Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The information in this manual may change without prior notice due to technical changes or system upgrades.
Our device also called vehicle recorder, it can record your driving process, including images and voices etc.
The device cannot always record all sounds and pictures that is shown on the screen in different circumstances while
you are driving,
d i i please
l use the
th device
d i forf checking
h ki recordings
di on the
th screen purpose only.
l
1
CONTENTS
Features ------------- 03
Others ------------- 07
2
Features
Video REC mode: Capable of recording footage continuously. LED security lighting installed
- Driving mode: Loop recording time at 1min. - Potentially prevent thefts and burglaries and make an interior
- Event mode (G-sensor): Recording 10sec prior to decoration effect.
shock and 10sec after the shock.
- Manual mode: Recording 10sec prior to pressing manual Embedded RTC (REAL TIME CLOCK)
button and 40sec after pressing the button. - Recordings can be saved in real time and date.
- Parking mode (Motion-sensor): Recording 10sec prior
to the movement detected and 50sec after the motion. Secure and flexible mount holder
- Can be moved up and down, right and left side.
A battery backup power installed (150mAh battery)
- Save the last file while recording if the power suddenly Interwork with navigation
cut off. - Interwork with our brand navigation, such as I7/CNS-
Built-in G-sensor / Motion-sensor / Illumination-sensor 300D/CNS-8000D.
- You can playback any recorded files or customize
configuration settings of the device on navigation
screen.
3
Notice for safety
This user manual is made for easy using the device, further more it will be helpful your safety driving.
Before operating the device, read the manual carefully and follow these safety warnings in order to prevent the user’s property damage.
• If the device is relocated, then it may cause the camera angle changed simultaneously.
Before using the device, be sure to adjust the camera angle and double check it.
• Make sure that the device is installed in a proper place. If not, the video recording can not work well.
• Windows tinting may affect video quality, so avoid tinting windows deeply.
• Keep your vehicle windows always clean for the best video quality.
• The device is regarded as driving record equipment; driver or user may get the proper video images only in the normal conditions.
conditions
When you drive through a tunnel or drive at night, the video cannot work properly.
Intense back light also affect the quality of the video.
• If the device is damaged by a huge car accident or power does not connected, it may affect to record the accident situation normally.
• Keep camera lenses always clean. If the lenses have some substances or fingerprint on it, you may bad quality of video recordings.
• The recommended operating temperature range will be at -10℃ to 60℃, make sure that the optimal temperature is maintained.
D not expose the
Do h ddevice
i under
d extreme temperature ((too hi highh or too low),
l ) or else
l the
h device
d i can be b damaged
d d quickly.
i kl
Even if you are not using it, keep the device within acceptable operating temperatures.
• Do not use the device in a hot and humid circumstance.
• Make sure that it is far away from the water or other liquids, it may cause device damage and we will not take responsibilities for such
incidents.
• Do not ppress the button intensely,
y, or else it might
g cause device damage. g
• Only use soft and dry cotton cloth to clean up the device.
• Do not use strong chemicals or detergents to clean the device, it might cause device damage.
• Do not arbitrarily disassemble or drop the device, it may cause serious damage or a mechanical breakdown.
• Do not operate the device while driving, or else it might cause a vehicle accident.
• Do not install the device in which driver’s view is blinded, it may cause car accidents.
• The device cannot interwork well with other company
company'ss equipment
equipment.
If you are trying to connect in a force, it may cause device damage and we will not take responsibilities for such incidents.
• Keep the device and cables clean, or else it may cause damage or malfunction.
• When the device is damaged by an accident, stop using it and contact us immediately.
• Keep checking the camera angle; make sure that the device is fixed firmly, as it may become detached due to severe vibration of
vehicle in a long distance driving.
4
Precautions while Using
Before using the device, read the instructions carefully for proper use.
• When yyou first start usingg our device, check the recorded files after 5minutes filming.
g
After checking the device and SD card before recording, do double check that the installation method have no problem then you may
take recordings normally.
• Do not save any other files on SD card, it may cause malfunction or it may affect the storage capacity of recording.
• Do not remove SD card before cutting off the power of the device completely.
completely
After turning off your engine, if you take out SD card from the device when LED is still on, then the last recorded file cannot be saved.
