Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Products
Products Industries
Industries Support
Support Training
Training Community
Community Developer
Developer Partner
Partner About
About
Ask a Question Write a Blog Post Login
Former Member
SAP HANA | SAP Landscape Transformation | data provisioning | data replication | Database | database and technology | errors in slt
configuration | hana | migration
share
0 share
0 tweet share
Follow
Hi All,
This document is all about SAP ECC and SAP HANA Integration using SLT ( Data Provisioning Technique ).
In this document I am demonstrating the procedure to configure SLT and then testing the configuration by
creating Purchase Order in SAP ECC and see its reflection in SAP HANA which is near real-time replication.
Addition to this I have covered procedural steps of some activity which we may have to carry out if in case ECC
and HANA environment is not completely ready for establishing SLT configuration and in case of few possible
errors that usually comes in creation of SLT configuration .
II. Step-by-Step Procedure to configure SLT for Data Replication from SAP ECC System to SAP HANA system.
III. How to delete entries from ECC tables for eliminating Error in SLT Configuration Scenario.
I. Creation of RFC Connection – While configuring SLT in LTR Transaction we need to pass RFC connection. In
case their is no suitable RFC Connection available or their is issue with existing RFC Connections, we can easily
create RFC Connection to meet our requirement as follows –
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 1/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
So target Hostname is nothing but message server address of your ECC system which you can find out in rz10
Transaction
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 2/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
Click on display so you will find SAP System number and mshost id as mentioned below.
in Target Host enter your rdisp / mshost id i.e. ‘EHP7’and in System number enter SAPSYSTEM value i.e. ’07’
and than click on Enter, after that Target Host-name will appear and IP address associated to that mshost under
IP Address Field will appear.
4 . Under Logon Security tab fill in required fields and press Enter.
5 .Now click on Save . Hence RFC Connection with name ECC_SLT_HANA is created.
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 3/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 4/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
4. New configuration screen will appear fill in the required fileds and click on OK.
Note : Configuration Name will be the name of the schema in HANA studio where SAP ECC tables will be
replicated.
If any schema with specified Configuration name already exist then same schema will be used else new schema
will be created.
RFC Destination – Choose the RFC Connection which is being created i.e. ECC_SLT_HANA .
Specify Number of Data Transfer Jobs and Calculation Jobs according to availability of Jobs.
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 5/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
5. Connection is created with name – SYN_SLT_HANA. click on configuration name.
we can find the Status as Running that means SLT configuration is completed at this point.
7 . Go to HANA studio
As the SLT gets configured 3 ECC system tables DD02L, DD02T and DD08L gets replicated in HANA system.
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 6/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
These are the tables which stores meta data of ECC tables.
Select Table say LFA1 from Source Tables section and click on Add, table gets reflected in Selected tables
section.
click on Finish.
11. Now to Replicate transactional table say Purchase Order header and line item tables.
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 7/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
Select EKKO and EKPO tables from Source Tables section and Add them in Selected Section
Click on Finish.
12. So the EKKO And EKPO tables gets scheduled for replication.
13. After the tables get scheduled initially the tables get loaded with status executed .
14. the tables which is being replicated gets new status as ‘In Process’
Note : The loading / replicating table’s change of status from Scheduled to Execute and then In Process may
take longer time may be more than half an hour.
In this case we may suspend the replication tables which are already having status as ‘In Process’
however this may not be a best practice.
15. Now to see replication lets create an entry in ECC tables, go to transaction me21n to create Purchase Order
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 8/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
III. Error in SLT Configuration Scenario – When you have deleted existing configuration and you are trying to
create new configuration the error pops up saying ‘Not all configurations could be loaded due to data
inconsistencies‘ and ‘Source System is already used in different Configuration’.
What happens is, though you have deleted configuration in LTR transaction still System maintains some records
related to deleted configuration in some IUUC* tables so we need to delete those entries from the tables.
IUUC_REPL_MAP
IUUC_MT_HEADER
IUUC_REPL_CONPAR
IUUC_REPL_HDR
1. Go to Transaction SE16 and give table name and click on data preview
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 9/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
On this screen click on code, so you will get code in variable column under Variable 1 tab, than press on Edit
icon.
6. Replace ‘SHOW’ with ‘DELE’ and press enter and than press F8
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 10/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
7 . So we will get Delete Entry push button through which we can delete records from table.
By using this procedure have to delete all the records from above mentioned 4 tables.
Regards,
Danish
Alert Moderator
15 Comments
You must be Logged on to comment or reply to a post.
Former Member
Former Member
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 11/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
Hello Danish,
I have a landscape where I am doing reporting in BOBJ explorer using HANA live views, our DB has completely
migrated to HANA, in this case Do I still need SLT to refresh data in HANA Studio ECC tables ?
Former Member
Hi Danish,
Thank you for such a nice document. I followed the same steps as mentioned in this document.
and provided all the privileges as mentioned in that document to my database user.
I am using a database user “NAVEEN”. Could you please let me know if i have to provide any other privileges.
Thank you,
Navn
Former Member
Hi Naveen,
It looks like the database user “NAVEEN” is missing object privileges at schema level. Please check
the authorization at HANA side for schema Z_N_SHM10.
Regards,
Prem Kumar M
Former Member
Can you explain if SLT is installed in same source system what is the configuration to be followed?
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 12/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
Former Member
Former Member
Hi Danish,
A small doubt, Can multiple SLT Configurations be done in LTR Tcode , with different names and different sets of
tables for replication under it, which could result in multiple Schema in HANA Studio ??
Regards,
Suraj Kant
Former Member
Hello Suraj,
that is right no of the the connections created in SLT do have the indicidual schemas in HANA system
unless during the replication configuration you intentionally give the same schema name which is
already existing,.
amar ghuge
Former Member
Excellent Blog,
It is one of best post in regarding SLT configuration, particularly detailed touch in potential and practical trouble
shooting topics.
– never missed ‘sensitive check and setting in ECC’ such as SM59, RZ10
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 13/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
Former Member
Former Member
Nice blog… and covers not only step by step procedures but also provides good trouble shooting information..
Thomas Taylor
Does anyone have step-by-step document for changing the SYSTEM user id to a different userid on existing SLT
DB Connection?
Thanks,
Tom T
Former Member
Hello Danish,
I have a customer with an SAP ECC landscape where there are two company codes, The company of one of the
two company codes has been sold and will have to migrate its data into a new ERP. The solution I wanted to
propose is adopt SLT but I have a doubt if it is usable when the source is SAP ECC and the target is SAP S/4
HANA.
Best Regards
Angelo
Crystal Waston
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 14/15
9/30/2018 SLT Configuration for Data Replication from SAP ECC System to SAP HANA System | SAP Blogs
August 18, 2017 at 4:26 am
SAP HANA Replication allows migration of data from source systems to SAP HANA database. Simple way to
move data from existing SAP system to HANA is by using various data replication techniques.
david nguyen
Hi Danish, thank you for great blog. I have tried to follow your blog, but the data did not replicate to the Hana
database. Do you have any ideas?
Thanks
David
Sitemap Newsletter
https://blogs.sap.com/2015/04/17/slt-configuration-for-data-replication-from-sap-ecc-system-to-sap-hana-system/ 15/15