Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.colchester.co.uk
Typhoon Twin Spindle
CNC Turning Centres
The Typhoon twin-spindle series constructed from a one piece cast base, incorporates FEM
analysis to achieve an optimal structure to further enhance machine rigidity and stability.
www.colchester.co.uk
ighly accurate cutting is achieved through the one piece cast base that
H
incorporates FEM analysis. This helps to achieve an optimal structure to
further enhance machine rigidity and stability.
he 30º slant bed design has a low centre of gravity for easier
T
swarf management and better ergonomics.
Sub-chuck Size: 6” / 8”
Sub-spindle
Highly rigid one-piece sub-spindle base configuration
gives users increased strength and performance.
When used in conjunction with the power turret,
it completes multiple operations in one hit,
significantly decreasing cutting cycle times.
Function Variations /
Improved Maintainance
Function Variations
2-Axis Turning
MW S
ub-Spindle + Milling Function
MYW S
ub-Spindle + Milling + Y-Axis Function
Travel Diagram
Typhoon B45MS Typhoon B52MS / B65MS
Dimensional Diagram
Machine Specifications
TYPHOON TWIN SPINDLE
B45MS B52MS B65MS B45MSY B52MSY B65MSY
CONTROLLER FANUC 0i-TF
CAPACITY
Swing over bed mm Ø850
Swing over saddle mm Ø700
Max. Turning diameter mm Ø360 Ø300
Max. Turning length mm 610 600 545 610 600 545
Distance between centres mm 610 600 545 610 600 545
Bar Capacity mm Ø45/Ø45 Ø52/Ø45 Ø65/Ø45 Ø45/Ø45 Ø52/Ø45 Ø65/Ø45
Chuck size Inch 6"/6" 8"/8" 10"/8" 6"/6" 8"/8" 10"/8"
STROKE
X-axis stroke mm 180+30 155+25
Y-axis stroke mm - ±50
Z-axis stroke mm 715 665 715 665
B-Axis stroke mm 610 600 545 610 600 545
FEEDRATE
Axial rapid feedrate m/min X:20, Z:25, B:10 X:20, Y:10, Z:25, B:10
Cutting feedrate m/min 10000
SPINDLE
Spindle speed rpm 5500 4200 3500 5500 4200 3500
Spindle nose - A2-5 A2-6 A2-5 A2-6
Spindle taper - 1/20
Spindle nose diameter mm Ø55 Ø66 Ø79 Ø55 Ø66 Ø79
TURRET
Turret style and storage capacity - BMT-65
Square tool dimension mm 25 x 25
Boring tool dimension mm Ø40
Turret indexing time (T to T) sec 0.34/0.73
M-axis tool speed rpm 4000
M-axis tool motor output (cont./15 min) kW 3.7/5.5
MOTOR
Spindle motor output (cont/30 min) kW 11/15
Sub-Spindle motor output (cont./30 min) kW 7.5/11
Axial servo motor output kW 3/3/3 3/3/3
X/Z AXIS ACCURACY
Positioning accuracy (VDI 3441) mm 0.01
Repeatability accuracy (VDI 3441) mm 0.006
HYDRAULIC SYSTEM
Hydraulic pump motor output kW 2.2
Hydraulic pressure PSI 700
Hydraulic tank capacity L 40
COOLANT TANK
Coolant motor output kW 0.75
Coolant tank capacity L 120
Lub. Tank capacity L 3
OTHER
Power requirements KVA 45 50
Machine size mm 3286 x 1891 x 2002
Machine weight kg 5800 5900 6000 5900 6000 6100
All specifications, dimensions and design characteristics are subject to change without prior notice.
www.colchester.co.uk
Standard and optional equipment listed above are for reference only. The correct information is dependent on each customer order.
www.colchester.co.uk
Colchester Machine Tool Solutions | Union Street | Heckmondwike | West Yorkshire | WF16 0HL
www.colchester.co.uk