01 TIL05 TIL07 TIL11 TIL13 TIL19 TIL25
Nominal diameter – – – – – – 1/8" 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 1"
Tubing size ø4 x ø3 ø6 x ø4 ø8 x ø6 ø10 x ø8 ø12 x ø10 ø19 x ø16 1/8" x 0.086" 1/8" x 1/16" 3/16" x 1/8" 1/4" x 5/32" 3/8" x 1/4" 1/2" x 3/8" 3/4" x 5/8" 1" x 7/8"
Basic
O.D. diameter 4 6 8 10 12 19 3.18 3.18 4.75 6.35 9.53 12.7 19.05 25.4
(mm) Tolerance ±0.1 +0.2
−0.1 ±0.1 +0.2
−0.1
Thickness Basic
diameter 0.5 1 1.5 0.5 0.8 0.8 1.2 1.6
(mm) Tolerance ±0.05 ±0.1 ±0.15 ±0.05 ±0.08 ±0.08 ±0.12 ±0.15
10 m – – –    – – – –   – –
20 m        –      
50 m        –      
Bundle
100 m        –      –
16 m (50 ft) – – – – – –        
33 m (100 ft) – – – – – –        
Straight pipe 2 m        –      
Color Translucent (color of material)
Applicable fluid Refer to the applicable fluid in page 957.
Applicable fittings Fluoropolymer Fittings LQ series
Max. 20°C 1.0 1.0 1.0 0.9 0.7 0.6 1.0 1.0 1.0 1.0 1.0 1.0 0.7 0.5
operating 100°C 0.45 0.64 0.43 0.33 0.27 0.24 0.59 0.92 0.62 0.73 0.62 0.43 0.26 0.19
pressure 200°C 0.21 0.29 0.20 0.15 0.12 0.11 0.27 0.42 0.28 0.34 0.28 0.20 0.12 0.09
(MPa) 260°C 0.09 0.12 0.08 0.06 0.05 0.05 0.11 0.17 0.12 0.14 0.12 0.08 0.05 0.04
Burst pressure (MPa at 20°C ) 4.9 6.9 4.7 3.6 2.9 2.6 6.4 9.9 6.7 7.9 6.7 4.6 2.8 2.0
Min. bending Recommended radius 35 35 60 100 130 220 20 10 25 35 60 95 220 400
radius (mm) Tube close bend radius 20 20 40 65 110 160 12 6 20 20 30 60 160 290
Max. operating temperature (Fixed use) 260°C
Material Super PFA
Note 1) When using the product at a temperature other than those shown in the table above, use it at a maximum operating pressure or less that is calculated from the following formula. How to measure the
(Max. operating pressure) = 1/4 x (burst pressure drop coefficient) x (burst pressure at 20°C) minimum bending radius
Note 2) When using a fluid in liquid form, the surge pressure must be no more than the maximum operating pressure. A surge pressure higher than the maximum operating pressure can 2R
Fixed side

cause breakage of the fitting or bursting of the tubing. Furthermore, abnormal temperature rise caused by adiabatic compression may result in the tube bursting.
Note 3) Do not use this product in a manner in which the tube is not fixed. Observe the lesser value of the maximum operating pressure between the tubing and fitting. A material change At a temperature of 20°C,
over a long duration or due to high-temperature may cause leakage. Perform periodic maintenance and replace with a new product immediately when abnormalities are detected. bend the tubing into a U
(Refer to “Maintenance” of the tubing precautions on page 960.) shape. Fix one end and
For other precautions, refer to “Fittings & Tubing Precautions” in Best Pneumatics No. 7. When using the fluoropolymer fittings, refer to the precautions on pages 944 and 945. gradually move the other
Note 4) Minimum bending radius is measured as shown left as representative values. • Use a tube above the recommended minimum bending radius. • The tube may be bent if used end closer. Measure 2R
under the recommended minimum bending radius. Therefore, refer to the tube close bend radius and make sure that the tube is not bent or flattened. • Please note that the tube
close bend radius is not warranted because of the value when 2R is measured by the method in the right figure if the tube is bent or flattened, etc. • The minimum bending radius at the point where the
shown above does not apply to the straight pipe (2 m). outside diameter’s rate of
Note 5) As for other commercial items, there are some cases it is not able to connect due to tolerance of dimensions. change is 5%.

Burst pressure drop curve How to Order


1.0

Metric sizes TL0604 20


Burst pressure drop coefficient

0.8

0.6
Inch sizes TIL01 20
Length Applicable to both
metric and inch size
0.4 Tubing Model
Symbol Type Length
0.2
10 10 m
20 20 m
Roll
50 50 m
0
20 40 60 80 100 120 140 160 180 200 220 240 260 100 100 m
Temperature (°C) 2S Straight 2m

Length Applicable to inch size only


Eluting fluorine ion amount Note 6) (µg/g) Eluting metal ion amount Note 6) (ng/cm2)
Symbol Type Length
Type Fluorine ion Type Al Fe Ni Na Ca
16 16 m (50 ft)
Eluting amount 0.1 or less Eluting amount 4.5 0.3 0.2 7.1 1.3 Roll
33 33 m (100 ft)
A 15 g piece of fluororesin tubing is cut off, washed The interior of the fluororesin tubing is washed with super deionized Please refer to the “Series and Specifications”
in DI water (puer water) and immersed in 15 mL of water. Approximately 20 g of super high purity hydrofluoric acid (48%)
is measured and injected into the tubing. The interior wall of the above, as the tubing length differs depending
25% methyl alcohol extract at room temperature for on each size.
tubing is immersed at normal temperature for one week with both
24 hours. Then the extract is diluted with DI water ends of the tubing plugged. Then the extract was diluted with super
(puer water) to be subjected to a quantitative deionized water to be subjected to a quantitative analysis on Al, Fe, Note 6) Figures shown in tables are representative
analysis of fluorine ions. Ni, Na and Ca by the stripping method. values, not guaranteed values.
948
Fluoropolymer Tubing PFA

TLM/TILM Series
RoHS

Max. operating temperature: 260°c LVC


LVA
LVH
22 size variations LVD
Metric size ø2 to ø25 (13 sizes) Inch size 1/8" to 1 1/4" (9 sizes) LVQ

Length per roll 10 m, 20 m, 50 m, 100 m Length per roll 10 m, 20 m, 50 m, 100 m


LVP

Straight 2m 16 m (50 ft), 33 m (100 ft) LVW


Straight 2m LQ1

4 color variations Applications


LQ3
LVN
LQHB
Photovoltaic LCD HDD TL
cell manufacturing manufacturing TIL
Translucent
manufacturing TLM
TILM
TD
Black (Opaque) TID
Medical Food
TH
TIH

Blue (Translucent)
Compatible with
Food Sanitation Law
Red (Translucent) • Compatible with the test conforming to Japan’s
Food Sanitation Law based on the 370th
notice given by the Ministry of Health and
Welfare in 1959.
• Complies with FDA (Food and Drug Adminis-
tration) §177-1550 dissolution test.

