Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Jonathan Detty
Mechanical Engineer
Confidential Document of Florida Polytechnic University – Internal Use Only – Do Not Distribute
Major Project List
Jonathan Detty
Approach: Result:
Two microphones and a Successful. Testing setup
signal amplifier were performed as expected.
configured in combination Unique waveforms were
with an oscilloscope to recorded for a multitude of
record longitudinal acoustic materials. kNN statistical
velocities and sound wave analysis was performed
patterns. and found significant
correlation between
longitudinal acoustic
velocity and modulus of
elasticity. 3
Additional Project Images
4
Skim Shield LLC / Florida Polytechnic University
Internship
Approach: Result:
Develop aedes aegypti Successful. Adult aedes
mosquitos from egg to adult. aegypti mosquito’s were
Design and build hatching, hatched. Hatching, testing,
testing, and anesthetizing and anesthetizing chambers
environments. Carry out performed flawlessly. Flight
acoustic testing while and antennal analysis were
examining/recording flight completed. Budget was
pattern. Safely harvest maintained. Company was
specimens and transfer for satisfied with final report.
antennal analysis.
5
Additional Project Images
6
Saddle Creek Senior Capstone Project
Approach: Result:
Fuel efficiency improvement Successful. Data was
was categorized into driver analyzed and outliers were
simulation, TPMS, and eliminated. Three pronged
alignment correction. At solution approach exceeded
least three ideas were company’s expectations.
presented to the company ROI analysis validated
for each category of solution reasoning.
improvement. Once picked,
ROI analysis was performed
on each category’s solution.
7
Additional Project Images
8
Mechatronics Final Project
Approach: Result:
Online references were used to Successful. Vehicle showed the ability
establish an idea of how the to avoid obstacles, adjusting path
accordingly.
vehicle could be wired and
coded. SolidWorks models of
vehicle components were created
and then imported into Ansys for
FEA analysis. Servo motor was
implemented into the design to
rotate the ultrasonic sensor and
increase FOV. Vehicle was
assembled and coded.
9
Additional Project Images
https://www.electronicshub.org/obstacle-avoiding-robot-arduino/ 10
Design Project
Approach: Result:
An initial inverted pendulum Successful. Project came in
design was developed and under budget. Inverted
used to create a BOM. Lab pendulum balanced
manual and procedure were successfully with imposed
created for future disturbances. Lab manual
experiment. Parts were thoroughly described
assembled and PID controller experiment procedure and
was coded while Kp, Ki, and focused on key PID concepts
Kd values were adjusted. in results section.
11
Inverted Pendulum
Student Interaction Overview
User
D3 User
• Students will adjust Kp, Ki, and Kd values • Students will generate multiple graphs
according to lab procedure. comparing the systems output vs. time.
• Students will ultimately identify ideal gains • Graphs will include system response to
for proportional, integral, and derivative introduced disturbances.
responses.
12
FEA/Instrument Experience
13
FEA/Instrument Experience
14
FEA/Instrument Experience
15
FEA/Instrument Experience
16
FEA/Instrument Experience
SEM
17
FEA/Instrument Experience
18