Sei sulla pagina 1di 1454

1-06

REGULAR WOOD SHELL BLOCKS FOR MANILA ROPE


• Hard wood shells
• Drop-forged fittings
• Available with bronze self-lubricating
Screw Pin bushings
Anchor Shackle, Flatted, Loose
• Galvanized metal parts
Fitting “K” Swivel Hook
with Latch,
Fitting “G”
Single Double Triple
3001 AF 3002 AF 3003 AF
Specifications
Block Size
in. mm in. mm in. mm in. mm in. mm in. mm
3 76 4 102 5 127 6 152 8 203 10 254
Diameter
3 1 5 3 1
Rope ⁄8 10 ⁄2 13 ⁄8 16 ⁄4 19 1 25 1 ⁄8 29
Sheave Size
3 1 1 3 1
O.D. 1 ⁄4 44 2 ⁄4 57 3 76 3 ⁄2 89 4 ⁄4 121 6 ⁄4 159
Rim 1 5 3 1 1
Thickness ⁄2 13 ⁄8 16 ⁄4 19 1 25 1 ⁄8 29 1 ⁄4 32
Center Pin 3 3 3 1 5 5
Dia. ⁄8 10 ⁄8 10 ⁄8 10 ⁄2 13 ⁄8 16 ⁄8 16
Weight
lb kg lb kg lb kg lb kg lb kg lb kg
1 1
Single 1 .4 2 1 2 ⁄2 1 4 2 9 ⁄2 4 17 8
1 1
Double 1 ⁄2 1 3 1 4 2 6 ⁄2 3 13 6 25 11
1
Triple 2 1 4 2 5 ⁄2 2 9 4 17 8 32 15
Working Load Limit
lb kg lb kg lb kg lb kg lb kg lb kg
Single 500 227 1000 454 1200 544 1800 816 2800 1270 4000 1814
Double 800 363 1400 635 1800 816 2500 1134 3800 1724 6000 2722
Triple 1200 544 1800 816 2400 1089 3200 1452 4800 2177 8000 3629
Working Loads are Resultant Working Loads.

Block Size
Inch Inch Inch Inch Inch Inch
3 4 5 6 8 10
Fittings
Cat. Cat. Cat. Cat. Cat. Cat.
Type No. No. No. No. No. No.
Round Loose Hook “AF”
Single 7205336 7205436 7205536 7205636 7205836 -
Double 7206836 7206936 7207036 7207136 7207336 -
Triple 7208436 7208536 7208636 7208736 7208936 -
Loose, Swivel Hook with Latch “G”
Single - 7205434 7205534 7205634 - -
Double - 7206934 7207034 7207134 7207334 -
Triple - 7208534 7208634 7208734 - -
Screw Pin Anchor Shackle “K”
Single 7205335 7205435 7205535 7205635 7205835 7206035
Double 7206835 7206935 7207035 7207135 7207335 7207535 DO NOT EXCEED THE
Triple 7208435 7208535 7208635 7208735 7208935 - WORKING LOAD LIMIT.

COAST MARINE & INDUSTRIAL SUPPLY, INC.


398 Jefferson St., San Francisco, CA 94133
Tel: 415-673-1923 • 800-433-8050 • Fax: 415-673-1927
West Coast E-Mail: comarsf@aol.com • Web: www.comarsf.com
Manufacturers
of the World’s
Stocking Distributors Longest Ladders
02 4/23/06 5:08 PM Page 0002

2-06

DROP LINK, MANILA ROPE SNATCH BLOCKS


• Shells from wood or steel
• Cross-bolted shell
• Fittings drop forged; metal parts galvanized
• Available with bronze self-lubricating bushing
• Drop link snatch blocks are primarily used as Stiff Swivel Hook
lead blocks; not recommended for hoisting with Latch,
Fitting “V”

Block Size (in.) 4 6 8 10


3 7 1
Rope Diameter ⁄4 ⁄8 1 1 ⁄4
Sheave Size
1 3
O.D. 2 3 4 ⁄2 5 ⁄4 Steel, 3073 V
Wood, 3071 V
7 1 3 7
Rim Thickness ⁄8 1 ⁄8 1 ⁄8 1 ⁄8
5 3 7
Bearing Diameter ⁄8 ⁄4 ⁄8 1
Block Size (in.) 4 6 8 10
3 1 5 3
Center Pin Dia. ⁄8 ⁄2 ⁄8 ⁄4 Fittings Cat. Cat. Cat. Cat.
Type No. No. No. No.
Weight lb lb lb lb
1 Stiff Swivel Hook with Latch “V”
Wood, 3071 2 9 12 ⁄ 2 23
Bronze Bushed, Galvanized Wood, 3071 7265486 7265686 7265886 7266086
Steel, 3073 2 6 13 23 Bronze Bushed, Galvanized Steel, 3073 7265496 7265696 7265896 7266096
Working Load Limit lb kg lb kg lb kg lb kg Bronze Bushed, Pressure Wood, 3071 - 7265616 7265816 7266016
750 340 2400 1089 4800 2177 6600 2994 Greased Lug. Galvanized Steel, 3073 - 7265626 7265826 7266026
Working Loads are Resultant Working Loads.

SAFETY LOCKING, MANILA ROPE SNATCH BLOCKS

• Wood or steel shells


• Roller or bronze self-lubricated bushings
• Drop forged fittings
• Painted or galvanized fittings
Stiff Swivel Hook
with Latch,
Block Size (in.) 4 6 8 10 Fitting “V”
3 7 1
Rope Diameter ⁄4 ⁄8 1 1 ⁄4
Sheave Size
1 3
O.D. 2 3 4 ⁄2 5 ⁄4
7 1 3 7
Rim Thickness ⁄8 1 ⁄8 1 ⁄8 1 ⁄8
5 3 7 Wood, 3072 V
Bearing Diameter ⁄8 ⁄4 ⁄8 1 Steel, 3074 V
3 1 5 3
Center Pin Dia. ⁄8 ⁄2 ⁄8 ⁄4
Weight lb lb lb lb Block Size (in.) 4 6 8 10
1 Fittings Cat. Cat. Cat. Cat.
Wood, 3072 2 9 12 ⁄ 2 23
Type No. No. No. No.
1
Steel, 3073 2 ⁄2 6 13 23 Stiff Swivel Hook with Latch “V”
Working Load Limit lb kg lb kg lb kg lb kg Bronze Bushed, Galv. SL Wood, 3072 7266986 7267186 7267386 –
800 363 3000 1364 5000 2268 8000 3629 Bronze Bushed, Galv. SL Steel, 3074 7266996 7267196 7267396 7267596
Working Loads are Resultant Working Loads. SL stands for self-lubricating bushings

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
03 4/23/06 5:09 PM Page 0003

3-06

STEEL BLOCKS FOR MANILA OR FIBER ROPE

• Steel shells
• Available with bronze self-lubricating bushings
• Galvanized finish
Flatted, Loose Screw Pin
Swivel Hook Anchor Shackle,
Single Double with Latch, Fitting “K”
3041 AF 3042 AF Fitting “G” Block Size (in.) 3 4 5 6 8
3 1 5 3
Rope Diameter ⁄8 ⁄2 ⁄8 ⁄4 1
Block Size (in.) 3 4 5 6 8 Sheave Size
3 1 1 3
Fittings Cat. Cat. Cat. Cat. Cat. O.D. 1 ⁄4 2 ⁄4 3 3 ⁄2 4 ⁄4
Type No. No. No. No. No. 1 5 3 3
Round LooseHook “AF”
Rim Thickness ⁄2 ⁄8 ⁄4 1 1 ⁄8
3 3 3 1 5
Bronze SL Single 7245335 7245435 7245535 7245635 7245835 Center Pin Dia. ⁄8 ⁄8 ⁄8 ⁄2 ⁄8
Bushed, Double 7246835 7246935 7247035 7247135 7247335 Weight lb lb lb lb lb
Galvanized Triple *7248435 7248535 - *7248735 7248935 1 1
Single 1 ⁄2 2 ⁄2 4 6 11
Flatted, Loose, Swivel Hook with latch “G”
1 1 1
Bronze SL Single 7245334 7245434 7245534 - - Double 2 3 ⁄2 6 9 ⁄2 16 ⁄ 2
Bushed, Double - 7246934 - 7247134 - 1 1
Triple 2 ⁄2 4 ⁄2 8 12 23
Galvanized Double - 7248534 - - -
Working Load Limit lb kg lb kg lb kg lb kg lb kg
Screw Pin Anchor Shackle “K”
Single 700 318 1100 499 1300 590 2000 907 3300 1497
Bronze SL Single 7245336 7245436 7245536 7245636 7245836
Bushed, Double - 7246934 - 7247134 - Double 1000 454 1600 726 2200 998 3300 1497 5100 2313

Galvanized Double - 7248534 - - - Triple 1400 635 2200 1089 3200 1452 4000 1814 7000 3175
* Note: These items are made to order Working Loads are Resultant Working Loads.

REGULAR DIAMOND & OVAL WIRE ROPE BLOCKS


• Steel shells with steel or iron sheaves
• Drop forged fittings
• Bronze self-lubricating bushings or grooved bronze
bushings with pressure grease lubrication
Stiff Swivel Hook Round Pin • Available painted or galvanized
with Latch, Chain Shackle.
Fitting “V” Fitting “L”
Block Size (in.) 4 6 8
3 3
Rope Diameter ⁄8 ⁄ 8 - 1⁄ 2 1
⁄ 2 - 5⁄ 8
Sheave Size
Single Double O.D. 4 6 8
4011 L 4012 L 4001
3 1
Rim Thickness ⁄4 1 1 ⁄4
1 3 7
Block Size (in.) 4 6 8 Center Pin Dia. ⁄2 ⁄4 ⁄8
Fittings Cat. Cat. Cat. Weight lb lb lb
Type No. No. No.
Single 8 16 26
Swivel Hook with Latch “V”. Self-lube bronze bushings
Bronze SL Diamond Bushings, Double 11 24 38
Steel Sheaves, Painted Single 7280429 7280629 7280829 Triple 14 32 55
Round Pin Chain Shackle “L”. Self-lube bronze bushings Working Load Limit ton kg ton kg ton kg
Bronze SL Diamond Bushings, 1
Steel Sheaves, Painted Single 7280424 7280624 7280824 Single 1 907 2 1814 2 ⁄ 2 2268
Galvanized Regular Oval Wire Rope Blocks, Fitting “L” 1 1 1
Double 1 ⁄2 1361 2 ⁄ 2 2268 3 ⁄ 2 3175
4011 Oval, Iron Sheaves Single 7275434 7275634 7275834
1
4012 Oval, Iron Sheaves Double 7276934 7277134 7277344 Triple 2 1814 3 2722 4 ⁄ 2 4082
Working Loads are Resultant Working Loads.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0004-04 4/23/06 5:11 PM Page 1

4-06

SKOOKUM
WIDE SHEAVE – WIDE THROAT BLOCKS
3 Ton to 26 Ton Capacity
Manganese Long-Life Sheaves

110-A, 110-AR, R-4 R-6, R-8 R-10 508

SPECIFICATIONS
Block Sheave Sheave Pin Line Type Weight Safe Working
Number Size (in.) Size (in.) Size (in.) Bearing (lbs.) Load* (lbs.)
110-A 4 x 1-3/8 1-1/4 3/8 Bronze 12 10,000
110-AR 4 x 1-3/8 1-1/4 3/8 Roller 12 10,000
R-4 4 x 1-3/8 1-1/4 3/8 Roller 12 10,000
R-6 6x3 1-3/8 3/8 - 1/2 Timken 30 16,000
R-8 8x3 1-3/8 1/2 - 5/8 Timken 43 16,000
R-10 10 x 4 1-3/8 1/2 - 5/8 Timken 50 18,000
508 8x4 2 1 – 1-1/8 Tinken 72 30,000
80 80 8x4 2 1-1/8 – 1-1/4 Timken 80 32,000 TM-10
TM-10 10 x 5 2-1/2 1-1-1/4 Timken 110 50,000
*Ultimate strength is 5 times safe working load.

110-A, R-4 R-6, R-8, R-10 508, 80, TM-10


DIMENSIONS
Block A B C D E F G
Number (in.) (in.) (in.) (in.) (in.) (in.) (in.)
110-A 10 1-3/4 1 2-1/2 5-1/4 1 4-3/4
110-AR 10 1-3/4 1 2-1/2 5-1/4 1 4-3/4
R-4 10 1-3/4 1 2-1/2 5-1/4 1 4-3/4
R-6 14-1/2 8 2-1/2 4-1/2 6-1/2 1-1/4 6-3/4
R-8 17 8-1/2 2-1/2 4-3/4 7-1/4 1-3/8 8-3/4
R-10 19-1/2 8 3-1/2 4-3/4 7-1/2 1-3/8 10-1/2
508 15 11 4 5-1/4 6-1/2 2 9-1/2
80 20 10-1/2 3-1/2 4-1/2 10-1/2 2 10
TM-10 20 12 4-1/2 6 9 2 11-1/2
Dimensions shown are for regular yoke blocks. Dimensions for blocks with swivel hook or swivel shackle attachments, where
applicable, available on request
P. O. Box 280
Hubbard, OR 97032
Tel: (503) 651-3175
An Ulven Company (800) 547-8211
Manufacturer of Skookum Blocks, Skookum Alloy Shackles, Fax: (503) 651-3409
and Custom-Designed Marine Products E-mail: skookum@ulvencompanies.com
Also available: Balanced Head Fairleads, Vertical & Horizontal Deck Lead Sheaves Web: www.skookumco.com
0005-04 4/23/06 5:12 PM Page 1

5-06

SKOOKUM
HEAVY DUTY BLOCKS: 21.5 Ton to 29 Ton Capacity
SPECIFICATIONS
Block Sheave Sheave Pin Line Weight Safe Working
Number Size (in.) Size (in.) Size (in.) (lbs.) Load* (lbs.)
2210A 10 x 2-1/2 2 7/8 - 1 83 43,000
2210A, 2212
2214 2212 12 x 2-1/2 2 1-1/8 – 1-1/4 111 44,000
21 12 x 2-1/2 2 1-1/2 117 44,000
Bearing
Timkin

2214 14 x 2-1/2 2 1-1/8 – 1-1/4 130 44,000


2216B 16 x 2-1/2 2-5/8 1-1/8 – 1-1/4 150 50,000
2218A 18 x 2-1/2 2-5/8 1-1/8 – 1-1/4 255 55,000
2220 20 x 2-1/2 2-5/8 1 – 1/-18 157 55,000
2222 22 x 3 2-5/8 1-1/8 – 1-1/4 213 58,000
* Ultimate strength is 5 times safe working load.

2218A
DIMENSIONS
Block A B C D E F G H J K
Number (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)
2210A 18 7 2 2-3/4 2-3/4 4-1/4 2-1/4 2 1-3/4 11
2212 22 7-1/2 2 2-3/4 3 4-1/2 2-1/2 2 1-3/4 13
21 22 7 2 2-3/4 3 4-1/2 2-1/2 2 1-3/4 13
2214 25 7-1/2 2 2-3/4 3 4-3/4 2-1/2 2 1-3/4 15
2216B 26-1/2 8 2-1/8 3 3 4 2-1/4 2 1-3/4 16-5/8
2218A 31 9 2-1/4 3-1/2 4 5-1/4 4 2-3/8 2-1/8 19
2216B, 2220 2220 29-3/4 8 2-1/8 3 2-1/2 5-1/8 2-3/4 2 1-3/4 20-3/4
2222 2222 33-3/8 8 2-1/8 3-1/8 3-3/8 5-1/4 4-1/4 2-3/8 2-1/8 23

13 Ton to 50 Ton Capacity


SPECIFICATIONS
Block Sheave Sheave Pin Line Weight Safe Working
Number Size (in.) Size (in.) Size (in.) (lbs.) Load* (lbs.)
308 8 x 1-3/8 2-1/2 7/8 x 1 55 26,000
Bearing

310 10 x 2 3 1-1/8 x 1-1/4 120 41,000


Bronze

312 12 x 2-1/8 3 1-1/4 x 1-3/8 145 46,000


2214TM
2014 14 x 3 4 1-1/2 x 1-3/4 250 73,000
2218TM 2016 16 x 3 4 1-1/2 x 1-3/4 435 81,000
TRB240 BML-12 12 x 2 2-5/8 1-1/8 x 1-1/4 150 55,000
Bearing

2214-TM 14 x 2 2-5/8 1-1/4 x 1-3/8 265 57,000


Timken

2218-TM 18 x 2-1/2 2-5/8 1-1/4 x 1-3/8 315 57,000


2616 16 x 3 4 1-1/2 x 1-3/4 600 100,000
2624 24 x 3-1/2 4 1-1/2 x 2 850 150,000
* Ultimate strength is 5 times safe working load.
DIMENSIONS
BML-12 Block A B C D E F J K
2616, 2014 Number (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)
2016 308 18-1/2 7 1-3/4 2-3/4 2-1/2 7-1/2 1-3/4 8-1/8
310 22-1/2 9 1-3/4 2-3/4 3-1/2 8-1/2 2-1/4 11
312 24-1/2 9 1-3/4 2-3/4 3-1/2 8-3/4 2-1/4 13
2014 31 11-1/2 2-1/2 3 3 12 2-3/4 15
2016 35 12 2-1/2 3-1/2 5 15 2-3/4 17
BML-12 25 11-3/4 1-3/4 4-1/2 4 9 2-1/2 13
2214-TM 32 11-3/4 2-1/2 4-1/2 4-1/2 13-1/2 2-1/2 15-3/4
2218-TM 38 12 2-3/8 3-3/4 4-1/2 14 2-3/4 19-3/4
2616 37 12-1/2 3 4 7-3/4 15 3 17-1/2
308, 310
312 2624 46 14 3 5-1/4 8 15-1/2 3 29
P. O. Box 280
Hubbard, OR 97032
Tel: (503) 651-3175
An Ulven Company (800) 547-8211
Manufacturer of Skookum Blocks, Skookum Alloy Shackles, Fax: (503) 651-3409
and Custom-Designed Marine Products E-mail: skookum@ulvencompanies.com
Also available: Balanced Head Fairleads, Vertical & Horizontal Deck Lead Sheaves Web: www.skookumco.com
0006-04 4/23/06 5:13 PM Page 1

6-06

SKOOKUM
MULTI-PURPOSE BLOCKS
7 Ton to 17.5 Ton Capacity
412 414T, 416T
Yoke Full Side Block
Attachment

SPECIFICATIONS
Block Sheave Sheave Pin Line Weight Safe Working
Number Size (in.) Size (in.) Size (in.) (lbs.) Load✲ (lbs.)
T-6S 6 x 1-1/4 1-5/16 3/8 22 14,000
T-8 8 x 1-3/8 1-5/16 1/2 - 5/8 32 16,000
T-10S 10 x 1-3/4 1-5/16 5/8 - 3/4 44 16,000
T-12A 12 x 2 1-13/16 3/4 - 7/8 69 32,000
T-14 14 x 2 1-13/16 3/4 -7/8 79 32,000
410-A 10 x 2 1-1/2 3/4 48 25,000
Bearing
Timken

412-A 12 x 2-1/2 2 3/4 - 7/8 *1” 72 35,000


414-A 14 x 2-1/2 2 3/4 - 7/8 *1” 94 35,000
414-T 14 x 2-1/2 2 7/8 *1” 97 35,000
416 16 x 2-1/2 2 3/4 - 7/8 *1” 97 35,000
416-T 16 x 2-1/2 2 7/8 *1” 107 35,000
418 18 x 2-1/2 2 7/8 - 1 108 35,000
1010 10 x 2-1/2 2 7/8 - 1 75 35,000
510 10 x 2-1/2 2-1/4 7/8 - 1 70 35,000
Bearing
Bronze

512 12 x 2-1/2 2-1/4 7/8 - 1 80 35,000


514 14 x 2-1/2 2-1/4 7/8 - 1 90 35,000
✲ Ultimate strength is 5 times safe working load.
*1” Available on request.
DIMENSIONS (INCHES)
Block A B C D E F G H J K
Number
T-6S 11 5-1/2 1 2 1-3/8 4-1/4 2-1/2 1-1/8 1-1/16 6-3/4
T-8 16 5-1/2 1 2 1-3/8 4-1/4 2-1/2 1-3/8 1-5/16 8-3/4
T-10S 18 5-1/2 1-3/8 2-1/4 1-5/8 4-1/4 2-1/2 1-1/2 1-5/16 10-3/4
T-12A 20 5-7/8 1-1/2 2-3/4 2 4-1/2 2-3/8 1-1/2 1-5/16 12-5/8
T-14 22 5-7/8 1-1/2 2-3/4 2 3-1/2 2-3/8 1-1/2 1-5/16 14-3/4
410-A 18-1/2 5-1/2 1-3/4 2-3/4 1-3/4 4-1/2 2-1/2 1-1/2 1-1/4 11
412-A 21 6-1/4 2 3 2-3/8 4-3/4 2-1/2 1-3/4 1-5/8 12-1/2
414-A 23 6-1/4 2 3 3-3/8 4-3/4 2-1/2 1-3/4 1-5/8 15
414-T 25 6-1/4 2 3 2-3/8 4-3/4 – 1-3/4 1-5/8 15
416 25 6-1/4 2 3 2-3/8 4-3/4 2-1/2 1-3/4 1-5/8 17
416-T 27 6-1/4 2 3 2-3/8 4-3/4 – 1-3/4 1-5/8 17
418 27 6-1/4 2 3 2-3/8 4-3/4 2-1/2 1-3/4 1-5/8 19
1010 19 6-1/4 2 2-1/2 2-3/4 2 2-1/2 2 1-3/4 11
510 19 6-1/4 2 2-1/2 2-3/4 3-1/2 2-1/2 2 1-7/8 11
512 22 6-1/4 2 2-1/2 2-3/4 3-1/2 2-3/4 2 1-7/8 13
514 24 6-1/4 2 2-1/2 2-3/4 3-1/2 2-3/4 2 1-7/8 15
MANGANESE LONG-LIFE SHEAVES
P. O. Box 280
Hubbard, OR 97032
Tel: (503) 651-3175
An Ulven Company (800) 547-8211
Manufacturer of Skookum Blocks, Skookum Alloy Shackles, Fax: (503) 651-3409
and Custom-Designed Marine Products E-mail: skookum@ulvencompanies.com
Also available: Balanced Head Fairleads, Vertical & Horizontal Deck Lead Sheaves Web: www.skookumco.com
0007-04 4/23/06 5:14 PM Page 1

7-06

SKOOKUM
HALF SIDE BLOCKS
5 Ton to 13.5 Ton Capacity

SPECIFICATIONS

Block Sheave Sheave Pin Line Weight Safe Working


Number Size (in.) Size (in.) Size (in.) (lbs.) Load✲ (lbs.)
A-4 4 x 1-3/8 1-1/4 3/8 9 10,000
A-6 6 x 1-1/8 1-1/2 3/8 - 1/2 17 14,000
Bearing
Bronze

A-8 8 x 1-1/8 1-1/2 1/2 - 5/8 29 16,000


A-10 10 x 1-1/4 1-1/2 5/8 - 3/4 34 16,000
A-12 12 x 1-3/8 1-15/16 3/4 - 7/8 51 27,000
A-4R 4 x 1-3/8 1 3/8 11 10,000
A-6R 6 x 1-1/8 1-1/4 3/8 - 1/2 17 13,000
Bearing
Roller

A-8R 8 x 1-1/8 1-1/4 1/2 - 5/8 29 13,000


A-10R 10 x 1-1/4 1-1/4 5/8 - 3/4 37 13,000
A-12R 12 x 1-3/8 1-1/2 3/4 - 7/8 55 25,000
✲ Ultimate strength is 5 times safe working load.

DIMENSIONS (INCHES)

Sheave
A B C D E G H J K
Size
A-4 & A-4R 7-3/4 3-1/2 1-1/8 1-1/2 1-1/4 3-1/2 7/8 7/8 4-1/2
A-6 & A-6R 10-1/2 4 7/8 1-1/2 1-1/2 4-1/2 1 1 6-1/2
A-8 & A-8R 14-1/2 4 1 1-1/2 1-3/4 6 1-1/4 1-1/4 9
A-10 & A-10R 16-1/2 4 1 1-1/2 1-3/4 6-1/2 1-1/4 1-1/4 11
A-12 & A-12R 19-3/4 6-1/4 1 1-3/4 2-1/4 6-1/2 1-1/2 1-1/2 12-1/2

MANGANESE LONG-LIFE SHEAVES

P. O. Box 280
Hubbard, OR 97032
Tel: (503) 651-3175
An Ulven Company (800) 547-8211
Manufacturer of Skookum Blocks, Skookum Alloy Shackles, Fax: (503) 651-3409
and Custom-Designed Marine Products E-mail: skookum@ulvencompanies.com
Also available: Balanced Head Fairleads, Vertical & Horizontal Deck Lead Sheaves Web: www.skookumco.com
coopertools0008 4/23/06 5:16 PM Page 0008

8-06

DROP SIDE SNATCH BLOCKS


• Steel shells with steel sheaves
• Drop-forged fittings
• Galvanized
• For wire or manila rope
• 3 in. and 41/2 in. blocks have bronze self-lubricating bushings; 6 in. and larger
blocks have grooved bronze bushings with pressure greased lubrication
• Special feature: the bolt cannot be lost when the block is opened; connections
are easily interchangeable
4099 H 4099 Q
Specifications Fittings H V Q T NC BS
Block Size in. mm in. mm in. mm in. mm Cat. Cat. Cat. Cat. Cat. Cat.
Type No. No. No. No. No. No.
1
3 76 4 ⁄2 114 6 152 8 203 Wire
1 3” Self-lube 7339750 7339754 7339752 7339753 7339755 7332500
Diameter Manila - - 1 25 1 ⁄2 38 - -
3 1/2”Bronze 7339760 7339764 7339762 7339763 7339765 7332510
3 1 3 3
Rope Wire ⁄8 10 ⁄2 13 ⁄4 19 ⁄4 19 6”Bronze PL 7339790 7339794 7339792 7339793 7339795 7332520
Sheave Size 8”Bronze PL 7339830 7339834 7339832 7339833 7339835 -
1
O.D. 3 76 4 ⁄2 114 6 152 8 203 Note: These items are made to order.
3 1 1
Center Pin Dia. ⁄4 19 1 25 1 ⁄2 38 1 ⁄2 38
Weight lb kg lb kg lb kg lb kg
w/Connection 5 2 12 5 26 12 34 15 Connection Types
w/o Connection 3 1 6 3 15 7 22 10 "H" - Hook, no latch "T" - Oblong swivel eye
Working ton kg ton kg ton kg ton kg "V" - Hook, with latch "NC" - No connection
Load Limit 2 1814 4 3629 8 7258 8 7258 "Q" - Screw pin anchor shackle "BS" - Bullard style
Working Loads are Resultant Working Loads.

FISHERMAN’S GALVANIZED BLOCKS


Lobster, 6151 Try Net, 6150T
• Forged steel swivel eye
• Manila rope sheave with pressure • Hardened steel sheave for wear resistance
greased lubrication sheave pin • Bronze bushing with pressure greased
• Latched swivel hook is drop forged lubrication
• Working load limit 500 lb.
Cat. Working Load Limit Weight
Cat. Sheave Size Weight No. ton kg lb kg
No. in. mm lb kg Connection 7399058 3 2722 19 9
3 3
7381301 3 x 1 ⁄8 x ⁄4 76 x 35 x 19 5 2 Hook 7399158 5 4536 22 10

Purse Seine, 6153 Tuna, 6191H


• Forged steel shells • Steel sheaves with bronze bushings
• Bronze self-lubricating bushings, with pressure greased lubrication
galvanized • 25 inches long overall
• For manila rope • For 5/8 in. wire rope
• 8 in. diameter sheave

Cat. Sheave Size Rope Dia. Weight Cat. Working Load Limit Weight
No. in. mm in. mm lb kg No. ton kg lb kg
3 5 3
7381101 3 x ⁄4 x 3⁄8 76 x 19 x 10 ⁄8 16 3 ⁄4 2 7399079 15 13608 77 35

DO NOT EXCEED THE WORKING LOAD LIMIT.

One of the largest inventories of marine equipment and supplies


in the United States – ask for our FREE illustrated catalog.
WASHINGTON CHAIN & SUPPLY, INC.
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124
Phone: (206) 623-8500 • FAX: (206) 621-9834 • E-mail: info@wachain.com
VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
CM3052 4/23/06 5:17 PM Page 0002

9-06

COLUMBUS McKINNON CORP.


CHAIN SHACKLES – Carbon Steel
• All shackle pins are forged from alloy steel, heat treated and tempered to give greater strength.
• All shackles are marked with size (inches and millimeters) and working load limit in tons.
• Ultimate strength equals 5 times working load limit.
Proof load equals 2.2 times working load limit.
• These shackles meet requirements of
Federal Specification RR-C-271D Amendment 1.
• Galvanized per ASTM A153.
• All bolt, nut & cotter shackles have
thread protected ends.

Screw pin type Round pin type Bolt & nut type

Size Working load limit* Product Product Product


(in.) (tons†) code code code
1 1
⁄4 ⁄2 MC746G MC546G MC946G
5 3
⁄16 ⁄4 MC747G MC547G MC947G
3
⁄8 1 MC748G MC548G MC948G
7
⁄16 11⁄2 MC749G MC549G MC949G
1
⁄2 2 MC750G MC550G MC950G
5
⁄8 31⁄4 MC751G MC551G MC951G
3
⁄4 43⁄4 MC752G MC552G MC952G
7
⁄8 61⁄2 MC753G MC553G MC953G
1 81⁄2 MC754G MC554G MC954G
11⁄8 91⁄2 MC755G MC555G MC955G
11⁄4 12 MC756G MC556G MC956G
13⁄8 131⁄2 MC766G MC566G MC966G
11⁄2 17 MC757G MC557G MC957G
15⁄8 20 MC785G MC585G MC985G
13⁄4 25 MC777G MC577G MC977G
2 35 M758G M558G M958G

Ton = 2,000 lbs.

Dimensions (inches) apply to all styles Dia. of Width between Inside Outside Approx.
pin eyes length dia. of eye weight each
of chain shackles Size P W L R (max.) (lbs.)
1 5 15
⁄4 ⁄16 ⁄32 11⁄8 7
⁄8 .12
5 3 17
⁄16 ⁄8 ⁄32 11⁄4 1 .20
3 7 21
⁄8 ⁄16 ⁄32 17⁄16 11⁄8 .30
7 1 3
⁄16 ⁄2 ⁄4 111⁄16 11⁄4 .50
1 5 13
⁄2 ⁄8 ⁄16 17⁄8 13⁄8 .75
5 3
⁄8 ⁄4 11⁄16 23⁄8 17⁄8 1.3
3 7
⁄4 ⁄8 11⁄4 213⁄16 21⁄8 2.3
7
⁄8 1 17⁄16 35⁄16 23⁄8 3.5
1 11⁄8 111⁄16 33⁄4 25⁄8 5.0
11⁄8 11⁄4 113⁄16 41⁄4 27⁄8 7.0
11⁄4 13⁄8 21⁄32 411⁄16 31⁄4 9.5
13⁄8 11⁄2 21⁄4 51⁄4 31⁄2 12.5
11⁄2 15⁄8 23⁄8 53⁄4 33⁄4 17.2
15⁄8 13⁄4 25⁄8 61⁄4 41⁄8 23.5
13⁄4 2 27⁄8 7 41⁄2 27.7
2 21⁄4 31⁄4 73⁄4 51⁄4 39.0

*To avoid injury, do not exceed working load limit.

One of the largest inventories of marine equipment and supplies


in the United States – ask for our FREE illustrated catalog.
WASHINGTON CHAIN & SUPPLY, INC.
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124
Phone: (206) 623-8500 • FAX: (206) 621-9834 • E-mail: info@wachain.com
VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
CM3050 4/23/06 5:18 PM Page 0002

10-06

COLUMBUS McKINNON CORP.


ANCHOR SHACKLES – Carbon Steel
• All shackle pins are forged from alloy steel, heat treated and tempered to give greater strength.
• All shackles are marked with size (inches and millimeters) and working load limit in tons.
• Ultimate strength equals 5 times working
load limit. Proof load equals 2.2 times working
load limit.
• These shackles meet requirements of Federal
Specification RR-C-271D Amendment 1.
• Galvanized per ASTM A153.
• All bolt, nut & cotter shackles have thread
protected ends. Screw pin type Round pin type Bolt & nut type

Size Working load limit* Product Product Product


(in.) (tons†) code code code
3 1
⁄16 ⁄3 MC645G MC345G —
1 1
⁄4 ⁄2 MC646G MC346G MC846G
5 3
⁄16 ⁄4 MC647G MC347G MC847G
3
⁄8 1 MC648G MC348G MC848G
7
⁄16 11⁄2 MC649G MC349G MC849G
1
⁄2 2 MC650G MC350G MC850G
5
⁄8 31⁄4 MC651G MC351G MC851G
3
⁄4 43⁄4 MC652G MC352G MC852G
7
⁄8 61⁄2 MC653G MC353G MC853G
1 81⁄2 MC654G MC354G MC854G
11⁄8 91⁄2 MC655G MC355G MC855G
11⁄4 12 MC656G MC356G MC856G
13⁄8 131⁄2 MC666G MC366G MC866G
11⁄2 17 MC657G MC357G MC857G
15⁄8 20 MC685G MC385G MC885G
13⁄4 25 MC677G MC377G MC877G
2 35 M658G M358G M858G
21⁄2 55 — — MC860G
3 85 — — MC862G
31⁄2 120 — — MC864G

Ton = 2,000 lbs.
Dia. of Width between Inside Inside width Outside dia. Approx.
pin eyes length at bow of eye weight each
Size P W L B (min.) R (max.) (lbs.)
3 1 3 7 5 5
Dimensions (inches) apply to all styles ⁄16 ⁄4 ⁄8 ⁄8 ⁄8 ⁄8 .06
1 5 15
of anchor shackles ⁄4 ⁄16 ⁄32 11⁄8 3
⁄4 7
⁄8 .12
5 3 17
⁄16 ⁄8 ⁄32 11⁄4 13
⁄16 1 .20
3 7 21
⁄8 ⁄16 ⁄32 17⁄16 15
⁄16 11⁄8 .30
7 1 3
⁄16 ⁄2 ⁄4 111⁄16 11⁄16 11⁄4 .50
1 5 13
⁄2 ⁄8 ⁄16 17⁄8 13⁄16 13⁄8 .75
5 3
⁄8 ⁄4 11⁄16 2 3⁄8 11⁄2 17⁄8 1.3
3 7
⁄4 ⁄8 11⁄4 2 13⁄16 13⁄4 21⁄8 2.3
7
⁄8 1 17⁄16 3 5⁄16 2 23⁄8 3.5
1 11⁄8 111⁄16 33⁄4 25⁄16 25⁄8 5.0
11⁄8 11⁄4 113⁄16 41⁄4 2 5⁄8 27⁄8 7.0
11⁄4 13⁄8 21⁄32 411⁄16 2 7⁄8 31⁄4 9.5
13⁄8 11⁄2 21⁄4 51⁄4 31⁄4 31⁄2 12.5
11⁄2 15⁄8 23⁄8 53⁄4 3 3⁄8 33⁄4 17.2
15⁄8 13⁄4 25⁄8 61⁄4 4 41⁄8 23.5
13⁄4 2 27⁄8 7 41⁄2 41⁄2 27.7
2 21⁄4 31⁄4 7 3⁄4 51⁄4 51⁄4 39.0
21⁄2 23⁄4 41⁄4 101⁄2 63⁄4 61⁄4 90.0
3 31⁄4 5 13 73⁄8 63⁄4 137.0
*To avoid injury, do not exceed working load limit. 31⁄2 33⁄4 53⁄4 15 9 81⁄2 242.0

AVAILABLE THROUGH
WUENSCH SALES CO. (see page 1405)
HOUSTON: 800-607-9543 • Fax: 877-921-3194
E-mail: sales@wuenschsales.com
Web: www.wuenschsales.com
CM3051 4/23/06 5:19 PM Page 0002

11-06

COLUMBUS McKINNON CORP.


ANCHOR SHACKLES – Alloy Steel
• All shackle bodies and pins are forged from alloy steel, heat treated and tempered to give greater strength and abrasion resistance.
• All shackles are marked with size (inches and millimeters) and working load limit in tons.
• The galvanized shackles meet all requirements of Federal Specification RR-C-271D Amendment 1 except as noted.
• Ultimate strength equals 5 times working load limit.
Proof load equals 2.2 times working load limit.
• When ordering, specify galvanized (G) or
painted (P).
• Galvanized per ASTM A153.
• Painted shackles are orange.
• Built-in Distortion Detectors (3⁄8" – 2").
• All bolt, nut & cotter shackles have
thread protected ends and are
100% proof tested. Screw pin type Round pin type Bolt & nut type

Size Working load limit* Product code Product code Working load limit* Product code
(in.) (tons†) Galvanized Painted Galvanized Painted (tons†) Galvanized Painted
3
⁄8 2 M648AG M648AP — — 2 M848AG M848AP
7
⁄16 25⁄8 M649AG M649AP — — 25⁄8 M849AG M849AP
1
⁄2 31⁄3 M650AG M650AP M350AG M350AP 31⁄3 M850AG M850AP
5
⁄8 5 M651AG M651AP M351AG M351AP 5 M851AG M851AP
3
⁄4 7 M652AG M652AP M352AG M352AP 7 M852AG M852AP
7
⁄8 91⁄2 M653AG M653AP M353AG M353AP 91⁄2 M853AG M853AP
1 121⁄2 M654AG M654AP M354AG M354AP 121⁄2 M854AG M854AP
11⁄8 15 M655AG M655AP M355AG M355AP 15 M855AG M855AP
11⁄4 18 M656AG M656AP M356AG M356AP 8 M856AG M856AP
13⁄8 21 M666AG M666AP M366AG M366AP 21 M866AG M866AP
11⁄2 25 M657AG** M657AP** M357AG** M357AP** 30 M857AG M857AP
15⁄8 29 M685AG** M685AP** M385AG** M385AP** 35 M885AG M885AP
13⁄4 34 M677AG** M677AP** M377AG** M377AP** 40 M877AG M877AP
2 43 M658AG** M658AP** M358AG** M358AP** 50 M858AG M858AP
21⁄2 — — — — — 80 M860AG** —
3 — — — — — 110 MC862AG —
31⁄2 — — — — — 140 M864AG** —

Ton = 2,000 lbs. (3⁄8" – 2"), 2,200 lbs. (2-1⁄2" – 3-1⁄2")
** These shackles do not meet Federal Specification RR-C-271D
Amendment 1. Dia. of Width between Inside Inside width Outside dia. Approx.
pin eyes length at bow of eye weight each
Size P W L B (min.) R (max.) (lbs.)
Dimensions (inches) apply to all styles 3
⁄8 7
⁄16
21
⁄32 17⁄16 15
⁄16 11⁄8 .30
of anchor shackles 7
⁄16 1
⁄2
3
⁄4 111⁄16 1
1 ⁄16 11⁄4 .50
1 5 13
⁄2 ⁄8 ⁄16 17⁄8 13⁄16 13⁄8 .75
5 3
⁄8 ⁄4 11⁄16 23⁄8 11⁄2 17⁄8 1.3
3 7
⁄4 ⁄8 11⁄4 213⁄16 3
1 ⁄4 21⁄8 2.3
7
⁄8 1 17⁄16 35⁄16 2 23⁄8 3.5
1 11⁄8 111⁄16 33⁄4 25⁄16 25⁄8 5.0
11⁄8 11⁄4 113⁄16 41⁄4 5
2 ⁄8 27⁄8 7.0
11⁄4 13⁄8 21⁄32 411⁄16 7
2 ⁄8 31⁄4 9.5
13⁄8 11⁄2 21⁄4 51⁄4 31⁄4 31⁄2 12.5
11⁄2 15⁄8 23⁄8 53⁄4 33⁄8 33⁄4 17.2
15⁄8 13⁄4 25⁄8 61⁄4 4 41⁄8 23.5
13⁄4 2 27⁄8 7 41⁄2 41⁄2 27.7
2 21⁄4 31⁄4 73⁄4 1
5 ⁄4 51⁄4 39.0
21⁄2 23⁄4 41⁄4 101⁄2 3
6 ⁄4 61⁄4 90.0
3 31⁄4 5 13 73⁄8 63⁄4 137.0
31⁄2 33⁄4 53⁄4 15 9 81⁄2 242.0
*To avoid injury, do not exceed working load limit.

One of the largest inventories of marine equipment and supplies


in the United States – ask for our FREE illustrated catalog.
WASHINGTON CHAIN & SUPPLY, INC.
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124
Phone: (206) 623-8500 • FAX: (206) 621-9834 • E-mail: info@wachain.com
VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
CM3053 4/23/06 5:20 PM Page 0002

12-06

COLUMBUS McKINNON CORP.

TURNBUCKLES

• Hot dip galvanized


• Forged body
• Heat treated
• All meet ASTM F1145-92 Type 1 Grade 1, Eye and Eye Class D, Hook and Hook Class E, Hook and Eye Class F,
Jaw and Jaw Class G, Jaw and Eye Class H (Supersedes Federal Specification FF-T-7916).
• Do not exceed the working load limit.
• Inspect turnbuckles before use for bent components and worn threads. Do not use if body or end fitting is bent more
than 10° from axial center line. Do not use if threads are visibly worn or feel loose.
• Apply turnbuckle in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end
attachment threaded shanks.
• Apply load to center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes.
Weight each (lbs.)
Average overall
Thread Take with ends in Eye & Eye (EE)
dia. x up closed position Hook & Hook (HH)
(in.) Product code** (in.) Hook & Eye (HE) Jaw & Eye (JE) Jaw & Jaw (JJ)
1
⁄4 x 4 0404 81⁄4 0.3 0.3 0.4
5
⁄16 x 41⁄2 0504 99⁄16 0.5 0.5 0.6
3
⁄8 x 6 0606 117⁄8 0.8 0.9 0.9
1
⁄2 x 6 0806 135⁄16 1.5 1.7 1.8
1
⁄2 x 9 0809 165⁄16 1.9 2.0 2.1
1
⁄2 x 12 0812 195⁄16 2.3 2.4 2.4
5
⁄8 x 6 1006 151⁄2 2.5 2.8 3.0
5
⁄8 x 9 1009 181⁄2 3.3 3.5 3.7
5
⁄8 x 12 1012 211⁄2 3.8 4.0 4.2
3
⁄4 x 6 1206 17 3.9 4.3 4.6
3
⁄4 x 9 1209 20 4.8 5.1 5.4
3
⁄4 x 12 1212 23 5.4 5.7 6.0
3
⁄4 x 18 1218 29 7.0 7.3 7.7
7
⁄8 x 12 1412 245⁄8 7.4 7.9 8.4
7
⁄8 x 18 1418 305⁄8 9.6 10.2 10.7
1x6 1606 205⁄8 9.0 9.4 9.7
1 x 12 1612 265⁄8 11.2 11.6 11.9
1 x 18 1618 325⁄8 13.8 14.3 14.8
1 x 24 1624 385⁄8 17.1 17.6 18.2
**When ordering, add style of turnbuckle (EE, HH, JE, HE, JJ) after numerical code to make complete ordering code.

One of the largest inventories of marine equipment and supplies


in the United States – ask for our FREE illustrated catalog.
WASHINGTON CHAIN & SUPPLY, INC.
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124
Phone: (206) 623-8500 • FAX: (206) 621-9834 • E-mail: info@wachain.com
VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
CM3054 4/23/06 5:21 PM Page 0002

13-06

COLUMBUS McKINNON CORP.


TURNBUCKLE DIMENSIONS
HOOK Working
Dia. load
A limit Dimensions (inches)
(in.) (lbs.)* B C D E
1 1 13 29
⁄4 400 ⁄4 ⁄32 ⁄64 121⁄32
5 5 1 1
⁄16 700 ⁄16 ⁄2 ⁄2 131⁄32
3 3 39 9
⁄8 1,000 ⁄8 ⁄64 ⁄16 2 23⁄64
1 1 25 21
⁄2 1,500 ⁄2 ⁄32 ⁄32 215⁄16
5 5 27
⁄8 2,250 ⁄8 1 ⁄32 311⁄16
3 3
⁄4 3,000 ⁄4 113⁄64 63
⁄64 433⁄64
7 7
⁄8 4,000 ⁄8 13⁄8 11⁄8 5 3⁄16
1 5,000 1 117⁄32 11⁄4 5 27⁄32

EYE Working
Dia. load
A limit Dimensions (inches)
(in.) (lbs.)* B C D E
1 7 11 25
⁄4 500 ⁄32 ⁄32 ⁄32 125⁄32
5 9 7 15
⁄16 800 ⁄32 ⁄16 ⁄16 23⁄16
3 11 7
⁄8 1,200 ⁄32 ⁄32 11⁄8 29⁄16
1 7 23
⁄2 2,200 ⁄16 ⁄32 17⁄16 37⁄32
5 1 7
⁄8 3,500 ⁄2 ⁄8 13⁄4 37⁄8
3 5
⁄4 5,200 ⁄8 1 21⁄8 411⁄16
7 3
⁄8 7,200 ⁄4 11⁄4 23⁄8 51⁄4
7
1 10,000 ⁄8 17⁄16 3 63⁄8
JAW
Working
Dia. load
A limit Dimensions (inches)
(in.) (lbs.)* B C D E F G H
1 5 1 13 9 1
⁄4 500 ⁄8 ⁄4 ⁄32 ⁄32 ⁄2 15⁄8 5
⁄8
5 7 1 15 9 1 11
⁄16 800 ⁄8 ⁄4 ⁄32 ⁄32 ⁄2 2 ⁄16
3 7 5 1 5 19
⁄8 1,200 ⁄8 ⁄16 ⁄2 ⁄16 ⁄32 2 3⁄16 13
⁄16
1
⁄2 2,200 11⁄16 3
⁄8 5
⁄8 13
⁄32 3
⁄4 2 3⁄4 1
5
⁄8 3,500 15⁄16 1
⁄2 3
⁄4 1
⁄2 11⁄32 31⁄2 15⁄16
3
⁄4 5,200 11⁄2 5
⁄8 15
⁄16 9
⁄16 19⁄32 41⁄8 15⁄8
7
⁄8 7,200 13⁄4 3
⁄4 11⁄8 11
⁄16 115⁄32 427⁄32 17⁄8
1 10,000 21⁄16 7
⁄8 13⁄16 25
⁄32 121⁄32 517⁄32 21⁄8

*To avoid injury, do not exceed working load limit.

TURNBUCKLE LOCK NUTS


Size Right hand Left hand (lbs.)
(in.) nut part no. nut part no. 100
1
⁄4 3X845 3X845L .5
5
⁄16 3X846 3X846L .8
3
⁄8 3X847 3X847L 1.0
1
⁄2 3X849 3X849L 2.7
5
⁄8 3X850 3X850L 5.0
3
⁄4 3X851 3X851L 8.6
7
⁄8 3X852 3X852L 13.0
1 3X853 3X853L 19.5
11⁄4 3X855 3X855L 41.0
11⁄2 3X866 3X866L 70.0

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
CM3065 4/23/06 5:22 PM Page 0002

14-06

COLUMBUS McKINNON CORP.


LOAD BINDERS

Lever Type
Ratchet Type

RATCHET TYPE
Part Chain Grade & Size Working Load Handle Barrel Size OD Screw Diameter Weight
No. G30 G43 G70 Limit (WLL) Length Dia. x Length x Length Take Up Each
1 1
48364 ⁄4" ⁄4" 2,600 lbs 11" 15⁄16" x 6" 3
⁄4" x 6" 4" 5.4 lbs
7 mm 7 mm 12 kN 279 mm 33 x 156 mm 19 x 152 mm 102 mm 2.5 kg
3 3 5
⁄8" ⁄8" ⁄16" 5,400 lbs 12" 15⁄16" x 6" 3
⁄4" x 6" 8" 8.6 lbs
48810
10 mm 10 mm 8.7 mm 24 kN 305 mm 33 x 156 mm 19 x 152 mm 203 mm 3.9 kg
3 5
⁄8" ⁄16" 5,400 lbs 15" 11⁄2" x 10" 1" x 10" 8" 10.5 lbs
*B02026
10 mm 8.7 mm 24 kN 381 mm 38 x 254 mm 25 x 254 mm 203 mm 4.8 kg
3 3 3
⁄8" ⁄8" ⁄8" 7,100 lbs 14" 11⁄2" x 10" 1" x 10" 8" 13 lbs
48360
10 mm 10 mm 10 mm 32 kN 356 mm 38 x 254 mm 25 x 254 mm 203 mm 5.9 kg
3 3 5
⁄8" ⁄8" ⁄16" 5,400 lbs 14" 11⁄2" x 10" 1" x 10" 8" 12 lbs
48365
10 mm 10 mm 8.7 mm 24 kN 356 mm 38 x 254 mm 25 x 254 mm 203 mm 5.4 kg
1 1 3
⁄2" ⁄2" ⁄8" 9,200 lbs 14" 11⁄2" x 10" 1" x 10" 8" 13 lbs
48366
13 mm 13 mm 18 mm 41 kN 356 mm 38 x 254 mm 25 x 254 mm 203 mm 5.9 kg
1 3
⁄2" ⁄8" 9,200 lbs 15" 11⁄2" x 10" 1" x 10" 8" 11.7 lbs
*B02027
13 mm 18 mm 41 kN 381 mm 38 x 254 mm 25 x 254 mm 203 mm 5.3 kg
5 5 1
⁄8" ⁄8" ⁄2" 13,000 lbs 14" 11⁄2" x 10" 1" x 10" 8" 16 lbs
48367
16 mm 16 mm 13 mm 58 kN 356 mm 38 x 254 mm 25 x 254 mm 203 mm 7.3 kg
* Imported

LEVER TYPE
Part Chain Grade & Size Working Load Handle Working Weight
No. G30 G43 G70 G80 Limit (WLL) Take Up Load Length Each
1 1
⁄4" ⁄4" 2,600 lbs 3 3⁄4" 111⁄4" 3 lbs
48304
7 mm 7 mm 12 kN 95 mm 286 mm 1.4 kg
1 1
*C01025 ⁄4" ⁄4" 3,900 3" 111⁄2" 3.5 lbs
7 mm 7 mm 17 kN 76 mm 292 mm 1.6 kg
3 3 5
⁄8" ⁄8" ⁄16" 5,400 lbs 4 1⁄2" 16 1⁄8" 8.1
48305
10 mm 10 mm 8.7 mm 24 kN 14 mm 409 mm 3.7 kg
3 5
*C01026 ⁄8" ⁄16" 5,400 lbs 4" 16" 7.7 lbs
10 mm 8.7 mm 24 kN 102 mm 406 mm 3.5 kg
1 1 3
⁄2" ⁄2" ⁄8" 9,200 lbs 4 3⁄4" 16 5⁄8" 10.6 lbs
48406
13 mm 13 mm 18 mm 41 kN 121 mm 422 mm 4.8 kg
3 3 3 3
⁄8" ⁄8" ⁄8" ⁄8" 7,100 lbs 4 1⁄2" 16 5⁄8" 8.1 lbs
48769
10 mm 10 mm 10 mm 10 mm 32 kN 114 mm 422 mm 3.7 kg
* Imported

DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly
distorted or worn.

AVAILABLE THROUGH
WUENSCH SALES CO. (see page 1405)
HOUSTON: 800-607-9543 • Fax: 877-921-3194
E-mail: sales@wuenschsales.com
Web: www.wuenschsales.com
CM 3078 4/23/06 8:06 PM Page 0002

15-06

COLUMBUS McKINNON CORP.

LARGE EYE LATCH LOCK HOOKS


• Grade 80 alloy steel.
• For simplified rigging and secure load attachment.
• Recessed push button thumb release will not open
accidentally, even if chain slacks; eliminates danger of
an open hook snagging on a projection.
• Large Eye accepts wire rope thimbles.

Working
load Weight
Chain size limit Product Dimensions (inches) each
(in.) (mm) (lbs.)* code B D E G H I J K L M N O P V (lbs.)
9
⁄32 7 3,500 674531 2 3⁄16 3 7⁄16 13⁄8 6 11⁄16 1
⁄2 15
⁄16 13
⁄16 13⁄16 13⁄16 5 3⁄16 13⁄8 15⁄16 1 1
⁄2 1.28
3
⁄8 10 7,100 674532 2 13⁄16 4 1⁄16 13⁄4 8 11⁄32 11
⁄16 11⁄8 5
⁄8 17⁄16 17⁄16 6 1⁄2 13⁄4 119⁄32 19⁄64 11
⁄16 2.08
1
⁄2 13 12,000 674533 35⁄8 4 3⁄4 2 1⁄4 10 9⁄16 7
⁄8 11
1 ⁄16 3
1 ⁄8 17⁄8 17⁄8 8 9⁄32 2 3⁄16 121⁄32 13⁄8 7
⁄8 4.12
5
⁄8 - 3⁄4 16/20 28,300 674534 5 1⁄16 5 3⁄4 2 7⁄16 13 1⁄2 1 1⁄4 1
2 ⁄16 3
1 ⁄4 2 9⁄16 2 9⁄16 101⁄2 2 5⁄8 2 3⁄8 13⁄4 1 1⁄4 10.34

CLEVIS LATCH LOCK HOOKS


• Grade 80 alloy steel.
• Alloy steel, forged & heat treated.
• Rated for grade 80 alloy chain.
• Join directly to chain. No need for coupling links.
• Recessed push button release. Will not open accidentally,
even when chain goes slack.
• Smooth contour prevents hooks snagging.

Chain Working Weight


size load limit Product Dimensions (inches) each
(in.) (lbs.)* code B D E G I J K L M N O P W (lbs.)
9
⁄32 3,500 674535 1 23⁄64 3 7⁄16 15⁄8 15 9⁄32 15
⁄16 13
⁄16 21
⁄64 1 3 49⁄64 13⁄8 115⁄16 1 3
⁄8 1.5
3
⁄8 7,100 674536 113⁄16 41⁄16 15⁄8 6 3⁄4 11⁄8 5
⁄8 29
⁄64 127⁄64 4 51⁄64 13⁄4 119⁄32 9
1 ⁄64 17
⁄32 2.6
1
⁄2 12,000 674537 2 3⁄16 43⁄4 21⁄16 8 9⁄16 111⁄16 13⁄8 5
⁄8 143⁄64 6 5⁄64 2 3⁄16 2 21⁄32 13⁄8 21
⁄32 5.7
5
⁄8 18,100 674538 2 3⁄4 5 3⁄4 2 1⁄4 10 15⁄32 2 1⁄16 13⁄4 3
⁄4 2 1⁄8 725⁄64 25⁄8 2 3⁄8 13⁄4 7
⁄8 11.1

* To avoid injury, do not exceed working load limit.

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
CM 3055 4/23/06 8:07 PM Page 0002

16-06

COLUMBUS McKINNON CORP.


CLEVIS HOOKS
CLEVIS GRAB HOOKS
Grade 43 – Carbon Steel
Working Clear Zinc Approx.
Hook load finish plated weight
size limit Product Product Dimensions each
(in.) (lbs.)* code code W P H R L D (lbs.)
1 5 5 3
⁄4 2,600 M804L M804ZL ⁄16 ⁄16 ⁄8 2 33⁄8 115⁄16 .38
5 3 3 7
⁄16 3,900 M805L M805ZL ⁄8 ⁄8 ⁄16 23⁄8 329⁄32 21⁄4 .62
3 7 7 1
⁄8 5,400 M806L M806ZL ⁄16 ⁄16 ⁄2 211⁄16 41⁄2 211⁄16 .96
7 1 1 9
⁄16 7,200 M807L M807ZL ⁄2 ⁄2 ⁄16 3 51⁄32 3 1.46
1 19 9 21
⁄2 9,200 M808L M808ZL ⁄32 ⁄16 ⁄32 323⁄64 539⁄64 35⁄16 2.02
5 3 11 25
⁄8 13,000 M810L M810ZL ⁄4 ⁄16 ⁄32 4 67⁄8 41⁄4 3.76
3 7 3 15
⁄4 20,200 M812 M812Z ⁄8 ⁄4 ⁄16 419⁄32 8 51⁄4 6.41
Applications: Designed for use with welded chain G30 or G43.

Grade 80 – Alloy Steel


Chain Working Approx. Standard
size load limit Product Dimensions (inches) weight industrial
(in.) (lbs.)*† code W D H L P R each (lbs.) pack
1 5
⁄4 3,500 M804A ⁄16 115⁄16 3
⁄8 31⁄4 21
⁄64 17⁄8 .38 30
5 3
⁄16 4,500 M805A ⁄8 29⁄32 7
⁄16 331⁄32 25
⁄64 2 3⁄8 .62 30
3 29
⁄8 7,100 M806A ⁄64 25⁄8 1
⁄2 41⁄2 1
⁄2 2 5⁄8 .96 30
7 1 9
⁄16 6,900 M807A** ⁄2 3 ⁄16 51⁄32 1
⁄2 3 1.46 20
1 19
⁄2 12,000 M808A ⁄32 37⁄16 21
⁄32 523⁄32 19
⁄32 35⁄16 2.02 10
5 3
⁄8 18,100 M810A ⁄4 45⁄16 25
⁄32 67⁄8 3
⁄4 315⁄16 3.75 10
**Grade 63.

Alloy clevis hooks develop the mechanical properties of grade 80 & 63 as stated, but are not recommended for overhead lifting
sling applications.

CLEVIS SLIP HOOKS


Grade 43 – Carbon Steel

Working Clear Zinc Approx.


Hook load finish plated weight
size limit Product Product Dimensions each
(in.) (lbs.)* code code W P H R L G D (lbs.)
1 5 5 15
⁄4 2,600 M904L M904ZL ⁄16 ⁄16 ⁄16 25⁄16 311⁄16 13
⁄16 25⁄8 .47
5 3 3
⁄16 3,900 M905L M905ZL ⁄8 ⁄8 11⁄16 29⁄16 43⁄16 15
⁄16 31⁄16 .73
3 7 7
⁄8 5,400 M906L M906ZL ⁄16 ⁄16 11⁄4 3 47⁄8 11⁄8 31⁄2 1.16
7 1 1
⁄16 7,200 M907L M907ZL ⁄2 ⁄2 19⁄16 31⁄2 511⁄16 13⁄8 415⁄16 1.95
1 19 9
⁄2 9,200 M908L M908ZL ⁄32 ⁄16 13⁄4 15
3 ⁄16 63⁄8 11⁄2 47⁄8 2.55
5 3 11
⁄8 13,000 M910 M910Z ⁄4 ⁄16 2 43⁄4 79⁄16 111⁄16 511⁄16 4.24
Applications: Designed for use with welded chain G30 or G43.

Grade 63 – Alloy Steel


Chain Working Approx. Standard
size load limit Product Dimensions (inches) weight industrial
(in.) (lbs.)*† code W D H L P R G each (lbs.) pack
1 5
⁄4 2,750 M904A ⁄16 25⁄8 15
⁄16 311⁄16 11
⁄32 25⁄16 13
⁄16 .47 20
5 3
⁄16 3,600 M905A ⁄8 31⁄16 11⁄16 43⁄16 25
⁄64 29⁄16 15
⁄16 .73 20
3 15
⁄8 5,500 M906A ⁄32 31⁄2 11⁄4 47⁄8 1
⁄2 3 11⁄8 1.16 20
7 1
⁄16 6,900 M907A ⁄2 45⁄16 19⁄16 511⁄16 1
⁄2 31⁄2 13⁄8 1.95 10
1 19
⁄2 9,400 M908A ⁄32 47⁄8 13⁄4 63⁄8 19
⁄32 315⁄16 11⁄2 2.55 10
5 3
⁄8 14,200 M910A ⁄4 511⁄16 2 79⁄16 3
⁄4 43⁄4 111⁄16 4.24 5

Alloy clevis hooks develop the mechanical properties of grade 80 & 63 as stated, but are not recommended for overhead lifting
sling applications.

*WARNING Improper use or care of hooks can result in bodily injury or property damage. To avoid injury or property damage, always observe the following when using
hooks: • Do not exceed working load limit. • Use only alloy hooks for overhead lifting. • Do not tip load or use in any manner for which the hook was not intended. • Do not
shock or dynamic load. • Do not apply load to hook latches. Latches are to retain slack slings and chain only.

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
CM 3056 4/23/06 8:08 PM Page 0002

17-06

COLUMBUS McKINNON CORP.


EYE SLIP HOOKS
Grade 30 – Carbon Steel – for use with grade 30 proof coil chain
Working Clear Zinc Approx.
Chain load finish plated weight Standard
size limit Product Product Dimensions (inches) each industrial
(in.) (lbs.)* code code W D H L R G (lbs.) pack
1 17
⁄4 1,300 M304RL M304ZL ⁄32 29⁄16 15
⁄16 3 19⁄32 215⁄32 13
⁄16 .42 20
5 5
⁄16 1,900 M305RL M305ZL ⁄8 31⁄16 11⁄16 43⁄32 2 25⁄32 15
⁄16 .58 20
3 25
⁄8 2,650 M306RL M306ZL ⁄32 31⁄2 11⁄4 427⁄32 35⁄16 11⁄8 1.00 20
7 13
⁄16 3,700 M307RL M307ZL ⁄16 421⁄64 19⁄16 519⁄32 33⁄4 13⁄8 1.50 10
1 15
⁄2 4,500 M308RL M308ZL ⁄16 429⁄32 13⁄4 611⁄32 45⁄16 11⁄2 2.50 10
5
⁄8 6,900 M310R M310ZL 13⁄16 55⁄8 2 73⁄4 55⁄16 21⁄4 3.70 5
3
⁄4 10,600 D74792 — 11⁄4 71⁄8 1
2 ⁄4 9 513⁄16 23⁄8 6.00 Bulk
Grade 43 – Carbon Steel – for use with grade 43 high test chain
Working Clear Zinc Approx.
Chain load finish plated weight Standard
size limit Product Product Dimensions (inches) each industrial
(in.) (lbs.)* code code W D H L R G (lbs.) pack
1 17
⁄4 2,600 M304H M304HZ ⁄32 29⁄16 15
⁄16 319⁄32 215⁄32 13
⁄16 .42 20
5 5
⁄16 3,900 M305H M305HZ ⁄8 31⁄16 11⁄16 43⁄32 225⁄32 15
⁄16 .58 20
3 25
⁄8 5,400 M306H M306HZ ⁄32 31⁄2 1
1 ⁄4 427⁄32 35⁄16 11⁄8 1.00 20
7 13
⁄16 7,200 M307H M307HZ ⁄16 421⁄64 19⁄16 519⁄32 33⁄4 13⁄8 1.50 10
1 15
⁄2 9,200 M308H M308HZ ⁄16 429⁄32 3
1 ⁄4 611⁄32 45⁄16 11⁄2 2.50 10
5
⁄8 13,000 M310H M310HZ 13⁄16 55⁄8 2 73⁄4 55⁄16 21⁄4 3.70 5
3
⁄4 11,500 — 75793 1.53 6.14 2.06 8.60 6.5 115⁄16 6.50 5

Grades 63 & 70 – Alloy Steel


Hot forged and heat treated
Working Latch Approx.
Chain load limit Hook kit** weight Standard
size (lbs.) Product Product Dimensions (inches) each industrial
(in.) Grade 63 Grade 70 code code W D H L R G (lbs.) pack
1 17
⁄4 2,750 3,150 M6304 4X404 ⁄32 211⁄16 29
⁄32 33⁄4 21⁄2 7
⁄8 .45 20
5 5
⁄16 3,600 4,700 M6305 4X405 ⁄8 33⁄16 13
⁄64 413⁄32 3 11⁄32 .58 20
3 25
⁄8 5,500 6,600 M6306 4X406 ⁄32 33⁄4 17⁄32 53⁄16 31⁄2 11⁄4 .98 20
7 13
⁄16 7,100 8,750 M6307 4X410 ⁄16 421⁄64 7
1 ⁄16 53⁄4 329⁄32 13⁄8 1.50 10
1 15
⁄2 9,400 — M308A† — ⁄16 429⁄32 3
1 ⁄4 611⁄32 45⁄16 11⁄2 2.50 10
5
⁄8 14,200 — M310A† — 13⁄16 55⁄8 2 73⁄4 55⁄16 21⁄4 3.10 5
**Stainless steel latch kit available. Latch is designed to retain such items as slings and chains under slack conditions. The latch is not intended to support the load.

No latch hole.

SNAP HOOK
• Heat treated forged steel.
• Stainless steel latches, springs, bolts and nuts.
• Ultimate load is 4 times the working load limit.
Working Approx.
Hook load weight
size limit Product Dimensions (inches) each
(in.) (lbs.)* code A B C D E F L R (lbs.)
7 1 3 3
⁄16 750 495116 ⁄4 ⁄4 ⁄4 .44 21⁄4 3
⁄4 315⁄16 31⁄4 .25
*To avoid injury, do not exceed working load limit.

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
CM 3057 4/23/06 8:09 PM Page 0002

18-06

COLUMBUS McKINNON CORP.


EYE GRAB HOOKS
Grade 30 – Carbon Steel – for use with grade 30 proof coil chain
Working Clear Zinc Approx.
Chain load finish plated weight Standard
size limit Product Product Dimensions (inches) each industrial
(in.) (lbs.)* code code W D H L R (lbs.) pack
1 17 3
⁄4 1,300 M204RL M204ZL ⁄32 2 ⁄8 33⁄64 115⁄16 .28 30
5 5
⁄16 1,900 M205RL M205ZL ⁄8 211⁄32 7
⁄16 35⁄8 2 3⁄8 .54 30
3 25
⁄8 2,650 M206RL M206ZL ⁄32 211⁄16 1
⁄2 49⁄32 213⁄16 .80 30
7 13
⁄16 3,700 M207RL M207ZL ⁄16 33⁄64 37
⁄64 4 55⁄64 311⁄64 1.32 20
1 15 25 21
⁄2 4,500 M208RL M208ZL ⁄16 3 ⁄64 ⁄32 5 33⁄64 35⁄8 1.74 10
5
⁄8 6,900 M210RL M210ZL 11⁄16 4 5⁄16 25
⁄32 615⁄16 433⁄64 3.44 10
3
⁄4 10,600 M212R M212Z 13⁄8 7
5 ⁄32 15
⁄16 85⁄16 53⁄8 6.10 Bulk

Grade 43 – Carbon Steel – for use with grade 43 high test chain
Working Clear Zinc Approx.
Chain load finish plated weight Standard
size limit Product Product Dimensions (inches) each industrial
(in.) (lbs.)* code code W D H L R (lbs.) pack
1 17 3
⁄4 2,600 M204H M204HZ ⁄32 2 ⁄8 33⁄64 115⁄16 .28 30
5 5
⁄16 3,900 M205H M205HZ ⁄8 211⁄32 7
⁄16 35⁄8 2 3⁄8 .54 30
3 25 11 1
⁄8 5,400 M206H M206HZ ⁄32 2 ⁄16 ⁄2 49⁄32 213⁄16 .80 30
7 13 3 37
⁄16 7,200 M207H M207HZ ⁄16 3 ⁄64 ⁄64 4 55⁄64 311⁄64 1.32 20
1 15
⁄2 9,200 M208H M208HZ ⁄16 325⁄64 21
⁄32 5 33⁄64 35⁄8 1.74 10
5
⁄8 13,000 M210H M210HZ 11⁄16 5
4 ⁄16 25
⁄32 615⁄16 433⁄64 3.44 10
3
⁄4 20,200 M212H M212HZ 13⁄8 5 7⁄32 15
⁄16 85⁄16 53⁄8 6.10 Bulk

Grade 80 – Alloy Steel – for use with grade 80 alloy chain (except M207A)
• Extra deep throat.
• Painted orange.
• Embossed with chain grade.
Working Approx.
Chain load weight Standard
size limit Product Dimensions (inches) each industrial
(in.) (lbs.)* code W D H L R (lbs.) pack
1 17 3
⁄4 3,500 M204A ⁄32 2 ⁄8 3 7⁄32 2 1⁄32 .44 30
5 5
⁄16 4,500 M205A ⁄8 213⁄32 7
⁄16 3 25⁄32 2 13⁄32 .69 30
3 25
⁄8 7,100 M206A ⁄32 211⁄16 1
⁄2 411⁄32 2 3⁄4 1.00 30
7 13
⁄16 6,900 M207A** ⁄16 33⁄64 37
⁄64 4 55⁄64 311⁄64 1.20 20
1 15
⁄2 12,000 M208A ⁄16 31⁄4 21
⁄32 5 9⁄16 39⁄16 2.31 10
5
⁄8 18,100 M210A 11⁄16 411⁄32 25
⁄32 71⁄16 49⁄16 4.00 10
**Grade 63

SORTING HOOK
A
• Forged from special bar quality steel – • Long tapered point designed for easy grab in rings,
heat treated pear links, eyebolts or lifting holes.
B C
• Special construction for efficient handling of flat • Painted orange.
plates or large cylindrical shapes. • Design ultimate strength is 5 times working load limit. I
• Specify when ordering hook with handle (H). D I
Working Working
load load limit Approx. G H
limit at bottom weight
at tip of hook Product Dimensions (inches) each F
(tons)* (tons)* code A B C D E F G H I (lbs.)
2 71⁄2 M129 3 17⁄16 25
⁄32 711⁄32 33⁄4 19⁄32 11⁄4 41⁄8 103⁄32 6.8
2 71⁄2 M129H 3 17⁄16 25
⁄32 711⁄32 33⁄4 19⁄32 11⁄4 41⁄8 103⁄32 7
* To avoid injury, do not exceed working load limit. Use only alloy chain and attachments for overhead lifting.

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
CM 3058 4/23/06 8:10 PM Page 0002

19-06

COLUMBUS McKINNON CORP.


RIGGING EYE HOOK AND LATCH
• Hook and latch assemblies furnished separately.
• All eye hooks are furnished pre-drilled for latches.
• Alloy steel hooks painted orange.
• Carbon steel hooks have a clear protective finish to
resist rust (“C” suffix).
• Carbon steel eye hooks for slings and rigging are
available hot dip galvanized. Use suffix “G” when ordering.
Carbon Steel Alloy Steel
Latch Approx.
Working Hook Working Hook kit** weight
load Product load Product Product Dimensions (inches) each
limit* code limit* code code A B C D E G H K L M R T O (lbs.)
3
⁄4 M404C 1 M404A 4X404 1.500 .750 .375 3.000 1.000 .750 .875 .562 4.375 1.250 3.125 .812 .875 .63
1 M405C 11⁄2 M405A 4X405 1.750 .875 .438 3.188 1.078 .844 .938 .625 4.938 1.375 3.656 .938 .938 .85
11⁄2 M406C 2 M406A 4X406 2.125 1.125 .500 3.625 1.125 1.000 1.156 .750 5.594 1.438 4.094 1.000 1.000 1.38
2 M407C — — 4X406 2.500 1.250 .625 4.094 1.250 1.125 1.312 .844 6.438 1.625 4.688 1.188 1.125 1.92
— — 3 M407A 4X406 2.500 1.250 .625 4.217 1.250 1.274 1.431 .940 6.567 1.625 4.668 1.188 1.125 1.92
3 M410C 5 M410A 4X410 3.063 1.563 .750 5.063 1.531 1.438 1.625 1.125 7.969 2.000 5.781 1.438 1.375 3.70
5 M412C 7 M412A 4X412 3.875 2.000 .938 6.500 1.969 1.875 2.063 1.375 10.125 2.625 7.313 1.875 1.688 7.28
71⁄2 M414C — — 4X414 4.685 2.441 1.122 7.598 2.244 2.480 2.606 1.850 12.500 3.000 9.055 2.380 2.047 15.40
— — 11 M414A 4X414 4.688 2.438 1.125 7.688 2.250 2.250 2.625 1.900 12.434 3.000 9.034 2.297 2.053 15.40
11 M416C 15 M416A 4X416 5.354 2.835 1.268 8.700 2.480 2.756 2.917 2.165 13.984 3.307 10.039 2.380 2.244 22.20
15 M418C 22 M418A 4X418 6.614 3.504 1.555 11.102 3.346 3.228 3.516 2.598 17.126 3.937 12.480 2.500 2.992 37.60
**Stainless steel latch kit available. Latch is designed to retain such items as slings and chains under slack conditions. The latch is not intended to support the load.

* Working Load Limits shown in metric tons (2204 lbs.).


To avoid injury, do not exceed working load limit.

SWIVEL HOOKS
• Carbon or alloy steel
• Design factor 5-1
• Built in distortion detectors
• Pre-drilled for 1300 series latch kits

Dimensions (inches)
P/N Alloy P/N Carbon A B C D E F G H I L R S T O
M3402A M3402C 2.00 1.11 1.25 3.15 1.00 1.25 .87 1.00 .63 5.88 4.63 .38 .81 .88
M3403A M3403C 2.50 1.38 1.50 3.47 1.08 1.38 .96 1.11 .72 6.89 5.44 .50 .94 .94
M3404A M3404C 3.00 1.65 1.75 3.78 1.13 1.50 1.04 1.21 .86 7.93 6.25 .63 1.00 1.00
M3405A M3405C 3.00 1.65 1.75 4.22 1.25 1.63 1.27 1.43 .94 8.25 6.49 .63 1.19 1.13
M3407A M3407C 3.50 1.77 2.00 5.07 1.53 2.00 1.44 1.62 1.15 9.72 7.53 .75 1.44 1.38
M3409A M3409C 4.75 2.39 2.75 6.30 1.97 2.50 1.74 2.01 1.51 12.41 9.60 1.00 1.88 1.69
M3411A M3411C 5.50 2.55 3.25 7.69 2.25 3.00 2.25 2.63 1.90 15.43 12.06 1.13 2.31 1.94
M3415A M3415C 6.00 2.47 3.50 8.37 2.50 3.25 2.59 2.94 2.19 15.79 11.95 1.25 2.62 2.23
M3422A M3422C 7.75 3.82 4.75 10.19 3.30 4.25 3.00 3.50 2.69 21.18 16.68 1.50 2.74 3.05
Carbon Steel Alloy Steel
Working Load Limit* Without Latch Wt. (lbs) With Latch Wt. (lbs) Working Load Limit* Without Latch Wt. (lbs) With Latch Wt. (lbs)
.75 M3402C 1 M3502C 1.5 1 M3402A 1 M3502A 1.5
1 M3403C 1.6 M3503C 2.1 1.5 M3403A 1.5 M3503A 2
1.5 M3404C 2.5 M3504C 3 2 M3404A 2.6 M3504A 3
2 M3405C 3.2 M3505C 3.5 3 M3405A 3.1 M3505A 3.5
3 M3407C 5.4 M3507C 7.5 5 M3407A 5.3 M3507A 7.5
5 M3409C 10.6 M3509C 14 7 M3409A 10.4 M3509A 14
7 M3411C 16.3 M3511C 19 11 M3411A 16.25 M3511A 19
10 M3415C 26.8 M3515C 31 15 M3415A 26.75 M3515A 31
15 M3422C 51.8 M3522C 56 22 M3422A 51.80 M3522A 56

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
24 4/23/06 8:11 PM Page 26

20-06

COLUMBUS MCKINNON CORP.

BELOW-THE-HOOK LIFTING DEVICES


Multi-Rail Lifting Clamps Type MR
Working
These clamps facilitate fast bulk transfer of rail sections from rail Load Limit Product No. Weight
stacks to flat beds or ships holds. (lbs.) Code Rails (lbs.)
The clamps retain the rails rigidly in a flange to flange position, 11,000 MR3 3 185.5
thus eliminating the necessity of levering rails into position when 11,000 MR4 4 238
slowing or fastening down on flat beds. 11,000 MR5 5 291
The clamps are normally used in pairs and have automatic double locks. 13,200 MR6 6 344
Hard rubber linings on the contacting parts prevent marking or 15,400 MR7 7 397
damage to the rail head. 17,600 MR8 8 450
Rails may be inclined up to 25° to pass through hatchways of 22,000 MR10 10 555.5
insufficient length. 26,400 MR12 12 661.5

CB Heavy Duty Bulb Section Clamps


Working Max. Min.
Developed especially for the handling of bulb bar profiles Load Limit Product Bulb Web. Weight
and fabrications containing bulb bar in the shipbuilding (lbs.) Code (in.) (in.) (lbs.)
industry. 11,600 694860 1 1/2 1/4 113
Available with either standard hookring for use with existing 13,300 694861 2 3/8 3/8 126 1/2
sling hook, or with integral short chain sling for direct fitting 16,600 694862 3 1/4 1/2 170 1/2
on to the crane hook. 18,800 694863 3 1/4 1/2 198 1/2
13,200 694864 3 1/4 1/2 197
All clamps fitted with locking mechanism. 17,600 694865 3 1/4 1/2 110 1/2
22,000 694866 3 1/2 1/2 125 1/2

CY Hinged Universal Plate Clamps


The CY clamp is based on 92 series range of Working Jaw
clamps and incorporates the universal hinged Load Limit Product Capacity Weight
hookring. (lbs.) Code (in.) (lbs.)
2,200 695237 0- 3/4 10
The Hinged Universal Plate Clamps have been 4,400 695238 0-1 1/4 28 1/2 LOAD
developed especially for the handling of plate 6,600 695239 0-1 1/4 30 Product Code
at any angle thus permitting the awkward lifts Angle 695237 695238 695239
previously considered hazardous. LIFT ONE PLATE ONLY AT A TIME. (degrees) (lbs.) (lbs.) (lbs.)
Suitable for all structural steel up to 300 Brinell 0-30 4,400 8,800 13,200
surface hardness. 30-90 2,200 4,400 16,600
90-120 1,100 2,200 13,300
Safe loads for two clamps.

TH Wide Mouth Clamps Ship Loader


These clamps Iift and turn over plates Pairs of compact C-hooks handle two coils at once
in one smooth operation. Rugged, lightweight
Designed for lifting and handling Easily separated for insertion into coils
wide loads from 0-77⁄8 inches thick.
The clamp is provided with a lever Capacity to 30 tons
operated opening device.

Compact C-hooks
Working Jaw
Load Limit Product Capacity Weight Three types (close stacker, low cost and slit coil)
(lbs.) Code (in.) (lbs.) High-strength quenched & tempered alloy steel
16,750 694810 0-4 115 1/2
Rugged, lightweight and 2-3 times more
16,750 694811 3 1/2-7 7/8 131
resistant to bending than carbon steel
11,600 694812 0-4 118
11,600 694813 3 1/2-7 7/8 133 Low tare weight reduces wear and tear on
12,700 694814 0-4 126 1/2 crane and coils
12,700 694815 3 1/2-7 7/8 144 Large radial corners minimize stress and
14,400 694816 0-4 137 1/2 reduce coil damage
14,400 694817 3 1/2-7 7/8 159 1/2 Curved saddles prevent coil damage
16,600 694818 0-3 1/2 148 1/2 Counterbalanced to hang level when empty
11,000 694819 0-3 1/2 151
Centered under bail for proper balance
11,000 694820 3 1/8-6 5/8 188
22,000 694821 0-4 139 Capacity 100 lbs. to 50 tons
22,000 694822 3 1/2-7 7/8 154

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
800/888-0985 • 716/689-5400
www.cmhoists.com FAX: 716/689-5644 800-888-0985
CM 3062 4/23/06 8:13 PM Page 0002

21-06

COLUMBUS McKINNON CORP.

TAPPED EYENUTS
• Forged A
C S
• Heat treated
• Hot galvanized per ASTM A153
D T
S
E

F J
Working Std. Approx.
load tap weight
Size Dia. limit Product size Dimensions (inches) each
no. (in.) (lbs.) code (in.) A C D E F J S T (lbs.)
3 1
3A ⁄8 2,250 M2602 ⁄2 2.00 1.250 1.562 1.000 .88 1.063 .375 2.62 .30
1 5
4 ⁄2 3,600 M2603 ⁄8 2.50 1.500 2.063 1.160 .94 1.312 .500 3.31 .58
5 3
5 ⁄8 5,200 M2604 ⁄4 3.00 1.750 2.437 1.375 1.19 1.500 .625 4.00 .97
3 7
6 ⁄4 7,200 M2607 ⁄8 3.50 2.000 2.687 1.625 1.31 1.875 .750 4.50 1.76
8 1 15,500 M2609 11⁄4 4.75 2.750 3.531 2.000 1.50 2.062 1.000 5.88 3.81
9 11⁄8 18,500 M2611 13⁄8 5.50 3.250 4.062 2.531 2.06 3.000 1.125 6.73 5.00

SHOULDER EYEBOLT
• Forged steel
• Heat treated
• Quenched & tempered
• Meets IFI standards, ASTM A489, ANSI/ASME, B18.15

Working Approx.
Size load Dimensions weight
dia. limit* Product Thread each
(in.) (lbs.) code A B C UNC-2A (lbs.)
1 1 1
⁄4 x 1 500 456920 ⁄4 1 3
⁄4 ⁄4 - 20 .06
5
5
⁄16 x 11⁄8 900 456921 ⁄16 11⁄8 7
⁄8 5
⁄16 - 18 .11
3
⁄8 x 11⁄4 1,300 456922 3
⁄8 11⁄4 1 3
⁄8 - 16 .18
1
⁄2 x 11⁄2 2,400 456923 1
⁄2 11⁄2 13⁄16 1
⁄2 - 13 .35
5 5
⁄8 x 13⁄4 4,000 456924 ⁄8 13⁄4 13⁄8 5
⁄8 - 11 .70
3 3
⁄4 x 2 5,000 456925 ⁄4 2 11⁄2 3
⁄4 - 10 1.10
7
⁄8 x 2 1⁄4 7,000 456926 7
⁄8 2 1⁄4 111⁄16 7
⁄8 - 9 1.70
1 x 21⁄2 9,000 456927 1 21⁄2 113⁄16 1-8 2.36
11⁄4 x 3 15,000 456928 11⁄4 3 2 3⁄16 11⁄4 - 7 4.68
11⁄2 x 31⁄2 21,000 456929 11⁄2 31⁄2 2 9⁄16 11⁄2 - 6 7.77

*NOTE: Do not exceed the working load limit – reduce the working load To minimize the bending moment, always apply load in the direction of the
limit according to the adjacent table if loading other than true vertical. plane of the eye. Reduce working load limit according to table if loaded
Inspect eyebolts before use. Do not use if bent more than 15° or if wear of other than true vertical.
more than 10% of original dimension is evident. Install with shoulder at 90°
Shoulder eyebolt working load limit
to axis of hole to assure total contact of shoulder. Torque nut/eyebolt to
Angle of loading
assure proper seating. Check seating after initial loading.
True vertical 75° 65° 45° less than 45°
If installing in tapped hole, make sure depth of thread engagement is at Full working 55% 35% 25% Do not use
least 1-1⁄2 times bolt diameter. Thread fit must also be good-tight, load limit of full of full of full
not loose-sloppy. (see chart working working working
above) load limit load limit load limit
Where eyebolts must be aligned, a washer or shim may be placed under the
shoulder to permit alignment when tightened.

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
CM 3059 4/23/06 9:01 PM Page 0002

22-06

COLUMBUS McKINNON CORP.


WIRE ROPE CLIPS
DROP FORGED
• Precision manufactured and galvanized to meet Federal
Specifications FF-C-450, Type 1, Class 1, on all sizes 1/4"
and larger. U-bolts and nuts electrogalvanized on 1/8" and
3/16" sizes, hot dip galvanized all other sizes. All bases hot
dip galvanized.
• Drop forged base.
• 1/8"-5/8" sizes packed unassembled, two pieces per poly
bag and in factory packs.
• 3/4" and larger sizes shipped assembled in factory packs.

Rope Weight
Min. turn- per
Size Product Dimensions (inches) no. back Torque †
100 Factory
(in.) code A B C D E F G H clips (in.) (ft.-lbs.) (lbs.) pack
1 1 23 7 15 13 3 13 15
⁄8 M244 ⁄2-24 ⁄32 ⁄16 ⁄32 ⁄32 ⁄8 ⁄16 ⁄16 2 31⁄4 41⁄2 5 50
3 1 31 9 19 1 1 15
⁄16 M245 ⁄4-20 ⁄32 ⁄16 ⁄32 ⁄2 ⁄2 ⁄16 15⁄32 2 3 3⁄4 71⁄2 9 50
1 5
⁄4 M246 ⁄16-18 11⁄32 1
⁄2 3
⁄4 21
⁄32 9
⁄16 13⁄16 17⁄16 2 4 3⁄4 15 18 50
5 3
⁄16 M247 ⁄8-16 13⁄8 3
⁄4 7
⁄8 23
⁄32 11
⁄16 15⁄16 111⁄16 2 51⁄4 30 30 50
3 7
⁄8 M248 ⁄16-14 11⁄2 3
⁄4 1 29
⁄32 3
⁄4 15⁄8 115⁄16 2 61⁄2 45 42 50
7 1
⁄16 M249 ⁄2-13 17⁄8 1 13⁄16 11⁄16 7
⁄8 125⁄32 25⁄16 2 7 65 70 50
1 1
⁄2 M250 ⁄2-13 17⁄8 1 13⁄16 11⁄8 7
⁄8 129⁄32 25⁄16 3 111⁄2 65 75 30
9 9
⁄16 M296 ⁄16-12 23⁄8 11⁄4 15⁄16 11⁄4 15
⁄16 131⁄32 21⁄2 3 12 95 100 30
5 9
⁄8 M251 ⁄16-12 23⁄8 11⁄4 15⁄16 111⁄32 15
⁄16 2 21⁄2 3 12 95 100 30
3 5
⁄4 M252 ⁄8-11 23⁄4 17⁄16 11⁄2 17⁄16 11⁄16 2 11⁄32 2 13⁄16 4 18 130 150 30
7 3
⁄8 M253 ⁄4-10 31⁄8 15⁄8 13⁄4 119⁄32 11⁄4 2 7⁄16 3 5⁄32 4 20 225 240 10
3
1 M254 ⁄4-10 31⁄2 113⁄16 17⁄8 125⁄32 11⁄4 2 5⁄8 3 15⁄32 5 26 225 250 10
11⁄8 M255 3
⁄4-10 37⁄8 2 2 129⁄32 11⁄4 2 13⁄16 319⁄32 6 34 225 310 10
11⁄4 M256 7
⁄8-9 41⁄4 21⁄8 25⁄16 2 3⁄16 17⁄16 31⁄8 41⁄8 7 37 360 460 5
13⁄8 M257 7
⁄8-9 45⁄8 25⁄16 23⁄8 21⁄4 17⁄16 31⁄8 41⁄4 7 44 360 520 5
11⁄2 M258 7
⁄8-9 415⁄16 23⁄8 219⁄32 21⁄2 17⁄16 313⁄32 47⁄16 8 48 360 590 5
The tightening torque values shown are based upon the threads being clean, dry and free of lubrication.

MALLEABLE – GALVANIZED
• For light duty non-critical applications only.
• Precision manufactured and galvanized to meet or
exceed the performance requirement of Federal
Specifications (FF-C-450 Type 1 Class 2).

Weight
Standard pack Min. Turn per 100
Size Product Std. Dimensions (inches) no. of back Torque pieces
(in.) code pack A B C D E G H clips (in.) (ft.-lbs.) (lbs.)
1 11 1 3 5 7 7
⁄16 D86980 100 10-24* ⁄16 ⁄2 ⁄8 ⁄16 ⁄ 16 ⁄8 3 4 2 3
1 13 1 1 7 1 15
⁄8 D86090 100 10-24* ⁄16 ⁄2 ⁄2 ⁄16 ⁄ 2 ⁄16 3 5 3 5
3 1 31 5 9 1 9
⁄16 D86190 100 ⁄4 ⁄32 ⁄8 ⁄16 ⁄2 ⁄ 16 11⁄16 3 6 5 8
1 5
⁄4 D86290 100 ⁄16 17⁄32 7
⁄8 11⁄16 5
⁄8 11
⁄ 16 13⁄8 3 7 15 12
5 5
⁄16 D86390 100 ⁄16 17⁄32 7
⁄8 11⁄16 11
⁄16 11
⁄ 16 13⁄8 3 8 15 15
3 3
⁄8 D86490 100 ⁄8 15⁄8 1 7
⁄8 13
⁄16 7
⁄ 8 15⁄8 3 10 30 21
7 3
⁄16 D86590 50 ⁄8 15⁄8 1 7
⁄8 13
⁄16 15
⁄ 16 15⁄8 4 10 40 25
1 7
⁄2 D86690 50 ⁄16 2 11⁄4 1 11⁄16 1 17⁄8 4 15 45 38
9 1
⁄16 D86790 50 ⁄2 25⁄16 115⁄32 13⁄16 13⁄16 11⁄8 23⁄16 4 16 50 41
5 1
⁄8 D86890 25 ⁄2 25⁄16 115⁄32 13⁄16 15⁄16 11⁄8 23⁄16 4 16 75 53
3 9
⁄4 D86900 25 ⁄16 29⁄16 13⁄4 111⁄32 11⁄2 11⁄4 27⁄16 5 22 75 76
*UNC 2-4 Threads

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
CM 3063 4/23/06 9:02 PM Page 0002

23-06

COLUMBUS McKINNON CORP.

EYE AND EYE SWIVELS


• Hot dip galvanized forged steel
• Ultimate load is 5 times working load limit
• Meets the performance requirements of RR-C-271D,
Type VII, Class 2

Working Approx.
load weight
Dia. limit Product Dimensions (inches) each
(in.) (lbs.)* code A B C D M R S (lbs.)
1
⁄4 850 M4400 11⁄4 5
⁄8 3
⁄4 11⁄16 5
⁄16 215⁄16 1
⁄4 .19
5
⁄16 1,250 M4401 15⁄8 3
⁄4 1 11⁄4 3
⁄8 3 9⁄16 5
⁄16 .34
3 7
⁄8 2,250 M4402 2 ⁄8 11⁄4 11⁄2 1
⁄2 4 5⁄16 3
⁄8 .69
1
⁄2 3,600 M4403 21⁄2 13⁄16 11⁄2 2 5
⁄8 53⁄8 1
⁄2 1.34
5
⁄8 5,200 M4404 3 11⁄2 13⁄4 2 3⁄8 3
⁄4 65⁄8 5
⁄8 2.37
3
⁄4 7,200 M4407 31⁄2 15⁄8 2 2 5⁄8 7
⁄8 73⁄8 3
⁄4 4.00
1 12,500 M4409 43⁄4 217⁄64 23⁄4 317⁄32 11⁄8 97⁄8 1 9.00
*To avoid injury, do not exceed working load limit.

WIRE ROPE THIMBLES

Malleable, Zinc Plated


Made according to Federal Specifications FF-T-276b Type 2.
Approx.
Rope weight
dia. Product Std. Dimensions (inches) each
(in.) code pack A B C D E (lbs.)
1
⁄8 D86095 100 1.94 1.06 1.31 .69 .25 .035
3
⁄16 D86195 100 1.94 1.06 1.31 .69 .31 .035
1
⁄4 D86295 100 1.94 1.06 1.31 .69 .38 .035
5
⁄16 D86395 100 2.13 1.25 1.50 .81 .44 .04
3
⁄8 D86495 50 2.38 1.47 1.63 .94 .53 .067
1
⁄2 D86695 50 2.75 1.75 1.88 1.13 .69 .125
5
⁄8 D86895 25 3.50 2.38 2.25 1.38 .91 .345

Heavy Duty, Hot Galvanized


Made according to Federal Specifications FF-T-276b Type 3.
Standard Approx.
Rope pack weight
dia. Product Std. Dimensions (inches) each
(in.) code pack A B C D E (lbs.)
1
⁄4 D87296 25 2.19 1.50 1.63 .88 .41 .075
5
⁄16 D87396 25 2.50 1.81 1.88 1.06 .50 .14
3
⁄8 D87496 25 2.88 2.13 2.13 1.13 .66 .25
1
⁄2 D87696 25 3.63 2.56 2.75 1.50 .84 .51
5
⁄8 D87896 10 4.25 3.00 3.25 1.75 1.00 .75
3
⁄4 D87906 10 5.00 3.50 3.75 2.00 1.25 1.47
7
⁄8 D87916 10 5.50 4.00 4.25 2.25 1.38 1.85

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
CM 3061 4/23/06 9:03 PM Page 0002

24-06

COLUMBUS McKINNON CORP.

OBLONG MASTER LINK


Heat Treated Alloy Steel
Type & size of chain sling
Link size (inches) on which used
Working Diameter Inside Inside Single Double Triple Quad Weight
Link Product load limit material width length type type type type each
no. code (lbs.)* A B C S&C D T Q (lbs.)
13
HA40 554931 3,600 ⁄32 11⁄2 3 7
⁄32 7
⁄32 — — .33
1
HA50 554932 6,100 ⁄2 21⁄2 5 9

32
9
32 ⁄ 7
⁄32 7
⁄32 .8
3
HA75 554935 12,300 ⁄4 2 3⁄4 5 1⁄2 3
8⁄ 3
8 ⁄ 9
⁄32 9
⁄32 2.1
HA100 554938 20,800 1 3 1⁄2 7 1
⁄2 or 5⁄8 1
2 ⁄ 3
⁄8 3
⁄8 4.6
1
HA125 554940 31,300 1 ⁄4 4 3⁄8 8 3⁄4 3
⁄4 5
8 ⁄ 1
⁄2 1
⁄2 9.2
HA150 554943 49,000 11⁄2 51⁄4 101⁄2 7
⁄8 3
4 ⁄ 5
⁄8 5
⁄8 15.7
3 7 3 3
HA175 554946 73,500 1 ⁄4 6 12 1 8 ⁄ ⁄4 ⁄4 24.5
HA200 554949 88,900 2 7 14 11⁄4 1 7
⁄8 7
⁄8 37.3
HA225 554951 125,200 2 1⁄4 8 16 — 11⁄4 1 1 54.0
HA275 554957 187,800 2 3⁄4 9 16 — — 11⁄4 11⁄4 84.8

OBLONG MASTER LINK SUB-ASSEMBLY for triple and quad branch chain slings
Heat Treated Alloy Steel
Oblong master Master coupling
HA Sub- link size link size
chain assembly Product (inches) (inches) Weight
(in.) number code A B C D E F (lbs.)
7 1
⁄32 HA50-SA 554974 ⁄2 21⁄2 5 11
⁄32 5
⁄8 11⁄8 1.0
9 3
⁄32 HA75-SA 554975 ⁄4 2 3⁄4 5 1⁄2 15
⁄32 7
⁄8 19⁄16 2.6
3
⁄8 HA100-SA 554976 1 31⁄2 7 21
⁄32 11⁄4 2 1⁄4 6.1
1
⁄2 HA125-SA 554977 11⁄4 4 3⁄8 8 3⁄4 29
⁄32 13⁄4 3 1⁄8 13.3
5
⁄8 HA150-SA 554978 11⁄2 5 1⁄4 10 1⁄2 15⁄32 2 1⁄4 4 24.3
3
⁄4 HA175-SA 554979 13⁄4 6 12 19⁄32 23⁄8 4 3⁄8 36.1
7
⁄8 HA200-SA 554980 2 7 14 117⁄32 23⁄4 5 1⁄4 57.4
1 HA225-SA 554981 2 1⁄4 8 16 125⁄32 3 6 83.9
11⁄4 HA275-SA 554983 2 3⁄4 9 16 2 1⁄32 31⁄2 7 129.7
**Consisting of oblong master link and two welded master coupling links.

CONNECTING LINK
• Heat treated hot forged steel
• Meets or exceeds Fed. Spec. RR-C-271D.
• Marked with size and grade for proper application
(G30).
• Design load equals 4 times working load limit. Working Clear Electro- Approx.
• Interlocking lugs and integral rivets on all Chain load finish galvanized weight
size limit Product Product Factory each
sizes except 3/16", 1/4" and 5/16" which have (in.) (lbs.)* code code pack (lbs.)
rivets only. 3
⁄16 800 M613† M613G 10 .03
• Clear protective finish resists rust. Also available 1
⁄4 1,300 M614† M614G 10 .08
in electro-galvanized finish. Hot dip galvanized 5
⁄16 1,900 M615† M615G 10 .12
available upon request. 3
⁄8 2,650 M616† M616G 10 .20
• These connecting links are designed for use as 7
⁄16 3,700 M617† M617G 10 .24
repair links for G30 chain only. 1
⁄2 4,500 M618† M618G 5 .42
• They are not to be used for lifting and not to be 5
⁄8 6,900 M620† M620G 5 .75
3
used for load securement (tie-down). ⁄4 10,600 M622 M622G Bulk 1.16
7
⁄8 12,800 M624 M624G Bulk 1.75
1 17,900 M626 M626G Bulk 2.40
Packed unassembled. M613-M618 are poly bagged; M620 boxed.

*To avoid injury, do not exceed working load limit. Use only alloy chain and attachments for overhead lifting.

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
www.cmchain.com 800/888-0985 • 716/689-5400
www.cmforge.com FAX: 716/689-5644 800-888-0985
CM 3060 4/25/06 10:15 AM Page 0002

25-06

COLUMBUS McKINNON CORP.


Type & size of chain sling
MASTER RING Ring size (inches) on which used
Heat Treated Alloy Steel Working Diameter Inside Single Double Triple Quad Weight
Product load limit material dia. of ring type type type type each
code (lbs.)* K L S&C D T Q (lbs.)
1
554611 3,500 ⁄2 21⁄2 9
⁄32 — — — .5
5 9
554613 6,100 ⁄8 3 — ⁄32 — — 1.0
3 3 9 9
554615 9,100 ⁄4 4 ⁄8 — ⁄32 ⁄32 1.8
7 3
554617 12,300 ⁄8 4 — ⁄8 — — 2.6
1 3 3
L 554619 18,400 1 4 ⁄2 — ⁄8 ⁄8 3.4
K 554623 20,800 11⁄4 5 5
⁄8 or ⁄4 3 1
⁄2 — — 6.9
554627 31,300 11⁄2 6 7
⁄8 5
⁄8 1
⁄2 1
⁄2 11.7
554630 49,000 13⁄4 7 1 3
⁄4 5
⁄8 5
⁄8 18.6
7 3 3
554635 73,500 2 8 — ⁄8 ⁄4 ⁄4 27.9
554636 88,900 21⁄4 9 11⁄4 1 7
⁄8 7
⁄8 39.9

PEAR-SHAPED MASTER LINK Type & size of


chain sling on
Heat Treated Alloy Steel Working Link size (inches) which used
load Diameter Inside Single Double Weight
Link limit Product material Inside widths length type type each
G no. (lbs.)* code G H I J S&C D (lbs.)
1
HA51 6,100 554702 ⁄2 11⁄4 2 1⁄2 5 5⁄16 9

32
9

32 .8
3
I H HA79 12,300 554706 ⁄4 2 2 3⁄4 5 5⁄8 3

8
3

8 2.1
HA103 20,800 554710 1 2 5⁄8 31⁄2 71⁄4 1
⁄2 or 5⁄8 1

2 4.6
HA129 31,300 554714 11⁄4 1
3 ⁄4 45⁄8 83⁄4 3
⁄4 5

8 9.2
HA153 49,000 554719 11⁄2 3 7⁄8 51⁄4 10 1⁄2 7
⁄8 3

4 15.3
J HA179 59,200 554723 13⁄4 1
4 ⁄2 6 12 1 7

8 23.9
HA201 82,600 554726 2 31⁄2 7 14 11⁄4 1 35.9
HA229 125,200 554731 21⁄4 6 8 16 — 11⁄4 52.8
WELDED COUPLING LINK Link size (inches)
Chain size (in.) Diameter material (D) Inside width (E) Inside length (F)
Heat Treated Alloy Steel 9 11 5
⁄32 ⁄32 ⁄8 11⁄8
F 3 15 7
⁄8 ⁄32 ⁄8 19⁄16
1 21
⁄2 ⁄32 11⁄4 21⁄4
5 25
⁄8 ⁄32 11⁄2 25⁄8
3 29
⁄4 ⁄32 13⁄4 31⁄8
7
E ⁄8 11⁄32 2 31⁄2
1 15⁄32 21⁄4 4
11⁄8 19⁄32 23⁄8 43⁄8
D 11⁄4 117⁄32 23⁄4 51⁄4
11⁄2 125⁄32 3 6
Dimensions (inches)
COUPLING LINK Working Diameter
Chain load Load Pin hole to Weight
Grade 80 size limit Product Replacement accept each
(in.) (lbs.)* code Kit A B C D E† male leg (lbs.)
7 1
⁄32 2,100 664021 R664021 ⁄4 113⁄32 15⁄16 31⁄64 13
⁄32 ⁄2 1
.12
C 9
⁄32 3,500 664028 R664028 5
⁄16 113⁄16 111⁄16 5
⁄8 1
⁄2 35
⁄64 .23
3 1
A ⁄8 7,100 664038 R664038 ⁄2 213⁄32 2 7⁄32 53⁄64 3
⁄4 47
⁄64 .65
1 11
⁄2 12,000 664050 R664050 ⁄16 3 3⁄8 31⁄8 17⁄32 1 59
⁄64 1.5
5 13
⁄8 18,100 664062 R664062 ⁄16 4 1⁄16 311⁄16 11⁄2 11⁄4 11⁄16 2.6
3 15
⁄4 28,300 664075 R664075 ⁄16 4 25⁄32 4 5⁄16 151⁄64 11⁄2 11⁄4 3.8
7
⁄8 34,200 664089 R664089 13⁄64 5 1⁄8 5 5⁄16 129⁄32 13⁄4 111⁄32 6.3
B
1 47,700 664100 R664100 11⁄4 5 3⁄4 6 3⁄16 2 3⁄16 2 19⁄16 9.3
11⁄4 72,300 664125 R664125 117⁄32 6 13⁄16 73⁄4 2 5⁄8 21⁄4 2 17.3
D †
Diameter of stock of largest master link intended to be used with Coupling Link.
• For attaching chain to master links and eye type hooks and for installing new body
chain in old slings.
E • C.V.S.A. approved.
*To avoid injury, do not exceed working load limit. Use only alloy chain and attachments for overhead lifting.

AVAILABLE THROUGH
WUENSCH SALES CO. (see page 1405)
HOUSTON: 800-607-9543 • Fax: 877-921-3194
E-mail: sales@wuenschsales.com
Web: www.wuenschsales.com
55 4/23/06 9:06 PM Page 57

26-06

COLUMBUS MCKINNON CORP.

WELDED STEEL CHAIN SLINGS—Grade 80 HERC-ALLOY 800


Single Sling Chains
Oblong master link Approx.
Dimensions (inches) weight
Working Master Diameter Inside Inside (lbs.) .
Chain size load limit link material width length Type SOS
(in.) (mm.) (lbs.)* number A B C 5 ft. reach
7
⁄32 5.5 2,100 HA40 13
⁄32 1 1⁄2 3 4
9
⁄32 7 3,500 HA50 ⁄2
1
2 1⁄2 5 5
3
⁄8 10 7,100 HA75 ⁄4
3
2 3⁄4 5 1⁄2 10
1
⁄2 13 12,000 HA100 1 3 1⁄2 7 18
5
⁄8 16 18,100 HA100 1 3 1⁄2 7 25
3
⁄4 20 28,300 HA125 11⁄4 4 3⁄8 8 3⁄4 38
7
⁄8 22 34,200 HA150 11⁄2 5 1⁄4 10 1⁄2 54
1 26 47,700 HA175 13⁄4 6 12 76
11⁄4 32 72,300 HA200 2 7 14 116

Double Sling Chains

60° 45° 30°

Oblong master link Approx.


Dimensions (inches) weight
Diameter Inside Inside (lbs.) .
Chain size Working load limit (lbs.)* Master link material width length Type DOS
(in.) (mm.) 60° 45° 30° number A B C 5 ft. reach
7
⁄32 5.5 3,600 3,000 2,100 HA40 ⁄32
13
1 1⁄2 3 8
9
⁄32 7 6,100 4,900 3,500 HA50 ⁄2
1
2 1⁄2 5 9
3
⁄8 10 12,300 10,000 7,100 HA75 3
⁄4 2 3⁄4 5 1⁄2 18
1
⁄2 13 20,800 17,000 12,000 HA100 1 3 1⁄2 7 31
5
⁄8 16 31,300 25,600 18,100 HA125 1 1⁄4 4 3⁄8 8 3⁄4 49
3
⁄4 20 49,000 40,000 28,300 HA150 1 1⁄2 5 1⁄4 10 1⁄2 71
7
⁄8 22 59,200 48,400 34,200 HA175 1 3⁄4 6 12 98
1 26 82,600 67,400 47,700 HA200 2 7 14 132
11⁄4 32 125,200 102,200 72,300 HA225 2 1⁄4 8 16 221

Triple Sling Chains

60° 45° 30°

Oblong master link sub-assembly Approx.


Dimensions (inches) weight
Master link Diameter Inside Inside (lbs.) .
Chain size Working load limit (lbs.)* sub-assembly material width length Type TOS
(in.) (mm.) 60° 45° 30° number A B C 5 ft. reach
7
⁄32 5.5 5,450 4,450 3,150 HA50-SA ⁄2
1
2 1⁄2 5 12
9
⁄32 7 9,100 7,400 5,200 HA75-SA ⁄4
3
2 3⁄4 5 1⁄2 14
3
⁄8 10 18,400 15,100 10,600 HA100-SA 1 3 1⁄2 7 28
1
⁄2 13 31,200 25,500 18,000 HA125-SA 1 1⁄4 4 3⁄8 8 3⁄4 50
5
⁄8 16 47,000 38,400 27,100 HA150-SA 1 1⁄2 5 1⁄4 10 1⁄2 79
3
⁄4 20 73,500 60,000 42,400 HA175-SA 1 3⁄4 7 12 112
7
⁄8 22 88,900 72,500 51,300 HA200-SA 2 7 14 155
1 26 123,900 101,200 71,500 HA225-SA 2 1⁄4 8 16 215
11⁄4 32 187,800 153,400 108,400 HA275-SA 2 3⁄4 9 16 348

Quadruple Sling Chains

30°
60° 45°

Oblong master link sub-assembly


Dimensions (inches)
Quad at 60° Quad at 45° Quad at 30°
Master link Diameter Inside Inside Approx. weight (lbs.) .
Chain size Working load limit (lbs.)* sub-assembly material width length Type TOS Type QOS
(in.) (mm.) 60° 45° 30° number A B C 5 ft. reach 5 ft. reach
7
⁄32 5.5 5,450 4,450 3,150 HA50-SA ⁄2
1
2 1⁄2 5 12 16
9
⁄32 7 9,100 7,400 5,200 HA75-SA ⁄4
3
2 3⁄4 5 1⁄2 14 18
3
⁄8 10 18,400 15,100 10,600 HA100-SA 1 3 1⁄2 7 28 36
1
⁄2 13 31,200 25,500 18,000 HA125-SA 1 1⁄4 4 3⁄8 8 3⁄4 50 62
5
⁄8 16 47,000 38,400 27,100 HA150-SA 1 1⁄2 5 1⁄4 10 1⁄2 79 97
3
⁄4 20 73,500 60,000 42,400 HA175-SA 1 3⁄4 6 12 112 137
7
⁄8 22 88,900 72,500 51,300 HA200-SA 2 7 14 155 188
1 26 123,900 101,200 71,500 HA225-SA 2 1⁄4 8 16 215 260
11⁄4 32 187,800 153,400 108,400 HA275-SA 2 3⁄4 9 16 348 421

All attachments equal the strength of the chain with which they are used. When ordering, specify size, type, reach, and attachments required.

AVAILABLE THROUGH
WUENSCH SALES CO. (see page 1405)
HOUSTON: 800-607-9543 • Fax: 877-921-3194
E-mail: sales@wuenschsales.com
Web: www.wuenschsales.com
56 4/23/06 9:09 PM Page 58

27-06

COLUMBUS MCKINNON CORP.


Made from low carbon steel, for all ordinary applications not requiring
Proof Coil Chain chain of relatively high tensile strength. All chain is proof tested with
certificate available upon request. Not recommended for overhead
lifting.
Marked every foot on 3/16 thru 1/2 chain.
Finishes: Self-colored, Zinc plated, Galvanized; in drums, pails and
reels.

Inside Inside Links Pounds **Working


Trade Size Material Length Width Per Per Load Limit
Inch mm Diameter Inches Inches Foot 100 Ft. lb kg
3/16 5 0.218 0.95 0.40 12.5 37 800 365
1/4 7 0.270 1.22 0.46 10 60 1300 580
5/16 8 0.309 1.22 0.46 10 81 1900 860
3/8 10 0.386 1.37 0.60 8.5 132 2650 1200
1/8" 1/2 13 0.531 1.5 0.81 8 278 4500 2030
3/16" 5/8 16 0.656 1.87 0.99 6.5 422
3/4 20 0.787 2.120 1.12 5.5 628 10600 4800
1/4" 1 26 1.031 2.75 1.50 4.5 1067 17900 8100
**Warning: Do not exceed Working Load Limit. Do not use for
5/16" overhead lifting.

Machine Chain - Twist Link Finishes: Polished – Zinc plated – Galvanized


Uses: General utility. Material: Low carbon steel; 100 ft. per carton

Material Inside Inside Links Pounds ** Working


Trade Diameter Length Width Per Per Load Limit
Size Inch mm Inches Inches Foot 100 Ft. lb kg
4 4 0.120 3 0.52 0.18 23 13 205 93
2 0.148 3.7 0.58 0.21 20-1/2 20 310 141
1/0 0.177 4.5 0.73 0.26 17-1/2 29 440 200
2/0 0.192 4.9 0.72 0.28 16-1/2 34 520 236
4/0 0.218 5.5 0.89 0.31 13-1/2 44 670 304
5/0 0.250 6.4 1.00 0.37 12 57 880 399
* * Warning: Do not exceed Working Load Limit. Do not use for
overhead lifting.
5/0 4/0 2/0 1/0 2

Coil Chain - Straight Link


Uses: General utility. Finishes: Polished – Zinc plated – Galvanized
Material: Low carbon steel; 100 ft. per carton

Material Inside Inside Links Pounds ** Working


Trade Diameter Length Width Per Per Load Limit
Size Inch mm Inches Inches Foot 100 Ft. lb kg
4 0.120 3 1.11 0.20 10-7/8 10 205 93
2 0.148 3.7 1.18 0.26 10 15 310 141
1/0 0.177 4.5 1.25 0.31 9-1/2 22 440 200
2/0 0.192 4.9 1.26 0.34 9-1/2 27 520 236
4/0 0.218 5.5 1.39 0.37 8-1/2 35 670 304
5/0 0.250 6.4 1.52 0.44 8 46 880 399
** Warning: Do not exceed Working Load Limit. Do not use for
overhead lifting.

4 2 1/0 2/0 5/0

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
800/888-0985 • 716/689-5400
www.cmchain.com FAX: 716/689-5644 800-888-0985
57 4/23/06 9:10 PM Page 59

28-06

COLUMBUS MCKINNON CORP.


Applications: Primarily used as a counter-balance chain for double- Description: Mild steel is the standard material. Also available in
hung window sashes. Also suitable for use with arc lamps and for bronze, stainless steel, brass and aluminum.
many applications requiring flat metal chain operating over pulleys. Finishes include bright, copper plated and zinc plated.

Sash Chain Material: Low carbon steel; also available in solid bronze.
Finishes: Polished—Copper-plated—Zinc-plated.

100 ft. per carton or on 500 ft. reels.

Stock Inside Pounds ** Working


Trade Thickness Length Per 100 Load Limit
Size Inch mm Inches Feet lb kg
40 45 50 8 0.035 0.9 0.57 4 75 34
25 0.042 1.1 0.57 5 94 43
30 0.028 0.7 0.57 5.5 80 36
35 0.035 0.9 0.57 7 65 47
40 0.042 1.1 0.55 8 140 63
45 0.050 1.3 0.55 9.5 175 79
50 0.062 1.6 0.62 13 225 102

8 25 30 35 ** Warning: Do not exceed Working Load Limit.

Suitable for general utility use not requiring high strength.


Single Jack Chain
Material: Low carbon steel; also available in brass.
Finishes: Polished—Zinc-plated—Black Polymer.

Stock Inside Feet Pounds ** Working


Trade Thickness Length Per Per 100 Load Limit
Size Inch mm Inches Reel Feet lb kg
18 0.047 1.2 0.39 100/250 2.0 5 2
16 0.062 1.6 0.50 100/200/250/500 3 10 5
14 0.080 2.0 0.63 150/200/500 5 16 7
12 0.105 2.7 0.75 100/200/250/500 9 29 13
10 0.135 3.4 0.93 50/100/250 14 43 20
8 0.162 4.1 1.09 50/250 21 60 27

** Warning: Do not exceed Working Load Limit.


18 16 14 12 10 8

Made from high carbon steel with high strength-to-weight ratio. All
High Test Chain (Grade 43) Grade 43 chain is proof tested with certificate available upon request.

Not recommended for overhead lifting.


Finishes: Polished—Galvanized—Zinc-plated.

Inside Inside Links Pounds ** Working


1/4" Trade Size Material Length Width Per Per Load Limit
5/16" Inch mm Diameter Inches Inches Foot 100 Ft. lb kg
1/4 7 0.281 1.22 0.46 10 62 2600 1180
5/16 8 0.327 1.10 0.60 11 98 3900 1770
3/8 10 0.386 1.37 0.60 9 133 5400 2450
7/16 12 0.468 1.37 0.75 9 210 7200 3270
1/2 13 0.531 1.50 0.81 8 278 9200 4170
5/8 16 0.656 1.87 1.00 6.5 422 13000 5910
3/4 20 0.781 2.12 1.12 5.5 606 20200 9180
** Warning: Do not exceed Working Load Limit. Not for overhead lifting.
3/8"

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
800/888-0985 • 716/689-5400
www.cmchain.com FAX: 716/689-5644 800-888-0985
CM 3064 4/23/06 9:12 PM Page 0002

29-06

COLUMBUS McKINNON CORP.

DOUBLE LOOP CHAIN


• Lightweight general purpose chain.
• Standard material is a mild steel, with a bright finish or zinc plated.
Carton
Working Bright Zinc Weight
load finish plated Feet Material Inside Links per
Trade limit Product Product per diameter length per 100 ft.
number (lbs.)* code code carton (in.) (in.) foot (lbs.)
5 55 680150 680450 100 .062 .92 13 31⁄2
4 70 680151 680451 100 .072 1.00 12 41⁄2
3 90 680152 680452 100 .080 1.10 11 53⁄4
2 115 680153 680453 100 .092 1.33 9 71⁄2
1 155 680154 680454 100 .105 1.50 8 10
1/0 200 680155 680455 100 .120 1.71 7 13
2/0 255 680156 680456 100 .135 1.71 7 17
3/0 305 680157 680457 100 .148 2.18 5.5 20
4/0 365 680158 680458 100 .162 2.18 5.5 23
8/0 705 680159 680459 100 .225 2.90 4.1 48
Sizes 4 through 4/0 also available on reels.

SINGLE LOOP CHAIN


• Standard material is a mild steel, with a bright finish or zinc plated.

Carton
Working Bright Zinc Weight
load finish plated Feet Material Inside Links per
Trade limit Product Product per diameter length per 100 ft.
number (lbs.)* code code carton (in.) (in.) foot (lbs.)
2 155 681150 681450 100 .091 1.08 11.1 10
1/0 265 681151 681451 100 .120 1.29 9.3 17
2/0 340 681152 681452 100 .135 1.48 8.1 22
3/0 405 681153 681453 100 .148 1.63 7.4 26
4/0 485 681154 681454 100 .162 1.80 6.7 31
5/0 580 681155 681455 100 .177 2.15 5.6 35
For sprocket wheel or valve wheel, overhead door, ventilator and machinery chains for applications requiring greater strength than
double loop chain.
Also available in brass. Also available on reels.

SAFETY CHAIN
• Primarily designed for use with plumbing fixtures. Suitable for applications requiring light, flat metal chain.
• Brass with a bright finish.
Carton
Working Brass (bright) Feet Stock Inside Links Weight
Trade load limit Product per thickness length per per 100 ft.
number (lbs.)* code carton (in.) (in.) foot (lbs.)
2/0 23 685754 100 .018 .44 27 21⁄4
1/0 30 685755 100 .023 .50 24 21⁄2
1 40 685756 100 .028 .60 20 31⁄4
3 75 685758 100 .037 .75 16 61⁄4
Refill reels of No. 1/0 bright brass (200 ft.) are available. All sizes can be bulk packed.

* To avoid injury, do not exceed working load limit. Use only alloy chain and attachments for overhead lifting.

COLUMBUS McKINNON CORPORATION


140 JOHN JAMES AUDUBON PARKWAY
AMHERST, NEW YORK 14228-1197
800/888-0985 • 716/689-5400

www.cmchain.com FAX: 716/689-5644 800-888-0985


30-06

SKOOKUM

ALLOY STEEL
ANCHOR PATTERN
SHACKLES

No. 320 No. 263


Safety Pin Shackle Screwpin Shackle

Size SWL* D W Tol. L Tol. B R P Wt. (lbs.)


1/2" 5.5 5/8" 7/8" ±1/16" 2-1/2" ±1/8" 1-7/16" 1-5/16" 5/8" .75
5/8" 7 3/4" 1" ±1/16" 2-7/8" ±1/8" 1-3/4" 1-9/16" 3/4" 1.5
3/4" 9 7/8" 1-1/8" ±1/16" 3-1/16" ±1/4" 1-7/8" 1-13/16" 7/8" 2.2
7/8" 12 1" 1-1/4" ±1/16" 3-5/8" ±1/4" 2-1/8" 2-1/8" 1" 3.7
1" 16 1-1/8" 1-3/8" ±1/16" 4" ±1/4" 2-3/8" 2-1/4" 1-1/8" 5.5
1-1/8" 17.5 1-1/8" 1-13/16" ±1/16" 4-1/4" ±1/4" 2-15/16" 2-5/8" 1-1/4" 7.2
1-1/4" 21 1-1/4" 2-1/32" ±1/16" 4-5/8" ±1/4" 3-1/4" 2-15/16" 1-3/8" 10.5
1-3/8" 26 1-3/8" 2-1/4" ±1/8" 5-1/4" ±1/4" 3-5/8" 3-1/4" 1-1/2" 13.8
1-1/2" 30 1-1/2" 2-3/8" ±1/8" 5-3/4" ±1/4" 3-7/8" 3-7/16" 1-5/8" 18.5
1-5/8" 35 1-5/8" 2-5/8" ±1/8" 6-1/4" ±1/4" 4-5/8" 3-3/4" 1-3/4" 22.0
* Short Tons

ALLOY STEEL
CHAIN PATTERN
SHACKLES

No. 270 No. 321


Screwpin Shackle Safety Pin Shackle

Size SWL* D W Tol. L Tol. R P Wt. (lbs.)


1-1/8" 17.5 1-1/8" 1-13/16" ±1/16" 3-9/16" ±1/4" 2-5/8" 1-1/4" 6.6
1-1/4" 21 1-1/4" 2-1/32" ±1/16" 3-7/8" ±1/4" 2-15/16" 1-3/8" 8.9
1-3/8" 26 1-3/8" 2-1/4" ±1/8" 4-1/2" ±1/4" 3-1/4" 1-1/2" 12
1-1/2" 30 1-1/2" 2-3/8" ±1/8" 5" ±1/4" 3-7/16" 1-5/8" 16.2
1-3/4" 40 1-3/4" 2-7/8" ±1/8" 5-3/4" ±1/4" 4-1/2" 2" 25.0
* Short Tons

STANDARD Winches, Winch Parts & Marine Equipment


Stud Link Chain & Anchors
STEAM WINCH CO., INC. Anchor Shackles also available 1-3/4” (41 ton) thru 4-1/2” (210 ton).
36 Aetna St. • P.O. Box 435 • Jersey City, NJ 07302-0435
Chain Shackles also available 2” (52 ton) thru 4-1/2” (210 ton).
Tel: 201-433-6974 • Fax: 201-433-1459
E-mail: RA_ANGELO@msn.com Double and single nut towing shackles also available.
0030-03 4/23/06 9:13 PM Page 1

31-06

MARQUIP MARINE EQUIPMENT


HEAVY LIFT TOWING SHACKLES
4340 STEEL

E
D
D

B B

C A F C A F

No. 211 Anchor Pattern


Size A 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/2 4
Pin Diameter B 2 2 2-1/4 2-1/2 2-3/4 3 3-3/4 4-1/4
Jaw Width C 2-7/8 3-1/4 4-1/4 4-1/2 4-1/2 4-1/2 5-3/4 6-1/2
Reach D 7 7-3/4 9 10 11 13 15 16
E 5 5-1/4 5-1/2 7-1/4 7-3/4 8 9 11
F 4-1/4 4-1/2 5 5-1/2 6 6-1/2 8-1/4 9
WLL Tons — 40 44 57 71 80 94 132 185
Weight Lbs. — 23 41 62 88 112 133 250 358
dimensions in inches
ANCHOR PATTERN
Showing single nut pin arrangement

No. 210 Chain Pattern


Size A 2 2-1/4 2-1/2 2-3/4 3 3-1/2 4
Pin Diameter B 2 2-1/4 2-1/2 2-3/4 3 3-3/4 4-1/4
Jaw Width C 3-1/4 4-1/2 4-1/2 4-1/2 4-1/2 5-3/4 6-1/2
Reach D 6-3/4 7 10-1/2 11 13 10-1/2 12
E 4-1/2 5 5-1/2 6 6-1/2 8-1/4 9
WLL Tons — 44 57 71 80 94 132 185
Weight Lbs. — 36 62 86 110 125 218 310
dimensions in inches

CHAIN PATTERN
Showing double nut pin arrangement

When you want the


very best quality
marine equipment
ask for it by name:

P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124 • Phone (206) 623-8500 • Fax (206) 621-9834
E-mail: info@wachain.com • VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
0026-04 4/29/06 5:38 PM Page 1

32-06

MAMPAEY OFFSHORE INDUSTRIES B.V.

QUICK RELEASE MOORING HOOKS


These quick release mooring hooks have been specifically
designed for safe release of mooring lines whilst under full load
conditions. The loads exercised on the hook part are reduced
through to the release mechanism permitting manual release
under full load conditions with only a minimum of effort
(approximately 15 kgf). Once released, only a single action is
required to reset the hook to its working position.

Standard mooring units are available with 40, 60, 75, 100, 125,
150 and 200 tons S.W.L. and as single, double, triple, quadruple
or sextuple versions. The units can be mounted on concrete or
steel deck structures. Units are designed to operate through 180
degrees horizontally and 45 degrees vertically. They can also be
supplied with integral capstans, and/or other features such as electric or hydraulic remote release systems controlled by
a remote panel, and/or mooring load measurement systems.

Hooks can be tested under supervision of LR, ABS, DNV, BV, RINA or any other required test classification society.

QUICK RELEASE DISC TYPE TOWING HOOKS


Quick release disc type towing hooks have been specifically
designed for safe release of towing lines whilst under full load
conditions, including use with all types of towing lines including high-
elastic polypropylene and nylon.

The towing hook features a rotating disc which rotates freely after
release, avoiding high release impacts on the hook. This free
rotation also reduces impacts on ships’ foundations, and increases
onboard comfort.

Standard towing hooks are available with 7, 15, 25, 45, 65, and 100
tons S.W.L. Higher loads are available upon request. The hooks can also be delivered incorporating remote release
systems and/or load measurement systems.

Hooks can be tested under supervision of LR, ABS, DNV, BV, RINA or any other required test classification society.
Shock absorbing spring construction units, rail type units, and/or any other special configurations are available upon
request.

Mampaey Offshore Industries BV


P. O. Box 667/698, 3300 AR Dordrecht, Holland
Tel: +31 (0)78-6173322
Fax: + 31 (0)78-6175211
e-mail: mail@mampaey.com
www.mampaey.com
0027-03 4/23/06 9:15 PM Page 1

33-06

WASHINGTON CHAIN & SUPPLY, INC.

WELD-ON HORN CLEATS WELD-ON SHIP CLEATS

BuShip No. S1201-860099


WELD-ON SHIP CLEATS
A Size Serial No. Wt. B C
10” C0 8# 2-1/2” 7/16”
12” C1 17# 3” 9/16”
16” C2 25# 4” 3/4”
WELD-ON HORN CLEATS 18” C3 36# 4-1/2” 7/8’
A Size Serial No. Wt. B C Print No. 24” C4 84# 6” 1-1/8”
12” B.H. 1 3# 1-1/2” 3-3/4” S1201-921572 30” C5 145# 7-1/2” 1-1/2”
16” B.H. 2 8# 2” 5” S1201-921572 36” C6 226# 8-1/2” 1-3/4”

BUOY RELEASE HOOKS

These simple but effective hooks are used for berthing vessels A lanyard run from the ship to the hook provides for a “remote”
to buoys by running the ship’s hawsers through the release hook release of the lines. Buoy release hooks are available in 300,000-
situated on top of the mooring buoy. and 400,000-pound load rating, with up to a 6” jaw radius.

QUICK-RELEASE HOOKS – FOR MOORING AND TOWING


PATENTED

Quick-release hooks, unlike their buoy release counterparts, also be supplied with integrated capstans and/or load-monitoring
can be tripped while under full load. They are available in single, devices, if required.
double, triple, and quadruple mounting, with capacities from Manual release hooks, with capacities from 10 to 200 tons, can
10 to 400 tons. The release mechanism can be operated locally be tripped easily by hand while under maximum line tension.
or from a remote station, with a manual, pneumatic, or Once tripped, line tension or just the weight of the slack line
electrically-controlled hydraulic system. releases the hook, and the line falls free. The hook is then
The hooks are designed to swing freely 180 degrees horizontally manually returned to its working position.
and 45 degrees vertically to maintain a straight pull on the
mooring lines at all times. Every hook features a safety latch to STANDARD SIZES:
prevent accidental opening, and all models can be certified by 10-TON 25-TON 50-TON 60-TON 80-TON
the agency of your choice, including ABS and DNV. They can 100-TON 150-TON 200-TON 400-TON

One of the largest inventories of marine equipment and supplies


in the United States – ask for our FREE illustrated catalog.
WASHINGTON CHAIN & SUPPLY, INC.
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124
Phone: (206) 623-8500 • FAX: (206) 621-9834 • E-mail: info@wachain.com
VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
0023-03 4/23/06 9:16 PM Page 1

34-06

SKOOKUM
HORIZONTAL DECK SHEAVES

• Timken® sheave bearings. Bronze bushed optional


• “Stressproof” steel pins
• Heavy duty, extra wide manganese steel sheaves
• Available for wire and synthetic rope
• Will withstand the breaking strength of the specified wire
rope at 90° angles
WIRE
MODEL NO. ROPE A B C D E F G H I J K L LBS.
SIZE KG
in. 1 max 10 8 5-1/2 4 7-3/4 7-3/4 17 2-1/4 200
DS-10W-O
mm 25 max 254 203 140 102 197 197 432 57 90
in. 1-1/4 max 16 10 7 5 10 12 27 2 360
DS-16W-O
mm 32 max 406 254 178 127 254 305 686 51 163
in. 1-1/4 max 16 10 7 5 10 12 37-1/4 2 2 14-1/4 13 8 570
DS-16W-R
mm 32 max 406 254 178 127 254 305 946 51 51 362 330 203 259
in. 1-3/8 max 24 18-1/2 7 5-1/8 10-1/4 18 35 2 621
DS-24W-O
mm 35 max 610 470 178 130 260 457 889 51 282
in. 1-1/2 max 30 24-1/2 7 5-1/4 10-1/2 22 41 2 1000
DS-30W-O
mm 38 max 762 622 178 133 267 559 1041 51 454

ROLLER FAIRLEADS
• Alloy steel rollers, heat treated • “Stressproof” steel pins
• Bronze bushings • Bolt down bases

WIRE VER- HORI- OPEN- NO.


MODEL NO. ROPE TICAL ZONTAL ING A B C D E F G ROLLER BOLT LBS.
SIZE ROLLER ROLLER WxH PIN HOLES KG
in. 5/16 - 3/8 2-1/4 x 6-1/2 2-1/4 x 6-1/2 2-1/4 x 2-1/4 12 5-1/4 8-3/16 10-1/4 3-7/8 1/2 25/32 1 52
RF-0 4
mm 8 - 10 57 x 165 57 x 165 57 x 57 305 133 208 260 98 13 20 25 24
in. 5/8 - 7/8 4 x 11-3/8 4 x 11-3/8 2-3/4 x 2-3/4 17-1/2 10-1/2 13-1/8 15 8 3/4 1-1/16 1-3/8 235
RF-1 4
mm 16 - 22 102 x 289 102 x 289 70 x 70 444 267 333 381 203 19 27 35 107
in. 1 - 1-1/4 6 x 15-3/8 5 x 11 5x4 26 17 18-1/2 22 12-1/2 1-1/8 1-17/32 1-1/2 700
RF-2 4
mm 25 - 32 152 x 391 127 x 279 127 x 102 660 432 470 559 318 29 39 38 318
in. 1-3/4 8 x 22-1/2 8 x 22-1/2 6-1/2 x 6-1/2 36-3/4 23 27-1/8 31 8 1-1/2 1-13/16 3 2400
RF-3 6
mm 44 203 x 572 203 x 572 165 x 165 933 584 689 787 203 38 46 76 1089

P. O. Box 280
Hubbard, OR 97032
Tel: (503) 651-3175
An Ulven Company (800) 547-8211
Manufacturer of Skookum Blocks, Skookum Alloy Shackles, Fax: (503) 651-3409
and Custom-Designed Marine Products E-mail: skookum@ulvencompanies.com
Also available: Balanced Head Fairleads, Vertical & Horizontal Deck Lead Sheaves Web: www.skookumco.com
0031-04 4/23/06 9:17 PM Page 1

35-06

SKOOKUM

VERTICAL LEAD SHEAVES


Suggested Sheave Pin A B C D
Model No. Wire Rope Dia. Dia. Width Length Center Base
Size of Pin Thickness
in. 1/4 - 3/8 4 3/4 4 6 3 1/2
VLS-4 mm 6-10 101 19 102 152 76 13
in. 5/16- 1/2 6 1 4 8 4-1/2 1/2
VLS-6 mm 8-13 152 25 102 203 114 13
in. 3/8 - 5/8 8 1-1/2 6-1/2 10 6 5/8
VLS-8 mm 10 - 16 203 38 165 305 152 19
in. 1/2 - 3/4 12 2 9-1/2 16 8 7/8
VLS-12 mm 13 - 19 305 51 241 406 203 22
in. 5/8 - 3/4 14 2-1/2 9-1/2 16 9 7/8
VLS-14 mm 16 - 19 356 64 241 406 229 22
in. 3/4 - 1 16 2-1/2 10 18 10-1/2 7/8
VLS-16 mm 19 - 25 406 64 254 457 267 22
• Bronze bushed sheaves. Roller bearings optional
• “Stressproof” steel pins in. 3/4 - 1 18 2-1/4 11 19 12-1/2 1
VLS-18 mm 19 - 25 457 56 279 483 318 25
• Steel sheaves standard, other materials optional in. 1 - 1-1/4 20 2-1/2 13 22 13-1/2 1
• Weld-down or bolt-down bases VLS-20 mm 25 - 32 508 64 330 559 343 25
• Will withstand the breaking strength of the in. 7/8 - 1-1/4 24 2-3/4 16-1/2 26 15 1
VLS-24 mm 22 - 32 610 70 419 660 381 25
specified wire rope at 90° angles in. 1-1/4 - 1-3/8 30 3-3/4 16-1/2 37 18 1-1/4
• Available on request: VLS-30 mm 32 - 35 762 95 419 940 457 32
– sheave sizes above 42” in. 1-3/8 - 1-3/4 36 7-1/2 22 40 21 1-1/2
VLS-36 mm 35 - 44 914 190 559 1016 533 38
– double sheave models in. 2 - 2-1/2 42 7 28 42 24 1-1/2
– custom dimensions VLS-42 mm 51 - 64 1067 178 711 1067 610 38

HORIZONTAL LEAD SHEAVES

Suggested Sheave Pin A B C D


Model No. Wire Rope Dia. Dia. Width * Length Center of Base
Size Sheave Thickness
in. 3/8-1/2 8 1-1/2 12 10 1-3/8 5/8
HLS-8 mm 10 -13 203 38 305 254 35 16
in. 1/4 - 5/8 12 2 18 18 1-3/4 3/4
HLS-12 mm 6 - 16 305 51 457 457 44 19
in. 5/8 - 3/4 14 2 19 19 2-1/4 7/8
HLS-14 mm 16 - 19 356 51 483 483 57 22
in. 3/4 - 7/8 16 3-1/2 21 21 2-1/2 7/8
HLS-16 mm 16 - 19 406 89 533 533 64 22
• Bronze bushed sheaves. Roller bearings optional in. 7/8 - 1 18 3-1/2 28 28 2-1/2 1-1/8
HLS-18 mm 22 - 25 457 89 711 711 64 29
• “Stressproof” steel pins in. 1 - 1-1/4 20 4-1/2 22-1/2 23-1/2 2-3/4 1-1/4
• Steel sheaves standard, other materials optional HLS-20 mm 22 - 32 508 114 572 597 70 32
• Weld-down or bolt-down bases in. 1 - 1-1/4 24 4-1/4 28 29-3/4 2-3/4 1-1/4
HLS-24 mm 22 - 32 610 108 711 756 70 32
• Will withstand the breaking strength of the in. 1-1/4 - 1-1/2 30 6-1/2 38 38 4-1/4 1-1/2
specified wire rope at 90° angles HLS-30 mm 32 - 38 762 165 965 965 108 38
• Available on request: in. 1-1/4 - 1-1/2 36 4 48 48 3-1/2 1-1/2
HLS-36 mm 32 - 38 914 102 1219 1219 89 38
– sheave sizes above 42” in. 2 42 6-1/2 48 59 3-7/8 2
– double sheave models HLS-42 mm 51 1067 165 1219 1499 98 51
– custom dimensions * The A dimensions for HLS-8 through HLS-18 are for bolt-down style.

P. O. Box 280
Hubbard, OR 97032
Tel: (503) 651-3175
An Ulven Company (800) 547-8211
Manufacturer of Skookum Blocks, Skookum Alloy Shackles, Fax: (503) 651-3409
and Custom-Designed Marine Products E-mail: skookum@ulvencompanies.com
Also available: Balanced Head Fairleads, Vertical & Horizontal Deck Lead Sheaves Web: www.skookumco.com
0034-03 4/23/06 9:18 PM Page 1

36-06

SMITH BERGER MARINE, INC.


Vertical Guide Sheaves

Model Units of Maximum Wire Breaking Sheave Tread


Number Measure Wire Size Strength Diameter A B C D E Weight
MC-1124 Inches 2 344,000 lbs. 20 24 18 29 25-1/4 11 625 lbs.
MM 51 1530 kN 508 610 457 737 641 279 283 Kg
MD-1130 Inches 2-1/4 494,000 lbs. 24-7/8 30 23 35-3/8 31-1/16 13-9/16 1250 lbs.
MM 57 2198 kN 632 762 584 899 789 786 567 Kg
MC-1136 Inches 2-1/2 524,000 lbs. 30 36 27 43-1/2 37-3/4 16-1/4 3100 lbs.
MM 64 2331 kN 762 914 686 1105 959 413 1406 Kg
MD-1152 Inches 3 818,000 lbs. 44 52 39 60 53 23-1/2 4900 lbs.
MM 76 3639 kN 1118 1321 991 1524 1346 597 2223 Kg
MD-1168 Inches 3-1/4 1,223,775 lbs 59-1/16 78-1/16 46 73-5/8 70-3/8 31-1/16 6020 lbs.
MM 83 5444 kN 1500 1983 1168 1870 1788 789 2731 Kg
Standard Features
• Designed for breaking strength of wire with 90° wrap on sheave • Weld down base
• Sealed grease lubricated Timken tapered roller bearings • Removable guide roller
• Hardened rope grooves for longer life

Horizontal Guide Sheaves

Model Units of Maximum Wire Breaking Sheave Tread


Number Measure Wire Size Strength Diameter A B C D Weight
MC-1222 Inches 1-3/4 266,000 lbs. 18-1/2 41 22 8-1/2 3-1/2 880 lbs
MM 44 1183kN 470 1041 559 216 89 399 Kg
MC-1224 Inches 2 344,000 lbs. 20 43 25 8-1/2 3-5/8 975 lbs
MM 51 1530 kN 508 1092 635 216 92 442 Kg
MC-1230 Inches 2-1/4 494,000 lbs. 24-7/8 45 30-5/8 11-1/2 4-1/8 1500 lbs
MM 57 2198 kN 632 1143 778 292 105 680 Kg
MC-1236 Inches 2-1/2 524,000 lbs. 30 55 37 13 5-3/4 2800 lbs
MM 64 2331 kN 762 1397 940 330 146 1270 Kg
MD-1252 Inches 3 818,000 lbs. 44 83-1/2 53 14 6-1/4 6000 lbs
MM 76 3639 kN 1118 2121 1346 356 159 2722 Kg
MD-1268 Inches 3-1/4 1,223,775 lbs 59-1/16 100 70 17 7 8000 lbs
MM 83 5444 kN 1500 2540 1778 432 178 3629 Kg
Standard Features
• Designed for breaking strength of wire with • Hardened rope grooves for longer life
90° wrap on sheave • Weld down base
• Grease lubricated bronze bearings
Vertical and Horizontal Guide Sheaves Optional Features
• Multiple Sheaves • Special sheaves for high • Timken or bronze bearings
• Bolt down base performance ropes • Third party certification
• Load monitoring system • Painted to specification

Smith Berger Marine, Inc. See our page Contact us for information on additional
7915 10th Ave., S., Seattle, WA 98108 in the sizes for use with smaller wire ropes. Our
advertising section
Tel. 206.764.4650 • Fax 206.764.4653 for more engineering and manufacturing experience
E-mail: sales@smithberger.com of our allows us to customize any of our products
standard products!
Website: www.smithberger.com to suit YOUR requirements.
0035-03 4/23/06 9:18 PM Page 1

37-06

SMITH BERGER MARINE, INC.

Deck Mounted Balanced Head Fairleads

Model Units of Maximum Wire Breaking Sheave Tread


Number Measure Wire Size Strength Diameter A B C D E F Weight
MD-610 Inches 3/4 58,800 lbs. 8-1/4 23-11/16 16 20-1/8 14-3/4 11 4-1/2 270 lbs.
MM 19 262 kN 210 602 406 511 375 279 114 122 Kg
MD-612 Inches 1 103,400 lbs. 9-3/4 28-3/16 19-1/4 24-5/8 17-3/4 13-1/2 5-5/8 495 lbs.
MM 25 460 kN 248 716 489 625 451 343 143 225 Kg
MD-614 Inches 1-1/4 159,800 lbs. 11-1/4 30-9/16 20 28-1/8 18-1/2 15-1/2 6-5/16 670 lbs.
MM 32 711 kN 286 776 508 714 470 394 160 304 Kg
MD-618 Inches 1-1/2 228,000 lbs. 14-1/4 38-1/8 25-1/4 36-1/4 21 19-1/2 8-1/2 1450 lbs.
MM 38 1014 kN 362 968 641 921 533 495 216 658 Kg
MC-622 Inches 1-3/4 266,000 lbs. 18-1/2 45-1/8 28-1/2 45-1/2 22 23-1/2 9-1/2 2100 lbs.
MM 44 1183kN 470 1146 724 1156 559 597 241 953 Kg
MC-624 Inches 2 344,000 lbs. 20 50-1/8 30 44-13/16 27 25-1/2 12 2650 lbs.
MM 51 1530 kN 508 1273 762 1138 686 648 305 1202 Kg
MD-630 Inches 2-1/4 494,000 lbs. 24-7/8 56-7/8 40-1/4 60-3/4 27-1/2 31-1/2 13 4800 lbs.
MM 57 2198 kN 632 1445 1022 1543 699 800 330 2177 Kg
MC-636 Inches 2-1/2 524,000 lbs. 30 63 40 70-1/4 27-1/2 36-1/4 14-1/2 6000 lbs.
MM 64 2331 kN 762 1600 1016 1784 699 921 368 2722 Kg
MD-652 Inches 3 818,000 lbs. 44 103-1/2 52-3/8 104 44 34-1/2 26-1/2 16,500 lbs.
MM 76 3639 kN 1118 2629 1330 2642 1118 876 673 7484 Kg
MD-665 Inches 3 818,000 lbs. 55-1/2 115-5/8 52-3/8 117-1/2 44 34-1/2 26-1/2 18,800 lbs.
MM 76 3639 kN 1410 2937 1330 2985 1118 876 673 8528 Kg

Standard Features
• Designed for breaking strength of wire with 90° wrap • Hardened rope grooves for longer life
on sheave and +/- 90° rotation of swivelhead • Weld down base
• Sealed grease lubricated Timken tapered • Removable guide roller
roller bearings

Optional Features
• Tail Sheaves / Tail Rollers • Load monitoring system • Painted to specification
• Bolt down base • Special sheaves for high • Third party certification
performance synthetic ropes

Smith Berger Marine, Inc. See our page STOCKING DISTRIBUTORS:


in the Rasmussen Equipment Co., Seattle, WA — 206-762-3700
7915 10th Ave., S., Seattle, WA 98108 advertising
Tel. 206.764.4650 • Fax 206.764.4653 section for Rasmussen Equipment Co., Belle Chasse, LA — 504-392-0442
more of our Waterman Supply Co., Inc., Wilmington, CA — 310-522-9698
E-mail: sales@smithberger.com standard
Website: www.smithberger.com products! Anchor Marine & Supply Co., Houston, TX — 713-644-1183
0036-04 4/25/06 10:09 AM Page 38

38-06

NABRICO MARINE PRODUCTS

MANUAL WINCHES
• All steel construction
• Machine cut gears and ratchets
• Bronze bushed bearings
• Alemite fittings for proper lubrication
• True right and left hand models for use in pairs
• Positive no-slip tension
• Fast cranking with handle
• Quick release action
• Hand brake for run-out control
• Lever ratchet for extra high tension
Line Pull (1)
Ratchet with Mounting Dimensions
Dog Standard
Model Holding Handwheel Extension
DF-156 (1) One Man One Man
S. Tons Lbs. Lbs.
10-6-M 10 5,200 7,000
20-7-M 20 14,000 14,400
40-11-M 40 14,000 17,800
40-18-M 40 14,000 17,800
60-11-M 60 24,000 28,800
(1)
Hold and line pull ratings are for first layer of cable.

Model Weight
DF-156 A B C D E F G (Lbs)
10-6-M 1' 7-7/16" 9-13/16" 2' 1" 3' 0" 3' 4-3/4" 1' 9" 2' 7-7/8" 500
20-7-M 2' 0-1/4" 14-1/2" 1' 11-15/16" 3' 0" 3' 3-5/16" 2' 6" 3' 1" 850
40-11-M 2' 5-1/64" 1' 7-1/2" 2' 3-1/4" 3' 9" 3' 11-1/2" 3' 0" 3' 9-1/4" 1250
40-18-M 3' 0-1/4" 2' 2-1/2" 2' 3-1/4" 3' 9" 3' 11-1/2" 3' 0" 3' 9-1/4" 1350
60-11-M 2' 8-7/8" 1' 10-1/2" 2' 10-1/4" 4' 6-7/16" 4' 10-1/2" 3' 10-7/8" 2' 9-1/16" 2100

Model BASE DIM. APPROX. DRUM RATING


WT. CAPACITY
PARKER SR-100 30’ of 1”
TOWING SL-100 16” x 24” 800 lbs. wire rope 10 tons
WINCHES LR-250 65’ of 1”
LL-250 20” x 24” 850 lbs. wire rope 25 tons

E-mail: sales@timcomarine.com • www.nabrico-marine.com


0037-04 4/24/06 11:03 PM Page 1

39-06

NABRICO MARINE PRODUCTS


POWER WINCHES
ELECTRIC WINCH
• Proven holding capacity certified by independent testing laboratory.
• Ball bearings on high speed shaft and large bronze bushings with grease fittings
on all other shafts.
• Oversized sprockets and chain.
• Precision machined side plates, gears and shafts to maintain proper gear tooth
engagements and minimize wear.
• Improved cable attachment and solid drum gear.
• Totally enclosed 5 horsepower crane and hoist electric motor with high efficiency
gear box attached.
• Free-wheeling feature to allow faster cable pull out.
• Provisions for emergency manual operation from three locations. One location
utilizes the entire winch gear reduction.
• Mechanical locking dog for emergency use in case of motor brake failure.
• Electrical brake can be manually operated in case of motor or power failure.
• Cable guard prevents cable damage from gears.

Line Pull @ First Layer of Cable


40 Ton – 429:1 Ratio, 30 Ton – 343:1 Ratio 18.6:1 Ratio Dimensions
Model @ Rated @ Motor Hand Crank Hand Crank
DF-500 Holding Brake Amps Stall @Motor Shaft @ Top Shaft W L H
S. Tons Lbs. Lbs. Lbs. Lbs.
40-11-14 40 14,000 24,000 15,000 2,500 1' 9" 3' 8" 3' 5-1/4"
30-7-15 30 13,000 24,000 22,000 4,000 1' 3-3/8" 2' 1-1/2" 4' 4-1/4"

HYDRA-ELECTRIC WINCH
• Pilot house and/or deck push button control.
• Self-contained electric-hydraulic package. Quick installation.
• Run electric wire to source. No piping required.
• Automatic brake. Spring loaded, noiseless. Can be released for hand operation.
• Simple instant reversing by hydraulics.
• Standard C Face, 1750 RPM enclosed (T.E.F.C.) electric motor.
• Mechanical holding dog for emergency use. Positive.
• Machine cut gears, more efficient.
• Ball bearings on high speed shaft and large bronze bushings with
grease fittings on all other shafts.
• Cable guard prevents cable damage from gears.
• Provisions for emergency operation by hand.

Holding Brake Line Pull


and/or Dog Hydra-Elec. Handwheel
Model (1) Rated (2) Max. One Man Dimensions
DF-156 S. Tons Lbs. Lbs. Lbs. W L H
10-6HE 10 2272 @ 830 psi 3150 @ 1119 psi 7,000 10-5/16" 1' 10-1/8" 3' 6-3/8"
20-7HE 20 9382 @ 1138 psi 11700 @ 1381 psi 14,000 1' 3-1/2" 2' 6" 3' 5"
40-11HE 40 17213 @ 1695 psi 18000 @ 1797 psi 15,000 1' 8-1/8" 3' 0" 3' 4"
60-11HE 60 31771 @ 1998 psi 33,480 @ 2105 psi 24,000 1' 11-1/8" 3' 10-7/8" 4' 3"
(1) Holding & line pull ratings are for first layer of cable. (2) Hydra-Electric line pull pressures are pre-set for RATED condition.

NABRICO MARINE PRODUCTS


MANUFACTURERS OF HIGH QUALITY DECK HARDWARE
P.O. BOX 239, NASHVILLE, TN 37202 • PHONE: 615-244-2050
FAX: 615-442-1313 • E-MAIL: nabrico@hotmail.com • www.nabrico-marine.com
3030- 04 4/24/06 11:05 PM Page 1

40-06

NABRICO MARINE PRODUCTS


ANCHOR WINCHES

• Hydraulic or electric motor with fail safe motor brake


• 4-way control valve mounted and piped on the winch
• Manually operated band brake with stainless steel brake
and steel hand wheel
• Lever operated machined jaw clutch
• Wire rope level wind for uniform lay of wire on the drum
• Ratchet and pawl type holding dog on the drum
DF-AW-1200-30-2/16H DF-AW-1000-30-1/16E
Cable Size 1-7/8 inch 1-5/8 inch
Drum Capacity 1200 ft. 1000 ft.
Line Pull (First Layer) 25,000 lbs. 15,000 lbs.
@ PSI 2400
Line Speed 30 FPM 30 FPM
Drive Hydraulic Electric
Heads Two One
Head Size 16 inch 16 inch

CAPSTANS

• Vertical thru-deck or above deck models


• Fabricated steel construction
• Polished steel capstan head
• Head size to 36” diameter
• Single or variable speeds available
• Line pull up to 100,000 lbs. Electric
• Static or bollard pull up 300,000 lbs.
• Zinc and epoxy coatings for full marine
environment protection
• Planetry or worm and spur gearing

DF-C-18-1-5-30 HC DF-C-18-2-12/40-6/80 E
Head Size 18 inch 18 inch
No. of Speeds One Two
Line Pull 5,000 lbs. 12,000 lbs. / 6,000 lbs.
Line Speed 30 FPM 40 FPM / 80 FPM
Drive Hydraulic Electric Hydraulic

Custom Made – Many Other Sizes & Features Available


NABRICO MARINE PRODUCTS
P.O. BOX 239, NASHVILLE, TN 37202 • PHONE: 615-244-2050
FAX: 615-442-1313 • E-MAIL: nabrico@hotmail.com • www.nabrico-marine.com
Neuhaus 596 4/29/06 5:39 PM Page 1

41-06

J.D. NEUHAUS L.P.