949
Fluoropolymer Tubing (PFA)
Metric Size

Series
TLM Series RoHS

Size Metric size


Model TLM0201 TLM0302 TLM0425 TLM0403 TLM0604 TLM0806 TLM1075 TLM1008 TLM1209 TLM1210 TLM1613 TLM1916 TLM2522
Tubing size ø2 x ø1 ø3 x ø2 ø4 x ø2.5 ø4 x ø3 ø6 x ø4 ø8 x ø6 ø10 x ø7.5 ø10 x ø8 ø12 x ø9 ø12 x ø10 ø16 x ø13 ø19 x ø16 ø25 x ø22
O.D. (mm) 2 3 4 4 6 8 10 10 12 12 16 19 25
I.D. (mm) 1 2 2.5 3 4 6 7.5 8 9 10 13 16 22
Length per roll Color Symbol
10 m Translucent N      
Translucent N             
Red (Translucent) R             
20 m
Roll Blue (Translucent) BU             
Black (Opaque) B             
50 m Translucent N             
100 m Translucent N            
Straight 2 m Translucent N             

Inch O.D. size Inch O.D. size O.D. 3.2 mm is available in ø 1/8 inch (3.18 mm) tubing.
5/32" 5/16" For details, refer to the table “Series” on page 951.

Specifications
Fluid: Refer to “Applicable Fluid List” on page 958. Fittings: Fluoropolymer fittings LQ series
Fluid Note 1) 2) 3) and
applicable fittings Note 1) 2) 3) Fluid: Air, Water, Inert gas Fittings: One-touch fittings KQ2, KQG2, Clean One-touch fittings KP, KP
Insert fittings KF, KFG2, Miniature fittings M, MS (Hose nipple type)
Max. operating pressure (MPa) Refer to the max. operating pressure curve.
Min. bending Recommended radius 10 20 20 35 35 60 95 100 100 130 160 220 400
radius (mm) Note 4) Tube close bend radius 7 15 15 20 20 40 60 65 65 110 130 160 290
Max. operating temperature 260°C
Material PFA (Tetrafluoroethylene perfluoroalkoxy vinyl ether copolymer)
Note 1) Fluid varies depending on the applicable fittings. How to measure the
Note 2) When using a liquid fluid, the surge pressure must not exceed the maximum operating pressure. If the surge pressure minimum bending radius
exceeds the maximum operating pressure, it will result in damage to fittings and tubes. Furthermore, abnormal
temperature rise caused by adiabatic compression may result in the tube bursting.
Note 3) Do not use this product in a manner in which the tube is not fixed. Observe the lesser value of the maximum operating
pressure between the tubing and fitting. A material change over a long duration or due to high-temperature may cause
leakage. Perform periodic maintenance and replace with a new product immediately when abnormalities are detected. Fixed
(Refer to “Maintenance” of the tubing precautions on page 960.) end
For other precautions, refer to “Fittings & Tubing Precautions” in Best Pneumatics No. 7. When using the fluoropolymer
fittings, refer to the precautions on pages 944 and 945.
Note 4) Minimum bending radius is measured as shown left as representative values.
• Use a tube above the recommended minimum bending radius.
• The tube may be bent if used under the recommended minimum bending radius. Therefore, refer to the tube close At a temperature of 20°C, bend the
bend radius and make sure that the tube is not bent or flattened. tubing into a U shape. Fix one end
• Please note that the tube close bend radius is not warranted because of the value when 2R is measured by the method and gradually move the other end
in the right figure if the tube is bent or flattened, etc. closer. Measure 2R at the point
• The minimum bending radius shown above does not apply to the straight pipe (2 m). where the outside diameter’s rate of
change is 5%.
Max. Operating Pressure
Max. operating pressure (MPa)
Group Model
2.4 20°C 100°C 200°C 260°C
Max. operating pressure MPa

2.2 A TLM0201 2.3 1.1 0.55 0.3


A
2.0 B TLM0425 1.7 0.9 0.45 0.23
1.8 TLM0302
B C 1.5 0.7 0.35 0.2
1.6 TLM0604
1.4 TLM0403
1.2
C TLM0806
D 1 0.5 0.25 0.15
1.0 TLM1075
0.8 TLM1209
0.6 TLM1008
E 0.7 0.35 0.17 0.11
0.4 TLM1613
0.2 TLM1210
F 0.6 0.3 0.15 0.1
0.0 TLM1916
−20 0 20 40 60 80 100 120 140 160 180 200 220 240 260 G TLM2522 0.4 0.2 0.1 0.05
Operating temperature °C
How to Order
1.2
Metric size
Max. operating pressure MPa

TLM0425 N 20
1.0

0.8
E
Tubing Length per roll
0.6
F designation Symbol Type Length
0.4
10 10 m
G Color indication 20 20 m
Roll
Symbol Color 50 50 m
0.2 N Translucent (Material color) 100 100 m
R Red (Translucent) 2S Straight 2m
0.0 BU Blue (Translucent)
−20 0 20 40 60 80 100 120 140 160 180 200 220 240 260 Note) Refer to the table “Series”
B Black (Opaque) above, as the tubing length
Operating temperature °C
differs depending on each size.
950
Fluoropolymer Tubing (PFA)
Inch Size

