Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
‘s Instrument and Control Switch is a heavy-duty rotary switch that satisfies the most
demanding requirements of the industrial control and power applications. These
switches are 600V AC rated and are recognized by Underwriters Laboratories in the
United States and Canada.
The following details the most common applications, contact arrangements and
escutcheon plate markings. For combination of contact arrangements, handles,
escutcheon plate marking and special features not shown, contact the factory for
availability.
www.GEMultilin.com
INSTRUMENT AND C ONTR OL SWITCH
INSTRUMENT AND CONTROL SWITCHES
2.24 STOP SCREWS SUPPLIED TO
”D”
.13 LIMIT ROTATION AS DESIRED
.63 TYP
3.25 DIA.
2.91 2.25
2.22 DIA.
1.00
2.81
01.9 MAX PANEL TYPICAL SCREWS 8-32 x 1/4 BD, HD SUPPLIED
OVAL HANDLE
7 6.2
MAKE ONLY RATINGS:
8 6.6 75A- 120 VAC
9 7.4
37.5-240VAC
75A-24-125VDC
10 8.0
37.5A-250VDC
Slip Contact - add 1.5”
Pull - to- lock- Add 1 ” OPEN CONTINUOUS RATING - 30A-600V
DIELECTRIC STRENGTH - 2200VRMS 2.00
(these are approximate dimensions)
LETTER APPEARING AFTER MODEL NO i.e. 952401C
2.00 2.00
2.88
PISTOL GRIP
2.25 “D”
1.88
KNURLED “C”
OVAL “B”
1.96
2.60
0.62 DIA.
3.13
2.25
KEY LOCK “T” - HANDLE “RH”
OVAL - REMOVABLE “E”
www.GEMultilin.com 2
®
VOLTMETER VOLTMETER
TRANSFER SWITCH OFF ON
2 Wire, Single Phase or D—C
Double Pole / Single Pole Throw
VOLTMETER VOLTMETER
TRANSFER SWITCH OFF
4 Phase, Two Phase or Two 1 2
separated D—C circuits
Double Pole / Double Throw
VOLTMETER
VOLTMETER 2
TRANSFER SWITCH 1 3
3 Phase, Phase to neutral OFF
Double Pole / Triple Throw
VOLTMETER
VOLTMETER
TRANSFER SWITCH
2-3
3 Phase, Phase to Phase 1-2 3-1
Double Pole / Triple Throw OFF
VOLTMETER
TRANSFER SWITCH
3 Phase, Phase to Phase
VOLTMETER
and Phase to neutral
OFF
Double Pole / Six Throw
1-2 1
9510E - 7V24
VOLTMETER
TRANSFER SWITCH
6 Wire, Two 3 Phase VOLTMETER
circuit, Phase to Phase OFF
Double Pole / Six Throw 3 -1 1-2
2-3 2 -3
Handle: Round, Knurled
1-2 3 -1
Cat. No. 952406C OFF
Depth behind panel 2.90
9510E - 8V33
AMMETER AMMETER
2
TRANSFER SWITCH
1 3
3 Phase ,
Two current Transformers
AMMETER AMMETER
TRANSFER SWITCH 2
3 Phase , 1 3
OFF
Two current Transformers
AMMETER
AMMETER
2
TRANSFER SWITCH 1 3
3 Phase ,
Three current Transformers
AMMETER
AMMETER 2
TRANSFER SWITCH 1 3
3 Phase , OFF
Three current Transformers
AMMETER
AMMETER
2
TRANSFER SWITCH
3 Phase , Phase to Phase
1 3
and Phase to neutral
Double Pole Six Throw
9510A - 3A10
Handle: Round, Knurled
Cat. No. 952411C
(NO OFF)
AMMETER
2
OFF OFF
1 3
AMMETER-VOLTMETER AMMETER-VOLTMETER
TRANSFER SWITCH 2
1 3
3 Phase , Phase to Phase OFF
Three current Transformers
WATTMETER WATTMETER
TRANSFER SWITCH OFF
ON
3 Phase ,
Three current Transformers
Three current Potential
Transformers
Handle: Round, Knurled
9510D - 2 W14
Cat. No. 952419C
Depth behind panel 3.60
WATTMETER
WATTMETER OFF
TRANSFER SWITCH ON
3 Phase ,
Two current Transformers
Two current Coils
Two potentials Coils
9510D - 2 W14
Handle: Round, Knurled
Cat. No. 952420C
Depth behind panel 3.60
WATTMETER
OFF RVA
W
WATTMETER
REVERSING SWITCH
P.F. METER
POWER-FACTOR OFF ON
SWITCH
3 Phase ,
Two current Transformers
One or Two current Coils
SYNCHROSCOPE
OFF
SYNCHRONIZING ON
SWITCH
Machine to bus with interlocks
RAISE LOWER
SWITCH
GOVERNOR OR RHEOSTAT
Split field motor
BREAKER CONTROL
CIRCUIT BREAKER TRIP
TRIP SWITCH
Double Pole / Single Throw
contacts normally open
Handle: Pistol grip,
Spring return
Cat. No. 952436D 9510D - 1B18
Depth behind panel 2.40
9518B - 2B23
9518B - 2 B23
9518B - 2 B23
9518B - 2B23
PULL-TO
Handle: Pistol grip, LOCK
Spring return
Cat. No. 952450D
Depth behind panel 4.70
9519C - 3B33
PULL-TO
Handle: Pistol grip, LOCK
Spring return
Cat. No. 952452D
Depth behind panel 6.90
9518B - 2B23
UNIVERSAL
CIRCUIT
Handle: Pistol grip,
Spring return
Cat. No. 952457D 9518B - 2B23
Depth behind panel 6.20
www.GEMultilin.com 8
®
3 2&7
The above switch will family will be provided as DEVELOPMENT 3 unless otherwise specified. By changing stop screw location
and wiring connections the switch may be configured by the consumer as DEVELOPMENTS 1 or 2. Escutcheon for DEVELOPMENT 3
provided as standard unless DEVELOPMENT 1 or 2 specified at time of order. This External Jumper provided to allow common input to circuit 1 & 2.
