Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Visit examrace.com for free study material, doorsteptutor.com for questions with detailed explanations, and "Examrace" YouTube channel for free
videos lectures
Examrace Login &
▶ Examrace 289K Manage
a. True, because being majority carrier devices, MOSFETs are voltage driven
c. False, because it can be operated both as current source Inverter (CSI) or a VSI
Answer: d
2. A single phase full-wave half controlled bridge converter feeds an inductive load. The two
SCRs in the converter are connected to a common DC bus. The converter has to have a free
wheeling diode [GATE-2007]
a. because the converter inherently does not provide for free wheeling
b. Because the converter does not provide for free wheeling for high values of triggering
angles
c. Or else the free wheeling action of the converter will cause shorting of the AC supply
d. Or else if a gate pulse to one of the SCRs is missed, it will subsequently cause a high
load current in the other SCR
Answer: b
3. The power electronic converter shown in the figure has a single pole double throw switch.
The pole P of the switch is connected alternately to throws A and B. The converter shown
is a [GATE-2010]
1 of 2
8/1/2018----Competitive Exams: Electronics MCQs (Practice Test 12 of 13)- Translation in Hindi, Kannada, Malayalam, Marathi, Punjabi, Sindhi, Sindhi,
Tamil, Telgu - Examrace----Downloaded from examrace.com
Visit examrace.com for free study material, doorsteptutor.com for questions with detailed explanations, and "Examrace" YouTube channel for free
videos lectures
a. Step down chopper (buck converter)
b. Half-wave rectifier
Answer: a
4. The fully controlled thyristor converter in the figure is fed from a single-phase source.
When the firing angle is 0° the dc output voltage of the converter is 300 V. What will be
the output voltage for a firing angle of 60° assuming continuous conduction? [GATE-
2010]
a. 150V
b. 210V
c. 300V
d. 100 (pi) V
Answer: a
2 of 2