Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Contents
First steps 258
Steering mounted controls 260
Menus 261
Navigation 262
Navigation - Guidance 270
Traffic 274
Radio Media 276
Radio 282
DAB (Digital Audio Broadcasting) radio 284
Media 286
Settings 290
Connected services 298
Internet browser 299
MirrorLinkTM 302
CarPlay ® 306
Telephone 310
Frequently asked questions 318
The system is protected in such a way that it will only operate in As a safety measure, the driver should only carry out operations
your vehicle. which require prolonged attention while the vehicle is stationary.
The display of an energy economy mode message signals that
.
electrical systems operating are going into standby.
Refer to the energy economy mode section.
257
Audio and Telematics
First steps
Use the buttons to the left of the touch screen
In very hot conditions, the system may
for access to the menu carousels, then press
go into stand-by (screen and sound
the virtual buttons in the touch screen.
completely off) for a minimum period of
Each menu is displayed in one or two pages
5 minutes.
(primary page and secondary page).
258
Audio and Telematics
* Depending on equipment.
.
259
Audio and Telematics
Press: mute on / off. Radio, rotate: automatic search for Telephone: start or answer a call.
the previous / next station. Call in progress: telephone menu
Radio, press: preset stations. (end call, secret mode, hands-free
Media, rotate: previous / next track. mode).
Increase volume.
Press: confirm a selection. Telephone, press and hold: reject an
incoming call, end a call in progress;
other than call in progress, telephone
Decrease volume. menu.
Radio: display the list of stations.
Media: display the list of tracks.
Change audio source: radio, media. Radio, press and hold: update the list
of stations received.
260
Audio and Telematics
Menus
Navigation Radio Media Settings
(Depending on equipment)
Enter navigation settings and choose a Select an audio source, a radio station, display Adjust the settings for sound (balance,
destination. photographs. ambience, ...) and the display (language, units,
date, time, ...).
Connect using the "Internet browser". Connect a telephone by Bluetooth ®. Access to the trip computer.
Operate certain applications on your Access to the CarPlay ® function after Activate, deactivate or enter settings for certain
smartphone via MirrorLinkTM or CarPlay ®. connection of your smartphone by USB cable. vehicle functions.
.
261
Audio and Telematics
Navigation
Level 1 Level 2 Level 3
Navigation Route settings
262
Audio and Telematics
Zoom in.
.
Display in full screen mode.
Use the arrows to move the map.
Switch to 2D map.
263
Audio and Telematics
Contacts
264
Audio and Telematics
Town center
Address
Save Save the current address.
Addresses
Navigation
View
Secondary page
Contacts Navigate to Select a contact then calculate the route.
Enter destination
Search for contact
Call
On the map Display the map and zoom to view the roads.
.
265
Audio and Telematics
266
Audio and Telematics
Select all
Navigation
Delete Choose the display settings for POIs.
Secondary page
Import POIs
Show POIs
Confirm Save the options.
.
267
Audio and Telematics
Diversion
Traffic messages
Map settings
Map settings
Navigation
Settings
Settings
Moving
between
Settings
the two
menus.
268
Audio and Telematics
Around vehicle
Navigation
Settings for the choice of messages and the
Near destination
Secondary page filter radius.
Detour over a distance
Traffic messages Detour
Recalculate route
Perspective view
Navigation
Choose the display and orientation of the
Maps
Secondary page map.
"Day" map colour
Map settings
Aspect "Night" map colour
Auomatic day/night
Route settings
Navigation Voice Enter settings and choose the volume for the
Secondary page Alarm! voice and announcement of street names.
Navigation - Guidance
Choosing a new destination
Towards a new destination
Press on Navigation to display the Select "Save" to save the address To delete navigation information,
primary page. entered as a contact entry. press on "Settings".
The system allows up to 200 entries.
Press on the secondary page. Press on "Stop navigation".
Or
Press on "Show route on map" to
start navigation.
270
Audio and Telematics
.
271
Audio and Telematics
Towards GPS coordinates Towards a point on the map Towards points of interest (POI)
Press on Navigation to display the Press on Navigation to display the Points of Interest (POI) are listed in different
primary page. primary page. categories.
Press on the secondary page. Press on the secondary page. Press on Navigation to display the
primary page.
Select "Enter destination". Select "Enter destination". Press on the secondary page.
Select "Address". Select "On the map". Select "Search for POI".
Enter the "Longitude:" Zooming in on the map shows points with Select "All POIs",
then the "Latitude:". information.
272
Audio and Telematics
.
273
Audio and Telematics
Traffic
Risk areas / Danger zone Traffic information
alert settings Display of messages
Press on Navigation to display the
Press on Navigation to display the primary page.
This series of alerts and displays is
primary page.
only available if Risk areas have first
been downloaded and installed on the Press on the secondary page.
Press on the secondary page. system.
Select "Confirm".
274
Audio and Telematics
.
- 12 miles (20 km) in urban areas,
Normal playback of the audio source
- 30 miles (50 km) on motorways.
resumes at the end of the transmission
of the message.
275
Audio and Telematics
Radio Media
Level 1 Level 2
List of FM stations
Save
276
Audio and Telematics
Radio Media
List of FM stations Press on a radio station to select it.
