Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
4 4. Which was not among the weaknesses of the 1987 and 1994 versions of ISO 900
(a) Including broad dimensions of customer satisfaction within the quality definition. (b) In
Ans. (a)
5 5. Which of the following was not given as a key feature of Total Quality Ma
(a) Using quality tools and techniques (b) Continuous improvement (c) Teamwork,
Ans. (d)
6 6. What do the initials of the PDCA cycle stand for?
(a) Plan, do, check, act (b) Plan, diagnose, conclude, act (c) Plan, desig
Ans. (a)
7 7. Name the practice of examining the best practices in an industry or in the world a
(a) Calibration (b) Brainstorming (c) Pareto analysis (d) Benchmarking
Ans. (d)
8 8. A control chart to record process performance usually identifies control limits and
(a) Control charts require complex statistical analysis to set them up. (b) Control charts d
Ans. (b)
Ans. (a)
12 12. Levelled scheduling (heijunka) is the Japanese-derived term for levelling the prod
(a) Mix and volume level are even over time. (b) Mix and quality level are even over time.
Ans. (a)
13 13. Which of the following statements about Just-in-Time is correct?
(a) JIT is only useful in a high product variety environment. (b) JIT will overcome poor com
Ans. (c)
14 14. Just-in-Time production implies:
(a) That increased complexity means that processes must be controlled using computer-ba
Ans. (d)
15 15. Which one of the following would NOT be considered a prerequisite for successfu
(a) Low variety of product range (b) Sophisticated production and materials planning com
Ans. (b)
16 16. The lean approach to people management has also been called the:
(a) Multi-skills system (b) Employee-comes-first system (c) People empowerment syste
Ans. (d)
17 17. Which of the following issues does NOT define the lean philosophy?
(a) Aston light (b) Alton light (c) Andon light (d) Arden light
Ans. (c)
24 6. Leanphilosophy follows:
i) Pull ii) Push
iii) Push-Pull iv) None of the above
(A) True
(B) False
(Ans: A)
(A) True
(B) False
(Ans: A)
(A) True
(B) False
(Ans: A)
(A) Light
(B) Sound
(C) Frequency
(D) None of the above
(Ans: B)
52 39-The following is (are) are generally provided with limit switch to prevent mot
(A) Hoists
(B) Conveyors
(C) Machine tables
(D) All of the above
(Ans: D)
55 48. Work sampling is applied for
(A) Estimation of the percentage utilization of machine tools
(B) Estimating the percentage of the time consumed by various job activities
(C) Finding out time standards, specially where the job is not repetitive and where time study by stop watch met
(D) All of the above
Correct Answer - d
56 51. For a product layout the material handling equipment must
(A) Have full flexibility
(B) Employ conveyor belts, trucks, tractors etc.
(C) Be a general purpose type
(D) Be designed as special purpose for a particular application
Correct Answer D
57 54. Work study involves
(A) Only method study
(B) Only work measurement
(C) Method study and work measurement
(D) Only motion study
Correct Answer C
58 55. An activity of the project is graphically represented by ________ on the network diagram.
(A) A circle
(B) A straight line
(C) An arrow
(D) None of these
Correct Answer C
59 56. Break-even analysis consists of
(A) Fixed cost
(B) Variable cost
(C) Fixed and variable costs
(D) Operation costs
Correct Answer C
60 60. Material handling in automobile industry is done by
(A) Overhead crane
(B) Trolley
(C) Belt conveyor
(D) All of the above
Correct Answer A
61 62. String diagram is used when
(A) Team of workers is working at a place
(B) Material handling is to be done
(C) Idle time is to be reduced
(D) All of the above
Correct Answer A
62 63. Father of industrial engineering is
(A) Jack Gilbert
(B) Gantt
(C) Taylor
(D) Newton
Correct Answer c
63 66. In product layout
(A) Specialized and strict supervision is required
(B) Machines can not be used to their maximum capacity
(C) Manufacturing cost rises with a fall in the volume of production
(D) All of the above
Correct Answer D
64 69. Material handling and plant location is analysed by
(A) Gantt chart
(B) Bin chart
(C) Emerson chart
(D) Travel chart
Correct Answer D
65 70. The population of a town increases every year by 4%. If its present population is 50,000, then after 2 ye
A.
53,900
B.
54,000
C.
54,080
D.
