Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MODEL HHC(S)775
Prime Power(60Hz) 620kW/775kVA
Standby Power(60Hz) 680kW/850kVA
Standard Features
● Cummins diesel engine made by CCEC China,
Model:KTA38-G2 With radiator at ambient temperature
40oC, fans are driven by belt, with safety guard, With DC
24V charge alternator.
● Stamford Alternator Model:STAMFORD HCI544F1 , single
bearing alternator; IP23 Protection, Insulation class H
● Stand type control panel with many kinds of Display and
Protection function is equipped
● Two 12V starter maintenance free battery
● Power output MCCB is equipped.
● Accessory: A suit of ripple flex exhaust pipe; exhaust
siphon, muffler; and a set of spare parts & Tools &
Documents.
● The structure is built-up, the built-in residential muffler
makes the noise lower.
● Exhaust guide plate and air channel for air intake&noise
reduction are mounted within soundproof canopies.
● Outside Emergency Stop Button.
● Inside power Cathode switch.
● Outside Fuel Inlet.
● Base Fuel tank is equipped, With lifting ear and forklift
slots. Outside fuel inlet/return, outside lub oil and coolant
drain.
Generator Ratings
Voltage Frequency Power Factor Standby Current Prime Current Standby Power Prime Power
Phases
(V) (Hz) (COS¢) (A) (A) (kW/kVA) (kW/kVA)
440/254 60 3 0.8 1115.2 1016.8 680/850 620/775
400/230 60 3 0.8 1224.0 1116.0 680/850 620/775
380/220 60 3 0.8 1285.2
1171.8 680/850 620/775
220/127 60 3 0.8 2230.4 2033.6 680/850 620/775
Prime Power (PRP): Prime power is available for continuous 12-hours running, in accordance with
GB/T2828,ISO8528; A 10% overload capability is available for a period of 1 hour within a 12-hours period of
operation.
Standby Power Rating (ESP): The standby power rating is applicable for supplying emergency power. No
overload, soundproof gensets only run under rating power.
Sales Promises
● World-famous high-quality engines and alterntors are adopted by HUIHE.
● All the gensets are tested on load before they leave factory, various kinds of functions are tested .
and test reports are provided.
● Warranty for all of our gensets and accessories is according to our standard conditions since testing: 12
months or 1,000 running hours accumutively, subject to the earlier, kindly refer to our service terms.
● Service and parts are available from HUIHE or distributors in your location.
This data sheet is made for reference only, which can be changed without prior notice. HHC(S)775-1
Engine Data
This data sheet is made for reference only, which can be changed without prior notice. HHC(S)775-2
Alternator Data
Compliance with GB755, BS5000, VDE0530, NEMAMG1-22, IED34-1, CSA22.2 and AS1359 standards
This data sheet is made for reference only, which can be changed without prior notice. HHC(S)775-3
Options
● 55℃ high temperature ● Permanent Magnet Gen ● Auto Control Panel ● Daily Fuel Tank
radiator -erator (PMG) ● Auto Transfer Switch(ATS) ● Base Fuel Tank
● Water Separator ● Anti Condensation Heater ● Battery Charge ● Trailer Type
● Water Jacket Heater ● Drop CT(For Paralleling) ● Manual Paralleling System ● automatic input system for
● Oil Heat ● Auto Paralleling System fuel
● Oil Discharging Pump ● electronic indicator for ● Maintenance Tools
fuel level ● Accesory Bag
● Wind Scooper for soundproof
canopy
Open Type
Overall Size L×W×H
4250mm×1630mm×2450mm
Weight
7200Kg
Soundproof Type
Overall Size L×W×H
20"ft container
Weight
12500 Kg
DSEControl
DSE5110
Auto Start Control Module
The DSE5110 is an Automatic Start Generator Controller designed to automatically start and stop
diesel and gas generating sets that include non electronic engines. The Generator Control module also
provides excellent engine monitoring and protection features. The module has the ability to monitor
under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature,
fail to start, fail to stop and loss of the speed sensing signal. The Generator Controller displays fault
conditions on the LCD display and via the LED indicators on the front.
DSEControl
DSE5220
Auto Mains Failure Control Module
The DSE5220 is an Automatic Mains Failure Control Module designed to monitor a mains (utility)
supply and automatically start and stop diesel and gas generating sets that include non electronic
engines. Upon detection of a mains (utility) failure the module automatically starts the generating set.
Once the mains power has been restored the module instructs the generating set to stop. The module
also provides excellent engine monitoring and protection features. The module has the ability to
monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine
temperature, fail to start, fail to stop, under/over generator volts, over current, under/over generator
frequency, low/high DC battery volts, low fuel alarm and loss of the speed sensing signal. The module
displays fault conditions on the LCD display and via the LED indicators on the front of the panel.
The module includes RS232 or RS485 communications capabilities for linking to a PC, sending SMS
messages and interfacing with new and existing building management systems.