List
FM Radio
DAB Radio
AM Radio
USB
CD
Radio Media
MirrorLinkTM Select change of source.
Source
CarPlay ®
iPod
Bluetooth
AUX
Jukebox
Radio Media
Press an empty location to Save it.
Save
.
277
Audio and Telematics
List of FM stations
Media Photos
278
Audio and Telematics
Sort by folder
Select all
Radio Media
Copy Copy files to the Jukebox.
Rename
Manage Jukebox Choose the desired function.
.
Magnifying glass Delete
Select all
Media
Settings
Settings
Settings
280
Audio and Telematics
Radio Media
Media list
Media
Shuffle (current album)
Choose the play settings.
Settings
Repeat
Aux. amplification
RDS options
Radio Media DAB/FM station tracking
Radio
Activate or deactivate the settings.
Secondary page Display Radio Text
Settings
Settings Digital radio slideshow
display
.
Flash - Unforeseen
events
281
Audio and Telematics
Radio
Selecting a station Changing a radio frequency
Press on Radio Media to display the Select "Save". Press on Radio Media to display the
primary page. primary page.
282
Audio and Telematics
.
To change radio station press the name of the
desired station.
283
Audio and Telematics
Display of options:
If the "DAB" radio station being listened to is not
if active but not available, the display will be greyed out,
available on "FM", the "DAB FM" option is greyed out.
if active and available, the display will be blank.
Journaline ® is a text-based information service designed for digital radio systems.
It provides text-based information structured around topics and sub-topics.
This service is available from the "LIST OF DAB STATIONS" page.
284
Audio and Telematics
Press on Radio Media to display the Press on Radio Media to display the
If the "DAB" station being listened to
primary page. primary page.
is not available on "FM" ("DAB/FM"
option greyed out), or "DAB/FM station
Select change of source. Press on the secondary page. tracking" is not activated, the sound
will cut out while the digital signal is too
weak.
Select "DAB Radio". Select "Settings".
.
page.
285
Audio and Telematics
Media
USB player Auxiliary (AUX) socket Selecting the source
Press on Radio Media to display the
primary page.
Insert the USB memory stick into the USB port Connect the portable device (MP3 player…) to
or connect the USB device to the USB port the auxiliary Jack socket using an audio cable
using a suitable cable (not supplied). (not supplied).
The system builds playlists (in temporary First adjust the volume of your portable device
memory), an operation which can take from (to a high level). Then adjust the volume of your
a few seconds to several minutes at the first audio system. Choose the source.
connection. Display and management of the controls are
Reduce the number of non-music files and the via the portable device.
The steering mounted SRC (source)
number of folders to reduce the waiting time.
button can be used to go to the next
The playlists are updated every time the
media source, available if the source
ignition is switched off or connection of a USB
memory stick. The lists are memorised: if they
CD player is active.
Insert the CD in the player.
are not modified, the subsequent loading time Press on OK to confirm the selection.
will be shorter.
286
Audio and Telematics
.
287
Audio and Telematics
288
Audio and Telematics
Or
"Sort by album".
.
289
Audio and Telematics
Settings
Level 1 Level 2 Level 3
Audio settings
Audio settings
Audio settings
290
Audio and Telematics
Settings
Function that turns off the display.
Pressing the screen reactivates it.
Turn off screen
.
291
Audio and Telematics
Level 1 Level 2
Units
Factory settings
Display screen
292
Audio and Telematics
Settings
Secondary page Confirm Set the date and time then confirm.
Time/Date
Secondary page Activate animations Activate or deactivate the setting then confirm.
Screen settings
Confirm
.
293
Audio and Telematics
Level 1 Level 2
Choice of language
Configuration Calculator
Calendar
294
Audio and Telematics
Settings
Languages
Settings
Calculator
Settings
Calendar
.
295
Audio and Telematics
Audio settings
Press on Settings to display the
The distribution (or spatialisation using On-board audio: Arkamys © Sound
primary page.
the Arkamys ® system) of sound is an Staging optimises sound distribution in
audio process that allows the audio the the passenger compartment.
Select "Audio settings". quality to be adapted to the number of
passengers in the vehicle.
Available only with the 6-speaker
Select "Ambience" configuration.
296
Audio and Telematics
Press on Settings to display the Press on Settings to display the Press on Settings to display the
primary page. primary page. primary page.
Press on the secondary page. Press on the secondary page. Press on the secondary page.
Select "System Settings". Select "Screen settings". Select "Time/Date" to change the
time zone, synchronisation with GPS,
the time and its format, then the date.
.
to the original settings.
297
Audio and Telematics
Connected services
Level 1 Level 2 Level 3
298
Audio and Telematics
Internet browser
Press on Connected services to
display the primary page.
.
299
Audio and Telematics
Level 1 Level 2
Bluetooth (devices)
Usage monitor
Internet connection settings
Wi-Fi connection
300
Audio and Telematics
Connected services
Reset
Secondary page Reset the usage monitor, them confirm.
Confirm
Transfer rate
Connected services
Remember Memorise the selected Wi-Fi network(s).
Secondary page
Add Add a new Wi-Fi network.
Wi-Fi connection
.
On/ Off Activate or deactivate a Wi-Fi network.
