Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Joint
Reinforcement
Reinforcement = Unreinforced
Bar size (Dia) = 0 mm Ast.min = 0.002*Ad = 100 mm²/m
Reinf't cts (cts) = 800 mm Area steel (Ast) = 0 mm²/m
Reinf't strength (fsy) = 500 MPa - Table 3.7
Depth to steel in +ve bending from unit face (ds) = 70 mm Reinf't central (ds) = 70 mm
Depth to steel in +ve bending (dt = d - rep) = 70 mm Reinf't cover in block = 45.0 mm
Depth to steel in -ve bending (dc) = 70 mm
Ties
Cl 1.5.2.35
Veneer Tie A tie connecting masonry veneer to frame for resisting lateral forces
Cavity Tie A tie connecting two leaves of masonry separated a cavity of any width
Type A Designed primarily for wind loads
Type B Designed primarily for seismic ductility (Typically NZ)
Notes:
Rakes:
tb=tu if raked to a depth not more than 3mm - Cl 4.5.1(a)
Default reinf't settings:
Bar size = 16 mm
Reinf't cts = 800 mm
Reinf't strength = 500 MPa