Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1.0 GENERAL
1.1 SUMMARY
1. Work of this section shall conform to the requirements of the Contract Documents.
3. Related Sections: Sealant for the following work shall comply with requirements of
this Sections:
4. Related Documents:
1.2 REFERENCES
1.3 SUBMITTALS
1. General:
2. Before purchase of each required material, confirm its compatibility with each other
material it will be applied to in joint system as well as itself during and after curing.
2. Store and handle materials to prevent heir deterioration or damage due to moisture,
temperature changes, contaminants or other causes.
1. Joint dimension conditions do not proceed with proceed with installation of sealers
when joint dimensions are less than or greater than recommended by joint sealer
manufacturer for application for application indicated.
1.7 WARRANTY
1. Repair or replace joint sealers which fail to perform as intended because of leaking,
crumbing, hardening, shrinkage, bleeding, sagging, staining or loss of adhesion.
END OF SECTION