MirrorLinkTM
302
Audio and Telematics
.
in your country. Voice recognition requires a compatible
start the application in the
smartphone connected to the vehicle by
system.
Bluetooth.
303
Audio and Telematics
304
Audio and Telematics
.
305
Audio and Telematics
CarPlay®
306
Audio and Telematics
CarPlay® smartphone
connection
Connect a USB cable. The Voice recognition
As a safety measure and because it
smartphone charges when
requires sustained attention by the Press the end of the lighting control stalk to
connected by a USB cable.
driver, using a smartphone when start voice recognition of your smartphone via
driving is prohibited. On connecting the USB cable, the the system.
All operations must be done with the "Telephone" function changes to
vehicle stationary. "CarPlay" in the menu carrousel.
Press on "CarPlay" to display the
CarPlay ® interface.
The synchronisation of a
smartphone allows applications on a Or
smartphone that are adapted to the
CarPlay ® technology to be displayed in Connect the USB cable. The
the vehicle's screen. smartphone is charged while
As the principles and standards are connected by the USB cable.
constantly evolving, it is recommended
that you update the operating system of From the system, press on
your smartphone. "Connected services" to display the
For the list of eligible smartphones, primary page.
connect to the brand's internet website
Press on "CarPlay" to display the
in your country.
CarPlay ® interface.
.
can only be viewed with the vehicle screen pages relating to certain
stationary; display is interrupted once functions are displayed on connection.
the vehicle is moving.
307
Audio and Telematics
308
Audio and Telematics
Messages
Lists
.
messages.
Telephone
Level 1 Level 2 Level 3
Call log
Contacts
310
Audio and Telematics
Incoming calls
Outgoing calls
Telephone
Contacts After making choices, start the call.
Call log
View
Magnifying glass
Create
Call
Addresses
Create
Modify
Delete
View
Telephone Delete all
After making choices, start the call.
Contacts By name
Confirm
Navigate to
Call
.
311
Audio and Telematics
Bluetooth (devices)
Telephone Options
312
Audio and Telematics
Telephone
Telephone
connection
Secondary page Devices detected Audio streaming Start the search for peripheral devices.
Search for
Internet
devices
.
Bluetooth contacts.
313
Audio and Telematics
Pairing a Bluetooth®
telephone
For reasons of safety and because they
Procedure from the system
require prolonged attention on the part Activate the telephone's Bluetooth function Select the name of the
of the driver, the operations for pairing and ensure that it is "visible to all" (telephone desired peripheral from the
the Bluetooth mobile telephone to the configuration). list and "Confirm".
hands-free system of the audio system
must be carried out with the vehicle Press on Telephone to display the
stationary. primary page. Enter a code of at least 4 figures for
the connection then "Confirm".
314
Audio and Telematics
Connecting a Bluetooth®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone
The services available depend on Depending on the type of telephone, connected when the ignition was last switched
the network, the SIM card and the the system will ask you to accept or not off is automatically reconnected, if this
compatibility of the Bluetooth telephone the transfer of your contacts. connection mode had been activated during the
used. Check the telephone manual and If not, select "Update". pairing procedure.
with your network provider for details of
The connection is confirmed by the display of a
the services available to you.
message and the name of the telephone.
Manual connection
On return to the vehicle, if the last telephone
The ability of the system to connect Press on Telephone to display the
connected is present again, it is reconnected
with only one profile depends on the primary page.
automatically and within around 30 seconds
telephone. The three profiles may all
after switching on the ignition the pairing is
connect by default. Press on the secondary page.
done without any action on your part, with
(Bluetooth activated).
Visit www.peugeot.co.uk for more information To modify the automatic connection mode,
(compatibility, additional help, ...). select the telephone in the list then select the Select "Bluetooth" to display the list
desired profile. of paired peripherals.
The recognised telephone
appears in the list. Select the peripheral to connect.
.
Depending on your telephone, you may be
asked to accept automatic connection every
The connection is confirmed by the display of a
time the ignition is switched on.
message and the name of the telephone.
315
Audio and Telematics
Calling a contact
Press on Telephone to display the
Or
primary page.
"Connect / Disconnect" to start or
end the Bluetooth connection with
the selected device. Or make a long press
Or
"Delete" to delete the pairing. on the steering mounted TEL button.
316
Audio and Telematics
Select "Contacts". Press on Telephone to display the Select "By name" to view the list of
primary page. contacts.
Select the desired contact from the list offered. Select "Contacts".
Select "Call".
Select "View".
Or
Select the desired contact from the list offered. "Delete" to delete the selected
contact.
It is always possible to make a call
directly from the telephone; park the
Or
vehicle first as a safety measure.
"Delete all" to delete all information
.
for the selected contact.
317
Audio and Telematics
Navigation
QUESTION ANSWER SOLUTION
The route calculation is not The route settings may conflict with the current location (exclusion of Check the route settings in the "Navigation"
successful. toll roads on a toll motorway). menu.
The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.
The Risk areas audible The audible warning is not active. Activate audible warnings in the "Navigation"
warning does not work. menu.
The system does not The guidance criteria do not take account of TMC messages. Select the "Information" function in the list of route
suggest a detour around an settings.
incident on the route.