AIR WINCHES
From 1100 Lbs. To 6600 Lbs. Capacity • Air Pressure 6 Bar (85 PSI)
LIFTER 500/800 LIFTER 1200/2000 & PULLER 1800/3000

Model 1800

LIFTER LIFTER PULLER 1200/1800 LIFTER PULLER 2000/3000


Dimensions
Model 3000 500/800 short drum long drum short drum long drum
inch 21.26 15.47 18.70
B
mm 540 393 475
• Drum integrated exhaust air-cooled planetary gear inch 16.93 21.26 23.23
H Max.
mm 430 540 590
• High rope capacity at a 4-layer spooling L1
inch 20.08 23.03 30.91 27.56 43.31
mm 510 585 785 700 1100
• Ratio of rope/drum diameter (factor 21) ensures the inch 11.42 8.5 16.37 12.00 27.75
rope’s long duty cycle L2
mm 290 216 416 305 705
inch 5.51 / 6.29 9.44 11.22
• Variable speeds D1
mm 140 / 160 240 285
• Low noise level inch 9.44 13.78 16.93
D2
mm 240 350 430
• Integrated overload protection inch 9.69 11.61 13.39
A1
mm 246 295 340
• Suitable for applications in hazardous areas
inch 12.52 12.28 20.16 17.68 33.43
A2
mm 318 312 512 449 849

LIFTER LIFTER PULLER


Type
500 800 1200 2000 1800 3000
Air pressure PSI / bar 85 / 6
Max. number of rope layers 4 3 4
Max. motor power kW 2.2 2.6 2.2 2.6
Air connection G 3/4 G1 G 3/4 G1
inch 0.75 / 1.22 0.98 / 1.54 0.75 / 1.22 0.98 / 1.54
Hose size (inside dia. / outside dia.)
mm 19 / 31 25 / 39 19 / 31 25 / 39
Air consumption at nominal load, pulling cfm / m3 /min 120.6 / 3.4 141.8 / 4.0
Air consumption at nominal load, lifting cfm / m3 /min 120 / 3.4 123.6 / 3.5 130.7 / 3.7 151.9 / 4.3
Air consumption without load cfm / m3 /min 151.9 / 4.3 155.4 / 4.4 169.5 / 4.8 155.4 / 4.4 169.5 / 4.8
Air consumption at nominal load, lowering cfm / m3 /min 91.8 / 2.6 123.6 / 3.5 169.5 / 4.8 183.6 / 5.2
Max. possible rope diameter inch / mm 0.28 / 7 0.39 / 10 0.39 / 10 0.51 / 13 0.39 / 10 0.51 / 13
Minimum braking force of rope lbf / kN 5510 / 24.5 8820 / 39.2 13230 / 58.8 22070 / 98.1 11920 / 53.0 19850 / 88.3
Weight (without rope & additional devices)1 lbs / kg 176.4 / 80 187.4 / 85 304.2 / 138 518.1 / 235 304.2 / 138 518.1 / 235
Control length for pendant control ft / m 6.56 / 2
Noise pressure level without load
- lifting or pulling2 dB (A) 85 87 88 87 88 87
- lowering or unwinding2 dB (A) 80 86 90 88 90 88
Noise pressure level at nominal load
- lifting or pulling2 dB (A) 83 89 86 85 82 80
- lowering2 dB (A) 89 92 88
Standard version 2Measured at 1m distance according to DIN 45635
1

J. D. Neuhaus L. P. 65 PSI Version


P. O. Box 1155_9 Loveton Circle_Sparks, Maryland 21152 Also Available
410.472.0500_fax: 410.472.2202_800.331.2889_email: info@jdneuhaus.com
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
0031-03 4/23/06 9:23 PM Page 1

42-06

MARQUIP MARINE EQUIPMENT

CARPENTER STOPPER
Compact design cable grip for cable sizes from 3/8” to 3”. Working load limit
exceeds that of matching cable size. Hinged body has fixed smooth groove on
one side; movable wedge, grooved with lay of cable, on the facing side. Movable
wedge enables cable to be drawn tight. Cable can be released while under full
tension by releasing latch on hinged lid. Lid is securely latched with pin while
in use. Shackle holes are provided for rigging bridle to stopper. Bridles available
with stoppers if desired.

3-S MARINE TOW PLATES CAST NICKEL CHROME STEEL


These tow plates enable bridle to be rigged with only three shackles. An additional hole is provided in the
larger No. 2 and No. 3 size tow plates for a tandem shackle to tow additional barges, or to haul in the bridle.
Tow plates will be certified if requested.
2-1/4” No. 1 No. 3
1-3/4” 4”
2-3/16”
2”R
1-1/2”R 2-1/
6”R 2”R

5-1/2”

16”
5-1/4” No. 2 3”
10-1/8” 10”

3-3/4”R 1”R
4” 31-1/2”
2-3/16”R
/4”

10”
5-1

2-1/4”
2”R

7-5/16”
1-1/2”R 7” 6”R 4-3/8”
5-3/4” 4-1/2”
2”R
17-1/2” 23-1/2” 15-1/2”
2”
31”
7” 4-5/8” Dia. Core Hole

2”R
3-1/2” 3-1/4”

11-1/4”

22-1/2”

3-1/8” Dia. Core Hole

TOW PLATE SPECIFICATIONS


No. 1 No. 2 No. 3
Shackle Sizes 1-1/2”, 1-3/4”, 2” 2-1/4”, 2-1/2”, 2-3/4”, 3” 3”, 4”
Dimensions 17-1/2” x 16” 22-1/2” x 23-1/2” 31” x 31-1/2”
Weight 70 lbs. 170 lbs. 548 lbs.
Proof Test 300,000 lbs. 485,000 lbs. 624,000 lbs.

When you want the


very best quality
marine equipment
ask for it by name:

P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124 • Phone (206) 623-8500 • Fax (206) 621-9834
E-mail: info@wachain.com • VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
0043-03 4/23/06 9:23 PM Page 1

43-06

ANCHOR MARINE & INDUSTRIAL SUPPLY, INC.

HALL ANCHOR
WT. A B C D F Wt. A B C D F
kg mm mm mm mm mm kg. mm mm mm mm mm
50 575 410 184 300 15 3060 2261 1596 720 1172 80
75 660 480 210 340 15 3300 2330 1636 734 1180 80
100 723 510 230 375 20 3540 2336 1650 674 1210 80
125 780 550 245 405 20 3780 2679 1844 733 1295 80
150 835 580 264 430 20 4050 2466 1740 712 1278 90
180 888 625 281 454 20 4320 2667 1790 763 1290 90
200 915 645 290 470 25 4590 2784 1889 780 1384 90
225 950 670 300 493 25 4890 2923 2011 804 1413 100
240 985 694 312 510 25 5250 2728 1910 846 1364 100
275 1020 710 322 527 25 5510 2788 1952 864 1394 100
300 1050 738 330 543 30 6000 3270 2033 829 1625 110
325 1075 758 338 557 30 6450 2920 2048 906 1461 110
360 1190 778 346 570 30 6900 2930 2064 932 1612 110
400 1150 810 360 595 30 7350 3072 2150 950 1636 120
420 1175 826 368 607 30 7800 3113 2179 965 1556 120
450 1200 845 373 620 35 8300 3208 2246 995 1604 120
480 1220 860 380 630 35 8700 3253 2270 1005 1626 130
500 1240 875 386 640 35 8900 3268 2275 1012 1634 130
570 1280 904 400 660 40 9300 3301 2311 1023 1650 130
600 1320 930 410 680 40 9900 3330 2360 1045 1685 140
660 1360 955 420 700 40 10200 3338 2372 1070 1694 140
700 1390 980 430 715 45 10500 3438 2407 1075 1719 140
750 1425 1000 440 730 45 11100 3502 2452 1086 1751 140
780 1450 1030 450 750 45 11700 3565 2495 1105 1780 150
850 1480 1050 460 765 50 12300 3600 2520 1140 1800 150
900 1490 1053 480 772 50 12900 3681 2577 1141 1840 150
950 1520 1072 484 787 50 13500 3738 2616 1159 1869 160
1020 1545 1090 496 800 55 14100 3793 2655 1176 1896 160
1140 1600 1126 512 825 55 14700 3845 2690 1190 1925 160
1200 1650 1165 530 855 55 15400 3880 2716 1210 1940 170
1290 1670 1180 535 865 60 16100 3964 2775 1229 1982 170
1350 1700 1205 550 890 60 16900 4030 2820 1250 2015 170
1440 1800 1245 555 895 65 17800 4099 2869 1270 2049 180
1590 1890 1260 565 900 65 18800 4175 2920 1295 2085 180
1740 1910 1290 582 945 65 20000 4262 2985 1320 2130 180
1920 1930 1362 616 999 70 21500 4365 3055 1355 2180 200
2100 2020 1407 623 1020 70 23000 4465 3125 1385 2230 200
2280 2040 1446 640 1033 70 24500 4560 3190 1415 2280 200
2460 2120 1483 667 1076 75 26000 4651 3255 1442 2325 220
2640 2170 1519 672 1085 75 27500 4720 3315 1470 2370 220
2850 2200 1540 700 1140 75 29000 4825 3375 1495 2410 220

P.O. Box 58645


Houston, Texas 77258
Telephone: 713-644-1183
Fax: 713-644-1185
MARINE & INDUSTRIAL SUPPLY, INC. www.anchormarinehouston.com
TOLL FREE (800) 233-8014 sales@anchormarinehouston.com
0042-04 4/23/06 9:24 PM Page 1

44-06

WASHINGTON CHAIN & SUPPLY, INC.

STOCKLESS ANCHOR
Anchor Head Shank Proof
Weight No. No. A B C D E F G H J Test
200 2 2 27 18 9-1/2 15-1/8 5-1/8 5-1/2 1 5 4 8300
300 4 3 32 23-1/4 11-11/16 17/16 6-11/16 5-1/2 1 5 4-1/2 10900
400 6 3 32 25-3/4 13 19 7 5-1/2 1 5 4-1/2 13000
500 8 4 35 26-1/2 14 20 7 7 1-1/4 6 5-1/2 15000
700 12 5 38 29-1/2 15-5/8 23-1/2 8-1/8 7 1-1/4 6 5-3/4 18700
775 13 5 38 32 16-7/8 24-3/4 8-5/8 7 1-1/4 6 5-3/4 20050
900 15 7 42 32 17 24 9 7-1/2 1-1/2 6-1/2 6-1/2 22300
1000 16 7 42 33-5/8 18 25-1/8 9-3/4 7-1/2 1-1/2 6-1/2 6-1/2 24100
1260 18 8 46 36-3/8 18-3/4 28-3/4 9-7/8 8-1/2 1-3/4 7-1/2 6-3/4 28800
1430 20 9 49 39 20 28-7/8 10-3/4 9-1/4 2 8-1/2 7 31700
1540 21 9 49 40 20-1/2 30-1/2 11 9-3/4 2 8-1/2 7 33600
1600 22 9 49 40 20-1/2 30-1/2 11 9-3/4 2 8-1/2 7 34600
1750 23 10 52 41-1/2 21 33-1/4 11-3/8 9-3/4 2 8-1/2 7-1/4 37150
1875 24 10 52 43 22 34-3/4 12 9-3/4 2 8-1/2 7-1/4 38400
1950 25 10 52 43 22 34-3/4 12 9-3/4 2 8-1/2 7-1/4 40550
2100 26 12 58 44-3/4 23 35-3/4 12-1/8 9-3/4 2 8-1/2 7-1/2 43050
2500 28 12 58 44-3/4 23-1/4 35-3/4 12-1/8 9-3/4 2 8-1/2 7-1/2 49650
2800 30 12 58 48 25 35-7/8 13 9-3/4 2 8-1/2 7-1/2 54500
3000 31 14 64 47 25-1/2 36 12-3/4 12 2-1/2 10 8-3/4 57700
3500 33 14 64 52-3/4 27-1/2 39-1/2 14-1/4 12 2-1/2 10 8-3/4 65200
4000 35 15 70-5/8 53-1/4 27-1/2 39-1/4 14-1/2 12 2-1/2 10 9-1/2 72600
4500 37 15 70-5/8 56-3/4 29 42 15 12 2-1/2 10 9-1/2 79700
5000 39 18 76 57-1/2 30 42 15-5/8 15 3 12 10-1/4 86500
6000 43 18 76 63-1/2 33-1/4 47 17-1/4 15 3 12 10-1/4 99100
G J
6300 44 18 76 63-1/2 33-1/4 47 17-1/4 15 3 12 10-1/4 102700
6500 45 20 82 63-1/2 33 47-5/8 17-1/4 15 3 12 10-3/4 105100
F 6750 46 20 82 65 33-3/4 48-3/4 17-5/8 15 3 12 10-3/4 107900
7000 47 20 82 66-5/8 34-3/4 49-3/4 18 15 3 12 10-3/4 110700
7600 48 20 82 67-1/2 34-3/4 49-3/4 18-3/8 15 3 12 10-3/4 117300
8100 49 22 93-1/2 68-1/4 34-3/4 48-7/8 18-1/4 17 3-1/2 13-1/4 11-1/2 122500
8600 50 22 93-1/2 68-1/2 35-3/4 50-1/2 18-1/2 17 3-1/2 13-1/4 11-1/2 127500
E E
9000 51 23 96 70-1/4 36-3/4 51-3/4 19-1/8 17 3-1/2 13-1/4 11-1/2 131400
A 10000 53 24 96 75-1/2 39 58 21 19 4 14-3/4 12 140400
11000 53 24 96 75-1/2 39 58 121 19 4 14-3/4 12 148500
D 12000 56 24 96 76-3/4 40 58 21-3/4 19 4 14-3/4 12 156100
13000 56 26 98 76-3/4 40 58 21-3/4 19 4 14-3/4 12 163500
14000 59 27 103 80-1/2 44 60 22-1/4 19 4 14-3/4 13 170500
15000 60 28 103 86 46 65 24 19 4 14-3/4 13 176800
16000 62 30 108 86 46 65 24 19 4 14-3/4 13 182800
18000 64 32 112 88-1/4 48-1/4 65-5/8 24-3/4 22 4-1/2 16-3/4 13 194200
18900 64 32 112 88-1/4 48-1/4 65-5/8 24-3/4 22 4-1/2 16-3/4 13 198800
20000 66 34 112 96 50 72 26 22 4-1/2 16-3/4 14 204300
B 25000 67 35 120 103 53-3/4 77-1/2 28 22 4-1/2 16-3/4 15 227000
30000 69 37 128 110 57-1/4 82-1/2 29-7/8 24 5 18-3/4 16 247600
35000 70 38 135 116 60 87 31-1/2 25 5 19 17 265600
40000 71 39 140 121 63 91 32 26 5-1/2 20 17-1/2 278200
C 45000 72 40 147 126 65 94 34 27 5-1/2 21 18 287550
50000 73 41 152 131 68 99 35 28 6 21-1/2 19 292600
Dimensions above are in inches, anchor weight in pounds.
Certified drawings of anchors listed above, and of intermediate and larger sizes, will be furnished on request.

One of the largest inventories of marine equipment and supplies


in the United States – ask for our FREE illustrated catalog.
WASHINGTON CHAIN & SUPPLY, INC.
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124
Phone: (206) 623-8500 • FAX: (206) 621-9834 • E-mail: info@wachain.com
VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
0045-03 4/23/06 9:25 PM Page 1

45-06

WASHINGTON CHAIN & SUPPLY, INC.


R.W.T. ANCHOR
G

F J

E
A

B C

Anchor A B C D E F G H J Proof Test


Weight Pounds
8 20 19 5-5/16 11-1/2 7-1/4 1-11/16 3/8 1-1/2 1 300
16 25 23-3/4 7 14-1/2 9 2-1/8 1/2 1-7/8 1-1/4 560
30 30-3/4 28-3/4 8-3/4 17-1/2 11-3/8 2-1/8 1/2 1-7/8 1-3/8 1,000
50 34-3/4 33 9-15/16 20 12-7/8 2-7/8 5/8 2-3/8 1-5/8 1,500
75 38 36 11 22 14-3/8 3-1/2 3/4 2-1/2 2 2,070
100 41-1/2 39-1/2 12-3/16 24 15-5/8 3-3/4 7/8 3-3/8 2-1/4 2,600
150 46-3/4 44-1/2 13-11/16 27 17-3/8 5-1/2 1 4 2-3/8 4,200
200 47-1/2 45 14-3/16 29 18-7/8 5-1/2 1 4 3-1/8 5,200
250 47-1/2 45 14-9/16 29 18-7/8 5-1/2 1 4 3-1/8 6,275
300 53 50 16-1/8 32-1/2 21-1/4 7 1-1/4 5 3-1/4 7,355
350 53 50 16-11/16 32-1/2 21-1/4 7 1-1/4 5 3-1/4 8,325
400 57-1/2 54-1/4 17-3/4 35-1/4 23 7 1-1/4 5 3-1/2 9,300
450 60 56-1/2 18-3/8 36-3/4 24 7 1-1/4 5 3-3/4 10,275
500 61-1/2 58-1/2 19 37-1/2 24 7-1/2 1-1/2 6 4-1/4 11,250
750 69 64-1/2 21-1/8 42 28-7/16 7-1/2 1-1/2 6 4-7/8 15,500
1,000 75 71 24-1/2 46 29-1/4 9-3/4 2 8 5-1/4 18,800
2,000 92-1/2 85 30 56-1/2 37-1/4 12 2 9-1/2 7 32,500
3,000 108-1/2 104 34-3/4 66 40-3/8 15 3 11 7-3/4 45,000
4,000 116 110 37-1/2 71 44 15 3 11 9 57,500
5,000 118 112 38-3/4 72 44-3/4 17 3-1/2 12-1/2 9-1/2 69,500
6,000 124 118 41 76 47-3/4 19 4 14 10-1/4 81,500
7,000 124 118 41 76 47-3/4 19 4 14 10-1/4 92,375
8,000 128 121 43-1/2 78 50-1/4 19 4 14 12 103,250
9,000 133 126 45-1/4 81-1/8 52-1/4 19 4 14 12-1/2 114,125
10,000 144 137 49 88 55-1/4 22 4-1/2 16 13 125,000
11,000 144 137 49 88 55-1/4 22 4-1/2 16 13 135,660
12,000 146 138-1/2 49-3/4 89-1/8 57-3/8 22 4-1/2 16 13-3/4 147,335
13,000 154 146 52-1/2 94 60-1/2 24 5 17-1/2 14-1/2 157,900
14,000 154 146 52-1/2 94 60-1/2 24 5 17-1/2 14-1/2 163,000
15,000 157 149-1/4 53-5/8 96 61-7/8 24 5 17-1/2 14-7/8 170,000
16,000 161 152-1/2 54-7/8 98-1/4 63-1/4 24 5 17-1/2 15-1/8 176,000
17,000 164 155-1/2 56 100 64-1/2 24 5 17-1/2 15-1/2 183,000
18,000 167 158-1/2 57 102 65-5/8 24 5 17-1/2 15-3/4 189,000
19,000 170-1/8 161-3/8 58 104 66-3/4 25 5-1/2 20 16 195,500
20,000 173 164 59 106 68 25 5-1/2 20 16-3/8 220,000
25,000 195 186 67 119 75 30 6 22 18 220,000
30,000 208 198 71 127 80 32 6 23 19 220,000

One of the largest inventories of marine equipment and supplies


in the United States – ask for our FREE illustrated catalog.
WASHINGTON CHAIN & SUPPLY, INC.
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124
Phone: (206) 623-8500 • FAX: (206) 621-9834 • E-mail: info@wachain.com
VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
0044-04 4/23/06 9:26 PM Page 1

46-06

HIGH HOLDING POWER ANCHORS

SNUG STOWING ANCHOR

Weight A B C D E F G Proof
200 30-7/8 29-3/4 12 20-1/8 16-1/4 5-1/2 1 10,000
300 35-3/8 34 13-3/4 23 18-1/2 5-1/2 1 13,000
500 41-3/4 40-1/4 16-3/8 27-1/4 21-7/8 7 1-1/4 18,100
1,000 52-3/4 50-3/4 20-5/8 34-3/8 27-5/8 7-1/2 1-1/2 30,000
5,000 90-3/8 86-3/4 35-1/4 58-3/4 47-1/4 15 3 107,000
10,000 113-3/4 109-1/4 44-1/2 74 59-1/2 17 3-1/2 165,600
15,000 130 125 50-3/4 84-5/8 68 19 4 213,700
20,000 143-1/4 137-5/8 56 93-1/4 75 22 4-1/2 249,600
40,000 180 173 70 117 94 26 5-1/2 386,400

MOORFAST ANCHOR

Weight A B C D E F G Proof
1,000 61 75 19 37 25 9-3/4 2 30,000
3,000 88 109 27 54 37 15 3 72,500
8,000 122 153 38 75 51 17 3-1/2 145,600
10,000 131 157 41 80 55 19 4 165,600
14,000 147 177 45 90 61 19 4 205,000
16,000 153 187 48 94 64 22 4-1/2 222,900
20,000 164 196 51 102 69 22 4-1/2 249,600
30,000 187 217 59 118 79 24 5 320,000
40,000 214 248 63 127 86 26 5-1/2 386,400

U.S.N. LIGHT WEIGHT TYPE ANCHOR

Weight A B C D E F G Proof
200 47-1/2 45 14-1/4 29 18-7/8 5-1/2 1 10,000
500 61-1/2 58-1/2 19 37-1/2 24 7-1/2 1-1/2 18,100
1,000 75 71 24-1/2 46 29-1/4 9-3/4 2 30,000
5,000 118 112 38-3/4 72 44-3/4 17 3-1/2 107,000
10,000 144 137 49 88 55-1/4 22 4-1/2 165,600
15,000 157 149 53-5/8 96 61-7/8 24 5 213,700
20,000 173 164 59 106 68 25 5-1/2 249,600
30,000 198 189 67-1/2 121 78 29 5-1/2 319,400
40,000 218 240 75 131 86 32 6 386,400

Specify if a swivel shackle is required in lieu of standard shackle.

LISTER CHAIN & FORGE, INC.


®
3810 Loomis Trail Rd., Blaine, WA 98230, U.S.A.
Telephone: (360) 384-4749 • Fax: (360) 332-4247
SINCE 1911 e-mail: inquiries@listerchain.com • www.listerchain.com
0045-04 4/23/06 9:27 PM Page 1

47-06

LISTER CHAIN & FORGE, INC.

BUOY CHAIN
A C

WELD OVERAGE (TYP.) B

OVERALL LENGTH = 90 feet (27.4 meters) ± 3%

USCG –E/GICP-245

U.S.N. STOCKLESS ANCHORS

LISTER CHAIN & FORGE, INC.


®
3810 Loomis Trail Rd., Blaine, WA 98230, U.S.A.
Telephone: (360) 384-4749 • Fax: (360) 332-4247
SINCE 1911 e-mail: inquiries@listerchain.com • www.listerchain.com
0046-04 4/23/06 9:28 PM Page 1

48-06

LISTER CHAIN & FORGE, INC.

STUD LINK ANCHOR CHAIN


Grades 2 and 3

AMERICAN BUREAU OF SHIPPING

LISTER

LISTER

LISTER
APPROVED

CHAIN SIZE DIMENSIONS LOAD TEST REQUIREMENTS


Length Weight Grade 2a Grade 3a
Link Link over per 15
Inches mm Length Width 5-links Fmshot Proof Break Proof Break
A B L (approx.) Load Load Load Load
5/8 16 3-3/4 2-1/4 13-3/4 365 23745 33220 33220 47465
3/4 19 4-1/2 2-5/8 16-1/2 480 34000 47600 47600 68000
13/16 20 4-7/8 2-7/8 17-7/8 570 39800 55700 55700 79500
7/8 22 5-1/4 3-1/8 19-1/4 660 46000 64400 64400 91800
15/16 24 5-5/8 3-5/16 20-5/8 760 52600 73700 73700 105000
1 25 6 3-9/16 22 860 59700 83600 83600 119500
1-1/16 27 6-3/8 3-3/4 23-3/8 970 67200 94100 94100 135000
1-1/8 29 6-3/4 4 24-3/4 1080 75000 105000 105000 150000
1-3/16 30 7-1/8 4-1/4 26-1/8 1220 83400 116500 116500 167000
1-1/4 32 7-1/2 4-1/2 27-1/2 1350 92200 129000 129000 184000
1-5/16 33 7-7/8 4-3/4 28-7/8 1490 101500 142000 142000 203000
1-3/8 34 8-1/4 4-14/16 30-1/4 1630 111000 155000 155000 222000
1-7/16 36 8-5/8 5-3/16 31-5/8 1780 120500 169000 169000 241000
1-1/2 38 9 5-3/8 33 1940 131000 183500 183500 262000
1-9/16 40 9-3/8 5-5/8 34-3/8 2090 142000 198500 198500 284000
1-5/8 42 9-3/4 5-7/8 35-3/4 2240 153000 214000 214000 306000
1-11/16 43 10-1/8 6-1/6 37-1/8 2410 166500 229000 229000 327000
1-3/4 44 10-1/2 6-5/16 38-1/2 2590 176000 247000 247000 352000
1-13/16 46 10-7/8 6-1/2 39-7/8 2790 188500 264000 264000 377000
1-7/8 48 11-1/4 6-3/4 41-1/4 2980 201000 281000 281000 402000
1-15/16 50 11-5/8 7 42-5/8 3180 214000 299000 299000 427000
2 51 12 7-3/16 44 3360 227000 318000 318000 454000
2-1/16 52 12-3/8 7-7/16 45-3/8 3570 241000 337000 337000 482000
2-1/8 54 12-3/4 7-5/8 46-3/4 3790 255000 357000 357000 510000
2-3/16 56 13-1/8 7-7/8 48-1/8 4020 269000 377000 377000 538000
2-1/4 58 13-1/2 8-1/8 49-1/2 4250 284000 396000 396000 570000
2-5/16 59 13-7/8 8-5/16 50-7/8 4490 299000 418000 418000 598000
2-3/8 60 14-1/4 8-9/16 52-1/4 4730 314000 440000 440000 628000
2-7/16 62 14-5/8 8-3/4 53-5/8 4960 330000 462000 462000 660000
2-1/2 64 15 9 55 5270 346000 484000 484000 692000
2-9/16 66 15-3/8 9-1/4 56-3/8 5540 363000 507000 507000 726000
2-5/8 67 15-3/4 9-7/16 57-3/4 5820 379000 530000 530000 758000
2-11/16 68 16-1/8 9-11/16 59-1/8 6110 396000 554000 554000 792000
2-3/4 70 16-1/2 9-7/8 60-1/2 6410 413000 578000 578000 826000
2-13/16 71 16-7/8 10-1/8 61-7/8 6710 431000 603000 603000 861000
2-7/8 73 17-1/4 10-3/8 63-1/4 7020 449000 628000 628000 897000
2-15/16 75 17-5/8 10-9/16 64-5/8 7330 467000 645000 645000 934000
3 76 18 10-13/16 66 7650 485000 679000 679000 970000
3-1/16 78 18-3/8 11 67-3/8 7980 504000 705000 705000 1008000
3-1/8 79 18-3/4 11-1/4 68-3/4 8320 523000 732000 732000 1046000
3-3/16 81 19-1/8 11-1/2 70-1/8 8660 542000 759000 759000 1084000
3-1/4 83 19-1/2 11-11/16 71-1/2 9010 562000 787000 787000 1124000
3-5/16 84 19-7/8 11-15/16 72-7/8 9360 582000 814000 814000 1163000
3-3/8 86 20-1/4 12-1/8 74-1/4 9730 602000 843000 843000 1204000
3-7/16 87 20-5/8 12-3/8 75-5/8 10100 622000 871000 871000 1244000
3-1/2 90 21 12-5/8 77 10500 643000 900000 900000 1285000
3-5/8 92 21-3/4 12-15/16 79-3/4 11300 685000 958000 958000 1369000
3-3/4 95 22-1/2 13-3/8 82-1/2 12000 728000 1019000 1019000 1455000
3-7/8 98 23-1/4 14 85-1/4 12900 772000 1080000 1080000 1543000
4 102 24 14-3/8 88 13700 816000 1143000 1143000 1632000

LISTER CHAIN & FORGE, INC.


®
3810 Loomis Trail Rd., Blaine, WA 98230, U.S.A.
Telephone: (360) 384-4749 • Fax: (360) 332-4247
SINCE 1911 e-mail: inquiries@listerchain.com • www.listerchain.com
0047-04 4/23/06 9:28 PM Page 49

49-06

LISTER CHAIN & FORGE, INC.

STUD LINK ANCHOR CHAIN

MIL-C-24633 AMERICAN BUREAU


OF SHIPPING
US NAVY AND LLOYD’S
DOD

LISTER
USN

USN
APPROVED

L Number Nominal
Length over of weight
Link 6 links Link links Proof Break per 15-
Chain length inches width per 15- test test fathom
size A B fathom load load shot
inches inches Minimum Nominal Maximum inches shot (lb) (lb) (lb)*
3/4 41/2 19 3/8 191/2 1913/16 25/8 359 48,000 75,000 480
7/8 51/4 22 5/8 22 3/4 231/16 31/8 305 64,000 98,000 660
1 6 25 7/8 26 26 3/8 39/16 267 84,000 129,000 860
11/8 6 3/4 29 1/16 291/4 29 5/8 4 237 106,000 161,000 1,080
11/4 71/2 32 5/16 321/2 32 15/16 41/2 217 130,000 198,000 1,350
13/8 81/4 35 9/16 35 3/4 361/4 415/16 193 157,000 235,000 1,630
11/2 9 3813/16 39 391/2 53/8 177 185,000 280,000 1,940
15/8 93/4 42 421/4 427/8 57/8 165 216,000 325,000 2,240
13/4 101/2 451/4 451/2 461/8 65/16 153 249,000 380,000 2,590
17/8 111/4 48 1/2 48 3/4 491/2 6 3/4 143 285,000 432,000 2,980
2 12 5111/16 52 523/4 73/16 135 318,000 454,000 3,360
21/8 123/4 5415/16 551/4 561/8 75/8 125 357,000 510,000 3,790
21/4 131/2 58 3/16 581/2 59 3/8 81/8 119 396,000 570,000 4,250
23/8 141/4 617/16 613/4 623/4 8 9/16 113 440,000 628,000 4,730
21/2 15 6411/16 65 66 9 107 484,000 692,000 5,270
25/8 15 3/4 67 7/8 681/4 691/4 97/16 101 530,000 758,000 5,820
23/4 161/2 711/8 711/2 72 9/16 97/8 97 578,000 826,000 6,410
27/8 171/4 74 3/8 743/4 75 7/8 10 3/8 93 628,000 897,000 7,020
3 18 77 5/8 78 79 3/16 10 13/16 89 679,000 970,000 7,650
31/8 183/4 8013/16 811/4 821/2 111/4 87 732,000 1,046,000 8,320
31/4 191/2 841/16 841/2 853/4 1111/16 83 787,000 1,124,000 9,010
33/8 201/4 87 5/16 873/4 89 121/8 79 843,000 1,204,000 9,730
31/2 21 90 9/16 91 925/16 12 5/8 77 900,000 1,285,000 10,500
35/8 213/4 93 13/16 941/4 955/8 1215/16 73 958,000 1,369,000 11,300
33/4 221/2 97 1/16 971/2 987/8 13 3/8 71 1,019,000 1,455,000 12,000
37/8 231/4 1001/4 1021/4 102 3/16 14 69 1,080,000 1,543,000 12,900
4 24 1031/2 104 105 1/2 14 3/8 67 1,143,000 1,632,000 13,700
43/4 281/2 122 15/16 1231/2 125 5/16 171/8 57 1,700,000 2,550,000 18,900
*Not mandatory, for information only.

LISTER CHAIN & FORGE, INC.


®
3810 Loomis Trail Rd., Blaine, WA 98230, U.S.A.
Telephone: (360) 384-4749 • Fax: (360) 332-4247
SINCE 1911 e-mail: inquiries@listerchain.com • www.listerchain.com
0048-04 4/25/06 10:18 AM Page 1

50-06

LISTER CHAIN & FORGE, INC.

U.S. NAVY Mil Spec MIL-2710B


DETACHABLE
CHAIN
CONNECTING
LINKS

CHAIN SIZE PROOF TEST BREAK TEST WT.


A B C D E F
INCHES MM IN POUNDS IN POUNDS LBS.
✽ 3/4 19 3/4 4 1/2 3 1 3/64 27/32 1/2 67,500 91,100 2.1
✽ 13/16 - 7/8 21 - 22 7/8 5 1/4 3 1/2 1 7/32 63/64 19/32 88,200 119,000 3.4
✽ 15/16 -1 24 - 25 1 6 4 1 25/64 1 1/8 21/32 116,100 156,700 5.1
✽ 1 1/16 - 1 1/8 27 - 29 1 1/8 6 3/4 4 1/2 1 9/16 1 17/64 47/64 145,000 195,000 7.2
✽ 1 3/16
-1 1/4 30 - 32 1 1/4 7 1/2 5 1 47/64 1 13/32 13/16 178,200 240,600 9.9
✽ 1 5/16 - 1 3/8 33 - 34 1 3/8 8 1/4 5 1/2 1 29/32 1 35/64 29/32 211,500 285,500 13.3
✽ 1 7/16 - 1 1/2 36 - 38 1 1/2 9 6 2 5/64 1 11/16 63/64 252,000 340,200 17.3
✽ 1 9/16 - 1 5/8 40 - 42 1 5/8 9 3/4 6 1/2 2 1/4 1 53/64 1 1/16 292,500 395,000 22
✽ 1 11/16 - 1 3/4 43 - 44 1 3/4 10 1/2 7 2 7/16 131/32 1 3/16 352,000 476,000 27.5
1 13/16 - 1 7/8 46 - 48 1 7/8 11 1/4 7 1/4 2 11/32 2 3/32 1 15/64 285,000 432,000 32
115/16 - 2 50 - 51 2 12 7 3/4 2 1/2 2 5/16 1 5/16 322,000 488,000 36
2 1/16 - 2 1/8 52 - 54 2 1/8 12 3/4 8 1/4 2 21/32 2 1/2 1 13/32 362,000 548,000 44
2 3/16 - 2 1/4 56 - 58 2 1/4 13 1/2 8 23/32 2 13/16 2 5/8 1 1/2 403,000 610,000 52
2 5/16 - 2 3/8 59 - 60 2 3/8 14 1/4 9 7/32 2 31/32 2 3/4 1 9/16 447,000 675,000 61
2 7/16 - 2 1/2 62 - 64 2 1/2 15 9 11/16 3 1/8 2 7/8 1 21/32 492,000 744,000 71
2 9/16 - 2 5/8 66 - 67 2 5/8 15 3/4 10 3/16 3 1/4 3 1/16 1 3/4 540,000 813,000 82
✩ 2 11/16 - 2 3/4 68 - 70 2 7/8 16 1/2 10 13/16 3 11/16 3 1/4 1 13/16 649,000 981,000 100
2 13/16 - 2 7/8 71 - 73 2 7/8 17 1/4 11 1/8 3 19/32 3 11/32 1 29/32 640,000 965,000 107
✩ 2 15/16 - 3 75 - 76 3 3/16 18 11 7/8 4 3/32 3 3/8 1 29/32 762,000 1,150,000 145
3 1/16 - 3 1/8 78 - 79 3 1/8 18 3/4 12 1/8 3 29/32 3 5/8 2 3/64 748,000 1,128,000 138
3 3/16 -3 1/4 81 - 83 3 1/4 19 1/2 12 5/8 4 1/16 3 5/8 2 5/32 805,000 1,250,000 161
3 5/16 - 3 3/8 84 - 86 3 3/8 20 1/4 13 3/32 4 7/32 3 15/16 2 1/4 862,000 1,304,000 177
✩ 3 7/16 - 3 1/2 87 - 89 3 3/4 21 1/8 13 25/32 4 13/16 4 1/8 2 13/32 1,080,000 1,700,000 205
3 11/16 - 3 3/4 94 - 95 3 3/4 22 1/2 14 1/2 4 11/16 4 11/16 2 7/16 1,045,900 1,575,000 256
4 3/4 120 4 3/4 28 1/2 18 7/16 5 15/16 5 1/2 3 1/8 1,700,000 2,550,000 590

✽ High Strength Pattern ✩ Heavy Duty Pattern Military Specification MIL-L-2710

LISTER CHAIN & FORGE, INC.


®
3810 Loomis Trail Rd., Blaine, WA 98230, U.S.A.
Telephone: (360) 384-4749 • Fax: (360) 332-4247
SINCE 1911 e-mail: inquiries@listerchain.com • www.listerchain.com
0051-03 4/23/06 9:30 PM Page 1

51-06

OIL RIG QUALITY STUD LINK ANCHOR CHAIN


Link Link Length Over Links Weight Oil Rig Quality Super Oil Rig Quality
Chain Length Width Six Links Per 15 Per 15 Fathom Proof Break Proof Break
Size A B C Fathom Shot Shot Approx. Test Pounds Test Pounds Test Pounds Test Pounds
1 6 3-9/16 26 267 900 84,000 129,000 130,000 180,600
1-1/8 6-3/4 4 29-1/4 237 1,140 106,000 161,000 164,300 225,400
1-1/4 7-1/2 4-1/2 32-1/2 213 1,415 130,000 198,000 201,500 277,200
1-3/8 8-1/4 4-15/16 35-3/4 195 1,705 157,000 235,000 243,300 329,000
1-1/2 9 5-3/8 39 179 2,035 185,000 280,000 286,700 392,000
1-5/8 9-3/4 5-7/8 42-1/4 165 2,345 216,000 325,000 334,800 455,000
1-3/4 10-1/2 6-5/16 45-1/2 153 2,720 249,000 380,000 385,900 532,000
1-7/8 11-1/4 6-3/4 48-3/4 143 3,125 285,000 432,000 441,700 604,800 C
2 12 7-3/16 52 133 3,525 322,000 488,000 499,000 683,000
2-1/16 12-3/8 7-7/16 53-5/8 129 3,750 342,000 518,000 530,000 725,000
2-1/8 12-3/4 7-5/8 55-1/4 125 3,975 362,000 548,000 561,000 767,000
2-3/16 13-1/8 7-7/8 56-7/8 123 4,215 382,500 579,100 592,800 810,700
2-1/4 13-1/2 8-1/8 58-1/2 119 4,460 403,000 610,000 624,600 854,000
2-5/16 13-7/8 8-5/16 60-1/8 117 4,710 425,000 642,500 658,700 899,500
2-3/8 14-1/4 8-9/16 61-3/4 113 4,960 447,000 675,000 692,000 945,000
2-7/16 14-5/8 8-3/4 63-3/8 111 5,210 469,500 709,500 727,700 993,000
2-1/2 15 9 65 107 5,528 492,000 744,000 762,000 1,041,600
2-9/16 15-3/8 9-1/4 66-5/8 105 5,810 516,000 778,500 799,800 1,090,000
2-5/8 15-3/4 9-7/16 68-1/4 103 6,105 540,000 813,000 837,000 1,138,000
2-11/16 16-1/8 9-11/16 69-7/8 99 6,410 565,000 849,000 875,700 1,188,000
2-3/4 16-1/2 9-7/8 71-1/2 97 6,725 590,000 885,000 914,000 1,239,000
2-13/16 16-7/8 10-1/8 73-1/8 95 7,040 615,000 925,000 953,000 1,295,000
2-7/8 17-1/4 10-3/8 74-3/4 93 7,365 640,000 965,000 992,000 1,351,000
2-15/16 17-5/8 10-9/16 76-3/8 91 7,696 666,500 1,005,000 1,032,000 1,407,000
3 18 10-13/16 78 89 8,035 693,000 1,045,000 1,067,000 1,452,000
3-1/16 18-3/8 11 79-5/8 87 8,379 720,500 1,086,500 1,109,000 1,510,000 B
3-1/8 18-3/4 11-1/4 81-1/4 85 8,736 748,000 1,128,000 1,152,000 1,567,900
3-3/16 19-1/8 11-1/2 82-7/8 85 9,093 776,050 1,169,000 1,195,000 1,624,900
3-1/4 19-1/2 11-11/16 84-1/2 83 9,460 804,100 1,210,000 1,238,000 1,681,900
3-5/16 19-7/8 11-15/16 86-1/8 81 9,828 833,150 1,253,000 1,283,000 1,741,000
A
3-3/8 20-1/4 12-1/8 87-3/4 79 10,210 862,200 1,296,000 1,327,700 1,801,600
3-7/16 20-5/8 12-3/8 89-3/8 77 10,599 892,100 1,339,550 1,373,800 1,861,900
3-1/2 21 12-5/8 91 77 10,998 922,000 1,383,100 1,419,800 1,922,000
3-5/8 21-3/4 12-15/16 94-1/4 73 11,607 1,021,000 1,566,000 1,572, 000 2,176,700
3-3/4 22-1/2 13-3/8 97-1/2 71 12,626 1,120,000 1,750,000 1,724,000 2,432,000
3-7/8 23-1/4 14 100-3/4 69 13,570 1,205,000 1,863,000 1,855,000 2,589,000
4 24 14-3/8 104 67 14,400 1,298,000 1,996,500 1,998,900 2,775,000

DOCK FENDER SIZE / DIA. 1/2 inch 5/8 inch 3/4 inch 1 inch 12.7 mm 15.9 mm 19.1 mm 25.4 mm

CHAIN Proof test


Av. ult. strength
15,000*
35,000*
35,000*
58,000*
55,000*
105,000*
100,000*
160,000*
6,804**
15,876**
15,876**
26,308**
24,948**
47,627**
45,351**
72,562**
Max. elongation 15% 15% 15% 15% 15% 15% 15% 15%
Brinell hardness 229-277 229-277 331-388 331-388 229-277 229-277 229-277 331-388
Links per ft. (per m) nominal 3.2 3.2 3.2 2.9 10.5 10.5 10.5 9.54
B
Wt. per 100 ft. (per m) 205* 320* 446* 814* 3.05 4.78 4.78 12.1
Max. link width 1.874 2.243 2.700 3.375 47.60 56.97 56.97 85.72
A (inside length) 3.25 3.75 3.7500 4.125 95.25 95.25 95.15 104.78
Sect. + .015-0 + .015-0 ± .025
A
view
B (inside width) .789 ± .031 .900 ± .031 1.125 ± .031 1.375 20.04 22.86 28.48 34.93
C (thickness) .531 .656 .750 ± .008 1.000 13.49 16.66 19.05 25.40
D (max. swell) .025 .025 – – .064 .064 – –
C Alloy safety anchor shackle 851A 852A 854A 854A 851A 852A 854A 854A
Shackle ultimate strength 60,000* 81,000* 135,000* 135,000* 27,216** 36,741** 61,235** 61,235**
* Strengths and weights in lbs. ** Strengths and weights in Kg.
HOT DIPPED GALVANIZED

P.O. Box 58645


Houston, Texas 77258
Telephone: 713-644-1183
Fax: 713-644-1185
MARINE & INDUSTRIAL SUPPLY, INC. www.anchormarinehouston.com
TOLL FREE (800) 233-8014 sales@anchormarinehouston.com
0050-04 4/23/06 9:32 PM Page 1

52-06

LHR SERVICES & EQUIPMENT, INC.

Specify swivel
shackle or
standard shackle
at time of order.

110T SWL 110T SWL 110T SWL


GRAPNEL “J” CHASER PERMANENT CHASER
Grapnels and chasers are designed
and field tested to effectively perform
the required task and manufactured in
accordance with international quality
control systems. The bearing surfaces
BEARING BLOCK of the chasers are hardfaced to resist
impact and abrasion. The detachable
chaser can be supplied with inter-
changeable bearing block or roller
block. Specify at time of order.
250 T & 500T SWL grapnel and
chasers available on request.

110T SWL ROLLER BLOCK CLOSED


DETACHABLE CHASER SPELTER
SOCKET

ULSTER TYPE CHAIN STOPPER


HINGE LINK
SIZE A B C D E F G
SWL
1-5/8 – 1-7/8 25 14-1/4 17-1/8 14-1/2 9-3/4 14-1/4 2 WIRE SIZE A B C D
TON
2-1/4 – 2-1/2 39 21-1/2 27-3/8 22-3/8 15-1/8 20-1/2 3-5/16
2-1/4 – 2-3/8 23 15-1/4 3-1/16 4 110
2-7/8 – 3-1/8 53-1/2 29-5/8 36-1/2 30-1/2 20-1/2 28-1/4 4
2-3/4 – 2-7/8 32 21-3/8 4-3/8 5-7/8 150
3-1/4 – 3-1/2 46-3/4 27 34 26-1/2 17-3/4 24-3/8 4-3/8
3 – 3-3/8 35 22-3/4 4-7/8 6-1/2 175
3-7/8 – 4-1/4 70-3/4 39-1/4 49 41 30 37-1/2 5-1/2

LHR Services and Equipment, Inc.


7815 Hansen, Houston, TX 77061 • Ph: 713-943-2324 • Fax: 713-943-1231
See Ad Section for detachable chain, anchor Toll Free: 800-943-2324 • www.lhrservices.com • sales@lhrservices.com
connecting links and Hi-Torque chain stoppers. LHR Marine Limited
Also a listing of U. S. Navy marine equipment. Unit 3, Deemouth Centre, South Esplanade East, Aberdeen AB11 9PB UK
Ph: 44 1224 248821 • Fax: 44 1224 248831 • info@lhrmarine.com
“Striving to Keep the Future Safe”
0051-04 4/24/06 11:10 PM Page 1

53-06

WATERMAN SUPPLY CO., INC.


DETACHABLE LINK PUNCHES
These punches are designed for the assembly and disassembly of detachable chain connecting links, kenter
links, and anchor joining links. Sizes will vary for kenters and pear links made from steel, heat treated to 45-50
Rockwell C.

ASSEMBLING PUNCHES
Link Size E K H L
Punch No. Inches Inches Inches Inches Inches Handle
P-1A 5/8 - 3/4 3/4 15/64 5 1-1/8
P-2A 7/8-1 3/4 17/64 5 1-1/8
P-3A 1-1/8
1-1/4 - 1-3/8 1 3/8 6 1-3/8
P-4A 1-1/2 - 1-5/8 1 33/64 6-1/2 1-3/8
P-5A 1-3/4 - 2 1 21/32 6-1/2 1-1/2 x
P-6A 2-1/8 - 2-3/8 1 51/64 6-1/2 1-5/8 x
P-7A 2-1/2 - 2-7/8 1-1/8 61/64 6-1/2 1-5/8 x
P-8A 3 1-1/4 1-9/64 7 1-3/4 x

DISASSEMBLY PUNCHES
Link Size E F H G
Punch No. Inches Inches Inches Inches Inches Handle
P-1D 5/8 - 3/4 3/4 13/64 5 1-1/4
P-2D 7/8 -1 3/4 15/64 5 1-1/2
P-3D 1-1/8
1-1/4 - 1-3/8 1 5/16 6 2-1/2
P-4D 1-1/2 - 1-5/8 1 15/32 6-1/2 2-7/8
P-5D 1-3/4 - 2 1 9/16 6-1/2 3-1/4 x
P-6D 2-1/8 - 2-3/8 1 11/16 6-1/2 3-1/2 x
P-7D 2-1/2 - 2-7/8 1-1/8 13/16 6-1/2 3-1/2 x
P-8D 3 1-1/4 1 7 4 x

HANDLES FOR SIZES 1-3/4 AND OVER

MADE IN U.S.A. P. O. Box 596 (90748)


Other SEA-LINK Products:
910 Mahar Ave., Wilmington, CA 90744
ALLOY TOWING SHACKLES
(800) 322-3131 • (310) 522-9698
TOWING PLATES
Fax: (310) 522-1043
CHAIN STOPPERS E-Mail: waterman@bigplanet.com
See Our Ad in the Advertising Section FENDERS – BUOYS www.watermansupply.com
0052-04 4/23/06 9:33 PM Page 1

54-06

ACSA

ANCHOR CONNECTING LINK PEAR LINK DETACHABLE CHAIN CONNECTING LINK

ANCHOR CONNECTING LINK (PEAR LINK)


No CHAIN SIZE A B C D E F G H J K WEIGHT PROOF BREAK
TEST TEST
mm inches mm mm mm mm mm mm mm mm mm mm kg lbs kg kg
2 19–24 3/4 – 15/16 194 132 38 24 32 57 24 35 17 30 3,6 8.0 34000 48500
3 25–30 1 – 1-3/16 238 167 46 30 38 66 33 45 19 35 6,5 14.0 53000 75700
4 32–40 1-1/4–1-9/16 299 206 59 40 48 83 40 x 45 56 26 43 14,5 32.0 91400 131000
5 42–51 1-5/8 – 2 378 260 76 51 64 100 51 x 60 74 32 52 27,0 60.0 145400 207700
6 52–60 2-1/16–2-3/8 454 313 92 60 76 121 62 x 73 88 37 64 49,0 107.0 199600 285200
7 62–79 2-7/16–3-1/8 562 376 121 79 95 149 86 x 79 111 48 76 92,0 203.0 332100 474500
8 81–92 3-3/16–3-5/8 654 419 133 92 124 149 111 x 102 130 x 133 54 79 149,0 328.0 434800 621200
9 94–95 3-11/16–3-3/4 692 435 146 98 130 159 124 x 137 141 57 83 236,0 520.0 462300 660100
10 97-102 3-13/16–4 889 572 191 121 165 191 130 x 148 181 73 108 386,0 850.0 522100 746000
11 103–108 4-1/16 – 4-1/4 940 610 203 127 175 203 156 200 76 111 418,0 920.0 577000 825100
12 110–114 4-5/16–4-1/2 991 948 216 133 184 216 165 x 167 210 x 200 105 114 459,0 1010.0 637300 910900

DETACHABLE CHAIN CONNECTING LINK


CHAIN SIZE A B C D E F G WEIGHT PROOF BREAK
TEST TEST
mm inches mm mm mm mm mm mm mm kg lbs kg kg
24–25 15/16 – 1 152 102 35 25 29 31 17 2,3 5.1 38000 54300
27–29 1-1/16 – 1-1/8 172 114 40 29 32 35 19 3,3 7.3 49200 70400
30–32 1-3/16 – 1-1/4 191 127 44 32 36 39 21 4,6 10.1 59500 84900
33–35 1-5/16 – 1-3/8 210 140 48 35 40 43 23 6,2 13.7 70700 101300
36–38 1-7/16 – 1-1/2 229 152 53 38 43 47 26 7,9 17.4 83300 118900
40–42 1-9/16 – 1-5/8 248 165 57 42 47 50 28 10,0 22.0 102000 143400
43–44 1-11/16 – 1-3/4 267 178 62 45 50 56 30 12,5 27.6 111900 159900
46–48 1-13/16 – 1-7/8 286 191 64 48 55 60 32 14,5 32.0 130000 185100
50–51 1-15/16 – 2 305 197 64 51 59 64 34 16,3 35.9 145400 207700
52–54 2-1/16 – 2-1/8 324 209 67 54 63 68 36 20,0 44.1 162000 231500
56–58 2-3/16 – 2-1/4 343 222 71 58 66 71 38 23,6 52.0 185400 265000
59–60 2-5/16 – 2-3/8 364 235 78 61 70 76 41 28,0 61.7 199600 285200
62–64 2-7/16 – 2-1/2 381 246 79 64 74 79 43 32,2 71.0 223000 319000
66–67 2-9/16 – 2-5/8 400 259 83 67 77 83 45 37,0 81.6 242900 347000
68–70 2-11/16 – 2-3/4 419 271 87 70 81 87 47 45,0 99.2 263500 376400
71–73 2-13/16 – 2-7/8 438 283 91 73 85 91 49 49,0 108.0 285000 407000
75–76 2-15/16 – 3 457 296 95 76 88 95 51 55,0 121.0 308200 440200
78–79 3-1/16 – 3-1/8 476 308 99 79 92 99 53 63,0 139.0 332100 474500
81–83 3-3/16 – 3-1/4 495 320 103 83 96 103 55 73,0 161.0 360400 514800
84–86 3-5/16 – 3-3/8 514 333 107 86 99 107 57 80,0 176.0 384400 549100
87–89 3-7/16 – 3-1/2 533 345 111 89 103 111 60 93,0 205.0 409000 584300
90–92 3-9/16 – 3-5/8 553 357 115 92 107 115 62 97,6 215.0 434800 621200
94–95 3-11/16 – 3-3/4 572 370 119 95 111 119 64 116,2 256.0 462300 660100
97–98 3-13/16 – 3-7/8 591 382 128 98 114 123 66 123,0 271.0 490000 700000
100–102 3-15/16 – 4 610 394 132 102 118 127 68 131,0 289.0 522100 746000
105 4-1/8 629 419 147 105 127 132 70 175,0 386.0 550000 785000
111 4-3/8 667 456 167 111 138 140 75 208,0 459.0 607000 867200
114 4-1/2 686 480 190 114 147 144 77 227,0 500.0 637300 910900

P. O. Box 596 (90748)


910 Maher Ave., Wilmington, CA 90744
(800) 322-3131 • (310) 522-9698
Products Fax: (310) 522-1043
Chain • Anchors E-Mail: waterman@bigplanet.com
See Our Ad in the Advertising Section Hardware • Fittings www.watermansupply.com
0053-05 4/23/06 9:34 PM Page 1

55-06

ACSA

SWIVEL KENTER JOINING SHACKLE


SWIVEL
CHAIN SIZE PROOF BREAK
(Diameter) A B C D E F G L Weight
TEST TEST
mm inches mm mm mm mm mm mm mm mm kg lbs. kg kg
30–35 1-3/16 – 1-3/8 290 160 124 116 46 25 36 499 21,0 46.3 70700 101300
36–42 1-7/16 – 1-5/8 373 202 146 145 63 32 46 622 39,5 87.1 102000 143400
43–48 1-11/16 – 1-7/8 430 230 165 183 73 36 50 709 66,0 145.5 130000 185100
49–58 1-15/16 – 2-1/4 516 278 200 212 84 39 65 851 104,0 229.3 185400 265000
59–67 2-5/16 – 2-5/8 575 307 230 235 93 46 68 972 142,0 313.1 242900 347000
68–73 2-11/16 – 2-7/8 650 345 260 256 102 50 79 1078 208,0 458.6 285000 407000
75–79 2-15/16 – 3-1/8 757 370 325 281 109 62 94 1209 276,0 608.5 332100 474500
81–86 3-3/16 – 3-3/8 760 420 272 310 122 57 95 1259 336,0 740.8 384400 549100
87–92 3-7/16 – 3-5/8 800 430 290 320 130 60 98 1343 376,0 878.9 434800 621200
94–98 3-11/16 – 3-7/8 882 460 333 354 142 66 118 1442 557,0 1228.0 490000 700000
100–102 3-15/16 – 4 918 480 348 368 148 69 122 1502 612,0 1349.0 522100 746000
105–111 4-1/8 – 4-3/8 1000 530 378 400 160 74 133 1635 797,0 1757.0 607000 867200
114 4-1/2 1026 542 390 417 165 76 137 1675 871,0 1920.0 637300 910900

KENTER JOINING SHACKLE


NOMINAL DIAMETER (D) A B C WEIGHT PROOF TEST BREAK TEST

mm inches kg lbs kg kg
24 15/16 144 101 36 2,1 4.6 34000 48500
29 1-1/8 174 122 44 4,8 10.6 49200 70400
32 1-1/4 192 134 49 5,0 11.0 59500 84900
36 1-7/16 216 151 55 8,0 17.6 76700 109400
38 1-1/2 228 160 58 9,0 19.8 83300 118900
42 1-5/8 252 176 64 12,0 26.5 102000 143400
44 1-3/4 264 185 67 14,0 30.8 111900 159900
46 1-13/16 276 193 70 15,0 33.1 119800 171100
48 1-7/8 288 202 73 18,0 39.7 130000 185100
51 2 306 214 78 21,0 46.3 145400 207700
54 2-1/8 324 227 82 24,0 52.9 162000 231500
56 2-3/16 336 235 85 26,0 57.3 174000 248000
58 2-1/4 348 244 88 31,0 68.3 185400 265000
60 2-3/8 360 252 91 34,0 75.0 199600 285200
62 2-7/16 372 260 94 36,0 79.4 210000 300000
64 2-1/2 384 269 97 38,0 83.8 223000 319000
67 2-5/8 402 281 102 41,0 90.4 242900 347000
70 2-3/4 420 294 106 52,5 115.7 263500 376400
73 2-7/8 438 307 111 60,0 132.3 285000 407000
76 3 456 319 116 70,0 154.3 308200 440200
78 3-1/16 468 328 119 71,0 156.5 322000 459000
84 3-5/16 504 353 128 92,0 202.8 369300 527600
87 3-7/16 522 365 132 103,0 227.1 395100 564300
89 3-1/2 534 374 135 113,0 249.1 409000 584300
92 3-5/8 552 386 140 115,0 253.5 434800 621200
95 3-3/4 570 399 144 132,0 291.0 462300 660100
102 4 612 428 155 163,0 359.4 522100 746000
108 4-1/4 648 454 164 196,0 432.1 577000 825000
111 4-3/8 666 466 169 213,0 469.6 607000 867200
114 4-1/2 684 479 173 233,0 513.7 637300 910900

Distributed in the U.S. by:


ACSA Waterman Supply Co., Inc.
PRODUCTS 910 Mahar Ave., Wilmington, CA 90744
P. O. Box 596, Wilmington, CA 90748
Chain • Anchors (800) 322-3131 • (310) 522-9698
Hardware • Fittings Fax: (310) 522-1043 • www.watermansupply.com
E-Mail: waterman@bigplanet.com
54-05 4/23/06 9:35 PM Page 1

56-06

WASHINGTON CHAIN & SUPPLY, INC.

Commercial Grade
DEVIL’S CLAW TYPE
CHAIN STOPPERS

Chain Size B B Det Link Proof


Inches mm A Min. Max. C D E Size Load Lbs.

3/4 19 16 35-1/2 42-3/4 12 11 7/8 3/4 34,000


7/8 22 17-1/4 38-1/4 45-3/8 12 11 1 7/8 46,000
1 – 1-1/8 – 1-1/4 25-32 19-1/2 43-1/16 52-13/16 12-3/4 13 1-1/4 1-1/8 92,200
1-3/8 – 1-1/2 – 1-5/8 34-42 23-3/4 50-1/4 60-3/4 13 16 1-1/2 1-3/8 153,000
1-3/4 – 2 44-51 24-1/8 53-1/8 63-5/8 16 16 1-1/2 1-1/2 160,000
2-1/8 – 2-3/8 54-60 26-1/4 56-1/4 66-3/4 19 16 1-5/8 1-1/2 170,000
2-1/2 – 2-5/8 64-67 29-3/4 65 78-1/8 20 20 1-7/8 1-5/8 200,000
2-3/4 70 29-3/4 67-1/4 80-1/4 24 20 1-7/8 2-1/8 220,000
3 76 36 76-1/4 92-3/8 24 24 2-3/8 2-1/8 220,000

DIMENSIONS IN INCHES

PELICAN HOOK TYPE


CHAIN STOPPERS

Chain Size B B Det. Proof Break


A Min. Max. C D E Link
Size Load Lbs. Load Lbs.
Inches MM
3/4 19 16 33-1/4 40-1/2 1 11 7/8 3/4 67,500 91,100
7/8 22 17-1/4 38-7/16 45-9/16 1-7/32 11 1 7/8 88,200 119,000
1 - 1 1/8 25 - 29 19-1/2 46-7/8 55-1/2 1-17/32 13 1-1/8 1-1/8 145,000 195,000
1 1/4 32 19-5/8 48 56-5/8 1-17/32 13 1-1/4 1-1/4 178,200 240,600
1-1/4HS - 1-1/2 32HS - 38 23-3/4 55-3/16 65-11/16 1-3/4 16 1-1/2 1-3/8 211,500 285,500
1-3/8HS - 1-5/8 34HS - 42 23-3/4 55-3/16 65-11/16 2 16 1-1/2 1-3/8 211,500 285,500
1-5/8HS - 2 42HS - 51 24-1/8 59-3/16 69-11/16 2-7/16 16 1-1/2 1-1/2 252,000 340,200
2-1/8 - 2-3/8 54 - 60 26-1/4 65-5/8 76-1/8 2-9/16 16 1-5/8 1-1/2 252,000 340,200
2-1/2 - 2-5/8 64 - 67 29-3/4 74-3/8 87-1/2 3-1/8 20 1-7/8 1-5/8 292,500 395,000
2-3/4 - 2-3/4HD 70 - 70HD 29-3/4 86-5/8 89-3/4 3-1/8 20 1-7/8 1-3/4 352,000 476,000
3HD - 3-1/4 76HD - 83 36 90-3/4 106-1/2 3-3/4 24 2-3/8 2-1/4 403,000 610,000
3-3/8 - 3-1/2 86 - 89 38-5/8 97-7/16 113-1/16 3-7/8 24 2-5/8 2-1/2 492,000 744,000
3-1/2HD - 3-3/4 89HD - 95 44-3/8 110 128-1/8 4-1/2 27-1/2 2-7/8 3 706,000 1,068,000

DIMENSIONS IN INCHES

One of the largest inventories of marine equipment and supplies


in the United States – ask for our FREE illustrated catalog.
WASHINGTON CHAIN & SUPPLY, INC.
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124
Phone: (206) 623-8500 • FAX: (206) 621-9834 • E-mail: info@wachain.com
VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
Atlantic Cordage 4/23/06 9:36 PM Page 1

57-06

3 AND 8 STRAND ROPES


Size Polypropylene Nylon Polyester Poly/Dac Manila
Diameter Circ. Min. Lbs. Min. Lbs. Min. Lbs. Min. Lbs. Min. Lbs.
inches mm (in.) Break per 100' Break per 100' Break per 100' Break per 100' Break per 100'

3/16 5 5/8 650 0.65 880 .89 765 1.1 N/A N/A 405 1.5

1/4 6 3/4 1,125 1.15 1,485 1.57 1,315 1.95 1,200 1.6 540 2

5/16 8 1 1,710 1.8 2,295 2.45 2,050 3.05 1,870 2.5 900 2.9

3/8 9 1-1/8 2,430 2.6 3,240 3.55 2,900 4.35 2,700 3.6 1,215 4.1

7/16 11 1-1/4 3,130 3.5 4,320 4.8 3,915 5.9 3,500 4.8 1,575 5.3

1/2 12 1-1/2 3,780 4.6 5,670 6.3 5,085 7.7 4,400 6.2 2,385 7.5

9/16 14 1-3/4 4,590 5.9 7,200 8 6,435 9.8 5,200 7.6 3,105 10.4

5/8 16 2 5,580 7.2 8,910 9.9 7,825 12 6,100 9.5 3,960 13.3

3/4 18 2-1/4 7,650 10.4 12,780 14.3 11,200 17.2 8,400 13.5 4,860 16.7

13/16 20 2-1/2 9,900 12.7 17,000 17 14,425 21 N/A N/A 5,850 19.5

7/8 22 2-3/4 10,350 14.2 17,280 19.5 15,225 23.4 11,125 18 6,930 22.5

1 24 3 12,825 18 22,230 25.3 19,775 30.4 13,175 21.8 8,100 27

1-1/8 28 3-1/2 16,000 22.8 28,260 32.2 24,800 38.5 16,325 27.1 10,800 36

1-1/4 30 3-3/4 19,350 27.6 34,830 39.7 29,800 46.5 19,900 33.4 12,150 41.8

1-5/16 32 4 21,150 30.4 38,250 43.7 32,500 51 21,950 36.5 13,500 48

1-1/2 36 4-1/2 27,350 39.4 48,600 57 42,200 68 28,250 47 16,650 60

1-5/8 40 5 31,950 46 57,375 67.3 49,250 78 32,950 55 20,250 74.4

1-3/4 44 5-1/2 36,900 53 66,150 78 57,000 91 36,850 62 23,850 89.5

2 48 6 46,800 69 84,600 100 72,000 117 48,050 81 27,900 108

2-1/8 52 6-1/2 52,650 78 95,400 113 81,000 133 53,950 91 32,400 125

2-1/4 56 7 59,400 88 107,100 127 90,500 149 59,950 101 36,900 146

2-1/2 60 7-1/2 72,000 107 131,400 157 110,000 184 73,550 124 42,300 167

2-5/8 64 8 80,500 120 144,000 173 121,000 203 80,650 136 46,800 191

2-7/8 68 8-1/2 94,500 141 171,000 208 144,000 243 95,400 161 54,900 215

3 72 9 102,600 153 185,400 226 156,000 264 102,900 174 57,500 242

3-1/4 80 10 121,500 186 224,100 275 188,500 323 122,800 212 69,500 299

3-1/2 88 11 144,000 223 267,300 329 225,000 387 144,800 250 81,900 367

4 96 12 171,900 275 324,000 400 270,000 470 171,000 300 94,500 436

Complete inventories of Wire Rope,


Fiber Rope (Natural & Synthetic) and Rigging Hardware ATLANTIC CORDAGE CORP.
Rope Assemblies to Meet Your Most Exacting Specifications 35 Mileed Way, P.O. Box 30 • Avenel, NJ 07001-0030
Other constructions – styles – types available Tel: (732) 574-0700 • Fax: (732) 574-9191
including and not limited to all types of mooring lines. E-Mail: sales@atlantic-group.com
Contact us for a FREE Product Catalog Web Site: http://www.atlantic-group.com
0024-03 4/23/06 9:37 PM Page 24

58-06

SOUTHWEST OCEAN SERVICES, INC.

SYNTHETIC FIBER ROPE MOORING TAILS

APPROXIMATE BREAKING STRENGTH NOTES


Size 8 - STD 8 - STD 8 - STD Double Double
Polyester Nylon Polypro Braid Braid Mooring tails are designed to absorb
Nylon Polyester energy created in heavy traffic areas
8" 131,000 165,000 86,000 195,000 180,000 and/or severe weather situations.
9" 167,000 205,000 110,000 243,000 236,000 Standard rope construction is double
10" 200,000 258,000 131,000 295,000 291,000 braid or 8-strand fiber rope with hose
11" 243,000 304,000 155,000 351,000 345,000 covered eyes.
12” 288,000 365,000 182,000 414,000 399,000

SINGLE POINT MOORING SHACKLES & THIMBLES


SHACKLE THIMBLE

Stainless/Galv. Thimble for Single Point Mooring Applications


FOR ROPE SIZE
CIRC. DIA. Wt. Lbs.* A B C D F K W X Y CONSTRUCTION
11” - 13” 3-5/8” - 4-1/4” 105 6-11/16” 10-3/4” 21” 13” 18-3/4” 6-1/2” 6” 3-1/2” 3-3/8” High strength
14” - 15” 4-5/8” - 5” 135 10 15 26 19 24 7-1/2 7 4 4-7/8 casting corrosion
16” - 18” 5-1/4” - 6” 250 12 17-3/4 31-1/4 21-1/2 29-1/2 9 8-1/4 5 5-3/4 resistant
19” - 21” 6-1/4” - 7” 500 14 21 38 26 34-1/2 11 10-1/2 6-1/2 7-3/8 stainless
22” - 25” 7-1/4” - 8-1/4” 700 17 25 45 24 41 12-3/4 11-1/4 7-3/4 8-1/2 steel/galv.
26” - 30” 8-1/2” - 10” 1000 23-1/2 30 51-3/4 32 53 15 13-1/2 9 10
*Without retaining ring

Heavy-Duty Shackle for Use with Above Thimbles


MINIMUM
FOR BREAKING
THIMBLE WT. SWL(1) LOAD CONSTRUCTION
SIZE LBS. A B C D E TONS (SHORT TONS)
6” - 6-1/2” 27 1-1/2 1-3/4 3 6 3-3/4 20 100
Shackles include pins
7” - 8” 30 1-1/2 1-3/4 4 7 4 20 100
with two safety nuts,
8-1/2” - 10” 60 2 2-1/4 5 8 5 35 175
secured with cotter bolts
11” - 13” 130 2-1/2 3 7 10 6-1/2 60 300
to prevent backing out.
14” - 15” 175 3 3-1/2 7-3/4 12 7 85 425 Larger sizes: Available
16” - 18” 300 3-1/2 4 9-1/4 14 8-1/4 110 550 upon request.
19” - 21” 400 4 4-1/2 11 16 9-1/4 130 650 Available with one
22” - 25” 550 4-1/2 5 13 18 10-1/2 155 775 safety nut if preferred.
26” - 30” 750 5 6 15 20 12 235 1175
(1)Safe Working Load, Short Tons, Proof Load 1.5 times SWL, Breaking Strength 5 times SWL (minimum).

Southwest Ocean Services, Inc. Design & fabrication services for all types
5718 Armour Drive, Houston, TX 77020 of synthetic fiber ropes, hardware and
Tel: 713-671-9101 • Toll Free: 800-231-6687 rope systems. SYNTEC specialized rope
Fax: 713-671-2515 • E-Mail: sales@swos.net assemblies and hardware offer improved
Web: www.swos.net safety, efficiency and economy.
0025-03 4/23/06 9:37 PM Page 1

59-06

SOUTHWEST OCEAN SERVICES, INC.


SUPPLY VESSEL
WISHBONE MOORING SYSTEM
When weather conditions are too bad
to lay alongside a platform, supply
boats tie up by the stern under the
crane for loading and off loading. All
types of schemes with tires and ropes
have been tried to prevent line
breakage during rough weather. The
problem is that the distance from the
platform leg to the boat is too short.
The Wishbone System creates a much
longer line by utilizing the vertical
distance between deck and the lower
area of the platform. Wind, current and
waves create forces on a moored
vessel. Waves cause the vessel to
surge back and forth. A mooring line Data required for the design of supply vessel mooring system:
must do two things: hold against the • Deck plan showing crane location and min./max. reach.
forces and stretch to accommodate the • Elevation showing location of legs, and hull obstructions.
surge. The stretch requirement is often • Dimensions required: Normal air gap = ____ ft. / Height of hull = ____ft.
overlooked due to focus on strength • Supply vessel data: Length = ____ ft. / Beam = ____ ft. / Draft = ____ ft.
only. This system utilizes the strength Horse Power/Bollard Pull = ____ ft.
and elasticity of synthetic fiber ropes to • Weather conditions: Max. Sea Conditions = ____ ft.
hold a supply boat on station. The Max. Wind Speed = ____ knots.
elasticity compensates for vessel Max. Current = ____ knots.
motion due to waves. • Back Down Buoy Available?

RISER PROTECTION NETS These very large nets attach to the bow and stern
columns on the starboard and portside of offshore
drilling/production units. They are designed to
engage and repel large debris and a typical offshore
supply vessel of 5,000 tons, away from the risers.

The horizontal and vertical ropes of the net are


made of low stretch polyester and are made to resist
excessive motion and subsequent damage from
wave action.

Nets are designed to allow the replacement of a


section of the net in the field, ideally using the
platform cranes or winches.

Foundations for mounting the nets and for holding


the tensioners are built into the unit. The ropes are
designed to break before the hull structure is
damaged.

Southwest Ocean Services, Inc.


5718 Armour Drive, Houston, TX 77020
Tel: 713-671-9101 • Fax: 713-671-2515
Web: www.swos.net • E-Mail: sales@swos.net
62 4/23/06 9:39 PM Page 1

60-06

BRIDON
Steelite and Steelite Xtra are ideal substitutes for steel wire Mooring and towline connection times can be reduced
rope, since they exhibit very high strength, low elongation, low resulting in quicker turnaround periods. In port, vessels can be
linear density and low specific gravity. Size for size they display securely moored with a smaller number of personnel. The
the same strength as wire rope but with between one-fifth and lightweight properties of these ropes make handling easy and
one-seventh of the weight. Additionally, depending upon reduce the risk of personal injury. Existing steel wire winches
construction, they have the advantage of floating in water. can be used with minor modifications to store the equivalent
Both products exhibit lower lash back energy than other length of either rope, offering opportunities for savings in
synthetic fibres and unlike wire rope will not spiral or un-lay maintenance costs on ancillary equipment.
dangerously on recoil.

Characteristics
• Floats
SUPERLINE • Flexible
STEELITE & STEELITE XTRA • Performs well on winches
• Torque balanced
• Good abrasion resistance
• Melt point 150°C
• Good UV resistance
STEELITE 12 • Low water uptake
& STEELITE 12 XTRA Typical Applications
• Mooring lines
• Winch lines
• Deep-sea towing / tug assist lines
Steelite is manufactured using high molecular weight • Face and wing wires
polyethylene (HMPE) Dyneema® SK62 fibre. • Seismic survey towlines
• Pipe-pull ropes
Steelite Xtra is manufactured using ultra high molecular weight • Sub-sea lift ropes
polyethylene (UHMPE) Dyneema® SK75 fibre. • Tethers

Superline Superline
Size Weight Weight Steelite 12 Steelite 12 Xtra Weight Weight
Size (Dia) Steelite Steelite Xtra
(circ) Lbs. per kgs per Lbs. per kgs per
Inch 100 Ft. 100 m Minimum Strength Minimum Strength 100 Ft. 100 m Minimum Strength Minimum Strength
Inch mm (Lbs) (kg) (Lbs) (kg) (Lbs) (kg) (Lbs) (kg)
1/2" 12 1-1/2" 5.6 8.3 30,864 14,000 36,376 16,500 - - - - -
9/16" 14 1-3/4" 6.9 10.3 37,919 17,200 44,533 20,200 - - - - - -
5/8" 16 2" 8.3 12.3 44,753 20,300 52,690 23,900 - - - - - -
3/4" 18 2-1/4" 11.1 16.5 59,304 26,900 69,886 31,700 - - - - - -
13/16" 20 2-1/2" 14.1 21.0 74,295 33,700 87,523 39,700 - - - - - -
7/8" 22 2-3/4" 16.9 25.2 88,404 40,100 103,837 47,100 - - - - - -
1" 24 3" 18.1 27.0 93,696 42,500 110,230 50,000 - - - - - -
1-1/8" 28 3-1/2" 25.2 37.5 127,205 57,700 149,692 67,900 30.8 45.8 104,719 47,500 136,685 62,000
1-5/16" 32 4" 33.7 50.1 166,227 75,400 195,548 88,700 45.1 67.1 133,158 60,400 160,936 73,000
1-1/2" 36 4-1/2" 42.0 62.5 202,823 92,000 238,097 108,000 52.0 77.4 162,259 73,600 205,028 93,000
1-5/8" 40 5" 50.4 75.0 238,097 108,000 282,189 128,000 58.7 87.3 198,414 90,000 249,120 113,000
1-3/4" 44 5-1/2" 58.5 87.1 279,984 127,000 321,872 146,000 69.9 104.0 235,892 107,000 295,416 134,000
2" 48 6" 69.9 104.0 324,076 147,000 372,577 169,000 92.7 138.0 227,780 126,000 361,554 164,000
2-1/8" 52 6-1/2" 77.9 116.0 361,554 164,000 416,669 189,000 116.3 173.0 324,076 147,000 427,692 194,000
2-1/4" 56 7" 95.4 142.0 425,488 193,000 489,421 222,000 127.7 190.0 372,577 169,000 502,649 228,000
2-1/2" 60 7-1/2" 106.2 158.0 462,966 210,000 533,513 242,000 139.8 208.0 425,488 193,000 577,605 262,000
2-5/8" 64 8" 116.9 174.0 522,490 237,000 601,856 273,000 164.6 245.0 535,718 243,000 676,812 307,000
2-3/4" 68 8-1/2" 133.7 199.0 577,605 262,000 663,585 301,000 178.7 266.0 593,037 269,000 756,178 343,000
3" 72 9" 150.5 224.0 654,766 297,000 753,973 342,000 191.5 285.0 665,789 302,000 835,543 379,000
3-1/16" 76 9-1/2" 167.3 249.0 727,518 330,000 837,748 380,000 212.3 316.0 749,564 340,000 941,364 427,000
3-1/4" 80 10" 184.1 274.0 795,861 361,000 914,909 415,000 224.4 334.0 822,316 373,000 1,005,298 456,000

Dyneema® is a registered trademark of DSM High Performance Fibres

Phone: +44 (0) 1323 444777 Fax: +44 (0) 1323 444744 Email: fibresales@bridon.com
www.bridon.com
63 4/23/06 9:40 PM Page 1

61-06

BRIDON

Roundline
A twelve-strand rope consisting of 6 ‘S’ and 6 ‘Z’ strands. Two plaiting
configurations are used: 1 strand passing over 2 strands and under 2
strands (Steelite 12) or 2 strands passing over 2 strands and under 2 TWELVE-STRAND ROPE
strands.
TQ12
A floating twelve-strand rope made from a high tenacity co-polymer
olefin – Color blue / white TQ12
Size (Dia) Size
(circ) Weight Weight Minimum Strength
Applications Inch Lbs. per kgs per
• Mooring lines Inch mm 100 Ft. 100 m (Lbs) (kg)
• Floating tow 1-5/16" 32 4" 31.1 46.3 45,415 20,600
• Messenger / SPM pick-up lines. 1-1/2" 36 4-1/2" 39.3 58.5 62,390 28,300

RL-Polyester 1-5/8" 40 5" 48.6 72.3 71,650 32,500


A twelve-strand rope made from 100% polyester fibre. Displays 1-3/4" 44 5-1/2" 58.8 87.5 84,877 38,500
excellent dynamic fatigue life compared to other synthetic materials. 2" 48 6" 69.9 104.0 99,427 45,100
Applications 2-1/8" 52 6-1/2" 82.0 122.0 116,403 52,800
• Mooring and pendant lines 2-1/4" 56 7" 95.4 142.0 133,378 60,500
• Buoy moorings 2-1/2" 60 7-1/2" 109.5 163.0 152,779 69,300
• Tug assist lines
2-5/8" 64 8" 124.3 185.0 172,179 78,100
• Towing springs
• Barge tie-up lines 2-3/4" 68 8-1/2" 140.4 209.0 194,005 88,000
3" 72 9" 157.2 234.0 215,830 97,900
RL-Nylon
A twelve-strand rope made from 100% nylon fibre. High elongation 3-1/16" 76 9-1/2" 175.4 261.0 240,301 109,000
characteristics. Ideal for shock loading applications. 3-1/4" 80 10" 194.2 289.0 266,757 121,000
3-5/8" 88 11" 235.2 350.0 315,258 143,000
Applications
• Ships’ mooring and pendant lines 4" 96 12" 279.5 416.0 368,168 167,000
• Fish cage moorings

Roundline Polyester Roundline Nylon


Size (Dia) Size
(circ) Weight Lbs. Weight kgs Minimum Strength Weight Lbs. Weight kgs Minimum Strength
Inch per 100 Ft. per 100 m per 100 Ft. per 100 m
Inch mm (Lbs) (kg) (Lbs) (kg)
1" 24 3" 33.8 50.3 28,880 13,100 26.3 39.1 26,455 12,000
1-1/8" 28 3-1/2" 39.7 59.1 36,596 16,600 33.8 50.3 30,423 13,800
1-5/16" 32 4" 53.1 79.0 49,824 22,600 45.1 67.1 39,903 18,100
1-1/2" 36 4-1/2" 68.5 102.0 61,288 27,800 56.4 83.9 51,588 23,400
1-5/8" 40 5" 82.0 122.0 74,295 33,700 67.9 101.0 76,941 34,900
1-3/4" 44 5-1/2" 95.4 142.0 86,861 39,400 79.3 118.0 93,034 42,200
2" 48 6" 115.6 172.0 104,057 47,200 96.1 143.0 107,584 48,800
2-1/8" 52 6-1/2" 135.7 202.0 122,576 55,600 112.9 168.0 129,410 58,700
2-1/4" 56 7" 154.6 230.0 141,094 64,000 135.1 201.0 153,440 69,600
2-1/2" 60 7-1/2" 182.1 271.0 167,991 76,200 151.9 226.0 171,738 77,900
2-5/8" 64 8" 200.2 298.0 184,966 83,900 169.3 252.0 190,918 86,600
2-3/4" 68 8-1/2" 225.8 336.0 207,894 94,300 192.2 286.0 216,051 98,000
3" 72 9" 263.4 392.0 240,301 109,000 221.8 330.0 246,915 122,000
3-1/4" 80 10" 325.9 485.0 291,007 132,000 270.8 403.0 291,007 132,000
3-5/8" 88 11" 387.7 577.0 350,531 159,000 321.2 478.0 341,713 155,000
4" 96 12" 468.4 697.0 421,079 191,000 389.1 579.0 421,079 191,000

Phone: +44 (0) 1323 444777 Fax: +44 (0) 1323 444744 Email: fibresales@bridon.com
www.bridon.com
64 4/23/06 9:41 PM Page 1

62-06

BRIDON

CIRCULAR BRAIDED ROPE SPECIFICATIONS Characteristics


• Higher tensile strength and fatigue life than
other constructions
• High degree of flexibility with no special D/d
SUPERLINE bend restrictions
• Fully protected strength members
• Good abrasion resistance
• Torque balanced
Superline ropes are constructed using a protective braided
• Simple effective splice
outer sheath cover containing a number of load bearing
cores. Since the cores are primarily tensile strength Typical Applications
members, their design can be optimized for Superline • Mooring ropes
construction. Cores are usually 3, 6, or 12 strand braided • Mooring pendants
construction. A range of cover designs are available, each
• Tug assist ropes (polyester)
displaying individual characteristics for differing application
• Buoy moorings
situations.
• Single point mooring hawser systems

Superline Polyester Superline Nylon


Size (Dia) Size
(circ) Weight Lbs. Weight kgs Minimum Strength Weight Lbs. Weight kgs Minimum Strength
Inch per 100 Ft. per 100 m per 100 Ft. per 100 m
Inch mm (Lbs) (kg) (Lbs) (kg)
5/8" 16 2" 12.1 18 17,857 8,100 12.8 19.1 16,094 7,300
3/4" 18 2-1/4" 18.8 28 25,573 11,600 14.6 21.8 18,519 8,400
13/16" 20 2-1/2" 21.5 32 28,439 12,900 22.9 34.1 27,337 12,400
7/8" 22 2-3/4" 24.2 36 33,289 15,100 29.0 43.2 33,510 15,200
1" 24 3" 30.2 45 40,785 18,500 33.0 49.1 39,242 17,800
1-1/8" 28 3-1/2" 37.0 55 49,604 22,500 38.6 57.5 46,517 21,100
1-5/16" 32 4" 51.7 77 67,240 30,500 50.5 75.1 61,067 27,700
1-1/2" 36 4-1/2" 58.5 87 80,247 36,400 58.1 86.5 72,752 33,000
1-5/8" 40 5" 75.3 112 102,073 46,300 69.2 103.0 90,168 40,900
1-3/4" 44 5-1/2" 92.1 137 128,308 58,200 78.6 117.0 104,719 47,500
2" 48 6" 110.9 165 152,338 69,100 86.0 128.0 128,308 58,200
2-1/8" 52 6-1/2" 138.4 206 186,730 84,700 115.6 172.0 150,354 68,200
2-1/4" 56 7" 152.5 227 209,437 95,000 123.6 184.0 173,502 78,700
2-1/2" 60 7-1/2" 166.6 248 231,483 105,000 139.8 208.0 199,075 90,300
2-5/8" 64 8" 188.2 280 260,143 118,000 164.6 245.0 227,074 103,000
3" 72 9" 262.7 391 370,373 168,000 209.7 312.0 284,393 129,000
3-1/4" 80 10" 306.4 456 436,511 198,000 258.7 385.0 354,941 161,000
3-5/8" 88 11" 387.7 577 546,741 248,000 323.9 482.0 451,943 205,000
4" 96 12" 446.2 664 623,902 283,000 357.5 532.0 511,467 232,000

Phone: +44 (0) 1323 444777 Fax: +44 (0) 1323 444744 Email: fibresales@bridon.com
www.bridon.com
65 4/23/06 9:42 PM Page 1

63-06

BRIDON

MULTIFILAMENT DOUBLE BRAIDED ROPE Characteristics


• Suitable for shock load applications
Constructed by braiding a sheath over a braided hollow core. These • Very flexible
ropes offer, size for size, greater strength than conventional three or • Performs well on winches
eight strand ropes in the same materials.
• Torque balanced
• Good abrasion resistance
• Also available with polyurethane coatings for
additional resistance to abrasion

Typical Applications
• Mooring lines
• Mooring pendants / tails
• Deep-sea towing / tug assist lines
Available in the following materials
• Mooring & towing springs
Braidline 114 - 100% Nylon
• Barge lines
Braidline 138 - 100% Polyester
• Tension winch moorings
Braidline 091 - 100% Multifilament Polypropylene
• Single point mooring hawser systems
Braidline 102 - Nylon sheath over MFP core

Size Braidline 114 (Nylon) Braidline 138 (Polyester)


Size (Dia)
(circ) Weight Lbs. Weight kgs Minimum Strength Weight Lbs. Weight kgs Minimum Strength
Inch mm Inch per 100 Ft. per 100 m (Lbs) (kg) per 100 Ft. per 100 m (Lbs) (kg)
5/8" 16 2" 10.8 16 14,220 6,450 12.6 18.8 13,911 6,310
3/4" 18 2-1/4" 14.1 21 19,048 8,640 15.1 22.5 17,416 7,900
1-1/4" 21 2-5/8" 19.5 29 25,353 11,500 26.3 39.2 23,810 10,800
1" 24 3" 24.2 36 31,526 14,300 33.6 50.0 33,289 15,100
1-1/8" 28 3-1/2" 32.9 49 42,769 19,400 45.6 67.9 41,006 18,600
1-5/16" 32 4" 43.0 64 55,776 25,300 59.5 88.6 54,895 24,900
1-1/2" 36 4-1/2" 53.8 80 70,327 31,900 75.3 112.0 64,374 29,200
1-5/8" 40 5" 66.5 99 85,979 39,000 82.0 122.0 77,822 35,300
1-3/4" 44 5-1/2" 80.6 120 104,057 47,200 98.8 147.0 89,286 40,500
2" 48 6" 96.1 143 123,458 56,000 118.3 176.0 110,010 49,900
2-1/8" 52 6-1/2" 112.9 168 144,401 65,500 137.8 205.0 123,899 56,200
2-1/4" 56 7" 131.0 195 166,888 75,700 159.9 238.0 141,094 64,000
2-1/2" 60 7-1/2" 149.8 223 190,477 86,400 184.1 274.0 169,975 77,100
2-5/8" 64 8" 170.7 254 216,051 98,000 209.7 312.0 186,068 84,400
3" 72 9" 215.7 321 273,370 124,000 265.4 395.0 238,097 108,000
3-1/4" 80 10" 266.8 397 335,099 152,000 327.2 487.0 293,212 133,000
3-5/8" 88 11" 323.2 481 403,442 183,000 397.1 591.0 348,327 158,000
4" 96 12" 384.4 572 478,398 217,000 471.7 702.0 401,237 182,000
4-1/4" 104 13" 448.2 667 553,355 251,000 554.4 825.0 460,761 209,000
4-5/8" 112 14" 502.0 747 617,288 280,000 642.4 956.0 529,104 240,000
5" 120 15" 598.1 890 729,723 331,000 739.2 1100.0 606,265 275,000
5-1/4" 128 16" 661.9 985 802,474 364,000 840.0 1250.0 659,175 299,000
5-1/2" 136 17" 762.7 1135 919,318 417,000 947.5 1410.0 742,950 337,000
6" 144 18" 848.0 1262 1,016,321 461,000 1061.7 1580.0 833,339 378,000
6-1/16" 152 19" 957.6 1425 1,139,778 517,000 1182.7 1760.0 928,137 421,000
6-1/4" 160 20" 1041.6 1550 1,234,576 560,000 1310.3 1950.0 1,029,548 467,000
6-1/2" 168 21" 1155.1 1719 1,360,238 617,000 1444.7 2150.0 1,130,960 513,000
7" 176 22" 1270.7 1891 1,485,900 674,000 1585.8 2360.0 1,241,190 563,000
7-1/2" 192 24" 1516.6 2257 1,759,271 798,000 1888.2 2810.0 1,477,082 670,000
8-1/2" 216 27" 1915.1 2850 2,204,600 1,000,000 2392.2 3560.0 1,869,501 848,000
9-1/2" 240 30" 2365.3 3520 2,711,658 1,230,000 2949.9 4390.0 2, 308,216 1,047,000

Phone: +44 (0) 1323 444777 Fax: +44 (0) 1323 444744 Email: fibresales@bridon.com
www.bridon.com
66 4/23/06 9:44 PM Page 1

64-06

BRIDON

M-STEEL WINCHLINE FLEXILINE 6

A lightweight floating winch line providing high strength and low The robust 6/1 wire lay construction of this rope gives it excellent
elongation. The 6/1 wire lay construction load bearing twisted cores shape retention and spooling characteristics on a winch. Its elastic
are protected by a braided outer sheath. This rope is designed to be properties negate the need for mooring springs / pendants.
durable for work on single drum and self tensioning winches. Available
The rope exhibits excellent wet abrasion resistance, and the hard
in high visibility yellow, blue or white.
wearing monofilaments provide good resistance to surface abrasion.
Characteristics Its lower elongation and hysteresis can improve mooring accuracy,
• Low stretch particularly when used on tension winches.
• Flexibility with firm cross section
Characteristics
• Fully protected strength members
• Polyester multifilament yarn and co-polymer monofilaments
• Lightweight
• Flexibility with firm cross section
• Torque generating
• Lightweight
• Good abrasion resistance
• Torque generating
• Relative density 0.92
• Excellent abrasion resistance
• Low water absorption
• Relative density 1.25
• Fully UV stabilized
• Low water absorption
• Melt point 170° C
• Excellent UV resistance
Typical Applications • Melt point 220°C
• Mooring winch rope
Typical Applications
• Mooring winch rope

M-Steel Winchline
Size (Dia) Size
(circ) Weight Weight Minimum Strength
Inch Lbs. per kgs per
Inch mm 100 Ft. 100 m (Lbs) (kg) Flexiline 6 Mooring Rope
Size (Dia) Size
1" 24 3" 15.5 23 18,960 8,600 (circ) Weight Weight Minimum Strength
Inch Lbs. per kgs per
1-1/8" 28 3-1/2" 21.5 32 29,101 13,200 Inch mm 100 Ft. 100 m (Lbs) (kg)
1-5/16" 32 4" 29.6 44 37,699 17,100 1-5/8" 40 5" 73.9 110 68,343 31,000
1-1/2" 36 4-1/2" 42.3 63 55,776 25,300 1-3/4" 44 5-1/2" 92.1 137 92,593 42,000
1-5/8" 40 5" 49.7 74 69,224 31,400 2" 48 6" 109.5 163 110,230 50,000
1-3/4" 44 5-1/2" 60.5 90 86,861 39,400 2-1/8" 52 6-1/2" 118.9 177 119,048 54,000
2" 48 6" 77.9 116 106,703 48,400 2-1/4" 56 7" 147.8 220 160,936 73,000
2-1/8" 52 6-1/2" 90.7 135 125,883 57,100 2-1/2" 60 7-1/2" 159.9 238 169,754 77,000
2-1/4" 56 7" 100.8 150 142,638 64,700 2-9/16" 62 7-3/4" 174.0 259 191,800 87,000
2-1/2" 60 7-1/2" 114.9 171 165,125 74,900 2-5/8" 64 8" 181.4 270 196,209 89,000
2-5/8" 64 8" 128.3 191 190,918 86,600 2-3/4" 68 8-1/2" 207.0 308 227,074 103,000
2-3/4" 68 8-1/2" 141.8 211 208,996 94,800 2-7/8" 70 8-3/4" 229.1 341 249,120 113,000
3" 72 9" 155.9 232 235,892 107,000 3" 72 9" 242.6 361 264,552 120,000
3-1/8" 76 9-1/2" 170.7 254 260,143 118,000 3-1/16" 78 9-3/4" 268.8 400 291,007 132,000
3-1/4" 80 10" 184.1 274 284,393 129,000 3-7/16" 84 10-1/2" 314.5 468 339,508 154,000
3-5/8" 88 11" 230.5 343 357,145 162,000 3-11/16" 90 11-1/4" 372.9 555 401,237 182,000
4" 96 12" 278.2 414 436,511 198,000 4" 96 12" 432.1 643 460,761 209,000

Phone: +44 (0) 1323 444777 Fax: +44 (0) 1323 444744 Email: fibresales@bridon.com
www.bridon.com
0068-04 4/23/06 9:45 PM Page 1

65-06

PUGET SOUND ROPE


12 x 12 STRAND SYNTHETIC ROPE
High Strength • Low Stretch • Low Creep • Soft Hand • Torque Free • Easy Splicing • Floats
A high strength 12 x 12 strand synthetic rope manufactured from Spectra® Fiber enhanced by a patented
recrystallization process. This process is especially effective in medium to large diameter ropes where
strengths are over 50% higher and creep is significantly less than that of standard Spectra 12 strand ropes.
Twelve individual 12-strand ropes are braided together to form the final rope. This construction
provides higher translational efficiency, easier splicing, inspectability, and complete repairability.
The rope comes standard with a polyurethane finish and is easily spliced using a simple lockstitch type
splice, 4-3-2 or 5-4-3 Tuck splice. Its soft, torque-free braided construction provides easy handling.
It is used in heavy marine and offshore oil applications ranging from mooring lines to towing hawsers
and is suitable for tractor tugs in escort and ship assist work.
Nominal Size Approximate Minimum
Diameter Number Weight Tensile Strength
inch mm (circ) lbs./100ft. kg/100m lbs. kN
1-5/8 40 5 65.7 97.8 291,000 1294.4
1-3/4 44 5-1/2 78.4 116.7 314,000 1396.7
2 48 6 91.4 136.0 355,000 1579.1
2-1/8 52 6-1/2 109 162.2 428,000 1903.8 Specify gravity 0.98
2-1/4 56 7 122 181.6 481,000 2139.6 Melting point 284°F (140°C)
2-1/2 60 7-1/2 148 220.2 530,000 2357.7 Critical temperature 150°F (65°C)
2-5/8 64 8 167 248.5 596,000 2651.1 Coefficient of friction 0.09-0.12
2-3/4 68 8-1/2 187 278.3 660,000 2935.8 Elongation at break 4%-5%
3 72 9 214 318.5 780,000 3469.6 Fiber water absorption 0%
3-1/8 76 9-1/2 235 349.7 850,000 3780.8 UV resistance moderate
3-1/4 80 10 261 388.4 940,000 4181.3 Wet abrasion superior
3-5/8 88 11 324 482.2 1,250,000 5560.3 Dry abrasion superior
4 96 12 394 586.4 1,520,000 6761.3 DNV and ABS Type Approved Product
Spectra® is a registered trademark of Honeywell.

12 STRAND & 12 x 12 STRAND SYNTHETIC ROPE - BRAID OPTIMIZED FOR BENDING (BOB)
High Strength • Low Stretch • Ultra Low Creep • Soft Hand • Torque Free • Easy Splicing
Nominal Size Approximate Minimum Specific gravity 1.18*
Diameter Number Weight Tensile Strength Melting point 284° F (140°C)*
Critical temperature 150° F (65°C)*
12 STRAND

inch mm (circ) lbs./100ft. kg/100m lbs. kN


5/8 16 2 13.5 20.1 51,400 228.6 Coefficient of friction 0.12-0.15*
3/4 18 2-1/4 17.8 26.5 68,500 304.7 Elongation at break 4% - 5%
7/8 22 2-3/4 26.1 38.8 92,600 411.9 Fiber water absorbtion <0.1%
1 24 3 32.0 47.6 110,000 489.3 UV resistance moderate
1-1/8 28 3-1/2 43.2 64.3 147,000 653.9 Wet abrasion superior
Dry abrasion superior
1-1/4 30 3-3/4 45.2 67.3 165,000 733.9
1-5/16 32 4 55.2 82.1 196,000 871.8 *Value based on data supplied by the fiber
1-1/2 36 4-1/2 62.9 93.6 221,000 983.0 manufacturer for new, dry fiber.
1-5/8 40 5 85.1 126.6 291,000 1,294.4
12 x 12 STRAND

1-3/4 44 5-1/2 102.7 152.8 314,000 1,396.7 BOB BEND OVER SHEAVE TEST
2 48 6 124.9 185.9 355,000 1,579.0 Tests were performed on a 9” (229mm) diameter steel
2-1/8 52 6-1/2 146.6 218.2 428,000 1,903.8 sheave with 3/4” (18mm) diameter ropes. Test load was
2-1/4 56 7 168.4 250.6 481,000 2,139.5 7,500 lbs. (3,500kgs), cycled at a rate of 6 cycles per
minute. All tests were run until complete rope failure.
2-1/2 60 7-1/2 198.3 295.1 530,000 2,357.4
2-5/8 64 8 215.5 320.7 596,000 2,651.0 Rope Type Cycles
2-3/4 68 8-1/2 245.7 365.7 660,000 2,935.7 Aramid Wire Lay Core
with Braided Polyester Jacket 762
3 72 9 293.2 436.3 780,000 3,469.4
12 Strand HMPE
3-1/4 80 10 361.6 538.1 940,000 4,181.1
with Polyurethane Coating 5,782
Tensile Strengths are determined in accordance with Cordage Institute 1500, Test Methods for Fiber Rope. 12 Strand BOB 42,293
Weights are calculated at linear density under standard preload (200d2 ) plus 4%.

1012 Second Street


Anacortes, WA 98221 USA
Plasma® 12 x 12 Strand TEL: 360-293-8488
Polyester 12 Plait FAX: 360-293-8480
Nylon Double Braid www.psrope.com
sales@psrope.com
0067-04 4/23/06 9:46 PM Page 1

66-06

WHITEHILL MANUFACTURING CORP.


FLOATING FIBER ROPES
VETS 276 (Four Strand) Rope
The following data describes a series of floating, four-strand, right regular lay ropes. Each strand consists of a load-bearing
“Spectra” (2) core protected from abrasion by a non-load-bearing, braided jacket. The jacket is a combination of polyester and
aramid selected to provide abrasion protection under a variety of working conditions.
A rope should be selected based on its strength compared to the strength of other components in the system. The design strength
of deck hardware must be considered. In the event of an unavoidable severe overload, it is usually better to break a rope than to
fail some metal component.
Minimum Nominal Approximate
Part Break Strength Diameter Weight
Number (pounds) (inches) (lbs./100 ft.)
VETS 276-1 80,000 1-1/16 32
VETS 276-2 100,000 1-1/4 45
VETS 276-3 140,000 1-1/2 58
VETS 276-4 180,000 1-3/4 73
VETS 276-5 240,000 2 110
VETS 276-6 300,000 2-1/4 127
VETS 276-7 360,000 2-3/8 150
VETS 276-8 480,000 2-3/4 170 (2) “Spectra” is the trademark
VETS 276-9 600,000 3 200 for Honeywell’s HMPE fiber.
VETS 276-10 700,000 3-1/4 230
VETS 276-11 850,000 3-1/2 275
VETS 276-12 1,000,000 3-3/4 320

ARAMID FIBER ROPES


VETS 198 (Four Strand) Rope
The following data describes a series of four-strand, right regular lay ropes developed specifically for mooring lines. Each strand
consists of a load-bearing “Kevlar” (1) core protected from abrasion by a non-load-bearing, braided jacket. The jacket is a
combination of polyester and aramid selected to provide abrasion protection under a variety of working conditions.
A rope should be selected based on its strength compared to the strength of other components in the system. The design strength
of deck hardware must be considered. In the event of an unavoidable severe overload, it is usually better to break a rope than to
fail some metal component.
These ropes have been designed to break in a cascading or sequenced manner. During laboratory testing, under controlled
conditions the design failure mechanism has been shown effective in limiting the rate of energy release as the test rope broke. No
claim is made or implied that these ropes are safe or
Part Number Minimum Break Strength Diameter Linear Density free of snap-back. Safe rope-handling procedures
Pounds (KN) Inches (MM) Lbs./100' (Kg/100M) should always be practiced.
VETS 198-10 50000 (222) 1-1/16 (25) 33 (49)
VETS 198-4 60000 (267) 1-1/8 (27) 37 (55)
VETS 198-3 70000 (311) 1-3/16 (29) 42 (62)
VETS 198-2 96000 (427) 1-5/16 (32) 51 (75)
VETS 198-1 135000 (601) 1-1/2 (38) 66 (98)
VETS 198-5 180000 (801) 1-3/4 (44) 86 (128)
VETS 198-6 225000 (1000) 1-7/8 (48) 113 (168)
VETS 198-7 280000 (1245) 2 (51) 142 (211)
VETS 198-8 350000 (1557) 2-7/16 (60) 174 (259)
VETS 198-9 420000 (1868) 2-5/8 (67) 210 (312)
VETS 198-11 500000 (2220) 2-3/4 (70) 250 (370)
VETS 198-12 600000 (2670) 3 (76) 300 (450)
VETS 198-13 700000 (3110) 3-1/4 (83) 350 (520) (1) “Kevlar” is the trademark
VETS 198-14 885000 (3780) 3-5/8 (93) 440 (654) for DuPont’s aramid fiber.
VETS 198-15 1000000 (4450) 3-3/4 (95) 500 (740)

For additional information on VETSTRAN Rope is available from Telephone:


3 strand Kevlar and Spectra ropes,
4 strand Polyester and Nylon ropes,
Whitehill Manufacturing Corporation (610) 494-2378
P.O. Box 356, Lima, PA 19037 • 2540 Green St., Chester, PA 19013 Fax:
visit us at www.whitehillmfg.com
E-Mail: whitehill@whitehillmfg.com • Web: www.whitehillmfg.com (610) 494-6680
Serving the Commercial Marine and Offshore Industries with Standard and Custom Designed Rope and Cable
3008 4/23/06 9:47 PM Page 1

67-06

KATRADIS MARINE ROPES INDUSTRY S.A.


MOORING & ANCHORING ROPES FOR TANKERS
24-Strand Single-Braided Polyester/Nikasteel® Combination
These ropes have low friction coefficient, and the polyester cover yarns offer excellent resistance to abrasion, sunlight, and
chemicals. The ropes have good resistance to cyclic loading and maintain the same performance wet or dry. They are user friendly,
rotation resistant and easy to splice.
Two types are available:
25/75% Mixed Nikasteel
Constructed by covering the outer layer of Nikasteel strands with polyester yarns at a 75%-25% proportion, respectively.
Rope has a green stripe.
40/60% Improved Mixed Nikasteel
Constructed by covering the outer layer of Nikasteel strands with polyester yarns at a 60%-40% proportion respectively,
according to American Cordage Institute CI1302B-99 specification. Rope has a blue stripe.
Size Mixed Nikasteel Improved Mixed Nikasteel
Weight/ Min Breaking Weight/ Min Breaking
Circ. Diam.
meter Load 220mtrs Load
(inch) (mm) (Tons*) (Tons*)
(Kilos +/-5%) (Kilos +/-5%)
Nikasteel®: 5 40 165 29 190 32
5-1/2 44 200 36 215 38
Melt mixture of 6 48 235 42 275 44
prime polypropylene, 6-1/2 52 275 48 310 51
polyethylene, UV and 7 56 320 55 342 59
7-1/2 60 365 62 420 67
other special additives. 8 64 420 71 458 76
9 72 525 90 587 95
10 80 645 109 706 116
11 88 785 126 842 138
12 96 930 151 1020 162
13 104 1110 172 1177 192
Specific Gravity 0,94 (Floating) 0,99 (Floating)
Melting point 185° C 185° C
Elongation
15% 15%
at breaking

Double-Braided Polyester/Nikasteel Combination Size Weight/ Min Breaking


Circ. Diam. meter Load
Constructed by braiding a 32/64-strand polyester sheath (inch) (mm) (Kilos +/-5%) (Tons*)
(or jacket) over a hollow 24-strand Nikasteel core rope. 5 40 0,94 31
5-1/2 44 1,13 37
These ropes have low friction coefficient, and the polyester 6 48 1,35 44
jacket offers excellent resistance to abrasion, sunlight, and 6-1/2 52 1,58 53
7 56 1,80 60
chemicals. They have good resistance to cyclic loading 7-1/2 60 2,12 69
and maintain the same performance wet or dry. They are 8 64 2,44 80
user friendly, rotation resistant and easy to splice. Their 9 72 3,04 101
larger contact area reduces the fatigue on the rope when it 10 80 3,76 123
spools and when passing through fairleads. 11 88 4,54 151
12 96 5,33 172
When ordering, specify: 13 104 6,34 210
Hard (for use with automatic winches) or 14 112 7,35 244
Soft (for manual handling) 15 120 8,46 278
Rope has a blue stripe. Specific gravity: 0,99 (Floating)
Melting point: 185° C (Nikasteel); 256° C (Poly)
Elongation at breaking: 14%
*Tons = metric tons (2201 lbs.)
Recommended Working Load Limit for all the ropes shown on this page is 20% of Minimum Breaking Load.
All the ropes shown on this page comply with the latest regulations and recommendations of O.C.I.M.F.
for the safe mooring of tankers.

KATRADIS Marine Ropes Industry S.A.


Head Office: 11 Psarron Str., 186 48 Piraeus, Greece
Phone: +30210 4060 300 • Fax: +30210 4626 268
URL: www.katradis.com • E-mail: sales@katradis.com
ESTABLISHED 1936
0083-04 4/23/06 9:48 PM Page 1

68-06

SHACKLES AND LINKS

MODEL 90T 120T 180T


Tønsberg Forerunner
Mooring Link Circ. (inches) 7-9 9 - 11 11 - 15
A (mm) 285 324 350
R B (mm) 115 142 184
Galvanized steel mooring link of
C (mm) 136 150 160
compact design typically utilized A D (mm) 65 75 85
D
as connection between wire rope E (mm) 75 90 120
and fiber forerunner. R (mm) 22 28 30
Sizes: Breaking Load
90 120 180
M/Tons
90, 120, 180 & 300 M/Tons.
Proof Load
55 70 95
M/Tons
E
Each link is individually proof Safe Working
B C Load M/Tons 30 40 60
tested under control by DnV.
11,2 kg 16,9 kg 25 kg
Note: Fiber Rope in the bolt. Weight (25 lbs.) (37 lbs.) (55 lbs.)
Wire Rope around the body.

MODEL 90 M 120 M
Mandal Forerunner
Circ. inches 6-9 9 - 11
Fairlead Shackle A (mm) 255 310
B (mm) 97 121
Stainless steel mooring shackle C (mm) 120 130
with sleek shape designed to D (mm) 65 82
pass through fairleads. E (mm) 67 90
Sizes: F (mm) 100 128
90, 120 & 300 M/Tons. R (mm) 34 45
Breaking Load
M/Tons 90 120
Each shackle is individually proof Proof Load
tested under control by DnV. M/Tons 55 70
Safe Working
Note: Wire Rope in the sheave. Load M/Tons 30 40
Fiber Rope around the body. 7,8 kg 13,3 kg
Weight
(17.2 lbs.) (29 lbs.)

ROPE (ALL)
WIRE ROPE
HENRY STEWART COMPANY
601 Conestoga Road, Villanova, PA 19085
LASHING WIRE & GEAR
CHAIN
CASAR WIRE Warehouse: 1121-29 North Delaware Ave., Philadelphia, PA 19125 FITTINGS & HARDWARE
SLINGS Philadelphia – Tel: 215-426-0600 • Fax: 215-425-6970 MARINE PAINT
Villanova – Tel: 610-687-1212 • Fax: 610-687-0912
SPLICING hstewartco@aol.com • www.henrystewartcompany.com WINCHES & HOISTS
0082-04 4/23/06 9:49 PM Page 1

69-06

ROPE FENDERS
Manila or Polypropylene (Specify when ordering)

No. 2414
BALL SHAPED
ROPE FENDER

Length--24”
Diameter--14”

Cylindrical
Rope
Fender

CYLINDRICAL ROPE FENDERS


Sizes 150--153: 3/4” Rope Style Rope Diam. L Style Rope Diam. L
Sizes 154--158: 1” Rope 150-A 3/4” 22” x 30” 158-A 1” 38” x 42”
151-A 3/4” 24” x 30” 159-A 1-1/4” 40” x 44”
Sizes 159--165: 1-1/4” Rope 152-A 3/4” 26” x 32” 160-A 1-1/4” 42” x 46”
153-A 3/4” 28” x 34” 161-A 1-1/4” 44” x 52”
154-A 1” 30” x 36” 162-A 1-1/4” 48” x 60”
155-A 1” 32” x 38” 163-A 1-1/4” 48” x 72”
156-A 1” 34” x 40” 164-A 1-1/4” 50” x 60”
157-A 1” 36” x 40” 165-A 1-1/4” 50” x 72”

GANGWAY NETS
Mesh Openings: 4” x 4”
Mesh Rope: #120 Nylon Twine (1130 lb. TEST)
Border Rope: 5/8” Polypropylene
Lanyard Rope: 5/8” Polypropylene
Option: Safetyline Snap Hooks

Size No. of Lanyard Stock Code


10’ x 20’ 4 1020
15’ x 20’ 4 1520
20’ x 20’ 6 2020
25’ x 20’ 6 2520
For sizes not shown on chart at right,
30’ x 20’ 8 3020
specify net dimensions & mesh desired.
40’ x 20’ 10 4020

ROPE (ALL)
WIRE ROPE
HENRY STEWART COMPANY
601 Conestoga Road, Villanova, PA 19085
LASHING WIRE & GEAR
CHAIN
CASAR WIRE Warehouse: 1121-29 North Delaware Ave., Philadelphia, PA 19125 FITTINGS & HARDWARE
SLINGS Philadelphia – Tel: 215-426-0600 • Fax: 215-425-6970 MARINE PAINT
Villanova – Tel: 610-687-1212 • Fax: 610-687-0912
SPLICING hstewartco@aol.com • www.henrystewartcompany.com WINCHES & HOISTS
72 - 04 4/23/06 9:50 PM Page 1

70-06

MARINE FENDERS INTERNATIONAL


STANDARD CAPACITY FOAM FILLED FENDERS
WITH CHAIN & AIRCRAFT TIRE NETS
Constructed with aircraft tires, heavy-duty rubber tubing and chains that are connected at every intersection with a
shackle for added strength and resilience.

ENGLISH SIZES
FENDER STAND OFF STANDARD CAPACITY
FENDER
SIZE Diameter Energy Absorption Reaction Force
MODEL English Metric Uncompressed @ 60% Compression @ 60% Compression
Ft x Ft MxM Ft M Ft - Kips Ton-M Kips Tons
OC-3X6 3x6 0.92 x 1.83 4.1 1.2 37 5 61 28
OC-4X6 4x6 1.22 x 1.83 5.3 1.6 66 9 72 33
OC-4X8 4x8 1.22 x 2.44 5.3 1.6 88 12 107 49
OC-5X10 5 x 10 1.53 x 3.05 6.5 2.0 176 24 167 76
OC-5X16 5 x 16 1.53 x 4.88 6.5 2.0 306 42 291 132
OC-6X12 6 x 12 1.83 x 3.66 7.5 2.3 295 41 232 105
OC-7X14 7 x 14 2.13 x 4.27 8.5 2.6 477 66 322 146
• Thick nylon-filament-reinforced OC-8X12 8 x 12 2.44 x 3.66 9.8 3.0 520 72 206 93
polyurethane skin OC-8X16 8 x 16 2.44 x 4.88 9.8 3.0 718 99 406 184
• Nylon tire cord is applied in a OC-9X14 9 x 14 2.75 x 4.27 10.8 3.3 740 102 292 132
helix pattern during the coating OC-9X18 9 x 18 2.75 x 5.49 10.8 3.3 980 136 469 213
that embeds the filament into OC-10X16 10 x 16 3.05 x 4.88 11.8 3.6 1,048 145 478 217
the skin OC-10X20 10 x 20 3.05 x 6.10 11.8 3.6 1,377 190 635 288
OC-11X18 11 x 18 3.35 x 5.49 12.8 3.9 1,407 195 596 270
• Durable to all weather, forces
OC-11X22 11 x 22 3.35 x 6.71 12.8 3.9 1,814 251 769 349
and marine conditions
OC-12X24 12 x 24 3.70 x 7.30 13.8 4.2 2,336 323 944 428
• Heat-laminated, 100% closed-cell OC-13X26 13 x 26 3.96 x 7.90 14.8 4.5 2,916 403 1,094 496
foam core OC-14X28 14 x 28 4.27 x 8.53 15.8 4.8 3,594 497 1,255 569
• Uses no adhesives, which can
decompose over time
METRIC SIZES
FENDER STAND OFF STANDARD CAPACITY
FENDER
SIZE Diameter Energy Absorption Reaction Force
MODEL
Metric English Uncompressed @ 60% Compression @ 60% Compression
MxM Ft x Ft Ft M Ft - Kips Ton - M Kips Tons
OCM-1X1.5 1.00 x 1.50 3.3 x 4.9 4.4 1.3 35 5 50 23
OCM-1X2 1.00 x 2.00 3.3 x 6.6 4.4 1.3 50 7 74 34
OCM-1.2X2 1.20 x 2.00 3.9 x 6.6 5.3 1.6 67 9 81 37
OCM-1.3X2.5 1.35 x 2.50 4.4 x 8.2 5.9 1.8 109 15 117 53
OCM-1.5X3 1.50 x 3.00 4.9 x 9.8 6.4 2.0 162 22 162 73
OCM-1.7X3 1.70 x 3.00 5.6 x 9.8 7.1 2.2 203 28 173 78
OCM-2X3.5 2.00 x 3.50 6.6 x 11.5 8.1 2.5 326 45 246 112
OCM-2X4 2.00 x 4.00 6.6 x 13.1 8.1 2.5 383 53 259 117
OCM-2.2X4.5 2.20 x 4.50 7.2 x 14.8 8.7 2.7 518 72 354 161
OCM-2.5X4 2.50 x 4.00 8.2 x 13.1 10.0 3.0 579 80 336 152
OCM-2.5X5.5 2.50 x 5.50 8.2 x 18.0 10.0 3.0 867 120 502 228
OCM-3X6 3.00 x 6.00 9.8 x 19.7 11.6 3.5 1,283 177 645 293
OCM-3.3X4.5 3.30 x 4.50 10.8 x 14.8 12.6 3.8 1,049 145 475 215
OCM-3.3X6.5 3.30 x 6.50 10.8 x 21.3 12.6 3.8 1,676 232 749 340
OCM-3.3X10.6 3.30 x 10.6 10.8 x 34.8 12.6 3.8 2,862 396 1,300 590
OCM-4.2X8.4 4.20 x 8.40 13.8 x 27.6 15.6 4.8 3,461 479 1,208 548
*Actual values for above sizes may vary +/- 15% due to variations in materials, speed of compression, temperatures and tolerances.

• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0073-04 4/23/06 9:51 PM Page 1

71-06

MARINE FENDERS INTERNATIONAL


NETLESS FOAM-FILLED FENDERS
STANDARD CAPACITY
FENDER SIZE Energy Absorption Reaction Force Safe Working
FENDER
MODEL English Metric At 60% Compression At 60% Compression End Pull Load
Ft x Ft MxM Ft - Kips Ton - M Kips Tons Kips kN
OG-2X4 2x4 0.6 x 1.2 11 2 20 9 9.5 42
OG-2X6 2x6 0.6 x 1.8 18 3 33 15 9.5 42
OG-2X8 2x8 0.6 x 2.4 25 4 47 21 9.5 42
OG-2X10 2 x 10 0.6 x 3.0 32 4 60 27 9.5 42
OG-3X5 3x5 0.9 x 1.5 31 4 45 20 9.5 42
OG-3X6 3x6 0.9 x 1.8 39 5 48 22 9.5 42
OG-3X8 3x8 0.9 x 2.4 55 8 68 31 17 76
OG-3X10 3 x 10 0.9 x 3.0 71 10 88 40 17 76
OG-3X12 3 x 12 0.9 x 3.7 87 12 108 49 17 76
OG-3X14 3 x 14 0.9 x 4.3 103 14 128 58 17 76
OG-4X6 4x6 1.2 x 1.8 60 8 56 26 17 76
OG-4X8 4x8 1.2 x 2.4 89 12 83 38 17 76
OG-4X10 4 x 10 1.2 x 3.0 118 16 111 50 17 76
OG-4X12 4 x 12 1.2 x 3.7 146 20 136 62 34 151
OG-4X16 4 x 16 1.2 x 4.9 203 28 189 86 34 151
OG-4X20 4 x 20 1.2 x 6.1 260 36 242 110 34 151
OG-5X8 5x8 1.5 x 2.4 135 18 100 45 17 76
Constructed with a heat-laminated, 100% OG-5X10 5 x 10 1.5 x 3.0 180 25 134 61 34 151
closed-cell foam core that is high energy OG-5X12 5 x 12 1.5 x 3.7 225 31 167 75 34 151
OG-5X14 5 x 14 1.5 x 4.3 269 37 200 91 34 151
absorbing, has a low reaction force and OG-5X16 5 x 16 1.5 x 4.9 313 43 233 106 34 151
cannot be ruptured. The fabrication OG-5X18 5 x 18 1.5 x 5.5 357 49 266 121 70 311
process uses no adhesives, which can OG-6X12 6 x 12 1.8 x 3.7 300 41 186 84 34 151
decompose over time. OG-6X14 6 x 14 1.8 x 4.3 364 50 225 102 34 151
OG-6X16 6 x 16 1.8 x 4.9 427 59 265 120 70 311
Skin is constructed of tough, thick nylon- OG-6X18 6 x 18 1.8 x 5.5 491 68 305 138 70 311
filament-reinforced polyurethane. Nylon OG-6X20 6 x 20 1.8 x 6.1 554 77 344 156 70 311
tire cord is applied during the coating in a OG-7X14 7 x 14 2.1 x 4.3 487 67 259 117 70 311
helix pattern that embeds the filament into OG-7X16 7 x 16 2.1 x 4.9 574 79 305 138 70 311
the skin. This makes the skin extremely OG-7X18 7 x 18 2.1 x 5.5 660 91 351 159 70 311
durable to all weather, forces and marine OG-7X20 7 x 20 2.1 x 6.1 747 103 397 180 70 311
conditions. OG-7X22 7 x 22 2.1 x 6.7 833 115 443 201 70 311
OG-8X12 8 x 12 2.4 x 3.7 531 73 246 111 70 311
The integral swivel end fittings provide OG-8X14 8 x 14 2.4 x 4.3 619 85 288 130 70 311
secure point of attachment without OG-8X16 8 x 16 2.4 x 4.9 733 101 341 155 70 311
obstructing, even when the fender is OG-8X18 8 x 18 2.4 x 5.5 847 117 394 179 70 311
compressed. Fittings are constructed of OG-8X20 8 x 20 2.4 x 6.1 961 133 447 203 70 311
top quality steel. OG-8X22 8 x 22 2.4 x 6.7 1,075 149 500 227 110 489
OG-9X14 9 x 14 2.7 x 4.3 779 108 322 146 70 311
A heavy-duty, internal stud link chain OG-9X16 9 x 16 2.7 x 4.9 890 123 368 167 70 311
connects the integral swivel end fittings. OG-9X18 9 x 18 2.7 x 5.5 1,032 143 427 194 70 311
The internal chain guarantees maximum OG-9X20 9 x 20 2.7 x 6.1 1,175 163 486 220 110 489
pull-through strength and even distribution OG-9X22 9 x 22 2.7 x 6.7 1,318 182 545 247 110 489
of energy and stresses. OG-10X16 10 x 16 3.0 x 4.9 1,081 150 402 182 70 311
OG-10X18 10 x 18 3.0 x 5.5 1,258 174 468 212 70 311
These fenders are constructed to current OG-10X20 10 x 20 3.0 x 6.1 1,435 198 534 242 110 489
U.S. Navy & Coast Guard specifications. OG-10X22 10 x 22 3.0 x 6.7 1,612 223 600 272 110 489
OG-10X24 10 x 24 3.0 x 7.3 1,811 250 674 306 110 489
OG-11X18 11 x 18 3.4 x 5.5 1,482 219 501 265 110 489
OG-11X20 11 x 20 3.4 x 6.1 1,696 241 573 279 110 489
OG-11X22 11 x 22 3.4 x 6.7 1,910 264 646 293 110 489
OG-11X24 11 x 24 3.4 x 7.3 2,083 288 704 319 110 489
OG-12X20 12 x 20 3.7 x 6.1 2,163 299 708 321 110 489
OG-12X24 12 x 24 3.7 x 7.3 2,595 358 850 385 110 489
OG-13X26 13 x 26 4.0 x 7.9 3,240 448 985 447 110 489
OG-14X28 14 x 28 4.3 x 8.5 4,000 553 1,130 513 110 489
*Actual values for above sizes may vary +/- 15% due to variations in materials, speed of compression,
temperature and tolerances.

• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
74 - 04 4/24/06 11:13 PM Page 1

72-06

MARINE FENDERS INTERNATIONAL


MONOPILE DONUT FLOATING FENDER
This fendering system provides a floating energy-absorbing foam-filled fender. It is designed to simply slip over a
stationary monopile and float at the fluctuating water line, rotating freely upon contact with a ship or vessel and adjusting
with the changing water level. The rotating feature makes it suitable for turning dolphins and eliminates shear forces.
Where there are large or extreme tidal fluctuations, a mooring crown can be constructed into the fender to allow safe
moorage during the tidal swings. This can also be accomplished when the fender is compressed.

• Thick filament nylon tire cord STANDARD CAPACITY


reinforced non-marking FENDER PILE FLAT ENERGY REACTION
urethane skin FENDER
DIAMETER DIAMETER LENGTH ABSORPTION FORCE
MODEL
• 100% closed cell heat- Ft M Ft M Ft M Ft - Kips Ton - M Kips Tons
laminated energy absorbing MD-4.5X2 4.5 1.4 2 0.6 2 0.6 4 0.6 18 8.2
foam core MD-4.5X3 4.5 1.4 2 0.6 3 0.9 6 0.8 27 12.2
MD-4.5X4 4.5 1.4 2 0.6 4 1.2 8 1.1 35 15.9
• Internal structural steel core MD-4.5X5 4.5 1.4 2 0.6 5 1.5 10 1.4 44 20.0
• Anti-friction bearing pads MD-4.5X6 4.5 1.4 2 0.6 6 1.8 12 1.7 53 24.0
MD-4.5X7 4.5 1.4 2 0.6 7 2.1 14 1.9 62 28.1
• High energy absorption with MD-4.5X8 4.5 1.4 2 0.6 8 2.4 16 2.2 71 32.2
low reaction force MD-5X2 5 1.5 2.5 0.8 2 0.6 5 0.7 21 9.5
• Burst resistant construction MD-5X3 5 1.5 2.5 0.8 3 0.9 7 1.0 31 14.1
MD-5X4 5 1.5 2.5 0.8 4 1.2 10 1.4 41 18.6
• Unsinkable – buoyant
MD-5X5 5 1.5 2.5 0.8 5 1.5 12 1.7 52 23.6
MD-5X6 5 1.5 2.5 0.8 6 1.8 15 2.1 62 28.1
MD-5X7 5 1.5 2.5 0.8 7 2.1 17 2.4 72 32.7
MD-5X8 5 1.5 2.5 0.8 8 2.4 20 2.8 83 37.6
MD-6X2 6 1.8 3 0.9 2 0.6 7 1.0 24 10.9
MD-6X3 6 1.8 3 0.9 3 0.9 11 1.5 35 15.9
MD-6X4 6 1.8 3 0.9 4 1.2 14 1.9 47 21.3
MD-6X5 6 1.8 3 0.9 5 1.5 18 2.5 59 26.8
MD-6X6 6 1.8 3 0.9 6 1.8 21 2.9 71 32.2
MD-6X7 6 1.8 3 0.9 7 2.1 25 3.5 83 37.6
MD-6X8 6 1.8 3 0.9 8 2.4 29 4.0 94 42.6
MD-7X3 7 2.1 3.5 1.1 3 0.9 15 2.1 40 18.1
MD-7X4 7 2.1 3.5 1.1 4 1.2 19 2.6 53 24.0
MD-7X5 7 2.1 3.5 1.1 5 1.5 24 3.3 66 29.9
MD-7X6 7 2.1 3.5 1.1 6 1.8 29 4.0 80 36.3
MD-7X7 7 2.1 3.5 1.1 7 2.1 34 4.7 93 42.2
MD-7X8 7 2.1 3.5 1.1 8 2.4 39 5.4 106 48.1
MD-7.5X3 7.5 2.3 4 1.2 3 0.9 17 2.4 44 20.0
MD-7.5X4 7.5 2.3 4 1.2 4 1.2 22 3.0 59 26.8
MD-7.5X5 7.5 2.3 4 1.2 5 1.5 28 3.9 74 33.6
MD-7.5X6 7.5 2.3 4 1.2 6 1.8 33 4.6 89 40.4
MD-7.5X7 7.5 2.3 4 1.2 7 2.1 39 5.4 103 46.7
MD-7.5X8 7.5 2.3 4 1.2 8 2.4 45 6.2 118 53.5
MD-8.25X3 8.25 2.5 4.5 1.4 3 0.9 20 2.8 49 22.2
MD-8.25X4 8.25 2.5 4.5 1.4 4 1.2 27 3.7 65 29.5
MD-8.25X5 8.25 2.5 4.5 1.4 5 1.5 33 4.6 81 36.7
MD-8.25X6 8.25 2.5 4.5 1.4 6 1.8 40 5.5 97 44.0
MD-8.25X7 8.25 2.5 4.5 1.4 7 2.1 47 6.5 114 51.7
MD-8.25X8 8.25 2.5 4.5 1.4 8 2.4 54 7.5 130 59.0
MD-9X3 9 2.7 5 1.5 3 0.9 24 3.3 53 24.0
MD-9X4 9 2.7 5 1.5 4 1.2 32 4.4 71 32.2
MD-9X5 9 2.7 5 1.5 5 1.5 40 5.5 89 40.4
MD-9X6 9 2.7 5 1.5 6 1.8 48 6.6 106 48.1
MD-9X7 9 2.7 5 1.5 7 2.1 56 7.7 124 56.2
MD-9X8 9 2.7 5 1.5 8 2.4 64 8.9 142 64.4
*Actual values for above sizes may vary +/- 15% due to variations in materials, speed of compression, temperatures and tolerances.

Fender performance is engineered at 60% foam compression. The monopile deflection provides
additional energy absorption for the same reaction force rating.

• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0075-05 4/25/06 10:21 AM Page 1

73-06

MARINE FENDERS INTERNATIONAL

SSD SMALL STANDARD DUTY FENDERS

National Energy Absorption Reaction Force


FENDER
SIZE Stock at 60% Compression at 60% Compression
MODEL
IN MM Number Ft-Lbs Ton-Meters Lbs Tons
SSD-16X36 16 x 36 400 x 900 2040-00-821-0808 2,000 0.28 10,500 4.76
SSD-20X36 20 x 36 508 x 900 N/A 2,900 0.40 11,500 5.21
SSD-20X48 20 x 48 508 x 1200 N/A 3,850 0.53 15,400 6.99
SSD-24X36 24 x 36 600 x 900 2040-00-807-4197 4,000 0.55 16,000 7.25
• Low reaction foam core
• Reinforced urethane skin SSD-32X50 32 x 50 800 x 1250 2040-00-128-7982 12,000 1.66 30,000 13.61
• Pad eye end fittings SSD-36X60 36 x 60 900 x 1500 N/A 22,000 3.00 33,000 15.00
• Integral chain option
SHD SMALL HEAVY DUTY FENDERS
• Standard capacity Energy Absorption Reaction Force
foam core FENDER
SIZE at 60% Compression at 60% Compression
MODEL
• Thicker reinforced IN MM Ft-Kips Ton-Meters Kips Tons
urethane skin SHD-24X48 24 x 48 600 x 1200 11 1.5 20 9
• Integral swivel SHD-28X60 28 x 60 700 x 1500 19 2.6 30 14
end fittings SHD-32X56 32 x 56 800 x 1422 31 4.3 45 20
• Heavy duty SHD-36X60 36 x 60 900 x 1500 32 4.3 45 20
internal chain SHD-40X60 40 x 60 1000 X 1500 35 2.6 39 18

UNIVERSAL BUOYS
General-purpose marine buoys engineered to accommodate a variety of
interchangeable end-fitting options such as:
• Bail Eye • Swivel Eye • Clevis Eye • Mooring Tee
CONSTRUCTION FEATURES:
• Central steel strength member
• Heat-laminated, closed-cell rigid urethane flotation foam
• Abrasion-resistant filament nylon-reinforced urethane skin
• Non-marking
• Puncture resistant
• Unsinkable
• Corrosion resistant

BUOY Net Buoyancy (Min) Buoy Weight Body Diameter Body Height Overall Height
MODEL LBS KG LBS KG FT M FT M FT M
UB-1500 1,500 680 710 322 4.2 1.3 2.5 0.8 4.3 1.3
UB-2000 2,000 907 801 363 4.2 1.3 3.3 1.0 5.5 1.7
UB-2500 2,500 1,134 689 313 5.0 1.5 2.9 0.9 5.0 1.5
UB-3000 3,000 1,361 929 421 5.0 1.5 3.3 1.0 5.5 1.7
UB-4000 4,000 1,814 1,488 675 6.0 1.8 3.3 1.0 5.5 1.7
UB-5000 5,000 2,268 1,570 712 6.0 1.8 3.8 1.1 6.0 1.8
*Actual values for above sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.

• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0077-04 4/25/06 10:22 AM Page 1

74-06

MARINE FENDERS INTERNATIONAL


MOORING AND PENDANT BUOYS
CONSTRUCTION FEATURES:
• Central steel strength member
• Heat-laminated, impact-absorbing, closed-cell, rigid urethane flotation foam
• Abrasion-resistant, filament nylon-reinforced urethane elastomer skin
• Internal radar reflectors
• Non-marking END-FITTING OPTIONS:
• Puncture resistant • Mooring Tee
• Unsinkable • Quick Release Hook
MOORING BUOYS • Corrosion resistant • Hawser Pipe

BUOY BUOYANCY BUOY DIAMETER HEIGHT HEIGHT WORKING


MODEL NET WEIGHT OVERALL BUOY BODY OVERALL LOAD
Lbs Kg Lbs Kg Ft M Ft M Ft M Lbs Tons
MB-5 5,000 2,268 1,900 862 6.1 1.9 4.2 1.3 7.6 2.3 100,000 45
MB-8 8,000 3,629 2,650 1,202 7.0 2.1 5.0 1.5 8.6 2.6 150,000 68
MB-11 11,000 4,990 3,400 1,542 8.1 2.5 5.0 1.5 8.6 2.6 150,000 68
MB-15 15,000 6,804 4,100 1,860 9 2.7 5.0 1.5 8.6 2.6 200,000 91
MB-20 20,000 9,072 5,100 2,313 9.8 3.0 5.5 1.7 9.0 2.7 200,000 91
MB-25 25,000 11,340 5,395 2,447 10.1 3.1 6.0 1.8 9.5 2.9 200,000 91
MB-30 30,000 13,608 6,500 2,948 10.6 3.2 6.5 2.0 10.0 3.0 300,000 136
MB-35 35,000 15,876 7,500 3,402 11.1 3.4 6.8 2.1 10.4 3.2 300,000 136
MB-40 40,000 18,144 7,850 3,561 11.8 3.6 6.8 2.1 10.4 3.2 300,000 136
MB-50 50,000 22,680 8,700 3,946 12.0 3.7 8.1 2.5 11.6 3.5 300,000 136
MB-55 55,000 24,948 9,246 4,194 12.5 3.8 8.2 2.5 11.7 3.6 300,000 136
MB-60 60,000 27,216 10,200 4,627 13.0 4.0 8.5 2.6 12.4 3.8 300,000 136
MB-75 75,000 34,020 12,100 5,489 13.2 4.0 9.3 2.8 13.5 4.1 300,000 136
MB-100 100,000 45,360 17,000 7,711 13.5 4.1 12.8 3.9 16.8 5.1 300,000 136
*Actual values for above sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.

PENDANT BUOYS
BUOY BUOYANCY BUOY DIAMETER BUOY HEIGHT WORKING
MODEL NET WEIGHT OVERALL LENGTH OVERALL LOAD
Lbs Kg Lbs Kg Ft M Ft M Ft M Lbs Tons
PB-25 5,511 2,500 1,223 555 4.5 1.4 6.8 2.1 7.3 2.2 150,000 68
PB-50 11,023 5,000 2,123 963 6.0 1.8 7.2 2.2 8.7 2.7 150,000 68
PB-75 16,534 7,500 3,184 1,444 6.5 2.0 9.2 2.8 9.2 2.8 150,000 68
PB-100 22,046 10,000 4,197 1,904 7.0 2.1 11.0 3.4 9.9 3.0 150,000 68
PB-150 33,069 15,000 5,351 2,427 8.0 2.4 12.0 3.7 10.9 3.3 150,000 68
PB-200 44,092 20,000 7,152 3,244 8.6 2.6 13.6 4.1 11.5 3.5 200,000 91
PB-250 55,115 25,000 9,312 4,224 9.4 2.9 13.7 4.2 12.3 3.7 200,000 91
PB-300 66,138 30,000 11,175 5,069 10.0 3.0 14.5 4.4 12.9 3.9 200,000 91
PB-350 77,160 35,000 13,037 5,914 10.3 3.1 16.0 4.9 13.3 4.1 250,000 114
PB-400 88,183 40,000 14,899 6,758 10.4 3.2 18.0 5.5 13.4 4.1 250,000 114
MODULAR ANCHOR PENDANT BUOYS
BUOY BUOYANCY NUMBER DIAMETER THROUGH
MODEL NET OF OVERALL PIPE DIAMETER
LBS KG MODULES FT M IN MM
MAPB2-4 8,818 4,000 2 6.6 2.0 6.0 152
MAPB4-8 17,637 8,000 4 6.6 2.0 6.0 152
MAPB2-8 17,637 8,000 2 7.5 2.3 6.0 152
MAPB4-16 35,273 16,000 4 7.5 2.3 6.0 152
MAPB2-11 24,250 11,000 2 9.8 3.0 8.0 203
MAPB4-22 48,501 22,000 4 9.8 3.0 8.0 203
MAPB2-17 37,478 17,000 2 10.5 3.2 10.0 254
MAPB4-34 74,956 34,000 4 10.5 3.2 10.0 254
MAPB2-23 50,705 23,000 2 10.5 3.2 10.0 254
MAPB4-46 101,411 46,000 4 10.5 3.2 10.0 254
*Actual values for above sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0078-04 4/25/06 10:23 AM Page 1

75-06

MARINE FENDERS INTERNATIONAL


SEMI SPHERICAL SUPPORT BUOYS
Designed to provide greater buoyancy than a same-sized spherical buoy. Equipped with galvanized swivel eyes on
each end, which are connected to a high pull-through central steel strength member. Typical applications include use
as marker buoys, hose pickup buoys, rope pickup buoys, and small anchor pendant buoys.
CONSTRUCTION FEATURES:
• Central steel strength member
• Heat-laminated, impact-absorbing, closed-cell, rigid urethane flotation foam
• Abrasion-resistant, filament nylon-reinforced urethane elastomer skin
• Non-marking
• Puncture resistant OPTIONS: END-FITTINGS:
• Unsinkable • Navigational light • Mooring Tee
• Corrosion resistant • Internal radar deflector • Quick Release Hook
• Hawser Pipe
BUOY BUOYANCY BUOY DIAMETER HEIGHT WORKING
MODEL NET WEIGHT OVERALL OVERALL LOAD
Lbs Kg Lbs Kg Ft M Ft M Lbs Tons
SB-25 551 250 200 91 2.6 0.8 2.6 0.8 22,000 10
SB-50 1,102 500 385 175 3.2 1.0 3.2 1.0 22,000 10
SB-75 1,653 750 390 177 3.5 1.1 3.5 1.1 22,000 10
SB-100 2,205 1,000 640 290 4.0 1.2 4.0 1.2 40,000 18
SB-125 2,756 1,250 597 271 4.2 1.3 4.2 1.3 40,000 18
SB-150 3,307 1,500 730 331 4.5 1.4 4.5 1.4 40,000 18
SB-175 3,858 1,750 866 393 4.8 1.5 4.8 1.5 40,000 18
SB-200 4,409 2,000 980 445 5.0 1.5 5.0 1.5 40,000 18
SB-250 5,511 2,500 1,228 557 5.4 1.6 5.4 1.6 40,000 18
SB-300 6,614 3,000 1,285 583 5.6 1.7 5.6 1.7 45,000 20
SB-350 7,716 3,500 1,394 632 5.8 1.8 5.8 1.8 45,000 20
SB-400 8,818 4,000 1,500 680 6.0 1.8 6.0 1.8 45,000 20
SB-450 9,921 4,500 1,682 763 6.3 1.9 6.3 1.9 45,000 20
SB-500 11,023 5,000 1,897 860 6.5 2.0 6.5 2.0 45,000 20
SB-600 13,228 6,000 2,262 1,026 6.9 2.1 6.9 2.1 45,000 20
SB-700 15,432 7,000 2,640 1,198 7.3 2.2 7.3 2.2 45,000 20
Actual values for all sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.

CYLINDRICAL UTILITY BUOYS


Smaller buoys designed for general-purpose marine applications.
Same construction features as support buoys above.

BUOY BUOYANCY BUOY DIAMETER HEIGHT WORKING


MODEL NET WEIGHT OVERALL OVERALL LOAD
Lbs Kg Lbs Kg Ft M Ft M Lbs Tons
CUB-10 100 45 55 25 1.3 0.4 2 0.6 5,000 2.3
CUB-20 200 90 65 29 1.5 0.5 2.5 0.8 5,000 2.3
CUB-30 300 136 90 41 1.7 0.5 2.7 0.8 5,000 2.3
CUB-50 500 227 130 59 2.0 0.6 2.0 0.6 7,500 3.4
CUB-100 1,000 454 200 91 2.4 0.7 4.0 1.2 10,000 4.5
CUB-150 1,500 680 240 109 2.7 0.8 5.0 1.5 10,000 4.5
CUB-200 2,000 907 440 200 3.1 0.9 5.2 1.6 20,000 9.1
CUB-250 2,500 1,134 600 272 3.5 1.1 5.5 1.7 20,000 9.1
CUB-300 3,000 1,361 800 363 4.0 1.2 6.0 1.8 20,000 9.1
CUB-400 4,000 1,814 970 440 4.5 1.4 6.2 1.9 40,000 18.0
CUB-500 5,000 2,268 1.320 599 4.7 1.5 6.2 1.9 40,000 18.0
CUB-600 6,000 2,722 1,740 789 5.0 1.6 6.6 2.0 40,000 18.0
Actual values for all sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.

• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0078-05 4/24/06 3:21 PM Page 1

76-06

MARINE FENDERS INTERNATIONAL


BUOYS
CONSTRUCTION FEATURES:
• Central steel strength member • Non-marking
• Heat-laminated, impact-absorbing, closed-cell, rigid urethane flotation foam • Puncture resistant
• Abrasion-resistant, filament nylon-reinforced urethane elastomer skin • Unsinkable
• Internal radar reflectors • Corrosion resistant

RECTANGULAR ANCHOR PENDANT BUOYS


BUOY BUOYANCY BUOY BUOY DIMENSIONS WORKING
MODEL NET WEIGHT LENGTH HEIGHT WIDTH OVERALL HEIGHT LOAD
Lbs Kg Lbs Kg Ft M Ft M Ft M Ft M Lbs Tons
RPB-10 2,200 1000 408 185 3.0 0.9 5.0 1.5 3.0 0.9 7.3 2.2 150,000 68
RPB-20 4,400 2000 817 371 3.6 1.1 5.0 1.5 5.0 1.5 7.3 2.2 150,000 68
RPB-40 8,800 4000 1,470 667 4.5 1.4 6.0 1.8 6.0 1.8 9.9 3.0 150,000 68
RPB-60 13,200 6000 3,060 1,388 5.0 1.5 7.0 2.1 8.5 2.6 10.9 3.3 150,000 68
RPB-80 17,600 8000 3,514 1,594 5.4 1.6 7.5 2.3 8.5 2.6 11.4 3.5 150,000 68
RPB-100 22,000 10000 4,312 1,956 6.0 1.8 9.0 2.7 8.1 2.5 12.6 3.8 150,000 68
RPB-120 26,400 12000 4,641 2,105 6.5 2.0 9.5 2.9 8.4 2.6 13.4 4.1 150,000 68
RPB-140 30,800 14000 5,835 2,647 6.5 2.0 10.5 3.2 9.0 2.7 14.8 4.5 200,000 91
OPTIONS: RPB-160 35,200 16000 6,442 2,922 6.5 2.0 10.5 3.2 10.5 3.2 14.6 4.5 200,000 91
• Mooring Tee RPB-180 39,600 18000 7,195 3,264 6.5 2.0 11.5 3.5 11.0 3.4 15.6 4.8 200,000 91
• Quick Release Hook RPB-200 44,000 20000 7,533 3,417 8.0 2.4 11.0 3.4 10.7 3.3 14.8 4.5 200,000 91
• Hawser Pipe RPB-250 55,000 25000 8,427 3,822 8.5 2.6 12.6 3.8 10.8 3.3 16.5 5.0 200,000 91
• Navigational Beacon RPB-300 66,000 30000 9,918 4,499 8.5 2.6 14.4 4.4 11.1 3.4 18.2 5.5 200,000 91
Actual values for above sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.

NAVIGATIONAL AND MARKER BUOYS


BUOY BUOYANCY BUOY BUOY BUOY BODY
MODEL NET WEIGHT DIAMETER HEIGHT
Lbs Kg Lbs Kg Ft M Ft M
NAV-100 221 100 194 88 3.0 0.9 2.3 0.7
NAV-200 441 200 399 181 3.8 1.2 3.0 0.9
NAV-500 1,103 500 650 295 4.9 1.5 3.0 0.9
NAV-750 1,654 750 981 445 6.7 2.0 3.3 1.0
NAV-1000 2,205 1,000 1,816 824 8.5 2.6 4.2 1.3
NAV-3000 6,615 3,000 3,112 1,412 10.0 3.0 4.5 1.4
NAV-5000 11,025 5,000 4,462 2,024 10.2 3.1 6.0 1.8 BEACON OPTIONS:
NAV-7500 16,538 7,500 6,703 3,040 11.8 3.6 6.6 2.0 • Solar Powered
NAV-10000 22,050 10,000 7,845 3,558 13.2 4.0 6.0 1.8 • Dry Cell Battery Powered
Actual values for above sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.

OCEANOGRAPHIC BUOYS
BUOY BUOYANCY FLOTATION TOTAL DIAMETER DIAMETER HEIGHT TOWER
MODEL NET WEIGHT WEIGHT OVERALL INTERNAL FLOTATION HEIGHT
Lbs Kg Lbs Kg Lbs Kg Ft M Ft M Ft M Ft M
OG-10 2,205 1,000 60 27 513 233 5.4 1.6 2.2 0.7 2.3 0.7 5.6 1.7
OG-15 3,307 1,500 72 33 606 275 6.1 1.9 2.3 0.7 2.4 0.7 5.6 1.7
OG-20 4,409 2,000 99 45 752 341 6.5 2.0 2.5 0.8 2.6 0.8 6.1 1.9
ATLAS-3 5,000 2,268 130 59 1,200 544 7.4 2.3 3.2 1.0 3.2 1.0 7.0 2.1
Actual values for above sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.

• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0080-03 4/24/06 3:24 PM Page 1

77-06

PNEUMATIC FENDERS

Size: 24" x 48" Size: 40" x 60"


Fed. Stock No. Fed. Stock No.
H2040-753-3983 H2040-753-3984

The pneumatic fenders have drum-like shapes and are built like tires. They have four plies
of high strength nylon tire cord coated with neoprene and each unit is molded into one piece. All
fenders have a ring at each end for the attachment of handling and securing lines. Swivels at both
ends permit the fenders to rotate freely. Each pneumatic fender has an automobile-tire type of
inflation fitting installed in one end.

The 40" x 60" pneumatic fender weighs 325 pounds. It is suitable for use on most freigh-
ters and on larger tanker ships.

The 24" x 48" pneumatic fender, which weighs 110 pounds, is designed primarily for use on
smaller vessels. It can also be used to supplement the larger fenders.

Little maintenance is required for pneumatic fenders. It is important that the pressure be
checked at least once a month. This can be done with a combination inflation gauge connected to
the low-pressure air system of the ship. Punctures can be repaired by vulcanizing or by using
plugs similar to those used for making repairs to tubeless-type automobile tires.

Two or more fenders are used on each side of a ship. When a ship is coming alongside
another ship or dock, the fenders are suspended vertically. The line at the lower end of each
fender is left loose. After the ship's lines are secured, this loose line is used to pull the fender to a
horizontal position. In severe weather additional fenders should be put in use. No special rigging
is required to handle these lightweight pneumatic fenders.

3901 NE 12th Avenue


Pompano Beach, FL 33064 H. S. WHITE CO., INC. Call Toll Free for a
Copy of Our Catalog!
Phone: (954) 785-6760 TOLL FREE: (800) 327-8575
Miami: (305) 940-2700 FAX: (954) 785-8247 www.marinesupplies.net
80 4/24/06 3:25 PM Page 1

78-06

URETHANE PRODUCTS CORP.

ANTI-TERRORIST SECURITY BARRIERS


These barriers are designed to prevent launches and
other small boats, potentially laden with explosives,
from getting near vessels in port. Interconnected by
their end fittings, these barriers may encircle a ship or
block an entrance to a wharf from smaller watercraft.
The barriers are transportable for temporary or
permanent deployment. Barriers being delivered by truck to place of deployment

Components & Construction Features


4 ft. diameter x 20 ft. long foam filled • Profile - 3 ft. above water line
heavy duty barrier fender
• Will not deflate if punctured
• Heat laminated closed cell • Low maintenance - no air pressure
energy absorbing foam core
to maintain
• Continuous filament nylon tire cord
reinforced urethane skin • Barrier fenders can rotate independently

• Heavy duty integral swivel end fittings • Fender end-pull safe working load 34 kips
internally connected with a stud link chain • Towable
• Standard color black • No maintenance urethane skin

9 ft. diameter resilient buoy


Barrier
• Heavy duty internal steel strength member Fender
• Closed cell rigid urethane flotation foam core
• Heat laminated closed cell
• Energy absorbing foam core
• Continuous filament nylon tire cord
reinforced urethane skin
• Standard color safety orange

Urethane Products Corporation Coast Marine & Industrial Oceans West Marine J.C. MacElroy, Inc. See our fenders in the
9076 Rosecrans Avenue Supply Inc. (COMAR) & Industrial Supply Inc. 91 Ethel Road West Advertising Section
Bellflower, CA 90706 398 Jefferson St. 2886 Main Street P.O. Box 850
Toll Free: (800) 913-0062 San Francisco, CA 94133 San Diego, CA 92113 Piscataway, NJ 08855-0850
Tel: (562) 630-4982 • Fax: (562) 630-6974 Toll Free: (800) 433-8050 Tel: (619) 544-1900 Tel: (732) 572-7100
E-mail: info@urethaneproducts.com Tel: (415) 673-1923 Fax: (619) 696-0646 Fax: (732) 572-7112
www.urethaneproducts.com Fax: (415) 673-1927 E-mail: owest1900@aol.com
81 4/24/06 3:26 PM Page 1

79-06

BRIDON

CHAIN THROUGH BUOYS LACE-ON HAWSER FLOATS


Chain Through Buoys are widely used in SPM systems for Net Buoyancy Approx.
No. of
Rope Size & Type Per Per Dry Dim. Y
security and in order to reduce tangling. These buoys are Pockets
Float Foot Weight
resistant to high impact shock loads and are virtually unsinkable.
4 No.’s 10-13 Single Leg 8.2 2.3 1.2 457 (+/- 6mm)
Manufactured with a central steel tube, to allow the chain to pass 5 No.’s 14-16 Single Leg 9.7 2.7 1.5 559 (+/- 6mm)
through, they are fitted with either locking plates or single/double
6 No.’s 17-19 Single Leg 11.8 3.2 1.6 655 (+/- 6mm)
locking pins to retain the chain. Auxiliary lifting eyes are fitted at
each end of the buoy to aid handling. The external steelwork is No.’s 20-22 Single Leg
7 13.8 3.6 1.9 752 (+/- 13mm)
bitumastic-coated for protection. No.’s 10-13 Grommet
8 No.’s 14-16 Grommet 15.9 4.3 2.0 848 (+/- 13mm)
Net Body O/A Body Tube 9 No.’s 17-19 Grommet 17.9 4.9 2.3 945 (+/- 13mm)
Buoy Weight
Buoyancy Length Length Dia. Size
Size kg 10 No.’s 20-22 Grommet 19.9 5.4 2.4 1041 (+/- 19mm)
lb m m m mm
CTB20 2000 569 1.68 2.13 1.14 330 11 No.’s 17-19 Grom. Splice 21.8 5.9 2.7 1138 (+/- 19mm)

CTB30 3000 612 1.68 2.13 1.30 330 12 No.’s 20-22 Grom. Splice 23.8 6.6 2.9 1234 (+/- 25mm)
CTB40 4000 675 1.90 2.36 1.37 330 Dimensions in millimeters; weights in kilograms
CTB50 5000 780 1.98 2.44 1.49 381
CTB60 6000 858 2.13 2.59 1.55 381
CTB80 8000 1165 2.91 3.35 1.56 432
CTB90 9000 1163 2.61 3.05 1.70 432
CTB100 10000 1397 2.61 3.05 1.82 483
CTB120 12000 1564 3.22 3.66 1.78 483

ROPE AND HOSE FLOATS


Model Length Rope Hole Buoyancy Weight

SF13 1070mm 120mm 15kg 2.0kg


SF15 1070mm 141mm 17kg 2.0kg
SF18 1070mm 171mm 24kg 3.0kg
SF21 1070mm 197mm 33kg 4.0kg

Please specify either tubular or lace-up design

Example shown is a 9-pocket float with foams installed, for issue on a


No. 18 grommet-type hawser.

Phone: +44 (0) 1323 444777 Fax: +44 (0) 1323 444744 Email: fibresales@bridon.com
www.bridon.com
82-05 4/24/06 3:27 PM Page 1

80-06

NEW OFFSHORE, INC.


