Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
VEE 7 10 S0
Applications GND 8 9 S1
Function Table
Control Input On Channel
___
E S1 S0 –
L L L nY0 nZ
L L H nY1 nZ
L H L nY2 nZ
L H H nY3 nZ
H X X None
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and
Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total
Br + Cl) and <1000ppm antimony compounds.
10mF 0.1mF
10mF
2Y0
1 VCC 16
10mF 10mF
100K 2 2Y2 1Y2 15
10mF 10mF 100K
3 2Z 1Y1 14
10mF 10mF
4 2Y3 1Z 13
100K AZ4052
10mF 10mF
5 2Y1 1Y0 12 100K
10mF
6 E 1Y3 11
7 VEE S0 10
8 GND S1 9
Pin Description
VCC
16
13 1Z
12 1Y0
14
1Y1
10 15
S0 1Y2
Logic 11
1-OF-4 1Y3
Level
9
Conversion Decoder 1 2Y0
S1
5 2Y1
6 2
E 2Y2
4 2Y3
3
2Z
8 7
GND VEE
nYn
VCC VEE
VCC VCC
VCC VEE
nZ
VEE
From
Logic
VCC-GND 3.0 – 10
VIN Supply Voltage V
VCC-VEE 3.0 – 10
Electrical Characteristics
DC Characteristics
VIS is the input voltage at pins nYn or nZ, whichever is assigned as an input; V OS is the output voltage at pins nZ or nYn, whichever is assigned as
an output, voltages are referenced to GND (Ground = 0V).
Conditions
Symbol Parameter Min Typ Max Unit
Other VCC (V) VEE (V)
5.0 – 2.8 – –
VIH High-level Input Voltage – V
10 – 6.0 – –
5.0 – – – 1.5
VIL Low-level Input Voltage – V
10 – – – 3.0
5.0 0 – – ±1.0 µA
ILI Input Leakage Current VI = VCC or GND
10 0 – – ±1.0 µA
VI = VIH or VIL,
︱VS︱= VCC-VEE 5.0 – – – ±1.0 µA
Analog Switch (Figure 1)
IS (Off)
Off-state Current Per Channel 10 0 – – ±1.0 µA
Resistance RON
VIS is the input voltage at pins nYn or nZ, which is assigned as an input ((Note 7) see figure 3)
Conditions
Symbol Parameter Min Typ Max Unit
Other VCC (V) VEE (V) IS (µA)
AC Characteristics
GND = 0V, tr = tf = 6ns, CL = 50pF
Conditions
Symbol Parameter Min Typ Max Unit
Other VCC (V) VEE (V)
Recommended conditions and typical values, GND = 0V, TA = +25°C, CL = 50pF. VIS is the input voltage at pins nYn or nZ, whichever is assigned
as an input. VOS is the output voltage at pins nYn or nZ, whichever is assigned as an output.
Conditions
Symbol Parameter Min Typ Max Unit
Other VIS(p-p) (V) VCC (V) VEE (V)
LOW HIGH
(From Select Input) (From Select Input)
nYn nZ nYn nZ
A A A
VEE VEE
Figure 1. Test Circuit for Measuring OFF-state Current Figure 2. Test Circuit for Measuring ON-state Current
HIGH
(From Select Input) 10mF
V nYn/nZ nZ/nYn
VIS Vos
nYn nZ
RL dB
Channel CL
ON
VIS=0 to VCC-VEE IIS GND
VEE
Figure 3. Test Circuit for Measuring RON Figure 4. Test Circuit for Measuring Sine-wave Distortion
and Minimum Frequency Response
CIN
RL nYn/nZ nZ/nYn
VIS
Vos
RL CL
Channel
ON GND
CIN
nYn/nZ nZ/nYn (a) Channel ON Condition
VIS Vos
RL dB
Channel CL
OFF
GND
CIN
nYn/nZ nZ/nYn
VIS
Vos
RL RL dB
Channel CL
OFF GND
Figure 5. Test Circuit for Measuring Switch Figure 6. Test Circuits for Measuring Crosstalk
Off Signal Feed-through between Any Two Switches/Multiplexers
VCC
V(p-p)
VCC VIS Open
RL
VCC VCC
Sn or E VI VO
Pulse
Generator DUT
2RL 2RL
nYn/nZ nZ/nYn RT CL
DUT
GND
VEE
2RL 2RL Oscilloscope
CL
GND
VEE
Figure 7. Test Circuit for Measuring Figure 8. Test Circuit for Measuring AC
Crosstalk Performance between Control and Any Switch