Series
TILM Series RoHS

Size
Model TILM01 TILMB01 TILM05 TILM07
Inch size
TILM11 TILM13 TILM19 TILM25 TILM32 LVC
Tubing size 1/8" x 0.086" 1/8" x 1/16" 3/16" x 1/8" 1/4" x 5/32" 3/8" x 1/4" 1/2" x 3/8" 3/4" x 5/8" 1" x 7/8" 11/4" x 11/10"
O.D.
inch
mm
1/8"
3.18
1/8" 3/16"
4.75
1/4"
6.35
3/8"
9.53
1/2"
12.7
3/4"
19.05
1"
25.4
11/4"
31.75
LVA
inch 0.086" 1/16" 1/8" 5/32" 1/4" 3/8" 5/8" 7/8" 11/10"
I.D.
mm 2.18 1.58 3.15 3.95 6.33 9.5 15.85 22.2 27.95 LVH
Length per roll Color Symbol
10 m Translucent N   LVD
Translucent N         
Red (Translucent) R         
20 m
Blue (Translucent) BU          LVQ
Roll Black (Opaque) B         
50 m Translucent N
100 m Translucent N












 
LVP
16 m ( 50 ft) Translucent N         
33 m (100 ft) Translucent N          LVW
Straight 2 m Translucent N        

Metric O.D. size O.D. 5/32" is available in ø4 metric tubing, and O.D. 5/16" is available LQ1
3.2 in ø8 metric tubing. For details, refer to the table “Series” on page 950.

LQ3
Specifications
Fluid Note 1) 2) 3) and
applicable fittings Note 1) 2) 3)
Fluid: Refer to “Applicable Fluid List” on page 958. Fittings: Fluoropolymer fittings LQ series
Fluid: Air, Water, Inert gas Fittings: One-touch fittings KQ2, KQG2, Insert fittings KFG2
LVN
Max. operating pressure (MPa) Refer to the max. operating pressure curve.
Min. bending Recommended radius
radius (mm) Note 4) Tube close bend radius
20 10 25 35 60 95 220 400 500 LQHB
12 6 20 20 30 60 160 290 360
Max. operating temperature 260°C TL
Material PFA (Tetrafluoroethylene perfluoroalkoxy vinyl ether copolymer) TIL
Note 1) Fluid varies depending on the applicable fittings. How to measure the
Note 2) When using a liquid fluid, the surge pressure must not exceed the maximum operating pressure. If the surge pressure minimum bending radius TLM
exceeds the maximum operating pressure, it will result in damage to fittings and tubes. Furthermore, abnormal TILM
temperature rise caused by adiabatic compression may result in the tube bursting.
Note 3) Do not use this product in a manner in which the tube is not fixed. Observe the lesser value of the maximum operating TD
pressure between the tube and fitting. A material change over a long duration or due to high-temperature may cause
Fixed
TID
leakage. Perform periodic maintenance and replace with a new product immediately when abnormalities are detected.
(Refer to “Maintenance” of the tubing precautions on page 960.) end TH
For other precautions, refer to “Fittings & Tubing Precautions” in Best Pneumatics No. 7. When using the fluoropolymer TIH
fittings, refer to the precautions on pages 944 and 945.
Note 4) Minimum bending radius is measured as shown left as representative values.
• Use a tube above the recommended minimum bending radius.
• The tube may be bent if used under the recommended minimum bending radius. Therefore, refer to the tube close At a temperature of 20°C, bend the
bend radius and make sure that the tube is not bent or flattened. tubing into a U shape. Fix one end
• Please note that the tube close bend radius is not warranted because of the value when 2R is measured by the method and gradually move the other end
in the right figure if the tube is bent or flattened, etc. closer. Measure 2R at the point
• The minimum bending radius shown above does not apply to the straight pipe (2 m). where the outside diameter’s rate of
change is 5%.
Max. Operating Pressure Max. operating pressure (MPa)
Group Model
2.4 20°C 100°C 200°C 260°C
Max. operating pressure MPa

2.2 A TILMB01 2.3 1.1 0.55 0.3


2.0
A B TILM07 1.7 0.9 0.45 0.23
1.8 TILM05
1.6 B C 1.5 0.7 0.35 0.2
TILM11
1.4 TILM01
1.2 C D 1 0.5 0.25 0.15
TILM13
1.0
F TILM19 0.6 0.3 0.15 0.1
0.8
TILM25
0.6 G 0.4 0.2 0.1 0.05
0.4 TILM32
0.2
0.0
−20 0 20 40 60 80 100 120 140 160 180 200 220 240 260
How to Order
Operating temperature °C
Inch size
1.2
TILM01 N 20
Max. operating pressure MPa

D
1.0
Tubing Length per roll
0.8 designation Symbol Type Length
10 10 m
0.6
F Color indication 20 20 m
Symbol Color 50 50 m
0.4 Roll
G N Translucent (Material color) 100 100 m
0.2 R Red (Translucent) 16 16 m (50 ft)
BU Blue (Translucent) 33 33 m (100 ft)
0.0 B Black (Opaque) 2S Straight 2m
−20 0 20 40 60 80 100 120 140 160 180 200 220 240 260 Note) Refer to the table “Series” above, as
Operating temperature °C the tubing length differs depending
on each size.
951
Soft Fluoropolymer Tubing
Metric Size

TD Series RoHS

Model/Specifications
Size Metric size
Model TD0425 TD0604 TD0806 TD1075 TD1209
Tubing O.D. (mm) 4 6 8 10 12
Tubing I.D. (mm) 2.5 4 6 7.5 9

Roll
10 m     
20 m     
Color Translucent (material color)
Applicable fluid Refer to the applicable fluid in page 957.
Fluid Note 1) Air, Water Note 1), Inert gas
Insert Fittings KF series
Applicable fittings Note 2) Stainless Steel 316 Insert Fittings KFG series
Miniature fittings M, MS series (Hose nipple type)
Flexibility: Improved by approx. 20% Fluoropolymer fitting LQ series
* SMC comparison (Fluoropolymer tubing,
TL/TIL series) 20°C 1.6 1.4 0.9 0.9 0.9
Max. operating 100°C 0.9 0.7 0.5 0.5 0.5
Compatible with the Food Sanitation Law pressure (MPa) 200°C 0.45 0.35 0.25 0.25 0.25
• Compatible with the test conforming to the Food
260°C 0.23 0.2 0.15 0.15 0.15
Sanitation Law based on the 370th notice given by
the Ministry of Health and Welfare in 1959. Min. bending Recommended radius 15 25 45 55 75
• Complies with FDA (Food and Drug Adminis- radius (mm) Note 3) Tube close bend radius 8 16 31 35 41
tration) §177-1550 dissolution test. Max. operating temperature (fixed usage) 260°C
Material Modified PTFE (Polytetrafluoroethylene resin)
Operating Temperature: Max. 260°C Note 1) When using a liquid fluid, the surge pressure must be under the maximum operating pressure.
It varies depending on the operating pressure. If the surge pressure exceeds the maximum operating pressure, it will result in damage to
Refer to the graph for the maximum operating fittings and tubing. Furthermore, abnormal temperature rise caused by adiabatic compression
pressure. may result in the tubing bursting.
Note 2) Do not use this product in a manner in which the tubing is not fixed.
How to measure Observe the lesser value of the maximum operating pressure between the tubing and fittings.
the minimum A material change over a long duration or due to high-temperature may cause leakage.
bending radius Perform periodic maintenance and replace with a new product immediately when abnormali-
ties are detected.
(Refer to “Maintenance” of the tubing precautions on page 960.)
Bend the tubing into the
For other precautions, refer to “Fittings & Tubing Precautions” in Best Pneumatics No. 7.
U-form at a temperature
Fixed end