VOLUME OF LOW PROFILE DRY BULK TANKS
IN CUBIC FEET

DIAMETER
12’ 12’-6” 13’ 13’-6” 14’ 14’-6” 15’ 15’-6” 16’ 16’-6” 17’ 17’-6” 18’ 18-6”

10’ 797 852 906 961 1018 1069 1123 1180 1235 1289 1342 1396 1442 1496

10’-6” 853 913 973 1032 1095 1151 1211 1274 1335 1396 1456 1516 1569 1631

11’ 910 975 1039 1104 1171 1234 1300 1368 1436 1503 1569 1636 1696 1765

11’-6” 966 1036 1105 1176 1248 1316 1388 1463 1536 1609 1683 1757 1824 1900

12’ 1023 1097 1172 1247 1325 1399 1476 1557 1637 1716 1796 1877 1951 2034

12’-6” 1079 1159 1238 1319 1402 1481 1565 1652 1737 1823 1910 1997 2078 2168

13’ 1136 1220 1304 1390 1479 1564 1653 1746 1838 1930 2023 2117 2205 2303

13’-6” 1192 1282 1371 1462 1556 1647 1741 1840 1938 2037 2137 2238 2333 2437

14’ 1249 1343 1437 1533 1633 1729 1830 1935 2039 2144 2250 2358 2460 2572

14’-6” 1306 1404 1503 1605 1710 1812 1918 2029 2139 2251 2364 2478 2587 2706

15’ 1362 1466 1570 1677 1787 1894 2006 2123 2240 2358 2477 2598 2714 2840

15’-6” 1419 1527 1636 1748 1864 1977 2095 2218 2340 2465 2591 2719 2842 2975

16’ 1475 1588 1703 1820 1941 2059 2183 2312 2441 2572 2704 2839 2969 3109
16’-6” 1532 1650 1769 1891 2018 2142 2272 2406 2541 2679 2818 2959 3096 3244
17’ 1588 1711 1835 1963 2095 2225 2360 2501 2642 2785 2931 3079 3223 3378
17’-6” 1645 1772 1902 2034 2172 2307 2448 2595 2743 2892 3045 3200 3351 3512
18’ 1701 1834 1968 2106 2249 2390 2537 2689 2843 2999 3158 3320 3478 3647
18’-6” 1758 1895 2034 2178 2326 2472 2625 2784 2944 3106 3272 3440 3605 3781

Contact: Bill New

NEW OFFSHORE, INC. 800-467-8670


P.O. Box 2176, Morgan City, LA 70381 PH: 985-385-6789
www.newindustries.com FAX: 985-385-6156
0071-04 4/24/06 3:28 PM Page 1

81-06

NEW OFFSHORE, INC.


VOLUME OF CONE BOTTOM DRY BULK TANKS
IN CUBIC FEET

DIAMETER

12’ 12’-6” 13’ 13’-6” 14’ 14’-6” 15’ 15’-6” 16’ 16’-6” 17’ 17’-6” 18’ 18’-6”

10’ 605 630 651 669 685 -- -- -- -- -- -- -- -- --

10’-6” 662 691 717 741 762 778 -- -- -- -- -- -- -- --

11’ 718 752 783 812 839 860 880 -- -- -- -- -- -- --

11’-6” 775 814 850 884 916 943 968 992 1012 -- -- -- -- --

12’ 831 875 916 955 993 1026 1057 1087 1112 1135 -- -- -- --

12’-6” 888 936 982 1027 1070 1108 1145 1181 1213 1242 1265 -- -- --

13’ 944 998 1049 1098 1147 1191 1233 1275 1314 1348 1379 1407 1428 --

13’-6” 1001 1059 1115 1170 1224 1273 1322 1370 1414 1455 1492 1527 1555 1584

14’ 1057 1121 1181 1242 1301 1356 1410 1464 1515 1562 1606 1648 1682 1718

14’-6” 1114 1182 1248 1313 1378 1438 1498 1558 1615 1669 1719 1768 1809 1852

15’ 1171 1243 1314 1385 1455 1521 1587 1653 1716 1776 1833 1888 1937 1987

15’-6” 1227 1305 1381 1456 1532 1603 1675 1747 1816 1883 1946 2008 2064 2121

16’ 1284 1366 1447 1528 1609 1686 1764 1841 1917 1990 2060 2129 2191 2256

16’-6” 1340 1427 1513 1599 1686 1769 1852 1936 2017 2097 2173 2249 2318 2390

17’ 1397 1489 1580 1671 1763 1851 1940 2030 2118 2204 2287 2369 2445 2524

17’-6” 1453 1550 1646 1743 1840 1934 2029 2124 2218 2311 2400 2489 2573 2659

18’ 1510 1611 1712 1814 1917 2016 2117 2219 2319 2418 2514 2610 2700 2793

18’-6” 1566 1673 1779 1886 1994 2099 2205 2313 2419 2524 2627 2730 2827 2928

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0084-04 4/24/06 3:29 PM Page 1

82-06

MODULAR BUMPERS HEAVY-DUTY

Part No. A B C* D Wt.


Units Inches Lbs.
E42000 10 7 3/4 36 100
E43000 10 7 3/4 48 133 Part No. C* D Wt.
E42010 10 7 1/2 36 77 Units Inches Lbs.
E43010 10 7 1/2 48 103 E42002 3/4 36 200
E42004 10 7 1/4 36 50 E43002 3/4 48 267 Part No. E* R Wt.
E43004 10 7 1/4 48 67 E42034 1/2 36 150 Units Inches Lbs.
E42005 13-1/2 10-1/4 3/4 36 138 E43034 1/2 48 200 E42012 3/4 18 100
E42041 13-1/2 10-1/4 1/2 36 110 E42035 1/4 36 100 E42049 1/2 18-1/4 70
E42042 13-1/2 10-1/4 1/4 36 75 E43035 1/4 48 133 E42050 1/4 18-1/2 43
*Steel is standard *Steel is standard *Steel is standard

WELD-ON BUMPERS
Part No. A B C D E Wt.
Units Inches Lbs.
E47950 6 3 4-1/4 2-1/4 1/4 34
E47951 6 3 4-1/4 2-1/2 1/2 54
E47952 6 3 4-1/4 2-3/4 3/4 73
E47960 8 5 6-1/4 2-1/4 1/4 50
Part No. A Wt.
E47961 8 5 6-1/4 2-1/2 1/2 75 Units Inches Lbs.
E47962 8 5 6-1/4 2-3/4 3/4 99 E44311 2 168
E47970 10 7 8-1/4 2-1/4 1/4 65 E44300 4 133
E47971 10 7 8-1/4 2-1/2 1/2 96
E47972 10 7 8-1/4 2-3/4 3/4 127

Values given on sketches do not allow for plate bending to radius

• Plates are formed to increase rigidity


• One section will cover approx. 75° on 36” radius

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0085-04 4/24/06 3:29 PM Page 1

83-06

EXTRUDED FENDERS

Cylindrical Square
Part No. O.D. I.D. Wt. /Ft. R/E Part No. A Bore Wt./Ft. R/E
Units Inches Inches Lbs. Kip/Ft. Kip Units Inches Inches Lbs. Kip/Ft. Kip
F3-0000 3 1.5 3 14 F6-0000 4.5 1.5 4.5 20
F3-8000 5 2.5 7 10 F6-2000 6 2 17 16
F3-9000 6 2 14 11 F5-6000 7 2.5 22.5 12.5
F3-1000 8 4 18.5 10 F5-0000 8 3 29.5 10
F3-2000 10 5 30 6.2 F5-7000 10 4 45 8.5
F3-5000 12 6 42.5 5.3 F5-1000 12 5 63 7
F3-6000 15 7.5 68.5 3.5 F5-2000 14 6 81 3.7
F3-3000 18 9 97.5 2.9 G6-2000 16 7 112 2.5

Cylindrical Wing
Part No. A Bore C D E Wt./Ft. R/E
Units Inches Lbs. Kip/Ft. Kip
F7-0000 3 1 6 .75 1.5 4.3 25
F7-8000 4 2 7.5 1.0 2.25 10 19.5 Slope Side “D” Shape
F7-1000 6 3 9 1.5 3 15.5 13.5 Part No. A B C D E F Wt./Ft. R/E
F8-1000 8 4 12 2.0 4 30 11 Units Inches Lbs. Kip/Ft. Kip
F8-4000 10 5 15 2.5 5 44 9 F9-4000 3.75 2.25 4.50 .75 2 1.50 4.5 16.7
F7-3000 12 6 18 3.0 6 58.5 6.3 F9-1000 6 3 6.75 1.25 2.87 2.37 12.3 13.3

“D” Shape – “D” Bore “D” Shape – “O” Bore


Part No. A B C D E Wt./Ft. R/E Part No. A B C D Wt./Ft. R/E
Units Inches Lbs. Kip/Ft. Kip Units Inches Lbs. Kip/Ft. Kip
G5-4000 6 3 5 2.5 3 11.5 15.2 F9-2000 6 2.5 5 3 11.5 15.2
F9- 0000 8 4 8 4 4 22 10 F9-5000 8 3 8 4 22 10
G0-7000 10 5 10 5 5 38 8.6 G0-5000 10 4 10 5 38 8.6
F9-7000 12 6 12 6 6 54 7.7 F9-3000 12 5 12 6 54 7.7
G0-6000 14 7 14 7 7 73 4.2 F9-8000 14 6 14 7 73 4.2

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
86 4/24/06 3:31 PM Page 1

84-06

LIFT-IT MFG. CO., INC.


ENDLESS SLINGS
A very versatile sling design as hook and load contact
points can be rotated. For use in choker, vertical and
basket hitches. The sling strands can be spread for
improved load control. Hook contact points can be
tapered and reinforced on request.

WORK LOAD LIMIT (LBS)

Choker Vertical Basket Hitches

Width Optional End Taper 90º 60º 45º Sling Weight (LBS) SLING LENGTH
Stock No.
(inches) Width Length Base 8 FT Adder / FT MINIMUM (FT)
1" EN1-601 - - 1,900 2,400 4,800 4,150 3,390 .56 .06 2
1" EN1-901 - - 2,500 3,200 6,400 5,540 4,520 .95 .11 2
1" EN2-601 - - 3,800 4,800 9,600 8,310 6,780 1.15 .13 2
1" EN2-901 - - 5,000 6,400 12,800 11,080 9,050 1.96 .22 2
1" EN3-901 - - 7,600 9,600 19,200 16,620 13,570 2.97 .33 3
1-1/2" EN1-915 - - 3,700 4,650 9,300 8,050 6,570 1.58 .09 2
1-1/2" EN2-915 - - 7,400 9,300 18,600 16,100 13,150 3.26 .18 2
1-1/2" EN3-915 - - 11,000 13,950 27,900 24,160 19,720 4.93 .55 3
2" EN1-602 1" 12" 3,800 4,800 9,600 8,310 6,780 1.36 .16 2
2" EN1-902 1" 12" 5,000 6,400 12,800 11,080 9,050 1.90 .22 2
2" EN2-602 1" 12" 7,600 9,600 19,200 16,620 13,570 2.80 .32 2
2" EN2-902 1" 12" 10,000 12,500 25,000 21,650 17,670 3.92 .44 2
2" EN3-902 - - 14,000 17,500 35,000 30,310 24,740 5.94 .67 3
2" EN4-902 - - 18,000 23,500 47,000 40,700 33,230 7.95 .89 4
3" EN1-603 1-1/2" 12" 5,700 7,200 14,400 12,470 10,180 2.38 .28 2
3" EN1-903 1-1/2" 12" 7,600 9,600 19,200 16,620 13,570 2.99 .35 2
3" EN2-603 1-1/2" 12" 10,000 12,500 25,000 21,650 17,670 4.90 .56 2
3" EN2-903 1-1/2" 12" 14,000 17,500 35,000 30,310 24,740 6.16 .70 2
3" EN3-903 - - 21,000 26,500 53,000 45,890 37,470 9.33 1.05 3
3" EN4-903 - - 28,000 35,000 70,000 60,620 49,490 12.50 1.40 4
4" EN1-604 1-1/2" 12" 7,600 9,600 19,200 16,620 13,570 2.92 .34 3
4" EN1-904 1-1/2" 12" 10,000 12,500 25,000 21,650 17,670 3.74 .44 3
4" EN2-604 2" 18" 14,000 17,500 35,000 30,310 24,740 6.02 .68 3
4" EN2-904 2" 18" 18,000 23,500 47,000 40,700 33,230 7.70 .88 3
4" EN3-904 - - 28,000 35,000 70,000 60,620 49,490 11.66 1.32 4
4" EN4-904 - - 36,000 46,000 92,000 79,670 65,040 15.62 1.76 4
5" EN1-905 1-3/4" 18" 12,800 16,000 32,000 27,710 22,620 4.56 .53 3
5" EN2-905 2-1/2" 18" 22,000 27,500 55,000 47,630 38,880 9.38 1.07 4
5" EN3-905 - - 33,500 42,000 84,000 72,740 59,380 14.20 1.60 5
5" EN4-905 - - 44,800 56,000 112,000 96,900 79,180 19.03 2.14 5
6" EN1-606 2" 18" 11,500 14,400 28,800 24,940 20,360 4.13 .48 3
6" EN1-906 2" 18" 15,300 19,200 38,400 33,250 27,140 5.51 .64 3
6" EN2-606 3" 24" 19,500 24,480 48,960 42,300 34,610 8.51 .97 3
6" EN2-906 3" 24" 26,000 32,500 65,000 56,290 45,950 11.34 1.29 3
6" EN3-906 - - 39,000 48,900 97,800 84,690 69,140 17.17 1.94 5
6" EN4-906 - - 52,000 65,000 130,000 112,580 91,910 23.00 2.59 5
8" EN1-908 3" 18" 20,000 25,600 51,200 44,330 36,190 7.62 .90 3
8" EN2-908 4" 24" 32,700 40,960 81,920 70,940 57,910 15.68 1.79 4
8" EN3-908 - - 49,000 61,000 122,000 105,650 86,250 23.74 2.69 5
8" EN4-908 - - 65,500 81,900 163,800 158,230 141,850 31.81 3.58 6
10" EN1-910 3-1/2" 24" 25,600 32,000 64,000 55,420 45,240 9.96 1.17 3
10" EN2-910 5" 30" 38,400 48,000 96,000 83,130 67,870 20.51 2.34 4
10" EN3-910 - - 57,600 72,000 144,000 124,700 101,800 31.06 3.52 5
10" EN4-910 - - 76,800 96,000 192,000 166,270 135,740 41.61 4.69 6
12" EN1-912 4" 30" 30,720 38,000 76,000 65,810 53,730 12.24 1.44 3
12" EN2-912 6" 36" 43,000 53,000 106,000 91,790 74,940 25.20 2.88 5
12" EN3-912 - - 64,000 80,000 160,000 138,560 113,120 38.16 4.32 6
12" EN4-912 - - 86,000 107,000 214,000 185,324 151,298 51.12 5.76 8

• Available in either nylon or polyester webbing.


• For polyester webbing add the letters “PME” to the Stock No. (Example: EN2-904PME).
• Polyester webbing is available in the (9) heavy web class only. DO NOT EXCEED WORK LOAD LIMITS
• User must specify sling length.

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
87 4/24/06 3:33 PM Page 1

85-06

LIFT-IT MFG. CO., INC.


EYE AND EYE SLINGS
A versatile sling for use in choker, vertical and basket hitches. Flat Eye Slings (Type III) are
easier to remove from under the load after it is in place, when compared to half twist eyes.
The load should never be placed or left resting on the sling. Type III eyes are furnished unless
HT (Type IV) eyes are specified. EE (Flat) TYPE III EE (Flat) & Tapered
The Half Twist (Type IV) Eye is recommended when slings are to be used in a choker hitch.
The half twist eye performs equally as well in vertical or basket hitches. For Half Twist Eyes
specify ‘HT’ after the Stock Number. (Example: EE1-903 HT)
Tapered eyes are furnished on slings over 2" wide to provide for a proper relationship between EE (Half Twist) TYPE IV EE (Half Twist) & Tapered
the sling and the lifting hook. Untapered eyes
are available on request.
WORK LOAD LIMIT (LBS)

Choker Vertical Basket Hitches

90º 60º 45º


Width Eye Dimensions (in.) Sling Weight (LBS) Sling Length
Stock No.
(inches) Min. (FT)
Width Length Base 8 FT Adder / FT
1" EE1-601 1" 9" 900 1,200 2,400 2,070 1,690 .40 .033 3
1" EE1-901 1" 9" 1,200 1,600 3,200 2,770 2,260 .67 .056 3
1" EE2-601 1" 9" 1,900 2,400 4,800 4,150 3,390 .59 .066 3
1" EE2-901 1" 9" 2,500 3,200 6,400 5,540 4,520 1.00 .112 3
1" EE4-601 1" 12" 3,800 4,800 9,600 8,310 6,780 1.22 .132 4
1" EE4-901 1" 12" 5,000 6,400 12,800 11,080 9,050 2.07 .220 4
1-1/2" EE1-915 1-1/2" 9" 1,800 2,300 4,600 3,980 3,250 1.11 .093 3
1-1/2" EE2-915 1-1/2" 9" 3,600 4,600 9,200 7,960 6,500 1.67 .186 3
1-1/2" EE4-915 1-1/2" 12" 7,200 9,200 18,400 15,930 13,000 3.44 .372 4
2" EE1-602 2" 9" 1,900 2,400 4,800 4,150 3,390 .96 .080 4
2" EE1-902 2" 9" 2,500 3,200 6,400 5,540 4,520 1.34 .112 4
2" EE2-602 2" 9" 3,800 4,800 9,600 8,310 6,780 1.44 .160 3
2" EE2-902 2" 9" 5,000 6,400 12,800 11,080 9,050 2.02 .220 3
2" EE4-602 2" 12" 7,000 8,860 17,720 15,340 12,530 2.96 .320 4
2" EE4-902 2" 12" 9,000 11,400 22,800 19,740 16,120 4.14 .440 4
3" EE1-603 1-1/2" 12" 2,700 3,600 7,200 6,230 5,090 1.82 .140 4
3" EE1-903 1-1/2" 12" 3,800 4,800 9,600 8,310 6,780 2.29 .180 4
3" EE2-603 1-1/2" 12" 5,300 6,600 13,200 11,430 9,330 2.52 .280 4
3" EE2-903 1-1/2" 12" 7,000 8,860 17,720 15,340 12,530 3.24 .350 4
3" EE4-603 1-1/2" 18" 9,000 11,400 22,800 19,740 16,120 5.18 .560 5
3" EE4-903 1-1/2" 18" 13,000 17,000 34,000 29,440 24,040 6.60 .700 5
4" EE1-604 1-1/2" 12" 3,800 4,800 9,600 8,310 6,780 2.24 .172 4
4" EE1-904 1-1/2" 12" 5,000 6,400 12,800 11,080 9,050 2.86 .220 4
4" EE2-604 1-1/2" 12" 7,000 8,860 17,720 15,340 12,530 3.10 .340 4
4" EE2-904 1-1/2" 12" 9,000 11,400 22,800 19,740 16,120 3.96 .440 4
4" EE4-604 2" 18" 12,000 15,000 30,000 25,980 21,210 6.54 .690 5
4" EE4-904 2" 18" 18,000 22,800 45,600 39,480 32,240 8.36 .880 5
5" EE1-905 1-3/4" 12" 6,000 8,000 16,000 13,850 11,310 3.48 .268 5
5" EE2-905 1-3/4" 12" 11,400 14,250 28,500 24,680 20,150 4.82 .540 5
5" EE4-905 2-1/2" 18" 19,000 24,000 48,000 41,560 33,940 10.18 1.070 6
6" EE1-606 2" 16" 5,700 7,200 14,400 12,470 10,180 3.16 .243 5
6" EE1-906 2" 16" 7,600 9,600 19,200 16,620 13,570 4.21 .324 5
6" EE2-606 2" 16" 9,700 12,240 24,480 21,200 17,310 4.37 .490 5
6" EE2-906 2" 16" 13,000 17,000 34,000 29,440 24,040 5.83 .650 5
6" EE4-606 3" 18" 18,000 22,800 45,600 39,490 32,240 9.23 .970 6
6" EE4-906 3" 18" 24,000 30,000 60,000 51,960 42,420 12.31 1.300 6
8" EE1-908 3" 18" 10,250 12,800 25,600 22,170 18,100 6.27 .448 6
8" EE2-908 3" 18" 18,000 22,800 45,600 39,490 32,240 8.51 .900 6
8" EE4-908 4" 24" 32,000 40,000 80,000 69,280 56,560 17.47 1.790 8
10" EE1-910 3-1/2" 24" 12,000 15,000 30,000 25,980 21,210 8.20 .586 8
10" EE2-910 3-1/2" 24" 19,000 24,000 48,000 41,560 33,940 11.13 1.170 8
10" EE4-910 5" 30" 36,000 45,000 90,000 77,940 63,630 22.85 2.340 10
12" EE1-912 4" 30" 15,000 19,000 38,000 32,910 26,860 10.08 .720 10
12" EE2-912 4" 30" 24,000 30,000 60,000 51,960 42,420 13.68 1.440 10
12" EE4-912 6" 36" 43,000 53,000 106,000 91,790 74,940 28.80 2.880 12

• Available in either nylon or polyester webbing.


• For polyester webbing add the letters “PME” to the Stock No. (Example: EE4-904PME). DO NOT EXCEED WORK LOAD LIMITS
• Polyester webbing is available in the (9) heavy web class only.
• User must specify sling length.

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
88 4/24/06 3:34 PM Page 1

86-06

LIFT-IT MFG. CO., INC.


WORK LOAD LIMIT (LBS)
Reversed Eye Slings Choker Vertical Basket Hitches

Eye Dimensions (in.) 90° 60° 45° Sling Weight (lbs.) Sling
RE (Standard) – Type VI Width Stock
Length
(inches) No. Width Length Base 8 FT Adder/FT Min. (FT)
2” **1-601 1” 9” 1,900 2,400 4,800 4,150 3,390 1.40 .16 3
2” **1-901 1” 9” 2,500 3,200 6,400 5,540 4,520 1.79 .21 3
REF (Flat) – Type VII 2” **2-601 1” 12” 3,800 4,800 9,600 8,310 6,780 1.99 .23 4
2” **2-901 1” 12” 5,000 6,400 12,800 11,080 9,050 2.80 .32 4
3” **1-915 1-1/2” 12” 3,700 4,650 9,300 8,050 6,570 2.90 .23 4
3” **2-915 1-1/2” 12” 7,400 9,300 18,600 16,100 13,150 4.58 .32 4
Protective Cordura® wear pads cover both sides of 3-1/2” **1-675 1-3/4” 12” 3,200 4,000 8,000 6,930 5,650 2.80 .32 4
the sling body and eyes. The Reversed Eye (RE- 3-1/2” **2-675 1-3/4” 12” 6,000 7,500 15,000 12,990 10,600 4.24 .48 4
Standard-Type VI) has eyes that are 90° to the sling 4” **1-602 1” 12” 3,800 4,800 9,600 8,310 6,780 2.68 .34 4
4” **1-902 1” 12” 5,000 6,400 12,800 11,080 9,050 3.22 .40 4
body; this eye type results in comparatively
4” **2-602 2” 12” 7,600 9,600 19,200 16,630 13,574 4.48 .50 4
advantageous choke hitches, when compared to 4” **2-902 2” 18” 9,000 11,400 22,800 19,740 16,120 5.60 .62 6
the flat (Type VII) eye. 4” **3-902 2” 18” 13,000 17,000 34,000 29,440 24,040 7.62 .85 6
The “REF” (Flat Type VII) body is turned 180°, 4” **4-902 2” 18” 17,000 21,500 43,000 37,240 30,400 9.63 1.07 6
6” **1-603 1-1/2” 12” 5,700 7,200 14,400 12,470 10,180 4.54 .56 5
forming an eye, which is in the same plane as the
6” **1-903 1-1/2” 12” 7,600 9,600 19,200 16,630 13,570 5.15 .63 5
sling body. The flat eye design permits easier 6” **2-603 1-1/2” 18” 9,000 11,400 22,800 19,740 16,120 7.06 .84 6
removal of the sling from under the load, once it 6” **2-903 1-1/2” 18” 13,000 17,000 34,000 29,440 24,040 8.32 .98 6
has been set. The load should be blocked up and 6” **3-603 3” 24” 16,000 20,000 40,000 34,640 28,280 10.40 1.12 8
never rested on the sling. 6” **3-903 3” 24” 20,000 25,000 50,000 43,300 35,300 12.31 1.33 8
6” **4-903 3” 28” 27,000 34,000 68,000 58,890 48,080 15.48 1.68 11
Both Type VI and Type VII Reversed Eye Slings can
be used in choker, vertical or basket hitches. **Use “RE” prefix for Standard Type VI; Use “REF” prefix for Flat Type VII
WORK LOAD LIMIT (LBS)
Basket Hitches

Wide Body Cargo Slings Width Stock Eye Dimensions (in.) 90° 60° 45° Sling Weight (lbs.) Sling
Length
(inches) No. Width Length Base 8 FT Adder/FT Min. (FT)
6” WBC2-603 1-1/2” 12” 14,000 12,120 9,900 3.40 .37 4
6” WBC2-903 1-1/2” 12” 19,000 16,450 13,430 4.12 .44 4
6” WBC4-603 1-1/2” 15” 26,000 22,510 18,380 6.06 .65 5
Wide Body Cargo slings are designed for use in 6” WBC4-903 1-1/2” 15” 35,000 30,310 24,740 7.54 .79 5
stabilizing loads over a wide surface area. The load 8” WBC2-604 1-1/2” 12” 19,000 16,450 13,430 4.16 .43 4
is distributed and delicate, soft surfaces are 8” WBC2-904 1-1/2” 12” 25,000 21,650 17,680 5.02 .53 4
8” WBC4-604 2” 15” 34,500 29,870 24,390 7.60 .78 5
protected.
8” WBC4-904 2” 15” 46,000 39,830 32,520 9.42 .97 5
Warning: For use in a basket hitch configuration only. 10” WBC2-905 1-3/4” 15” 31,000 26,840 21,920 6.45 .69 5
10” WBC4-905 2-1/2” 18” 57,000 49,360 40,300 11.81 1.22 6
• Available in either nylon or polyester webbing. 12” WBC2-606 2” 16” 26,000 22,510 18,380 6.00 .64 6
• For Polyester webbing add the letter “P” to 12” WBC2-906 2” 16” 37,000 32,040 26,160 7.46 .80 6
12” WBC4-606 3” 20” 49,000 42,430 34,640 10.86 1.14 7
the Stock Number. 12” WBC4-906 3” 20” 68,000 58,880 48,070 13.94 1.45 7
(Example: WBC2-906P) 16” WBC2-908 3” 20” 50,000 43,300 35,350 10.75 1.06 7
• Polyester webbing is available in the (9) heavy 16” WBC4-908 4” 24” 85,000 73,610 60,100 19.71 1.95 8
web class only. 20” WBC2-910 3-1/2” 24” 57,000 49,362 40,299 14.90 1.34 8
20” WBC4-910 5” 30” 96,000 83,130 67,870 26.46 2.41 10
24” WBC2-912 4” 30” 60,000 51,960 42,420 17.74 1.61 10
DO NOT EXCEED 24” WBC4-912 6” 36” 107,000 92,660 75,650 32.72 3.05 12
WORK LOAD LIMITS

Sling
Attached Eye Cargo Slings Width Stock Eye Dimensions (in.) 90° 60° 45° Sling Weight (lbs.)
Length
(inches) No. Width Length Base 8 FT Adder/FT Min. (FT)
6” AEC-606 1” 9” 3,000 2,590 2,120 3.22 .36 4
6” AEC-906 1” 9” 6,000 5,190 4,240 3.61 .36 4
8” AEC-608 1” 12” 3,000 2,590 2,120 4.09 .49 4
8” AEC-908 1” 12” 6,000 5,190 4,240 4.54 .49 4
The Attached Eye Cargo sling provides the same 10” AEC-610 1” 15” 3,000 2,590 2,120 5.10 .66 5
load control advantages as the Wide Body Cargo 10” AEC-910 1” 15” 6,000 5,190 4,240 5.61 .66 5
model. The special eye construction allows the 12” AEC-612 1” 15” 3,000 2,590 2,120 5.84 .80 5
sling to be used with small hoist hooks. The com- 12” AEC-912 1” 15” 6,000 5,190 4,240 6.35 .80 5
bination of small eye widths and large sling widths 16” AEC-916 2” 18” 10,000 8,660 7,070 9.41 1.06 6
provide for the efficient handling of light loads. 20” AEC-920 2” 24” 10,000 8,660 7,070 11.84 1.34 8
24” AEC-924 2” 24” 10,000 8,660 7,070 13.37 1.61 8
Warning: For use in basket hitch configuration only. 30” AEC-930 2” 30” 10,000 8,660 7,070 17.15 1.92 10
36” AEC-936 2” 30” 10,000 8,660 7,070 19.82 2.33 12

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
Lift-It 89 4/24/06 3:35 PM Page 1

87-06

LIFT-IT MFG. CO., INC.


HIGH PERFORMANCE FIBER TWIN-PATH® SLINGS
Twin-Path Extra slings can be used in place of wire rope slings for heavy lifts, while weighing
only 10 to 15% of a comparable steel sling. The sling’s design provides two, independent
connections between the hook and the load for back-up protection.
Stretch at work load limit is approximately 1%.
Twin-Path Extra slings are constructed of K-Spec®, a high performance fiber, consisting of
Aramid and HMPE (High Molecular Polyethylene) components.
A green outer protective cover (standard on all slings with 40,000 lbs. or greater vertical work load)
is made of abrasion resistant, bulked nylon. The inner cover is polyester, of a contrasting color.
Twin-Path slings have tattle tails that shrink as the sling is overloaded. Tattle tails are not a load
measuring device and if one or both of the tattle tails is not visible, do not use the sling.
Upon request, the slings can be provided with a Fiber Optic Inspection System. The Fiber Optic Inspection cable reflects light if the internal
yarns have not been crushed or chemically degraded.
Slings can also be provided with a Checkfast™ Inspection System. The two components of the system are the External Warning Indicator (EWI)
and the Checkfast Ribbon. After a thorough, hand over hand and visual inspection, check to ensure that the EWI is present and the ribbon does not
pull out easily from under the tag patch. If the EWI is not visible and the ribbon pulls out, revealing the broken sacrificial ring, do not use the sling.

Twin-Path Extra Specifications


WORK LOAD LIMIT (LBS.)
(5 TO 1 DESIGN FACTOR)
Choker Vertical Basket Hitches Approximate
Polyester Cover Covermax Cover Approximate
90° 60° 45° Weight
Body Width
Twin-Path Extra Twin-Path Extra (Lbs. per Ft.)
(Inches)
Stock No. Stock No. (Bearing-Bearing)

TPXKS1000 TUFXKS1000 8,000 10,000 20,000 17,320 14,140 .31 3"


TPXKS1500 TUFXKS1500 12,000 15,000 30,000 25,980 21,210 .40 3"
TPXKS2000 TUFXKS2000 16,000 20,000 40,000 34,640 28,280 .55 3"
TPXKS2500 TUFXKS2500 20,000 25,000 50,000 43,300 35,350 .65 4"
TPXKS3000 TUFXKS3000 24,000 30,000 60,000 51,960 42,420 .80 4"
TPXKS4000 TUFXKS4000 32,000 40,000 80,000 69,280 56,560 1.12 5"
— TUFXKS5000 40,000 50,000 100,000 86,139 70,700 1.50 5"
— TUFXKS6000 48,000 60,000 120,000 103,920 84,840 1.60 5"
— TUFXKS7000 56,000 70,000 140,000 121,240 98,980 1.66 6"
— TUFXKS8500 68,000 85,000 170,000 147,220 120,190 1.85 6"
— TUFXKS10000 80,000 100,000 200,000 173,200 141,400 2.20 6"
— TUFXKS12500 100,000 125,000 250,000 216,500 176,750 3.00 8"
— TUFXKS15000 120,000 150,000 300,000 259,800 212,100 3.36 8"
— TUFXKS17500 140,000 175,000 350,000 303,100 247,450 4.00 10"
— TUFXKS20000 160,000 200,000 400,000 346,400 282,800 4.37 10"
— TUFXKS25000 200,000 250,000 500,000 433,000 353,500 5.50 11"
— TUFXKS27500 220,000 275,000 550,000 476,300 388,850 6.90 11"
— TUFXKS30000 240,000 300,000 600,000 519,600 424,200 7.50 13"
— TUFXKS40000 320,000 400,000 800,000 689,112 565,600 8.60 14"
— TUFXKS50000 400,000 500,000 1,000,000 861,390 707,000 11.00 16"
Please Note: Work load limits include both paths for one complete sling, and are based on a straight pin diameter one-half the sling width.

DO NOT EXCEED WORK LOAD LIMITS

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
Lift-It 90 4/24/06 3:36 PM Page 1

88-06

LIFT-IT MFG. CO., INC.

BASKET CHOKER
HARDWARE SLINGS HARDWARE SLINGS
Basket hardware slings feature fittings of forged aluminum (ABH) or alloy steel Forged aluminum (ACH) and alloy steel (SCH) fittings provide for the most efficient
(SBH). choke hitching of any sling design, particularly in the use of wider webbing slings.
WARNING! Aluminum fittings should never be used where exposure to sprays, mists, vapors, fumes or liquids of acids, alkalis or other corrosive agents are present. Aluminum
fittings are non-sparking and do not rust, but are not as durable as steel hardware. Aluminum fittings are degraded by salt water. Steel fittings are automatically supplied on two
and four ply thickness slings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use. DO NOT EXCEED WORK LOAD LIMITS.

Work Load Limits (Lbs.) Work Load Limits (Lbs.)


Vertical Basket Sling Weight (Lbs.) Choker Vertical Basket Sling Weight (Lbs.)
Width Stock Min. Width Stock Min.
90° 90°
(inches) No. Base 8 Ft. Adder/Ft.
Lgth. (inches) No. Base 8 Ft. Adder/Ft. Lgth.

2" ABH1-602 2,400 4,800 2.04 .080 3 2" ACH1-602 1,900 2,400 4,800 2.44 .080 3

ALUMINUM
2" ABH1-902 3,200 6,400 2.26 .112 3 2" ACH1-902 2,500 3,200 6,400 2.66 .112 3
3" ABH1-603 3,600 7,200 3.50 .140 3 3" ACH1-603 2,700 3,600 7,200 4.00 .140 3
3" ABH1-903 4,800 9,600 4.05 .180 3 3" ACH1-903 3,800 4,800 9,600 4.55 .180 3
4" ABH1-604 4,800 9,600 4.78 .172 3 4" ACH1-604 3,800 4,800 9,600 5.48 .172 4
4" ABH1-904 6,400 12,800 5.50 .220 3 4" ACH1-904 5,000 6,400 12,800 6.20 .220 4
6" ABH1-606 7,200 14,400 8.76 .243 4 6" ACH1-606 5,700 7,200 14,400 10.91 .243 5
6" ABH1-906 9,600 19,200 9.85 .324 4 6" ACH1-906 7,600 9,600 19,200 12.00 .324 5
2" SBH1-602 2,400 4,800 3.40 .080 3 2" SCH1-602 1,900 2,400 4,800 4.20 .080 3
2" SBH1-902 3,200 6,400 3.62 .112 3 2" SCH1-902 2,500 3,200 6,400 4.42 .112 3
2" SBH2-602 4,800 9,600 3.76 .160 3 2" SCH2-602 3,800 4,800 9,600 4.56 .160 3
2" SBH2-902 6,400 12,800 4.46 .220 3 2" SCH2-902 5,000 6,400 12,800 5.26 .220 3
2" SBH4-602 8,860 17,720 6.60 .320 3 2" SCH4-602 7,000 8,860 17,720 8.10 .320 4
2" SBH4-902 11,400 22,800 8.26 .440 3 2" SCH4-902 9,000 11,400 22,800 9.76 .440 4
3" SBH1-603 3,600 7,200 5.30 .140 3 3" SCH1-603 2,700 3,600 7,200 6.60 .140 3
3" SBH1-903 4,800 9,600 5.85 .180 3 3" SCH1-903 3,800 4,800 9,600 7.15 .180 3
3" SBH2-603 6,600 13,200 6.29 .280 3 3" SCH2-603 5,300 6,600 13,200 7.59 .280 3
3" SBH2-903 8,600 17,720 7.14 .350 3 3" SCH2-903 6,900 8,600 17,720 8.44 .350 3
3" SBH4-603 11,400 22,800 11.92 .560 4 3" SCH4-603 9,000 11,400 22,800 14.92 .560 4
3" SBH4-903 17,000 34,000 13.36 .700 4 3" SCH4-903 13,000 17,000 34,000 16.36 .700 4
4" SBH1-604 4,800 9,600 7.38 .170 3 4" SCH1-604 3,800 4,800 9,600 9.38 .170 4
4" SBH1-904 6,400 12,800 8.10 .220 3 4" SCH1-904 5,000 6,400 12,800 10.10 .220 4
4" SBH2-604 8,860 17,720 8.46 .340 3 4" SCH2-604 7,000 8,860 17,720 10.46 .340 3
STEEL

4" SBH2-904 11,400 22,800 9.64 .440 3 4" SCH2-904 9,000 11,400 22,800 11.64 .440 3
4" SBH4-604 15,000 30,000 15.20 .690 4 4" SCH4-604 12,000 15,000 30,000 19.20 .690 5
4" SBH4-904 22,800 45,600 17.18 .880 4 4" SCH4-904 18,000 22,800 45,600 21.18 .880 5
5" SBH1-905 8,000 16,000 10.43 .268 4 5" SCH1-905 6,000 8,000 16,000 13.23 .268 5
5" SBH2-905 14,250 28,500 12.30 .540 3 5" SCH2-905 11,400 14,250 28,500 15.10 .540 4
6" SBH1-606 7,200 14,400 11.74 .243 4 6" SCH1-606 5,700 7,200 14,400 15.14 .243 5
6" SBH1-906 9,600 19,200 12.75 .324 4 6" SCH1-906 7,600 9,600 19,200 16.15 .324 5
6" SBH2-606 12,240 24,480 12.98 .490 3 6" SCH2-606 9,700 12,240 24,480 16.38 .490 4
6" SBH2-906 16,800 33,600 14.40 .650 3 6" SCH2-906 13,400 16,800 33,600 17.80 .650 4
6" SBH4-606 22,800 45,600 31.62 .970 4 6" SCH4-606 18,000 22,800 45,600 38.62 .970 6
6" SBH4-906 34,000 68,000 33.66 1.300 4 6" SCH4-906 27,000 34,000 68,000 40.66 1.300 6
8" SBH1-908 12,800 25,600 31.11 .448 4 8" SCH1-908 10,250 12,800 25,600 46.86 .448 5
8" SBH2-908 22,400 44,800 33.51 .900 4 8" SCH2-908 17,900 22,400 44,800 49.26 .900 4
8" SBH4-908 40,000 80,000 51.68 1.790 5 8" SCH4-908 32,000 40,000 80,000 67.68 1.790 7
10" SBH1-910 15,000 30,000 39.71 .586 5 10" SCH1-910 12,000 15,000 30,000 53.61 .586 5
10" SBH2-910 24,000 48,000 42.06 1.170 4 10" SCH2-910 19,000 24,000 48,000 55.96 1.170 5
12" SBH1-912 19,000 38,000 45.64 .720 5 12" SCH1-912 15,000 19,000 38,000 66.44 .720 6
12" SBH2-912 30,000 60,000 48.64 1.440 5 12" SCH2-912 24,000 30,000 60,000 69.44 1.440 5
■ Available in either nylon or polyester webbing ■ For Polyester Monster Edge® webbing add the letters PME to the stock number. (Example: SCH2-904PME)
■ Polyester webbing is available in the (9) heavy web class only ■ USER MUST SPECIFY SLING LENGTH

TRIANGLES Dimensions & Data CHOKERS Dimensions & Data


Approx. Approx.
Size * A B C D E F G Wt. (Lbs.) Size * A B C D E F G Wt. (Lbs.)
AT2 4 3-5/8 2-1/4 1-3/4 15/16 2-3/8 9/16 .32 AC2 6-1/8 5-1/4 2-1/8 1-3/4 15/16 2-3/8 9/16 .75
AT3 5-1/4 5 3-1/4 2 1-3/16 3-5/16 5/8 .75 AC3 7-1/2 7-1/8 3-1/8 2 1-1/8 3-5/16 5/8 1.20
AT4 6-1/4 6-5/8 4-3/8 2-3/8 1-7/16 4 11/16 1.20 AC4 8-3/4 8-3/4 4-1/8 2-3/8 1-7/16 4 11/16 1.80
AT6 8-5/16 8-7/8 6-3/8 3-1/8 1-3/4 5-1/2 15/16 2.50 AC6 11-5/16 11-3/4 6-1/8 3-1/8 1-3/4 5-1/2 15/16 5.10
ST2 4-1/8 4-1/8 2-1/4 1-3/4 15/16 2-7/16 1/2 1.0 SC2 6-3/16 5-1/4 2-1/16 2 13/16 2-3/8 1/2 1.8
ST3 5-5/16 5-1/8 3-1/32 2 1-3/16 3-3/8 1/2 1.6 SC3 7-3/4 7 3-1/16 2 1-1/8 3-3/8 1/2 2.9
ST4 6-1/2 6-3/4 4-1/2 2 1-5/8 4-1/16 1/2 2.4 SC4 8-15/16 8-7/8 4-1/8 2-1/2 1-7/16 4-1/8 1/2 4.4
ST5 7-7/16 8-1/16 5-9/16 2-1/2 1-15/32 5-1/32 1/2 3.2 SC5 10-1/8 10-7/16 5-1/8 2-3/4 1-5/8 4-11/16 1/2 6.0
ST6 8-9/16 8-5/8 6-1/4 2-3/4 1-11/16 5-3/4 1/2 4.2 SC6 11-1/2 11-15/16 6-1/8 2-7/8 1-3/4 5-7/16 1/2 7.6
ST8 10-7/8 11 8-1/8 3-5/8 1-13/16 7-1/2 3/4 6.4 SC8 14-1/8 15-3/4 8-1/8 5 2-3/8 7-1/4 3/4 15.0
ST10 12-7/8 13-3/8 10-1/4 4-7/8 2-11/16 8-11/16 3/4 13.9 SC10 17 17-3/4 10-1/8 5-1/8 3-1/2 8-3/8 3/4 27.8
ST12 13-3/4 16 12-1/4 5-1/8 3-5/8 8-3/8 3/4 18.2 SC12 19-3/8 22-13/16 12-1/8 5-1/2 4-1/4 9-15/16 3/4 39.0
* “AT” prefix indicates Aluminum Triangles, “ST” prefix indicates Steel Triangles * “AC” prefix indicates Aluminum Chokers, “SC” prefix indicates Steel Chokers

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
91 4/24/06 3:40 PM Page 1

89-06

LIFT-IT MFG. CO., INC.


CHAFFING GEAR
Chaffing gear protects expensive mooring and tow lines from cutting and abrasion. Easy to install and remove,
chaffing gear works equally as well with chain and wire rope assemblies, protecting the load and the sling.
Available in three materials: Nylon Webbing, Cordura® or 3/8 in. Felt. The standard material is nylon webbing with an
approximate 3/16" thickness. Bulked nylon material, also known as Cordura, is five times more abrasion resistant
than webbing, and is 3/32" thick. High density felt provides a “cushion” effect, when desired. Material selection
should be based upon the application, abrasion resistance or additional chaffing gear thickness.
Chaffing gear is available in any width and length. It may be ordered as a single, long length for on-site cutting and
installation of desired lengths, as required.
Alternating Type “A” Brass Grommets Type “B” Hook & Loop Tape
You must specify:
1. Design: Type “A” or “Type “B”
2. Material: Web, Cordura® or Felt
3. Size: Overall width & length
Allow extra width to compensate for line swelling.
Please consider the effective width for type “B” chaffing gear.
Type “B” Specifications
Overall Pad Width Hook & Loop Width Effective Pad Width Rope Diameter Rope Circumference
(inches) (inches) (inches) (inches) (inches)
8 1 7 1-1/2 to 1-3/4 4-3/4 to 5-1/2
10 2 8 2 6-1/4
12 2 10 2-1/2 to 2-3/4 7-3/4 to 8-5/8
14 2 12 3 to 3-1/2 9-1/2 to 11
16 2 14 4 12-1/2

RADOME SLINGS CARGO NET GAS CYLINDER SLING

Radome slings are fabricated from ■ Constructed of flexible nylon webbing ■ Made from nylon webbing straps 1/8" thick
heavy duty nylon or polyester webbing ■ Meets Dept. of Defense specification ■ Gas cylinder slings have a rated capacity
that is specifically made for lifting MIL-S-18313G of 1,000 lbs.
applications. Alloy masterlinks with ■ Anti-static finish ■ The base of the cylinder rests securely in
subassemblies provide for an efficient ■ 4500 lb. capacity a leatherlined nylon pocket while a loop
relationship between the assembly ■ SIZES: around the bottle neck holds it tight
legs and the lifting mechanism. Proof 4' x 4' ■ CG-10A for model T, K, and S cylinders
testing is available on request, and 6' x 6' Order Code Description Dimensions
specifications can be modified to meet 8' x 8' CG 10A Single Oxygen 9" to 20" diameter
customer’s requirements. 10' x 10'
Double Oxygen/ 9" dia. x 50" Oxygen
12' x 12' CG 20A
To order: Specify the SEA TEL 16' x 16'
Acetylene 13" dia. x 39" Acetylene
radome model number. 20’ x 20’ CG 30A Single Ammonia 13" to 16" diameter

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
3043 4/24/06 3:41 PM Page 642

90-06

LIFT-IT MFG. CO., INC.


ADJUSTABLE ROPE SLINGS
Loads are handled easily and efficiently by adjustable rope slings. These
slings replace a variety of differential length, “non-adjustable” slings and
accommodate a variety of different sized loads with infinite adjustability.

The slings are available in single-, double- and four-leg configurations,


standard models feature Yalex, a single braid, twelve-strand, high tenacity
polyester rope, finished with a coating of Maxijacket to optimize the service
life of the rope.

Higher work load limits are available with Vectrus rope. Vectrus is a single
braid, high performance fiber rope, constructed of Liquid Crystal Polymer
(LCP). Super strong and ultra light, adjustable rope slings fabricated from
Vectrus are coated with Maxijacket to enhance abrasion resistance.

Adjustable rope slings feature wear protection sleeves in the lift and load
connection points. Hooks and other load connection devices can also be
attached, by special request.

Adjustable rope slings are labeled with the information currently required
by the various regulatory agencies. Custom lengths may be specified.

SPECIFICATIONS
SINGLE-LEG ADJUSTABLE ROPE SLINGS
ROPE STOCK YALEX W.L.L (LBS.) ADJ. STOCK VECTRUS W.L.L. (LBS.) ADJ.
DIA. NUMBER CHOKER VERTICAL BASKET RANGE NUMBER CHOKER VERTICAL BASKET RANGE
3/8” Y-S-382048 800 1,000 2,000 20 - 48” V-S-383460 2,800 3,500 7,000 34 - 60”
1/2” Y-S-122860 1,600 2,000 4,000 28 - 60” V-S-124372 4,400 5,500 11,000 43 - 72”
5/8” Y-S-583260 2,400 3,000 6,000 32 - 60” V-S-5865108 8,000 10,000 20,000 65 - 108”
3/4” Y-S-343872 3,200 4,000 8,000 38 - 72” V-S-3475108 10,400 13,000 26,000 75 - 108”
7/8” Y-S-784696 4,800 6,000 12,000 46 - 96” V-S-7887120 14,800 18,500 37,000 87 - 120”
1” Y-S-10054120 6,000 7,500 15,000 54 - 120” - - - - -

DOUBLE-LEG ADJUSTABLE ROPE SLINGS


ROPE STOCK YALEX W.L.L. (LBS.) ADJ. STOCK VECTRUS W.L.L. (LBS.)
ADJ. RANGE
DIAMETER NUMBER 60 DEG 45 DEG RANGE NUMBER 60 DEG 45 DEG
3/8” Y-D-382460 1,700 1,400 24 - 60” V-D-383060 6,000 4,900 30 - 60”
1/2” Y-D-123260 3,400 2,800 32 - 60” V-D-1243672 9,500 7,700 36 - 72”
5/8” Y-D-583860 5,100 4,200 38 - 60” V-D-5857108 17,3000 14,100 57 - 108”
3/4” Y-D-344672 6,900 5,600 46 - 72” V-D-3467108 22,500 18,300 67 - 108”
7/8” Y-D-785296 10,300 8,400 52 - 96” V-D-7876120 32,000 26,100 76 - 120”
1” Y-D-10060120 12,100 9,800 60 - 120” - - - -

FOUR-LEG ADJUSTABLE ROPE SLINGS


ROPE STOCK YALEX W.L.L. (LBS.) ADJ. STOCK VECTRUS W.L.L. (LBS.)
ADJ. RANGE
DIAMETER NUMBER 60 DEG 45 DEG RANGE NUMBER 60 DEG 45 DEG
3/8” Y-Q-382460 2,500 2,100 24 - 60” V-Q-383060 9,000 7,400 30 - 60”
1/2” Y-Q-123260 5,000 4,200 32 - 60” V-Q-1243672 14,200 11,600 36 - 72”
5/8” Y-Q-583884 7,700 6,300 38 - 84” V-Q-5857108 25,900 21,200 57 - 108”
3/4” Y-Q-344684 10,300 8,400 46 - 84” V-Q-3467108 33,700 27,500 67 - 108”
7/8” Y-Q-785296 15,500 12,700 52 - 96” V-Q-7876120 48,000 39,200 76 - 120”
1” Y-Q-10060120 18,100 14,800 60 - 120” - - - -

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
92 4/24/06 3:42 PM Page 642

91-06

LIFT-IT MFG. CO., INC.


WHEEL NETS
Wheel nets are used in matched pairs to handle vehicles of various sizes and weights. These assemblies are designed
and fabricated to meet specific application requirements.

“R” (RING) NET CONFIGURATION “L” (LOOP) NET CONFIGURATION

The Work Load Limit (W.L.L.) is based on using


Please specify: two nets. The design criteria calls for one net to be
1. Net configuration - “R” (Ring) or “L” (Loop) capable of lifting up to 75% of the total load.
2. Body width “B” and length “A”
3. Lifting tail length “D”
4. Required work load limit WHEEL NET SYSTEMS
per pair of wheel nets.
5. Grid size “E” and “F” are dictated by the Wheel net systems are available with a wide range of
overall strength requirement. working loads. The wheel net system features a
Sizes are available on request. spreader bar and sling bridles to connect the wheel net
6. Pad length “H” and spacing between pads “G” to the bar. Reusable storage boxes can be supplied
are necessary for “R” (Ring) net configurations. and are recommended.
Standard models are offered for “R” (Ring) net
configurations only.

“R” (RING) NET SPECIFICATIONS


Stock No. WN 5000 WN 17000 WN 30000

W.L.L. (LBS) 10,000 34,000 60,000


Masterlink
1-1/4” 1-1/2” 1-3/4”
(Diameter)
Body Width 36” 48” 66”
“B”
Overall Length
184” 212” 294”
“A”
Tail Length
44” 46” 81”
“D”
Pad Length 48” 48” 54”
“H”
Gap Distance – 24” 24”
“G”
Body O.A.L. 96” 120” 132”
“C”
DO NOT EXCEED WORK LOAD LIMITS

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
3044 4/24/06 3:42 PM Page 642

92-06

LIFT-IT MFG. CO., INC.


DRUM HANDLING SLINGS
BOTTOM SUPPORT STANDARD & ADJUSTABLE
The bottom-support drum sling was Nylon drum handling slings are specifically
specifically designed for handling designed for the efficient handling of 55-
drums that are non-metallic or larger gallon, ribbed, metal drums. Drum slings can
than 55-gallon capacity. Also be used to lift open-top drums, or even drums
recommended when drum fitted with spigots or pumps.
transportation cannot be kept low
The sling consists of a 2" bridle and a 2" cir-
enough to only clear the ground. cumferential tightening band. The lift bridle is
The sling consists of a bridle which permanently attached to the tightening band,
thus eliminating the need to position the
is permanently attached to the
bridle.
circumferential tightening bands.
Stability in handling is facilitated by The circumferential tightening band is lined
the connection of the sling bridle with leather and the bridle legs have sleeves
assembly to the bottom support at attached for wear protection purposes. The
four locations. tightening band securely grips the drum below
the first rib.
The bottom support drum sling was
designed for 55-gallon drums (22" Lift the drum only enough to clear the ground.
diameter x 34" height). Slings for Extra consideration should be given when
drum sizes other than the standard handling partially filled drums to ensure load
55-gallon are available upon control.
request. Work
Sling
Sling Load
Extra consideration should be given Band *Specify the DS1-602 ADJ adjustable
Stock No. Limit drum sling for use with drums of
Sling Work Load Width
when handling partially filled drums (lbs.) varying diameters. The DS1-602 ADJ
Stock No. Limit (lbs.) to ensure load control. 2 in. DS1-602 750 is the same as the standard DS1-602
model, except that only one of the lift
DS-BS 2000 2 in. DS1-602 ADJ* 750 loop legs is attached to the
circumferential tightening band.
The unattached leg is free to be positioned for varying drum diameters. The
leather wear pad normally attached to the tightening band on the standard model is
omitted on the adjustable model to facilitate usage.

HORIZONTAL DRUM SLING VERTICAL DRUM SLING


The horizontal drum sling is The vertical drum sling was initially
designed for efficiently handling developed for the US Department of
steel drums in the horizontal Energy and has become a very
position. popular sling for industrial use. The
VD-1 has a 1500 lb. work load and
The HD-1 features 1" polyester features heavy duty 1" nylon webbing.
webbing and has a work load of
1000 lbs. The 1" masterlink facilitates
connection to the lifting mechanism,
The 1/2" masterlink connects while three drum hooks positively
to the lifting mechanism and engage the drum lip. As the lift is
2-7/8" drum hooks positively made a collector ring provides for a
engage the ends of the drum. self-tightening grip.

Please Note: Please Note:


• For use on metal drums only • For use on metal drums only
• Damaged drum contact areas will not allow the sling • Damaged drum contact areas will not allow the sling
to work properly to work properly

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
Lift-It 93 New 4/24/06 4:00 PM Page 1

93-06

LIFT-IT MFG. CO., INC.


RATCHET TIEDOWN ASSEMBLIES
Tiedown assemblies tighten to the contour of the load, protecting it from slippage. They are fabricated with high-strength polyester or nylon webbing that has been
treated for abrasion resistance. Fittings are corrosion resistant. End fittings on all assemblies are face down unless otherwise specified. Assemblies include an extra 6"
of webbing for a pull tab. Specified lengths include fittings. Standard fixed length is 18".
All assemblies require inspection each time they are used. Extended exposure to the ultraviolet rays of the sun will cause degradation of the assemblies’ strength.
Sliding sleeves are an available option to protect the webbing from rough or cutting edges. Tiedown assemblies should never be tied into knots or allowed to become
knotted. These assemblies are load control devices and should never be used for any overhead lifting.
All strengths shown are break strengths. Working load limits should be evaluated by the user prior to the selection of the appropriate components. A good rule of
thumb would be to secure cargo with an assembly strength equal to 3 times the weight of the cargo. The breaking strengths listed apply only to new and unused
components/assemblies. Remember, all assemblies or tiedown systems are as strong as the weakest component, including the point of attachment.

2 In. x 30 Ft. 1,666 lbs. WORK LOAD LIMIT - 5,000 lbs. BREAK STRENGTH

STOCK NO 5-3F-30 STOCK NO 5-2G-30 STOCK NO 5-LP-30

STOCK NO 5-2J-30 STOCK NO 5-3J-30 STOCK NO 5-2Q-30

2 In. x 30 Ft. 3,333 lbs. WORK LOAD LIMIT - 10,000 lbs. BREAK STRENGTH

STOCK NO 10-3F-30 STOCK NO 10-3E-30 STOCK NO 10-LP-30

STOCK NO 10-3G-30 STOCK NO 10-3J-30 STOCK NO 10-3N-30

3 In. x 30 Ft. 5,000 lbs. WORK LOAD LIMIT - 15,000 lbs. BREAK STRENGTH

STOCK NO 15-3V-30 STOCK NO 15-F7-30 STOCK NO 15-LP-30

STOCK NO 15-3Y-30 STOCK NO 15-T7-30 STOCK NO 15-3Z-30

4 In. x 30 Ft. 6,666 lbs. WORK LOAD LIMIT - 20,000 lbs. BREAK STRENGTH

STOCK NO 20-4A-30 STOCK NO 20-F7-30 STOCK NO 20-LP-30

STOCK NO 15-3Y/5R-30* STOCK NO 20-T7-30 STOCK NO 20-3Z-30

*AVAILABLE IN 5000 LBS. WLL ONLY

• Telephone (323) 582-6076


Lift-It Manufacturing Co., Inc.
• Fax: (323) 587-1630
4780 Corona Avenue
• E-mail: liftit@pacbell.net
Los Angeles, California 90058-3808
• Web Page: www.lift-it.com
Lift-All 94 4/24/06 4:02 PM Page 1

94-06

LIFT-ALL CO., INC.


SIDE-PULL HOIST RINGS
Hoist Ring full swing & pivot action allows
flipping & turning of parts without unhooking.
Extra-large diameter rings accept almost any
size hook.

• Material: Alloy Steel


• Clevis, Ring, Bushing and Cap Screw
are magnetic particle inspected.
• Clevis is x-rayed.
• Finish: Black Oxide

Side-Pull Hoist Rings Replacement Bolts


Dimensions in Inches
LOAD1
PART CAPACITY A B C D E F G TORQUE2 WT. PART THREAD WT.
NUMBER (lbs.) (lb. ft.) (lbs.) NUMBER SIZE (lbs.)
09417 650 5/16-18 2 2 1/8 2 1 1/2 5/8 3/8 3.5 .25 09421 5/16-18 .05
09418 800 3/8-16 2 2 3/8 2 1 1/2 3/4 3/8 4.5 .25 09422 3/8-16 .06
09398 1800 1/2-13 3 3 3/8 3 3/16 2 3/8 1 5/8 15.0 3.25 09423 1/2-13 .17
09399 2500 5/8-11 3 3 5/8 3 3/16 2 3/8 1 1/4 5/8 25.0 3.25 09424 5/8-11 .28
09400 4100 3/4-10 4 5 5 3 3/4 1 1/2 1 50.0 11.25 09425 3/4-10 .59
09401 7100 1-8 4 5 3/8 5 3 3/4 2 1 90.0 11.50 09426 1-8 1.27
09419 14000 1 1/4-7 6 6 7/8 6 13/16 4 5/8 2 1 3/8 150.0 27.75 09427 1 1/4-7 2.50
09402 17200 1 1/2-6 6 7 7/8 6 13/16 4 5/8 2 1/2 1 3/8 250.0 31.50 09428 1 1/2-6 4.70
09420 29000 2-4 1/2 5 1/4 x 10 1/2 10 6 13/16 4 5/8 3 1/8 1 1/2 300.0 42.00 09429 2-4 1/2 9.50

Metric Side-Pull Hoist Rings


• Bushing: Zinc Plated Blue
Dimensions in Millimeters
Replacement Bolts
LOAD1 THREAD
PART CAPACITY A B C D E F G TORQUE2 WT. (Kg) PART THREAD WT. (Kg)
NUMBER (Kg) Kg•M NUMBER SIZE
09468 325 M 8 X 1.25 50.8 61 50.8 38.1 16 9.5 .43 .12 09475 M8 .02
09469 500 M 10 X 1.50 50.8 63 50.8 38.1 20 9.5 .60 .12 09476 M 10 .03
09470 725 M 12 X 1.75 76.2 85 81 60.3 24 15.9 2.00 1.47 09477 M 12 .07
09471 1400 M 16 X 2.0 76.2 94 81 60.3 31 15.9 3.50 1.47 09478 M 16 .14
09472 2290 M 20 X 2.5 101.6 133 25.4 95.3 40 25.4 7.00 5.10 09479 M 20 .32
09473 3050 M 24 X 3.0 101.6 147 25.4 95.3 47 25.4 12.50 5.22 09480 M 24 .53
09474 4850 M 30 X 3.5 127.0 173.8 31.7 117.5 43.6 31.7 34.6 12.61 09481 M 30 1.03

1 Stated load capacity based on specific thread torques as shown in chart.


2 It is recommended that these torques be used when installing hoist rings. Rated at 5:1 Strength Factor.

AVAILABLE THROUGH MASTER MARINE DISTRIBUTOR:


SLINGS
WUENSCH SALES CO. (see page 1405)
TIEDOWNS HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
HOIST RINGS E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
Lift-All 95 4/29/06 5:40 PM Page 1

95-06

LIFT-ALL CO., INC.


CENTER-PULL HOIST RINGS
• Full swivel and pivot action
• Stronger than eyebolts • Material: Alloy Steel
• Rated at 5:1 strength factor • Finish: Black Oxide
• Washer: Zinc Plated Blue • Clevis, Bolt, Pins, Base,
Washer and Bushing
are Magnetic Particle
Inspected.
Dimensions in Inches Bolt Kits3
THREAD LOAD1 STD. CLEVIS LONG CLEVIS THREAD
SIZE CAPACITY PART PART LENGTH RADIUS DIA. TORQUE2 WT. PART WT.
A (lbs.) NUMBER B NUMBER B C D E F G H (lb. ft.) (lbs.) NUMBER (lbs.)
5/16-18 800 09439 2-21/32 – – 9/16 3/4 7/16 3/8 1-27/32 1 1/4 7 .3 09488 .03
3/8-16 1000 09387 2-21/32 – – 9/16 3/4 7/16 3/8 1-27/32 1 1/4 12 .3 09449 .05
1/2-13 2500 09440 3-3/4 – – 1 1/16 1-3/16 11/16 1/2 2-9/16 2 3/8 28 1.0 09450 .16
1/2-13 2500 09441 4-25/32 09506 6-23/32 3/4 1-1/2 7/8 3/4 3-1/2 2 3/8 28 2.5 09451 .14
1/2-13 2500 09388 4-25/32 09507 6-23/32 1 1-1/2 7/8 3/4 3-1/2 2 3/8 28 2.5 09452 .16
1/2-13 2500 09442 4-25/32 09508 6-23/32 1 1/4 1-1/2 7/8 3/4 3-1/2 2 3/8 28 2.5 09453 .17
5/8-11 4000 09443 4-25/32 09509 6-23/32 1 1-1/2 7/8 3/4 3-1/2 2 1/4 60 2.7 09454 .27
5/8-11 4000 09389 4-25/32 09510 6-23/32 1 1/4 1-1/2 7/8 3/4 3-1/2 2 1/4 60 2.7 09455 .29
3/4-10 5000 09390 4-25/32 09511 6-23/32 1 1-1/2 7/8 3/4 3-1/2 2 1/8 100 3.0 09456 .40
3/4-10 5000 09391 4-25/32 09512 6-23/32 1 1/2 1-1/2 7/8 3/4 3-1/2 2 1/8 100 3.0 09457 .46
3/4-10 7000 09392 6-1/2 09513 8-23/32 1 2-5/16 1-13/32 1 5-1/8 2 15/16 100 7.0 09458 .46
3/4-10 7000 09444 6-1/2 09514 8-23/32 1 1/2 2-5/16 1-13/32 1 5-1/8 2 15/16 100 7.0 09459 .52
7/8-9 8000 09445 6-1/2 09515 8-23/32 1 2-5/16 1-13/32 1 5-1/8 2 13/16 160 7.0 09460 .62
7/8-9 8000 09393 6-1/2 09516 8-23/32 1 1/4 2-5/16 1-13/32 1 5-1/8 2 13/16 160 7.0 09461 .66
1-8 10000 09394 6-1/2 09517 8-23/32 1 1/4 2-5/16 1-13/32 1 5-1/8 2 11/16 230 7.5 09462 .92
1-8 10000 09395 6-1/2 09518 8-23/32 1 1/2 2-5/16 1-13/32 1 5-1/8 2 11/16 230 7.5 09463 .97
1-8 10000 09446 6-1/2 09519 8-23/32 2 1/4 2-5/16 1-13/32 1 5-1/8 2 11/16 230 7.5 09464 1.1
1 1/4-7 15000 09396 8-23/32 – – 1 7/8 3-3/16 1-3/4 1-1/4 6-1/2 4 3/16 470 14 09465 2.9
1 1/2-6 24000 09397 12-15/32 – – 2 3/4 4-3/16 2-1/4 1-3/4 8-1/2 6 5/16 800 33 09466 3.5
2-4 1/2 30000 09447 12-15/32 – – 3 1/8 4-3/16 2-1/4 1-3/4 8-1/2 5 13/16 800 36 09467 7.3

1 Stated load capacity based on specific thread torques as shown in chart.


2 It is recommended that these torques be used when installing hoist rings.
3 Bolt Kit contains bolt and retaining ring.

Metric Center-Pull Hoist Rings Dimensions in Millimeters Bolt Kits3


Thread Load1 Std. Clevis Long Clevis Thread
Size Capacity Part Part Torque2 Wt. Part Wt.
A (Kg) Number B Number B C D E F G (Kg • M) (Kg) Number (KG)
M8x1.25 400 09482 67.8 12.5 19.0 10.9 9.7 46.7 1.0 .17 09489 .02
M10x1.50 450 09483 67.8 17.5 19.0 10.9 9.7 46.7 1.7 .17 09490 .03
M12x1.75 1050 09403 121.4 09520 170.7 19.0 38.1 22.4 19.0 89.4 3.8 1.08 09491 .06
M16x2.0 1900 09404 121.4 09521 170.7 29.0 38.1 22.4 19.0 89.4 8.2 1.12 09492 .12
M20x2.5 2150 09484 121.4 09522 170.7 34.0 38.1 22.4 19.0 89.4 13.6 1.19 09493 .21
M20x2.5 3000 09405 165.6 09523 206.0 32.0 58.7 35.6 25.4 130.6 13.6 3.03 09494 .23
M24x3.0 4200 09406 165.6 09524 206.0 37.0 58.7 35.6 25.4 130.6 31.0 3.10 09495 .40
M30x3.5 7000 09407 221.7 41.9 81.0 44.5 31.7 165.1 60.0 6.3 09496 .79
M30x3.5 7000 09485 221.7 61.7 81.0 44.5 31.7 165.1 60.0 6.4 09497 .91
M36x4.0 11000 09486 316.7 63.5 106.4 57.2 44.4 217.2 100.0 15.5 09498 1.52
M42x4.5 12500 09487 316.7 68.0 106.4 57.2 44.4 217.2 100.0 16.0 09499 2.75
M48x5.0 13500 09488 316.7 82.4 106.4 57.2 44.4 217.2 100.0 16.8 09500 3.27

1 Stated load capacity based on specific thread torques as shown in chart.


2 It is recommended that these torques be used when installing hoist rings.
3 Bolt Kit contains bolt and retaining ring.

AVAILABLE THROUGH MASTER MARINE DISTRIBUTOR:


SLINGS
WUENSCH SALES CO. (see page 1405)
TIEDOWNS HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
HOIST RINGS E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
0096-04 4/29/06 5:40 PM Page 1

96-06

LIFT-ALL CO., INC.


ADJUSTABLE ALLOY CHAIN SLING
Patent #4941698

Features
MASTER
CONTROL • Grade 80 Alloy Chain
LINK • Alloy Steel Master Control Link
THREE • Each assembly serialized for
ADJUSTING traceability
SLOTS SINGLE • Complies with OSHA – proof tested
POINT
PICK UP and certified

BASKET
HITCH

LOAD
BALANCED

SINGLE DOUBLE BASKET

MASTER
CONTROL
SLING
LINK
SERIAL
NUMBER
CAPACITY
RATING

CAPACITIES CHAIN WT. WT. WT.


SINGLE DOUBLE DIMENSIONS LENGTHS CHAIN 6 FT. 10 FT. 14 FT.
@90° @60° A B C *D1 *D2 SIZE LENGTH LENGTH LENGTH
2100 lbs. 3600 lbs. 2" 2" 15/16" 6 ft. 10 ft. 7/32" 4 1/2 lbs. 6 1/2 lbs. –
3500 lbs. 6100 lbs. 3" 31/2" 1-1/16" 6 ft. 10 ft. 9/32" 8 lbs. 11 lbs. –
7100 lbs. 12300 lbs. 31/4" 31/4" 1-9/16" 10 ft. 14 ft. 3/8" – 19 lbs. 25 lbs.
12000 lbs. 20800 lbs. 43/8" 43/8" 2" 10 ft. 14 ft. 1/2" – 42 lbs. 52 lbs.

Sling capacity rating decreases as the angle from horizontal decreases. We do not recommend using at angles of less
than 45°. Loads must always be securely attached and balanced. You must never substitute another chain or exceed
the load limit. The load bearing chain must be seated at the base of adjusting slot of the Master Control link. The alloy
chain and master control link shall not be used separately for general purpose lifting. Do not exceed rated capabilities.

AVAILABLE THROUGH MASTER MARINE DISTRIBUTOR:


SLINGS
WUENSCH SALES CO. (see page 1405)
TIEDOWNS HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
HOIST RINGS E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
0097-04 4/29/06 5:41 PM Page 1

97-06

LIFT-ALL CO., INC.


CHAIN MESH SLINGS
To order, please specify:
1. Chain size (7/32", 9/32", 3/8", or
1/2")
2. Type 1 (Triangle & Choker) or
Type 2 (Triangle & Triangle)
3. Number of parts of chain
4. Length – Feet (Bearing point to
Type 1
bearing point)
Chain Parts Sling 5 ft. Wt.
Size of Width Terminal Dimensions Type 2 per ft.
Chain Parts Sling Rated Capacity (lbs.*)
(in.) Chain (in.) (in.) Wt. (lbs.) (lbs.)
Size of Width V.
(in.) Chain (in.) Vertical Choker Basket D IL TL TW CL CW T H
7/32 3 1-1/2 5,000 5,000 10,000 7/32 3 1-1/2 2-3/4 4-1/8 6-3/4 4-3/4 9 7-1/8 3/8 1-1/4 10 1.3
7/32 4 2 6,700 6,700 13,400 7/32 4 2 3 4-1/2 7-1/8 5 9-3/8 7-1/4 3/8 1-1/4 12 1.8
7/32 5 2-1/2 8,400 8,400 16,800 7/32 5 2-1/2 3-1/2 5-1/4 8 5-1/2 10-1/8 7-3/4 3/8 1-1/4 14 2.2
7/32 6 3 10,000 10,000 20,000 7/32 6 3 3-3/4 5-5/8 8-1/4 5-3/4 10-5/8 8-1/4 3/8 1-1/4 17 2.7
9/32 3 2-1/8 8,400 8,400 16,800 9/32 3 2-1/8 2-3/4 4-1/8 6-3/4 4-3/4 9 7-1/8 1/2 1-3/4 14 2.2
9/32 4 2-3/4 11,000 11,000 22,000 9/32 4 2-3/4 3 4-1/2 7-1/8 5 9-3/8 7-1/4 1/2 1-3/4 18 3.0
9/32 5 3-3/8 14,000 14,000 28,000 9/32 5 3-3/8 3-1/2 5-1/4 8 5-1/2 10-1/8 7-3/4 1/2 1-3/4 22 3.7
9/32 6 4 16,800 16,800 33,600 9/32 6 4 3-3/4 5-5/8 8-1/4 5-3/4 10-5/8 8-1/4 1/2 1-3/4 26 4.5
3/8 3 3-1/4 17,000 34,000 3/8 3 3-1/4 3-1/2 5-1/4 6-7/8 5 3/4 2-1/4 30 4.4
3/8 4 4-3/8 22,700 45,400 3/8 4 4-3/8 4-3/8 6-1/2 8-1/8 6-3/8 3/4 2-1/4 41 5.8
3/8 5 5-3/8 28,400 56,800 3/8 5 5-3/8 4-3/8 6-1/2 8-3/8 7-3/8 3/4 2-1/4 55 7.3
3/8 6 6-1/2 34,000 68,000 3/8 6 6-1/2 5-1/4 7-7/8 9-3/4 8-1/4 3/4 2-1/4 59 8.8
1/2 2 3 19,200 38,400 1/2 2 3 3-1/2 5-1/4 6-7/8 5 1 3-1/8 33 5.2
1/2 3 4-1/2 28,800 57,600 1/2 3 4-1/2 4-3/8 6-1/2 8-3/8 6-3/8 1 3-1/8 50 7.7
1/2 4 6 38,400 76,800 1/2 4 6 5-1/4 7-7/8 9-3/4 7-3/4 1 3-1/8 62 10.3
Note: Length tolerance ± 2 chain links so plane is maintained.

BRAIDED ROUNDSLINGS
CAPACITIES IN LBS. APPROXIMATE WEIGHTS AND DIMENSIONS
Vertical Choker Basket

(L) (EL)
Min. Weight Std. Eye Body Under Load—In.
Code Color Ft. Lb/Ft Length Width W Thickness
6 PART TUF-BRAID SLINGS
B6E30 Purple 6,700 5,300 13,400 4-1/2 .8 15" 3-1/4" 3/4"
B6E60 Green 13,500 10,800 27,000 5 1.2 15" 3-3/4" 1-1/8"
B6E90 Yellow 21,400 17,100 42,800 5-1/2 1.6 15" 4-1/4" 1-1/4"
B6E120 Tan 27,000 21,600 54,000 5-1/2 2.0 15" 4-1/2" 1-5/16"
B6E150 Red 33,600 26,800 67,200 6-1/2 2.7 20" 5-1/4" 1-3/4"
B6E180 White 42,800 34,200 85,600 7 3.2 20" 5-1/2" 2"
B6E240 Blue 54,000 43,200 108,000 9 4.4 20" 6-5/8" 2-1/4"
B6E360 Grey 79,000 63,200 158,000 9-1/2 6.5 30" 8-1/4" 2-1/2"
B6E600 Brown 135,100 108,000 270,200 10-1/2 9.7 30" 11" 2-3/4"
B6E800 Olive 168,300 134,600 336,600 13 12.0 30" 12" 4"
B6E1000 Black 229,500 183,600 459,000 14-1/2 15.6 31" 13-1/2" 4-1/2"
8 PART TUF-BRAID SLINGS
Code Color Vertical Choker Basket Min. L Wt/Ft. EL-In. W Thickness
B8E30 Purple 8,800 7,100 17,600 4-1/2 1.1 15" 3-1/2" 1"
B8E60 Green 18,000 14,400 36,000 5 1.5 15" 4" 1-3/8"
B8E90 Yellow 28,500 22,800 57,000 5-1/2 2.2 15" 4-3/4" 1-5/8"
B8E120 Tan 36,000 28,800 72,000 5-1/2 2.6 15" 5" 1-3/4"
B8E150 Red 44,900 35,900 89,800 6-1/2 3.6 20" 6" 2-1/8"
B8E180 White 57,100 45,600 114,200 7 4.1 20" 6-1/4" 2-1/2"
Multiple part B8E240 Blue 72,000 57,600 144,000 9 5.6 20" 7-1/2" 2-3/4"
B8E360 Grey 105,400 84,300 210,800 9-1/2 8.3 30" 9-1/2" 3-1/4"
construction
B8E600 Brown 180,200 144,100 360,400 10-1/2 12.0 30" 13" 3-3/4"
for redundant B8E800 Olive 224,400 179,500 448,800 13 16.0 30" 13-1/2" 4-1/2"
safety B8E1000 Black 306,000 244,000 612,000 14-1/2 20.0 31" 15-3/4" 5-1/4"

AVAILABLE THROUGH MASTER MARINE DISTRIBUTOR:


SLINGS
WUENSCH SALES CO. (see page 1405)
TIEDOWNS HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
HOIST RINGS E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
Bungee 96 4/24/06 11:19 PM Page 1

98-06

THE ORIGINAL BUNGEE COMPANY


ELASTIC STRETCH CORDS
The shockcords have a multi-stranded latex rubber interior with either a polypropylene, nylon or ocefiber cover.
Ocefiber is first quality bleached white yarn, making it resistant to most caustic chemicals and UV exposure. This product is
recommended for marine and harsh environment applications. It is recognized by the blue tracer braided throughout.
Nylon is also a white yarn, but is not treated for resistance to UV exposure. Nylon is also recommended for marine and harsh
environment application, but is subject to color change when exposed to light for long periods of time. It is recognized by the black
tracer braided throughout.
INDIVIDUAL ELASTIC CORDS

Ocefiber cover Reference Number Length Pack Wt. Heavy duty (black Reference Length Pack Wt.
with dichromated Ocefiber Nylon (in.) ( lbs.) polypropylene Number (in.) (lbs.)
hooks, or nylon OD 11-40 NS 11-40 16 4 cover). End fittings T 13-40 16 5
with stainless OD 11-60 NS 11-60 24 5 are dichromated T 13-45 18 5-1/2
steel hooks. OD 11-80 NS 11-80 32 6 steel. T 13-60 24 6
Cord Diameter: OD 11-100 NS 11-100 40 7 Cord diameter: T 13-80 32 7
13/32” (10mm) OD 11-120 NS 11-120 48 8 T 13-100 40 8
13/32” (10mm)
OD 11-140 NS 11-140 56 9 T 13-120 48 9
Packs of 25. OD 11-160 NS 11-160 64 10 Packs of 25. T 13-140 56 10
OD 11-180 NS 11-180 72 11 T 13-160 64 11
T 13-180 72 12

HOOKS FOR ELASTIC CORDS


BULK-SPOOL
ELASTIC Dichromated Steel Hooks
CORDS Pack of 50

Plastic Coated Steel Hooks


Cover Reference Diameter Spool Wt. Pack of 50
Material Number (in.) (mm) (lbs.)
White SPOC 6 1/4 6 8
Ocefiber SPOC 8 5/16 8 10
with SPOC 9 3/8 9 12 Stainless Steel Hooks
Blue Tracer SPOC 10 13/32 10 15 Pack of 50
SPOC 12 1/2 12 22
SPHD 6 1/4 6 8
Heavy Duty SPHD 8 5/16 8 10
Plastic-Coated Steel Dichchromated Steel or
Black SPHD 9 3/8 9 12
Hooks Stainless Steel Hooks
Polypropylene SPHD 10 13/32 10 15
SPHD 12 1/2 12 22 Reference Cord Dia. Pk. Wt. Reference Number Cord Dia. Pk. Wt.
SPNL 3 1/8 3 3 Number (in.) (mm) (lbs.) Dichrom. Stainless (in.) (mm) (lbs.)
White SPNL 4 5/32 4 4 – – – – DH 4-50 SH 4-50 5/32 4 0.45
Nylon SPNL 5 3/16 5 6 PH 5-50 3/16 5 1.60 DH 5-50 SH 5-50 3/16 5 1.45
with SPNL 6 1/4 6 8 PH 6-50 1/4 6 2.10 DH 6-50 SH 6-50 1/4 6 2.05
Black Tracer SPNL 8 5/16 8 10 PH 8-50 5/16 8 2.20 DH 8-50 SH 8-50 5/16 8 3.40
SPNL 9 3/8 9 12 PH 9-50 3/8 9 2.90 DH 9-50 SH 9-50 3/8 9 3.95
SPNL 10 13/32 10 15 PH 10-50 13/32 10 3.75 DH 10-50 SH 10-50 13/32 10 4.70
SPNL 12 1/2 12 22 PH 12-50 1/2 12 4.10 DH 12-50 SH 12-50 1/2 12 5.40

THE ORIGINAL BUNGEE COMPANY


25100 S. Normandie Ave., Unit D
Harbor City, CA 90710
Tel: 866-286-4331 • Fax: 800-591-0993
E-mail: sales@bungeeco.com ®
www.bungeeco.com
3040 4/24/06 4:06 PM Page 642

99-06

BUFFERS USA INC.


HATCH COVER SPARE PARTS
Cleat Assembly

1868-A 1868-B 1860 1948


Sub for BP7A-S Type A Sub for BP7A-S Type B Sub for HC-41 Quick Acting, Heavy Duty
Sub for 13.04

Cleat Assembly

13.00 & 13.01 13.02 13.03 13.04


Quick Acting Quick Acting Quick Acting, Heavy Duty Quick Acting, Heavy Duty
Rod L = 315 mm & 405 mm x M22 Rod L = 180 mm x M22 Rod L = 440 mm x M33 Rod L = 285 mm x M33

Balancing Roller Assembly

22.00 22.00 24.00 24.00


2.5 - 4 Tons 2.5 - 4 Tons Above 4 Tons Above 4 Tons
Single link plate 22.07.06 Double link plate 22.06.06 Single link plate 24.00.01-S Double link plate 24.00.01-D

Eccentric Wheel Assembly Junction Pieces Wedge Assembly

20.00 40.50 Left (Shown) 12.00


Cross Joint
Eccentric Wheel Assembly 40.51 Right
Ø = 200 mm For Single-Pull Covers

The Intermodal Hardware Specialists


BUFFERS USA
10180 New Berlin Road • Jacksonville, FL 32226 USA • Tel: +1 904 696 0010 • Fax: +1 904 696 0019 • E-mail: sales@buffersusa.com • Web: www.buffersusa.com
3041 4/25/06 7:35 PM Page 642

100-06

BUFFERS USA INC.


HATCH COVER GASKETS

EPDM Rubber Gaskets Sponge Rubber Gaskets

Model 1899 Model 1820 Model 1802 Model 1803


72 x 67 mm 57 x 48 mm 3 sided 3 sided, 57 x 32 mm
Sub for MGN 10977 38 x 32 mm Sub for ZZ57

Sponge Rubber Gaskets

Model 1804 Model 1805 Model 1806 Model 1813


3 sided, 71 x 32 mm 3 sided, 71 x 40 mm 3 sided Self skinned
Sub for MGN 10972 Sub for MGN 10964 94 x 50 mm 25 x 25 mm

Sponge Rubber Gaskets

Model 1814 Model 1815 Model 1816 Model 1817


Self skinned Self skinned Self skinned Self skinned
25 x 32 mm 25 x 38 mm 19 x 25 mm 19 x 32 mm

Sponge Rubber Gaskets Sponge Rubber Pads

Model 1818 Mk 8 Mk 9 MM05 (Mk 1)


Self skinned Terminal Piece Terminal Piece, straight end 45° Two-way Joint
19 x 38 mm 71 x 40 x 140 mm 71 x 32 mm 71 x 32 mm

The Intermodal Hardware Specialists


BUFFERS USA
10180 New Berlin Road • Jacksonville, FL 32226 USA • Tel: +1 904 696 0010 • Fax: +1 904 696 0019 • E-mail: sales@buffersusa.com • Web: www.buffersusa.com
3042 4/25/06 7:36 PM Page 642

101-06

BUFFERS USA INC.


HATCH COVER GASKET PARTS

Sponge Rubber Pads

10.00.09 (MM04A) 10.00.09 (MM04A) 10.00.09 (MM04A) 10.00.10


Three-way Pad, H=112 mm Three-way Pad, H=134 mm Three-way Pad, H=150 mm End Piece, curved R50
10.71 x 32 - 3/112 10.71 x 32 - 3/134 10.71 x 32 - 3/150 10.71 x 32 - 30
10.71 x 40 - 3/112 10.71 x 40 - 3/134 10.71 x 40 - 3/150 10.71 x 40 - 30
10.94 x 50 - 3/112 10.94 x 50 - 3/134 10.94 x 50 - 3/150 10.94 x 50 - 30

Sponge Rubber Pads

MM02A (Mk 4) MM06 (Mk 3) MM09 MM10 (10.00.13)


90° Flat Angle Joint Terminal Piece Angle Joint Flat End Joint
10.71 x 32 - 90F 71 x 32 mm 94 x 50 mm 10.94 x 50
10.71 x 40 - 90F
10.94 x 50 - 90F

Sponge Rubber Pads

3-way corner 90° Left 3-way corner 90° Right 3-way corner 45° Mk7
10.71 x 32 - 3/L 10.71 x 32 - 3/R Right/Left 90° ‘L’ Shaped
10.71 x 40 - 3/L 10.71 x 40 - 3/R 10.71 x 32 - 90S
10.94 x 50 - 3/L 10.94 x 50 - 3/R 10.71 x 40 - 90S
10.71 x 50 - 90S
Sponge Rubber Pads

End piece End piece 90° End piece ZZ71N, 30°, curved MM07A (Mk 2)
10.71 x 32 - 107 10.71 x 32 - 30/60E 10.71 x 32 - 30 Left or right hand
10.71 x 40 - 107 10.71 x 40 - 30/60E 10.71 x 40 - 30 71 x 32 mm
10.94 x 50 - 107 10.94 x 50 - 30/60E 10.94 x 50 - 30

The Intermodal Hardware Specialists


BUFFERS USA
10180 New Berlin Road • Jacksonville, FL 32226 USA • Tel: +1 904 696 0010 • Fax: +1 904 696 0019 • E-mail: sales@buffersusa.com • Web: www.buffersusa.com
0098-04 4/25/06 7:42 PM Page 1

102-06

MORSE-STARRETT PRODUCTS CO.

WINDOW SQUEEGEES with Magi-Klip


Sizes: 6”, 8”, 10”, 12”, 14”, 16” and 18”

The Magi-Klip is part of the handle of the squeegee.


It holds the rubber and channel firmly in place.
Simply press the Magi-Klip and the rubber and
channel can be instantly removed or positioned to
suit the work at hand.

The products above and below this line are not available from the same manufacturing source.

BILLY PUGH CO., INC.


CARGO NETS
HELICOPTER PAD SAFETY NETS

To order, specify:
1) Net size
2) Mesh size
3) Rope diameter
4) Rope material
1) Polypropylene
2) Nylon
3) Manila

Cargo nets and safety nets can also be made


from nylon webbing. Please specify if desired.

NYLON FALL-PROTECTION NETS

Border Rope: 9/16” diameter, 3 lay, nylon, 8000 lb. test.

Net Bed: 2-1/2” knotless nylon netting 41-W.T.,


No. 72 (200 x 4); Mil. Spec. 152; breaking
strength test, 550 lbs./mesh.

Net Coating: Ultra violet screening and abrasion resistance.

To order, specify net size.

DOOLEY TACKABERRY, INC. PT. HUENEME MARINE SUPPLY


Fire and Safety Equipment Oilfield, Vessel, Military
Houston • Freeport • Beaumont • Baton Rouge & Industrial Supplies
Tel: (281) 479-9700 Port Hueneme, California
www.billypugh.com
Fax: (281) 479-6321 Tel: (805) 488-0988 • Fax: (805) 488-3141
0099-04 4/25/06 7:41 PM Page 1

103-06

PEDLEY NETS

NETS WITHOUT KNOTS


Nets and ladders incorporate the unique intersection of glass fiber reinforced polyester resin,
which makes them lighter, stronger, and longer lasting. Fall protection nets are certified for
ANSI and OSHA.
Ordering Information
Net Size
Type Size Material Mesh Mesh Edge Lift Configuration
Line Line
Manila Forged ring each corner
Polypro Loop each corner
(Custom) Polyester Twin bridle with forged ring
Mariner’s Nylon each corner
Cargo Steel

Other Other
(Stock)
12’ X Polypro 8” 5/8” 3/4” Forged ring each corner
Mariner’s
Cargo
(Custom) Wide Long Connecting configuration
Scramble Manila Forged ring each corner
Gangway Polypro Loop each corner
Tie-Down Polyester Tie off lanyard each corner
Heli-Pad Nylon
Climbing Steel
Other Other
(Stock) Polypro (Stock) Sizes The
Safety- 6” Mesh 10’ x 15’ and in Intersection
5’ increments
Fall Nylon up to 40’ x 50’
Protection 4” Mesh
Size Rated Mesh Edge Weight
(lbs) Line Line (lbs)
10’ 3000 5/16” 5/8” 16
(Stock)
12’ 3000 5/16” 3/8” 22
Cargo 12’ 5000 3/8” 3/4” 31
Helicopter
15’ 3000 5/16” 5/8” 34 US
Polypro Patents
15’ 5000 3/8” 3/4” 50
2817263
20’ 3000 5/16” 5/8” 60 3091834
20’ 5000 3/4” 3/4” 88 3091016

P. O. Box #7
4711 S. Hwy. 281
Mineral Wells, Texas 76067
Pedley Nets
Toll-Free: 888-806-0624
Inc. Nets cer
tifie
ANSI & d for:
OSHA
Tel. & Fax: (940) 328-0448 www.PedleyNets.net • e-mail: sales@PedleyNets.net
0104-04 4/25/06 7:43 PM Page 104

104-06

DIPLOMATIC MARINE

HATCH COVER TAPES


HEAVY-DUTY
Hatch Cover Tapes

RAM-NEK (Premium)
GULF SEAL (Standard)

HEAVY-DUTY Marine Tape


helps make steel hatch covers
weathertight under heavy sea conditions. RAM-NEK (Premium) & GULF-SEAL (Standard)
are packaged in STRIPS
• Thick adhesive compound reinforced
with strong woven fiberglass mesh WIDTH/ LENGTH/ STRIPS/ WEIGHT/
CARTON CARTON CARTON CARTON
• Cross-laminated, non-tear poly backing
4.3" (110mm) 120 ft (36 meters) 30 42 lb (19 kilos)
• Designed to prevent or reduce damage
resulting from metal hatch cover leaks 6" (150mm) 120 ft (36 meters) 30 80 lb (36 kilos)

IMPORTANT: Proper care and maintenance of your rubber NOTE: Heavy-Duty Marine tape should not be stored at extremely cold or hot
packings and compression bars is still necessary. Heavy- temperatures. Store in warm area during cold weather, and cool area
Duty Hatch Cover Tape is not meant to replace the primary during hot weather.
sealing system of the hatch cover.

MARITAPE Hatch Cover Tape


MEDIUM STRENGTH Sealant Tape for use
in moderate sea conditions only. Suitable for barge
hatch covers, ships’ hatch covers (except during heavy
weather), tank covers, weather deck doors, and to protect
metal pipes from cathodic and corrosion conditions.
• Sticky adhesive compound is a special blend of
high performance polymers
• Cross laminated, non-tear poly backing
• Remains sticky and flexible in cold conditions

MARITAPE is packaged in ROLLS

WIDTH/CARTON LENGTH/CARTON ROLLS/CARTON WEIGHT/CARTON


4" (110mm) 200 ft. (61 meters) 4 15 lbs. (7 kilos)
6" (150mm) 200 ft.. (61 meters) 4 23 lbs. (11 kilos)
NOTE: Marine tape should not be stored at extremely cold or hot temperatures.
Store in warm area during cold weather, and cool area during hot weather.

Henry Company, Diplomatic Marine Division


MARITAPE® MEDIUM DUTY RAM-NEK® and GULF-SEAL®
HATCH COVER TAPE HEAVY-DUTY MARINE TAPE
U.S.A. Phone: (713) 676-2400 • Fax: (713) 673-5805 • U.K. Phone: 44-1983-882-880 • Fax: 44-1983-883-445
E-Mail: info@ramnek.com • Website: www.ramnek.com
0106-03 4/27/06 4:38 PM Page 1

105-06

DIPLOMATIC MARINE

FLEXIBLE GASKET-TYPE
SEALANT
FOR COAMING JOINTS
For protection from water seepage
in difficult to tape areas around hatch
covers such as places where bolts, APPLICATION
chains, wheels, etc. make tape
application difficult • Remove all dust, dirt and rust from the coaming table
and make sure surface is dry.
• Apply 75mm wide cloth duct tape to the area where
USAGE Flexible Gasket-type Sealant will be placed
• Position coil, white side up, do not overlap! Place new
Flexible, Gasket-type Sealant coils are composed of coil flush against laid coil so there are no gaps.
an adhesive and equipped with a non-release film for • Close and secure hatch as usual. Flexible Gasket-
ease of application. type Sealant should “squeeze out” as the side plate
presses down (See illustration)
Coaming joints may be difficult to seal against water • Product can be easily removed by pulling up the cloth
seepage with the use of tape only. Even if properly duct tape with your hand. Residue can be removed
maintained, hatch cover leakage can occur – most often with any degreaser
in cross joints, less often in peripheral joints (See
illustration). Flexible Gasket-type Sealant coils were IMPORTANT: Proper care and maintenance of your rubber packings
designed to be positioned under the side plate of the and compression bars is still necessary. Heavy-Duty Hatch Cover Tape
hatch cover (the side closest to the coaming table) before is not meant to replace the primary sealing system of the hatch cover.
the hatch is closed. This product applies quickly and
easily and can more effectively seal the coaming joint.

PACKAGING
KOAMING-AIDE is packaged in COILS
THICKNESS/WIDTH LENGTH/CARTON COILS/CARTON WEIGHT/CARTON
10mm x 20mm 330 ft (100 meters) 10 60 lb (27 kilos)
20mm x 40mm 100 ft (30 meters) 6 80 lb (36 kilos)
NOTE: Read the instructions and diagrams before installing Flexible Gasket-Type Sealant. It is not meant to make coaming joints airtight.

Henry Company, Diplomatic Marine Division


KOAMING-AIDE® FLEXIBLE, GASKET-TYPE SEALANT
U.S.A. Phone: (713) 676-2400 • Fax: (713) 673-5805 • U.K. Phone: 44-1983-882-880 • Fax: 44-1983-883-445
E-Mail: info@ramnek.com • Website: www.ramnek.com
3036 4/27/06 4:43 PM Page 1

106-06

ALL SET MARINE LASHING AB


CARGO SECURING EQUIPMENT
Semi Auto Twistlocks & Accessories

C5AM-DF C5AM C5AM-HC APB-TQ-2.9


SAT with Dual Function SAT with Single Function SAT for Hatch Covers Telescopic Unlocking Pole
213 x 181 x 120 mm; Wt. 6,8 kg 181 x 181 x 120 mm; Wt. 6,7 kg 178 x 181 x 158 mm; Wt. 8,4 kg Operating Range 2-6 High
Min. Breaking Load: Min. Breaking Load: Min. Breaking Load: (9/5'/2.9m to 44'/13.4m) Length
50 M.T. (Tension); 40 M.T. (Shear) 50 M.T. (Tension); 40 M.T. (Shear) 50 M.T. (Tension); 40 M.T. (Shear) Wt. 6,1 kg

Semi Auto Twistlocks & Accessories

E-16 E-17 E-18 C13A


Storage Bin 20' Flatrack for 8 Storage Bins 40' Flatrack for 14 Storage Bins Stacker for 3" Gap
H 725 x W 870 x L 1320 mm H 1091 x W 2438 x L 6058 mm H 1500 x W 2438 x L 12192 mm H 176 x L 181 x W 120 mm
Wt. 170 kg; Max. Load 1,83 M.T. Wt. 1550 kg; Max. Load 18,45 M.T. Wt. 4800 kg; Max. Load 30,48 M.T. Wt. 6,8 kg
Min. Breaking Load:
42 M.T. (Shear); 100 M.T. (Compression)
Midlocks Manual Twistlocks

C19A C5D-LL C44A-LL-45 C44B-LL


Midlock for 3" Gap (on deck) Manual Twistlock, Fixed Base Dove Tail Twistlock, 45 Degrees Weld Down Twistlock
188 x 176 x 95 mm; Wt. 6,3 kg Left Hand Locking H 130; Handle 160 mm; Wt. 6,3 kg H 143 x L 125 x W 150 mm
Min. Breaking Load: 40 M.T. (Tension) H 178 mm; Hndl 176 mm; Wt. 5,5 kg Min. Breaking Load: Wt. 7,1 kg
Min. Breaking Load: 40 M.T. (Tension or Shear) Breaking Load:
50 M.T. (Tension); 40 M.T. (Shear) 40 M.T. (Tension); 42 M.T. (Shear)

Bridgefittings Hanging Stackers

C7 & C7-1 C7-T C16A C12C


Bridgefitting, Tension Bridgefitting, Compression & Tension Hanging Stacker (below deck) Hanging Stacker (below deck)
C7: Adj. Range 179-259 mm H 134 x L 265 x W 85 mm 140 x 130 mm; Wt. 4,2 kg 100 x 127 mm; Wt. 3,7 kg
Cont.Dist. 0-80 mm; Wt. 3,5 kg Wt. 6,85 kg Min. Breaking Load: 42 M.T. (Shear) Min. Breaking Load: 42 M.T. (Shear)
C7-1: Adj. Range 179-290 mm Breaking Load:
Cont. Dist. 0-100 mm; Wt. 4,6 kg 25 M.T. (Tension or Compression)

Distributor in USA:
World leader in lashing BUFFERS USA INC
10180 New Berlin Road
safety and productivity Jacksonville, FL 32226 USA
Tel: +1 904 696 0010
Fax: +1 904 696 0019
P.O. Box 14112 • S-16714 Bromma, Sweden • Tel: +46 8 80 75 70 • Fax: +46 8 80 15 88 • E-mail: info@allset.se • Web: www.allset.se E-mail: sales@buffersusa.com
Web: www.buffersusa.com
3037 4/27/06 4:45 PM Page 1

107-06

ALL SET MARINE LASHING AB


CARGO SECURING EQUIPMENT
Stackers (below deck)

C15A C21A C92A-203 C92B-279


Single Stacker, Intermediate Single Stacker, Bottom Type Double Transversal Stacker Double Longitudinal Stacker
130 x 130 x 12 mm 130 x 130 x 12 mm 333 x 130 x 12 mm 409 x 130 x 12 mm
Weight: 2,8 kg Weight: 2,6 kg Weight: 6,5 kg Weight: 6,9 kg
Min. Breaking Load: 42 M.T. (Shear) Min. Breaking Load: 42 M.T. (Shear) Min. Breaking Load: 42 M.T. (Shear) Min. Breaking Load: 42 M.T. (Shear)
Min. Breaking Load: 40 M.T. (Tension) Min. Breaking Load: 36 M.T. (Tension)
Turnbuckles

M5-50-EXT/J M5-50-EXT/H ELT-55 & ELT-65 FLX5-TB-50


Hook-Jaw, Open Body Hook-Hook, Open Body Equalash Turnbuckle for Two Rods Knob Type, Single Thread
Length (mm): 940 min. - 1410 max. Length (mm): 970 min. - 1440 max. Length (mm): 945 min. - 1445 max. Length (mm): 1080 min. - 1490 max.
Weight: 14,0 kg Weight: 14,0 kg Weight (kg): 17,0 (55), 18,0 (65) Weight: 14,6 kg
Breaking Load: 50 M.T. Breaking Load: 50 M.T. Breaking Load: 55 & 65 M.T. Breaking Load: 50 M.T.

Turnbuckles Extension Rods

M5-50-FLX FLX-EP-50-610 A7F-50-460 A7F-50-610


Knob Type w/ Twin Thread Extension Rod, Knob Type Extension Rod Extension Rod
Length (mm): 1083 min. - 1423 max. 610 mm / 24" Extension 460 mm / 18" Extension 610 mm / 24" Extension
Weight: 15,3 kg Weight: 7,10 kg Weight: 3,80 kg Weight: 4,40 kg
Breaking Load: 50 M.T. Breaking Load: 50 M.T. Breaking Load: 50 M.T. Breaking Load: 50 M.T.

Lashing Bars

FLX-RD-42 A7B-2-36 ELB-C-50 FLX-RD-50


Knob Type w/ Hinged Head Eye Type w/ Fixed Head Eye Type w/ Hinged Head Knob Type w/ Hinged Head
2-4 knobs 2400 mm length – 8,9 kg 2400 mm length – 12,1 kg 4 knobs
2390 mm – 9,75 kg 4700 mm length – 15,8 kg 4700 mm length – 21,3 kg 2500 mm length – 12,2 kg
4975 mm – 18,78 kg Breaking Load: 36 M.T. Breaking Load: 50 M.T. 4700 mm length – 20,9 kg
Breaking Load: 42 M.T. Breaking Load: 50 M.T.

Distributor in USA:
World leader in lashing BUFFERS USA INC
10180 New Berlin Road
safety and productivity Jacksonville, FL 32226 USA
Tel: +1 904 696 0010
Fax: +1 904 696 0019
P.O. Box 14112 • S-16714 Bromma, Sweden • Tel: +46 8 80 75 70 • Fax: +46 8 80 15 88 • E-mail: info@allset.se • Web: www.allset.se E-mail: sales@buffersusa.com
Web: www.buffersusa.com
3038 4/27/06 4:46 PM Page 1

108-06

ALL SET MARINE LASHING AB


CARGO SECURING EQUIPMENT
Fixed Fittings

D98A-110 D98B-203-110 D98D/110 D98TS/110


ISO Deck Socket, Single ISO Deck Socket, Double Transversal Deck Socket w/ Elongated Aperture, Single ISO Deck Socket, Single,
H 110 x L 178 x W 178 mm; Wt. 6,7 kg H 110 x L 178 x W 381 mm; Wt. 13,5 kg H 110 x L 218 x W 178 mm; Wt. 7,9 kg Transversally Sliding
Breaking Load: Breaking Load: Breaking Load: H 110 x L 260 x W 269 mm; Wt. 12,5 kg
50 M.T. (Tension), 42 M.T. (Shear), 50 M.T. (Tension), 42 M.T. (Shear), 50 M.T. (Tension), 42 M.T. (Shear), Breaking Load: 50 M.T. (Tension),
200 M.T. (Compression) 200 M.T. (Compression) 200 M.T. (Compression) 42 M.T. (Shear), 200 M.T. (Compression)
Fixed Fittings

D98BS-110 D6A D6B-203 D5A-FF


ISO Deck Socket, Single, Flush ISO Socket, Single Flush ISO Socket, Double Dove Tail Twistlock Frame, Single
Longitudinally Sliding Dia. 190 x H 95 mm; Wt. 9,1 kg L 393 x W 190 x H 95 mm; Wt. 20,2 kg H 40 x L 170 x W 260 mm; Wt. 6,95 kg
H 110 x L 260 x W 269 mm; Wt. 12,5 kg Min. Breaking Load: Min. Breaking Load: Breaking Load:
Breaking Load: 50 M.T. (Tension), 50 M.T. (Tension); 42 M.T. (Shear) 50 M.T. (Tension); 42 M.T. (Shear) 40 M.T. (Tension), 42 M.T. (Shear),
42 M.T. (Shear), 200 M.T. (Compression) 200 M.T. (Compression)

Fixed Fittings

D5B-203 LEX-1 LEX-2-203 LEX-3


Dove Tail Twistlock Frame, Double Lashing Eye, Single Lashing Eye, Double Lashing Eye, Triple
L 463 x W 170 x H 40 mm; Wt. 10,2 kg H 105 x L 150 x W 28 mm H 105 x L 353 x W 28 mm H 105 x L 350 x W 28 mm
Distance between centers: 203 mm Wt. 1,80 kg Wt. 4,0 kg Wt. 5,1 kg
Min. Breaking Load: Breaking Load: 65 M.T. (Tension) Breaking Load: 65 M.T. (Tension) Breaking Load: 65 M.T. (Tension)
40 M.T. (Tension); 42 M.T. (Shear)

Fixed Fittings

HLE-1 D3A-25-50 CS4 PCW-4


Hinged Eye Plate D-Ring with Strap Lateral Support Positioning Cone, Single, Weld Type
L150 x H 85; Wt. 8,8 kg Ring: W 230 x H 140 mm L 320-410 mm; Wt. 27 kg L 100 x W 54 x H 75 mm; Wt. 3,0 kg
Min. Breaking Load: 50 M.T. Strap: W 119 mm Min. Breaking Load: Min. Breaking Load:
Wt: 4,4 kg 42 M.T. (Tension/Compression) 42 M.T. (Shear)
Min. Breaking Load: 50 M.T.

Distributor in USA:
World leader in lashing BUFFERS USA INC
10180 New Berlin Road
safety and productivity Jacksonville, FL 32226 USA
Tel: +1 904 696 0010
Fax: +1 904 696 0019
P.O. Box 14112 • S-16714 Bromma, Sweden • Tel: +46 8 80 75 70 • Fax: +46 8 80 15 88 • E-mail: info@allset.se • Web: www.allset.se E-mail: sales@buffersusa.com
Web: www.buffersusa.com
108 4/25/06 7:51 PM Page 1

109-06

THE KIRKPATRICK GROUP, INC.


Cable Lubricators/Cleaners
These systems are designed so that, in only one application, wire rope can have its surface and grooves
scraped clean of product build-up and grit. At the same time, any new lubricant is uniformly applied to the
newly cleaned surface and injected to its very core. Moisture trapped in the internal strands is forced out
and replaced with the new lubricant. All systems are compatible with low as well as high viscosity
lubricants.
Each system comes complete with one diameter seal and scraper plate kit, a matching diameter and lay
groove cleaner kit, and the required components necessary to commence immediate operation. THE
CUSTOMER MUST SPECIFY THE DIAMETER AND LAY OF THE WIRE ROPE WHEN PLACING ORDER.
Each diameter wire rope requires a corresponding diameter seal and scraper plate kit. Seal and scraper
plate kits are easily inserted and removed from the lubrication collar to allow a different diameter seal and
scraper plate kit to be quickly inserted as required. The same format is followed in changing groove
cleaner kit diameters, except the customer must also communicate the lay required in conjunction with the
groove cleaner’s diameter. The customer should order additional diameter seal kits along with diameter
and lay groove cleaner kits to cover their maintenance requirements.
Important Reminder: THE CUSTOMER SHOULD ORDER ADDITIONAL DIAMETER SEAL KITS AND
ADDITIONAL DIAMETER AND LAY GROOVE CLEANER KITS TO MATCH ANY OTHER WIRE ROPE
DIAMETERS AND CONFIGURATIONS SHIPBOARD. PLEASE REMEMBER THIS IMPORTANT POINT
WHEN ORDERING THROUGH A RESELLER WHO IS NOT FAMILIAR WITH THE PRODUCT LINE.
The user provides the air source and enough lubricant to accomplish the task at hand. Recommended air
pressure settings for various wire rope travel speeds in conjunction with lubricant viscosities are provided
in the operating/parts manual, which accompanies each system.
There are three different systems offered: Standard, Jumbo & Jumbo Jumbo Internal Spray Models
Internal Spray. All systems are provided with all accessories necessary to
begin immediate operation. The customer provides the air supply unit. (Light Oil Weight Applications, 90 weight oil & thinner)
Seal & Scraper Plate Kits for wire rope from
Standard System Models 3/8” (9mm) to 2-1/4” (57/58mm)
For 1/4" (5mm) to 1-7/8" (48mm) wire rope / seal kit diameters
JU5L – High Pressure Internal Spray System for use with sprayable
SU35B – For low & high viscosity lubricants in 5-gallon (35 lb./16 Kg)
light viscosity coatings. Fit for 5-gallon pails.
pails. 50:1 ratio pump package. Flow rate per minute NLGI Grade 1
@ 70 psi = 72 ounces (2 Kg). JU16L – High Pressure Internal Spray System for use with sprayable
U.S. Government / NATO NSN: 4930-01-424-2197. light viscosity coatings. Fit for 16-gallon kegs.
SU120 – Same operational specifications as the Model SU35B, JU55L – High Pressure Internal Spray System for use with sprayable
except that the pumping system is configured to fit 16-gallon light viscosity coatings. Fit for 55-gallon kegs.
(120 lb./54 Kg) drums. U.S. Gov. / NATO: 4930-01-462-6338.
Accessories
SU400 – Same operational specifications as the Model SU35B & GROOVE CLEANER KITS – Each kit is supplied with two individual
SU120, except that the pumping system is configured to fit 55-gallon groove cleaners. Groove cleaners function to clean the groove pattern
(400 lb./181 Kg) drums. and outer circumference of the wire rope as it enters the lubrication
collar, providing maximum penetration and coating levels in the
Jumbo System Models pressurized lubrication chamber. Customer must specify the diameter,
For 3/8" (9mm) to 3-7/8" (98mm) wire rope / seal kit diameters lay and number of outer strands of their rope when ordering.
(Do not choose a Jumbo System if you do not have a wire rope MANUAL STRIPPER – Acts as a rotational base for groovers separate
diameter larger than 1-7/8” (48mm). from the lubrication collar if required. Utilized when user would like to
Note: If your perferred wire rope lubricant is a light weight oil product, we clean the wire rope for inspection purposes. Example: Inspection of
recommend that you consider one of the internal spray systems for larger wire rope rope to determine if condition warrants replacement.
diameters. See Internal Spray Models, second column.
DYNAGARD BLUE – Environmentally friendly mineral oil-based product.
JU5 – For medium to high viscosity wire rope lubricants supplied in Available in 5, 16, and 55 gallon containers. Blended for optimum
5-gallon (35 lb./16 Kg) pails. 50:1 ratio pump package: Flow rate coating and penetration when used with the above wire rope lubrication
NLGI Grade 1 viscosity @ 80 psi = 18 lbs. (8 Kg) per minute. systems. Over 25,000 PPM LC-50 Bioaquatic performance test levels
(Mysidopsis bahia). Approved by U.S. Coast Guard, U.S. Navy, Canadian
JU120 – For medium to high viscosity lubricants supplied in Navy. U.S. Government / NATO NSN: 9150-01-520-8116.
16-gallon (120 lb./54 Kg) drums. 50:1 ratio pump package: Flow rate
NLGI Grade 1 viscosity @ 80 psi = 18 lbs. (8 Kg) per minute. DYNAGARD "E" – Environmentally safe seed oil-based grease. 97%
Biodegradable, with over 21,000 PPM LC-50 Bioaquatic performance
U.S. Government / NATO NSN: 4930-01-319-0787 / U.S. Navy AEL:
test levels (Mysidopsis bahia). Protective performance matches
2-92001477 petroleum-based products. Blended for optimum coating and
JU400 – For medium to high viscosity lubricants supplied in 55-gallon penetration levels when used with the above wire rope lubrication
(400 lb./181 Kg) drums. 50:1 ratio pump package: Flow rate NLGI systems. Approved by U.S. Coast Guard, U.S. Navy, Canadian Navy.
U.S. Government / NATO NSN: 9150-01-520-8143.
Grade 1 viscosity @ 80 psi = 18 lbs. (8 Kg) per minute.
Manufactured by :
WIRE ROPE LUBRICATION SYSTEM The Kirkpatrick Group, Inc.
When you purchase our product, you are purchasing a system 701 East 15th St., Suite 101
with a proven track record supported by a data base of Plano, TX 75074 USA
information concerning wire rope maintenance accumulated over Tel: (800) 466-4414, (972) 509-2468
Fax: (972) 509-2554
the 24 years our company has been in operation. This type E-mail: TKG-Sales@thekirkpatrickgroup.com
of product support comes only with experience! www.thekirkpatrickgroup.com
0108-03 4/25/06 7:51 PM Page 108

110-06

Wire Rope - 6 x 19 Class and 6 x 37 Class


Fiber Core or I.W.R.C. (Single Operation Strand)

6 x 19 Class 6 x 37 Class Rope Nominal Breaking Strength in Lbs. Approx. Weight


Dia. IPS EIPS EEIPS Lbs./Ft.
(in.) FC IWRC IWRC IWRC FC IWRC
1/4 5,480 5,880 6,800 7,480 0.105 0.116
5/16 8,520 9,160 10,540 11,590 0.164 0.18
6xS(19) 6xS(19) 6xFi(29) 6xFi(29) 3/8 12,200 13,120 15,100 16,600 0.236 0.26
+FC +IWRC +FC +IWRC 7/16 16,540 17,780 20,400 22,400 0.32 0.35
1/2 21,400 23,000 26,600 29,200 0.42 0.46
9/16 27,000 29,000 33,600 37,000 0.53 0.59
5/8 33,400 35,800 41,200 45,400 0.66 0.72
3/4 47,600 51,200 58,800 64,600 0.95 1.04
6xFS(19) 6xW(19) 6xWS(31) 6xWS(31) 7/8 64,400 69,200 79,600 87,600 1.29 1.42
+IWRC +IWRC +FC +IWRC 1 83,600 89,800 103,400 115,000 1.68 1.85
1-1/8 105,200 113,000 130,000 143,000 2.13 2.34
1-1/4 129,200 138,800 159,800 175,000 2.63 2.89
1-3/8 155,400 167,000 192,000 212,000 3.18 3.50
1-1/2 184,000 197,800 228,000 250,000 3.78 4.16
6xFi(21) 6xFi(21) 6xWS(36) 6xWS(36) 1-5/8 214,000 230,000 264,000 290,000 4.44 4.88
+FC +IWRC +FC +IWRC 1-3/4 248,000 266,000 306,000 336,000 5.15 5.67
1-7/8 282,000 304,000 348,000 382,000 5.91 6.50
2 320,000 344,000 396,000 436,000 6.72 7.39
2-1/8 358,000 384,000 442,000 486,000 7.59 8.35
2-1/4 400,000 430,000 494,000 544,000 8.51 9.36
2-1/2 488,000 524,000 604,000 664,000 10.5 11.6
6xFi(25) 6xFi(25) 6xSeS(37) 6xSeS(37)
+FC +IWRC +FC +IWRC 2-3/4 584,000 628,000 722,000 794,000 12.7 14.0
3 685,000 740,000 850,000 935,000 15.1 16.6
3-1/4 798,000 858,000 984,000 1,082,000 17.7 19.5

Rope Nominal Breaking Approx.


6xWs(26) 6xWs(26) 6xWs(41) 6xWs(41) Diam. Strength in lbs. Weight
+FC +IWRC +FC +IWRC (inches) IPS Lbs./Ft.
3/8 9,540 0.194
1/2 16,800 0.35
5/8 26,000 0.54
3/4 37,200 0.78
Galvanized Marine Cables 13/16 43,600 0.91
6 x 24 Class 7/8 50,400 1.06
1 65,600 1.38
7 Fiber Core 1-1/16 73,800 1.56
1-1/8 82,400 1.75
1-3/16 91,800 1.95
1-1/4 101,400 2.16
1-3/8 122,000 2.61
1-7/16 133,000 2.85
1-1/2 144,600 3.11
1-5/8 169,000 3.64
1-11/16 181,800 3.93
1-3/4 195,000 4.23
1-13/16 208,000 4.53
1-15/16 238,000 5.18
2 252,000 5.52
2-1/16 268,000 5.87

Complete Inventories of Wire Rope, ATLANTIC CORDAGE CORP.


Fiber Rope (Natural & Synthetic) and Rigging Hardware 35 Mileed Way, P.O. Box 30 • Avenel, NJ 07001-0030
Mechanical Splicing of Wire Rope up to 5” Diameter Tel: (732) 574-0700 • Fax: (732) 574-9191
E-Mail: sales@atlantic-group.com
Contact us for a FREE Product Catalog Web Site: http://www.atlantic-group.com
0107-05 4/27/06 4:48 PM Page 1

111-06

Wire Rope Slings


Slings are available with Standard
Soft Eyes or with Heavy Duty
Thimbles in either or both eyes.
W
They are mechanically spliced with
swaged ferrules. L
Length of Sling (SL)

RATED CAPACITIES IN TONS (2000 lbs.) 5 to 1 Design Factor From the Horizontal
EIP IWRC RRL PREFORMED WIRE ROPE

Rope Min.
Diameter Length W L Choker Vertical ▲ ▲ ▲
(in.) (SL) (in.) (in.) Hitch Hitch 60° Basket 45° Basket 30° Basket
(ft. - in.)

1/4 1-6 2 4 .48 .65 1.1 .92 .65


3/8 2 3 6 1.1 1.4 2.4 2.0 1.4
1/2 2-6 4 8 1.9 2.5 4.3 3.5 2.5
5/8 3 5 10 2.9 3.9 6.8 5.5 3.9
3/4 3-6 6 12 4.1 5.6 9.7 7.9 5.6
7/8 4 7 14 5.6 7.6 13 11 7.6
1 4-6 8 16 7.2 9.8 17 14 9.8
1-1/8 5 9 18 9.1 12 21 17 12
1-1/4 5-6 10 20 11 15 26 21 15
1-3/8 6 11 22 13 18 31 25 18
1-1/2 7 12 24 16 21 36 30 21
1-3/4 8 14 28 21 28 48 40 28
2 9 16 32 28 37 64 52 37
2-1/4 10 18 36 35 44 76 62 44
2-1/2 11 20 40 42 54 94 76 54
2-3/4 12 22 44 51 65 113 92 65
3 13 24 48 60 77 133 109 77
3-1/2 16-6 32 64 79 102 177 144 102
3-3/4 18 36 72 90 115 199 163 115
4 20 40 80 101 130 225 184 130
4-1/2 24 50 100 124 160 277 226 160

4 Strand Wire Rope with Fibre Core


35LS Wire Rope Non-rotating • Resists deformation • Long fatigue life
35 x 7 Class Recommended for high altitude cranes
Minimum Breaking Load Minimal Breaking Load in Metric Tons
Rope Dia. Approx. Mass Rope Dia.
Rope Grade F4 x SeS(39)+FC Approx.
WSC
1960 2160 165kg/mm2 180kg/mm2 195kg/mm2 Weight
mm in.
in. mm lb/ft. kg/ft. tons kN tons kN (1820N/m2) (1770N/m2) (1910N/m2) kg/m
1/2 0.49 0.22 13.5 120.0 15.2 135.0 11.2 7/16 7.53 8.21 8.90 0.516
13 0.51 0.23 14.3 127.0 16.3 145.0 35LS 35 x 7
12.0 8.64 9.43 10.2 0.592
14 0.59 0.26 16.5 147.0 18.8 167.0 12.6 1/2 9.53 10.4 11.3 0.653
9/16 0.62 0.27 17.2 153.0 19.3 172.0 14.0 11.8 12.8 13.9 0.806
5/8 16 0.77 0.34 21.7 193.0 24.7 220.0 16.0 5/8 15.4 16.8 18.2 1.053
18 0.97 0.44 27.1 241.0 30.9 275.0 18.0 19.4 21.2 23.0 1.333
3/4 19 1.11 0.50 30.9 275.0 34.8 310.0 19.0 3/4 21.7 23.6 25.6 1.485
20 1.21 0.55 33.6 299.0 37.7 335.0 20.0 24.0 26.2 28.4 1.645
22 1.49 0.68 41.4 368.0 46.1 410.0 22.4 7/8 30.1 32.8 35.6 2.064
7/8 1.51 0.69 41.4 369.0 46.4 413.0 24.0 34.6 37.7 40.9 2.369
24 1.77 0.80 49.3 439.0 55.6 495.0 26.0 40.6 44.3 47.9 2.781
1 1.97 0.87 54.4 484.0 60.9 542.0 28.0 47.0 51.3 55.6 3.225
26 2.08 0.94 57.8 514.0 65.0 578.0 32.0 1-1/4 61.5 67.0 72.6 4.212
28 2.41 1.09 67.0 596.0 76.1 677.0 35.0 1-3/8 73.5 80.2 86.9 5.039
4 Strand
1-1/8 2.50 1.10 68.6 610.0 76.8 683.0 36.0 77.8 84.8 91.9 5.331
1-1/4 32 3.08 1.36 86.0 765.0 96.8 861.0

Complete inventories of Wire Rope,


Fiber Rope (Natural & Synthetic) and Rigging Hardware
ATLANTIC CORDAGE CORP.
35 Mileed Way, P.O. Box 30 • Avenel, NJ 07001-0030
Rope Assemblies to Meet Your Most Exacting Specifications Tel: (732) 574-0700 • Fax: (732) 574-9191
Other constructions and sizes of Endurance® 35LS ropes available E-Mail: sales@atlantic-group.com
Contact us for a FREE Product Catalog Web Site: http://www.atlantic-group.com
0110-03 4/25/06 7:54 PM Page 110

112-06

MORSE-STARRETT PRODUCTS CO.


IMPACT TYPE WIRE ROPE CUTTERS
Striking with a hammer actuates these cutters; they cut with only a
few hammer blows. They are precision engineered to deliver a clean
cut without affecting the original roundness of the wire rope. The
blades and dies are made of tool steel, heat treated and ground to
close tolerances.
MODEL 1 MODEL 1A MODEL 2 2
DESCRIPTION LIGHT-DUTY HEAVY-DUTY EX. HEAVY-DUTY
Part No. Net Wt. Part No. Net Wt. Part No. Net Wt.
Cutter Complete 101 7 lbs. 121 17 lbs. 131 28 lbs.
Casting Base 102 4 lbs. 122 12 lbs. 132 21 lbs.
Plunger 103 3 lbs. 123 4 lbs. 133 7 lbs.
Die (Set) 104 4 oz. 124 7 oz. 134 10 oz.
1
Blade (With Pin) 105 2 oz. 125 2 oz. 135 5 oz.
Blade Pin Only 106 1 oz. 126 1 oz. 136 1 oz.
Plunger Guide Pin Only 107 1 oz. 127 1 oz. 137 1 oz.
Guard 108 1 oz. 128 2 oz. 138 3 oz. 1A
Warning Decals 109 129 139

MANUALLY OPERATED WIRE ROPE CUTTERS


These self-contained hydraulic cable cutters are precision-engineered
tools designed to give a clean cut with minimal effort. Just pump the
handle...no outside power is required. This self-contained portable
tool can be easily carried. All three models will operate under water.
C 1750 The blades and die sets are made of tool steel, heat treated and
ground to close tolerances.

MODEL MAX. CAPACITY DIMENSIONS WEIGHT


W 075 3/4” Wire Rope 12” x 3-1/2” x 6” high 21 lbs.
W 075 P 1125 P 1125 1-1/8” Wire Rope 14” x 4” x 7” high 34 lbs.
C 1750 1-3/4” Wire Rope 19” x 5” x 8” high 66 lbs.

POWER OPERATED WIRE ROPE CUTTERS


These cutters require an external hydraulic power source for
operation. They can be activated by any electric, gasoline, hand,
battery or air operated hydraulic pump capable of developing
10,000 PSI and having free flow return through the pressure line.
The pumps are hose-connected to the body of the cutter. POC 3500-80
POC 1125-80

MODEL MAX. CAPACITY DIMENSIONS WEIGHT


POC 1125-80 1-1/8” Wire Rope 9-3/8” x 4-5/8” x 7-3/4” high 21 lbs.
POC 1750-80 1-3/4” Wire Rope 12” x 5-3/4” x 9” high 49 lbs. POC 2500-80
POC 2500-80 2-1/2” Wire Rope 17-1/2” x 6-1/4” x 7-1/2” high 82 lbs. POC 1750-80
POC 3500-80 3-1/2” Wire Rope 60” x 18” x 23” high 500 lbs.*
*The POC 3500-80 is sold only as a complete unit

MORSE-STARRETT PRODUCTS CO.


184 Northwest Tenth Street – Meridian, ID 83642
Tel: (208) 888-7571 • Fax: (208) 888-2092
E-mail: sales@morse-starrett.com • Internet: www.morse-starrett.com
0111-04 4/25/06 7:55 PM Page 111

113-06

ELISHA WEBB & SON CO.

POWER MEGAPHONES
Weatherproof Audio Hailer #S-168M
NSN 5830-01-073-5587
Uses 12 “C” Batteries
MIL SPEC Hazardous Location Safe Hailer #S-245
BRONZE BELLS U.L. listed - No. 808X PORTABLE MECHANICAL
Plain or Polished Uses 12 “C” batteries
Engraving available FOGHORN – Rotary Type
(Please Specify Engraving) Portable Mechanical Foghorn as
Diameter Weight required by the U.S. Coast Guard.
(in.) (mm) (lbs.) Heavily constructed wooden box;
4 100 3 heavy brass horn and handle.
5 125 4 Produces a sound which can be
6 150 6 heard many miles away. Simple to
7 175 9 operate; always ready for use.
8 200 14 21-1/2” long, 8” wide, 14-3/4” high.
9 230 20
Weight: 23 lbs.
10 250 27
12 300 40
14 350 65
16 400 70 BRONZE MIL SPEC GONGS
18 460 123 BELLS F-957
20 500 170 12” and 14” Cylindrical 18” x 18”
Weight: 30 lbs. Stainless Steel
and 39 lbs. Weight: 85 lbs.

SPLICING
VISES

PORTABLE
MECHANICAL FOGHORN
Plunger Type
Meets U.S.C.G. Specifications.
#1200 #900 Made of galvanized steel and painted
Aluminum Alloy Frame & Jaws For use in forming strong slings. grey. Replacement reed included.
Steel Screws Meets Fed. Spec. #GGG-V-412A Overall Height: 23.6”
Wire Rope Capacity: 1/8” to 5/8” Wire Rope Capacity: 3/8” to 1-1/2” Diameter: 7-7/8”, Base: 9.8” x 9.8”
Rope Capacity: Up to 1” Manila Base Dimensions: 19-1/2” x 19-1/2” Weight: 13.5 lbs.
Base Dimensions: 8-1/2” x 11-1/2” Weight: 70 lbs.
Weight: 3 lbs.

Anchors – Boat Hook Poles


Cargo Nets – Chain – Chocks
Elisha Webb & Son Company Crosby Group
Norton Abrasives
Cleats – Navigation Lights Marine Supplies Since 1894 Perko
Mastercard
Rope – Slings – Splicing 4238 Adams Ave., Philadelphia, PA 19124 Visa Samson Cordage
Safety Products – Wire Rope Call (215) 535-BOAT (2628) • Fax (215) 535-8505 Discover
Wilcox Crittenden
E-Mail: eliweb@aol.com • www.elishawebb.com
0112-03 4/27/06 4:52 PM Page 1

114-06

KEPNER PLASTICS FABRICATORS, INC.


“Compactiguy”
not included.
OIL SPILL RESPONSE
BOOMS
Compactible are unsinkable, self-inflating boom systems
that compact to a fraction of their operating volume for
storage in barrels, boxes, etc.
Float diam. – in. (cm) 8 (20) 11 (28) 14 (36) 18 (46) 24 (61)
Skirt Length – in. (cm) 12 (30.5) 15 (38.1) 16 (40.6) 23 (58.4) 36 (91.4)
Weight – lbs/ft (kg/m) 1.7 (2.5) 2.7 (4) 3.4 (5.1) 4.5 (6.7) 6.5 (9.7)

Up to 164’ of 8” float diameter Compactible ReelPak™ are completely corrosion resistant, unsinkable, SELF-INFLATING,
Harbor Boom Systems fit in a barrel self-inflating and self-compacting, reelable boom systems E-Z FLO™
AIR VENTS
COMPARTMENTED SELF-COMPACTING
FLOAT SECTIONS OPERATION
that do not require pumps, valves, or blowers, etc. DOUBLE WALL
CONSTRUCTION

Float diam. – in. (cm) 8 (20) 11 (28) 14 (36) 18 (46) 24 (61)


Skirt Length – in. (cm) 12 (30.5) 15 (38.1) 16 (40.6) 23 (58.4) 30 (76.2)
Weight – lbs/ft (kg/m) 2.0 (3) 3.0 (4.5) 4.0 (6) 5.7 (8.5) 8.5 (12.7) PERMANENT
CLOSED CELL
FLOTATION

TANKS BALLAST-
TENSION
CONTINUOUS SS COIL
MAINTAINS CONSTANT 100% POLYURETHANE
COATED FABRIC
MEMBER FREEBOARD EVEN IF
Pillow tanks are horizontally flat, rectangular, BOOM IS DAMAGED
reinforced storage tanks, with fill/drain connections
8” Harbor to 32” High-seas float diameter
and handles/tie-downs where needed.
Reelable Boom Systems
Cap. - gal.(£) Overall Size (full) - ft. (m) Shipping Wt. - lbs. (kg)
100 (378) 3 x 4.5 x 1.5 (.9 x 1.4 x .5) 20 (9)
300 (1,134) 4x9x2 (1.2 x 2.7 x .6) 40 (18)
1,000 (3,780) 8 x 10 x 2 (2.4 x 3 x 6) 75 (34)
100 to 100,000 Gal. Capacity Pillow Tank 5,000 (18,900) 13.5 x 17.5 x 3.5 (4.1 x 5.3 x 1) 200 (91)
10,000 (37,800) 20 x 20 x 4 (6.1 x 6.1 x 1.2) 300 (136)

Towable tanks are tapered cylindrical tanks, specifically


designed for filling, draining and towing in a marine
environment. Tow Stabilizer accessory also shown here.
Cap. - gal.(£) Overall Diam. x Lgth (full) - ft. (m) Dry Wt. - lbs. (kg)
600 (2,268) 3 x 15 (.9 x 4.6) 100 (45)
1,200 (4,536) 3 x 26 (.9 x 8) 200 (90)
2,500 (9,450) 4 x 31 (1.2 x 9.5) 300 (135)
5,000 (18,900) 6.5 x 54 (2 x 16.5) 450 (200)
10,000 (37,800) 8 x 61 (2.5 x 18.6) 500 (225) 2,500 Gal. Capacity Stand-alone Tank
Diameter Height Weight
1,000 to 20,000 Gal. capacity Towable Tank 9.5’ (2.9m) 61” (1.5m) 132 lbs (60 kg)
SKIMMERS
Self-propelled harbor and light ocean skimmers have
basin capacity of 25 barrels and can skim at speeds up
to 5 knots in chop up to 3’. 2 man operating system
packs into 20’ shipping container.
Operating Configuration as shown
O.A. Length O.A.Width Draft Approx. Weight
31’ (9.5m) 12’ (3.7m) 24” (61 cm) 4,000# (1,820kg)

All-purpose skimmer is an extremely versatile and


rugged, lightweight, suction skimmer for high-volume oil
recovery, requiring only shallow draft. All types of oils
can be collected over the three, screened, self-adjusting Up to 330 GPM All-purpose Skimmer
weir doors.
Up to 700 GPM Self-propelled Skimmer
Operating Configuration of Skimmer Body
O.A. Length O.A.Width Draft Weight
37” (94cm) 43” (109cm) 6” (15 cm) 79# (36kg)

Serving you through Distributors


Harbor & Offshore Products with offices world-wide:
for over 40 years! North America Asia
3131 Lomita Blvd., Torrance, CA 90505 USA
South America Africa
TEL: 310/325-3162 FAX: 310/326-8560 “When it has to work!” Europe Australia
www.kepnerplastics.com info@kepnerplastics.com
113 4/25/06 7:57 PM Page 113

115-06

SORBENT PRODUCTS CO., INC.


OIL ONLY SORBENTS OIL SPILL KITS
For use on petroleum based liquids 55 Gallon Drum
For medium spill response
SPC Oil Sorbents for clean up and removal of oil where (Absorbs 38 gallons.)
mechanical equipment is not practical. Lever-locked 55 gallon drum
meets UN specifications.
ENV Oil Sorbents are contractor grade, oil only sorbents
ideal for environmental applications.
95 Gallon Overpack
For larger spill response
• Convenient and (Absorbs 75 gallons.)
lightweight. Screw-topped overpack drum
meets UN and DOT
• Absorb oils, oil
specifications.
based paints,
vegetable oils DESCRIPTION 55 Gal. Drum 95 Gal. Overpack
and many more For Oil Only Model SKO-55 Model SKO-95
oil based chemicals. For All Liquids Model SKA-55 Model SKA-95
For Hazardous Liquids Model SKH-55 Model SKH-95
KIT CONTENTS
Pads – 15" x 19" 50 110
SOCs – 3" x 4' – 12
SOCs – 3" x 12' 4 8
Pillows – 18" x 18" 8 8
Goggles 1 Pair 1 Pair
Nitrile Gloves 1 Pair 1 Pair
Disposal Bags 5 10
Emergency Response
Handbook 1 1

BOOMS
SPILL RESPONSE KITS
Economy Spill Kit
Absorbs up to 5 gallons.
Highly visible yellow PVC bag.
Contents: 10 pads, 15" x 19"
PADS ROLLS 2 SOCs, 3" x 4'
Nitrile Gloves
1 Disposal Bag
Description Dimensions Type Absorb Packaging Instruction Sheet
SPC OIL SORBENTS Part No. Description
SPC100 Pad 15" x 19" Oil only 31 100 pads/bale SKA-PP For all liquid spills
SPC200 Pad 15" x 19" Oil only 32 200 pads/bale Attack Pack
SPC300 Pad 15" x 19" Oil only 24 100 pads/bale Single use kit packed in puncture
SPC150 Roll 38" x 144' Oil only 70 1 roll/bale resistant foil bag. Grommet for
SPC152 Roll 19" x 144' Oil only 70 2 rolls/bale hanging. Absorbs up to 7 gallons.
SPC810 Boom 8" x 10' Oil only 71 4 booms/bale Contents: 15 pads, 15" x 19"
SPC510 Boom 5" x 10' Oil only 32 4 booms/bale 3 SOCs, 3" x 4'
Goggles
ENV OIL SORBENTS
Nitrile Gloves
ENV100 Pad 15" x 19" Oil only 28 100 pads/bale 1 Disposal Bag
ENV200 Pad 15" x 19" Oil only 32 200 pads/bale
Part No. Description
ENV300 Pad 15" x 19" Oil only 24 100 pads/bale
SKO-ATK For oil and petroleum spills, 4/case
ENV810 Boom 8" x 10' Oil only 65 4 booms/bale SKA-ATK For all liquid spills, 4/case
ENV150 Roll 38" x 144' Oil only 54 1 roll/bale SKH-ATK For hazardous material spills, 4/case
ATKRO1 Attack Pack Rack holds a single pack

For the best and U.S. & Canada Europe Asia


most complete line of Tel: +1 (800) 333-7672 +32 (14) 321855 +852 2151 1393
sorbents, see our ad in Fax: +1 (732) 302-0969 +32 (14) 320440 +852 3579 5799
the Advertising Section Website: www.sorbentproducts.com
or call: E-mail: info@sorbentproducts.com
114 4/25/06 8:02 PM Page 1

116-06

JULIAN A. MCDERMOTT CORPORATION

A38-ESU A38-ANC RECHARGEABLE HANDLIGHTS


A38-ESU-H7635-S-ST - Single head, 160,000 CP lamp with shoulder strap. Unit can be
recharged from a vehicle charger (12VAC) or a wall charger.
A38-ANC - (dry battery) and A38-ANCR (rechargeable) handlights with clevis-mounted
head. Available in spot or flood (specify).
EXAFL
A25 DRY CELL HANDLIGHTS
A25-H7550 - Halogen spotlight with an adjustable head. Use NEDA 908 battery.
EXAFL-1-BR - Case is molded of red fiberfilled ABS polycarbonate material (explosion
proof). Operates on 2 NEDA 908 spring batteries. Supplied with or without quick release wall
holding bracket as shown. To order without bracket, delete “BR” suffix.

BATTERY CHARGERS
ACHG-12-4-AJ - High current line of dual-rate chargers. Units equipped with charge and
power on indicators. They are reverse polarity protected and have short circuit protection.
ACHG
Made in 120 or 220 VAC inputs.
VCM
VCM-12-LED - Vehicle Charging Rack. 12 or 120 volt. A steel enclosure with a magnet
which holds handlight in place for recharging. 120 volt model (VCM-120-LED) plated with
anti-rust coating. Used by U.S. Navy.

NAVIGATION LIGHTING
BGANCLT - Expendable anchor light designed for use on barges. Light is visible for more
than one mile. Light has unbreakable lens and uses any 6 volt spring battery (NEDA 908).
Meets all U.S.C.G. Regulations.
BGANCLT BUNYBZ
BUNYBZ - Multi-purpose waterproof light with locking bolt and high-impact shatterproof
lens. Uses one 6 volt battery (NEDA 908). Can be used with bulbs 1317 (high power) or
1850 (low power). Flash rates: 15, 30, or 60 flashes per minute. Red, Green, or Blue filter;
Clear or Amber lens. Specify filter and lens colors when ordering.
BGLEDCASE-SOL - These Barge Lights charge during the day and deliver a brilliant
flashing or steady light throughout the night. Fully waterproof. Available in Certified PORT,
BGLEDCASE-SOL STARBOARD, STERN, and FLASHING AMBER. When ordering specify steady or flashing
operation. Series: BGLEDCASE-SOL-(options)

PLATFORM
PLATFORM LIGHT - Used as obstruction markers, navigation aids, and dock lights.
Lenses can be supplied in Red, Green, Blue, Amber, or Clear and in voltages of 6, 12, 24, 120
or 220. Specify voltage and lens color when ordering.
BUNY-OIL BUNY-OIL - Aids to navigation lights for use on buoys, pilings, or to mark navigational
obstructions. Standard flash rates: 15, 30, or 60 flashes per minute. (Other rates may be
specified). Low intensity has a range of 1 - 2 miles; high intensity has a range of 3 - 5 miles.

ACLW
HELIPAD LIGHTING
ACLW - Low profile design with rechargeable 6 volt 8 amp battery. Has high gain optical
lens, high intensity lamp and internal charger. Case is heavy fiberglass with a carry handle.
EOL
EOL - This obstruction light is used for nighttime obstruction marking. It is usually steady
burning, but may also be flashing if used with an external flasher unit.
SB503 SB503 - Light has a canvas bag which is filled with sand for ballast. Unit has four filters: Red,
Blue, Amber, Green. Operates off one 6 volt spring battery and uses GE Lamp 503.

Anchor Lights JULIAN A. McDERMOTT CORP. Loading Lights


Handlights (800) 842-5708 • www.mcdermottlight.com Vehicle Lights
Dock Lights Chargers
1639 Stephen St., Ridgewood, NY 11385
Buoy Lights Marker Lights
Tel. (718) 456-3606 Fax (718) 381-0229
Barge Lights Solar Lights
** See Our Ad In The Advertising Section **
115 4/25/06 8:03 PM Page 1

117-06

JULIAN A. MCDERMOTT CORPORATION


TOPHAT SOLAR LIGHTS
TOPHAT-BUNY - For mounting directly into a buoy 4" schedule 40 pipe
TOPHAT-PLAT - This is a stand alone for flat mounting on docks, etc.
TOPHAT-FLAT - Flat mount on restricted space such as on a float buoy
FLAT Housing: Polycarbonate Lens: Polycarbonate Batteries: Rechargeable Range: 3 miles
BUNY PLAT Colors Available: Red, Amber, Green, Clear, Blue // Completely Solar Powered
FlashRates: For Red, Amber, Green & Clear: 10, 15, 24, 30 FPM For Red & Amber: 60 FPM

TUGBOAT NAVIGATION L.E.D. LIGHTS


TB2D - Port, Star, Stern or Tow. Available in 12 - 24 and 120 volts. 4" x 4" Mounting.
Lamp Life - 30,000 hours
TB5-MAST-GL35 - Masthead White Light. Incandescent with 225 degree screen.
Available in 12, 24 and 120 volts. Lamp Life - 20,000 hours
TB5-MAST TB2D Add Suffix -P if lights are used on alarm panels.

ARC LIGHTS
ARC-1-FM - This Arc Light has 2 million candlepower and a drain of only 4 amps. Life of
lamps (3000 hours), black lexan heads. Size: 12" x 6" x 7". Weight: 5 lbs. Waterproof.
RACK-ARC-3-FM - This unit has 6 million candlepower and a drain of only 12 amps. Can
RACK-ARC-3 be aimed locally, both horizontal and vertical. Size: 12" x 20" x 7". Weight: 13 lbs.
ARC-1-FM

STROBE/ENGINE ROOM ROTATING LIGHTS


1212-PAN - Engine room rotating lights. Voltages available: 12, 24 - 120 VAC.
Also Strobes (STR Series).
STR-800 FB1-FM FB1-FM - Engine room rotating light. Voltages available: 12, 24, 48 VDC

BUOYS AND BUOY LIGHTS


BUOY-B24-SRC - Light must use a 23" or 31" tube where it is required to be at 2 feet out of
the water. Center Hole is 3-1/2". Has 2 hubs on bottom for tying a rope to a pipe line.
BUOY-B24-SRC Dimensions: 24" x 10" Weight: 20 lbs. Material: Medium density polyethylene. Meets
BUOY-B24
ASTM D4976 Group 2, Class 2, Grade 3

BUOY-B24 - General lighted marker buoys. Light must use a 15" tube.

BUOY-B24-SRC

L.E.D. DREDGE LIGHTS


DREDGE-888 - Uses two 6 volt alkaline lantern spring batteries. Will run 8 months on two
alkaline batteries Eveready EN529. Steady state drain - .18 amp hours per night.
TOPHAT-FLAT
TOPHAT-FLAT - Mounts to any flat surface. Waterproof. Polycarbonate plastic. Available
in pipe mount.
DREDGE-BZ - Uses one 6 volt alkaline spring battery. Will run 4 months on one alkaline
DREDGE-888 DREDGE-BZ battery Eveready EN529. Steady state drain - .18 amp hours per night.

Anchor Lights JULIAN A. McDERMOTT CORP. Loading Lights


Handlights (800) 842-5708 • www.mcdermottlight.com Vehicle Lights
Dock Lights Chargers
1639 Stephen St., Ridgewood, NY 11385
Buoy Lights Marker Lights
Tel. (718) 456-3606 Fax (718) 381-0229
Barge Lights Solar Lights
** See Our Ad In The Advertising Section **
Peters & Bay 133 5/3/06 12:24 AM Page 642

118-06

J.H.PETERS + BEY GmbH


NAVIGATION LIGHTS TYPE 760
For all vessels of 20 metres or more in length according to International Regulations for Preventing Collisions at Sea, 1972
(COLREGS 1972 – IMCO 72)
Features:
• Every light is equipped with its own terminal box. Ship’s cable is easy to
terminate straight into light.
• Durable materials and great structural strength withstand tough sea conditions.
• Top housing of the double lantern tilts for easy, one-handed bulb exchange. Hoistable Single
• Simple exchange of spares. The modular construction provides only a few Lantern
spares, each easy to mount.
Options:
• On request the tilting mechanism may be supplied in one of 4 positions.
• Marine cable 1,50 m – HO7 RN F2x1,5
• Upon request signaling lights can be customized in accordance with the
respective flag state and class of any vessel. Signaling lights are
required to be visible from 360°, i.e. all round. If the arc of visibility is
restricted by obstacles such as masts, funnels and other parts of the ship’s
superstructure, two signaling lights must be fitted, with different arcs of
visibility which together cover 360°.
Technical Data:
Approval:
BSH (Bundesamt für Seeschiffahrt und Hydrographie)
GL (Germanischer Lloyd)
Housing:
Black polyamid, glass fibre reinforced, shock resistant, Standard Single and Double Lanterns
non-corrosive, non-magnetic, seawater resistant,
with stainless steel screens (1.4571)
Connection:
Terminal box on every light
Bulbholder: P 28 s
Lens: PMMA Double lantern with top
module tilted up for bulb
Protection: DIN IEC 60945 (equivalent to IP 56) replacement.

Spare Parts Ordering Information

360° 360° 360° 360° 360°

Color green red white white yellow red white red green yellow white
Angle 112,5° 112,5° 225° 135° 135° 135° 360° 360° 360° 360° 360°
Visibility 3 nm 3 nm 6 nm 3 nm 3 nm 3 nm 3 nm 3 nm 3 nm 3 nm 5 nm
Starboard Port Masthead Stern Towing Suez Signaling Signaling Signaling Signaling Manoeuvering
Top 761 510 762 510 763 510 764 510 767 530 764 550 766 510 767 530 766 550 766 570
Module
Bottom 761 500 762 500 763 500 764 500 764 520 764 540 766 500 766 520 766 540 766 560 766 590
Module
Bottom
Module- 767 500 767 520 767 540 767 560
Hoistable

Kerger Marine Electric, Inc. Head Office: Kerger & Co. B.V.
4350 South Wayside Drive, Suite 104 Fokkerstraat 515
Houston, TX 77087 AGENTS for PETERS & BEY NAVIGATION LIGHTS 3125 BD Schiedam
Phone: (713) 643-3326 for the U.S., Puerto Rico, and Mexico The Netherlands
Fax: (713) 643-6683 Phone: 31-104374500
(800) 328-3670 Visit our Website for more information: www.kerger.com Fax: 31-104376825
E-mail: saleshouston@kerger.com ALL MAIN EUROPEAN PARTS AVAILABLE IN SHORT TIME E-mail: sales@kerger.nl
Peters & Bay 3010 4/25/06 8:07 PM Page 642

119-05

J.H.PETERS + BEY GmbH


NAVIGATION LIGHTS TYPE 760
For all vessels of 20 metres or more in length according to International Regulations for Preventing Collisions at Sea, 1972
(COLREGS 1972 – IMCO 72)

Single Lantern – Hoistable

Ordering Information

360° 360° 360° 360° 360°

Color green red white white yellow red white red green yellow white
Angle 112,5° 112,5° 225° 135° 135° 135° 360° 360° 360° 360° 360°
Visibility 3 nm 3 nm 6 nm 3 nm 3 nm 3nm 3 nm 3 nm 3 nm 3 nm 5nm
Starboard Port Masthead Stern Towing Suez Signaling Signaling Signaling Signaling Manoeuvering
Double Lantern
2x 24 Volt 761 301 762 301 763 301 764 301 764 321 764 181 766 311 766 321 766 331 766 341
2x 115 Volt 761 302 762 302 763 302 764 302 764 322 764 182 766 312 766 322 766 332 766 342
2x 230 Volt 761 303 762 303 763 303 764 303 764 323 764 183 766 313 766 323 766 333 766 343
1x 230 Volt, 761 304 762 304 763 304 764 304 764 324 764 184 766 314 766 324 766 334 766 344
1x 24 Volt
Single Lantern
1x 24 Volt 761 101 762 101 763 101 764 101 764 121 764 161 766 101 766 121 766 131 766 141 766 171
1x 115 Volt 761 102 762 102 763 102 764 102 764 122 764 162 766 102 766 122 766 132 766 142 766 172
1x 230 Volt 761 103 762 103 763 103 764 103 764 123 764 163 766 103 766 123 766 133 766 143 766 173
Single Lantern - Hoistable
1x 24 Volt 767 101 767 121 767 131 767 141
1x 115 Volt 767 102 767 122 767 132 767 142
1x 230 Volt 767 103 767 123 767 133 767 143

1881 – 2006
125 Years of Service
to the J.H.Peters + Bey GmbH
Schnackenburgallee 151 • D-22525 Hamburg, Germany
Marine Industry Tel: +49-40-54 76 00-0 • Fax: +49-40-54 76 00-76 • www.peters-bey.com
116 4/26/06 3:24 PM Page 1

120-06

PERKO, INC.
NAVIGATION LIGHT SELECTION CHART
For Commercial Power Driven Vessels Over 20 Meters (65.6 ft.) In Length
This Chart is Provided as a guide for Light Selection, Not Positioning. Refer to the 72 COLREGS and the U.S. Inland Navigation Rules
for Positioning Details. Depending Upon the Activity of the Vessel, It May be Required to Carry a Combination of Several of the
Types of Lights Listed Below. Consult your Local U.S. Coast Guard Office for Specific Vessel Requirements.
Refer to Product Listings for Specific Visibility Arc and Range Requirements.

