Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
20 / 24 mm OEM-Line-System
14 mm OEM-Line-System
3x11 OEM-Line-System
01_2017 2
Product overview
04 - 05 20 / 24 mm OEM-Line System
14 - 17 14 mm OEM-Line System
26 - 27 3x11 optics
30 - 31 About BJB
• Modular-System
• Extremely slim optics for use directly above the board
• Easy installation by clip-in fixing from above
• Unchanged lighting design - Easy upgrade to LED technology
• High freedom in luminaire design
• No profile for guidance required
• Simple mounting of the holder and optics by hand, without additional tools or requirements
• Universally applicable - no defined hole distance
• Compensation of thermal changes in length
Structure
• Also for automatic wiring
• Wiring also after the optical assembly 31.930.-44x
35.301.10x
31.930.-342/-345
Optics holder 31.930.-342 for 20 mm boards
3
Optics holder 31.930.-345 for 24 mm boards
• Extremely slim
• For application directly above the LED
• No additional profile for guidance required
• Beam angle: 40°, 50°, 60°,90°, single and double
asymmetrical
• Standard lengths: 560 and 1.200 mm
• Optics provides room for thermal expansion
of the LED module
• For use as primary optics in linear and area lighting
applications
• Uniform light distribution
31.930.-444.85 clear 7.9 mm 10.3 mm 560 mm Snap on 3030, 5630 PMMA wave structure typical 93% 53° 26 53°
31.930.-441.85 clear 7.9 mm 10.3 mm 1.120 mm Snap on 3030, 5630 PMMA Wellenstruktur typical 93% 53° 26 53°
31.930.-444.89 frosted 7.9 mm 10.3 mm 560 mm Snap on 3030, 5630 PMMA wave structure typical 92% 60° 27 60°
31.930.-441.89 frosted 7.9 mm 10.3 mm 1.120 mm Snap on 3030, 5630 PMMA wave structure typical 92% 60° 27 60°
35.301.1011.85 clear 7.9 mm 10.3 mm 560 mm Snap on 3030, 5630 PMMA wave structure 90°
35.301.1012.85 clear 7.9 mm 10.3 mm 1.120 mm Snap on 3030, 5630 PMMA wave structure 90°
uionng
rreait
pea
35.301.1013.85 clear 7.9 mm 10.3 mm 560 mm Snap on 3030, 5630 PMMA wave structure ±20°
reb
por
35.301.1014.85 clear 7.9 mm 10.3 mm 1.120 mm Snap on 3030, 5630 PMMA wave structure ±20°
nV
35.301.1015.85 clear 7.9 mm 10.3 mm 560 mm Snap on 3030, 5630 PMMA wave structure
ini +20°
35.301.1016.85 clear 7.9 mm 10.3 mm 1.120 mm Snap on 3030, 5630 PMMA wave structure +20°
Tolerances of optical and electrical data: ± 10%
* Warranty conditions of BJB GmbH & Co KG as stated on page 100 of the LED
Applications catalogue (Issue No.1 - 2014) and as available via the Internet under www.bjb.com/warranty-conditions.html are valid.
30.000 30.000
LED - Light and connection technology LED - Light and connection technology
pkg. wt.