When using the fluoropolymer fittings, refer to the precautions on pages 944 and 945.
of 20°C. Fix one end Note 3) The minimum bending radius is the representative value measured as shown in the left figure.
and close loop gradu- • Use a tube above the recommended minimum bending radius.
ally. Measure 2R when • The tubing may be bent if used under the recommended minimum bending radius.
the deformed ratio of the Therefore, refer to the tube close bend radius and make sure that the tubing is not bent or flattened.
tubing diameter at • Please note that the tube close bend radius is not warranted because of the value when 2R
bending reaches 5%. is measured by the method in the left figure if the tubing is bent or flattened, etc.

Maximum Operating Pressure How to Order


Metric size
2.0
1.8
TD0425 10
Max. operating pressure MPa

TD0425
1.6 Length per roll
Symbol Length
1.4 TD0604
10 10 m roll
1.2
20 20 m roll
1.0 TD0806/TD1075/TD1209
0.8 Tubing model
0.6
0.4
0.2
0.0
−20 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

Operating temperature °C

952
Soft Fluoropolymer Tubing
Inch Size

TID Series RoHS

LVC
Model/Specifications
Size Inch size LVA
Model TID01 TID05 TID07 TID11 TID13
Tubing O.D.
inch 1/8" 3/16" 1/4" 3/8" 1/2" LVH
mm 3.18 4.75 6.35 9.53 12.7

0.086"
0.124" 0.156" 0.25" 0.374" LVD
Tubing I.D. inch (1/8") (5/32") (1/4") (3/8")
mm 2.18 3.15 3.95 6.33 9.5 LVQ
Roll
8 m (25 ft)     
16 m (50 ft)      LVP
Color Translucent (material color)
Applicable fluid Refer to the applicable fluid in page 957. LVW
Flexibility: Improved by approx. 20% Fluid Note 1) Air, Water Note 1), Inert gas
* SMC comparison (Fluoropolymer tubing,
TL/TIL series)
Applicable fittings Note 2) Fluoropolymer fitting LQ series LQ1
20°C 1.4 1.4 1.6 1.4 0.9
Compatible with the Food Sanitation Law Max. operating 100°C 0.7 0.7 0.9 0.7 0.5 LQ3
• Compatible with the test conforming to the Food pressure (MPa) 200°C 0.35 0.35 0.45 0.35 0.25
Sanitation Law based on the 370th notice given by 260°C 0.2 0.2 0.23 0.2 0.15 LVN
the Ministry of Health and Welfare in 1959. 15 20 25 40 75
Min. bending Recommended radius
• Complies with FDA (Food and Drug Adminis-
tration) §177-1550 dissolution test.
radius (mm) Note 3) Tube close bend radius 9 10 15 23 42 LQHB
Max. operating temperature (fixed usage) 260°C
TL
Material
Operating Temperature: Max. 260°C Modified PTFE (Polytetrafluoroethylene resin) TIL
It varies depending on the operating pressure. Note 1) When using a liquid fluid, the surge pressure must be under the maximum operating pressure. If
the surge pressure exceeds the maximum operating pressure, it will result in damage to fittings TLM
Refer to the graph for the maximum operating
and tubing. Furthermore, abnormal temperature rise caused by adiabatic compression may TILM
pressure.
result in the tubing bursting. TD
How to measure Note 2) Do not use this product in a matter in which the tubing is not fixed. TID
the minimum Observe the lesser value of the maximum operating pressure between the tubing and fittings.
A material change over a long duration or due to high-temperature may cause leakage. TH
bending radius TIH
Perform periodic maintenance and replace with a new product immediately when abnormali-
ties are detected.
Bend the tubing into the (Refer to “Maintenance” of the tubing precautions on page 960.)
U-form at a temperature For other precautions, refer to “Fittings & Tubing Precautions” in Best Pneumatics No. 7.
Fixed end

of 20°C. Fix one end When using the fluoropolymer fittings, refer to the precautions on pages 944 and 945.
and close loop gradu- Note 3) The minimum bending radius is the representative value measured as shown in the left figure.
ally. Measure 2R when • Use a tube above the recommended minimum bending radius.
the deformed ratio of the • The tubing may be bent if used under the recommended minimum bending radius.
tubing diameter at Therefore, refer to the tube close bend radius and make sure that the tubing is not bent or flattened.
bending reaches 5%. • Please note that the tube close bend radius is not warranted because of the value when 2R
is measured by the method in the left figure if the tubing is bent or flattened, etc.