VESSEL ACTIVITY VESSEL SIZE LIGHTING CODES


Power Driven, underway and making way Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, SN, M
Power Driven, underway and making way Vessels over 50 Meters (164.00 ft.) in length SL, SN, M, MR
Towing by pushing ahead (COLREGS) Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, SN, 2M
Vessels over 50 Meters (164.00 ft.) in length SL, SN, 2M, MR
Barges SL
Towing by pushing ahead (Inland) Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, 2T, 2M
NOTE: Tug and Barge rigidly connected in a composite unit Vessels over 50 Meters (164.00 ft.) in length SL, 2T, 2M, MR
Same as power driven vessel above Barges SL
Towing Alongside (COLREGS) Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, SN, 2M
Vessels over 50 Meters (164.00 ft.) in length SL, SN, 2M, MR
Barges SL, SN
Towing Alongside (Inland) Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, 2T, 2M
Vessels over 50 Meters (164.00 ft.) in length SL, 2T, 2M, MR
Barges SL, SN, SF
Towing Astern, tow length less than 200 meters Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, T, 2M
(656.0 ft.) in length Vessels over 50 Meters (164.00 ft.) in length SL, T, 2M, MR
Barges SL, SN
Towing Astern, tow length over 200 meters Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, T, 3M
(656.0 ft.) in length Vessels over 50 Meters (164.00 ft.) in length SL, T, 3M, MR
Barges SL, SN
Fishing, engaged, underway and making way Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, SN, RW
with nets or lines astern Vessels over 50 Meters (164.00 ft.) in length SL, SN, 3M, RW
Fishing, engaged, underway and making way Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, SN, GW
“Trawling” dragging a dredge net Vessels over 50 Meters (164.00 ft.) in length SL, SN, 3M, GW
Fishing, engaged, underway and making way with an Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, SN, RW, W
obstruction over the side more than 150 meters (492.0 ft.) Vessels over 50 Meters (164.00 ft.) in length SL, SN, MR, RW, W
Fishing, engaged, not making way or at anchor Vessels of any length RW
Restricted in maneuverability making way Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length SL, SN, M, RWR
Vessels over 50 Meters (164.00 ft.) in length SL, SN, MR, RWR
Restricted in maneuverability not making way Vessels of any length RWR
Restricted in maneuverability not making way with an Vessels of any length. RWR, 2R, 2G
obstruction over the side Obstruction such as a pipeline Y (See COLREGS for Details)
Restricted in maneuverability and towing See “Towing” above for running and towing light requirements RWR
At Anchor Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length W
Vessels 50 Meters (164.00 ft.) to 100 Meters (328.0 ft.) in length W, W/A
Vessels over 100 Meters (328.0 ft.) in length W, W/A, WL
Not under command and making way Vessels of any length SL, SN, 2R
Not under command and not making way Vessels of any length 2R
Aground Vessels 20 Meters (65.6 ft.) to 50 Meters (164.00 ft.) in length W, 2R
Vessels over 50 Meters (164.00 ft.) in length W, W/A, 2R
Pilot vessel engaged in pilotage duty Vessels of any length SL, SN, WR
Pilot vessel at anchor Vessels of any length W, WR

KEY TO LIGHTING CODES


SL Side Lights (Red & Green) T Towing Light mounted vertically above W White All-Round Light
SN Stern Light a Stern Light W/A White All-Round Light forward and above
M Masthead Light 2T 2 Towing Lights mounted in a vertical line anchor light astern
MR Masthead “Range” Light GW Green All-Round Light mounted vertically above WR White All-Round Light mounted vertically
a White All-Round Light above a Red All-Round Light
2M 2 Masthead Lights mounted in a vertical line
RW Red All-Round Light mounted vertically above a SF Special Flashing Yellow Barge Light
3M 3 Masthead Lights mounted in a vertical line White All-Round Light YA Yellow All-Round Light
2R 2 Red All-Round Lights mounted in a vertical line RWR 3 All-Round Lights mounted vertically, WL Working Lights that illuminate the deck
2G 2 Green All-Round Lights mounted the highest and lowest being red and the middle
in a vertical line being white.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0117-03 5/3/06 12:26 AM Page 1

121-06

PERKO, INC.
SINGLE LENS NAVIGATION LIGHTS DOUBLE LENS NAVIGATION LIGHTS
For Use on Any Length Vessel Over
For Use on Any 20 Meters (65.6 Ft.) in Length
Length Vessel Features
Over 20 Meters Cast Bronze
Complete with a Pre-Wired Medium Prefocus Socket
(65.6 Ft.) and two 3 Foot Lengths of 16/3-S0 Cable Through
Fig. 1172 in Length Watertight Terminal Tubes. Watertight Access Cap
for Rebulbing and Cleaning. Two PERKO Cat. No.
342 004 CLR, 120 Volt Bulbs Included.
Fig. 1164 Important Bulb Data
Features To comply with the U.L. Standard 1104, the
Cast Bronze lights listed on this page must use PERKO Cat. No.
Complete with a Pre-Wired Medium Prefocus Socket and 3 Feet 342 004 CLR bulb or 342 RS4 CLR bulb when a
of 16/3-S0 Cable Through a Watertight Terminal Tube. “Rough Service” bulb is required.
Watertight Access Cap for Rebulbing and Cleaning.120 Volt Bulb Included.
Important Bulb Data
To comply with the U.L. Standard 1104, the lights listed on this page Height Overall Height Lens Weight Mounting Bolt Size
Description Inches Inches Pounds Inches
must use PERKO Cat. No. 342 004 CLR bulb or 342 RS4 CLR bulb when
a “Rough Service” bulb is required. Bronze 17-1/4 6-3/4 17 3/8

Height Overall Height Lens Weight Mounting Bolt Size


Description Inches Inches Pounds Inches Ordering Information
Bronze 9-1/4 6-3/4 11-1/8 3/8 Visibility Visibility Plain Bronze
Description Arc Miles Cat. No.
Red Side Light 1121⁄2° 3 1164 RE0 PLB
Ordering Information Green Side Light 1121⁄2° 3 1164 GE0 PLB
White Masthead Light 225° 6 1165 E00 PLB
Visibility Visibility Plain Bronze White Stern Light* 135° 3 1166 E00 PLB
Description Arc Miles Cat. No. Yellow Towing Light 135° 3 1166 ME0 PLB
Red Side Light 112 ⁄2°
1
3 1172 RE0 PLB
White All-Round Light* 360° 3 1167 E00 PLB
Green Side Light 1121⁄2° 3 1172 GE0 PLB
White All-Round Light** 360° 6 1167 HE0 PLB
White Masthead Light 225° 6 1173 E00 PLB
Red All-Round Light 360° 3 1168 RE0 PLB
White Stern Light* 135° 3 1174 E00 PLB
Green All-Round Light 360° 3 1168 GE0 PLB
Yellow Towing Light 135° 3 1174 ME0 PLB
Yellow All-Round Light 360° 3 1168 ME0 PLB
White All-Round Light* 360° 3 1169 E00 PLB
Special lights to meet local requirements are available upon request.
White All-Round Light** 360° 6 1169 HE0 PLB
*These lights are supplied with a Gray Tinted Lens. **For Great Lakes use.
Red All-Round Light 360° 3 1170 RE0 PLB
Green All-Round Light 360° 3 1170 GE0 PLB
Yellow All-Round Light 360° 3 1170 ME0 PLB
Special lights to meet local requirements are available upon request. Spare Parts
*These lights are supplied with a Gray Tinted Lens. **For Great Lakes use.
Ordering
Information
1) Access Cap, O-Ring and
Spare Parts Retainer,
Cat. No. 1105 000 BLK
Ordering 2) O-Ring for Cap, Cat. No. 1119
Information 3) Lens Gasket, Cat. No. 1143

1) Access Cap, O-Ring and 4) Spare Lenses:


Retainer, Cat. No. 1105 000 BLK Red, Cat. No. 261 001 RED
Green, Cat. No. 261 001 GRN
17-1/4 Inches

2) O-Ring for Cap, Cat. No. 1119


9-1/4 Inches

White, Cat. No. 261 001 CLR


3) Lens Gasket, Cat. No. 1143 Gray, Cat. No. 261 001 GRY
4) Spare Lenses: Yellow, Cat. No. 261 001 YLW
Red, Cat. No. 261 001 RED
5) Lens Retaining Clip with Bolt,
Green, Cat. No. 261 001 GRN
Cat. No. 1133
White, Cat. No. 261 001 CLR
Gray, Cat. No. 261 001 GRY 6) Dual Medium Prefocus Socket
Yellow, Cat. No. 261 001 YLW Assembly, Cat. No. 303
5) Lens Retaining Clip with Bolt,
7) Male Electrical Plug,
Cat. No. 1133
Cat. No. 303 A00
6) Medium Prefocus Socket,
Cat. No. 367 8) Female Electrical Receptacle,
Cat. No. 303 B00

www.manning-electric.com
Stocking Distributor for
Perko, INC.

154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0118-03 4/27/06 4:59 PM Page 1

122-06

PERKO, INC.
NAVIGATION LIGHTS
For Use On Vessels 20 Meters (65.6 ft.) to 50 Meters (164.0 ft.) in Length

Red & Green Sidelights Stern or Towing Lights All-Round Lights Masthead Lights
112-1/2° 135° 360° 225°

Height Height Mounting Weight Visibility Visibility


Overall Inches Lens Inches Screw Size Pounds Description Arc Miles Cat. No.
7-1/2 4-1/2 1/4 3-1/8
Red Sidelight 112 1⁄2° 2 1127 RA0 BLK
Black Plastic Green Sidelight 112 1⁄2° 2 1127 GE0 BLK
Complete with Pre-Wired Double Contact Socket and 3 feet of 16/3-SJO White Masthead Light 225° 5 1128 A00 BLK
Cable for 12, 24, 32, or 120V. Watertight access cap for rebulbing and
White Sternlight* 135° 2 1129 A00 BLK
cleaning. Bulb Not Included.
Important Bulb Data Spare Parts Ordering Information Yellow Towing Light 135° 2 1129 MA0 BLK
To comply with U.L. Standard Cat. No. Item White All-Round Light* 360° 2 1130 A00 BLK
1104, the lights listed on this 1105 000 BLK Cap, Retainer and O-Ring White All-Round Light** 360° 5 1130 HA0 BLK
page must use one of the 1119 Cap O-Ring
following bulbs: 249 000 RED Red Lens Assembly Red All-Round Light 360° 2 1130 RA0 BLK
Required Bulbs 249 000 GRY Gray Lens Assembly Green All-Round Light 360° 2 1130 GA0 BLK
12V – Cat. No. 374 001 CLR 249 000 GRN Green Lens Assembly Yellow All-Round Light 360° 2 1130 MA0 BLK
24V – Cat. No. 374 002 CLR 249 000 YLW Yellow Lens Assembly
*These lights are supplied with a gray tinted lens.
32V – Cat. No. 374 003 CLR 249 000 CLR White Lens Assembly
**For Great Lakes use.
120V – Cat. No. 374 004 CLR 134 Double Contact Socket

ALL-ROUND LIGHTS
For Use On Any Length Vessel Over 20 Meters (65.6 ft.)
Important Bulb Data
To comply with Visibility Catalog Catalog
U.L. Standard 1104, Description Miles Number Number
the lights listed on White All-Round Whistle Light 5 454 E00 PLB —
this page must use a
PERKO Cat. No. White All-Round Light* 3 403 E03 PLB 412 E00 PLB
342 004 CLR bulb or Red All-Round Light 3 403 RE3 PLB 412 RE0 PLB
Cat. No. 342 RS4 CLR Green All-Round Light 3 403 GE3 PLB 412 GE0 PLB
when a “Rough
Service” bulb Yellow All-Round Light 3 403 ME3 PLB 412 ME0 PLB
is required. *These Lights are Supplied with Gray Tinted Lenses.
Fig. 412 Figs. 403-3 & 454E

Cast Bronze Spare Parts Ordering Information


Complete with Medium Prefocus Socket and PERKO Cat. No. Item
Cat. No. 342 004 CLR, 120V Bulb. 1143 Lens or Cover Gasket
261 001 RED Red Lens
Fig. Height Height Tapped Pipe Weight 261 001 GRN Green Lens
No. Overall Inches Lens Inches Size Inches Pounds 261 001 GRY Gray Lens
403 & 454 11-1/2 6-3/4 1 8-1/4 261 001 YLW Yellow Lens
412 14 6-3/4 * 8-1/4 1133 Lens Retaining Clip with Bolt
347 Medium Prefocus Socket
*Supplied with Watertight Terminal Tube for 16/3-SO Cable.

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of Houston Office: 7140 Navigation • Houston, TX 77011
PERKO Commercial Navigational Lights. Tel: (713) 928-6288 • Fax: (713) 928-6289
0119-04 4/26/06 3:29 PM Page 1

123-06

PERKO, INC.
Navigation Lights
For Use On Vessels Over 20 Meters (65.6 ft.) in Length
Black Plastic
Complete with a pre-wired medium prefocus socket
and one (double lens navigation lights come with two)
3-foot length of 16/3-SO cable through a watertight
terminal tube. Watertight access cap for rebulbing and
cleaning. Bulb not included.

Spare Parts Ordering Information


Fig. 1369 Fig. 1370 Fig. 1372 Fig. 1373 Fig. 1374
All-Round Light All-Round Light Side Light Masthead Light Stern Light Cat. No. Item
Important Bulb Data 1363 000 BLK Access Cap Assembly
To comply with U.L. Standard 1104, the lights listed on this page must be 367 Medium Prefocus Socket
used with the following PERKO bulbs:
Required Bulbs Height Overall Height Lens Mounting Bolt Weight
24V – Cat. No. 342 024 CLR 120V – Cat. No. 342 004 CLR Inches Inches Size Inches Pounds
120V – Cat. No. 342 RS4 CLR 220V – Cat. No. 342 220 CLR 9-1/4 6-3/4 3/8 5-1/8
(when a “Rough Service” bulb is required)
Single Lens Navigation Lights
Description Visibility Visibility Single Stack
Arc Miles Cat. No.
Red Side Light 112-1/2° 3 1372 RE0 BLK
Green Side Light 112-1/2° 3 1372 GE0 BLK
White Masthead Light 225° 6 1373 E00 BLK
White Stern Light* 135° 3 1374 E00 BLK
Yellow Towing Light 135° 3 1374 ME0 BLK
White All-Round Light* 360° 3 1369 E00 BLK
White All-Round Light** 360° 6 1369 HE0 BLK
Red All-Round Light 360° 3 1370 RE0 BLK
Green All-Round Light 360° 3 1370 GE0 BLK
Yellow All-Round Light 360° 3 1370 ME0 BLK
Special lights to meet local requirements are available upon request.
* These lights are supplied with a Gray Tinted Lens. ** For Great Lakes use.

Height Overall Height Lens Mounting Bolt Weight


Inches Inches Size Inches Pounds
17-1/4 6-3/4 3/8 10-1/2

Fig. 1364 Fig. 1366 Fig. 1366 Fig. 1367


Side Light Towing Light Masthead Light All-Round Light

Double Lens Navigation Lights


Description Visibility Visibility Single Stack
Arc Miles Cat. No.
Red Side Light 112-1/2° 3 1364 RE0 BLK
Green Side Light 112-1/2° 3 1364 GE0 BLK
White Masthead Light 225° 6 1365 E00 BLK
White Stern Light 135° 3 1366 E00 BLK
Yellow Towing Light 135° 3 1366 ME0 BLK
White All-Round Light* 360° 3 1367 E00 BLK
White All-Round Light** 360° 6 1367 HE0 BLK
Red All-Round Light 360° 3 1368 RE0 BLK
Green All-Round Light 360° 3 1368 GE0 BLK
Yellow All-Round Light 360° 3 1368 ME0 BLK
Special lights to meet local requirements are available upon request.
* These lights are supplied with a Gray Tinted Lens. ** For Great Lakes use.

Donovan marine perko federal propellers Buck Al.gonquin Baier hatch Penray
Carlisle & finch co. Mathers Patterson newmar perko Wintech shakespeare
awlgrip Johnson Kahlenberg airhorns Centex marine fab uniden Charles
marine products Hawboldt Industries zodiac jabsco Frank w murphy UMC
deck fittings Racor diamond sea-glaze duramax marine Trellex morse
0120-03 4/26/06 3:30 PM Page 1

124-06

PERKO, INC.

SPECIAL PURPOSE LIGHTS FOR USE ON VESSELS OF ANY LENGTH


SPECIAL FLASHING YELLOW BARGE LIGHT
Sheet Metal—Galvanized Steel Important Bulb Data
• Complete with Medium PreFocus Socket & Watertight Terminal Tube for 16/3-SO To comply with Federal Requirements
Cable • Sealed Flasher Unit • Watertight Access Cap for Rebulbing and Cleaning this light must use a PERKO Cat. No.
• 120V Bulb Not Included 342 004 CLR bulb or 342 RS4 CLR bulb
when a “Rough Service” bulb is required.
Designed to meet U.S. Federal Inland Requirements for flashing yellow 180°-225°
light for barges, canal boats, etc., that are being pushed ahead or towed along side Spare Parts Ordering Information
of a tug boat. For use on 120V A.C. only. Federal Requirements for this light are Cat. No. Item
applicable for: inland waters, Atlantic, Pacific and Gulf coasts, intercoastal waterways 133 Flasher
and western rivers. Refer to the U.S. Inland Navigation Rules for application, 1119 Cap O-Ring
configuration and technical details. 256 001 YLW Lens
Fig. 1111ME GALVANIZED STEEL (pre-primed) — Cat. No. 1111 ME1 GAL 347 A00 Med. Prefocus Socket
Overall Height: 12” Lens Height: 6-3/4” Visibility: 2 miles 1105 000 BLK Cap, Retainer & O-Ring
Visibility Arc: 225° Flashes Per Minute: 50-70 Weight: 6-5/8 lbs.

PANAMA CANAL BLUE STEERING LIGHT Spare Parts Ordering Information


Required Bulbs
Black Plastic Important Bulb Data 12V – Cat. No. 374 001 CLR
Complete with Pre-Wired Contact Socket and 3 feet of To comply with 24V – Cat. No. 374 002 CLR
16/3-SJO Cable For 12, 24, 32 or 120V. Watertight access Panama Canal 32V – Cat. No. 374 003 CLR
cap for rebulbing and cleaning. Bulb Not Included. Requirements, 120V – Cat. No. 374 004 CLR
Cat. No. 1129 BA0 BLK the light above
must use a PERKO Cat. No. Item
Overall Height: 7-1/2” Lens Height: 4-1/2” 249 000 BLU Lens
Fig. No. 374 bulb.
Visibilty Arc: 135° Weight: 3-1/8 lbs. 1119 Cap O-Ring
134 Double Contact Socket
Fig. 1129BA 1105 000 BLK Cap, Retainer & O-Ring

ALL-ROUND LIGHTS
For Use On Vessels 20 Meters (65.6 ft.) to 50 Meters (164.0 ft.) in Length
Plain Bronze Cat. No. Chrome Plated Bronze Cat. No.
Description
Pedestal Base Pipe Mount Base Pedestal Base Pipe Mount Base
White All-Round Light 112 A00 PLB 309 A00 PLB 112 A00 CHR 309 A00 CHR
Red All-Round Light 112 RA0 PLB 309 RA0 PLB 112 RA0 CHR 309 RA0 CHR
Green All-Round Light 112 GA0 PLB 309 GA0 PLB 112 GA0 CHR 309 GA0 CHR
Yellow All-Round Light 112 MA0 PLB 309 MA0 PLB 112 MA0 CHR 309 MA0 CHR

Important Bulb Data Required Bulbs


To comply with U.L. Standard 1104, 12V – Cat. No. 374 001 CLR
Fig. 309A the lights listed on this page 24V – Cat. No. 374 002 CLR Fig. 112A
must use one of the following bulbs: 32V – Cat. No. 374 003 CLR
120V – Cat. No. 374 004 CLR
Cast Bronze
Plain or Chrome Plated, Complete with Double Contact Electrical Spare Parts
Socket for 12, 24, 32 or 120V. Visibility—2 miles. Bulb Included. Fig. 112A & 309A
Cat. No. Item
Fig. Height Dia. Tapped Weight 106 000 WHT White Globe
No. Overall Base Pipe Size Pounds 106 000 RED Red Globe
Inches Inches Inches 106 000 GRN Green Globe
112A 8-3/4 3-1/8 — 2-1/2 106 000 YLW Yellow Globe
276 002 Double Contact Socket
309A 6-1/2 — 1/2 2-1/4

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of Houston Office: 7140 Navigation • Houston, TX 77011
PERKO Commercial Navigational Lights. Tel: (713) 928-6288 • Fax: (713) 928-6289
0121-04 4/27/06 5:01 PM Page 1

125-06

PERKO, INC.
SPARE PARTS
For Navigation Lights On Vessels Over 20 Meters (65.6 ft.) in Length
DUAL MEDIUM PREFOCUS SOCKET ASSEMBLY 112 1⁄2° LENSES
Phenolic – 250V – 1000W Height Overall Dia. Opening
Plug In Type – Prewired – with two medium prefocus sockets. Color Inches Inches Cat. No.
For use in double lens lights. Red 6-3/4 6-1/8 259 001 RED
Height Overall Width Overall Weight Green 6-3/4 6-1/8 259 001 GRN
Cat. No. Inches Inches Ounces Weight Size 1 Red 7-1/2 9-1/4 259 002 RED
8.5 oz.
303 3-7/8 3-7/8 9 Green 7-1/2 9-1/4 259 002 GRN
Weight Size 2
Male Plug Only Cat. No. 303 A00. 19.5 oz.
Female Plug Only Cat. No. 303 B00. 135° LENSES
Height Overall Dia. Opening
MEDIUM PREFOCUS SOCKETS Color Inches Inches Cat. No.
Phenolic – 250V – 1000W White 6-3/4 5-1/8 269 001 WHT

Height Overall Dia. Overall Standard Weight Per Red 6-3/4 5-1/8 269 001 RED
Cat. No. Inches Inches Package Pkg. Ounces Yellow 6-3/4 5-1/8 269 001 YLW
347 1-7/8 1-1/2 5 21-1/2 Weight Size 1 White 7-1/2 7-1/4 269 002 WHT
14 oz.
347 A00 1-7/8 1-1/2 5 21-1/2 Red 7-1/2 7-1/4 269 002 RED
Weight Size 2
Cat. No. 347 A00 supplied with metal Yellow 7-1/2 7-1/4 269 002 YLW
18.5 oz.
Mounting Cap Tapped for 3/8" I.P.S.

DOUBLE CONTACT BAYONET BULBS 225° LENSES


Height Overall Dia. Opening
Clear – 12V, 24V, 32V or 120V, Color Inches Inches Cat. No.
Type T-8, C-8, Filament—1-3/8” L.C.L. White 6-3/4 4-1/2 256 001 WHT
Cat. No. Voltage Wattage Candella Red 6-3/4 4-1/2 256 001 RED
374 001 CLR 12 30 24 Yellow 6-3/4 4-1/2 256 001 YLW
374 002 CLR 24 30 24 Weight Size 1 White 7-1/2 6-5/8 256 002 WHT
374 003 CLR 32 30 24 18.5 oz. Red 7-1/2 6-5/8 256 002 RED
374 004 CLR 120 30 24 Weight Size 2 Yellow 7-1/2 6-5/8 256 002 YLW
Standard Pkg. – 1 pc. Weight 1 oz. 27.5 oz.

MEDIUM PREFOCUS BULBS 360° LENSES


Clear – 120V Height Dia.
Overall Opening Clear Frosted
Catalog Number Wattage
Color Inches Inches Cat. No. Cat. No.
342 000 CLR 7.5
White 6-3/4 5-1/8 261 001 CLR 261 001 FRD
342 001 CLR** 15
Red 6-3/4 5-1/8 261 001 RED 261 RF1 RED
342 002 CLR** 25
Green 6-3/4 5-1/8 261 001 GRN 261 GF1 GRN
342 003 CLR** 40
Yellow 6-3/4 5-1/8 261 001 YLW 261 MF1 YLW
342 004 CLR** 60
Weight Size 1 Gray 6-3/4 5-1/8 261 001 GRY —
342 RS4 CLR* 60
13.5 oz. White 7-1/2 7-3/8 261 002 CLR 261 002 FRD
342 006 CLR 125
Weight Size 2 Red 7-1/2 7-3/8 261 002 RED 261 RF2 RED
Standard Pkg. – 1 pc. Weight 1 oz. 43 oz.
*Designed for rough service. **OEM Pkg. – 25 pcs. Green 7-1/2 7-3/8 261 002 GRN 261 GF2 GRN
Yellow 7-1/2 7-3/8 261 002 YLW 261 MF2 YLW
SINGLE CONTACT PREFOCUS BULBS
C-8 Filament Clear – 12V 360° LENSES – With Top Assembly
Cat. No. Amperage Mfg. No. Height Overall Dia. Overall
373 001 CLR .25 25A/S8 Color Inches Inches Cat. No.
373 002 CLR .55 55A/S8 White 5-3/4 5-1/2 249 000 CLR

373 003 CLR .77 77A/S8 Red 5-3/4 5-1/2 249 000 RED
Green 5-3/4 5-1/2 249 000 GRN
373 004 CLR 1.15 1.15A/S8
Weight 17 oz. Yellow 5-3/4 5-1/2 249 000 YLW
373 005 CLR 2.03 2.03A/S8SCP
Gray 5-3/4 5-1/2 249 000 GRY
Standard Pkg. – 1 pc. Weight 1 oz.

HARDWARE Full Line of Marine Electrical Supplies


IN STOCK
SPECIALTY CO. BOXES • SWITCHES • CIRCUIT BREAKERS
3419 11th Ave. S.W., Seattle, WA 98134 NAVY TUBES • WELD PADS • FIXTURES Perko Authorized
Tel: 206-624-5785 • Fax: 206-682-0186 SHIPBOARD/COMMERCIAL CABLE Stocking Distributor
http://home.att.net/~hardspec/ DC MOTORS • BLOWERS • ETC.
122 4/26/06 3:35 PM Page 1

126-06

PERKO, INC.
Top Vent
Cover
SEARCHLIGHTS – 800 SERIES 10”, 12”, OR 14”
Cast Bronze And Heavy Gauge Brass
12, 24, 32, 120 or 230 Volts
Polished Chrome or White PERKO-KOTE Finish
Halo Deflector
800 Series Searchlights are available in 10”, 12”, and 14”
Heavy Gauge Brass Body
sizes with Deck, Wheel, Lever or Lever/Gear Controls.
Glass Reflector with All models feature: halo deflectors, parabolic glass mirror
Shock Resistant Mounting
reflectors for maximum light output and ventilation covers
Stainless Steel Latches
for quick dissipation of heat to help prolong bulb life.
Weatherproof Construction Hinged front doors have quick release stainless steel latches
Interior Finished in Flat Black
to provide easy access for bulb replacement. 800 Series
Lower Vent Cover models are also available in white Perko-Kote finish;
on 12” and 14” Sizes
an advanced powder coating process that eliminates
Slide-Lock Focusing the need for painting while providing a scratch-resistant,
Device Behind Lower Vent
chip-proof surface. Bulbs are not included and must be
Heavy-Duty Yoke Mounting ordered separately. They are available in traditional
incandescent or quartz halogen.

3-Wire Cable,
Grounded
Base has Floating Stops to Allow
400 Degree Rotation

Bronze Base Casting Countersunk


for Four 5/16” Flathead Fasteners

DECK CONTROL SEARCHLIGHT 10”, 12”, AND 14”


Standard Pedestal Searchlights
Reflector “J” Polished White
Size Height Overall Chrome PERKO-KOTE
Inches Inches Catalog No. Catalog No.
10 20-1/8 883 0P1 CHR 883 0P1 WHT
12 22-1/8 883 0P2 CHR 883 0P2 WHT
14 25-1/8 883 0P3 CHR 883 0P3 WHT
High
Pedestal
Medium Pedestal Searchlights
Medium
Pedestal Reflector “J” Polished White
Size Height Overall Chrome PERKO-KOTE
Inches Inches Catalog No. Catalog No.
10 27-1/2 883 MP1 CHR 883 MP1 WHT
12 29-1/2 883 MP2 CHR 883 MP2 WHT
14 31-1/2 883 MP3 CHR 883 MP3 WHT

Searchlight Dimensions High Pedestal Searchlights


“A” Nominal Drum “C” Length Nominal Reflector “J” Polished White
Diameter Head Weight Size Height Overall Chrome PERKO-KOTE
Standard
Inches Inches Pounds Inches Inches Catalog No. Catalog No.
Pedestal
10 13 28 10 44 883 HP1 CHR 883 HP1 WHT
12 15 38 12 46 883 HP2 CHR 883 HP2 WHT
14 17 45 14 48 883 HP3 CHR 883 HP3 WHT

HAMILTON MARINE
Order Line
800-639-2715 hamiltonmarine.com
Landline
(207) 548-6302
Fax
(207) 548-6352 PORTLAND ROCKLAND SEARSPORT SOUTHWEST HARBOR
0123-04 4/27/06 5:03 PM Page 1

127-06

PERKO, INC.
10”, 12”, AND 14” SEARCHLIGHTS
Standard Pedestal Searchlight Head Assemblies
LEVER CONTROL WHEEL & LEVER/GEAR CONTROL
Reflector “J” Polished White Polished White
Size Height Overall Chrome PERKO-KOTE Chrome PERKO-KOTE
Inches Inches Catalog No. Catalog No. Catalog No. Catalog No.
Medium
Pedestal 10 20-1/8 884 0P1 CHR 884 0P1 WHT 885 0P1 CHR 885 0P1 WHT
12 22-1/8 884 0P2 CHR 884 0P2 WHT 885 0P2 CHR 885 0P2 WHT
14 25-1/8 884 0P3 CHR 884 0P3 WHT 885 0P3 CHR 885 0P3 WHT

Medium Pedestal Searchlight Head Assemblies


LEVER CONTROL WHEEL & LEVER/GEAR CONTROL
Reflector “J” Polished White Polished White
Lever Size Height Overall Chrome PERKO-KOTE Chrome PERKO-KOTE
High Inches Inches Catalog No. Catalog No. Catalog No. Catalog No.
Control Pedestal
10 28-1/4 884 MP1 CHR 884 MP1 WHT 885 MP1 CHR 885 MP1 WHT
12 30-1/4 884 MP2 CHR 884 MP2 WHT 885 MP2 CHR 885 MP2 WHT
14 33-1/4 884 MP3 CHR 884 MP3 WHT 885 MP3 CHR 885 MP3 WHT

High Pedestal Searchlight Head Assemblies


LEVER CONTROL WHEEL & LEVER/GEAR CONTROL
Reflector “J” Polished White Polished White
Size Height Overall Chrome PERKO-KOTE Chrome PERKO-KOTE
Inches Inches Catalog No. Catalog No. Catalog No. Catalog No.
Standard
Pedestal 10 44-3/4 884 HP1 CHR 884 HP1 WHT 885 HP1 CHR 885 HP1 WHT
12 46-3/4 884 HP2 CHR 884 HP2 WHT 885 HP2 CHR 885 HP2 WHT
14 49-3/4 884 HP3 CHR 884 HP3 WHT 885 HP3 CHR 885 HP3 WHT

Searchlight Dimensions
Wheel &
Lever/Gear “A” Nominal Drum “C” Length Nominal
Control Diameter Head Weight
Wheel & Inches Inches Pounds
Lever/Gear 10 13 28
Control
12 15 38
14 17 45
Lever Control
Assembly LEVER CONTROL WHEEL & LEVER/GEAR CONTROL
Length Control Nominal Weight For Standard Pedestal For Medium Pedestal For High Pedestal For Standard Pedestal For Medium Pedestal For High Pedestal
Inches Pounds Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
“E” Lever/Gear Control Fig. 969
8-1/2 6 851 000*** 851 M00*** 851 H00*** 969 000** 969 M00** 969 H00**
15-1/2 9 851 0A0 851 MA0 851 HA0 969 0A0 969 MA0 969 HA0
22-1/2 12 851 0B0 851 MB0 851 HB0 969 0B0 969 MB0 969 HB0
29-1/2 15 851 0C0 851 MC0 851 HC0 969 0C0 969 MC0 969 HC0
“F” Wheel Control Fig. 852
7-1/2 6 — — — 852 000* 852 M00* 852 H00*
14-1/2 9 — — — 852 0A0 852 MA0 852 HA0
21-1/2 12 — — — 852 0B0 852 MB0 852 HB0
28-1/2 15 — — — 852 0C0 852 MC0 852 HC0
*Maximum Ceiling Thickness, 3” **Maximum Ceiling Thickness, 3-1/2” ***Maximum Ceiling Thickness, 4-1/2”

Note: To order, specify Head Assembly No., Catalog No., or Control Assembly Catalog No.
Bulbs must be ordered separately.

Stocking Distributor for Please see our ad


for complete
PERKO P.O. BOX 161 • SOUTH RIVER • NEW JERSEY 08882 line of products.
1-800-541-0577 • (732) 238-9434 • FAX (732) 238-8036 • www.vikingterminal.com • sales@vikingterminal.com
124 4/27/06 5:07 PM Page 1

128-06

PERKO, INC.
BULB AND SOCKET ORDERING INFORMATION
For Searchlights 800 Series – 10”, 12”, and 14”
Bulbs are not included in lights
To give good results, the bulb and reflector must be perfectly to many factors, (i.e., a light source out of focus by 1/32 inch,
compatible. Therefore, be sure to specify the catalog number under-voltage of only 4%, or differences between bulb
of the bulb desired. Peak candlepower is exceedingly sensitive manufacturers can cause a reduction of range of up to 20%).

INCANDESCENT BULBS
Bulb Socket For Searchlight Rated* Mfg.
Catalog Number Voltage Wattage Socket Type Code Letter Sizes Inches Life Hours Bulb Code
806 32 500 Medium Screw B 10, 12, 14 50 DLT
807 120 500 Medium Prefocus E 10, 12, 14 25 CZX
809 120 750 Medium Prefocus E 12, 14 25 DPJ
837 120 750 Medium Prefocus E 12, 14 200 DDY
810 120 1000 Medium Prefocus E 12, 14 25 DRS
811 120 1000 Mogul Screw D 12, 14 25 DRW
860 230 1000 Medium Prefocus E 12, 14 50 DWK
For a More Concentrated Beam, Longer Range, Brighter Light and a Longer Life, We Recommend the Following Bulbs.

“QUARTZ” TUNGSTEN-HALOGEN BULBS


Bulb Socket For Searchlight Rated* Mfg.
Catalog Number Voltage Wattage Socket Type Code Letter Sizes Inches Life Hours Bulb Code
816 12 100 2-Pin Prefocus F 10, 12, 14 50 FDT
836 24 150 2-Pin Prefocus G 10, 12, 14 50 DZE-FDS
817 32 200 2-Pin Prefocus H 10, 12, 14 200 G.E. 1945
844 120 500 Medium Prefocus E 10, 12, 14 100 BTM
820 120 600 2-Pin Prefocus I 10, 12, 14 75 DYS
845 120 750 Medium Prefocus E 12, 14 200 BTP
839 120 900 2-Pin Prefocus K 12, 14 75 BVA
846 120 1000 Medium Prefocus E 12, 14 200 BTR
Please Order Carefully, Bulbs are Not Returnable.
*NOTE: These are the “Rated Average Laboratory Life in Hours” of the Bulb Manufacturer obtained in closely controlled laboratory life testing of groups of lamps at their design
voltage. It is not necessarily the same as the service life where conditions such as shock, vibration, voltage fluctuation and environment may result in a shorter average attained life.

ELECTRIC SOCKET AND SUPPORT STAND ASSEMBLIES


Searchlights include a socket and support stand assembly based assemblies for field conversion, to meet a large variety of voltage
on the bulb or socket information given when ordering. and candlepower requirements with a minimum of inventory.
The following chart makes it possible to order and stock different

For 10” Searchlights For 12” Searchlights For 14” Searchlights


Catalog Height Stand Catalog Height Stand Catalog Height Stand
Socket Type Socket Code Number Inches Number Inches Number Inches
Medium Screw B 872 001 1-1/4 872 002 2-1/4 872 003 3-1/4
Medium Prefocus E 873 001 1-5/16 873 002 1-15/16 873 003 2-15/16
Mogul Screw D — — 874 002 7/16 874 003 1-1/4
2-Pin Prefocus (12V) F 875 001 3-1/2 875 002 4-1/2 875 003 5-1/2
2-Pin Prefocus (24V) G 876 001 3-1/4 876 002 4-1/4 876 003 5-1/4
2-Pin Prefocus (32V) H 878 001 3-1/4 878 002 4-1/4 878 003 5-1/4
2-Pin Prefocus (600W) I 879 001 3-1/8 879 002 4-1/8 879 003 5-1/8
2-Pin Prefocus (900W) K — — 880 002 3-13/16 880 003 4-13/16

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
125 4/27/06 5:08 PM Page 1

129-06

PERKO, INC.
BULB TECHNICAL DATA FOR 800 SERIES SEARCHLIGHTS
The Following Chart is Provided to Aid in Proper Bulb Selection
Searchlight Approximate Bulb Bulb Rated Maximum Horizontal Vertical
Size Voltage Range Catalog Life Candlepower Beam Spread Beam Spread
Wattage
Inches Miles* Number Hours** Output Degrees Degrees
12 1 816 100 50 1,168,000 1.7 1.4
24 1 836 150 50 891,000 2.6 1.5
32 3/4 817 200 200 571,000 2.6 1.7
10” 32 1 806 500 50 943,000 3.4 3.9 Mogul Prefocus
120 1 820 600 75 908,000 4.4 2.2
120 1-1/8 807 500 25 1,332,000 3.5 2.8
120 1-1/8 844 500 100 1,375,000 3.1 3.4
12 1-1/4 816 100 50 1,617,000 1.5 1.2
24 1-1/8 836 150 50 1,349,000 2.2 1.5
32 7/8 817 200 200 865,000 2.4 1.6
32 1-1/8 806 500 50 1,496,000 3.4 3.5 Medium Prefocus Medium Screw
120 1 837 750 200 977,000 4.1 3.7
120 1 845 750 200 1,185,000 3.7 5.2
120 1-1/8 820 600 75 1,410,000 4.3 1.9
12” 120 1-1/4 809 750 25 1,747,000 3.6 3.4
120 1-1/4 844 500 100 1,790,000 3.2 3.4
120 1-1/4 807 500 25 1,799,000 3.3 3.1
120 1-1/4 811 1000 25 1,816,000 4.0 4.9 2-Pin Prefocus
120 1-3/8 810 1000 25 1,894,000 4.0 3.8 ** The approximate ranges listed above
120 1-3/8 846 1000 200 1,911,000 3.9 5.0 are based on photometric measure-
120 1-1/2 839 900 75 2,482,000 4.5 5.5 ments of beam candlepower output
230 7/8 860 1000 950 865,000 6.9 5.9 under ideal conditions. Many factors
12 1-1/4 816 100 50 1,756,000 1.5 1.0 such as atmospheric conditions, size
24 1-1/8 836 150 50 1,367,000 2.3 1.2 and color of target, background, etc.,
32 1 817 200 200 943,000 2.2 1.5 may reduce effective range consider-
32 1-1/8 806 500 50 1,591,000 4.0 3.7 ably; therefore, these figures are offered
120 1-1/8 837 750 200 1,254,000 3.9 4.5 only as a guide to compare different
120 1-1/8 845 750 200 1,531,000 3.6 5.1 bulb and voltage options.
120 1-1/4 820 600 75 1,626,000 4.5 1.9 ** NOTE: These are the “Rated Average
14” 120 1-3/8 844 500 100 2,007,000 2.9 3.2 Laboratory Life in Hours” of the Bulb
120 1-3/8 811 1000 25 2,249,000 4.0 5.1 Manufacturer obtained in closely
120 1-1/2 807 500 25 2,353,000 3.2 3.2 controlled laboratory life testing of
120 1-1/2 809 750 25 2,361,000 3.7 4.0
groups of lamps at their design voltage.
It is not necessarily the same as the
120 1-1/2 846 1000 200 2,586,000 3.8 5.0 service life where conditions such as
120 1-1/2 810 1000 25 2,621,000 4.0 4.5 shock, vibration, voltage fluctuation
120 1-5/8 839 900 75 2,889,000 4.5 5.2 and environment may result in a
230 1 860 1000 950 1,021,000 7.7 6.2 shorter average attained life.

SPARE PARTS FOR 800 SERIES SEARCHLIGHTS


Front Front Door Rear Cover Reflector* Pinion
Fig. Size Glass with Glass Cat. No. Cat. No. Gear
Cat. No. Cat. No. Cat. No. NOTE:The Spare Part Catalog Numbers
10” 889 001 CLR 891 001 CHR 908 001 CHR 890001 — Listed Above are for the Polished
883 12” 889 002 CLR 891 002 CHR 908 002 CHR 890002 — Chrome (CHR) Finish.
14” 889 003 CLR 891 003 CHR 908 003 CHR 890003 — To Order White Finish, Replace
10” 889 001 CLR 891 001 CHR 902 001 CHR 890001 — the “CHR” in the Catalog Number
with the “WHT” Finish Code.
884 12” 889 002 CLR 891 002 CHR 902 002 CHR 890002 —
* Replacement Retaining Clips
14” 889 003 CLR 891 003 CHR 902 003 CHR 890003 —
(Cat. No. 910) for the Reflector
885 10” 889 001 CLR 891 001 CHR 902 001 CHR 890001 905 Should Also Be Ordered When
and 12” 889 002 CLR 891 002 CHR 902 002 CHR 890002 905 Ordering a Replacement Reflector
886 14” 889 003 CLR 891 003 CHR 902 003 CHR 890003 905 to Assure a Proper Fit.

SPARE SOCKETS FOR 800 AND 1900 SERIES SEARCHLIGHTS

Medium Screw Socket Medium Prefocus Socket 2-Pin Prefocus Socket 2-Pin Prefocus Socket Mogul Screw Socket Mogul Prefocus Socket
(Code “B”) (Code “E”) (Codes “F, G, H & I”) (Code “K”**) (Code “D”) (Codes “L & M”)
Catalog No. 894 Catalog No. 895 Catalog No. 899 Catalog No. 866 Catalog No. 897 Catalog No. 893
**For Use In 10”, 12” and 14” Searchlights Except When Catalog No. 839, 900W Bulb is Used (Socket Codes “F, G, H, & I”).
**For Use In 12”, 14“ and 19” Searchlights Only When the Catalog No. 839, 900W Bulb is Used.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
126 4/27/06 5:10 PM Page 1

130-06

PERKO, INC.
SEARCHLIGHT WITH PILOT HOUSE CONTROL
DESCRIPTION BENEFITS
• Complete with lever action • Up to 500,000 candle power
pilot house control • Searchlight beam range up to 3/4 mile
• Chrome plated brass construction • Easy to replace sealed beam
• Sealed beam design eliminates focus problems
FEATURES
• Available in 7" or 8" models
• For 12, 24 or 32V systems PHYSICAL DIMENSIONS 7 Inch 8 Inch
• Tin plated electrical contacts • Overall Length 24" 26"
and wiring • Maximum ceiling thickness 5" 5"
• 380° horizontal movement, • Barrel Length 7-7/32" 6-13/32"
70° vertical movement • Barrel Diameter 7-3/32" 8-3/16"
• For ceiling thickness of up to 5" • Height above the deck 14" 15"
• Corrosion resistant, splash • Protrusion below the ceiling 5-1/2" 5-1/2"
proof construction • Carton Size 12-1/2" x 13" x 28-1/4"
Catalog No. Spare Sealed Candle Range Ship Wt. Carton (lbs.)
Size Chrome White Wattage Voltage Beam No. Power (Miles) Standard Pkg.
7” HEAD 314 C07 12V 314 W07 12V 100 12V 433 003 12V 250,000 5/8 12.6
314 C07 24V 314 W07 24V 450 24V 433 003 24V 470,000 3/4 12.
314 C07 32V 314 W07 32V 200 32V 433 003 32V 260,000 5/8 13.8
8” HEAD 314 C08 12V 314 W08 12V 250 12V 433 004 12V 500,000 3/4 13.6
314 C08 24V 314 W08 24V 600 24V 433 004 24V 500,000 3/4 14.1
314 C08 32V 314 W08 32V 600 32V 433 004 24V* 500,000 3/4 15.0
*Used in conjunction with Internal Dropping Resistor (Cat. No. 314 R32 99A)

SEALED BEAM SEARCHLIGHTS – FIGS. 305 & 313


BRONZE BASE, BRASS BODY
Polished Chrome Plated or White PERKO-KOTE Powder Coating – For 12, 24 or 32V.
Dimensions Voltage Wattage Candlepower Approx. Range Sealed Beam
A 8" Miles Cat. No.
B 8-1/2" 12 100 250,000 5/8 433 003 12V
C 10" 24 450 470,000 3/4 433 003 24V
D 7" 32 200 260,000 5/8 433 003 32V
G 2"
H 2-1/8"
SEARCHLIGHT HEADS
C Figs. 305 & 313
Ordering Information
For For
Wheel or Wheel or
A
For For Lever/Gear Lever/Gear
Lever Control Lever Control Control Control
Polished White Polished White
Chrome PERKO-KOTE Chrome PERKO-KOTE
Voltage Cat. No. Cat. No. Cat. No. Cat. No.
12 305 H12 CHR 305 H12 WHT 313 H12 CHR 313 H12 WHT
24 305 H24 CHR 305 H24 WHT 313 H24 CHR 313 H24 WHT
32 305 H32 CHR 305 H32 WHT 313 H32 CHR 313 H32 WHT
B
Nominal Weight – 20 lbs.

CONTROL ASSEMBLIES
D
Figs. 851, 852, & 969
Fig. 305 Fig. 313 Stainless Steel Tubes With Chrome Plated Fittings
Control assemblies of different lengths may be interchanged
to offer a large variety of searchlights with a minimum of inventory.
“E” “E” “F”
Control Length Inches Lever Lever/Gear Wheel Nominal
Control* Control Control Weight
F “E” “F” Cat. No. Cat. No. Cat. No. Pounds
H
8-1/2 7-1/2 851 000 969 000 852 000 6
Fig. 851 Fig. 969 15-1/2 14-1/2 851 0A0 969 0A0 852 0A0 9
Fig. 852 22-1/2 21-1/2 851 0B0 969 0B0 852 0B0 12
G 29-1/2 28-1/2 851 0C0 969 0C0 852 0C0 15

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of Houston Office: 7140 Navigation • Houston, TX 77011
PERKO Commercial Navigational Lights. Tel: (713) 928-6288 • Fax: (713) 928-6289
127 5/3/06 12:27 AM Page 127

131-06

PERKO, INC.
19” SEARCHLIGHTS – 1900 SERIES
All Aluminum – White Perko-Kote Finish 32V, 120V, or 230V

Fig. 1902 Lever/Gear Control Wheel Control Deck Control Distant Electric Control Base

SEARCHLIGHT HEAD AND CONTROL ASSEMBLIES ELECTRIC SOCKET AND SUPPORT STAND ASSEMBLIES
Description Catalog No. Searchlights include a socket and support stand based on the bulb or socket
information given when ordering. The following chart makes it possible to order
Deck Control Searchlight Head Assembly* 1901 004 WHT and stock different assemblies for field conversion, to meet a large variety of
Wheel or Lever/Gear Control Searchlight Head Assembly 1902 004 WHT voltage and candlepower requirements with a minimum of inventory.
(Requires Control Assembly Below)
Searchlight Head Assembly For Distant Electric Control Base 1902 DE4 WHT Socket Socket & Stand Height
Socket Type Code Catalog Number Stand Inches
Wheel Control Assembly (For Above) 1922 000 WHT
Lever/Gear Control Assembly (For Above) 1921 000 WHT Medium Screw B 872 004 5-3/4
Distant Electric Control Base 1925 000 WHT Medium Prefocus E 873 004 5-7/16
*Can Not Be Fitted With Controls. Mogul Prefocus (1500W) L 1930 004 3-5/8
Custom Control Lengths and Pedestal Heights are Available. Specify Measurements. Mogul Prefocus (1000W & 2000W) M 1931 004 3-1/8
2-Pin Prefocus (900W) K 880 004 7-5/16

BULB ORDERING INFORMATION (Bulbs are not included in lights)


To give good results, the bulb and reflector must be perfectly compatible; bulb manufacturers can cause a reduction of range of up to 20%). For a
therefore be sure to specify the catalog number of the bulb desired. Peak More Concentrated Beam, Longer Range, Brighter Light and a Longer Life,
candlepower is exceedingly sensitive to many factors, (i.e., a light source We Recommend the Quartz/Halogen Bulbs.
out of focus by 1/32”, under-voltage of only 4%, or differences between

Horizontal Vertical
Approx. Bulb Socket Rated Maximum Beam Beam Mfg.
Range Catalog Code Life Candlepower Spread Spread Bulb
Voltage Miles* Number Bulb Type Socket Type Letter Wattage Hours** Output Degrees Degrees Code
32 1-2/3 806 Incandescent Medium Screw B 500 50 3,520,000 3.5 3.7 DLT
120 1-3/8 837 Incandescent Medium Prefocus E 750 200 2,076,000 3.6 4.2 DDY
120 1-5/8 845 Quartz/Halogen Medium Prefocus E 750 200 2,871,000 3.6 5.4 BTP
120 1-5/8 807 Incandescent Medium Prefocus E 500 25 3,191,000 3.5 4.0 CZX
120 1-2/3 859 Quartz/Halogen Mogul Prefocus M 2000 250 3,633,000 9.4 5.9 BVW
120 1-2/3 847 Quartz/Halogen Mogul Prefocus M 1000 200 3,659,000 4.5 5.4 BVV
120 1-3/4 844 Quartz/Halogen Medium Prefocus E 500 100 4,212,000 3.0 5.4 BTM
120 1-3/4 809 Incandescent Medium Prefocus E 750 25 4,454,000 3.6 4.5 DPJ
120 1-7/8 846 Quartz/Halogen Medium Prefocus E 1000 200 4,601,000 4.5 5.4 BTR
120 2 848 Quartz/Halogen Mogul Prefocus L 1500 100 5,596,000 5.9 5.7 DTA
120 2 810 Incandescent Medium Prefocus E 1000 25 5,622,000 3.6 4.2 DRS
120 2 839 Quartz/Halogen 2-Pin Prefocus K 900 75 5,769,000 5.9 5.4 BVA
120 2-1/8 840 Incandescent Mogul Prefocus L 1500 25 5,968,000 5.6 5.4 DRW
230 1-3/8 860 Quartz/Halogen Medium Prefocus E 1000 950 2,162,000 7.9 6.5 FKD
** The approximate ranges listed above are based on photometric measurements of beam candlepower output under ideal conditions. Many factors such as atmospheric conditions, size and color of
target, background, etc., may reduce effective range considerably; therefore, these figures are offered only as a guide to compare different bulb and voltage options.
** NOTE: These are the “Rated Average Laboratory Life in Hours” of the Bulb Manufacturer obtained in closely controlled laboratory life testing of groups of lamps at their design voltage. It is not
necessarily the same as the service life where conditions such as shock, vibration, voltage fluctuation and environment may result in a shorter average attained life.

Stocking Distributor for “Perko 19”


Searchlights &
PERKO P.O. BOX 161 • SOUTH RIVER • NEW JERSEY 08882 Controls in stock.
1-800-541-0577 • (732) 238-9434 • FAX (732) 238-8036 • www.vikingterminal.com • sales@vikingterminal.com
0128-03 4/27/06 5:11 PM Page 1

132-06

17-3/4” PERKO, INC.


Front to Back
XENON SEARCHLIGHTS
15” Housings – (500 Watt) with 120 VAC Power Supply
19” Housings – (1600 Watt) with 220 or 440 (3Ø) VAC Power Supplies
13-3/4”
MARINE GRADE ALUMINUM HOUSING
Cast aluminum yoke and heavy-duty base. Available as manually controlled (lever gear control)
or remotely controlled (distant electric control system). Optional heater for operation in areas
prone to icing conditions.
Assembly Weight: 71 lbs. The 9854 series can operated continuously at 1,600 watts, providing in excess of 100,000,000
candle power and up to 5.5 mile (IES Handbook) range. Reflector is iridium coated. Remote
Base Diameter: 12”
control panel controls lamp ignition (start-up) and focus from the pilot house. Heavy-duty
Gross Shipping Weight
cooling fan blows air inside the sealed housing across a series of fins integrally cast on the inside
(Including Crate)
Searchlight 130 lbs. of the searchlight housing to dissipate heat.
Power Supply 100 lbs. Complete searchlights include a single Xenon lamp.
Control Rod & Tube 19 lbs.
Distant Electric Manual Lever
Ordering Information Control Base Control
Fig. 9304 Light
Shown With Lever/Gear Control Searchlight Features Lamp Type and Figure Figure
Heaters Voltage Lamp Size Number Number
120 Vac 500 Watt Xenon 9304-E01-WH5 9304-L01-WH5
69-1/2”
800 Watt Xenon 9854-E02-WH8 9854-L02-WH8
Without 220 Vac (3Ø) 1000 Watt Xenon 9854-E02-WH0 9854-L02-WH0
Heaters 1600 Watt Xenon 9854-E02-WH6 9854-L02-WH6
800 Watt Xenon 9854-E04-WH8 9854-L04-WH8
440 Vac (3Ø) 1000 Watt Xenon 9854-E04-WH0 9854-L04-WH0
1600 Watt Xenon 9854-E04-WH6 9854-L04-WH6
120 Vac 500 Watt Xenon 9304-EH1-WH5 9304-LH1-WH5
800 Watt Xenon 9854-EH2-WH8 9854-LH2-WH8
With 220 Vac (3Ø) 1000 Watt Xenon 9854-EH2-WH0 9854-LH2-WH0
Power Supply
Heaters 1600 Watt Xenon 9854-EH2-WH6 9854-LH2-WH6
Fig. 9304 (500W) 800 Watt Xenon 9854-EH4-WH8 9854-LH4-WH8
440 Vac (3Ø) 1000 Watt Xenon 9854-EH4-WH0 9854-LH4-WH0
1600 Watt Xenon 9854-EH4-WH6 9854-LH4-WH6

XENON LAMPS
Assembly Weight: 145 lbs.
Base Diameter: 12” Ordering Information
Gross Shipping Weight
(Including Crate)
Searchlight 258 lbs.
Power Supply 264 lbs.
Control Rod & Tube 19 lbs.

WARNING: Xenon lamps are filled with Xenon Gas under high pressure.
They may explode in either hot or cold state, especially if dropped or
mishandled. Always wear protective safety equipment (a protective face
mask with neck guard, chest protector, heavy clothing and leather gloves)
when handling a lamp.
6” Amperage Ratings
Xenon Lamp Catalog Current Recommended Candle Range
Size Number Range Operation Power Miles
300 Watt* 9563-000 12A - 16A 15A @ 20V 20,000,000 3.1
18” 500 Watt* 9565-000 20A - 30A 30A @ 15V 35,000,000 3.8
800 Watt 9568-000 30A - 45A 37A @19V 65,000,000 4.5
1000 Watt 9560-000 30A - 55A 50A @ 20V 80,000,000 5.1
Fig. 9854 Light Power Supply 1600 Watt 9566-000 50A - 70A 65A @ 24V 100,000,000 5.5
Shown With Remote Distant Fig. 9512-000 (220V)
Electric Control Base * 300W and 500W lamps shown as replacements on VARO 300W and 500W Searchlights only—
or 9514-000 (440V)
Not used on 9854 Series Searchlights.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0129-04 4/26/06 3:45 PM Page 1

133-06

PHOENIX PRODUCTS CO., INC.

MRSE Series Heavy-Duty Floodlight


A hazardous-rated, heavy-duty floodlight suitable for the harshest marine environments.
Designed to absorb shock and vibrations, and manufactured with all marine-grade components.
Configured to accept all High Pressure Sodium, Metal Halide or Mercury Vapor lamps from
250W - 1000W. Unique lamp isolation system consisting of lamp stabilizer and multiplane
“free-floating” lamp diaphragm assembly assures complete lamp isolation for extended lamp life.
Copper-free cast aluminum housing with thermoset polyester powder-coat finish. Reinforced mounting
bracket. Gasketed socket assembly is removable for easy access to lamp. Silicone gasket and
aluminum lens frame seal the optical assembly. Stainless Steel exterior hardware. Optical systems
include very narrow, narrow, wide, or very wide bat wing beam patterns.
Marine and Hazardous Location rated, shock and vibration-resistant ballast available.
Ballasts are ordered separately.
250/400 1000 Meets UL standard 1598-A (Marine Fixture Outside Type – Saltwater).
Fixture Weight
48 lbs 64 lbs Meets UL Standard 844 for Hazardous Location, Class 1 Div. 2. “T-Rating” – T1.

Ballast to be ordered separately


Remote Ballast Wattage Dimensions Weight (60hz) Description Wattage Lamp Type Photometric Data (NEMA Rating/Max Candlepower)
Description A (narrow) B (wide) C (v. narrow) D (v. wide)
250 22.5 lbs 250 ED-18 3x5/47,905 6x5/25,041 1x4/82,578 6x5/14,106
High Pressure High Pressure
400 25.0 lbs 400 ED-18 3x5/83,222 6x5/42,229 1x5/138,824 6x5/22,504
Sodium Sodium
1000 ALL 39.5 lbs 1000 E-25 6x5/128,669 6x6/90,094 1x5/481,469 6x5/156,989
250 12” Long x 21.5 lbs 250 ED-28 3x5/29,287 6x5/23,757 2x5/49,939 7x5/9,393
Metal Halide 400 7.5” Wide x 23.0 lbs Metal Halide 400 ED-37 3x5/45,832 6x5/37,138 2x5/78,151 6x5/11,476
1000 5.6” Deep 32.5 lbs 1000 BT-56 6x5/115,182 6x6/77,788 1x5/264,862 6x5/19,642
400 22.0 lbs 400 E-37 2x5/38,645 4x5/20,074 1x5/60,704 7x5/6,063
Mercury Vapor Mercury Vapor
1000 36.5 lbs 1000 BT-56 6x6/48,470 6x6/34,367 1x5/141,584 6x6/22,489

MSD250MH Heavy Duty Floodlights


shown

Low Wattage Floodlight Heavy Duty Floodlight


Wiring: NPSI tapped hole for 1/2” conduit. Wiring: 1/2” NPSI tapped hole provided for
Dimensions: 6-9/10” (17.5 cm) W, 9-3/4” connections with Class 1 Division 2 methods defined
(24.8 cm) H, 11-3/5” (29.4 cm) D. the NEC.
Weight: 10.5 - 12.2 lbs. (4.8 - 5.5 kg). Dimensions: 6-9/10” (17.5 cm) W, 14-1/2”
Compliances: UL listed; CSA Certified. (36.8 cm) H, 14-2/3” (37.0 cm) D
1598-A Marine Outside Type, U.S. Coast Weight: 25 - 33 lbs. (11.2 -15 kg).
Guard Accepted, 1572 Outside Wet Compliances: UL listed; CSA Certified.
Location Type 844 Hazardous Location (Class 1 Division 2; Groups
MODEL NUMBER
ABCD), 1598-A Marine Outside Type, U.S. Coast
Low Wattage Floodlights Guard Accepted, 1572 Outside Wet location Type
MSD70MH MSD50HPS
MSD70HPS
Low Wattage Floodlights: accept medium screw base
MSD100HPS
metal halide or high pressure sodium lamps.
MSD150HPS
Heavy Duty Floodlights Heavy Duty Floodlights: accept ED-18 HPS and
MSD250MH-480V MSD200HPS-480V ED-18 mogul screw base metal halide lamps.
MSD250MH-QV MSD200HPS-QV
Heavy Duty Floodlights Feature:
MSD400MH-347V MSD250HPS-480V • Integral ballast
MSD400MH-480V MSD250HPS-QV • Thermoset, powder-coated finish
MSD400MH-QV MSD400-347V • Copper-free aluminum housing
MSD400HPS-480V • UL 1598-A listed
MSD400HPS-QV • 60 Hz, 120V (unless otherwise noted)

See our page BECK ELECTRIC SUPPLY HARBOR SHIP ELECTRIC – Wilmington, CA (310) 834-1151
in the Seattle, WA (206) 763-2011 MANNING ELECTRIC, INC. – Brooklyn, NY (718) 832-2488
Advertising Section Richmond, CA (510) 215-9499 ARGO INTERNATIONAL – New York, NY (212) 431-1700
REILY ELECTRICAL SUPPLY POTTER ELECTRIC – National City, CA (619) 474-8171
Metairie, LA (504) 835-8888 ELECTRICAL EQUIPMENT CO. – Norfolk, VA (757) 857-1100
www.phoenixproducts.com 8711 W. Port Avenue, Milwaukee, WI 53224 USA • Tel: (414) 973-3300 • Fax: (414) 973-3210 • E-Mail: marketing@phoenixproducts.com
0130-05 4/26/06 3:47 PM Page 130

134-06

PHOENIX PRODUCTS CO., INC.


Floodlights and Searchlights
Floodlights and Searchlights Feature:
• Captive hardware - No tools needed
• Marine grade aluminum housing
• Shock- and vibration-resistant
• Thermoset powder-coated finish to withstand harsh weather
• Lamp diaphragm absorbs shock
• Borosilicate glass lens provides superior thermal shock resistance
• Black gasket reduces backlight to preserve night vision
Model MRS64/1000

MODEL NUMBER
Uses PAR 64 mogul end prong halogen or
MRS64/1000 Clear Lens incandescent lamps.
MRS64/1000-RL Red Lens
MRS64/1000-YL Amber Lens Wiring: 4’ (1.2 m) long, 3-conductor heavy duty
MRS64/1000-SL Searchlight Handle SEO cord.
Dimensions: 14” (35.6 cm) Wide
Accessories Coupling/Torque Tube Kits 17-5/8” (44.8 cm) High
GL-R Glass Cover Lens - Red TTK-8 8” Kit 11” (27.9 cm) Deep
WG-4 Wire Lens Guard TTK-16 16” Kit Weight: 22 - 35 lbs (10 - 15.9 kg)
TLK Twist Lever Kit TTK-24 24” Kit Compliances: UL listed; CSA Certified.
HWK Hand Wheel Kit TTK-32 32” Kit 1598-A Marine Outside Type
LK Lever Kit EK Extension Kit U.S. Coast Guard Accepted
PK Pedestal Kit Floodlights: 1571 Suitable for Wet Locations

Lamp Performance Information


Beam NEMA Max. Beam
Lamp Pattern Rating Candlepower
1000W PAR 64 Wide Flood 5x3 37,576
Halogen Medium Flood 4x2 81,958
Narrow Spot 3x1 165,145
Very Narrow Spot 2x1 450,000
500W PAR 65 Wide Flood 4x3 15,292
Incandescent Medium Flood 3x2 38,600

Model MRS64/1000-SL shown


with Lever Kit Assembly.

www.manning-electric.com
Stocking Distributor for
Phoenix Products Company
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0131-04 4/26/06 3:48 PM Page 1

135-06

PHOENIX PRODUCTS CO., INC.


Hazardous Location Floodlights
Hazardous Location Floodlights Feature:
• Dual Listed: UL 844 & 1598-A
• Captive hardware - No tools needed
• Marine grade aluminum housing
• Thermoset powder-coated finish to withstand harsh weather
• Lamp diaphragm absorbs shock
• Black gasket reduces backlight to preserve night vision

Model MRS56/500H-SRL shown


with Searchlight Handle.

Uses PAR 56 mogul end prong halogen or incandescent lamps


MODEL NUMBER or R-60 mercury vapor lamps.
Wiring: Splice box with 3/4” NPT tapped hole provided for
MRS56/500H-SRL Searchlight Handle
connections with metal conduit, flexible metal conduit, or flexible
MRS56/500 Clear Lens
cord in compliance with Class 1 Division 2 methods defined in
MRS56/500-RL Red Lens
the NEC.
MRS56/500-YL Amber Lens
Dimensions: 14” (35.6 cm) Wide
MRS60/400H*
17-1/2” (44.5 cm) High
*Remote Ballast Required
11” (27.9 cm) Deep or (INC)
Remote Ballasts 14-3/8” (36.5 cm) Deep (MV).
Accessories (Mercury Vapor Fixtures) Weight: 22 - 35 lbs (10 - 11.3 kg)
GL-R Glass Cover Lens - Red 1-400MV-15 480V Compliances: UL listed; CSA Certified.
WG-4 Wire Lens Guard 1-400MV-10 QV 844 Hazardous Location, Suitable for Wet
GL-Y Glass Cover Lens - Amber 1-400MV-50 50 Hz Locations, Class 1 Division 2
1598-A Marine Outside Type
U.S. Coast Guard Accepted

Lamp Performance Information


Beam NEMA Max. Beam
Lamp Pattern Rating Candlepower
300W INC Wide Flood 4x3 7,359
Incandescent Medium Flood 3x2 25,638
Narrow Spot 2x2 56,007
500W INC Medium Flood 3x2 47,163
Halogen Wide Flood 5x3 14,693
Narrow Spot 3x1 96,112

Model MRS56/500 shown.

BECK ELECTRIC
SUPPLY Wilmington, California
Phone: 310-834-1151
Fax: 310-834-1208
Richmond, California
Phone: 510-215-9499
Fax: 510-215-7889
Seattle, Washington
Phone: 206-763-2011
Fax: 206-767-9219
www.beckelectric.com E-mail: socalsales@beckelectric.com E-mail: casales@beckelectric.com E-mail: wasales@beckelectric.com
3071 - 04 4/26/06 3:49 PM Page 1

136-06

PHOENIX PRODUCTS CO., INC.

MSR SERIES FLOODLIGHT

A heavy-duty floodlight suitable for harsh marine environments where corrosion resistance and durability are
demanded. Applications include hull-perimeter security lighting.

Specifications
Housings: Heavy-wall, low copper content, ribbed
extruded aluminum housings for greater strength and
corrosion resistance.

Hardware: All external hardware is stainless steel for


superior corrosion resistance.

Socket: Lamp grid socket keeps lamp firmly in place,


prolonging lamp life.

Lens: Tempered glass lens to resist heat and thermal


shock.

Gasket: Silicone gasket for watertight seal.

Door Assembly: Captive, side-entry door allows for easy


access to lamp chamber.

Watt/Type (Lamp NOT included) Reflector: Hammer-tone aluminum reflector provides a


400HPS = 400 watt High Pressure Sodium (ET-18) powerful efficient beam spread. Bat-wing pattern provides
1000HPS = 1000 watt High Pressure Sodium (ET-25) a uniform distribution of light over a wide area.
Voltage Options
QV = 120, 208, 240, 277V Finish: Thermoset, powder-coated finish resists corrosion.
480V = 480 Volt
Ballast: Marine rated external ballast extends electrical
Mounting options component life by reducing operating temperature.
TMH = Tenon Mount - Horizontal Lamp
PMH = Plate Mount - Horizontal Lamp Mounting: Versatile mounting options include tenion
SMH = Surface Mount - Horizontal Lamp mount, plate mount, and surface mount.

Compliances
Series Watt/Type Voltage Mounting UL Listed - Standard 1598A
example: Marine Outside Type (Saltwater)
MSR 400HPS QV TMH

Indoor/Outdoor
MSR 400HPS QV TMH
1000HPS 480V PMH Enclosure Type 4
SMH
Meets US Coast Guard Requirements

See our page BECK ELECTRIC SUPPLY HARBOR SHIP ELECTRIC – Wilmington, CA (310) 834-1151
in the Seattle, WA (206) 763-2011 MANNING ELECTRIC, INC. – Brooklyn, NY (718) 832-2488
Advertising Section Richmond, CA (510) 215-9499 ARGO INTERNATIONAL – New York, NY (212) 431-1700
REILY ELECTRICAL SUPPLY POTTER ELECTRIC – National City, CA (619) 474-8171
Metairie, LA (504) 835-8888 ELECTRICAL EQUIPMENT CO. – Norfolk, VA (757) 857-1100
www.phoenixproducts.com 8711 W. Port Avenue, Milwaukee, WI 53224 USA • Tel: (414) 973-3300 • Fax: (414) 973-3210 • E-Mail: marketing@phoenixproducts.com
0133-03 4/26/06 3:50 PM Page 1

137-06

OCEANIC ELECTRICAL MFG. CO., INC.


WATERTIGHT LIGHTING FIXTURES
60-150 Watt – Bulkhead Mounting 60 & 100 Watt Bulkhead Mount
Cast bronze or cast aluminum. with or without Switches
Globes: Clear screw type. Frosted & colored optional. Max. Catalog No. Replacement
Description
Lampholders: #684A1 Watts Bronze Aluminum Globe Guard
Standard Fixture 915-B 915-A
Outlets: Boxes furnished blank unless otherwise specified.
60 w/ 4-Wire Connection Block 915-BC 915-AC
500 516
Watt w/ Rubber Boot Toggle Switch 915-BSW 915-ASW
Catalog No. Replacement w/ Conn. Block & Tog. Switch 915-BCSW 915-ACSW
Max. Description
Watts Cast Cast Globe Guard Standard Fixture 916-B 916-A
Bronze Aluminum
100 w/ 4-Wire Connection Block 916-BC 916-AC
Standard Fixture 5950-B 5950-A 600 517
60 Watt w/ Rubber Boot Toggle Switch 916-BSW 916-ASW
w/ 4-Wire Connection Block 5950-BC 5950-AC 500 516 916-BC
Watt w/ Conn. Block & Tog. Switch 916-BCSW 916-ACSW
w/ Half Shield 5950-BS 5950-AS
w/ Conn. Block & Half-Shield 5950-BCS 5950-ACS
Cast Bronze. (For cast aluminum, add suffix
Standard Fixture 5951-B 5951-A
100 w/ 4-Wire Connection Block 5951-BC 5951-AC
letter “A” to catalog number.)
600 517 5951-BC
Watt w/ Half Shield 5951-BS 5951-AS Globes: Clear screw type. Frosted or colored optional.
w/ Conn. Block & Half-Shield 5951-BCS 5951-ACS
Standard Fixture 5952-B 5952-A
Connection Block: Suffix letter “C” after catalog number
150 w/ 4-Wire Connection Block 5952-BC 5952-AC 700 518 indicates 4-wire connection block is included.
Watt w/ Half Shield 5952-BS 5952-AS Junction Box: #3111 4” diameter four-way drilling and
w/ Conn. Block & Half-Shield 5952-BCS 5952-ACS
tapping as indicated. (1-3/4” inside diam.; 1” maximum IPS).
Also available with #2900 square box.
Junction Box: #3111 (inside depth 1-3/4”; Max. 1” IPS outlet; 4” diam.).
Suitable for 4-way drilling & tapping. Outlet: Boxes furnished blank unless otherwise specified.
Half Shield: Available by adding suffix letter “S” to catalog number. Lampholder: #684A1
Switch: Available with rubber boot type toggle switch by adding
suffix letters “SW” to catalog number.

Max. Catalog No. Replacement


Description
Watts Bronze Aluminum Globe Guard
60 Standard Fixture (Includes Thru Bulkhead Mounting
6950-B 6950-A 500 516
Watt 4-Wire Connection Block) These fixtures are intended for inside
Standard Fixture (Includes
100
Watt 4-Wire Connection Block)
6951-B 6951-A 600 517 or outside locations where it is desirable to be
150 Standard Fixture (Includes
wired from behind the bulkhead, eliminating
Watt 4-Wire Connection Block)
6952-B 6952-A 700 518 6951 electric cables on bulkhead side of fixture.
Outlet: Max. IPS 1” Four-way.
5961
Junction Box: #2900 square type permitting two Lampholder: #684A1
3/4” max. outlets or one 1-1/4” outlet per side.
Connection Block: Two-wire.
Includes 4-wire connection block.
Max. Catalog No. Replacement Junction Box
Watts Bronze Aluminum Globe Guard Cat. No. Depth

Catalog No. Replacement 60 5960-B 5960-A 500 516 2950 2-3/8”


Max.
Description 100 5961-B 5961-A 600 517 2950 2-3/8”
Watts Bronze Aluminum Globe Guard
60 5962-B 5962-A 500 516 2951 3-3/8”
Standard Fixture 961-B 961-A
100 5963-B 5963-A 600 517 2951 3-3/8”
w/ 4-Wire Connection Block 961-BC 961-AC
60
w/ Rubber Boot Toggle Switch 961-BSW 961-ASW 500 516
Watt
w/ 4-Wire Conn. Block &
Toggle Switch 961-BCSW 961-ACSW
40 Watt – Cast Bronze – Keyless
Standard Fixture 962-B 962-A
Finish: Natural bronze.
w/ 4-Wire Connection Block 962-BC 962-AC
100
w/ Rubber Boot Toggle Switch 962-BSW 962-ASW 600 517 Globe: Screw type clear.
Watt
w/ 4-Wire Conn. Block 961-B Connection Block: Suffix letter “C” after cat.
Toggle Switch 962-BCSW 962-ACSW

Standard Fixture 963-B 963-A


no. indicates 4-wire block is included. 921-BC
150
w/ 4-Wire Connection Block 963-BC 963-AC Junction Box: #3111 standard. 4” dia. 4-way
700 518
Watt
w/ Rubber Boot Toggle Switch 963-BSW 963-ASW drilling and tapping as indicated. 1-3/4”inside
w/ 4-Wire Conn. Block &
Toggle Switch 963-BCSW 963-ACSW depth; 1” IPS. #2900 square box optional.
Outlet: Furnished blank unless otherwise specified.
Junction Box: Standard 4” diam. 4-way drilling & tapping as indicated. Shield: Cast bronze. Adjustable for locking in position
Also available with #2900 square box. with threaded ring and knurled screw.
Switch: Available with rubber boot toggle switch by adding suffix letters
With Without Replacement
“SW” to catalog number. Description
Shield Shield Socket Globe
Connection Block: Suffix letter “C” Standard Fixture 921-B 760 684 A1 500
after catalog number indicates 4-wire connection block is included. w/4-Wire Connection Block 921-BC 761-C 684 A1 500

PORT MARINE OF CALIFORNIA


1982 Gladwick St.
Rancho Dominguez, CA 90220
Tel: 310-631-5657 • Fax: 310-631-5759
E-mail: portmarine@earthlink.net
Complete Line of European & American Electrical Equipment Including Oceanic Fixtures & Parts
136 4/27/06 5:16 PM Page 1

138-06

OCEANIC ELECTRICAL MFG. CO., INC.


WATERTIGHT LIGHTING FIXTURES
Cast Bronze or Cast Aluminum
Globes: Clear screw type. Frosted or colored optional. Lampholder: No. 684-A1

Ceiling or Deck Mounting Pendent Type Fixtures


60 - 200 Watt 60 - 200 Watt
Junction Box: #3111 - 4” diameter suitable Approved only when used with suitable
for 4-way drilling & tapping as indicated. pipe stem and box or gooseneck.
(1-3/4” inside depth; 1” IPS) Outlet: Furnished drilled and tapped
Outlet: Boxes furnished blank unless 1/2” top only.
806-BC
otherwise specified.
Max. Catalog No. Replacement
Watts Bronze Aluminum Globe Guard
Max. Catalog No. Replacement 60 810-B 810-A 500 516
Description
Watts Bronze Aluminum Globe Guard 100 812-B 812-A 600 517 812-B
Standard Fixture 805-B 805-A
60 500 516 150 1812-B 1812-A 700 518
w/4-wire connection block 805-BC 805-AC
200 2812-B 2812-A 1620 1265*
Standard Fixture 806-B 806-A
100 600 517
w/4-wire connection block 806-BC 806-AC
Standard Fixture 1806-B 1806-A
150
w/4-wire connection block 1806-BC 1806-AC
700 518
Bulkhead Mount
Standard Fixture 2806-B 2806-A 60 - 200 Watt
200 1620 1265*
w/4-wire connection block 2806-BC 2806-AC Junction Box: #3111 (1-3/4” inside
depth; 1” IPS outlet).
Junction Box: #2900 - Square type permitting Connection Block: 4-wire blocks
two 3/4” outlets or one 1-1/4” outlet per side. standard. 6-wire blocks optional. 814-BC
Includes 4-wire connection block.
Max. Catalog No. Replacement
Outlet: Boxes furnished blank unless Description
Watts Bronze Aluminum Globe Guard
otherwise specified.
Fixture w/4-Wire Conn. Block 813-B 813-A
60 500 516
Max. Catalog No. Replacement w/6-Wire Connection Block 813-BC 813-AC
Watts Bronze Aluminum Globe Guard Fixture w/4-Wire Conn. Block 814-B 814-A
100 600 517
w/6-Wire Connection Block 814-BC 814-AC
60 6805 6805-A 500 516
150 Fixture w/4-Wire Conn. Block 1814-B 1814-A 700 518
100 6806 6806-A 600 517 Fixture w/4-Wire Conn. Block 2814-B 2814-A
200 1620 1265*
150 6807 6807-A 600 518 w/6-Wire Connection Block 2814-BC 2814-AC
200 6808 6808-A 1620 1265*
6806 Ceiling or Deck Mount
Short Type Fixtures 40 Watt
60 - 100 Watt Furnished with deep junction box
Outlet: 3/4” max. IPS and connection blocks.
furnished blank unless Finish: Natural. Fixture body
otherwise specified. machined and polished.
Globes: Inside frosted standard.
Max. Catalog No. Outlets: #3111 Junction box
Watts Bronze Aluminum may be drilled & tapped.
CEILING TYPE Max. 1” IPS. 4-way. Blank
60 401 401-A
unless otherwise specified.
376-MC
Lampholder: #687
100 403 403-A
BULKHEAD TYPE 401-403 Catalog Replacement Globe
Lamps
60 402 402-A No. Size Type No.
100 404 404-A 401-403 374-MC 1 - 40 watt 6” Bowl 316
376-MC 2 - 40 watt 8” Bowl 319
* 200 watt fixtures normally furnished with steel wire guards, cadmium plated, with
bronze threaded base ring.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0135-04 4/27/06 5:17 PM Page 1

139-06

OCEANIC ELECTRICAL MFG. CO., INC.


WATERTIGHT LIGHTING FIXTURES
100 - 200 Watt – Cast Bronze or Cast Aluminum

REFLECTOR TYPE – DECK


Lamp
Max. Catalog No. Replacement
Watts Description Bronze Alum. Globe Guard Reflector
With 30° Angle Reflector
100 Standard Lamp 1960-B 1960-A 600 517 1905
Lamp w/4-Wire Conn. Block 1960-BC 1960-AC 600 517 1905
150 Standard Lamp 1961-B 1961-A 700 518 1905
1960-BC 2010-BC Lamp w/4-Wire Conn. Block 1961-BC 1961-AC 700 518 1905
200 Standard Lamp 1962-B 1962-A 1620 1265* 1907
Junction Box: #3111 - Standard 4” diam. (1-3/4” depth; 1” Lamp w/4-Wire Conn. Block 1962-BC 1962-AC 1620 1265* 1907
max. IPS outlet ). #2900 square box optional. With Shallow Dome Reflector
Outlets: Suitable for drilling and tapping. Four-way as 100 Standard Lamp 2010-B 2010-A 600 517 2020
indicated. Lamp w/4-Wire Conn. Block 2010-BC 2010-AC 600 517 2020
Finish: Natural bronze or aluminum. 150 Standard Lamp 2011-B 2011-A 700 518 2020
Reflector: White inside and outside. Lamp w/4-Wire Conn. Block 2011-BC 2011-AC 700 518 2020
Globes: Screw type, clear. For inside frosted and colored 200 Standard Lamp 2012-B 2012-A 1620 1265* 2022
globes, see glassware page later in this section. Lamp w/4-Wire Conn. Block 2012-BC 2012-AC 1620 1265* 2022
Lampholder: #684A1
* 200 watt fixtures normally furnished with steel wire guards, cadmium plated, with bronze threaded base ring.

REFLECTOR TYPE – PENDENT


Lamp
Max. Catalog No. Replacement
Watts Description Bronze Alum. Globe Guard Reflector
With 30° Angle Reflector
100 Standard Lamp 1950-B 1950-A 600 517 1905
Lamp w/4-Wire Conn. Block 1950-BC 1950-AC 600 517 1905
150 Standard Lamp 1951-B 1951-A 700 518 1905
Lamp w/4-Wire Conn. Block 1951-BC 1951-AC 700 518 1905
1950 2000
200 Standard Lamp 1952-B 1952-A 1620 1265* 1907
Outlets: Suitable for drilling and tapping. Max. 1/2” on top. Lamp w/4-Wire Conn. Block 1952-BC 1952-AC 1620 1265* 1907
Finish: Natural bronze or aluminum. With Shallow Dome Reflector
Reflector: White inside and outside. 100 Standard Lamp 2000-B 2000-A 600 517 2020
Globes: Screw type, clear. For inside frosted and colored Lamp w/4-Wire Conn. Block 2000-BC 2000-AC 600 517 2020
globes, see glassware page later in this section. 150 Standard Lamp 2001-B 2001-A 700 518 2020
Lampholder: #684A1 Lamp w/4-Wire Conn. Block 2001-BC 2001-AC 700 518 2020
Note: These units may be approved when used with suitable pipe stem and box 200 Standard Lamp 2002-B 2002-A 1620 1265* 2022
or goosenecks with box. Lamp w/4-Wire Conn. Block 2002-BC 2002-AC 1620 1265* 2022
* 200 watt fixtures normally furnished with steel wire guards, cadmium plated, with bronze threaded base ring.

CARGO HOLD FIXTURES – 100 Watt


Furnished complete with connection block.
Outlet: May be drilled and tapped. Max. 1” IPS 4-way.
Furnished blank unless otherwise specified.
Finish: Natural
Globe: #330 heat-resisting clear.
Cat. No. Style Material Diameter Depth
849 Wing-Nut Bronze 10-1/2" 5"
850 Wing-Nut Aluminum 10-1/2" 5"
849
3851 3851 Key-Lock Bronze 10-3/4" 5"
3850 Key-Lock Aluminum 10-3/4" 5"

4560 W. 34th St., Suite E


HOUSTON, TEXAS 77092
LIGHTING & ELECTRICAL Ph: 713-681-8753 • Fax: 713-681-2865
CONCH 1-800-999-0924
PRODUCTS
E-Mail: sales@conchcompany.com
www.conchcompany.com
0136-04 4/27/06 5:18 PM Page 1

140-06

OCEANIC ELECTRICAL MFG. CO., INC.

PORTABLE CARGO LIGHTS


PORTABLE GANGWAY LIGHTS Aluminum - Maximum 500 Watt
Watertight - 100 - 200 Watt
Cast Bronze 2203

Finish: Natural
Reflector: White inside and outside.
Globe: Screw type clear.
Lampholder: #684A1 Listed by Underwriters’ Laboratories, Inc.
File No. E35347
Guard: Cast bronze.

Dimensions: 15” diam. x 15”


Max. Catalog Reflector Replacement high (less handle). 1533
Watts No. No. Diam. Globe Guard Male Plugs: Non-watertight standard; watertight optional.
100 2203 2020 12” 600 517 Ball Handle: Cadmium plated steel.
150 2204 2020 12” 700 518
Cover: Cast aluminum alloy.
200 2205 2022 16” 1620 1265*
Lampholder: #1710, rated 200° C.
Cable: #18 AWG, 3-cond. EZC yellow S. O. neoprene.
Reflector: 14-gauge aluminum alloy. Vented.
Guard: 3/4” diameter zinc-plated steel. Permanently riveted
PORTABLE HAND LIGHTS to reflector.
Watertight - 60 - 200 Watt
Relamp: Large center opening in guard to accommodate
Cast Bronze or Cast Aluminum
500-watt mogul base lamps. Lamps not included.
Finish: Natural bronze.
Globe: Screw type clear. Frosted and colored
globes optional. (See glassware.) 3-Wire Single Unit Mogul Base Lampholder
Lampholder: #684A1 Provided with grounding screw, connection box and
3-Wire grounding type. watertight strain relief cable fitting.
Cat. No. Description
Max. Catalog No. Dimensions Replacement
1531 Cargo Light w/25 ft. 3-cond. cable
Watts Bronze Alum. Diam. Length Globe Guard
1532 Cargo Light w/50 ft. 3-cond. cable
60 2242 2242-A 4-1/2” 14-1/2” 500 516-H
1533 Cargo Light w/75 ft. 3-cond. cable
100 2244 2244-A 4-1/2” 15-1/2” 600 517-H
2244 1534 Cargo Light w/100 ft. 3-cond. cable
200 2247 2247-A 6-1/4” 17” 1620 1265

HALYARD LIGHTS LIGHTING FIXTURE


Watertight - Cast Bronze GUARDS
100 Watt Cast Bronze -
Finish: Natural Bronze. Cast Aluminum
Globe: Screw type.
Lampholder: #684A1 Note: Finished in
natural bronze. For
Outlet: Maximum 1/2” IPS. Watertight packing aluminum, add “A”
gland included. after catalog number.

Catalog Globe Dimensions Replacement Inside


Cat. No. Watts Length Diameter
No. Color Diam. Length Globe of Thread
BRASS HALF SHIELDS 510 60 5-1/2" 3-7/16"
2210 Clear 4-1/4” 12” O.A. 600
Guard 511 100 6-1/2" 3-7/16"
2211 Red 4-1/4” 12” O.A. 602 Cat. No. Description
Size 512 150 7-1/2" 3-7/16"
2212 Green 4-1/4” 12” O.A. 603 Coarse Thread - 8 Threads Per Inch
2210 205 60 Watt 6"
2213 Blue 4-1/4” 12” O.A. 604 516 60 5-1/2" 3-7/16"
206 100 Watt 6"
517 100 6-1/2" 3-7/16"
* 200 watt fixtures normally furnished with steel 207 150 Watt 8"
518 150 7-1/2"
wire guards, cadmium plated, with bronze Note: Finished in natural bronze.
threaded base ring. ROUND WIRE GUARDS
For aluminum, add “A” after
catalog number. 1265 200 9-1/2" 5-1/32"

290 Murray Street 3726 Parker Street


Cambridge Montreal, QC H3C 2E2 Burnaby, BC V5C 3B1
Canada Canada
Agencies Telephone: (514) 875-5700 Telephone: (604) 205-0057
Limited Fax: (514) 875 8638 Fax: (604) 205-0027
Toll Free: 1-877-875-0057
Please see our ad in the Advertising Section E-mail: info@cambridgeagencies.com
0137-03 4/26/06 8:34 PM Page 1

141-06

OCEANIC ELECTRICAL MFG. CO., INC.


WATERTIGHT FRESNEL LIGHTS
COMBINATION BLINKER & LOADING LIGHTS
Cast Bronze - 60/100 Watt
MAST LIGHTS Red/Clear
Cast Bronze
100 Watt
Finish: Natural
Globe: Flared lip
typefresnel. 839
Colors optional.
(See glassware.)
Lampholder: #4836
Cat. No. Lens Color Type Height Globe
839 Clear Deck 11” 53091
841
839-R Ruby Deck 11” 53092 1836
2816
841 Clear Pendent 11” 53091 2815
841-R Ruby Pendent 11” 53092 Globes: Top-#502 red screw type; Bottom-#57071 clear.
Lampholder: Medium screw base standard.
Outlet: Max. 1” IPS. Furnished blank unless otherwise specified.
REPLACEMENT GLASSWARE
For Lighting Fixtures - Screw Thread Type Catalog Lamps Type of Dimensions
No. Top Bottom Mounting Height Diam.
1836 1 - 60 watt 1 - 100 watt Pendent 15-1/2” 5-3/4”
2815 1 - 60 watt 1 - 100 watt Deck 16” 5-3/4”
2816 1 - 60 watt 1 - 100 watt Mast 18” 5-3/4”

57071 53091
Fresnel Flared Lip Type Regulation Fresnel Lenses BLINKER TELEGRAPH LIGHTS
Type “F” - 100 Watt 360° - 6" Dia. Cast Bronze
Size 4-5/8" Dia. x 6-1/2" High Cat. No. Description 100 Watt
Cat. No. Description 57071 Clear
53091 Clear 57072 Ruby
53092 Ruby 57073 Green
53094 Green 57074 Blue
53095 Blue 57075 Amber

ANCHOR & BOOM


LIGHTS 836 838 840
Watertight - Cast Bronze Cat. Type of Dimensions Replacement
100 Watt Lens
No. Mount Height Diam. Globe
Finish: Natural bronze. 836 6” Clear Pendent 9-1/4” 5-3/4” 57071
Globe: Flared lip type as 836-R 6” Red Pendent 9-1/4” 5-3/4” 57072
indicated. 910
838 6” Clear Deck 10” 5-3/4” 57071
Lampholder: #4836 standard.
Note: Base is drilled with 6-3/8” 838-R 6” Red Deck 10” 5-3/4” 57072
bolt holes on a 5” diameter circle. 840 6” Clear Staff 13” 5-3/4” 57071
Mounting: Steel staff or boom. 840-R 6” Red Staff 13” 5-3/4” 57072
Cat. No. Globe Color Dimensions Globe
Finish: Natural bronze.
910 Frosted 6” Diam. x 9” Ht. 317
Globe: Fresnel. Other colors optional.
910-R Ruby 6” Diam. x 9” Ht. 317-R
Lampholder: Medium screw base standard.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0138-03 4/26/06 8:35 PM Page 1

142-06

OCEANIC ELECTRICAL MFG. CO., INC.


FLEXIBLE ARM LAMPS

REPLACEMENT GLASSWARE
For Lighting Fixtures - Screw Thread Type

4911

4900-MC
For Chart Room Mounting
Minimum wall space required. Swing joint has knurled thumb
screw to permit locking in any position on 180° arc. 30” 317
overall length. 330
4911 - Adjustable tubular shade, key switch, cast bronze
mounting box and swing joint.
4900 - Parabola shade, key switch, cast bronze mounting box
and swivel joint.
4900-MC - Same as 4900, but with ground terminal and
3-conductor cable. 42

WALL BRACKET LIGHTS 319


Non-Watertight - 40 Watt
Adjustable shades.

6686 6685

Cat. No. Description


6685 Bracket type with pull switch
6686 Chronometer light with key switch 600 1644

Cat. No. Description


42 Ball Type - Frosted - 4-1/4" Dia. Ball, 3-5/16" Fitter
316 Bowl Type Globe - Frosted - 6" Dia. x 2-3/4" High
317 Frosted - 4-1/2" Dia. Flange x 5" High
319 Bowl Type Globe - Frosted - 8" Dia. x 3" High
330 Hold Light - Clear - 8-1/4" Dia. x 1-3/4" High
1644 2-1/4" Dia. Fitter x 5" Long

4920

3-1/4" Dia. 4-1/4" 4-3/4"


Overthread O.D. O.D.
4930 5" 6" 7" 8-1/4" 9"
Color
Long Long Long Long Long
Cat. No.
Clear 500 600 700 1100 1620
For Machine & Typewriter Mounting Ruby 502 602 702 – –
4920 - Parabola shade, key switch, cast bronze bolt mounting Green 503 603 703 – –
Blue 504 604 704 – –
piece. Overall length 20”.
Amber 508 605 705 – –
For Desk
4930 - Parabola shade, brass lampholder, cast bronze base with
toggle switch.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0139-03 4/26/06 8:36 PM Page 1

143-06

OCEANIC ELECTRICAL MFG. CO., INC.


GAUGE ILLUMINATOR SWITCHES AND RECEPTACLES
LIGHTS Watertight - Polarized - Cast Bronze
Watertight 10 Amp, 250 Volts - 20 Amp, 125 Volts
Cast Bronze w/Brass Reflector Finish: Natural bronze.
Plugs: Not included with receptacles.
Finish: Natural bronze. Outlets: Max. 1” IPS straight through.
Outlet: Pendent type suitable for Furnished blank unless otherwise
mounting on pipe stem and box. specified.
Lamps: Suitable for T8 or T10 lamps.
Lampholder: Medium screw base.

Cat. No. Description Length


292 Box Type 12”
290 Pendent 12” 292 290
294 Glass Cylinder Only 10”
209

INDICATOR LIGHTS Straight


Watertight – Cast Bronze Catalog Numbers Dimensions
Type
Finish: Natural bronze. 2 Wire/3 Pole 3 Wire/2 Pole L W H
Outlet: Max. 3/4” IPS. Furnished 209 259 5” 3-1/4” 4” Single Gang
blank unless otherwise specified. 214 264 6-3/4” 3-1/4” 4” Two Gang
Lampholder: #216P standard.
246 265 8-3/8” 3-1/4” 4” Three Gang
Suitable for 6 watt candelabra
base lamps. Replacement Parts
Globes: #19 green globe standard. 2101 Cat. Nos.
Green, blue and amber optional. Description
2W/3P 3W/4P
Description
Cat. No. Lights Plug Complete 250 255
L W H
Receptacle Interior 251 256
2101 4-1/2” 3-3/4” 3-1/8” One
2102 4-1/2” 3-3/4” 3-1/8” Two
2103 8” 4” 2-1/2” Three
2104 5-5/8” 4-1/4” 2-3/4” Four

COMBINATION SWITCH
AND INDICATOR LIGHTS
Watertight – Cast Bronze
2 Wire – 125 Volts
Single Pole 219
Finish: Natural bronze. Combination
3832
Outlet: Max. 3/4” IPS straight through.
Dimensions Cat. Nos.
Furnished blank unless otherwise specified. Switch Recept.
Lampholder: #216P standard. Suitable for L W H 2W/3P 3W/4P
6 watt candelabra base lamps. Name Double Pole Single 6-3/4” 3-1/4” 4” 219 269
plates available (please specify). Double Pole Duplex 8-3/8” 3-1/4” 4” 229 279
Globe: #19 green globe standard.
Green, blue and amber optional.
Switches: 871 DP standard. Replacement Parts
Dimensions Plug Switch Interior
Cat. No. Description Description
L W H 3830 2W/3P 3W/4P Double

3830 4-1/2” 3-3/4” 3-1/8” One Gang 250 255 871

3832 7” 5-1/2” 3-1/2” Two Gang

Available through
PORT ELECTRIC SUPPLY CORP.
248-256 Third Street • Elizabeth, NJ 07206
Tel: (908) 355-1900 • Fax: (908) 355-0041
Oceanic Electrical Mfg. Co., Inc.
Elizabeth, New Jersey e-mail: pe1901@mindspring.com
0140-04 4/26/06 8:37 PM Page 1

144-06

OCEANIC ELECTRICAL MFG. CO., INC.


WATERTIGHT SWITCHES AND RECEPTACLES

POLARIZED – ANGLE TYPE

Finish: Natural bronze or aluminum.


Outlets: Maximum 3/4” IPS. Furnished blank unless otherwise
specified.
Plugs: Not included with receptacles.

Catalog No. Box Dimensions


Switch Receptacle 1212
Bronze Aluminum L W H 1201
BULKHEAD MOUNTING
1201 1201A - Single 3-3/4” 3” 1-1/2”
1202 1202A - Duplex 6-1/2” 3” 1-1/2”
1212 1212A Double Pole Single 6-1/2” 3” 1-1/2”
1222 1222A Double Pole Duplex 9-1/2” 3” 1-1/2”
FLUSH MOUNTING
1201F 1201FA - Single 3-3/4” 3” 2”
1202F 1202FA - Duplex 6-1/2” 3” 2”
1212F 1212FA Double Pole Single 6-1/2” 3” 2” 1235
1201F
1222F 1222FA Double Pole Duplex 9-1/2” 3” 2”

1200 Plug Only


1206 Receptacle Interior Only

1212F
1200

PIN AND SLEEVE TYPE – 10 Amp, 250 V - 20 Amp, 125 V


Catalog Number Box Dimensions
Switch Receptacle
2 Wire/3 Pole 3 Wire/4 Pole L W H
Bronze Alum. Bronze Alum.
1231 1231A 1251 1251A - Single 3-3/4” 3” 1-1/2” 1206
1232 1232A 1252 1252A - Duplex 6-1/2” 3” 1-1/2”
1233 1233A 1253 1253A - Triple 9-1/2” 3” 1-1/2”
1235 1235A 1255 1255A Double Pole Single 6-1/2” 3” 1-1/2”
1237 1237A 1257 1257A Double Pole Duplex 9-1/2” 3” 1-1/2”

251

Plug Complete Receptacle Interior Switch Interior


2W/3P 3W/4P 2W/3P 3W/4P Double Pole 1231
250 255 251 256 871

250

BECK ELECTRIC
SUPPLY Wilmington, California
Phone: 310-834-1151
Fax: 310-834-1208
Richmond, California
Phone: 510-215-9499
Fax: 510-215-7889
Seattle, Washington
Phone: 206-763-2011
Fax: 206-767-9219
www.beckelectric.com E-mail: socalsales@beckelectric.com E-mail: casales@beckelectric.com E-mail: wasales@beckelectric.com
0141-03 4/26/06 8:38 PM Page 1

145-06

OCEANIC ELECTRICAL MFG. CO., INC.


WATERTIGHT SWITCHES AND RECEPTACLES
COMBINATION SWITCH & RECEPTACLE
Cast Bronze RECTANGULAR BOX TYPE
Dimensions
Cat. No. Switch Receptacle
Finish: Natural bronze. L W H
Outlets: Maximum 3/4” IPS straight 878 1 - DP #871 1 - 2 Wire #881 4-1/4” 2-7/8” 2”
through. Furnished blank unless
1880 1 - DP #871 1 - 3 Wire #1881 6-1/4” 2-7/8” 1-7/8”
otherwise specified.
Rating: 10 Amp, 125 V - 10 Amp, 878DP 1 - DP #871 1 - 2 Wire #881 4-1/4” 2-7/8” 2”
250 V. 898 1 - DP #871 2 - 2 Wire #881 6-3/4” 2-7/8” 1-7/8”
Plugs: Not included 1885 1 - DP #871 2 - 3 Wire #1881 8-1/2” 2-7/8” 1-7/8”
2 Wire - Cat. No. 852 899 2 - DP #871 1 - 2 Wire #881 6-3/4” 2-7/8” 1-7/8”
3 Wire - Cat. No. 1853
878 1883 2 - DP #871 1 - 3 Wire #1881 6-3/4” 2-7/8” 1-7/8”

WATERTIGHT SWITCHES
Cast Bronze - Aluminum Alloy WATERTIGHT RECEPTACLES
Cast Bronze - 10 Amp, 125 V
10 Amp. 125 V - 10 Amp, 250 V. “T” Rated

822
879
832 1848
RECTANGULAR BOX TYPE
RECTANGULAR BOX TYPE Box Dimensions
Cat. No. Description
Box Dimensions L W H
Cat. No. Description
Length Width Depth SINGLE GANG
BULKHEAD MOUNTING 879 2 Wire Single Receptacle 4-1/4” 2-7/8” 2”
822 Double Pole 3-3/4” 3” 2” 1879 3 Wire Single Receptacle 4-1/4” 2-7/8” 2”
FLUSH MOUNTING TWO GANG
832 Double Pole 3-3/4” 3” 2” 895 2 Gang 2 Wire Receptacle 4-1/4” 2-7/8” 2”
ROUND BOX TYPE 2879 2 Gang 3 Wire Receptacle 6-1/2” 2-7/8” 2”
Diameter Height THREE GANG
1848 Indicating-Double Pole 3” 3” 893 3 Gang 2 Wire Receptacle 6-1/2” 2-7/8” 2”
893SP 3 Gang 3 Wire Receptacle 8-1/2” 3-1/4” 2”
Finish: Natural bronze. Also available in Aluminum Alloy
FOUR GANG
by adding suffix letter “A” to Cat. No. Chrome, Nickel,
Cadmium or other special finishes available on request. 894 4 Gang 2 Wire Receptacle 8-1/4” 2-7/8” 2”
894SP 4 Gang 3 Wire Receptacle 11” 3-1/4” 2”
Outlets: Maximum 3/4” IPS straight through.
Furnished blank unless otherwise specified. Finish: Natural bronze.
Outlets: Maximum 3/4” IPS straight through.
Furnished blank unless otherwise specified.

Plugs: Not included


2 Wire - Cat. No. 852
3 Wire - Cat. No. 1853

OCEANIC ELECTRICAL MFG. CO., INC.


250 Third Street • Elizabeth, NJ 07206
Tel: (908) 355-1900 • Fax: (908) 355-0041
www.oceanicelectric.com
0142-03 4/26/06 8:39 PM Page 1

146-06

OCEANIC ELECTRICAL MFG. CO., INC.


WATERTIGHT JUNCTION BOXES
STANDARD BOXES CAST BRONZE – CAST ALUMINUM
3” Diameter x 1-1/2” deep.
FINISH – Natural 430 TELEGRAPH KEYS
OUTLET – Maximum 3/4” IPS four way.
Furnished blank unless otherwise specified.
Catalog No.
Description
Bronze Aluminum
432-431
Box Only 430 435A
1324 1326
Cover Only 431 436A Portable
Permanent Mounting
Gasket Only 432 432
Watertight Cast Bronze with Silver Contacts and
4-1/4” Diameter. Depth 1-3/4”. Max. IPS Outlet 1”. Condenser—External Lever Operated
FINISH - Natural. FINISH – Natural Bronze
OUTLET - Furnished blank unless otherwise specified. OUTLET – Maximum 3/4” IPS straight through
Furnished blank unless otherwise specified.
Cat. No. Cat. No.
Description
Cast Bronze Cast Aluminum
Complete Box 3111 3165A
Cover Only 418 423A
Gasket Only 417 417
3111 GASKETS

THRU-BULKHEAD
Flush Mounting JUNCTION BOX TYPE GLOBE TYPE
Designed for use in locations
where it is desirable to conceal wiring.
FINISH – Natural bronze. Available in cast
aluminum by adding suffix letter “A” to Cat. No. 2950
OUTLETS – Maximum 1” IPS four way.
Furnished blank unless otherwise specified. RECTANGULAR COMBINATION
BOX TYPE BOX TYPE
Flange Box Box
Cat. No. Description
O.D. O.D. Depth
Cat. No. For Use with Diameter
2950 Box Only 5-3/4” 3-1/2” 2-3/8”
432 3” Junction Box 3-3/8”
2950MC Complete with 2 wire connection block
417 4” Junction Box 4-5/8”
2951 Box Only 5-3/4” 3-1/2” 3-3/8”
120 60-100 Watt Globe 3-3/8”
2951MC Complete with 2 wire connection block
121 150 Watt Globe 4-3/8”
122 200 Watt Globe 4-3/4”
123 300 Watt Globe 6”
SQUARE TYPE 128 15 Watt Flare Globe 2-7/8”
FINISH – Natural bronze. Available in cast aluminum by adding
suffix letter “A” to Cat. No.
Cat. No. For Use with Dimensions
OUTLETS – Maximum 1-1/4” IPS four way, or maximum two
3/4” IPS per side. Furnished blank unless otherwise specified. 124 40 Watt Flare Globe 3-1/2” Dia.
DIMENSIONS – 4-1/2” x 4-1/2” x 2-1/4”. 125 100 Watt Flare Globe 4-3/8” Dia.
COVER – Cat. No. 418. GASKET – Cat No. 417. 126 #330 Globe 9” Dia.
Cat. No. Description 161 Rectangular Box 4-1/8” x 2-3/4”
2900 Box Only 162 Combination box 6-1/4” x 2-3/4”
2900MC Box complete with cover, gasket, 127 6” Bowl 6” Bowl
and four wire connection block
2900MC-6 Box complete with cover, gasket, 129 8” Bowl 8” Dia.
and six wire connection block

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0143-03 4/26/06 8:40 PM Page 1

147-06

OCEANIC ELECTRICAL MFG. CO., INC.


WATERTIGHT CONNECTION BOXES GENERAL ALARM CONTROL SWITCHES
WITH COVER & GASKET – ALL CAST BRONZE WATERTIGHT – CAST BRONZE –
4-1/2” DIA. X 3-3/4” HIGH
FINISH: Painted red enamel 6750
OUTLET: Max. 1” IPS. Furnished blank.
Cat. No. 6750 GENERAL ALARM:
When switch is not at “ON” position,
lever automatically returns and locks
at “OFF” position. To release, pull
knob outward. Hold lever at “ON” 6752
position for 10 seconds to permit cam
2110
to trip. When released it returns and
locks at “OFF” position.
FINISH: Natural bronze. Cat. No. 6752 CONTROL SWITCH:
OUTLETS: Suitable for four-way drilling and tapping as indicated. “AUTO” and “AT WILL” – For momen- 6751
Furnished blank unless otherwise specified. tary contact the lever is moved to the
Connection Inside Max. IPS right and when released it returns to
Cat. No. Diameter normal breaking the circuit.
Block Depth Outlet
2110 4 Wire 4-1/4” 1-3/4” 1” Cat. No. 6751 STEAM WHISTLE:
2114 6 Wire 4-1/2” 1-3/4” 1” “AT WILL” – Manual control handle.
When released from “ON” position,
lever automatically returns to “OFF.”
CAST BRONZE – CAST ALUMINUM
WATERTIGHT PUSH BUTTONS
CAST BRONZE 8486
Finish: Natural bronze.
Outlets: Max. 1/2” IPS straight through.
Furnished blank unless otherwise specified.
Cat. No. Description Dimensions
8486 Single Gang 3-1/4” x 2-3/4”
8492 Two Gang 4-3/4” x 2-1/4” x 1-1/4”
5811 5822
Cat. No. Description Current Rating Dimensions
5811 10 Wire 30 Amp 6-7/8” x 4” x 3-5/8” WATERTIGHT PULL AND SPLICE BOXES
5813 13 Wire 20 Amp 6-7/8” x 4” x 3-5/8” WITH COVERS & GASKETS
5822 20 Wire 30 Amp 7” x 6” x 3-5/8”
CAST BRONZE – CAST ALUMINUM
Constructed with extra heavy walls to meet the most extreme
5826 26 Wire 20 Amp 7” x 6” x 3-5/8”
conditions of marine and industrial use.
5844 40 Wire 30 Amp 12” x 7” x 4”
Cat. No. Length Width Depth
5852 52 Wire 20 Amp 12” x 7” x 4”
2250 3-7/8” 2-3/4” 2-1/4”
FINISH: Natural bronze. Aluminum alloy available by 2725 4” 4” 3”
adding suffix letter “A” to Catalog Number.
2726 4” 4” 4”
OUTLETS: Maximum 1/4” I.P.S. Furnished blank unless
otherwise specified. 2251 4-1/2” 4-1/4” 2-1/4”
2252 5-3/4” 3-1/4” 2-1/2”
2727 6” 4” 3”
ROTARY SWITCH INTERIORS 2256 7” 5” 3”
MOLDED COMPOSITION –
10 Amp, 250 V – 10 Amp, 125 V 2265 8” 4-1/2” 4”
2730 8” 6” 4” 2730
Screw Hole 871 2732 8” 8” 4”
Cat. No. Description
Spacing
2733 8” 8” 6”
871 Double Pole 1-1/4”
2735 10” 6” 4”
2736 10” 10” 6”
2742 15” 10” 6”

OCEANIC ELECTRICAL MFG. CO., INC.


250 Third Street • Elizabeth, NJ 07206
Tel: (908) 355-1900 • Fax: (908) 355-0041
www.oceanicelectric.com
0144-04 4/26/06 8:40 PM Page 1

148-06

OCEANIC ELECTRICAL MFG. CO., INC.


WATERTIGHT N.E.C. FUSE BOXES WATERTIGHT PLUGS & INTERIORS
30 Amp, 250 V – Cast Bronze – Cast Aluminum Two and Three Wire Standard 852
Furnished complete with box, cover, gasket and fuse block; 10 Amp, 250 V A.C. – D.C.
fuses are not included. Cat. No. Description
Finish: Natural bronze. Available in cast aluminum by adding 852 2 Wire Phenolic Plug Complete
suffix letter “A” to Cat. No. 881
1853 3 Wire Phenolic Plug Complete
Size: 5-1/4” x 4” x 2-1/2” 1853
Outlets: Max. 1” IPS four-way. Furnished blank unless 881 2 Wire Receptacle Interior
otherwise specified. 1881 3 Wire Receptacle Interior
1881
Cat. No. Description
5803 Complete, w/2 pole
Commercial “U” Blade Type
fuse block 15 Amp., 25 V – Polarized
583 2 pole fuse block Cat. No. Description
only 1200 Watertight Plug Complete
5804 Complete, w/3 pole 1206
1206 Receptacle Interior
fuse block
1583 3 pole fuse block 1200
only 5803
Pin and Sleeve Type
10 Amp., 250 V A.C. or D.C.
Cat. No. Description
2 Wire 3 Pole
250
250 Plug Complete
257 Plug Interior Only
FUSE BLOCKS 251 Receptacle Inter.
257
1-30 Amp, 250 V 3 Wire 4 Pole
Phenolic Composition 255 Plug Complete
Cat. No. Description 258 Plug Interior Only
Double Pole – Main Line 256 Receptacle Inter. 251
583
581 Midget Type Cartridge Fuse 356 Receptacle Interior Only
582 A. G. C. Type Glass Fuse
583 N. E. C. Standard Cartridge Fuse
Three Pole – Main Line LAMPHOLDERS
1583 N. E. C. Standard Cartridge Fuse For Lighting Fixtures
Bakelite – Medium Screw Base 687
Cat. No. Style Description
Bracket w/ Cadmium
687
Type Plated Bracket
Navy Exposed Wire
4836
Type Terminals
Flange 684A1
684A1 2 Screw Terminals
CONNECTION BLOCKS Type
4836
Cat. No. Description Mogul Base
101
101 4 Wire Connection Block
Cat. No. Description
101-6 6 Wire Connection Block
1710 2 Wire less Cap
1720 2 Wire with 3/8” Cap
1722 2 Wire with 1/2” Cap

Candelabra Screw Base


Cat. No. Description
1720
216P Porcelain

290 Murray Street 3726 Parker Street


Cambridge Montreal, QC H3C 2E2 Burnaby, BC V5C 3B1
Canada Canada
Agencies Telephone: (514) 875-5700 Telephone: (604) 205-0057
Limited Fax: (514) 875 8638 Fax: (604) 205-0027
Toll Free: 1-877-875-0057
Please see our ad in the Advertising Section E-mail: info@cambridgeagencies.com
0145-03 4/26/06 8:41 PM Page 1

149-06

OCEANIC ELECTRICAL MFG. CO., INC.


NON-WATERTIGHT SWITCHES AND RECEPTACLES
For Surface and Flush Mounting
Cast Bronze – Cast Aluminum
BOX FINISH: Natural cast bronze. Available in cast aluminum by adding suffix letter “A” to Cat. No.
OUTLETS: Maximum 3/4” IPS straight through. Furnished blank unless otherwise specified.
FLUSH MOUNTING: Units for flush mounting are available by adding suffix letter “F” to Cat. No.
DIMENSIONS: 4-1/2” x 2-3/4” x 1-7/8”

HEAVY DUTY TOGGLE SWITCH RECEPTACLES


Cover: Brushed brass furnished with bronze box. Grounded 2 Wire 3 Pole 784F
Stainless steel furnished with aluminum box.
Rating – Amps
Cat. No. Description
125 V 250V
775 Single Pole 10A-T 5A
776 Double Pole 10A-T 10A
777 Three Way 10A-T 5A
778 Four Way 5A-T 2A

RECEPTACLES
Grounded receptacles available
by adding suffix letter “G” to Cat. No. 775 773 774 783 784
Rating – Amps
Cat. No. Description
125 V 250V Rating – Amps
Cat. No. Description
785 One Unit 15A 10A 125 V 250V
786 Two Unit 15A 10A 773 Single Receptacle 15A 10A
787 Three Unit 15A 10A 774 Duplex Receptacle 15A 10A
783 Single Receptacle 15A 10A
784 Duplex Receptacle 15A 10A
784F Flush Duplex Receptacle 15A 10A
SWITCHES
Rating – Amps
Cat. No. Description
125 V 250V
794 One Switch–Single Pole 10A-T 5A REPLACEMENT PARTS
795 Two Switches–Single Pole 10A-T 5A For Lighting Fixtures and Boxes
19R
797 Three Switches–Single Pole 10A-T 5A Cat. No. Description
796 One Switch–Three Way 10A-T 5A 19R Red Indicator Lens Assembly
796T Two Switches–Three Way 10A-T 5A 788
19G Green Indicator Lens Assembly
19B Blue Indicator Lens Assembly
19A Amber Indicator Lens Assembly
21
COMBINATION SWITCH & RECEPTACLE 19C Clear Indicator Lens Assembly
Rating – Amps 21 Canopy Toggle Switch w/ Leads
Cat. No. Description
125 V 250V 23 Single Pole Toggle Switch
788 Single Pole Switch with One Receptacle 10A-T 15A 24 Three Way Toggle Switch
789T Three Way Switch with One Receptacle 10A-T 15A 25 Four Way Toggle Switch
790 Single Pole Switch with Two Receptacles 10A-T 15A 12 2 Wire Receptacle Interior 23 12

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0146-03 4/26/06 8:42 PM Page 1

150-06

DORN EQUIPMENT CORP.


NYLON STUFFING TUBES & PACKING ASSEMBLIES – MIL SPEC
Nylon stuffing tubes and packing assemblies are intended for making
electric cable penetration into shipboard enclosures for electrical equip- PACKING ASSEMBLIES
ment. The following types are suitable for both thin-wall enclosures up
Mfgr.
to 5mm (3/16") thick and thick-wall enclosures, bulkheads and decks of Tube Code Military Supersedes FIIN Bushing
5mm to 19mm (3/16" to 3/4") thick. Nylon stuffing tubes meet the Size No. Part No. Part No. 5330 ID (in.)
requirements of NEMA 250, (4,4X,6,6P), Mil-Std-108 Submersible (15 ft.). 1 1A M19622/16-001 MS16177-1 202-2580 .187
ASTM Designation: F1836M-97. 1A1 M19622/16-002 MS16177-2 202-2581 .127
1A2 M19622/16-003 MS16177-3 202-2582 .150
1B M19622/16-0004 MS16177-4 202-2583 .234
1B1 M19622/16-0005 MS16177-5 202-2584 .278
1C M19622/16-0006 MS16177-6 202-2585 .296
2 2A M19622/17-01 MS16178-1 202-2586 .325
2B M19622/17-02 MS16178-2 202-2587 .367
2C M19622/17-03 MS16178-3 202-2588 .390
Military Federal Supersedes
Size Part No. Stock No. Part No. 2D M19622/17-04 MS16178-4 202-2589 .425
1 M19622/1-001 5975-296-4092 MS 16155-1 3 3A M19622/18-0018 MS17272-1 202-2590 .472
2 M19622/1-002 5975-296-4093 MS 16156-2 4 4A M19622/19-0001 MS16179-1 202-2591 .500
3 M19622/1-003 5975-296-6957 MS 17270-3 4B M19622/19-0002 MS16179-2 202-2592 .547
4 M19622/1-004 5975-296-4095 MS 16157-4 4C M19622/19-0003 MS16179-3 202-2593 .584
4T M19622/1-005 5975-296-5046 MS 16157-4T 4D M19622/19-0004 MS16179-4 202-2594 .609
5 M19622/1-006 5975-296-4096 MS 16158-5 4E M19622/19-0005 MS16179-5 202-2595 .665
6 M19622/1-007 5975-296-4097 MS 16159-6 4E1 M19622/19-0006 MS16179-6 202-2596 .700
7 M19622/1-008 5975-296-4098 MS 16160-7 4F M19622/19-0007 MS16179-7 202-2597 .719
8 M19622/1-009 5975-296-4099 MS 16161-8 5 5A1 M19622/20-0001 MS16189-1-A --------- .777
9 M19622/1-010 5975-296-4100 MS 16162-9 5A M19622/20-0002 MS16189-1 202-2600 .812
90° Type 5B M19622/20-0003 MS16189-2 202-2601 .853
1 M19622/2-001 5975-503-4694 MS 16163-1 5C M19622/20-0004 MS16189-3 202-2602 .889
2 M19622/2-002 5975-503-4693 MS 16164-2 5D M19622/20-0005 MS16189-4 202-2603 .937
3 M19622/2-003 5975-877-6956 MS 17271-3 5E M19622/20-0006 MS16189-5 202-2604 .980
4T M19622/2-005 5975-989-5045 MS 16165-4T 5E1 M19622/20-0007 MS16189-6 202-2605 1.021
5 M19622/2-006 5975-503-4695 MS 16166-5 5F M19622/20-0008 MS16189-7 202-2606 1.042
6 M19622/2-007 5975-503-4697 MS 16167-6 5G M19622/20-0009 MS16189-8 202-2607 1.073
5H M19622/20-0010 MS16189-9 202-2608 1.113
6 6A2 M19622/21-0001 MS16190-1 202-2609 1.159
NYLON STUFFING TUBES, N.P.T. 6A3 M19622/21-0002 MS16190-2 202-2610 1.167
Pipe 6A M19622/21-0003 MS16190-3 202-2611 1.200
Thread Military Federal Supersedes
Size Diam. Part No. Stock No. Part No. 6A1 M19622/21-0004 MS16190-4 202-2612 1.244
1 1/2" M19622/3-001 5975-808-4063 MS 17039-1 6B M19622/21-0005 MS16190-5 202-2613 1.305
2 3/4" M19622/3-002 5975-808-4064 MS 17040-1 6B1 M19622/21-0006 MS16190-6 202-2614 1.350
3 1" M19622/3-003 5975-877-6955 MS 17273-1 6C M19622/21-0007 MS16190-7 202-2615 1.390
4T 1" M19622/3-004 5975-892-9259 MS 17041-1 7 7C M19622/22-0001 MS16191-1 202-2616 1.458
5 1-1/2" M19622/3-005 5975-808-9272 MS 17042-1 7A M19622/22-0002 MS16191-2 202-2617 1.500
6 2" M19622/3-006 5975-808-4066 MS 17043-1 7B M19622/22-0003 MS16191-3 202-2618 1.566
7 2-1/2" M19622/3-007 5975-808-4067 MS 17044-1 8 8A M19622/23-0001 MS16192-1 202-2620 1.641
8 3" M19622/3-008 5975-808-4068 MS 17045-1 8A1 M19622/23-0002 MS16192-2 202-2621 1.688
9 3-1/2" M19622/3-009 5975-808-4069 MS 17046-1 8A2 M19622/23-0003 MS16192-3 202-2622 1.735
8B M19622/23-0004 MS16192-4 202-2623 1.812
8B1 M19622/23-0005 MS16192-5 202-2624 1.859
8B2 M19622/23-0006 MS16192-6 202-2625 1.906
9 9A M19622/24-0001 MS16193-1 202-2628 2.046
“Y” TYPE 9A1 M19622/24-0002 MS16193-2 202-2629 2.093
9B M19622/24-0003 MS16193-3 202-2630 2.140
Military Federal
Size Part No. Stock No. 9B1 M19622/24-0004 MS16193-4 202-2631 2.285
1 M19622/4-01 5975-782-6139 9B2 M19622/24-0005 MS16193-5 202-2632 2.364
2 M19622/4-02 5975-782-6140 9C M19622/24-0006 MS16193-6 202-2633 2.418
3 M19622/4-03 5975-782-6141 9D M19622/24-0007 MS16193-7 202-2634 2.540
4T M19622/4-04 5975-782-6142 9E M19622/24-0008 MS16193-8 202-2635 2.700

Phone: 781-662-9300
Fax: 781-665-0180
E-mail: mkp@dornequipment.com
27 UPHAM STREET • MELROSE, MASSACHUSETTS 02176 Web: www.dornequipment.com
0147-04 4/26/06 8:43 PM Page 147

151-06

DORN EQUIPMENT CORP.


NYLON STUFFING TUBES & PACKING ASSEMBLIES – COMMERCIAL
CLEARANCE ASTM Designation: F1836M-97 PACKING ASSEMBLIES
TUBE PART NO. PACKING CABLE RANGE HOLE DIA. FOR
SIZE ASSEMBLY INCH MM (METRIC) TUBE INSTALL. MAN. PART CABLE RANGE
WALL THICKNESS - 3/16” MAX. (4.76mm)
NYST-1 NYST MIN. MAX. MIN. MAX. INCH MM CODE NO. INCH MM (METRIC)
BODY LOCKNUT
1 -001 -16 .077 .296 1.96 7.62 .885 22.48 CAP NYST-20 MIN. MAX. MIN. MAX.
2 -002 -17 .275 .472 6.99 11.99 1.010 25.65 5A1 -001 .737 .777 18.72 19.74
3 -003 -18 .410 .472 10.41 11.99 1.135 28.83 5A -002 .772 .812 19.62 20.63
4 -004 -19 .450 .777 11.43 19.74 1.260 32.00 PACKING 5B -003 .813 .853 20.65 21.67
ASSEMBLY
4T -005 -19 .450 .777 11.43 19.74 1.385 35.18 5C -004 .849 .889 21.57 22.58
5 -006 -20 .737 1.113 19.10 28.27 2.010 51.05 5D -005 .889 .937 22.58 23.80
6 -007 -21 .776 1.390 20.47 35.31 2.510 63.75 5E -006 .937 .980 23.80 24.89
7 -008 -22 1.418 1.610 36.40 40.89 2.760 70.10 5E1 -007 .981 1.021 24.92 25.93
O-RING
8 -009 -23 1.610 2.00 41.28 50.80 3.260 82.80 5F -008 1.000 1.042 25.40 26.47
9 -010 -24 2.006 2.700 51.56 68.58 4.010 101.85 CAP
5G -009 1.033 1.073 26.24 27.25
5H -010 1.073 1.113 27.25 28.27
CLEARANCE
TUBE PART NO. PACKING CABLE RANGE HOLE DIA. FOR
BODY
SIZE ASSEMBLY INCH MM (METRIC) TUBE INSTALL. PACKING MAN. PART CABLE RANGE
NYST-2 NYST MIN. MAX. MIN. MAX. INCH MM ASSEMBLY
CODE NO. INCH MM (METRIC)
1 -001 -16 .077 .296 1.96 7.62 .885 22.48 O-RING
NYST-21 MIN. MAX. MIN. MAX.
2 -002 -17 .275 .472 6.99 11.99 .885 22.48
6A2 -001 1.119 1.159 28.42 29.44
3 -003 -18 .410 .472 10.41 11.99 1.135 28.83
WALL THICKNESS 6A3 -002 1.127 1.167 28.63 29.64
4T -005 -19 .450 .777 11.43 19.74 1.260 32.00 3/4” MAX. (19.05mm) 6A -003 1.160 1.200 29.46 30.48
5 -006 -20 .752 1.113 19.10 28.27 2.010 51.05
LOCKNUT 6A1 -004 1.204 1.254 30.58 31.85
6 -007 -21 .806 1.390 20.47 35.31 2.510 63.75
6B -005 1.255 1.305 31.89 33.15
TUBE PART NO. PACKING CABLE RANGE NPT 6B1 -006 1.309 1.350 33.25 34.29
BODY 6C -007 1.350 1.390 34.29 35.31
SIZE ASSEMBLY INCH MM (METRIC) CAP
NYST-3 NYST MIN. MAX. MIN. MAX. INCH 6D -008 .856 .886 21.74 22.50
1 -001 -16 .077 .296 1.96 7.62 1/2 6D1 -009 .926 .956 23.52 24.28
2 -002 -17 .275 .472 6.99 11.99 3/4 PACKING 6D2 -010 .776 .806 19.71 20.47
ASSEMBLY
3 -003 -18 .410 .472 10.41 11.99 1
4T -004 -19 .450 .777 11.43 19.74 1
MAN. PART CABLE RANGE
5 -005 -20 .752 1.113 19.10 28.27 1-1/2
6 -006 -21 .806 1.390 20.47 35.31 2 CODE NO. INCH MM (METRIC)
7 -007 -22 1.433 1.610 36.40 40.89 2-1/2 NYST-22 MIN. MAX. MIN. MAX.
8 -008 -23 1.625 2.00 41.28 50.80 3 NPT 7C -001 1.418 1.458 36.02 37.03
9 -009 -24 2.030 2.700 51.56 68.58 3-1/2 7A -002 1.460 1.500 37.08 38.10
7B -003 1.510 1.566 38.35 39.78
CAP PACKING
TUBE PART PACKING CLEARANCE ASSEMBLY 7B1 -004 1.570 1.610 39.88 40.89
SIZE NO. ASSEMBLY CABLE RANGE HOLE DIA. FOR
INCH MM (METRIC) TUBE INSTALL.
NYST-4 NYST MIN. MAX. MIN. MAX. INCH MM MAN. PART CABLE RANGE
BODY CODE NO. INCH MM (METRIC)
1 -001 -16 .077 .296 1.96 7.62 .885 22.48
O-RING
2 -002 -17 .275 .472 6.99 11.99 1.010 25.65 NYST-23 MIN. MAX. MIN. MAX.
3 -003 -18 .410 .472 10.41 11.99 1.135 28.83 8A -001 1.610 1.641 40.89 41.68
4T -004 -19 .450 .777 11.43 19.74 1.385 35.18 8A1 -002 1.645 1.688 41.78 42.87
LOCKNUT
PACKING ASSEMBLIES WALL THICKNESS -3/16” MAX. (4.76MM) 8A2 -003 1.695 1.735 43.05 44.07
8B -004 1.745 1.812 44.32 46.03
MAN. PART CABLE RANGE
MAN. PART CABLE RANGE 8B1 -005 1.816 1.859 46.13 47.22
CODE NO. INCH MM (METRIC)
CODE NO. INCH MM (METRIC) 8B2 -006 1.860 1.906 47.24 48.41
NYST-16 MIN. MAX. MIN. MAX. 8B3 -007 1.905 1.935 48.39 49.15
NYST-18 MIN. MAX. MIN. MAX.
1A -001 .137 .187 3.48 4.75 8B4 -008 1.940 2.000 49.28 50.80
3A -018 .410 .472 10.41 11.99
1A1 -002 .077 .127 1.96 3.23
1A2 -003 .100 .150 2.54 3.81 CABLE RANGE
MAN. PART
1B -004 .184 .234 4.67 5.94 MAN. PART CABLE RANGE
CODE NO. INCH MM (METRIC)
1B1 -005 .228 .278 5.79 7.06 CODE NO. INCH MM (METRIC)
NYST-19 MIN. MAX. MIN. MAX.
1C -006 .244 .296 6.20 7.62 NYST-24 MIN. MAX. MIN. MAX.
4A -001 .450 .500 11.43 12.70
MAN. PART CABLE RANGE 4B -002 .497 .547 12.62 13.89 9A -001 2.006 2.046 50.95 51.97
CODE NO. INCH MM (METRIC) 4C -003 .534 .584 13.56 14.83 9A1 -002 2.050 2.093 52.07 53.16
4D -004 .559 .609 14.20 15.47 9B -003 2.100 2.140 53.34 54.36
NYST-17 MIN. MAX. MIN. MAX.
4E -005 .610 .665 15.49 16.89 9B1 -004 2.150 2.285 54.61 58.04
2A -001 .275 .325 6.99 8.26
4E1 -006 .650 .700 16.51 17.78 9B2 -005 2.295 2.364 58.29 60.05
2B -002 .317 .367 8.05 9.32
4F -007 .669 .719 16.99 18.26 9C -006 2.375 2.418 60.33 61.42
2C -003 .340 .390 8.64 9.91
4F1 -009 .710 .760 18.03 19.30 9D -007 2.428 2.540 61.67 64.52
2D -004 .375 .425 9.53 10.80
4G -008 .727 .777 18.47 19.74 9E -008 2.560 2.700 65.02 68.58
2E -005 .422 .472 10.72 11.99

DORN EQUIPMENT CORP. Jo-Kell, Inc. Potter Electric, Inc. Todd Marine Electrical Supply
T: 781-662-9300 F: 781-665-0180 Chesapeake, Virginia National City, California Norfolk, Virginia
www.dornequipment.com T: 757-523-2900 F: 757-523-8773 T: 619-474-8171 F: 619-474-1947 T: 757-855-3111 F: 757-857-1665
Distributed by:
American Fabrication & Surplus Murray-Benjamin Electric Co. Seacoast Electric Co., Inc. Young Engineering Co., Inc.
Virginia Beach, Virginia Stamford, Connecticut Hawthorne, New York New Orleans, Louisiana
T:757-460-9889 F: 757-460-9890 T: 203-705-2100 F: 203-705-2111 T: 914-747-3870 F: 914-747-3919 T: 504-581-6292 F: 504-525-5132
0134-05 4/26/06 8:44 PM Page 1

152-06

OCEANIC ELECTRICAL MFG. CO., INC.


CABLE STRAPS
5/8" Width - 9/32" Bolt Hole - .062" Thickness
Brass or Zinc Plated Steel Two Hole Type

SINGLE CABLE STRAPS Two Hole Type


CABLE One Hole One Hole Two Hole Two Hole
SIZE Pad Type Bulkhead Type Pad Type Bulkhead Type
Brass Steel Brass Steel Brass Steel Brass Steel
3-CABLE STRAPS 4-CABLE STRAPS
.250 4400B 4400S 4450B 4450S 4500B 4500S 4550B 4550S One Hole-Pad Type CABLE CABLE
Brass Steel Brass Steel
.296 4401B 4401S 4451B 4451S 4501B 4501S 4551B 4551S SIZE SIZE
.375 4402B 4402S 4452B 4452S 4502B 4502S 4552B 4552S .250 4850B 4850S .250 4950B 4950S
.437 4403B 4403S 4453B 4453S 4503B 4503S 4553B 4553S .296 4851B 4851S .296 4951B 4951S
.500 4404B 4404S 4454B 4454S 4504B 4504S 4554B 4554S .375 4852B 4852S .375 4952B 4952S
.577 4405B 4405S 4455B 4455S 4505B 4505S 4555B 4555S .437 4853B 4853S .437 4953B 4953S
.593 4406B 4406S 4456B 4456S 4506B 4506S 4556B 4556S .500 4854B 4854S .500 4954B 4954S
.617 4407B 4407S 4457B 4457S 4507B 4507S 4557B 4557S .577 4855B 4855S .577 4955B 4955S
.667 4408B 4408S 4458B 4458S 4508B 4508S 4558B 4558S .593 4856B 4856S .593 4956B 4956S
.687 4409B 4409S 4459B 4459S 4509B 4509S 4559B 4559S One Hole-Bulkhead Type .617 4857B 4857S .617 4957B 4957S
.699 4410B 4410S 4460B 4460S 4510B 4510S 4560B 4560S .667 4858B 4858S .667 4958B 4958S
.750 4411B 4411S 4461B 4461S 4511B 4511S 4561B 4561S .687 4859B 4859S .687 4959B 4959S
.768 4412B 4412S 4462B 4462S 4512B 4512S 4562B 4562S .699 4860B 4860S .699 4960B 4960S
.772 4413B 4413S 4463B 4463S 4513B 4513S 4563B 4563S .750 4861B 4861S .750 4961B 4961S
.810 4414B 4414S 4464B 4464S 4514B 4514S 4564B 4564S .768 4862B 4862S .768 4962B 4962S
.822 4415B 4415S 4465B 4465S 4515B 4515S 4565B 4565S .772 4863B 4863S .772 4963B 4963S
.836 4416B 4416S 4466B 4466S 4516B 4516S 4566B 4566S .810 4864B 4864S .810 4964B 4964S
Two Hole-Pad Type
.843 4417B 4417S 4467B 4467S 4517B 4517S 4567B 4567S .822 4865B 4865S .822 4965B 4965S
.863 4418B 4418S 4468B 4468S 4518B 4518S 4568B 4568S .836 4866B 4866S .836 4966B 4966S
.877 4419B 4419S 4469B 4469S 4519B 4519S 4569B 4569S .843 4867B 4867S .843 4967B 4967S
.899 4420B 4420S 4470B 4470S 4520B 4520S 4570B 4570S .863 4868B 4868S .863 4968B 4968S
.931 4421B 4421S 4471B 4471S 4521B 4521S 4571B 4571S .877 4869B 4869S .877 4969B 4969S
.937 4422B 4422S 4472B 4472S 4522B 4522S 4572B 4572S .899 4870B 4870S .899 4970B 4970S
.950 4423B 4423S 4473B 4473S 4523B 4523S 4573B 4573S .931 4871B 4871S .931 4971B 4971S
1.002 4424B 4424S 4474B 4474S 4524B 4524S 4574B 4574S Two Hole-Bulkhead Type .937 4872B 4872S .937 4972B 4972S
.950 4873B 4873S .950 4973B 4973S
1.002 4874B 4874S 1.002 4974B 4974S
DUPLEX CABLE STRAPS
CABLE One Hole One Hole Two Hole Two Hole
SIZE Pad Type Bulkhead Type Pad Type Bulkhead Type
Brass Steel Brass Steel Brass Steel Brass Steel
.250 4700B 4700S 4750B 4750S 4600B 4600S 4650B 4650S
.296 4701B 4701S 4751B 4751S 4601B 4601S 4651B 4651S One Hole-Duplex Pad Type
.375 4702B 4702S 4752B 4752S 4602B 4602S 4652B 4652S
.437 4703B 4703S 4753B 4753S 4603B 4603S 4653B 4653S STEEL WELDING PADS
.500 4704B 4704S 4754B 4754S 4604B 4604S 4654B 4654S FOR LIGHTING FIXTURES AND BOXES
.577 4705B 4705S 4755B 4755S 4605B 4605S 4655B 4655S FOR STRAP MOUNTING
.593 4706B 4706S 4756B 4756S 4606B 4606S 4656B 4656S
.617 4707B 4707S 4757B 4757S 4607B 4607S 4657B 4657S
FOR MOUNTING BOXES AND FITTINGS
.667 4708B 4708S 4758B 4758S 4608B 4608S 4658B 4658S Cat. Dia. Depth Threads
.687 4709B 4709S 4759B 4759S 4609B 4609S 4659B 4659S No. Per Inch
.699 4710B 4710S 4760B 4760S 4610B 4610S 4660B 4660S One Hole-Duplex Bulkhead Type 9496 3/4" 3/8" 3/8"-16
.750 4711B 4711S 4761B 4761S 4611B 4611S 4661B 4661S 9498 3/4" 3/8" 1/4"-20
.768 4712B 4712S 4762B 4762S 4612B 4612S 4662B 4662S 9499 3/4" 3/8" 5/16"-18
.772 4713B 4713S 4763B 4763S 4613B 4613S 4663B 4663S 9550 5/8" 3/8" 1/4"-20
.810 4714B 4714S 4764B 4764S 4614B 4614S 4664B 4664S 9551 5/8" 3/8" 5/16"-18
.822 4715B 4715S 4765B 4765S 4615B 4615S 4665B 4665S 9552 5/8" 3/8" 3/8"-16
.836 4716B 4716S 4766B 4766S 4616B 4616S 4666B 4666S 9555 5/8" 5/8" 1/4"-20
.843 4717B 4717S 4767B 4767S 4617B 4617S 4667B 4667S Two Hole-Duplex Pad Type 9556 5/8" 5/8" 5/16"-18
.863 4718B 4718S 4768B 4768S 4618B 4618S 4668B 4668S 9557 5/8" 5/8" 3/8"-16
.877 4719B 4719S 4769B 4769S 4619B 4619S 4669B 4669S 9560 5/8" 3/4" 1/4"-20
.899 4720B 4720S 4770B 4770S 4620B 4620S 4670B 4670S 9561 5/8" 3/4" 5/16"-18
.931 4721B 4721S 4771B 4771S 4621B 4621S 4671B 4671S 9562 5/8" 3/4" 3/8"-16
.937 4722B 4722S 4772B 4772S 4622B 4622S 4672B 4672S 9565 5/8" 1" 1/4"-20
.950 4723B 4723S 4773B 4773S 4623B 4623S 4673B 4673S 9566 5/8" 1" 5/16"-18
1.002 4724B 4724S 4774B 4774S 4624B 4624S 4674B 4674S Two Hole-Duplex Bulkhead Type 9567 5/8" 1" 3/8"-16

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0172-03 4/26/06 8:45 PM Page 1

153-06

PAULUHN ELECTRIC MANUFACTURING, LLP


BRASS TERMINAL TUBES BRASS STUFFING TUBES
Approved by United States Coast Guard Approved by the United States Coast Guard
and Maritime Commission and Maritime Commission
BRASS STUFFING TUBES ARE SUPPLIED
WITH BRASS LOCKNUTS

Male Terminal Tubes

Dia. Bore for Length of


Catalog No. Nominal I.P.S.
Cable (in.) Nipple
Cable Bore Nipple
INX1500-M1 3/8” 3/8” .500 19/32” Type Catalog No. Nominal I.P.S.
Dia. (in.) Length
INX1502-M2 1/2” 1/2” .687 5/8”
A INX1501-S1A 3/8” 3/8” .500 1-3/8”
INX1504-M3 5/8” 3/4” .750 5/8”
A INX1503-S2A 1/2” 1/2” .687 1-3/8”
INX1506-M4 3/4” 3/4” .817 5/8”
A INX1505-S3A 5/8” 3/4” .750 1-3/8”
INX1508-M6 1” 1” 1.062 5/8”
A INX1507-S4A 3/4” 3/4” .817 1-3/8”
INX1510-M8 1-1/4” 1-1/4” 1.375 5/8”
A INX1509-S6A 1” 1” 1.062 1-1/2”
INX1512-M10 1-1/2” 1-1/2” 1.625 5/8”
A INX1511-S8A 1-1/4” 1-1/4” 1.375 1-1/2”
INX1514-M11 1-3/4” 2“ 1.875 5/8”
A INX1513-S10A 1-1/2” 1-1/2” 1.625 1-5/8”
INX1516-M12 2” 2” 2.062 5/8”
A INX1515-S11A 1-3/4” 2” 1.875 1-3/4”
INX1518-M13 2-1/2” 2-1/2” 2.500 5/8”
A INX1517-S12A 2” 2” 2.062 1-3/4”
INX1575-M14 3” 3” 3.068 1”
A INX1519-S13A 2-1/2” 2-1/2” 2.500 2”
INX1577-M15 3-1/2” 3-1/2” 3.548 1-1/8”
A INX1573-S14A 3” 3” 3.068 2-1/4”
INX1579-M16 4” 4” 4.026 1-1/8”
B INX1521-S1B 3/8” 3/8” .500 1-7/8”
B INX1523-S2B 1/2” 1/2” .687 1-7/8”
B INX1525-S3B 5/8” 3/4” .750 1-7/8”
B INX1527-S4B 3/4” 3/4” .817 1-7/8”
B INX1529-S6B 1” 1” 1.062 2-1/8”
B INX1532-S8B 1-1/4” 1-1/4” 1.375 2-1/4”
Female Terminal Tubes B INX1533-S10B 1-1/2” 1-1/2” 1.632 2-3/8”
B INX1535-S11B 1-3/4” 2” 1.875 2-1/2”
Dia. Bore B INX1537-S12B 2” 2” 2.062 2-1/2”
Catalog No. Nominal I.P.S.
for Cable (in.) B INX1539-S13B 2-1/2” 2-1/2” 2.500 2-3/4”
INX1520-F1 3/8” 3/8” .500 B INX1574-S14B 3” 3” 3.068 3”
INX1522-F2 1/2” 1/2” .687 C INX1541-S1C 3/8” 3/8” .500 4-1/2”
INX1524-F3 5/8” 3/4” .750 C INX1543-S2C 1/2” 1/2” .687 4-1/2”
INX1526-F4 3/4” 3/4” .817 C INX1545-S3C 5/8” 3/4” .750 4-1/2”
INX1528-F6 1” 1” 1.062 C INX1547-S4C 3/4” 3/4” .817 4-1/2”
INX1530-F8 1-1/4” 1-1/4” 1.375 C INX1549-S6C 1” 1” 1.062 4-9/16”
INX1532-F10 1-1/2” 1-1/2” 1.625 C INX1551-S8C 1-1/4” 1-1/4” 1.375 4-5/8”
INX1534-F11 1-3/4” 2” 1.875 C INX1553-S10C 1-1/2” 1-1/2” 1.625 4-3/4”
INX1536-F12 2” 2” 2.062 C INX1555-S11C 1-3/4” 2” 1.875 4-13/16”
INX1538-F13 2-1/2” 2-1/2” 2.500 C INX1557-S12C 2” 2” 2.062 4-13/16”
INX1576-F14 3” 3” 3.068 C INX1559-S13C 2-1/2” 2-1/2 “ 2.500 4-15/16”
INX1578-F15 3-1/2” 3-1/2” 3.548 C INX1560-S14C 3” 3” 3.068 5-1/8”

www.manning-electric.com
Stocking Distributor for
Pauluhn Electric Mfg., LLP

154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
151 4/26/06 8:46 PM Page 1

154-06

PAULUHN ELECTRIC MANUFACTURING, LLP


WATERPROOF CORROSION RESISTANT HID FIXTURES
ENCLOSED & GASKETED FOR HAZARDOUS LOCATIONS
U.L. 1598A, 844 NEMA 4X U.S.C.G. IP66
CLASS I DIVISION 2 GROUPS A, B, C & D
CONSTRUCTION: 316 stainless steel construction including
mount, housing, cover, and guard. Also available in copper free
marine grade powder coated aluminum. The unit is provided with
six positive-locking spring loaded stainless steel latches for easy
access to the interior components. The unit uses a quick
electrical disconnect for the removal of the components
housing without using any tools.
GUARD: The stainless steel open bottom guard allows direct
access to the globe for easy relamping (Mogul base only).
GLOBE: Heat and impact resistant internally fluted glass.
Product line can be ordered in two ways, as a complete
fixture or as fixture fittings for stocking purposes. To order
as a complete fixture, simply choose from the categories below;
your Lamp type, Fixture material, Mount type, Mount material, LXSP3S25G12EP
Wattage, Guard, Voltage and Options. To order as Fixture fittings,
there are three basic components you need to specify:
1. Ballast Cover Assembly (ballast components, tray, cover, globe,
base & guard), 2. Fixture body (housing & electrical disconnect),
3. Mounts (hardware & gaskets), plus optional reflectors. To order
TEMP. CODE T2A
a Ballast Cover Assembly, use the same selection guide, omitting
categories 3 & 4. For other Fixture fittings, specify INX# under
Fixture Fittings and add suffix from category #3 for mounts. ZLXSP3S25G12N
For a mogul base fixture, add prefix “Z“ to catalog number
as shown on example below.

EXAMPLE: Ordering a complete fixture


ZLX S P3 S 25 G 12 N
1 2 3 4 5 6 7 8

EXAMPLE: Ordering as Ballast Cover Assembly


ZLX S 25 G 12 N ZLXSP3S25G12L

1 2 5 6 7 8

Z Mogul Base Series Mounting Type & Outlets (cont’d.) Wattage (cont’d.) Voltage (cont’d.)
1 Lamp Type -C3 3/4” Ceiling-2 Way -70 70W (LX*, MH) -20 208VAC
-LX High Pressure Sodium -C4 3/4” Ceiling-4 Way -75 75W (MV) -24 240VAC
-MH Metal Halide -C5 1“ Ceiling-4 Way -10 100W ( LX*, MH, MV*) -27 277VAC
-MV Mercury Vapor -P1 1“ Pendant Mount -15 150W (LX*, MH) -48 480VAC
-P3 3/4” Pendant Mount -17 175W (MH*, MV*) -MT 120/208/240/277
2 Fixture Material -S 1-1/4” Stanchion -20 200W (LX*) (For 50 Hz consult the Factory)
-A Aluminum -S1 1-1/2” Stanchion -25 250W (LX*, MH*, MV*)
-S 316 Stainless Steel * AVAILABLE FOR MOGUL BASE 8 Options
4 Mounting Material -EP Electro-Polish
3 Mounting Type & Outlets -A Copper-Free Aluminum 6 Guard (Option) -CG Clear Globe
-B2 1“ Wall Mount-2 Way -S Cast 316 Stainless Steel -G -LC Light Continuator
-B3 3/4” Wall Mount-2 Way -IR Instant Restrike
-B4 3/4” Wall Mount-4 Way 5 Wattage 7 Voltage -F Fused Ballast
-B5 1“ Wall Mount-4 Way -35 35W (LX) -12 120VAC -N Angle Reflector
-C2 1“ Ceiling-2 Way -50 50W (LX*, MV) -127 120/277VAC -L Shallow Dome Reflector

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-Mail: customerservices@pauluhn.com
3001 4/26/06 8:46 PM Page 1

155-06

PAULUHN ELECTRIC MANUFACTURING, LLP


DUAL RATED CLASS I DIVISION 2/ZONE 2 AND RESTRICTED BREATHING
HID MOGUL BASE FLOODLIGHT FIXTURE

Dimensions in inches/millimeters

HOUSING/LENS FRAME: Type 316 stainless steel with a natural finish.


Seam welded construction ensures restricted breathing capability.
Captive lens frame with stainless steel door retainers.
APPROVALS:
MOUNTING BRACKET: Type 316 stainless steel trunnion bracket with
• UL & cUL - Hazardous Locations Class I, Zone 2, AEx nR II T3 (USA) a natural finish. Bracket can be used for direct mounting or with optional
Ex nR II T3 (Canada) slip fitters or angle wall brackets for additional mounting preferences.
Class I, Division 2, Groups A, B, C & D Type 4X
REFLECTORS: Specular hammer tone aluminum combined with a
Class I, Zone 2, Groups IIA, IIB, IIB + H2 and IIC
vertical lamp maximizes light distribution.
• UL 1598A - Marine Outside Type Saltwater
CABLE ENTRIES: Two cable entries allow feed-through/looping wiring.
• ABS The cable entries are available in 3/4” NPT as standard or with optional
• Certified IP 66 and IP 67 M25 reducer.
LENS: High impact, thermal and shock resistant tempered glass. Wide
RBF FIXTURES
NEMA 6 x 6 beam pattern. Lens is field replaceable.
Type Lamp Part No. Wt. (lbs.)* Temp. Code**
GUARD: Type 316 stainless steel wire guard also available as an
High Pressure 150w RBFLS151B 47.5 T1 / T3 option. Wire guard and visor may be installed together. (Requires
Sodium 250w RBFLS251B 56.0 T1 / T3 special lens frame.)
400w RBFLS41B 58.5 T1 / T3
VISOR: Ten inch, stainless steel shade attaches at top or bottom. Can
Mercury 175w RBFMS171B 51.5 T1 / T3
be used with wire guard. (Requires special lens frame.)
Vapor 250w RBFMS251B 50.5 T1 / T3
400w RBFMS41B 54.5 T1 / T3 BALLAST: A High Power Factor (HPF) integral ballast is supplied for
Metal 175w RBFHS171B 51.5 T1 / T3 120/208/240/277v AC 60 Hz.
Halide 250w RBFHS251B 50.5 T1 / T3 Options: 220v, 347v & 480v 60Hz; 220v 50Hz.
400w RBFHS41B 56.5 T1 / T3 LAMP TYPE: Available in mogul base High Pressure Sodium (HPS),
Pulse Start 175w RBFPS171B 51.5 T1 / T3 Pulse Start Metal Halide (PSMH), Mercury Vapor (MV) and Metal Halide
Metal Halide 250w RBFPS251B 50.5 T1 / T3 (MH). Fixtures are supplied without lamps.
400w RBFPS41B 56.5 T1 / T3 GASKETS: A one-piece molded high temperature silicone gasket
*Weight shown is for integral ballast provides an effective seal between the lens and housing.
OPERATING TEMPERATURE (at 400w):
**T1 for Class I Div 2/Zone 2 / T3 for Class I Zone 2 AEx nR
HPS & PSMH: -40°C to 50°C MV & MH: -30°C to 50°C
SPARE PARTS
BALLASTS LAMPS LAMPHOLDERS INX4100
High Pressure Sodium High Pressure Sodium
150w INX5015 150w INX3651 MOUNTING OPTIONS
250w INX5021 250w INX3546 Surface (Aluminum or Brass) INX7007A/B
400w INX5019 400w INX3517 Pole (Aluminum or Brass) INX7006A/B
Mercury Vapor Mercury Vapor Pole (Stainless Steel) INX7006SS
175w INX5012 175w INX3539 Right Angled Wall (Stainless Steel) INX7058S
250w INX5102 250w INX3537 Crane Boom (Painted Steel) INX7001
400w INX5033 400w INX3518 Safety Cable (2 recommended) FX6806
Metal Halide Metal Halide
175w INX5022 175w INX3551 Lens/Frame/Gasket Assembly INX9062
250w INX5102 250w INX3541
Lens/Frame/Gasket Assembly for Guard/Visor INX9063
400w INX5033 400w INX3524
Pulse Start Metal Halide Pulse Start Metal Halide
175w INX5244 175w INX3732 Guard INX1064
250w INX5245 250w INX3733 Visor INX6261
400w INX5246 400w INX3734

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-mail: customerservices@pauluhn.com
0150-04 4/26/06 8:47 PM Page 1

156-06

PAULUHN ELECTRIC MANUFACTURING, LLP


WATERTIGHT VAPORPROOF HID FLOODLIGHTS
ENCLOSED & GASKETED FOR HAZARDOUS LOCATIONS
U.L. 1598A, 844 NEMA 4X U.S.C.G. IP67 ABS – Class I Division 2 Groups A, B, C & D

NHIDLS4IB NHIDLS10IB

CONSTRUCTION: The lens frame and mounting brackets are made GASKETS: One piece, molded, high temperature silicone gasket
of 316 stainless steel. The housing is available in 316 stainless steel, for long lasting watertight seal.
natural finish for a completely stainless steel fixture. Also available REFLECTOR: Highly specular hammertone aluminum.
in marine grade aluminum, polyester powder coated or Brass.
Lamps are not included. OPTIONS: The following options are available by adding the
following suffix to the catalog number:
BALLAST: The ballast supplied is a high power factor, multi-tap, “-LC” for Aux. Quartz Light (Light continuator), “-RB” for Remote
120/208/240/277V 60 Hz. Other voltages are available as options. Ballast, “-IR” for Instant Restrike* (HPS ONLY), “-F” for Fused Ballast,
FEATURES: Eight positive-locking spring loaded, stainless steel hinged (not for 1000w), “-486” for 480V 60 Hz. Ballast, “-CB” for Housing
latches for easy access to the interior components. By changing modified to accept Crane Boom Mount (INX7001). Also available
only four screws on the two hinges, the unit can be opened in any optional Shock mounts, Lens guards, Visor, Shock and Vibration lamp
of four directions. support, 220V 50 Hz. Ballast and other voltages.
LENS: The high impact tempered glass lens is thermal and shock resistant.
Watt Material Weight Temperature Code Cat. No.
HIGH PRESSURE SODIUM 70-1000W
70W Stainless 23 lbs. T2B NHIDLS7IB
70W Aluminum 21 lbs. T2B NHIDLA7IB
100W Stainless 25 lbs. T2B NHIDLS1IB
100W Aluminum 23 lbs. T2B NHIDLA1IB
150W Stainless 27 lbs. T2B NHIDLS15IB
150W Aluminum 24 lbs. T2B NHIDLA15IB
250W Stainless 42 lbs. T1 NHIDLS25IB
250W Aluminum 32 lbs. T1 NHIDLA25IB
400W Stainless 48 lbs. T1 NHIDLS4IB
400W Aluminum 38 lbs. T1 NHIDLA4IB
1000W Stainless 98 lbs. — NHIDLS10IB
1000W Aluminum 70 lbs. — NHIDLA10IB
MERCURY VAPOR 100-1000W
100W Stainless 24 lbs. T2B NHIDMS1IB
100W Aluminum 22 lbs. T2B NHIDMA1IB
175W Stainless 26 lbs. T2B NHIDMS17IB
175W Aluminum 23 lbs. T2B NHIDMA17IB
250W Stainless 38 lbs. T1 NHIDMS25IB
250W Aluminum 31 lbs. T1 NHIDMA25IB
400W Stainless 41 lbs. T1 NHIDMS4IB
400W Aluminum 34 lbs. T1 NHIDMA4IB
1000W Stainless 70 lbs. — NHIDMS10IB
1000W Aluminum 55 lbs. — NHIDMA10IB
METAL HALIDE 175-1000W
175W Stainless 29 lbs. T2B NHIDHS17IB
175W Aluminum 27 lbs. T2B NHIDHA17IB
250W Stainless 36 lbs. T1 NHIDHS25IB
250W Aluminum 33 lbs. T1 NHIDHA25IB
400W Stainless 44 lbs. T1 NHIDHS4IB
400W Aluminum 35 lbs. T1 NHIDHA4IB
1000W Stainless 75 lbs. — NHIDHS10IB
1000W Aluminum 60 lbs. — NHIDHA10IB

Florida Marine Products, Inc.