1 27 g
Customised LED module Customised LED module
part- Module Colour Luminous flux Module efficiency Energy Module Number of Distance Operational Max.operational Operational Power Series Power consumption
no. dimension temperature at Tc 50 at Tc 50 efficiency class output LEDs of LEDs current If (mA) current If (mA) voltage Uf (V) consumption (W) connection kWH/1.000 h
30.000.0366.00 560 x 20 mm 3.000 K 2.300 lm 135 lm/W A+ 4.100 lm/m 20 ~ 28 mm 700 mA 750 mA 24.3 V 17 W max. 4 modules 18.7
30.000.0367.00 560 x 20 mm 3.500 K 2.300 lm 135 lm/W A+ 4.100 lm/m 20 ~ 28 mm 700 mA 750 mA 24.3 V 17 W max. 4 modules 18.7
30.000.0368.00 560 x 20 mm 4.000 K 2.300 lm 135 lm/W A+ 4.100 lm/m 20 ~ 28 mm 700 mA 750 mA 24.3 V 17 W max. 4 modules 18.7
30.000.0369.00 560 x 20 mm 5.700 K 2.450 lm 144 lm/W A++ 4.400 lm/m 20 ~ 28 mm 700 mA 750 mA 24.3 V 17 W max. 4 modules 18.7
30.000.0374.00 560 x 20 mm 3.000 K 4.600 lm 135 lm/W A+ 8.200 lm/m 40 ~ 14 mm 1.400 mA 1.500 mA 24.3 V 34 W max. 4 modules 37.4
30.000.0375.00 560 x 20 mm 3.500 K 4.600 lm 135 lm/W A+ 8.200 lm/m 40 ~ 14 mm 1.400 mA 1.500 mA 24.3 V 34 W max. 4 modules 37.4
30.000.0376.00 560 x 20 mm 4.000 K 4.600 lm 135 lm/W A+ 8.200 lm/m 40 ~ 14 mm 1.400 mA 1.500 mA 24.3 V 34 W max. 4 modules 37.4
30.000.0377.00 560 x 20 mm 5.700 K 4.900 lm 144 lm/W A++ 8.800 lm/m 40 ~ 14 mm 1.400 mA 1.500 mA 24.3 V 34 W max. 4 modules 37.4
30.000.0421.00 280 x 20 mm 3.000 K 1.150 lm 135 lm/W A+ 4.100 lm/m 10 ~ 28 mm 700 mA 750 mA 12.2 V 8.5 W max. 8 modules 9.4
30.000.0422.00 280 x 20 mm 3.500 K 1.150 lm 135 lm/W A+ 4.100 lm/m 10 ~ 28 mm 700 mA 750 mA 12.2 V 8.5 W max. 8 modules 9.4
30.000.0423.00 280 x 20 mm 4.000 K 1.150 lm 135 lm/W A+ 4.100 lm/m 10 ~ 28 mm 700 mA 750 mA 12.2 V 8.5 W max. 8 modules 9.4
30.000.0424.00 280 x 20 mm 5.700 K 1.225 lm 144 lm/W A++ 4.400 lm/m 10 ~ 28 mm 700 mA 750 mA 12.2 V 8.5 W max. 8 modules 9.4
30.000.0429.00 280 x 20 mm 3.000 K 2.300 lm 135 lm/W A+ 8.200 lm/m 20 ~ 14 mm 1.400 mA 1.500 mA 12.2 V 17 W max. 8 modules 18.7
30.000.0430.00 280 x 20 mm 3.500 K 2.300 lm 135 lm/W A+ 8.200 lm/m 20 ~ 14 mm 1.400 mA 1.500 mA 12.2 V 17 W max. 8 modules 18.7
30.000.0431.00 280 x 20 mm 4.000 K 2.300 lm 135 lm/W A+ 8.200 lm/m 20 ~ 14 mm 1.400 mA 1.500 mA 12.2 V 17 W max. 8 modules 18.7
30.000.0432.00 280 x 20 mm 5.700 K 2.450 lm 144 lm/W A++ 8.800 lm/m 20 ~ 14 mm 1.400 mA 1.500 mA 12.2 V 17 W max. 8 modules 18.7
Holder for 20 mm BJB linear module and optics Holder for 20 mm BJB linear module and optics
Optic holder for 20 mm LED modules Optic holder for 24 mm LED modules
Material: PC Material: PC
Easy and quick assembly with standardised P2F Easy and quick assembly with standardised screws M3
(Push to Fix) 28.901
• Easy, fast and secure optics mounting by clip in fixing
• Easy, fast and secure optics mounting by clip in fixing from above
from above • Universal application - no defined hole spacing
• Universal application - no defined hole spacing • Integration of the optics without disturbing the light
• Integration of the optics without disturbing the light image image
• Assembling of optic holder and optics in one step • Assembling of optic holder and optics in one step
Recommended number of optic holders: 7 pcs. at 560 mm Recommended number of optic holders: 7 pcs. at 560 mm
length of the LED modules length of the LED modules
Optimised for use of 1.200 mm LED modules Optimised for use of 1.200 mm LED modules
Material:
Optic holder: PC
P2F (Push to Fix): CrNi with silicone ring
Application:
31.930 28.901
LED - Light and connection technology LED - Light and connection technology
Holder for 24 mm BJB linear module and optics P2F (Push to Fix) Fixing element
• Easy, fast and secure optics mounting by clip in fixing Push-to-Fix (P2F) -Fixing element
from above Push-in fixing for mounting PCBs and
• Universal application - no defined hole spacing BJB- Optic holder into a luminaire housing
• Integration of the optics without disturbing the light Material: CrNi with silicon insulating ring
image Constant and reliable constant pressure by means of
• Assembling of optic holder and optics in one step elastical silicone
Contact pressure: min. 10 N
Recommended number of optic holders: 7 pcs. at 560 mm Push-in fixing: for hole pattern in light fitting
ø 4.2 +/- 0.1 mm and ø 4.7 +/- 0.1 mm in PCBs
length of the LED modules
• Quick assembly process improves production efficiency
Optimised for use of 1.200 mm LED modules
and reduces production costs
• Eliminates potential damage from screw fixing due to
low insertion force
• CrNi and silicone materials ensure long life reliability
• Reliable heat dissipation due to a constant pressure
• Suitable for Zhaga certified LED modules. BJB
recommends to use modules with 4.7 mm fixing hole
diameter
• Assembly without any additional tools possible
• Solutions for Automation upon request
Application: • Removable from front
98...