• Keep the memory capacity of SD card more than 300MB for normal recordings.
If the capacity is less than that, it may not record properly.
• For more safely using SD card, we highly recommend you keep to format SD card regularly; it can prevent SD card error effectively.
• After long time recording usage with enclosed SD card, it may not work well due to its own limited write/read cycles.
Replace it with new one, or else we will not take any responsibilities for such case.
5
Precautions while Using
• If you park the vehicle outside for a long time, remember to cut off the power supply from the device.
Or else it may cause malfunction of the device due to the extreme high temperature.
• If the inside vehicle temperature raised to over 80℃, the device is automatically cut off the power due to the auto power off
circuit built-in it.
If you connect the permanent power in parking mode, vehicle battery begins to be discharged.
Due to SD card is regarded as consumable items, keep to check and maintain it.
• The period of the repair warranty of SD card is 6 months from the date of purchase.
• If it has passed its warranty, we will not take any responsibilities.
• We highly recommend you format SD card every 1 month.
• Format
F method:
h d P Press the “Initialize
h “I i i li SD card”d” button
b on settings
i menu with
i h voice
i guidance,
id then
h iti will
ill be
b formatted
f d automatically.
i ll
6
Others
• When
Wh you insert
i SD card
d iinto the
h device,
d i check
h k cardd directions
di i carefully.
f ll
• Carefully remove SD card from the device, so that it may not stick out so far from you.
• When upgrading the firmware, do not remove SD card and keep the power is connected well.
Or else it may cause the device damage.
• Keep the window is clean and mount holder fixed firmly, as it may become detached while driving.
Do not use the same adhesive tape several times for fixing mount holder
holder, it may detach from windows and cause an accidents
accidents.
• Before connecting the permanent power, read the permanent power manual firstly.
If you connect it in a wrong way, it may cause the device damage.
7
CONTENTS
8
Package Components
Due to improvement in better quality and performance of the device, the real components are subject to change without notice.
Bundle
PERMANENT POWER CABLE MINI CD USER MANUAL QUICK GUIDE CABLE HOLDER
(3 WIRE CABLE) (8CM EXTERNAL DIAMETER) (A SHEET OF A4 PAPER)
9
Package Components
Due to improvement in better quality and performance of the device, the real components are subject to change without notice.
Option
※ All optional accessories as above are sold separately, please contact us for purchasing.
10
External Appearance
CAMERA LENS R
Record
d any activities
i i i that
h take
k place
l in
i front
f off the
h vehicle.
hi l
RESET R
Reset the
h device
d i immediately.
i di l
Record any sounds and pictures that you see on the screen.
LCD SCREEN
Operate all
ll functions
f i by
b touching
hi the
h screen.
11
External Appearance
12
External Appearance
REARVIEW CAMERA Record any activities that take place in rear side of the vehicle.
13
Installing Instructions
14
Installing Instructions
15
Installing Instructions
Main unit fixed at the back of room mirror. View from outside to front passenger seat.
Look up to see main unit from driver's view. Get driving after installing the main unit.
16
Permanent Power Connection
BATT(+)
ACC(+)
GND
BLACK WIRE
Connect to the vehicle chassis or vehicle bolts.
17
Video Plug & USB
NC
Video in
GND
GPS TX
GPS RX
GND
D-
D+
ID
GND
18
CONTENTS
LED Indicator
I di t Light
Li ht ------------- 37
& Vocal Guidance
19
Recording Mode
There are four types of recording modes, in addition it supports the photo function also.
20
“DRIVING” Folder
“DRIVING” F Folder
ld C Contents
- Once your recording has started, each folder is being created based on date
and time sequence on SD card.
After that, each file will be generated exactly the same way as folders.
- Each file is named into the current recording date and time in chronological order.
The filename is consisting of “REC
REC_2012_07_12_12_32_56.avi
2012 07 12 12 32 56 avi”, and it indicates
that the file was generated on July 12th 2012 at 12:32:56pm.
- Basically the recording length is one minute only for each file.
- Each file is created in a folder with name as current “date and time”, and the
maximum recording time depends on the capacity of the SD card.
