Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
dtrxPowerDownThreshold 0
dtrxPowerUpThreshold 4
dtrxPowerDownSupervisionPeriod 10
mcpaRFSharingInfo 0
mcpaIdentityPortId 0
Intelligent MCPA TRX shutdown
mcpaIdentityPosition 0
mcpaIdentityNumber 0
mcpaTrxPortId 0
mcpaTrxPosition 0
mcpaTrxNumber 0
2GTRXPowerDownThreshold 12
2GTRXPowerUpThreshold 4
2G TRX Automatic Power Down 2GTRXPowerDownSupervisionPeriod 10
TRXDDUAssociation
ServerTRXId 255
Counter Recommended Value
6 PWDT SEG-BTS
PWUT SEG-BTS
PWDPRD BSC
MCPARF BCF
MCPAIP BCF
MCPAIS BCF
MCPAIN BCF
TMCPAT TRX
TMCPAP TRX
TMCPAN TRX
DTRX POWER DOWNTIME DUE TRAFFIC #N/A #N/A
AVE TCH TSL LOCKED POWER DOWN #N/A #N/A
#N/A #N/A
DDU TRX
- TRX
Recommended Value
Cluster Count - Cluster
(empty)
Total Result
lbpsLastCellRTXMinLoa 0
lbpsRTXMaxLoad 0.6
lbpsRTXMinLoad 0.2
lbpsRTXCellCapOfset 0.8
actLBPowerSaving 0
energySavingState notEnergySaving (0)
lbpsCellList 0
lbpsCellSOOrder 100
lbpsPeriodList 0
lbpsDayOfWeek 0
Load-based Power Saving with Tx Path Switching Of
lbpsDuration 0
lbpsStartTimeHour 0
lbpsStartTimeMinute 0
psGrpId 0
lbpsISONCtlEnabled 1
lbpsLastCellMinLoad 0
lbpsLastCellSOEnabled 0
lbpsMaxLoad 0.6
lbpsMinLoad 0.2
lbpsPdcchLoadOfset 0.04
actMicroDtx 0
mdtxAggressiveness 0.4
eNodeB Power Saving – Micro-DTX
mdtxPdcchSymb 3
Counter
SAMPLES_CELL_RTX_PWR_SAVING On-line MRBTS/LNBTS
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS
ySaving (0) Not modifiabl MRBTS/LNBTS/LNCEL
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/PSGRP
On-line MRBTS/LNBTS/LNCEL
Description Range and step Parameter Name Default Value
This parameter activates the feature LTE1203 'Load-Based Power Saving with TX-Path - if actLBRTXPowerSaving
Switch Of'. When theisfeat 'tr
Activate load-based
0 (false), 1 (true)
reduced TX power saving
LTE1203 Load-Based
If the aggregate Power
power group Saving
load ofis the
not enabled
meant topower be used withlast
group eNBs thatissupport
cells* below actLBRTXPowerSaving
RF last
the Sharing (BTSSCL-rfSharing
cell low-water and
mark act
fo
Load-based power saving lbpsLastCellRTXMinLoad must
0...100 %, step 1 % last cell reduced TX min 0 %
All switched of TX paths will be switched on at all power group cells when not in a power saving period.
highLoadGbrDl, load The lbpsRTXMinLoad value is u
Load-based power saving
highLoadNonGbrDl, and
0...100 %, step 1 % reduced TX maximum 60 % lbpsRTXMaxLoad must be grea
highLoadPdcchDl.
load
Load-based power saving lbpsRTXMinLoad must be less t
lbpsRTXMinLoad is used except when determining whether the last enabled cell in the Power Group with all TX p
0...100 %, step 1 % reduced TX minimum 20 %
load The lbpsRTXMinLoad value is u
All switched of TX paths will be switched on atLoad-based all power grouppowercells when not in a power saving period.
saving
Defines the percent cell throughput at a reduced TX path cell relative to the full TX path cell throughput expecte
50...95 %, step 1 % reduced TX cell capacity 80 %
The cell throughput is expected to be decrease due to the change in supported transmission mode by the cell w
ofset
This parameter activates the feature LTE1103 Activate 'Load-Based load-based
Power Saving for Multi-LayeredloadSettingsNetworks'.
must be When
configure
the
0 (false), 1 (true)
LTE1103 Load-Based Power Saving is not meant power
to besaving
used with eNBs that support- if RFactLBPowerSaving
Sharing (BTSSCL:rfSharing
is 'true'
Energy Saving state of 2: thereducedEnergySaving
cell.
Energy saving state 0
The Energy Saving state 4:value
switchingOfRTX
is set by the eNB.
Load-based power saving
List of cells that service the same coverage a
cell list
Each cell within a power group
lbpsCellSOOrder value of 100 has a special meaning Load-based
basedpower saving
on lbpsLastCellSOEnable value:
1...100, step 1 100
- If lbpsLastCellSOEnable is true, the cell has the celllowest
switchcell of resource
order switch of order value.
If actProSeComm is set to 'true
- If lbpsLastCellSOEnable
List of periods during which is false,
powerthe cell resources
saving mayLoad-basedcannotpower
be initiated be the
for switched
saving of.
cells in the Power Group.
