Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
FEATURES
High Ripple Rejection 75dB typ. (f=1kHz,3V Version)
Output Noise Voltage Vno=45µVrms typ. (Vo=3V Version)
Output capacitor with 2.2µF ceramic capacitor (Vo≥2.6V)
Output Current Io(max.)=800mA
High Precision Output Vo ±1.0%
Low Dropout Voltage 0.18V typ. (Io=500mA)
ON/OFF Control (NJM2846)
Internal Short Circuit Current Limit
Internal Thermal Overload Protection
Bipolar Technology
Package Outline TO-252-3 (NJM2845DL1), TO-252-5 (NJM2846DL3)
PIN CONFIGURATION
2 3 1.CONTROL
1.VIN
2.GND 2.VIN
3.VOUT 3.GND
4.Vo
1 3 5.NC
123 45
NJM2845DL1 NJM2846DL3
EQUIVALENT CIRCUIT
GND GND
NJM2845DL1 NJM2846DL3
Ver.2008-02-06 -1-
NJM2845/46
OUTPUT VOLTAGE
Device Name VOUT
NJM284*DL*-15 1.5V
NJM284*DL*-18 1.8V
NJM284*DL-*02 2.0V
NJM284*DL*-22 2.2V
NJM284*DL*-23 2.3V
NJM284*DL*-25 2.5V
NJM284*DL*-03 3.0V
NJM284*DL*-33 3.3V
NJM284*DL*-04 4.0V
NJM284*DL*-05 5.0V
Output voltage options available : 1.5 ~ 5.0V (0.1V step)
ELECTRICAL CHARACTERISTICS
(VIN=Vo+1V, CIN=0.33µF ,Co=2.2µF(1.7V<Vo≤2.6V:Co=4.7µF, Vo≤1.7V: Co=10µF), Ta=25°C)
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Output Voltage Vo Io=30mA -1.0% - +1.0% V
Quiescent Current IQ Io=0mA - 400 600 µA
Output Current Io Vo - 0.3V 800 1050 - mA
Line Regulation ∆Vo/∆VIN VIN=Vo+1V ∼ Vo+6V, Io=30mA - - 0.10 %/V
Load Regulation ∆Vo/∆Io Io=0 ∼ 800mA - - 0.004 %/mA
Dropout Voltage(*2) ∆VI -O Io=500mA - 0.18 0.28 V
ein=200mVrms, f=1kHz, Io=10mA,
Ripple Rejection RR - 75 - dB
Vo=3V Version
Average Temperature
Coefficient of Output ∆Vo/∆Ta Ta=0 ∼ 85°C, Io=10mA - ± 50 - ppm/°C
Voltage
f=10Hz ∼ 80kHz, Io=10mA,
Output Noise Voltage VNO - 45 - µVrms
Vo=3V Version
(*2): The output voltage excludes under 2.3V.
The above specification is a common specification for all output voltages.
Therefore, it may be different from the individual specification for a specific output voltage.
-2- Ver.2008-02-06
NJM2845/46
POWER DISSIPATION vs. AMBIENT TEMPERATURE
NJM2845DL1
(Topr=-40~+85°C,Tj=+150°C,PD=10W(TC≤25°C),PD=1W(Ta≤25°C))
12
10
Power Dissipation PD(W)
∞ Heat Sink
8 θHS=5°C/W
θHS=10°C/W
6
θHS=20°C/W
4
0
-50 -25 0 25 50 75 100
Ambient Temperature Ta(°C)
TEST CIRCUIT
IIN
A VIN VOUT
IOUT V VOU
VIN NJM2845 *3
0.33µF 2.2µF
(ceramic)
GND
TYPICAL APPLICATION
NJM2845 2.2µF *4
0.33µF
GND
Ver.2008-02-06 -3-
NJM2845/46
NJM2846
ELECTRICAL CHARACTERISTICS
(VIN=Vo+1V, CIN=0.33µF, Co=2.2µF(1.7V<Vo≤2.6V version: Co=4.7µF, Vo≤1.7V: Co=10µF), Ta=25°C)
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Output Voltage Vo Io=30mA -1.0% - +1.0% V
Quiescent Current IQ Io=0mA - 400 600 µA
Quiescent Current
IQ (OFF) VCONT=0V - - 100 nA
at Control OFF
Line Regulation Io Vo - 0.3V 800 1050 - mA
Line Regulation ∆Vo/∆VIN VIN=Vo+1V ∼ Vo+6V, Io=30mA - - 0.10 %/V
Load Regulation ∆Vo/∆Io Io=0 ∼ 800mA - - 0.004 %/mA
Dropout Voltage(*5) ∆VI -O Io=500mA - 0.18 0.28 V
ein=200mVrms, f=1kHz, Io=10mA,
Ripple Rejection RR - 75 - dB
Vo=3V Version
Average Temperature
Coefficient of Output ∆Vo/∆Ta Ta=0 ∼ 85°C, Io=10mA - ± 50 - ppm/°C
Voltage
f=10Hz ∼ 80kHz, Io=10mA,
Output Noise Voltage VNO - 45 - µVrms
Vo=3V Version
Control Current ICONT VCONT=1.6V, Io=0mA - 3 12 µA
Control Voltage for ON-state VCONT(ON) 1.6 - - V
Control Voltage for OFF-state VCONT(OFF) - - 0.6 V
(*5): The output voltage excludes under 2.3V.
