Sei sulla pagina 1di 8

AIRPORTS AUTHORITY OF INDIA, CATC ALLAHABAD

Roll No…..………………
Signature ………………….
--------------------------------------------------------------------------------------------------------------------------------
GROUP A : MULTIPULE CHOICE [43]

1. The use of three letter designators as ‘YYY’ indicates that


a) Message is addressed to aircraft in flight
b) Message is addressed to military organization
c) Message is addressed to an organization not allocated a designator on an
exclusive basis
d) None of the above, rather YYY will not be used in Address Indicator

2. Which of the following restriction will apply on three letter designator –


a) Combination of ZC or CZ to avoid conflict with the SOM
b) Combination of NN to avoid conflict with the EOM
c) PAN will not be used
d) All of the above

3. The three letter designator for Government Civil Aviation Authority/DGCA is –


a) YFY b) YTY c) YSY
d) YAY

4. The three letter designators are available in ICAO Documents –


a) Doc 7910 b) Doc 8585 c) Doc 8400 d) Annex 10 –
Volume II

5. Which of the following is a complete AFTN message ?


a) Channel Check transmission
b) Test Transmission
c) Service Message Transmission
d) All of the above

6. The Maximum number of addresses to which an AFTN message can be transmitted at


a time in ECIL AMSS is –
a) 21 b) 7 c) 63 d) No restriction

7. Mumbai Area Control Centre (ACC) has originated a distress message to Delhi Area
Control Centre (ACC) under THI 190300. The acknowledge issued by Delhi AMSS will
have text as :
a) R 190300 VABBZRZX c) R 190300 VABBYFYX
b) SVC R 190300 VABBZRZX d) R 190300 VIDPYFYX

8 The DATABASE server is used in ECIL AMSS for


a) Storing the service messages
b) Booting and loading the operating system
c) Programming development activities
d) Storing text of specific messages for query purpose

9. Which is not a location indicator


a) OAKN b) JRTB c) FVHA d) YSSY

10. The Frontend and Backend positions are connected through


a) MODEM c) LTU
b) SQL Server d) Ethernet Switch

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CATC/AMSS/Ops-14 Page 1 of 8
AIRPORTS AUTHORITY OF INDIA, CATC ALLAHABAD
Roll No…..………………
Signature ………………….
--------------------------------------------------------------------------------------------------------------------------------

11 For Aircraft Identification, maximum characters that can be used in a Flight Plan are
(a) 8 b)7 c) 6 d) 9

12. Acknowledgement of a distress message shall be sent under


a) SS priority c) FF priority
b) DD priority d) KK priority

13. Which of the following menus of ECIL Frontend applications’ main screen may be used to
view the users logged in ‘Booking’ workstaions ?
a) Hfrt b) Stats c) Adm d) None of these

14. In ATN Airborne Network ‘CMU’ stands for –


a) Cockpit Management Unit c) Communication Management Unit
b) Controllers’ Management Unit d) Coordination Management Unit

15. The ‘Dial-up Circuits’ are connected with AMSS Unix Server through :
a) LTU-B/C/M Card (B-mode) c) LTU-B/C/M Card (M-mode)
b) LTU-B/C/M Card (C-mode) d) X.25 Communication Server

16. In ‘LTU-Rack’ of ECIL AMSS, the 1st LTU Card is reserved for –
a) Health monitoring of AMSS Servers c) System report generation
printer
b) System to System loop-back check d) LTU-D Card

17. In ECIL AMSS, text of Notam Messages are stored in –


a) SCSI Disk of AMSS Disk Switch(es)
b) IDE Disk of AMSS Main Server(s)
c) RAID-5 Disks of SQL Database Server(s)
d) All of the above

18. The AMSS Server can be made “Online” by :


a) ./n b) ./r c) ./h d) ./n
or ./r

19. The “Online” and “Hot-Standby” servers communicates health to each other through –
a) Serial Ports c) Stallion Card
b) NIC Card d) SOLC Card

20. In the text of an AFTN message, the maximum number of characters allowed is –
a) 1500 b) 1800 c)2100 d) 2400

21. While originating a Cancellation Notam (NOTAMC) in ECIL AMSS –


a) The Notam No. of previous Notam is inserted automatically
b) Text of the Notam to be cancelled is inserted automatically
c) The Notam No. of the Notam to be cancelled is to be entered by User
d) Both ‘b’ and ‘c’
e) None of the above

22. What are the numbers to be set for ‘ATC’, ‘BTC’ and ‘CTC’ in “config.dat” file of ‘Booking’
terminal of ECIL AMSS network?
a) Any value other than ‘1 or 2’ c) Respectively 3 , 4 and 5 only