I receive a Risk areas alert Other than guidance, the system announces all Risk areas Zoom in on the map to view the exact position of
which is not on my route. positioned in a cone located in front of the vehicle. It may provide an the Risk areas. Select "On the route" to no longer
alert for Risk areas located on nearby or parallel roads. receive alerts other than navigation instructions or
to reduce the time for the announcement.
318
Audio and Telematics
In certain countries, only major routes (motorways...) are listed for This phenomenon is normal. The system is
the traffic information. dependent on the traffic information available.
The altitude is not On starting, the initialisation of the GPS may take up to 3 minutes to Wait until the system has started up completely so
displayed. receive more than 4 satellites correctly. that there is GPS coverage by at least 4 satellites.
Depending on the geographical environment (tunnel...) or the This phenomenon is normal. The system
weather, the conditions of reception of the GPS signal may vary. is dependent on the GPS signal reception
conditions.
.
319
Audio and Telematics
Radio
QUESTION ANSWER SOLUTION
The quality of reception of The vehicle is too far from the transmitter used by the station Activate the "RDS" function by means of the
the radio station listened listened to or there is no transmitter in the geographical area short-cut menu to enable the system to check
to gradually deteriorates through which the vehicle is travelling. whether there is a more powerful transmitter in
or the stored stations do the geographical area.
not function (no sound,
87.5 Mhz is displayed...). The environment (hills, buildings, tunnels, basement car parks...) This phenomenon is normal and does not indicate
block reception, including in RDS mode. a fault with the audio system.
The aerial is absent or has been damaged (for example when going Have the aerial checked by a PEUGEOT dealer.
through a car wash or into an underground car park).
I cannot find some radio The station is not received or its name has changed in the list. Press and hold the "List" button at the steering
stations in the list of mounted controls to update the list of stations
stations received. received or press on the system update function:
Some radio stations send other information in place of their name "Update list".
(the title of the song for example).
The name of the radio The system interprets this information as the name of the station.
station changes.
320
Audio and Telematics
Media
QUESTION ANSWER SOLUTION
Playback of my USB Some files supplied with the memory stick may greatly slow down Delete the files supplied with the memory stick
memory stick starts only access to reading the memory stick (multiplication by 10 of the and limit the number of sub-folders in the file
after a very long wait catalogue time). structure on the memory stick.
(around 2 to 3 minutes).
When I connect my iPhone When the iPhone connects automatically as a telephone, it forces Disconnect and reconnect to the USB port
as a telephone and to the the streaming function. The streaming function takes the place of (the USB function takes priority over streaming).
USB port at the same time, the USB function which is then not useable, there is a period without
I am unable to play the sound of the track being played with Apple ® players.
music files.
The CD is ejected The CD is inserted upside down, is unplayable, does not contain any Check that the CD is inserted in the player the
automatically or is not audio data or contains an audio format which the player cannot play. right way up.
played by the player. Check the condition of the CD: the CD cannot be
The CD has been recorded in a format that is not compatible with the player (udf...). played if it is too badly damaged.
Check the content in the case of a recorded CD:
The CD is protected by an anti-pirating protection system which is refer to the advice in the "AUDIO" section.
not recognised by the audio system. The audio system's CD player does not play
DVDs.
Some recorded CDs will not be played by the
audio system because they are not of adequate
quality.
There is a long waiting When a new medium is inserted, the system reads a certain This phenomenon is normal.
period following the insertion amount of data (directory, title, artist, etc.). This may take from a few
.
of a CD or connection of a seconds to a few minutes.
USB memory stick.
321
Audio and Telematics
The audio equipment settings (bass, treble, ambiences) are Set the treble or bass level to 0, without selecting
unsuitable. an ambience.
Some characters in the The audio system does not display some types of characters. Use standard characters to name tracks and
media information are not folders.
displayed correctly while
playing.
Playing of streaming files The peripheral device connected does not support automatic play. Start the playback from the device.
does not start.
The names of tracks and The Bluetooth profile does not allow the transfer of this information.
the track length are not
displayed on the screen
when streaming audio.
322
Audio and Telematics
Settings
QUESTION ANSWER SOLUTION
In changing the setting The selection of an equalizer setting imposes the balance settings. Modify the balance or equalizer settings to obtain
of treble and bass the Modifying one without the other is not possible. the desired musical ambience.
equalizer setting is
deselected.
When changing the The selection of a distribution setting imposes the balance settings. Modify the balance or distribution settings to
balance settings, the Modifying one without the other is not possible. obtain the desired musical ambience.
distribution setting is
deselected.
When changing an
distribution setting,
the balance setting is
deselected.
.
323
Audio and Telematics
With the engine off, the When the engine is switched off, the system's operating time Start the vehicle's engine to increase the battery
system switches off after a depends on the state of charge of the battery. charge.
few minutes of use. The switch-off is normal: the system switches to economy mode and
switches off to prevent discharging of the vehicle's battery.
324
Audio and Telematics
Telephone
QUESTION ANSWER SOLUTION
I cannot connect my The telephone's Bluetooth function may be switched off or the Check that your telephone's Bluetooth function is
Bluetooth telephone. telephone may not be visible. switched on.
