Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The changes between the previous document and this document are:
Cause code 57 added in RANAP chapter 3.2.1.5
Software units MHICU and MHOCOIPU are no longer controlling the mapping of BSSMAP
Cause values to AXE internal cause values, removed from 3.2.1.2
Reserved and spare values are removed from the tables, a note is added for the gaps in the
mapping tables defining the default value.
The tables are split according to the cause value classes
DSS1 mappings were corrected
Added new chapter/table 4.2.1.6 with DSS1 -> AXE. and new chapter/table 4.3.1.6 with
AXE -> DSS1 .
2 Function
This Application Information provides the standard mapping between:
External cause values and AXE internal cause values
External location and AXE internal location
in the source system AXE 106 30/3.
Most of the mappings are controlled by the parameter lists or AXE parameters of the applicable
blocks and can be different for each market.
3 Cause Values
The cause values are used to indicate the reason for generating certain protocol messages.
External cause values are used in different protocols (AAL2, DTAP, DSS1, BICC, BSSMAP,
MAP, RANAP, ISUP, INAP and CAP).
Since values in different protocols may overlap, a unique AXE internal cause value is assigned to
those used by protocols.
The Cause Code is expressed as a-b where:
Location of cause originator, Numeral 0 - 15
Cause value Numeral, 0 - 255
3.1 Cause Value Classes
For DTAP, DSS1, BICC, BSSMAP, ISUP, RANAP and Q.AAL2 the external cause value
consists of two fields: a class and a value within the cause class. The class indicates the general
nature of the event.
The following classes exist:
Table 1 Cause Value Classes for DTAP, DSS1, BICC, BSSMAP, and ISUP
Interworking 112..127
AXE internal cause values are not arranged in cause value classes.
3.2 Mapping External Cause Values to AXE Internal Cause
Values
3.2.1 Call Control Cause Values
3.2.1.1 DTAP and/or RANAP/NAS Cause Values to AXE Internal Cause Values
Since the DTAP and RANAP/NAS cause values are the same, they are listed together. The text
which belongs to AXE cause values marked with "*" does not correspond to the definition of the
respective DTAP and/or RANAP/NAS cause value.
The part of the mapping of DTAP and/or RANAP/NAS to AXE internal cause values is
controlled by AXE parameters of the software units MTBCCU and MTAPHU.
The definition of the AXE internal cause values can be seen in chapter 3.3.1.1.
Table 3 Mapping of DTAP and/or RANAP/NAS Cause Values to AXE Internal Cause Values,
class 'Normal event'
3 No route to destination 58
6 Channel unacceptable 2
17 User busy 4
18 No user responding 5
21 Call rejected 6
22 Number changed 7
31 Normal, unspecified 13
Note: All other values are mapped to the default value 'Normal, unspecified' (13)
Table 4 Mapping of DTAP and/or RANAP/NAS Cause Values to AXE Internal Cause Values,
class 'Resource unavailable'
34 No circuit/channel available 14
41 Temporary failure 16
Note: All other values are mapped to the default value 'Resource unavailable, unspecified' (20)
Table 5 Mapping of DTAP and/or RANAP/NAS Cause Values to AXE Internal Cause Values, class
'Service or option not available'
Note: All other values are mapped to the default value 'Service or option not available, unspecified' (23)
Table 6 Mapping of DTAP and/or RANAP/NAS Cause Values to AXE Internal Cause Values, class
'Service or option not implemented'
Note: All other values are mapped to the default value 'Service or option not implemented, unspecified' (27)
Table 7 Mapping of DTAP and/or RANAP/NAS Cause Values to AXE Internal Cause Values, class 'Invalid
message'
88 Incompatible destination 34
Table 8 Mapping of DTAP and/or RANAP/NAS Cause Values to AXE Internal Caus'e Values, class 'Protocol
error'
te: All other values are mapped to the default value 'Protocol error, unspecified' (45)
ble 9 Mapping of DTAP and/or RANAP/NAS Cause Values to AXE Internal Cause Values, class 'Interworking'
All other values are mapped to the default value 'Interworking, unspecified' (46)
SMAP Cause Values to AXE Internal Cause Values
hich belongs to AXE cause value values marked with "*" does not correspond to the definition of the respective
cause value.
ng of BSSMAP to AXE internal cause values is controlled by AXE parameters of the software units MTBCCU
HU.
ion of the AXE internal cause values can be seen in chapter 3.3.1.1.