If the SD card memory is full, the program will delete the oldest folder & file in
order,
d ththen create
t the
th new folder
f ld & file
fil bby currentt ddate
t and
d ti
time.
Impact Detection(G-sensor)
- In the case of an impact, the sensors will trigger the event mode.
- When an impact is registered, it begins to record 10 seconds prior to the impact
aandd 100 seconds
seco ds after
a te the
t e impact.
pact. In the
t e “EVENT”
V N folder,
o de , the
t e maximum
a u
recording time of each file will be up to 20 seconds long.
21
“EVENT” Folder
Startup E
S Event RRecording
di
- When an impact is occurred based on your registered data(adjust the value in
configuration), alarm will beep once in shortly and REC LED lamp flashes.
Basically the driving mode is automatically changed to event recording mode.
- If the power goes out while the device still works, all current recordings will be
saved immediately. You can reboot the system by reconnecting the power.
E h fil
- Each file iis named
d iinto
t th
the currentt recording
di date
d t andd time
ti ini chronological
h l i l order.
d
The filename is consisting of “REC_2012_07_12_12_32_56.avi”, and it indicates
that the file was generated on July 12th 2012 at 12:32:56pm.
- The total quantity of recorded files in the “MANUAL” folder depends on the
actual capacity of the SD card.
If the SD card memory is full, the program will delete the oldest folder & file
in order, then create the new folder & file by current date and time.
22
“PARKING” Folder
S
Startup P
Parking
ki R Recording
di
- Parking recording mode will be only activated when the device is connected
by permanent power.
- After ACC power goes off, around 30 seconds later the parking mode
is getting started.
started
When ACC power goes on, around 10 seconds later it automatically returns to
driving recording mode.
(In the case of the ignition turns on or ACC power is connected by vehicle key.)
- If a movement is detected, you can see REC LED lamp flashes once then goes off.
- The maximum recording time of each file will be up to 1 minute long from detecting
the first movement. New recorded file will be created continuously in the same way.
“PARKING”
PARKING Folder Contents
- Each folder is being created based on date and time sequence on SD card,
and each file will be generated exactly the same way as folders.
- Each file is named into the current recording date and time in chronological order.
The filename is consisting of “REC_2012_07_12_12_32_56.avi”, and it indicates
that the file was generated on July 12th 2012 at 12:32:56pm.
23
“MANUAL” Folder
S
Startup Manual Recording
i
- When you press “manual REC” button on LCD screen by force,
it begins to record in the manual recording mode.
You can press the “manual REC” button once again for stopping the manual mode.
- It automatically turns to driving recording mode after one minute recording time
has passed.
- Manual mode will be disabled once the device detects any impacts,
or the manual mode recording has passed one minute length.
- Each file is named into the current recording date and time in chronological order.
The filename is consisting of “REC_2012_07_12_12_32_56.avi”, and it indicates
that the file was generated on July 12th 2012 at 12:32:56pm.
24
Basic Operation
Start Up
Turn Power On
Switch on the ignition on or slide the power button on your left hand side
of the device to turn the device on.
After power is connected, it will automatically enter into the driving mode and start
recording.
Screen Recorder
It always records any sounds and pictures that you see on the screen.
25
Basic Operation
Main Menu
It will return to main menu by clicking the button once.
There are three icons on the menu, including “Record” icon, “Playback” icon
and “Setting”g icon.
Photo Function
It is available for taking pictures by camera lens
(You can only start taking pictures after 10 sec later from creating the recording files.)
Manual Recording
It will enter into manual mode instead of driving mode.
(When an impact is occurred, the touch screen will be locked up or not responding.)
Audio Recording
You can click the button to start audio recording for saving sounds surrounding the
vehicle. You can click the same button to mute or unmute the sound.
Screen Switch
By default, you can see both main screen (recorded by front camera) and
sub screen (recorded by rear view camera) simultaneously all the time.
You can reverse front and rear view camera monitors alternately by clicking the icon.
LCD Off
By clicking this button to turn off the LCD back light, and if you click any spots
then LCD screen turns on again.
26
Menu Icon
Video Recording
It will display the view from the front facing camera recording.
Video Play
It supports for playing back all recorded files by clicking the icon.