LED - Light and connection technology
• Modular system
• Extremely slim diffusor for use directly above the board
• Easy installation by clip-in fixing from above
• Unchanged lighting design - Easy upgrade to LED technology
• High freedom in luminaire design - No profile for guidance required
• Assembly of the holder and the LED module in just one step 31.930.-431
• Universally applicable - no defined hole distance
• Compensation of thermal changes in length
• Also for automatic wiring
• Wiring also after the optical assembly
Overview
Diffusor 31.930.-431x
1
The diffusor is made of PMMA with a transmissi-
on factor of approx approx. 94 %. This is a spe-
cially engineered diffusor material designed for
LED light, offering smooth, uniform light distri-
bution, excellent performance in angle control,
efficiency, and light source hiding. The end is
result is an optimized balance of performance
Optical holder
and aesthetic, making the system a perfect repla-
cement for T5 flourescent light sources.
P2F 28.901.UXX Length: 565 mm
(Push to Fix)
Customised LED module Diameter: 24 mm
14 mm Diffuse cover and holder Holder for optics and LED modules and P2F fixing element
31.930.-435.89 diffuse 14.9 mm 24.3 mm 1.500 mm Snap-in 3030, 5630 PMMA smooth ~ 92%
31.930.-439.89 diffuse 14.9 mm 24.3 mm 2.000 mm Snap-in 3030, 5630 PMMA smooth ~ 92%
98...
pkg. wt.
1 27 g
Customised LED module Customised LED module
part no. Module Colour Luminous flux Module efficiency Energy Module Number Distance Operational Max.operational Operational Power Series Power consumption
dimensions temperature at Tc 50 at Tc 50 efficiency class output of LEDs LED current If (mA) current If (mA) voltage Uf (V) consumption (W) connection kWH/1.000 h
30.000.0186.00
560 x 14 mm 3.000 K 1.160 lm 147 lm/W A++ 4.100 lm/m 24 ~ 23 mm 700 mA 1.800 mA 11.3 V 7.9 W max. 4 modules 8.7
High Efficiency
30.000.0186.00
560 x 14 mm 3.000 K 2.160 lm 129 lm/W A++ 8.200 lm/m 24 ~ 23 mm 1.400 mA 1.800 mA 11.9 V 16.7 W max. 4 modules 18.4
High Output
30.000.0221.00
560 x 14 mm 4.000 K 1.250 lm 158 lm/W A++ 4.100 lm/m 24 ~ 23 mm 700 mA 1.800 mA 11.3 V 7.9 W max. 4 modules 8.7
High Efficiency
30.000.0221.00
560 x 14 mm 4.000 K 2.350 lm 140 lm/W A++ 8.200 lm/m 24 ~ 23 mm 1.400 mA 1.800 mA 11.9 V 16.7 W max. 4 modules 18.4
High Output
30.000.0223.00
560 x 14 mm 5.700 K 1.310 lm 166 lm/W A++ 4.100 lm/m 24 ~ 23 mm 700 mA 1.800 mA 11.3 V 7.9 W max. 4 modules 8.7
High Efficiency
30.000.0223.00
560 x 14 mm 5.700 K 2.440 lm 146 lm/W A++ 8.200 lm/m 24 ~ 23 mm 1.400 mA 1.800 mA 11.9 V 16.7 W max. 4 modules 18.4
High Output
30.000.0418.00
280 x 14 mm 3.000 K 580 lm 145 lm/W A++ 2.100 lm/m 12 ~ 23 mm 350 mA 900 mA 11.3 V 4.0 W max. 4 modules 4.4
High Efficiency
30.000.0418.00
280 x 14 mm 3.000 K 1.080 lm 129 lm/W A++ 3.900 lm/m 12 ~ 23 mm 700 mA 900 mA 11.9 V 8.4 W max. 4 modules 9.2
High Output
30.000.0419.00
280 x 14 mm 4.000 K 625 lm 156 lm/W A++ 2.200 lm/m 12 ~ 23 mm 350 mA 900 mA 11.3 V 4.0 W max. 4 modules 4.4