Maximum Operating Pressure How to Order


Inch size
2.0
1.8
TID01 8
Max. operating pressure MPa

TID07
1.6 Length per roll
Symbol Length
1.4 TID01/TID05/TID11
8 8 m (25 ft) roll
1.2
16 16 m (50 ft) roll
1.0 TID13
0.8 Tubing model
0.6
0.4
0.2
0.0
−20 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

Operating temperature °C

953
FEP Tubing (Fluoropolymer)
Metric Size

TH Series RoHS
Series -20 m roll -100 m roll
Metric size
Model TH0402 TH0425 TH0604 TH0806 TH1075 TH1008 TH1209 TH1210
Tubing O.D. (mm) 4 4 6 8 10 10 12 12
Tubing I.D. (mm) 2 2.5 4 6 7.5 8 9 10

Color Symbol
Translucent N
Red (Translucent) R
Blue (Translucent) BU
Black (Opaque) B

Inch nominal size Inch nominal size


5/32" 5/16"
Operating Temperature: Max. 200°C
It varies depending on the operating pressure. Refer Specifications
to the graph for the maximum operating pressure. Fluid Air, Water Note 1), Inert gas
Compatible with the Food Sanitation Law Applicable Note 2)
One-touch fittings, Insert fittings
• Compatible with the test conforming to the Food Fluoropolymer fittings: LQ series Note 3)
fittings
Sanitation Law based on the 370th notice given Miniature fittings: M, MS series (Hose nipple type)
by the Ministry of Health and Welfare in 1959.
• Complies with FDA (Food and Drug Administra- 20°C 2.3 1.7 1.5 1 0.7 1 0.7
tion) §177-1550 dissolution test. Max. operating 100°C 0.85 0.6 0.55 0.4 0.25 0.4 0.25
pressure (MPa) 200°C 0.4 0.3 0.3 0.2 0.1 0.2 0.1
How to measure the minimum
bending radius. Refer to the max. operating pressure curve.
Min. bending Recommended 15 20 35 60 95 100 130
radius radius
Fixed end

(mm) Note 4) Tube close bend


radius 10 15 20 40 60 65 110
Operating temperature Air, Inert gas: -20 to 200°C Water: 0 to 100°C (No freezing)
Material FEP (Fluorinated Ethylene Propylene Resin)
Note 1) When using a fluid in liquid form, the surge pressure must not exceed the maximum operating pressure. A surge
pressure higher than the maximum operating pressure can cause breakage of the fittings, or rupture of the tubing.
At a temperature of 20°C, bend Furthermore, an abnormal temperature increase due to adiabatic compression can also result in ruptured tubing.
the tubing into a U shape. Fix Note 2) Do not use in locations where the FEP tubing will move.
one end and gradually move the Be sure to operate under the maximum operating pressure conditions using the lower maximum operating
other end closer. Measure 2R at specification of either the tubing or fittings.
the point where the outside After long term use or under high temperatures, some fittings leakage may occur due to material deterioration with
diameter's rate of change is 5%. age. Perform periodic inspections, and if any leakage is detected, replace with a new product immediately.
When the insert and miniature fittings are used over extended periods of time, it may cause leakage due to the
material deterioration of age. In such a case, give an additional tightening to the tube connection part. If leakage
Max. Operating Pressure still occurs after giving an additional tightening, replace the fitting with a new product. For other precautions, refer
to “Fittings & Tubing Precautions” in Best Pneumatics No. 7. When using the fluoropolymer fittings, refer to the
3 precautions on pages 944 and 945. Select the size after confirming O.D. and I.D.
Note 3) TH0402, TH0425, TH1075 and TH1209 are not available because of different internal diameters.
Note 4) The minimum bending radius is the representative value measured as shown in the left figure.
TH0402 • Use a tube above the recommended minimum bending radius.
Max. Operating Pressure MPa

• The tubing may be bent if used under the recommended minimum bending radius. Therefore, refer to the tube
close bend radius and make sure that the tubing is not bent or flattened.
2
• Please note that the tube close bend radius is not warranted because of the value when 2R is measured by the
TH0425 method in the left figure if the tubing is bent or flattened, etc.
TH0604
TH0806/TH1075/TH1209 How to Order
TH1008/TH1210
Metric size
1

TH0604 N 20
0.5
Indication of tubing model Length per roll
Color indication
Symbol Roll size
0 Symbol Color
020 20 m roll
-20 0 20 40 60 80 100120140 160 180200 N Translucent (Material color)
100 Note) 100 m roll
Operating Temperature °C R Red (Translucent)
Note) 100 m roll is available
BU Blue (Translucent)
Note) The maximum operating pressure varies dependant with translucent (color
on the I.D. bore size even if the O.D. is the same. B Black (Opaque) indication: N) only.
954
FEP Tubing (Fluoropolymer): Metric Size TH Series

Made to Order
(Please contact SMC for specifications in detail, dimensions, delivery and specifications other than those mentioned above.)
Reinforced corrugated
cardboard specification ø6, Translucent only: Suffix “-X64” to the end of part number. Ex.) TH0604N-500-X64
longer length reel

Made to Order Availability


Part no. Length Model TH0604N Color
LVC
X64
250 m reel
500 m reel
Translucent LVA
LVH
Reinforced corrugated cardboard specification: Longer length reel/-X64
LVD
Dimensions
LVQ
Dimensions
Model øD1 øD2 øD3 W
Weight LVP
(kg)
TH0604N-250-X64 475 200 52 120 9.4 LVW
TH0604N-500-X64
øD1

475 200 52 220 18.5

LQ1
LQ3
øD3 W
øD2 LVN
LQHB
TL
TIL
TLM
TILM
TD
TID
TH
TIH

955
FEP Tubing (Fluoropolymer)
Inch Size

TIH Series RoHS

Series -16 m (50 ft) roll -33 m (100 ft) roll


Inch size
Model TIHA01 TIHB01 TIHC01 TIHA05 TIHB05 TIHA07 TIHB07 TIHA11 TIHB11 TIH13 TIH19
inch 1/8" 3/16" 1/4" 3/8" 1/2" 3/4"
Tubing O.D.
mm 3.18 4.75 6.35 9.53 12.7 19.05
0.124" 0.156" 0.25" 0.374" 0.624"
inch 0.093" 0.086" 0.065" 0.137" 0.18" 0.275"
Tubing I.D. (1/8") (5/32") (1/4") (3/8") (5/8")
mm 2.36 2.18 1.65 3.48 3.15 4.57 3.95 6.99 6.33 9.5 15.85