The above specification is a common specification for all output voltages.
Therefore, it may be different from the individual specification for a specific output voltage.
NJM2846DL3
(Topr=-40~+85°C,Tj=+150°C,PD=10W(TC≤25°C),PD=1W(Ta≤25°C))
12
10
Power Dissipation PD(W)
∞ Heat Sink
8 θHS=5°C/W
θHS=10°C/W
6
θHS=20°C/W
4
0
-50 -25 0 25 50 75 100
Ambient Temperature Ta(°C)
-4- Ver.2008-02-06
NJM2845/46
TEST CIRCUIT
IIN
A VIN VOUT
IOUT V VOU
VIN NJM2846
0.33µF 2.2µF *6
(ceramic)
ICONT
A CONTROL
GND
V VCONT
Ver.2008-02-06 -5-
NJM2845/46
TYPICAL APPLICATIONS
1 In the case where ON/OFF Control is not required:
0.33µF
NJM2846 2.2µF *7
R
(0∼300kΩ)
CONTROL
GND
NJM2846 2.2µF *7
0.33µF
R
CONTROL
GND
-6- Ver.2008-02-06
NJM2845/46
Input Capacitance CIN
Input capacitance CIN is required to prevent oscillation and reduce power supply ripple for applications with high
power supply impedance or a long power supply line.
Use the CIN value of 0.33µF greater to avoid the problem.
CIN should connect between GND and VIN as short as possible.
Output Capacitance CO
Output capacitor (Co) is required for a phase compensation of the internal error amplifier. The capacitance and the
equivalent series resistance (ESR) influences stability of the regulator.
This product is designed to work with a low ESR capacitor for the Co; however, use of recommended capacitance or
greater value is essential for stable operation.
Use of a smaller Co may cause excess output noise or oscillation of the regulator due to lack of the phase
compensation.
Therefore, use Co with the recommended capacitance or greater value and connect between Vo terminal and GND
terminal with minimal wiring. The recommended capacitance depends on the output voltage. Low voltage regulator
requires greater value of the Co. Thus, check the recommended capacitance for each output voltage.
Use of a greater Co reduces output noise and ripple output, and also improves transient response of the output
voltage against rapid load change.
Ver.2008-02-06 -7-
NJM2845/46
TYPICAL CHARACTERISTICS (NJM2845)
NJM2845_3.0V
Output Voltage vs. Input Voltage NJM2845_3.0V
3.3 Output Voltage vs. Output Current
4
o
@:Ta=25 C
Co=2.2µF(Ceramic)
3.5
3.2
3
Output Voltage : Vo(V)
3.1
1.5
2.9
2.8 Io=200mA
o
0.5 @:Ta=25 C
V IN=4V
Io=500mA Co=2.2µF(Ceramic)
2.7 0
2.7 2.8 2.9 3 3.1 3.2 3.3 0 500 1000 1500 2000
Input Voltage : VIN(V) Output Current : Io(mA)
NJM2845_3.0V
NJM2845_3V
Ground Pin Current vs. Output Current
35 Dropout Voltage vs. Output Current
0.35
o
@:Ta=25 C
Co=2.2µF(Ceramic)
30
0.3
Ground Pin Current : IGND (mA)
25 0.25
Dropout Voltage:dVI-O (V)
20 0.2
15 0.15
10 0.1
5 @:Ta=25 oC 0.05
V IN=4.0V
Co=2.2µF(Ceramic)
0 0
0 200 400 600 800 1000 0 200 400 600 800 1000
Output Current : IO(mA) Output Current:Io(mA)
NJM2845_3.0V NJM2845_3.0V
Load Regulation vs. Output Current Peak Output Current vs. Input Voltage
0 2500
-10
2000
Load Regulation : dVo/dIo(mV)
-20
Peak Output Current : IoMAX(mA)
-30
1500
-40
1000
-50
-60
500
-70 @:Ta=25 oC
V IN=4.0V @:Ta=25oC
Co=2.2µF(Ceramic) Co=2.2µF(Ceramic)
-80 0
0 200 400 600 800 1000 4 6 8 10 12 14
Output Current : Io(m A) Input Voltage : VIN(V)
-8- Ver.2008-02-06
NJM2845/46
TYPICAL CHARACTERISTICS (NJM2845)
NJM2845_3.0V
NJM2845_3.0V
Quiescent Current vs. Input Voltage
Output Noise Voltage vs. Output Current
100
2500
o @:Ta=25oC
@:Ta=25 C
V IN=4.0V
Output is open.