Yo can click and play
You pla any
an recorded files in the file list.
list
Settings
You can quickly change and customize many default settings in different ways.
Video Play
When y
you click the “Video Play”
y icon, yyou can see the below image.
g
Recoding Folder
You can select any recording folders to play a specific file.
It consists of five different folders in file list,
including Driving / Event / Parking / Manual / Photo folder.
File List
It Shows all files saved in the SD card, you can select a certain file to playback.
Previous / Next Page
It moves to the previous / next page of the file list.
As well you can see the page information,
information the processing pages and
the total number of pages.
27
Menu Icon
Video Play
It plays back the recorded file immediately by clicking on a specific file in the file list page.
LCD Screen
A selected recorded file can be played on LCD screen.
When the current file has finished playing, it will auto play the next file in order.
File List
It stops playing and moves to the file list page.
Previous File
It cuts to play the current file and moves to play the previous one.
one
Play / Pause
By touching any spots on the screen, you will
You can press the button to toggle between play and
see player menu immediately.
pause of the current file by turns.
Next File
It cuts to play the current file and moves to play the next one.
Screen Switch
By default, you can see both main screen (recorded by front camera) and
sub screen(recorded by rear view camera) simultaneously all the time
time.
You can reverse front and rear view camera monitors alternately by clicking the icon.
28
Settings
It shows the setting menu by clicking the setting icon.
29
Settings Icon
Time Setting
You may make changes the date & time settings by clicking “+” / “-” icon.
Volume Setting
There are three levels for the volume settings, these are: Low/Medium/High.
30
Settings Icon
Brightness Setting
Brightness
You can adjust the level of LCD backlight brightness through “+” or “-” button.
31
Settings Icon
During Parking
You can adjust the sensitivity level of impact sensor while parked,
and there are three levels of sensor available, Low/Normal/High.
If an impact is occurred based on user’s registered value while parked,
it will automatically enter into parking mode immediately.
32
Settings Icon
But the backlight timeout will be disabled when the file plays back on LCD screen.
33
Settings Icon
Note that it is just a recommendation for notification, and it will not format
SD card automatically by itself.
Formatting SD Card
St t Formatting
Startup F tti
You can do format SD card on LCD screen by touching the button.
After the formatting is finished, all files will be lost and not recoverable and
the system is starting up automatically.
Before formatting SD card, you should backup all the essential files on your PC.
34
Settings Icon
Partition Information
We have three types of storage partition, and you will see different partition
information according to your settings.
Recording Time In Parking Mode
R di ti
Recording time S tti
Settings IIn P ki M
Parking d
Mode
In order to prevent battery from totally discharging, you can choose one of the
recording time options to customize your settings, then it will automatically
cut off the power of the device when it reaches a user-defined setting.
35
Settings Icon
Calibration
With a stylus pen, press on the cross “+” icon and hold for some seconds.
After that the cross will move to the other section and follow the cross to travel
all points on the screen. (the center & all four corners)
Once the calibration is done, it will return to factoryy default settings.
g
Retry (Recalibration)
You can act or process of calibrating again by stylus pen.
System Information
Save Setting
You should click “save” button to save your settings after you have done the
calibration manually.
System Information
It shows the model name and the OS version.
36
LED Indicator &Vocal guidance
Flashing Flashing
BOOTING UP Video recording starts.
(RED→BLUE 0.5sec)
0 5sec) (BLUE 00.5sec)
5sec)
Flashing
DRIVING REC ON ((BLUE)) N/A
(BLUE 0.5sec)
05 )
Flashing Flashing
EVENT REC Beep sound once.
(BLUE 0.25sec) (BLUE 0.5sec)
Flashing Flashing
SD CARD MISSING Insert the SD card.
(RED→BLUE 0.5sec) (BLUE 0.5sec)
37
Interworking With Navigation
Operation on navigation
A. Connect the device and navigation by enclosed USB cable. (USB cable is an optional product and sold separately)
B. Click BLACK BOX (Sameview) icon on navigation.
C. You can choose to click “video playback” or “configuration” icon.
D. If you click “video playback” icon, then you can choose any recorded files to play it on navigation.
E. If you click “configuration” icon, then you can customize all the default settings. Do not forget to save your settings.