Color Symbol
Translucent N
Red (Translucent) R
Blue (Translucent) BU
Operating Temperature: Max. 200°C Black (Opaque) B
It varies depending on the operating pressure. Refer
to the graph for the maximum operating pressure.
Specifications
Compatible with the Food Sanitation Law Fluid Air, Water Note 1), Inert gas
• Compatible with the test conforming to the Food
Sanitation Law based on the 370th notice given Applicable fittings Note 2) One-touch fittings, Fluoropolymer fittings: LQ series Note 3)
by the Ministry of Health and Welfare in 1959. 20°C 1 2.3 1 1.5 1 1.7 1 1.5 1 0.7
• Complies with FDA (Food and Drug Administra- Max. operating 100°C 0.4 0.85 0.4 0.55 0.4 0.6 0.4 0.55 0.4 0.25
tion) §177-1550 dissolution test. pressure (MPa) 200°C 0.2 0.4 0.2 0.3 0.2 0.3 0.2 0.3 0.2 0.1
How to measure the minimum
Refer to the max. operating pressure curve.
bending radius.
Min. bending Recommended 25 20 10 35 25 55 35 85 60 95 220
radius radius
(mm) Note 4) Tube close bend 20 12 7 25 20 35 20 55 30 60 160
Fixed end

radius
Operating temperature Air, Inert gas: -20 to 200°C Water: 0 to 100°C (No freezing)
Material FEP (Fluorinated Ethylene Propylene Resin)
Note 1) When using a fluid in liquid form, the surge pressure must not exceed the maximum operating pressure. A surge
pressure higher than the maximum operating pressure can cause breakage of the fittings, or rupture of the tubing.
At a temperature of 20°C, bend Furthermore, an abnormal temperature increase due to adiabatic compression can also result in ruptured tubing.
the tubing into a U shape. Fix Note 2) Do not use in locations where the FEP tubing will move.
Be sure to operate under the maximum operating pressure conditions using the lower maximum operating
one end and gradually move the
specification of either the tubing or fittings.
other end closer. Measure 2R at After long term use or under high temperatures, some fittings leakage may occur due to material deterioration with
the point where the outside age. Perform periodic inspections, and if any leakage is detected, replace with a new product immediately.
diameter's rate of change is 5%. When the insert and miniature fittings are used over extended periods of time, it may cause leakage due to the
material deterioration of age. In such a case, give an additional tightening to the tube connection part. If leakage
Max. Operating Pressure still occurs after giving an additional tightening, replace the fitting with a new product. For other precautions, refer
to “Fittings & Tubing Precautions” in Best Pneumatics No. 7. When using the fluoropolymer fittings, refer to the
3 precautions on pages 944 and 945. Select the size after confirming O.D. and I.D.
Note 3) TIHA01, TIHC01, TIHA05, TIHA07 and TIHA11 are not available because of different internal diameters.
Note 4) The minimum bending radius is the representative value measured as shown in the left figure.
TIHC01 • Use a tube above the recommended minimum bending radius.
Max. Operating Pressure MPa

• The tubing may be bent if used under the recommended minimum bending radius. Therefore, refer to the tube
TIHB05/TIHB11
close bend radius and make sure that the tubing is not bent or flattened.
2 • Please note that the tube close bend radius is not warranted because of the value when 2R is measured by the
TIHB07 method in the left figure if the tubing is bent or flattened, etc.
TIHA01/TIHB01/TIHA05
TIHA07/TIHA11/TIH13 How to Order
Inch size

TIHA01 N 16
1
TIH19

0.5
Indication of tubing model Length per roll
Color indication Symbol Roll size
0 Symbol Color 16 m (50 ft) roll
16
-20 0 20 40 60 80 100120140 160 180200 N Translucent (Material color)
33 Note) 33 m (100 ft) roll
Operating Temperature °C R Red (Translucent)
Note) 33 m(100 ft) roll is
BU Blue (Translucent) available with translucent
Note) The maximum operating pressure varies dependant
on the I.D. bore size even if the O.D. is the same. B Black (Opaque) (color indication: N) only.
956
TL/TIL/TD/TID Series
Applicable Fluid List
Chemical resistance of Fluoropolymer Super PFA, modified PTFE material
Chemicals in the list below are chemically inert Note) to Super PFA, modified PTFE material. Possible physical
effects may occur such as penetration and swelling due to temperature, pressure and chemical concentration.
To use Super PFA, modified PTFE tube in a chemical environment, tests should be performed with the same
environment to ensure no problem occurs with operating environment.

1,1,1-Trichloroethane Formic acid Trichloroethylene


LVC
1,1,2-Trichloroethane Ethyl formate Trichloroacetic acid
LVA
1,2,3-Trichloropropane Propyl formate Toluene
1,2-Dichlorobutane Methyl formate Naphtha LVH
2,4-Dichlorotoluene Xylene Carbon dioxide
2-chloropropane Glycol Nitrogen dioxide LVD
2-nitro-2-methylpropane Glycerine Nitrobenzene
2-nitrobutanol Cresol Nitromethane LVQ
Pentabasic benzamide Chromic acid Carbon disulfide
Hydrochlorofluorocarbon-22 Chloracetic acid Piperidine LVP
N-octadecanol Chlorosulfonic acid Pyridine
N-butylamine Chloroform Pyrogallol LVW
o-chlorotoluene Paraffinum liquidum Phenol
Isobutyl adipate Acetate Butanol LQ1
Acetyl chloride Amyl acetate Phthalic acid
Acetophenone Ethyl acetate Hydrofluoric acid
LQ3
Acetone Potassium Furan
LVN
Aniline Butyl acetate Ethyl propionate
Sulfurous acid gas Propyl acetate Propyl propionate LQHB
Allyl chloride Methyl acetate Methylpropionate
Benzoic acid Salicylic acid Propylene chloride TL
TIL
Ammonium Sodium hypochlorite Bromobenzene
Sulfur Diisobutyl ketone Hexachlorethane
TLM
TILM
Isoamyl alcohol Diethylamine Hexane
TD
Isooctane Carbon tetrachloride Heptane TID
Ethanol Dioxane Benzyl alcohol
TH
Ethyl ether Cyclohexanone Benzaldehyde TIH
Ethylene glycol Cyclohexane Benzine
Ethylene chloride Dichloroethylene Benzoyl chloride
Ethylenediamine Dichloropropylene Benzonitrile
Zinc chloride Dibutyl phthalate Pentachloroethane
Aluminum chloride Dimethyl ether Boric acid
Ammonium chloride Dimethylsulfoxide Sodium boric acid
Calcium chloride Dimethylformamide Formaldehyde
Ferrous chloride Hydrobromic acid Acetic anhydride
Mercuric chloride Potassium dichromate Methanol
Stannous chloride Bromine Methyl ether
Ferric chloride DI water (Pure water) Methyl ethyl ketone
Cupric chloride Nitric acid Methylene chloride
Sodium chloride Ammonium hydroxide Ethyl butyrate
Magnesium chloride Potassium hydroxide Methyl butyrate
Hydrochloric acid Sodium hydroxide Hydrogen sulfide
Chlorine Soap, detergent Sulphuric acid
Aqua regia Diethyl carbonate Zinc sulfate
Ozone Sodium carbonate Ammonium sulfate
Oleic acid Tetrachloroethane Ferrous sulfate
Perchlorate Tetrachloroethylene Copper sulfate
Hydrogen peroxide Tetrahydrofuran Phosphoric acid
Natrium peroxide Tetrabromoethane Sodium phosphate
Gasoline Triethanolamine
Potassium permanganate Triethylamine
Note) “Chemically inert” means – not to cause any chemical reaction.

