Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Figure 4
Figure 3 Figure 5 1m 5m
5. A 7/8 inch diameter bolt having a diameter at the root of the threads of 0.731 inch is used to fasten two timbers
together as shown. The nut is tightened to cause a tensile strength of 18,000 psi in the bolt. Determine the outside
diameter of the washers if their inside diameter is 9/8 inches and the bearing stress is limited to 800 psi.
a. 3.18 in. b. 3.65 in c. 4.1 in d. 4.3 in.
6. Determine the position of maximum moment in the beam ABC.
a. at A b. at B c. at C d. left of C
7. In how many different orders can 7 books be arranged on a shelf if this 3-volume work is not merely not to be
separated but must be kept in the proper order.
a) 720 b) 120 c) 5040 d) 4050
8. Water is pouring into a swimming pool. After t hours, there are t+ t1/2 gallons in the pool. At what rate is the water
pouring into the pool when t = 9 hours?
a. 7/6 gph b. 1 gph c. ½ gph d. 1/6 gph
9. The area enclosed by the ellipse x2/9 + y2/4 =1 is revolved about the line x=3. What is the volume generated?
A. 355.3 B. 360.1 C.370.3 D.365.1
10. The total surface of two cubes is 150 sq. m, The total length of their edges is 84 cm. Find the edge of the larger
cube.
a. 4 b. 5.5 c. 6.4 d. 7.2
11. Glycerin has an index of reaction of 1.47. Find the focal length in glycerin of a lens made of flint glass(n= 1.63)
whose focal length in air is 10 cm.
a. 11 cm b. 23 cm c. 39 cm d. 58 cm
12. Find the integrating factor for the equation (x2+y2 – x)dx –ydy = 0
a. 1/(x+y) b. y/(x+y) c. 1/(x2+y2) d. 1/x2 e. 1/y2
13. The equation of a circle on the y-axis and passes through the origin and the point (4,2) is
a. x2 + y2 - 10y = 0 c. x2 + y2 - 10x = 0
2 2
b. x + y - 10x + 10y = 0 d. x2 + y2 + 10y = 0
14. Two forces PQ and PR of magnitudes 5.0 kg and 8.0 kg, respectively, acts at a point P. The direction of PQ is
N20ºE, and the direction of PR is N65ºE. Approximate the magnitude and direction of the resultant PS.
a) 11.2 kg, N42oE b) 12.1 kg, N48oE c) 14.1 kgN73oE d) 15.1 kg.N27oE
15. A particle moves according to the following function of time: x(t) = 3sint and y(t) = 4 cost, what is the resultant
velocity at t= pi?
a. 3 b. 4 c. 9 d. 25
16. Find the distance between point A (3, 4) and the line 5x + 12y – 10 = 0
a. 43/13 b. 53/13 c. 63/13 d. 73/13
17. A nominal rate of 9.5% has an equivalent effective rate of 9.84%. What is the compounding period?
a) monthly b) bi-monthly c) quarterly d) semi- annually
18. Given part of an arithmetic sequence ( -312, ___, ___, -174) and t50 = 1160, what is the value of the 26 th term?
a. 48 b. 56 c. 67 d. 74
19. A square and a regular hexagon have the same perimeter. If the area of the square is 2.25, what is the area of the
hexagon?
a. 2.250 b. 2.598 c. 2.838 d. 3.464
20. A steel beam in a bridge extends 25 m across a small stream. What is the change in length from the winter, when
the temperature is 20 C, to the summer when it is 37 C. The coefficient of linear expansion of steel is 12x10 -6/ C .
a. 17mm b. 19 mm c. 21mm d. 23 mm
21. At a temperature of 80°C, a steel tire 12 mm thick and 90 mm wide that is to be shrunk onto a locomotive driving
wheel 2 m in diameter just fits over the wheel, which is at a temperature of 25°C. Determine the contact pressure
between the tire and wheel after the assembly cools to 25°C. Neglect the deformation of the wheel caused by the
pressure of the tire. Assume α = 11.7 x 10 –6 m /(m·°C) and E = 200 Gpa.
a. 1.54 MPa b. 1.96 MPa c. 2.24 MPa d. 2.86 MPa
F
8 FT
Figure 24 W
Figure 22
4 FT
Figure 23
22. A rigid horizontal bar of negligible mass is connected to two rods as shown in the figure above. If the system is
initially stress-free. Calculate the temperature change that will cause a tensile stress of 90 MPa in the brass rod.