Check in the telephone settings that it is "visible
to all".
The Bluetooth telephone is not compatible with the system. You can check the compatibility of your
telephone at www.peugeot.co.uk (services).
The volume of the The volume depends both on the system and on the telephone. Increase the volume of the audio system, to
telephone connected maximum if required, and increase the volume of
in Bluetooth mode is the telephone if necessary.
inaudible.
The ambient noise level has an influence on the quality of Reduce the ambient noise level (close the
telephone communication. windows, reduce the booster fan speed, slow
down...).
Some contacts are The options for synchronizing contacts are synchronizing the Select "Display SIM card contacts" or "Display
duplicated in the list. contacts on the SIM card, the contacts on the telephone, or both. telephone contacts".
When both synchronizations are selected, some contacts may be
duplicated.
Contacts are not shown in Some telephones offer display options. Depending on the settings Modify the display setting in the telephone
alphabetical order. chosen, contacts can be transferred in a specific order. directory.
.
The system does not The Bluetooth mode does not permit sending SMS text messages
receive SMS text messages. to the system.
325
Audio and Telematics
Contents
First steps 328
Steering mounted controls 329
Radio 330
Media 332
Telephone 336
Audio settings 339
Configuration 340
Screen menu map(s) 341
Frequently asked questions 342
.
327
Audio and Telematics
First steps
On / Off, volume adjustment. Automatic search for a lower radio Automatic search for a higher radio
frequency. frequency.
Select the previous CD, USB track. Select the next CD, USB track.
Navigation in a list. Navigation in a list.
Press and hold: fast back. Press and hold: fast forward.
Select the source:
Radio: FM1, FM2, AM, CD, USB, Open the main menu.
AUX, Streaming.
Telephone: accept an incoming call.
Telephone, press and hold: end Display the list of stations received,
the CD/USB tracks or folders. Select a preset radio station.
a call, access the calls log for the
Press and hold: update the list of Radio, press and hold: preset a radio
connected telephone.
stations received. station.
Other than radio: see the
corresponding sections.
Adjust audio settings: sound
ambience, treble, bass, loudness,
Abandon the current operation. Eject CD.
distribution, left/right balance, front/
Go up one level (menu or folder).
rear balance, automatic volume.
328
Audio and Telematics
.
329
Audio and Telematics
Radio
Presetting a station Managing a list Entering a frequency
Press SRC/TEL repeatedly to select Press LIST to display the list of Press on MENU.
the FM1, FM2 or AM waveband. stations received in alphabetical
order.
Select "Radio".
Press and hold one of the buttons to Select the desired radio station using
preset the station being listened to. one of the buttons.
The name of the station is displayed
and an audible signal confirms the Select "Write freq.".
preset.
Confirm with "OK".
Press +.
The exterior environment (hills, buildings,
tunnel, car park, below ground...) may
Briefly press one of the buttons to
prevent reception, even in RDS station
change to the next or previous letter.
tracking (alternative frequencies) mode. This or
phenomenon is normal in the propagation of
radio waves and is in no way indicative of a press - to select the desired
fault with the audio system. Press and hold on LIST to build or frequency.
update the list of stations; audio
reception is cut momentarily.
Confirm with "OK".
Selecting a station
Press a button to listen to the
corresponding preset station.
330
Audio and Telematics
.
setting.
331
Audio and Telematics
Media
USB player
This unit comprises a USB port Press LIST to display the structure of
and a Jack auxiliary socket, the folders in the compilation.
depending on model.
Select a line in the list.
The system constitutes playlists (in Connect a USB memory stick to the USB port
temporary memory) the creation time or connect a USB device to the USB port using
for which can be from a few seconds to a suitable cable (not supplied). Up a level in the menu.
several minutes at the first connection.
Limiting the number of non-music files Press SRC/TEL repeatedly to
and the number of folders reduces this select "USB".
waiting time. The playlists are updated
every time the ignition is switched off or Press MENU.
a USB memory stick is connected. Press one of these buttons to select
The lists are memorised: if there is no the next or previous track in the list.
change in the lists, the next loading Select "Media".
time will be shorter.
Press one of these buttons to select
the next or previous folder in the Select or deselect "TA" to switch
order chosen. traffic announcements on or off.
At a first connection, the order
suggested is by folder. When
Press and hold one of these buttons Select the play mode: "Normal",
connecting again, the order previously
for fast forward or back. "Random", "Random all" or
chosen is retained.
"Repeat".
332
Audio and Telematics
.
for fast forward or back.
333
Audio and Telematics
334
Audio and Telematics
Connect the telephone: see the "Telephone" Control of playback is via the audio system. The control
section. of common tracks is possible via the audio system
control buttons and the steering mounted controls**.
Contextual information can be displayed in the screen.
In the "Bluetooth: Audio" menu, select the
telephone to connect.
The audio quality depends on the quality of the Connect the Apple ® player to the USB port
The audio system connects automatically to a
transmission from the telephone. using a suitable cable (not supplied).
newly paired telephone.
Play starts automatically.
* In certain cases, the play of audio files must
be initiated from the keypad. Management of the device is via the audio
** If the telephone supports the function. system controls.
.