FLORIDA 2001 E. 5th Ave. Tampa, FL 33605
WHOLESALE Phone: 1-800-952-2283
Fixtures • Fittings • Ship Board Cable MARINE PRODUCTS Fax:
1-813-248-2283
1-813-247-7105
IN STOCK SAME DAY SHIPPING
INC. E-mail: fl-marine@ij.net
Web: www.fmpusa.com
153 4/26/06 8:48 PM Page 1

157-06

PAULUHN ELECTRIC MANUFACTURING, LLP


INCANDESCENT TABLE LAMP FLUORESCENT BERTH &
U.L. 1571 MARINE-U.S.C.G. ABS MIRROR LIGHT
INCANDESCENT U.L. 1598A Inside Type U.S.C.G.
MIRROR/DESK OR BERTH LIGHT
Wall Mounting With Outlet
and Toggle Switch
U.S.C.G. Approved
U.L. Listed 1598A ABS • The body is made of extruded copper free marine-
grade aluminum, with an oven cured polyester
1017B Inside Type Marine 120VAC 60 Hz powder coated white gloss protective finish.
• The lens is extruded clear, high impact DR acrylic,
fluted.
• Supplied with one or two 8W T5 fluorescent lamps
(FBL18) or one 17W T8 fluorescent lamp (FBL117).
• The reflector is aluminum, matte finished.
Description Cat. No. Weight • The ballast for the FBL18 is low power factor, pre-
Aluminum Table Lamp 1017B 4 lbs. heat type, momentary contact, 120V 60 Hz.
• The ballast for the FBL117 is an electronic ballast
CONSTRUCTION: Robust base in polyester coated type, 120V 60 Hz.
steel. Polished brass center column. SWITCH: A • The switch is an on/off push button type,
double pole toggle switch is standard. LAMP TYPE: momentary contact.
Max. 150W A-21 medium base incandescent lamp. Adjustable Shade, 60W lamp
• One 3/4” and one 1/2” knockouts are provided on
Not included. SHADE: White polyplastic belque with Aluminum—Cat. No. 1060A the back.
taped edgings is standard. PEDESTAL: The standard
unit is provided with a 4-1/2” Sq. pedestal base. Description Lamp Size Aluminum Cat. No.
MOUNTING: 1/4” threaded pipe and lock nuts are Berth & Mirror Light (1)-8WT5 FBL18
provided for permanent table mounting. CORD &
(2)-8WT5 FBL28
PLUG: Provided with an 8’, three conductor, SJT cord
and molded plug. Berth & Mirror Light (1)-17WT8 FBL117

HAZARDOUS LOCATION & PAINT SPRAY AREAS


EXPLOSION PROOF FLUORESCENT FIXTURES
U.L. 1598A, 824, 844, 924, 1570 NEMA 4X & 7 – CLASS I DIVISION 1 GROUPS E, F & G, CLASS III
20/35W—22-1/2” Ø 3/8
40/110W—23-1/2” – 46” 2 MTG HOLES
ADJUSTABLE MTG

9-1/4”

20/35W—30”
FEPR240A FEPR240A-CY4 40/110W—54” 11-1/2”

CONSTRUCTION: A corrosion resistant copper free marine grade cast aluminum or


cast brass with stainless steel hardware. Factory sealed, no external seals required. GUARD: A stainless steel guard is optional.
The threaded access caps provide easy access to the wiring compartment, and WIRING: Each unit is supplied completely wired with seal-offs and 100 feet
relamping from either end of the fixture. of 12-3 S.O. cable.
REFLECTOR: Aluminum with a white high gloss polyester powder coating. REGLOBE: The patented design permits easy replacement of the globe assembly
BALLAST: The ballast supplied is H.P.F. 120V, 60 Hz. 20W and 40W units are rated without completely overhauling the entire fixture.
for temperatures down to 0°F; 35, 60 and 110W units are rated for starting in -20° F. OPTIONS: The following factory installed options are available by adding the
Others are available as options. appropriate suffix to the catalog number:
LAMPHOLDER: The spring loaded lampholders provide positive electrical contact “EM” for Emergency ballast, “F” for Fused ballast, “226” for 220V 60 Hz, “276” for
and maximum resistance to shock and vibration. 277V 60 Hz, “225” for 220V 50 Hz, “12” for 12VDC, “24” for 24VDC, “48” for
LAMP TYPE: All units are supplied complete with lamps. Available in two, three or 48VDC, “TB” for Terminal block, “NP” for Bronze, Nickel plated, End caps, “INSP”
four lamp modules with a variety of lamp types. (See chart below) for Cover with Inspection hole and access cap, “PNT” for Paint spray areas, “TLT”
No. of Lamp Aluminum Aluminum for Tilt mount bracket, “SM” for Shock and Vibration mount, “GRD” for Stainless
Description Lamps Type Weight Cat . No. Steel guard, “CY4” for Pendant mount.
One 28 lbs. (12.73 kg) FEPR120A
20 Watt Two 32 lbs. (14.55 kg) FEPR220A
F20T12
Trigger Start Three 39 lbs. (17.73 kg) FEPR320A No. of Lamp Aluminum Aluminum
Four 64 lbs. (29.09 kg) FEPR420A Description Lamps Type Weight Cat . No.
One 31 Ibs. (14.09 kg) FEPR135A One 48 lbs. (21.82 kg) FEPR160A
35 Watt 60 Watt
Two 35 lbs. (15.91 kg) FEPR235A Two 56 lbs. (25.45 kg) FEPR260A
High Output F24T12/HO High Output F48T12/HO
Three 42 lbs. (19.09 kg) FEPR335A Three 63 lbs. (28.64 kg) FEPR360A
800 MA 800 MA
Four 70 lbs. (31.82 kg) FEPR435A Four 99 lbs. (45.00 kg) FEPR460A
One 46 lbs. (20.91 kg) FEPR140A 110 Watt One 49 lbs. (22.27 kg) FEPR1110A
40 Watt
Two 54 lbs. (24.55 kg) FEPR240A Two 57 lbs. (25.91 kg) FEPR2110A
Rapid Start F40T12 Very High Output F48T12/VHO
Three 61 lbs. (27.73 kg) FEPR340A Three NA NA
430 MA 1500 MA
Four 95 lbs. (43.18 kg) FEPR440A Four 100 lbs. (45.45 kg) FEPR4110A

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-mail: customerservices@pauluhn.com
0152-04 4/26/06 8:49 PM Page 1

158-06

PAULUHN ELECTRIC MANUFACTURING, LLP

WATERTIGHT & VAPORPROOF FLUORESCENT FIXTURES


FOR HAZARDOUS LOCATIONS
U.L. 1598A, 844 NEMA 4X & 7 U.S.C.G. IP67 ABS
Class I Division 2 Groups A, B, C & D
FWN (Drop lens)

Mounts D
Wall 7-1/4”
Standard 6-7/8” FWFN (Flat lens)
Surface 5-3/4”
Options
Suffix Description Suffix Description
Cat. No. A B C
FWN 20W or 35W 31-1/2” 30-1/4” 29-1/4” -EP Electro-Polish (S.S.) -ES Energy Saving Ballast
FWN 40W, 60W, or 110W 55-1/2” 54-1/4” 53-1/4” -SM Shock Mount -EL Electronic Ballast
FWFN 20W or 35W 31-1/2” 30-1/4” 29-1/4” -SF Surface Mount -EM Emergency Ballast (1 lamp)
FWFN 40W, 60W, or 110W 55-1/2” 54-1/4” 53-1/4” -LL Wall Mount -EMC Emergency Ballast for cold
-PM Pipe Mount temperature applications
-PT Pendant Mount -F Fused Ballast
CONSTRUCTION: The lens frame and latches are made of stainless steel. -BC Beam Clamp with -12 12VDC
The housing and mounts are available in 316 stainless steel, natural finish S.S. Safety cable -24 24VDC
for a completely stainless steel fixture. The aluminum fixture has a & Cord connector -48 48VDC
polyester powder coated housing with mounting fittings in natural -CM Chain Mount -225 220V 50 Hz
aluminum. -TG Tempered Glass (FWFN-FWFC) -226 220V 60 Hz
BALLAST: The ballast supplied is H.P.F. 120V, 60 Hz 20W and 40W units -X Polycarbonate Drop Lens -276 277V 60 Hz
are rated for temperatures down to –18°C; 35, 60 and 110W units are
rated for starting in –29°C. Other options available (see below).
No. of Lamp Alum. Weight FWFN Alum. FWN Alum.
FEATURES: The unit is provided with positive-locking spring loaded Description
Lamps Type FWFN – FWN Cat. No. Cat. No.
stainless steel latches for a tight seal between the stainless steel frame and
17 Watt 1 18 lbs. – 18 lbs. FWFN117A FWN117A
the housing. The standard adjustable brackets allow a 110° range of
Rapid Start 2 F17T8 18 lbs. – 18 lbs. FWFN217A FWN217A
mounting positions.
265 MA 24” Lamp 3 20 lbs. – 20 lbs. FWFN317A FWN317A
REFLECTOR: White powder coated aluminum.
20 Watt 1 18 lbs. – 18 lbs. FWFN120A FWN120A
LAMP TYPE: Fluorescent lamps standard, compact fluorescent optional.
Trigger Start 2 F20T12 18 lbs. – 18 lbs. FWFN220A FWN220A
Available in one, two or three lamps.
24” Lamp 3 20 lbs. – 20 lbs. FWFN320A FWN320A
LENS: High impact resistant, drop lens acrylic for FWN series.
32 Watt 1 18 lbs. – 18 lbs. FWFN132A FWN132A
Polycarbonate flat lens for FWFN series.
Rapid Start 2 F32T8 18 lbs. – 18 lbs. FWFN232A FWN232A
OUTLETS: The units are provided with two 3/4” N.P.T. and one plug,
265 MA 48” Lamp 3 20 lbs. – 20 lbs. FWFN332A FWN332A
allowing for thru-feed service where necessary.
35 Watt 1 27 lbs. – 27 lbs. FWFN135A FWN135A
GASKETS: One continuous piece extruded black neoprene gasket which
High Output 2 F24T12/HO 27 lbs. – 27 lbs. FWFN235A FWN235A
provides an effective seal between the lens and the housing, greatly
800 MA 24” Lamp 3 29 lbs. – 29 lbs. FWFN335A FWN335A
reducing light loss and outside contamination by bugs, dirt and moisture.
40 Watt 1 18 lbs. – 18 lbs. FWFN140A FWN140A
OPTIONS: The factory installed options listed below are available by
Rapid Start 2 F40T12 18 lbs. – 18 lbs. FWFN240A FWN240A
adding the following suffix to the catalog number: 1316 for 316 grade
stainless steel, SM for shock mount, SF for surface mount, LL for wall 430 MA 48” Lamp 3 20 lbs. – 20 lbs. FWFN340A FWN340A
mount, PT for pendant mount, TG for tempered glass (FWFN), X for 60 Watt 1 33 lbs. – 33 lbs. FWFN160A FWN160A
polycarbonate drop lens, EM for emergency ballast (1 lamp), EM2 for High Output 2 F48T12/HO 33 lbs. – 33 lbs. FWFN260A FWN260A
emergency ballast (2 lamps), F for fused ballast, 226 for 220V 60 Hz, 800 MA 48” Lamp 3 35 lbs. – 35 lbs. FWFN360A FWN360A
276 for 277V 60 Hz, 225 for 220V 50 Hz, 12 for 12VDC, 24 for 24VDC, COMPACT FLUORESCENT LAMPS
48 for 48VDC. 2 18 lbs. – 18 lbs. FWFC236A FWC236A
• For emergency lighting applications below 0°C, the fixture is factory 36 Watt F39BX
4 28 lbs. – 28 lbs. FWFC436A FWC436A
modified to protect Ni-Cad batteries and emergency lamps from
2 18 lbs. – 18 lbs. FWFC240A FWC240A
temperatures down to –29°C. 40 Watt F40BX
4 28 lbs. – 28 lbs. FWFC440A FWC440A
• Beam clamp mounting kit consists of a beam clamp, a S.S. safety cable
and a cord connector. To order, add suffix “BC” to catalog number. 2 18 lbs. – 18 lbs. FWFC250A FWC250A
50 Watt F50BX
To order the individual components, use part number shown. 4 28 lbs. – 28 lbs. FWFC450A FWC450A
2 18 lbs. – 18 lbs. FWFC255A FWC255A
55 Watt F55BX
4 28 lbs. – 28 lbs. FWFC455A FWC455A

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • customerservices@pauluhn.com
0153-04 4/27/06 5:23 PM Page 1

159-06

12” Marine Fans PERKO, INC.


For Desk, Table or Heavy Duty Battery Selector Switch
Wall Mounting Ignition Protected
Built for large air displacement, the fan Make before break design, for use with two
has an ivory finish with claret colored or more batteries and single or dual engines.
Alternator field disconnect to prevent damage
blades and nickel plated wire guard.
to alternator if accidentally switched to the
Supplied with 2-speed switch incor- “OFF” position while engine is running.
porated in base, flexible cord and plug.
Fiber-reinforced polycarbonate body 1/2 inch
Catalog No. Size Voltage diameter brass battery terminals for use with
5401 12” 110 V. D.C.
systems under 50 volts.
5402 12” 220 V. D.C. Fig. 8603 Capacity – rated 380 amps, continuous, 850
5405 12” 220 V. A.C. amps. intermittent (5 minutes on, 5 minutes off).
1. Removable, nickel plated wire guard with polished solid metal ring Dimensions Face: 5-1/4 x 5-1/4 inches
2. 100% sweep oscillation Depth: 3-3/8 inches
3. Totally enclosed oscillating mechanism Display Pkg. – 2 Pkgs. 1 Pc. per Pkg.: 8603 DP
4. Base with rubber ring (will not creep or scratch furniture) Weight: 3 pounds
The products above and below this message are not available from the same manufacturing source.

PAULUHN ELECTRIC MANUFACTURING, LLP


VAPOR & WATERPROOF FIXTURES INCANDESCENT & COMPACT FLUORESCENT
30° Angle Reflector Surface or Bulkhead Mount U.L. 1598A Marine—U.S.C.G. Accepted
60 – 300W Incandescent or 3, 18, 26W Fluorescent
Cat. No. A B
1729BM 10-3/4” 11-1/4”
1729BQ 11” 11-1/4”
1729BM7 10-3/4” 11-1/4”
1729BQ7 11” 11-1/4”
1731BM8 11-7/8” 14-1/2”
1731BQ8 12-1/8” 14-1/2”
1731BM 11-7/8” 14-1/2”
1731BQ 12-1/8” 14-1/2”

CONSTRUCTION: Heavy-duty wall cast brass or copper free OPTIONS:


marine grade aluminum. Lampholder: Porcelain available, add suffix P. Shock
OUTLETS: Standard is undrilled. Available up to maximum of and vibration proof available on all lampholders, add suffix SP.
1” N.P.T. fourway. Terminal Block: Add suffix “T” for a 4 wire block (Cat. No.
REFLECTORS: Fiberglass, polyester reinforced up to 100W. ABS CX3070), add suffix “T6” for a 6 wire block (Cat. No. CX3076).
reflectors for higher wattages. Globe: Clear glass globe is standard. For color globes add suffix
LAMPHOLDER: Phenolic with nickel-plated copper screw shell. “RED”, “BLU”, “GRN”, or “YEL”.

Bronze Bronze Junction Aluminum Junction Lamp


Lamp Globe Weight Cat. No. Box Depth Guard Cat. No. Box Depth Guard Holder
INX 11 lbs. INX INX INX INX
100W
2006CLR (5 kg)
1729BM
6037B
2”
1036B
1729AM
6037A
2”
1036A INX Compact Fluorescent Lamps
12 lbs.
1729BQ
INX
2-1/4” 1729AQ
INX
2-1/4”
4000 The 13, 18 and 26W compact fluorescent lamps
6” (5.45 kg) 6057B 6” 6057A 6”
will fit the 7” units. To order, begin with the prefix
INX 11 lbs. INX INX INX INX
2007CLR (5 kg)
1729BM7
6037B
2”
1037B
1729AM7
6037A
2”
1037A INX “F” to the Cat. No., then add suffix “13”, “18” or
150W
12 lbs.
1729BQ7
INX
2-1/4” 1729AQ7
INX
2-1/4”
4000 “26”.
7” (5.45 kg) 6057B 7” 6057A 7”
INX 14 lbs. INX INX INX INX
For example: F1729BM-26
150W- 1731BM8 2” 1731AM8 2”
200W
2008CLR (6.36 kg) 6037B 1038B 6037A 1038A INX Incandescent Compact Fluorescent
15 lbs. INX INX 4028 60W = 13W
A-23 1731BQ8 2-1/4” 1731AQ8 2-1/4”
8” (6.81 kg) 6057B 8” 6057A 8”
INX 14 lbs. INX INX INX INX
75W = 18W
1731BM 2” 1731AM 2” 100W = 26W
200W- 2009CLR (6.36 kg) 6037B 1020B 6037A 1020A INX
300W 15 lbs. INX INX 4000 Based on 120V 60 Hz as standard; 277V 60 Hz is also available.
1731BQ 2-1/4” 1731AQ 2-1/4”
9” (6.81 kg) 6057B 9” 6057A 9”

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-Mail: customerservices@pauluhn.com
0154-04 4/26/06 8:50 PM Page 1

160-06

PAULUHN ELECTRIC MANUFACTURING, LLP


WATERPROOF MASTHEAD, OUTSIDE TYPE FLOODLIGHTS
RANGE & BLINKER FIXTURES U.L. 1598A Outside – Type Saltwater
U.S.C.G. Accepted
U.L. 1598A Outside Saltwater Locations

741

CONSTRUCTION: Copper free aluminum alloy or cast brass. Hand


adjustment providing near 360° in both vertical and horizontal planes.
SOCKET & WIRING: Porcelain lampholders are provided with high
1158 1159
temperature leads.
Overall Dimensions 5-3/4” x 8-5/8” LENS: Enclosed with clear thermal-shock resistant and impact lens.
CONSTRUCTION: Natural cast marine brass or copper free cast aluminum. GASKET: Silicone gasketing is provided standard.
OUTLETS: Stem mount, furnished 3/4” N.P.T. standard. HARDWARE: For rough-service areas these units can be shock mounted.
GUARD: Cast brass or copper free cast aluminum, with suffix “GRD” Indicate by adding suffix “RS” to the catalog.
added to catalog number. LAMPS: Medium flood lamps supplied with fixtures.
BOX: Furnished blank. Specify size to be drilled and tapped,
Description Catalog No. Catalog No.
3/4” N.P.T. max. Sealed Beam Brass Alum.
GLOBE: Furnished with clear globe standard. For color globe add suffix, 200W Par 46 740B 740A
Red “RED”, Amber “YEL”, Blue “BLU”, Green “GRN”. 300W Par 56 741B 741A
LAMPHOLDER: Medium base, thermoset material, vibration proof
with nickel plated shell.
QUARTZ
Description
A-19
Catalog No.
Brass
Catalog No.
Alum.
FLOOD
Pendant 100W 1158B 1158A LIGHTS
Box 100W 1159B 1159A

QS1605

CONSTRUCTION: Housings are made of corrosion resistant copper-free


aluminum or stainless steel, polyester powder coated black. The unit is
provided with positive locking, spring loaded stainless latches for a tight seal
between the frame and housing. The unit comes with a terminal tube and 6’
long cable.
LENS: Thermal and shock resistant high impact tempered glass is standard.
GASKET: One piece extruded, high temperature, red silicone gasket for a long
lasting watertight seal.
1162 1163 REFLECTOR: A highly specular hammertone aluminum.
MOUNTING: The standard unit is provided with a stainless steel trunnion mount.
Overall Dimensions 5-3/8” x 11-1/2”
LAMPS: 300W 120V tungsten halogen 300T3Q/CL or 500W 120V tungsten
CONSTRUCTION: Natural cast marine brass or copper free cast aluminum. halogen 500WT3Q/CL lamps are included. 1000W tungsten halogen
OUTLETS: Pendant furnished 1/2” N.P.T. 1000T3Q/CL or 1500W tungsten halogen 1500T3Q/CL lamps are not
GUARD: Cast brass or copper free cast aluminum, with suffix “GRD” included, unless voltage is specified by adding suffix “-208“, “-220“ or “-240“.
added to part number INX1038. LAMPHOLDER: Spring loaded lampholders are provided to reduce shock and
GLOBE: Furnished with clear globe standard. For color globe add suffix, vibration for a longer lamp life.
Red “RED”, Amber “YEL”, Blue “BLU”, Green “GRN”. OPTIONS: Guard: A stainless steel wire guard is available. Add suffix “GRD”.
LAMPHOLDER: Medium base, thermoset material, vibration proof Visor: A top and side visor are available on application. Add suffix “TV“.
with nickel plated shell. S.S. Alum. Brass
Description Lamp Size S.S. Weight Cat. No. Cat. No. Cat. No.
Description Catalog No. Catalog No. 300W Quartz 300W Halogen 14 lbs. (6.36 kg) QS1603 QA1603 QB1603
A-23 Brass Alum. 500W Quartz 500W Halogen 14 lbs. (6.36 kg) QS1605 QA1605 QB1605
Pendant 150W 1162B 1162A 1000W Quartz 1000W Halogen 16 lbs. (7.27 kg) QS1610 QA1610 QB1610
Box 150W 1163B 1163A 1500W Quartz 1500W Halogen 16 lbs. (7.27 kg) QS1615 QA1615 QB1615

Florida Marine Products, Inc.


FLORIDA 2001 E. 5th Ave. Tampa, FL 33605
WHOLESALE Phone: 1-800-952-2283
Fixtures • Fittings • Ship Board Cable MARINE PRODUCTS Fax:
1-813-248-2283
1-813-247-7105
IN STOCK SAME DAY SHIPPING
INC. E-mail: fl-marine@ij.net
Web: www.fmpusa.com
157 4/26/06 8:51 PM Page 1

161-06

COOPER BUSSMANN
For Class J Dimension Fuses
FUSE REDUCERS 600 Volt No. Lbs. per
100 pair
60 to 30 amp..........................J63.......................3-3/4
Fuse reducers make it possible to use fuses of a smaller size than 100 to 30 amp..........................J13.......................17-1/4
the fuse clips are intended to hold. Reducers fit into any panel or 100 to 60 amp..........................J16.......................18-1/2
switch – even the dead front type where space is restricted. They 200 to 30 amp..........................J23.......................32
200 to 60 amp..........................J26.......................25-1/2
are designed to compensate for dimensional changes resulting from 200 to 100 amp..........................J21.......................13-1/2
normal temperature variations of the fuse or fuseholder. 400 to 100 amp..........................J41.......................49
400 to 200 amp..........................J42.......................27-1/2
600 to 100 amp..........................J61.......................79
For Standard Dimension Fuses 600 to 200 amp..........................J62.......................59-1/2
600 to 400 amp..........................J64.......................35-1/2
Listed by Underwriters’ Laboratories, Inc.
250 Volt No. Lbs. per 600 Volt No. Lbs. per
100 pair 100 pair
60 to 30 amp............................263.......................3-3/4 60 to 30 amp..........................663.......................10
100 to 30 amp............................213.....................17-1/4 100 to 30 amp..........................216.......................17-1/4
100 to 60 amp............................216.....................17-1/4 100 to 60 amp..........................616.......................18-1/2
200 to 60 amp............................226.....................30 200 to 60 amp..........................626.......................33-1/4
200 to 100 amp..........................2621.....................16-1/4 200 to 100 amp........................2621.......................16-1/4
400 to 100 amp..........................2641.....................49 400 to 100 amp........................2641.......................49
400 to 200 amp..........................2642.....................35 400 to 200 amp........................2642.......................35
600 to 100 amp..........................2661.....................87 600 to 100 amp........................2661.......................87
600 to 200 amp..........................2662.....................68-1/2 600 to 200 amp........................2662.......................68-1/2
600 to 400 amp..........................2664.....................44-1/2 600 to 400 amp........................2664.......................44-1/2

The products listed above and below this line are not available from the same manufacturing source.

PAULUHN ELECTRIC MANUFACTURING, LLP

INCANDESCENT HAZARDOUS LOCATIONS LIGHTING


Explosion Proof Incandescent Hazardous Location Fixtures
U.L. 1598A, 844 NEMA 4X & 7 U.S.C.G.
Class I Div. 1 Groups C & D
Lamp Bronze Bronze Aluminum
Description
Size Weight Cat. No. Cat. No.
Ceiling type 60-100W 20.2 lbs. (9.18 kg) EPC30B EPC30A
less reflector 100-200W 22.0 lbs. (10.00 kg) EPC31B EPC31A
Ceiling type 60-100W
25.8 lbs. (11.73 kg) EPC33B EPC33A
EPB47A EPC31A EPP39A standard dome reflector 100-200W
Ceiling type 60-100W 21.5 lbs. (9.77 kg) EPC34B EPC34A
CONSTRUCTION: Heavy wall cast brass or copper free shallow dome reflector 100-200W 25.0 lbs. (11.36 kg) EPC35B EPC35A
aluminum. Factory sealed enclosures designed for locations where Ceiling type 60-100W 23.0 lbs. (10.45 kg) EPC36B EPC36A
flammable gases or corrosive atmospheres are usually present. 30° angle reflector 100-200W 25.0 lbs. (11.36 kg) EPC37B EPC37A
REFLECTORS: Available with white impact resisting ABS reflector. Pendant type 60-100W 18.3 lbs. (8.32 kg) EPP38B EPP38A
The bulkhead type fixtures will only accept angle reflectors. less reflector 100-200W 20.0 lbs. (9.09 kg) EPP39B EPP39A
Pendant type 60-100W
LAMP TYPE: For 60-100W fixtures use 100W A-19 maximum 23.8 lbs. (10.82 kg) EPP41B EPP41A
standard dome reflector 100-200W
lamp size. For 100-200W fixtures use 200W A-21 maximum lamp
Pendant type 60-100W 19.5 lbs. (8.86 kg) EPP42B EPP42A
size. Colored interior globes can only accommodate an A-19
shallow dome reflector 100-200W 23.0 lbs. (10.45 kg) EPP43B EPP43A
lamp. (Lamps are not included with the fixture.)
Pendant type 60-100W 21.0 lbs. (9.55 kg) EPP44B EPP44A
LAMPHOLDERS: Medium base, vibration proof with nickel plated 30° angle reflector 100-200W 22.8 lbs. (10.23 kg) EPP45B EPP45A
screw shells for positive electrical contact. Bulkhead type 60-100W 27.3 lbs. (12.41 kg) EPB46B EPB46A
GUARD: Heavy web cast brass or aluminum. less reflector 100-200W 29.0 lbs. (13.18 kg) EPB47B EPB47A
GLOBE: Heat and impact resistant clear explosion proof glass. Bulkhead type 60-100W
30.0 lbs. (13.64 kg)
EPB48B EPB48A
OUTLETS: Furnished with one 1/2” N.P.T. hole. 30° angle reflector 100-200W EPB49B EPB49A

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-mail: customerservices@pauluhn.com
158 4/26/06 8:52 PM Page 1

162-06

PAULUHN ELECTRIC MANUFACTURING, LLP

WATERTIGHT VIBRATION PROOF INCANDESCENT FLOODLIGHTS


U.L. 1598A, 844 NEMA 4X & 7 Hazardous Location
Class I Division 2 Groups A, B, C & D

746A 746AQHDL 749AHDLGRD


CLASS I DIV. 2 CLASS I DIV. 2

CONSTRUCTION: Heavy wall cast bronze or cast aluminum Lamp Type: For alternative lamps add the following suffixes
enclosure. The aluminum units are furnished with a baked white to the catalog number: for a narrow spot, 120V lamp, add
epoxy coating. Both models are supplied with a unique lamp suffix “NSP”; wide flood, 120V lamp, add suffix “WFL”;
suspension system. 28V, 450W medium flood lamp, add suffix “-28”; 12V
DIFFUSER: Clear heat resistant glass lens is standard. 300W medium flood lamp, add suffix “-12”. Handle: For
the model with a handle and hand clamp, add suffix “HDL”.
LAMP TYPE: 120VAC medium flood PAR 56 lamps are furnished.
LAMPHOLDER: Mogul end prong porcelain lampholders
complete with high temperature leads are standard. Low voltage
(12V or 28V) units are screw terminal lamps and are supplied with
high temperature leads wired directly to the lamp. Description Alum. Weight Bronze Cat. No. Alum. Cat. No.
300W Incandescent 55.9 lbs. (25.41 kg) 746B 746A
OUTLETS: Furnished with one 1/2” N.P.T. outlet. Can be supplied
500W Quartz Halogen 55.9 lbs. (25.41 kg) 746BQ 746AQ
with a maximum 3/4” N.P.T.
500W PAR64 Inc. 20 lbs. (9.09 kg) 749B 749A
OPTIONS: Guard: An optional stainless steel wire guard is 1000W PAR64 Qtz Hal. 20 lbs. (9.09 kg) 749BQ 749AQ
supplied when suffix “GRD” is added to the catalog number.

WATERTIGHT EXPLOSION PROOF INCANDESCENT ROTATING BEACONS


U.L. 1598A, 844, 1638 NEMA 4X & 7 U.S.C.G.
Class I Division 1 Groups C & D

EPC7004AGRD EPP7004AGRD EPB7004AGRD

CONSTRUCTION: Heavy wall cast brass or copper-free OPTIONS: Guard: An optional cast guard is supplied when the
aluminum designed for locations where flammable gases or suffix “GRD” is added to the catalog number. Globe: For color
corrosive atmospheres are usually present. globes add suffix “RED”, “BLU”, “GRN” or “YEL”. Outlets: Junction
LAMP TYPE: A T4 100W Quartz halogen lamp of the appropriate box and bulkhead models can be supplied with a maximum of four
supply voltage is included. 1” N.P.T. holes on application. Pendant models can be supplied
GLOBE: Heat and impact resistant explosion proof glass globe with a maximum of one 1” N.P.T. hole on application.
is furnished.
OUTLETS: Furnished with one 1/2” N.P.T. outlet. Bronze Bronze Aluminum
Description
Weight Cat. No. Cat. No.
INTERIOR: A 120VAC interior is furnished with the catalog
Junction box type 51.0 lbs. (23.18 kg) EPC7004B EPC7004A
numbers shown. The fixtures can be supplied in 240VAC
Pendant type 49.5 lbs. (22.50 kg) EPP7004B EPP7004A
by adding the suffix “-4”,12VDC and 24VDC with suffix
Bulkhead type 56.5 lbs. (25.68 kg) EPB7004B EPB7004A
“-5” and “-6”.

TODD MARINE ELECTRICAL SUPPLY


3411 Progress Road, Norfolk, VA 23502
Ph: (757) 855-3111 or (800) 304-8633 • Fax: (757) 857-1665
www.toddmarine.net
PLEASE SEE OUR AD IN THE ADVERTISING SECTION
0157-04 4/26/06 8:53 PM Page 1

163-06

PAULUHN ELECTRIC MANUFACTURING, LLP


WATERTIGHT HAZARDOUS LOCATION INCANDESCENT FIXTURES
U.L. 1598A, 844 CLASS I DIV. 2 – NEMA 4X & 7 U.S.C.G.

717AQ7D2
727AM7D2
707AM7D2

CONSTRUCTION: Rugged heavy wall cast brass or cast OPTIONS: Globe: A fluted globe available on request.
aluminum housings. All fixtures are designed to prevent the Lampholder: A shock-proof lampholder is available on request
entrance of dirt, moisture and corrosive vapors into the interior (INX4000SP).
of the fixtures. Lamp Bronze Bronze Aluminum
Description
FINISH: Natural casting is standard. Size Weight Cat. No. Cat. No.
TERMINAL BLOCK: A four wire terminal block is furnished in the Ceiling mount 150W
6.25 lbs. (2.84 kg) 717BM7D2 717AM7D2
fixture’s junction box. round box A-21
Ceiling mount 150W
LAMP TYPE: Maximum 150W A-21 lamp size (not included with 7.50 lbs. (3.41 kg) 717BQ7D2 717AQ7D2
square box A-21
the fixture).
Bulkhead mount 150W
LAMPHOLDER: Phenolic with a nickel-plated copper screw shell. 7.751b (3.52 kg) 707BM7D2 707AM7D2
round box A-21
GLOBE: Clear glass is standard. Bulkhead mount 150W
7.75 lbs. (3.41 kg) 707BQ7D2 707AQ7D2
OUTLETS: Junction box units are supplied drilled and tapped 3/4” square box A-21
N.P.T. four-way with three plugs. Drilling and tapping, other than 150W
Pendant mount 6.50 lbs. (2.95 kg) 727BM7D2 727AM7D2
standard, can be supplied on application with three plugs, or to A-21
specification.

WATERTIGHT HAZARDOUS LOCATION


INCANDESCENT HELIPORT DECK LIGHTS
U.L. 1598A, 844 NEMA 4X & 7 U.S.C.G. – Class I Division 2 Groups A, B, C & D

1158AD2 1159AD2

CONSTRUCTION: Heavy wall cast brass or cast aluminum (Cat. No. CX3070), (Box type only). Lampholder: Porcelain
enclosure and guard. Natural finish is standard. The unique available, (Cat. No. INX4000P) shock and vibration
double-gasketed design prevents the entrance of water far in proof available on all lampholders, add suffix “SP”
excess of U.L. requirements for water tightness. (Cat. No. INX4000SP). Outlet: The fixtures can be supplied with
LAMP TYPE: 100W A-19 max. for CLR, YEL, GRN & RED. 40W up to four 1” N.P.T. holes. The pendant model can be supplied
max. with up to one 1” N.P.T. mounting hole. Drilling and tapping,
A-19 for BLU (not included with the fixtures). other than standard, can be supplied on application. Globe: For
color globes add suffix “RED”, “BLU”, “GRN” or“YEL”.
LAMPHOLDER: Medium base with a nickel-plated copper
screw shell. Lamp
Bronze Bronze Aluminum
Weight Cat. No. Cat. No.
MOUNTING: The junction box model has two external mounting
legs. Pendant models have one 1/2” N.P.T. hole in the center Pendant mount 7 lbs. 1158BCLRD2 1158ACLRD2
(3.12 kg)
of the box.
8 lbs.
OUTLETS: The junction box model is supplied drilled and tapped Junction box mount 1159BCLRD2 1159ACLRD2
(3.62 kg)
with one 1/2” N.P.T. one way. Pendant mount 8 lbs.
1158BCLRGRDD2 1158ACLRGRDD2
GLOBE: Clear high impact fresnel glass globe is standard. with guard (3.62 kg)
OPTIONS: Finish: Finishes other than natural are available on Junction box mount 9 lbs
1159BCLRGRDD2 1159ACLRGRDD2
with guard (4.08 kg)
request. Terminal Block: Add suffix “T” for a four wire block

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-Mail: customerservices@pauluhn.com
0158-04 4/27/06 5:28 PM Page 1

164-06

PAULUHN ELECTRIC MANUFACTURING, LLP


XENON STROBE WARNING LIGHTS
WATERPROOF OR EXPLOSIONPROOF U.L. MARINE, U.S.C.G., HAZARDOUS LOCATIONS
CLASS I DIVISION 1, GROUPS C & D

EXPLOSIONPROOF OPTIONS:
CONSTRUCTION: Heavy wall copper-free cast aluminum or brass Globe: For a color fresneI interior globe add suffix
designed for locations where flammable gases or corrosive atmospheres RED, BLU, GRN or YEL to the catalog number.
are usually present. The aluminum fixtures are supplied with red powder Circuit Board: A variety of optional primary voltages
coating as standard. are supplied with a dash number suffix: 12VDC, “-5”;
LAMP TYPE: A xenon strobe lamp is included. 24VDC, “-6”; 240VAC, 50 Hz or 60 Hz “-4”.
GUARD: Heavy web cast brass or aluminum. Guards are furnished as
Outlets: The junction box and bulkhead models can be
supplied with a maximum of four 1” N.P.T. holes on
standard.
application. The pendant models can be supplied
GLOBE: A clear heat and impact resistant explosion proof glass with a with a maximum of one 3/4” N.P.T. hole.
smooth exterior. An interior clear fresnel globe is furnished in the catalog EPN7000A
numbers shown. Description Bronze Bronze Aluminum
Weight Cat. No. Cat. No.
CIRCUIT BOARD: Furnished with 120VAC, 50 Hz or 60 Hz and a plastic
fresnel globe. The flash rate of the standard unit is factory adjusted from Junction Box Type 22 lbs. (10.00 kg) EPN7000B EPN7000A
60 to 90 flashes per minute. Pendant Type 20 lbs. (9.09 kg) EPN7001B EPN7001A
OUTLETS: All units are furnished with one 1/2” N.P.T. hole. Bulkhead Type 29 lbs. (13.18 kg) EPN7002B EPN7002A

WATERPROOF
CONSTRUCTION: Heavy wall cast brass or cast aluminum with natural OUTLETS: All models are supplied drilled and tapped
finish. 1/2” N.P.T. The fixture can be supplied with up to 1”
GLOBE: Clear high impact fresnel glass globe is standard (Cat. No. N.P.T. mounting hole. The junction box model is
INX2058CLR ). For color globes add suffix RED, BLU, GRN or YEL. furnished with 3/4”.
GUARD: A guard is not provided on standard unit. Add suffix GRD Max 1” N.P.T. fourway.
for heavy cast brass or aluminum guard (INX1004). LAMP: A xenon strobe lamp is included (INX3724).
CIRCUIT BOARD: The catalog numbers shown are furnished with input TERMINAL BLOCK: Add suffix T for a 4-wire block for
circuit boards 120VAC, 240VAC or 12-48VDC. The flash rate of the box type only .
standard unit is factory adjusted in a range of 75 to 85 flashes/min.
7120AC

Lamp Globe Bronze Weight Bronze Cat. No. Guard Aluminum Cat. No. Guard
Xenon Strobe Stem Mount INX2058CLR 8 lbs. (3.60 kg) 7120BC INX1004B 7120AC INX1004A
Xenon Strobe Box Type INX2058CLR 9 lbs. (4.05 kg) 7121BC INX1004B 7121AC INX1004A

CORD CONNECTOR & PLUG – PIN & SLEEVE TYPE 422FC-125


U.S.C.G. Accepted, U.L. 498, Plugs and Receptacles
CONSTRUCTION: ABS high impact plastic, a series of plug and cord connectors that are suited for corrosive
saltwater areas as well as petro-chemical operations. The standard threaded thermoplastic plug and connector,
which are interchangeable with existing equipment, are yellow colored to meet O.S.H.A. requirements.
RATINGS: 20 amp 600V AC, 2 pole 3 wire, 3 pole 4 wire. Specify voltage as a suffix.
Catalog No. Catalog No. Catalog No.
420PP-125
Description Plug Only Female Complete Cord
Male End End Connector
2 Pole 3 Wire *420PP 422FC 426PC
3 Pole 4 Wire *420-4PP 423-FC 426-4PC
*Available in reverse service. Add suffix “RS” to catalog number.

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • customerservices@pauluhn.com
0159-04 4/26/06 8:54 PM Page 1

165-06

PAULUHN ELECTRIC MANUFACTURING, LLP

ARCHITECTURAL EXIT SIGNS FLUORESCENT OR INCANDESCENT


ABS
CONSTRUCTION: The housing and the diffuser frame are made
of corrosion resistant aluminum with a polyester powder coated
finish.
LAMP TYPE: The fluorescent model has one 8W T5 cool white
lamp (included). The incandescent model has one 25W T6 lamp
F1ACFGWEXERAL
(included).
DIFFUSER: The polished acrylic diffuser panel has precision
engraved “EXIT” letters. Color of letters and background, single or
double face and arrow direction can be found in the catalog chart. OPTIONS:
REFLECTOR: Aluminum with a white high gloss polyester powder Ballasts: Emergency ballast available for fluorescent only.
coat finish for the fluorescent model and highly specular ALZAK Diffuser: Standard language is English. Please specify other
aluminum for the incandescent version. language.
BALLAST: A low power factor 120V 60 Hz ballast is provided
for fluorescent model.

CATALOG CHART
1 2 3 4 5 6 7 8
1 I = incandescent 4 Mounting 6 Arrow Direction 7 EM = Emergency Ballast
F = fluorescent W = wall BLANK = no arrow
C = ceiling EXER = emergency exit 8 Input Voltage
2 Number Of Faces WF = wall recessed AR = right arrow BLANK = 120V 60 Hz
1 = single face CF = ceiling recessed AL = left arrow 226 = 220V 60 Hz
2 = double face DA = dual arrow 225 = 220V 50 Hz
5 Letters/Background DAU = dual arrow up 276 = 277V 60 Hz
RW = red on white AURS = arrow up right side
3 Material GW = green on white AULS = arrow up left side
A = Aluminum

FLUORESCENT EXIT LIGHTS


ABS
CONSTRUCTION: A corrosion resistant aluminum housing with a
high gloss polyester powder coated finish and a white ABS cover.
By loosening four captive knurled thumb screws, the cover can be
removed permitting easy relamping.
LAMP TYPE: Two cool white T5 8W fluorescent lamps are
standard.
LENS: The unit has two lenses with “EXIT“ in red letters on a
translucent white background.
REFLECTOR: Aluminum with a high gloss white polyester powder
coated finish. F1703F
BALLAST: A low power factor 120V 60Hz ballast.
F1704F
MOUNTING: The unit can be ordered for surface or flush
mounting, either vertically or horizontally for wall or ceiling.
A pendant model, normally drilled & tapped 1/2” N.P.T. (1” max.)
is also available. The pendant model cannot be furnished with Surface Flush Pendant
vertical lettering. Description Weight
Mount Mount Mount
OPTIONS:
Horizontal Lettering 5.5 lbs. (2.50 kg) F1703 F1703F F1705
Ballasts: Emergency ballasts and 220V 60Hz are also available.
Lens: Standard language is English. Please specify other language. Vertical Lettering 5.5 lbs. (2.50 kg) F1704 F1704F —

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-mail: customerservices@pauluhn.com
0160-04 4/27/06 5:28 PM Page 1

166-06

PAULUHN ELECTRIC MANUFACTURING, LLP


INSIDE DRIPPROOF CEILING FIXTURES
U.S.C.G. U.L. MARINE CSA ABS IP53
2-100W INCANDESCENT OR 2-13W, 18W OR 26W COMPACT FLUORESCENT

1136A-1 1139A-1 1140A 1141A 1142A


• Body made of die-formed marine-grade aluminum or brass sheet.
• Injection molded prismatic polycarbonate lens.
• For compact fluorescent lamps (120V), add the suffix “-13, -18 or -26” to the catalog number to specify the desired wattage.
• Electrostatic powder coated finish, black wrinkle for aluminum, dark bronze for brass.
• Shallow unit mounts to a 4” cast or steel box. The deep unit housing is used as a wiring compartment.
Brass Cat. No. Aluminum Cat. No.
Description Lamp Size
Incand. Fluor. Incand. Fluor.
Shallow type (1) 60W 1136B-1 — 1136A-1 —
Deep box type (1) 60W (1) 13W, 18W or 26W C. Fluor. 1137B-1 F1137B 1137A-1 F1137A
Shallow type (2) 60W 1138B-1 — 1138A-1 —
Deep box type (2) 60W (2) 13W, 18W or 26W C. Fluor. 1139B-1 F1139B 1139A-1 F1139A
Shallow type (2) 100W 1140B — 1140A —
Deep box type (2) 100W (2) 13W, 18W or 26W C. Fluor. 1141B F1141B 1141A F1141A
Recessed type (2) 100W (2) 13W, 18W or 26W C. Fluor. 1142B F1142B 1142A F1142A

WATERPROOF PIT OR INSIDE DRIPPROOF


CARGO HOLD FIXTURES CEILING FIXTURE
U.L. MARINE U.S.C.G. CSA ABS IP54

1449A
1440ANS*

CONSTRUCTION: Cast brass or copper free aluminum alloy.


GLOBE: Clear lens is standard. F1143
OUTLETS: Furnished blank unless otherwise specified. Max. 3/4” N.P.T.
fourway. CONSTRUCTION: Sheet aluminum or brass, low profile housing with a
3/4” knockout for use with stamped steel or cast 4” junction box
REFLECTOR: Spun aluminum with a white high gloss, polyester
mounting. The lens is attached to the housing with a center lockup thumb
powder coating.
nut. No tools are needed for maintenance.
GUARD: Heavy-duty casting, hinged to the unit.
FINISH: Polyester powder coated, black wrinkle finish for aluminum or
TERMINAL BLOCK: A four wire terminal block is standard. (CX3070) dark bronze for brass.
LENS: Furnished with a clear injection molded prismatic polycarbonate lens.
LAMP: The compact fluorescent units include two 13, 18 or 26W PL lamps.
Description Lamp Size Bronze Weight Bronze Cat.No. Alum. Cat No. OPTIONS: For a “vandal proof” unit, add the suffix “VP”.
North Sea Unit* 100W 14-1/2 lbs. (6.59 kg) 1440BNS* 1440ANS* Description Lamp Size Alum. Weight Alum.Cat.No.
Cargo Hold 200W 19 lbs. (8.63 kg) 1449B 1449A (2) 13W
Inside dripproof fixture 6 lbs. (2.72 kg) F1143A-13
Compact
*NOTE: This unit is furnished with a high impact glass lens and a special reinforcement (2) 18W
ring for severe environmental conditions. Inside dripproof fixture 6 lbs. (2.72 kg) F1143A-18
Compact
(2) 26W
Inside dripproof fixture 6 lbs. (2.72 kg) F1143A-26
Compact

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-Mail: customerservices@pauluhn.com
0161-04 4/26/06 8:56 PM Page 1

167-06

PAULUHN ELECTRIC MANUFACTURING, LLP


WATERTIGHT NON-METALLIC LIGHTING FIXTURES
INCANDESCENT OR COMPACT FLUORESCENT
For Hazardous Location Class I Div 2

700 701 702

CONSTRUCTION: These units are made from impact and LAMPHOLDER: Polycarbonate lampholders supplied with
corrosion resistant, reinforced polyester with a T3C and compact fluorescents. Incandescent and high pressure
T3 temperature rating. They are designed to handle harsh sodium lamps are supplied with porcelain lampholders.
marine environments. GUARD: Non metallic guard is standard. An optional
VOLTAGE: All fixtures are supplied to operate at 120VAC stainless steel wire guard is available.
60Hz as standard. Compact fluorescent units only can be OUTLETS: Junction boxes on the ceiling and wall mount
supplied to operate on 277VAC 60Hz. versions are supplied with four 3/4” N.P.T. knockouts. The
MOUNTINGS: Ceiling mount, pendant mount and wall pendant unit is mounted by one 3/4” N.P.T. outlet.
mount. REFLECTOR: A prismatic reflector is optional, but cannot
GLOBE: A clear glass globe is provided as standard. be used with a wire guard.
Optional colored globes, amber, blue, green and red. GASKET: A one piece silicone gasket which protects
Polycarbonate globe and tempered glass globes are also against water intrusion.
available. APPROVALS: Class I Div 2, Class II Div 2, Class III, USCG
accepted, CSA and ABS. Temperature rating T3C and T3.

Description Ceiling Pendant Wall Lamp Wattage Voltage/ Frequency Globe


Mount Mount Mount and Type standard

Incandescent 700 701 702 150W max 120VAC 60Hz Standard – Clear Globe
250V 50/60Hz (only) Amber
Blue
High Pressure S700 S701 S702 35W, 50W 120VAC 60Hz Green
Sodium Red
Tempered Glass
Compact F700 F701 F702 9W, 13W, 120VAC 60Hz Polycarbonate
Fluorescent 18W, 26W, 277V 60Hz (only) Stainless Steel Wire Guard
32W, and 35W Prismatic Reflector

BECK ELECTRIC
SUPPLY Wilmington, California
Phone: 310-834-1151
Fax: 310-834-1208
Richmond, California
Phone: 510-215-9499
Fax: 510-215-7889
Seattle, Washington
Phone: 206-763-2011
Fax: 206-767-9219
www.beckelectric.com E-mail: socalsales@beckelectric.com E-mail: casales@beckelectric.com E-mail: wasales@beckelectric.com
0162-04 4/26/06 8:58 PM Page 1

168-06

PAULUHN ELECTRIC MANUFACTURING, LLP


VAPOR & WATERPROOF
COMPACT FLUORESCENT LIGHTING FIXTURES
U.L. MARINE—U.S.C.G.
Wall, Flush, Bracket and Surface Ceiling Mounts
Dome, Shallow Dome and Angle Reflectors
13W – 26W Compact Fluorescent Lamps

F1729 F717AL F717BN


30° Angle Reflector Shallow Dome Reflector 30° Angle Reflector

F707 F707F F729 F717


Wall Mount Wall Flush Mount Bracket Mount Ceiling Mount

CONSTRUCTION: Heavy duty wall cast brass or copper free marine grade aluminum.
Specify material by adding the suffix “A” for aluminum or “B” for bronze after catalog number.
OUTLETS: Standard is undrilled. Available up to maximum of 1” N.P.T. fourway.
LAMPS: Compact fluorescent lamps are included. Specify wattage by adding suffix -13, -18 or -26 for 13W, 18W or 26W lamps.
OPTIONS: Terminal Block – Add suffix T for a 4 wire block (Cat. No. CX3070), add suffix T-6 for a 6 wire block (Cat. No. CX3076).
Globe – Clear glass globe is standard. For color globes add suffix RED, BLU, GRN or YEL.

Description Bronze Weight Bronze Catalog No. Alum. Catalog No.


Wall Mount 7 lbs. F707B F707A
Wall Flush Mount 8.25 lbs. F707BF F707AF
Bracket Mount 8.50 lbs. F729B F729A
Ceiling Mount 8.50 lbs. F717B F717A
30° Angle Reflector Wall Mount 11 lbs. F1729B F1729A
Shallow Dome Reflector Ceiling Mount 7 lbs. F1757B F1757A
30° Angle Reflector Ceiling Mount 7.75 lbs. F1758B F1758A

Florida Marine Products, Inc.


FLORIDA 2001 E. 5th Ave. Tampa, FL 33605
WHOLESALE Phone: 1-800-952-2283
Fixtures • Fittings • Ship Board Cable MARINE PRODUCTS Fax:
1-813-248-2283
1-813-247-7105
IN STOCK SAME DAY SHIPPING
INC. E-mail: fl-marine@ij.net
Web: www.fmpusa.com
0163-04 4/26/06 8:59 PM Page 1

169-06

PAULUHN ELECTRIC MANUFACTURING, LLP

FLUORESCENT WEATHER RESISTANT CEILING FIXTURE


Hazardous Location Class I Div 2, 17W – 60W, Surface Mount
U.S.C.G. Accepted U.L. 924, U.L. 844, U.L. 1598A

FPS220

Cross Section

No. of Lamp Available in one, two and three lamp units (35W & 60W fixtures available in
Description Lamps Type Weight FPS one and two only). The fixture is watertight.
17W Rapid Start 1 8-1/4 lbs. FPS117D2
265 MA 2 F17T8 8-1/2 lbs. FPS217D2
24” Lamp 3 13 lbs. FPS317D2 HOUSING: Glass reinforced polyester with a natural grey finish.
20W 1 9-3/4 lbs. FPS120D2 LATCHES: Stainless steel.
Trigger Start 2 F20T12 10 lbs. FPS220D2
24” Lamp 3 13-1/2 lbs. FPS320D2
REFLECTOR: White powder coated aluminum.
32W Rapid Start 1 12-3/4 lbs. FPS132D2 OUTLETS: All units are supplied with two 3⁄4” NPT outlets, one plugged,
265 MA 2 F32T8 13-1/4 lbs. FPS232D2 providing a through-feed service where required.
48” Lamp 3 14-1/2 lbs. FPS332D2
35W High Output 1 13-3/4 lbs. FPS135D2
GASKETS: One continuous piece extruded neoprene gasket provides an
800 MA 2 F24T12 14 lbs. FPS235D2 effective seal between the lens and housing.
24” Lamp 3 /HO N/A N/A MOUNTING: Through 4 13/32" center point mounting holes provided on the
40W Rapid Start 1 14-1/4 lbs. FPS140D2 stainless steel mounting legs.
430 MA 2 F40T12 14-1/2 lbs. FPS240D2
48” Lamp 3 18-1/2 lbs. FPS340D2 LAMPHOLDER: Spring loaded lampholders provide a positive contact and
60W High Output 1 18-1/4 lbs. FPS160D2 maximum resistance to shock and vibration.
800 MA 2 F48T12 18-1/2 lbs. FPS260D2
48” Lamp 3 /HO N/A FPS360D2
BALLAST: An HPF120V 60Hz ballast is supplied as standard. 17W, 20W,
40W Single Ended 2 F40W/ 9-3/4 lbs. FPSC240D2 32W, 40W and 55W fixtures are rated for starting in temperatures down to 0°F
Compact 2G11 (-18°C) and 35W and 60W fixtures in temperatures down to -20°F (-29°C).
Fluorescent 4 18-1/2 lbs. FPSC440D2 LAMP TYPE: T8 and T12 fluorescent lamps as standard dependant on wattage.
55W Single Ended 2 F58W/ 9.7 lbs. FPSC255D2
Compact Fluorescent 4 2G11 18.5 lbs. FPSC455D2
All fixtures other than compact fluorescent types are supplied without lamps.
Compact fluorescent versions are available in two lamp and four lamp 40W
fixtures.
LENS: High impact matte acrylic diffuser. Optional clear polycarbonate also
available.
OPTIONS: Phenolic Terminal Block, Access Plate, Clear Polycarbonate Drop
Lens, Emergency Ballast, 220V 50Hz, 220V 60Hz and 277V 60Hz Ballasts.

Dimensions A B C
FPS 120, FPS 220, FPS 320 29 7-9/16 4-3/4
FPS 140, FPS 240, FPS 340 53 7-9/16 4-3/4

BECK ELECTRIC
SUPPLY Wilmington, California
Phone: 310-834-1151
Fax: 310-834-1208
Richmond, California
Phone: 510-215-9499
Fax: 510-215-7889
Seattle, Washington
Phone: 206-763-2011
Fax: 206-767-9219
www.beckelectric.com E-mail: socalsales@beckelectric.com E-mail: casales@beckelectric.com E-mail: wasales@beckelectric.com
0164-03 4/26/06 9:00 PM Page 1

170-06

PAULUHN ELECTRIC MANUFACTURING, LLP


FLUORESCENT WATERTIGHT OVERHEAD LIGHTING
Available in one, two and three lamp units (35W & 60W fixtures available in one and two only). Compact fluorescent
fixtures available in two and four lamp 40W versions. The fixture is watertight.

FPS - Fiber Glass FAS - Aluminum Housing FSS - Stainless Steel


HOUSING: Glass reinforced HOUSING: Aluminum with a HOUSING: Stainless steel with
polyester with a natural grey finish. polyester powder coated finish. a natural finish.

Description No. of Lamp FPS FAS FSS


Lamps Type
17W Rapid Start 1 FPS117 FAS117 FSS117
265 MA 2 F17T8 FPS217 FAS217 FSS217
24” Lamp 3 FPS317 FAS317 FSS317
20W 1 FPS120 FAS120 FSS120
Trigger Start 2 F20T12 FPS220 FAS220 FSS220
24” Lamp 3 FPS320 FAS320 FSS320
32W Rapid Start 1 FPS132 FAS132 FSS132
265 MA 2 F32T8 FPS232 FAS232 FSS232
48” Lamp 3 FPS332 FAS332 FSS332
35W High Output 1 FPS135 FAS135 FSS135
800 MA 2 F24T12/HO FPS235 FAS235 FSS235
24” Lamp 3 N/A N/A N/A
40W Rapid Start 1 FPS140 FAS140 FSS140
430 MA 2 F40T12 FPS240 FAS240 FSS240
48” Lamp 3 FPS340 FAS340 FSS340
60W High Output 1 FPS160 FAS160 FSS160
800 MA 2 F48T12/HO FPS260 FAS260 FSS260
48” Lamp 3 N/A N/A N/A
40W Single Ended 2 FPSC240 FASC240 FSSC240
Compact F40W/2G11
Fluorescent 4 FPSC440 FASC440 FSSC440
SSW Single Ended 2 FPSC255 FASC255 FSSC255
F55W/2G11
Compact Fluorescent 4 FPSC455 FASC255 FSSC455

LATCHES: Over the center stainless steel cam latches. LAMP TYPE: All fixtures other than compact fluorescent
REFLECTOR: White powder coated aluminum. types are supplied without lamps. Compact fluorescent
OUTLETS: All units are supplied with two 3⁄4 “ NPT outlets, versions are available in two lamp and four lamp 40W
one plugged, providing a through-feed service where fixtures.
required. LENS: High impact matte acrylic lens. Optional clear
GASKETS: One continuous piece extruded neoprene gasket polycarbonate also available.
provides an effective seal between the lens and housing. OPTIONS: Phenolic Terminal Block, Access Plate, Clear
LAMPHOLDER: Spring loaded lampholders provide a Polycarbonate Drop Lens, Emergency Ballast, 220V
positive contact and maximum resistance to shock and 50Hz, 220V 60Hz and 277V 60Hz Ballasts, Water Tight
vibration. at zero degrees.
BALLAST: An HPF120V 60Hz ballast is supplied as standard.

www.manning-electric.com
Stocking Distributor for
Pauluhn Electric Mfg., LLP

154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0165-04 4/26/06 9:00 PM Page 1

171-06

PAULUHN ELECTRIC MANUFACTURING, LLP


FLUORESCENT BERTH/ FLUORESCENT CEILING FIXTURES
MIRROR LIGHT Surface or Recessed Mount
CSA ABS IP44 U.L. 1598A Marine, U.L. 1571 Fluorescent
U.S.C.G. Accepted—20 Watt – 40 Watt
FN215
FR220
Recessed Mount

• Corrosion resistant housing in heavy duty extruded copper free


marine grade aluminum with an oven polyester powder coated
white high gloss protective finish.
• The diffuser is clear prismatic, high impact acrylic.
• The reflector is aluminum with a high gloss white
polyester powder coat. CONSTRUCTION: Aluminum housing with a high gloss polyester
• The ballast is a high power factor 120V 60 Hz. powder coat protection. The diffuser frame is of extruded
• The unit comes with a single pole toggle. aluminum with a polyester powder coating anodized type finish.
A double pole switch is available as an option. An access plate is provided with a terminal block and an extra
• The unit accommodates 1 or 2 fluorescent lamps, knock out. The fixtures are prewired at the factory.
F15T8, FT10 or T12. DIFFUSER: A standard flat prismatic DR acrylic lens is held to the
• The unit comes with a 125V 3 wire 2 pole “U” ground frame by spring clips. The lens frame assembly is fastened to the
convenience outlet. housing with a sliding hinge arrangement which allows the lens
Description Lamp Size Aluminum Catalog No. frame assembly to slide down and swing away. Captive knurled
Berth & Mirror Light (1)-15W T8 or T10 FN115 thumb screws hold the frame in position.
Berth & Mirror Light (2)-15W T8 or T10 FN215
REFLECTOR: Aluminum with a white, high gloss polyester
Berth & Mirror Light (2)-17W T8 FN217
powder coated finish.
Berth & Mirror Light (2)-20W T12 FN220
Hallway/Under Counter (1)-32W T8 FN132 TERMINAL BLOCK: A phenolic terminal block is supplied
Hallway/Under Counter (1)-40W T12 FN140 on the access plate for convenience and ease of wiring.
BALLAST: Standard ballast supplied is H.P.F. 120V 60 Hz.
FLUORESCENT BERTH/MIRROR LIGHT LAMPHOLDER: The spring loaded lampholders provide positive
1 – 8W Surface Mount ABS IP40 contact and maximum resistance to shock and vibration.
OPTIONS:
Diffuser: Also available: Dropdish prismatic suffix “H”; and flat
prismatic suffix “J”.
Ballast: Others are available as options, including L.P.F., low
F1062 voltages, dimmer, low temperature, electronic, T8, compact
fluorescent and emergency ballasts.

Lamp Aluminum Drip


Description
Size Weight Proof

1-20W 11 lbs. (5.00 kg) FR120J


CONSTRUCTION: Corrosion resistant housing in copper free
marine grade aluminum with a polyester powder coated anodized Recessed Mount 2-20W 12lbs. (5.45 kg) FR220J
type finish. BALLAST: A high power factor 120V, 60 Hz is Ceiling Fixture 3-20W 16lbs. (7.27 kg) FR320J
provided. SWITCH: A push type momentary contact switch is
4-20W 26 lbs. (11.82 kg) FR420J
provided as standard. LAMP TYPE: One fluorescent 8W F8T5.
CONVENIENCE OUTLET: A 125V 3 wire 2 pole “U” ground is 1-40W 16 lbs. (7.27 kg) FR140J
standard. SHADE: Adjustable for light control. OPTIONS: 2-40W 17 lbs. (7.73 kg) FR240J
Ballast: Other voltages and 50 Hz are available as options. Recessed Mount
Ceiling Fixture 3-40W 20 lbs. (9.09 kg) FR340J
Convenience Outlet: The fixture, less the convenience outlet, is
available as an option. Add the suffix“LCO”. 4-40W 29 lbs. (13.18 kg) FR440J

Description Lamp Size Alum. Weight Alum. Cat. No.


Inside Drip Proof Fixture (1) F8T5 6 lbs. (2.72 kg) F1062

L.F. GAUBERT & CO. Over 50 Years in Business


700 S. Broad St. - P. O. Box 50500 - New Orleans, LA 70150
Tel: 504-822-7272 • Fax: 504-821-9309 • Toll Free: 800-831-7534 MARINE, ELECTRICAL
AND
E-mail: sales@gaubertcable.com
www.gaubertcable.com INDUSTRIAL SUPPLIES
0166-04 4/26/06 9:05 PM Page 1

172-06

PAULUHN ELECTRIC MANUFACTURING, LLP

FLUORESCENT CORNICE LIGHTS FLUORESCENT LOW PROFILE


20, 35, 40 & 60 Watt SURFACE MOUNT CEILING FIXTURE
U.L. Marine-U.S.C.G. 20 – 40 Watt
120VAC or 220VAC U.L. 1570 U.S.C.G., ABS
FCM220

CONSTRUCTION: A corrosion resistant aluminum housing with a FLC220


polyester powder coated anodized type finish. DIFFUSER: A high-impact
DR acrylic white translucent is standard. REFLECTOR: The aluminum
reflector surface is finished with a white, high gloss polyester powder CONSTRUCTION: The housing is a copper-free aluminum with a high
coating. TERMINAL BLOCK: A 2 pole, double row terminal block is gloss white polyester powder coating for additional protection and
supplied with the fixture for convenience and ease of wiring. BALLAST: reflectability. The gasketing is closed cell neoprene covering the entire end
High power factor 120V, 60 Hz is standard. OPTIONS: Ballast: Other and sides, sealed against the diffuser. DIFFUSER: A wrap-around high
ballasts are available as options, including L.P.F., low temperature, impact extruded acrylic Iens is designed to give an even, uniform light
dimmer, 50 Hz, 220V 60Hz, alternate voltages, electronic, and emergency distribution. BALLAST: Standard ballast supplied is H.P.F. 120V, 60 Hz.
ballasts. Convenience Outlet: For a convenience outlet add suffix “CO”, LAMPHOLDER: Twist-and-lock lampholders provide resistance to shock
and/or for a switch, add suffix “SW”. and vibration. MOUNTING: Two mounting straps of heavy-duty copper-
free aluminum are attached across the back of the fixture with two mounting
Lamp Size Weight Drip Proof holes per strap. OPTIONS: Ballast: Others are available as options,
1-17W 10 lbs. (4.55 kg) FCM117 including
2-17W 11 lbs. (5.00 kg) FCM217 L.P.F., low voltages, low temperature, 50 Hz, 220V 60Hz, dimmer,
1-20W 10 lbs. (4.55 kg) FCM120 electronic, T8 and emergency ballasts. Diffuser: A frosted white lens is
2-20W 11 lbs. (5.00 kg) FCM220 optional, add suffix “E”.
1-32W 16 lbs. (7.27 kg) FCM132
2-32W 17 Ibs. (7.73 kg) FCM232 Lamp Size Alum. Weight Alum. Cat. No.
1-40W 16 lbs. (7.27 kg) FCM140 2-20W 7 Ibs. (3.18 kg) FLC220
2-40W 17 lbs. (7.73 kg) FCM240 2-40W 11 lbs. (5.00 kg) FLC240

RECESSED CEILING FIXTURES


20, 35, 40 & 60 Watt
U.L. Marine-U.S.C.G.
Lay-In Type For “T” Frame Ceiling

Description Lamp Size Weight Fixture


2 x 2 Ceiling 2 x 17W 14 lbs. FT217 CONSTRUCTION: Aluminum housing protected with a white high gloss
Fixture 3 x 17W 17 lbs. FT317 polyester powder coating. An access plate is provided with a phenolic
4 x 17W 17 lbs. FT417 terminal block and an extra knock out. The fixtures are prewired at the factory.
2 x 2 Ceiling 2 x 20W 14 lbs. FT220 DIFFUSER: Prismatic acrylic flat lens for controlled diffused light. Captive
Fixture 3 x 20W 17 lbs. FT320 knurled thumb screws hold the frame in position.
4 x 20W 17 lbs. FT420
REFLECTOR: Aluminum with a high gloss polyester powder coated finish.
2 x 4 Ceiling 2 x 32W 14 lbs. FT232
Fixture 3 x 32W 17 lbs. FT332 TERMINAL BLOCK: A phenolic terminal block is supplied on the access plate
4 x 32W 17 lbs. FT432 for convenience and ease of wiring.
2 x 2 Ceiling 2 x 35W 23 lbs. FT235 BALLAST: The standard ballast supplied is H.P.F., 120V 60 Hz.
Fixture 3 x 35W 27 lbs. FT335 LAMPHOLDER: Twist locking for BiPin and spring loaded locks for High
4 x 35W 27 lbs. FT435 Output.
2 x 4 Ceiling 2 x 40W 14 lbs. FT240 MOUNTING: The “lay-in” type unit is supported by the ceilings “T” bars.
Fixture 3 x 40W 17 lbs. FT340
4 x 40W 17 lbs. FT440 OPTIONS:
2 x 4 Ceiling 2 x 60W 23 lbs. FT260 Ballast: Others are available as options, including 50 Hz, dimmer
Fixture 3 x 60W 27 lbs. FT360 alternate voltages, L.P.F., low voltages, low temperature, electronic, T8,
4 x 60W 27 lbs. FT460 compact fluorescent and emergency ballasts.

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-Mail: customerservices@pauluhn.com
0167-04 4/26/06 9:06 PM Page 1

173-06

PAULUHN ELECTRIC MANUFACTURING, LLP


FLUORESCENT BERTH FLUORESCENT DESK LAMPS
& MIRROR LIGHTS U.L. Marine-U.S.C.G. 2 – 15W Lamp
Surface Mount, U.S.C.G. Accepted,
U.L. Listed 1570 Fluorescent,
120VAC or 220VAC
1 or 2 – 15W Lamp FE215CV/5 FE215CV/6
Double Stationary Arm Double Adjustable Arm

CONSTRUCTION: Corrosion resistant aluminum with a powder


1 Lamp—F115 2 Lamp—F215 coated anodized type finish.
CONSTRUCTION: Marine grade aluminum, corrosion resistant REFLECTOR: Aluminum with a white high gloss polyester
housing with a polyester powder coated finish. powder coated finish.
DIFFUSER: Clear prismatic lens, high impact or acrylic. LAMP TYPE: Two 15W fluorescent lamps, not included.
REFLECTOR: Aluminum with a white high gloss polyester powder MOUNTING: The base is surface mounted by threaded studs.
coated finish. SWITCH/STARTER: A push type momentary contact switch
BALLAST: High power factor, rapid start supplied standard. is mounted on the reflector shade. A double pole toggle switch is
Can be supplied with low power factor on request. optional.
SWITCH: A push type momentary contact switch is provided as CORD & PLUG: A three conductor, SJT cord and molded plug.
standard. Double pole toggle type switch is optional. LENS: A clear high impact acrylic lens is supplied.
LAMPS: One or two 15W lamp. Lamps not included. OPTIONS:
CONVENIENCE OUTLET: A 125V 3 wire - 2 pole “U” ground Diffuser: A diffuser is not provided on the standard unit. For a flat
outlet is provided as standard. clear high-impact polycarbonate lens, add suffix “CV”. Add suffix
“RV” for a red lens or suffix “YV” for an amber lens.
MOUNTING: 2-1/4” mounting holes in back of fixture. Dimensions: Base—8-3/8” wide; Overall—13-1/4” high x
DIMENSIONS: 21-1/4” long, 5-1/2” high, 5-1/2” wide. 18-1/2” wide.
VOLTAGE: Specify 120VAC or 220VAC.

FLUORESCENT BERTH
& MIRROR LIGHTS
Flush Or Surface Mount, Vertical or Horizontal FLUORESCENT BERTH
U.S.C.G. Accepted, U.L. Listed 1570 Fluorescent & MIRROR LIGHT
120VAC or 220VAC Surface Mount, U.S.C.G. Accepted
2 – 8W Lamp U.L. Listed 1570 Fluorescent,
120VAC or 220VAC
1-15W Lamp
F1061
1 Lamp—FBN18 1 Lamp—FMN18
2 Lamp—FBN28 2 Lamp—FMN28
CONSTRUCTION: Corrosion resistant aluminum housing. CONSTRUCTION: Corrosion resistant aluminum with a powder
OUTLETS: All units supplied with one 1/2” and 3/4” KO. coated anodized type finish.
REFLECTOR: Aluminum with a white high gloss polyester powder SHADE: An adjustable shade is provided.
coated finish. SWITCH/STARTER: A double pole rocker is provided.
LENS: A high impact fluted acrylic lens provided. CONVENIENCE OUTLET: A 125V 2 wire 3 pole “U” ground
BALLAST: Low power factor, pre-heat supplied standard. supplied standard. Can be furnished less outlet on request.
SWITCH/STARTER: Push type momentary contact. VOLTAGE: Specify 120VAC or 220VAC.
LAMPS: Two 8W fluorescent lamps. Lamps are included. OVERALL DIMENSIONS: 19-1/4” long x 3” wide x 5-5/8” deep.
DIMENSIONS: 14-3/8” long, 4-1/4” high, 3-1/2” wide.
VOLTAGE: 120VAC 60 Hz standard.

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-mail: customerservices@pauluhn.com
0168-04 4/26/06 9:07 PM Page 1

174-06

PAULUHN ELECTRIC MANUFACTURING, LLP


FLUORESCENT DESK & CHART LAMPS
Surface or Bulkhead Mount, Two Lamps U.L. Marine-U.S.C.G.—120VAC or 220VAC

FE215/1 FE215/2 FE215/3 FE215/4


Bulkhead Mount Bulkhead Mount Bulkhead Mount Bulkhead Mount
Stationary Arm Single Adjustable Arm No Arm, No Neck Double Adjustable Arm
CONSTRUCTION: Corrosion resistant housing in aluminum sheet metal. Description Lamp Size Alum. Weight Alum. Cat. No.
LENS: A clear high impact acrylic lens is supplied with 15W units. 1-15W FE28/1
Stationary Arm 12 Ibs. (5.5 kg)
REFLECTOR: Aluminum with a white, high gloss polyester 2-15W FE215CV/1
powder coating. 1-15W FE28/2
Single Adjustable Arm 12 Ibs. (5.5 kg)
BALLAST: High power factor 120V 60 Hz is standard. 2-15W FE215CV/2
1-15W FE28/3
SWITCH: A double pole toggle on the junction box is standard. No Arm, No Neck 12 Ibs. (5.5 kg)
2-15W FE215CV/3
LAMP TYPE: Two 8W or 15W flourescent lamps used. Not included. 1-15W FE28/4
Double Adjustable Arm 12 Ibs. (5.5 kg)
2-15W FE215CV/4
OPTIONS:
Diffuser: For a flat clear high-impact polycarbonate lens, add suffix “CV”. Add suffix “RV” for a red lens or suffix “YV” for an amber lens.
Ballast: Optional 220V 60 Hz available.
Convenience Outlet: A 125W 3W 2P “U” ground available, add suffix “CO” to catalog number.
Arm Types: Stationary arm (6-3/8”) and adjustable arms.

INSIDE TYPE RECESSED


CEILING FIXTURE EXPLOSION PROOF GENERAL ALARM
U.L. 1598A, U.S.C.G., ABS CONTACT MAKER
U.S.C.G., ABS Type Approved,
Hazardous Locations, Class I, Division I,
Groups C & D
F1167
U.L. 98, U.L. 698
• Corrosion resistant housing in spun cold-rolled steel.
• The diffuser is an injected molded clear prismatic
polycarbonate drop lens.
• The reflector is steel with a high gloss white polyester
powder coat.
• The ballast is a high factor 120V 60 Hz; 277V 60 Hz optional.
• The unit comes with 2- 13W, 18W or 26W compact
EP833/834
fluorescent lamps.
CONSTRUCTION: Corrosion resistant enclosures in heavy wall
brass. Supplied standard with one 1/2” NPT outlet.
OPERATION: Locking on position prevents accidental activation.
Spring loaded knob retains the lever in the ON position until the
knob is pulled and a spring returns the lever to the OFF position.
Description Lamp Size Weight Steel Cat. No. Ratings Dimensions Cat. No. Brass Weight
(2) 13W 15A 125VAC 4-15/16 “ x 5-5/8” EP833 10 lbs. (4.5 kg)
Inside Dripproof Fixture 7 Ibs. (3.18 kg) F1167-13
compact 10A 24VDC
(2) 18W 2A 125VDC
Inside Dripproof Fixture 7 Ibs. (3.18 kg) F1167-18
compact 20A 120VAC
(2) 26W 15A 240VAC
Inside Dripproof Fixture 7 Ibs. (3.18 kg) F1167-26 4-15/16” x 5-5/8” EP834 10 lbs. (4.5 kg)
compact 5A 125VAC

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-Mail: customerservices@pauluhn.com
0169-04 4/26/06 9:08 PM Page 1

175-06

PAULUHN ELECTRIC MANUFACTURING, LLP


FLUORESCENT RECESSED FIXTURES FLUORESCENT RECESSED
FOR MODULAR TYPE CEILINGS BERTH & MIRROR FIXTURES
“DAMPA” CEILINGS (2) 8W – 120 or 220VAC – U.L. Marine – U.S.C.G.
20W & 40W – U.L. Marine – U.S.C.G.
FB28F

FB28FADJ
w/ Adjustable Shade
FDA220PER

CONSTRUCTION: Corrosion resistant polyester powder coated steel CONSTRUCTION: Marine grade copper free aluminum, non-corrosive
housings. Standard is white finish, optional "color match" to ceiling can be anodized type, polyester powder coated frame with a white, high gloss
specified. polyester powder coated reflector.
DIFFUSER: Acrylic clear prismatic is standard, optional "color match" to
SWITCH / STARTER: Push type momentary contact switch is standard.
frame can be specified.
A double pole toggle switch is optional.
LAMPS: Choice of two lamps in 17W, 20W, 32W or 40W.
TERMINAL BLOCK: A phenolic terminal block is supplied with the fixture DIFFUSER: Clear fluted lens for increased light distribution.
for convenience and ease of wiring. LAMPS: 1 or 2 fluorescent 8W F8T5. Lamp is included with this fixture.
BALLAST: The standard ballast supplied is HPF, 120V AC , 60 Hz. An ADJUSTABLE SHADE: Add suffix “ADJ“ to Catalog No.
optional Emergency Ballast "EM" is available.
BALLAST: Low power factor 120V 60 Hz is standard. Other voltages and
LAMPHOLDER: Locking lampholders provide maximum resistance to 50 Hz are available on application.
shock and vibration.
MOUNTING: The FDA models are designed to integrate with modular CONVENIENCE OUTLET: A 125V 3 wire – 2 pole “U” ground is standard.
continuous ceiling systems. The suffix "PAR" is for fixtures that mount For a fixture without the receptacle add suffix “LCO”.
parallel to the ceiling frames, the suffix "PER" is for fixtures that mount Description Lamp Size Alum. Weight Alum. Cat. No.
perpendicular to the ceiling frames. (1) F8T5 / CW FB18F
Fluorescent Recessed 3-1/2 lbs. (1.59 kg)
(2) F8T5 / CW FB28F
Description Lamp Size Weight Catalog No.
2 x 17W 14 lbs. FDA217PAR
Parallel Type
2 x 20W 15 Ibs. FDA220PAR
2 x 32W 23 lbs. FDA232PAR EXPLOSION PROOF SCREW COVER
2 x 40W
2 x 17W
23 lbs.
15 lbs.
FDA240PAR
FDA217PER JUNCTION BOX
Perpendicular Type
2 x 20W 16 lbs. FDA220PER U.L. 498, NEMA 4X & 7 U.S.C.G.
2 x 32W 25 lbs. FDA232PER
2 x 40W 25 lbs. FDA240PER Class I Groups C & D – Class II Groups E, F & G

MARINE GRADE CABLE GLANDS 5-5/32

For Portable Cords & MV, SE, PLTC, TC & UF Types


1/2”, 3/4” & 1” N.P.T. 3-1/2
2-5/8

INX1506BCG
5-11/16
CONSTRUCTION: Marine grade brass or copper free
aluminum bodies and gland nuts, Supplied complete
with neoprene grommets to make hole sizes shown under
grip range. The gland nut is hex shaped for easy tightening.
APPLICATION: ACG and BCG series cable glands are for use with
portable cords and types MV (unarmored), SE, PLTC (round), TC and EPJ505A
UF cables. Designed to grip the cable and create a watertight seal around
cable entrance into a junction box or a bulkhead. Ø5/16
4 MTG HOLES
ON 5” B.C.
Grommet Dia. Grip Brass Aluminum
Description N.P.T.
Cat. No. Bore Range Cat. No. Cat. No.
GKT7018 .312 – .375 CONSTRUCTION: Heavy wall marine grade cast brass or aluminum box
Cable Gland 1/2” GKT7019 .562 .375 – .437 INX1502BCG INX1502ACG and cover. The EPJ505 is designed for locations where flammable gases or
GKT7020 .437 – .500 dusts are usually present.
GKT7021 .437 – .562
OUTLETS: This junction box is supplied with one 1/2” N.P.T. opening.
Cable Gland 3/4" GKT7022 .750 .562 – .687 INX1506BCG INX1506ACG
It can be supplied with one to four openings for pipe sizes up to 1” N.P.T.
GKT7023 .687 – .750
GKT7024 .750 – .875 Description Bronze Weight Bronze Cat. No. Alum. Cat. No.
Cable Gland 1” 1.000 INX1508BCG INX1508ACG
GKT7025 .812 – .937 Screw Cover Junction Box 5 lbs. (2.27 kg) EPJ505B EPJ505A

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-mail: customerservices@pauluhn.com
0170-04 4/27/06 5:31 PM Page 1

176-06

PAULUHN ELECTRIC MANUFACTURING, LLP


CIRCUIT BREAKER RECEPTACLE WATERPROOF INTERLOCKING
INTERLOCK COMBINATION SWITCH & RECEPTACLE
15 TO 50 AMPS 480VAC, 250VDC 10 AMP 250V to 30 AMP 250V
Circuit Breaker – 2 & 3 Pole CONSTRUCTION: Natural sand
Thermal Magnetic Receptacles casting, wheelabrated. Marine
2 Wire 3 Pole & brass or copper free aluminum.
3 Wire 4 Pole OUTLETS: Supplied blank standard.
Can be supplied up to one 1-1/2” I.P.S.
MOUNTING: Furnished with four 843B
external mounting legs.
2460A
Box Brass Catalog No.
Description Rating
HOUSING: Cast copper free aluminum alloy. Dimensions Wgt. Lbs. Brass Alum.
2 Pole 3 Wire 839B 839A
Cast brass available on application. Provided with locking provision. 20 AMP 6-1/2” x 4” x 3-1/2” 7-1/2
3 Pole 4 Wire 840B 840A
MOUNTING: Furnished with external mounting legs standard. 2 Pole 3 Wire 841B 841A
20 AMP 6-1/2” x 4” x 3-1/2” 7-1/2
Can be furnished with mounting holes in box. 3 Pole 4 Wire 842B 842A
OUTLETS: Furnished blank standard. Can be supplied with 1-1/2“ 2 Pole 3 Wire 843B 843A
30 AMP 7-1/4“ x 4-1/4“ x 4-1/2” 9
3 Pole 4 Wire 844B 844A
NPT outlets. This unit is provided with an integral locking system
between receptacle and circuit breaker. Once the plug is inserted
and twisted into position the switch is then closed. The plug
cannot be removed from its connection until the breaker is made WELDING RECEPTACLE 6000B
safe by disengaging. Also the plug cannot be inserted while the Single Pole, 300 AMP 600VAC
switch is closed. U.S.C.G. Accepted
PLUG: 2 pole 3 wire = Catalog Number 430P
3 pole 4 wire = Catalog Number 431P
Provided with screw type collar for watertight contact.
OVERALL DIMENSIONS: 13-1/2” high x 8-3/4” wide x 5-3/4” deep

Receptacles
Circuit Breakers
Catalog No. Max. I.P.S. SINGLE RECEPTACLE NO. 6000B: Single pole, 300 Amp positive-
Poles & Volts Trip Amps lock screw cap. Supplied less outlets standard. Can be supplied up
15 2460A 1-1/4” to 1” I.P.S. Overall Dimensions: 6-1/2“ x 4-1/8” x 5-1/4”.
50 AMPS 2 Pole 20 2462A 1-1/4”
2 Pole 480VAC 30 2464A 1-1/4” DOUBLE RECEPTACLE NO. 6583B: Two single poles, 300 amp
3 Wire *250VDC 30 2466A 1-1/4" (each), positive-lock screw cap. Supplied less outlets standard.
50 2468A 1-1/4” Can be supplied up to 1” I.P.S.
50 AMPS 15 2470A 1-1/4” Overall Dimensions: 12” x 10” x 6-3/4”.
3 Pole 20 2472A 1-1/4”
3 Pole PLUG MALE NO. 6000 PB: Maximum cable diameter 3/4”.
4 Wire 30 2474A 1-1/4”
4th wire 480VAC
30 2476A 1-1/4” CONSTRUCTION: Both receptacles and plugs composed of
for ground 50 2478 1-1/4” copper free cast aluminum. Cast brass available on request.
*When required for D.C. add suffix “D.C.” to catalog number. Plug and receptacle interiors composed of nylon.

WATERPROOF RECEPTACLES AND PLUGS


480 and 600V AC or DC, Polarized, U.S.C.G. Accepted
CONSTRUCTION: Cast aluminum box with cast aluminum cover. OUTLETS: Supplied blank but can be supplied with up to four 1”
Aluminum plug housing with molded composition interiors NPT outlets. 30 amp 3/4”; 60 – 100 amp 1-1/2”.
and heavy machined brass contacts. ON APPLICATION: Three pole four wire units and plugs.
Also 600V AC, 250V AC or DC.

ANGLE TYPE STRAIGHT TYPE


Description Receptacle Plug Receptacle Plug
Cat. No. Cat. No. Cat. No. Cat. No.
30 AMP 2P3W 6009A 6009AP 6007A 6009AP
60 AMP 2P3W 6010A 6010AP 6012A 6010AP
30 AMP 3P4W 6006A 6006AP 6008A 6006AP
6009AP 6009 60 AMP 3P4W 6014A 6014AP 6016A 6014AP

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-Mail: customerservices@pauluhn.com
0171-04 4/27/06 5:32 PM Page 1

177-06

PAULUHN ELECTRIC MANUFACTURING, LLP


WATERPROOF SWITCHES WATERTIGHT EMERGENCY
U.S.C.G. ACCEPTED DISCONNECT BREAKER
U.L. 489 – U.S.C.G. NEMA 4X
CONSTRUCTION: The catalog and part
numbers shown are cast brass. An external
manual control handle has provisions
for padlocking the unit in the off position.
BREAKERS: The breaker interior assures
2100B quick make-and-break for instant
interruption. The two pole breakers
are rated for 480VAC or 250VDC.
The three pole breakers are rated 480VAC
CONSTRUCTION: Cast brass or copper free aluminum.
2482B-125 only. The 15 Amp breakers are supplied
Supplied blank standard. Can be supplied up to four 1” N.P.T.
in catalog numbers shown. To order other amperage breakers
outlets.
substitute the appropriate suffix for “15” in the catalog number.
OVERALL DIMENSIONS: 3-3/4” high x 4-5/8” long x 3-1/4” wide Suffixes are as follows: 20 Amp “20”, 30 Amp “30”, 40 Amp “40”,
10 Amp 250V 20 Amp 250V 30 Amp 250V 50 Amp “50”, 60 Amp “60” or 100 Amp “100”. (e.g. 2482B-220
Description Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. for 2 Pole, 20 Amp and 2482B-320 for 3 Pole, 20 Amp). The
Brass Alum. Brass Alum. Brass Alum. enclosure only, without the breaker interior, is supplied when
Single Pole 2100B* 2100A 2111B 2111A 2121B 2121A the entire suffix is deleted. (e.g. 2482B).
Double Pole 2102B 2102A 2112B 2112A 2122B 2122A OUTLETS: The units are furnished blank, however, they can be
Three Way 2103B 2103A 2113B 2113A 2123B 2123A supplied with one hole in each end up to 1-1/2” N.P.T. or with
Four Way 2104B 2104A NA NA NA NA two holes in each end up to 1-1/4” N.P.T. Drilling and tapping
*Rated at 20 Amp or 30 Amp 250V AC max. or 15 Amp 277V AC max.. can be done on application.
Appendix A Bronze 3 Wire Bronze
Description
Dwg. Code Weight Cat. No.
2P Breaker BS 30.5 lbs. (13.82 kg) 2482B-215
3P Breaker BS 30.5 lbs. (13.82 kg) 2482B-315

RECEPTACLE AND SWITCHES SWITCH AND PILOT LIGHT


15 AMP 125V 15 AMP 125V
U.S.C.G. Accepted U.S.C.G. Accepted

2715B 2716B

CONSTRUCTION: Enclosure constructed of copper free cast CONSTRUCTION: Enclosure constructed of copper free cast
aluminum, cast brass, or non-metallic. aluminum, cast brass, or non-metallic.
OUTLETS: Supplied blank standard. Can be supplied up OUTLETS: Supplied blank standard. Can be supplied up to two
to two 3/4” N.P.T. outlets. 3/4" N.P.T. outlets.
OVERALL DIMENSIONS: 4-1/2” high x 2” deep x 2-3/4” wide. OVERALL DIMENSIONS: 4-1/2” high x 2” deep x 2-3/4” wide.
Description 2W3P Receptacle Cat. No. Brass Cat. No. Aluminum Description Cat. No. Brass Cat. No. Aluminum
With Single Pole Switch 2715B 2715A 15 Amp Single Pole Switch
2716B 2716A
Two Switches 2717B 2717A And 1/4W 125V pilot light

PAULUHN ELECTRIC MANUFACTURING, LLP


1616 N. Main, Pearland, Texas 77581 • 281-485-4311 • Fax 281-485-4398
Web: www.pauluhn.com • E-mail: customerservices@pauluhn.com
0174-03 4/26/06 9:10 PM Page 1

178-06

L.C. DOANE COMPANY


M450 Series Surface Mount Fluorescent Light Fixture
Applications: Bunks, bulkheads, passageways, mirrors, chart
light
HOUSING: Extruded aluminum housing with die-formed ends.
Available with a single receptacle and lighted switch.
UL 1598A Marine 1 or 2 lamp combinations REFLECTOR: A specular aluminum one piece electrical
How To Order Example: M450-17 component mounting tray, locking Bi-Pin lampholders.
LENS: One piece impact resistant white linear prismatic acrylic.
FINISH: White, powder coat polyester with phosphate
SERIES LAMP TYPE pretreatment to ensure superior adhesion.
8 = 2-F8T5 (12”)
OPTIONS BALLAST: Standard 120 Volt, Class P.
13 = 2-F13T5 (21”)
CO = Convenience outlet
17 = 1-F17T8 (24”) Weight: 1 ft = 2.2 lbs. (1 kg), 2 ft. = 4.4 lbs. (2 kg)
SW = Switch
32 = 1-F32T8 (48”)
Custom colors upon request Modifications are available to suit custom requirements

M290 Series Watertight Incandescent Light Fixture – AC or DC – Surface Mount


Applications: Refrigerated spaces, detail light, small areas
HOUSING: Manufactured of cast aluminum. Packed with three
gland nut and washer assemblies.
LENS: Thermoformed 1/4” acrylic, secured to the housing with
four captive screws. Gasketed with a sealed closed cell
extruded neoprene.
How To Order Example: M290-W-TS LAMP: Double Contact Bayonet Candelabra Style (not
included).
FINISH: White, powdercoat polyester, inside and out,
SERIES LENS OPTIONS phosphate pretreated to ensure superior adhesion and rust
W = White Acrylic TS = Toggle Switch
R = Red Acrylic
resistance.
UL Listed 1598 B = Blue Acrylic
P = Clear Prismatic Acrylic
Available with either a white or red diffusing lens, and with or
without DPST toggle switch. Supplied with a boot for the toggle
Weight = 1.5 lbs. (.75 kg) switch. Three gland nut and washer assemblies are packaged
with the light fixture for additional branch lighting circuits.

M506 Series Twin Fluorescent Detail Light Fixture – Surface or Corner Mount
M506 Series is available with a duplex receptacle or a single
receptacle with a toggle switch.
HOUSING: Manufactured of marine grade aluminum.
LENS FRAME: Manufactured of marine grade aluminum.
Hinged the full length on one side, and latched with two spring
loaded quarter turn fasteners for easy access to lamps and
maintenance of the fixture.
Applications: Mirror lighting fixture, work stations, crew LENS: One piece flat 1/8” thick prismatic acrylic
quarters, corridors / stairwells
LAMP HOLDERS: Fluorescent lampholders are installed with
Optional Stuffing Tube, Convenience Receptacles spring loaded lampsocket devices to hold the lamps securely in
U.L. Listed 1598A Marine, U.S.C.G. - ABS position.
How To Order Example: M506-20-SJO FINISH: White, powder coat finish, inside and out, phosphate
pretreated to ensure superior adhesion and rust resistance.
SERIES LAMP TYPE FEATURES OPTIONAL BALLAST: HPF type. Operates at 120 volt, 60 Hertz.
20 = 20W T12 (2 ft.) A = Duplex Receptacle SJO = 10 ft. of 16/3
40 = 40W T12 (4ft.) B = Single Receptacle cable Weight: = 15 Lbs. (7kg)
For use with receptacle and/or switch with DPST Toggle ST = Stuffing Tube
15 = 15W T12 (2 ft.) Switch
Modifications are available to suit custom requirements
30 = 30W T12 (4 ft.)

The L.C. Doane Company Call 1-860-767-8295 to request


P.O. Box 975 • Essex, CT 06426 catalog of our complete line of
Tel: (860) 767-8295 • Fax: (860) 767-1397 Commercial and Military
www.lcdoane.com • sales@lcdoane.com Shipboard Lighting
175-04 4/26/06 9:11 PM Page 1

179-06

L.C. DOANE COMPANY


M711 Series Dampa-Style Fluorescent Fixture

M711 Series universal mounting brackets are designed to allow UL 1598A Marine
either perpendicular or parallel installation. One fixture does U.S.C.G. - ABS
both jobs.
HOUSING: Cold rolled steel. Fits suspended ceiling systems
using standard 11-13/16" (300mm) linear ceiling panels with
1" (25mm) recess. Gap between housing and door on all sides
provides clearance for ceiling panel lip, thus eliminating on-site
ceiling panel notching.

DOOR: Marine Grade Aluminum. Hinged door, retained with


captive 1/4 turn closure screws, is one ceiling panel wide by
four panels long and features slide-off removal from housing.
LENS: Prismatic acrylic diffuser
LAMPS: 32W, 40W, or 60W HO Lamps retained by vibration
resistant spring loaded lampholders.
FINISH: White, powder coat polyester.
BALLAST OPTIONS: Magnetic, Electronic, and Emergency.
Weight: 4 ft. with Electronic Ballast = 21 lbs. (9.55 kg)
Also available in 2 foot version

M800 Series Surface Mount Fluorescent Light Fixture

For Hazardous Locations UL 844


UL 1598A Marine
Class I, Division II
U.S.C.G. - ABS
HOUSING: Die formed brushed heavy-duty stainless steel, or Class 1, Div. 2,
finished marine grade aluminum, with continuously welded Groups A, B, C, D
seams. 3/4 NPT welded hub provided on both ends.

DOOR: Die formed brushed heavy-duty stainless steel. Door


retains clear 1/8” acrylic, polycarbonate or glass lens and hinges
freely from either side of fixture.

LATCH RAILS: Stainless steel, providing full length


compression between lens and continuous neoprene gasket.
Quick release design permits tool-less replacement of lamps, Applications
lens and door. • Corrosive Environments
MOUNTING: 14 Gage stainless steel 110° swivel brackets • Work Stations
permit direct surface mounting and accommodate standard 2” • Wet Locations
U bolt pipe clamps. • Oil Platforms
• Processing Plants
FINISH: Brushed stainless steel standard. Optional white
polyester powder coat. • Engine Rooms

LAMP / BALLAST: Accommodates two T8 or T12 lamps with


standard 120 Volt, HPF, Class P ballast. Provided with vibration
resistant, spring loaded, lampholders. SERIES LAMP TYPE HOUSING LENS OPTIONS
32 = 32W T8 SR = Brushed 09 = Acrylic E1 = One lamp
Weight (Approx.): Stainless Steel = 36 lbs. 40 = 40W T12 Stainless Steel 30 = Polycarbonate emergency service
60 = 60W T12 HO AW = White (AC Only)
Aluminum = 30 lbs. 90 = Glass
Aluminum DC = 12/24 Volt DC
SW = White (not for HO Lamps)
Stainless Steel DR = Acrylic Drop
Lens

Marine Offshore Electric Services


3612 Mangum, Suite 104 See the L.C. Doane
Houston, TX 77092 M3, M607 and M608 Lights
Tel: 713-681-0512 • Fax: (713) 688-1055 in the Advertising Section
eydabbs@aol.com • www.offshorelighting.com
0176-04 4/26/06 9:11 PM Page 1

180-06

ALTERNATING POWER OUTLET (APO)


Specifications:
1.0 Style 4 pole, (3P + G)
2.0 Rating 30 Amp 250 VAC 32 Amp 480 VAC
50 Amp 250 VAC 60 Amp 250 VAC
60 Amp 480 VAC
3.0 Enclosure
3.1 Pad-lockable latch Stainless Steel
3.2 Feet Non-skid Rubber
3.3 Carry Handle Aluminum with Epoxy Powder Coat
Finish
4.0 Pilot Lights Green flush mounted
5.0 Timer Solid state, adjustable
6.0 External Fasteners Stainless Steels
7.0 Cable Flexible, multi-strand #8/4 through #6/4;
standard 6’ cable length
8.0 Agency Recognition U.L. Listed

Service Application:
The Alternating Power Outlet (APO) is a portable power distribution box which provides an alternative means of powering reefer or
tank containers when there is a shortage of outlets. The APO is designed for outdoor use and is available with any of the standard reefer
electrical configurations from 30-60 Amps and 250-480 Volts. The APO is comprised of an enclosure with two female fixed receptacles
and a single male plug attached with a short length of flexible cable. When the connections are secured and the power is engaged then
the two female receptacles are energized on an alternating basis, with the on/off time interval set by the user to be any time between
5 minutes and three hours. Both container plugs remain permanently connected to the APO but only one receptacle is energized at
any given time. This means that the upstream circuit is not overloaded, which can occur with Y-cords or common distribution boxes.

Features: Ordering Information:


• “Dead Front” internal construction and interlocked cover for maximum operator safety. Rating APO Catalog #
• Individual pilot lights to identify “live” receptacle. 30A/250VAC 3034APO
32A/480VAC 3334APO
• Pad-lockable cover. 50A/250VAC 5034APO
• Single internally adjustable solid-state timer with 5 minutes to 30 hours “on” time per outlet. 60A/250VAC 6234APO
• Handle design provides integral cord storage and ease of portability. 60A/480VAC 6434APO

• Non-skid feet minimize shifting and elevate enclosure above standing water.

Dimensions: Inches (millimeter) Wiring Diagram


3334APO Shown

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0177-04 4/26/06 9:12 PM Page 1

181-06

FIXED RECEPTACLES – SERIES 30 + 50 AMP, 250 VAC; 32 AMP, 480 VAC


Boxes are configured from receptacles, adapters and junction boxes, each ordered separately (as noted)

FIXED RECEPTACLE WITH BACK BOX FIXED RECEPTACLE WITH BACK BOX AND
30 AMP, 3 Pole, 4 Wire, 250 VAC
Molded Polyamide Receptacle Housing with Copper-free
ANGLE ADAPTER
Aluminum Back Box. 30 AMP, 3 Pole, 4 Wire, 250 VAC
3034FRXTS + SAM50 + JM99 Molded Polyamide Receptacle Housing with Copper-free
Aluminum Back Box and Angle Adapter.
3034FRXTS + AM50 + JM99

FIXED RECEPTACLE WITH ANGLE ADAPTER


AND BACK BOX FIXED RECEPTACLE WITH ANGLE ADAPTER
50 AMP, 3 Pole, 4 Wire, 250 VAC AND BACK BOX
Molded Polyamide Receptacle Housing with 50 AMP, 3 Pole, 4 Wire, 250 VAC
Copper-free Aluminum Back Box. Molded Polyamide Receptacle Housing with Copper-free
5034FRXTS + SAM50 + JM99 Aluminum Angle Adapter and Back Box.
5034FRXTS + AM50 + JM99

FIXED RECEPTACLE WITH BACK BOX FIXED RECEPTACLE WITH ANGLE ADAPTER
32 AMP, 3 Pole, 4 Wire, 480 VAC AND BACK BOX
Polycarbonate Receptacle Housing with 32 AMP, 3 Pole, 4 Wire, 480 VAC
Copper-free Aluminum Back Box. Polycarbonate Receptacle Housing with Copper-free
3334FRVF + SAM32 + JM99 Aluminum Angle Adapter and Back Box.
3334FRVF + AM32 + JM99

www.manning-electric.com
Stocking Distributor for
MIPCO Russellstoll ®
TM
Thomas & Betts

154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0178-04 4/26/06 9:13 PM Page 179

182-06

MALE INLET & CONNECTOR FOR BARGES & WORKBOATS


Rating:
30 Amp, 250 V; 20 Amp, 600 VAC
2 Pole + Ground

Catalog No: 3809P – Connector


3799PA – Male Inlet w/Aluminum Back Box
3799P – Male inlet w/Brass Back Box

Features:
• Thermoplastic housings are watertight when mated, non-conductive
and resistant to damage and corrosion in harsh environments.
• Shrouded brass sleeves on the connector are protected from abuse
for long life and reliable electrical contact. 3809P (Connector) & 3799PA (Male Inlet)
• Neoprene sealing glands on the connector for a watertight seal Thermoplastic Housings
at cable entrance.
• Pins on the male inlet have O-rings for added waterproofing.

Service Application:
• Distributed Power: Barges – Pumps, Nav lights, extension cords
Generators – remote machinery & lighting
• Industrial Machinery: Portable batch process equipment
Reverse service safety installations

Specifications:
1.0 Style 2P + G
2.0 Rating 30 Amp, 250 V; 20 Amp, 600 VAC
3.0 Terminals
3.1 Contacts Male Inlet: pins (3)/Connector: sleeves
3.2 Connection Male Inlet: pressure screws/Connector: binding head screws
3.3 Interior Markings 1, 2 and G-Ground
4.0 Collar Connector: Locking screw collar
5.0 Flap Cover Male Inlet: Spring activated, gasketed
6.0 Entry Type Maximum 1” NPT conduit for junction box
7.0 Materials
7.1 Housing, Gland Nut, High impact polycarbonate
Flap Cover, Screw Collar
7.2 Interior Molded thermoset
7.3 Contact Pins Brass
7.4 Gaskets Neoprene
7.5 O-rings Male Inlet: Buna-N (Nitrile)
7.6 External Fasteners Stainless Steel

Male Inlet 3799P Connector 3809P

2.3"
58.4 mm

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0179-04 4/26/06 9:14 PM Page 178

183-06

• Shore to Ship Interlocked Electrical Power Distribution Systems


• Welding & Portable Electrical Power Connectors
Max-Gard 100A Welding
400A Shore Power
• 24 voltage polarizations each: 30, 60, 100, 200 & 400 Amps 30-400 Amps or Shore Power
meet safety interface guidelines Plug DS1504MP000 DS4504MP000
• Std. plugs Marine and XP rated Receptacle DS1504FR000 DS4504FR000
Connector DS1504FP000 DS4504FP000
• Load-breaking rated performance-delayed action safe withdrawal
Male Inlet DS1504MR000 DS4504MR000
• Live contacts isolated thru gated dead-front receptacles, Interlocked
connectors & interlock systems C/B Protected DBRS150410000 DBRS450440000
• Housings use 2 layer electrostatic epoxy coating for service life NEMA 4x Receptacle
4P5W, 277/480 VAC - 3 Ø + N + G Polarization shown
• O-ring sealed construction. Watertight even when unmated.
All sizes have 2 Control Contacts option for external contactor
or monitor systems operation

100 Amp 400 Amp (600 Amp avail.)


Plug Connector Plug Connector

Receptacle Switched Interlock


Receptacle
Male Inlet

HARDWARE Full Line of Mipco & Russellstoll Russellstoll ®

Electrical Products IN STOCK


SPECIALTY CO. BOXES • SWITCHES • CIRCUIT BREAKERS
3419 11th Ave. S.W., Seattle, WA 98134 NAVY TUBES • WELD PARTS • FIXTURES
Tel: 206-624-5785 • Fax: 206-682-0186 SHIPBOARD/COMMERCIAL CABLE
http://home.att.net/~hardspec/ DC MOTORS • BLOWERS • ETC.
0180-04 4/26/06 9:15 PM Page 1

184-06

SHIP TO SHORE CONNECTORS W

50 Amp, 125 Volt, 2 Pole 3 Wire, Corrosion Resistant 50A 125V

HBL503RI
HBL77CM74WO
HBL7774WO

HBL61CM53 HBL61CM53W
HBL61CM43 HBL61CM43W

HBL503NM
HBL63CM61

HBL63CM60

HBL63CM70
S750

HBL77CM16
HBL503SS HBL77CM15 HBL77CM17

HBL503RI – Stylized type 316 HBL503SS – Metallic, traditional style HBL77CM67* – Nickel plated brass HBL63CM61 – Nickel plated brass
stainless steel shore power inlet has shore power inlet has gasketed, self- cord clamp assembly with clamp plug has heat resistant thermoset
easy to use push-button latch that closing cover so interior is shielded range of .437-1.140” (11.1-29.0) interior and combination metal and
makes unit watertight when fully from the elements when not in use. provides strain relief for terminations rubber cord grip, provides superior
engaged. Interior is heat resistant Watertight when cover is securely on #HBL63CM72. strain relief capability. Cord grip
thermoset material and has box lug fastened. Mounting holes are 2-3⁄8” HBL77CM17 – Yellow Seal-Tite range is .437-1.140” (11.1-29.0).
terminals. Mounting holes are 2-3⁄8” (60.3) on centers, and rear portion has cover for weatherproofing connector HBL77CM16 – Yellow Seal-Tite®
(60.3) on centers and match existing 2.171” (55.1) diameter. Mounting bodies on extension cords or cover for weatherproofing plugs.
mounting patterns. Mounting screws screws and gasket included. adapters. IP55 suitability. IP55 suitability.
and gasket included. CR16277* – Replacement HBL61CM53 – 50’ (15.2m) yellow HBL63CM70 – Single receptacle
HBL503NM – Stylized non-metallic interior for #HBL63CM72 and vinyl jacketed shore power cable has a heat resistant thermoset base.
shore power inlet has UV resistant #HBL503SS shore power inlets. set. #6AWG, completely factory
white Centrex cover which makes pre-wired with molded-on devices. HBL77CM74WO – Yellow poly-
HBL63CM60 – Nickel plated brass
unit weatherproof when completely Connector end has threaded sealing carbonate lift cover plate for
connector body has heat resistant
closed. Interior is heat resistant ring to make inlet/connector weatherproofing 50A receptacles.
thermoset interior and combination
thermoset material and has box lug interface watertight. Meets requirements of the most
metal and rubber cord grip provides
terminals. Mounting holes are 2-3⁄8” HBL61CM53W – Same as stringent of UL’s three listing
superior strain relief capability. Cord
(60.3) on centers and match existing #HBL61CM53 except in white. categories for weatherproof plates.
grip range is .437-1.140” (11.1-29.0).
mounting patterns. Mounting screws Stainless steel screws and a
HBL77CM15 – Yellow Seal-Tite® HBL61CM43 – Same as #HBL61CM53,
and gasket included. neoprene gasket included. For
cover for connector bodies when except 25’ (7.6m) in length.
mounting to FS/FD type
SR3050* – Protective rear cover for HBL61CM43W – Same as
used with shore power inlets. weatherproof boxes. IP44 suitability.
all inlets. Secures to back of inlets #HBL61CM43 except in white.
Threaded sealing ring makes con-
with 3 screws which are provided. HBL7774WO – Same as
nections watertight. IP55 suitability. YC306250* – 3 conductor, #6AWG
#HBL77CM74WO except gray
type STO, yellow PVC jacketed
HBL60CM75* – Nickel plated brass in color. IP44 suitability.
portable cord with jute fillers for
adapter plate for mounting chrome
added flexibility. Ideal for making S750 – Stainless steel wallplate
plated brass shore power inlets to
cable sets, extension cords, and for 50A receptacle.
FS/FD box.
adapters and will not mark boat’s
*Not Shown deck. 250’ (76.2m) lengths only.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0181-04 4/26/06 9:16 PM Page 1

185-06

SHIP TO SHORE CONNECTORS X

W
G

50 Amp, 125/250 Volt, 3 Pole 4 Wire, Corrosion Resistant 50A 125/250V

HBL504RI

HBL504SS

HBL61CM52 HBL61CM52W
HBL61CM42 HBL61CM42W
HBL504NM

HBL77CM17 HBL63CM69
HBL77CM15

HBL77CM74WO
HBL7774WO
S750
HBL63CM64 HBL77CM16 HBL63CM65

HBL504RI – Stylized type 316 holes are 2-3⁄8" (60.3) HBL77CM17 – Yellow Seal-Tite HBL63CM65 – Nickel plated brass
stainless steel shore power inlet has on centers, and the rear portion has cover for weatherproofing connector plug has a heat resistant thermoset
easy to use push-button latch that a 2.171" (55.1) diameter. Mounting bodies when used on extension interior and combination metal and
makes unit watertight when fully screws and gasket are included. cords or adapters. IP55 suitability. rubber cord grip, which provides
engaged. Interior is heat resistant CR16279* – Replacement superior strain relief capability.
thermoset material and has box lug HBL61CM52 – 50' (15.2m) yellow
interior for #HBL63CM74 and vinyl jacketed shore power cable set. Cord grip range is .437-1.140"
terminals. Mounting holes are 2-3⁄8" #HBL504SS shore power inlets. (11.1-29.0).
(60.3) on centers and match existing #6 AWG is completely factory
mounting patterns. Mounting screws HBL63CM64 – Nickel plated brass pre-wired with molded-on devices. HBL77CM16 – Yellow Seal-Tite®
and gasket included. connector body has a heat resistant The connector end has a threaded cover for weatherproofing plugs.
thermoset interior and combination sealing ring for making the inlet/ IP44 suitability.
HBL504NM – Stylized non-metallic metal and rubber cord grip, which
shore power inlet has UV resistant connector interface watertight.
provides superior strain relief HBL63CM69 – Single receptacle
white Centrex cover which makes capability. Cord grip range is HBL61CM52W – Same as has a heat resistant thermoset base.
unit weatherproof when completely .437-1.140" (11.1-29.0). #HBL61CM52 except in white.
closed. Interior is heat resistant HBL77CM74WO – Yellow
thermoset material and has box lug HBL77CM15 – Yellow Seal-Tite® HBL61CM42 – Same as #HBL61CM52 polycarbonate lift cover plate for
terminals. Mounting holes are 2-3⁄8" cover for connector bodies when except 25' (7.6m) in length. weatherproofing 50A receptacles.
(60.3) on centers and match existing used with shore power inlets.
HBL61CM42W – Same as It meets the requirements of the
mounting patterns. Mounting screws Threaded sealing ring makes
#HBL61CM42 except in white. most stringent of UL’s three listing
and gasket included. connection watertight.
IP55 suitability. categories for weatherproof plates.
SR3050* – Protective rear cap for all YC406250* – Four conductor, Stainless steel screws and a
inlets. Secures to back of inlet with HBL60CM75* – Nickel plated brass #6AWG type STO, yellow PVC neoprene gasket are included for
3 screws which are provided. adapter plate for mounting chrome jacketed portable cord with jute mounting. Made for mounting to
plated brass shore power inlets to a fillers for added flexibility is ideal for
HBL504SS – Metallic, traditional FS/FD type weatherproof boxes.
FS/FD box.
style shore power inlet has a making cable sets, extension cords, IP55 suitability.
gasketed, self-closing cover so that HBL77CM67* – Nickel plated brass and adapters as it will not mark the
cord clamp assembly with a clamp boat’s deck. Available in 250' HBL7774WO – Same as
the interior is shielded from the
range of .437-1.140" (11.1-29.0) (76.2m) lengths only. #HBL77CM74WO except
elements when not in use. It is
watertight when the cover is provides strain relief for terminations gray in color. IP55 suitability.
securely fastened. The mounting on shore power inlets.
S750 – Stainless steel wallplate
for 50A receptacle.
*Not Shown

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0182-04 4/26/06 9:17 PM Page 1

186-06

STRAIGHT BLADE DEVICES TWIST-LOCK LOCKING DEVICES


15 Amp, 125 Volt, 2 Pole 3 Wire, Corrosion Resistant 15 Amp, 125 Volt, 2 Pole 3 Wire, Corrosion Resistant
G
W
G
W

15A 125V 15A 125V

HBL52CM66C
HBL60CM24

HBL60CM23

HBL74CM23WO
HBL7423WO
HBL52CM61 HBL52CM62
HBL61CM64

HBL47CM20C HBL52CM21
HBL52CM80C HBL52CM69C HBL5221
HBL47CM00
HBL52CM61 – Yellow single recep- HBL61CM64 – Compact gray nylon
tacle features heat resistant melamine panel mount inlet ideal for bass boat
body and abuse resistant nylon face. battery charging connection. Has
HBL52CM62 – Yellow duplex recep- gasketed spring-loaded lift cover for
tacle features heat resistant melamine weatherproofing front and neoprene
body and abuse resistant nylon face. boot for weatherproofing rear. Will
HBL52CM66C – Yellow Insulgrip® accept both 15A 125V and 20A
125V 2 pole, 3 wire straight blade HBL47CM15 HBL47CM29C HBL47CM16
plug has rugged nylon housing and
detachable cord grip with range of connector bodies.
HBL47CM00 – Yellow duplex recep- HBL47CM29C – Yellow Insulgrip
.296-.687" (7.5-17.4) that utilizes a HBL61CM64BK* – Same as
#HBL61CM64 except black in color. tacle has heat resistant melamine body. connector body has rugged nylon
unique offset jaws arrangement for
HBL52CM21 – Yellow housing and detachable cord grip
secure strain relief. HBL52CM21* – Yellow
polycarbonate spring-loaded lift with range of .296-.687" (7.5-17.4)
HBL60CM17* – Yellow Seal-Tite® polycarbonate spring-loaded lift
cover plate for weatherproofing cover plate for weatherproofing that utilizes a unique offset jaws
cover for weatherproofing straight
#HBL47CM00 duplex receptacle. #HBL47CM00 duplex receptacle. arrangement to provide secure
blade Insulgrip plugs, #HBL53CM66C
Stainless steel screws and neoprene Stainless steel screws and neoprene strain relief.
and #HBL52CM66C, when used to
mate receptacles and connector gasket included for mounting to gasket included for mounting to HBL60CM24 – Yellow Seal-Tite cover
bodies. Can also be used with FS/FD type weatherproof boxes. FS/FD type weatherproof boxes. for weatherproofing #HBL47CM29C
Insulgrip connector bodies when IP44 suitability. Not CSA. IP44 suitability. Not CSA. Insulgrip connector body when used
mating with flanged inlets. IP55 HBL5221* – Same as #HBL52CM21 on extension cords and adapters. IP55
HBL5221 – Same as #HBL52CM21
suitability. Not CSA. except gray in color. IP44 suitability. suitability. Not CSA.
except gray in color. IP44 suitability.
Note: Fits Insulgrip devices only. Not CSA.
Not CSA. HBL47CM15 – Panel mount flanged
HBL52CM69C – Yellow Insulgrip HBL52CM22* – Same as
HBL52CM22* – Same as #HBL52CM21 outlet has heat resistant melamine
connector body has rugged nylon #HBL52CM21 except for mounting
housing and detachable cord grip except for mounting to standard interior and nickel plated brass casing.
to standard boxes. IP44 suitability.
with range of .296-.687" (7.5-17.4) Not CSA. boxes. IP44 suitability. Not CSA. HBL47CM16 – Panel mount flanged
that utilizes a unique offset jaws HBL5222* – Same as #HBL52CM22 HBL5222* – Same as #HBL52CM22 inlet has heat resistant melamine
arrangement for secure strain relief. except gray in color. IP44 suitability. except gray in color. IP44 suitability. interior and nickel plated brass casing.
HBL60CM18* – Yellow Seal-Tite Not CSA. Not CSA. YC314250* – Three conductor,
cover for weatherproofing straight HBL74CM23WO – Yellow #14 AWG type STO, yellow PVC
blade Insulgrip connector bodies, HBL47CM20C – Yellow Insulgrip®
polycarbonate spring-loaded lift jacketed portable cord has jute fillers
#HBL53CM69C and #HBL52CM69C, cover plate for weatherproofing plug has rugged nylon housing and
detachable cord grip with range of for added flexibility and is ideal for
on extension cords and adapters. single straight blade receptacles.
IP55 suitability. Not CSA. .296-.687" (7.5-17.4) that utilizes a making cable sets, extension cords
Stainless steel screws and neoprene and adapters as it will not mark the
Note: Fits Insulgrip devices only. gasket included. For mounting to unique offset jaws arrangement to
provide secure strain relief. boat’s deck. Available in 250'
HBL52CM80C – Yellow Insulgrip FS/FD type weatherproof boxes.
(76.2m) lengths only.
plug with anchor locking screw to IP44 suitability. Not CSA. HBL60CM23 – Short yellow Seal-Tite®
prevent accidental pull-out. The plug HBL7423WO – Same as cover for weatherproofing #HBL47CM20C
is “locked” into the receptacle when #HBL74CM23WO except gray Insulgrip plug when used with recep-
the screw is turned down so the in color. Not CSA. tacles or connector bodies. Also can
head is flush with the plug surface. be used to weatherproof #HBL47CM29C
The cord grip range is .296-.687"
Insulgrip connector body when used
(7.5-17.4). Not UL or CSA listed.
with #HBL47CM16 flanged inlet.
IP55 suitability. Not CSA.
*Not Shown

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0183-04 4/26/06 9:17 PM Page 1

187-06

STRAIGHT BLADE DEVICES TWIST-LOCK LOCKING DEVICES


20 Amp, 125 Volt, 2 Pole 3 Wire, Corrosion Resistant 20 Amp, 125 Volt, 2 Pole 3 Wire, Corrosion Resistant
HBL52CM21
HBL5221

HBL7423WO
HBL74CM23WO HBL23CM13
HBL53CM66C
HBL23CM10

HBL53CM61 HBL60CM18
HBL53CM62 HBL60CM19

HBL23CM11

HBL53CM69C HBL60CM17 HBL61CM65 HBL74CM25WOA


HBL7425WOA
HBL53CM66C – Yellow Insulgrip® HBL61CM65 – Compact gray nylon
plug has rugged nylon housing and panel mount outlet ideal for electric
detachable cord grip with range of trolling motors and reel applications.
.296-.687" (7.5-17.4) that utilizes Features gasketed spring-loaded lift
unique offset jaws arrangement for cover for weatherproofing front and
secure strain relief. neoprene boot for weather proofing HBL60CM31
HBL53CM69C – Yellow Insulgrip rear. Accepts both 20A 125V and
connector body has rugged nylon 15A 125V 2 pole, 3 wire straight
housing and detachable cord grip blade plugs. HBL60CM32
with range of .296-.687" (7.5-17.4) HBL52CM22* – Yellow poly-
that utilizes unique offset jaws carbonate spring-loaded lift cover
arrangement for secure strain relief. plate for weatherproofing duplex HBL74CM25WOA – Yellow HBL23CM13 – Yellow Insulgrip con-
receptacles. Stainless steel screws polycarbonate spring-loaded lift nector body has rugged nylon housing
HBL60CM18 – Yellow Seal-Tite® cover cover plate for weatherproofing and detachable cord grip with range
for weatherproofing straight blade and neoprene gasket included. For
mounting to standard outlet boxes. #HBL23CM10A receptacle. Meets of .385-.785" (9.5-19.9) that utilizes a
Insulgrip connector bodies, the most stringent requirements of unique offset jaws arrangement to
#HBL53CM69C and #HBL52CM69C, on IP44 suitability.
UL’s three listing categories for provide secure strain relief.
extension cords and adapters. IP55 suit- HBL5222* – Same as #HBL52CM22 weatherproof plates. Stainless steel
ability. Note: Fits Insulgrip devices only. except gray in color. IP44 suitability. HBL60CM32 – Yellow Seal-Tite
screws and neoprene gasket cover for weatherproofing
HBL60CM19 – Yellow closure plug HBL52CM21 – Same as #HBL52CM22; included for mounting to FS/FD type #HBL23CM13 Insulgrip connector
used with #HBL60CM18 long Seal-Tite except for mounting to FS/FD type weatherproof boxes. IP44 suitability. body when used on extension cords
cover to prevent water from entering weatherproof boxes. IP44 suitability. HBL7425WOA – Same as and adapters. IP55 suitability.
front of device when not in use. HBL5221 – Same as #HBL52CM21 #HBL74CM25WOA except gray Note: Fits Insulgrip devices only.
HBL60CM17 – Yellow Seal-Tite cover except gray in color. IP44 suitability. in color. IP44 suitability. S720* – Satin finish 302 stainless
for weatherproofing straight blade HBL74CM23WO – Yellow poly- HBL23CM11 – Yellow Insulgrip® steel plate for #HBL23CM10A.
Insulgrip plugs, #HBL53CM66C and carbonate spring-loaded lift cover plug has rugged nylon housing and
#HBL52CM66C, when used to mate YC312250* – Three conductor,
plate for weatherproofing single detachable cord grip with range of #12AWG type STO, yellow PVC
receptacles and connector bodies. straight blade receptacles. Stainless .385-.785" (9.5-19.9) that utilizes a
Can also be used with Insulgrip jacketed portable cord with jute fillers
steel screws and neoprene gasket unique offset jaws arrangement to for added flexibility. Ideal for making
connector bodies when mating with included. For mounting to FS/FD type provide secure strain relief.
flanged inlets. IP55 suitability. cable sets, extension cords and adap-
weatherproof boxes. IP44 suitability. HBL60CM31 – Yellow Seal-Tite® ters as will not mark boat’s deck.
Note: Fits Insulgrip devices only.
HBL7423WO – Same as cover for weatherproofing Available in 250' (76.2m) lengths only.
HBL53CM62 – Yellow duplex #HBL74CM23WO except gray in color. #HBL23CM11 Insulgrip plug.
receptacle has heat resistant
HBL23CM10 – Yellow single IP55 suitability. Note: Fits Insulgrip
melamine body. Receptacle accepts
receptacle has heat resistant devices only.
both 20A 125V and 15A 125V 2
pole, 3 wire straight blade plugs. melamine body and abuse resistant
nylon face.
HBL53CM61 – Single version of
#HBL53CM62 duplex yellow
receptacle.
*Not Shown

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0185-04 4/26/06 9:18 PM Page 188

188-06

GROUND FAULT CIRCUIT INTERRUPTERS & SURGE SUPPRESSORS – Corrosion Resistant


Ground Fault Circuit Interrupter Portable Ground Fault Circuit
(GFCI) Receptacles Interrupters and Testers
These UL Listed receptacles have been designed to protect people from GFP15M – This unit is small and compact—
line-to-ground electrical shock hazards which may develop from faulty measuring only 4-3⁄16”H x 5-3⁄16”L x 6-11⁄16”W
appliance, tools or defective portable cords. If a ground fault does occur (10.6H x 13.2L x 17.0W) and weighing only
and the leakage level exceeds 4 to 6 milliamps, the GFCI unit quickly acts 3 pounds—yet protects as many as four tools
to protect the user by opening the circuit, thus interrupting the power at one time. The housing is high impact yellow
supply and limiting the duration of any electrical shock. After tripping, the polycarbonate as are the liftcovers which protect
receptacle is easily reset by pushing a button on its face. A test button the receptacles from dirt and damage. Simply
allows the user to test that the GFCI is in working order. insert the plug on the end of the 6’ (1.8m) cord
into any 60Hz 120V receptacle and then plug GFP15M
NOTE: GFCI receptacles will not protect against overloads or short circuits.
the equipment to be used into one of the receptacles on the unit.
GFCI receptacles can be mounted on any standard 2-1⁄2” (63.5) deep box.
A feed-thru feature provides protection not only at that receptacle but also GFP315A – 3-outlet plug-in unit (UL). Plugs into boat convenience
at any other receptacle located downstream from it on the same circuit. receptacles to provide ground fault protection.
These devices meet the requirements of The National Electric Code (1987) GFP15M & GFP315A SPECIFICATIONS
and American Boat and Yacht Council Standard E-8.15g (1985) and will Rating: 15A 120V 60Hz 2 pole 3 wire straight blade
accept locking fork terminals. Trip Level: 4-6 milliamps
Trip Time: .025 seconds nominal
Frequency: 60 Hertz nominal
Voltage: 120 volts +10%, -15%
GFCI Receptacles and Surge Max Interrupting Capacity: 2,000 amperes
Suppression Receptacles Max Humidity: 95% GFP315A
UL Class A
GF5252M* – 15A 125V brown GFCI duplex receptacle.
Brown nylon wall plate included.
GF5252MI* – Same as #GF5252M except receptacle GFT2G – This unit is designed to measure the trip level
and plate are ivory. of GFCI portables, receptacles, or breakers within
GF5252MW – Same as #GF5252M except receptacle any range from 2 to 7 milliamperes or the leakage
and plate are white. in portable tools or appliances within a leakage range
GF5252MW of 1 to 7 milliamperes. It can be used on any GFT2G
GF5252MGY* – Same as #GF5252M except receptacle
and plate are gray. AC circuit of 110 to 130V.
CWP26CR – Gray PVC weatherproof lift cover NOTE: The #GFT2G is not intended to determine incorrect receptacle
plate for ground fault receptacles (shown above) polarity, the “quality” of the ground, or any combination
and stylized receptacles (shown on opposite page). of incorrect wiring.
For vertical mounting in standard or FS/FD
type boxes.
HBL5200 – This outlet circuit tester has a simple arrangement
HBL5262IS – Ivory duplex surge of neon lights which visually indicate correct wiring,
suppression receptacle with reversed polarity, open ground wire, open neutral wire,
power on indicator light and open hot wire, hot and ground reversed and hot wire
damage-alert alarm beeper. on neutral terminal, and hot terminal unwired.
Simply plug the #HBL5200 into a single phase
125V 2 pole 3 wire outlet and the combination
of lighted and/or unlighted lamps will immediately
indicate the condition of the circuit. The instructions HBL5200
and symbol identification are printed on durable polyester labels
CWP26CR permanently attached to the tester. To test other 2 pole 3 wire single phase
HBL5262IS
125V outlets, use one of the proper adapters.

GFCI Line Cord Devices


Ideal for personal plug-in protection at marinas and onboard boats when used with pumps, drills, sanders and
all portable electrical equipment. GFCI mechanism is watertight and approved for outdoor
use. High visibility yellow SJTW-A power cord resists moisture, chemicals and sunlight.
Two different lengths available.
GFP6C15M – 6’ (1.8m) line cord
GFP25C15M – 25’ (7.6m) line cord

*Not Shown

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0186-04 4/27/06 5:33 PM Page 1

189-06

RECEPTACLES & SWITCHES – 15 & 20 Amp, 120-277 Volt, Corrosion Resistant

HBL1281 HBL1283
HBL6079 HBL5361 HBL52CM62I HBL8200ILI

HBL1221IL HBL1221PL CS115/CS315

Switches
HBL2132MI CRO15 CRO20I HBL5251 CS115 – Single-pole toggle switch HBL1223IL* – 20A 120V three-way
for controlling AC load from one toggle switch with illuminated ivory
point-brown handle. See Note A handle for controlling AC load from
Receptacles two points. Handles illuminate
CS115GY* – Same as #CS115 when “OFF.”
HBL2132M* – 15A 125V brown CRO20WHI* – Same as #CRO20
except gray handle. See Note A
duplex receptacle. See Note A except white. See Note A HBL1221PL – 20A 120V single-pole
HBL2132MI – Same as #HBL2132M HBL5251 – 15A 125V brown CS115I* – Same as #CS115 except toggle switch with neon lamp set in
except ivory. See Note A single receptacle. ivory handle. See Note A clear red handle. Handle illuminates
CS115W* – Same as #CS115 except when switch is “ON.” Serves as
HBL2132MW* – Same as HBL5251l* – Same as #HBL5251 instant reminder that current is
#HBL2132M except white. except ivory. white handle. See Note A
flowing to an appliance.
See Note A HBL5361 – 20A 125V brown CS315 – Three-way toggle switch for
HBL1223PL* – 20A 120V three-way
HBL2132MGY* – Same as single receptacle. controlling AC load from two points.
toggle switch for controlling AC load
#HBL2132M except gray. Brown handle. See Note A
HBL5361I* – Same as #HBL5361 from two points. Red handle
See Note A except ivory. CS315GY* – Same as #CS315 illuminates when “ON.”
CRO15 – 15A 125V brown duplex except gray handle. See Note A HBL1281 – Single-pole press switch
HBL52CM62* – 15A 125V yellow
receptacle. See Note A corrosion resistant duplex for controlling AC load from one
CS315I* – Same as #CS315 except
CRO15BLK* – Same as #CRO15 receptacle. Use where salt or other ivory handle. See Note A point. Switch activated brown button.
except black. See Note A corrosive elements are a problem. HBL1281I* – Same as #HBL1281
CS315W* – Same as #CS315 except
CRO15GRY* – Same as #CRO15 HBL52CM62BN* – Same as white handle. See Note A except ivory button.
except gray. See Note A #HBL52CM62 except brown. HBL1283 – Single-pole press switch
HBL1221IL – 20A 120V toggle
CRO15l* – Same as #CRO15 HBL52CM62I – Same as switch with neon lamp set in ivory for controlling AC load from one
except ivory. See Note A #HBL52CM62 except ivory. handle. Handle illuminates when point. Brown button.
CRO15WHI* – Same as #CRO15 HBL8200ILI – Illuminated switch is in “OFF” position. HBL1283I* † – Same as #HBL1283
except white. See Note A receptacle 15A 125V grounding. except ivory button.
A high quality receptacle with
CRO20* – 20A 125V brown duplex
something extra: an illuminated Weatherproof Switch Plates
receptacle. See Note A
face. Ideal for use in halls or as a
CRO20BLK* – Same as #CRO20 gentle night light. HBL17CM50† – Yellow neoprene HBL1795 – Clear silicone rubber
except black. See Note A weatherproof plate for use only with weatherproof bubble plate for use
HBL6079 – Plastic switch/receptacle press switches. with all AC toggle
CRO20GRY* – Same as #CRO20 box. Measures 3-9⁄32” x 2-3⁄16” Press switch button switches and press
except gray. See Note A x 2-1⁄2” (83.3 x 55.6 x 63.5) deep. is activated when switches. Also
CRO20I – Same as #CRO20 except For mounting in walls without studs. bubble is pressed. ideal for use with
ivory. See Note A A support strap is provided which Not CSA. lighted handle
pulls box tightly against back side toggle switches.
of wall. Not CSA.
*Not Shown
† Not UL Listed
NOTE A: Will accept locking fork terminal to comply with ABYC standards. HBL17CM50 HBL1795

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0188-04 4/26/06 9:20 PM Page 1

190-06

SMOOTH METAL WALL PLATES


Super Stainless
Anodized 0.04 Steel
Gang Description Aluminum Brass Type 302/304
1 1 Toggle Switch A1 B1 S1
2 2 Toggle Switches A2 B2 S2
3 3 Toggle Switches WCAL3-001-001-001 B3 S3
4 4 Toggle Switches WCAL4-001-001-001-001 B4 S4
5 5 Toggle Switches WCAL5-001-001-001-001-001 B5 S5
6 6 Toggle Switches WCAL6-001-001-001-001-001-001 B6 S6
1 1 Duplex Outlet A8 B8 S8
2 2 Duplex Outlets A82 B82 S82
3 3 Duplex Outlets A83 B83 S83
1 1 Single Outlet A7 B7 S7
2 2 Single Outlets A72 B72 S72
3 3 Single Outlets WCAL3-007-007-007 WCBR3-007-007-007 WCSS3-007-007-007
1 1 Blank A13 B13 S13
2 2 Blanks A23 B23 S23
3 3 Blanks WCAL3-013-013-013 WCBR3-013-013-013 S33
1 1 Telephone A12 B12 S12
2 2 Telephones WCAL2-012-012 WCBR2-012-012 S22

1 1 GFCI Duplex Outlet WCAL1-026 WCBR2-026 S26

1 Toggle Switch &


2 WCAL2-001-008 B18 S18
1 Duplex Outlet
Dia.
1 Toggle Switch &
1.40 2 WCAL2-001-007 WCBR2-001-007 S17
1 Single Outlet
Dia. 1 Single Outlet &
1.40 2 WCAL2-007-008 B78 S78
1 Duplex Outlet
2 Toggle Switches
3 WCAL3-001-001-008 WCBR3-001-001-008 S28
& 1 Duplex Outlet
1.593" Opening for
1 A720 B720 S720
1.562" Dia. Device
1.734" Opening for
1 N/A N/A S725
1.718" Dia. Device
2.156" Opening for
1 A723 WCBR1-098 S723
2.093" Dia. Device

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0189-04 4/26/06 9:21 PM Page 1

191-06

Straight Blade Devices


2 Pole, 3 Wire Grounding 1.63"
(41.4)
Heavy Duty, Specification Grade Receptacles
G

15 Ampere, 125 Volts W

NEMA 5-15R
Heavy Duty, Specification Grade, 15A 125V
UL CSA
3.28" 2.72"
(83.3) (69.0)
Duplex Receptacles 0.5 HP

Description Color Catalog


Numbers 1.13"
(28.7)
Flush, nylon face, back and side wired, Brown HBL5262
slotted screws. Ivory HBL5262I
Gray HBL5262GY .97"
(24.6)
White HBL5262W
Red HBL5262R 3.28" HBL5262
Black HBL5262BK (83.3)

Heavy Duty, Specification


Grade, Single Receptacles #6-32
.94" Tap
Description Color Catalog (23.9)
Numbers
Flush, nylon face, back and side wired. Brown HBL5261 HBL5261
Ivory HBL5261I
1.39" 1.94"
Heavy Duty, Specification Grade, (35.3) (49.3)
Special Purpose Duplex Receptacles
Description Color Catalog .86"
Numbers 1.63"
(21.8) (41.4)
On 4" (101.6) round cover. Brown HBL5282 HBL5284

Special Purpose Single Receptacles 1.63"


Description Color Catalog (41.4)
Numbers
On a 4" (101.6) round cover. Brown HBL5281
Panel mount on 1.94" (49.3) centers. Brown HBL5284

3.28" 2.72"
(83.3) (69.1)

15 Ampere, 250 Volts 1.63"


G (41.4)

.97"
NEMA 6-15R
(24.6)
1.94"
Heavy Duty, Specification Grade, 15A 250V
UL CSA
HBL5662 (49.3)
Duplex Receptacles 1.5 HP

Description Color Catalog Numbers


1.19" .875"
Flush, nylon face, back & side wired. Brown HBL5662 (30.2) (22.2)
Ivory HBL5662I HBL5684

1.94"
(49.3)
Heavy Duty, Specification Grade, Single Receptacles
Description Color Catalog Numbers
Flush, nylon face, back & side wired. Brown HBL5661
Ivory HBL5661I
Panel mount 1.94" (49.3) centers. Brown HBL5684
1.63"
(41.4)
HBL5661

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0190-04 4/26/06 9:22 PM Page 1

192-06

15 and 20 Ampere, 120-277 Volt AC Switches


Industrial – Institutional, Heavy Duty Specification Grade
Toggle and Lock Type AC Switches with Ground Screw
Specification Grade AC Switches, Back and Side Wired
#6-32
TAP 15A, 120-277V AC
Catalog Numbers
Description Single Pole Double Pole Three Way Four Way
3.28" 2.28" Brown nylon toggle. HBL1201 HBL1202 HBL1203 HBL1204
(83.3) 2.38" (57.9)
(60.5) Ivory nylon toggle. HBL1201I HBL1202I HBL1203I HBL1204I
1.05" Gray nylon toggle. HBL1201GY – HBL1203GY HBL1204GY
(26.7)
White nylon toggle. HBL1201W – – –
1.0"
(25.4) Red nylon toggle. HBL1201R – – –
1.25" Lock type. HBL1201L HBL1202L HBL1203L HBL1204L
(31.8)
Key for lock switches. HBL1209
HBL1221
20A, 120-277V AC
#6-32 Catalog Numbers
TAP Description Single Pole Double Pole Three Way Four Way
Brown nylon toggle. HBL1221 HBL1222 HBL1223 HBL1224
Ivory nylon toggle. HBL1221I HBL1222I HBL1223I HBL1224I
3.28" 2.38" 2.28"
(83.3) (60.5) (57.9) Gray nylon toggle. HBL1221GY HBL1222GY HBL1223GY HBL1224GY
White nylon toggle. HBL1221W HBL1222W HBL1223W HBL1224W
1.05"
(26.7) Red nylon toggle. HBL1221R HBL1222R HBL1223R HBL1224R
1.0" Black nylon toggle. HBL1221BK HBL1222BK HBL1223BK HBL1224BK
(25.4)
Lock type. HBL1221L HBL1222L HBL1223L HBL1224L
1.25"
(31.8) Key for lock switches. HBL1209
HBL1221L and Key
Specification Grade, Lighted and Pilot Light
Toggle Switches, Back and Side Wired
#6-32
TAP Lighted Toggle (light on with load off)
Catalog Numbers
Rating Description Single Pole Double Pole Three Way
3.28" 2.28" 15A 120-277V AC Ivory nylon toggle. HBL1201IL – HBL1203IL
(83.3) 2.38" (57.9)
(60.5) 20A 120-277V AC Ivory nylon toggle. HBL1221IL – HBL1223IL
1.05"
(26.7) 20A 120-277V AC Clear polycarbonate HBL1221ILC – HBL1223ILC
toggle.
1.0"
(25.4)

1.25"
Pilot Light (light on with load on)
(31.8)
Catalog Numbers
HBL1221ILC
Rating Description Single Pole Double Pole Three Way
15A 120-277V AC Red polycarbonate HBL1201PL – HBL1203PL
toggle.
#6-32
TAP 20A 120-277V AC Red polycarbonate HBL1221PL HBL1222PL HBL1223PL
toggle.
20A 120-277V AC Clear polycarbonate HBL1221PLC – HBL1223PLC
toggle.
3.28" 2.28"
(83.3) 2.38" (57.9) 20A 120-277V AC Green polycarbonate HBL1221PLG – HBL1223PLG
(60.5) toggle.
1.05"
(26.7) 30A 120-277V AC Red polycarbonate HBL3031PL HBL3032PL –
toggle.
1.0"
(25.4)
1.25" HP Conversion Chart
(31.8)
120V 240V
HBL1221PL
15A 1 HP 2HP
20A 11 ⁄2 HP 2HP

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0191-04 4/26/06 9:23 PM Page 1

193-06

Straight Blade Devices


2 Pole, 3 Wire Grounding
15 Ampere, 125 Volts and 250 Volts
Plugs and Connector Bodies G

Plugs– IP20 NEMA 5-15P


15A 125V
SUITABILITY
Phillips/Slotted Screws UL CSA
0.5 HP
1.97"
Description Cord Dia. Catalog Numbers (50.0)

Black and white nylon. .230-.720"


(5.8-18.3) HBL5266C™
1.53"
Finger grip, black neoprene, .312-.468" (38.9)
slotted screws. (7.9-11.9) HBL5921

W
HBL5266C

Connector Bodies– NEMA 5-15R


Phillips/Slotted Screws 15A 125V
UL CSA
2.78"
Description Cord Dia. Catalog (70.6)
Numbers
Black and white nylon. .230-.720"
(5.8-18.3) HBL5269C™ 1.53" 1.40"
(38.9) (35.6)
G

NEMA 5-15P HBL5269C


15A 125V
UL CSA
Plugs 0.5 HP

Description Cord Dia. Catalog


Numbers 1.88"
(47.8)
Yellow nylon. .220-.660"
(5.6-16.8) HBL5965VY® 1.25"
(31.8)
G

W 1.13"
(28.7)
NEMA 5-15R
15A 125V
Connector Bodies UL CSA
HBL5965VY
Description Cord Dia. Catalog
Numbers
Yellow nylon .220-.660"
(5.6-16.8) HBL5969VY™ 2.63"
(66.8)
G

1.25"
(31.8)
15A Plugs– NEMA 6-15P
15A 250V 1.13"
Phillips/Slotted Screws UL CSA
1.5 HP (28.7)

Description Cord Dia. Catalog Numbers


HBL5969VY
Plug, black and .230-.720"
white nylon. (5.8-18.3) HBL5666C
Plug, yellow nylon, .220-.660"
slotted screws. (5.6-16.8) HBL5666VY
G

15A only
NEMA 6-15R
15A 250V
Connector Bodies UL CSA

Description Cord Dia. Catalog Numbers


Connector, .230-.720"
black and white nylon, (5.8-18.3) HBL5669C
Phillips/slotted screws.
Connector, yellow nylon, .220-.660"
slotted screws. (5.6-16.8) HBL5669VY

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0192-04 4/26/06 9:24 PM Page 1

194-06

TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
15 Ampere, 125, 250 Volts and 277 Volts AC
Plugs and Connector Bodies

IP20 W
G
SUITABILITY

NEMA L5-15P
15A 125V 1.91" 2.63"
UL/CSA (48.5) (66.8)
Plugs 0.5 HP

Description Cord Dia. Catalog Numbers


1.53" 1.56"
Plug , .230-.720" HBL4720C (38.9) (39.6)
black and white nylon. (5.8-18.3)
Phillips / slotted screws.
Plug, yellow elastomer, .300-.655" HBL24W47 HBL4720C HBL24W47
water/dust tight. (7.6-16.6)
Plug, .220-.660" HBL4723VY 1.88"
(47.8) 2.78"
yellow nylon. (5.6-16.8) (70.6)

1.50"
W
G (38.1) 1.53" 1.41"
(38.9) (35.8)

NEMA L5-15R
15A 125V HBL4723VY
Connector Bodies UL/CSA HBL4729C

Description Cord Dia. Catalog Numbers


1.75"
Connector body, .230-.720" HBL4729C (44.5)
4.00"
2.59"
(65.8)
black and white nylon. (5.8-18.3) (101.6)
Phillips / slotted screws.
Connector body, .300-.655" HBL25W47 1.50"
yellow elastomer, (7.6-16.6) (38.1)
water/dust tight.
Connector body, .220-.660" HBL4729VY
HBL25W47 HBL4729VY
yellow nylon. (5.6-16.8)

Ordering Information - Duplex Locking Receptacles


Catalog Number Rating NEMA Description
HBL4700 15 Amp 125 Volt L5-15R Brown
HBL4700I 15 Amp 125 Volt L5-15R Ivory
HBL47CM00 15 Amp 125 Volt L5-15R Yellow, Corrosion Resistant
IG4700A 15 Amp 125 Volt L5-15R Orange, Isolated Ground
HBL4550 15 Amp 250 Volt L6-15R Brown
IG4550A 15 Amp 250 Volt L6-15R Orange, Isolated Ground
HBL4750 15 Amp 277 Volt L7-15R Brown
HBL7580† 10A 250V/15A 125A N/A Black (replacement use only)
HBL7580G† 10A 250V/15A 125A, grounding N/A Black (replacement use only)

Non NEMA, Not UL Listed, Not CSA Certified, Not Fed. Spec. W-C-596G

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0193-04 4/26/06 9:25 PM Page 197

195-06

CABLE MANAGEMENT PRODUCTS

Two tools for fishing cable: the Junior Pulling Grip is best
Junior Pulling Grips, Galvanized Steel
for pulling electrical cables, tubing, fuel lines, steering and Cable Diameter Approx. Breaking E M Catalog
control cables through conduits and other impossible to Range Inches (cm.) Strength Lbs. (N) Inches (cm) Model Numbers
reach places.The grip slides easily on the object, .19-.24 (.48-.61) 400 (1,779) 31 ⁄4 (8.25) 41 ⁄4 (10.79) J19 03305011
connects to a fish tape and the job is done. The pulling .25-.36 (.63-.91) 450 (2,002) 31 ⁄4 (8.25 41 ⁄4 (10.79) J25 03305001
sock is best for pulling all connectorized cables for radar,
.37-.49 (.94-1.24) 900 (4,003) 33⁄4 (9.52 7 (17.78) J37 03305002
depth finders and radios in the same areas.
.50-.61 (1.27-1.55) 1,300 (5,782) 41 ⁄4 (10.79) 81 ⁄2 (21.59) J50 03305003
.62-.74 (1.57-1.88) 1,950 (8,674) 5 (12.70) 10 (25.40) J62 03305004
.75-.99 (1.90-2.51) 2,800 (12,454) 53⁄4 (14.60) 10 (25.40) J75 03305005
1.00-1.24 (2.54-3.15) 3,900 (17,347) 61 ⁄2 (16.51) 111 ⁄2 (29.21) J100 03305006

Pulling Sock for Connectorized Cable, Nylon


Ring
Bundle/Size Range Approx. O/A Work Load Catalog
Length OD THK lbs. (N) Number
.125-.562" (3.18-14.27) 28" (711.20) .71" (18.03) .10" (2.54) 30 (133) CCPS1
.250-.750" (6.35-19.05) 31" (787.40) .71" (18.03) .10" (2.54) 40 (178) CCPS2
.750-1.750" (19.05-44.50) 33" (838.20) 1.57" (39.88) .16" (4.06) 50 (222) CCPS3 Patented

Stainless Steel Nylon/SST Strain Relief All Stainless Strain Relief


Mesh Grips Straight Male Thread Straight Male Thread
• For cable arc-of-
Grip Diameter Range Thread Size Catalog Grip Diameter Range Thread Size Catalog
bend control
and positive Inches (cm.) N.P.T. (Inches) Numbers Inches (cm.) N.P.T. (Inches) Numbers
pull-out protection .187-.250 (.47-.63) 074011331 . 187-.250 (.47-.63) CG404SST
• With liquid-tight .250-.375 (.63-.95) 074011332 .250-.375 (.63-.95) CG406SST
1 ⁄2" 1/2"
nylon or stainless .375-.500 (.95-1.27) 074011333 .375-.500 (.95-1.27) CG408SST
fittings .500-.625 (1.27-1.59) 074011334* .500-.625 (1.27-1.59) CG410SST
• For secure .375-.500 (.95-1.27) 074011335
and corrosion- .500-.625 (1.27-1.59) 074011336 .375-.500 (.95-1.27) CG608SST
3 ⁄4"
resistant electrical .625-.750 (1.59-1.90) 074011337 .500-.625 (1.27-1.59) CG610SST
3/4"
connections .750-.875 (1.90-2.22) 074011338* .625-.750 (1.59-1.90) CG612SST
.375-.500 (.95-1.27) 074011339 .750-.875 (1.90-2.22) CG614SST
.500-.625 (1.27-1.59) 074011340
.500-.625 (1.27-1.59) CG810SST
.625-.750 (1.59-1.90) 074011341
1" .625-.750 (1.59-1.90) CG812SST
.750-.875 (1.90-2.22) 074011342 1"
.875-1.000 (2.22-2.54) 074011343 .750-.875 (1.90-2.22) CG814SST
1.000-1.125 (2.54-2.86) 074011344* .875-1.000 (2.22-2.54) CG816SST
*Cable jacket may have to be stripped to pass through connector body.

Single Eye, Closed Mesh


For permanent support when cable end is available to be installed through grip.

Cable Diameter Approx. Breaking E M Catalog


Range Inches (cm.) Strength Lbs. (N) Inches (cm.) Inches (cm) Numbers
Stainless Steel Cable Supports .50-.62 (1.27-1.57) 530 (2,357) 7 (17.78) 10 (25.40) 02401013
Wire mesh grips that will support power, .63-.74 (1.60-1.88) 790 (3,514) 8 (20.32) 10 (25.40) 02401014
CATV, telephone and water lines as they E
.75-.99 (1.90-2.51) 1020 (4,537) 8 (20.32) 13 (33.02) 02401015
transition from shore to dock side, under
floating or stationary docks and 1.00-1.24 (2.54-3.15) 1610 (7,161) 9 (22.86) 14 (35.56) 02401017
for electrical cables on lighting poles. 1.25-1.49 (3.17-3.78) 1610 (7,161) 10 (25.40) 15 (38.10) 02401018
1.50-1.74 (3.81-4.42) 1610 (7,161) 12 (30.48) 17 (43.18) 02401019
1.75-1.99 (4.44-5.05) 2150 (9,563) 14 (35.56) 19 (48.26) 02401020
M
2.00-2.49 (5.08-6.32) 3260 (14,500) 16 (40.64) 21 (53.34) 02401021
2.50-2.99 (6.35-7.59) 3260 (14,500) 18 (45.72) 23 (58.42) 02401022
3.00-3.49 (7.62-8.86) 4900 (21,795) 21 (53.34) 25 (63.50) 02401023
3.50-3.99 (8.89-10.13) 4900 (21,795) 24 (60.96) 27 (68.58) 02401024

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0198-03 4/26/06 9:25 PM Page 1

196-06

MARINE INDUSTRIAL CABLE CORP.


COMMERCIAL SHIPBOARD CABLES
600 VOLTS – 90° C RATED
SPEC. #474

Single conductor, flameretardant thermoplastic & nylon insulated, *M/R & flameretardant thermoplastic jacketed,
Aluminum (A) or Bronze (B) armored, power cable
STNIA® STNIB®
Ambient No. Max. over- Approx. net Min.
Type Temp. Amps Stds. AWG Cndr. area all diam. wt. per radius
and Size @ per Size C/M in 1000 ft. of bend
40°C 45°C Cndr. in. cm Alum. Brz. inches
STNIA (B) - 3 14 13 7 16 2,583 .280 .711 38 59 1.8
STNIA (B) - 4 36 34 7 14 4,107 .290 .737 42 64 2.1
STNIA (B) - 6 45 43 7 12 6,530 .320 .813 55 86 2.2
STNIA (B) - 10 57 54 7 10 10,380 .360 .914 74 110 2.6
STNIA (B) - 16 71 68 7 8 16,510 .420 1.067 109 151 3.0
STNIA (B) - 26 92 88 7 6 26,250 .470 1.194 148 195 3.3
STNIA (B) - 41 124 118 7 4 41,740 .540 1.372 221 277 4.1
STNIA (B) - 66 164 156 7 2 66,370 .640 1.626 313 376 4.8
STNIA (B) - 83 189 180 19 1 83,690 .700 1.778 406 476 5.3
STNIA (B) - 106 217 207 19 1/0 105,500 .750 1.905 486 561 5.7
STNIA (B) - 133 252 240 19 2/0 133,100 .800 2.032 588 669 6.2
STNIA (B) - 168 292 278 19 3/0 167,800 .860 2.184 714 802 6.5
STNIA (B) - 212 340 324 19 4/0 211,600 .920 2.337 872 970 7.2
STNIA (B) - 250 377 359 37 250 250,000 1.030 2.616 1063 1175 8.0
STNIA (B) - 300 433 412 37 300 300,000 1.100 2.794 1237 1355 8.6
STNIA (B) - 350 468 446 37 350 350,000 1.160 2.946 1415 1540 9.0
STNIA (B) - 400 513 489 37 400 400,000 1.210 3.073 1590 1720 9.4
STNIA (B) - 500 588 560 37 500 500,000 1.320 3.353 1945 2086 10.0
STNIA (B) - 750 759 723 61 750 750,000 1.635 4.153 2849 3024 12.3
STNIA (B) - 1000 910 867 61 1000 1,000,000 1.839 4.671 3691 3886 13.9

Three conductor, flameretardant thermoplastic & nylon insulated, *M/R & flameretardant thermoplastic jacketed,
Aluminum (A) or Bronze (B) armored, power cable
TTNIA® Ambient No. Max. over- Approx. net Min. TTNIB®
Type Temp. Amps Stds. AWG Cndr. area all diam. wt. per radius
and Size @ per Size C/M in 1000 ft. of bend
40°C 45°C Cndr. in. cm Alum. Brz. inches
TTNIA (B) - 3 12 11 7 16 2,583 .430 1.092 95 144 3.4
TTNIA (B) - 4 25 24 7 14 4,107 .480 1.219 106 155 3.9
TTNIA (B) - 6 30 29 7 12 6,530 .520 1.321 142 197 4.2
TTNIA (B) - 10 40 38 7 10 10,380 .590 1.499 212 277 4.7
TTNIA (B) - 16 50 48 7 8 16,510 .730 1.854 321 400 5.2
TTNIA (B) - 26 68 65 7 6 26,250 .850 2.159 448 533 5.8
TTNIA (B) - 41 87 83 7 4 41,740 1.050 2.667 714 825 7.9
TTNIA (B) - 66 117 111 7 2 66,370 1.200 3.048 1008 1135 8.8
TTNIA (B) - 83 138 131 19 1 83,690 1.330 3.378 1268 1409 10.2
TTNIA (B) - 106 153 150 19 1/0 105,500 1.430 3.632 1514 1665 11.0
TTNIA (B) - 133 182 173 19 2/0 133,100 1.540 3.912 1836 1998 12.0
TTNIA (B) - 168 211 201 19 3/0 167,800 1.660 4.216 2250 2426 12.6
TTNIA (B) - 212 244 232 19 4/0 211,600 1.860 4.724 2736 2927 13.7
TTNIA (B) - 250 272 259 37 250 250,000 2.030 5.156 3337 3554 15.8
TTNIA (B) - 300 305 290 37 300 300,000 2.170 5.512 3897 4128 16.8
TTNIA (B) - 350 333 317 37 350 350,000 2.280 5.791 4458 4703 17.8
TTNIA (B) - 400 359 342 37 400 400,000 2.390 6.071 5042 5299 18.6
TTNIA (B) - 500 413 393 37 500 500,000 2.620 6.655 6161 6445 20.1

*M/R - Moisture Resistant Construction: Basically the same construction as Type DTNIA (or B), except four conductor
Current carrying capacity of four-conductor cable type FTNIA is the same as three conductor cables listed under type TTNIA

L.F. GAUBERT & CO., INC. MARINE INDUSTRIAL CABLE CORP.


