Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Easy to assemble
Straight flight staircases are made up of easy-to-
handle parts that are screwed together. The only
tools you need are impact wrenches (box wrench
or ratchet wrench).
Each individual staircase part is labelled with a
marking tag to facilitate assembly.
NOTE! No welding is necessary during assembly.
Straight staircase with an arch railing.
Railings
Weland manufactures three different types of standard
railing for straight flight staircases. Industrial railings,
railings with intermediate rails and round-bar railings.
The railing height as standard is 900 mm on the flight of
stairs and 1100 mm on landings. If there is a risk of fal-
ling and the fall height is greater than a normal storey,
the railing should be at least 1100 mm high.
Industrial railing
Handrail and balusters in tube Ø 42 mm.
Used primarily within industry..
Railings with
intermediate rail
Handrail and balusters in tube Ø 42 mm.
Intermediate rail in tube Ø 26.9 mm. Standard stair treads
Used mainly as an escape staircase
(in locations where children are The standard stair tread, TH6,is manufactured
not permitted). from pressure welding grating with a mesh
c/c 33x75 mm.
TH6-S is manufactured from the same type of
grating but has a safety front edge that clearly
marks the front edge and, in addition, provides
Round-bar railing increased anti-slip protection.
The round-bar railing is a child-proof
railing, i.e. the max. opening between the max.
balusters is 100 mm. Childproof 100 mm
Handrails
Round 50 mm solid wooden handrail can be delive-
red. Other handrails can be offered at request .
Extra handrail
Weland straight staircases can also be equipped
with an extra handrail. The alternative handrail is
placed under the handrail and is set at an
optional height.
Contrast Marking
The first stair tread of each flight, as well as the
front edge of landings, can be provided with contrast
marking. The design differs depending on the type
of stair tread.
Protective cage
To prevent unauthorised persons from entering the
straight flight staircase, it can be supplemented with
a protective cage at the bottom.
The protective cage is supplied in sections to be
bolted together. The requisite bolts etc. are included.
The cage is placed on the foundation.
Protective cages are manufactured in various
versions, grating, expanded metal, tubes, etc.
The cage door is secured by an ASSA 565 falling
latch lock and door handles on both sides. The cage
is opened from the outside by key and by knob from
the inside.
Gates
Weland gates can be mounted on the straight
flight staircase. The gate’s hinges and lock fittings
areinstalled on the railing. The lock is spring loaded
and so firmly that small children cannot open it.
Staircases with
heated stair treads
Over the years, we have supplied a number of
flushing stands to a concrete supply company and
its facilities in the Stockholm region. During the
winter, there is a major problem with snow/ice in
this type of concrete station, where concrete trucks
reverse in and flush out the remaining contents
prior to refilling.
Combi-stairs
Weland combi-stairs, as the name suggests, are
combinations of straight staircases and spiral
staircases. These can be made with radius or with
treads going out in the corner. Treads, railings and
surface treatment as for other spiral staircases.
Grating products
Grating | Gangways for disabled people | Fixings
Kerb angle frames | Plank type flooring, slit plank type flooring |
Stair treads and landings
Other products
Cat ladders | Grating furniture | Tag embossing press
Expanded metal | Cold-formed Sigma beams | Surface treatment
Pallet racks | Cantilever racks | Pull-out units