LPF:80kHz
Co=2.2µF(Ceramic)
80 Co=2.2µF(ceramic)
2000
1500 60
1000 40
500 20
0 0
0 5 10 15 0.001 0.01 0.1 1 10 100 1000
Input Voltage : VIN(V) Output Current : Io(mA)
NJM2845_3.0V NJM2845_3V
Ripple Rejection Ratio vs. Frequency Ripple Rejection vs. Output Current
100 100
Io=10mA Io=0mA
90 90
f=1kHz
Ripple Rejection Ratio : RR (dB)
80 80
Ripple Rejection : RR (dB)
70 70
f=10kHz
60 60
Io=30mA
Io=100mA
50 50
40
40
o o
@:Ta=25 C @:Ta=25 C
V IN=4V 30 V IN=4V
30
ein=200mVrms ein=200mVrms
Co=2.2µF(Ceramic) Co=2.2µF(Ceramic)
20 20
10 100 1k 10k4 100k 0.001 0.01 0.1 1 10 100 1000
10 100 1000 10 105
Frequency : f (Hz) Output Current : Io(mA)
NJM2845_3.0V
Equivalent Serise Resistance vs. Output Current
100
@:Ta=25oC
Co=2.2µF(Ceramic)
V IN=4.0V
Equivalent Serise Resistance : ESR(Ω)
10
STABLE REGION
1
0.1
0.02
0.001 0.01 0.1 1 10 100 103
Output Current : Io(m A)
Ver.2008-02-06 -9-
NJM2845/46
TYPICAL CHARACTERISTICS (NJM2845)
NJM2845_3.0V
NJM2845_3.0V
Output Voltage vs. Temperature
Dropout Voltage vs. Temperature 3.1
0.4
Io=500mA
Co=2.2µF(Ceramic)
0.35
3.05
0.3
Dropout Voltage:dVI-O (V)
0.2 3
0.15
0.1 2.95
0.05 @:VIN=4.0V
Io=30mA
Co=2.2µF(Ceramic)
0 2.9
-50 0 50 100 150 -50 0 50 100 150
o o
Temperature : Ta ( C) Temperature : Ta ( C)
NJM2845_3.0V NJM2845_3.0V
Quiescent Current v.s. Input Voltage Short Circuit Current v.s. Temperature
600 1000
@:VIN=4.0V @:VIN=4.0V
Output is open. Co=2.2µF(Ceramic)
Co=2.2µF(Ceramic) Output is short to ground.
