Sei sulla pagina 1di 1

Which of the fotlorving statements is true concerning the remote BOP panel ?

a. The nrasrer valve when operated moves the 3 position valve to the close position
b. The master valve rvhen operated will do a panel light test
\-.c. The master valve must be continually operated while operating the function.
d. Holding the master air valve for 5 seconds then releasing it will allow functions
to take place

Under rvhar circumstances rvould CUP TYPE tester be preferred to TEST


PLUG while testing a surface BOP stack?

There is no difference as they are interchangeable


Vk-" When you require testing entire casing head, outlets & casing to wellhead
seals
c. To test stack without applying excess pressure to weilhead and casing

Which gas is used to pre-charge accumulator bottles?


@
Oxygen L,.b-:-"'- Nitrogen
c. Air d. Hydrogen

Selection of packing element of Annular Preventer is based on rvhich of the


follorving parameters? (Select two answers)

v. .r Minimum and Maximum diameter of pipe


,,hl Type of mud in which it is to be used
c. Required closing pressure
Temperature rating of the element
\y
You close a ram on the Driller's remote BOP control panel. The close light
illuminates but the manifold pressure gauge does not drop. What has happened?

a. Air supply has been lost to the Drillerls.panel , .r+ ,,, r\mrN6\-rqs -Tnfrr
b.n The 4 - way valve on accumulator unit has not operated. -* .-#:i=i'9$Ivl*;"-e'Ixs- es'
t -p.. Blockage in line belween accumulator unit and BOP stack
- d. Forget to hold down tl-re master valve tbr 5 seconds as instructed

AII the ram type BOP's are designed to open when rated working pressure IS

acting from the bottom on the ram w_ith manifold pressure of 1500 psi.
it-.1*p-.tds {h. o?en1o3
a. True False > k-b.t
All pipe ram BOP's are designed to close on rated working pressure in the well
bore with hydraulic operating pressure of 1,500 psi? c-ros '.n3
i+ aeg..-'at on'\kre
a. True . ,"6. False )LoJa;

On the remote panel the high-lorv bypass control valve allows you to put full
accumulator pressure to which of the follolving?

a. Rams only .
b. , Annular onlY
c. All functions ,,{ Rams and HCR valves onlY

''Io}'-e AltJ-s {"*"


- )-6LS tA' P*
'Jt-.-..^-lJ'
"?,ich
-ca-.t-ts-ft6{*
-,t\.'= .r\.r.,,'. lord
fre-es'rre. on
179.
I

Potrebbero piacerti anche