Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
J.K.
COARSE
PUTTY
MEMBER
IGBC-MP-1104
Certified to :
ISO 9001 (QMS) & ISO 14001 (EMS)
OHSAS 18001 & SA 8000
SURFACE PREPARATION J.K. COARSE PUTTY
Dirt
1 Organic 2 J.K. Coarse Putty is a coarse powder specially formulated to be used as
Growth base coat.
Paint
Salt It covers up undulation and can be used as a layer prior to use of J.K.
Scrub with wire brush Clean Prepared surface with water. Wall Putty (SFP- silky finish powder) or any painting system.
It Provides damp and weather resistant finish for further application of all
COARSE PUTTY MIXING
kind of paints (Damp resistance means resistance to water in humid air &
3 4 ter
Wato 28% not to physical water leakages).
25
§Maximum thickness of 2nd coat (Layer) 3 to 4 mm. drying of putty normally after 3 days.
§Total thickness can go up to 10 mm in 2 Layers. Clean application tools with clean water.
l
lSurface shall be plastered OR made with cementitious handling putty powder or during removal of application marks
material & totally clean. with fine emery paper-say wearing nose mask.
lSurface shall be moderately rough (Neither too-rough nor Keep the product out of reach of children.
l
too-smooth). Once putty paste has hardened, it shall not be used by
l
as it is.
Life of J. K. Coarse Putty is as long as the life of
l
tools.
As prevalent in case of other non-cement putties,
l
STORAGE
lStore J.K. Coarse Putty in a dry place.
l Open the bag just before use.
PACKAGING
l 20 kg laminated P.P. bag.
Contact:
Technical Service & Marketing Service
Padam Tower, 19, DDA Community Centre, Okhla, Phase-I, New Delhi - 110020
Tel.: 011-49220000 Fax: 011-49220044
E-mail:
For CTS: cts.delhi@jkcement.com
For Marketing: jkwc.delhi@jkcement.com
Helpline No.:
1800 102 8822
www.jkcement.com