500
800
Short Circuit Current : Isc (mA)
Quiescent Current : IQ (mA)
400
600
300
400
200
200
100
0 0
-50 0 50 100 150 -50 0 50 100 150 200
o
Temperature : Ta ( C) Temperature : Ta (oC)
NJM2845_3.0V NJM2845_3.0V
Line Regulation vs. Temperature Load Regulation vs. Temperature
0.1 0.03
@:V IN=4.0V
Io=0-800mA
Co=2.2µF(Ceramic)
0.025
Load Regulation : dVo/dIo(%/mA)
0.05
Line Regulation : dVo/dIo(%/V)
0.02
0 0.015
0.01
-0.05
0.005
@:VIN=4.0-9.0V
Io=30mA
Co=2.2µF(Ceramic)
-0.1 0
-50 0 50 100 150 -50 0 50 100 150
o o
Temperature : Ta ( C) Temperature : Ta ( C)
- 10 - Ver.2008-02-06
NJM2845/46
TYPICAL CHARACTERISTICS (NJM2845)
NJM2845_3.0V NJM2845_3.0V
Peak Output Current vs. Input Voltage Output Voltage vs. Temperature
2000 4
3.5
1500 3
Peak Output Current : IoMAX(mA)
1000 2
1.5
500 1
0.5 @:VIN=4.0V
@:Ta=25 oC Io=30mA
Co=2.2µF(Ceramic) Co=2.2µF(Ceramic)
0 0
-50 0 50 100 150 -50 0 50 100 150 200
o o
Temperature : Ta ( C) Temperature : Ta ( C)
NJM2845_3V NJM2845_3V
Line Transient Response Load Transient Response
3.1 6 3.25 900
3 1 3 400
Output Voltage
Ver.2008-02-06 - 11 -
NJM2845/46
TYPICAL CHARACTERISTICS (NJM2846)
NJM2846_3.0V
Output Voltage vs. Input Voltage NJM2846_3.0V
3.3 Output Voltage vs. Output Current
4
o
@:Ta=25 C
Co=2.2µF(Ceramic) @:Ta=25oC
V IN=4.0V
3.2 3.5
Co=2.2µF(Ceramic)
3
3.1
Output Voltage : Vo(V)
1.5
2.9
1
Io=200mA
2.8
0.5
Io=500mA
2.7 0
2.7 2.8 2.9 3 3.1 3.2 3.3 0 500 1000 1500 2000
Input Voltage : VIN(V) Output Current : Io(mA)
NJM2846_3.0V NJM2846_3.0V
Ground Pin Current v.s. Output Current
Dropout Voltage vs. Output Current
35 0.35
o
@:Ta=25 C
Co=2.2µF(Ceramic)
30 0.3
Ground Pin Current : IGND (mA)
25 0.25
Dropout Voltage:dVI-O (V)
20 0.2
15 0.15
10 0.1
o 0.05
5 @:Ta=25 C
VIN=4.0V
Co=2.2µF(Ceramic)
0 0
0 200 400 600 800 1000 0 200 400 600 800 1000
Output Current : IO(mA) Output Current:Io(mA)
NJM2846_3.0V NJM2846_3.0V
Control Current vs. Control Voltage Output Voltage vs. Control Voltage
60 3.5
@:Ta=25oC
V IN=4.0V
Co=2.2µF(Ceramic) 3
50 Io=30mA
Rc=0Ω
2.5
(µA)
40
Output Voltage : Vo(V)
Cont
2 Rc=50kΩ
Control Current : I
30
1.5
Rc=0Ω Rc=100kΩ
20 Rc=50kΩ
Rc=100kΩ
1
o
@:Ta=25 C
10 V IN=4.0V
0.5 Co=2.2µF(Ceramic)
Io=30mA
0 0
0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 1.5 2 2.5 3
Control Voltage : V (V) Control Voltage : V (V)
Cont Cont
- 12 - Ver.2008-02-06
NJM2845/46
TYPICAL CHARACTERISTICS (NJM2846)
NJM2846_3.0V NJM2846_3.0V
Load Regulation vs. Output Current Peak Output Current vs. Input Voltage
2500
0
-10
2000
-30 1500
-40
1000
-50
-60
500
@:Ta=25 oC
-70 VIN=4.0V o
@:Ta=25 C
Co=2.2µF(Ceramic) Co=2.2µF(Ceramic)
-80 0
0 200 400 600 800 1000 4 6 8 10 12 14
Output Current : Io(mA) Input Voltage : VIN(V)
NJM2846_3.0V NJM2846_3.0V
Quiescent Current v.s. Input Voltage Output Noise Voltage vs. Output Current
2500 100
@:Ta=25oC o
Output is open. @:Ta=25 C
Co=2.2µF(Ceramic) V IN=4.0V
including Icont LPF:80kHz
2000 80 Co=2.2µF(ceramic)
Output Noise Voltage : Vn(µVrms)
Quiescent Current : IQ (µA)
1500 60
1000 40
500 20
0 0
0 5 10 15 0.001 0.01 0.1 1 10 100 1000
Input Voltage : VIN(V) Output Current : Io(mA)