Mapping of BSSMAP Cause Values to AXE Internal Cause Values, class 'Normal event'
6 Distance *13
15 Traffic *13
17 Traffic load in target cell higher than in the source cell *13
other values are mapped to the default value 'Normal, unspecified' (13)
Mapping of BSSMAP Cause Values to AXE Internal Cause Values, class 'Resource unavailable'
41 Preemption 83
r values are mapped to the default value 'Resource unavailable, unspecified' (20)
ping of BSSMAP Cause Values to AXE Internal Cause Values, Class 'Service or option not available'
lues are mapped to the default value 'Service or option not available, unspecified' (23)
of BSSMAP Cause Values to AXE Internal Cause Values, class 'Service or option not implemented'
are mapped to the default value 'Service or option not implemented, unspecified' (27)
BSSMAP Cause Values to AXE Internal Cause Values, class 'Invalid message, unspecified'
MAP Cause Values to AXE Internal Cause Values, class 'Protocol error'
113 Low quality down or uplink per overlaid subcell SDCCH *13
3 No route to destination 58
6 Channel unacceptable 2
8 Preemption 83
17 User busy 4
18 No user responding 5
20 Subscriber absent 85
21 Call rejected 6
22 Number changed 7
29 Facility rejected 11
31 Normal unspecified 13
41 Temporary failure 16
45 Reserved *20
85 No call suspended 33
86 Call having the requested call identity has been cleared 107
88 Incompatible destination 34
does not correspond to the definition of the respective MAP error code or reject cause.
is controlled by application parameters of the software unit GRIU.
chapter 3.3.1.2.
Values
1 Unknown subscriber
14 Forwarding violation 95
15 CUG reject
Reject cause:
27 Absent subscriber
enabled *5
disabled 85
34 System failure *16
44 Number changed 7
28 Iu UP failure *13
57 Traffic load in target cell higher than in the source cell *13
specified' (13)
cified' (13)
d' (13)
, class 'Protocol Cause'
13)
the definition of the respective ITU-T/ETSI ISUP 7.7 cause value. In case the ETSI text differs from the ITU-T
sed on the ITU ISUP. The mapping is NOT to internal cause values, it is done to internal End-of-selection codes
308 05/1 Uen)
mal event'
3 No route to destination 58
8 Preemption 83
17 User busy 4
18 No user responding 5
20 Subscriber absent 85
21 Call rejected 6
22 Number changed 7
29 Facility rejected 11
31 Normal, unspecified 13
ntary service"
ource unavailable'
41 Temporary failure 16
' (20)
cified' (23)
cified' (27)
e'
88 Incompatible destination 34
90 Non-existent CUG 54
3 No route to destination 58
8 Preemption 83
17 User busy 4
18 No user responding 5
20 Subscriber absent 85
21 Call rejected 6
22 Number changed 7
29 Facility rejected 11
31 Normal, unspecified 13
34 No circuit/channel available 14
41 Temporary failure 16
able'
88 Incompatible destination 34
.
R.
ws the mapping for ITU-T coding standard and Table 11 shows the mapping for ANSI coding standard. The
3 No route to destination 58
8 Preemption 83
17 User busy 4
18 No user responding 5
22 Number changed 7
28 Address incomplete 10
29 Facility rejected 11
31 Normal, unspecified 13
34 No circuit/channel available 14
41 Temporary failure 16
88 Incompatible destination 34
45 Preemption 83
e adapted to market needs, by using screening masks. This includes ETSI BICC used on international interface.
BICC 1.9 BICC 1.9 (ITU-T) Text AXE
(ITU-T)
3 No route to destination 58
8 Preemption 83
17 User busy 4
18 No user responding 5
20 Subscriber absent 85
21 Call rejected 6
22 Number changed 7
29 Facility rejected 11
31 Normal, unspecified 13
41 Temporary failure 16
88 Incompatible destination 34
90 Non-existent CUG 54
chapter 3.3.1.7.
3 No route to destination 58
8 Preemption 83
17 User busy 4
18 No user responding 5
20 Subscriber absent 85
21 Call rejected 6
22 Number changed 7
29 Facility rejected 11
31 Normal, unspecified 13
34 No circuit/channel available 14
41 Temporary failure 16
88 Incompatible destination 34
90 Non-existent CUG 54
2 Reserved *105
3 No route to destination 58
4 Reserved *59
5 Reserved *60
6 Reserved *2
7 Reserved *106
8 Reserved *83
9 Reserved *84
16 Reserved *3
17 Reserved *4
18 Reserved *5
19 Reserved *61
20 Reserved *85
21 Reserved *6
22 Reserved *7
23 Reserved *128
25 Reserved *121
26 Reserved *91
27 Reserved *8
28 Reserved *9
29 Reserved *11
30 Reserved *12
31 Normal, unspecified 13
34 No circuit/channel available 14
41 Temporary failure 16
43 Reserved *18
44 Requested circuit/channel not available 19
46 Reserved *86
49 Reserved *96
50 Reserved *48
53 Reserved *50
55 Reserved *52
57 Reserved *21
58 Reserved *22
62 Reserved *87
63 Reserved *23
65 Reserved *24
66 Reserved *25
69 Reserved *53
70 Reserved *26
Q.AAL2 Q.AAL2 (ITU-T) Text AXE
(ITU-T)
81 Reserved *28
82 Reserved *29
83 Reserved *30
84 Reserved *32
85 Reserved *33
86 Reserved *107
87 Reserved 62
88 Reserved *34
90 Reserved *54
91 Reserved *88
98 Reserved *38
All values are mapped to the default value 'Interworking, unspecified' (46)