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CATC/AMSS/Ops-14 Page 2 of 8
AIRPORTS AUTHORITY OF INDIA, CATC ALLAHABAD
Roll No…..………………
Signature ………………….
--------------------------------------------------------------------------------------------------------------------------------
b) Respectively 2, 3 , 4 and 5 only d) Not applicable

23. While storing the ‘Address Lists’, the maximum characters for ‘Group Indicator’ is
a) 8 Characters c) 12 Characters
b) 10 Characters d) 15 Characters
e) None of the above

24. The fully automated portion of AFTN Messages in ECIL AMSS is/are -
a) Heading & Origin c) Heading & Ending
b) Origin & Text d) Origin & Ending
e) Text & Ending

25. In case of failure of Message Switches (MS-1/2) or Disks(D0/1), the AVA application in
ECIL AMSS –
a) Comes to foreground, if it had been minimized
b) Gives visual effect to the block concerned ( in red color)
c) Generate alarm sound
d) Both ‘b)’ and ‘c)’
e) All of the above

26. In ECIL AMSS, Main Server (MS-1) receives AFTN messages from –
a) LAN c) CCM & Com Server
b) LAN & CCM d) All of above

27. On sending of ‘Tester’ to a Circuit/Channel by supervisory command in ECIL AMSS, -


a) System Send Tester Messages on that channel
b) System Closes the outgoing channel for other AFTN messages
c) System Closes the channel for incoming messages
d) Both a) and b)
e) All of the above

28. A station receives regularly MIS CH messages, it means –


a) Incoming circuit is failed c) Outgoing circuit has been diverted
b) Outgoing circuit is failed d) Outgoing circuit is on test
e) None of the above

29. Which of the following information/report is printed ‘Automatically’ in the System Report
Printer (SRP) of ECIL AMSS ?
a) 23rd Day Statistics
b) AFTN Circuit Loading Statistics
c) Hourly reports &/or Half hourly reports
d) Header summary of messages transacted through LTU
e) All of the above

30. In ECIL AMSS AVA Terminal, which of the following character(s) indicates ‘outgoing
circuit under test’?
a) T b) C and T c) t d) N e) C and t

31. In ECIL AMSS, during continuous AFTN message preparation at Booking terminal, the
‘Priority’ indicator displays by application as –

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CATC/AMSS/Ops-14 Page 3 of 8
AIRPORTS AUTHORITY OF INDIA, CATC ALLAHABAD
Roll No…..………………
Signature ………………….
--------------------------------------------------------------------------------------------------------------------------------
a) The first entry/priority of pry.dat file c) Blank – no priority
b) FF priority as default value d) Priority of the last message
sent

32. A Location Indicator should not be reassigned (after cancellation of previous assignment)
to another location for a period of at least- :
a) Six months c) Sixty days
b) Nine months d) Thirty days
e) None of the above

33. A Notam Message , addressed to VEGTYTYN , with Notam format error is received by
Kolkata AMSS under CSN IEA0478. The Kolkata AMSS will –
a) Stop processing the message and send the service message to Originator
b) Reject the message and send the service message to previous relay station
c) Relay the message to destination
d) Relay the message to destination as well as to Notam Error-Q of AMSS

34. A relay station has received a message with CSN less than expected. That station will
a) reject that message and send a SVC back to previous station
b) relay the message to the addressee and send back a SVC to previous station
indicating expecting CSN
c) change its LR in LR/LS table and takes action
d) reject the message and Supervisor has to take action
e) none of the above

35. Find out the true statement


a) There are 22 over-lapping AFS routing area in the world
b) For AFS routing area Letters assigned are A to Z, Except I, J, O, X
c) AFS Routing areas need not coinciding with the boundary of a state or FIR.
d) All the above

36 The information, not displayed in AVA is


a) Failure of circuit c) Failure of workstation
b) Failure of Unix server disk d) None of these

37 AFTN Message transmission takes place through


a) On-Line AMSS Server c) Database Server
b) Standby AMSS Server d) Both a) and b)

38 A checklist of NOTAM currently in force shall be issued as a NOTAM over AFS not
less than :
a) once in a month c) once in a year
b) once in 3 months d) none of the above

39 Regarding three letter designator, find the correct statement


a) ZX Series is being used for ATS.
b) Y Series is allotted to Aircraft operating agencies.
c) ZXA to ZXZ series is to be selected by states without referring to ICAO.
d) YXY is being used for military organization.