335
Audio and Telematics
Telephone
Pairing a Bluetooth® telephone
A window is displayed with "Searching A virtual keypad is displayed on the
For safety reasons and because they
device". screen: choose a 4 digit code.
require prolonged attention on the part
of the driver, the operations for pairing
of the Bluetooth mobile telephone Confirm with "OK".
with the Bluetooth hands-free system The services available depend on
of your audio system must be carried the network, the SIM card and the
out with the vehicle stationary and the compatibility of the Bluetooth telephone
ignition on. used.
A message is displayed in the screen of the
Consult your telephone's manual and
telephone: enter the same code and confirm.
your operator to find out which services
Visit www.peugeot.co.uk for more information are available to you. If pairing fails, try again; the number of attempts is not limited.
(compatibility, more help, ...).
A message appears in the screen to confirm
Select the telephone to be paired the result of the connection.
Activate the telephone's Bluetooth function and from the list.
ensure that it is set as visible to all (refer to the Pairing can also be initiated from the
telephone instructions). Confirm with "OK". telephone by searching for detected
Bluetooth devices.
Press the MENU button.
Only one telephone can be paired at a time. The directory and the calls list can be
accessed after the synchronisation
Select "Bluetooth". period (if the telephone is compatible).
In some cases, the Bluetooth address of the Automatic connection must be
telephone may appear instead of the name of configured in the telephone to allow
the telephone. the connection each time the vehicle is
Select "Search". started.
336
Audio and Telematics
Select "Bluetooth".
"OK" to confirm the choice. Select "Telephone".
.
337
Audio and Telematics
Press SRC/TEL.
For access to the calls list, it is also "OK" starts the call.
possible to press MENU, select
"Telephone", then select "Call", and or
finally select "Calls list". select "YES" to accept the call,
Scroll through the calls list. Pressing and holding the back
button,
or
Confirm with "OK".
on SRC/TEL also rejects an
incoming call.
*D
epending on the compatibility of the
telephone.
338
Audio and Telematics
Audio settings
Managing calls
Hang up Combined mode Press ¯ to display the audio settings
In the contextual menu, select "Hang (to leave the vehicle without ending the call) menu.
up" to end the call. Press ¯ to go to the next setting.
.
339
Audio and Telematics
Configuration
Display and language settings
Press the MENU button.
Select "Config.".
340
Audio and Telematics
Deutsch
3
TA Call
2 2
English
3
RDS Directory
2 3
Español
3
TXT Calls list
2 3
Français
3
Write freq. Missed calls
2 4 Italiano
3
Dialed calls
4 Nederlands
Media 3
1 Answered calls
4 Português
3
Normal Phone status
2 2 Português-Brasil
3
2
Random all
BT management Türkçe
3
2
Repeat Version
2 Search 2
2
TA System
2 Config. 2
1
Unit
2
.
Displaying
2 Celsius
3
Scrolling text
3 Fahrenheit
3
341
Audio and Telematics
There is a difference in For optimum sound quality, the audio settings (volume, bass, Check that the audio settings (volume, bass,
sound quality between the treble, ambience, loudness) can be adapted to the different sound treble, ambience, loudness) are adapted to the
different audio sources sources, which may result in audible differences when changing sources listened to. It is advisable to adjust
(radio, CD...). source (radio, CD...). audio settings (bass, treble, Front-Rear balance,
Left-Right balance) to the middle position, select
the musical ambience and set the loudness
correction to the "Active" position in CD mode or
to the "Inactive" position in radio mode.
When changing the Choosing an ambience imposes settings for treble and bass. Modify the treble and bass settings or the
settings for treble and Modifying one without the other is only possible with a personalised ambience setting to obtain the desired sound
bass, the ambience setting ambience. quality.
is deselected.
When changing the
ambience setting, treble
and bass are reset
to zero.
When changing the Choosing the "driver" distribution setting imposes a balance setting. Modify the balance setting or the distribution
balance setting, setting to obtain the desired sound quality.
distribution is deselected.
342
Audio and Telematics
The quality of reception of The vehicle is too far from the transmitter used by the station Activate the RDS function to enable the system
the radio station listened listened to or there is no transmitter in the geographical area to check whether there is a more powerful
to gradually deteriorates through which the vehicle is travelling. transmitter in the geographical area.
or the stored stations do
not function (no sound,
87.5 MHz is displayed...). The environment (hills, buildings, tunnels, basement car parks...) This phenomenon is normal and does not
block reception, including in RDS mode. indicate a failure of the audio equipment.
The aerial is absent or has been damaged (for example when going Have the aerial checked by a PEUGEOT dealer.
through a car wash or into an underground car park).
Sound cut-outs of 1 to During this brief sound cut-out, the RDS searches for any frequency Deactivate the RDS function if the phenomenon
2 seconds in radio mode. permitting better reception of the station. is too frequent and always on the same route.
Traffic announcement The radio station does not broadcast traffic information. Tune to a radio station which broadcasts traffic
TA is displayed. I do information.
not receive any traffic
information.
The stored stations are not An incorrect waveband is selected. Press the SRC/TEL button to return to the
found (no sound, waveband (FM1 or FM2) on which the stations
.