A period is defined as the time between a startperiod time and
list an end time within a day of the week. There may be m
2: Tue
Load-based power saving
The load-based power sa 3: Wed
day of week
4: Thu
Load-based power saving
The load-based power s1...1440 min, step 1 mi
duration
The load-based power saving start time hour parameter, Load-basedalong powerwithsaving
the load-based power saving start time min
0...23 h, step 1 h
The eNB does not consider daylight saving time. start time hour
Load-based power saving
The load-based power sa 0...59 min, step 1 min
start time minute
0: notSuspended Load-Based Power Saving
Indicates whether Energ 0
1: suspended Suspended
Power saving group
Instance identifier of 0...999, step 1
identifier
Flag which indicates whether the iSON Manager is enabled to control the power group's cell membership and ce
Load-based power saving
If lbpsISONCtlEnabled is0 set
(false),
to true,
1 (true)
the iSON Manager application can create, delete 0 and 0 modify the power grou
iSON control enabled
If lbpsISONCtlEnabled is set to false, the iSON Manager cannot add cells to, or
Defines the low-watermark for the load of the last enabled cell of a power group. lbpsLastCellMinLoadremove cells from, the power
must be groul
Load-based power saving
0...100 %, step 1 % 0%
last cell minimum load
If thewhich
Flag powerdetermines
group loadwhether
is belowthe thelast
lastenabled
cell low-water
power mark
Load-based group (lbpsLastCellMinLoad),
powercellsaving
may have resources The thelbpsMinLoad
eNB will of
switched switch
value
and of is aused
whether cell
If lbpsLastCellSOEnabled 0 (false),
is true, 1the(true)
last enabledlast cell
cell and
switchtheof cells with the special If actProSeComm
handling cell switchis setoftoorder
'true
It is recommended that lbpsMaxLoad
If lbpsLastCellSOEnabled is false, neither be less
the than
last the following
enabled
enabled cell norload-balancing
the cells withthreshold
the special parameters to reduce
handling cell switch t
Load-based power saving
0...100 %, step 1 % 60 % lbpsMaxLoad must be greater
LNCEL::
The eNBintraFreqLbLoadThresholds
will switch of a power group parameters: maximum
cell in cell switch of load
order if the aggregate power group load is less than t
highLoadGbrDl, lbpsMinLoad must be less than
Load-based power saving
0...100 %, step 1 % 20 %
lbpsMinLoad is used except when determiningminimum whether the loadlast enabled cell in the Power Group may be switche
The lbpsMinLoad value is used
Load-based power saving
The power group PDCCH 0...100
load average
%, step 1 may
% be greater than the power group 4 % GBR and non-GBR load averages. L
PDCCH load ofset - raRespWinSize must be set to
This parameter activates the feature 'eNode BActivate power saving
eNode- B Micro
powerDTX'. - raContResoT must be set to '
0 (false), 1 (true)
It is possible to reduce power consumption by saving having-the Micropower
DTXamplifiers associated - (actEicic
with aiscell
setshut
to 'false')
down OR duri(
Micro-DTX
This parameter control 0.1...0.6, step 0.05 0.4 -IfifactMicroDtx
actMBMS isisset settoto'true'
true,form
aggressiveness
Number of non-muted
Number of PDCCH symbols left non-muted by micro-DTX, if the cell is empty.
1...3, step 1 PDCCH symbols if cell is 3 If actMicroDtx is set to true, m
Temporarily overrides the maxNrSymPdcch value for muted subframes, when eNB is in mdtxMinimumState and
empty
RTXPowerSaving is 'true'
XPowerSaving and actSuperCell are mutually exclusive. Both parameters are not allowed to be configured to value ‘true’ at
CellRTXMinLoad must be less than or equal to lbpsRTXMaxLoad.
RTXMinLoad value is used for all but the last enabled cell in the power group in which case the lbpsLastCellRTXMinLoad val
RTXMinLoad value is used for all but the last enabled cell in the power group in which case the lbpsLastCellRTXMinLoad val
l within a power group must be assigned to a unique cell switch of order value (lbpsCellSOOrder) with the exception that m
SeComm is set to 'true' and if a LNCEL with earfcnUL and ulChBw equal to slEarfcnUL and slUlChBw of a SLCOMMPROF inst
MinLoad value is used for all but the last enabled cell in the power group in which case the lbpsLastCellMinLoad value is us
SeComm is set to 'true' and if a LNCEL with earfcnUL and ulChBw equal to slEarfcnUL and slUlChBw of a SLCOMMPROF inst
MinLoad value is used for all but the last enabled cell in the power group in which case the lbpsLastCellMinLoad value is us
r) with the exception that multiple cells within a power group may be assigned to the special value of 100.
hBw of a SLCOMMPROF instance is configured in PSGRP-lpbsCellList of a PSGPR instance, i.e. it’s lnCelId is contained in this
lnCelId is contained in this list, then lbpsCellSOOrder of this list item must be set to ‘100’ and lbpsLastCellSOEnabled of th
lnCelId is contained in this list, then lbpsCellSOOrder of this list item must be set to ‘100’ and lbpsLastCellSOEnabled of th
bpsLastCellSOEnabled of the according PSGRP instance must be set to ‘false’.