Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
S7-Youth
SD-Card Upgrade User Guide
Contents
1.1 Directory list of SD card upgrade package ....................................................... 3
|--dload(directory)
|-- update.app (mandatory, SD card upgrade package)
|-- unlmt.cfg(mandatory)
|-- preset (optional)
|--cust.zip
1.2.1 Notes:
2) Make sure your tablet has more than 30% power, or connect tablet with charger.
3) Make sure the SD-card has enough room (more than 2G) for copying upgrade file, and
the format is FAT32 (You can put SD-card into card-reader, and connect to computer, it
will be shown in “my computer”. Right click it, select „property‟, check file system, it
should be FAT or FAT32. If it is NTFS, the card can‟t be used for upgrade).
4) Before finish upgrading, do not remove SD-card or power, do not turn off power.
1) Please copy dload directory (update.zip, unlmt.cfg)to the father directory of SD card.
4) The tablet will begin SD card upgrade automatically when powered on.
5) If the device has screen, the screen will display as follow during normal upgrade process:
7) After upgrade successful, remove SD-card the tablet will boot up automatically, and it can be
used normally.
8) Confirm the new build number: go into “Settings”—>“About tablet” —> “Build number” to
If upgrade failed, please remove the SD-card long press the POWER key to close the tablet.
And please check whether the upgrade file is full or not, or upgrade path is right or not. The log
which generated in father directory in SD card during upgrade can help the developer to find the
fail reasons.