Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Guideline information on performance data and be damp, but must be without free standing
dimensioning is given in the tables hereafter. water.
Using the cartridges
MasterFlow® 920 AN. Before tightening the if swallowed. Use only with adequate ventilation.
anchors and exposing them to loads, respect Specific information on handling and transport
the waiting times as shown in the tables hereafter. can be found in the Material Safety Data Sheet
of MasterFlow ® 920 AN. Dispose empty
Cleaning of tools packaging and unused, hardened material
according to local regulations.
Residual material must be mechanically removed
after hardening, or by brush and with plenty of Disclaimer
soapy water or solvent when still uncured.
The technical information given in this publication
Packaging is based on the present state of our best scientific
and practical knowledge BASF Yapi Kimyasallari
MasterFlow® 920 AN is available in cartridges Sanayi A.Ș. is only responsible for the quality
of: of the product. BASF Yapi Kimyasallari Sanayi
- 280 ml peel pack for standard silicon gun A.Ș. is not responsible for results that may occur
- 380 ml coaxial for special gun because the product is used other than advised
- 825 ml side by side for special gun and/or out of instructions regarding the place
and the method of use. This technical form is
Storage valid only till a new version is implemented and
nullifies the old ones (08/2013).
12 months in original unopened cartridges.
Store at +5oC to + 30oC.
Watch points