Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Formerly Conifloor U
Seamless, self smoothing, polyurethane based flooring system
ESTIMATING DATA MASTERTOP 1324 can be kept for 12 months from date
of manufacture if stored in original unopened packaging,
For thickness of 2.5 to 3.0 mm in a dry enclosed place at temperatures between 15 to
System Product kg/m2 Thickness 35°C, without exposing to direct sunlight.
mm
PRECAUTIONS
Primer Mastertop 0.4 - 0.6 0.3 - 0.4
Primer 9 MASTERTOP 1324 contains certain chemicals which
can cause skin irritation if exposed and respiratory
Broadcasting Filler F5 0.8 - 1.0 0.3 - 0.4
reaction if inhaled. Wear gloves, masks and use hand
sand barrier cream while handling the product. Wash
Body coat Mastertop 3.0 - 4.0 1.5 - 2.0 thoroughly after handling.
Body Coat 31 Should skin contact occur, wash immediately with soap
and water or an effective hand cleaner.
Abrasion Mastertop 0.1 - In case of accidental eye contact, wash with copious
resistant Top Coat 42 quantity of water and immediately seek medical advice.
sealer matt ‡ P If ingested, do not induce vomiting. Consult a doctor
Mastertop - immediately.
Abrasion 0.1
Top Coat 61 Vapours of solvents used for cleaning can be irritating. It
resistant
is therefore recommended that cleaning be done in
sealer matt /
wellventilated areas.
glossy ‡
For detailed Health, Safety and Environmental
‡ Please refer to Sealer Recommendations, please consult and follow all
instructions on the product Material Safety Data Sheet.
Fire: Keep away from sources of ignition. Do not smoke
whilst handling the product.
Flash point: 110°C.
MT 1324/02/0301
The technical information and application advice given in this BASF Construction Chemicals
publication are based on the present state of our best scientific and practical knowledge. As the
STATEMENT OF information herein is of a general nature, no assumption can be made as to a product's suitability for a
RESPONSIBILITY particular use or application and no warranty as to its accuracy, reliability or completeness either
expressed or implied is given other than those required by law. The user is responsible for checking the
suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by
BASF Construction Chemicals either orally or in writing may be followed, modified or rejected by the
NOTE owner, engineer or contractor since they, and not BASF Construction Chemicals, are responsible for
carrying out procedures appropriate to a specific application.