38
PC Viewer(“SameView”)
Program
g Install ------------ 40
Configuration ------------ 41
39
Program Install
“SameView” Setup
You can find out “Sameview Setup” icon on enclosed CD manual.
Installing
Follow the onscreen instruction of the Setup program carefully
carefully.
When you see below image appears, keep to click on “next” icon.
If you see the below “Sameview” icon shown on your computer, it means
the installation is successful.
40
Configuration
41
Configuration
1. Front Camera Display images recorded by front camera. 16. System Info Show system information of Sameview.
2. Rear Camera Display images recorded by rear camera. 17. Enlarge Screen Screen can be magnified.
3. Google Map Point out vehicle position on the map. 18. Video Calling Select the drive letter and call video player
5. Process Bar Show the process time of image. 20. Previous Video Play the previous recorded file.
6. Brightness Adjust the backlight display. 21. One Min Before Start replaying video track from
1 min backward the file.
7. Volume Control Adjust the audio settings.
22 Play
22. Pl or Pause
P T
Toggle
l between
b t play
l andd pause.
8. Driving REC Show all files that saved in driving folder.
23. One Min Later Start replaying video track from
9. Event REC Show all files that saved in event folder. 1 min forward the file.
10. Manual REC Show all files that saved in manual folder. 24. Next Video Play the next recorded file.
11. Park REC Show all files that saved in parking folder. 25. Fast Play Adjust playback speed of video files.
Play at normal speed or double speed.
12. File List Show all files saved in SD card.
Files are listed on each playlist of Driving/ 26. Vehicle Speed Show the vehicle speed records.
Event/Manual/Parking folder.
folder
27. File Recovery Recover the current playing files.
13. Rear Cam Screen Display the image that recorded by R-cam.
Display Google map. 28. Screen Capture Save front view image and rear view image
as a JPG file.
14. Configuration Customize the configuration of the device.
29 S
29. Save Vid
Video Fil
File S
Save current playing
l i video
id as an AVI fil
file.
15. G-Sensor G-sensor setting.
42
Configuration
If the recorded file does not appear in the file list aautomatically,
tomaticall
please check again that SD card has been connected correctly to your computer.
File List
Double click on the selected files from video file list or just click
the “play” button to playback a certain recorded file.
You can see four folders as shown picture in the file list, these are:
Driving REC folder/Event REC folder/Manual REC folder/Parking REC folder.
You can select either a file or folder from the video file list to playback
a certain recorded file
file.
File List It displays filename, recording date and file size information in the file list.
43
Configuration
Maximize Screen
When
Wh you click
li k this
thi button,
b tt you can play
l the
th recordings
di in
i a full
f ll screen mode.
d
Brightness Adjustment
You can adjust the brightness of main screen and sub screen at the same time.
And if you click “lamp” icon once, it will be return to default settings.
Volume Control
Controls the volume. (Mute/ volume down, volume up)
Configuration
You can quickly change and customize many default settings of the device.
For more details, please refer to next page.
44
Configuration
Time Setting
Before using the device
device, be sure to configure this time setting in your local time.
time
Clock battery running time installed in the device is about one week.
If the device is off more than one week, recorded files will show the wrong date
and time.
In this case, you should activate the time setting again by yourself.
45
Configuration
G-Sensor Graph
G-sensor can measure how quickly a vehicle slows down in a frontal crash or
accelerates to the side in a side-impact crash.
G-sensor graph shows the variation of G-sensor.
In the case of an impact, the sensor will trigger the event recording mode from
driving mode.
System Information
It shows the system information of Sameview program.
Enlarge Screen
An enlarge screen will be displayed in a new window.
It allows you to quickly zoom in or magnify images of the current playing file by
clicking the button.
46
Configuration
Screen C
S Capture
t
You can capture main screen image and sub screen image at the same time as a JPG file
from the current playing file.
By default, the filename of main screen will be “SamplePlayer_front.jpg”, and for sub
screen will be “SamplePlayer_rear.jpg”.
You can rename
ou ca e a e aall files
es as you wish.
ws .