However removal of the Jumper does not isolate the two currents as these two terminals are tied together internally in the off position.
2&7
6
The above switch will family will be provided as DEVELOPMENT 6 unless otherwise specified. By changing stop screw location and wiring connections the switch may be configured
by the consumer as DEVELOPMENTS 4 or 5. Escutcheon for DEVELOPMENT 6 provided as standard unless DEVELOPMENT 4 or 5 specified at time of order. www.GEMultilin.com
9
INSTRUMENT AND C ONTR OL SWITCH
ROTARY SELECTOR SWITCHES
DESCRIPTION STOPS CONTACTING AND WIRING DIAGRAMS CATALOG NUMBERS
9 1&3
6 - THROW
SWITCH
(WITH OFF)
SHOWN IN POSITION 2
10 1&2
7- THROW
SWITCH
(WITH OFF)
11 NONE
The above switch will family will be provided as DEVELOPMENT 11 unless otherwise specified. By changing stop screw location
and wiring connections the switch may be configured by the consumer as DEVELOPMENTS 7 or 10. Escutcheon for DEVELOPMENT 11
provided as standard unless DEVELOPMENT 7 or 10 specified at time of order.
(Strap jumpers are silver-plated brass.)
JUMPERS
CATALOG NO: DESCRIPTION
Strap jumpers are available for adjacent
9502011-10-C3 Jumper, adjacent terminals on the same deck.
contacts, and wire lug assemblies are available 9502012-2-C3 Jumper, same terminal location on adjacent deck.
for other terminal jumping. The strap jumpers are (Wire and lug assemblies have #10 AWG wire and insulated ring lugs.)
available in packages of ten or twenty-five. The
CATALOG NO: LENGTH (L)
wire and lug assemblies are ordered individually. 95002012-1 3 - 1/16”
Data is as follows: 95002012-2 4 - 1/4”
95002012-3 3 - 5/8”
www.GEMultilin.com L 10
®
SEE NOTE
4*
1.75
4.75
1 3.6
GENERAL PURP OSE RATING
RATING
2 4.3
30A 600V Open CARRY
3 4.7
20A 600V enclosed CARRY
4 5.5
20A 120VAC .8 PF, MAKE & BREAK
5 6.2
15A 240VAC .8 PF, MAKE & BREAK
UL File No. E101598 6 7.5
6A 600VAC .8 PF, MAKE & BREAK
11 www.GEMultilin.com
INSTRUMENT AND C ONTR OL SWITCH
LOCK OUT RELAY SWITCHES
MANUAL RESET LOR CONTACT DECK LAYOUT
MANUAL RESET LOR
n=deck number
25 50 40 20 7 12.3 16.7
.2A .6A .2A OHMS OHMS OHMS OHMS OHMS OHMS OHMS
A 90
B 12 12 42 90
C 95
D 24 40 118 80 95 105
E 75 150
F 40 150 70 125
www.GEMultilin.com 12
®
STYLE 1 STYLE 2
REVERSED LIGHT CONFIGURATION
ROWS OF ROWS OF
LED VOLTAGE RATING SERIES 95 DASH # LED VOLTAGE RATING SERIES 95 DASH #
LEDS LEDS
120 VAC 50/60 HZ or 125VDC 2 -L2R120 120 VAC 50/60 HZ or 125VDC 2 -L2R120R
240 VAC 50/60 HZ or 250VDC 2 -L2R240 240 VAC 50/60 HZ or 250VDC 2 -L2R240R
48VDC 2 -L2R48 48VDC 2 -L2R48R
120 VAC 50/60 HZ or 125VDC 4 -L4R120 120 VAC 50/60 HZ or 125VDC 4 -L4R120R
240 VAC 50/60 HZ or 250VDC 4 -L4R240 240 VAC 50/60 HZ or 250VDC 4 -L4R240R
48VDC 4 -L4R48 48VDC 4 -L4R48R
Patented Feature: Leds are removable. If any Led fails and it is removed all others in the row remain lit.
13 www.GEMultilin.com
INSTRUMENT AND C ONTR OL SWITCH
LIGHTED ESCUTCHEON PLATES
REAR VIEW
Notes:
1. LEDS are removable and inserted by the use of needle nose pliers
2. Polarity should be observed during installation.
3. Molded escutcheon panel LED ports are polarized.
DRILL PATTERN
ESCUTCHEON ASSEMBLY
FRONT COVER WITH FLAG CUSTOMER PANEL 2 DECKS SERIES 95 SWITCH
2 ROWS OF LEDS PART# 1729C24822
ASSEMBLY
4 ROWS OF LEDS PART# 1729C24867
STANDARD OUTLINE, NOT
MODEL SPECIFIC
MOLDED PISTOL
GRIP HANDLE
PART# 1729B20856
PROTRUSION OF LEDS
WHEN FULLY ASSEMBLED
14
www.GEMultilin.com
USA, Canada, Asia, Latin America Europe, Middle East, Africa
Tel: +1-800-547-8629 Tel: +34-94-485-88-00
Fax: +1-905-201-2455 Fax: +34-94-485-88-45
e-mail: sales.multilin@ge.com e-mail: gemultilin.euro@ge.com
Series 95 Switches Please refer to our website www.GEMultilin.com for more detailed contact information CS00A40786 Rev.2 10/09