Assume that both rods are subjected to the change in temperature.
a. 35.5˚C b. 42.08˚C c. 56.01˚C d. 60.2˚C
23. A tube 2 mm thick has the shape shown in the figure. Find the shearing stress caused by a torque of 600 N·m.
a. 78.4 MPa b. 81.92 MPa c. 83.67 MPa d. 84.35 MPa
24. A cylindrical tank is set at rest as shown. What force, F, should be applied horizontally at point C to raise the tank?
a. 25.4 lbf b. 57.7 lbf c. 66.7 lbf d. 100 lbf
25. It is known that y(x) passes through the points (0,2) and (1,4). Solve for y(x) if the second derivative is: (d 2y/dx2)
=1
a. Y= X2 + 3X + 4 b. 2Y= X2 + 3X + 2 c. 6Y= 3X2 + 4X + 1 d. NOTG
26. If x increases uniformly at the rate of 0.001 feet per second, at what rate is the expression (1+x)3 increasing when x
becomes 9 feet?
a. 0.001 cfs b. 0.3 cfs c. 0.003 cfs d. 1.003 cfs
27. An archeologists discovered some ancient objects which had organic remains. He found that 60% of the original
amount of C – 14 remains and the disappearance of C-14 obeys the first-order decay law, give an estimation for the
age of the objects given the half life of C14 is approximately 5600 years, determine the age of the fossil.
a. 4127. 01 yrs. b.4205.6 yrs. c. 4569.5 yrs. d. NOTG
28. Divide the number 60 into two parts so that the product (P) of one part with the square of the other part is a
maximum.
a. 30, 30 b. 25, 35 c. 50, 10 d. 40, 20
29. How many different committees of 5 can be selected from 15 Juniors and 10 Seniors if it must contain at least 3
Juniors?
a) 20475 b) 37128 c) 24075 d) 73128
30. An open box is made from a square piece of cardboard (of side 1) by cutting out four equal (small squares) at the
corners and then folding. How big should the small squares be in order that the volume of the box be as large as
possible?
a. 1/8 b. 1/10 c. 1/6 d. NOTG
31. A rifle with a muzzle velocity of 200m/s is fired with its barrel horizontal at a height of 1.5 m above the ground.
How far away from the rifle does the bullet strike the ground?
a. 100 m b. 110 m c. 120 m d. 130 m
32. Given : dy1/dx = (2/13) (1+ 5/2 x - 3/2 – ¾ k), What is the value of k such that y1 is perpendicular to the curve y2
= 2x at (1,1)
a. 3 b. 6 c. 7 d. 10
33. If it is known that y = 1 when x =1, what is the constant of integration for the following integral? y(x) = ∫( e2x-
2x) dx
a. e2+2 b. ½ e2x + 1 c. ½ e2 + 2 d. NOTG
34. If a cube has an edge of length 2, what is the distance from any vertex to the center of the cube?
a. (2) 1/2/2 b. (3)1/2 c. 2(2)1/2 d. 2(3)1/2
35. A parabola has its focus at (7, -4) and directrix Y = 2. Find the equation
a. X2 + 12X – 14Y + 61 = 0 b. X2 + 14X – 12Y + 61 = 0
c. X2 – 12X + 14 Y + 61 = 0 d. X2 – 14X + 12 Y + 61 = 0
36. In how many ways can one make a selection of 4 black balls, 5 red balls, and 2 white balls from a box containing 8
black balls, 7 red balls and 5 white balls?
a) 14700 b) 17400 c) 47100 d) 10740
37. A certain ball always rebounds to 4/5 of the distance of the previous fall. Suppose it is dropped from a height of
400 meters, what is the total distance it has traveled up and down when it hits the ground for the fourth time?
a. 534.8 meters b. 895.8 meters c. 1235.5 meters d. 1961.6 meters
38. The rigid platform in the figure has negligible mass and rests on two steel bars, each 250.00 mmm long. The center
bar is aluminum and 249.90 mm long. Compute the stress in the steel bar after the center load P=400 kN has been
applied. For each steel bar, the area is 1200 mm2 and E = 200 Gpa. For the Al bar, the area is 2400 mm2 and E=70
GPa.
a. 22.5 MPa b. 25.4 MPa c. 32.1 MPa d. NOTG
Figure Figure 40.
38.
8 ft.
8 ft.
2P P
Figure 39 8 ft.
10 ft
2” 30º
8
ft
78. The beam is supported by a cable and is loaded as shown. What is the tension in the cable?
a. 200 lbf b. 250 lbf c. 430 lbf d. 500 lbf
79. Determine the moment of inertia around the centroidal axis of the beam.
a. 416 in4 b. 650 in4 c. 735 in4 d. 1067 in4
80. A scissor jack is used to raise a car. If the jack supports a weight of 2000 lbf, determine the force in member BE.
a. 0 lbf b. 500(3)1/2 lbf c. 1000(3)1/2 lbf d. 2000(3)1/2 lbf