47
CONTENTS
Specifications -------------- 49
48
Specifications
2Mega pixel
2M i l 1/3.2inch
1/3 2i h CMOS IImage S Sensor (active
( ti imager
i size:
i 1600hx1200v)
1600h 1200 )
2CH Recording
RESOLUTION
Front channel: 1280 x 720 (HD) max30fps
CAMERA Rear channel : 640 x 480 (VGA) max10fps
All glass
LENS
Angular
g field of view: diagonal
g 150”, Horizontal 112.5”, Vertical 81.3”
VIDEO ANGLE Viewing angle: 120˚, Aperture: F1.7
SIZE &
LCD SCREEN 3.5inch TFT LCD, 320x240 resolution , Full Touch screen
RESOLUTION
INPUT 12V~24V(Free Voltage).
POWER
BATTERY Built-in backupp battery(150mAH).
y( )
GPS UART SMART GPS connection, 232C/TTL support (External GPS module cradle Optional)
Motion detection/Impact detection(G-SENSOR)/Night video recording
SENSOR TYPE
(Illumination sensor)
SENSOR MODE & Parking mode(motion detection);
POWER Car battery discharge protection circuit embedded
DETECTION (Cut off in case car battery power is under 11.9V/23.9V or 11.7V/23.7V)
Play recorded file or change settings by connecting mini USB cable with
VIDEO OUT
CNS navigation
VIDEO VIDEO IN 1CH VGA rear side analogue video (CVBS_ NTSC)
Display OSD : (Year/Month/Date-video edit protection),
DISPLAYOSD
GPS connection
connection, Recording status,12V/24V
status 12V/24V status
Voice real time recording or voice deletion(Internal MIC) /
AUDIO AUDIO IN/OUT
Voice guidance (Internal speaker)
SD CARD STORAGE 8GB ~ Max 32GB (SD card format)
BI-COLOR LED Video recording(RED/BLUE 2color led), Security/Power On LED(Front-BLUE LED)
LED
LED indicator Shows the operation status
status.
INDICATOR
CA O FUNCTION
Security LED can prevent thefts and bursaries.
49
Specifications
CRADLE ADJUSTMENT Angle adjustable, it can be fixed firmly by double sided tape.
PLAYER Bundled CNS Viewer program
PC VIEWER
MOUNT HOLDER Google Map (location/time/vehicle speed data)
Permanent recording by 30Frame
VIDEO/VOICE HD resolution
Auto overwriting in case no memory space
STORING VIDEO CODING AVI, H.264 (MPEG-4 AVC),
VOICE CODING PCM
Store only NMEA data on SD Card
GPS
Display on Google map in PC
REC TYPE Driving recording/Event recording/Parking mode recording/Manual recording
DRIVING Loop recording time at 1minutes
VIDEO REC
PARKING Motion detect, Recording 10sec prior to motion and 50sec after the motion.
MODE
EVENT Recording 10sec prior to the shock and 10sec after the shock
MANUAL Recording 10sec prior to manual icon key press and 40sec after manual icon key press
MINIMUM & Storage : -20°C~90°C
TEMPERATURE
MAXIMUM Working : -10°C~60°C
SIZE & WEIGHT L x W x H/G 100 x72 x 13mm / 50g
50
Self Check List
Video recording does not work. GOOGLE map does not display on the screen.
Ch k whether
Check h th SD card d iis inserted
i t d properly.
l GPS module
d l hhas bbuilt
ilt iin th
the GPS mountt hholder.
ld
SD card has its own lifetime. (This is an optional and sold separately)
If it does not work well, replace it with a new one or format Check GPS mount holder cables is connected well.
SD card regularly. Check that there is nothing to block GPS signal reception.
Make sure that there is no connection between navigation
and device by USB cable. Rear camera does not work.
Check whether the R-cam cable is connected well to the product.
Voice recording does not work.
Check there is nothing around camera lens.
Check whether voice REC function is activated.
Check that MIC hole is not blocked by anything. The quality of recording image is shaking during driving.
Check whether the mount holder is fixed well.
There is no power on the device.
device Or else, fix the device firmly into the vehicle by enclosed adhesive tape.
Reconnect the power supply by enclosed cigar lighter.
The recorded image is too blurry.
It cannot copy the files on SD. Check camera lens is clean.
Before using SD card, format it once again. Check vehicle window glass is clean.
51