40 In Item C of a NOTAM, maximum characters can be

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CATC/AMSS/Ops-14 Page 4 of 8
AIRPORTS AUTHORITY OF INDIA, CATC ALLAHABAD
Roll No…..………………
Signature ………………….
--------------------------------------------------------------------------------------------------------------------------------
a) 14 b)10 c)21 d) 8

41 Trak command is used


a) To monitor the line c) To retrieve a message
b) To access a message d) To find out the status of a specific message(s)

42 The number of Rej/Svc/and Sus Q messages are displayed in frontend application’s


a) Error Queue c) Status Bar
b) Menu Bar d) None of the above

43 The path for data files for Front end application is


a) C:\\ WINNT\\System32\\Drivers\\etc\\hosts
b) C:\\Naa\\Frontend\\Datafiles\\
c) C:\\ WINNT\\ Frontend\\Datafiles\\
d) Current date & Time

_______________________________________________________________________
PART : B (SVC MESSAGE)

You are on duty at AMSS Delhi (I) and working with Mumbai (A) on circuit B.
Write the text of message in the following cases. [2 X 9= 18]
_______________________________________________________________________________
1) You have received message no. 039 with GP VI7NYTYX VI&PYTYX
in address line.

2) Received a message NO. 071 with GG VIBNYHYX VILKYTYX VIAL


in address line.

3) Message no. 044 received with GG VIBNYHYX VILKYHYX VIKJYTYX


in address line.

4) Message no. 047 received with 001219 VABBYNYX in origin line.

5) Message no. 049 received with @15%32 VAAHYTYX in origin line.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CATC/AMSS/Ops-14 Page 5 of 8
AIRPORTS AUTHORITY OF INDIA, CATC ALLAHABAD
Roll No…..………………
Signature ………………….
--------------------------------------------------------------------------------------------------------------------------------

6) Channel check message not received due at 0520. LR is 054.

7) Received message no. 056 after 065.

8) Received message no. 069 after 067.

9) Received mutilation in text with origin line 240515 VOBGYHYX.

_____________________________________________________________________________
PART : C (Fill in the Blanks) [3x1=3]
_____________________________________________________________________________

1. The ‘SOLC’ card provide the logic signal to …………….. card.

2. The AFTN Address of the office of ED(CNS), CHQ, AAI is ……………………….

3. In ECIL AMSS Notam Application, minimum number of mandatory fields of Notam


Text preparation screen is …………………...

Group : D(True / False) [6]

1) CPDLC is voice communication between Controller and Pilot.

2) If “ECIL AVA Application” runs on a workstation other than AVA terminal, the status of
all servers/nodes of AMSS network can be monitored.

3) SQL Server(s) is/are essential for Rxn/Txn of AFTN Messages through ECIL AMSS
networks.

4) The fifth and sixth letters of the PDAI is indicating a requirement for special
distribution.

5) In the Item-“C” of a Cancellation Notam, the DTG should be in


YYMMDDHHMM format.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CATC/AMSS/Ops-14 Page 6 of 8
AIRPORTS AUTHORITY OF INDIA, CATC ALLAHABAD
Roll No…..………………
Signature ………………….
--------------------------------------------------------------------------------------------------------------------------------

Group : E (Short Questions) [30]

1. Read the following AFTN Messages which has been received for onward
relay through AMSS. Find out the ‘FPL Format’ error, if any, on the below FPL
message. (3)

ZCZC LCL0107 190902


FF VABFZQZX VANPZRZX VECFZQZX
190900 VECCZPZX
(FPL-JAI204A2627-IS
-B737/M-WSDHI/S
-VECC1000
-N0450F400 DCT CEA G450 NIPAD
-N0447F400 G450 BBB DCT
-VABB0224 VAAH
-EET/VABF0059
-REG/VTJNE SEL/DJBP ADC/ZC549)

NNNN

2. Describe Address Stripping. (3)

3. Write any three responsibility of AMSS Supervisor. (3)

4.. List the types of Remote Communication lines, ECIL AMSS is capable to handle.(5)

5. List the various categories of messages along with the priority indicator. (4)

6. State the purpose of System Report and Reject Printer. (2)

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CATC/AMSS/Ops-14 Page 7 of 8
AIRPORTS AUTHORITY OF INDIA, CATC ALLAHABAD
Roll No…..………………
Signature ………………….
--------------------------------------------------------------------------------------------------------------------------------
7. Write short notes on following:
a) TxQ and RejQ Monitoring (3)
b) High Speed connection (2)
8. Label the blocks of the following block diagram of ATN Architecture.
Also describe it briefly. (5)

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CATC/AMSS/Ops-14 Page 8 of 8

Potrebbero piacerti anche