Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Applications
Shell Omala Oils are formulated using high viscosity Excellent Load Carrying Capacity
index, solvent refined, base oils and incorporate a Reduces gear tooth and bearing wear on both
special sulphur-phosphorus additive to provide an steel and bronze components. The load
extreme pressure performance which allow trouble carrying capacity of Omala, as determined in
free application in following areas: laboratory tests, is significantly better than that
Steel gear transmissions
of leaded gear oils. Gear tooth wear is
reduced, particularly under conditions of high
Industrial gear drives where a full EP load.
performance is required
Typical test results for Omala 220 are :
Bearings
Circulating and splash lubricated systems Extreme Pressure Properties
Timken wear and lubricant testing
For automotive hypoid gears, the appropriate Shell machine
Spirax Oil should be used, as the Omala are not Min OK Load 60 lbs
designed for this purpose. ASTM D 2782
Four Ball Extreme Pressure Test
Weld point 250 kg
ASTM D 2783
Performance Features and Benefits
FZG Load Carrying Test
Outstanding oxidation and thermal stability DIN 51354-2 & ISO 14635-1
Withstands high thermal loading and resists the Failure load stage >12
formation of sludge. Provides extended oil life, FZG A/8.3/90 >12
even with bulk oil temperatures of up to 100°C in FZG A/16.6/90
certain applications.
Effective corrosion inhibition
Specification and Approvals
Protects both steel and bronze components, even Meets ISO 12925-1 Type CKD
in the presence of contamination by water and
solids. DIN 51517- Part 3 (CLP)
These characteristics are typical of current production. Whilst future production will conform
to Shell's specification, variations in these characteristics may occur.