Performance Characteristics
80 70
VCC=5V,VEE=0V 65 VCC=10V
75
VEE=0V
60
70
55
65
50
RDSON ()
RDSON ()
60 45
40
55
35
50
30
45
25
40 20
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 2 4 6 8 10
10 VCC=10V,VEE=0V
10 VCC=5V,VEE=0V
RL=10k RL=10k
f=1kHz f=1kHz
1
1
THD+N (%)
THD+N (%)
0.1
0.1
0.01
0.01
1E-3
0.1 1 0.1 1
Figure 11. THD+N vs. Output Voltage Amplitude Figure 12. THD+N vs. Output Voltage Amplitude
1 20
10 VCC=5V, VEE=0V
0 0 RL=10k
-2 -50
-60
-70
-3
-80
-90
-4 VCC=2.5V, VEE=-2.5V -100
RL=10K -110
-120
-5 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20
1k 10k 100k 1M 10M 100M
20
10 VCC=5V, VEE=0V
VCC=10V, VEE=0V
0 RL=10k
Signal Output Voltage (dBV)
-10
f=1kHz
-20
1V/div
VIS
-30
-40
-50
-60
-70
1V/div
-80
VOS
-90
-100
-110
-120
-120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20
0
VCC=5V, VEE=0V
-10 VCC=5V, VEE=0V
-20 RL=10k
1V/div
VOS
-50
-60
-70
1V/div
-80
VIS
-90
-100
-110
-120
-130
100 1k 10k 100k
0
-10 VCC=10V,VEE=0V
-20 RL=10k VI
-30 VIS
2Y0 to 1Y0
-40 1Y0 to 2Y0 Output 50%
Crosstalk (dB)
-50
GND
-60
-70
tPLH tPHL
-80 VOH
-90
VOS 50%
-100
Output
-110 VOL
-120
-130
-140
100 1k 10k 100k
Frequency (Hz)
Figure 19. Crosstalk vs. Frequency Figure 20. Waveforms Showing the Input (VIS)
to Output (VOS) Propagation Delays
tr tf
E,SN 90% tW
VM Amplitude
Input 10% 90%
Negative
Input Pulse VM
tPLZ tPZL
10% 0V
VOS
50% tTHL (tf) tTLH (tr)
Output
10% tTLH (tr) tTHL (tf)
tPHZ tPZH 90%
Amplitude
Positive
90% Input Pulse VM
VOS 50% 10%
0V
Output
Switch Switch Switch tW
ON OFF ON
Figure 21. Waveforms Showing the Turn-on and Turn-off Times Figure 22. Input Pulse Definitions
(VM = 50%, VI = GND to VCC)
tr and tf
Amplitude VM
Fmax Pulse Width Other
Ordering Information
AZ4052 X X – X
Temperature
Package Part Number Marking ID Packing
Range
AZ4052M-G1 AZ4052M-G1 25/Tube
SOIC-16 -40 to +85C
4,000/13”/
AZ4052MTR-G1 AZ4052M-G1
Tape & Reel
DIP-16 -40 to +85C AZ4052P-G1 AZ4052P-G1 25/Tube
D
D1
7°
0.310(0. 012)
0.510(0. 020) 7° A
20:1
B 0.250(0.010) 0.400(0. 016)
1.270(0. 050)
10.200(0.402)
9.800(0.386)
0°
8°
R 0.070(0. 003)
1.270(0.050)
0.200(0. 008)
BSC
R 0.070(0. 003)
0.200(0. 008)
0.200(0.008)
5.800(0. 228) 0.050(0.002) 0.250(0.010)
0.170(0.007)
6.240(0. 246)
0.250(0.010)
0.250(0.010)
C-C
3.800(0. 150) 50:1
4.040(0. 159) 8° B
9.5 20:1
°
1.000(0.039)
C
0.200(0. 008)
3° Sφ1.000(0. 039)
7° 8° Depth 0.200(0.008)
A
0.150(0.006) C
8° ×45 °
0.400(0.016)
D D1
Symbol
min(mm) max(mm) min(inch) max(inch) min(mm) max(mm) min(inch) max(inch)
7.320(0.288) 0.700(0.028)
3.710(0.146) 7.920(0.312)
1.524(0.060) TYP 4.310(0.170) 5°
6° 6°
4° 3.200(0.126)
4° 3.600(0.142)
Φ3.000(0.118)
Depth
0.050(0.002)
0.150(0.006)
0.204(0.008)
0.360(0.014) 2.540(0.100) 0.510(0.020)MIN 0.360(0.014)
0.560(0.022) TYP 8.200(0.323)
3.000(0.118)
3.600(0.142) 9.400(0.370)
6.200(0.244)
6.600(0.260)
18.800(0.740)
19.200(0.756)
R0.750(0.030)
Z
G
X
E
Z G X Y E
Dimensions
(mm)/(inch) (mm)/(inch) (mm)/(inch) (mm)/(inch) (mm)/(inch)
Value 6.900/0.272 3.900/0.154 0.650/0.026 1.500/0.059 1.270/0.050
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
www.diodes.com