87.5 MHz is displayed...). are stored.
343
Audio and Telematics
The CD is ejected The CD is inserted upside down, is unplayable, does not contain - Check that the CD is inserted in the player
automatically or is not any audio data or contains an audio format which the player cannot the right way up.
played by the player. play. - Check the condition of the CD: the CD
The CD is protected by an anti-pirating protection system which is cannot be played if it is too damaged.
not recognised by the audio equipment. - Check the content in the case of a recorded
CD: consult the advice in the "Audio" section.
- The audio equipment's CD player does not
play DVDs.
- Due to their quality level, certain writeable
CDs will not be played by the audio system.
The CD player sound is The CD used is scratched or of poor quality. Insert good quality CDs and store them in
poor. suitable conditions.
The audio settings (bass, treble, ambience) are unsuitable. Set the treble or bass level to 0, without selecting
an ambience.
The Bluetooth connection The battery of the peripheral may not be sufficiently charged. Recharge the battery of the peripheral device.
is cut.
The message "USB device The USB memory stick is not recognised. Use only USB memory sticks formatted to FAT32
error" is displayed on the (28-bit file allocation table).
screen.
A telephone connects Automatic connection overrides manual connection. Modify the telephone settings to remove
automatically, automatic connection.
disconnecting another
telephone.
344
Audio and Telematics
An iPod is not recognised The iPod is of a generation that is not compatible with the USB
when connecting to the connection.
USB port.
The hard disk or device Some hard disks and devices need a power supply greater than is Connect the device to the 230 V socket, the 12 V
is not recognised when provided by the audio system. socket or an external power supply.
connecting to the USB Caution: ensure that the device does not
port. transmit a voltage greater than 5 V (risk of
destruction of the system).
When streaming, the Some telephones prioritise connection of the "hands-free" profile. Delete the "hands-free" connection profile to
sound cuts momentarily. improve streaming.
In "Random all" play, not In "Random all" play, the system can only take into account up
all of the tracks are played. to 999 tracks.
With the engine off, the When the engine is switched off, the audio system operating time Start the vehicle's engine to increase the battery
audio system switches off depends on the battery charge. charge.
after a few minutes of use. The switch-off is normal: the audio system switches to economy
mode and switches off to prevent discharging the vehicle's battery.
The message "the audio In order to protect the installation if the surrounding temperature Switch the audio system off for a few minutes to
system is overheated" is too high, the audio system switches to an automatic thermal allow the system to cool.
.
appears on the display. protection mode leading to a reduction of the volume or stopping of
the playing of the CD.
345
Audio and Telematics
Audio system
Contents
First steps 348
Steering mounted controls 349
Radio 350
Media 352
Audio settings 354
Screen menu map(s) 355
Frequently asked questions 356
.
347
Audio and Telematics
First steps
On / Off, volume adjustment. Display the list of stations received, Automatic search step by step for a
the CD/MP3 tracks or folders. higher radio frequency.
Press and hold: update the list of Select the next CD track.
stations received. Navigation in a list.
Press and hold: fast forward.
Selection of source:
FM1, FM2, AM, CD, AUX. Manual search step by step for a Open the main menu.
higher radio frequency.
Select the next MP3 track.
Adjust audio settings: Navigation in a list.
sound ambience, treble, bass,
loudness, left/right balance,
Manual search step by step for a Select a preset radio station.
automatic volume.
lower radio frequency. Radio, press and hold: preset a radio
Select the previous MP3 track. station.
Navigation in a list.
Automatic search for a lower/higher
radio frequency.
Select the next CD track. Abandon the current operation. Eject CD.
Navigation in a list. Go up one level (menu or folder).
Press and hold: fast forward or back.
348
Audio and Telematics
.
349
Audio and Telematics
Radio
Presetting a station Managing the list RDS
Press the SRC/BAND button Press LIST to display the list of
RDS, if displayed, enables you to continue
repeatedly to select the FM1, FM2 or stations received, in alphabetical
listening to the same station by automatic
AM waveband. order.
retuning to alternative frequencies.
However, in certain conditions, coverage
Press and hold a button to preset the Select the desired radio station by by an RDS station may not be assured
station being listened to. The name pressing one of the buttons. throughout the country as radio stations
of the station is displayed and an do not cover 100 % of the territory. This
audible signal confirms that it has explains the loss of reception of the
been preset. station during a journey.
Confirm with OK.
Press MENU.
The external environment (hills,
buildings, tunnels, basement car
Briefly press one of the buttons to
parks) may block reception, including
change to the next or previous letter. Select "Radio".
in RDS mode. This is a normal effect
of the way in which radio waves are
transmitted and does not indicate any
failure of the audio equipment. Press and hold on LIST to construct
Confirm with OK.
or update the list of stations; the
sound is interrupted temporarily.
350
Audio and Telematics
Receiving TA messages
Select "On" or "Off" to switch RDS Select "On" or "Off" to switch
The TA (Traffic Announcement)
on or off. on or off the reception of traffic
function gives priority to TA alert
announcements.
messages. To operate, this function
Confirm with OK. needs good reception of a radio station Confirm with OK.
transmitting this type of message.
When a traffic report is transmitted, the
current audio source (Radio, CD, ...)
is interrupted automatically to play the
TA message. Normal playback of the
audio source resumes at the end of the
transmission of the message.