700 S. Broad St. - P. O. Box 50500 - New Orleans, LA 70150 New Orleans, Louisiana
Tel: 504-822-7272 • Toll Free: 800-831-7534 Manufacturer of
Fax: 504-821-9309 Navy and Commercial Shipboard Cable
E-mail: sales@gaubertcable.com • www.gaubertcable.com Specialty Cable
0195-04 4/26/06 9:26 PM Page 1

197-06

MARINE INDUSTRIAL CABLE CORP.


COMMERCIAL SHIPBOARD CABLES
600 VOLTS — 90° C RATED

SPEC. #474
Double conductor, flameretardant thermoplastic
& nylon insulated, *M/R & flameretardant
thermoplastic jacketed, Aluminum (A) or Bronze
(B) armored, power cable

DTNIA® Ambient No. Max. over- Approx. net Min. DTNIB®


Type Temp. Amps Stds. AWG Cndr. area all diam. wt. per radius
and Size @ per Size C/M in 1000 ft. of bend
40°C 45°C Cndr. in. cm Alum. Brz. inches

DTNIA (B) - 3 13 12 7 16 2,583 .400 1.016 76 119 3.2


DTNIA (B) - 4 30 29 7 14 4,107 .460 1.168 88 137 3.7
DTNIA (B) - 6 38 36 7 12 6,530 .500 1.270 113 168 4.0
DTNIA (B) - 10 48 46 7 10 10,380 .560 1.422 171 232 4.5
DTNIA (B) - 16 63 60 7 8 16,510 .700 1.778 250 321 4.9
DTNIA (B) - 26 83 79 7 6 26,250 .790 2.007 353 434 5.5
DTNIA (B) - 41 106 101 7 4 41,740 .990 2.515 546 651 7.4
DTNIA (B) - 66 144 137 7 2 66,370 1.120 2.845 772 892 8.2
DTNIA (B) - 83 169 161 19 1 83,690 1.250 3.175 953 1086 9.6
DTNIA (B) - 106 192 183 19 1/0 105,500 1.340 3.404 1135 1277 10.3
DTNIA (B) - 133 245 233 19 2/0 133,100 1.450 3.683 1352 1504 11.3
DTNIA (B) - 168 257 245 19 3/0 167,800 1.560 3.962 1625 1790 11.8
DTNIA (B) - 212 298 284 19 4/0 211,600 1.680 4.267 1973 2152 12.8
DTNIA (B) - 250 332 316 37 250 250,000 1.900 4.826 2441 2644 14.5
DTNIA (B) - 300 372 354 37 300 300,000 2.030 5.156 2839 3016 15.5
DTNIA (B) - 350 406 387 37 350 350,000 2.140 5.436 3248 3476 16.6
DTNIA (B) - 400 440 419 37 400 400,000 2.240 5.690 3676 3886 17.4
DTNIA (B) - 500 503 479 37 500 500,000 2.450 6.223 4405 4670 18.8

Four conductor, flameretardant thermoplastic & nylon insulated, *M/R & flameretardant thermoplastic jacketed,
Aluminum (A) or Bronze (B) armored, power cable
FTNIA® Ambient No. Max. over- Approx. net Min. FTNIB®
Type Temp. Amps Stds. AWG Cndr. area all diam. wt. per radius
and Size @ per Size C/M in 1000 ft. of bend
40°C 45°C Cndr. in. cm Alum. Brz. inches

FTNIA (B) - 3 12 11 7 16 2,583 .460 1.168 114 160 3.6


FTNIA (B) - 4 25 24 7 14 4,107 .520 1.321 131 186 4.2
FTNIA (B) - 6 30 29 7 12 6,530 .560 1.422 175 236 4.5
FTNIA (B) - 10 40 38 7 10 10,380 .660 1.676 262 331 5.1
FTNIA (B) - 16 50 48 7 8 16,510 .820 2.083 406 490 5.8
FTNIA (B) - 26 68 65 7 6 26,250 .960 2.438 604 708 6.3
FTNIA (B) - 41 87 83 7 4 41,740 1.150 2.921 910 1035 8.6
FTNIA (B) - 66 117 111 7 2 66,370 1.290 3.277 1304 1445 9.6
FTNIA (B) - 83 138 131 19 1 83,690 1.460 3.708 1637 1793 11.1
FTNIA (B) - 106 158 150 19 1/0 105,500 1.560 3.962 1974 2142 12.2
FTNIA (B) - 133 182 173 19 2/0 133,100 1.700 4.318 2422 2605 13.4
FTNIA (B) - 168 211 201 19 3/0 167,800 1.900 4.826 2994 3201 14.0
FTNIA (B) - 212 244 232 19 4/0 211,600 2.050 5.207 3668 3892 15.2
FTNIA (B) - 250 272 259 37 250 250,000 2.240 5.690 4330 4575 17.4
FTNIA (B) - 300 305 290 37 300 300,000 2.390 6.071 5060 5321 18.6
FTNIA (B) - 350 333 317 37 350 350,000 2.520 6.401 5811 6042 19.8
FTNIA (B) - 400 359 342 37 400 400,000 2.640 6.706 6563 6853 20.8
FTNIA (B) - 500 413 393 37 500 500,000 2.970 7.544 8038 8350 22.5

Construction: Basically the same construction as Type DTNIA (or B), except four conductor
Current carrying capacity of four-conductor cable type FTNIA is the same as three conductor cables listed under type TTNIA
*M/R - Moisture Resistant

L.F. GAUBERT & CO., INC. MARINE INDUSTRIAL CABLE CORP.


700 S. Broad St. - P. O. Box 50500 - New Orleans, LA 70150 New Orleans, Louisiana
Tel: 504-822-7272 • Toll Free: 800-831-7534 Manufacturer of
Fax: 504-821-9309 Navy and Commercial Shipboard Cable
E-mail: sales@gaubertcable.com • www.gaubertcable.com Specialty Cable
0200-03 4/26/06 9:27 PM Page 1

198-06

MARINE INDUSTRIAL CABLE CORP.


COMMERCIAL SHIPBOARD CABLES
600 VOLTS – 90° C RATED
SPEC. #474

Multiple conductor, color coded, flameretardant thermoplastic & nylon insulated, *M/R & flameretardant
thermoplastic jacketed, Aluminum (A) or Bronze (B) armored, control cable

No. 16 AWG
MTNIA ®
Max. over- Approx. net Min. MTNIB®
Type No. of AWG Cndr. area all diam. wt. per radius
and Size Cndrs. Size C/M in 1000 ft. of bend
in. cm Alum. Brz. inches
MTNIA (B) - 4 4 16 2,580 .440 1.118 104 149 3.5
MTNIA (B) - 6 6 16 2,580 .532 1.351 136 191 4.3
MTNIA (B) - 7 7 16 2,580 .532 1.351 149 204 4.3
MTNIA (B) - 8 8 16 2,580 .589 1.496 172 237 4.7
MTNIA (B) -10 10 16 2,580 .672 1.707 217 285 5.4
MTNIA (B) -12 12 16 2,580 .692 1.758 251 322 5.5
MTNIA (B) -14 14 16 2,580 .718 1.824 278 349 5.7
MTNIA (B) -16 16 16 2,580 .739 1.877 307 378 5.9
MTNIA (B) -20 20 16 2,580 .782 1.986 364 438 6.3
MTNIA (B) -24 24 16 2,580 .902 2.291 415 498 7.2
MTNIA (B) -30 30 16 2,580 .950 2.413 533 631 7.6
MTNIA (B) -36 36 16 2,580 1.022 2.596 622 734 8.2
MTNIA (B) -37 37 16 2,580 1.022 2.596 635 749 8.2
MTNIA (B) -40 40 16 2,580 1.057 2.685 679 795 8.5
MTNIA (B) -44 44 16 2,580 1.134 2.880 742 859 9.1
MTNIA (B) -61 61 16 2,580 1.270 3.226 986 1,161 10.2
MTNIA (B) -91 91 16 2,580 1.506 3.830 1,460 1,630 12.1
*M/R - Moisture Resistant

L.F. GAUBERT & CO., INC. MARINE INDUSTRIAL CABLE CORP.


700 S. Broad St. - P. O. Box 50500 - New Orleans, LA 70150 New Orleans, Louisiana
Tel: 504-822-7272 • Toll Free: 800-831-7534 Manufacturer of
Fax: 504-821-9309 Navy and Commercial Shipboard Cable
E-mail: sales@gaubertcable.com • www.gaubertcable.com Specialty Cable
0201-03 4/26/06 9:28 PM Page 1

199-06

MARINE INDUSTRIAL CABLE CORP.


COMMERCIAL SHIPBOARD CABLES
600 VOLTS - 90° C RATED
SPEC. #474
Multiple conductor, color coded, flameretardant thermoplastic & nylon insulated, *M/R & flameretardant
thermoplastic jacketed, Aluminum (A) or Bronze (B) armored, control cable

No. 14 AWG
MTNIA® Max. over- Approx. net Min. MTNIB®
Type No. of AWG Cndr. area all diam. wt. per radius
and Size Cndrs. Size C/M in 1000 ft. of bend
in. cm Alum. Brz. inches
MTNIA (B) - 4 (4) 4 14 4,107 .480 1.219 157 209 3.8
MTNIA (B) - 6 (4) 6 14 4,107 .557 1.415 199 262 4.5
MTNIA (B) - 7 (4) 7 14 4,107 .557 1.415 220 283 4.5
MTNIA (B) - 8 (4) 8 14 4,107 .669 1.699 261 327 5.4
MTNIA (B) - 10 (4) 10 14 4,107 .720 1.829 332 415 5.8
MTNIA (B) - 12 (4) 12 14 4,107 .741 1.882 381 473 5.9
MTNIA (B) - 14 (4) 14 14 4,107 .775 1.969 424 515 6.2
MTNIA (B) - 16 (4) 16 14 4,107 .814 2.067 476 571 6.5
MTNIA (B) - 20 (4) 20 14 4,107 .894 2.499 622 748 7.2
MTNIA (B) - 24 (4) 24 14 4,107 1.027 2.609 712 842 8.2
MTNIA (B) - 30 (4) 30 14 4,107 1.082 2.748 841 973 8.7
MTNIA (B) - 36 (4) 36 14 4,107 1.159 2.944 1029 1194 9.3
MTNIA (B) - 37 (4) 37 14 4,107 1.159 2.944 1049 1214 9.3
MTNIA (B) - 40 (4) 40 14 4,107 1.240 3.150 1127 1298 9.9
MTNIA (B) - 44 (4) 44 14 4,107 1.292 3.282 1227 1403 10.3
MTNIA (B) - 61 (4) 61 14 4,107 1.359 3.452 1310 1585 10.9

No. 12 AWG
Max. over- Approx. net Min.
Type No. of AWG Cndr. area all diam. wt. per radius
and Size Cndrs. Size C/M in 1000 ft. of bend
in. cm Alum. Brz. inches
MTNIA (B) - 4 (6) 4 12 6,530 .533 1.354 198 261 4.3
MTNIA (B) - 6 (6) 6 12 6,530 .654 1.661 281 352 5.2
MTNIA (B) - 7 (6) 7 12 6,530 .654 1.661 310 381 5.2
MTNIA (B) - 8 (6) 8 12 6,530 .748 1.900 343 419 6.0
MTNIA (B) - 10 (6) 10 12 6,530 .809 2.055 423 517 6.5
MTNIA (B) - 12 (6) 12 12 6,530 .834 2.118 516 622 6.7
MTNIA (B) - 14 (6) 14 12 6,530 .872 2.215 573 679 7.0
MTNIA (B) - 16 (6) 16 12 6,530 .918 2.332 640 753 7.3
MTNIA (B) - 20 (6) 20 12 6,530 1.053 2.675 768 889 8.4
MTNIA (B) - 24 (6) 24 12 6,530 1.159 2.944 914 1063 9.3
MTNIA (B) - 30 (6) 30 12 6,530 1.216 3.089 1136 1288 9.7
MTNIA (B) - 36 (6) 36 12 6,530 1.314 3.338 1314 1485 10.5
MTNIA (B) - 37 (6) 37 12 6,530 1.314 3.338 1345 1516 10.5
MTNIA (B) - 40 (6) 40 12 6,530 1.408 3.576 1464 1647 11.3
MTNIA (B) - 44 (6) 44 12 6,530 1.468 3.729 1592 1782 11.7

*M/R - moisture resistant

L.F. GAUBERT & CO., INC. MARINE INDUSTRIAL CABLE CORP.


700 S. Broad St. - P. O. Box 50500 - New Orleans, LA 70150 New Orleans, Louisiana
Tel: 504-822-7272 • Toll Free: 800-831-7534 Manufacturer of
Fax: 504-821-9309 Navy and Commercial Shipboard Cable
E-mail: sales@gaubertcable.com • www.gaubertcable.com Specialty Cable
0202-03 4/28/06 2:57 PM Page 1

200-06

MARINE INDUSTRIAL CABLE CORP.


COMMERCIAL SHIPBOARD CABLES
5KV

SPEC. #472
CONFORMS TO IEEE STD. 45

SXIA Single conductor, flameretardant cross-linked polyethylene insulated, flameretardant & *M/R thermoplastic SXIB
jacketed Aluminum (A) or Bronze (B) armored power or control cable
Ambient
Max. over- Approx. net Min.
Temp. Amps Number
Type Ins. AWG Cndr. area all diam. wt. per radius
@ strands
and Size mils. Size C/M in 1000 ft. of bend
40°C 50°C per Cond.
in. cm Alum. Brz. inches
(single bank)
SXIA (B) - 4 30 36 32 7 14 4,107 .30 .76 48 78 2.4
SXIA (B) - 6 30 45 40 7 12 6,530 .33 .83 59 91 2.6
SXIA (B) - 10 30 57 51 7 10 10,380 .35 .89 77 112 2.8
SXIA (B) - 16 45 71 64 7 8 16,510 .41 1.05 111 153 3.3
SXIA (B) - 26 45 92 83 7 6 26,250 .45 1.15 151 198 3.6
SXIA (B) - 41 45 124 111 7 4 41,740 .51 1.29 211 264 4.1
SXIA (B) - 66 45 164 147 7 2 66,370 .57 1.45 302 362 4.6
SXIA (B) - 83 55 189 169 19 1 83,690 .66 1.69 386 453 5.3
SXIA (B) - 106 55 217 195 19 1/0 105,500 .71 1.79 465 537 5.7
SXIA (B) - 133 55 252 226 19 2/0 133,100 .76 1.93 564 641 6.1
SXIA (B) - 168 55 292 261 19 3/0 167,800 .81 2.06 685 768 6.5
SXIA (B) - 212 55 340 305 19 4/0 211,600 .87 2.22 837 930 7.0
SXIA (B) - 250 65 377 337 37 250 250,000 .99 2.51 1018 1125 7.9
SXIA (B) - 300 65 433 387 37 300 300,000 1.04 2.65 1190 1302 8.3
SXIA (B) - 350 65 468 419 37 350 350,000 1.09 2.78 1361 1480 8.8
SXIA (B) - 400 65 513 460 37 400 400,000 1.15 2.91 1534 1657 9.2
SXIA (B) - 500 65 588 526 37 500 500,000 1.23 3.13 1870 2002 9.8
SXIA (B) - 600 80 654 586 61 600 600,000 1.35 3.42 2236 2381 10.8
SXIA (B) - 750 80 759 680 61 750 750,000 1.46 3.71 2735 2891 11.7
SXIA (B) -1000 80 910 815 61 1000 1,000,000 1.62 4.11 3560 3734 13.0

DXIA Two conductor, flameretardant cross-linked polyethylene insulated, flameretardant & *M/R thermoplastic DXIB
jacketed Aluminum (A) or Bronze (B) armored power or control cable
Ambient
Max. over- Approx. net Min.
Temp. Amps Number
Type Ins. AWG Cndr. area all diam. wt. per radius
@ strands
and Size mils. Size C/M in 1000 ft. of bend
40°C 50°C per Cond.
in. cm Alum. Brz. inches
(single bank)
DXIA (B) - 4 30 30 27 7 14 4,107 .44 1.12 90 137 3.5
DXIA (B) - 6 30 38 34 7 12 6,530 .50 1.26 114 166 4.0
DXIA (B) - 10 30 48 43 7 10 10,380 .54 1.37 154 210 4.3
DXIA (B) - 16 45 63 56 7 8 16,510 .70 1.77 244 314 5.6
DXIA (B) - 26 45 83 74 7 6 26,250 .78 1.98 330 409 6.2
DXIA (B) - 41 45 106 95 7 4 41,740 .88 2.25 485 580 7.1
DXIA (B) - 66 45 144 129 7 2 66,370 1.05 2.67 757 871 8.4
DXIA (B) - 83 55 169 151 19 1 83,690 1.18 2.99 923 1050 9.4
DXIA (B) - 106 55 192 172 19 1/0 105,500 1.26 3.21 1132 1267 10.1
DXIA (B) - 133 55 245 219 19 2/0 133,100 1.37 3.47 1315 1462 10.9
DXIA (B) - 168 55 257 230 19 3/0 167,800 1.47 3.74 1608 1765 11.8
DXIA (B) - 212 55 298 267 19 4/0 211,600 1.60 4.06 1938 2109 12.8
DXIA (B) - 250 65 332 297 37 250 250,000 1.75 4.43 2320 2509 14.0
DXIA (B) - 300 65 372 333 37 300 300,000 1.91 4.86 2815 3022 15.3
DXIA (B) - 350 65 406 364 37 350 350,000 2.02 5.13 3213 3432 16.1
DXIA (B) - 400 65 440 394 37 400 400,000 2.12 5.39 3609 3840 17.0
DXIA (B) - 500 65 503 450 37 500 500,000 2.29 5.82 4342 4592 18.3
DXIA (B) - 600 80 566 507 61 600 600,000 2.52 6.41 5283 5560 20.2
DXIA (B) - 750 80 632 567 61 750 750,000 2.75 6.99 6394 6689 22.0

M/R - moisture resistant

L.F. GAUBERT & CO., INC. MARINE INDUSTRIAL CABLE CORP.


700 S. Broad St. - P. O. Box 50500 - New Orleans, LA 70150 New Orleans, Louisiana
Tel: 504-822-7272 • Toll Free: 800-831-7534 Manufacturer of
Fax: 504-821-9309 Navy and Commercial Shipboard Cable
E-mail: sales@gaubertcable.com • www.gaubertcable.com Specialty Cable
0203-03 4/28/06 2:58 PM Page 1

201-06

MARINE INDUSTRIAL CABLE CORP.

COMMERCIAL SHIPBOARD CABLES


5KV
SPEC. #472
CONFORMS TO IEEE STD. 45

Three conductor, flameretardant cross-linked polyethylene


insulated, flameretardant & *M/R thermoplastic jacketed
Aluminum (A) or Bronze (B) armored power or control cable

TXIA Ambient
Temp. Amps
Max. over- Approx. net Min. TXIB
Ins. Strands AWG Cndr. area all diam. wt. per radius
Type @
mils. 40°C 50°C per Cond. Size C/M in 1000 ft. of bend
and Size
in. cm Alum. Brz. inches
(single bank)
TXIA (B) - 4 30 25 23 7 14 4,107 .47 1.19 113 163 3.8
TXIA (B) - 6 30 30 27 7 12 6,530 .52 1.33 146 201 4.2
TXIA (B) - 10 30 40 36 7 10 10,380 .57 1.44 197 257 4.5
TXIA (B) - 16 45 50 45 7 8 16,510 .74 1.87 317 391 5.9
TXIA (B) - 26 45 68 61 7 6 26,250 .83 2.10 440 525 6.6
TXIA (B) - 41 45 87 78 7 4 41,740 .98 2.49 655 760 7.9
TXIA (B) - 66 45 117 104 7 2 66,370 1.12 2.84 978 1098 8.9
TXIA (B) - 83 55 138 123 19 1 83,690 1.25 3.19 1202 1337 10.0
TXIA (B) -106 55 158 141 19 1/0 105,500 1.34 3.41 1444 1589 10.8
TXIA (B) -133 55 182 163 19 2/0 133,100 1.46 3.70 1739 1894 11.7
TXIA (B) -168 55 211 189 19 3/0 167,800 1.57 3.99 2162 2330 12.6
TXIA (B) -212 55 244 218 19 4/0 211,600 1.71 4.34 2621 2806 13.7
TXIA (B) -250 65 272 244 37 250 250,000 1.93 4.90 3220 3429 15.4
TXIA (B) -300 65 305 273 37 300 300,000 2.04 5.19 3746 3968 16.3
TXIA (B) -350 65 333 298 37 350 350,000 2.16 5.48 4317 4552 17.2
TXIA (B) -400 65 359 321 37 400 400,000 2.27 5.76 4900 5149 18.2
TXIA (B) -500 65 413 369 37 500 500,000 2.45 6.23 5981 6250 19.6
TXIA (B) -600 80 462 414 61 600 600,000 2.70 6.86 7165 7454 21.6
TXIA (B) -750 80 519 464 61 750 750,000 3.01 7.65 8928 9249 24.1

Four conductor, flameretardant cross-linked polyethylene insulated, flameretardant & *M/R thermoplastic jacketed
Aluminum (A) or Bronze (B) armored, power or control cable

FXIA Ambient
Temp. Amps
Max. over- Approx. net Min. FXIB
Ins. Strands AWG Cndr. area all diam. wt. per radius
Type @
and Size mils. per Cond. Size C/M in 1000 ft. of bend
40°C 50°C
in. cm Alum. Brz. inches
single bank)
FXIA (B) - 4 30 25 23 7 14 4,107 .51 1.30 139 193 4.1
FXIA (B) - 6 30 30 27 7 12 6,530 .55 1.40 180 240 4.4
FXIA (B) - 10 30 40 36 7 10 10,380 .65 1.65 263 329 5.2
FXIA (B) - 16 45 50 45 7 8 16,510 .80 2.04 392 474 6.4
FXIA (B) - 26 45 68 61 7 6 26,250 .91 2.31 551 648 7.2
FXIA (B) - 41 45 87 78 7 4 41,740 1.05 2.67 834 950 8.4
FXIA (B) - 66 45 117 104 7 2 66,370 1.22 3.11 1207 1338 9.8
FXIA (B) - 83 55 138 123 19 1 83,690 1.38 3.50 1556 1702 11.0
FXIA (B) -106 55 158 141 19 1/0 105,500 1.48 3.75 1883 2040 11.8
FXIA (B) -133 55 182 163 19 2/0 133,100 1.61 4.08 2270 2442 12.8
FXIA (B) -168 55 211 189 19 3/0 167,800 1.73 4.40 2767 2954 13.9
FXIA (B) -212 55 244 218 19 4/0 211,600 1.94 4.92 3469 3679 15.5
FXIA (B) -250 65 272 244 37 250 250,000 2.12 5.37 4098 4328 16.9
FXIA (B) -300 65 305 273 37 300 300,000 2.24 5.70 4897 5143 17.9
FXIA (B) -350 65 333 298 37 350 350,000 2.37 6.02 5671 5931 19.0
FXIA (B) -400 65 359 321 37 400 400,000 2.50 6.34 6344 6617 20.0
FXIA (B) -500 65 413 369 37 500 500,000 2.70 6.86 7667 7956 21.6
FXIA (B) -600 80 462 414 61 600 600,000 3.05 7.75 9443 9770 24.4
FXIA (B) -750 80 519 464 61 750 750,000 3.33 8.46 11545 11903 26.7
M/R - moisture resistant

L.F. GAUBERT & CO., INC. MARINE INDUSTRIAL CABLE CORP.


700 S. Broad St. - P. O. Box 50500 - New Orleans, LA 70150 New Orleans, Louisiana
Tel: 504-822-7272 • Toll Free: 800-831-7534 Manufacturer of
Fax: 504-821-9309 Navy and Commercial Shipboard Cable
E-mail: sales@gaubertcable.com • www.gaubertcable.com Specialty Cable
200 4/28/06 3:01 PM Page 1

202-06

DRAKA MOG
FLAME RETARDANT CABLES
RFOU 0.6/1KV - EPR/EPR/TCWB/EVA

Halogen-free, NEK 606 Type: P1


Mud resistant, NEK 606 Type P8

Maximum operating
Conductor temperature :85°C
Operating voltage :0.6/1kV

Standards applied
IEC: 60092-353 &
NEK 606 -Design guidelines
IEC: 60332-3/A -Flame retardance
IEC: 60754-1,2 -Halogen-free properties Core identification:
IEC: 61034-1,2 -Smoke density One core Grey (Off-white)
Two cores Grey (Off-white) - Black
Three cores Grey (Off-white) - Black - Red
Application:
Four cores Grey (Off-white) - Black - Red - Blue
Fixed installation for power, control and lighting,
Five Cores Grey (Off-white) - Black - Red - Blue - Black
in both EX-and safe areas, general purposes.
Above five cores Black numbers on white base
Mud resistant in accordance with NEK 606.
Earth core Yellow/green
CONSTRUCTION
CODE LETTER
Conductor Circular, tinned, stranded copper. (1)
Insulation R EP-rubber. (2)
Bedding F Flame retardant and halogen-free thermoset compound. (3)
PETP-tape. (4)
Armour O Tinned copper wire braid. (5)
PETP-tape. (6)
Outer sheath U Flame retardant, halogen-free and mud resistant thermoset
compound, SHF2. (7)
Marking E.g; “meter” “year” DRAKA NORSK KABEL RFOU 0,6/1kV
P1/P8 3x25/16 mm2 IEC 60332-3/A “CE”
Color Black

Correction factors for different ambient temperatures:


Ambient temp. °C 25 30 35 40 45 50 55 60 65 70 75
Rating factors 1,22 1,17 1,12 1,06 1,00 0,94 0,87 0,79 0,71 0,61 0,5

Installation recommendations:
In accordance with IEC 60092-352

Minimum bending radius Maximum pulling tension Minimum installation


temperature
During installation Fixed installed 50N x total
cross section of -20°C
8 x cable diameter 6 x cable diameter conductors
Gland recommendation:
EX (d) - Glands with seal on both inner and outer sheath.
EX (e) - Glands with seal on outer sheath only.
Draka Distribution Houston Draka Distribution Aberdeen DME Cables FZCO
1610 Greens Road, Suite 200 Plot #3 Peterseat Dr., Peterseat Park PO Box 17159
Houston, TX 77032 U.S.A. Altens Industrial Estate RA8/ZB3
Aberdeen AB12 3HT U.K. Jebel Ali, Dubai, UAE
World Wide Telephone: 866.539.2780 Draka Distribution Singapore ECS
Web Site: www.DrakaMOG.com 25 Tuas South Street 1 13330 Maycrest Way
Singapore 638034 Richmond, BC, Canada V6V 2J7
201 4/28/06 3:05 PM Page 1

203-06

DRAKA MOG
FLAME RETARDANT CABLES – RFOU 0.6/1kV
Part No. of Cond. Insulation Diameter Diameter Weight of Resistance Reactance Current Short
No. cores and diam. thickness bedding outer cable at 20°C at 50Hz rating at circuit
cond. area appr. sheath approx. 45°C rating
(mm2) (mmØ) (mm) (mmØ) (mmØ) (kg/km) (ohm/km) (ohm/km) (ampere) 1 sec
(ampere)
800000 1x 16/2,5 5,20 1,0 10,0±1,0 13, 5±1,0 350 1,16 0,116 90 2240
800001 1x 25/4 6,60 1,2 11,5±1,0 15,0±1,0 470 0,734 0,112 120 3500
800002 1x 35/6 7,70 1,2 13,0±1,0 16,5±1,0 640 0,529 0,106 145 4900
800003 1x 50/6 9,00 1,4 15,0±1,0 19,0±1,0 820 0,391 0,103 180 7000
800004 1x 70/6 10,90 1,4 17,0±1,0 20,5±1,5 1060 0,270 0,100 225 9800
800005 1x 95/10 12,60 1,6 19,0±1,0 23,0±1,5 1360 0,195 0,097 275 13300
800006 1x 120/10 14,20 1,6 20,5±1,5 25,0±1,5 1680 0,154 0,094 320 16800
800007 1x 150/10 15,90 1,8 23,0±1,5 27,0±1,5 2010 0,126 0,092 365 21000
800008 1x 185/10 17,70 2,0 25,0±1,5 29,5±1,5 2430 0,100 0,091 415 25900
800009 1x 240/16 20,15 2,2 28,0±1,5 32,5±2,0 3090 0,0762 0,090 490 33600
800010* 1x 300/16 22,60 2,4 30,5±2,0 36,0±2,0 3790 0,0607 0,089 560 42000
800015* 2x 1,5/4 1,60 1,0 10,0±1,0 13,0±1,0 260 12,2 0,110 17 210
800029* 2x 2,5/4 2,00 1,0 10,5±1,0 14,0±1,0 300 7,56 0,103 24 350
800045* 2x 4/6 2,55 1,0 12,0±1,0 15,5±1,0 400 4,70 0,096 32 560
800051* 2x 6/6 3,15 1,0 13,0±1,0 16,5±1,0 490 3,11 0,090 41 840
800057 2x 10/10 4,05 1,0 15,0±1,0 18,5±1,0 640 1,84 0,084 57 1400
800063 2x 16/16 5,15 1,0 17,0±1,0 21,5±1,5 910 1,16 0,080 77 2240
800018* 3x 1,5/4 1,60 1,0 10,5±1,0 13,5±1,0 290 12,2 0,110 14 210
800032* 3x 2,5/6 2,00 1,0 11,5±1,0 15,0±1,0 370 7,56 0,103 20 350
800046* 3x 4/6 2,55 1,0 12,5±1,0 16,0±1,0 460 4,70 0,096 27 560
800052* 3x 6/6 3,15 1,0 14,0±1,0 17,5±1,0 570 3,11 0,090 34 840
800058* 3x 10/10 4,05 1,0 16,0±1,0 19,5±1,0 740 1,84 0,084 47 1400
800064* 3x 16/16 5,15 1,0 18,0±1,0 22,5±1,5 1070 1,16 0,080 63 2240
800070* 3x 25/16 6,40 1,2 22,0±1,5 26,5±1,5 1520 0,734 0,079 84 3500
800076* 3x 35/16 7,65 1,2 24,5±1,5 29,0±1,5 1880 0,529 0,076 100 4900
800082* 3x 50/25 9,00 1,4 29,0±1,5 34,0±2,0 2630 0,391 0,076 125 7000
800088* 3x 70/35 10,85 1,4 33,0±2,0 39,0±2,0 3540 0,270 0,075 160 9800
800095* 3x 95/50 12,60 1,6 37,5±2,0 43,5±2,5 4660 0,195 0,073 195 13300
800101* 3x 120/60 14,20 1,6 41,0±2,5 48,0±2,5 5740 0,154 0,072 225 16800
- 3x 150/70* 15,90 1,8 45,0±2,5 54,0±3,0 7450 0,126 0,072 255 21000
- 3x 185/95* 16,80 2,0 52,0±2,5 62,5±3,5 9600 0,100 0,072 290 25900
800019* 4x 1,5/4 1,60 1,0 11,5±1,0 15,0±1,0 360 12,2 0,110 14 210
800035* 4x 2,5/6 2,00 1,0 12,5±1,0 16,0±1,0 440 7,56 0,103 20 350
800047 4x 4/6 2,55 1,0 13,5±1,0 17,5±1,0 540 4,70 0,096 27 560
800053 4x 6/6 3,15 1,0 15,0±1,0 19,0±1,0 670 3,11 0,090 34 840
800059 4x 10/10 4,05 1,0 17,5±1,0 21,5±1,5 900 1,84 0,084 47 1400
800065 4x 16/16 5,15 1,0 20,0±1,5 25,0±1,5 1330 1,16 0,080 63 2240
800071* 4x 25/16 6,40 1,2 24,0±1,5 29,0±1,5 1800 0,734 0,079 84 3500
800077 4x 35/16 7,65 1,2 27,5±1,5 32,0±2,0 2340 0,529 0,076 100 4900
800083* 4x 50/25 9,00 1,4 32,0±2,5 37,5±2,0 3210 0,391 0,076 125 7000
800089 4x 70/35 10,85 1,4 36,5±2,0 43,0±2,5 4360 0,270 0,075 160 9800
800096* 4x 95/50 12,60 1,6 41,5±2,5 48,0±2,5 5750 0,195 0,073 195 13300
- 4x 185/95* 16,80 2,0 55,0±2,5 66,5±3,5 11250 0,100 0,072 290 25900
800020 5x 1,5/6 1,60 1,0 12,5±1,0 16,0±1,0 430 12,2 0,110 12 210
800021* 7x 1,5/6 1,60 1,0 13,5±1,0 17,0±1,0 490 12,2 0,110 10 210
800037 7x 2,5/6 2,00 1,0 14,5±1,0 18,5±1,0 610 7,56 0,103 15 350
800022* 12x 1,5/10 1,60 1,0 18,0±1,0 22,0±1,5 720 12,2 0,110 9 210
800038 12x 2,5/10 2,00 1,0 19,5±1,0 24,0±1,5 910 7,56 0,103 12 350
800023 19x 1,5/10 1,60 1,0 21,0+1,5 25,5±1.5 990 12,2 0,110 8 210
800039 19x 2,5/10 2,00 1,0 23,0±1,5 27,5±1,5 1260 7,56 0,103 11 350
800024 27x 1,5/10 1,60 1,0 25,0±1,5 30,0±2,0 1320 12,2 0,110 6,5 210
800040 27x 2,5/16 2,00 1,0 27,5±1,5 32,5±2,0 1680 7,56 0,103 9 350
800025 37x 1,5/16 1,60 1,0 28,0±1,5 33,0±2,0 1670 12,2 0,110 6 210
800041 37x 2,5/16 2,00 1,0 31,5±2,0 36,5±2,0 2190 7,56 0,103 8 350

*These cables have a double braid (two layers of wires)

Draka Distribution Houston Draka Distribution Aberdeen DME Cables FZCO


1610 Greens Road, Suite 200 Plot #3 Peterseat Dr., Peterseat Park PO Box 17159
Houston, TX 77032 U.S.A. Altens Industrial Estate RA8/ZB3
Aberdeen AB12 3HT U.K. Jebel Ali, Dubai, UAE
World Wide Telephone: 866.539.2780 Draka Distribution Singapore ECS
Web Site: www.DrakaMOG.com 25 Tuas South Street 1 13330 Maycrest Way
Singapore 638034 Richmond, BC, Canada V6V 2J7
202 4/28/06 3:06 PM Page 1

204-06

DRAKA MOG
FIRE RESISTANT CABLES
BFOU 0.6/1KV - MGT/EPR/EPR/TCWB/EVA

Halogen-free, NEK 606 Type: P5


Mud resistant, NEK 606 Type P12

Maximum operating
Conductor temperature :85°C
Operating voltage :0.6/1kV

Standards applied
IEC: 60092-353 &
NEK 606 -Design guidelines
IEC: 60332-3/A -Flame retardance
IEC: 60331 -Fire resistant Core identification:
IEC: 60754-1,2 -Halogen-free properties One core Grey (Off-white)
IEC: 61034-1,2 -Smoke density Two cores Grey (Off-white) - Black
Three cores Grey (Off-white) - Black - Red
Application: Four cores Grey (Off-white) - Black - Red - Blue
Fixed installation for power, control and lighting, Five Cores Grey (Off-white) - Black - Red - Blue - Black
in both EX-and safe areas, emergency and Above five cores Black numbers on white base
critical systems. Earth core Yellow/green

CONSTRUCTION
CODE LETTER
Conductor Circular, tinned, stranded copper. (1)
Insulation B Mica tape. (2) / EP-rubber. (3)
Bedding F Flame retardant and halogen-free thermoplastic compound. (4)
PETP-tape. (5)
Armour O Tinned copper wire braid. (6)
PETP-tape. (7)
Outer sheath U Flame retardant, halogen-free and mud resistant thermoset
compound, SHF 2. (8)
Marking E.g; “meter” “year” DRAKA NORSK KABEL BFOU 0,6/1kV
P5/P12 3x25/16 mm2 FLEX-FLAME IEC 60331
IEC 60332-3/A “CE”
Color Black

Correction factors for different ambient temperatures:


Ambient temp. °C 25 30 35 40 45 50 55 60 65 70 75
Rating factors 1,22 1,17 1,12 1,06 1,00 0,94 0,87 0,79 0,71 0,61 0,5

Installation recommendations:
In accordance with IEC 60092-352

Minimum bending radius Maximum pulling tension Minimum installation


temperature
During installation Fixed installed 50N x total
cross section of -20°C
8 x cable diameter 6 x cable diameter conductors
Gland recommendation for fire resistant cables:
EX (d) - Flameproof barrier glands with inner compound packing and seal on outer sheath.
EX (e) - Glands with seal on outer sheath only.
Draka Distribution Houston Draka Distribution Aberdeen DME Cables FZCO
1610 Greens Road, Suite 200 Plot #3 Peterseat Dr., Peterseat Park PO Box 17159
Houston, TX 77032 U.S.A. Altens Industrial Estate RA8/ZB3
Aberdeen AB12 3HT U.K. Jebel Ali, Dubai, UAE
World Wide Telephone: 866.539.2780 Draka Distribution Singapore ECS
Web Site: www.DrakaMOG.com 25 Tuas South Street 1 13330 Maycrest Way
Singapore 638034 Richmond, BC, Canada V6V 2J7
203 4/28/06 3:07 PM Page 1

205-06

DRAKA MOG
* Double braid (two layers of wires)
FIRE RESISTANT CABLES – BFOU 0.6/1kV
Part No. of Cond. Insulation Diameter Diameter Weight of Resistance Reactance Current Short circuit
No. cores and diam. thickness bedding outer cable at 20°C at 50Hz rating at rating
cond. area appr. sheath approx. 45°C
(mm2) (mmØ) (mm) (mmØ) (mmØ) (kg/km) (ohm/km) (ohm/km) (ampere) (ampere)
800200 1x 16/2,5 5,20 1,0 10,5±1,0 13, 5±1,0 360 1,16 0,120 90 2240
800201 1x 25/4 6,60 1,2 12,0±1,0 15,0±1,0 480 0,734 0,113 120 3500
800202 1x 35/6 7,70 1,2 13,5±1,0 17,0±1,0 650 0,529 0,107 145 4900
800203* 1x 50/6 9,00 1,4 15,5±1,0 19,0±1,0 830 0,391 0,104 180 7000
800204 1x 70/6 10,90 1,4 17,0±1,0 21,0±1,5 1070 0,270 0,101 225 9800
800205 1x 95/10 12,60 1,6 19,0±1,0 23,5±1,5 1380 0,195 0,098 275 13300
800206 1x 120/10 14,20 1,6 21,0±1,5 25,5±1,5 1700 0,154 0,094 320 16800
800207 1x 150/10 15,90 1,8 23,5±1,5 27,5±1,5 2030 0,126 0,094 365 21000
800208 1x 185/10 17,70 2,0 25,5±1,5 30,0±2,0 2470 0,100 0,091 415 25900
800209 1x 240/16 20,15 2,2 28,5±1,5 33,0±2,0 3130 0,0762 0,091 490 33600
800210 1x 300/16 22,60 2,4 31,0±2,0 36,5±2,0 3820 0,0607 0,089 560 42000
800215* 2x 1,5/4 1,60 1,0 10,5±1,0 13,5±1,0 280 12,2 0,115 17 210
800229* 2x 2,5/4 2,00 1,0 11,5±1,0 14,5±1,0 320 7,56 0,107 24 350
800245* 2x 4/6 2,55 1,0 12,5±1,0 16,0±1,0 420 4,70 0,100 32 560
800251* 2x 6/6 3,15 1,0 13,5±1,0 17,5±1,0 510 3,11 0,094 41 840
800257 2x 10/10 4,05 1,0 15,5±1,0 19,5±1,0 680 1,84 0,088 57 1400
800263 2x 16/16 5,15 1,0 17,5±1,0 22,5±1,5 960 1,16 0,082 77 2240
800218* 3x 1,5/4 1,60 1,0 11,0±1,0 14,5±1,0 310 12,2 0,115 14 210
800232* 3x 2,5/6 2,00 1,0 12,0±1,0 15,5±1,0 400 7,56 0,107 20 350
800246* 3x 4/6 2,55 1,0 13,5±1,0 17,0±1,0 500 4,70 0,100 27 560
800252* 3x 6/6 3,15 1,0 14,5±1,0 18,5±1,0 590 3,11 0,094 34 840
800258* 3x 10/10 4,05 1,0 16,5±1,0 20,5±1,5 780 1,84 0,088 47 1400
800264* 3x 16/16 5,15 1,0 19,0±1,0 23,5±1,5 1130 1,16 0,082 63 2240
800270* 3x 25/16 6,40 1,2 22,5±1,5 27,0±1,5 1510 0,734 0,081 84 3500
800276* 3x 35/16 7,65 1,2 25,5±1,5 30,0±2,0 1930 0,529 0,078 100 4900
800282* 3x 50/25 9,00 1,4 29,5±1,5 34,5±2,0 2640 0,391 0,078 125 7000
800288* 3x 70/35 10,85 1,4 34,5±2,0 40,5±2,5 3630 0,270 0,077 160 9800
800295* 3x 95/50 12,60 1,6 38,0±2,0 44,5±2,5 4720 0,195 0,075 195 13300
800301 3x 120/60 14,20 1,6 41,5±2,5 48,5±2,5 5820 0,154 0,073 225 16800
800302 3x 150/70* 15,90 1,8 46,5±2,5 54,5±3,0 7210 0,126 0,073 255 21000
- 3x 185/95* 16,80 2,0 52,0±3,0 61,5±3,5 9400 0,100 0,073 290 25900
- 3x 1,5 + E 1,60 1,0 12,0±1,0 16,0±1,0 390 12,2 0,115 14 210
800233 3x 2,5 + E 2,00 1,0 13,0±1,0 17,0±1,0 470 7,56 0,107 20 350
800243 3x 4 + E 2,55 1,0 14,5±1,0 18,5±1,0 580 4,70 0,100 27 560
800255 3x 6 + E 3,15 1,0 16,0±1,0 20,0±1,5 700 3,11 0,094 34 840
800261 3x 10 + E 4,05 1,0 18,0±1,0 22,5±1,0 930 1,84 0,088 47 1400
800266 3x 16 + E 5,15 1,0 21,0±1,5 25,0±1,5 1350 1,16 0,082 63 2240
800272 3x 25 + E 6,40 1,2 25,0±1,5 29,5±1,5 1850 0,734 0,081 84 3500
800279 3x 35 + E 7,65 1,2 28,0±1,5 33,0±2,0 2370 0,529 0,078 100 4900
- 3x 50 + E 9,00 1,4 33,0±2,0 38,5±2,0 3280 0,391 0,078 125 7000
800290 3x 70 + E 10,85 1,4 37,0±2,0 43,0±2,5 4340 0,270 0,077 160 9800
800297 3x 95 + E 12,60 1,6 42,5±2,5 48,5±2,5 5700 0,195 0,075 195 13300
800306 3x 120 + E 14,20 1,6 46,0±2,5 52,5±3,0 7000 0,154 0,073 225 16800
800219* 4x 1,5/6 1,60 1,0 12,0±1,0 16,0±1,0 390 12,2 0,115 14 210
800235* 4x 2,5/6 2,00 1,0 13,0±1,0 17,0±1,0 470 7,56 0,107 20 350
800247 4x 4/6 2,55 1,0 14,5±1,0 18,5±1,0 580 4,70 0,100 27 560
800253 4x 6/6 3,15 1,0 16,0±1,0 20,0±1,5 700 3,11 0,094 34 840
800259 4x 10/10 4,05 1,0 18,0±1,0 22,5±1,0 930 1,84 0,088 47 1400
800265 4x 16/16 5,15 1,0 21,0+1,5 26,0±1,5 1370 1,16 0,082 63 2240
800271* 4x 25/16 6,40 1,2 25,0±1,5 29,5±1,5 1850 0,734 0,081 84 3500
800277 4x 35/16 7,65 1,2 28,0±1,5 33,0±2,0 2370 0,529 0,078 100 4900
800283* 4x 50/25 9,00 1,4 33,0±2,0 38,5±2,0 3280 0,391 0,078 125 7000
800289 4x 70/35 10,85 1,4 37,0±2,0 43,5±2,5 4390 0,270 0,077 160 9800
800296 4x 95/50 12,60 1,6 42,5±2,5 49,0±2,5 5830 0,195 0,075 195 13300
800304 4x 120/60 14,20 1,6 46,0±2,5 53,5±3,0 7180 0,154 0,073 225 16800
- 4x 185/95* 16,80 2,0 58,0±3,0 68,5±3,5 12000 0,100 0,073 290 25900
800220 5x 1,5/6 1,60 1,0 13,0±1,0 17,0±1,0 460 12,2 0,115 12 210
800221* 7x 1,5/6 1,60 1,0 14,5±1,0 18,0±1,0 520 12,2 0,115 10 210
800237* 7x 2,5/6 2,00 1,0 15,5±1,0 19,5±1,0 650 7,56 0,107 15 350
800222* 12x 1,5/10 1,60 1,0 19,0±1,0 23,0±1,5 780 12,2 0,115 9 210
800238 12x 2,5/10 2,00 1,0 21,0±1,5 25,0±1,5 980 7,56 0,107 12 350
800223* 19x 1,5/10 1,60 1,0 22,5±1,5 27,0±1,5 1080 12,2 0,115 8 210
800239 19x 2,5/10 2,00 1,0 24,5±1,5 29,0±1,5 1350 7,56 0,107 11 350
800224 27x 1,5/10 1,60 1,0 27,0±1,5 31,5±2,0 1440 12,2 0,115 6,5 210
800240 27x 2,5/16 2,00 1,0 29,5±1,5 34,5±2,0 1810 7,56 0,107 9 350
800225 37x 1,5/16 1,60 1,0 30,5±2,0 35,5±2,0 1840 12,2 0,115 6 210
800241 37x 2,5/16 2,00 1,0 33,5±2,0 39,0±2,0 2370 7,56 0,107 8 350

Draka Distribution Houston Draka Distribution Aberdeen DME Cables FZCO


1610 Greens Road, Suite 200 Plot #3 Peterseat Dr., Peterseat Park PO Box 17159
Houston, TX 77032 U.S.A. Altens Industrial Estate RA8/ZB3
Aberdeen AB12 3HT U.K. Jebel Ali, Dubai, UAE
World Wide Telephone: 866.539.2780 Draka Distribution Singapore ECS
Web Site: www.DrakaMOG.com 25 Tuas South Street 1 13330 Maycrest Way
Singapore 638034 Richmond, BC, Canada V6V 2J7
204 4/28/06 3:08 PM Page 1

206-06

DRAKA MOG
SHIPBOARD CABLE
One- and Two-Conductor, Medium Voltage, 600 Volts

Stranded, bare copper conductors with color-coded Type X (crosslinked polyethylene) insulation cabled with fillers and
covered with a polyester binder tape and a moisture-resistant PVC jacket.

EACH CONDUCTOR UNARMORED ARMORED


I.E.E.E. 45 SHIPBOARD CABLE:
IEEE 45 Maximum SXIU SXIA or SXIB SXIA SXIB
SINGLE CONDUCTOR, 600 VOLTS Type Nominal Amps Nominal Approx. Nominal Approx. Approx.
& AWG Size Diameter per cond. Diameter Weight Diameter Weight Weight
CROSSLINKED POLYETHYLENE INSULATION
Size (Strands) (in.) (45°C) (in.) (lb./Mft.) (in.) (lb./Mft.) (lb./Mft.)
POLYVINYLCHLORIDE (PVC) JACKET SXIU/A/B-4 14 (7x) 0.073 34 0.230 37 0.280 80 100
SXIU/A/B-6 12 (7x) 0.092 43 0.250 47 0.300 95 110
SXIU/A/B-10 10 (7x) 0.116 54 0.275 63 0.325 135 160
PVC Jacket SXIU/A/B-16 8 (7x) 0.146 68 0.340 98 0.390 155 180
Conductor

SXIU/A/B-26 6 (7x) 0.184 88 0.380 136 0.430 205 240


SXIU/A/B-41 4 (7x) 0.232 118 0.430 195 0.480 280 330
Type X Insulation Optional SXIU/A/B-66 2 (7x) 0.292 156 0.490 285 0.540 370 420
Braided Armor SXIU/A/B-83 1 (19x) 0.332 180 0.580 374 0.630 465 525
(aluminum or bronze)
SXIU/A/B-106 1/0 (19x) 0.373 207 0.625 453 0.675 550 625
SXIU/A/B-133 2/0 (19x) 0.418 240 0.670 538 0.720 650 730
Type SXIU – Unarmored SXIU/A/B-168 3/0 (19x) 0.470 278 0.725 674 0.775 795 875
Type SXIA – Aluminum basket SXIU/A/B-212 4/0 (37x) 0.528 324 0.785 811 0.835 925 1010

weave armored SXIU/A/B-250 250 (37x) 0.575 359 0.890 990 0.940 1130 1250
SXIU/A/B-350 350 (37x) 0.681 446 1.000 1334 1.050 1495 1605
Type SXIB – Bronze basket SXIU/A/B-500 500 (37x) 0.814 560 1.140 1842 1.190 2000 2130
weave armored SXIU/A/B-750 750 (61x) 0.998 723 1.340 2708 1.390 2920 3060

The values for maximum amps are for 90°C conductor and 45°C ambient temperatures.
All cables listed above pass the IEEE 45 flame test and meet the requirements of tables A10, A11 and A12.
These same cable constructions are also used as cable cores for armored constructions.

I.E.E.E. 45 SHIPBOARD CABLE: EACH CONDUCTOR UNARMORED ARMORED


IEEE 45 Maximum DXIU DXIA or DXIB DXIA DXIB
TWO CONDUCTOR, 600 VOLTS Type Nominal Amps Nominal Approx. Nominal Approx. Approx.
CROSSLINKED POLYETHYLENE (XHHW) & AWG Size Diameter per cond. Diameter Weight Diameter Weight Weight
INSULATION Size (Strands) (in.) (45°C) (in.) (lb./Mft.) (in.) (lb./Mft.) (lb./Mft.)
POLYVINYLCHLORIDE (PVC) JACKET DXIU/A/B-4 14 (7x) 0.073 29 0.380 77 0.430 145 185
DXIU/A/B-6 12 (7x) 0.092 36 0.420 100 0.470 165 210
DXIU/A/B-10 10 (7x) 0.116 46 0.470 153 0.520 240 295
Conductor PVC Jacket DXIU/A/B-16 8 (7x) 0.146 60 0.630 225 0.680 335 385
Filler

DXIU/A/B-26 6 (7x) 0.184 79 0.710 315 0.760 470 550


DXIU/A/B-41 4 (7x) 0.232 101 0.810 436 0.860 625 705
Polyester Tape DXIU/A/B-66 2 (7x) 0.292 137 0.980 671 1.030 780 875
Type X Insulation Optional
Braided Armor DXIU/A/B-83 1 (19x) 0.332 161 1.110 842 1.160 885 985
(aluminum or bronze)
DXIU/A/B-106 1/0 (19x) 0.373 183 1.190 1010 1.240 1095 1215
DXIU/A/B-133 2/0 (19x) 0.418 233 1.290 1223 1.340 1445 1580
Type DXIU – Unarmored DXIU/A/B-168 3/0 (19x) 0.470 245 1.400 1504 1.450 1759 1895
Type DXIA – Aluminum basket DXIU/A/B-212 4/0 (19x) 0.528 284 1.520 1803 1.570 2065 2215

weave armored DXIU/A/B-250 250 (37x) 0.575 316 1.650 2117 1.700 2565 2725
DXIU/A/B-350 350 (37x) 0.681 387 1.940 2971 1.990 3300 3500
Type DXIB – Bronze basket DXIU/A/B-500 500 (37x) 0.814 479 2.220 4067 2.270 4460 4670
weave armored DXIU/A/B-750 750 (61x) 0.998 602 2.630 5916 2.680 6445 6785
The values for maximum amps are for 90°C conductor and 45°C ambient temperatures.
All cables listed above pass the IEEE 45 flame test and meet the requirements of tables A10, A11 and A12.
These same cable constructions are also used as cable cores for armored constructions.

Draka Distribution Houston Draka Distribution Aberdeen DME Cables FZCO


1610 Greens Road, Suite 200 Plot #3 Peterseat Dr., Peterseat Park PO Box 17159
Houston, TX 77032 U.S.A. Altens Industrial Estate RA8/ZB3
Aberdeen AB12 3HT U.K. Jebel Ali, Dubai, UAE
World Wide Telephone: 866.539.2780 Draka Distribution Singapore ECS
Web Site: www.DrakaMOG.com 25 Tuas South Street 1 13330 Maycrest Way
Singapore 638034 Richmond, BC, Canada V6V 2J7
205 4/28/06 3:08 PM Page 1

207-06

DRAKA MOG

SHIPBOARD CABLE
Three- and Four-Conductor, Medium Voltage, 600 Volts

Stranded, bare copper conductors with color-coded Type X (crosslinked polyethylene) insulation cabled with fillers and
covered with a polyester binder tape and a moisture-resistant PVC jacket.

EACH CONDUCTOR UNARMORED ARMORED


I.E.E.E. 45 SHIPBOARD CABLE: IEEE 45 Maximum TXIU TXIA or TXIB TXIA TXIB
THREE CONDUCTOR, 600 VOLTS Type Nominal Amps Nominal Approx. Nominal Approx. Approx.
& AWG Size Diameter per cond. Diameter Weight Diameter Weight Weight
CROSSLINKED POLYETHYLENE (XHHW) INSULATION Size (Strands) (in.) (45°C) (in.) (lb./Mft.) (in.) (lb./Mft.) (lb./Mft.)
POLYVINYLCHLORIDE (PVC) JACKET
TXIU/A/B-4 14 (7x) 0.073 24 0.400 98 0.450 175 210
TXIU/A/B-6 12 (7x) 0.092 29 0.450 130 0.500 230 265
Conductor Filler PVC Jacket TXIU/A/B-10 10 (7x) 0.116 38 0.500 178 0.550 300 340
TXIU/A/B-16 8 (7x) 0.146 48 0.670 300 0.720 420 480

TXIU/A/B-26 6 (7x) 0.184 65 0.750 419 0.800 610 665


Polyester Tape TXIU/A/B-41 4 (7x) 0.232 83 0.900 641 0.950 840 905
Type X Insulation Optional Braided
Armor TXIU/A/B-66 2 (7x) 0.292 111 1.040 925 1.090 1130 1210
(aluminum or bronze) TXIU/A/B-83 1 (19x) 0.332 131 1.180 1145 1.230 1400 1498

Type TXIU – Unarmored TXIU/A/B-106 1/0 (19x) 0.373 150 1.270 1401 1.320 1660 1790
TXIU/A/B-133 2/0 (19x) 0.418 173 1.380 1704 1.430 1820 1960
Type TXIA – Aluminum basket TXIU/A/B-168 3/0 (19x) 0.470 201 1.490 2085 1.540 2180 2330
weave armored TXIU/A/B-212 4/0 (19x) 0.528 232 1.630 2524 1.680 2540 2710
Type TXIB – Bronze basket TXIU/A/B-250 250 (37x) 0.575 259 1.830 3139 1.880 3340 3530
weave armored TXIU/A/B-350 350 (37x) 0.681 317 2.080 4166 2.130 4540 4750
TXIU/A/B-500 500 (37x) 0.814 393 2.370 5846 2.420 6160 6410
TXIU/A/B-750 750 (61x) 0.998 494 2.810 8776 2.860 9190 9490

The values for maximum amps are for 90°C conductor and 45°C ambient temperatures.
All cables listed above pass the IEEE 45 flame test and meet the requirements of tables A10, A11 and A12.
These same cable constructions are also used as cable cores for armored constructions.

EACH CONDUCTOR UNARMORED ARMORED


IEEE 45 Maximum FXIU FXIA or FXIB FXIA FXIB
I.E.E.E. 45 SHIPBOARD CABLE: Type Nominal Amps Nominal Approx. Nominal Approx. Approx.
FOUR CONDUCTOR, 600 VOLTS & AWG Size Diameter per cond. Diameter Weight Diameter Weight Weight
CROSSLINKED POLYETHYLENE (XHHW) INSULATION Size (Strands) (in.) (45°C) (in.) (lb./Mft.) (in.) (lb./Mft.) (lb./Mft.)
POLYVINYLCHLORIDE (PVC) JACKET FXIU/A/B-4 14 (7x) 0.073 24 0.440 120 0.490 200 250
FXIU/A/B-6 12 (7x) 0.092 29 0.490 163 0.540 260 315
FXIU/A/B-10 10 (7x) 0.116 38 0.580 243 0.630 325 385
Conductor PVC Jacket
Filler FXIU/A/B-16 8 (7x) 0.146 48 0.730 370 0.780 505 590

FXIU/A/B-26 6 (7x) 0.184 65 0.830 522 0.880 705 795


FXIU/A/B-41 4 (7x) 0.232 83 0.990 808 1.040 990 1110
Polyester Tape FXIU/A/B-66 2 (7x) 0.292 111 1.140 1171 1.190 1350 1470
Type X Insulation Optional Braided
FXIU/A/B-83 1 (19x) 0.332 131 1.300 1491 1.350 1720 1850
Armor
(aluminum or bronze)
FXIU/A/B-106 1/0 (19x) 0.373 150 1.400 1797 1.450 2060 2220
Type FXIU – Unarmored FXIU/A/B-133 2/0 (19x) 0.418 173 1.520 2201 1.570 2430 2605
FXIU/A/B-168 3/0 (19x) 0.470 201 1.650 2707 1.700 3140 3330
Type FXIA – Aluminum basket FXIU/A/B-212 4/0 (19x) 0.528 232 1.860 3427 1.910 3770 3980
weave armored
FXIU/A/B-250 250 (37x) 0.575 259 2.025 3974 2.075 4630 4875
Type FXIB – Bronze basket FXIU/A/B-350 350 (37x) 0.681 317 2.290 5476 2.340 5820 6130
weave armored FXIU/A/B-500 500 (37x) 0.814 393 2.630 7438 2.680 8120 8400

The values for maximum amps are for 90°C conductor and 45°C ambient temperatures.
All cables listed above pass the IEEE 45 flame test and meet the requirements of tables A10, A11 and A12.
These same cable constructions are also used as cable cores for armored constructions.

Draka Distribution Houston Draka Distribution Aberdeen DME Cables FZCO


1610 Greens Road, Suite 200 Plot #3 Peterseat Dr., Peterseat Park PO Box 17159
Houston, TX 77032 U.S.A. Altens Industrial Estate RA8/ZB3
Aberdeen AB12 3HT U.K. Jebel Ali, Dubai, UAE
World Wide Telephone: 866.539.2780 Draka Distribution Singapore ECS
Web Site: www.DrakaMOG.com 25 Tuas South Street 1 13330 Maycrest Way
Singapore 638034 Richmond, BC, Canada V6V 2J7
206 4/28/06 3:09 PM Page 1

208-06

DRAKA MOG

OFFSHORE CABLE
One & Two Conductor, Medium Voltage, 600 Volts
Soft annealed tinned copper conductors, Type P chemically crosslinked polyolefin (XLPO) insulation meeting
specification IEEE 1580 covered with a jacket of flame retardant Arctic Neoprene.

1/C POWER
Insulation
IEEE 1580 Offshore Cable: IEEE-45 Conductor Size Wall Thickness Cable Diameter Approx. Weight
One Conductor, 600 Volts Cable Type AWG/MCM mm2 Stranding Inches mm Inches mm Lbs/M kg/km
Crosslinked Polyolefin (Type P) Insulation SP-18 18 0.96 19/30 .030 .76 .115 2.92 11 16
SP-16 16 1.23 19/29 .030 .76 .120 3.05 13 19
Neoprene Jacket SP-14 14 1.94 19/27 .030 .76 .135 3.43 18 27
SP-12 12 3.08 19/25 .030 .76 .150 3.81 26 39
SP-10 10 5.53 27/24 .030 .76 .185 4.70 44 65
SP-8 8 7.57 37/24 .045 1.14 .235 5.97 64 96
SP-6 6 12.5 61/24 .045 1.14 .295 7.49 100 149
SP-5 5 18.6 91/24 .045 1.14 .335 8.51 145 216
SP-4 4 21.5 105/24 .045 1.14 .355 9.02 170 253
SP-3 3 25.6 125/24 .045 1.14 .380 9.65 200 298
SP-2 2 30.7 150/24 .045 1.14 .410 10.41 230 342
SP-1 1 46.0 225/24 .055 1.40 .495 12.57 350 521
SP-1/0 1/0 56.3 275/24 .055 1.40 .550 13.97 420 625
SP-2/0 2/0 66.5 325/24 .055 1.40 .565 14.35 480 714
SP-3/0 3/0 92.1 450/24 .055 1.40 .670 17.02 670 997
SP-4/0 4/0 112.6 550/24 .055 1.40 .720 18.29 815 1213
SP-262 262 133.0 650/24 .065 1.65 .790 20.07 965 1437
Available in: SP-313 313 158.6 775/24 .065 1.65 .860 21.84 1135 1690
• Unarmored SP-373 373 189.3 925/24 .065 1.65 .930 23.62 1345 2002
SP-444 444 225.1 1100/24 .065 1.65 1.000 25.54 1600 2382
• Armored SP-535 535 271.2 1325/24 .080 2.03 1.110 28.20 1935 2880
• Armored & Sheathed SP-646 646 327.5 1600/24 .080 2.03 1.210 30.73 2300 3423
SP-777 777 393.8 1925/24 .080 2.03 1.300 33.02 2755 4100
SP-1111 1111 562.8 2750/24 .110 2.80 1.570 39.88 3940 5864

IEEE 1580 Offshore Cable:


Two Conductor, 600 Volts
Crosslinked Polyolefin (Type P) Insulation 2/C POWER
Neoprene Jacket Insulation Jacket
IEEE-45 Conductor Size Wall Thickness Wall Thickness Cable Diameter Approx. Weight
Cable Type AWG/MCM mm2 Stranding Inches mm Inches mm Inches mm Lbs/M kg/km
DPN-14 14 1.94 19/27 .030 .76 .060 1.53 .380 9.65 77 115
DPN-12 12 3.08 19/25 .030 .76 .060 1.53 .425 10.80 100 149
DPN-10 10 5.53 27/24 .030 .76 .060 1.53 .490 12.45 115 171
DPN-8 8 7.57 37/24 .045 1.14 .060 1.53 .590 14.99 210 313
DPN-6 6 12.5 61/24 .045 1.14 .060 1.53 .705 17.91 315 469
DPN-5 5 18.6 91/24 .045 1.14 .060 1.53 .810 20.57 440 655
DPN-4 4 21.5 105/24 .045 1.14 .080 2.03 .870 22.10 520 774
DPN-3 3 25.6 125/24 .045 1.14 .080 2.03 .920 23.37 605 900
DPN-2 2 30.7 150/24 .045 1.14 .080 2.03 .985 25.02 685 1019
DPN-1 1 46.0 225/24 .055 1.40 .080 2.03 1.150 29.21 975 1451
DPN-1/0 1/0 56.3 275/24 .055 1.40 .080 2.03 1.260 32.00 1150 1711
Available in: DPN-2/0 2/0 66.5 325/24 .055 1.40 .080 2.03 1.320 33.53 1285 1912
DPN-3/0 3/0 92.1 450/24 .055 1.40 .110 2.80 1.560 39.62 1860 2768
• Unarmored DPN-4/0 4/0 112.6 550/24 .055 1.40 .110 2.80 1.660 42.16 2215 3296
• Armored DPN-262 262 133.0 650/24 .065 1.65 .125 3.18 1.830 46.48 2605 3877
DPN-313 313 158.6 775/24 .065 1.65 .125 3.18 1.965 49.91 3035 4517
• Armored & Sheathed DPN-373 373 189.3 925/24 .065 1.65 .125 3.18 2.105 53.47 3615 5380
DPN-444 444 225.1 1100/24 .065 1.65 .125 3.18 2.245 57.02 4140 6161
DPN-535 535 271.2 1325/24 .080 2.03 .140 3.56 2.495 63.37 4960 7381
DPN-646 646 327.5 1600/24 .080 2.03 .140 3.56 2.695 68.45 5880 8750
DPN-777 777 393.8 1925/24 .080 2.03 .155 3.94 2.900 73.66 7030 10462

Draka Distribution Houston Draka Distribution Aberdeen DME Cables FZCO


1610 Greens Road, Suite 200 Plot #3 Peterseat Dr., Peterseat Park PO Box 17159
Houston, TX 77032 U.S.A. Altens Industrial Estate RA8/ZB3
Aberdeen AB12 3HT U.K. Jebel Ali, Dubai, UAE
World Wide Telephone: 866.539.2780 Draka Distribution Singapore ECS
Web Site: www.DrakaMOG.com 25 Tuas South Street 1 13330 Maycrest Way
Singapore 638034 Richmond, BC, Canada V6V 2J7
207 4/28/06 3:10 PM Page 1

209-06

DRAKA MOG

OFFSHORE CABLE
Three & Four Conductor, Medium Voltage, 600 Volts
Soft annealed tinned copper conductors, Type P chemically crosslinked polyolefin (XLPO) insulation meeting
specification IEEE 1580 covered with a jacket of flame retardant Arctic Neoprene.

IEEE 1580 Offshore Cable: 3/C POWER


Three Conductor, 600 Volts Insulation Jacket
Crosslinked Polyolefin (Type P) Insulation IEEE-45 Conductor Size Wall Thickness Wall Thickness Cable Diameter Approx. Weight
Neoprene Jacket Cable Type AWG/MCM mm2 Stranding Inches mm Inches mm Inches mm Lbs/M kg/km
TPN-14 14 1.94 19/27 .030 .76 .060 1.53 .390 9.91 100 149
TPN-12 12 3.08 19/25 .030 .76 .060 1.53 .440 11.18 135 201
TPN-10 10 5.53 27/24 .030 .76 .060 1.53 .520 13.21 200 298
TPN-8 8 7.57 37/24 .045 1.14 .060 1.53 .625 15.88 275 409
TPN-6 6 12.5 61/24 .045 1.14 .060 1.53 .750 19.05 420 625
TPN-5 5 18.6 91/24 .045 1.14 .080 2.03 .890 22.61 555 826
TPN-4 4 21.5 105/24 .045 1.14 .080 2.03 .925 23.50 695 1034
TPN-3 3 25.6 125/24 .045 1.14 .080 2.03 .975 24.77 805 1198
TPN-2 2 30.7 150/24 .045 1.14 .080 2.03 1.045 26.54 915 1362
TPN-1 1 46.0 225/24 .055 1.40 .080 2.03 1.225 31.12 1320 1964
TPN-1/0 1/0 56.3 275/24 .055 1.40 .080 2.03 1.340 34.04 1610 2395
TPN-2/0 2/0 66.5 325/24 .055 1.40 .110 2.80 1.440 36.58 1885 2805
TPN-3/0 3/0 92.1 450/24 .055 1.40 .110 2.80 1.665 42.29 2560 3810
TPN-4/0 4/0 112.6 550/24 .055 1.40 .125 3.18 1.800 45.72 3060 4555
Available in: TPN-262 262 133.0 650/24 .065 1.65 .125 3.18 1.950 49.53 3555 5290
TPN-313 313 158.6 775/24 .065 1.65 .125 3.18 2.095 53.21 4140 6161
• Unarmored TPN-373 373 189.3 925/24 .065 1.65 .125 3.18 2.245 57.02 4880 7262
• Armored TPN-444 444 225.1 1100/24 .065 1.65 .140 3.56 2.425 61.60 5800 8631
TPN-535 535 271.2 1325/24 .080 2.03 .140 3.56 2.660 67.56 6945 10335
• Armored & Sheathed TPN-646 646 327.5 1600/24 .080 2.03 .155 3.94 2.905 73.79 8185 12181
TPN-777 777 393.8 1925/24 .080 2.03 .155 3.94 3.095 78.61 9695 14428

IEEE 1580 Offshore Cable: 4/C POWER


Four Conductor, 600 Volts Insulation Jacket
Crosslinked Polyolefin (Type P) Insulation IEEE-45 Conductor Size Wall Thickness Wall Thickness Cable Diameter Approx. Weight
Neoprene Jacket Cable Type AWG/MCM mm2 Stranding Inches mm Inches mm Inches mm Lbs/M kg/km
FPN-14 14 1.94 19/27 .030 .76 .060 1.53 .430 10.92 115 171
FPN-12 12 3.08 19/25 .030 .76 .060 1.53 .475 12.07 155 231
FPN-10 10 5.53 27/24 .030 .76 .060 1.53 .565 14.35 240 357
FPN-8 8 7.57 37/24 .045 1.14 .060 1.53 .690 17.53 350 521
FPN-6 6 12.5 61/24 .045 1.14 .060 1.53 .820 20.83 540 804
FPN-5 5 18.6 91/24 .045 1.14 .080 2.03 .980 24.89 775 1153
FPN-4 4 21.5 105/24 .045 1.14 .080 2.03 1.020 25.91 885 1317
FPN-3 3 25.6 125/24 .045 1.14 .080 2.03 1.080 27.43 1025 1525
FPN-2 2 30.7 150/24 .045 1.14 .080 2.03 1.160 29.46 1170 1741
FPN-1 1 46.0 225/24 .055 1.40 .080 2.03 1.360 34.54 1710 2545
FPN-1/0 1/0 56.3 275/24 .055 1.40 .110 2.80 1.510 38.35 2100 3125
FPN-2/0 2/0 66.5 325/24 .055 1.40 .110 2.80 1.590 40.39 2410 3586
FPN-3/0 3/0 92.1 450/24 .055 1.40 .125 3.18 1.875 47.63 3360 5000
FPN-4/0 4/0 112.6 550/24 .055 1.40 .125 3.18 1.995 50.67 3940 5863
Available in: FPN-262 262 133.0 650/24 .065 1.65 .125 3.18 2.165 54.99 4640 6905
FPN-313 313 158.6 775/24 .065 1.65 .140 3.56 2.355 59.82 5475 8148
• Unarmored FPN-373 373 189.3 925/24 .065 1.65 .140 3.56 2.525 64.14 6365 9472
• Armored FPN-444 444 225.1 1100/24 .065 1.65 .140 3.56 2.695 68.45 7500 11161
FPN-535 535 271.2 1325/24 .080 2.03 .155 3.94 2.990 75.95 8970 13349
• Armored & Sheathed FPN-646 646 327.5 1600/24 .080 2.03 .155 3.94 3.230 82.04 10640 15834
FPN-777 777 393.8 1925/24 .080 2.03 .155 3.94 3.445 87.50 12730 18944

Draka Distribution Houston Draka Distribution Aberdeen DME Cables FZCO


1610 Greens Road, Suite 200 Plot #3 Peterseat Dr., Peterseat Park PO Box 17159
Houston, TX 77032 U.S.A. Altens Industrial Estate RA8/ZB3
Aberdeen AB12 3HT U.K. Jebel Ali, Dubai, UAE
World Wide Telephone: 866.539.2780 Draka Distribution Singapore ECS
Web Site: www.DrakaMOG.com 25 Tuas South Street 1 13330 Maycrest Way
Singapore 638034 Richmond, BC, Canada V6V 2J7
Roxtec 208 4/28/06 3:11 PM Page 1

210-06

ROXTEC
CABLE & PIPE TRANSIT SYSTEM COMPONENTS
S Frames SR Frame
Packing space for S Frame
Packing space is the usable area inside each frame for
modules/cables (compression unit excluded).

Model No.
Sq. Rounded X width (mm) Y height (mm)
S-2 — 120 60
S-4 SR-4 120 120
S-6 SR-6 120 180
S-8 SR-8 120 240
S Frame—Basic type for weldings. SR Frames
S frame Materials: Primed mild steel, Acid proof stainless steel, • Designed for use in decks & bulkheads subject to high degrees of stress.
Aluminium. • The frames are reinforced with a banded construction 80 mm wide, with
rounded corners (radius 70 mm).
• The S frame should be welded to the construction. • The SR Frame should be welded to the construction.
• Recommended hole dimension in the construction: • Recommended hole dimension in the construction; external contour
Height: external frame height plus 2– 4 mm (outline?) height/width plus 2-4 mm (according to welding instructions).
Width: external frame width plus 2– 4 mm • Top and bottom reinforcement are also available.

RM Modules
Standard RM Modules RM 40 Special RM Modules RM 20w40
For Cable/pipe External dim. [mm] For Cable/pipe External dim. [mm]
Module type diameter 0/ [mm] (height  width  depth) Module type diameter 0/ [mm] (height  width  depth)
RM 20 0  4-13.5 20  20  60 RM 15 0  3.5-10.5 15  15  60
RM 30 0  10-25 30  30  60 RM 15w40 0  3  3.5-10.5 15  40  60
RM 40 0  22-32.5 40  40  60 RM 20w40 0  2  3.5-14.5 20  40  60
RM 60 0  28-54 60  60  60 RM 40/10-32 0  9.5-32.5 40  40  60
RM 90 0  48-71 90  90  60 RM 60/20-50 0  50-20 60  60  60
RM 120 0  68-99 120  120  60

RM Solid Compensation Modules


Module type External dim. [mm] (height  width  depth)
RM 5w120/0 5  120  60
RM 30/0 RM 10w120/0 10  120  60
RM 5/0  24 5  5  60  24 pcs
RM 10/0  12 10  10  60  12 pcs
RM 10w120/0 RM 15/0 15  15  60
RM 20/0 20  20  60
RM 10/0  12 RM 30/0 30  30  60
RM 40/0 40  40  60
RM 60/0 60  60  60
Wedges The ES and PE RM modules are also available as solid
compensation modules used to fill surplus in the frame.

Compression unit for S, SF, SR, SO, SFO, SK, SBTB, and KFO frames.
Part Components Materials
Wedge 120 Main body part Roxylon rubber
Fittings, bolts Galvanized steel or acid proof stainless steel.

Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
Roxtec 209 4/28/06 3:12 PM Page 1

211-06

ROXTEC
CABLE & PIPE TRANSIT SYSTEM COMPONENTS
R Frames
Sealing Systems for multi-cable and pipe penetrations through round holes.

Packing space* Ext. diam. Rec. hole Ext. depth


Type X  Y [mm] 0/ E [mm] diam. [mm] D [mm] Materials
R-70 40  40 70 70-72 70 Acid proof stainless
R-75 40  40 75 75-77 70 steel
R-100 60  60 100 100-102 70 Hot dip galv. mild steel
R-127 80  80 127 127-129 70 (standard) or acid
R-150 90  90 150 150-153 70 proof stainless fittings
R-200 120  120 200 200-203 70 Roxylon rubber
*Packing space is the usable space inside each frame for modules/cables.

RS Seals
A Circular Sealing System for single cable or pipe penetrations in metal sleeves.

Inner range Ext. diam. Rec. hole Ext. depth


Type 0/ [mm] 0/ [mm] diam. [mm] D [mm] Materials
RS-23 0 3.6-11 23 23-24 38 Stainless
RS-25 0 3.6-12 25 25-26 38 Steel fittings
RS-31 0 4-17 31 31-32 38 Roxylon rubber
RS-43 0 4-23 43 43-44 75
RS-50 0 8-30 50 50-51 75
RS-68 0 26-48 68 68-70 75
RS-75 0 26-48 75 75-77 75
RS-100 0 48-70 100 100-102 85
RS-125 0 68-98 125 125-127 85
RS-150 (no core) 93-119 150 150-152 85

Each seal consists of two halves, and the centre core of the seal is adaptable to fit cables or pipes of a wide range, using MultiDiameter technology.
The RS penetration is sealed by tightening the screws on the front fittings, causing the penetration to compress and subsequently seal the cable or
the pipe.

M63 Cable Gland


Type: Gland M63

External dimension (mm):  73x 42
Packing space* (mm): 40  40
Hole dimension in cabinet
(mm):  63.5-64
Material: Nickelplated brass, PA 6,
galvanized mild steel,
EPDM rubber
Rating: NEMA/UL 50 1, 2, 3, 4, 4X,
12 and 13, IEC 60529 for
IP 54 and IP 66/67
*Packing space is the available space inside each frame
for sealing modules and cables/pipes.

M63 Gland Kits


RG M63/1 RG M63/4 RG M63/9
Accommodates one cable Accommodates up to four Accommodates up to nine
with a diameter range from cables with a diameter cables with a diameter
9.5 to 32.5 millimeters. range from 4 to 14.5 range from 3.5 to 10.5
millimeters. millimeters.

Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
Roxtec 210 4/28/06 3:13 PM Page 1

212-06

ROXTEC

GHM FRAME
CABLE & PIPE TRANSIT SYSTEM COMPONENTS
The GHM frame was
developed for applications
where welding is not suitable.
The flange has a pre-defined
hole pattern adapted to handle
the exposure levels the frame
has been tested for. The
frame is delivered with a TSL
15 x 6 sealing strip. The GHM
frame’s relatively low weight
compared to SF frames
makes it easier to handle
during installation.

Frame Packing External dimensions (D=60 mm) Weight


Frame openings space (mm) H x W (mm) H x W (in) (kg) (lb) Art. No.
GHM 2x1 primed 1 60 x 120 233 x 253 9.173 x 9.961 3.4 7.562 GHM2000000112
GHM 2x2 primed 2 60 x 120 233 x 383 9.173 x 15.079 5.4 11.905 GHM2000000212
GHM 2x3 primed 3 60 x 120 233 x 514 9.173 x 20.236 7.4 16.218 GHM2000000312
GHM 4x1 primed 1 120 x 120 292 x 253 11.496 x 9.961 4.1 9.039 GHM4000000112
GHM 4x2 primed 2 120 x 120 292 x 383 11.496 x 15.079 6.3 13.977 GHM4000000212
GHM 4x3 primed 3 120 x 120 292 x 514 11.496 x 20.236 8.6 18.938 GHM4000000312
GHM 6x1 primed 1 180 x 120 350 x 253 13.780 x 9.961 4.8 10.516 GHM6000000112
GHM 6x2 primed 2 180 x 120 350 x 383 13.780 x 15.079 7.3 16.072 GHM6000000212
GHM 6x1 GHM 6x3 primed 3 180 x 120 350 x 514 13.780 x 20.236 9.8 21.627 GHM6000000312

Pos. (mm) (in.) X(Tx) Y(Sx)


h H -120 H -4.724 X(mm) X(in.) T Y(mm) Y(in.) S
w W -120 W -4.724 GHM 2x1 96.3 3.791 2 86.5 3.406 2
a 60 2.362 GHM 2x2 107.7 4.240 3 86.5 3.406 2
b 6 0.263 GHM 2x3 90.7 3.571 5 86.5 3.406 2
c 6 0.263 GHM 4x1 96.3 3.791 2 115.8 4.559 2
d 3 0.118 GHM 4x2 107.7 4.240 3 115.8 4.559 2
e 10 0.394 GHM 4x3 90.7 3.571 5 115.8 4.559 2
f 30 1.181 GHM 6x1 96.3 3.791 2 96.7 3.807 3
i Ø9 Ø 0.354 GHM 6x2 107.7 4.240 3 96.7 3.807 3
D 60 2.362 GHM 6x3 90.7 3.571 5 96.7 3.807 3

Z = Frame size N = Number of horizontal openings

Height tolerance Width tolerance ±5 mm ±0.197”


± 5 mm ±0.197”
x1 x2 x3 x4 x5 x6 x7 x8 x9 x10
Frame (mm) (in) (mm) / (in)
GHM 2 128 5.039
148 278 409 539 670 800 931 1061 1192 1322
GHM 2 + 2 241 9.488
5.827 10.945 16.102 21.220 26.378 31.496 36.654 41.772 46.929 52.047
GHM 2 + 2 + 2 350 13.780
GHM 4 187 7.362
148 278 409 539 670 800 931 1061 1192 1322
GHM 4 + 4 358 14.094
5.287 10.945 16.102 21.220 26.378 31.496 36.654 41.772 46.929 52.047
GHM 4 + 4 + 4 530 20.866
GHM 6 245 9.646
148 278 409 539 670 800 931 1061 1192 1322
GHM 6 + 6 473 18.622
5.827 10.945 16.102 21.220 26.378 31.496 36.654 41.772 46.929 52.047
GHM 6 + 6 + 6 705 27.756
Theoretically recommended dimensions

Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
Roxtec 211 4/28/06 3:15 PM Page 1

213-06

ROXTEC
Cable & Pipe Transit System Components
For Non-Welded Installation
The RX and RS X kits consist of a round
penetration and sleeve solution attached
to the construction through expansion,
when welding is not allowed or desired.
The specially designed expansion sleeve
has a rubber gasket on the outside. As
the bolts on the sleeve are tightened, the
gasket expands in the hole to firm
attachment. An R frame or an RS seal is
then fitted into the opening of the sleeve.

RX kits, R frame with galvanized sleeve

R Frame Galvanized R Frame Acid Proof Stainless Steel Packing Aperture External Dimensions Sleeve
Space ØxD Wt.
Kit Art. No. Kit Art No. mm mm in mm in kg lbs.
– – RX 75AISI 316/galv. RXG 0000751021 40 x 40 116 4.567 165 x 55 6.496 x 2.165 1.6 3.527
RX 100 galv./galv. RXG 0001001018 RX 100AISI 316/galv. RXG 0001001021 60 x 60 146 5.748 195 x 55 7.677 x 2.165 2.2 4.850
RX 125 galv./galv. RXG 0001251018 RX 125AISI 316/galv. RXG 0001251021 80 x 80 171 6.732 213 x 55 8.386 x 2.165 2.8 6.173
RX 150 galv./galv. RXG 0001501018 RX 150AISI 316/galv. RXG 0001501021 90 x 90 200 7.874 236 x 55 9.291 x 2.165 3.5 7.716
RX 200 galv./galv. RXG 0002001018 RX 200AISI 316/galv. RXG 0002001021 120 x 120 251 9.882 290 x 55 11.417 x 2.165 4.6 10.141

RS X kits, RS seal acid proof, stainless steel & sleeve galvanized

With Core Without Core Aperture Ext. Dim. Sleeve


ØxD Wt.
Kit Art No. Kit Art No. mm in. mm in. kg lbs
RSX 43 AISI 316/galv. RSXG100431021 – – 83 3.268 110 x 65 4.331 x 2.559 0.8 1.764
RSX 50 AISI 316/galv. RSXG100501021 – – 91 3.583 140 x 65 5.512 x 2.559 1.2 2.646
RSX 75 AISI 316/galv. RSXG100751021 – – 116 4.567 165 x 65 6.496 x 2.559 1.6 3.527
RSX 100 AISI 316/galv. RSXG101001021 RSX100 AISI 316 woc/galv. RSXG001001021 146 5.748 195 x 65 7.677 x 2.559 2.2 4.850
RSX 125 AISI 316/galv. RSXG101251021 RSX125 AISI 316 woc/galv. RSXG001251021 171 6.732 213 x 65 8.386 x 2.559 2.8 6.173
– – RSX150 AISI 316 woc/galv. RSXG001501021 200 7.874 236 x 65 9.291 x 2.559 3.5 7.716

Seal For cable/pipe Seal For cable/pipe


mm in. mm in.
RS 43 0+4-23 0+0.157-0.906 RS 100 / RS 100woc 0+48-70 / 48-70 0+1.890-2.756 / 1.890-2.756
RS 50 0+8-30 0+0.315-1.181 RS 125 / RS 125 woc 0+66-98 / 66-98 0+2.598-3.858 / 2.598-3.858
RS 75 0+26-48 0+1.024-1.890 RS 150 woc 93-119 3.661-4.685

RX 75 RX 100 RX 125 RX 150 RX 200


Pos. mm in mm in mm in mm in mm in
a 165 6.496 195 7.677 213 8.386 236 9.291 290 11.417
b 115 4.528 145 5.709 170 6.693 199 7.835 250 9.843
c 43 1.693 43 1.693 43 1.693 43 1.693 43 1.693
d 55 2.165 55 2.165 55 2.165 55 2.165 55 2.165
e * * ** ** ** ** ** ** *** ***
* SW 5mm (4x) / SW 0.197” (4x) ** SW 5 mm (6x) / SW 0.197” (6x) *** SW 5 mm (8x) / SW 0.197” (8x)

RS X 43 RS X 50 RS X 75 RS X 100 (woc) RS X 125 (woc) RS X 150 (woc)


Pos. mm in mm in mm in mm in mm in mm in
a 110 4.331 140 5.512 165 6.496 195 7.677 213 8.386 236 9.291
b 82 3.228 90 3.543 115 4.527 145 5.709 170 6.693 199 7.835
c 53 2.087 53 2.087 53 2.087 53 2.087 53 2.087 53 2.087
d 65 2.559 65 2.559 65 2.559 65 2.559 65 2.559 65 2.559
e **** **** **** **** ***** ***** ***** ***** ***** ***** ***** *****
**** SW 4mm (4x) / SW 0.157* (4x) ***** SW 5 mm (6x) / SW 0.197* (6x) Note: All dimensions are nominal values.

Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
Roxtec 212 4/28/06 3:16 PM Page 1

214-06

ROXTEC
RS OMD Cable/Pipe Sleeve
Intended for single cable and pipe penetrations. Multidiameter
interior layers of rubber can be peeled away, adjusting the seal to fit
cable and pipe of varying diameters. The RS OMD seal also has
exterior layers which make it possible to adjust the seal to fit pipe
sleeves of different diameters. Only 8 sizes of seals are needed to
seal cables and pipes from 3.6mm to 119mm in diameter, in sleeves
with a diameter span of 23mm to 168mm.
The halogen free elastomer was specially developed for optimum sealing capacity in
fireproof applications and demanding environments. The rubber in the seals also reduces
the risk of damage to the hull caused by vibrations, induced by for example hydraulic
systems, and mechanical noise reduction of pipes. RS OMD seals are approved for use in
A 60-rated sections and are watertight and gastight up to 4 bar. They are available with
front/end fittings in acid-proof stainless steel AISI 316/Roxylon rubber.
Cable/Pipe Ext. diam. Depth Inner diam.
Type 0/ [mm] 0/ [mm] [mm] 0/ [mm]
RS-23 OMD 3.6-11 23 - 2.75 41 23 - 28
RS-31 OMD 4-17 31 - 35.5 41 31 - 37
RS-43 OMD 4-23 43 - 51 80 43 - 52
RS-50 OMD 8-30 50 - 58 80 50 - 59
RS-68 OMD 26-48 68 - 76.5 80 68 - 78
RS-100 OMD 48-70 100 - 108 83 100 - 109
RS-125 OMD* 68-98 125 - 143 83 125 - 144
RS-150 OMD* 93-119 150 - 167 85 150 - 168
* Supplied without a solid center core. Solid center core is optional for RS 125 OMD.

PPS Plastic Pipe Sealing System


This system was developed to seal plastic pipes (PP and PVC) onboard vessels, and ensures that the penetrations are
fireproof and watertight.
A PPS kit consists of two RS seals
and one intumescent strip. The
intumescent strip is wrapped around the
plastic pipe, which is then inserted into a
sleeve. The RS seals are inserted in
each end. When exposed to heat the
strip will expand, crush the pipe, and
seal the transit. In case of water or gas
pressure the RS seals keep the
installation tight.

Ext. Dia. Ext. Depth Inner Weight


Product (mm) (mm) Range (mm) (kg) Ma TRANSITS
PPS CRS 43 43 156 0 + 16.0 - 23.0 The frames and seals come in a variety of materials.
PPS CRS 50 50 156 0 + 16.0 - 30.0 Depending on the application, the appropriate transit can
PPS CRS 68 68 156 0 + 26.0 - 48.0
be welded, bolted or fitted into existing sleeves. The
PPS CRS 75 75 156 0 + 26.0 - 48.0
PPS CRS 100 100 156 0 + 48.0 - 70.0 transits are approved for use with pipes made of steel,
PPS CRS 125 125 156 0 + 66.0 - 98.0 PP and PVC.
PPS CRS 150 150 156 0 + 93.0 - 110.0

Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
0211-04 4/28/06 3:17 PM Page 1

215-06

Stainless Steel Banding

316 Stainless Steel Band (PPA 571 Coated) Pkg. Qty 1 Type 201 Band - with EASY SCALE imprint
Cat. Width Length Weight 100 Ft. Per Roll (30.5M) Type 201 Stainless Steel
No In mm Ft M Lbs Kg Cat Width Thickness Weight
AE432 1/4 6.35 82.5 25 2.0 .9 No. Inches mm Inches mm Lbs Kg
AE433 3/8 9.53 82.5 25 2.6 1.2 C201 3/16 4.76 .015 .38 1.2 .54
AE434 1/2 12.70 82.5 25 3.5 1.6 C202 1/4 6.35 .020 .51 1.7 .77
AE435* 5/8 15.88 82.5 25 4.4 2.0 C203 3/8 9.53 .025 .63 3.2 1.6
AE436 3/4 19.05 82.5 25 5.3 2.4 C204 1/2 12.70 .030 .76 5.1 2.4
C205 5/8 15.88 .030 .76 6.4 3.0
Note: Thickness = .018" (.457 mm) S.S., when coated = .048" (1.22 mm) 3/4
C206 19.05 .030 .76 7.7 3.6
316 Stainless Steel Band Also available in mill coil lengths. All sizes available in standard
(Uncoated) Pkg. Qty 1 Thickness: 015" (.38 mm) cardboard packaging. All sizes except for 1/4" (C202) and 3/16"
(C201) available in plastic Tote packaging.
AE442 1/4 6.35 82.5 25 2.0 .9
AE443 3/8 9.53 82.5 25 2.6 1.2
AE444 1/2 12.70 82.5 25 3.5 1.6
AE445* 5/8 15.88 82.5 25 4.4 2.0
AE446 3/4 19.05 82.5 25 5.3 2.4
*Coast Guard approved Plastic Totes
100 Ft. Per Roll (30.5M)
Type 201 Stainless Steel
Plastic Totes (complete with band)
Cat. Width Thickness Weight
All Purpose Band No. Description Inches mm Inchesmm Lbs Kg
Metal Thickness .030" (.75 mm) Coated Thickness .050" (1.3 mm) C203Y 3/8" Band in Yellow Tote 3/8 9.53 .025 .63 3.62 1.6
C204B 1/2" Band in Blue Tote 1/2 12.70 .030 .76 5.56 2.5
Type 316 Stainless Steel (PPA 571 Coated)
C205G 5/8" Band in Green Tote 5/8 15.88 .030 .76 6.85 3.1
Cat. Width Length Weight Hole Diameter
C206R 3/4" Band in Red Tote 3/4 19.05 .030 .76 8.16 3.7
No. In mm Ft M Lbs Kg In mm
1/2 3/16
AE465 12 33 10 1.2 .6 5 Ratchet Tool
AE466 3/4 17 33 10 2.1 1.0 9/32 7
AE467 1 26 33 10 2.9 1.3 5/16 8 Cat. Description Weight
AE475 1/2 12 82.5 25 3.1 1.4 3/16 5 No. Lbs Kg
AE476 3/4 17 82.5 25 5.3 2.4 9/32 7 C400 Band/buckle 3.4 1.5
AE477 1 26 82.5 25 7.3 3.3 5/16 8
1/2 3/16
ratchet tool
AB465 12 9.9 3 .4 .2 5
AB466 3/4 17 9.9 3 .4 .2 9/32 7
Banding Tool
Type 316 Stainless Steel (Uncoated)
AE405 1/2 12 33 10 1.2 .6 3/16 5 Cat. Description Weight
AE406 3/4 17 33 10 1.9 .9 9/32 7 No. Lbs Kg
AE407 1 26 33 10 2.2 1.0 5/16 8 C001 Banding Tool 4.4 2.0
AE425 1/2 12 82.5 25 3.1 1.4 3/16 5
AE426 3/4 17 82.5 25 4.6 2.1 9/32 7 Bantam Tool C075
AE427 1 26 82.5 25 5.5 2.5 5/16 8 C075 3-way handle version 2.6 1.2
AB405 1/2 12 9.9 3 .4 .2 3/16 5 for one-hand pistol grip or
AB406 3/4 17 9.9 3 .4 .2 9/32 7 two-hand tensioning
Galvanized Carbon Steel (PPA 571 Coated)
AE565 1/2 12 33 10 1.2 .6 3/16 5
Cable Tie Tensioner
AE566 3/4 17 33 10 2.1 1.0 9/32 7 AE200 For Tensioning 6 .3
AE567 1 26 33 10 4.0 1.8 5/16 8 Ties and
AE575 1/2 12 82.5 25 3.1 1.4 3/16 5 Multi-Lok Ties
AE576 3/4 17 82.5 25 5.3 2.4 9/32 7
AE577 1 26 82.5 25 9.9 4.5 5/16 8 Tensioning Hook
AB565 1/2 12 9.9 3 .4 .2 3/16 5 AE201 For Tensioning .1 .05
AB566 3/4 17 9.9 3 .4 .2 9/32 7 Ties and
Multi-Lok Ties

L.F. GAUBERT & CO., INC. Over 50 Years in Business


700 S. Broad St. - P. O. Box 50500 - New Orleans, LA 70150
Tel: 504-822-7272 • Fax: 504-821-9309 • Toll Free: 800-831-7534 MARINE, ELECTRICAL
AND
E-mail: sales@gaubertcable.com
www.gaubertcable.com INDUSTRIAL SUPPLIES
0212-04 4/28/06 3:18 PM Page 1

216-06

CABLE TIES U. S. Coast Guard


approved (.31" widths)

304 Stainless Steel (Pkg. Qty: 100)


Cat. Max. Bundle Approx. Approx. Min. Loop Tensile
No. Diameter Length Width Weight Strength
In mm In mm In mm Lbs. K Lbs N
KE1128 2.0 50 7.9 201 0.18 4.6 .57 .26 100 445
Manufactured from 316 and 304
KE1138 2.7 69 10.2 259 0.18 4.6 .70 .32 100 445
Stainless Steel KE1148 4.0 102 14.2 360 0.18 4.6 .92 .42 100 445
KE1158 6.0 152 20.4 520 0.18 4.6 1.32 .60 100 445
• Self-Locking operation KE1168 8.0 203 26.8 679 0.18 4.6 1.76 .80 100 445
• Two widths - 4.6mm and 7.9mm KE1178 10.0 254 33.0 838 0.18 4.6 2.07 .94 100 445
• Smooth I.D. KE1188 12.0 305 42.0 1067 0.18 4.6 2.38 1.08 100 445
KE1328 2.0 50 7.9 201 0.31 7.9 .99 .45 250 1112
Install Ball-Lok stainless steel ties with the lightweight, KE1338 2.7 69 10.2 259 0.31 7.9 1.32 .60 250 1112
portable Ball-Lok Tool with automatic cut-off. Or, use KE1348 4.0 102 14.2 360 0.31 7.9 1.67 .76 250 1112
one of the hand tools readily available on the market. KE1358 6.0 152 20.4 520 0.31 7.9 2.23 1.04 250 1112
Or, simply tighten by hand. KE1368 8.0 203 26.8 679 0.31 7.9 2.86 1.30 250 1112
KE1378 10.0 254 33.0 838 0.31 7.9 3.52 1.60 250 1112
KE1388 12.0 305 42.0 1067 0.31 7.9 4.62 2.10 250 1112

316 Stainless Steel (Pkg. Qty: 100)


Uncoated
KE0128 2.0 50 7.9 201 0.18 4.6 .57 .26 100 445
KE0138 2.7 69 10.2 259 0.18 4.6 .70 .32 100 445
KE0148 4.0 102 14.2 360 0.18 4.6 .92 .42 100 445
KE0158 6.0 152 20.4 520 0.18 4.6 1.32 .60 100 445
KE0168 8.0 203 26.8 679 0.18 4.6 1.76 .80 100 445
KE0178 10.0 254 33.0 838 0.18 4.6 2.07 .94 100 445
KE0188 12.0 305 42.0 1067 0.18 4.6 2.38 1.08 100 445
KE0328 2.0 50 7.9 201 0.31 7.9 .99 .45 250 1112
KE0338 2.7 69 10.2 259 0.31 7.9 1.32 .60 250 1112
KE0348 4.0 102 14.2 360 0.31 7.9 1.67 .76 250 1112
KE0358 6.0 152 20.4 520 0.31 7.9 2.23 1.04 250 1112
KE0368 8.0 203 26.8 679 0.31 7.9 2.86 1.30 250 1112
KE0378 10.0 254 33.0 838 0.31 7.9 3.52 1.60 250 1112
KE0388 12.0 305 42.0 1067 0.31 7.9 4.62 2.10 250 1112

Ball-Lok Tools
Cat. Weight
No. Description Lb Kg
K502 Hand tool to apply all sizes of Ball-Lok Ties. .94 .43
Adjustable tension, automatic cut-off.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0213-04 4/28/06 3:18 PM Page 1

217-06

Approvals: – UL
– CE
– DNV
Reusable Stainless Steel Ties – U.S.C.G.
(Coated with Nylon 11) 200-300 Stainless Steel Multi-Lok Ties Type 316 Stainless Steel

Pkg Qty 100 Coated with Nylon 11


Max. Dia. Package Quantity 100
Cat. Single Wrap Width Length Weight Max. Dia.
No. In mm In mm In mm Lbs Kg Cat. Single Wrap Width Length Weight
AE111 1.5 38 1/4 6.35 6 152 1.4 .6 No. In mm In mm In mm Lbs Kg
AE112 2.5 63 1/4 6.35 9 229 1.8 .8 AE 611 1.9 48 .276 7 6 150 .66 .3
AE113 3.4 86 1/4 6.35 12 305 2.1 1.0 AE 612 2.8 71 .276 7 9 225 .99 .45
AE114 5.4 137 1/4 6.35 18 457 3.0 1.4 AE 613 3.8 96 .276 7 12 300 1.32 .6
AE115 7.3 185 1/4 6.35 24 610 3.7 1.7 AE 614 5.7 144 .276 7 18 450 1.76 .8
AE311 1.5 38 3/8 9.53 6 152 1.8 .8 AE 615 7.6 193 .276 7 24 610 2.64 1.2
AE312 2.5 63 3/8 9.53 9 229 2.5 1.1 AE 711 1.9 48 .472 12 6 150 1.1 .5
AE313 3.4 86 3/8 9.53 12 305 3.1 1.4 AE 712 2.8 71 .472 12 9 225 1.65 .75
AE314 5.4 137 3/8 9.53 18 457 4.4 2.0 AE 713 3.8 96 .472 12 12 300 2.2 1.0
AE315 7.3 185 3/8 9.53 24 610 6.6 3.0 AE 714 5.7 144 .472 12 18 450 2.97 1.35
AE316 9.1 231 3/8 9.53 30 762 7.0 3.2 AE 715 7.6 193 .472 12 24 610 4.29 1.95
AE317 11.0 280 3/8 9.53 36 914 8.3 3.8 Uncoated Package Quantity 100
AE8638 3.4 86 5⁄ 8 15.88 12 305 5.6 2.5 AE 601 1.9 48 .276 7 6 150 .66 .3
AE8648 5.4 137 5⁄ 8 15.88 18 457 7.6 3.5 AE 602 2.8 71 .276 7 9 225 .88 .4
AE8658 7.3 185 5⁄ 8 15.88 24 610 9.7 4.4 AE 603 3.8 96 .276 7 12 300 1.21 .55
AE8668 9.1 231 5⁄ 8 15.88 30 762 11.9 5.4 AE 604 5.7 144 .276 7 18 450 1.98 .9
AE8678 11.0 280 5⁄ 8 15.88 36 914 13.9 6.4 AE 605 7.6 193 .276 7 24 610 2.64 1.2
Uncoated AE 701 1.9 48 .472 12 6 150 1.1 .5
AE8538 3.4 86 5⁄ 8 15.88 12 305 5.6 2.5 AE 702 2.8 71 .472 12 9 225 1.65 .75
AE8548 5.4 137 5⁄ 8 15.88 18 457 7.6 3.5 AE 703 3.8 96 .472 12 12 300 2.2 1.0
AE8558 7.3 185 5⁄ 8 15.88 24 610 9.7 4.4 AE 704 5.7 144 .472 12 18 450 3.19 1.45
AE8568 9.1 231 5⁄ 8 15.88 30 762 11.9 5.4 AE 705 7.6 193 .472 12 24 610 4.29 1.95
AE8578 11.0 280 5⁄ 8 15.88 36 914 13.9 6.4
Note: Metal Thickness = .011"(.279mm)
Note: Metal Thickness .015" (.38 mm) Coated Thickness =.026" (.66 mm) Coated Thickness = .018"(.46mm)

Cable Tie Tensioner Tie-It Tool


Pkg Qty 1
Cat. Weight
Cat. Description Weight
No. Description Lbs Kg
No. Lbs Kg
AE200 For Tensioning Reusable Ties and .6 .3 M503 For installing Multi-Lok .94 .43
Multi-Lok Ties and other self-locking ties

Tensioning Hook
Pkg Qty 1
AE201 For Tensioning Reusable Ties and .1 .05
Multi-Lok Ties
BAND-LOK Tool
BAND-LOK Ties
Cat. Weight
201 Stainless
No. Description Lbs. Kg
Package Qty: 100/bag
Width: 5/16” (7.9mm) Thickness: .015" (.38mm) A950 Hand tool for applying BAND-LOK Ties .94 .43
with adjustable tension, automatic cut-off
Cat. Clamp Length Max Bundle Dia. Weight
No. In mm In mm Lbs. Kg Thriftool Tool
BL211 10 254 2 51 1.35 .61
J075 Thriftool -10 per carton 5.90 2.7
BL212 16 406 3.5 89 2.29 1.03
J076 Thriftool -100 pack 55.30 25.1
BL 213 19 482 5 127 3.10 1.41
BL214 27 686 7 178 3.91 1.77 Pok-It II Tool
BL215 34 864 9 229 4.72 2.14
J020 Pok-It II Tool 1.1 .5

Florida Marine Products, Inc.


FLORIDA 2001 E. 5th Ave. Tampa, FL 33605
WHOLESALE Phone: 1-800-952-2283
Fixtures • Fittings • Ship Board Cable MARINE PRODUCTS Fax:
1-813-248-2283
1-813-247-7105
IN STOCK SAME DAY SHIPPING
INC. E-mail: fl-marine@ij.net
Web: www.fmpusa.com
0214-04 4/28/06 3:19 PM Page 1

218-06

The C001 Tool


Cat. Weight
No. Description Pkg Qty Lbs Kg
C001 The C001 Tool 1 4.4 2.0
C043 Close Quarter Tension Nut
Replaces tool tension handle when
space is limited. 1 .16 .07
C001 Tool C006 Tension Screw/Handle Kit 1 1.23 .56
C016 Bearing 1 .07 .03

Thriftool
Cat. Weight
No. Description Lbs Kg
Thriftool J075 Thriftool - 10 per carton 5.90 2.7
J076 Thriftool - 100 pack 55.30 25.1
Replacement Part
J072 Winding Mandrel .09 .04

Pok-It II Tool
Cat. Weight
Pok-It II Tool No. Pkg Qty Lbs Kg
J020 Pok-It II Tool 1 1.1 .5
Replacement Parts
Free-end clamp J027 Winding Mandrel Assembly 1 .54 .24
(Includes Wrench)
J024 Locking Pawl 1 .04 .02

Free-End Clamps Approvals: UL & CE


Stainless Steel Type 201 Total Length
Cat. Max Dia Max Dia (4" required Band Band
No. Once Around Twice Around for tool gripping) Width Thickness Pkg Weight
Inches mm Inches mm Inches cm Inches mm Inches mm Qty Lbs Kg
L103 2 50 - - 10 25 3/16 4.75 .015 .38 100 .9 .41
L104 31/2 88 11/2 38 16 40 3/16 4.75 .015 .38 100 1.4 .63
L107 5 127 21/2 63 19 48 3/16 4.75 .015 .38 100 1.8 .82
L108 7 177 31/2 88 27 68 3/16 4.75 .015 .38 100 2.2 1.0
L110 9 228 41/2 114 34 86 3/16 4.75 .015 .38 100 2.8 1.3
L203 2 50 - - 10 25 1/4 6.35 .020 .51 100 2.2 .99
L204 31/2 88 11/2 38 16 40 1/4 6.35 .020 .51 100 3.1 1.4
L221 31/2 88 11/2 38 16 40 3/8 9.53 .025 .63 100 6.2 2.8
L242 4 101 2 50 18 45 1/2 12.70 .030 .76 100 10.5 4.8
L207 5 127 21/2 63 19 48 1/4 6.35 .020 .51 100 3.5 1.6
L263 5 127 21/2 63 21 53 5/8 15.88 .030 .76 100 15.1 6.8
L284 6 152 3 76 24 60 3/4 19.05 .030 .76 50 10.9 4.9
L208 7 177 31/2 88 27 68 1/4 6.35 .020 .51 100 4.6 2.1
L246 8 203 4 101 31 78 1/2 12.70 .030 .76 25 4.7 2.1
L210 9 228 41/2 114 34 86 1/4 6.35 .020 .51 100 5.6 2.6
L288 10 254 5 127 37 93 3/4 19.05 .030 .76 25 7.6 3.5
L229 12 304 6 152 44 112 3/8 9.53 .025 .63 25 3.6 1.6
L290 14 355 7 177 50 127 3/4 19.05 .030 .76 25 9.7 4.4
L271 16 406 8 203 56 142 5/8 15.88 .030 .76 25 9.0 4.1
L292 18 457 9 228 62 157 3/4 19.05 .030 .76 25 11.6 5.3
L273 20 508 10 254 69 175 5/8 15.88 .030 .76 25 10.7 4.8

4560 W. 34th St., Suite E


HOUSTON, TEXAS 77092
LIGHTING & ELECTRICAL Ph: 713-681-8753 • Fax: 713-681-2865
conch
CONCH 1-800-999-0924
PRODUCTS
E-Mail: sales@conchcompany.com
www.conchcompany.com
0215-04 4/28/06 3:20 PM Page 215

219-06

TY523M
Tie body width .091"
Standard Nylon 6/6 Cable Ties
Maximum
TY524 Wire
Tie body width .140"
Body Bundle Military Tensile Bulk
Cat. Bulk Pkg. Width Length Dia. Standard Strength Unit Std. Pkg.
TY525M No. Cat. No. (in.) (in.) (in.) Part No. (lbs.) Quan. Pkg. Quan.
Tie body width .184"
TY523M TY23M .091 3.62 .625 MS3367-4 18 100 1000 1000
TY5272M TY52315M TYB2315M .091 7.00 1.500 — 18 100 500 1000
Actual size body width .270" TY5232M TY232M .091 8.00 2.000 — 18 100 500 1000
TY5234M TY234M .091 14.00 4.000 — 18 100 500 1000
TY524M TY24M .140 5.50 1.125 MS3367-5 30 100 1000 1000
TY5242M TY242M .140 8.19 2.000 — 30 100 500 1000
TY533M
TY526M TY26M .140 11.10 3.000 — 30 100 500 1000
TY5244M TY244M .140 14.50 4.000 — 30 100 500 1000
TY525M TY25M .184 7.31 1.750 MS3367-1 50 100 1000 1000
TY534M TY5253M TY253M .184 11.40 3.000 MS3367-7 50 100 1000 1000
TY528M TY28M .184 14.20 4.000 MS3367-2 50 100 500 1000
TY5272M† TY272M† .270 8.75 2.000 — 120 50 250 500
TY535M
TY5354M TY527M† TY27M† .270 13.40 3.500 MS3367-3 120 50 500 500
TY5275M TY275M .270 18.00 5.000 — 120 50 500 500
TY5277M TY277M .270 24.30 7.000 — 120 50 500 500
TY529M TY29M .301 30.00 9.000 MS3367-6 120 50 500 500
TY537M TY53510M† – .320 35.00 10.000 — 175 25 250 —
TY54513M† – .320 45.00 13.000 — 175 25 250 —

Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended for use in temperatures
ranging from 185°F to -40°F.

®
®
Recognized Models.
TY551M
TY5512M

Standard Nylon 6/6 Cable Straps and Clamps


TY553M
TY5532M Maximum
TY553A Body Wire Bundle Tensile Bulk
Std. Pkg. Bulk Pkg. Width Length Diameter Mounting Strength Unit Std. Pkg.
Cat. No. Cat. No. (in.) (in.) (in.) Hole (lbs.) Quan. Pkg. Quan.

TY533M TY33M .091 4.00 .625 #4 18 100 500 1000


TY534M TY34M .140 6.00 1.125 #8 40 100 500 1000
TY546M TY535M TY35M .184 7.80 1.750 #10 50 100 500 1000
TY5354M TY354M .184 14.60 4.000 #10 50 100 500 1000
1
TY537M TY37M .301 13.90 3.500 ⁄4 120 50 500 500
3
TY554M TY54M .140 5.96 1.125 ⁄16 40 100 500 1000
1
TY538M TY38M .184 7.80 1.750 ⁄4 50 100 500 1000
TY548M
Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended for use in temperatures
TY546MD ranging from 185°F to -40°F.

TY546MT Standard Nylon 6/6 Identification Cable Ties


Max. Marking
Body Wire Bundle Military Pad Size Tensile Bulk
Std. Pkg. Bulk Pkg. Width Length Dia. Standard (in.) Strength Unit Std. Pkg.
Cat. No. Cat. No. (in.) (in.) (in.) Part No. WxH (lbs.) Quan. Pkg. Quan.

TY551M TY51M .091 3.60 .625 MS3368-5 1 x .313 18 50 500 500


TY5512M TY512M .091 8.30 2 — 1 x .313 18 100 500 1000
TY546MF TY553M TY53M .091 4.00 .625 — .813 x .359 18 50 500 500
TY5532M TY532M .091 8.40 2 — .813 x .359 18 100 500 1000
TY546M TY46M .184 7.25 1.75 MS3368-1 5 x .875 50 100 500 1000
TY548M TY48M .184 14.2 4 MS3368-2 5 x 2.125 50 100 500 1000
TY546MD TY46MD .184 7.25 1.75 MS3368-3 1.172 x 1 50 50 250 500
TY546MT TY46MT .184 7.25 1.75 MS3368-4 1.210 x 1 50 100 500 500
— TY46MF .184 7.25 1.75 — 2.48 x 1 50 — — 500
Self-locking identification ties are available in both single and multiple configurations.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0216-04 4/28/06 3:21 PM Page 216

220-06

Wire Connectors
Free Spring Wire Connectors Fixed Spring Wire Connectors
Cat. Copper Wire Only Dimensions (in.) Cat. Copper Wire Only Dimensions (in.)
No. Model Range Min. Max. Quantity A B C D E No. Model Range Min. Max. Quantity A B C D
10-602 Ctn./100 10-100 Ctn./100
10-612 Hi-Y 22–10 2 #18 3 #12 Ctn./1,000 15/64 1-3/64 5/16 27/64 41/64 10-110 Hi-0 22-16 1 #20 2 #16 Ctn./1,000 13/64 9/16 21/64 1/4
10-652 SOL Keg/500 10-120 w/1 #22 Keg/25,000
10-604 Ctn./100 10-102 Ctn./100
10-614 Hi-R 18-8 2 #16 5 #12 Ctn./1,000 19/64 1-3/16 7/16 33/64 25/32 3 #16
SOL Fixed 10-112 Hi-2 22-14 3 #22 Ctn./1,000 1/4 11/16 3/8 5/16
10-654 Bag/500 10-122 Keg/10,000
10-606 Ctn. /50 Spring
3 #10 10-103 Ctn. /100
10-616 Hi-G 18-8 2 #12 Ctn./1,000 5/16 1-5/16 15/32 37/64 27/32 10-113 Hi-3 22-14 3 #22 2 #14 Ctn./1,000 5/16 27/32 7/16 3/8
10-656 w/1 #12 Bag/250 w/1 #18
10-153 Bag/500
10-608 Ctn./50 10-104 Ctn./100
10-618 Hi-B 14-6 1 #10 1 #6 Ctn./1,000 3/8 1-39/64 37/64 11/16 1-3/32 10-114 Hi-4 18-10 1 #14 1 #10 Ctn./1,000 13/32 15/16 35/64 15/32
10-658 w/1 #12 w/2 #8 Bag/250 w/1 #18 w/1 #14
10-154 Bag/500
10-106 Ctn./100
File No. E17010 File No. LR6541 10-116 Hi-6 18-10 2 #14 4 #12 Ctn./1,000 15/32 1-3/64 21/32 17/32
10-156 Bag/250
Free Spring
Specialty Electrician’s Tools Fish Tapes - Conduit Fishing Tools
Fuse Pullers Oil tempered flat spring
• Rugged fiber construction steel fish tape in
• Plier design dispenser/storage reel.
• Helps prevent bending of fuse clips • One piece, high-impact case.
Cat. No. Description Wt. Per 100 • Durable, easy grip handle and brake.
19-164 Pocket size – 0-200 amps, 250 V 17
• Slip resistant inner ring.
& 1-100 amps 600 V • Enlarged tape viewports.
19-165 Midget size – For small fuses 3/16” 17
Cat. No. Description Wt. Per 100
to 1/2” dia.
19-166 Giant size – 100-600 amps, 250 V 33 14-250 8-1/2” reel dia. –1/8” x .060” x 50’ 208
& 60-400 amps, 600 V 14-251 8-1/2” reel dia. –1/8” x .045” x 50’ 183
14-258 12” reel dia. – 1/8” x .060” x 100’ 400
Standard Carton 1. Standard Package 6.
14-259 12” reel dia. – 1/8” x .060” x 200’ 650
14-260 12” reel dia. – 1/4” x .060” x 100’ 666
Wire Strippers & Cable Rippers Standard Carton 1. Standard Package 6.
Wire Stripper 19-850 & 19-850S
Accessories
• Sizes, strips and cuts wire #16-6 solid, #18-8 stranded. Cat. No. Description Wt. Per 100
• Model 18-850S has anchored handle spring for easy handle
14-223 Handle for 8-1/2” reel 12
operation. Spring stays put. 14-225 8-1/2” reel case only 50
• Model 18-850, without spring, stays closed in pouch. Curved, 14-227 Handle for 12” reel 12
cushioned handles allow easy comfortable operation. 14-228 12” reel case only 75
• Conduit reaming nose, wire looping holes. Standard Carton 1. Standard Package 1.
• Adjustable hinge bolt assures stripping blade alignment.
• 1/2” cutting blade is hardened to hold the edge. Steel Fish Tape Coils
• Made of premium tool steel. Spring steel fish tape in coils.
Cat. No. Description Wt. Per 100 Without dispenser reel.
18-800 Big-7” Wiring Tool 50
• Oil temperd, flat spring steel.
19-850 Little-7” w/o Spring 58
19-850S Little-7” Wire Spring 58 • Rigid, with flexible spring action.
• Excellent tensile strength.
Standard Carton 1. Standard Package 6.
• Comes with preformed hook.
Combination Wiring Tool 18-800 Cat. No. Description Wt. Per 100

• Sizes, strips and cuts wire #16-6 solid, #18-8 stranded. 14-205 50’ x 1/8” x .045” (3/64”) 125
14-206 100’ x 1/8” x .045” (3/64”) 250
• Sizes, threads and cuts bolts, 4-40, 6-32, 8-32, 10-32, 10-24.
14-207 50’ x 1/8” x .060” (1/16”) 158
• Crimps bare and insulated terminals #22-10 AWG. 14-208 100’ x 1/8” x .060” (1/16”) 300
• Conduit reaming nose, wire looping holes. 14-209 200’ x 1/8” x .060” (1/16”) 538
• Adjustable hinge bolt assures stripping blade alignment. 14-210 100’ x 1/4” x .060” (1/16”) 567
• 1/2” cutting blade is hardened to hold the edge. 14-211 200’ x 1/4” x .060” (1/16”) 1100

• Made of premium tool steel. Standard Carton 1. Standard Package 6.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0217-04 4/28/06 3:22 PM Page 217

221-06

CRIMP TERMINALS
1 250 Series – Female
RA18-250F Disconnects
Nylon Insulated Ring – Non-Insulated Ring nylon self-insulated
Cat. Pkg. Wire Max.
installing tools – WT145C,
No. Qty. Range Ins.
Insulation Grip Cat. Bolt WT2000, ERG-2001,
ERG-2003, WT112M
No. Hole 1 RA18-250F 100 22-18 .136
Cat. Bolt Pkg. Qty. 25, 9-8-7 Wire Range RB14-250F 100 16-14 .162
No. Hole D8-10* #10 2 RC10-250F 50 12-10 .215
Pkg. Qty. 100, 22-16 Wire Range, .136 Max. Ins. D8-14* b" 2 18RA-250F 100 22-18 .150
RA18-4 #4 D8-516* j" 18RA-250F 14RB-250F 100 16-14 .170
D8-38* c" vinyl self-insulated 10RC-250F 50 12-10 .250
RA18-6 #6
D8-12* d" installing tools – WT145C,
RA18-8 #8 WT2000, ERG-2001,
18RA-2577 100 22-18 .165
RA18-10 #10 Pkg. Qty. 200, 9-8-7 Wire Range ERG-2003, WT112M 14RB-2577 100 16-14 .185
3
RA18-14 b" D10161 #8 10RC-2577 50 12-10 .225
RA18-516 j" D10361 #10
RA18-38 c" D10711 b" 3 4 RAS18-250AX 50 22-18 .170
RA18-12 d" D10721 j" RBS14-250AX 50 16-14 .200
D10731 c" 18RA-2577 RCS10-250AX 25 12-10 .250
Pkg. Qty. 100, 18-14 Wire Range, .162 Max. Ins.
D975* d" nylon fully-insulated
RB14-4 #4 installing tools – WT145C, Material: brass
RB14-6 #6 Pkg. Qty. 20, 6-5 Wire Range WT2000, ERG-2001, Finish: tin plated
RB14-8 #8 E6-10* #10 ERG-2003, WT112M
RB14-10 #10 E6-14* b" U.L. Listed E66716
RB14-14 b" E6-516* j"
RB14-516 j" E6-38* c" 4
RB14-38 c" E6-12* d"
RB14-12 d"
Pkg. Qty. 200, 6-5 Wire Range
RAS18-250AX 250 Series – Male Tabs
heat-shrinkable fully
Pkg. Qty. 50, 12-10 Wire Range, .210 Max. Ins. E10261 #10 insulated disconnects Tab size - .250 x .032
RC10-6 #6 E10711 b" installing tool – WT1255 Cat. Pkg. Wire Max.
RC10-8 #8 E10721 j"
RC10-10 #10 No. Qty. Range Ins.
E10731 c"
RC10-14 b" 18RA-250T 100 22-18 .150
Pkg. Qty. 20, 4-3 Wire Range 5 5
RC10-516 j" 14RB-250T 100 16-14 .170
F4-10* #10
RC10-38 c" 10RC-250T 50 12-10 .250
F4-14* b" 18RA-250T
RC10-12 d"
F4-516* j" vinyl self-insulated 18RA-251T 50 22-18 .150
U.L. Listed E9809 F4-38* c" 6
installing tools – WT145C, 14RB-251T 50 16-14 .170
F4-12* d" WT2000, ERG-2001, 10RC-251T 25 12-10 .210
Pkg. Qty. 100, 4-3 Wire Range ERG-2003, WT112M
18RAS-251TX 50 22-18 .170
F10261 #10 7 14RBS-251TX 100 16-14 .200
F10711 b"
6 10RCS-251TX 100 12-10 .250
F10721 j"
F10731 c"
8
* Not available on Mylar Tape. A18-250T 100 22-18 –
18RA-251T B14-250T 100 20-14 –
Installing tools: ERG-2005 (D Series only)
Nylon Insulated Fork – WT115A,D, E, F & G, TBM6/TBM65, WT3185
nylon fully insulated
installing tools – WT145C,
9
WT2000, ERG-2001, A18-251T 100 22-18 –
Insulation Grip ERG-2003, WT112M B14-251T 100 16-14 –
Cat. Bolt C10-251T 50 12-10 –
No. Hole Non-Insulated Fork 7
Pkg. Qty. 100, 22-16 Wire Range, .136 Max. Ins. Material: brass
RA18-6F #6 Cat. Bolt 18RAS-251TX
RA18-8F #8 No. Hole heat shrinkable nylon fully Finish: tin plated
Pkg. Qty. 100, 22-16 Wire Range insulated
RA18-10F #10
installing tool – WT1255
RA18-14F b" A18-6F #6
Pkg. Qty. 100, 18-14 Wire Range, .162 Max. Ins. A18-8F
A18-10F
#8
#10 8
Installation Tools
RB14-6F #6
RB14-8F #8 Pkg. Qty. 100, 18-14 Wire Range
RB14-10F #10 B14-6F #6 A18-250T
Non-insulated/insulated grip
RB14-14F b" B14-8F #8 installing tool – WT110M
Pkg. Qty. 50, 12-10 Wire Range, .210 Max. Ins. B14-10F #10
RC10-6F #6 B14-14F b"
9 WT112M
RC10-8F #8 Pkg. Qty. 50, 12-10 Wire Range
RC10-10F #10 C10-6F #6
RC10-14F b" C10-8F #8 18-251T
C10-10F #10 Non-insulated
U.L. Listed E9809 installing tools – WT110M,
C10-14F b"
Installing tools: WT145C, WT2000, WT112M, WT111M, WT2000,
U.L. Listed E9809 WT112M, ERG-2002, WT112M
ERG-2001, ERG-2003, WT145A
Installing tools: WT111M, WT112M, ERG2001
WT110M, WT2000, ERG-2002

www.manning-electric.com
Stocking Distributor for
MIPCO Russellstoll ®
TM
Thomas & Betts

154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
220 4/28/06 3:23 PM Page 218

222-06

Tooling for Heavy Duty Battery Connectors & Battery Connectors – Code Copper
Conductor Conductor (for 600V)
Two-Way Connectors
BCT840, BCT840S TBM8250, TBM8250S, Cat. Cable Dimensions (in.)
TBM8250-BM, No. Size A E J
TBM8250S-BM
32503 †
14 sol. to 8 sol. 1a c v
32505† 8 sol. to 4 str. 1c d w
32507 4 sol. to 1 str. 1e e B
32509 1 sol. to 2/0 1g f 1o
32511 2/0 to 4/0 2j n 1b
TBM101, TBM101S 364RF 32513 4/0 to 300 2l 1a 1d
32515 300 to 500 2f 1b 1A
32517 500 to 750 3a 1d 2h
32519 750 to 1000 3g 1L 2s

† With Filister Head Screw

Crimping Tools G bolt size


Cat.
No. Description
BCT840 • Adjustable die crimping tool for color-keyed cast and tubular
BCT840S connectors.
• The single die is an integral part of the tool; no dies to lose or
misplace.
• Available with mechanism to insure a complete crimp every time.
(BCT840S) One-Bolt Hole 90° Upright
• Crimps casting and tubular connectors ranging from 4 AWG to Cat. Cable Dimensions (in.)
4/0. No. Size G A B C D J F
TBM101 • Designed for medium crimps ranging from 8 AWG to 1 AWG. 31005-UAL† 8 to 4 b 1a e d a d s
TBM101S • 18" handle is ideal for applications with limited space. 31007-UAL 4 to 1 b 1y m e r m X
• Adjustable rotating dies are secured in the tool to increase 31009-UAL 1 to 2/0 c 2o 1 m b n k
efficiency and prevent lost dies. (TBM101S) 31011-UAL 2/0 to 4/0 c 2d 1b 1 s 1a w
• Available with mechanism to insure a complete crimp every time.
† With Filister Head Screw. All others, hex head screws.
TBM8250 • Adjustable rotating dies are secured in the tool to increase Bolt holes and spacings listed are standard, but lugs with blank tongues will be furnished, if specified.
TBM8250S efficiency and prevent lost dies.
TBM8250-BM • Available with mechanism to insure a complete crimp every
TBM8250S-BM time.
• Available in a bench mount style. (-BM)
G bolt size
TBM5 • Heavy Duty crimping tool including dies for 8AWG-4/0 battery
TBM5S connectors, lugs, and splices.
• Available with mechanism to insure a complete crimp every time.
(TBM5S)

Cable Cutter
Cat.
No. Description Two-Bolt Hole
364RF • Cuts cable up to 350 MCM Cat. Cable Dimensions (in.)
• Fiberglass handles and carbon steel blades No. Size G A B C D J F H
• For copper and aluminum cable only
32003† 14 to 8 b 1L 1b d a v s e
TBM250C • Cuts cable up to 250 MCM 32005† 8 to 4 b 1f 1b d a w s e
TBM250C-BM • For copper and aluminum cable only 32007 4 to 1 b 2b 1k e r g s f
• Available in a bench mount style (-BM) 32009 1 to 2/0 c 2g 1n m b u k 1
32011 2/0 to 4/0 c 3a 2 1 s n k 1
32013 4/0 to 300 c 3c 2a 1i j 1l k 1
Cable Stripper 32015 300 to 500 c 3d 2a 1c X 1B k 1
32017 500 to 750 d 4x 3 1f u 2a l 1d
BCS8-40 • Cable stripper for cable 8 AWG-4/0 battery cable 32019 750 to 1000 d 4B 3 1g v 2X l 1d
• Replacement blade provided in the handle
† With Filister Head Screw. All others, hex head screws.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0219-04 4/28/06 3:24 PM Page 219

223-06

Motor Pigtail Connectors – One Line to


One Load (2 Wire)
Material: High Conductivity Copper
Plating: Tin
Insulator: Thermoplastic Elastomer

Installing Tools
Cat. No. TBM5 TBM8 Hydraulic Tools &
Female Male TBM25S TBM6, TBM6S, TBM60RS TBM5S TBM8S TBM50S Hand Tool
Disconnect Disconnect ERG2002 TBM20S Upper Die Lower Die Die Set Die Set Die Code Color
MD1614F-0 MD1614M-0 X
MD1614F-1 MD1614M-1 X
MD1210F-1 MD1210M-1 X
MD1210F-2 MD1210M-2 X
MD8F-1 MD8M-1 X 13475 13477 13454 13461 21 Red
MD8F-2 MD8M-2 X 13475 13477 13454 13461 21 Red
MD6F-1 MD6M-1 X 13475 13477 13454 13461 24 Blue
MD6F-2 MD6M-2 X 13475 13477 13454 13461 24 Blue
MD4F-2 MD4M-2 X 13472 13476 13454 13461 29 Gray
MD2F-2 MD2M-2 X 13474 13477 13454 13461 33 Brown
MD2F-3 MD2M-3 X 13474 13477 13454 13461 33 Brown
MD1F-2 MD1M-2 13474 13477 13455 13462 37 Green
MD1F-3 MD1M-3 13474 13477 13455 13462 37 Green
MD10F-3 MD10M-3 13475 13477 13455 13462 42 Pink
MD20F-3 MD20M-3 13474 13477 13455 13462 45 Black
MD30F-3 MD30M-3 13474 13477 13455 13462 50 Orange
MD40F-3 MD40M-3 13475 13477 13456 13463 54 Purple
Specifications: Wire range: No. 16 to 4/0 AWG. Rating: 600V, 90°C. Material: High conductivity copper. Plating: Tin. Insulator: Thermoplastic Elastomer. 1. Choose appropriate COLOR-KEYED® disconnect for
conductor size to be terminated. Note color of bands on disconnect barrel. 2. Select proper installing die by matching die color to disconnect barrel color bands. 3. Install die in tool, insert stripped wire into barrel
of disconnect and compress between color bands. Repeat for mating half. 4. Snap the two halves together and slip on insulator over mated connection. Secure insulator with TY-RAP® cable ties provided with the
insulators.

Motor Pigtail Connectors – One Line to


Two Load (3 Wire)
Material: High Conductivity Wrought Copper
louvered contact bands
Finish: Electro-Tin Plate, color-coded to match
installing dies
Female Disconnect Male Disconnect

Cat. No. Strip


Specifications (in.)
Female Male Body Color Boot Length
Disconnect Disconnect Wire Size Size Code Insulation A B C D E F (in.)
MD1210F-1 M2D1210M-1 12-10 AWG 1 Yellow M2DBOOT-1 .380 .380 .780 .750 .380 .25 c"
MD1210F-2 M2D1210M-2 12-10 AWG 2 Yellow M2DBOOT-2 .500 .500 .900 1.500 .500 .37 c"
MD8F-1 M2D8M-1 8 AWG 1 Red M2DBOOT-1 .380 .380 .820 1.125 .380 .25 k"
MD8F-2 M2D8M-2 8 AWG 2 Red M2DBOOT-2 .500 .500 .950 1.500 .500 .37 k"
MD6F-1 M2D6M-1 6 AWG 1 Blue M2DBOOT-1 .380 .380 .875 1.125 .380 .25 d"
MD6F-2 M2D6M-2 6 AWG 2 Blue M2DBOOT-2 .500 .500 1.020 1.500 .500 .37 d"
MD4F-2 M2D4M-2 4 AWG 2 Gray M2DBOOT-2 .500 .500 1.060 1.500 .500 .37 d"
MD2F-2 M2D2M-2 2 AWG 2 Brown M2DBOOT-2 .500 .500 1.090 1.500 .500 .37 w"
MD2F-3 M2D2M-3 2 AWG 3 Brown M2DBOOT-3 .875 .875 1.460 2.630 .875 .50 w"
MD1F-2 M2D1M-2 1 AWG 2 Green M2DBOOT-2 .50 .50 1.230 1.500 .500 .37 l"
MD1F-3 M2D1M-3 1 AWG 3 Green M2DBOOT-3 .875 .875 1.560 2.630 .875 .50 l"
MD10F-3 M2D10M-3 1/0 AWG 3 Pink M2DBOOT-3 .875 .875 1.560 2.630 .875 .50 l"
MD20F-3 M2D20M-3 2/0 AWG 3 Black M2DBOOT-3 .875 .875 1.590 2.630 .875 .50 e"
MD30F-3 M2D30M-3 3/0 AWG 3 Orange M2DBOOT-3 .875 .875 1.710 2.630 .875 .50 L"
MD40F-3 M2D40M-3 4/0 AWG 3 Purple M2DBOOT-3 .875 .875 1.810 2.630 .875 .50 f"

Operating Range: 600V max., 1000V max. in signs and fixtures. Listing: U.L. Listed and CSA Certified for 12 - 8 AWG solid copper conductors and stranded copper conductors in the sizes shown. Selection:
Always use the same body size when selecting male and female disconnects. For example, to connect a 2 AWG male to an 8 AWG female, select Catalog Numbers M2D2M-2 and MD8F-2. Both have body size 2.
Insulation: Use insulating boots matching the disconnect body size as indicated in the chart. To protect the connection from moisture and dirt use sealing compound Catalog Number MDBOOT-SEAL.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0220-04 4/28/06 3:25 PM Page 220

224-06

600V Series Heat Shrinkable Tubing Heavy Duty Self-Igniting Torch


Fits Any Listed
Min. Max. Nom. or Certified Al or Cat. No. Description
Expanded Recovered Recovered Cu Splice with Dim
I.D. I.D. Wall Std. No Larger Than Cable Std. SIT-1 SHRINK-KON® Torch for 14 or 16 oz. cylinders
Cat. No. (in.) (in.) (in.) Lgth. O.D. Lgth. Range Pkg. SIT-2 Adapter and 5 foot extension hose

HS16-12 3 in. 100


#14 to #10
HS16-12L .350" .120" .070" 6 in. å" 1" 25
AWG
HS16-12-4 4 ft. 50 Electric Heat Gun
HS12-6 3 in. 100
#8 to #6 Cat. No. Description
HS12-6L .510" .160" .090" 6 in. c" 1f" 25
AWG WT1400
HS12-6-4 4 ft. 50
WT1400 Dual Speed/Temp. 450-1000°F 1400
HS6-1 4 in. 25 watts requires 12-18 amp outlet
#6 to #2
HS6-1L .750" .240" .090" 8 in. e" 2d" 25
AWG
HS6-1-4 4 ft. 50 U.L./CSA approved. Note: Other installation tools are
HS4-30 5 in. 20 available. Three models to choose from: 500°F to 1000°F
#1 to 3/0 heat range. 120 V. 60 Hz A.C.
HS4-30L 1.100" .350" .120" 9 in. f" 3b" 10
AWG
HS4-30-4 4 ft. 50
HS40-400 8 in. 10
HS40-400L 1.500" .470" .160" 12 in.
2/0 to 350
MCM
10 Thin Wall Tubing Styles – 2:1
HS40-400-4 4 ft. 50
HS500-1000 9 in. 250 MCM 5
Shrink Ratio, Non-Lined
HS500-1000L 2.00" .630" .160" 15 in. to 10
HS500-1000-4 4 ft. 600 MCM 20 Minimum Maximum Nom.Recovered
Expanded I.D. Reduced I.D. Wall Thickness
HS12-30** 12 in. 750 MCM 10 Cat. No. in. (mm) in. (mm) in. (mm)
HS30-30** 3.540" 1.180" .160" 30 in. — to 10
HS30-4** 4 ft. 1250 MCM 5 CMP63-_-_ .063" (1.6) .031" (.8) .017" (.4)
HS12-40** 12 in. 1500 MCM 5 CPO63-_-_
HS30-40** 4.720" 1.570" .170" 30 in. — to 5 CMP93-_-_ .093"" (2.4) .046" (1.2) .020" (.5)
HS40-4** 4 ft. 2500 MCM 1 CPO93-_-_
CMP125-_-_
.125" (3.2) .062" (1.6) .020" (.5)
CPO125-_-_
Heat Shrinkable Series End Caps CMP187-_-_
CPO187-_-_
.187" (4.7) .093" (2.4) .020" (.5)

A CMP250-_-_
.250" (6.4) .125" (3.2) .025" (.6)
Minimum Maximum Recovered Nom. CPO250-_-_
Cat. Cable Expanded Recovered Wall Lgth. Std. CMP375-_-_
No. Range I.D. I.D. (in.) (in.) .375" (9.5) .187" (4.7) .025" (.6)
CPO375-_-_
Pkg.
CMP500-_-_
.500" (12.8) .250" (6.4) .025" (.6)
HSC8-4 #8 - #6 .510" .160" .090" 21⁄2" 100 CPO500-_-_
HSC2-20 #6 - #2 .750" .240" .090" 21⁄2" 100 CMP750-_-_ .750" (19.1) .375" (9.5) .030" (.8)
HSC30-250 #1 - 3/0 1.100" .350" .120" 3" 50 CPO750-_-_
HSC300-600 2/0 - 350 MCM 1.500" .470" .160" 31⁄4" 50 CMP1000-_-_
HSC700-1000 250 - 600 MCM 2.000" .630" .160" 31⁄2" 50 1.000" (25.4) .500" (12.8) .035" (.9)
CPO1000-_-_
HSC300* 800 - 1250 MCM 3.500" 1.180" .160" 41⁄2" 20
Available in reels of 100' and 1000'. Available in other colors. Material: Cross-linked
HSC500* 1500 - 2500 MCM 4.700" 1.570" .170" 51⁄2" 10 Polyolefin. Temp. Range: 125°C. CMP U.L. Recognized File Number E137759 and
* Not U.L. Listed or CSA Certified CSA Certified. (Note clear material not U.L. Recognized). CPO Meets MIL-1-23053/5.
(No marking on tubing). When ordering standard package, order by package not feet.
Material: Thermally stabilized, modified polyolefin provided with mastic sealant on I.D. applied
Use feet and inches only when ordering special cut lengths.
approximately 1” deep. • 4' & 6" Lengths only available in CPO Style

Heat Shrinkable Breakout Boots


D d L
Expanded Recovered Expanded Recovered Recovered Wall Thickness Wall Thickness Application
Dia. Dia. Dia. Dia. Length of Body of Leg Legs 600V
Cat. No. (Min.) (Min.) (Max.) (Max.) (Nom.) (Nom.) (Nom.) Conductor
No. Legs in./mm in./mm in./mm in./mm in./mm in./mm in./mm AWG/MCM
HSB200-75-2 2 1.97/50.0 0.83/21.0 0.90"/22.9 0.30"/7.6 4.69"/119.0 0.13"/3.2 0.13"/3.2 #3-300
HSB120-50-3 3 1.50"/38.1 0.65"/16.5 0.50"/12.7 0.16"/4.0 4.47"/113.5 0.11"/2.9 0.11"/2.9 #8-3/0
HSB170-82-3 3 2.20"/55.8 1.20"/30.4 0.89"/22.5 0.35"/9.0 7.09"/180.0 0.12"/3.0 0.12"/3.0 #1-600
HSB240-112-3 3 2.83"/72.0 1.46"/37.0 1.38"/35.0 0.69"/17.5 7.01"/178.0 0.16"/4.0 0.12"/3.0 300-1000
HSB125-50-4 4 1.38"/35.0 0.59"/15.0 0.47"/12.0 0.12"/3.0 3.74"/95.0 0.10"/2.5 0.08"/2.0 #12-2/0
HSB175-82-4 4 2.36"/60.0 1.18"/30.0 0.90"/22.9 0.25"/6.4 7.95"/202.0 0.16"/4.1 0.13"/3.3 #4-600
HSB265-120-4 4 3.10"/78.7 1.50"/38.1 1.40"/35.6 0.49"/12.50 9.45"/240.0 0.13"/3.3 0.13"/3.3 3/0-1000
HSB350-138-3 3 3.54"/90.0 1.38"/35.0 1.34"/34.0 0.55"/14.00 7.87"/200.0 0.12"/3.0 0.08"/2.0 4/0-1000
HSB430-157-3 3 4.33"/110.0 1.57"/40.0 1.38"/35.0 0.69"/17.50 7.01"/178.0 0.16"/4.0 0.12"/3.0 300 -
HSB490-200-3 3 4.92"/125.0 2.00"/50.8 2.32"/59.0 1.00"/25.40 11.14"/283.0 0.15"/3.8 0.15"/3.8 750 -
HSB520-135-4 4 5.25"/133.4 1.35"/34.3 3.00"/76.2 0.55"/14.00 10.02"/254.4 0.13"/4.1 0.16"/4.1 4/0 -

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0221-04 4/28/06 3:25 PM Page 221

225-06

Wire Marker Dispenser


Cat. No. Description
BPE Empty Dispenser
BPL Loaded Dispenser with Legends 0 thru 9
BPL-COL Loaded Dispenser with 10 NEMA colors
WDP-0-9 E-Z-Coder Wire Marker Tape Dispenser contains legends
0 thru 9
BP-0191 BP-0221
WDP1 E-Z-Coder Wire Marker Tape
Dispenser—empty; holds 5 rolls and may be “snapped” to
additional dispensers—empty 5 roll capacity dispenser
WVP Rigid Vinyl Safety Signs
Cat. No. Legend Rolls
Cat. No. Legend
BPR-0 0 10
BPR-1 1 10 CAUTION
BPR-2 2 10 Color—Black on Yellow
thru BPR-9 thru 9 10 BP-1102 Attach Grounding Wire Clips
BPR-0-9 0-9 1 BP-0191 Buried Cable
BPR-10-19 10-19 1 BP-0368 Connect Ground Wire Before Using
thru 90-99 thru 90-99 1 BP-0264 Different Feeders Do Not Tie
BPR-A A 10 BP-0263 Different Phases Do Not Tie
thru BPR-B-Z thru Z 10 BP-0647 Do Not Operate Without Safety Glasses
BPR-A-J A-J 1 BP-0528 Energized Equipment
BPR-I-R I-R 1 BP-0689 Equipment In This Room Starts Automatically
BPR-Q-Z Q-Z 1 BP-0882 Eye Protection Must Be Worn In This Area
BPR-H1 H1 10 BP-2026 Exposed Voltage Present During Test
BPR-H2 H2 10 BP-1040 High Voltage Underground Cable
BPR-H3 H3 10 BP-1106 Open Switches Before Replacing Fuses
BPR-H4 H4 10 BP-1963 Remotely Operated
BPR-L1 L1 10 BP-0823 Reserved Parking
BPR-L2 L2 10 BP-1041 Store Nothing In Front of Power Panels
BPR-L3 L3 10 BP-0261 Transformers In Parallel Possible Backfeed
BP-0262 Two Transformers Split Distribution
BP-0258 Two Way Feed
BP-1042 Underground Cable
Roll Wire Marker Dispenser BP-1101 Use Static Grounding Devices
BP-0658 WARNING: Machine is Automatically
Cat. No. Legend Rolls Controlled and May Start at Any Time
BPR-T1 T1 10 NOTICE
BPR-T2 T2 10 Color—Blue and Black on White
BPR-T3 T3 10 BP-0214 Authorized Personnel Only
BPR-CVS – 10 BP-1086 Emergency Power Shut-Off
BPR-GRS = 10 BP-1087 Main Power Disconnect Switch
BPR-PLS + 10 BP-0221 No Parking
BPR-MIN – 10 BP-0596 No Smoking
BPR-COL-YL YELLOW 10 BP-1495 Please Turn Out Light When Not In Use
BPR-COL-WT WHITE 10 BP-1904 Restricted Area Keep Out
BPR-COL-BK BLACK 10 BP-0998 Safety Glasses Required In This Area
BPR-COL-BK BLACK 10 BP-0228 Turn Out Lights
BPR-COL-BR BROWN 10 BP-0804 Visitors Parking
BPR-COL-OR ORANGE 10
BPR-COL-PL PURPLE 10 WARNING
BPR-COL-GY GRAY 10 Color—Red and Black on White
BPR-COL-BL BLUE 10 BP-1093 Disconnect Main Power Service Before
BPR-COL-GR GREEN 10 Servicing This Area
BPR-COL-RD RED 10 BP-1094 Not To Be Used For Electrical Work

WSS Laminated Tags


Std.
Cat. No. Tag Style Pkg. Quan.

WTAG- Standard Eyelet 5

WPTAG- Disposable Tag 25

Order by tag. WTAG-200 WTAG-201 WTAG-202 WTAG-203 WTAG-204 WTAG-205 WTAG-206 WTAG-207 WTAG-208 WTAG-209

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0222-03 4/28/06 3:26 PM Page 222

226-06

Portable Cable Splicing Kit Selection Chart


Contents of Cable Splicing Kit
1. Cold Shrink Splice Cover - An open-ended 3. Electrical-Grade Abrasive Cloth - For cable
tubular neoprene jacket pre-stretched onto jacket preparation.
a removable, collapsible core. 4. Cable Preparation Template.
2. Rubber Filler or Glass Cloth Electrical 5. Tube of 1711 Rubber Adhesive with
Tape - To separate and electrically insulate Applicator.
individual conductors. 6. Detailed Instruction Sheet.
Cable Cable Conductor Kit Packaging
Type Description Range Number Kits/Bag Kits/Ctn.
Single 2, 1, 1/0 8091-1T
1 10
Conductor Round 2/0, 3/0, 4/0 8091-2T

Twin Flat 6, 4, 3(W) 8092-1T 10


Type W & G 3(G), 2, 1(W) 8092-2T 1 10

Triple Flat 6, 4 8093-1T


Type G 3, 2, 1 8093-2T 1 10
1, 1/0, 2/0 8093-3T
Three 8, 6 8093-4T 10
Conductor 4 8093-5T 10 CONNECTOR
Round
Type
2
1
8093-6T
8093-7T
1
10
10
SELECTOR CHART
W&G 1/0, 2/0 8093-8T 5
Inline Connector
3/0, 4/0 8093-9T 5
Four 6 8094-1T 10
Conductor 4 8094-2T 10
Round 2 8094-3T 10
1
Type 1 8094-4T 10 Prod. Conductor Packaging
W&G 1/0, 2/0 8094-5T 5 No. Size (AWG) Conn./Ctn. Conn./Case
3/0, 4/0 8094-6T 5 15001 #10-12
15002 #8

Jacket Repair Kits 8090-16 And 15003


15004
#6
#4
50 500

8090-20 Selection Chart 15005 #3


15006 #2 25 250
Contents of Cable Splicing Kit
15007 #1
1. Neoprene wrap-around, 16" or 20" long. 5. Abrasive Strip. 15008 #1/0
2. Cable Repair Compound. 6. Protective Gloves. 15009 #2/0 10 100
3. Wooden Applicator. 7. Detailed Instruction Sheet. 15010 #3/0
4. Roll of 33 printed vinyl tape, 1-1/2" wide. 15011 #4/0
Cable Conductor Max. Cable Kit Length Packaging
Description Range O.D. No. of Boot Kits/Bag Kits/Ctn.
Parallel Connector
CABLE JACKET REPAIR
For all cables listed in 2.25 in. 8090-16 16 in. 1 10
the above chart 2.50 in. 8090-20 20 in. 1 10
COMPLETE SPLICE (ALL CONDUCTORS)
Up thru Three #6-1 2.25 in. 8090-16 16 in. 1 10 Prod. Conductor Packaging
No. Size (AWG) Conn./Ctn. Conn./Case
Conductor Round or Flat W or G #6-4/0 2.50 in. 8090-20 20 in. 1 10
PHASE CONNECTORS
PARTIAL SPLICE (DAMAGED CONDUCTORS ONLY)
17003 #6 200 200
Up thru Three #6-4/0 2.25 in. 8090-16 16 in. 1 10
17004 #4 200 200
Conductor Round or Flat W or G #6-250 kc mil 2.50 in. 8090-20 20 in. 1 10
17006 #3-2 100 100
Maximum Kit Length Packaging 17007 #1 100 100
Description Conduit O.D. No. of Boot Kits/Bag Kits/Ctn. GROUND CONNECTORS
FLEXIBLE CONDUIT REPAIR 17835 #10-8 500 500
Flexible 2.25 in. 8090-16 16 in. 1 10 17837 #8-6 500 500
Conduit 2.50 in. 8090-20 20 in. 1 10 17839 #6-4 500 500

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
225 4/28/06 3:27 PM Page 1

227-06

Scotchkote™
Electrical
Coating
Heavy-Duty Vinyl An electrical grade, fast-drying sealant and
bonding compound in a brush-top can. Gives
Electrical Tape No. 22 extra protection to splices where moisture and
corrosive conditions could cause problems.
A thicker (10 mil) tape designed for An excellent sealant for underground wire
applications where greater mechanical splices.
strength and abrasion resistance are required.
For heavy-duty jobs such as bus bar Can Contents Carton Case
insulation, harnessing, cable jacket repair, 15 fl. oz. / 442 ml 10 10
sealing transformer and circuit breaker
connections, and moisture protection on No. 33+
flexible conduit. Meets requirements of UL Vinyl Electrical Tape
510, ASTM D-2301 Type II and CSA (22.2).

Roll Size Roll Carton Case Flame retardant, cold and weather resistant,
7 mils. For applications in extremes of heat
3/4 in. x 36 yd. 1/Box 12 48
and cold. 33+ is designed to perform in a
continuous temperature environment of
105°C (221°F).

Wraps and conforms – even at 0°F (-18°C).


Resists ultraviolet, abrasion, moisture, alkalis,
acids and corrosion. Provides moisture-tight
electrical and mechanical protection with
minimum bulk. Use as primary electrical
insulation (especially in moisture and solvent
No. 35 Color Coded vapor areas) for all wire and cable splices up
Vinyl Electrical Tape to 600 volts, and for fixture wire splices up to
1000 volts. Provides an excellent abrasive-
Tape suited for color coding, phase resistant jacket for high-voltage cable splices
No. 88 identification, identifying motor leads, piping and terminations.
Vinyl Electrical Tape systems, marking safety areas, insulating
* Also available in a dispenser (No. 33D).
splices and terminations, and harnessing.
A flame-retardant, cold- and weather-resistant Resists abrasion, ultraviolet rays, moisture,
Roll Size Roll Carton Case
tape designed for special applications where alkalies, solvents and many acids. Flame
3/4 in. x 66 ft.* 1/Can 10 100
superior cold-weather resistance is judged retardant, cold and weather resistant. Holds
up well indoors and in weather-protected 3/4 in. x 44 ft. 1/Can 10 100
important. Its 8.5 mil thickness provides extra
outdoor color-coding applications, such as 3/4 in. x 20 ft. 10/Carton 10 100
electrical properties and quick insulation
buildup. Remains workable on cold days (can three-phase pad mounted transformers.
be applied at 0°F) and does not get gooey on Recommended for PVC and polyethylene-
hot days. The tough vinyl backing remains jacketed cables.* Tape colors are red, yellow,
remarkably conformable for easy application blue, white, green, orange, brown, gray and
on irregular surfaces – inside and outside – violet.
and resists abrasion, salt, alkalies, acids and * Do not use on neoprene-jacketed cable.
ultraviolet rays.
Roll Size Roll Carton Case
Roll Size Roll Carton Case 3/4 in. x 66 ft. 1/Can 10 100
3/4 in. x 66 ft. 1/Can 10 100 1/2 in. x 20 ft. 1/Cello Pk. 10 100

TODD MARINE ELECTRICAL SUPPLY


3411 Progress Road, Norfolk, VA 23502
3M Three M Ph: (757) 855-3111 or (800) 304-8633 • Fax: (757) 857-1665
www.toddmarine.net
PLEASE SEE OUR AD IN THE ADVERTISING SECTION
0224-04 4/28/06 3:28 PM Page 1

228-06

Multiple-Wire Identifier Kit


No. WI-116

A solid state tool


1. Attach calibrated leads
to conductors at remote
designed to help
location and identify
electricians "ring out"
each conductor.
wires and cables. It
allows the user to quickly
trace multiple conductor
runs, up to sixteen at a
time per designated
common. The system 2. Test each conductor at
eliminates the need for the central control panel
walkie-talkies and hand and determine to which
or voice signals. The WI-116 requires no power hook-up and remote location it leads.
can diagnose faulty conductors before the load is connected.

