Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
0 Release
Preprocessing
Meshing
and Solution
Geometry
Import / Geometry
Creation Cleanup /
Modifications
Mesh
Quality
Module 5
4 © 2016 ANSYS, Inc. February 14, 2018
Mesh Process & Course Plan
Control the mesh locally
• Depends on the “Mesh Method” used Non-CutCell meshing local controls
Local Mesh Controls are:
• Method - For Body
• Sizing - For Vertex, Edge, Face, and Body
• Contact Sizing - For Edge, and face
• Refinement- For Vertex, Edge, and Face
• Face Meshing - For Mapped or Pave Meshing
• Match Control - For Edge and Face
• Pinch - For Vertex and Edge
• Inflation - For Edge and Face
• Contact Match - For matching mesh
• Node Merge and Move - For nodes The latest control added on a particular entity overrides
any prior controls
Only Sizing and Inflation local controls are
available for CutCell meshing
5 © 2016 ANSYS, Inc. February 14, 2018
Sizing
Recommended for locally defining the mesh sizes
You can only scope sizing to one geometry entity type at a time
• For example: you can apply sizing to a number of edges or a number of faces, but not
a mix of edges and faces
Four Types of Sizing option
• Element Size specifies average element edge length on bodies, faces or edges
• Number of Divisions specifies number of elements on edge(s)
• Body of Influence specifies average element size within a body
• Sphere of Influence specifies average Entity/Option Element Size Number of Divisions Body of Influence Sphere of Influence
Vertices x
element size within the sphere Edges x x x Requires a
Faces x x Coordinate
Sizing options vary depending Bodies x x x
system for
the sphere
on the entity type chosen Advanced Size
Function in
Global settings
Only Element Size type is available for CutCell should be
meshing disabled
Sizing Type:
Number of Divisions
Edge meshed with Edge meshed with 10
constant element size of elements
60mm
Behavior
Soft: Sizing will be influenced by global sizing functions such as those based on proximity
and/or curvature as well as local mesh controls
Hard: Size control is strictly adhered to
• Transition between hard edges (or any edge with bias) and adjacent edge and face
meshes may be abrupt
• Hard edges or edges with bias will override Max Face Size and Max Size properties
Soft Hard
Number of Division = 4 Number of Division = 4
10 © 2016 ANSYS, Inc. February 14, 2018
Sizing: Faces & Body (volume)
On Vertex On Bodies
– Available with or without Advanced Size – Available with or without Advanced Size
Functions Functions
– Sets the average element size around the – Constant element size is applied within the
selected vertex confines of a sphere
– Inputs: – Use coordinate system to define the center of
• Sphere radius and Element size the Sphere
• Center of the sphere is defined by a model
vertex
Without BOIs
S S
S S
Denoted by S
S, C or E
Full Model
Periodic
Model
Notes:
• Mesh generated as separate parts
• Use Contact Match controls to match mesh
• Create Named Selection to inspect matched mesh
• Node merge can be added as second step to make
mesh conformal
24 © 2016 ANSYS, Inc. February 14, 2018
Node Merge & Node Move
• Node Merge: enables to merge mesh nodes within a specified tolerance,
making the mesh conformal across bodies, parts, and assemblies. Node
Merge can be performed on solid, sheet, and line bodies
• Node Move: Dynamically pick and drag nodes around (quality plots updated
real time)
• History of moves is recorded in Worksheet and allows for “Undo”