54,900
Answer: Option C
66 71-Which of the following is for Environment management?
a. ISO-9000
b. ISO-14000
c. ISO-26000
d. ISO-31000
(Ans:b)
67 72-Match The Following
A. TQM promotes 1. Small change
B. Kaizen is 2. Continuous improvement
C. Quality circle can solve problem related to 3. Employee participation
D. Quality circle benefit to 4. Employee
The correct order is
a. A-3, B-1, C-2, D-4
b. A-1, B-3, C-2, D-4
c. A-3, B-1, C-4, D-2
d. A-3, B-2, C-1, D-4
68 73-The following is (are) the machine down time.
a. Waste
b. No material
c. Breakdown
d. All of the above
(Ans:d)
69 74-Control chart is a
a. Process monitoring tool
b. Process control tool
c. Both (a) and (b)
d. None of the above
(Ans:c)
70 75-The objective of ISO-9000 family of Quality management is
a. Customer satisfaction
b. Employee satisfaction
c. Skill enhancement
d. Environmental issues
(Ans:a)
71 78. A low unit cost can be obtained by following
(A) Product layout
(B) Functional layout
(C) Automatic material handling equipment
(D) Specialization of operation
Correct Answer A
74 85 A can do a work in 15 days and B in 20 days. If they work on it together for 4 days, then the
A. 1
4
B. 1
10
C. 7
15
D. 8
15
Correct Answer
Answer: Option D
75 86 A hollow iron pipe is 21 cm long and its external diameter is 8 cm. If the thickness of the pipe
A. 3.6 kg
B. 3.696 kg
C. 36 kg
D. 36.9 kg
Answer: Option B
76 87 A metallic sheet is of rectangular shape with dimensions 48 m x 36 m. From each of its corne
A. 4830
B. 5120
C. 6420
D. 8960
Answer: Option B
Step 2 Create good first impression by being disciplined, regualr and well behaving.
Step 3 Show readiness to learn and proactively take interest to do the work.
. Processes
. Machine Operations
. Role and Responsibilities
. Overall understanding of business
. What appeals to your more
ely. (C) Fitness for purpose is the key. (d) All of these (e) none of these.
estment in prevention . (C) Zero defects is not possible. (d) There is an inevitable worsening of quality during periods of change.
the quality definition. (b) Insufficient guidance on improvement. (c) Universality meant average. (d) Weak links between product and pr
onclude, act (c) Plan, design, control, act (d) Purpose, develop, carry out, assess
ndustry or in the world and using this knowledge as a basis for improvement.
enchmarking
entifies control limits and specification limits. Which one of the following is true?
em up. (b) Control charts do not prevent poor quality output. (c) Control limits should equal specification limits to prevent any output outs
sion (c) Single Manufacturing Engineering Division (d) Small Miniaturized Equipment Die.
ord Production System , Toyota Precise System (c) Ford Precision System , Toyota Precision System (d) Ford Production System , Toyota Pr
) JIT will overcome poor component manufacture. (c) JIT seeks to reduce inventory in an effort to reduce waste. (d) JIT pushes inventory t
controlled using computer-based production systems. (b) A wide range of suppliers will be needed to meet increased demand. (c) Large ba
and materials planning computer systems (c) Reliable deliveries of defect-free materials (d) Preventive maintenance of equipment
called the:
) People empowerment system (d) Respect-for-humans system
hilosophy?
d of quality problem, he/she could activate a signal that could illuminate a light above the work station wh
Techniques:
iv) 2016
ii) Six-Sigma
ii) Standardize
ake Proofing
ze, Improve & Control
down maintenance cost
witch to prevent motion beyond preset limit
me study by stop watch method is not possible
ork diagram.
on is 50,000, then after 2 years it will be
ether for 4 days, then the fraction of the work that is left is :
f the thickness of the pipe is 1 cm and iron weighs 8 g/cm3, then the weight of the pipe is:
m. From each of its corners, a square is cut off so as to make an open box. If the length of the square is 8 m, the volume o
periods of change.
its to prevent any output outside specification. (d) Control limits are set outside the specification limits.
creased demand. (c) Large batches of similar products will need to be manufactured to increase efficiency. (d) That products will be pulled
ntenance of equipment
ve the work station which stops the line. This is called an:
uare is 8 m, the volume of the box (in m 3) is:
That products will be pulled through the operations system to meet customer demand.