Ordering information
Kit No. Contents Kits/Ctn
MWD-16 Detector; CGB-16 Common Block; 3. Identify the conductor at
3 Test Leads; 16 Calibrated Leads; the central control panel.
WI-116 1
19 Insulated Alligator Clips;
and Shock-Resistant Carrying Case.

No. 27 Glass Cloth Electrical Tape


Meets requirements of
MIL-I-15126F; CSA.
A 7-mil tape with thermosetting, Performs at high temperature to
pressure-sensitive adhesive which provide heat-stable insulation for
performs at Class B temperatures hot-spot applications. Use No. 27
(130°C/266°F). Tape on furnace and oven controls,
motor leads and switches.
Roll Size Roll Carton Case
1/2 in. x 66 ft. 1/Box 10 50
3/4 in. x 66 ft. 1/Box 10 50

No. 69 Glass Cloth Electrical Tape


7.5-mil tape with thermosetting Use to secure non-PSA insulations
adhesive which performs at Class H such as asbestos & glass in high-
temperatures (180°C/366°F). temperature areas, and to splice
wire rated at 150°C, 180°C,
Roll Size Roll Carton Case 200°C SF and SFF. High tensile
1/2 in. x 66 ft. 1/Box 10 50 strength and heat resistant. Meets
3/4 in. x 66 ft. 1/Box 10 50 the requirements of MIL-I-79766C,
and has UL yellow card recognition
(Guide #OANZ2, File #E17385A).

www.manning-electric.com
Manning
Stocking Distributor for 3M Three M
3M Electrical Products

154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0227-05 4/28/06 3:29 PM Page 226

229-06

Connector Insulators 4 Insulating 2200, 2210 Vinyl Mastic Pads & Rolls
8420 Series Resin
A general-purpose,
two-part epoxy
insulating and
encapsulating resin,
packaged in Unipak Brand
Containers for exact mixing
A series of open-ended, tubular, prestretched EDPM ratios and convenience.
rubber sleeves which are factory assembled onto a Natural adhesive qualities and its compatibility with
removable, collapsible core. The core is removed
solid and synthetic cable insulations and sheaths make
when the tube has been positioned for installation,
Scotchcast 4 an excellent insulator and sealer for cable Self-fusing, rubber-based insulating compounds
such as over an in-line connection or terminal lug.
splicing. The mixed resin generates its own heat to laminated to a flexible, all-weather grade PVC backing.
No tools, torches or heat are required. The thick walls cure. No fire or outside heating process is needed. Both rolls and pads are resistant to abrasion, moisture,
resist puncture and damage. They resist acids, Outside contaminants and air cannot be stirred or alkalies, acid, copper corrosion, UV and varying
alkalies, ozone and ultraviolet light, and are not folded in during mixing. Because this resin is weather conditions. Temperature rating 176°F (80°C).
affected by moisture. These connector insulators seal
thermosetting, it will never melt or run once it cures; it Prod. Size Box
tightly, retain their resiliency and pressure after years
sets in about 30 minutes at 70°F. Can be used to
of aging and exposure and they are compatible with 2200 3.25 in. x 4.5 in. x 125 mils 10
all rubber and plastic cable insulation. They have a splice solid dielectric and oil-filled cables up to 8 KV
and to jacket high-voltage splices up to 69 KV. Flash Pads (83 x 114 mm)
90° C temperature rating and a 130°C emergency
overload capability. point: 300°F or over. 6.5 in. x 4.5 in. x 125 mils
(165 x 114 mm)
Use as primary electrical insulation for all solid Size Fl. Oz. Containers/Box
dielectric (rubber and plastic) insulated wire and cable 2210 4 in. x 10 ft. x 90 mils 1
A 3.2 1
splices rated up to 1000 volts; for physical protection Roll (102 mm x 3.05 m)
and moisture-sealing high-voltage connectors and B 7.4 1
lugs; for insulating secondary splices, copper or C 14.7 1
aluminum conductors; and for relocation of services,
dig-in and sheath repairs.
Relaxed PST Connector Insulators must overlap cable
insulation at least one inch for proper moisture seal.

Product* Conductor Min. Dia. Max. Dia.


Max. Conn.
Electrical Insulation Putty
No. Size** Range
AWG-kcmil
Over Cable
for Seal
Over Cable
or Conn.
Length Thermal Linerless
8424-7 #10 - 4 .10" (2.5mm) .39" (9.9mm) 3" All-Voltage Splicing Tape 130C
8425-7 #2 - 1/0 .39" (9.9mm) .70" (17.8mm) 3"
3M (up to 69KV)
8426-9 2/0 - 250 .51" (13.0mm) 1.00" (25.4mm) 5"
8426-11 2/0 - 250 .51" (13.0mm) 1.00" (25.4mm) 7" Three M
8427-12 250 - 400 .69" (17.5mm) 1.30" (33.0mm) 8"
8427-16 250 - 400 .69" (17.5mm) 1.30" (33.0mm) 12"
8428-12 500 - 800 .95" (24.1mm) 1.90" (48.3mm) 8"
8428-18 500 - 800 .95" (24.1mm) 1.90" (48.3mm) 14"
8429-18 1000 1.28"(32.5mm) 2.50" (63.5mm) 14"
Packed 1 each per bag, 10 each per carton.
*Number after dash indicates relaxed tube length.
**Important: Use insulation jacket or connector O.D. for final
ordering criteria.

A-2 Cable Preparation Kit

An electrical grade rubber-based, non-vulcanizing,


elastic-type putty in tape form. It is non-corrosive, has This linerless insulating tape provides consistent
excellent aging properties, will not dry out and applies performance without the bother and time loss inherent
cleanly without waste. It can be wrapped, stretched or with unwieldy liners. Non-vulcanizing 130C Tape is
based on ethylene propylene polymers (EPR). Its
molded around irregular shapes for quick, smooth
conformability and stretchability (up to 1000%) make
insulation buildup. Used to insulate low-voltage
for void-free, moisture-resistant insulation without loss
connections (up to 600 volts) and to build up cable of electrical characteristics. Tape is compatible with
splices and fill major irregularities and voids in low- all solid dielectric cable insulations and can be used
voltage splices (up to 2300 volts) to obtain a uniform on cables whose emergency overload temperatures
Reduce danger of electrical failure with this sealed, base for further taping.
easy-open, kit-in-a-can. Each kit contains enough can reach 130°C.
cleaning materials to prepare any normal synthetic Useful in rounding out high-voltage connections to Meets requirements of HH1-553C Grade A.
cable splice or termination. Three lint-free non-woven gear; smoothing bus bar irregularities; creating a resin
pads, saturated with trichloroethane, are sealed in dam in resin-pressure splices; creating a moisture seal Roll Size Roll Carton Case
each compact aluminum can. A strip of non- at ground wire exits in high-voltage splices; and in 3/4 in. x 30 ft. 1/Box 10 50
conductive 120-grit, closed-coat aluminum oxide is moisture-sealing multiconductor cable connections.
wrapped under the label on the exterior of each can. 1 in. x 30 ft. 1/Box 10 100
Roll Size Per Carton Per Case 1-1/2" x 30 ft. 1/Box 10 50
10 kits per Carton 50 kits per Case 1-1/2" x 60" x 1/8" 10 50 2 in. x 30 ft. 1/Box 10 50

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0227-03 4/28/06 3:30 PM Page 227

230-06

Self-Stripping Connectors
Electric Cable T-Tap

Wire Range/ Catalog Terms/ Terms/ Lbs/


Description Stud Size No box ctn ctn Mating Part

Standard .250
Female T-Tap 22-18 951 X 50 500 2.2
Tab-Male

18-14 952 X 50 500 2.2 —


Quick-Slide
12 953 X 50 500 2.2 —

Connector makes mid-span connection without stripping insulation.


Flag Quick-Slide mates with most .250" male blades.
Crimps with common pliers.

567 Tap Connectors splice all copper run wire 10 through 12 AWG and tap wire 14 through 18 AWG.
They feature a port window for visual wire positioning and are UL-rated for 600 volts and 105°C/220°F
maximum.
Wire Range AWG (Copper)
Number
Wire Range AWG (Copper) and Color Run Wire Tap Wire
Packing: Number
557, 558, 560 — 100 Connectors per box; 1,000 and Color Run Wire Tap Wire
Connectors per carton. 5,000 Connectors bulk 12 solid or 12 solid or
562
(500 per bag). 557 stranded; stranded;
Yellow
562, 567 — 100 Connectors per box; 1,000 Red 22, 20, 18 or 16 22, 20, 18 or 16 10 stranded 10 stranded
Connectors per carton; 1,000 Connectors, bin. 558 solid or stranded solid or stranded 564 18, 16 or 14 18, 16 or 14 solid
564 — 5,000 Connectors, bulk (500 per bag). Red White solid or stranded or stranded
These connectors are all UL-listed and 560 18 solid; or 16 or 18 solid; or 16 or 567 12 – 10 solid or 18, 16 or 14 solid
564, 560 and 567 are also CSA certified. Blue 14 solid or stranded 14 solid or stranded Brown stranded or stranded

Solderless Terminals – Ring Tongue


Catalog Terminals Per Carton
Wire Barrel
Max. (Add Pkg. Packaging Code Suffix
Range Stud Insul. Code When X K
(AWG) Size W C L E Thickness Length I.D. Dia. Ordering) (Boxed) (Bulk)
MULTI-STUD VINYL INSULATED BRAZED SEAM
22-
MV 18-610R
18 6-8-10 .35 .30 1.02 .75 .030 .25 .075 .145 100/500 1000
(B-60-402)
(red)
16-
MV 14-610R
14 6-8-10 .35 .30 1.02 .75 .030 .25 .095 .175 100/500 1000
(C-60-402)
(Blue)
12-
MV 10-610R
10 6-8-10 .39 .34 1.21 .89 .040 .25 .135 .255 50/500 500
(D-60-402)
(Yellow)
MULTI-STUD NYLON INSULATED WITH INSULATION GRIP
22-
MNG 18-610R
18 6-8-10 .35 .30 1.02 .75 .030 .25 .075 .145 — 1000
(B-60-502)
(Red)
16-
MNG 14-610R
14 6-8-10 .35 .30 1.02 .75 .030 .25 .095 .175 — 1000
(C-60-502)
(Blue)
12-
MNG 10-610R
10 6-8-10 .39 .34 1.21 .89 .040 .25 .135 .255 — 500
(D-60-502)
(Yellow)

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0228-03 4/28/06 3:31 PM Page 228

231-06

Products for Signal and Control Cable


Self-Stripping Electrical Pigtail 557 Connectors will pigtail-splice insulated copper wire conductors from 16 through 22 AWG.
and Tap Connectors 558 Connectors will tap-splice insulated copper conductors from 16 through 22 AWG.
Both types feature thermoplastic insulation and self-stripping double U-contacts.
U-contact, color-coded connectors
557 and 558 are UL-listed for 600 volts for building wire and 1,000 volts for fixtures
557 and signs. Both have 105°C/220°F temperature rating and both are compatible with all
common thermoplastic wire insulations. Use them on 600-volt control circuit wiring.
560, 562 Tap Connectors, constructed with thermoplastic insulators, will splice insulated
copper conductors from 10 through 18 AWG. (560s: 14 through 18 AWG; 562s: 10
558
through 12 AWG.) Their UL 600-volt pressure listing applies to tap connections only.
They make excellent connections without cutting branch (or run) wires. Hinged snap-
covers quickly insulate U-contacts. 560 has a 105°C/220°F temperature rating. The 562
rating is 90°C/194°F.
560
564 Tap Connectors make tap connections to wires 14 through 18 AWG in low-voltage
applications. They permit 4-way connections without cutting either wire. They also make
567 inline and pigtail connections. Temperature rating is 90°C/194°F. Use within the 14
through 18 AWG range.
562 564

Communications Connectors (for Pigtail Splicing)


UAL Connectors feature three enlarged ports, a strain relief system and indium plating.
UAL Use UALs for splicing two- or three-wire solid aluminum, 17 through 20 AWG; copper,
19 through 24 AWG; or combinations of these, with maximum insulation O.D. of .082 inch.
ULG Connectors are similar in design to UALs, but feature a tin-plated brass contact and
ULG can be used on copper conductors only. Enlarged ports make butt splicing easy on two-
or three-wire cable of solid 19 through 24 AWG. Maximum insulation O.D. of .082 inch.
UR Conductors handle 19 through 26 AWG solid copper wire. Use them to cut into
service in ready-access cases, pedestal mounts and for pigtail joints on cable splices.
Three-port construction makes them a perfect connector for general splicing or tapping
in load coils, such as toll cable splicing. Maximum insulation O.D. of .066 inch.
UR UY
UY Connectors are small and compact, with two ports designed for straight splicing.
The U-Contact design, combined with a clear plastic They accept two-wire copper conductor combinations of solid 22 through 26 AWG
body and protective sealant, allows the joining of solid
conductors without stripping the insulation. It also
with maximum insulation O.D. of .060 inch.
allows visual inspection. Packing: UAL and ULG – 100 Connectors per box; 1000 Connectors per carton
UR and UY – 100 Connectors per box; 1000 Connectors per carton;
20 Connectors per bag; 1000 Connectors per bin.

314 Self-Stripping Electrical Pigtail Connectors (Sealant-Filled) Flame Retardant


Product Wire CONN/ CONN/ LBS/
UPC Range box/bag ctn ctn
314
09230 50/box 500 5.5
Boxed 22-14
314 Solid &
09231 Stranded – 1000 9.5
Bin

314 connectors are sealant-filled which protects contact against


corrosion due to moisture.
Max. insulation dia. – .150"

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0229-03 4/28/06 3:31 PM Page 229

232-06

Fire Barrier Caulk CP 25


Fire Barrier Caulk CP 25 comes in 2 unique formulations: (1) CP 25S/L is a self-leveling sealant designed
for floor applications. (2) CP 25N/S is a no-sag sealant designed for wall and ceiling applications.
Fire Barrier Caulk CP 25 is a synthetic elastomer designed for use as one part fire, cold smoke, noxious gas
and water sealants. In addition, the unique intumescent property (expanding when heated) means that as
cable or pipe is consumed by fire, Fire Barrier expands to fill and hold the penetration closed. As little as
1/2" can effectively fire-stop the opening. CP 25 can be installed with a standard caulking gun or
Fire Barrier Self-Leveling Caulk hydraulic pumping system. Fire Barrier Caulk CP 25 bonds to concrete, metals, wood and cable jacketing.
No mixing is required and only minimal amounts necessary to fill the void need be used. No special
training or skills are needed to obtain excellent results.
UL Classified
Unit Value Carton
Tack free time Minutes <30 Product Size/ Fluid oz. Wt.
UPC Type of Pkg. (volume fill) Contents (lbs.)
Drying time Ambient 1/4" Bead (hr.) 72
Adhesion All substrates Good CP 25S/L Standard 10.5 12 Tubes 13.8
09491 Cartridge (19 cu. in.)
Shrinkage % volume ~ 50
Tube
Fire Barrier No-Sag Caulk Expansion X 10-15
CP 25S/L 5 Gallon 640/18.9 1 Pail 62.5
Color - Brown
09493 Pail (1150 cu. in.)
Density lb./gal. 12.5
Application Methods Caulking gun, CP 25N/S Standard 10.5 12 Tubes 13.8
pressurized 09123 Cartridge (19 cu. in.)
flow equipment Tube
Flow rate gms/min. @ 25 psig 130 CP 25N/S 1 Gallon 128/3.785 4 Gals. 50
1/4" orifice gms/min. @ 50 psig 600 09490 Can (231 cu. in.)
LOI % weight ~ 60 CP 25N/S 5 Gallon 640/18.9 1 Pail 62.5
Durometer Shore A 35-45 09122 Pail (1150 cu in.)

Contact Cleaner No. 1607


Penetrates, cleans and lubricates (contains some silicone). The high-pressure cleaning action of this
product quickly and thoroughly removes dust, dirt, grease and oxidation, penetrating the surface pores to
leave a fine silicone film to help protect against corrosion. Restores and maintains original electrical
values and constants when used as directed on switches and contacts, motor brushes and switches, meter
bases, disconnects, solenoids, rheostats, relays and tuners. Inhibits salt-spray corrosion, noise caused by
dust and dirt.
Product UPC Contents Net Weight Can Size Cans/Case
1607 09508 15 Fluid oz./443 ml 20-1/4 oz./574 grams 16 Fluid oz./473 ml 12

Contact Cleaner
Resin/Compounds
Re-enterable Electrical Insulating and Sealing Compound
Permanently jelly-like 2114 is a urethane formulation. Adheres well, yet pulls away cleanly
for fast, simple splice re-entry.
Yellow when poured, 2114 cures transparent so bundles and connectors are easily located
during re-entry. Its Unipak Container allows fast mixing of pre-measured portions and is
poured directly from the container. No mess. Cure time is about 20 minutes at 23°C/73°F and
80 minutes at –7°C/20°F. Re-entry can be
made at temperatures down to –26°C/ –15°F. Product Net. Wt. Packing
No. Size Oz./Gr. Type of Pkg. Per. Ctn.
Possessing great thermal stability, moisture- 1 Bag/Box
resistant 2114 is non-corrosive to copper C 12.3/350
1 Bag/Can
and does not support fungi or mold. It 2114
1 Bag/Box
10
No. 2114 Splice Re-Entry Compound contains no TDI or MOCA and has no D 21.2/600
1 Bag/Can
volatile isocyonate problem.

L.F. GAUBERT & CO., INC. Over 50 Years in Business


700 S. Broad St. - P. O. Box 50500 - New Orleans, LA 70150
Tel: 504-822-7272 • Fax: 504-821-9309 • Toll Free: 800-831-7534 MARINE, ELECTRICAL
AND
E-mail: sales@gaubertcable.com
www.gaubertcable.com INDUSTRIAL SUPPLIES
0238-04 4/28/06 3:32 PM Page 1

233-06

MR.LONGARM, INC.
NON-CONDUCTIVE BULB CHANGERS
Model #3003
BULB CHANGER
Bulb Changer
COMBO KITS
For incandescent bulbs
up to 200 watts. Model #0976
12 pack Includes interchangeable
Weight: 3.25 lbs. cups for flood, spot and
incandescent light bulbs.
2-Section extension pole
reaches up to 11.25 ft.
Heavy duty external locking
Model #3002 device allows pole to be
(“R” Type) locked at the right height.
Spotlight Changer Model #0974
For recessed ceiling bulbs. Includes interchangeable
12 pack cups for flood, spot and
Weight: 3.00 lbs. incandescent light bulbs.
3-Section extension pole
reaches up to 16.5 ft.
Heavy duty external locking
device allows pole to be
Model #3001
locked at the right height.
(“PAR” Type) Floodlight
Changer
0974
For security and accent
lighting bulbs.
12 pack 6708 7474 7476 EXTENSION POLES
Weight: 3.50 lbs. ‡
Non-conductive all fiberglass construction, heavy duty external
locking device. Nylar threaded end accepts lock clip included with
bulb changer and fits other tools such as paint rollers, etc.
Item Description Reach* Size** Metric Size**
Model #4003
6708 Heavy-Duty, Smooth Construction 12.75' 4.25' - 7.75' 1.3m - 2.3m
Heavy Duty Bulb
6712 Heavy-Duty, Smooth Construction 16.5' 6.25' - 11.5' 1.9m - 3.5m
Changer 6716 Heavy-Duty, Smooth Construction 20' 8' - 15' 2.4m - 4.6m
For long life fluorescent 7474 3-Section, Ribbed Construction 16.5' 4.75' - 11.5' 1.4m - 3.5m
and incandescent bulbs. 7476 2-Section, Ribbed Construction 11.25' 3.5' - 6' 1.0m - 1.9m
12 pack * Reach based on an average height user of 5’5”. ** Sizes are approximate.
Weight: 4.75 lbs. ‡ Will not conduct electricity (120/140 voltage) if not contaminated with moisture, water or other
conductive liquids.

HEAVY DUTY FLOOR SQUEEGEES


For removing water from decks, galleys and other flat
surfaces. Industrial strength frame made of 16 gauge plated
steel with a polycarbonate threaded adaptor. 7/32” x 2” black
Buna bend rubber is non-marking and resistant to most animal
and vegetable products, by-products and chemicals. The
frame may also be used as a light scraper when turned over.
Straight or curved styles available in 24” and 36” lengths.
Model #0260 #0260 24” Straight Floor Squeegee
#0262 36” Straight Floor Squeegee
Model #0261 #0261 24” Curved Floor Squeegee
#0263 36” Curved Floor Squeegee

400 Walnut, P.O. Box 377, Greenwood, MO 64034-0377 USA See our ad in the
1-800-821-3508 • 816-537-6777 • Fax: 816-537-6162 Advertising Section
Visit our website at: www.mrlongarm.com for more
E-mail: info@mrlongarm.com Mr.LongArm products
232 4/28/06 3:33 PM Page 232

234-06

OSRAM SYLVANIA

Bulb Shape Reference Guide


Incandescent Lamps
A Bulb designation consists of a letter(s) to
indicate the shape and a figure(s) to indicate
the approximate major diameter in eighths of
an inch. Bulbs are measured through their
greatest diameter in eighths of an inch. Thus,
an F-15 bulb is a flame-shape, 1-5/8 of an
inch or 1-7/8 inches in diameter. C-7 S-11 T PS A A-15-19 S BR R PAR-38 PAR-46 PAR-36

Filaments
A FILAMENT designation consists of a prefix
letter to indicate whether the wire is straight or
coiled, and a number to indicate the arrangement
of the filament on the supports. Prefix letters
include: C (coiled) – wire is wound into a helical
coil or it may be deeply fluted; CC (coiled coil) –
wire is wound into a helical coil and this coiled
CC-6 C-7A C-8 CC-8 C-9 C-11 C-13 C-17 C-22
wire again wound into a helical coil.

Bases
Typical screw base is shown. One lead-in
wire is soldered to the center contact and
the other soldered or welded to the upper
rim of the base shell. Base shells are Candelabra Double Contact Medium Medium 3 Kon-Tact Screw Comb. Screw Mogul Prefocus
typically made of brass or aluminum. Cand. Bayonet Skirted Med. Medium Terminal Terminals & Mog. Pf.
ANSI designations are in parentheses. (E12) Candelabra Med. Skt. (E26) 3 C Med. Scr. Term. Spade Connector
D.C. Bay (BA15D) (E26/50X39) (E26D)

Fluorescent Lamps T-5 MINI BIPIN


Compact Fluorescent Lamps:
All compact fluorescent lamp bases shown have
2 or 4 pins. The 2 pin lamps are designed for T-8 MEDIUM BIPIN
preheat operation, with lamps having an internal CIRCLINE
starter. The 4 pin lamps are dimmable and are
designed for electronic ballast operation; these T-12 MEDIUM BIPIN
lamps have no internal starter. DULUX EL lamps T-6 SINGLE PIN
have medium screw base and internal electronic
ballasts. They are not dimmable. DULUX S DULUX S/E G23 GX23 T-12 SINGLE PIN

High Intensity Discharge (HID) Lamps & Bases


A bulb designation consists of a letter
(s) to indicate the shape and figure (s)
to indicate the maximum diameter in
eighths of an inch. Thus, an ED17 is an
Ellipsoidal Shape, 1-7/8 of an inch or
2-1/8 inches in diameter. Mogul Medium
Mog. Med.
ED-17 E-17 E-25 BT-37 BT-56

I/O PAR lamps are suitable for indoor and outdoor use Not recommended for horizontal burning CP Candlepower
Symbols E This lamp meets minimum federal efficiency standards Do not insert in household sockets 200
MA Rating given at 200MA operation

This ECOLOGIC® was designed to pass


the Federal TCLP criteria for
▼ Burn base down to horizontal ★ Heat-resistant hard glass Burn any position

classification as non-hazardous waste in


most states. Check for local disposal
▼ Burn base down Heat-resistant hard glass PAP Do not burn in paper-lined sockets
regulations.
High color rendering lamp
• Indicates aluminum base New optical system, introduced 1998

Footnotes legend appears on the last page of this section.

Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
233 4/28/06 3:34 PM Page 233

235-06

OSRAM SYLVANIA

General Purpose Incandescent Lamps


Energy Vendor ID NO. Life
Used DCI 046135 Ordering Class Avg. Light Output
Nominal UPC 46135 Abbreviation Pkg. and Rated Approx.
Watts Bulb Base Item No. Except Volts Volts Qty. Description Fil. Hours Lumens L.C.L. M.O.L.

3 S-6 Cand. 16757 3S6/5 120 240 • Clear, Indicator B, C-7A 3000 10 17⁄8
6 S-6 Cand 16960 6S6/CL 120 120 • Clear, Indicator B, C-7A 1500 41 17⁄8
D.C. Bay 16782 6S6DC 120 120 Clear, Indicator B, C-9 1500 41 113⁄16
7 C-7 Cand. 13608 7C7 120 120 • Clear B, C-9 3000 43 21⁄8
13623 7C7/W 120 120 • Ceramic White B, C-9 3000 33 21⁄8
7 ⁄2
1
S-11 Med. 19353 71⁄2S 120 120 • Clear B, C-9 1400 47 1 ⁄16
9
21⁄4
19423 71⁄2S/CR 120 120 • Red Ceramic B, C-9 1400 19⁄16 21⁄4
19420 71⁄2S/CW 120 120 • White Ceramic B, C-9 1400 32 19⁄16 21⁄4
10 Cand. 13636 10C7/CL 120 240 • Pilot, Clear, B, C-7A 5000 38 21⁄8
Ruggedized1
12 S-6 Cand. 16718 12S6/250V 250 240 Clear, Indicator39 B, CC-7A 1500 61 17⁄8
This Is An Acceptable Substitute For 10S6/250V
15 A-15 Med. 10037 15A15 120 120 • Inside Frost B, C-9 2500 122 23⁄8 31⁄2
10018 15A15/CL 120 120 • Clear B, C-9 2500 122 23⁄8 31⁄2
T-7 D.C. Bay 18208 15T7DC 120 60 Clear 2, 39 B, C-7A 111 15⁄16 21⁄4
25 A-19 Med. 10449 25A 12 120 Inside Frost C, C-6 1000 385 21⁄2 315⁄16
10644 25A 120 120 • Inside Frost B, C-9 2500 190 21⁄2 315⁄16
10693 25A/CL 120 120 Clear B, C-9 2500 190 21⁄2 315⁄16
11090 25A/RS 120 120 • Inside Frost, B, C-17 1000 210 21⁄2 315⁄16
Rough Service
11092 25A/RS 125-130 120 • Inside Frost, B, C-17 1000 210 21⁄2 315⁄16
Rough Service
11710 25A/TB/RP 120 6 Transparent Blue B, C-9 3000 21⁄2 315⁄16
11714 25A/TG/RP 120 6 Transparent Green B, C-9 3000 21⁄2 315⁄16
11711 25A/TO/RP 120 6 Transparent Orange B, C-9 3000 21⁄2 315⁄16
11712 25A/TR/RP 120 6 Transparent Red B, C-9 3000 21⁄2 315⁄16
11713 25A/TY/RP 120 6 Transparent Yellow B, C-9 3000 21⁄2 315⁄16
25 A-19 Med. 11289 25A/277V 277 120 • Inside Frost B, C-17 1000 187 21⁄2 315⁄16
T-8 D.C. Bay 18310 25T8DC 120 60 Home Appliance, B, C-7A 1000 230 15⁄16 25⁄8
Clear 2
18316 25T8DC 130 60 Home Appliance, B, C-7A 1000 215 15⁄16 25⁄8
Clear 2
T-10 Med. 18510 25T10 120 60 • Clear B, C-8 1000 232 55⁄8
30 S-11 ▼D.C. Bay10765 30S11DC/75V 75 120 Train Marker C, C-7A 500 284 1 ⁄4
1
23⁄8
A-21 Kon-Tact 19385 30/100A/W/RP 120 12 • Soft White, Three- C, CC-8 1200 300 55⁄16
Med. Way, Universal 945
Burning26 1200
40 A-19 Med. 11010 40A/RP 120 24 • Inside Frost C, CC-8 1500 470 31⁄8 47⁄16
11060 40A/4/RP 120 48 Inside Frost C, CC-8 1500 470 31⁄8 47⁄16
11223 40A/CL/RP 120 24 • Clear C, CC-8 1500 480 31⁄8 47⁄16
10939 40A/DLSW/4PK/RP 120 48 Double LifeTM C, CC-8 3000 390 31⁄8 47⁄16
Soft White

Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.

Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
234 4/28/06 3:35 PM Page 1

236-06

OSRAM SYLVANIA

General Purpose Incandescent Lamps (continued)


Energy Vendor ID NO. Life
Used DCI 046135 Ordering Class Avg. Light Output
Nominal UPC 46135 Abbreviation Pkg. and Rated Approx.
Watts Bulb Base Item No. Except Volts Volts Qty. Description Fil. Hours Lumens L.C.L. M.O.L.

40 T-10 Med. 18650 40T10 120 60 • Clear B, C-3 1000 420 55⁄8
Showcase 18652 40T10 130 60 • Clear B, C-8 1000 420 55⁄8
Med 18494 40T10/lF/BL/6PK 120 6 • Inside Frost B, C-8 1000 420 55⁄8
18669 40T10/lF 130 60 • Inside Frost B, C-8 1000 415 55⁄8
50 A-19 Med. 11068 50A19/RS/75V 75 120 Train, l.F., C, C-9 1000 505 21⁄2 315⁄16
Rough Service4
14070 50A/RS/2/RP 120 24 I.F., Rough Service C, C-9 1000 480 21⁄2 315⁄16
11393 50A/RS/250V 250 120 • I.F., Rough Service C, C-22 1000 450 2 ⁄2
1
47⁄16
11428 50A/277V 277 120 • Inside Frost, Mine B, CC-7A 1000 475 21⁄2 47⁄16
50 A-21 ▼Kon- 18044 50/150A/DLSW/RP 120 12 • Double LifeTM C, CC-8 2400 540 33⁄8 55⁄16
100 150 Tact Med. Soft White 1400
Three-Way 1940
50 A-21 ▼Kon- 19404 50/250A/W/RP 120 12 • Soft White, C, CC-8 1200 640 33⁄8 515⁄16
200 250 Tact Med. Three-Way 3300
3940
50 PAR-36 Comb. 55118 50PAR36/CAP/NSP 12 12 ★ Narrow Spot, C, CC-8 4000 25000CP〈 6°^ 23⁄4
Screw Tungsten Halogen
Term. Capsylite® I/O 26, 40
and Spade Conn
60 A-19 Med. 11180 60A/4/RP 120 48 • Inside Frost C, CC-8 1000 870 31⁄8 47⁄16
10553 60A/CL 120 120 • Clear C, CC-8 1000 880 31⁄8 47⁄16
10390 60A/Y/RP 120 24 • Yellow Bug Light C, CC-8 1000 31⁄8 47⁄16
13000 60A/RS/RP 120 24 • Inside Frost C, C-9 1000 555 27⁄8 47⁄16
10503 60A/SL/RP 120 12 Safeline® C, C-9 1000 555 31⁄8 47⁄16
75 A-19 Med. 12500 75A/CL 120 120 • Clear C, CC-8 750 1200 31⁄8 47⁄16
11337 75A/DLSW/2PK/RP 120 24 • Double Life™ C, CC-8 1500 1055 31⁄8 47⁄16
12579 75A/RS/RP 120 12 • Inside Frost, C, C-9 1000 818 27⁄8 47⁄16
Rough Service
A-21 Med. 12554 75A21/RS/SL 120 48 • Inside Frost, C, C-9 1000 800 31⁄8 47⁄16
Rough Service
Safeline® Coated 24
90 PAR-38 Med. 14579 90PAR/CAP/SPL/FL 120 15 ★ Flood C, CC-8 2500 3500CP〈30°^ 55⁄16
Skt. E Tungsten Halogen 1310 lumens
Capsylite® I/O 26
E 14580 90PAR/CAP/SPL/SP 120 15 ★ Spot C, CC-8 2500 14300CP〈12°^ 55⁄16
Tungsten Halogen 1310 lumens
Capsylite® I/O 26
100 A-19 Med. 12750 100A/4/RP 120 48 • Inside Frost C, CC-8 750 1710 31⁄8 47⁄16
12529 100A/CL 120 120 • Clear C, CC-8 750 1720 31⁄8 47⁄16
12805 100A/DLSW/2PK/RP 120 24 • Double Life™ C, CC-8 1500 1530 31⁄8 47⁄16
Soft White
12763 100A/Y/RP 120 24 • Yellow Bug-lite C, CC-8 1000 31⁄8 47⁄16
12997 100A/RS/RP 120 12 • Inside Frost, C, C-9 1000 1260 27⁄8 47⁄16
A-21 Med. 13404 100A21/230V 230 24 • Inside Frost C, C-9 1000 1260 37⁄8 55⁄16
Med. 13397 100A21/277V 277 24 • Inside Frost, Mine C, C-7A 1000 1042 37⁄8 55⁄16
12992 100A21/RS/SL 120 24 Rough Service C, C-9 1000 1260 31⁄8 47⁄16
Safeline® 24
Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.

Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
235 4/28/06 3:36 PM Page 1

237-06

OSRAM SYLVANIA

General Purpose Incandescent Lamps (continued)


Energy Vendor ID NO. Life
Used DCI 046135 Ordering Class Avg. Light Output
Nominal UPC 46135 Abbreviation Pkg. and Rated Approx.
Watts Bulb Base Item No. Except Volts Volts Qty. Description Fil. Hours Lumens L.C.L. M.O.L.

100 PS-25 ▼3C Mog. 14374 100/300/RP 120 12 • Three-Way C, CC-8 1200 1385 41⁄4 63⁄4
200 300 Inside Frost 3540,4925

120 PAR-38 Med. E 14855 120PAR/CAP/SPL/FL 120 15 ★ Flood, C, CC-8 3000 4600CP〈30°^ 55⁄16
Skt. Tungsten Halogen 1800 lumens
Capsylite I/O 26
14856 120PAR/CAP/SPL/SP 120 15 ★ Narrow Spot, C, CC-8 3000 22500CP〈10°^ 55⁄16
E Tungsten Halogen 1800 lumens
Capsylite I/O 26
150 A-21 Med. 13125 150A21/CL/RP 120 12 • Clear C, CC-8 750 2780 37⁄8 55⁄16
PAR-46 Scr. Term. 15190 150PAR46 130 12 ★ CI., Mine Loco. C, C-13 1000 20000CP〈8 x 15°^ V x H 33⁄4
Head Lamp I/O
200 A-23 Med. 15505 200A23 120 48 • InsideFrost PAP C, CC-8 750 3930 45⁄8 63⁄16
PS-30 Med. 15820 200PS/CL/277V 277 60 • Clear C, C-9 1000 2360 6 81⁄16
250 R-40 Med. 14663 250R40/10 120 6 ★ Red Bowl Reflector C, CC-6 5000+ 67⁄8
Infrared12, 14, 15
Hard Glass
300 PAR-56 Mog. End 14947 300PAR56/NSP 120 12 ★ Narrow Spot9, 25 C, CC-13 2000 68000 CP〈8 x 10°^ VH 5
Prong
14950 300PAR56/MFL 12 ★ Medium Flood9, 25
120 C, CC-13 2000 24000 CP〈11 x 24°^VH 5
14953 300PAR56/WFL 12 ★ Wide Flood9, 25
120 C, CC-13 2000 11000 CP〈20 x 35°^VH 5
PS-30 Med. 15742 300M/CL 60 • Clear 120 C, C-9 750 5870 6 81⁄16
15737 300M/IF 120
60 • Inside Frost C, C-9 750 5860 6 81⁄16
PS-35 Mog. 15917 300PS35/CL 24 Clear, 130 C, C-9 1000 5250 7 93⁄8
Rough Service
16068 300PS35/CL/277V 277 24 Clear C, C-7A 1000 4220 7 93⁄8
BR-40 Reflector 14779 300BR/FL 120 24 Flood, Inside C, CC-2V 2000 2900CP〈60°† 61⁄2
Frost 6, 10, 14, 15 3030 lumens
120ER40 120 Volts Is An Energy Saving Product
500 PS-35 Mog. 16032 500P535/CL 120 24 Clear C, CC-8 1000 10000 7 93⁄8
16040 500/lF 130 24 Inside Frost C, CC-8 1000 10000 7 93⁄8

Footnotes for Incandescent Lamps


1. Indefinite long life. Designed for life in excess of 10,000 hours. In service life depends upon burning conditions.
2. Average laboratory life is 200 hours for vacuum cleaner and 600 hours for sewing machine services.
4. For diesel electric locomotives without voltage regulators.
6. May not give satisfactory performance if any accessory lighting equipment touches the glass bulb.
9. For use only with heat-resisting connector and with bulb supported by bulb rim or metal shell of base.
10. Should not be used in equipment where base temperature will exceed 500°F.
12. Designed for service other than illumination.
14. Burn only in porcelain sockets.
15. Should be shielded against moisture falling on bulb.
24. Operation of Lamp in any position other than base up may result in some loss of protective coating.
25. A protective shield should be used external to the lamp.
26. In base up operation, heat may eventually deteriorate paper-lined or plastic sockets.
39. Package quantity may change.
42. Incandescent lamps operated at less than rated voltage provide a lower light output, longer life, lower color temperature
and are less efficient in terms of lumens per watt.

Bulb shapes and symbols legends appear on the first page of this section.

Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
236 4/28/06 3:37 PM Page 1

238-06

OSRAM SYLVANIA

Preheat Fluorescent Lamps


MINIATURE PREHEAT LAMPS (Starter Required)
Vendor ID NO. Life Light Output
Nom- Nom- DCI 046135 Avg. Rated Approx.
inal inal UPC 46135 Lamp Pkg Hours Initial
Watts Bulb Lgth Base Item No. Ordering Abbreviation Qty. Description (21) Lumens(2)
4 T-5 6 Min. Bipin 20416 F4T5/CW 24 Cool White 6000 135
6 T-5 9 Min. Bipin 20616 F6T5/CW 24 Cool White 7500 270
20617 F6T5/WW 24 Warm White 7500 275
8 T-5 12 Min. Bipin 20816 F8T5/CW 24 Cool White 7500 390
20817 F8T5/WW 24 Warm White 7500 400
13 T-5 21 Min. Bipin 21316 F13T5/CW 24 Cool White 7500 860
21317 F13T5/WW 24 Warm White 7500 880

STANDARD PREHEAT LAMPS (Starter Required)


13 T-8 12 Med. Bipin 21766 F13T8/CW 24 Cool White 7500 530
14 T-8 15 Med. Bipin 21486 F14T8/CW 24 Cool White 7500 685
21488 F14T8/D 24 Daylight 7500 575
14 T-12 15 Med. Bipin 21409 F14T12/CW 30 Cool White 7500 650
21411 F14T12/D 30 Daylight 7500 590
21435 F14T12/WW 30 Warm White 7500 660
15 T-8 18 Med. Bipin 21616 F15T8/CW 24 Cool White 7500 825
21600 F15T8/D 24 Daylight 7500 700
21682 F15T8/N 24 Natural White 7500 560
21701 F15T8/WW 24 Warm White 7500 845
T-12 18 Med. Bipin 21532 F15T12/CW 30 Cool White 7500 750
21534 F15T12/D 30 Daylight 7500 660
21542 F15T12/WW 30 Warm White 7500 770
20 T-12 21 Med. Bipin 22251 F20T12/D35 (D735) 30 Designer® 3500K 9000 1300
22255 F20T12/D41 (D741) 30 Designer 4100K 9000 1300
22078 F20T12/CW 30 Cool White 9000 1200
22015 F20T12/CW 6PK 6 Cool White 9000 1200
22083 F20T12/D 30 Daylight 9000 1075
22131 F20T12/WW 30 Warm White 9000 1250
30 T-8 36 Med. Bipin 23116 F30T8/CW 24 Cool White 7500 2180
23100 F30T8/D 24 Daylight 7500 1850
23701 F30T8/WW 24 Warm White 7500 2150

Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.

Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
237 4/28/06 3:38 PM Page 1

239-06

OSRAM SYLVANIA

Instant Start Fluorescent Lamps


INSTANT START, SLIMLINE LAMPS (No Starter Required)
Vendor ID NO. Life Light Output
Nom- Nom- DCI 046135 Avg. Rated Approx.
inal inal UPC 46135 Lamp Pkg Hours Initial
Watts Bulb Lgth Base Item No. Ordering Abbreviation Qty. Description (21) Lumens(2)
25 T-6 42 Single Pin 24266 F42T6/CW 24 Cool White 7500
200
MA
1750
24270 F42T6/WW 24 Warm White 7500
200
MA
1825
38 T-6 64 Single Pin 26466 F64T6/CW 24 Cool White 7500
200
MA
2800
26470 F64T6/WW 24 Warm White 7500
200
MA
2900
39 T-12 48 Single Pin 24830 F48T12/CW/ECO 30 Cool White 9000 2820
24827 F48T12/CW/SS or F48T12/LW/SS Are Energy Saving Products
24834 F48T12/D 30 Daylight 9000 2450
55 T-12 72 Single Pin 27256 F72T12/CW 15 Cool White 8 12000 4500
27259 F72T12/D 15 Daylight8 12000 3800
60 T-12 96 Single Pin 29819 F96T12/D35/SS (D735) 15 Designer 3500K8, 15 SuperSaver ® 12000 5600
T-12 96 Single Pin 29824 F96T12/D41/SS (D741) 15 Designer® 4100K SuperSaver ® 12000 5600
29815 F96T12/CW/SS 15 Cool White8, 15 SuperSaver ® 12000 5300
29820 F96T12/LW/SS 15 Lite White 8, 15
SuperSaver ® 12000 5600
29817 F96T12/WW/SS 15 Warm White8, 15 SuperSaver ® 12000 5500
70 T-12 84 Single Pin 28417 F84T12/CW 15 Cool White8 12000 5300
75 T-12 96 Single Pin 29807 F96T12/D41 (D741) 15 Designer® 4100K8 12000 6420
F96T12/D35/SS Is An Energy Saving Product
29478 F96T12/CWX 15 Deluxe Cool White8 12000 4400
F96T12/D35/SS Is An Energy Saving Product
29500 F96T12/DX 15 Daylight Deluxe 8 12000 4360
F96T12/D35/SS Is An Energy Saving Product
4' RAPID START LAMPS Supersaver*
Nominal Avg Approx. Lumens
Nominal Length MOL Product Pkg Rated CCT Initial Mean Symbols &
Wattage Bulb (in.) (in.) Base Number Ordering Abbreviation Qty. Life (hrs) (K) CRI @25°C/77°F Footnotes
34 T12 48 47.78 Med Bipin 24535 F34/D30/SS/ECO 30 20000 3000 70 2800 2520 1,2,6,
formerly F40/D30/SS/ECO 43,44,45,46
24595 F34WW/SS 30 20000 3000 52 2750 2365 E 1,2,43,44,
formerly F40WW/SS 45, 46
24538 F34WW/SS/ECO 30 20000 3000 52 2750 2365 E 1,2,6,
formerly F40WW/SS/ECO 43,44,45,46
24591 F34W/SS 30 20000 3450 57 2750 2365 E 1,2,43,44,
formerly F40W/SS 45,46
24585 F34/D35/SS 30 20000 3500 70 2800 2520 E 1,2,43,
formerly F40/D35/SS 44,45,46
24540 F34/D35/SS/ECO 30 20000 3500 70 2800 2520 1,2,6,
formerly F40/D35/SS/ECO 43,44,45,46
24542 F34/D41/SS/ECO 30 20000 4100 70 2800 2520 1,2,6,
formerly F40/D41/SS/ECO 43,44,45,46
24588 F34CWX/SS 30 20000 4100 87 1925 1656 1,2,43,44,
formerly F40CWX/SS 45,46
24590 F34LW/SS 30 20000 4150 48 2825 2430 E 1,2,43,44,
formerly F40LW/SS 45,46
24566 F34LW/SS/ECO 30 20000 4150 48 2825 2430 E 1,2,6,
formerly F40LW/SS/ECO 43,44,45,46
24594 F34CW/SS 30 20000 4200 62 2650 2279 E 1,2,43,44,
formerly F40CW/SS 45,46
24596 F34CW/SS/ECO 30 20000 4200 62 2650 2279 E 1,2,6,
formerly F40CW/SS/ECO 43,44,45,46
24599 F34/DX/SS 30 20000 6500 88 1930 1565 1,2,43,44,
formerly F40/DX/SS 45,46
Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.

Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
238 4/28/06 3:39 PM Page 1

240-06

OSRAM SYLVANIA

Instant Start Fluorescent Lamps (continued)


4' RAPID START LAMPS Supersaver*
Nominal Avg Approx. Lumens
Nominal Length MOL Product Pkg Rated CCT Initial Mean Symbols &
Wattage Bulb (in.) (in.) Base Number Ordering Abbreviation Qty. Life (hrs) (K) CRI @25°C/77°F Footnotes
40 T12 48 47.78 Med Bipin 24521 F34/D30/ECO 30 20000 3000 70 3200 2880 E 1,2,
6,8,43,44,46,47
24537 F40/D35/ECO 30 20000 3500 70 3200 2880 E 1,2,
6,8,43,44,46, 47
24438 F40N 30 20000 3600 86 2100 1806 1,2,8,
43,44,46,47
24584 F40/D41 30 20000 4100 70 3200 2880 E 1,2,8,
43,44,46,47
24541 F40/D41/ECO 30 20000 4100 70 3200 2880 E 1,2,
6,8,43,44,46,47
24442 F40CWX 10 20000 4100 87 2150 1849 1,2,8,
43,44,46,47
24441 F40CWX 30 20000 4100 87 2150 1849 1,2,8,
43,44,46,47
24477 F40/DX 30 20000 6500 88 2180 1770 1,2,8,
43,44,46,47

Compact Fluorescent Lamps


DULUX® S Preheat – 2 Pin-Starter in Lamp Base – ECOLOGIC34, 37
Vendor ID NO. Life Light Output
Nom- DCI 046135 NEMA Avg. Rated Approx.
inal UPC 46135 Lamp Generic Pkg. Hours Initial
Watts Bulb MOL (mm) Base Item No. Ordering Abbreviation Designation Qty. Description (21) Lumens(2)
5 T-4 4.2(107) G23 20325 CF5DS/827 CFT5W/G23/827 50 Compact Fluor. 2700K, 82 CRI 10000 230
7 T-4 5.3(135) G23 20327 CF7DS/827 CFT7W/G23/827 50 Compact Fluor. 2700K, 82 CRI 10000 400
9 T-4 6.5(165) G23 20329 CF9DS/827 CFT9W/G23/827 50 Compact Fluor. 2700K, 82 CRI 10000 580
13 T-4 7.1(180) GX23 20331 CF13DS/827 CFT13W/GX23/827 50 Compact Fluor. 2700K, 82 CRI 10000 820

DULUX® S/E – 4 Pin For Dimming and Electronic Ballasts35


5 T-4 3.4(85) 2G7 20311 CF5DS/E/827 CFT5W/2G7/827 50 Compact Fluor. 2700K, 82 CRI 10000 230
7 T-4 4.5(115) 2G7 20312 CF7DS/E/827 CFT7W/2G7/827 50 Compact Fluor. 2700K, 82 CRI 10000 400
9 T-4 5.7(145) 2G7 20313 CF9DS/E/827 CFT9W/2G7/827 50 Compact Fluor. 2700K, 82 CRI 10000 580
13 T-4 6.2(157) 2GX7 20314 CF13DS/E/827 CFT13W/2GX7/827 50 Compact Fluor. 2700K, 82 CRI 10000 820

CIRCLINE, RAPID START LAMPS (Diameter is measured from outside of bulb)


20 T-9 6.5 4-Pin 20156 FC6T9/CW/RS 12 Cool White3 8000 750
20155 FC6T9/WW/RS 12 Warm White3 8000 800
22 T-9 8 4-Pin 20148 FC8T9/CW/RS 12 Cool White3 12000 1050
20080 FC8T9/D/RS 12 Daylight3 12000 900
20088 FC8T9/WW/RS 12 Warm White3 12000 1050
32 T-9 12 4-Pin 20233 FC12T9/DWW/RP 6 Deluxe Warm White Retail Pack3 15000 2100
20142 FC12T9/CW/RS 12 Cool White3 15000 1925
20030 FC12T9/D/RS 12 Daylight3 15000 1650
20037 FC12T9/WW/RS 12 Warm White3 15000 1950
40 T-9 16 4-Pin 20132 FC16T9/CW/RS 12 Cool White3 18000 2750
20072 FC16T9/D/RS 12 Daylight3 18000 2350
20057 FC16T9/WW/RS 12 Warm White3 18000 2800

Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.

Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
238 A 4/28/06 3:40 PM Page 642

241-06

OSRAM SYLVANIA
Electronic – Self-Ballasted – Medium Screw Base Lamps Dulux EL ®

Item No. Ordering Abbreviation Package Bulb type Replaced Nominal Nominal Color CRI Avg. Rated
Incand. Watt. Wattage Lumens Temperature Life (hrs.)
29451 CF7EL/MINITWIST/2700K 1/box, 6/cs Mini Twist 25 7 375 2700K 82 8000
29379 CF7EL/MINITWIST/1 1/box, 6/cs Mini Twist 25 7 375 3000K 82 8000
29371 CF7EL/MINITWIST/BL/1 1/blister, 6/cs Mini Twist 25 7 375 3000K 82 8000
29378 CF11EL/MINITWIST/1 1/box, 6/cs Mini Twist 40 11 600 3000K 82 8000
29364 CF11EL/MINITWIST/BL/1 1/blister, 6/cs Mini Twist 40 11 600 3000K 82 8000
29409 CF13EL/MINITWIST/2700K 1/box, 6/cs Mini Twist 60 13 800 2700K 82 10,000
29376 CF13EL/MINITWIST/1 1/box, 6/cs MIni Twist 60 13 800 3000K 82 8000
29116 CF13EL/MINITWIST/BL/1 1/blister, 6/cs Mini Twist 60 13 800 3000K 82 8000
29151 CF13ELMINITWIST/DAY 1/box, 6/cs Mini Twist 60 13 800 3500K 82 8000
29169 CF13EL/MINITWIST/DAY/BL/1 1/blister, 6/cs Mini Twist 60 13 800 3500K 82 8000
29410 CF19EL/MINITWIST/2700K 1/box, 6/cs Mini Twist 75 19 1200 2700K 82 10,000
29396 CF19EL/MINITWIST 1/box, 6/cs Mini Twist 75 19 1200 3000K 82 8000
29347 CF19EL/MINITWIST/BL/1 1/blister, 5/cs Mini Twist 75 19 1200 3000K 82 8000
29367 CF19EL/MINITWIST/DAY/BL/1 1/blister, 5/cs Mini Twist 75 19 1200 3500K 82 8000
29411 CF23EL/MINITWIST/2700K 1/box, 6/cs Mini Twist 100 23 1600 2700K 82 10,000
29397 CF23EL/MINITWIST 1/box, 6/cs Mini Twist 100 23 1600 3000K 82 8000
29394 CF23EL/MINITWIST/BL/1 1/blister, 5/cs Mini Twist 100 23 1600 3000K 82 8000
29417 CF23EL/MINITWIST/DAY/BL/1 1/blister, 5/cs Mini Twist 100 23 1600 3500K 82 8000
29286 CF15EL/TWIST 1/box, 6/cs Twist 60 15 850 3000K 82 10,000
29289 CF15EL/TWIST/1/BL 1/blister, 6/cs Twist 60 15 850 3000K 82 10,000
29287 CF20EL/TWIST 1/box, 6/cs Twist 75 20 1200 3000K 82 10,000
29290 CF20EL/TWIST/1/BL 1/blister, 6/cs Twist 75 20 1200 3000K 82 10,000
29288 CF23EL/TWIST 1/box, 6/cs Twist 90 23 1450 3000K 82 10,000
29291 CF23EL/TWIST/1/BL 1/blister, 6/cs Twist 90 23 1450 3000K 82 10,000
29412 CF27EL/TWIST/2700K 1/box. 6/cs Twist 100 27 1750 2700K 82 10,000
29390 CF27EL/TWIST 1/box, 6/cs Twist 100 27 1750 3000K 82 10,000
29370 CF27EL/TWIST/DAY/1/BL 1/blister, 6/cs Twist 100 27 1750 3500K 82 10,000
29353 CF27EL/TWIST/5000K 1/box, 6/cs Twist 100 27 1750 5000K 82 8000
29415 CF30EL/TWIST/2700K 1/box, 6/cs Twist 100 30 2000 2700K 82 6000
29395 CF30EL/TWIST 1/box. 6/cs Twist 100 30 2000 3000K 82 6000
29392 CF30EL/TWIST/1/BL 1/blister, 5/cs Twist 100 30 2000 3000K 82 6000
29147 CF40EL/TWIST/2700K 1/box, 6/cs Twist 150 40 2600 2700K 82 8000
29481 CF40EL/TWIST/1BL 1/blister, 10/cs Twist 150 40 2600 3000K 82 6000
29523 CF28EL/3WAY/TWIST/2700K 1/box, 6/cs Twist 30 12 600 2700K 82 6000
Twist 70 19 1100 2700K 82 6000
Twist 100 28 1800 2700K 82 6000
29351 CF28EL/3WAY/TWIST/1 1/box, 6/cs Twist 30 12 600 3000K 82 6000
Twist 70 19 1100 3000K 82 6000
Twist 100 28 1800 3000K 82 6000
29349 CF28EL/3WAY/TWIST/1/BL 1/blister, 5/cs Twist 30 12 600 3000K 82 6000
Twist 70 19 1100 3000K 82 6000
Twist 100 28 1800 3000K 82 6000
29468 CF14EL/A19 1/blister, 6/cs A 60 14 800 3000K 82 6000
29485 CF14EL/A19/3K/BL 1/blister, 6/cs A 60 14 800 3000K 82 8000
29196 CF15EL/B/830/MED 1/box, 6/cs B20 60 15 700 3000K 82 6000
29307 CF15EL/830/MED/1 1/box, 6/cs T4 60 15 850 3000K 82 10,000
29308 CF20EL/830/MED/1 1/box, 6/cs T4 75 20 1200 3000K 82 10,000
29310 CF23EL/830/MED/1 1/box, 6/cs T4 90 23 1450 3000K 82 10,000
29495 CF9EL/G25/3K/1/BL 1/blister, 6/cs G25 40 9 495 3000K 82 8000
29414 CF11EL/G25/2700K 1/box, 6/cs G25 40 11 450 2700K 82 6000
29195 CF15EL/G/830/MED 1/box, 6/cs G30 60 15 700 3000K 82 6000
29278 CF15EL/G/830/MED/1/BL 1/blister, 6/cs G30 60 15 700 3000K 82 6000
29533 CFEL15W/G30/5000K3 1/box, 6/cs G30 60 15 700 5000K 82 6000
29121 CF4EL/DECO/CANDELABRA/1/BL 1/blister, 6/cs FLAME 15 4 160 3000K 82 6000
29167 CF7EL/DECO/MEDIUM/1/BL 1/blister, 6/cs FLAME 25 7 280 3000K 82 6000
29346 CF14EL/A19/1/BL/Yellow – – n/a 14 475 _ 82 6000
29294 CF30EL/CIRC/830/MED 1/box, 6/cs dia. 8" 100 30 1800 3000K 82 10,000
29465 CF15ELBR30/DIMMABLE/2700K 1/box, 6/cs BR30 65 15 600 2700K 82 6000
29413 CF15EL/BR30/2700K 1/box, 6/cs BR30 65 15 560 2700K 82 6000
29352 CF15EL/BR30/FROST 1/box, 6/cs BR30 65 15 560 3000K 82 6000
29331 CF15EL/BR30/FROST/1/BL 1/blister, 5/cs BR30 65 15 560 3000K 82 6000
29366 CF15EL/BR30/DAY/1/BL 1/blister, 5/cs BR30 65 15 560 3500K 82 6000
29399 CF20EL/BR40/2700K 1/box, 6/cs BR40 75 20 900 2700K 82 8000
29539 CF15EL/BR30/5000K3 1/box, 6/cs BR30 65 15 560 2700K 82 6000
29359 CF22EL/PAR38/2700K 1/box, 6/cs PAR38 75 22 950 2700K 82 6000

Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
239 4/28/06 3:41 PM Page 1

242-06

OSRAM SYLVANIA

High Intensity Discharge (HID) Lamps


COMPACT METALARC® (Enclosed Fixtures Only) Reduced outer jacket metal halide.
Vendor ID NO. Life
DCI 046135 ANSI Avg. Approx. Color Corr.
UPC 46135 Ordering Spec. Pkg. Rated Lumens Rend. Color
Watts Bulb Base Item No. Abbreviation Number Qty. Description Hours Initial Mean* Index Temp.
175 ED-17 Med. 64479 M175/U/MED M57ZL 20 Clear, Univ. 10000V 14400V 10800V 65 4000K
Burn10 7500H 12800H 9300H
64480 M175/C/U/MED M57ZL 20 Coated, Univ. 10000V 13000V 10000V 70 3600K
METALARC SUPERSAVER ® Burn10 7500H 11080H 8400H
950 BT-56 Mogul 64850 M950/SS/U/BT56** M47/E Clear, Univ. 18000V 103000V 80000V 85 4000K
12000H 90000V 64000H
**For lamp wattages of 360W and greater, it is recommended that lamp holders with nickel plated copper alloy center contacts (w/springs) be used.
STANDARD METALARC (Enclosed Fixtures Only) General lighting metal halide.
®

M1000/U, M1000/C/U, operated vertically within 15°, may be operated in OPEN fixtures.
1000 BT-37 Mogul 64469 M1000/U/BT-37 M47ZC 6 Clear, Univ. 15000V 110000V 96000V 65 3800K
9000H 107800H 86300H
1000 BT-56 Mogul 64468 M1000/U M47GH 6 Clear, Univ. 18000V 110000V 86000V 65 4000K
Burn13 12000H 107800H 86300H
64470 M1000/C/U M47GH 6 Coated, Univ. 18000V 107000V 80000V 70 3400K
Burn13 12000H 101600H 80700H
1500 BT-56 Mogul 64431 M1500/BU-HOR M48GH 6 Clear, Base-Up 3000 170000V 140000V 70 4000K
to Horiz.10, 24, 25 153000H
64432 M1500/BD M48GH 6 Clear, Base Down 3000 155000H 140000 70 4000K
* In actual applications on a CWA ballast the mean lumens will be higher. within 15° Only4, 10 167000V

STANDARD LUMALUX® General lighting high pressure sodium.


Vendor ID NO. Life
DCI 046135 ANSI Avg. Approx.
UPC 46135 Ordering Spec. Pkg. Rated Lumens
Watts Bulb Base Item No. Abbreviation Number Qty. Description Hours Initial Mean L.C.L. M.O.L.

50 E-17 Med. 67502 LU50/MED S68ZL 20 Clear 24000+ 4000 3600 3 ⁄16
7
57⁄16
67503 LU50/D/MED S68ZL 20 Coated6 24000+ 3700 3420 37⁄16 57⁄16
100 E-17 Med. 67506 LU100/MED S54ZL 20 Clear 24000+ 9500 8000 37⁄16 57⁄16
67507 LU100/D/MED S54ZL 20 Coated6 24000+ 8800 7500 37⁄16 57⁄16
150 E-17 Med. 67508 LU150/MED S55ZL 20 Clear, 55 Volt 24000+ 15800 13400 39⁄16 511⁄16
67509 LU150/D/MED S55ZL 20 Coated, 55 Volt 6 24000+ 14500 12300 39⁄16 511⁄16
1000 E-25 Mog 67307 LU1000 S52XB 6 Clear14 24000+ 130000 124000 83⁄4 151⁄16

STANDARD MERCURY Lamps


100 ED-17 Med. 69403 H38AV-100/DX H38ZL 20 Brite White Deluxe 24000+ 4000 3560 33⁄4 57⁄16
Bulb shapes and symbols legends appear on the first page of this section.
Footnotes
Fluorescent Lamps 34. Minimum starting temperature: CF5:-22F; CF7:-4F; CF9: 14F; CF13DS: 14F; 47. 40W Rapid Start lamps may be used in starter operated fixtures designed for
1. Approximate initial lumens after 100 hours operation. CF13DD:-4F; CF18DD: 5F; CF18DT:-4F; CF26: 14F 40W preheat lamps. Life rating for preheat service is approximately 15,000 hours
2. The life ratings of fluorescent lamps are based on 3-hr. burning cycles under 35. Minimum starting temperature is a function of the ballast, consult the ballast average.
specified conditions and with ballast meeting ANSI specs. If burning cycle is manufacturer. Some are rated for 0 F and others are 50 F.
increased, there will be a corresponding increase in the average hours life. 37. 2 pin CF lamps should never be installed in 4 pin sockets,even if lamp will fit.
3. Ratings for Circline lamps are based on operation in Rapid Start circuits. They 43. Average rated life is measured at 3 hrs. per start on 2-lamp, rapid start magnetic
will also operate on preheat circuits. ballasts per IES recommended practice. Lamp life on single-lamp rapid start High Intensity Discharge (HID) Lamps
6. Sylvania Ecologic® fluorescent lamps are designed to pass the Federal Toxic ballasts may be reduced. 4. Lamps must be operated within 15° of vertical.
Characteristic Leaching Procedure (TCLP) criteria for classification as non- 44. Average life rating at 12 hours operation per start is 28,800 hours. 6. For use where glare is a problem.
hazardous waste in most states. Disposal regulations may vary. 45. Recommended for use on 1- or 2-lamp 40 watt rapid start, high power factor, 10. OPERATE IN ENCLOSED FIXTURES ONLY which comply with ULStandard 1572
8. Average life rating at 12 hours burning per start is 18,000 hours. lead, indoor ballasts that meet ANSI standards. Not intended for use: (1) at lamp revised 12/88. Refer tofixture manufacturer data for compliance.
15. Recommended for use on one or two lamp high power factor, lead, instant-start, ambient temperatures below 60°F or in drafty locations, (2) on low power factor 13. May be operated in open fixture if operated within 15° of vertical.
indoor ballasts that meet ANSI standards. Not intended for use: (1) at lamp ballasts, (3) reduced current/reduced light output ballasts, (4) dimming ballasts, 14. Use with 5000V pulse rated sockets only.
ambient temperatures below 60°F or in drafty locations, (2) on low power factor or (5) on inverter operated emergency lighting systems unless any of the above 24. Published lumens for base-up position; lumens will be lower for all other
ballasts, (3) reduced current/reduced light output ballasts, (4) dimming ballasts, equipment is specifically listed for use with 34 watt lamps. positions, including horizontal.
or (5) on inverter operated emergency lighting systems unless equipment is 46. The “RS” designation has been eliminated to simplify the ordering abbreviation. 25. Lumens BU at 45°: Initial 150000; Mean 129000.
specifically listed for use with 32 watt or 60 watt lamps.

Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
0239-04 4/28/06 3:42 PM Page 1

243-06

STEWART R. BROWNE MFG. CO., INC.

Industrial Flashlights Grounding Clamp


Permissible Safety Models Model 2178
Designed for wharf bonding of tank
Model F10X 2 cell polypropylene case barges and vessels and as a grounding
UL listed – Class I, Group C & D connection for electric welders.
Class II, Group G Size – 2” x 3”
Model F30X 3 cell polypropylene case Material – bronze
UL listed – Class I, Group C & D Point – Replaceable carboloy.
Model F81X 2 cell Tuffite case, rear cap & Model 2178-IP – Isolated point
spare bulb holder. for use in electrical ground
Model F81XUSY (NSN-6230-00-299-3035) control systems.
Mil-F-3747E. UL listed – Class I, Group C & D
3 cell Tuffite case, rear cap & spare

PORTABLE EXPLOSIONPROOF LIGHTS


Explosionproof Fluorescent Light
26 watt twin tube lamp Explosionproof
Headlight

Model HL-X
Model XP87B
HL-X Headlite is UL & cUL listed for use in Class I, Division 1,
UL & cUL listed for Class I, Div. 1, Group C & D Group C & D hazardous locations. The light with its adjustable
Class II, Div. 1, Group F & G. strap easily mounts on a hardhat or can comfortably fit on a
• No exposed metal parts worker’s head as a hands-free safety light for confined space entry.
• Non-metallic guard and handle assembly of Zytel 801 ST • Lamp housing swivels 45° to aim light directly on the job
• Watertight • Operates approx. 4 hours
• Tempered glass globe • Weight 7.6 oz. (w/4 alkaline batteries)*
• 26 watt twin tube compact fluorescent lamp with starter • Chemically resistant case & lens
• 125 volt rated ballast designed to operate on 50 or 60 Hz with • Padded for user comfort
recyclable thermal protection
• 1800 lumens *Batteries not included with light
Dimensions: Length – 23-1/2”
Diameter – 4”
Weight – 3-1/2 lbs
Explosionproof Watertight
Portable Hand Lamp

Model XP162
Explosionproof UL & cUL listed for all Class I, Div. 1, Group C & D locations.
Flood Light Completely watertight. Can be used safely in any moisture
Model XP1530 condition. Can be equipped with a transformer for 12-volt
150 or 300 watt operation meeting OSHA Section 1926.401(J) (4). Tuffite handle
(specify when ordering.) and globe holder designed for chemical resistance, high impact
Stand included. strength and lightweight service. Guard of high impact aluminum
UL listed – Class I, alloy; non-sparking swivel hook. Light can be equipped to handle
Div. 1, Group C & D 16/3 or 14/3 cable. Accepts A-21, 100 watt rough service bulb.
Dimensions: Length – 12” One-piece socket construction can withstand up to 360° in service.
Height – 16” Dimensions: Length – 18-1/2”
Weight – 19 lbs. Diameter – 5”
Weight – 4 lbs.

Stewart R. Browne Mfg. Co., Inc.


1165 Hightower Trail
Atlanta, Georgia 30350
Tel: (770) 993-9600 E-Mail: info@srbrowne.com
Safety Equipment Specialists
to Industry . . . Since 1918 Fax: (770) 594-7758 Website: http://www.srbrowne.com
240 4/28/06 3:44 PM Page 242

244-06

BRIGHT STAR LIGHTING PRODUCTS


FLASHLIGHTS
TYPE 1 APPROVED FOR NON-HAZARDOUS AREAS
Model # 1925**
3-cell, D flashlight complies with ASTM F-1014-92, Type I
◆ 3-way switch (off-flash-on) with switch guard
◆ Ring hanger
◆ Waterproof
ASTM Type I approved for NON-HAZARDOUS AREAS **Tested and found acceptable by U.K. Dept. of Trade for survival crafts MS3 3/26/026

ANTI-STATIC WATERPROOF SAFETY FLASHLIGHT WITH LENS RING LOCK


2317C (2 D-cell) safety flashlight complies with ATEX specifications for use in Cat 2 (Zone 1) hazardous locations.

Key-Lock: to prevent Switch: waterproof, three-way Anti-Static: molded of high


opening of flashlight by (off-flash-on) – equipped with impact black plastic with anti-
unauthorized personnel switch guard static properties to avoid the
– special key provided danger of ignition due to
electrostatic discharges

Lens: waterproof, Case: one piece, waterproof, Ring Hanger: for convenient
unbreakable safety lens embossed with official storage off-floor, or for
certificate data attaching to belt, etc.

ATEX Safety Listed


Impact Tested: at temperatures from -20° C to +50° C (-4° F to +122° F)
Explosion Protection: increased safety “e”
intrinsic safety “i” SUBMERSIBLE LED HEADLAMP
• Lasts up to 50 hours with 4 AA
alkaline batteries
FLASHLIGHT Model 19202 • Bright white LED light
Specifications Product Features for close-up viewing
Power Source: 2 AA Cell Alkaline • Weather Resistant
Bulb/Lamp: Xenon Z2M Bulb • UL Division 2 Listed
Module • Non Conductive Swivel head
Bulb/Lamp Life: 20 Hours • 10,000 Candle Power Features:
Light Output: 10,000 Beam Xenon Bulb Module UL Division 2 Listed
Candlepower • Multiple Clips for easy use for Hazardous Locations
Weight (without batteries): • 30 Hour Bulb CSA and MSHA listed
1.58 oz.(.045 kg) • Pre-focused spot beam Rotate lens to focus spot
Replacement Bulb: Z2M #21410 Submersible to 100 feet
Battery Voltage: 3V
Battery Life: 2-5 hrs. (approx.) Specifications:
Batteries: 4 AA Alkaline (6 volt)
Safety Approvals Unit Dimensions Bulb: White LED in a standard PR base
UL: Class I, Division 2, Group Length: 4.25 in. (10.79 cm) Bulb life: 10,000 hours
A,B,C,D Width: 1.75 in. (4.45 cm) at body LED Replacement Bulb: LEDPR4
Operating Temp Code: T3C Height: N/A Model#
CSA: Class I, Division 2, Group 200802 yellow with cloth strap
A,B,C,D 200803 black with cloth strap
Class II, Division 2, Group G 200902 yellow with rubber strap
Operating Temp Code: T3C 200903 black with rubber strap

380 Stewart Road


Hanover Twp., PA 18706
Responder Ph: 570-825-1900 • Fax: 570-825-1984
800-631-3814
www.flashlight.com
E-mail: sales@flashlight.com
241 4/28/06 3:45 PM Page 243

245-06

BRIGHT STAR LIGHTING PRODUCTS


2,000,000 CANDLEPOWER SPOTLIGHTS
Rechargeable Spotlight
RC-3800 Rechargeable spotlight with 110V AC charger & 12V DC
charger/adapter
Recharge from either 110V or 12V sources (220V also available).
Will operate from 12V DC power source. Features parabolic machined
reflectors with Hyper halogen bulb, patented pistol grip trigger switch
with momentary / lock-on feature, high impact polypropylene housing
and built-in hanging loop for storage. Supplied complete with 12V DC
XL-1800C charger/adapter and 110V AC charger, mounting threads for optional
mount and tabs for optional shoulder strap.
2,000,000 candlepower spotlight beam is 40 times brighter than auto
headlights. Beam will carry over one mile. Operates up to 20 continuous
minutes on one charge. 1,000,000-candlepower spotlights are also
available in rechargeable and 12V models.

12 Volt Spotlights
RC-3800
XL-1800C 12V spotlight with 10 ft. cord
Portable Power Packs
RBP-1270 7 Ampere hour battery pack with 110V charger for
MM-2 12V non-rechargeable spotlights
Swivel Mount
Three-way adjustable, weatherproof mounts. Magnetic base.
MM-2 Magnetic swivel/tilt mount
RBP-1270

RECHARGEABLE FLASHLIGHTS WITH INTERCHANGEABLE POWER SUPPLY


This three C-cell light can be powered by either a This right angle light can be powered by a
3.6 volt Ni-Cad rechargeable battery pack or three Ni-Cad rechargeable battery pack or 4 C-cell
C-cell Alkaline batteries. The Alkaline batteries. The Ni-Cad rechargeable
charger recharges the flashlight version provides more than 2 hours of
or battery pack in two hours. continuous light output. Remove recharge-
Watertight and UL listed for use able battery pack and replace with alkaline
in Division 1 & 2 hazardous batteries for 5 hours of output. Survives
locations. Features a dual switch 30 ft. drop test. Lightweight, waterproof ATEX
- rotating head or push button - and over sized push button for one handed 500221
and an impact resistant design operation.
500224
that is able to survive a 30 foot Model 500221 (Ni-Cad Battery) ATEX
drop. CSA and MSHA listed. Xenon bulb and 2 spare bulbs. Includes UL Division 1 approved right angle flashlight, Ni-
System includes light, battery Cad rechargeable battery, charger base, 120V AC and 12-24V DC adapters.
charger base and plugs.
Model 500222 (Ni-Cad Battery) DIVISION II – Yellow
Model 500224 (Ni-Cad Battery) DIVISION II – Black
Halogen bulb and 2 spare bulbs. Includes UL Division II approved right angle flashlight,
19111 orange; 120V AC and 12-24V DC plugs Ni-Cad rechargeable battery, charger base, 120V AC and 12-24V DC adapters.
19331 orange; 220V European AC and 12-24 DC plugs
19112 yellow; 120V AC and 12-24V DC plugs Model 500241 (Ni-Cad Battery) ATEX
19114 black; 120V AC and 12-24V DC plugs Xenon bulb and 2 spare bulbs. Includes ATEX and UL Division 1 approved right angle
flashlight, Ni-Cad rechargeable battery, charger base, 220V AC and 12-24 DC chargers.

380 Stewart Road


Hanover Twp., PA 18706
Responder Ph: 570-825-1900 • Fax: 570-825-1984
800-631-3814
www.flashlight.com
E-mail: sales@flashlight.com
0242-03 4/28/06 3:46 PM Page 1

246-06

PELICAN PRODUCTS
2660 HEADLAMP
• Unbreakable Polycarbonate or Xenoy® Resin Includes 1 halogen lamp, 3 LED’s, and a
• O-Ring Sealed • Corrosion Proof commercial extended duty battery hip pack
which uses 4 D-cell batteries (not included).
This LED light provides up to 50,000 hours of light with over Light weight, multi-angle pivoting head with
100 hours of battery life. Uses four LR 44 1.5V alkaline coin focusable light beam. Cloth strap and
cells. Water resistant and corrosion proof. INCLUDES: Pocket rubber strap included.
clip and neck lanyard. Lights available in black or yellow with a
#1930 L1 LED white, red or blue/green beam.
FLASHLIGHT
HEADLAMP (Batteries Included) FM
MSHA
(Batteries Included) Made of unbreakable space- #2600
age hi-impact resin. Pre-focused beam. Includes 2 lamps, 1 hi &1 low intensity.
Submersible up to 500 ft. INCLUDES: Laser spot Adjustable beam, Corrosion proof ABS Approved
lamp module, shirt clip, 2 AAA-cell alkaline batteries polymer. Forehead pad. Submersible.
and Litebender. COLORS: Black, Yellow, Orange, 4 AA-cell batteries included. COLOR: Black.
#1900 2AAA Cloth and rubber straps included.
Blue, White, Neon Green.
FLASHLIGHT Approved
Class I, Div. 2 Approved Watertight to 500 ft. Lexan® EXL 9330 body,
AUS
Laser Spot Xenon lamp. Requires 3 C-cell
batteries (not included). COLORS: Black,
#1990 3N Yellow, Orange.
HI INTENSITY LED FM
MSHA AUS
Water resistant, push button activation. 150 #2000C HEAVY DUTY Approved Class I
hours of battery life. 10,000 hours of LED life. FLASHLIGHT w/Battery safety tray
Div. 1

Chemically resistant Xenoy® polymer


construction. COLORS: Black, Yellow. Submersible to 500 ft. Unbreakable ABS body with
Approved
Class I, Div. 1 Approved polycarbonate lens. Pre-focused Xenon lamp with a
white collimated light beam. INCLUDES: Multi-function
#2220 LIGHT WITH SWIVEL HEAD mounting clip (hard hats and dive mask straps),
Dual super bright white LEDs never need replac- adjustable black lanyard, foam lined battery contact and
ing. Water resistant. 100 hours of battery usage. 4AA batteries. COLORS: Black, Translucent Blue,
Body made of Xylex®. Swivel head pivots to a full Translucent Red, Translucent Silver, Yellow.
180 degrees. Multiple use built in clip. #2420 FLASHLIGHT Class I Approved
COLORS: Black, Translucent Blue, Orange, (Batteries Included) Div. 2

Translucent Red, Yellow.


#2220 Approved
Class I, Div. 1 Approved

#2140 POCKET #2130C MINI


FLASHLIGHT FLASHER
Approved
Approved
LIGHT
Class I, Div. 2 (Batteries Included)
(Batteries Included) Submersible to 500 ft. Xenon
#4300
laser spot pre-focused lamp module. Includes: Mini flashing light with 2 coin cell DIVE #4100
Tracker, hat and clothing clip, molded-in snap hook,
batteries (130 hr. battery life). LED lamp LIGHT UNDERWATER LIGHT
never needs replacement. COLOR: Yellow.
stainless steel key ring, 2 AAA-cell alkaline batteries. Watertight to 500 ft. 12 volt, 14 watt,
Submersible to 500 ft. Uses 8 C-cell batteries for 100,000 candlepower, hand-held light .
100,000 candlepower. Xenon gas lamp with Made of ABS. INCLUDES: Dual filament
#2460 - RECHARGEABLE LED FLASHLIGHT parabolic reflector. Polycarbonate lens. Made of Xenon backup lamp with 60 hrs. of lamp
28 Lumens. 8 hour run time. ABS polymer body with ABS polymer body with black thermoplastic over life (30 hrs. each filament), protective
polycarbonate lens. Drop-in Smart Charger base with molded accents. Primary and back up lamps lens shroud. Handle converts to multiple
110V charger high-capacity industrial NiMH battery. included. 4 C-cell model also available for 60,000 positions. Operates 10-12 hrs. on 8 D-cell
Colors: Black and Safety Yellow. Approvals: UL- candlepower. COLORS: Black, Blue, Yellow, batteries (not included). COLORS:
Pending, ATEX-II3 GD EEx nL IIC T4 T135° Silver. Black,Yellow, Orange, Blue.

RECHARGEABLES RECHARGEABLE
• Available with 110V, or 220V SPOT LIGHT
or 12V plug-in transformers
• Wall Mount Smart Chargers
• Rubber Lens Protectors 3850AC110N
Rechargeable battery
powered spot light with
M9 20,000 Candlepower a beam and safety warning flashing beam. 610 lumen value. Water resistant.
Body made of unbreakable ABS plastic. Powered by a sealed lead acid or
M11 40,000 Candlepower rechargeable battery (included). One handed removal from charger base.
M13 90,000 Candlepower Backup lamp, strong nylon shoulder strap and metal lens guard included.
Base footprint same as Streamlight® Litebox® (same electrical and hole
per filament pattern). Charger base bracket attaches to vehicle floor or walls at any angle
M9 M11 for quick easy access to flashlight. COLORS: Black, Yellow. Approved
Class I, Div.2

AVAILABLE THROUGH:
WUENSCH SALES CO. (see page 1405)
PELICAN
You break it, we replace it... forever. HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
243 4/28/06 3:49 PM Page 1

247-06

PELICAN PRODUCTS, INC.

Highly Focused Highly Focused


4AA LED 4AA LED Right-Angle
Flashlight Flashlight
#2410 #3610
1-watt Luxeon LED with Recoil LED Technology. 32 Lumens. 1-watt Luxeon LED with Recoil LED
4 AA batteries (included). 32 hours of burn time. One-handed safety Technology. 32 Lumens. 4 AA batteries
switch operation. ABS polymer body with nylon lens. Submersible up (included). 32 hours of burn time.
to 500 feet. COLORS: Black and Safety Yellow. One-handed safety switch operation.
Approvals: UL-Pending; ATEX – II3 GD EEx nL IIC T4 T135° ABS polymer body with polycarbonate lens.
Water resistant.
1-watt Recoil technology. 33 COLORS: Black and Safety Yellow.
LED Hands-Free lumen rating. 33 hour battery Approvals: UL-Pending;
Head Light #2680 burn time. Large on/off switch.
90 degree pivoting head allows
ATEX – II3 GD EEx nL IIC T4 T135°

light to be aimed where it is


needed. Unbreakable ABS
plastic construction. Provides
hands-free light. Includes
adjustable cloth, rubber straps
2AA Xenon
and 4AA batteries. Brilliant, fog Flashlight
and smoke cutting, collimated Water resistant. #2340
beam. COLOR: Non-glare Black. Tail button switch. Made of Xenoy
virtually indestructible chemical resistant resin with polycarbonate lens.
Pre-focused Xenon modified spot beam. Batteries included on select packaging.
COLORS: Black and Yellow.
4 AA Xenon Class I,
MSHA
Flashlight FM Div. 2 AUS
#2400

Submersible to 500 feet. Unbreakable Lexan® EXL 9330 body with


polycarbonate lens. Laser spot Xenon lamp module with an unsurpassed
white collimated beam. Includes one-handed safety switch operation, double
LED
shock mounted battery compartment and lanyard. Batteries included on Flashlight
select packaging. COLORS: Black, Yellow, Orange, Lime Green.
#2010
Class I,
FM MSHA Div. 1 Advanced super bright 35MM Recoil LED Technology. 50+ hours battery burn
time. 32 lumen rating. Submersible. Brilliant, fog and smoke cutting, collimated
beam. Twist on/off activation. Requires 3 C-cell batteries (not included).
M-6 Aluminum Approvals pending. COLORS: Black, Yellow.

Lithium Xenon M-6


Flashlight Aluminum
#2320
Water resistant. CNC-machined Lithium LED
aluminum flashlight powered by
2 CR123 Lithium cells (included).
Flashlight
Focused high-pressure Xenon #2330
lamp. Tail switch provides constant Water resistant. Advanced super bright 1-watt LED flashlight powered
on/off or momentary action. Safety by 2 CR123 Lithium cells with a CNC-machined aluminum body. Tail
lockout switch prevents inadvertent switch provides on/off or momentary action. Safety lockout switch
switching. Holster included. prevents inadvertent switching. Holster included.
COLORS: Black. COLORS: Black.

LHR Services and Equipment, Inc.


7815 Hansen, Houston, TX 77061 • Ph: 713-943-2324 • Fax: 713-943-1231

PELICAN
You break it, we replace it... forever.
Toll Free: 800-943-2324 • www.lhrservices.com • sales@lhrservices.com

“Striving to Keep the Future Safe”


3018 4/28/06 3:50 PM Page 642

248-06

UNDERWATER KINETICS
UK4AA eLED Work Light C4 and C8 eLED Dive Lights
This light features an adjustable-width beam which Single 6-watt, high-efficiency LED lamp provides an almost inde-
changes from broad and soft to tight and bright with a structable source of illumination for diving. It will not break when
twist of the bezel. It can be operated with one hand. dropped and has a life expectancy of well over 5000 hrs. The
The eLED beam can be dimmed to improve battery life. light emitted by the LED (light emitting diode) is similar to sun-
Waterproof to 10 feet. light and travels farther under water than the more yellow light
Ratings: UL, CSA Listed Class I Div 2. from a typical Xenon lamp. A power control circuit is built into
Size: 6.7 x 1.6 x 1.4 in. (17.0 x 4.0 x 3.5 cm) the light, which maintains the same brightness throughout the
• Burn time: 4.5 hrs - high, 10 hrs - low charge on a set of alkaline, Nicad, or NiMH batteries. Full- and
• 40.0 lumens half-power modes extend battery life. An O-ring sealed ABS and
• Click switch polycarbonate case protects the components to 500 ft. depth.
• 4 alkaline AA batteries Sizes: C4 – 3.2 in. (8.1 cm) dia. x 5.0 in. (12.7 cm)
• C1D2 certification C8 – 3.2 in. (8.1 cm) dia. x 7.0 in. (17.8 cm)
No. 14501 (yellow) Weight with batteries: 21 oz. (C4) or 36 oz. (C8)
No. 14502 (black) • Locking switch prevents accidental actuation
• Burn time (average) w/ alkaline C-cell disposable batteries:
UKE 2L Lithium Hand Light C4 – 6.5 hours C8 – 7.75 hours
Same beam and brightness as the UK4AA, but half the size. • Burn time (average) w/ Ahr Nicad C-cell rechargeable batteries:
Powered by two Lithium 123 batteries (5-10 year shelf life). C4 – 3.25 hours C8 – 5.25 hours
Good high intensity light for emergency illumination. ABS, C4 eLED Light w/ batteries: C8 eLED Light w/ batteries:
polycarbonate, PP rubber construction. Waterproof to 500 feet. No. 19041 (fluor. yellow) No. 19421 (fluor. yellow)
Size: 1.2 (dia.) x 4.4 in. (3.1 x 11.2 cm) No. 19042 (silver) No. 19422 (silver)
• 37.7 lumens No. 19043 (black) No. 19423 (black)
• 14801 Xenon lamp Battery Pack:
• Twist switch No. 19901 (C4)
• Burn time 3-4 hours No. 19911 (C8)
• Lightweight Rechargeable Upgrade Kit:
• Includes clip for attaching to gear No. 19926 (C4)
No. 12005 (yellow) No. 19927 (C8)
No. 12007 (black) (Kit includes 2.8 AHr
rechargeable nicad pack with
120 VAC 10-hour charger as well as a super bright 10-watt (C4),
SL4 and SL6 Hand Lights 20-watt (C8) incandescent lamp and twin lamp reflector).
Side-by-side battery configuration allows these 4 or 6 alkaline
C-cell lights to easily fit in a coat pocket. Precision machined
Universal 360° Light with Rotating Head
The rotating head puts light where it’s needed. For straight-on
aluminum reflector gives bright, narrow beam for sighting distant
illumination the right angle section can be removed. Attaches to
objects. Thumb or index finger activated rotary switch permits
a pocket, safety harness, turnout or belt with heavy duty nylon
single hand operation. High impact ABS and polycarbonate
clip. Stainless split ring and snap are included for attachment to
case will not corrode, dent, conduct electricity or freeze to skin in
clothing loops and button holes. Uses 4 alkaline AA cells.
cold weather. Waterproof to 500 feet. Rubber sleeve lanyard
Non-corroding ABS and polycarbonate plastic construction.
included.
Shock-absorbing rubber lens cover. Waterproof to 10 feet.
SL4
Size: 6.7 x 1.5 x 1.2 in.
Size: 6.2 x 2.46 x 1.7 in. (15.7 x 6.2 x 4.3 cm)
(17.0 x 3.8 x 3.1 cm)
• 112 lumens
Ratings: UL Listed Class I Div 2
• 5.5 watt Xenon bulb
• Prefocused high intensity Xenon
No. 80009 (yellow)
or eLED lamp
No. 80012 (black)
• 37.7 lumens (Xenon) or
SL6 30.0 lumens (eLED)
Size: 8.7 x 2.46 x 1.7 in. • Continuous or momentary thumb switch
(22.1 x 6.2 x 4.3 cm) No. 14161 (Xenon, yellow)
• 201 lumens No. 14162 (Xenon, black)
• 8 watt Xenon bulb No. 14163 (Xenon, orange)
No. 18014 (yellow) No. 14414 (eLED, yellow)
No. 18017 (black) No. 14415 (eLED, black)

You can count on UK Cases


UNDERWATER KINETICS
for protection of electronics,
tel: 858 513-9100 • fax: 858 513-3602
photo gear, emergency kits,
web: www.ukbright.com • info@uwkinetics.com
firearms, dry clothing, tools,
See Our Ad for More Information on UK Watertight Cases emergency rations, etc.
0245-03 4/28/06 3:51 PM Page 245

249-06

ENERGIZER
INDUSTRIAL BATTERIES

EN92 EN91 EN93 EN95 EN22 1212 1215 1235 1250 1222
SIZE AAA SIZE AA SIZE C SIZE D 9-VOLT SIZE AAA SIZE AA SIZE C SIZE D 9-VOLT

INDUSTRIAL ALKALINE BATTERIES


Cat. No. Volt/Size UPC# STANDARD PKG. Chemical Major
Quan. Wt. Cube System Use
EN6 1.5 05953-6 20 21.0 0.70 Alkaline Industrial
EN91 AA 01919-6 144 7.92 0.09 Alkaline Industrial
EN92 AAA 01920-2 144 4.0 0.06 Alkaline Industrial
EN93 C 01921-9 72 11.3 0.11 Alkaline Industrial
EN95 D 01922-6 72 23.3 0.23 Alkaline Industrial
EN22 9 01912-7 72 7.8 0.07 Alkaline Industrial
EN715 7.5 01923-3 4 22.7 0.35 Alkaline Lantern
EN715
EN529 6 05543-9 6 12.35 0.10 Alkaline Lantern

INDUSTRIAL BATTERIES – HEAVY DUTY


Cat. No. Volt/Size UPC# STANDARD PKG. Chemical Major
Quan. Wt. Cube System Use
1212 AAA 04110-4 48 1.08 0.01 Carbon Zinc Industrial
1215 AA 01283-8 192 7.15 0.12 Carbon Zinc Industrial
1235 C 05239-1 192 20.0 0.28 Carbon Zinc Industrial
1250 D 08898-7 192 42.6 0.68 Carbon Zinc Industrial
1222 9V 01161-9 72 6.3 0.07 Carbon Zinc Industrial
1209 6V 01163-3 6 5.5 0.25 Carbon Zinc Industrial
1231
6-VOLT 1231 6V 08991-5 6 17.4 0.32 Carbon Zinc Industrial

INDUSTRIAL FLASHLIGHTS & LANTERNS


No. 1259 Industrial Heavy Duty Safety Light
No. 459 – Industrial Uses 2 “D” cell batteries, PR2 bulb. Mine
Heavy Duty Floating Safety and Health Administration approved
Safety Lantern and Underwriters’ Laboratories, Inc. listed for
Mine Safety & Health use in certain explosive gas mixtures.
Administration approved
1259
and Underwriters’ Labor-
atories, Inc. listed for use No. 1359 Industrial Heavy Duty Safety Light
in certain explosive gas Uses 3 “D” cell batteries, PR7 bulb. Mine
mixtures. Uses 6-volt lan- 459 Safety and Health Administration approved
tern battery and PR13 bulb. and Underwriters’ Laboratories, Inc. listed for
1359 use in certain explosive gas mixtures.

www.manning-electric.com
Stocking Distributor for
Energizer
154 27th Street — Brooklyn, New York 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0246-03 4/28/06 3:52 PM Page 246

250-06

ENERGIZER
COMPLETE LINE SPECIFICATIONS – BATTERY PRODUCTS

ALKALINE BATTERIES
STANDARD PKG. Chemical
Cat. No. Volt/Size UPC# Major Use
Quan. Wt. Cube System
E96BP-2 AAAA 03077-1 12 0.8 .07 Alkaline Multi-Purpose
E90 N 01448-1 24 0.5 .01 Alkaline Photoflash Multi-Purpose
522
E91 AA 01131-2 144 8.0 .09 Alkaline Multi-Purpose
L522 E95
E92 AAA 01399-6 48 1.2 .01 Alkaline Multi-Purpose
E93 C 01135-0 72 11.3 .11 Alkaline Multi-Purpose
E95 D 01138-1 72 23.3 .23 Alkaline Multi-Purpose
521 6 08962-5 4 17.7 .24 Alkaline Lantern
522 9 03158-7 72 7.8 .07 Alkaline Transistor Radio
528 6 09253-3 4 8.2 .10 Alkaline Electronic Appl.
529 6 07633-2 12 24.4 .34 Alkaline Lantern
L522 9 06664-0 48 .057 .02 Lithium Electronic / Medical
E93 E91 E92

CARBON ZINC BATTERIES – HEAVY DUTY


STANDARD PKG. Chemical
Cat. No. Volt/Size UPC# Major Use
Quan. Wt. Cube System
1209 6 01163-3 12 17.3 .25 Carbon Zinc HD Lantern
1209-2 6 03912-5 6 16.5 .26 Carbon Zinc HD Lantern
1212 AAA 04110-4 48 1.0 .11 Carbon Zinc Remote Control
1215 AA 01062-9 192 7.5 .12 Carbon Zinc Radio
1222 9 01161-9 72 6.0 .07 Carbon Zinc Transistor Radio

LITHIUM PHOTO BATTERIES


Cat. No. Volt/Size UPC# STANDARD PKG. Chemical Major
Quan. Wt. Cube System Use
EL123APBP 3 04109-8 6 0.36 .02 Lithium Photo
EL223APBP 6 03982-8 6 0.63 .02 Lithium Photo
EL2CR5BP 6 02091-8 6 0.66 .02 Lithium Photo
2L76BP 3 02584/09252-6 6 0.10 .01 Lithium Photo
L544BP 6 02572/09251-9 6 0.18 .01 Lithium Photo
L91BP-2 AA 05679/-03408-3 24 0.65 .04 Lithium Photo
L91BP-4 AA 01793 6 5.00 .20 Lithium Photo
EL1CR2BP 6 07506-2 6 0.32 .02 Lithium Photo
L91BP-4 EL1CR2BP2 3 02297 6 .40 .02 Lithium Photo

STANDARD PHOTO BATTERIES


Cat. No. Volt/Size UPC# STANDARD PKG. Chemical
Major Use
Quan. Wt. Cube System
A23BP-2 12 05266-7 6 0.36 .02 Mang. Diox. Hi Rate Pulse Electr.
A76BP 1.5 02582/04922-36 6 0.08 .01 Mang. Diox. Photo Calculator
EPX76BP 1.5 02583/03722-0 6 0.03 .01 Silver Oxide Calculator
539BP 6.0V-J 02659/02141-0 6 0.54 .01 Alkaline Photo
A544BP 6 02571/04923-0 6 0.23 .01 Mang. Diox. Photo

EPX76

ENERGIZER
533 Maryville University Drive
St. Louis, MO 63141
TEL: (800) 426-8268 • FAX: (920) 969-2970
www.energizer.com
0247-03 4/28/06 4:03 PM Page 1

251-06

ENERGIZER
COMPLETE LINE SPECIFICATIONS – BATTERY PRODUCTS (Cont’d.)

BATTERIES FOR DIGITAL CAMERAS, ELECTRONIC GAMES, ETC.


STANDARD PKG. Chemical
Cat. No. Volt/Size UPC# Ti Hi Quan. Wt. Cube System
X91RP-4 AA-4 02707 25 9 24 6.30 0.20 Zinc-
X92RP-4 AAA-4 02704 28 12 24 3.70 0.15 Manganese
X93RP-2 C-2 02701 12 11 24 9.30 0.33 Dioxide
X22RP X95RP-2 D-2 02699 12 8 24 17.50 0.48 (Zn/MnO2)
X22RP 9V 02709 12 13 24 4.03 0.28
X92RP-4

WATCH AND CALCULATOR BATTERIES


STANDARD PKG. Chemical
Cat. No. Volt/Size UPC# Major Use
X95RP-2 Quan. Wt. Cube System
186BP 1.5 04921-6 6 .13 .01 Mang. Diox. Calculator
301BP 1.5 00039-2 6 .11 .01 Silver Oxide Elec. Watch
303BP 1.5 00017-0 6 .12 .01 Silver Oxide Elec. Watch
317BP 1.5 06771-5 6 .11 .01 Silver Oxide Elec. Watch
319BP 1.5 01899-1 6 .11 .01 Silver Oxide Elec. Watch
321BP 1.5 09660-9 6 .11 .01 Silver Oxide Elec. Watch
329BP 1.5 01898-4 6 .11 .01 Silver Oxide Elec. Watch
344BP 1.5 09647-0 6 .13 .01 Silver Oxide Elec. Watch
357BP 1.5 00028-6 6 .12 .01 Silver Oxide Elec. Watch
362BP 1.5 07770-7 6 .09 .01 Silver Oxide Elec. Watch
364BP 1.5 07771-4 6 .11 .01 Silver Oxide Elec. Watch
366BP 1.5 09657-9 6 .12 .01 Silver Oxide Elec. Watch
370BP 1.5 09646-3 6 .11 .01 Silver Oxide Elec. Watch
371BP 1.5 09645-6 6 .11 .01 Silver Oxide Elec. Watch
376BP 1.5 06308-3 6 .09 .01 Silver Oxide Elec. Watch
377BP 1.5 09641-8 6 .09 .01 Silver Oxide Elec. Watch
379BP 1.5 01900-4 6 .11 .01 Silver Oxide Elec. Watch
381BP 1.5 00058-3 6 .13 .01 Silver Oxide Elec. Watch
384BP 1.5 09644-9 6 .11 .01 Silver Oxide Elec. Watch
386BP 1.5 00033-0 6 .13 .01 Silver Oxide Elec. Watch
ECR2032 389BP 1.5 00046-0 6 .13 .01 Silver Oxide Elec. Watch
390BP 1.5 03056-6 6 .11 .01 Silver Oxide Elec. Watch
391BP 1.5 03771-8 6 .13 .01 Silver Oxide Elec. Watch
392BP 1.5 00034-7 6 .11 .01 Silver Oxide Elec. Watch
393BP 1.5 00038-5 6 .10 .01 Silver Oxide Elec. Watch
394BP 1.5 09791-0 6 .12 .01 Silver Oxide Elec. Watch
395BP 1.5 09643-2 6 .11 .01 Silver Oxide Elec. Watch
396BP 1.5 07772-1 6 .11 .01 Silver Oxide Elec. Watch
397BP 1.5 09642-5 6 .10 .01 Silver Oxide Elec. Watch
399BP 1.5 07773-8 6 .13 .01 Silver Oxide Elec. Watch
ECR1025BP 3.0 06310-6 6 .06 .01 Lithium Elec. Watch
ECR1616BP 3.0 03858-6 6 .11 .01 Lithium Elec. Watch
ECR1620BP 3.0 03859-3 6 .11 .01 Lithium Elec. Watch
ECR2016BP 3.0 08861-1 6 .11 .01 Lithium Elec. Watch
W3000 ECR2025BP 3.0 08862-8 6 .13 .01 Lithium Elec. Watch
ECR2032BP 3.0 08863-5 6 .16 .01 Lithium Elec. Watch
ECR2450BP 3.0 08513-9 6 .09 .01 – Elec. Watch

ENERGIZER
533 Maryville University Drive
St. Louis, MO 63141
TEL: (800) 426-8268 • FAX: (920) 969-2970
www.energizer.com
0248-03 4/28/06 4:04 PM Page 1

252-06

ENERGIZER
COMPLETE LINE SPECIFICATIONS — BATTERY PRODUCTS (Cont’d.)

SPECIAL APPLICATION BATTERIES


Cat. No. Volt/Size UPC# STANDARD PKG. Chemical
Major Use
Quan. Wt. Cube System
206 9 01036-0 12 1.0 .01 Carbon Zinc Instruments
266 9 01189-3 12 4.8 .07 Carbon Zinc Instruments
276 9 01190-9 6 3.5 .07 Carbon Zinc Instruments
411 15.0 01144-2 6 0.5 .01 Carbon Zinc Instruments
412 22.5 01334-7 12 1.1 .02 Carbon Zinc Instruments
413 30 01145-9 12 1.4 .02 Carbon Zinc Instruments
415 45 01223-4 6 1.1 .01 Carbon Zinc Instruments
416 67.5 01224-1 6 1.5 .02 Carbon Zinc Instruments
455 45 01227-2 6 3.3 .04 Carbon Zinc Portable Radio B
467 67.5 01231-9 12 9.5 .12 Carbon Zinc Portable Radio B
489 225 01268-5 6 16.5 .30 Carbon Zinc Electr. Flash
493 300 01241-8 3 3.5 .07 Carbon Zinc Geiger Counter
497 510 01242-5 4 7.6 .12 Carbon Zinc Electronic Flash
504 15 01386-6 12 0.5 .01 Carbon Zinc Instruments
505 22.5 01362-0 12 0.76 .01 Carbon Zinc Instruments
EV411 706 6 01272-2 4 25.4 .46 Carbon Zinc Lgn. Emergency
711 1.5 01274-6 6 4.0 .08 Carbon Zinc Model Ign. Glo-Plug
763 22.5 01291-3 6 5.3 .01 Carbon Zinc Instruments
AC146X 8.4 04021-3 72 6.2 .40 Zinc-Air Medical Equipment

TELECOMMUNICATION BATTERIES
Cat. No. Volt/Size UPC# STANDARD PKG. Chemical
Major Use
Quan. Wt. Cube System
HS6570 4.5 02074-1 10 10.2 .15 Alkaline Communication
HS14196 45 09954-9 15 17.5 .29 Carbon Zinc Communication

HS14196

RECHARGEABLE BATTERIES
Cat. No. Volt/Size UPC# STANDARD PKG. Chemical
Quan. Wt. Cube System
NH15BP-2 AA 00868-8 6 .80 .04 NiMH
NH15BP-4 AA 01636-2 6 1.40 .04 NiMH
NH12BP-2 AAA 00866-4 6 .44 .03 NiMH
NH22NBP 7.2 00916-6 6 .70 .04 NiMH
NH35BP-2 C 01200-5 6 1.80 .07 NiMH
NH50BP-2 D 01203-6 6 2.00 .09 NiMH
CHM4AAWB Charger 00867-1 3 3.20 .25 NiMH
CHM24AAPP Charger 03522-6 12 13.80 .95 NiMH
CHM4FC CHM4FC Charger 01701-7 3 7.00 .34 NiMH

ENERGIZER
533 Maryville University Drive
St. Louis, MO 63141
TEL: (800) 426-8268 • FAX: (920) 969-2970
www.energizer.com
0249-05 5/18/06 11:29 PM Page 1

253-06

LAMARCHE MANUFACTURING COMPANY


MARINE BATTERY CHARGERS
A completely automatic, solid state, constant voltage battery charger built to carry continuous Standard Features
and intermittent loads up to 80% of its maximum rated output capacity. Suitable for applications • Magnetic amplifier circuitry provides increased longevity
where it is advantageous to have the charger permanently connected across the battery, keeping and worry-free operation
it fully charged at all times and to simultaneously carry • Automatic AC input voltage compensation +/- 10%
continuous and/or intermittent current loads such as on • Automatic surge suppression
board peripheral equipment. • Dual AC input and DC output fusing protects battery & charger
• Automatic DC voltage regulation
The charger is designed and built to charge flooded lead- • DC current limiting circuitry (typically less than 140%)
acid or nickel-cadmium batteries containing a specific eliminates the need for cranking disconnect relay
number if cells. However, it is not suitable to charge • 5% accuracy analog DC ammeter
sealed valve-regulated batteries since these require • Charger design prevents battery from discharging if AC line fails
output filtering such as a power supply. The operation • Complete Isolation of the AC line from the DC charging circuit
of the charger is simple – there are no controls to be set • Environmental:
for different applications since the amount of loading and Operating Temperature: 0 to 50°C (32 to 122°F)
the state of charge of the battery determines the Storage Temperature: -40 to 85°C (-40 to 185°F)
charger’s output current. Once the battery becomes fully Relative Humidity: 0 to 95% non-condensing
charged, the output current will automatically decrease • NEMA 1 enclosure ANSI 61 gray baked enamel paint
to a very low trickle charge to prevent overcharging of • All A40 models are U.L. 1564 listed. Units are CSA C22.2
A-40 No. 107 listed (except where noted)
the batteries.
DC Output AC Input Current Draw Case Standard Models USGC Models
Amps Volts Fuse A D B No. Model No. Ship. Wt. Ship. Wt.
Model No.
Size 120 208 240 lbs. kg lbs.
10 12 20A 2.5 1.4 1.3 05 A40-10-12V 23 10.4 A41-10-12V 26
20 12 35A 5 2.9 2.5 2 A40-20-12V 55 24.9 A41-20-12V 58
30 12 50A 7.5 4.3 3.8 2 A40-30-12V 65 29.5 A41-30-12V 68
40 12 70A 10 5.8 5 2 A40-40-12V 74 33.6 A41-40-12V 77
60 12V 100A 15 8.7 7.5 7 A40-60-12V 112 50.8 A41-60-12V 115
75 12V 130A 19 11 9.4 3 A40-75-12V(1) 120 54.4 A41-75-12V 123
100 12V 150A 26 15 13 6 A40-100-12V(1) 170 77.1
10 24V 20A 5 2.9 2.5 2 A40-10-24V 61 27.7 A41-10-24V 64
20 24V 35A 10 5.8 5 2 A40-20-24V 72 32.7 A41-20-24V 75
30 24V 50A 15 8.7 7.5 7 A40-30-24V 107 48.5 A41-30-24V 110
40 24V 70A 21 12 10 7 A40-40-24V 110 49.9 A41-40-24V 113
60 24V 100A 31 18 15 3 A40-60-24V 160 72.6 A41-60-24V 163
75 24V 130A 38 22 19 3 A40-75-24V(1) 200 90.7 A41-75-24V 203 A-41 (USCG)
100 24V 150A 51 29 26 8A A40-100-24V(1) 300 136.1
10 32V 20A 6.7 3.9 3.3 2 A40-10-32V 66 29.9 A41-10-32V 69
20 32V 35A 14 7.7 6.7 2 A40-20-32V 73 33.1 A41-20-32V 76
30 32V 50A 21 12 10 7 A40-30-32V 108 49.0 A41-30-32V 111
40 32V 70A 27 16 14 3 A40-40-32V 145 65.8 A41-40-32V 148
60 32V 100A 41 24 21 3 A40-60-32V 195 88.5 A41-60-32V 198
75 32V 130A 51 29 26 8A A40-75-32V(1) 300 136.1 A41-75-32V 303
10 130V 20A 26 15 13 3 A40-10-130V 155 70.3 A41-10-130V 158
20 130V 35A 51 29 26 6 A40-20-130V 175 79.4 A41-20-130V 178
30 130V 50A 76 44 38 8A A40-30-130V 330 149.7 A41-30-130V 333
All above models designed for optimal performance at 60Hz. They will operate at 50Hz with reduced performance. Must
specify one only battery type and number of cells. *AC Current Draws based @ 100% load and standard battery cells of 6L(12V),
12L(24V), 16L(32V), 60L(130V). Maximum Current Draw is typically 140% of ratings shown. (1) Denotes units not CSA Listed.
Case Specifications When ordering, please specify:
• Model No.
Overall Dimensions Cable Entry
Case • Input voltage, frequency, phase
Width Depth Height (when facing unit) Mounting
No. • Number and type of battery cells
in mm in mm in mm AC input DC output • Ampere hour capacity of battery
05 8.000 203 7.000 178 13.000 330 Bottom Right Bottom Right Wall • Intermittent DC loads and duration
1 10.375 264 7.875 200 16.250 413 Right Left Wall • Continuous DC load
2 12.812 326 10.000 254 17.125 435 Right Left Wall • Allowable recharge time from full
3 15.375 391 11.000 280 23.750 603 Right Left Wall/Floor
discharge (where applicable)
6 25.580 650 13.935 354 28.000 711 Right/Top/Bottom Left/Top/Bottom Wall/Floor
7 14.250 362 10.625 270 19.875 505 Right Left Wall/Floor Optional accessories
8A 27.200 691 15.250 387 32.500 825 Right Left Floor • Built-in 2 or 3 battery charge divider
Case sizes may differ depending on optional accessories. Dimensions shown above are overall (may increase case size)
footprint. Detailed dimensions drawings are available for mounting purposes. • External 2 or 3 battery charge divider

106 Bradrock Dr., Des Plaines, IL 60018-1967


Tel: (847) 299-1188 • Fax: (847) 299-3061
E-mail: sales@lamarchemfg.com
Web: www.lamarchemfg.com
250 4/28/06 4:06 PM Page 250

254-06

EAST PENN MFG. CO., INC.


LEAD-ACID MARINE BATTERIES

COLOR CODE
COVER/CASE
PART NO. PERFORMANCE LEVEL APPROXIMATE MAXIMUM OVERALL DIMENSIONS

VOLTS
QTS. WEIGHT (in inches and mm)
GROUP FOOT SUGG. OF
NO. NOTES WARR. REF. CA CCA RESERVE
WET DRY ACID
@ 32°F @ 0°F CAPACITY WET DRY L W H
12-VOLT MARINE/RV STARTING CALCIUM MAINTENANCE-FREE
24 24M7 — WW +HMU 24 1000 875 125 12 — 45 —
24M6 — BB +HMU 24 820 650 120 12 — 40 —
24M5 — BB +HMU 24 650 550 90 12 — 35 ⁄2
1
— 103⁄4 273 63⁄4 171 93⁄8 238
24M4 — BB +HMU 24 550 440 70 12 — 32 —
27 27M6 — BB +HU 24 925 750 182 12 — 56 — 121⁄2 318 63⁄4 171 93⁄8 238
HEAVY-DUTY COMMERCIAL SERVICE

4 904MFMM — BB L 30 1220 1000 270 6 — 47 — 121⁄2 318 67⁄8 175 91⁄2 241

4D 804DMM — BB H★ 30 1100 900 260 12 — 97 —


203⁄4 527 81⁄2 216 101⁄8 258
904DMM 904DYMM BB H★ 30 1235 1010 290 12 16 991⁄2 58
8D 708DMM — BB H★ 30 1340 1100 325 12 — 1171⁄2 —
908DMM 908DYMM BB H★ 30 1630 1375 430 12 181⁄2 130 80 203⁄4 527 11 279 10 254
908DMFMM — BB HL 30 1790 1450 450 12 — 134 —
31 931MF — BB LMXJ 30 810 650 145 12 — 51 —
931PMF — BB LMSJ 30 810 650 145 12 — 51 —
1031MF — BB LMXJ 30 910 760 170 12 — 541⁄2 —
1031PMF — BB LMSJ 30 910 760 170 12 — 541⁄2 —
1131MF — BB LMXJ 30 1110 925 170 12 — 561⁄2 — 13 330 63⁄4 171 91⁄2 241
1131PMF — BB LMSJ 30 1110 925 170 12 — 561⁄2 —
1131XMF 1131XMFD BB LMXJ 30 1190 1000 185 12 6 58 43
31P 1131XPMF BB JLMS 30 1190 1000 185 12 — 58 — 13 330 63⁄4 171 91⁄2 241
1231MF — BB LMXJ ~ 30 1260 1125 195 12 — 61 —
1231PMF — BB LMSJ ~ 30 1260 1125 195 12 — 61 —
12-VOLT HEAVY-DUTY COMMERCIAL SEVERE SERVICE/DUAL PURPOSE
31 DP31CS — BB LMXJ§ 30† 810 650 180 12 — 57 —
DP31PCS — BB LMSJ§ 30† 810 650 180 12 — 57 — 13 330 63⁄4 171 91⁄2 241
7T31 (Deep Cycle) — BB LMXJ§ 30† 910 700 190 12 — 62 ⁄2
1

MINS. @ MINS. @ 20 A. H. APPROX.


WEIGHT
23 AMPS ≈ 25 AMPS ≈ RATE ≈ (WET)
12-VOLT DUAL PURPOSE STARTING/DEEP CYCLE SERVICE
24 DP24 — BB ★HU 12 650 525 140 120 65 42 103⁄4 273 63⁄4 171 93⁄8 238
27 DP27 — BB ★HU 12 770 625 175 150 80 49 12 ⁄2 318
1
6 ⁄4
3
171 93⁄8 238
31 DP31DT — BB HLMSX§ 12 810 650 205 182 100 57 13 330 63⁄4 171 91⁄2 241
12-VOLT MARINE/RV HEAVY-DUTY DEEP CYCLE SERVICE (INCLUDING STARTING)
24 DC24 — BB •HU § 12 625 500 150 130 75 45 103⁄4 273 63⁄4 171 93⁄8 238
27 DC27 — BB •HU § 12 715 575 200 175 90 53 121⁄2 318 63⁄4 171 93⁄8 238
31 DC31DT — BB •HMLSX§ 12 810 650 225 185 105 59 13 330 63⁄4 171 91⁄2 241
Note: The three “DC” deep cycle part numbers above include double insulated glass mat separators.
VOLTS

QTS.OF APPROX. WT.


MINS. @ 23 AMP DRAW ACID WET DRY
12-VOLT MARINE DEEP CYCLE — ELECTRIC VEHICLE
U1 EVU1 — BB ★HZ ◗ 12 54 12 — 19 –– 83⁄4 222 51⁄8 130 71⁄4 184
22NF EV22NF — BB H ◗G★ 12 76 12 — 31 –– 9 ⁄8
3
238 5 ⁄2
1
140 9 229
8 A.H. Rate ≈ CCA 6A.H.Rate

8-VOLT MARINE AND INDUSTRIAL


8V195 8V195D BB •HR 24 170 980 166 8 111⁄2 90 60 203⁄4 527 71⁄4 184 105⁄8 270
819 819D BB •HKT§ 24 167 510 158 8 13 119 90 24 ⁄2 622
1
7 ⁄2
1
191 101⁄2 267
821 821D BB •HK§ 24 187 530 177 8 14 ⁄2
1
135 98 27 ⁄2 699
1
7 ⁄2
1
191 101⁄2 267
825 825D BB •HKF§ 24 224 730 212 8 16 ⁄2
1
160 120 26 ⁄8 683
7
8 ⁄2
1
216 113⁄4 298
See footnotes on next page.

No matt
er w
Starting hat your need
®

, s
or Dual Deep Cycle … Lyon Station, PA 19536-0147 • Fax: 610-682-4781
Purpose Order Dept Hotline: 610-682-4231
.
ISO 9001 www.dekabatteries.com
™ TS16949 E-mail: eastpenn@eastpenn-deka.com
251 4/28/06 4:08 PM Page 251

255-06

EAST PENN MFG. CO., INC.


LEAD ACID MARINE BATTERIES
AGM BATTERIES
MAINTENANCE-FREE ABSORBED GLASS MAT (AGM)
TECHNOLOGY IMMOBILIZES ELECTROLYTE, MAKING THESE
BATTERIES SPILLPROOF AND LEAKPROOF.

ABSORBED GLASS MAT 12-VOLT MARINE BATTERIES –– STARTING/DEEP CYCLE


GRP. PART FOOT- SUGG. CCA CA RC @ 20 A.H. WEIGHT LENGTH WIDTH HEIGHT
SIZE NO. NOTES WARR. TERM. @ 0°F @ 32°F 25 AMP CAP. ≈ LBS. KG. IN. MM IN. MM IN. MM
U1 8AU1HM ZH12 6 T873 240 335 48 32 24 10.9 8 5⁄16 211 5 1⁄8 130 7 1⁄4 184
22NF 8A22NFM G12 6 T881 280 — 90 55 38.5 17.5 93⁄8 238 5 1⁄2 140 9 1⁄4 235
24 8A24M HQ12 36 T872M 470 660 140 79 53 24.0 10 7⁄8 276 6 3⁄4 171 9 7⁄8 251
27 8A27M HQ12 36 T872M 580 810 175 92 63 28.6 12 3⁄4 324 6 3⁄4 171 9 7⁄8 251
31 8A31DTM HSX1 36 SAE/STUD 650 850 190 105 69 31.3 12 15⁄16 329 6 3⁄4 171 9 3⁄8 238
34 9A34M HUM 24 SAE/STUD 750 860 120 55 41.5 18.9 10 3⁄4 273 6 7⁄8 175 8 3⁄8 212
4D 8A4DM HS 36 SAE 1110 1420 380 198 129 58.5 20 3⁄4 527 8 1⁄2 216 10 254
8D 8A8DM HS 36 SAE 1350 1725 480 245 158 71.7 20 3⁄4 527 11 279 10 254
GC2 8AGC2M G 12 T881 690 915 380 187 69.5 32.0 101⁄4 260 71⁄8 181 107⁄8 276
ETX16LM 123 12 275 10 A.H. Rating = 19 17.0 7.7 6 7⁄8 175 4 102 6 1⁄8† 155†
ETX20LM 12 12 270 10 A.H. Rating = 17.5 15.5 7.0 6 7⁄8 175 3 7⁄16 88 6 1⁄8 155

SEALED GEL BATTERIES


GELLED ELECTROLYTE MAKES THESE SEALED BATTERIES
SPILLPROOF AND LEAKPROOF. GEL CONSTRUCTION ELIMINATES
VIBRATION DAMAGE TO PLATES, PROVIDES LONGER DEEP CYCLE LIFE
MORE TROLLING/OPERATING TIME AND FASTER RECHARGE.

SEALED GEL 12-VOLT MARINE BATTERIES — STARTING/DEEP CYCLE


Res. Minutes Discharged at ≈ Ampere Hour Capacity ≈
Dimensions In (mm)
Type Foot CCA MCA Capacity 75 50 25 15 8 5 20 Hr. 6 Hr. 3 Hr. 1 Hr. Approx. Wt.
No. Notes Volts Terminal @ 0°F @ 32°F @ 80°F Amps Amps Amps Amps Amps Amps Rate Rate Rate Rate Lbs. (Kgs.) L W H
8GU1HM HZ 12 T874 175 250 44 5 12 47 90 190 325 31.6 28.0 25.5 21.0 23.4 (10.6) 85⁄16 (211) 51⁄8(130) 71⁄4 (184)
8G24M HQ 12 T872M 410 575 132 33 57 140 245 500 845 73.6 64.5 59.3 48.5 52.5 (23.8) 107⁄8(276) 63⁄4(171) 97⁄8 (251)
8G27M HQ 12 T872M 505 700 160 40 70 170 300 605 1000 86.4 76.0 69.9 57.0 63.2 (28.7) 12 ⁄4(324) 6 ⁄4(171)
3 3
97⁄8 (251)
8G31DTM HSX 12 SAE/Stud 550 780 180 51 84 190 335 690 1160 97.6 85.2 78.6 64.5 70 (31.7) 12 ⁄16(329) 6 ⁄4(171)
15 3
93⁄8 (238)
8GGC2M G 6 T881 585 850 92 92 155 375 680 1360 2200 180.0 155.0 136.0 99.0 68.4 (31.0) 101⁄4(260) 71⁄8(181) 107⁄8 (276)
8G4DM HS 12 SAE 970 1245 375 105 175 395 685 1385 2300 183.0 160.2 147.6 122.0 127 (57.5) 203⁄4(527) 81⁄2 (216) 10 (254)
8G8DM HS 12 SAE 1150 1470 475 135 220 500 890 1750 3000 225.0 198.0 181.8 150.0 157 (71.1) 203⁄4(527) 11 (279) 10 (254)

FOOTNOTES: SYMBOL DEFINITIONS: IMPORTANT GEL AND AGM CHARGING INSTRUCTIONS: WARRANTY
G - Offset post w/horizontal hole, stainless steel + - Maintenance-free calcium grids VOID IF OPENED OR IMPROPERLY CHARGED. Do not install in a
5/16” bolt and hex nut • - Low maintenance – Low antimony grids sealed container. Constant under- or overcharging will damage any
H - Includes handles ★ - Hybrid construction battery and shorten its life! Use a good constant potential, voltage-
J - Includes lifting ledges regulated charger.
≈ - Nominal
K - Hard rubber, multi-cell cover construction ◗ - With individual vent caps For 12-volt gel batteries, charge to at least 13.8 volts but no more than
L - Anchor lock elements ▲ - Maintenance-free w/ vent caps, calcium grids 14.1 volts at 68°F (20°C). For 6-volt gel batteries, charge to at least 6.9
M - Flush manifold vented cover volts but no more than 7.05 volts at 68°F (20°C). The open circuit voltage
† - 12 months in deep cycle service of a fully charged 12-volt battery is 12.8V and a fully charged 6-volt
Q - Combination terminals, offset with 5/16" § - Deduct 15% from CCA and CA rating shown
stainless stud and wing nuts battery is 6.4V at 68°F (20°C). However, as the battery charges, the
to allow for double insulation (glass mat). building internal pressure (voltage) causes resistance to the charge.
R - Hard rubber, one-piece cover construction ~ - Deduct 4% from CCA and CA rating shown to Therefore, the on-charge voltage must be higher (at least 13.8V for
S - SAE “automotive type” post allow for double insulation (glass matt) 12-volt and 6.9V for 6-volt) to overcome this internal pressure (voltage)
T - Dual top terminals with SAE post and 3/8" POS., 1 - “Non-Spillable” defined by DOT (Department during charging.
5/16" NEG. Stainless steel studs and wing nuts. of Transportation) definition
For 12-volt AGM batteries, charge to at least 14.4 volts but no more than
U - Offset SAE post w/vertical 5/16" NEG., 3/8" POS. 2 - “Non-Spillable” defined by ICAO
(International Commercial Airline 14.6 volts at 68°F (20°C). The open circuit voltage of a fully charged
Stainless steel studs and wing nuts
Organization) and IATA (International Airline 12-volt AGM battery is 12.8V at 68°F (20°C). However, as the battery
V - Combination terminals, offset post with charges, the building internal pressure (voltage) causes resistance to the
horizontal hole, 5/16" bolt and hex nut Transport Association) definitions
3 - Shipped with 20mm adapter charge. Therefore, the on-charge voltage must be higher (at least 14.2V)
X - 3/8" x 16 stainless steel stud posts to overcome this internal pressure (voltage) during charging.
Z - U1R terminals have round holes,
U1L terminals have square holes Dry = up to 10% reduced capacity.
All ratings conform to B.C.I. specifications.
COLOR CODE: B - Black W - White All AGM and gel ratings are after 15 cycles.
First letter indicates cover, second letter All batteries manufactured in polypropylene cases
indicates case. except where noted.

Sealed ®
® Batteries for ®
Deka seamate dominator
®
Virtually Any
Application!
www.dekabatteries.com
252 4/28/06 4:08 PM Page 252

256-06

COOPER BUSSMANN
ONE TIME FUSES
Non-renewable

1 to 60 ampere 70 to 600 ampere For Voltages up to 600V ac or dc


For Voltages up to 250V ac or dc Lbs.
Underwriters’ Laboratories Inc. Lbs. Symbol & Carton per
Listed by Canadian Standards Association Symbol & Carton per Amperes Quantity 100
For Voltages up to 250V ac or dc For Voltages up to 600V ac or dc Amperes Quantity 100 NOS 70
Lbs. Lbs. NON 70 NOS 80 5 56
Symbol & Carton per Symbol & Carton per NON 80 5 32 NOS 90
NON 90 NOS 100
Amperes Quantity 100 Amperes Quantity 100
NON 100 NOS 110
NON 1 NOS 1
NON 125 NOS 125
NON 3 NOS 3
NON 150 1 79 NOS 150 1 124
NON 6 NOS 6
NON 175 NOS 175
NON 10 10 3.8 NOS 10 10 14.5
NON 200 NOS 200
NON 15 NOS 15
NON 225 NOS 225
NON 20 NOS 20
NON 250 NOS 250
NON 25 NOS 25
NON 300 1 165 NOS 300 1 303
NON 30 NOS 30
NON 350 NOS 350
NON 35 NOS 35
NON 400 NOS 400
NON 40 NOS 40
NON 450 NOS 450
NON 45 10 10 NOS 45 10 26
NON 500 1 276 NOS 500 1 463
NON 50 NOS 50
NON 600 NOS 600
NON 60 NOS 60

DIMENSIONS
250 Volt 600 Volt
Symbol & Length Dia. of Dia. Over Contact Blade Symbol & Length Dia. of Dia. Over Contact Blade
Amperes Overall Tube Ferrules Thickness Width Length Amperes Overall Tube Ferrules Thickness Width Length
NON 0 to 30 2” 1/2” 9/16” – – – NON 0 to 30 5” 3/4” 13/16” – – –
NON 35 to 60 3” 3/4” 13/16” – – – NON 35 to 60 5-1/2” 1” 1-1/16” – – –
NON 70 to 100 5-7/8” 1” – 1/8” 3/4” 1” NON 70 to 100 7-7/8” 1-1/4” – 1/8” 3/4” 1”
NON 110 to 200 7-1/8” 1-1/2” – 3/16” 1-1/8” 1-3/8” NON 110 to 200 9-5/8” 1-3/4” – 3/16” 1-1/8” 1-3/8”
NON 225 to 400 8-5/8” 2” – 1/4” 1-5/8” 1-7/8” NON 225 to 400 11-5/8” 2-1/2” – 1/4” 1-5/8” 1-7/8”
NON 450 TO 600 10-3/8” 2-1/2” – 1/4” 2” 2-1/4” NON 450 TO 600 13-3/8” 3” – 1/4” 2” 2-1/4”

DUAL-ELEMENT TIME-DELAY FUSES


These fuses have an interrupting rating of 200,000 amperes rms These fuses have an interrupting rating of 300,000 amperes rms
symmetrical. Underwriter’s Laboratories, Inc. CLASS Rk5 Req. symmetrical. Underwriter’s Laboratories, Inc. CLASS Rk5 Req.

FNR-R or LPN-RK_SP FRS-R or LPS-RK_SP

Dia. Dia. Contact Blade Lbs. Dia. Dia. Contact Blade Lbs.
Length of Over Thick- per Length of Over Thick- per
Amperes Overall Tube Ferrules ness Width Length 100 Amperes Overall Tube Ferrules ness Width Length 100
1/10, 15/100, 2/10, 3/10, 4/10, 1/2, 1/10, 15/100, 2/10, 3/10, 4/10, 1/2,
6/10, 8/10, 1, 1-1/8, 1-1/4, 1-4/10, 6/10, 8/10, 1, 1-1/8, 1-1/4, 1-4/10,
1-6/10, 1-8/10, 2, 2-1/4, 2-1/2, 2-8/10, 2” 1/2” 9/16” – – – 5 1-6/10, 1-8/10, 2, 2-1/4, 2-1/2, 2-8/10, 5” 3/4” 13/16” – – – 16
3-2/10, 3-1/2, 4, 4-1/2, 5, 5-6/10, 3-2/10, 3-1/2, 4, 4-1/2, 5, 5-6/10,
6-1/4, 7, 8, 9, 10, 12, 15, 17-1/2, 6-1/4, 7, 8, 9, 10, 12, 15, 17-1/2,
20, 25, 30 20, 25, 30
35, 40, 45, 50, 60 3” 3/4” 13/16” – – – 12 35, 40, 45, 50, 60 5-1/2” 1” 1-1/16” – – – 26
70, 80, 90, 100 5-7/8” 1” – 1/8” 3/4” 1” 35 70, 80, 90, 100 7-7/8” 1-1/4” – 1/8” 3/4” 1” 56
110, 125, 150, 175, 200 7-1/8” 1-1/2” – 3/16” 1-1/8” 1-3/8” 88 110, 125, 150, 175, 200 9-5/8” 1-3/4” – 3/16” 1-1/8” 1-3/8” 125
225, 250, 300, 350, 400 8-5/8” 2” – 1/4” 1-5/8” 1-7/8” 182 225, 250, 300, 350, 400 11-5/8” 2-1/2” – 1/4” 1-5/8” 1-7/8” 305
450, 500, 600 10-3/8” 2-1/2” – 1/4” 2” 2-1/4” 304 450, 500, 600 13-3/8” 3” – 1/4” 2” 2-1/4” 480

World Cooper Bussmann


leader Box 14460, St. Louis, MO 63178
in fuses Tel: (636) 527-3877 • Fax: (636) 527-1343
and accessories E-Mail: fusebox@cooperbussmann.com • www.cooperbussmann.com

Available through Electrical and Electronic Parts Distributors and Ship Chandlers in all U.S. and many Foreign Ports.
0253-03 4/28/06 4:09 PM Page 1

257-06

COOPER BUSSMANN
FAST-ACTING FUSES
200,000 Ampere Interrupting Rating
Listed by Underwriters Laboratories, Inc. as Class K1, Class L, and RK1 fuses

U.L. Class RK1 Current-Limiting Fuses Ampere


For Use in Rejection Fuse Clips Symbol Rating A B C D
KTN-R 70-100 5-7/8” 1/2” 23/64” 9/32”
or Ordinary Fuse Clips (250V a-c) 110-200 7-1/8” 11/16” 35/64” 9/32”
KTN-R (250V a-c) and KTS-R (600V a-c) fuses have the same 225-400 8-5/6” 15/16” 51/64” 13/32”
electrical characteristics as the KTN and KTS fuses. However, 450-600 10-3/8” 1-1/8” 63/64” 17/32”
KTN-R and KTS-R LIMITRON Fast-Acting Fuses are Class RK1 KTS-R 70-100 7-7/8” 1/2” 23/64” 9/32”
rejection type fuses. (600V a-c) 110-200 9-5/8” 11/16” 35/64” 9/32”
225-400 11-5/8” 15/16” 51/64” 13/32”
Groove 450-600 13-3/8” 1-1/8” 63/64” 17/32”

For D-C applications KWN-R and KWS-R


0 to 60 ampere A-C and D-C Rated 1 to 600 Amperes
KTN-R and KTS-R
The KWN-R and KWS-R fuses are listed by Underwriters Laboratories,
Ampere Inc. as Class K1 fuses to interrupt 200,000 amperes at 250 volts a-c and
Symbol Rating A B C D E 600 volts a-c respectively. The D-C interrupting rating is 100,000
KTN-R 0-30 2” 5/32” 3/8” 5/64” 9/16” amperes at 250 volts for the KWN-R and at 600 volts for the KWS-R.
(250V a-c) 35-60 3” 3/16” 5/8” 3/32” 13/16”
KTS-R 0-30 5” 3/16” 5/6” 3/32” 13/16” KWN-R 250v. a-c and d-c KWS-R 600v. a-c and d-c
(600V a-c) 35-60 5-1/2” 1/4” 7/8” 3/32” 1-1/16”
Slot

0-60 ampere
KWN-R and KWS-R
70-600 ampere
KWN-R and KWS-R

70 to 600 ampere The dimensions and standard ampere ratings of the KWN-R
KTN-R and KTS-R and KWS-R fuses are the same as those of the KTN-R and
KTS-R respectively, shown above.

FUSEHOLDERS

MIL Military Type Electrical Fuse Basic


Specification Designation Rating Accommodated Design
FHN55W FHN23W FHN26G1
MIL-F-19207/10 FHN19G 15A, 250V F05, F06 HCM*
MIL-F-19207/11 FHN20G 20A, 250V F02, F03 HTA*
MIL-F-19207/12 FHL22W 20A, 250V F10 HPF*C*
Panel mounted, extractor post type electrical fuseholders. Type FHL MIL-F-19207/13 FHN23W 30A, 250V F60, F09 HPC-D*
is indicating and FHN is non indicating. The U is unsealed, the G is MIL-F-19207/16 FHN26G1 30A, 250V F02, F03 HKP*
dripproof, the W is waterproof. FHL29G-1 30A, 12-22V F02, F03
FHL29G-2 30A, 23-33V F02, F03
MIL Military Type Electrical Fuse Basic MIL-F-19207/18 FHL29G-3 30A, 34-45V F02, F03 HGN-CI*
Specification Designation Rating Accommodated Design FHL29G-4 30A, 46-60V F02, F03
MIL-F-19207/1 FHL 10U 30A, 90-250V F02, F03 HGA-C* FHL29G-5 30A, 61-80V F02, F03
MIL-F-19207/2 FHL11U 30A, 90-250V F02, F03 HGB-C* FHL29G-6 30A, 81-90V F02, F03
MIL-F-19207/3 FHL12U 30A, 90-500V F60, F07, F09 HGC* FHL30G-1 30A, 12-22V F02, F03
MIL-F-19207/8 FHL17G1 20A, 90-250V F02, F03 HKL* FHL30G-2 30A, 23-33V F02, F03
FHL18G1-1 20A, 12-22V F02, F03 MIL-F-19207/19 FHL30G-3 30A, 34-45V F02, F03 HGF-C*
FHL18G1-2 20A, 23-33V F02, F03 FHL30G-4 30A, 46-60V F02, F03
FHL18G1-3 20A, 34-45V F02, F03 FHL30G-5 30A, 61-80V F02, F03
FHL18G1-4 20A, 46-60V F02, F03 FHL30G-6 30A, 81-90V F02, F03
MIL-F-19207/9 FHL18G1-5 20A, 61-80V F02, F03 HKX* MIL-F-19207/20 FHN31G1 5A, 250V F01 HJM*
FHL18G1-6 20A, 81-90V F02, F03 MIL-F-19207/26 FHN42W 5A, 125V FM01 HWA-AF*
FHL18G1-7 20A, 2.5-4V F02, F03 MIL-F-19207/36 FHN55W 30A, 250V F02, F03 HKP/RFI*
FHL18G1-8 20A, 5-7V F02, F03 MIL-F-19207/38 FHL57G 15A, 125V F77A
FHL18G1-9 20A, 8-12V F02, F03 MIL-F-19207/39 FHL58G 15A, 125V F77A

www.manning-electric.com
Stocking Distributor for
Cooper Bussmann

154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
254 4/28/06 4:10 PM Page 254

258-06

COOPER BUSSMANN
1/4 x 1 inch FUSES 1/4 X 1-1/4 inch FUSES
GLASS TUBE (Continued)
Formerly called 8AG. INDICATING
AGX fuses are listed by Underwriters’ Laboratories, Inc.
125 Volt sizes listed by Underwriters’ Laboratories, Inc.
Fibre tube, silver-plated indicating pin extends
from end of fuse when fuse is blown.
AGX 1/500 TO 1/32 amp. AGX 1/16 to 2 amp. GLD fuses in sizes larger than 5 amperes
MKB 1/16 and 1/8 amp. have a dual tube construction.
Provide high speed action necessary to protect
sensitive instruments or delicate apparatus.
GBA FUSES
GBA fuses are the same as GLD fuses
Voltage Symbol Amperes EXCEPT that the indicating pin is RED.
250 or less AGX 1/500, 1/200, 1/100, 1/32, 1/16,
Voltage Symbol Amperes
1/10, 1/8, 3/16, 2/10, 1/4, 3/8, 4/10,
125 or less GLD 3/4, 1, 1-1/2, 2, 3, 4, or 5
1/2, 3/4, 1, 1-1/2 or 2 32 or less GLD 6, 8, 10, 12, 15, 20, 25 or 30
250 or less MKB 1/16 or 1/8 IBM now called GLD.
MJB & MJW fuses now called AGX. GBA fuses have same electrical and physical characteristics as BUSS GLD fuses
125 volt sizes listed by Underwriters’ Laboratories, Inc. and are made in the same ampere sizes up to 5 ampere. These sizes are listed by
Voltage Symbol Amperes the Underwriters’ Laboratories, Inc.
125 or less AGX 3, 4, or 5
To specify: give symbol GBA and amperes.
32 or less AGX 8, 10, 15, 20, 25 or 30
AGX fuses also available under MIL-F 15160/1 DUAL-ELEMENT GLASS TUBE – SLOW BLOWING FUSES

1/4 x 1-1/4 inch FUSES


GLASS TUBE
1/100 and 1/32 amp. MDL 1/16 to 2 amp. MDL
Formerly called 3AG.
AGC fuses are listed by Underwriters’ Laboratories, Inc.

2-1/2 to 30 amp. MDL 1-1/4 to 7 amp. MDX


AGC 1/500 to 1/32 amp. 1/16 to 2 amp. MDL 0 to 2-8/10 amperes and MDX 0 to 7 amperes listed by
MGB 1/16 and 1/8 amp. Underwriters’ Laboratories, Inc. MDL fuses have longer time-lag
Voltage Symbol Amperes than MDX fuses.
250 or less AGC 1/500, 1/200, 1/100, 1/32, 1/16, 1/8, 15/100, Voltage Symbol Amperes
175/1000, 3/16, 2/10, 1/4, 3/10, 3/8, 45/100, 250 or less MDL 1/100, 1/32, 1/16, 1/10, 1/8, 15/100,
1/2, 6/10, 3/4, 1, 1-1/4, 1-1/2, 1-6/10, 2 175/1000, 3/16, 2/10, 1/4, 3/10, 3/8,
AGC fuses also available under MIL-F 15160/2 4/10, 1/2, 6/10, 7/10, 3/4, 8/10 or 1
250 or less MGC 1/16 or 1/8 250 or less MDX 1-1/4, 1-1/2, 1-6/10, 1-8/10 or 2
MBW & MBB Fuses now called AGC. 125 or less MDL 1-2/10, 1-1/4, 1-1/2, 1-6/10, 2, 2-1/2 or
2-8/10
125 or less MDX 3, 3-2/10, 4, 5, 6-1/4 or 7
MELAMINE TUBE 32 or less MDL 3, 3-2/10, 4, 5, 6-1/4, 8, 10, 15, 20, 25 or 30
These are high interrupting capacity fuses for
use on circuits capable of delivering currents MDL fuses also available under MIL-F 15160/2
as high as 25,000 amperes at 125 volts or 13/32 x 1-1/2 inch FUSES
10,000 amperes at 250 volts.
Voltage Symbol Amperes
250 or less MBO 1, 2, 3, 4, 5, 6, 8, 10 or 15
125 or less MBO 20, 25 or 30

CERAMIC TUBE LAMINATED TUBE TYPE


Listed by Underwriters’ Laboratories, Inc., 15 amps. and less. Often called “midget type”.
These are high interrupting capacity fuses for 250 volt sizes listed by Underwriters’ Laboratories, Inc.
use on circuits capable of delivering currents as Voltage Symbol Amperes
high as 25,000 amperes at 125 volts or 10,000 250 or less BAF 1, 3, 6, 10 or 15
Formerly called 3AB amperes at 250 volts. 125 or less BAF 20, 25 or 30
Voltage Symbol Amperes
250 or less ABC 1/4, 1, 2, 3, 5, 6, 8, 10, 12, 15 or 20 FIBRE TUBE TYPE
125 or less ABC 25 or 30 Voltage Symbol Amperes
ABC fuses also available under MIL-F 15160/3 250 or less BAN 1, 3, 6, 10, 15, 20, 25 or 30

World Cooper Bussmann


leader Box 14460, St. Louis, MO 63178
in fuses Tel: (636) 527-3877 • Fax: (636) 527-1343
and accessories E-Mail: fusebox@cooperbussmann.com • www.cooperbussmann.com

Available through Electrical and Electronic Parts Distributors and Ship Chandlers in all U.S. and many Foreign Ports.
255 4/28/06 4:11 PM Page 1

259-06

COOPER BUSSMANN
13/32 x 1-1/2 inch FUSES 13/32 x 1-1/2 inch FUSES
(Continued) (Continued)
VISUAL INDICATING TYPE – FIBRE TUBE
0 to 15 ampere sizes listed by Underwriters’ Laboratories, Inc.
Red button on indicating pin
extends from end of fuse Voltage Symbol Amperes
when fuse is blown. Made in 250 or less FNA 1/10, 15/100, 2/10, 3/10, 4/10, 1/2,
accordance with Navy
Specifications. 6/10 or 8/10
125 or less FNA 1, 1-1/8, 1-1/4, 1-4/10, 1-6/10, 1-8/10,
Voltage Symbol Amperes 2, 2-1/4, 2-1/2, 2-8/10, 3, 3-2/10, 3-
250 or less MIN 1, 2, 3, 5, 10 or 15 1/2, 4, 4-1/2, 5, 5-6/10, 6, 6-1/4, 7, 8,
125 or less MIN 20, 25 or 30 10, 12 or 15
32 or less FNA 20, 25, or 30
FAST-ACTING HIGH
INTERRUPTING CAPACITY
13/32 x 1-3/8 inch FUSES
BBS FUSES
600 VOLT
Fibre tube. Designed for the protection of control circuits, gaseous vapor
Type KTK fuses are for protection of control circuits, gaseous vapor fixture fixture circuits, or wherever a fuse with “quick-blowing” characteristics is
circuits or any circuit having fault current capacity up to 100,000 amperes, desirable. Listed by the Underwriters’ Laboratories, Inc.
AC only. Listed by Underwriters’ Laboratories Inc.
0 to 15 ampere sizes listed by Canadian Standards Assn. Voltage Symbol Amperes
Voltage Symbol Amperes 600 or less BBS 4/10, 3/4, 8/10, 1, 2, 3, 4 or 5
600 or less KTK 1/10, 1/8, 2/10, 1/4, 3/10, 1/2,
3/4, 1, 1-1/2, 2, 3, 4, 5, 6, 8, 10,
15, 20, 25 or 30. WATERPROOF FUSEHOLDER
Type KLM is the military version of Type KTK fuses, made in conformity and
tested to meet the requirements of Specification MIL-F-15160-D. They have
an interrupting rating on voltages of 500 of 100,000 amperes AC or DC.
Available in same ampere ratings as Type KTK fuses. In-the-Line Waterproof fuseholders
DUAL-ELEMENT FIBRE
Fuseholder Crimp Type AWG COPPER Wire Size
TUBE – SLOW BLOWING Symbol Terminals Symbol Terminal will take
They have a fuse link which operates One #14, 12, 10 or 8 solid or stranded
only on very high overloads or short- A wire
circuits – they have a thermal cutout HEB Two #14 or 12 solid or stranded wires
which functions on low overloads – Takes 13/32 x
One #6 or 4 solid wire
the thermal cutout cannot operate 1-1/2 inch fuse -
at rated voltage B One #6 stranded wire
125 and 250 volt sizes listed by quickly at any load, hence long time- of fuse - up to Two #10 solid or stranded wires
Underwriters’ Laboratories, Inc. lag is obtained. 600 volts. C Two #8 solid or stranded wires
Voltage Symbol Amperes (KTK, FNM, One #4 stranded wire
BAF, etc., fuses) D Two #6 solid or stranded wires
250 or less FNM 1/10, 15/100, 2/10, 3/10, 4/10, 1/2,
One #2 stranded wire
6/10, 8/10, 1, 1-1/8, 1-1/4, 1-4/10,
E Two #4 solid or stranded wires
1-6/10, 1-8/10, 2, 2-1/4, 2-1/2, 2-8/10, Set Screw Type Copper For Copper
3-2/10, 3-1/2, 4, 4-1/2, 5, 5-6/10, 6-1/4, Connector Terminal Symbol Wire or Cable
7, 8, 9 or 10 HEJ J One #12 to #2 solid or stranded wire
125 or less FNM 12 or 15 Takes 13/32 x K Two #12 to#2 solid or stranded wire
32 or less FNM 20, 25 or 30 2-1/4 inch fuse - Set Screw Type Aluminum For Aluminum
at rated voltage of Connector Terminal Symbol Wire or Cable
FNM fuses also available under MIL-F 15160/9 fuse - up to L One #12 to #2 solid or stranded wire
1200 volts.
(SC35 to SC60 Y Two #12 to #2 solid or stranded wires
SIGNAL OR VISUAL INDICATING TYPE W Solid copper terminal for breakaway
HVW1/2 to
FNA are FNM FUSETRON dual- HVW6, etc., fuse) receptacle
element fuses with silver-plated Fuseholders can readily be adapted to take aluminum wire or cable.
indicating pin which extends from
fuse when fuse is blown.
Fuses in sizes larger than 10 ampere
have a dual tube construction.

World Cooper Bussmann


leader Box 14460, St. Louis, MO 63178
in fuses Tel: (636) 527-3877 • Fax: (636) 527-1343
and accessories E-Mail: fusebox@cooperbussmann.com • www.cooperbussmann.com

Available through Electrical and Electronic Parts Distributors and Ship Chandlers in all U.S. and many Foreign Ports.
0244-04 4/28/06 4:12 PM Page 1

260-06

CARBON BRUSHES
Grade General Service Applications Grade General Service Applications
SA-35 For large and medium size D.C. commutating machines 255 A general purpose brush suitable for machines having
having high surface speeds and where loads are heavy. moderate loads and speeds and normal commutating
SA-3538 Applicable to D.C. commutating machines where load conditions.
conditions are fairly light. AY A graphitic grade for bronze slip rings where the current
SA-45 For D.C. commutating machines where heavy loads density does not exceed 75 amps per sq. in.
and general operating conditions require a brush having AYK Contains approximately 35% copper and is
the highest commutating ability. recommended for bronze slip ring applications where
the current density does not exceed 90 amps per sq. in.

TERMINALS

SL 1 SL 2 SL 20 SL 21 SL 34 SL 38

Type O Type S
Type S Type O Flag Flag

SL 39 SL 46 SL 53 SL 71 SL 85 SL 86

Type S Type O Type GE Bent


Tube Tube Tube Tube

SL 92 SL 96 SL 97 SL 98 SL 99 SL 100

Plug Type Type S Type


Yoke Whse.
Yoke

SL 101 SL 106 SL 108 SL 109 SL 113 SL 115

SHUNT LENGTHS

SL 116 SL 117 SL 118 AT-XA* Z** G.E.


Roll
Type

*Angular A. Cable fixed to Clip. Clip riveted to brush. **Cables fixed to metal plates. Plates riveted to brush.

When ordering Carbon Brushes, state style number C


as shown and the following information:
• Length, width & thickness, shown as A, B, C in the B
illustration at right.
• Kind of terminal, fork, flag, or pin type and size.
• Bevel, if any, top and bottom (see illustration at right). Bevel Degree
A
• Voltage, amperage, direct or alternating current.
• Length of shunt (see illustration at right). A = Length B = Width C = Thickness

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0229-04 4/28/06 4:13 PM Page 1

261-06

COMMUTATOR RESURFACERS
Pocket-Type Small Motor-Type Precision Grinder
Resurfacer 80-112 Resurfacer 80-012

Size in Inches Grades Catalog No.


3/4 x 1/2 x 3/8 A,B,D,G,H 80 - 012*
Size in Inches Grades Catalog No. * Add grade letter suffix to Cat. No.
2x1x6 A,B,D,G,H 80 - 112*
2x1x8 80 - 137*
* Add grade letter suffix to Cat. No. Pencil-Type
Resurfacer 80-075
Adjustable-Handle
Resurfacer 80-224
Size in Inches Grades Catalog No. Designed for right-angle drive. Can also be converted to straight
5/8 x 3/8 x 6 X,C,M,F,P 80 - 075* drive arrangement, or reassembled for left or right-hand operations.
* Add grade letter suffix to Cat. No. NOTE: The precision grinder comes complete with carrying case.
Grinders with overall lengths up to and including 13-1/2“ require
two (2) brush arm supports. All others require three (3) brush arm
supports. All grinders require two (2) tool type resurfacers (80-475
Size in Inches Grades Catalog No. recommended). Order supports and resurfacers separately.
Saw-Handle
2 x 1-1/2 x 2 X,C,M,F,P 80 - 205*
2x2x2 80 - 215* Resurfacer 80-393 Over-All Length Base For Max. Catalog No.
3x2x2 80 - 224* Length Commutator Width **
3x3x2 80 - 234* 7-1/2“ 6“ 10-1/2“ 24 - 018
4x3x2 80 - 243* 9-1/2“ 8“ 12-1/2“ 24 - 019
* Add grade letter suffix to Cat. No. 11-1/2“ 10“ 14-1/2“ 24 - 020
13-1/2“ 12“ 16-1/2“ 24 - 021
16“ 14“ 18-1/2“ 24 - 022
18“ 16“ 20-1/2“ 24 - 023
Railway-Handle 20“ 18“ 22-1/2“ 24 - 024
Resurfacer 80-324 Sizes in Inches Grades Catalog No. 6“ Extension Handle 24 - 034
4x1x3 X,C,M,F,P 80 - 353* NOTE: Longer lengths available as specials in 2“ increments up
4 x 1-1/2 x 3 80 - 357* to 4“ base length.
4x3x2 80 - 362* **These dimensions include an extra 1-1/2“ of travel obtained
by setting the resurfacers at a slight angle.
4x4x3 80 - 366* Overall length does not include hand wheel assembly.
5x2x2 80 - 371*
5x2x3 80 - 376*
5x3x2 80 - 380*
5x3x3 80 - 385* Midget Precision
6x2x3 80 - 389* Grinder 24-033
Size in Inches Grades Catalog No. 6x4x3 80 - 393*
2 x 1-1/2 x 2 X,C,M,F,P 80 - 305* 8x4x3 80 - 397*
2x2x2 80 - 315* * Add grade letter suffix to Cat. No.
3x2x2 80 - 324*
3x3x2 80 - 334*
4x3x2 80 - 343*
* Add grade letter suffix to Cat. No. Double Saw-Handle
Resurfacer 80-444

Tramway-Handle Designed for use on commutators having a face width of 8“ or less,


as well as for use on medium-sized slip rings. Its small size allows
Resurfacer 80-274 operation in very small places.
In-feed and cross-feed carriage ways are carefully machined and
ground to close-fitting tolerances. Clog-free cross-feed rack and
pinion permits working in narrow spaces where motor end bells or
brush yokes prevent the use of a cross-feed screw parallel to the
Size in Inches Grades Catalog No. axis of the machine.
4x8x3 X,C,M,F,P 80 - 407*
5x7x3 80 - 419* The standard base length is 6“ and is recommended for commutator
Size in Inches Grades Catalog No. widths up to 9-1/4“. This includes an extra 1“of travel obtained by
5x9x3 80 - 432* setting the resurfacers at a slight angle.
2 x 1-1/2 x 2 X,C,M,F,P 80 - 255* 6 x 10 x 3 80 - 444*
2x2x2 80 - 265* NOTE: The Midget grinder comes complete with carrying case.
* Add grade letter suffix to Cat. No.
3x2x2 80 - 274* Order tool-type resurfacers (80-454 recommended -2 required) and
3x3x2 80 - 284* brush arm supports separately.
4x3x2 80 - 293*
Description Catalog No.
* Add grade letter suffix to Cat. No. Tool-Type Midget Precision Grinder 24 - 033
Resurfacer 80-468

Straight-Handle Flexible
Resurfacer 80-184 Abrasive
82-004
Size in Inches Grades Catalog No.
3/4 x 3/4 x 3 X,C,M,F,P 80 - 504*
1 x 1-1/2 x 6-1/2 80 - 454* Size in Inches Catalog No.
Size in Inches Grades Catalog No. 1x2x8 80 - 461* 3/8 x 1/2 x 5 82 - 001
1x1x1 X,C,M,F,P 80 - 155* 1-1/2 x 2-1/2 x 8 80 - 468* 3/8 x 3/4 x 5 82 - 002
1x1x2 80 - 165* 2x2x8 80 - 475* 5/8 x 1 x 5 82 - 003
2x1x1 80 - 174* 1 x 1-1/2 x 11 80 - 482* 1x2x5 82 - 004
2x1x2 80 - 184* 1-1/2 x 2-1/2 x 11 80 - 489* 1x4x5 82 - 005
3x1x2 80 - 193* 2 x 2 x 11 80 - 496* 1/8 x 1 x 5 82 - 006
* Add grade letter suffix to Cat. No. * Add grade letter suffix to Cat. No.