NJM2846_3.0V NJM2846_3.0V
Ripple Rejection Ratio v.s. Frequency Ripple Rejection vs. Output Current
100
100
Io=0mA f=10kHz
90 90
Io=10mA
80 80
Ripple Rejection : RR (dB)
Ripple Rejection : RR (dB)
70 70 f=1kHz
60 60
Io=30mA
Io=100mA
50 50
40 40
o
@:Ta=25 C @:Ta=25oC
VIN=4.0V 30 V IN=4.0V
30
ein=200mVrms ein=200mVrms
Co=2.2µF(Ceramic) Co=2.2µF(Ceramic)
20 20
10 100 1k 10k 100k 0.001 0.01 0.1 1 10 100 1000
Frequency : f (Hz) Output Current : Io(mA)
Ver.2008-02-06 - 13 -
NJM2845/46
TYPICAL CHARACTERISTICS (NJM2846)
NJM2846_3.0V
Equivalent Serise Resistance vs. Output Current
100
@:Ta=25oC
V IN=4.0V
Co=2.2µF
Equivalent Serise Resistance : ESR(Ω )
10
STABLE REGION
1
0.1
0.02
3
0.001 0.01 0.1 1 10 100 10
Output Current : Io(m A)
NJM2846_3.0V
NJM2846_3.0V
Output Voltage vs. Temperature
Dropout Voltage vs. Output Current 3.1
0.4
Io=500mA
Co=2.2µF(Ceramic)
0.35
3.05
0.3
Dropout Voltage:dVI-O (V)
0.25
0.2 3
0.15
0.1 2.95
0.05 @:VIN=4.0V
Io=30mA
Co=2.2µF(Ceramic)
0 2.9
-50 0 50 100 150 -50 0 50 100 150
o o
Temperature : Ta ( C) Temperature : Ta ( C)
NJM2846_3.0V NJM2846_3.0V
Control Voltage v.s. Temperature Control Current v.s. Temperature
2 10
@:V IN=4.0V
@:VIN=4V
Io=30mA
Output is open
Co=2.2µF(Ceramic)
Co=2.2µF(Ceramic)
8 V CONT=1.6V
1.5
Control Voltage :Vcont-off [V]
0.5
2
0 0
-50 0 50 100 150 -50 0 50 100 150
o o
Temperature : Ta ( C) Temperature Ta ( C)
- 14 - Ver.2008-02-06
NJM2845/46
TYPICAL CHARACTERISTICS (NJM2846)
NJM2846_3.0V NJM2846_3.0V
Quiescent Current v.s. Input Voltage Short Circuit Current v.s. Temperature
600 1000
@:VIN=4.0V @:VIN=4.0V
Output is open. Co=2.2µF(Ceramic)
Co=2.2µF(Ceramic) Output is short to ground.
500
800
400
600
300
400
200
200
100
0 0
-50 0 50 100 150 -50 0 50 100 150
o
Temperature : Ta ( C) Temperature : Ta (oC)
NJM2846_3.0V NJM2846_3.0V
Line Regulation vs. Temperature Load Regulation vs. Temperature
0.1 0.03
@:V IN=4.0V
Io=0-800mA
Co=2.2µF(Ceramic)
0.025
Load Regulation : dVo/dIo(%/mA)
0.05
Line Regulation : dVo/dIo(%/V)
0.02
0 0.015
0.01
-0.05
0.005
@:VIN=4.0-9.0V
Io=30mA
Co=2.2µF(Ceramic)
-0.1 0
-50 0 50 100 150 -50 0 50 100 150
o o
Temperature : Ta ( C) Temperature : Ta ( C)
NJM2846_3.0V NJM2846_3.0V
Peak Output Current v.s. Temperature Output Voltage vs. Temperature
2000 4
@:VIN=4.0V
Co=2.2µF(Ceramic)
3.5
Peak Output Current: Io_peak (mA)
1500 3
Output Voltage : Vo(V)
2.5
1000 2
1.5
500 1
0.5 @:VIN=4.0V
Io=30mA
Co=2.2µF(Ceramic)
0 0
-50 0 50 100 150 -50 0 50 100 150 200
o
Temperature : Ta ( C) Temperature : Ta (oC)
Ver.2008-02-06 - 15 -
NJM2845/46
TYPICAL CHARACTERISTICS (NJM2846)
NJM2846_3.0V NJM2846_3.0V
ON/OFF Transient Response without Load ON/OFF Transient Response with Load
7 10 7 10
6 5 6 5
Control Voltage Control Voltage
5 0 5 0
2 -15 2 -15
1 @:Ta=25 C
o -20 1 o
@:Ta=25 C -20
VIN=4.0V VIN=4.0V
0 Co=2.2µF(Ceramic) -25 0 Co=2.2µF(Ceramic) -25
Io=0mA Io=30mA
-1 -30 -1 -30
0 1 2 3 4 5 0 4 8 12 16 20
Time : t [S] Time : t [mS]
NJM2846_3V NJM2846_3V
Line Transient Response Load Transient Response
3.1 6 3.25 900
3 1 3 400
Output Voltage
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
- 16 - Ver.2008-02-06