957
TLM/TILM Series
Applicable Fluid List
Chemical resistance of Fluoropolymer PFA material

Chemicals in the list below are chemically inert Note) , to PFA material. Possible physical effects may occur such as
penetration and swelling due to temperature, pressure and chemical concentration.
To use PFA tube in a chemical environment, tests should be performed with the same environment to ensure no problem
occurs with operating environment.

Acetate Butyl stearate Ethylene dicloride Malic acid Salicylic acid


Acetic anhydride Calcium acetate Ethylene glycol Mercaptan Silicate ester
Acetone Calcium bisulfite Ethylene oxide Mercuric chloride Silicone grease
Acetylene Calcium chloride Ethylenediamine Mercury Silicone oil
Acrylonitrile Calcium hydroxide Fatty acid Methyl acetate Silver nitrate
Aluminum acetate Calcium hypochlorite Ferric chloride Methyl alcohol Sodium bicarbonate
Aluminum nitrate Calcium nitrate Ferric nitrate Methyl chloride Sodium bisulfate
Aluminum bromide Calcium sulfide Ferric sulfate Methyl ethyl ketone Sodium bisulfite
Aluminum chloride Carbon dioxide Fluorboric acid Methyl isobutyl ketone Sodium hypochlorite (5%)
Aluminum fluoride Carbon disulfide Fluorobenzene Methyl methacrylate Sodium metaphosphate
Aluminum sulfate Carbonic acid Fluosilicic acid Methylene dichloride Sodium nitrate
Ammonia gas Castor oil Formaldehyde Mineral oil Sodium perborate
Ammonium carbonate Caustic soda (30%) Formic acid Monochloroacetic acid Sodium phosphate
Ammonium chloride Cellosolve Furfural Monochlorobenzene Sodium sulfite
Ammonium hydroxide Chlorosulfonic acid Gasoline Monoethanolamine Sodium thiosulfate
Ammonium nitrate Chlorotoluene Gelatine Naphtha Soybean oil
Ammonium nitrite Chromic acid Glauber's salt Naphthalene Stannic chloride
Ammonium persulfate Citric acid Glucose Naphthenic acid Stearic acid
Ammonium phosphate Coconut oil Glue Natrium peroxide Styrene
Ammonium sulfate Copper cyanide Glycerine Natural gas Sucrose solution
Amyl acetate Copper sulfate Grease Nickel acetate Sulfur
Amyl alcohol Corn oil Hexaldehyde Nickel chloride Sulfur chloride
Amyl borate Cottonseed oil Hexane Nickel sulfate Sulfuric acid (98%)
Amyl naphthalene Creosote oil Hexyl alcohol Nitric acid (60%) Sulfurous acid gas
Aniline Cresol Hydrobromic acid Nitrobenzene Tannic acid
Aniline dye Cupric chloride Hydrochloric acid Nitroethane Tartaric acid
Animal oil (Lard oil) Cyclohexane Hydrocyanic acid Nitromethane Terpineol
Aqua regia Cyclohexanol Hydrofluoric acid (49%) Nitropropane Tetrachloroethane
Arsenic acid Cyclohexanone (Anon) Hydrofluoric acid anhydrous Octyl alcohol Tetraethyl lead
Asphalt Dibutyl phthalate Hydrogen peroxide (30%) Oxalic acid Tetrahydrofuran
Barium chloride Dichlorobenzene Hydrogen sulfide Oxygen Tetralin
Barium hydroxide Diethyl sebacate Hydroquinone Ozone Thionyl chloride
Barium sulfate Diethylene glycol Hypochlorous acid Palmitic acid Triacetin
Barium sulfide Diisopropyl keton Isobutyl alcohol Perchlorate Tributoxy ethyl phosphate
Beer Dioctyl phthalate Isooctane Perchloroethylene Tributyl phosphate
Beet sugar liquors Dioctyl sebacate Isopropyl acetate Petroleum Trichloroethylene
Benzaldehyde Dipentene (Limonene) Isopropyl alcohol Phenol Tricresyl phosphate
Benzine Diphenyl Isopropyl ether Phosphoric acid (75%) Triethanolamine
Benzene (Benzol) Diphenyl oxide Kerosene Picric acid Tung oil
Benzyl alcohol Epichlorohydrin Lead acetate Piperidine Turpentine oil
Benzyl benzoate Ethanolamine Lead nitrate Potassium chloride Vegetable oil
Benzyl chloride Ethyl acetate Lead sulfamate Potassium dichromate Vinegar
Borax Ethyl acetoacetate Linolenic acid Potassium hydroxide Water
Boric acid Ethyl acrylate Linseed oil Potassium nitrate Whiskey
Bromine Ethyl alcohol Liquid ammonia Potassium permanganate Xylene
Bunker oil Ethyl benzene LPG (Liquefied petroleum gas) Potassium sulfate Zeolite
Butane Ethyl cellulose Lubricating oil Propyl acetate Zinc acetate
Butter Ethyl chloride Magnesium chloride Propyl alcohol Zinc chloride
Butyl acetate Ethyl oxalate Magnesium hydroxide Propylene Zinc sulfide
Butyl acrylate Ethyl silicate Magnesium sulfate Pyridine
Butyl alcohol (Butanol) Ethylene chlorohydrin Maleic acid Pyrrole
Note) “Chemically inert” means – not to cause any chemical reaction.

958
TH/TIH Series
Applicable Fluid List
Chemical Resistance of Fluoropolymer FEP Material
Chemicals in the list below are chemically inert Note) to FEP material, however physical properties may
be effected by temperature or pressure change.
Please make sure that operating conditions do not cause problems since the use of FEP tubing under
chemical environment is unsecured.