2 Channel unacceptable 6
4 User busy 17
5 No user responding 18
6 Call rejected 21
7 Number changed 22
11 Facility rejected 29
13 Normal, unspecified 31
14 No channel/circuit available 34
16 Temporary failure 41
30 A suspended call exists but this call identity does not exist *95
34 Incompatible destination 88
58 No route to destination 3
83 Preemption *34
107 Call having the requested call identity has been cleared *31
122 Transmission fault control alarm outgoing side immediate release *31
123 Transmission fault control alarm incoming side immediate release *31
2 Channel unacceptable 6
3 Normal clearing 16
4 User busy 17
5 No user responding 18
6 Call rejected 21
7 Number changed 22
10 Address incomplete 28
11 Facility rejected 29
13 Normal, unspecified 31
14 No channel/circuit available 34
16 Temporary failure 41
30 A suspended call exists but this call identity does not exist 83
33 No call suspended 85
34 Incompatible destination 88
47 Reserved nat
49 Reserved nat.
51 Reserved nat.
56 Reserved nat.
57 Reserved nat.
58 No route to destination 3
83 Preemption 8
85 Subscriber absent 20
90 Reserved nat.
107 Call having the requested call identity has been cleared 86
122 Transmission fault control alarm outgoing side immediate release *31
123 Transmission fault control alarm incoming side immediate release *31
3 Normal clearing 16
4 User busy 17
5 No user responding 18
6 Call rejected 21
7 Number changed 22
10 Address incomplete 28
11 Facility rejected 29
13 Normal, unspecified 31
14 No channel/circuit available 34
16 Temporary failure 41
34 Incompatible destination 88
58 No route to destination 3
83 Preemption 8
85 Subscriber absent 20
107 Call having the requested call identity has been cleared *127
122 Transmission fault control alarm outgoing side or immediate release *127
123 Transmission fault control alarm incoming side or immediate release *127
3 Normal clearing 16
4 User busy 17
5 No user responding 18
6 Call rejected 21
7 Number changed 22
10 Address incomplete 28
11 Facility rejected 29
13 Normal, unspecified 31
14 No channel/circuit available 34
16 Temporary failure 41
17 Switching equipment congestion 42
30 A suspended call exists but this call identity does not *127
34 Incompatible destination 88
39 Message not compatible with call stat or non existent or not *127
implemented
58 No route to destination 3
83 Preemption 8
85 Subscriber absent 20
107 Call having the requested call identity has been cleared *127
rd is used.
4 User busy 17
5 No user responding 18
6 Call rejected 21
7 Number changed 22
10 Address incomplete 28
11 Facility rejected 29
13 Normal, unspecified 31
14 No channel/circuit available 34
16 Temporary failure 41
30 A suspended call exists but this call identity does not *95
34 Incompatible destination 88
58 No route to destination 3
83 Preemption 8
107 Call having the requested call identity has been cleared *95
114 Preemption *8
3 Normal clearing 16
4 User busy 17
5 No user responding 18
6 Call rejected 21
7 Number changed 22
10 Address incomplete 28
11 Facility rejected 29
12 Response to STATUS enquiry *127
13 Normal, unspecified 31
14 No channel/circuit available 34
16 Temporary failure 41
30 A suspended call exists but this call identity does not *127
34 Incompatible destination 88
58 No route to destination 3
83 Preemption 8
84 Preemption - Circuit reserved for reuse 9
85 Subscriber absent 20
107 Call having the requested call identity has been cleared *127
122 Transmission fault control alarm outgoing side or immediate release *127
123 Transmission fault control alarm incoming side or immediate release *127
0 Reserved *127
3 Normal clearing 16
4 User busy 17
5 No user responding 18
6 Call rejected 21
7 Number changed 22
10 Address incomplete 28
11 Facility rejected 29
13 Normal, unspecified 31
14 No channel/circuit available 34
16 Temporary failure 41
30 A suspended call exists but this call identity does not *95
34 Incompatible destination 88
58 No route to destination 3
83 Preemption 8
85 Subscriber absent 20
107 Call having the requested call identity has been cleared *127
2 Channel unacceptable *6
13 Normal, unspecified 31
14 No channel/circuit available 34
16 Temporary failure 41
30 A suspended call exists but this call identity does not *83
58 No route to destination 3
83 Preemption *8
0 User 0
3 Transit network 3
7 International network 7
0 User 0
3 Transit network 3
7 International network 7
0 User 0
3 Transit network 3
4 Remote local network 4
7 International network 7
10 Unknown 11
0 User 0
3 Transit network 3
7 International network 7
0 User 0
3 Transit network 3
7 International network 7
0 User 0
3 Transit network 3
7 International network 7
10 Beyond an interworking point 10
0 User 0
2 Local network 2
3 Transit network 3
7 International network 7
11 Unknown *10
0 User 0
3 Transit network 3
7 International network 7
11 Unknown *10
0 User 0
3 Transit network 3
7 International network 7
11 Unknown *10
0 User 0
3 Transit network 3
7 International network 7
10 Beyond an interworking point 10
11 Unknown *10
0 User 0
3 Transit network 3
7 International network 7
11 Unknown *10
0 User 0
3 Transit network 3
7 International network 7
11 Unknown *2
14 Package handler *2