Press MENU.
Select "Radio".
.
Confirm with OK.
351
Audio and Telematics
Media
Display RADIO TEXT Auxiliary socket (AUX) CD player
Insert a CD into the player, play starts
Radio Text is information transmitted
automatically.
by the radio station on the station or on
Insert an MP3 compilation in the CD player.
the song being played.
The audio system searches for audio tracks,
which can take from a few to several dozen
seconds before play starts.
Press MENU.
352
Audio and Telematics
.
353
Audio and Telematics
Audio settings
Information and advice
The audio system can only play files with Playlists accepted are types .m3u and .pls. Press ¯ to display the audio settings
".mp3", ".wma" or ".wav" extensions. The system can recognise up to 5 000 files in menu.
500 folders on 8 levels.
The settings available are:
- AMBIANCE,
It is advisable to restrict file names to On a given disc, the CD player can read up to - BASS,
20 characters without using special characters 255 MP3 files spread over 8 levels. However, - TREBLE,
(e.g. " ? ; ù) to avoid any playing or displaying it is advisable to keep to a limit of two levels - LOUDNESS,
problems. to reduce the access time before the CD is - BALANCE (L/R),
played. - AUTO VOLUME.
The folder structure is not observed during
playback. Select the settings to adjust.
354
Audio and Telematics
Traffic SCROLLING
2 2
RDS
2
TEXT INFO
2
Unit
1
Media Celsius
1 2
Play Fahrenheit
2
2
Normal
3
Random
3
Repeat
3
TEXT INFO
2
.
355
Audio and Telematics
There is a difference in For optimum sound quality, the audio settings (Volume, Bass, Check that the audio settings (Volume, Bass,
sound quality between the Treble, Ambiance, Loudness) can be adapted to the different sound Treble, Ambiance, Loudness) are adapted to
different audio sources sources, which may result in audible differences when changing the sources listened to. It is advisable to set
(radio, CD...). source (radio, CD...). the AUDIO functions (Bass, Treble, Front-Rear
Fader, Left-Right Balance) to the middle position,
select the musical ambience "None" and set the
loudness correction to the "Active" position in CD
mode or to the "Inactive" position in radio mode.
When changing the Choosing an ambiance imposes settings for treble and bass. Modify the treble and bass settings or the
settings for treble and Modifying one without the other is not possible. ambiance setting to obtain the desired sound
bass, the ambiance setting quality.
is deselected.
When changing the
ambiance setting, treble
and bass are reset to zero.
356
Audio and Telematics
The quality of reception of The vehicle is too far from the transmitter used by the station Switch on the RDS function to enable the system
the radio station listened listened to or there is no transmitter in the geographical area to check whether there is a more powerful
to gradually deteriorates through which the vehicle is travelling. transmitter in the geographical area.
or the stored stations do
not function (no sound,
87.5 MHz is displayed...).
The environment (hills, buildings, tunnels, basement car parks...) This phenomenon is normal and does not
block reception, including in RDS mode. indicate a failure of the audio equipment.
The aerial is absent or has been damaged (for example when going Have the aerial checked by a PEUGEOT dealer.
through a car wash or into an underground car park).
Sound cut-outs of 1 to During this brief sound cut-out, the RDS searches for any frequency Switch off the RDS function if the phenomenon is
2 seconds in radio mode. permitting better reception of the station. too frequent and always on the same route.
The traffic announcement The radio station does not broadcast traffic information. Tune to a radio station which broadcasts traffic
(TA) is displayed. I do information.
not receive any traffic
information.
The stored stations are not An incorrect waveband is selected. Press the SRC button to return to the waveband
found (no sound, 87.5 MHz (AM, FM1, FM2) on which the stations are stored.
is displayed...).
.
357
Audio and Telematics
The CD is ejected The CD is inserted upside down, is unplayable, does not contain - Check that the CD is inserted in the player
automatically or is not any audio data or contains an audio format which the player cannot the right way up.
played by the player. play. - Check the condition of the CD: the CD
The CD is protected by an anti-pirating protection system which is cannot be played if it is too damaged.
not recognised by the audio equipment. - Check the content in the case of a recorded
CD: consult the advice in the "Audio" section.
- The audio system's CD player does not play
DVDs.
- Due to their quality level, certain writeable
CDs will not be played by the audio system.
The CD player sound is The CD used is scratched or of poor quality. Insert good quality CDs and store them in
poor. suitable conditions.
The audio settings (bass, treble, ambiance) are unsuitable. Set the treble or bass level to 0, without selecting
an ambiance.
In "Random all" play, not In "Random all" play, the system can only take into account up to
all of the tracks are played. 999 tracks.
With the engine off, the When the engine is switched off, the audio system operating time Start the vehicle's engine to increase the battery
audio system switches off depends on the battery charge. charge.
after a few minutes of use. The switch-off is normal: the audio system switches to economy
mode and switches off to prevent discharging the vehicle's battery.
The message "the audio In order to protect the installation if the surrounding temperature Switch the audio system off for a few minutes to
system is overheated" is too high, the audio system switches to an automatic thermal allow the system to cool.
appears on the display. protection mode leading to a reduction of the volume or stopping of
the playing of the CD.
358