2-nitro-2-methyl propanol Chloroform Nitromethane


LVC
2-nitrobutanol Paraffinum liquidum Perchloroethylene
LVA
Pentabasic benzamide Allyl acetate Perphloroxylene
N-butylamine Ethyl acetate Unsymmetrical dimethylhydrazine LVH
N-octadecanol Potassium Hydrazine
N-butyl acetate Butyl acetate Pinene LVD
O-cresol Sodium hypochlorite Piperidine
Di-isobutyl adipate Carbon tetrachloride Glacial acetic acid (Acetic acid) LVQ
Acetophenone Dioxane Pyridine
Acetone Cyclohexanone Phenol LVP
Alniline Cyclohexane Phthalic acid
Abietic acid Dimethyl ether Dybutyl phthalate LVW
Sulfuric chloride Dimethylsulfoxide Dimethyl phthalate
Isooctane Dimethylformamide Hydrofluoric acid LQ1
Liquid ammonia Bromine Naphthalene fluoride
Ethyl alcohol DI water (Pure water) Nitrobenzene fluoride
LQ3
Ethyl ether Nitric acid Furan
LVN
Ethylene glycol Mercury Hexachlorethane
Ethylenediamine Ammonium hydroxide Hexane LQHB
Zinc chloride Potassium hydroxide Ethyl hexanoate
Aluminum chloride Sodium hydroxide Phenylcarbinol TL
TIL
Ammonium chloride Cetane Benzaldehyde
TLM
Calcium chloride Soap, detergent Benzonitrile TILM
Sulfuric chloride Dibutyl sebacate Borax
TD
Iron chloride (III) Diethyl carbonate Boric acid TID
Benzoyl chloride Tetrachloroethylene Formic aldehyde (Formalin)
TH
Magnesium chloride Tetrahydrofuran Acrylic anhydride TIH
Hydrochloric acid Tetrabromoethane Acetic anhydride
Chlorine (absolute) Triethanolamine Methacrylic acid
Aqua regia Trichloroethylene Allyl methacrylate
Ozone Trichloroacetic acid Vinyl methacrylate
Hydrogen peroxide Toluene Methyl alcohol
Natrium peroxide Naphtha Methyl ethyl ketone
Gasoline Naphthalene Methylene chloride
Permanganate Naphthol Sulphuric acid
Formic acid Lead Phosphoric acid
Xylene Carbon dioxide Iron phosphate (III)
Chromic acid Nitrogen dioxide Tri-n-butyl phosphate
Chlorosulfonic acid Nitrobenzene Tricresyl phosphate
Note) “Chemically inert” means – not to cause any chemical reaction.
Reference cited: Teflon®, the fluoropolymer handbook, Manual for the chemical applications of Teflon®. Du Pond-Mitsui Fluorochemicals
Co., Ltd.

Teflon® is a registered trademark for the fluoropolymer produced by E.I du Pond de Nemours & Company (Inc.) and Du Pond-Mitsui
Fluorochemicals Co., Ltd.

959
TL / TIL/TLM/TILM/TD/TID/TH/TIH Series
Tubing/Precautions
Be sure to read this before handling the products.

Selection Piping

Warning Caution
1. Confirm the specifications. 1. Preparation before piping
Products represented in this catalog are designed only for use Before piping is connected, it should be thoroughly blown out
in compressed air systems (including vacuum). with air (flushing) or washed to remove chips, cutting oil and
Do not operate at pressures or temperatures, etc., beyond the other debris from inside the pipe. Not allowing chips of the
range of specifications, as this can cause damage or malfunc- piping thread or the seal material to go in.
tion. (Refer to the specifications.)
2. In case of using the product for medical care
This product is designed for use with compressed air system
Air Supply
applications for medical care purposes. Do not use in contact
with human bodily fluids, body tissues or transfer applications Warning
to a human living body.
1. Types of fluid
This product is designed for use with compressed air.
Caution 2. In case of excessive condensation
1. Do not use in locations where the connecting Excessive condensation in a compressed air system may
threads and tubing connection will slide or rotate. cause pneumatic equipment to malfunction. Installation of an
The connecting threads and tubing connection will come apart air dryer, water separator before filter is recommended.
under these conditions. 3. Drain flushing
2. Use tubing at or above the minimum bending If condensation in the drain bowl is not emptied on a regular
radius. Using below the minimum bending radius basis, the bowl will overflow and allow the condensation to
enter the compressed air lines. It causes malfunction of
can cause breakage or flattening of the tubing. pneumatic devices.
3. Never use the tubing for anything flammable, explo- If the drain bowl is difficult to check and remove, installation of
sive or toxic such as gas, fuel gas, or cooling medi- a drain bowl with an auto drain option is recommended.
ums etc. For compressed air quality, refer to SMC’s “Air Cleaning
Equipment” catalog.
Because the contents may penetrate outward.
4. Use the fittings applicable to the tubing size.
Operating Environment
Mounting
Warning
Caution 1. Do not use in locations having an explosive atmo-
sphere.
1. Confirm model no., size, etc. before installing.
Check tubing for damage, gouges, cracks, etc.
2. Do not operate in locations where vibration or
impact occurs.
The fluoropolymer tubing do not have the model number
displayed on the product due to the resin material used. If 3. In locations near heat sources, block off radiated
tubing without a model label is mixed with other tubing which heat.
also does not have a model label, it is impossible to identify the
model. Please avoid mixing the products with other models
while it is being used and/or stored. Maintenance
2. When tubing is connected, consider factors such as
changes in the tubing length due to pressure, and
allow sufficient leeway.
Caution
1. Reform periodic inspections to check the following
3. Do not apply unnecessary forces such as twisting, problems and replace tubing, if necessary.
pulling, moment loads, etc. on fittings or tubing.
1) Cracks, gouges, wearing, corrosion
This will cause damage to fittings and will crush, burst or 2) Air leakage
release tubing. 3) Twists or crushing of tubing
4. Mount so that tubing is not damaged due to tangling 4) Hardening, deterioration, softening of tubing
and abrasion. 2. Do not repair or patch the replaced tubing or fittings
This can cause flattening, bursting or disconnection of tubing, for reuse.
etc.
3. When using insert or miniature fittings over a long
period, some leakage may occur due to age deterio-
ration of the materials. If any leakage is detected,
correct the problem by additional tightening.
If tightening becomes ineffective, replace the fittings with a
new product immediately.

960

Potrebbero piacerti anche