High Efficiency
30.000.0419.00
280 x 14 mm 4.000 K 1.175 lm 140 lm/W A++ 4.200 lm/m 12 ~ 23 mm 700 mA 900 mA 11.9 V 8.4 W max. 4 modules 9.2
High Output
30.000.0420.00
280 x 14 mm 5.700 K 655 lm 164 lm/W A++ 2.400 lm/m 12 ~ 23 mm 350 mA 900 mA 11.3 V 4.0 W max. 4 modules 4.4
High Efficiency
30.000.0420.00
280 x 14 mm 5.700 K 1.220 lm 146 lm/W A++ 4.400 lm/m 12 ~ 23 mm 700 mA 900 mA 11.9 V 8.4 W max. 4 modules 9.2
High Output
Tolerances of optical and electrical data: ± 10%
* Warranty conditions of BJB GmbH & Co KG as stated on page 100 of the LED Applications catalogue (Issue No.1 - 2014) and as available via the Internet under www.bjb.com/warranty-conditions.html are valid.
Optics and optical systems
3x11 OEM-Line-System
OEM-Line-System for 3x11 linear LED modules
• Optics for 3x11 LED modules based on Zhaga book 7 with uniform light distribution and reduced glare
• Fitting for 280mm (1ft) & 560mm (2ft) long LED modules
• Key and slot system for a clean assembly of the optics
• Highly compatible to available 3x11 LED modules
• 3D PMMA injection molding optics
• Available in 5 different light distributions
31.930.-45x
Overview
Length: 280 mm
Width: 61 mm
31.930.-454.85 31.930.-451.85
Optic for 3 x 11 LED Module according to Zhaga Book 7 Optic for 3 x 11 LED Module according to Zhaga Book 7
Optimised for use with 5630 LED Optimised for use with 5630 LED
31.930.-454.85 Clear 3D PMMA injection-optic Clear 3D PMMA injection-optic
31.930.-453.85 31.930.-452.85
31.930.-453.85
Optic for 3 x 11 LED Module according to Zhaga Book 7 Optic for 3 x 11 LED Module according to Zhaga Book 7
Optimised for use with 5630 LED Optimised for use with 5630 LED
Clear 3D PMMA injection-optic Clear 3D PMMA injection-optic
• Improved visibility and contrast of the illuminated areas • Improved visibility and contrast of the illuminated areas
• Uniform light distribution • Uniform low-glare light distribution
Example of application:
BJB linear LED modules for 3x11 optics BJB linear LED modules for 3x11 optics
pkg. wt.
1 27 g
BJB linear LED modules BJB linear LED modules
part Module Colour Luminux flux Module efficiency Energy Module Number Distance Operational Max.operational Operational Power Series Power consumption
no. dimensions temperature at Tc 50 at Tc 50 efficiency class output of LEDs of LEDs current If (mA) current If (mA) voltage Uf (V) consumption (W) connection kWH/1.000 h
30.000.0388.00 279.5 x 55 mm 3.000 K 1.700 lm 140 lm/W A++ 4.100 lm/m 33 ~ 25 mm 350 mA 450 mA 34.7 V 12.1 W max. 7 modules 13.31
30.000.0389.00 279.5 x 55 mm 4.000 K 1.850 lm 153 lm/W A++ 4.100 lm/m 33 ~ 25 mm 350 mA 450 mA 34.7 V 12.1 W max. 7 modules 13.31
30.000.0455.00 279.5 x 55 mm 3.000 K 1.700 lm 140 lm/W A++ 4.100 lm/m 33 ~ 25 mm 350 mA 450 mA 34.7 V 12.1 W max. 7 modules 13.31
30.000.0456.00 279.5 x 55 mm 4.000 K 1.850 lm 153 lm/W A++ 4.100 lm/m 33 ~ 25 mm 350 mA 450 mA 34.7 V 12.1 W max. 7 modules 13.31