290 Murray Street 3726 Parker Street


Cambridge Montreal, QC H3C 2E2 Burnaby, BC V5C 3B1
Canada Canada
Agencies Ideal Telephone: (514) 875-5700 Telephone: (604) 205-0057
Limited Fax: (514) 875 8638 Fax: (604) 205-0027
Toll Free: 1-877-875-0057
Please see our ad in the Advertising Section E-mail: info@cambridgeagencies.com
0282-03 4/28/06 4:14 PM Page 282

262-06

RELAYS
Auxiliary relays, with 3 NO and 2 NC contacts
Cat.No. Volts Hz Type
443712 110 50/60 CAD-32F7
443716 230 50/60 CAD-32P7
CONTACTORS 443720 400 50/60 CAD-32V7
3-pole, with 1 NO and 1 NC auxiliary contact 443724 440 50/60 CAD-32R7
9A (AC3) Cat.No. Volts Hz Type Auxiliary relays, with 5 NO contacts
443102 110 50/60 LC1-D09F7 Cat.No. Volts Hz Type
443106 230 50/60 LC1-D09P7 443832 110 50/60 CAD-50F7
443110 400 50/60 LC1-D09V7 443836 230 50/60 CAD-50P7
443114 440 50/60 LC1-D09R7 443840 400 50/60 CAD-50V7
443844 440 50/60 CAD-50R7
12A (AC3) Cat.No. Volts Hz Type Coils for contactors LC1 D09/38 and auxiliary relays CAD
443212 110 50/60 LC1-D12F7 Cat.No. Volts Hz Type
443216 230 50/60 LC1-D12P7 444009 24 50/60 LXD-1B7
443220 400 50/60 LC1-D12V7 444014 110 50/60 LXD-1F7
443224 440 50/60 LC1-D12R7 444018 230 50/60 LXD-1P7
444022 400 50/60 LXD-1V7
18A (AC3) Cat.No. Volts Hz Type 444026 440 50/60 LXD1-R7
443272 110 50/60 LC1-D18F7 Coils for contactors LC1 D40/95
443276 230 50/60 LC1-D18P7 444134 110 50/60 LX1-D6F7
443280 400 50/60 LC1-D18V7 444138 230 50/60 LX1-D6P7
443284 440 50/60 LC1-D18R7 444142 400 50/60 LX1-D6V7
444146 440 50/60 LX1-D6R7
25A (AC3) Cat.No. Volts Hz Type Thermal overload relays for contactors LC1 D09 to LC1 D38
443322 110 50/60 LC1-D25F7 Cat.No. Current setting range Type
443330 230 50/60 LC1-D25P7 444304 0,63-1 A LRD-05
443334 400 50/60 LC1-D25V7 444305 1-1,7 A LRD-06
443338 440 50/60 LC1-D25R7 444314 1,6-2,5 A LRD-07
444318 2,5-4 A LRD-08
32A (AC3) Cat.No. Volts Hz Type 444322 4-6 A LRD-10
443386 110 50/60 LC1-D32F7 444326 5,5-8 A LRD-12
443390 230 50/60 LC1-D32P7 444330 7-10 A LRD-14
443394 400 50/60 LC1-D32V7
443398 440 50/60 LC1-D32R7
THERMAL OVERLOAD RELAYS for contactors
Cat.No. Setting range Type For contactor
40A (AC3) Cat.No. Volts Hz Type
444334 9-13 A LRD-16 LC-1D12/38
443446 110 50/60 LC1-D40F7 444338 12-18 A LRD-21 LC-1D18/38
443450 230 50/60 LC1-D40P7 444344 16-24 A LRD-22 LC-1D25/38
443454 400 50/60 LC1-D40V7 444348 23-32 A LRD-32 LC-1D25/38
443458 440 50/60 LC1-D40R7 444396 23-32 A LRD-3353 LC-1D40/95
444400 30-40 A LRD-3355 LC-1D40/95
50A (AC3) Cat.No. Volts Hz Type 444404 37-50 A LRD-3357 LC-1D50/95
443506 110 50/60 LC1-D50F7 444408 48-65 A LRD-3359 LC-1D50/95
443510 230 50/60 LC1-D50P7 444412 55-70 A LRD-3361 LC-1D50/95
443514 400 50/60 LC1-D50V7 444415 63-80 A LRD-3363 LC-1D80/95
443518 440 50/60 LC1-D50R7 444418 80-104 A LRD-3365 LC-1D80/95
SUPPORT for separate mounting of thermal relays
65A (AC3) Cat.No. Volts Hz Type Cat No. Description
443568 110 50/60 LC1-D65F7 444507 Type LAD-7B10 for thermal relay LRD-01…35
443570 230 50/60 LC1-D65P7 and LR3-D01…D35
443574 400 50/60 LC1-D65V7 AUXILIARY CONTACT BLOCKS for contactors LC-1.. and auxiliary
443578 440 50/60 LC1-D65R7 relays CAD32..
Cat.No. Composition Type
80A (AC3) Cat.No. Volts Hz Type 444572 1 NO LAD-N10
443580 110 50/60 LC1-D80F7 444576 1 NO LAD-N01
443585 230 50/60 LC1-D80P7 444580 1 NO and 1NC LAD-N11
443587 400 50/60 LC1-D80V7 444584 2 NO and 2NC LAD-N22
443590 440 50/60 LC1-D80R7 444588 4 NO LAD-N40
444592 4 NC LAD-N04
95A (AC3) Cat.No. Volts Hz Type TIME DELAY CONTACT BLOCKS with 1 NO and 1 NC contact for contactors
443599 110 50/60 LC1-D95F7 LC1…and auxiliary relays CAD…
443602 230 50/60 LC1-D95P7 Cat.No. Description
443604 400 50/60 LC1-D95V7 444651 0,1 to 30 s on energisation type LADT-2
443608 440 50/60 LC1-D95R7 444657 10 to 180 s on energisation type LADT-4
444663 0,1 to 30 s on de-energisation type LADR-2
444669 10 to 180 s on de-energisation type LADR-4

Kerger Marine Electric, Inc. We stock a complete line of Telemecanique TeSys® Head Office: Kerger & Co. B.V.
4350 South Wayside Drive, Suite 104 Fokkerstraat 515
Houston, TX 77087 contactors and relays 3125 BD Schiedam
Phone: (713) 643-3326 The Netherlands
Fax: (713) 643-6683 Visit our Website for more information: www.kerger.com Phone: 31-104374500
(800) 328-3670 Fax: 31-104376825
E-mail: saleshouston@kerger.com ALL MAIN EUROPEAN PARTS AVAILABLE IN SHORT TIME E-mail: sales@kerger.nl
0257-03 4/28/06 4:15 PM Page 1

263-06

International Protection Codes For Electrical Equipment


PROTECTION AGAINST CONTACT PROTECTION AGAINST THE MECHANICAL PROTECTION
OF EXTERNAL SOLIDS PENETRATION OF LIQUIDS AGAINST IMPACT
1st number 2nd number 3rd number
Description Description Description
characteristic characteristic characteristic
Without Without Without
0 protection 0 protection 0 protection

Protection Resistance to
Protection
against solid impacts of a
against vertical
1 bodies of 1 falling of water 1 weight of 150 g.
dimensions falling from
drops
above 50 mm 15 cm

Protection
Protection Resistance to
against falling
against solid impacts of a
of water drops
2 bodies of 2 with a 15° 2 weight of 150 g.
dimensions falling from
maximum
above 12 mm 25 cm
inclination

Protection Resistance to
against solid impacts of a
Protection
3 bodies of 3 against rain 3 weight of 250 g.
dimensions falling from
above 2.5 mm 20 cm

Protection Resistance to
Protection
against solid impacts of a
against
4 bodies of 4 sprinklings 5 weight of 500 g.
dimensions falling from
of water
above 1 mm 40 cm

Resistance to
Protection impacts of a
Protection
5 against dust 5 against jets 7 weight of 1.5 kg.
of water falling from
40 cm

Resistance to
Complete
impacts of a
protection Protection
6 against dust 6 against waves 9 weight of 5 kg.
falling from
(dustproof)
40 cm

Protection
against
immersion under
7 predetermined
pressure and
time conditions
Protection against
immersion under
predetermined
8 pressure
conditions
for unlimited time
1st number characteristics defined by the CEI 70-1, 2nd number characteristics defined by the CEI 70-1, 3rd number characteristics defined by the
IEC 529, IEC 144, UTE C 20-010, DIN 40050 standards. IEC 529, IEC 144, UTE C 20-010, DIN 40050 standards UTE C 20-010 French standards

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0258-03 4/28/06 4:15 PM Page 1

264-06

KARL DOSE GmbH


EUROPEAN ELECTRICAL FITTINGS
EXPLOSIONPROOF ROTARY SWITCH EXPLOSIONPROOF JUNCTION BOXES
Protection IP 56 Protection IP 56
Certificate: PTB Nr. Ex-83/1026 Certificate: PTB Nr. Ex-82/3164
acc. EN 500 14-1977/VDE 0171 acc. EN 50014-1977/VDE 0171
EN 500 18-1977/VDE 0171 EN 50019-1977/VDE 0171
EN 500 19-1977/VDE 0171 EEx e II T6
514 EEx de IIC T6 No. Diagram kg/piece
510-82 1,050
• Brass casing and cover • Undetachable inner hexagonal cover 510/2-82 1,050
screws • Pressure tight enclosed plastic switch insert • Single- 510/3 510/4 510/3-82 1,140
pole multi-circuit switch inserts are available 510/4-82 1,200
Rating and switching • Brass casing and cover • Undetachable inner hexagonal cover
No. Diagram arrangement kg/piece
screws • Steatite terminal block 4-pole, similar DIN 89 300 with
514 16 A 1,470 brass cover wedge terminals and reverse motion lock • Terminal
514/2 250 V ~ 1,550 suitable for up to 4 mm2, 500 V~– • Internal and external earthing
514/D 2 pole cut out 1,550
screw • Cable inlets M 24 x 1,5 with earthing insert DIN 89 345

EXPLOSIONPROOF LIGHT EXPLOSIONPROOF SOCKET


Casing: Protection IP 56 AND PLUG 16A CEE
Certificate: PTB Nr. III B/E-10 669 Ex-proof socket
acc. VDE 0171 in protection, • Casing and bajonet-cap of brass
“Increased safety” (Ex) e G 3 • Nominal voltage: 110V-130V 4h
220V-240V 6h
• Brass casing and guard • Guard and
guard ring secured by a M 4 triangular screw • Nominal current: 16A
• Pressuretight encased socket E 27 of • Number of poles: 2P + PE
505/2 ceramic insulating material • Insert of socket is
pressuretight enclosed
For Bulbs • Compulsory switching
No. Diagram up to Watt Socket kg/piece
arrangement with
505 60 Only available 2,500
505/2 60 with ex-socket 2,600
blocking system
505/D 60 E 27 2,600 Ex-proof plug
INTERNATIONAL APPROVAL MARKS • Number of poles: 2P + PE
516/D
No. Diagram
Belgium Denmark Germany Finland U.K. Italy Netherlands Norway Austria Sweden Czecho- Hungary 516/R
slovakia
EXPLOSIONPROOF INFORMATION 516/L
All explosionproof equipment has been tested 2. EN 50018 “PRESSURE-RESISTANT ENCLOSURE ’D’” 516/D
and certified by the Physikalisch Tachnische The flame-proof specification “pressure- 516/St Stecker Plug
Bundesanstalt (PTB) of Braunschweig to the resistant enclosure” requires that components
following European Standards: which might ignite a potentially explosive
EN 50014, EN 50018, EN 50019. atmosphere shall be sealed in an enclosure
The explosion protection programme specially that will withstand the internal pressure EXPLOSIONPROOF LIGHT UP TO 200 WATTS
designed for marine applications presently generated during the spreading of an
comprises the following features: explosive mixture inside the enclosure and • Casing of cast brass Rg 5
• junction boxes • sockets and plugs will prevent the spreading of the explosion
• switches • lights to the potentially explosive atmosphere up to 200 W
All explosionproof equipment meets the surrounding the building. • Protection: pressure resistant with
requirements of IP 56. Stringent individual In short:
quality tests carried out during production ensure “increased safety “‘e’” means to prevent an security switching arrangement
operational reliability and safety. The authority explosion. “Pressure-resistant enclosure “‘d’” • With lamp holder E27 or B22 please
in charge (such as the Seeberufsgenossenschaft – means to contain an explosion. In practice,
marine liability insurance association) basically both specifications are frequently used in indicate with order
combinations (e.g. the component where
decides how and to which extent operating
a spark might originate is housed in a • Temperature class: hanging
facilities are rated explosion-proof. Equipment
must be selected accordingly and must meet the pressure-resistant enclosure. The terminal installation
compartment with the terminals is designed
directives given by one or several flame-proof
specifications. The following two flame-proof to meet the specification “increased safety”). T4 – normal bulb up to 150 W
specifications would essentially be applicable: TEMPERATURE RANGES – metal alloy bulb up to 160 W
1. EN 50019 “INCREASED SAFETY ‘E’”
The flame-proof protection level “increased Temperature Ranges Max Surface Temperature 3312 – mercury vapour 80 W
safety” specification requires that measures T1 450°C T3 – normal bulb 200W
have been taken to prevent the risks of T2 300°C
excessively high temperatures and spark T3 200°C No. Diagram – mercury vapour 125 W
generation or arching inside internally or T4 135°C – fluorescent bulb E27 25 W
externally on electrical equipment more safely
T5 100°C 3312
where these risks would not occur during
T6 85°C
Also available in cast iron—#GG18
normal operation.

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0259-03 4/28/06 4:16 PM Page 1

265-06

KARL DOSE GmbH

EUROPEAN WATERTIGHT EQUIPMENT


HNA-JUNCTION BOXES SOCKETS FOR
DIN 89 250, 500 V 2 OR 3 CONNECTIONS
protection IP 56 2-pole, with safety contact, protection IP 56
No. Diagram kg/piece
100
110 0,680
111 0,760
112 0,850 229 a

No. Diagram kg/piece Voltage


110 111 112 No. up to Amp. kg/piece
100 0,775
107 0,580 129 150V for 2 2,500
110 a 0,700 229 250V 10 A = connections 2,500
129 a 150V 16 A ~ for 3 2,800
111 a 0,775
229 a 250V connections 2,800
112 a 0,800
110 a 111 a 112 a • Brass casing and cover
• Brass casing and cover • Undetachable cover screws M 6
• Steatit terminal block acc. DIN 89 300 • Screw cap of seawater-resistant plastic
with brass wedge terminals up to 2.5 mm2 material, reinforced with glass fibre
For delivery of the boxes with moulded • Steatit terminal block and steatit
• Undetachable cover screws M 6 compound cover, additional indication: Fs contact inserts DIN 89 320

LOCKING-TYPE SOCKETS AND PLUGS HNA-SWITCH


2-pole, with safety contact, protection IP 56 DIN 89 270, protection IP 56

• Brass casing and cover


• Undetachable cover screws M 6
• 1-pole cut-out insert with steatit bass and
brass-terminals including through terminal
DIN 89 322. At a supplementary charge
also available with 2-pole cut-out insert,
163/right hand 164 1-pole change-over, multi circuit- and
363/2-364
cross-insert available as well
• Brass casing, cover, screw • Steatit contact insert
cap and plug case, cap nut DIN 89 320
and threaded sleeve • The locking device prevents
• Undetachable cover insertion and pulling of the
screws M 6 plug under voltage
No. Diagram Amp. Voltage Switch Insert kg/piece
~ 117 119
163 16 A – 1,580
Design 1
163/2 16 A
~

preferable 1,720 118
163/D 16 A
~
– up to 1,625
~ 150 Volt 2-pole
164 plug 16 A –
cut-off 0,545 No. Diagram Amp. kg/piece
363 16 A
~
– switch 1,580 117 –
10 A ~ 0,710
~ Design 2 insert
363/2 16 A –
preferable 1,720 118 –
10 A ~ 0,830
363/D 16 A
~
– up to 1,625 118/3 –
10 A ~ 0,900
~ 250 Volt
364 plug 16 A – 0,545 119 –
10 A ~ 0,750
Available with right or left hand cable inlets
(Please state requirements when ordering.)

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0260-03 4/28/06 4:17 PM Page 260

266-06

KARL DOSE GmbH

EUROPEAN CARGO PLUGS & WATERTIGHT PLUG BOXES


POLARIZED A.E.G. GERMAN TYPE POLARIZED A.E.G. GERMAN TYPE
Cast Brass Box, and Cap, with Three Female Pin Holders fitted Cast Brass Box, and Cap, with Three Female Pin Holders fitted
into Steatite Interior. Complete with Double-Pole Snap Switch. into Steatite Interior. Cast Brass Plug with Three Pins fitted into
Cast Brass Plug with Three Pins fitted into Steatite Interior. Steatite Interior. Funnel shaped Gland with Brass Nipple and
Funnel shaped Gland with Brass Nipple and India-Rubber India-Rubber packing for Cable.
packing for Cable.

10 Amp. 250 Volt 10 Amp. 250 Volt

No. 115
No. 406 No. 162

No. 162

No. 116P No. 160


No. 431
No. 116P No. 160
No. 215
No. 430P

Catalog No. Description Catalog No. Description


POLARIZED CARGO PLUG BOX 215 W/T Receptacle with Grounding Pin
115 Cargo Plug Box, complete with Double Pole Drilled One-Way with 1/2” Pipe Thread
Switch, Drilled One-Way, with 1/2” Pipe Thread. 215/2 —as above—Drilled Two-Way
Will take 1/2” Stuffing Tube 215D —as above—Drilled Two-Way
115D —as above—Drilled Two-Way with 1/2” 431 Terminal Block for Polarized Receptacle
Pipe Thread. Will take 1/2” Stuffing Tubes
160 Interior for Polarized Receptacle
406 Double Pole Switch, with Knob 430P Brass Screw Cap and Chain
160 Interior for Polarized Plug Box POLARIZED CARGO PLUG
430P Screw Cap and Chain 116P Cargo Plug, complete with Nipple
POLARIZED CARGO PLUG and India-Rubber Packing
116P Cargo Plug, complete with Nipple 162 Interior for Polarized Plug
and India-Rubber Packing
162 Interior for Polarized Plug

POLARIZED A.E.G. GERMAN TYPE SPARE PARTS AND ACCESSORIES


CABLE CONNECTOR
Made of Cast Brass with Three Female Pin Holders fitted into Steatite For Plug Boxes and Cargo Plug
Interior. For use with Catalog No. 1458 Polarized Cargo Plug.

10 Amp.
250 Volt No. 421 No. 422

No. 216P No. 195


No. 160

Catalog No. Description Catalog No. Description


216P W/T Cable Connector, complete 421 Rubber Gasket
160 Interior for Cable Connector 422 Brass Threaded Ring
430P Brass Screw Cap and Chain 195 Brass Dummy Jack

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0261-03 4/28/06 4:18 PM Page 1

267-06

KARL DOSE GmbH

EUROPEAN ELECTRICAL FITTINGS


FLAT TYPE DECK LAMP STANDARD LIGHTS
Recommended Standard Specification 00 89 353 Recommended Standard Specification 00 89 350
Protective System IP 56 Protection IP 56
Heavy round cast brass
fixtures. These fittings can • Brass casing and guard
be supplied with or without • Glass: Clear, opal, red
cast metal guard. Glass has transparent covering
with pressed-in thread M 100 x 2
made of plastic
• For bulbs up to 60 watt

No. Diagram kg/piece


131 0,750
131/2 0,850
223/2 131/D 0,850
132 0,950
No. Diagram Maximum Bulb Wattage kg/piece 132/2 1,050
223/2 200 4,900 132/D 1,050

CEE SOCKET AND PLUG, 32 A AND 63 A


DIN 49 462/63 and CEE-Publication 17/2, Protective System IP 56
as well as IEC-Publication 309

No. Diagram Rating No. of Poles Design kg/piece

2005/P/St/3h Plug 32 A Plastic-sealed with plastic contact-inset, 0,305

2005/P/K/3h Coupling 500 V~ earthing contact in 3h position. 0,390


3-poles
Same as above, but with pilot-contact
2040 63 A/ +E 5,700
for electrical locking.
750 V~
2005/P/St/3h 2050 St Plug Cable inlets optional left or right hand. 3,000
2005/P/K/3h
2005/P/St
2040

No. Diagram Description

Brass casing
2005/R/MC MC-socket insert of steatite
With mechanical blocking system

Undetachable cover screws


2005/L/MC
Cable gland M 30 x 2

With plastic cap 2005 2050 St/2005 St


2005/D/MC
With new MC-contact inserts
2005/St — CEE-plug 32A of brass
2005/P/ST — As before, but of plastic CEE-socket with switch and locking device and plug
3-pole + E, 500 V, 32 A (Reefercontainer supply)

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0262-03 4/28/06 4:20 PM Page 1

268-06

Japanese Electrical Material Japanese Watertight


Lampholders Electrical Material (IP 56)
(JIS #F8401) Catalog No. 3-PIN CARGO PLUG BOX WITH SWITCH
MA112 Cargo Plug Box complete with Double-Pole Switch.
Drilled Two-way
MA101 MA102 MA103 MA104 MA105 MA113 Double-Pole Switch Interior.
Type Type Type MA114 Interior for Plug Box.
Catalog No. Of Socket Of Connection Of Material
MA115 Screw Cap and Chain.
E 12 Cast iron box with brass cap. 3-pin male interior. Complete with double-pole snap
MA101 (Candelabra) External Bakelite
switch. Cast brass plug with 3 female pin holders.
B 15
MA102 (Miniature Bayonet) External Bakelite

E 27
MA103 (Med. Edison Screw) External Porcelain
(JIS #F8833)
B 22 10 Amp.
MA104 (Standard Bayonet) External Porcelain
250 Volt
E 40
MA105 (Mogul Base) External Porcelain

3-Pin Cabin Plug and Receptacle


NOTE: Dimensions in millimeters
(JIS #F8831) MA112
SURFACE TYPE
Catalog No. 3-PIN CARGO PLUG BOX
MA116 Cargo Plug Box complete. Drilled Two-way
MA114 Interior for Plug Box
MA106 MA107 MA108 MA109 MA115 Screw Cap and Chain
Catalog No. Description Amperage Material Base Diameter Catalog No. 3-PIN CARGO PLUG
MA106 Plug 15 Bakelite — MA117 Cargo Plug, complete
MA107 Receptacle 15 Bakelite 56 mm. MA118 Interior for Plug
MA108 Plug 20 Bakelite — Cast iron box with brass cap. 3-pin male interior. Cast brass
MA109 Receptacle 20 Bakelite 64 mm plug with 3 female pin holders.

Toggle Switches (JIS #F8832)


10 Amp.
(JIS #F8840) 250 Volt

MA110 MA111 MA114


Outer Pins—6 mm
MA116 Center Pin—8 mm
Catalog No. Rating Type Base Diameter
MA110 5A / 250V Double-Pole 56 mm
MA111 10A / 250V Double-Pole 64 mm D1 H1 h D2 H2
46 55 30 74 70

Japanese Watertight Pendant Lights


Phenolic MA121
Cargo Plugs Outer Pins—6 mm
(Complete) Center Pin—8 mm
10 Amp., 250 Volts
Cast Brass with 3 Female Pin Holders

Catalog No. Description


MA120 W/T Plug, Type 1A
Model P1S1 Model SPB2 Model P1S2 MA121 Receptacle Interior, Type 1
25 Watt 60 Watt 60 Watt MA120
B-15 Socket E-26 Socket E-26 Socket
Ceiling Mounted Wall Mounted Ceiling Mounted

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0263-03 4/28/06 4:21 PM Page 1

269-06

European Fixtures Japanese Fixtures


Fluorescent Lighting Fixtures Incandescent Flood Lighting Fixtures
IP 67 Watertight Glow Starting Fixture IP 44 Class of Protection
With Hinged Reflective Cover
Material: Body—Brass plate
Base—Cast brass
Lampholder:
Lamp Watts x Size (mm) Cat. No. TE26 for 200 watt light
Voltage Lamps Length x Width x Height Cat. No. TE39 for 300 and 500 watt lights
220V 18/20 x 1 610 x 76 x 55 Made of porcelain
220V 36/40 x 1 1220 x 76 x 55 Fig. 5
Terminal block: 2-wire block
220V 18/20 x 2 610 x 130 x 55
220V 36/40 x 2 1220 x 130 x 55 Outlets: 1-gland for cable of maximum
220V 58/65 x 1 1524 x 180 x 55 15 mm in outer diameter
200 watt light—Max. 11 mm
300 and 500 watt lights—Max. 15 mm
IP 20 Non-Watertight Glow Starting
Guard: Steel
Fixture Without Reflective Cover
Finish: Melamine resin baked
Fig. 6

Description Dimensions (mm) Weight


Catalog No. Fig.
Lamp wattage A Bø C (kg)
200W EP31202-S 5
Lamp Watts x Size (mm) EP32302-F
Voltage Lamps Length x Width x Height 300W
EP32302-S 355 240 320 6 4.2
220V 18/20 x 1 685 x 95 x 122 EP32502-F
220V 36/40 x 1 1320 x 180 x 126 500W
EP32502-S
220V 18/20 x 2 685 x 160 x 122
Suffix-F shows wide beam
220V 36/40 x 2 1320 x 180 x 126 Suffix-S shows narrow beam

Watertight Halogen Mercury Vapor Flood Lighting Fixtures


Lighting Fixtures IP 44 Class of Protection

Material: Body—Brass plate


Base—Cast brass
Lampholder:
Cat. No. TE39 made of porcelain
IP 55 Terminal block: 2-wire block
Pressure die cast aluminum body and frame Outlets: 1-gland for cable of maximum
with tempered glass screen. Hammered or 11 mm in outer diameter
polished aluminum reflector to ensure wide,
Guard: Steel
medium or narrow optical distribution. Silicon
rubber gasket, R 7 s lampholder with silicon Fig. 9 Finish: Melamine resin baked
insulated wires.
Voltage Dimensions (inches) Description Dimensions (mm) Weight
v Watts Catalog No. Fig.
Height Length Depth Lamp Wattage A Bø C (kg)
220 500 9-1/2 12 7-1/2 GP42002-F
220 750 9-1/2 14 7-1/2 400 W 460 240 320 9 4.7
GP42002-S
220 1000 9-1/2 14 7-1/2
Suffix-F shows wide beam
220 1500 10-1/2 16 7-1/2 Suffix-S shows narrow beam

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0264-03 4/28/06 4:22 PM Page 1

270-06

EUROPEAN BALLASTS FOR HIGH-PRESSURE EUROPEAN RUBBER HAND LAMP


MERCURY VAPOR LAMPS UP TO 250V, FOR BULBS WITH MAX. 60W
Mains Working Explosion-Proofed and Flame-Protected
Type Voltage Frequency Current IP 56
(V) (Hz) (A)
VHQD 125 220 50 1.15 Order Weight
VHQD 250 220 50 2.13 Explanation Watt
No. ca. g
VHQD 400 220 50 3.25 protective glass resistant to sudden
VHQD 700 220 50 6.40 439 changes of temperature 60 2240
glass No. 98, socket E 27 No. 85
EUROPEAN BALLASTS FOR HIGH-PRESSURE
Total length ca 350 mm
SODIUM DISCHARGE LAMPS Recommend cable: HO7 RN-F 2 x 1,5 mm2
No. 439
Mains Working
Type Voltage Frequency Current
EUROPEAN RUBBER HAND LAMP
(V) (Hz) (A) UP TO 250V, FOR BULBS WITH MAX. 60W
VNHD 400 220 50 4.40 Splash Water-Protected
IP 56
CAPACITORS Order Total Total
Explanation
MKP 4 NF ± 10% 250 volt No. Weight Length
MKP 6 NF ± 10% 250 volt CEE-proofed Handlamp with
MKP 8 NF ± 10% 250 volt 474 porcelain socket No. 70 (E27 or B22) 700 g 270 mm
MKP 20 NF ± 10% 250 volt and protective glass No. 92
MKP 40 NF ± 10% 250 volt
Recommend cable: HO5 RN-F, HO7 RN-F
No. 474
MERCURY & SODIUM
IGNITORS STARTERS FOR FLUORESCENT LAMPS – PIN TYPE
SN 58—Sodium 400 Watt
SN 51—Mercury 250/400 Watt Dimensions (mm) Voltage Watts for
Length Diam. V Fluorescent Lamps
38 21 220 4-80
EUROPEAN FLUORESCENT HANDLAMP 38 21 220 4-22 Series
With Resistance Cable 38 21 110 FG1P
38 21 110 FG4P
38 21 110 FG7P

FLUORESCENT LAMP BALLASTERS


Dimensions: Length: 135 mm;
IP 56 421 Height: 40mm; Width: 48 mm
Voltage: 220V;
Handlamp with resistance cable, rubber sockets, screen,
automatic starter, protecting tube, complete with cable, plug Frequency: 60 cycle
and fluorescent tube. Wattage: 4W, 8W, 15W and 20W
Gr. Ø Total Length Length of Cable Complete Specify when ordering:
Order No. Volt Watt
ca. mm ca. mm ca. mtr Weight ca. g 1 x 20W; 1 X 13W, 1 X 8W
421/8 220 8 43 550 5 750

Dimensions: Length: 155 mm;


Handlamp with resistance cable, rubber sockets, screen,
Height: 48 mm; Width: 40 mm
handoperated starter, protecting tube, complete with cable,
plug and fluorescent tube. Voltage: 220V;
Frequency: 60 cycle
Gr. Ø Total Length Length of Cable Complete
Order No. Volt Watt Wattage: 20W, 30W and 40W
ca. mm ca. mm ca. mtr Weight ca. g
423/8 220 8 43 450 5 600 Specify when ordering:
451/2x8W 220 2x8W 43 550 5 800 1 x 40W, 2 x 20W, 1 x 65W

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0265-03 4/28/06 4:22 PM Page 1

271-06

EUROPEAN GLASS FUSES – 250 Volts FLUSH FITTING


5 x 20 mm L-CHARACTERISTIC CIRCUIT BREAKERS
Amperes W/Neutral
0.125 0.350 0.800 2.500 8.000 Characteristic Disconnectable
Amps. Value Model No.
0.160 0.400 1.000 3.000 10.000 Conductor
0.200 0.500 1.250 4.000 15.000 Model No.
0.250 0.600 1.600 5.000 ONE (1) POLE
0.300 0.700 2.000 6.300 6 9 15 006 L 15 006 LN
10 15 15 010 L 15 010 LN
16 22 15 016 L 15 016 LN
5 x 25mm—With or without indicator (please specify) 20 28 15 020 L 15 020 LN
25 35 15 025 L 15 025 LN
Amperes 32 42 15 032 L 15 032 LN
0.125 0.250 0.800 1.600 4.000 TWO (2) POLE
0.160 0.400 1.000 2.000 6.300 6 9 15 206 L —
0.200 0.500 1.250 2.500 10.000 10 15 15 210 L —
16 22 15 216 L —
20 28 15 220 L —
25 35 15 225 L —
STANDARD FRENCH AM CLASS FUSES – 600 Volts 32 42 15 232 L —
THREE (3) POLE
Dimensions 6 9 15 306 L 15 306 LN
Amperes (mm) d x h
10 15 15 310 L 15 310 LN
2, 4, 6, 8, 10, 12, 16, 20, 25, 32 10 x 38
16 22 15 316 L 15 316 LN
2, 4, 6, 8, 10, 12, 16, 20, 25, 32, 40 14 x 51
20 28 15 320 L 15 320 LN
10, 12, 16, 20, 25, 32, 40, 50, 63, 22 x 58 25 35 15 325 L 15 325 LN
80, 100, 125
32 42 15 332 L 15 332 LN

EUROPEAN NEOZED FUSES EUROPEAN HRC-FUSES


380 Volts Art. Nominal for L.T.HRC Art. Nominal for L.T.HRC
Low Voltage High No. Current Base/Size No. Current Base/Size
Catalog Dimensions
No.
Amperes
(mm) h x d
Rupturing Capacity 00 06 6 00 01 200 200 1

2 36 x 11 Fuses With Knife Contacts 00 10 10 00 01 224 224 1


00 16 16 00 01 250 250 1
4 36 x 11 500 Volts 00 20 20 00 0 160 160 1
D-01 6 36 x 11
00 25 25 00
10 36 x 11
00 32 32 00 02 224 224 2
16 36 x 11
00 35 35 00 02 250 250 2
20 36 x 15
00 40 40 00 02 300 300 2
25 36 x 15
00 50 50 00 02 315 315 2
D-02 35 36 x 15
00 63 63 00 02 355 355 2
50 36 x 15
00 80 80 00 02 400 400 2
63 36 x 15
00 100 100 00
D-03 80 43 x 22
00 125 125 00 03 315 315 3
100 43 x 22
01 160 160 00 03 355 355 3
01 25 S 25 1 03 400 400 3
01 32 S 32 1 03 425 425 3
JAPANESE STANDARD FUSES 01 35 S 35 1 03 500 500 3
Japanese “Cello-lite” fuses 01 40 S 40 1 03 630 630 3
01 50 S 50 1
Amps. Dimensions Without Blades
01 63 S 63 1 04 800 800 4
1 42 x 8 mm
01 80 S 80 1 04 1000 1000 4
2 42 x 8 mm
01 100 S 100 1
3 42 x 8 mm
01 125 S 125 1
5 42 x 8 mm
01 160 S 160 1
Fuses 10 42 x 8 mm
15 42 x 8 mm Große
a3 a4 b c1 e4 f
20 42 x 8 mm Size Art No. a1 a2
min. max min ±0.8
c2 d e1 e2 e3
±0.2 max
25 42 x 8 mm Taille
30 42 x 8 mm 00 00 06-00 160 78,5 ±1.5 54 -2 43,5 50,5 15 35 10-1 2 ±0.5 45 30 20 ±5 6 15
40 65 x 11 mm 1 01 25 S-01 160 S 135 ±2.5 75 -10 60 70 20 40 11-2 2.5 ±0.5 52 30 20 ±5 6 15
50 65 x 11 mm 1 01 200-01 250 135 ±2.5 75 -10 60 70 20 40 11-2 2.5 ±0.5 52 52 20 ±5 6 15
Fuse Holder 60 65 x 11 mm 2 02 40-02 400 150 ±2.5 75 -10 60 70 26 48 11-2 2.5 ±0.5 60 60 20 ±5 6 15
1-30 50 x 13 mm fuse holder 3 03 315-03 630 150 ±2.5 75 -10 60 70 32 60 11-2 2.5 ±0.5 75 75 20 ±5 6 18
40-60 75 x 18 mm fuse holder 4 04 800-04 1600 200 ±3 90 -30 60 70 49 87 11-2 2.5 ±0.5 110 105 20 ±5 6 25

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0266-03 4/28/06 4:23 PM Page 1

272-06

BRITISH HRC-FUSES
HRC-Fuse Links with offset tags HRC-Fuse Links with opposite tags
HRC-Fuse Links HRC-Fuse Links with
with offset tags Rated Equi- opposite tags
Ref. L-Nr.
Current A valents
Category of duty: Category of duty:
2
415 tested 550 AC 80 415 AC 80
4
Class: Q 1
Class: Q 1 6
A1 50 085 01 NIT
10 Rated
Ref. L-Nr. Equivalents
16 Current A
20 2
2 4
4 6 50 086 01 NS 51 014 01
6 b d 10
10 50 014 01 12,7 60 16
A2 50 001 01 TIA
16 50 086 01 1/2” 2-3/8” 20
20
25 HRC-Fuse Links with central tags
32
HRC-Fuse Links with
32
40
central tags
A3
50
50 002 01 TIS 2-hole fixing
63 Category of duty:
80 415 tested 550 AC 80
A4 50 003 01 TCP
100 Class of fusing factor: Q 1
125
Rated
160 50 004 01 TFP Ref. L-Nr. Equiv.
Current A
200
2
4
b g h k e 6
50 012 01 13,5 44 5 14 11 10
50 085 01 17/32” 1-3/4” 3/16” 9/16” 7/16” 16
22 23,8 8,7 B1 20 50 007 01 TBC
50 001 01
7/8” 73 5,5 15/46” 11/32” 25
25 2-7/8” 7/32” 26,5 12 32
50 002 01
1” 1-1/16” 15/32” 40
36 8,7 38 b e 50
50 003 01 L-Nr. Ref.
1-13/32” 94 11/32” 1-1/2” 18 mm in mm in 63
41 3-11/16” 7,2 43 23/32” 50 007 01 B1 25 1 14 9/16 80
50 004 01 B1 50 008 01 TC
1-5/8” 9/32” 1-11/16” 50 008 01 B1 37 1-15/32 18 3/4 100

HRC-Fuse Holder front connected 500/600V


For Fuse Links
A Suitable A Suitable
with offset tags Ref. L-Nr. Equivalents Ref. L-Nr. Equivalents
max HRC-Fuse max HRC-Fuse
housing: pressed material 50 012 01 A3 63 51 002 01 RS 63 H 50 002 01
A1 20 51 012 01 RS 20 H
contact: brass 50 085 01 A4 100 51 003 01 RS 100 H 50 003 01
A2 32 51 001 01 RS 32 H 50 001 01

Panel drilling dimensions L-Nr. Ref. Amp. a b c d f g r s t


mm 27 80 48 3,5 15 14 0 0 5,5
51 012 01 A1 20
inch 1-1/16 3-3/16 1-7/8 9/64 5/8 9/16 * * 7/32
mm 33 102 65 7,7 16 14 6,35 12,7 5,5
51 001 01 A2 32
inch 1-1/4 4 2-9/16 5/16 5/8 9/16 1/4 1/2 7/32
mm 36 112 71 10,5 17,5 14 6,35 12,7 5,5
51 002 01 A3 63
inch 1-3/8 4-7/16 2-25/32 13/32 11/16 9/16 1/4 1/2 7/32
mm 52 144 90 13,5 22 14 22 19 6,5
51 003 01 A4 100
inch 2-1/16 5-11/16 3-9/16 17/32 7/8 9/16 7/8 3/4 1/4
*1 Loch Mittig/1 Central Hole

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0267-03 4/28/06 4:24 PM Page 267

273-06

SM/DANLAMP AS

EUROPEAN NAVIGATION LAMPS


Effect Rating
Rated Voltage Cd (1) Min. Amp Cap Fig.
Watt Max.

12 12 18 1,5 BA15 and BAY15 1

24 12 18 0,75 BA15 and BAY15 1

12* 30 25 2,08 BA15 and BAY15 1

24* 30 25 1,55 BA15 and BAY15 1

12* 18 24 2,0 BA15 and BAY15 1

24* 18 24 1,0 BA15 and BAY15 1

12* 18 24 2,0 B22 2

24* 18 24 1,0 B22 2


Fig. 1
110* 18 24 0,22 BA15 1

220* 18 24 0,11 BA15 1

12 (2) 24 25 2,08 BA15 and BAY15 1

24 (2) 24 25 1,05 BA15 and BAY15 1

32 (2) 24 30 0,95 BA15 and BAY15 1

120 (2) 24 38 0,25 BA15 and BAY15 1

24* 50 50 2,08 B22 5

24* 35 55 2,3 E27 and B22 3

110* 35 55 0,5 B22 4

220* 35 55 0,25 B22 4

110* 65 80 0,73 B22 6

220* 65 85 0,38 B22 6

* (NK: Nordisk kontrol) which means that the lamps are approved in Scandinavia
(1) Minimum horizontal luminous intensity for rated voltage.
Fig. 2 (2) Production
control on all types of SM navigation lamps performed by
Danish Government Ships Inspection Service (DGSIS).

Fig. 3 Fig. 4 Fig. 5 Fig. 6

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION
SM/DAN LAMP A/S manufactures a complete line of
Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
navigation and standard lamps. For any items not shown, Houston Office: 7140 Navigation • Houston, TX 77011
please contact Technico Marine Corp. Tel: (713) 928-6288 • Fax: (713) 928-6289
0268-03 4/28/06 4:25 PM Page 268

274-06

SM/DANLAMP AS
EUROPEAN LOW VOLTAGE BULBS
6 VOLT 12 VOLT
Conical Bulb, clear, 35 mm dia. Tubular Bulb, clear, 25 mm dia.
EUROPEAN Base
Watt Base
ROUGH SERVICE E 27 B 22 E 14 B 15 Watt
E 27 B 22 E 14 B 15
15 60 — 62 60
BULBS 25 60 — 62 —
25 — — 85 —

Standard Bulbs, 220/230 Volt, frosted. 40 — — 62 60 Conical Bulb, clear, 35 mm dia.


Base
Watt Dia.
Base i Lumen 12 VOLT Watt
E 27 B 22 E 14 B 15
E-27 B22 v/225 volt Standard Bulb, frosted, 60 mm dia.
25 60 105 104 200 15 60 60 62 60
Base 25 60 60 62 60
40 60 105 104 335 Watt
E 27 B 22 E 14 B 15 40 60 60 62 60
60 60 105 104 525 15 105 — — —
100 65 120 119 1030 25 105 104 — — 24 VOLT
200 80 170 165 2840 40 105 104 — — Standard Bulb, frosted, 60 mm dia.
60 105 104 — — Base
Watt
E 27 B 22 E 14 B 15
15 105 104 — —
25 105 104 — —
40 105 104 — —
EUROPEAN STANDARD BULBS 60 105 104 — —
120 Volt, frosted. 220/230 Volt – Crown shaped bulbs. 75 105 104 — —
Dimensions Colors: 15 watt in red & yellow, 100 105 104 — —
Lightpower
Watt
Diam.
Overall Length 25 watt in green & blue. Conical Bulb, clear, 35 mm dia.
in Lumens
E 27 B 22 E 40
15 60 105 104 — 135
Dimensions Base
Watt Overall Length Watt
25 60 105 104 — 267 E 27 B 22 E 14 B 15
Diam.
40 60 105 104 — 512 E 27 B 22 E 14 15 60 60 62 60
60 60 105 104 — 852 15 45 72 — 76 25 60 60 62 60
75 60 105 104 — 1132 25 45 72 — 76 40 60 60 62 60
100 60 105 104 — 1630
150 65 120 129 — 2520 Tubular Bulb, clear, 16 mm dia.
200 80 170 165 — 3560
FLAME SHAPED BULBS Base
120 Volt, frosted. Watt
300 90 — — 189 5200 E 27 B 22 E 14 B 15
500 110 — — 239 9700 Dimensions 15 — — 85 84
Watt Frosted
300 watt or 500 watt can be delivered in clear finish. Diam. E 14 25 — — 85 84
15  35 97
25  35 97
32 VOLT
Standard Bulb, frosted, 60 mm dia.
220/230 Volt. Specify frosted or clear. 40  35 97
Base
Dimensions 220 Volt. Specify frosted or clear. Watt
Lumens at
E 27 B 22 E 14 B 15
Watt Frosted Clear Diam.
225 Volts Watt Frosted Clear Dimensions 15 105 104 — —
E 27 B 22 E 27 E 40 Diam. E 14 25 105 104 — —
15 105 104 105 — 60 120 15   35 97 40 105 104 — —
25 105 104 105 — 60 238
25   35 97 60 105 104 — —
40 105 104 105 — 60 432
40  35 97 75 105 104 — —
60 105 104 105 — 60 720
75 105 104 105 — 60 967 100 105 — — —
100 105 104 105 — 60 1390 COLORED BULBS
150 120 119 120 — 65 2210 220/230 Volt – Standard shape.
48 VOLT
200 170 165 — — 80 3100 Clear, 28 mm dia.
300 183 — — 189 90 5040
Colors: 25 watt in red & yellow,
Base
500 — — — 233 110 8550 40 watt in green & blue. Watt
E 27 B 22 E 14 B 15
Dimensions 25 — — 62 —
Watt Overall Length 40 105 — — —
Diam.
E 27 B 22 E 14 60 105 104 — —
230/240 Volt. Specify frosted or clear. 25 60 105 — —
Dimensions
Lumens at 40 60 105 — — 65 VOLT
Watt Frosted Clear Diam.
235 Volts
Standard Bulb, frosted, 60 mm dia.
E 27 B 22 E 27 E 40 Base
15 105 — — — 60 118 CROWN SHAPED BULBS Watt
E 27 B 22 E 14 B 15
25 105 104 — — 60 235 Specify 120 or 220 Volt, frosted. 15 105 — — —
40 105 104 — — 60 428
Watt Diam. Dimensions 25 105 104 — —
60 105 104 — — 60 714
75 105 104 — — 60 960 E 27 B 22 E 14 40 105 104 — —
100 105 104 105 — 60 1330 15 45 72 70 76 60 105 104 — —
150 120 — 120 — 65 2205 25 45 72 70 76 75 105 — — —
200 170 165 — — 80 3105 40 45 72 70 76 100 105 — — —

USA Stocking Distributor: Technico Marine Corp.


SM/Danlamp as 141 Beard St., Bldg. 15, Brooklyn, NY 11231
NYGADE 12A, 6200 AABENRAA – DENMARK
Tel: (718) 855-3700 • Fax: (718) 855-3754
Phone: + 45 74 62 22 66 Web Site: www.danlamp.dk E-mail: tmcny@aol.com • www.technicomarine.com
Fax: + 45 74 62 80 69 E-mail: sales@danlamp.dk Telex: 178945 TECGD UT
0269-03 4/28/06 4:25 PM Page 1

275-06

SM/DANLAMP AS
EUROPEAN INDICATOR LAMPS TUNGSTEN HALOGEN LAMPS
Type: TKL Type: KRL
Dimension: Dimension:
7 x 25 mm 10 x 28 mm
T2 T 3-1/4
Standard-Type Dimensions (mm)
Type Voltage Watts Base
Length Diameter
K1 118 12 110/120 500 R7s
K1 118 12 220/230 500 R7s
Volt A = Ampere, W = Watt K3 189 12 220/230 750 R7s
Volt Ampere K4 189 12 110/120 1000 R7s
4 A 0,05; 0,25; 0,3; 0,4
6 0,1 K4 189 12 220/230 1000 R7s
A 0,02; 0,03
12 0,05
6 A 0,05; 0,08; 0,1; 0,18 K5 254 12 220/230 1500 R7s
24 0,025
28 0,04
W 1; 1,2; 1,5; 2; 3; 4; 5 K6 324 12 220/230 2000 Fa4s
A 0,02 ; 0,03
30 0,03
12 A 0,05; 0,08; 0,1; 0,12
36 0,05
W 1; 1,2; 1,5; 2; 3; 4; 5
42 0,04
A 0,02 ; 0,03
48 0,025
24 A 0,04; 0,05; 0,08; 0,1; 0,2
60 0,02; 0,025
W 1; 1,2; 1,5; 2; 3; 4; 5
0,04 Dimensions (mm)
A 0,02; 0,03 Type Voltage Watts Base
70 0,02 Length Diameter
28 A 0,04; 0,08; 0,1; 0,17
0,04 IODE 95 15.5 220/230 250 E-27
W 1; 1,2; 1,5; 2; 3; 4; 5
80 0,02 IODE 240 30 220/230 500 E-40
A 0,02; 0,03
30 A 0,04; 0,05; 0,08 IODE 260 30 220/230 1000 E-40
W 1,2; 1,5; 2; 3; 4; 5
A 0,02; 0,03
36 A 0,04; 0,05 EUROPEAN HIGH-PRESSURE SODIUM LAMP
W 1,5; 2; 3; 4; 5
Type: RL A 0,02; 0,03 (Clear, Ignitor Required)
Dimension: 42 A 0,04; 0,05
16 x 50 mm W 1,5; 2; 3; 4; 5
T5 A 0,02 NAV TYPE
48 A 0,03; 0,04; 0,05
W 1,5; 2; 3; 4; 5
A 0,02 – W 1,2
60 A 0,03; 0,04; 0,05 Luminous Diameter Overall
W 2; 3; 4; 5 Type Flux (Im) (mm) Length (mm) Base
Volt A = Ampere, W = Watt A 0,02 NAV-T400W 48000 46 285 E40
A 70
0,05; 0,08; 0,2 A 0,04
12 W 2; 3; 4; 5; 7 A 0,02
80
W 10; 15 A 0,04
A 0,05; 0,08; 0,2 110/
EUROPEAN HIGH-PRESSURE MERCURY LAMPS
130 A 0,02
24 W 2; 3; 4; 5; 7; 10
W 15
A 0.08 NEON LAMPS Volt
Max.
mA
30 W 2; 3; 4; 5; 7; 10
W 15 Type: SGL 110 2,0
(Self Ballast)
36 W 3; 4; 5; 7; 10 Dimension: 220* 3,5 HWL TYPE
W 15 16 x 54 mm 380* 2,0
48 W 3; 4; 5; 7; 10 *10000 h
W 15
60 W 3; 4; 5; 7; 10 Lamp Bulb Bulb Overall Luminous
Type
W 15 (W) Base Dia. Length Flux (Im)
70 W 5; 7; 10 160W 225V 160 E-27 75 mm 177 mm 3,100
80 W 5; 7; 10 250W 225V 250 E-40 90 mm 226 mm 5,600
500W 225V 500 E-40 120 mm 275 mm 14,000
EUROPEAN CURRENT
INDICATOR LAMPS
Amp Range
1 VOLT (External Ballast)
0,06 – 0,10 Diameter: 28 mm Type: ZGL
HQL TYPE
0,09 – 0,15 Length: 58 mm Dimension:
0,13 – 0,22
0,18 – 0,31
10 x 28 mm
Lamp Bulb Bulb Overall Luminous
0,28 – 0,45 Type
(W) Base Dia. Length Flux (Im)
0,40 – 0,65 Max.
Volt 125W 125 E-27 75 mm 170 mm 6,300
0,58 – 0,95 mA
0,85 – 1,40 220* 2,0 250W 250 E-40 90 mm 226 mm 13,500
1,25 – 2,00 380* 0,8 400W 400 E-40 120 mm 290 mm 23,000
1,80 – 3,00 B 22 E 27 *10000 h 700W 700 E-40 140 mm 330 mm 40,000

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0270-03 4/28/06 4:26 PM Page 270

276-06

Navigation Lamps – Clear


German Standard Japanese Standard

Fig. 1 Fig. 2

Voltage Intensity Power d (max) I (max) a


Base Figure
V min. cd W mm mm mm
24 50 40 39 108 45 ± 1.5 P 28 S 1
110 50 60 39 108 45 ± 2 P 28 S 2
Fig. 3 Fig. 4
220 50 65 39 108 45 ± 2 P 28 S 2
110 50 60 60 110 75 ± 3 E 26 3
Burning Position: s 30
220 50 60 60 110 75 ± 3 E 26 3
110 — 60 38 110 — E 26 4 All lamps correspond to DIN 49841 and correspond to
220 — 60 38 110 — E 26 4 license and improvement conditions for position lanterns.

Telephone Slide Base Lamps

(Specify when ordering: Type: T4.6, T5.5K or T5.5 • Voltage: 6v, 12v, 24v, 30v, 48v or 60v • Amps: 20mA, 40mA, or 50mA)

Japanese Rare Earth Fluorescent Mercury Lamps (External Ballast)


Reflector Lamps
HR F-WX Type – Wide Beam
HF-X Type HRN Type – Narrow Beam

Lamp Overall Rated Luminous Lamp Overall Rated Luminous


Type Output Bulb Dia. Length Base Voltage Flux Type Output Bulb Dia. Length Base Voltage Flux
(W) Type (mm) (mm) (V) (lumen) (W) Type (mm) (mm) (V) (lumen)
HF 80X 80 B 70 70 174 ± 5 E26 200 3,400 HRF 300WX 300 R190 190 315 ± 5 E39 200 10,200
HF 125X 125 B 75 75 175 ± 5 E26 200 5,300 HRF 400WX 400 R190 190 315 ± 5 E39 200 15,600
HF 300X 300 B 120 120 285 ± 5 E39 200 15,800 HRF 700WX 700 R250 250 415 ± 5 E39 200 29,000
HF 400X 400 B 120 120 285 ± 5 E39 200 22,000 HRF 1000WX 1000 R280 280 415 ± 5 E39 200 38,000
HF 700X 700 BT 150 150 375 ± 5 E39 200 41,000 HR 700N 700 R280 280 410 ± 5 E39 200 29,000
HR 400N 400 R280 280 410 ± 5 E39 200 29,000

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0271-03 4/28/06 4:27 PM Page 1

277-06

EUROPEAN LAMPS EUROPEAN LAMP BASES


European Reflector Outdoor Flood (Shown Actual Size)
and Parabol R 50 Lamps
Inside Frosted
Angle of Dimensions Built in
Power
Emission Diam. Length Length Base Voltage
W
(approx.) mm mm mm
25 35° 50 84 72 E14 220/230
40 35° 50 84 72 E14 220/230

Reflector Lamps Parabol R63


Inside Frosted
Dimensions
BA 9s B 15 BAY 15d
Angle of Built in
Power
Emission Diam. Length Length Base Voltage
W
(approx.) mm mm mm
40 35° 63 103 85 E27 220/230
60 35° 63 103 85 E27 220/230

E10
Wide Beam Floodlight—
Cool with Dichronic Reflector
The dichronic reflector allows 75% of the heat to pass
through the back of the lamp without loss of light.
Wide Beam Flood—FL-C
Sealed beam PAR 38, internal reflector, coarsely granulated
Angle of Dimensions Built in
Power
Emission Diam. Length Length Base Voltage BA 20s E 14
W B 22
(approx.) mm mm mm
150 40° 122 133 123 E27 220/230

Floodlight/Spotlight Par 56
The light beams are not club-shaped (circular cross-
section, rotation-symmetrical) but fan-shaped (elliptical
cross-section). The two beam angles shown refer to
the two planes in a perpendicular position to each
other with the largest and the smallest beam angle.
Sealed beam with cap GX16d (flat pins).
Narrow Spotlight—NSP E 27
Medium Floodlight—MFL, Wide Floodlight—WFL
Angle of Dimensions Built in
Power
Emission Diam. Length Length Base Voltage E 40
W
(approx.) mm mm mm
300 9°/15° 179 127 83 GX16d 220/230
300 11°/25° 179 127 83 GX16d 220/230
300 16°/40° 179 127 83 GX16d 220/230 Japanese Reflector
Outdoor Flood (Flat)
Infrared Lamps Light Bulbs
Dimensions
Power Execution Life Dimensions (mm)
d (max) l (max) Base Model No. Socket
W Top (hours)
mm mm Diam. Length
150 Red 125 185 5000 E27 RF 200 WH E-26 130 154
250 Clear 125 185 5000 E27 RF 300 WH E-39 140 220
250 Red 125 185 5000 E27 RF 500 WH E-39 180 250

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0272-03 4/28/06 4:28 PM Page 1

278-06

ENERGY-SAVING SINGLE-BASED FLUORESCENT LAMPS


Lamp
Model No. Watt Lumens Color Socket Dia. Overall
(mm) Length (mm)
S Single-Based Fluorescent Lamps (2 pins) Model S

24105-21 5 250 Cool White G 23 27 108


24105-41 5 250 Warm White G 23 27 108 5W = 25W
24107-21 7 400 Cool White G 23 27 138
7W = 40W
9W = 60W
24107-41 7 400 Warm White G 23 27 138
11W = 75W
24109-21 9 600 Cool White G 23 27 168
24109-41 9 600 Warm White G 23 27 168
Model D
24111-21 11 900 Cool White G 23 27 238
24111-41 11 900 Warm White G 23 27 238
D Single-Based Fluorescent Lamps (2 pins)
24210-21 10 600 Cool White G 24d-1 27 118 10W = 60W
13W = 75W
24210-41 10 600 Warm White G 24d-1 27 118
18W = 100W
24213-21 13 900 Cool White G 24d-1 27 153
26W = 2 x 75W
24213-41 13 900 Warm White G 24d-1 27 153 Model EL

24214-21 18 1200 Cool White G 24d-2 27 173


24214-41 18 1200 Warm White G 24d-2 27 173
24215-21 26 1800 Cool White G 24d-1 27 193
24215-41 26 1800 Warm White G 24d-3 27 193
7W = 40W
EL Electronic Fluorescent Lamps (Screwed Base) 11W = 60W
24100 7 400 Warm White E 27 58 145 15W = 75W
24101 11 600 Warm White E 27 58 165 20W = 100W
24102 15 900 Warm White E 27 58 175
24103 20 1200 Warm White E 27 58 207

EUROPEAN FLUORESCENT LAMPS


Model Dia. Length (mm)
JAPANESE FLUORESCENT LAMPS L-8W/33 15 287
Bi-Pin Tubes L-13W/33 15 430
L-15W/33 26 436
Model Dia. Length (mm)
L- 18W/33 26 590
FL-8 15 287
L-18W/83 26 590
FL-10 25 330
L-20W/33 38 590
FL-15 25 436
L-36W/33 26 1200
FL-20 32 580
L-36W/83 26 1200
FL-40 32 1198
L-58W/33 26 1520
L-80W/33 38 1520
L-115W/33 38 1198

GERMICIDAL TUBE LAMPS


Model Dia. Length (mm)
EUROPEAN EXPLOSIONPROOF
GL-8 15.5 287 FLUORESCENT TUBE LAMPS
GL-10 25 330 Model Dia. Length (mm)
GL-15 25.5 436 TLX 20/33 38 574
GL-30 25 893 TLX 40/33 38 1184

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
0273-04 4/28/06 4:28 PM Page 1

279-06

EUROPEAN AND JAPANESE


MINIATURE LAMP BULBS

CLEAR TUBULAR LAMPS

Medium Edison Screw Base E27 Small Edison Screw Base E14
Catalog No. Volts Watts Dimen. (mm)* Catalog No. Volts Watts Dimen. (mm)*
2821 110 15 26 x 62 2813 110 15 26 x 62
2817 110 15 26 x 80 2809 110 15 26 x 80
2823 110 25 26 x 62 2815 110 25 26 x 62
2819 110 25 26 x 80 2811 110 25 26 x 80
2871 110 40 27 x 70 2814 220 15 26 x 62
2822 220 15 26 x 62 2810 220 15 26 x 80
2818 220 15 26 x 80 2816 220 25 26 x 62
2824 220 25 26 x 62 2812 220 25 26 x 80
2820 220 25 26 x 80 2872E 220 40 25 x 68
2872 220 40 27 x 70 *Dimensions are approximate and may vary slightly
*Dimensions are approximate and may vary slightly

Double Contact Bayonet Base B22 Small Double Contact Bayonet Base B15
Catalog No. Volts Watts Dimen. (mm)* Catalog No. Volts Watts Dimen. (mm)*
2805 110 15 26 x 62 2829 110 15 26 x 62
2801 110 15 26 x 80 2825 110 15 26 x 80
2807 110 25 26 x 62 2831 110 25 26 x 62
2803 110 25 26 x 80 2827 110 25 26 x 80
2873 110 40 27 x 70 2873B 110 40 26 x 70
2806 220 15 26 x 62 2830 220 15 26 x 62
2802 220 15 26 x 80 2826 220 15 26 x 80
2808 220 25 26 x 62 2832 220 25 26 x 62
2804 220 25 26 x 80 2828 220 25 26 x 80
2874 220 40 27 x 70 2874B 220 40 25 x 70
*Dimensions are approximate and may vary slightly *Dimensions are approximate and may vary slightly

NAVIGATION LAMPS

Medium Edison Screw Base E27 Double Contact Bayonet Base B22
Catalog No. Volts Cd Catalog No. Volts Cd
2867 110 26 2869 110 26
2867A 110 65 2869A 110 65
2868 220 26 2870 220 26
2868A 220 65 2870B 220 50
2870A 220 65

290 Murray Street 3726 Parker Street


Cambridge Montreal, QC H3C 2E2 Burnaby, BC V5C 3B1
Canada Canada
Agencies Telephone: (514) 875-5700 Telephone: (604) 205-0057
Limited Fax: (514) 875 8638 Fax: (604) 205-0027
Toll Free: 1-877-875-0057
Please see our ad in the Advertising Section E-mail: info@cambridgeagencies.com
0274-03 4/28/06 4:30 PM Page 274

280-06

EUROPEAN AND JAPANESE SPECIAL PURPOSE LAMPS


24 Volt Indicator Lamps – Clear Flashlight Lamps

Fig. 1 Fig. 2 Fig. 4 Fig. 5

Cat. Fig. Glass Overall


Watts Volts Base
No. No. Dia. Length 203130 202950
104824 1 5 24 French Candelabra 14 mm 30 mm 203136 202956 106746 103510
102602 2 15 24 (Edison Mignon E14) 28 mm 66 mm
102642 4 15 24 Standard D.C. Bayonet (B22) 30 mm 61 mm Cat. No. Lamp No. Base Volts Amps Description
102622 5 15 24 Min. D.C. Bayonet (B15) 28 mm 64 mm 203130 PR2 Miniature Flanged 2.38 .50A 2 Unit Cells
203136 PR3 Miniature Flanged 3.57 .50A 3 Unit Cells
Indicator Lamps – Clear 202950 14 Miniature Screw 2.47 .30A 2 Unit Cells
202956 13 Miniature Screw 3.70 .30A 3 Unit Cells

Sperry Repeater Lamp


Lamp Amps or Overall
Cat. No. Bulb Base Volts
No. Watts Length
Fig. 1 Fig. 2 Fig. 3 Fig. 4
106746 809M G-8 Miniature Screw 70 8 Watts 1-1⁄8”
Cat. Fig. Glass Overall
Watts Volts Base
No. No. Dia. Length
104904 1 10/6 140/110 16 mm 64 mm Two Filament Marine Lamps
104914 1 10 220 16 mm 52 mm Max. Overall
102610 2 15 120 French Candelabra 22 mm 60 mm Cat. No. Lamp No. Watts Base Volts
Length (in.)
102616 2 15 220 (Edison Mignon E14) 22 mm 66 mm
103510 50/50-P25/28 50-50 3c Mogul 120 5-1/16”
102612 3 25 120 25 mm 58 mm
102618 3 25 220 25 mm 66 mm
104576 4 10 110 16 mm 54 mm Linestra Lamps
Min. D.C. Bayonet
104588 4 10 220 16 mm 52 mm

Indicator Lamps – Clear Cat. No. Watts Volts Base


Glass Overall
Description
Dia. Length

108940 35 120 1-3⁄16” 11-13⁄16” Wh. Opal


108946 35 230 2 Peg Type Caps 1-3⁄16” 11-13⁄16” Wh. Opal
Fig. 1 Fig. 2
108942 60 120 (S14s) 1-3⁄16” 19-3⁄4” Wh. Opal
Cat. Fig. Glass Overall
Watts Volts Base 108948 60 230 1-3⁄16” 19-3⁄4” Wh. Opal
No. No. Dia. Length
104718 1 2 24 13 mm 34 mm
104736 1 6 120 Candelabra (E12) 16 mm 48 mm Special Indicator Lamps – Clear
104750 1 6/10 230/260 16 mm 45 mm
104516 2 6 24 14 mm 32 mm
104572 2 6 120 Min. D.C. Bay. (B15) 16 mm 45 mm
104584 2 10 230 16 mm 45 mm

Indicator lamps with MT base


Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
Cat. No. Volts mA Diam. Length Cat. Fig. Glass Overall
Watts Volts Base
No. No. Dia. Length
104282 28 40 6 18
106758 1 3 3 Min. S.C. Bayonet 18 mm 35 mm
103204 2 5 6 18 mm 34 mm
Min. D.C. Bayonet
103214 2 5 12 18 mm 34 mm
Indicator lamps “H” shape for Terasaki equipment
104710 3 2 18 Min. Screw E12 13 mm 34 mm
Cat. No. Volts Type Diam. Length 104374 4 2 24 Min. S.C. Bayonet B10s 9 mm 28 mm
105193 5 1.2 28 6 mm 15 mm
S6s
104292 28 OL4089 6 20 105144 5 1.2 6 6 mm 15 mm

Kerger Marine Electric, Inc. Head Office: Kerger & Co. B.V.
4350 South Wayside Drive, Suite 104 We stock a complete line of European & Japanese Fokkerstraat 515
Houston, TX 77087 marine electrical spare parts 3125 BD Schiedam
Phone: (713) 643-3326 The Netherlands
Fax: (713) 643-6683 Visit our Website for more information: www.kerger.com Phone: 31-104374500
(800) 328-3670 Fax: 31-104376825
E-mail: saleshouston@kerger.com ALL MAIN EUROPEAN PARTS AVAILABLE IN SHORT TIME E-mail: sales@kerger.nl
0275-03 4/29/06 8:10 PM Page 275

281-06

EUROPEAN ENERGY-SAVING LAMPS


FL Light Color Characteristics Energy Savers with G24 Base, PLC Type
Color Color Temp. K Description No.
Cat. No. Watts Base Diam. Length Color Pins
827 2650 extra-warm white
122136 10 G24d-1 28 118 829 2
830 3000 warm white 122138 10 G24d-1 28 118 840 2
840 4000 extra white 122140 13 G24d-1 28 140 827 2
122143 13 G24d-1 28 140 830 2
122144 13 G24d-1 28 140 840 2
Energy Savers, 230-240V AC, PLE Type 122141 18 G24d-2 28 152 827 2
122146 18 G24d-2 28 152 830 2
Cat. No. Watts Base Diam. Length Color
122147 18 G24d-2 28 152 840 2
122090 11 B22 39 132 827 122149 26 G24d-3 28 173 827 2
122102 5 E14 39 114 827 122150 26 G24d-3 28 173 830 2
122151 26 G24d-3 28 173 840 2
122104 9 E14 39 114 827
122226 13 G24q-1 28 130 830 4
122106 11 E14 39 145 827 122228 18 G24q-2 28 144 827 4
122110 5 E27 39 111 827 122229 18 G24q-2 28 144 830 4
122111 7 E27 45 129 827 122231 18 G24q-2 28 144 840 4
122112 9 E27 39 111 827
122118 11 E27 39 140 827
Energy Savers with 2G11 Base,
122124 15 E27 39 172 827 4 Pins, PLL Type
Cat. No. Watts Diam. Length Color
122178 18 38 225 827
Energy Savers, PLS Type 122179 18 38 225 830
122180 18 38 225 840
No.
Cat. No. Watts Base Diam. Length Color Pins 122184 36 38 415 827
122185 36 38 415 830
122156 5 G23 27 108 827 2 122186 36 38 415 840
122158 7 G23 27 138 827 2 122190 55 38 535 840
122160 7 G23 27 138 840 2
122164 9 G23 27 168 827 2 Energy Savers with E27 Base (AC only)
122166 9 G23 27 168 840 2
Cat. No. Volts Watts Diam. Length Color
122168 11 G23 27 238 840 2
122194 127 15 54 124 827
122170 11 G23 27 238 827 2 122200 220 15 54 124 827
122240 11 2G7 28/13 215 827 4 122206 220 20 54 143 827
122242 11 2G7 28/13 215 840 4 122212 220 23 54 158 827

“ALDIS” LONG-RANGE DAYLIGHT SIGNALING LAMP


(Complies with SOLAS specifications for Signaling Lamps.)

Fig. No. Cat. No. Description


“Aldis” Long-range Signaling Lamp Mark X Complete with Telescope; 12 Volt,
1 202618 60 Watt “Aldis” Bulb mounted in Signaling Lamp; 12 ft. Rubber Cable and
Fig. 1 Clear Front Lens; Wooden Carrying Case
482650 “Aldis” Transformer. Input 110 Volt A.C. 50/60 Cycle. Output 60 Watt, 12 Volt
Fig. 3 2
482652 “Aldis” Transformer. Input 220 Volt A.C. 50/60 Cycle. Output 60 Watt, 12 Volt
3 202640 “Aldis” 12 Volt Storage Battery Complete with Wooden Carrying Case
4 108006 Top mirror “Aldis” lamp, 12V, 60W, P15D base, 40mm dia. x 63mm high
108008 Top mirror “Aldis” lamp, 24V, 60W, P15D base, 40mm dia. x 63mm high

Fig. 4 5 108680 SPS-10A for Japanese “Aldis”, 24V, 60W, GX6,35 base, 18mm dia. x 42mm high
Fig. 2 Fig. 5

Kerger Marine Electric, Inc. Head Office: Kerger & Co. B.V.
4350 South Wayside Drive, Suite 104 We stock a complete line of European & Japanese Fokkerstraat 515
Houston, TX 77087 marine electrical spare parts 3125 BD Schiedam
Phone: (713) 643-3326 The Netherlands
Fax: (713) 643-6683 Visit our Website for more information: www.kerger.com Phone: 31-104374500
(800) 328-3670 Fax: 31-104376825
E-mail: saleshouston@kerger.com SOLE AGENTS FOR “MERKUR” NAVIGATION LAMPS E-mail: sales@kerger.nl
0276-04 4/29/06 8:11 PM Page 1

282-06

EUROPEAN AND JAPANESE GLASS GLOBES

European Globes with Screw Rings

Outside Dia.
Catalog No. Overall Height Type of Glass
of Ring
22144 116 mm 100 mm Clear
22157 116 mm 100 mm PVC
22144 22170 22170 122 mm 100 mm Opal
22157

European Glass Globes – White Opal


40315
A B C
Catalog Inside Dia. Overall Height 40318
No. of Opening Dia.
40315 275 mm 130 mm 130 mm
40318 285 mm 145 mm 145 mm

European Glass Globes – Clear

Catalog A B
No. Overall Height Dia. Across Lip
22560 22560 5-1/2" (140 mm) 3-7/8" (98 mm)
22287
22287 6-1/2" (165 mm) 3-1/2" (89 mm)
22209
22209 4-1/2" (115 mm) 3-11/16" (94 mm)
22180
03183 22180 6-5/16" (160 mm) 5-1/8" (130 mm)
22183 5-3/4" (145 mm) 5-15/16" (150 mm)
03183 1-1/2" (38 mm) 7-7/8" (200 mm)

Japanese Glass Globes – Clear


A B C
Catalog No. Dia. Across Lip Overall Height Dia. of Glass Body 22495
22495 2-3/8" (60 mm) 2-15/16" (75 mm) 2-1/4" (57 mm) 22501
22501 3-1/8" (80 mm) 3-1/2" (90 mm) 3-1/8" (80 mm) 22508
22508 3-5/16" (84 mm) 5-15/16" (150 mm) 3-3/8" (85 mm) 22510
22510 3-5/16" (84 mm) 6-3/4" (170 mm) 3-3/8" (85 mm) 22612

22612 4-7/8" (123 mm) 6-7/8" (175 mm) 4-3/4" (120 mm)
03190
03190 7-1/2" (190 mm) 2-3/8" (60 mm) 6-7/8" (175 mm)

290 Murray Street 3726 Parker Street


Cambridge Montreal, QC H3C 2E2 Burnaby, BC V5C 3B1
Canada Canada
Agencies Telephone: (514) 875-5700 Telephone: (604) 205-0057
Limited Fax: (514) 875 8638 Fax: (604) 205-0027
Toll Free: 1-877-875-0057
Please see our ad in the Advertising Section E-mail: info@cambridgeagencies.com
0277-03 5/4/06 8:02 PM Page 277

283-06

EUROPEAN FUSE EQUIPMENT


Cartridge Fuses
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Pencil Type, Cartridge Fuses
Cat. No. Type Amp.

1132 2
1133 4
1134 6
ND 11
1135 10
(500 volts)
1136 16
1137 20
1138 25
Length 1-9/32” Length 2” Length 2” Length 2-9/16” Length 2-5/8”
Dia. 5/8” Dia. 7/8” Dia. 1-1/16” Dia. 1-5/16” Dia. 1-13/16”

Bottom Screws
Cat. No. Type Amp. Color
FLINK TRAGA 1108 2 Rose
(QUICK ACTION) (SLOW ACTION)
1109 4 Brown
Cat. No. Type Amp. Cat. No. Type Amp. 1110 6 Green
1055 2 — — — 1111 S 11 10 Red
1056 4 — — — 1112 16 Gray
D1 1113 20 Blue
Figure 1 1057 6 — — —
(250 volts) 1114 25 Yellow
1058 10 — — —
1059 15 — — — 1116 35 Black
1118 S 111 50 White
1062 2 1062T 2
1119 63 Gold
1063 4 1063T 4
1064 6 1064T 6
D 11 D 11
Figure 2 1065 10 1065T 10
(500 volts) (500 volts)
1066 16 1066T 16
1067 20 1067T 20 Bottom Screws
1068 25 1068T 25 Type Amp.
Cat. No.
1070 35 1070T 35
D 111 D 111 1125 80
Figure 3 1072 50 1072T 50 S 1V F
(500 volts) (500 volts) 1126 100
1073 63 1073T 63
1127 125
1074 D 1V 80 1074T D 1V 80
Figure 4 1128 SVF 160
1075 (500 volts) 100 1075T (500 volts) 100 1129 200
— — — 1081T 125
DVH
Figure 5 — — — 1082T 160
(500 volts)
— — — 1083T 200

Bottom Screw Wrench Fuse Caps


Cat. No. Type Volts Amp.

1002 K 1/15 250 15


1005 K 11 500 25
1006 K 111 500 63

1007 K 1V H 500 100


Cat. No. 1390: For fastening and unfastening S11 (2 – 25 Amps) 1008 KVH 500 200
and S 111 (35 – 63 Amps) bottom screws
Fine Thread

Distributors PORT MARINE OF CALIFORNIA Distributors for


for 1982 Gladwick St.
Rancho Dominguez, CA 90220
Tel: 310-631-5657 • Fax: 310-631-5759
E-mail: portmarine@earthlink.net
Complete Line of European & American Electrical Equipment
0278-04 4/29/06 8:22 PM Page 1

284-06

BAKELITE TERMINAL STRIP PORCELAIN CONNECTORS

12 pole 4720 4721 4722

Catalog No. Dimensions (mm) Wire Size (mm2) Catalog No. Description Dimensions (mm)
4729S 102 x 15 x12 2.5 4720 Single Pole 18 x 9 x 14
4729M 114 x 18 x 20 4 4721 Double Pole 18 x 16 x 14
4729L 117 x 18 x 20 6 4722 Three Pole 18 x 24 x 14

EUROPEAN EDISON SCREW BASE SOCKETS


Catalog No. Description Nipple Thread Size
BRASS MEDIUM SCREW BASE SOCKETS
2416 All Polished Brass 10mm (3/8" I.D.)
BRASS FRENCH CANDELABRA SCREW BASE SOCKETS (Edison-Mignon)
2430 All Polished Brass 10mm (3/8" I.D.)
BROWN BAKELITE MEDIUM SCREW BASE SOCKETS
2435 All Brown Bakelite with Brass Interior 10mm (3/8" I.D.)
2416 BROWN BAKELITE FRENCH CANDELABRA SCREW BASE SOCKETS (Edison-Mignon)
2430 2455 All Brown Bakelite 10mm (3/8" I.D.)
2435
2455 BRASS GOLIATH (Mogul) BASE SOCKETS
2463 Ventilated at Top, All Brass Body R - 3/8" (German Conduit)
BRASS MEDIUM SCREW BASE SOCKETS
2470 2470 All Polished Brass, with two mounting feet
2494 2472 All Polished Brass, with three mounting feet
BRASS MEDIUM SCREW BASE SOCKETS
2494 All Polished Brass, with two mounting feet

2463 2472

EUROPEAN BAYONET SOCKETS (double contact)


Porcelain Interiors - Brass Contacts
Catalog No. Description Nipple Thread Size
POLISHED BRASS STANDARD BAYONET SOCKETS
2308 With shade ring 10mm (3/8")
POLISHED BRASS STANDARD BAYONET SOCKETS
2327 All Polished Brass, with two mounting feet
2329 All Polished Brass, with three mounting feet
POLISHED BRASS MINIATURE BAYONET SOCKETS
2336 2329
2336 Plain without shade ring 10mm (3/8")

2308 2327

290 Murray Street 3726 Parker Street


Cambridge Montreal, QC H3C 2E2 Burnaby, BC V5C 3B1
Canada Canada
Agencies Telephone: (514) 875-5700 Telephone: (604) 205-0057
Limited Fax: (514) 875 8638 Fax: (604) 205-0027
Toll Free: 1-877-875-0057
Please see our ad in the Advertising Section E-mail: info@cambridgeagencies.com
0279-04 4/29/06 8:22 PM Page 279

285-06

EUROPEAN PLUGS and RECEPTACLES – 250 VOLT


Type 2-Pin Plugs and Receptacles European 3-Pin Plugs and Receptacles
10 Amp. 10 Amp.

1680 1691
1678 1693
•Pins: 5 mm
1675 •Diameter: 19 mm
between centers Catalog No. Description Finish
•Brass 1691 Single Wall Plug White
1693 Single Surface Receptacle White
•Solid units are furnished
with safety contacts
1682
•Manufactured in bakelite 6 AMP. PINS are:
Catalog No. Description Finish Round—4 mm Diameter—19 mm between Centers—Brass—Slotted
1675 Single Wall Plug Brown 10 AMP. PINS are:
1676 Single Wall Plug White Round—5 mm Diameter—10 mm between Centers—Brass—Solid
1678 Surface Receptacle White
1680 Flush Receptacle White
1682 Double Surface Receptacle White

CEEFORM WIRING ACCESSORIES


Watertight plugs male, double watertight, IP67 for IP44 Watertight plugs female, double watertight, IP67 for IP44
Catalog Catalog
No. Voltage Poles Ampere Earth pin. No. Voltage Poles Ampere Earth pin.

04101 380 4 16 6H 04131 380 4 16 6H


04104 380 4 32 6H 04134 380 4 32 6H
04107 380 4 63 6H 04137 380 4 63 6H
04108 380 5 63 6H 04138 380 5 63 6H

Watertight receptacles, double watertight, IP67 for IP44 Double watertight for container use, 3-poles with
earth 32 Amp. 3 hours position.
Catalog
No. Voltage Poles Ampere Earth pin.
Catalog Earth
Description
04161 380 4 16 6H No. Pin
03658
04164 380 4 32 6H 03658 Container female plug 3H
04167 380 4 63 6H
04168 380 5 63 6H
Double watertight for container use, 3-poles with
Double watertight for container use, 3-poles with earth 32 Amp. 3 hours position.
earth 32 Amp. 3 hours position.
Catalog Earth
Catalog Earth Description
Description No. Pin
No. Pin
Container receptacle
03645 Container male plug 3H 03671 with switch 3H
03645 03671

2-Pin Weatherproof Butyl Cord Connectors Cord Connector and Multi-Way Plug
10 Amp. 10 Amp.

1685 1686 1690 1688

Catalog No. Description Finish Catalog No. Description Finish


1685 2 Pin Plus Earth (Plug) Black 1688 Multi-Way Plug Tap White
1686 2 Hole Plus Earth (Receptacle) Black 1690 Cord Connector White

Stocking Wholesale/Distributor of marine and industrial electrical supplies


1623 Sagasta Street
Tampa, FL 33619 SUNCOAST ELECTRICAL SUPPLY, INC. Phone: (813) 248-1615
Fax: (813) 248-4353
Website: www.suncoastelectrical.com • e-mail: sales@suncoastelectrical.com
Specializing in all maritime electrical equipment – lamps, lights, fixtures, cable & spare parts from Europe, Japan & the U.S.
RECEPTACLES • PLUGS • SWITCHES • CONNECTORS • SOCKETS • LAMPS – See Our Ad Page for Many Featured Items!
0280-03 5/4/06 8:01 PM Page 280

286-06

European (Schuko) WIRING DEVICES European (Schuko) WIRING DEVICES


2 Pole 3 Wire Grounding 2 Pole 3 Wire Grounding
16 Ampere 250 Volt /10 Ampere 250 Volt (CEE-7) 16 Ampere 250 Volt/10 Ampere 250 Volt (CEE-7, CEE7-7)

70130 70140 70150


70100 79100 70110 70120
ATTACHMENT PLUGS
RECEPTACLES & ACCESSORIES 70130 European (SCHUKO) Plug. Angle cord grip. White. Rated
16/10 ampere 250 volt. Meets CEE 7-7 requirements.
70100 European (SCHUKO) Receptacle. White, 16/10 ampere Approvals—VDE, UTE, OVE, CEBEC.
250 volt. Snap-in design for panel mounting. 50 x 50mm 70140 European (SCHUKO) Plug. Straight cord grip. White.
modular size. Approvals—VDE, OVE, IMQ. Rated 16/10 ampere 250 volt. Meets CEE 7-7 requirements.
79100 Snap-In Support Frame (BEZEL) for panel mounting Approvals—VDE, OVE, SEMKO, NEMKO, KEMA, CEBEC,
Receptacle No. 70100. Grey. SF, UTE.
70110 European (SCHUKO) Receptacle. Ivory 16/10 ampere 70141 Same as 70140 above except in Black.
250 volt. Screw mounted-flanged design. Interchangeable 70150 European (SCHUKO) Plug. Straight cord grip. Black
52 x 52mm size. Approvals—VDE, KEMA. rubber. Rated 10/16 ampere 250 volt. Meets CEE 7-7
70120 European (SCHUKO) Receptacle. Grey 16/10 ampere requirements. Approvals—VDE, OVE, SEMKO, KEMA,
250 volt. Weatherproof hinged cover. Screw mounted flanged NEMKO, CEBEC. Recommended for heavy-duty
design with gasket. 51 x 51 mm size. Approvals—VDE. industrial equipment.
NOTE: The above plugs mate with European (SCHUKO)
receptacles and connectors and also French configuration
79120 79130 receptacles used in France, Belgium, Algeria and other countries.

70160

AMERICAN WALL BOX


70170
MOUNTING
ACCESSORIES CONNECTOR BODIES
(Also fits some European boxes.) 70160 European (SCHUKO) Connector Body. Straight cord grip.
White. 16/10 ampere 250 volt. Meets CEE-7 requirements.
79120 Adapter Frame. Mounts European (SCHUKO) receptacle Approvals—VDE, OVE, SEMKO, KEMA.
No. 70100 to standard size American wall box. 70170 European (SCHUKO) Connector Body. Straight cord grip.
79130 Wall Plate. White, for receptacle No. 70100 when used Black rubber. 16/10 ampere 250 volt. Meets CEE-7
with No. 79120 adapter frame. requirements. Approvals—VDE, OVE, SEMKO, KEMA,
CEBEC. Recommended for heavy-duty industrial equipment.

52906 52925

FLANGED
INLETS
MULTIPLE OUTLET POWER STRIP
52925 European (SCHUKO) 5 Outlet Power Strip With On/Off 70180 European (SCHUKO) Flanged Inlet. Black. 16/10 ampere
Lighted Switch. Black/Silver color. 16/10 ampere 250 volts. 250 volt. Meets CEE 7-7 requirements. 83 x 83 mm size.
Supplied with 2 meters of cord and molded-on plug. Equipped with weatherproof double pole on/off switch.
Approvals—VDE, OVE. Five inch wire leads provided. Mates with European
52906 European (SCHUKO) 6 Outlet Power Strip. Black/Silver (SCHUKO) connectors and French cord connectors.
color. 16/10 ampere 250 volts. Supplied with 2 meters of Provided with lift lid and built-in connector restraining device
cord and molded-on plug. that prevents disengagement when subjected to vibration.
Approvals—VDE, OVE. 70190 Same as No. 70180 without switch.

Distributors PORT MARINE OF CALIFORNIA Distributors for


for 1982 Gladwick St.
Rancho Dominguez, CA 90220
Tel: 310-631-5657 • Fax: 310-631-5759
E-mail: portmarine@earthlink.net
Complete Line of European & American Electrical Equipment
0281-03 4/29/06 8:25 PM Page 281

287-06

INTERNATIONAL ADAPTERS INTERNATIONAL ADAPTERS


2 Pole 3 Wire Grounding 2 Pole 2 Wire
30160 30140 30190 30340 30320 30300

30170 30150 30230 30350 30330 30310

European “SCHUKO”– EUROPEAN European/Australian – American


Adapter No. 30140 – Allows European “SCHUKO” CEE 7-7 Adapter No. 30340 – Allows European 250Volt two-wire and
(16A 250V) plugs to interface with United Kingdom BS1363 some three-wire round pin plugs to interface with NEMA 5-15R,
receptacles rated 13A 250 volt. Adapter has replaceable fuse. 5-15R (15A 125V), 5-20R (20A 125V) receptacles. Designed for
appliances that do not require grounding.
Adapter No. 30150 – Allows European “SCHUKO” CEE 7-7
(16A 250V) plugs to interface with Italian receptacles rated 10A
250 volt. Adapter No. 30350 – Allows European (250V) two-wire and some
three-wire round pin plugs to interface with NEMA 6-15R (15A
NOTE: 10A 250V receptacles are predominant in Italy. 250V) and 6-20R (20A 250V) receptacles. Designed for appliances
Adapter No. 30160 – Allows European “SCHUKO” CEE 7-7 that do not require grounding.
(16A 250V) plugs to interface with Italian receptacles rated 16A
250 volt.
Adapter No. 30170 – Allows European “SCHUKO” CEE 7-7
American – European/Australian
(16A 250V) plugs to interface with Swiss receptacles rated 10A Adapter No. 30300 – Allows NEMA 5-15P and NEMA 1-15P
250 volt. Adapter has replaceable fuse. (15A 125V) plugs to interface with almost all European 250 volt
round pin receptacles. Designed for appliances that do not require
European – EUROPEAN “SCHUKO” grounding.
Adapter No. 30190 – Allows Swiss (10A 250V) plugs to interface
with European “SCHUKO” CEE-7 receptacles rated 16A 250V.
Adapter No. 30310 – Allows NEMA 5-15P and NEMA 1-15P
Adapter No. 30230 – Allows Italian (10A 250V) and (16A 250V) (15A 125V) plugs to interface with almost all European 250 volt
plugs to interface with European “SCHUKO” CEE-7 receptacles round pin receptacles. Similar to Adapter No. 30300, this unit has
rated 16A 250V. insulated pins of the “EURO-PLUG” design. Designed for
appliances that do not require grounding.
UNITED KINGDOM ATTACHMENT PLUGS
2 Pole 3 Wire
Grounding Adapter No. 30320 – Allows NEMA 5-15P and NEMA 1-15P
(15A 125V) plugs to interface with United Kingdom 250 volt
72130 72140 72150 BS1363 receptacles. Designed for appliances that do not require
grounding.
72130 Compact body design. Angle cord grip. Insulated sleeves
on current carrying prongs. White. 13A 250V. Equipped
with 13 ampere fuse.
Adapter No. 30330 – Allows NEMA 5-15P and NEMA 1-15P
72140 Angle cord grip. White. Insulated sleeves on current (15A 125V) plugs to interface with Australian 250 volt receptacles.
carrying prongs. Impact resistant. Thermoplastic body. Designed for appliances that do not require grounding.
13A 250V. Recommended for medical/dental equipment.
72141 Same as 72140 except black.
72143 Same as 72140 except with 3 ampere fuse. White. NOTE: Adapters often have a different rating on the blade (plug) end and
72145 Same as 72140 with 5 ampere fuse. White. the receptacle end and caution should be exercised in their use.
72150 Straight cord grip. Black rubber. 13A 250V. 1. The over current protection is determined by the plug end.
Recommended for heavy duty industrial equipment. 2. The use of the adapter should be limited to the rating of the adapter.
Provides a weathertight seal when mated with 72170
connector body. Equipped with 13 ampere fuse.
NOTE: All United Kingdom Attachment Plugs listed are BSI approved,
and meet BS1363A requirements. Replacement fuses available.

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of European & Japanese fuses, Houston Office: 7140 Navigation • Houston, TX 77011
cabin equipment and watertight equipment. Tel: (713) 928-6288 • Fax: (713) 928-6289
Zero 284 4/29/06 8:26 PM Page 1

288-06

ZERO SURGE INC.


SURGE SUPPRESSORS / SURGE REMOVAL FILTERS
These non-MOV, UL 1449 Listed and UL 1449 Recognized Components have been tested by UL not only for safety but also for
performance and endurance under UL’s optional 1449 Adjunct Classification Program. The products were surge tested at 6,000V,
3,000A in 30 second intervals and experienced no failures or degradation. They withstood at least 10 years of the worst case surges.
Patented Spectrum WVR® technology allows the product to effectively suppress surges over a wide voltage range (85V - 175V) and
is recommended for applications where sensitive electronic equipment is used, voltage is variable and unpredictable (especially
where generators are used), brownout or blackout conditions occur, and versatility is needed. Optional Enhanced Spectrum WVR®
extends the range from 85V - 265V.

General Specifications:
Load ratings from 7.5 amps to 20 amps. 120 Volt AC, single phase and 85-175 wide voltage range.
UL® listed models meet UL 1449, UL 1283 and CSA (Canadian) Standards.
Certifications:
UL 1449 2nd Edition, UL 1283, CUL, 1,000 Worst Case Surge Endurance (UL 1449 Adjunct Classification).
Endurance: ANSI C62.41 Category B3(C1) (worst case).
Pulses: 6,000V, 3,000A:>1,000 surges (NRTL verified).
Dynamic Clamping Voltage Onset: 172 Volts nominal; 2 Volts above peak line voltage (auto-tracking).
Maximum Applied Surge Pulse: 6,000 Volts (1.2x50 μs), unlimited current (8x20 μs).
Maximum Applied Pulse Joule Rating: Unlimited rating (due to 8x20 μsec current limiting).
Voltage, Current Limiters: Series mode surge reactor current limiter; cascaded, auto-tracking dual polarity
voltage limiter; dual pulse inverters.
EMI/RFI Filter (bi-directional, wave tracking): (50 ohm generator, load): 3 db @5 kHz; 26 dB @100 kHz; >40 dB @300 kHz
for noise within the power wave envelope.
Let-through Slew Rate: 5000v/μsec disturbance reduced to 28v/μsec within AC power wave, and less than 10v/μsec outside power
wave envelope.

Stand Alone Products


2R Series - 2 outlet units (always on)
2R7.5W 7.5 amp unit.
2R15W 15 amp unit.
2R20W 20 amp unit and 20 amp power cord.
Requires 20 amp wiring and receptacles. 2R7.5W

8R Series - 8 outlet units (6 switched, 2 always on) 8R15W


Front and
8R7.5W 7.5 amp unit. Rear View
8R15W 15 amp unit.

Rack Mount Series - 10 outlets


1RM15W 19”, 1U rack mount, 15 amp reactor.
1RM20W 19”, 1U rack mount, 20 amp reactor, 20 amp plug.
Requires 20 amp wiring and receptacles.
Rack Mount
Optional: Units available with isolated receptacles and mounting brackets. Front and Rear View

Zero Surge Inc.


889 State Route 12 • Frenchtown, NJ 08825 • USA
Tel: 908-996-7700 • 800-996-6696 • Fax: 908-996-7773
E-MAIL: info@zerosurge.com
Serving the maritime industry for over 16 years. WEB SITE: www.zerosurge.com
285 4/29/06 8:27 PM Page 1

289-06

PELICAN PRODUCTS, INC.


PROTECTIVE CASES
BODY: Ultra high impact structural copolymer polypropylene
LATCHES: ABS CAT. NO. INTERIOR DIMENSIONS EXTERIOR DIMENSIONS
1010 415/16"Lx 213/16"W x 15/8"D 57/16"L x 41/16"W x 21/8"D
FOAM: EPDM 1.65lbs. polyether
(Also available in low and high density closed and open cell) 1020 51/4"L x 31/2"W x 15/8"D 63/8"L x 43/4"W x 21/8"D
PURGE VALVE: ABS sealed Gore-Tex® 1030 63/8"L x 25/8"W x 2"D 71/2"L x 37/8"W x 27/16"D
O-ring - EPDM W 1040 67/16"L x 313/16"W x 111/16"D 71/2"L x 51/16"W x 21/8"D
(One-way automatic purge valve (Mil-spec purge valves available) 1050 67/16"L x 313/16"W x 211/16"D 71/2"L x 51/16"W x 31/8"D
NOMINAL TEMPERATURE RANGE: 1060 85/16"L x 45/16"W x 213/16"D 93/8"L x 59/16"W x 25/8"D
-25˚C TO +80˚C -15˚F TO +175˚F L D

CAT. NO. INTERIOR DIMENSIONS EXTERIOR DIMENSIONS FEATURES & OPTIONS COLORS & WEIGHT (lbs.)
LxWxD LxWxD
• Optional Application Panel Frame Black, Silver, Blue, Orange, Yellow
1120 73/8" x 47/8" x 31/16" 81/4" x 69/16" x 39/16" • Fold Down Handle • Foam
Case only: 1, std. foam: 0.10,
boxed w/foam: 1.22

• Optional Application Panel Frame Black, Silver, Blue, Orange, Yellow


1150 83/8" x 57/8" x 311/16" 91/4" x 79/16" x 43/8" • Fold Down Handle • Foam
Case only: 1.56, std. foam: 0.16,
boxed w/foam: 2.06

• Optional Application Panel Frame • Fold Down Handle Black, Silver, Orange, Yellow
1200 93/8" x 71/4" x 41/16" 105/8" x 911/16" x 47/8" • Foam • Double Throw Latches
Case only: 2.68, std. foam: 0.23,
boxed w/foam 3.47

• Optional Application Panel Frame • Fold Down Handle Black, Silver, Orange, Yellow
1300 93/8" x 71/4" x 61/8" 105/8" x 911/16" x 67/8" • Foam • Double Throw Latches
Case only: 3.15, std. foam: 0.37,
boxed w/foam: 4.28

• Optional Application Panel Frame • Fold Down Handle Black, Silver, Orange, Yellow
1400 12" x 91/16" x 53/16" 133/8" x 115/8" x 6" • Foam • Double Throw Latches
Case only: 4.18, std. foam: 0.48,
boxed w/foam: 5.49

• Top load design • Single folding handle with no-slip overmolded


cushion grip • Optional nameplate • Optional mobile office insert set Black, Desert Tan
1430 143/16" x 63/8" x 1111/16" 167/8" x 811/16" x 13" • Optional photography/computer padded divider set
Case only: 5.6, std. foam: 1.7,
boxed w/foam: 6.5
• Optional shoulder strap

• Optional Application Panel Frame • Fold Down Handle • Optional Black, Silver, Orange, Yellow
1450 1413/16" x 103/8" x 6" 16" x 13" x 67/8" nameplate • Foam or Padded Dividers • Double Throw Latches
Case only: 6.10, std. foam: 0.78,
boxed w/foam: 8

• Fold Down Handle • Removable Shoulder Strap • Lid Organizer Black


1490 177/8" x 111/2" x 41/8" 197/16" x 1315/16" x 411/16" • Foam • Optional nameplate • Double Throw Latches Case only: 8.7

• Optional Application Panel Frame • Fold Down Handle Black, Silver, Orange, Yellow
1500 17" x 117/16" x 61/8" 181/2" x 141/16" x 615/16" • Optional nameplate • Foam or Padded Dividers
• Double Throw Latches
Case only: 6.41, std. foam: 0.97,
boxed w/foam: 8.70

• Extended Handle • Transport Wheels Black


1510 20 3/16" x 113/8" x 71/2" 22" x 14" x 9" • Optional Nameplate, Lid Organizer, Padded Dividers
Case only: 13.9,
boxed w/foam: 15.9
• Optional Application Panel Frame • Fold Down Handle Black, Silver, Orange, Yellow
1520 177/8" x 123/4" x 63/4" 191/8" x 157/16" x 79/16" • Optional nameplate • Foam or Padded Dividers
• Double Throw Latches
Case only: 8.07, std. foam: 1.26,
boxed w/foam: 10.8
• Optional Application Panel Frame • Fold Down Handle Black, Silver, Orange, Yellow
1550 183/4" x 143/8" x 75/8" 205/8" x 167/8" x 81/8" • Optional nameplate • Foam or Padded Dividers
• Double Throw Latches
Case only: 9.89, std. foam: 1.68,
boxed w/foam: 13.37
• Front and side fold-down handles with no-slip overmolded cushion grips Black, Desrt Tan, Silver, Orange, Yellow
1560 203/8" x 157/16" x 9" 221/16" x 1715/16" x 107/16" • Extendable handle with stainless steel ball bearing urethane wheels
• Optional nameplate
Case only: 16, std. foam: 2.5,
boxed w/foam: 18.5

• Foam or Padded Dividers Black, Silver, Orange, Yellow


1600 213/4" x 1613/16" x 77/8" 241/4" x 197/16" x 811/16" • Optional nameplate • Double Throw Latches
Case only: 12.16, std. foam: 2.40,
boxed w/foam: 16.52

• Transporter w/wheels & extension handle • Optional nameplate Black


1610 223/16" x 171/8" x 109/16" 249/16" x 195/16" x 1115/16" • Foam or Padded Dividers • Double Throw Latches
Case only: 22, std. foam: 4.5,
boxed w/foam: 30
Black
• Transporter w/wheels & extension handle • Optional nameplate
1620 221/16" x 17" x 129/16" 2413/16" x 19 3/8" x 137/8" • Foam or Padded Dividers • Double Throw Latches
Case only: 22, std. foam: 4.5,
boxed w/foam: 30

• Wheels Included • Fold Down Handle • Optional nameplate Black


1650 29" x 177/8" x 101/2" 321/2" x 20 1/2" x 115/16" • Foam or Padded Dividers • Double Throw Latches
Case only: 21.16, std. foam: 4.61,
boxed w/foam: 31
• Pre-installed wheel plates with removable casters (Included) Black, Desert Tan
0340 18" x 18" x 18" 203/8 x 201/2" x 191/4" • Built-in tow handle • Two double-wide side handles for two-
handed grip • Optional Nameplate
Case only: 24, std. foam: 5,
boxed w/foam: 29

• Fold Down Handle • Foam or Padded Dividers Black Case only: 26lbs without foam
0350 20" x 20" x 20" 221/2" x 227/16" x 211/4" • Double Throw Latches • Optional Nameplate • Optional Wheels
or wheels. std. foam: 4llbs,
boxed w/foam and wheels: 36lbs.

• Fold Down Handle • Foam or Padded Dividers Black Case only: 30lbs without foam
0370 24" x 24" x 24" 241/4" x 261/2" x 261/2" • Double Throw Latches • Optional Nameplate • Optional Wheels
or wheels. std. foam: 4lbs.,
boxed w/foam and wheels: 40lbs.

PELICAN CASES MEET MIL-STD 4150-J


UNCONDITIONAL
STACKING (400LBS.) • DROP TEST (48")
HUMIDITY, (120˚F AT 95% RH) • IMMERSION (2" AT 160˚F) LIFETIME PELICAN
You break it, we replace it... forever.
Cases are highly resistant to chemical attack. GUARANTEE
23215 Early Ave. • Torrance, CA 90505 • Tel (310) 326-4700
PELICAN is a registered trademark of Pelican Products, Inc.
OF EXCELLENCE Fax (310) 326-3311 • www.pelican.com sales@pelican.com
Gore-Tex® is a trademark of W. L. Gore & Associates.
0283-03 4/29/06 8:28 PM Page 283

290-06

HYDRAULIC MANUFACTURING COMPANY

Kinetic Water Ram


Opens Clogged Condenser Tubes, Toilets, Sinks,
Tubs, Urinals and Condensation Drains.
Opens clogged pipe lines up to 4" diameter ... 200 feet from stoppage.

The Kinetic Water Ram


uses a slug of compressed
air which suddenly and
swiftly strikes the column
of water in the blocked pipe.
The resulting wave of kinetic
energy, striking the resistance point
at approximately 4700 f.p.s. quickly
clears the blockage and flushes waste
particles away. The kinetic energy
developed is 98% forward and only
2% against the side walls of the pipe.
• 16 ga. plated steel cylinder tested
1/2 lb. water
head in vent for 600 lbs. pressure.
•160 lbs. gearless pressure gauge.
100 lb.plug • Self-contained air compressor. Complete Tool Kit and Accessories
• Exclusive check valve prevents • Metal Carrying Case
kick-back of water into supply 24 3⁄8" x 6 1⁄2" x 7 1⁄2"
hose. • Water Supply Hose
Kinetic energy developed by the
Water Ram strikes hardest at • Standard 1/2" pipe thread nozzle • Universal Faucet Adapter
the point of resistance and travels can be pushed up or down as • Threaded Faucet Adapter
so swiftly it by-passes stacks and required.
• 22" Extension Hose
vents before they can dissipate the • Equipped with Schraeder tire valve
• Moulded Rubber Cones
clearing force. for use with air compressor.
4" & 6"
Simple Operation: • 5 Rubber Adapter Plugs
1-1/4", 1-1/2", 2" 3" and 4"
1PUMP UP 2INSERT IN DRAIN 3 SNAP TRIGGER • Expansion Plugs
1-1/2", 2", 3", and 4"
• Check Valve Assembly

30 Day
2153 12th Street, P.O. Box 14057 • Sarasota, FL 34278 U.S.A. Money Back
Phone: 800-346-0789 • 941-365-3655 • Fax: 941-957-1006
Web Site: www.waterram.com • E-mail: waterram@acun.com
Guarantee
287 4/29/06 8:29 PM Page 1

291-06

SLOAN VALVE COMPANY


Dolphin Flushometers for U.S. Navy Ships – Conform with Mil-V-0015020F (Ships) and Amendments
Shock-Mounted Rigid Installation
Type I - Class A Quiet, chrome-plated brass closet Type I - Class B Quiet, chrome-plated brass closet
3057005 Flushometer for exposed installation 3057002 Flushometer for exposed installation
includes metal lever handle, 1" IPS includes metal lever handle, 1" IPS
screwdriver angle stop with protective cap, screwdriver angle stop with protective cap,
1-1/2" by 5" scored outlet. flush connection, coupling and flange for
1-1/2" top spud.
Type I - Class A Same as above except includes Silbraze Type I - Class B Same as above except includes Silbraze
3057004 inlet adapter with silver brazing ring.
3057006 inlet adapter with silver brazing ring.

Quiet, exposed, chrome-plated urinal


Type II - Class A Quiet, chrome-plated brass urinal Type II - Class B Flushometer with metal lever handle, 3/4"
Flushometer for exposed installation IPS screwdriver angle stop with 1/2" inlet
3057053 3057050 adapter, vandal resistant stop cap, and
includes metal lever handle, 3/4" IPS
screwdriver angle stop with protective cap, ground joint tailpiece. 3/4" Flush
3/4" scored outlet with 1/2" offset. connection with 1/2" offset. Does not
require water pressure to positively shut off.
Type II - Class A Same as above except includes Silbraze Type II - Class B Same as above except includes Silbraze
3057051 inlet adapter with silver brazing ring. inlet adapter with silver brazing ring.
3057052
Silbraze inlet furnished when specified. Flexible connections, spud couplings
and spud flanges for shock mounted Flushometers are not furnished. NOTE: Sloan Naval Flushometers may be substituted for any of the above.

Dolphin Flushometers for Private & Maritime Ships


•Oil operated control chamber is completely
isolated from water supply. Quiet, chrome-plated brass floor- or wall-mounted closet Flushometer
110-XYV
•Replaceable Delrin main seat protects the flush for exposed installation includes metal lever handle, 1" IPS screwdriver
valve body from irreparable damage caused by
3050135
angle stop with protective cap, adjustable tailpiece, flush connection,
wire-drawing. coupling and flange for 1-1/2" top spud.
•Rugged construction
•Positive manual opening and mechanical closing 110 Same as above except Flushometer includes a vacuum breaker.
assures a complete cycle of the valve that is not 3050100
dependent on water pressure.
• Handle can be positioned on either the left, front, 120-XYV Quiet, chrome-plated brass floor-mounted closet Flushometer for
or right for the most convenient installation. exposed installation includes metal lever handle, 1" IPS screwdriver
3050835
angle stop with protective cap, adjustable tailpiece, elbow flush
Variations connection and coupling for 1-1/2" back spud, wall and spud flanges.
-U Flush connection for 1-1/4" spud
-YG Bumper on valve for seat cover 120 Same as above except Flushometer includes a vacuum breaker.
-YN Bumper on flush pipe for closed front seat
-YO Bumper on angle stop for open front seat
3050800
If vacuum breaker is desired delete-XYV
186-1XYV Quiet, chrome-plated brass urinal Flushometer for exposed installation
How to Order includes metal lever handle, 3/4" IPS screwdriver angle stop with
3052635
1. Name of Valve (by type and class if required protective cap, adjustable tailpiece, flush connection and coupling for
for U.S. Navy) 3/4" top spud, wall and spud flanges.
2. Model Number
3. Letters designating variations, if any. 186-1 Same as above except Flushometer includes a vacuum breaker.
example: Dolphin 110-YG 3052600

Automatically Self-cleaning Shower Heads Model AC-450


Chrome-plated brass construction with integral mounting
Can’t drip or clog flange, adjustable spray direction, needle-spray pattern
The Sloan Act-O-Matic®
• Self-Cleaning action flushes interior design with integral (2.5 gpm/9.4 Lpm maximum) flow
Shower Head incorporates
after each use. control, tapped for 1/2" IPS supply. Includes mounting
a Spray Disc that moves
• Will Not Clog or Drip DISC UP plate and two (2) vandal-resistant screws.
DISC DOWN SHOWER
upward and downward
• Even Spray Pattern SHOWER ON OFF automatically due to line Conforms to all requirements of ANSI/ASME Standards
• Simple Construction – Single water pressure. With water ON, the disc A112.18.1M
moving part inside moves downward into shower position,
• Water Discharge limited to delivering an evenly distributed spray that can Model AC-11
2.5 gpm/9.4 Lpm. be directed as desired. When the water is Chrome-plated brass construction, universal ball joint,
• Adjustable Spray Direction & turned OFF, the Disc moves upward into the thumb screw volume control, vandal-resistant set screw
Flow Control draining position. All sand and other water- feature, needle-spray pattern design. Includes integral
• Connector fits all standard borne substances are completely washed out (2.5 gpm/9.4 Lpm maximum) flow control. Tapped for
shower arms. of the system. 1/2” IPS supply.

10500 Seymour Ave. • Franklin Park, IL 60131 • Phone: 1-800-982-5839 • Fax: 1-800-822-0683 • www.sloanvalve.com
Domestic and International Representatives, and technical and product information is available at our website: www.sloanvalve.com
288 4/29/06 8:30 PM Page 288

292-06

SLOAN VALVE COMPANY

1 Dolphin Flushometer
2 Parts List—Dolphin Flushometer Valve
3 Item Part
4 Number Number Description
1 DO-1 Cover Nut CP
5 6 2 DO-2 “O” ring-Seat (1 required; 6 per pkg.) (Cover Gasket)
3 DO-28 Retaining Ring (1 required; 24 per pkg.)
7 4 DO-4 Stem Nut RB (1 required; 6 per pkg.)
5 DO-5 Piston
6 DO-6 “O” ring-Piston (1 required; 6 per pkg.)
8 7 DO-7 Piston Spring (1 required; 6 per pkg.)
8 DO-11 Cover Screw CP (4 required; 24 per pkg.)
9 DO-10 Upper Body CP
10 9 10 DO-20 Handle and Socket Assembly CP
DO-26 Socket
DO-36 Handle Lever Cap
11 DO-3 Regulating Screw RB (1 required; 6 per pkg.)
12 DO-9 Stem RB
11 13 SH-75 “O” ring-Throttle Seal (2 required)
12 14 DO-14 Bushing RB
13 15 DO-16 Compression Spring (Main Spring)
16 DO-17 Insert RB (1 required; 6 per pkg.)
17 DO-15 “Flex-Sac”
18 DO-18 Seating Nut
19 DO-21 Main Seat, Delrin
14 20 DO-22 “O” ring-Seat Assembly
21 DO-13-NC Lower Body CP-Closet
DO-13-NU Lower Body CP-Urinal
15 22 DO-90-AAGNC Valve Body and Handle Assembly—Dolphin Type I
DO-90-AAGNU Valve Body and Handle Assembly—Dolphin Type II
23 H-710-A Bak-Chek® Control Stops are available in several styles: chrome-plated
16 or Naval brass, and Adjustable and Ground Joint Tail connection
17 options for 3/4” or 1” Inlet (Control Stop may require A-35 Reducer
Bushing or 1” F-41-A or 1/2” F-42-A Sil-Braze Adapter)
24 F-7 Supply Flange CP for 3/4” or 1” Inlet (Supplied When Valve is NOT
Ordered with Sweat Solder Kit)
18 25 H-633-AA 1" (25 mm) Sweat Solder Kit with Cast Set Screw Flange CP
19 H-636-AA 3/4" (19 mm) Sweat Solder Kit with Cast Set Screw Flange CP
20
26A F-41-A 1" (25 mm) Sil-Braze Adapter Assembly (includes F-40 and F-41-AA)
21 F-40 1" (25 mm) Sil-Braze Adapter (CP or RB)
F-41-AA Solder Ring kit for 1” (25 mm) Sil-Braze Adapter and F-48 “O” Ring
26B F-42-A 1/2" (13 mm) Sil-Braze Adapter Assembly (includes F-40 and F-42-AA)
F-40 1/2" (13 mm) Sil-Braze Adapter (CP or RB)
F-42-AA Solder Ring kit for 1/2” (13 mm) Sil-Braze Adapter and F-48 “O” Ring
26C A-35 3/4” (19 mm) NPT x 1/2” (13 mm) NPT Reducer Bushing
27 — Vacuum Breaker Assembly, Flush Connection, and Spud Coupling

25
26C
26B
26A
24 Replacement and Repair Kits
23
22 A DO-1000-A Piston with “O” ring (items 5, 6)
B DO-1001-A Repair Kit-Dolphin Handle (items 10, 11, 12, 13)
C DO-32 “Flex-Sac” Assembly (items 17, 18)
D DO-32-AA Repair Kit-“Flex-Sac” Assembly (items 2, 6, 13, 17, 18)
E DO-32-AAN Repair Kit-“Flex-Sac” and Stem (items 2, 6, 7, 13, 15, 17– 20)
F DO-19-A Seat Assembly with “O” ring (items 19 and 20)
G DO-12-A Upper Body Assembly (items 1–7 and 9–18)
27 H DO-13-A-NC Lower Body Assembly for Closet
(items 21A, H-6 Coupling, and NH-5 Ground Joint Tail)

10500 Seymour Ave. • Franklin Park, IL 60131 • Phone: 1-800-982-5839 • Fax: 1-800-822-0683 • www.sloanvalve.com
Domestic and International Representatives, and technical and product information is available at our website: www.sloanvalve.com
289 4/29/06 8:31 PM Page 1

293-06

SLOAN VALVE COMPANY

Parts List
Naval Flushometer
1 CN-74-A Cover Assembly CP
2 CN-1007-A Cap Screw Repair Kit - 6 per pkg.
3 CN-1008-A Regulating Screw Repair Kit
4 CN-1002-A Piston w/Main Seat - Closet
CN-1003-A Piston w/Main Seat - Urinal
CN-1009-A Piston w/Main Seat - Shower
5 CN-76 Cover Gasket - 12 per pkg.
6 A-31 Handle Gasket - 48 per pkg.
7 B-39 Handle Seal - 12 per pkg.
8 B-32-A Handle Assembly CP - 6 per pkg.
9 A-6 Handle Coupling CP
10 B-7-A CP Socket Assembly
11 B-32 CP Handle Grip
12 B-50-A Handle Repair Kit - 6 per pkg.
13 C-42-A 3'' Push Button Assembly CP
14 C-1000-A 3'' Push Button Replacement Kit
15 C-64-A 3'' Push Button Repair Kit
16 V-500-A 3/4'' x 9'' Vacuum Breaker
V-500-A 1-1/4'' x 9'' Vacuum Breaker
V-500-A 1-1/2'' x 9'' Vacuum Breaker
17 V-551-A Vacuum Breaker Repair Kit
18 F-5-A 3/4'' Spud Coupling CP
F-5-A 1-1/4'' Spud Coupling CP
F-5-A 1-1/2'' Spud Coupling CP
19 H-550 Stop Coupling CP
20 NH-551-A Adjustable Tailpiece 2-1/16'' CP
21 H-553 “O” Ring - 24 per pkg.
22 H-6 Ground Joint Stop Coupling CP
23 NH-5 Ground Joint Tailpiece 1-5/8''
24 H-710-A 1'' Adjustable Tailpiece SD Bak-Chek Control Stop CP
H-710-A 3/4'' Adjustable Tailpiece SD Bak-Chek Control Stop CP
25 H-710-AG 1'' Ground Joint Screwdriver Bak-Chek Control Stop CP
H-710-AG 3/4'' Ground Joint Screwdriver Bak-Chek Control Stop CP
26 H-541-A Control Stop Repair Kit*
H-543-A Control Stop Repair Kit**
27 H-622 CP Bonnet*
H-577 CP Bonnet**
28 H-573 Control Stop Cap CP*
Repair Parts
H-582 Control Stop Cap CP** CROWN/NAVAL VALVE WASHER SET - 6 per pkg. includes:
29 H-1010-A Vandal Resistant Stop Cap Assem.* 5314050 CN-1010-A 5, 6, 7, C, H, J, Cap Screw Gasket & Regulating Screw Packing
H-1009-A Vandal Resistant Stop Cap Assem.**
PISTON REBUILD KIT-CLOSET & URINAL - 6 per pkg. includes:
30 H-574 Control Stop Cap w/Bumper* 5314094 CN-1004-A 5, A, B, C, D, H, J, Cap Screw Gasket & Regulating Screw Packing
31 H-576 Control Stop Cap w/Extended Bumper*
PISTON REBUILD KIT-SHOWER - 6 per pkg. includes:
5314184 CN-1006-A 5, A, B, C, D, H, J, Cap Screw Gasket & Regulating Screw Packing
* for use with H-700-A 1'' and 3/4'' and H-600-A 1'' Screwdriver
Bak-Chek® Control Stops NOTE: NAVAL PISTONS CAN BE USED TO REPLACE PISTONS IN OLDER CROWN
** for use with H-600-A 3/4'' Screwdriver Bak-Chek® Control Stops AND STAR FLUSHOMETERS.

NO.4 PISTON
(EXPLODED VIEW)

Naval Piston Components COVER


A 5314200 CN-17 Top Plate Screws - 24 per pkg. TAILPIECE CONTROL STOP
B 0314082 CN-15 Top Plate BODY
0314179 CN-15-A Top Plate - Shower Valve only SUPPLY
HANDLE
C 5314188 CN-68-A Single Lip Cup - 12 per pkg. FLANGE
COUPLING
D 0314204 CN-57 Expelor
E 0314228 CN-160 Piston Body STOP COUPLING
F 5328019 SH-406 Spring - 12 per pkg. HANDLE
G 0314078 CN-18-A Relief Valve
H 5314226 CN-120 Relief Valve Seat - 12 per pkg. FLUSH CONNECTION
I 0314240 CN-123-AC Guide Assembly - Closet (VACUUM BREAKER)
0314242 CN-123-AU Guide Assembly - Closet SPUD FLANGE
SPUD COUPLING
0314189 CN-66-A Guide Assembly - Shower
J 0314234 CN-21-A Main Seat
0314223 CN-121-A Main Seat - Shower Valve only

10500 Seymour Ave. • Franklin Park, IL 60131 • Phone: 1-800-982-5839 • Fax: 1-800-822-0683 • www.sloanvalve.com
Domestic and International Representatives, and technical and product information is available at our website: www.sloanvalve.com
0290-03 4/29/06 8:32 PM Page 1

294-06

MOTT COMPANY

SINK MIXING FAUCET WITH SWING NOZZLE


105043 PRE-RINSE Swing nozzle. 8” centers on sink faucet with 1/2”
UNIT IPS eccentric flanged female inlets. Lever handles.
Complete unit with 105128 Faucet with 12” Swing Nozzle
mixing faucet for proper 105126 Faucet with 6” Swing Nozzle
water temperature. 8”
center deck faucet with
union coupling 105042 PRE-RINSE UNIT
connections for sink-top Complete unit including
installation. Unit is 40” mixing faucet for
high, above sink. temperature control. Deck
type with spring checks
and 1/4” tailpiece
construction on 4” centers.
Spring-action gooseneck
provides wide coverage.
Unit approx. 40” high
above sink.
105044 PRE-RINSE SPRAY
217570 WALL BRACKET WITH FLEXIBLE SS HOSE
A must on all gooseneck units. Furnished with 6” Heavy duty use. Automatic
nipple which allows adjustment for 6-3/4” to 2”, shut-off valve with spray head.
wall to center of clamp by Normally supplied with 3’
cutting off extra length of polished stainless steel hose
105062 ADD ON FAUCET
nipple. Also available with and 1/2” IPS male inlet.
FOR PRE-RINSE UNITS
Adds 6” swing nozzle to pre- 9”, 12”, 18” and 24” nipples.
rinse units. Includes 3” nipple.

TOILET SEATS

Solid plastic open front seat. Solid plastic seat and cover with Solid plastic seat and cover with
Available in black or white color regular hinge. For round front regular hinge. For elongated rim
for plain rim or elongated rim water closet. Available in open or water closet. Available open or
water closet. closed front. closed front.

PART # COLOR RIM TYPE PART # COLOR TYPE PART # COLOR TYPE
90901 Black Plain 90920 White Closed Front 90930 White Closed Front
90905 White Plain 90925 White Open Front 90935 White Open Front
90910 Black Elongated
90915 White Elongated

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
291 4/29/06 8:33 PM Page 1

295-06

MOTT COMPANY
84400 SINGLE HANDLE
EL 1.6 10” R TOILET - WHITE KITCHEN FAUCET
1.6 GPF 359mm (14-1/8”) Rim height. • 8” Center
Elongated 254mm (10”) Rough Flush • Chrome plated all brass body.
Valve toilet, less seat (vitreous china) • Metal Lever Handle
Elongated bowl only two (2) bolt caps, • 1/2” IPS connection
359mm (14-1/8”) rim height, top spud, PART # DESCR
siphon jet flush action, 254mm (10”) 114139 with Spray
rough-in. 114138 without Spray

TWIN HANDLE
KITCHEN FAUCET
84411 • 8” Center
17” EL 1.6/FV 10”R - WHITE • Chrome plated all brass body.
1.6 GPF Elongated 432mm (17”) Rim • Acrylic Handle
Height, 254mm (10”) Rough flush • 1/2” IPS connection
valve toilet, less seat (Vitreous china).
PART # DESCR
114143 with Spray
114142 without Spray

SINGLE HANDLE
LAVATORY FAUCET
• 4” Center
14654 • Chrome plated all brass body.
1.0 GPF URINAL - WHITE • Acrylic Handle
• 1/2” IPS connection
Washout flush action (Vitreous china)
Urinal, top inlet spud, outlet spud with PART # DESCR
38mm (1-1/2”) tubing tailpiece, less 114137 with Pop-up Assembly
supporting screws. 114136 without Pop-up Assembly

TWO HANDLE
LAVATORY FAUCET
• 4” Center
• Chrome plated all brass body.
• Acrylic Handle
197970 • 1/2” IPS connection
WALL HUNG LAVATORY - WHITE PART # DESCR
Vitreous china 114141 with Pop-up Assembly
508mm x 457mm (20” x 18”) 114140 without Pop-up Assembly
Faucet holes on 102mm (4”) centers.
POP-UP
WASTE ASSEMBLY
• Heavy Pattern
• Chrome plated brass.
COUNTERTOP LAVATORY - WHITE • Brass casting
Vitreous china
Self-rimming with template and color
matched sealant. PART # DESCR
508mm x 432mm (20” x 17”) 73425 Pop-up Assembly
81126 102mm (4”) centers
81142 203mm (8”) centers FAUCETS ALSO AVAILABLE
WITH LEVER HANDLES - Specify if desired
STAINLESS STEEL
GRAB BARS
• Grab Bars
• Tub Bars
• Shower Bars
• Angle Bars
• Commode Bars GRAB TUB SHOWER ANGLE COMMODE
BARS BARS BARS BARS BARS

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
292 4/29/06 8:34 PM Page 1

296-06

MOTT COMPANY
Lavatory Angle Supply Pipe Stainless Steel Lavatory
Chrome plated brass I.P.S. angle supply pipe with Type 304 stainless steel #18 gauge lavatory with antisplash rim,
reducing coupling, loose key stop and escutcheon. splash back and stainless steel bulkhead mounting brackets; fitted
One key furnished with each pair of supplies. with one Model No. 90405 and one Model No. 90410 C.P.
Model. No. Size Net Weight
self-closing basin faucets and Model No. 90420 C.P. pop up
90425 3/8” x 6” x 9” (152.40 mm x 228.60 mm) 1-1/2 lb. (.6804 kg)
waste.
90430 1/2” x 6” x 9” (152.40 mm x 228.60 mm) 1-3/4 lb. (.7938 kg)

Lavatory Straight Supply Pipe


Chrome plated brass I.P.S. straight supply pipe with reducing
coupling, loose key stop and escutcheon.
One key furnished with
each pair of supplies.
Model. No. Size Net Weight
90435 3/8” x 33” (838.20 mm) 2-1/4 lb. (1.0206 kg)
90440 1/2” x 33” (838.20 mm) 3-1/4 lb. (1.4742 kg)

Lavatory Flexible Supply Pipe


Chrome plated brass flexible supply pipe with loose
key stop, I.P.S. inlet and 1/2” O.D. x 20” flexible riser.
One key furnished
with each pair of stops.
Model No. Size Net Weight
Model. No. Size Net Weight
90020
90445 3/8” x 20” (508 mm) 1/2 lb. (.23 kg) 18” x 17” (457 mm x 432 mm) 24 lb. (10.89 kg)
with fittings
90501 1/2” x 20” (508 mm) 1/2 lb. (.23 kg)
90025
18” x 17” (457 mm x 432 mm) 20 lb. (9.07 kg)
less fittings
Vitreous China Lavatory
Vitreous china ledge type lavatory with overflow
and concealed bulkhead hanger. Vitreous China
Shockmounted Lavatory
Vitreous china shockmounted lavatory with
oval basin, full splash rim and recessed
outlet with shockmounted neoprene and
Model No. Size Net Weight steel concussion mounting with malleable
90010 14” x 11” (356 mm x 279 mm) 14 lb. (6.35 kg) iron brackets, neoprene and steel anchor bars, bolts,
nuts, washers and rubber sleeves. Over rim supply
fixture with self-closing valves, lift plug waste with
Adjustable “P” Trap metal knob, 1-1/4” O.D. tailpiece, 1-1/4” neoprene
Furnished with chrome plated strainer outlet tubing with stainless steel clamps.
with rubber gasket and bronze Model No. Size Net Weight
cleanout plug. Cast finish. 90015 17” x 16” (432 mm x 406 mm) 36 lb. (16.33 kg)
Model No. Size Net Weight
1 Lavatory
A 2” I.P.S. outlet – all bronze 18 lb. (8.16 kg)
B 2” SIL-braze outlet – all bronze 18 lb. (8.16 kg) 2 Concussion mounting
(Neoprene bonded to steel)
C 3” I.P.S. outlet – all bronze 20 lb. (9.07 kg)
3 Malleable, iron brackets
D 3” SIL-braze outlet – all bronze 20 lb. (9.07 kg)
4 Mounting anchor bar
(Neoprene cemented to steel)
Stainless Steel 5 Rubber concussion sleeve
6 Supply fitting
Wall Service Sink 7 Pop up waste fitting
Rugged stainless steel 10 Neoprene waste tubing
A Overhead supply 11 Tubing clamp
service sink designed for
B Bottom supply 12 Hexagon head machine screw
heavy-duty requirements. C Opening in back of 13 Hexagon nut
Model No. Size Net Weight lavatory for insert-
ing anchor bar.
A 18-1/2” x 23” 62 lb. (28.06 kg)

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
293 4/29/06 8:35 PM Page 1

297-06

MOTT COMPANY

Shower Shower Valve Brass Drain


Chrome plated brass exposed Chrome plated brass com- Chrome plated cast brass
shower with Model No. 90205 pression shower valve with drain with chrome plated
chrome plated brass compression indexed handles, flange for bulkhead brass removable strainer
shower valve with indexed mounting, 1/2” I.P.S. female union plate, brass locknut and leather washer.
handles, 1/2” I.P.S. chrome inlets. 6” center to center valve
plated brass riser, chrome plated can be reversed for supplies Model No. Size Net Weight
brass bulkhead support; Model from below. 6” center to center 91135
3-1/2” Dia. (88.90 mm)
1-1/2 lb. (.68 kg)
No. 90210 chrome plated brass acrylic handles with bracket. x 1-1/2” I.P.S.
ball joint shower head with 3 G.P.M. 91140
3-1/2” Dia. (88.90 mm)
1-1/2 lb. (.68 kg)
flow control. Valve can be reversed Model No. Size Net Weight x 2” I.P.S.
for supplies from below. 6” center 90205 6” center to center 3 lbs. (1.36 kg)
to center acrylic handles with
bracket. Chrome plated riser
and shower head. Curtain Snap Hook
Model No.
90201
Size
6” center to center
Net Weight
6 lbs. (2.72 kg)
Chrome plated brass curtain
snap hook for 1” O.D. rod.
Lavatory
Model No.: 90330 Faucet
Shower Curtain Net Weight: 1/4 oz. (7g) Chrome plated brass ball
bearing self closing type
Hold Back with four arm “H” or “C”
Chrome plated brass shower
curtain hold back.
Shower Drain indexed handle and
Chrome plated brass renewable seat.
Model No.: 90325
shower drain with Model No. Net Weight
Net Weight: 1-1/2 oz. (42g)
removable strainer. 90405 “H” index 1-1/2 lb. (.6804 kg)
90410 “C” index 1-1/2 lb. (.6804 kg)
Shower Curtain Rod Model No. Size
4-1/2” Dia. (114.30 mm)
Net Weight
1-1/2 lb.
1” O.D. No. 20 gauge chrome plated brass 90230
x 1-1/2” I.P.S. (.6804 kg)
straight shower curtain rod with chrome
plated cast brass bulkhead flanges. 90235
6” Dia. (152.40 mm)
x 2” I.P.S.
3-1/2 lb.
(1.5868 kg) Lavatory
Model No. Size Net Weight
Plug
Chrome plated cast
90240 3'-6” (106.68 cm) 2-1/2 lb. (1.14 kg)
brass patent overflow
90245 5'-0” (152.40 cm) 3 lb. (1.36 kg)
90301 6'-0” (182.88 cm) 3-1/4 lb. (1.47 kg) Lavatory Faucet plug with 1-1/4” O.D.
tailpiece, chain, chain stay
Chrome plated brass
compression type with and rubber stopper.
Model No.: 90415
four arm “H” or “C” indexed
Shower handle with renewable seat. Net Weight: 1 lb. (.4536 kg)

Curtain Model No.: 90401


Net Weight: 1 lb. (.4536 kg)
Shower curtain
with plated brass
grommets 8 ounce
white duck or
white nylon. Double Sink
Lavatory Faucet Lavatory
Model
No. Size
Net
Material Weight
Chrome plated brass Pop Up Drain
double sink faucet, Chrome plated brass
48” x 72” White 1-1/2 lb. exposed back
90305
(121.92 cm x 182.88 cm) Duck (.68 kg)
pop up drain with
mount, 1/2” (12.70 mm) 1-1/4” O.D. tailpiece.
72” x 72” White 2 lb. I.P.S. adjustable male
90310 Model No.: 90420
(182.88 cm x 182.88 cm) Duck (.91 kg) flange inlets 8” (203.20 mm) center Net Weight: 1 lb. (.4536 kg)
48” x 72” White 1 lb. to center, 6” (152.40 mm) swing spout,
90315
(121.92 cm x 182.88 cm) Nylon (.45 kg) soap dish and lever handles indexed
72” x 72” White 1-1/2 lb. “H” and “C”.
90320
(182.88 cm x 182 88 cm) Nylon (.68 kg) Model No.: 91001 Net Weight: 3 lb. (1.36 kg)

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
294 4/29/06 8:36 PM Page 1

298-06

MOTT COMPANY
Chrome plated cast Chrome plated cast
Chrome plated brass brass open pattern brass soap dish with
double sink faucet, soap dish with drain holes and
exposed deck mount chrome plated cast chrome plated cast
1/4” (6.35 mm) I.P.S. brass bracket. brass bracket.
male threaded union Model No. Size Net Weight Model No. Size Net Weight
tailpieces 8” 4-3/8” x 3-3/8” 4-1/4” x 3” 1-1/2 lbs.
(203.20 mm) center 94030 3/4 lb. (.34 kg) 94035
(111.13 mm x 85.73 mm) (107.95 mm x 76.20 mm) (.68 kg)
to center 8” (203.20 mm) swing spout and
lever handles indexed “H” and “C”.
Model No. Net Weight
91015 4 lbs. (1.81 kg)

Chrome plated brass


single compression
Chrome plated brass single faucet with plain end faucet with
14” (355.60 mm) long swing spout, 1/2” “T” handle, male
(12.70 mm) I.P.S. female threaded inlet I.P.S. threaded inlet.
and chrome plated Model No. Size Net Weight
brass four-arm Chrome plated brass single 91101 1/2” (12.70 mm) 1/2 lb. (.23 kg)
handle. Available compression faucet with 91105 3/4” (19.05 mm) 3/4 lb. (.34 kg)
for supply from 91020 gooseneck spout, 1/4”
above or below. (6.35 mm) I.P.S. male
threaded union tailpiece and
Model No. Net Weight lever handle indexed “C”.
91020 Supply From Above 3 lbs. (1.36 kg) Model No. Net Weight
91025 Supply From Below 3 lbs. (1.36 kg) 91035 1-1/2 lbs. (.68 kg) Chrome plated brass
single compression
hose end faucet with
“T” handle, male
I.P.S. threaded inlet.
Model No. Size Net Weight
91110 1/2” (12.70 mm) 1/2 lb. (.23 kg)
91115 3/4” (19.05 mm) 3/4 lb. (.34 kg)

Chrome plated brass double


4” centers. Double pantry faucet. compression faucet with
18” swing nozzle. Swivels from gooseneck spout, 1/4”
the top. 3/8” I.P.S. riser. 26-3/4” (6.35 mm) I.P.S. male
tip of nozzle above deck. Level Chrome plated brass
threaded union tailpieces single compression
handles. 1-1/8” dia. shank. 4” (101.60 mm) center to plain end faucet with
Model No. Size Net Weight center and with lever “T” handle I.P.S.
1/4” I.P.S. Union 7.80 lbs. handles indexed “H” female threaded
C and “C”.
Type Tailpieces (3.538 kg) flange inlet.
Model No. Net Weight Model No. Size Net Weight
91040 4-1/2 lbs. (2.04 kg) 91120 1/2” (12.70 mm) 3/4 lb. (.34 kg)

Rough chrome plated brass service sink


faucet with rigid hose end spout,
vacuum breaker, 1/2” (12.70 mm) I.P.S.
female threaded adjustable union inlet
couplings, 8” Chrome plated Chrome plated brass
(203.20 mm) brass ball bearing single compression
center to center self closing single plain end faucet with
and with level faucet with four “T” handle I.P.S.
handles indexed ball handle indexed male threaded
“H” and “C”. “H” or “C”. adjustable flange.
Model No. Net Weight Model No. Net Weight Model No. Size Net Weight
91030 4 lbs. (1.81 kg) 91045 3/4 lb. (.34 kg) 91125 1/2” (12.70 mm) 3/4 lb. (.34 kg)

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
295 4/29/06 8:37 PM Page 295

299-06

MOTT COMPANY

Chrome plated No. 20 gauge stainless steel toilet shelf with


cast brass 1/2” turned up
serrated three edges, drain
arm swinging holes and
towel rack with bulkhead bracket. bulkhead brackets.
1/4” plate glass mirror, electro copper back Model Net
with polished stainless steel angle frame, Model Net
No. Size Weight
galvanized steel back and concealed hanger. No. Size Weight
15” x 4” 1 lb.
4-1/2” high (114.30 mm) 93920
Model Net 2-1/2 lbs. (381.00 mm x 101.60 mm) (.45 kg)
93925 2-1/8” Wide (53.98 mm)
No. Size Weight (1.13 kg)
11-1/4” Projection (285.75 mm)
12” x 18” 7 lbs.
93905
(304.80 mm x 457.20 mm) (3.18 kg)
16” x 20” 10-1/2 lbs.
93910
(406.40 mm x 508.00 mm) (4.77 kg)

93915
18” x 24” 13-1/2 lbs. Heavy duty lever drain, bronze
(457.20 mm x 609.60 mm) (6.13 kg) body, stainless steel strainer. Chrome plated cast brass
tumbler and toothbrush holder.
Model No. Net Weight Inside diameter of ring 2-5/8” (66.68 mm)
91210 8 lbs. (3.63 kg)
Model No. Net Weight
Chrome plated
94045 1/2 lb. (.23 kg)
brass towel bar
with chrome plated Chrome plated
cast brass bulkhead brackets. brass serrated
towel bar with chrome
Model Net plated cast brass bulkhead brackets.
No. Size Weight
1” O.D. x 18” 1-1/2 lbs. Model Net Chrome plated cast brass
93940 No. Size Weight ring tumbler holder.
(25.40 mm x 457.20 mm) (.68 kg)
1” O.D. x 24” 1-3/4 lbs. 93930
1” O.D. x 18” 1-1/2 lbs. Inside diameter of ring 2-5/8” (66.68 mm)
93945 (25.40 mm x 457.20 mm) (.68 kg)
(25.40 mm x 609.60 mm) (.79 kg)
1” O.D. x 24” 2 lbs. Model No. Net Weight
1” O.D. x 30” 2 lbs. 93935
94001 (25.40 mm x 609.60 mm) (.91 kg) 94101 1/2 lb. (.23 kg)
(25.40 mm x 762.00 mm) (.91 kg)

HOOKS AND DOOR HOLDERS


A B C D E F
Type Proj. Size Material
A 3-1/2” Ht. 4-1/2” Alum.
B 3” Ht. 3-1/4” Brass
C 3” Ht. 2-1/4” Brass
D 3” Ht. 2-1/4” Brass
M E 3-1/8” 2-3/4” Dia. Brass
G I J K F 3-1/4” 3” Dia. Brass
H
G 2-3/4” 3-1/4” x 3-1/2” Brass
H 3” Ht. 4-1/2” Alum.
I 2-3/4” Ht. 5-3/4” Brass
J 3-1/4” 2” Dia. Brass
N K 3” Ht. 3-3/4” Brass
Q M 1-3/4” Ht. 2” Alum.
N 1-3/4” Ht. 1-3/8” Brass
S U Q 2-1/4” Ht. 2” Brass
T R 3” 2” Dia. Brass
X S 3-3/4” Ht. 5-1/2” Brass
R Y T 2-1/2” 1” Dia. Brass
U 3-1/2” Ht. 5-1/2” S. Stl.
X 2-1/4” 5.16 C to C Alum.
Y 3” 2” O.D. Alum.

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
296 4/30/06 9:10 PM Page 296

300-06

MOTT COMPANY

URINAL SHOCKMOUNTED SINK FAUCETS


1—China urinal Chrome plated brass double sink
2—Concussion mounting faucet exposed deck mount with
(Neoprene bonded to steel) loose key stops, 1/2” (12.70 mm)
4, 6, 7, 8—Bolts, nuts, Neoprene I.P.S. female flange inlets, 8”
sleeves and washers (203.20 mm) center to center, 6”.
5—Speed grip nuts (152.40 mm) swing spout, soap
9, 10, 11, 12—Bolts, nuts and dish and lever handles indexed
washers for mounting
“H” and “C”.
15—Outlet tailpiece
20, 21—Flexible supply tubing Model No. Net Weight
and tailpiece 91010 5 lbs. (2.27 kg)
27—Neoprene concussion snubber
29, 30, 31, 32—Bolts, nuts and
washers for snubber
Chrome plated brass double
Sectional View Showing Shockproof
sink faucet, exposed deck mount,
Method of Support 1/2” (12.70 mm) I.P.S. female
inlets 8” (203.20 mm) center to
Model No. Net Weight center, 6” (152.40 mm) swing
90115 32 lbs. (14.51 kg) spout, soap dish and lever
handles indexed “H” and “C”.
Vitreous china shockmounted urinal with shock mounted neoprene
and steel concussion mounting, bolts, nuts, washers and rubber Model No. Net Weight
sleeves, rubber snubbers, chrome plated dolphin flush valve, with 91005 4 lbs. (1.81 kg)
metal handle, 1/2’’ screw driver angle stop, 3/4” O.D. straight flush
connection with spud nut and escutcheon.

STOP VALVES
Chrome plated brass angle pattern loose key.
One key furnished with each pair of stops.
WATER CLOSET SHOCKMOUNTED Model No. Size Net Weight
90505 3/8” (9.53 mm) 1/2 lb. (.23 kg)
Vitreous china shockmounted water 90510 1/2” (12.70 mm) 1/2 lb. (.23 kg)
closet with neoprene and steel concussion
mounting, rubber snubber, neoprene and Chrome plated brass straight pattern loose key.
steel anchor bars, bolts, nuts, washers and One key furnished with each pair of stops.
rubber sleeves; neoprene discharge
Model No. Size Net Weight
elbow, stainless steel clamps. Chrome
90515 3/8” (9.53 mm) 1/2 lb. (.23 kg)
plated dolphin flush valve with metal
90520 1/2” (12.70 mm) 1/2 lb. (.23 kg)
handle, 1’’ screw driver angle stop,
chrome plated 1-1/2” O.D. elbow flush
connection with flexible hose, clamps, Chrome plated brass angle pattern with
chrome plated spud escutcheon, gasket wheel handle.
and ring: black plastic open front seat Model No. Size Net Weight
with self sustaining check hinge. 90525 3/8” (9.53 mm) 1/2 lb. (.23 kg)
90530 1/2” (12.70 mm) 1/2 lb. (.23 kg)
Model No. Net Weight
90045 65 lbs. (29.48 kg) Chrome plated brass straight pattern with
wheel handle.
Model No. Size Net Weight

BRASS DRAIN PLUG 90535


90540
3/8” (9.53 mm)
1/2” (12.70 mm)
1/2 lb. (.23 kg)
1/2 lb. (.23 kg)

Chrome plated cast brass drain plug with


chrome plated brass stopper, brass locknut DECK DRAIN
and 1-1/2” O.D. # 17 gauge tailpiece Chrome plated cast brass deck drain with
chrome plated cast brass removable strainer.
Model No. Size Net Weight Model No. Size Net Weight
3” dia. (76.20 mm) x 4-1/2” dia. (114.30 mm) x
91130 1-1/2 lb. (.68 kg) 91145 1-1/2 lb. (.68 kg)
1-1/2” I.P.S. 1-1/2” I.P.S.
6” dia. (76.20 mm) x
91201 3-1/2 lb. (1.59 kg)
1-1/2” I.P.S.

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
297 4/30/06 9:11 PM Page 1

301-06

MOTT COMPANY
TOILET PAPER HOLDERS BRASS CONTINUOUS WASTE
Chrome plated brass toilet paper holder with chrome
plated brass lock spring roller and chrome plated cast
brass bulkhead brackets.
Model No. Net Weight
94105 2 lbs. (.91 kg) 1-1/2” O.D. No. 17 gauge with slip joint inlets 24” center to center,
end cleanout cap, and 1-1/2” O.D. end outlet tailpiece.

Model No. Units Inlet Size Finish Net Weight


90610 2 1-1/4” Plain 3 lbs. (1.36 kg)
GALLEY OR SHRIMP 90615 2 1-1/2” Plain 3 lbs. (1.36 kg)

BOAT PUMPS 90620


90625
3
3
1-1/4”
1-1/2”
Plain
Plain
5 lbs. (2.268 kg)
5 lbs. (2.268 kg)
Brass pump with 2” inside diameter cylinder, 90630 2 1-1/4” Chrome 3 lbs. (1.36 kg)
reversible handle, 1” I.P.S. suction and 90635 2 1-1/2” Chrome 3 lbs. (1.36 kg)
compression faucet. 90640 3 1-1/4” Chrome 5 lbs. (2.268 kg)
Model No. Net Weight 90645 3 1-1/2” Chrome 5 lbs. (2.268 kg)
91215 12 lbs. (5.40 kg)

FLUSH VALVE CONNECTIONS


BOTTLE CAP OPENERS
Chrome plated brass. Chrome plated brass vacuum breaker with integral
flush connection.
Model No. Net Weight
94125 2 oz. (57 g) Model No. Size Net Weight
1-1/2” O.D. x 9” 1/2 lb.
90805
(38.10 mm x 228 mm) (.23 kg)

TRAPS
Chrome plated brass No. 17 gauge swivel Chrome plated brass straight flush connection with spud
pattern “P” trap with cleanout, slip joint inlet. nut and escutcheon.
Model No. Size Net Weight
Model 1-1/4” O.D. x 6”
No. Size Net Weight 90730 1/2 lb. (.23 kg)
(31.75 mm x 152.40 mm)
93801 1-1/4” (31.75 mm) 1 lb. (.45 kg) 1-1/2” O.D. x 6”
90735 1/2 lb. (.23 kg)
93805 1-1/2” (38.10 mm) 1-1/2 lb. (.45 kg) (38.10 mm x 152.40 mm)
1-1/2” O.D. x 24”
90740 1-3/4 lb. (.79kg)
(38.10 mm x 609.60 mm)
Chrome plated brass No. 17 gauge
swivel pattern full “S” trap with cleanout,
slip joint inlet. Chrome plated brass elbow flush connection with
Model spud nut and escutcheon.
No. Size Net Weight
Model Net
1-1/4” x 20-1/2”
93810 2 lb. (.91 kg) No. Size Weight
(31.75 mm x 520.70 mm)
1-1/2” O.D. x 5 x 11-1/2” 1 lb.
1-1/2” x 20-1/2” 90745
93815 2-1/2 lb. (1.13 kg) (38.10 mm x 127 mm x 292.10 mm) (.45 kg)
(38.10 mm x 520.70 mm)
1-1/2” O.D. x 1-1/4” O.D. x 5” x 11-1/2”
3/4 lb.
90801 (38.10 mm x 31.75 mm x 127 mm x
(.34 kg)
292.10 mm)
Chrome plated cast brass sediment and hair
intercepter trap, slip joint inlet and I.P.S.
female threaded outlet. Chrome plated brass vacuum breaker.
Model Model No. Size Net Weight
No. Size Net Weight 1-1/2” I.P.S. Female x 1/4 lb.
90810
93825 1-1/2” (38.10 mm) 9 lb. (4.08 kg) 1-1/2” I.P.S. Male (.11 kg)

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
298 4/30/06 9:12 PM Page 1

302-06

MOTT COMPANY
TRAPS

Cast Brass Ground Joint Swivel Pattern “P”


Traps With Cleanout and Slip Joint Inlet
Size Weight Model No.
inches Lbs. Finish Outlet: Outlet:
(mm) (kg) Silbraze C.T.S. I.P.S. Female Threaded
1-1/4 4.88 Rough 91301 91330
(31.75) (2.22) Chrome 91305 91335
1-1/2 4.08 Rough 91310 91340
(38.10) (1.85) Chrome 91315 91345
2 7.26 Rough 91320 91401
(50.80) (3.30) Chrome 91325 91405
C.T.S. = Copper Tube Size

This graphic applies to all the items that follow.

Cast Brass Ground Joint Swivel Pattern “P” Traps With Cleanout
Model No.
Size Weight
Inlet: Outlet: Inlet: Outlet: Inlet: Outlet: Inlet: Outlet:
inches Lbs. Finish
Silbraze Silbraze Silbraze I.P.S. Female I.P.S. Female Silbraze I.P.S. Female I.P.S. Female
(mm) (kg)
C.T.S. C.T.S. C.T.S. Threaded Threaded C.T.S. Threaded Threaded
1-1/4 5.06 Rough 91520 91601 91740 91820
(31.75) (2.30) Chrome 91525 91605 91745 91825
1-1/2 3.18 Rough 91530 91610 91801 91830
(38.10) (1.44) Chrome 91535 91615 91805 91835
2 8.28 Rough 91540 91620 91810 91840
(50.80) (3.76) Chrome 91545 91625 91815 91845
C.T.S. = Copper Tube Size

Cast Brass Ground Joint Swivel Pattern “P” Traps With Cleanout
Model No.
Size Weight
Inlet: Outlet: G.J.U. Inlet: Outlet: Inlet: Outlet: G.J.U. Inlet: Outlet:
inches Lbs. Finish
Silbraze I.P.S. Female Silbraze Silbraze I.P.S. Female I.P.S. Female I.P.S. Female Silbraze
(mm) (kg)
C.T.S. Threaded C.T.S. G.J.U. C.T.S. Threaded Threaded Threaded G.J.U. C.T.S.
1-1/4 6.69 Rough 91630 91710 91901 91930
(31.75) (3.03) Chrome 91635 91715 91905 91935
1-1/2 5.89 Rough 91640 91720 91910 91940
(38.10) (2.67) Chrome 91645 91725 91915 91945
2 10.16 Rough 91701 91730 91920 92001
(50.80) (4.60) Chrome 91705 91735 91925 92005
C.T.S. = Copper Tube Size
G.J.U. = Ground Joint Union

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
299 4/30/06 9:13 PM Page 1

303-06

MOTT COMPANY
TRAPS

Cast Brass Ground Joint Swivel Pattern “P”


Traps With Cleanout and Slip Joint Inlet
Size Weight Model No.
inches Lbs. Finish Outlet: G.J.U. Outlet:
(mm) (kg) I.P.S. Female Threaded Silbraze G.J.U. C.T.S.
1-1/4 6.15 Rough 91410 91440
(31.75) (2.79) Chrome 91415 91445
1-1/2 5.35 Rough 91420 91501
(38.10) (2.43) Chrome 91425 91505
2 9.14 Rough 91430 91510
(50.80) (4.15) Chrome 91435 91515
C.T.S. = Copper Tube Size
G.J.U. = Ground Joint Union

This graphic applies to all the items that follow.

Cast Brass Ground Joint Swivel Pattern “P” Traps With Cleanout
Model No.
Size Weight
Inlet: G.J.U. Outlet: Inlet: G.J.U. Outlet: Inlet: Outlet: Inlet: Outlet:
inches Lbs. Finish
I.P.S. Female Silbraze I.P.S. Female I.P.S. Female Silbraze Silbraze Silbraze I.P.S. Female
(mm) (kg)
Threaded C.T.S. Threaded Threaded G.J.U. C.T.S. C.T.S. G.J.U. C.T.S. Threaded
1-1/4 6.69 Rough 92010 92040 92230 92310
(31.75) (3.03) Chrome 92015 92045 92235 92315
1-1/2 5.89 Rough 92020 92101 92240 92320
(38.10) (2.67) Chrome 92025 92105 92245 92325
2 10.16 Rough 92030 92110 92301 92330
(50.80) (4.60) Chrome 92035 92115 92305 92335
C.T.S. = Copper Tube Size
G.J.U. = Ground Joint Union

Cast Brass Ground Joint Swivel Pattern “P” Traps With Cleanout
Model No.
Size Weight
Inlet: G.J.U. Outlet: G.J.U. Inlet: G.J.U. Outlet: Inlet: Outlet: G.J.U. Inlet: Outlet:
inches Lbs. Finish
I.P.S. Female I.P.S. Female I.P.S. Female Silbraze Silbraze I.P.S. Female Silbraze Silbraze
(mm) (kg)
Threaded Threaded Threaded G.J.U. C.T.S. G.J.U. C.T.S. Threaded G.J.U. C.T.S. G.J.U. C.T.S.
1-1/4 6.66 Rough 92120 92201 92340 92420
(31.75) (3.02) Chrome 92125 92205 92345 92425
1-1/2 7.16 Rough 92130 92210 92401 92430
(38.10) (3.25) Chrome 92135 92215 92405 92435
2 12.04 Rough 92140 92220 92410 92440
(50.80) (5.46) Chrome 92145 92225 92415 92445
C.T.S. = Copper Tube Size
G.J.U. = Ground Joint Union

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
441 5/1/06 9:41 PM Page 849

304-06

C-441: Aluminum Foil Tape (Aluminum-Colored)


2 mil aluminum foil backing with high-tack adhesive; total thickness 3.5 mils.
For sealing fiberglass ducts and duct insulation. Waterproof and vaporproof.
U.L. rated (standard #723). Available in 2” wide x 60 yd. rolls.

C-461: Clear Strapping Tape


1 mil polyester bidirectional fiberglass backing with high-tack adhesive; total thickness 7.5 mils.
Made with reinforcing filaments for strapping, unitizing, palletizing, holding, and reinforcing
applications that require exceptionally high tensile strength and resistance to shock and impact.
Available in 3/4” wide x 60 yd. rolls.

C-504: Coated Cloth Non-Skid Tape (Gaffer’s Tape)


Backing is vinyl coating on woven cotton cloth with a rubber-based adhesive;
total thickness 14 mils. Used instead of plain cloth tape where tape is subject
to moisture and weathering; weatherproof and vaporproof; scuff-resistant. Color: yellow.
Available in 3” wide x 60 yd. rolls.

C-520: Ductape (Aluminum-Colored)


Backing is polyethylene film laminated to cloth with high-tack rubber-based adhesive;
total thickness 12 mils. For sealing air ducts and applying insulation.
Available in 2” wide x 60 yd. rolls.

C-727: White Double-Faced Plastic Tape


Vinyl backing with high-tack synthetic rubber-based adhesive; total thickness 6 mils.
Useful as mounting adhesive where zero drying time is desired or where solvent evaporation
cannot be tolerated. Comes with release-coated paper liners which preserve the adhesive until use.
Available in 1-1/2” wide x 36 yd. rolls.

C-970: Cork Tape


Rubberized cork tape insulates cold pipes in air conditioning systems, freezers,
commercial refrigeration systems, and hot pipes as well. Made of ground virgin cork
and synthetic elastomers; will not harden or shrink; may be painted. Rolls are 1/8” x 2” x 30’.

“Manufacturers and Suppliers of Marine and Institutional Plumbing Products”


50 Portland Road, P.O. Box 87 • W. Conshohocken, PA 19428
Phone: 610.825.1223 • Fax: 610.828.7866
www.mottcompany.com
“Seaworthy since 1828” See Our Ad Page for other MOTT Products and what’s in store for next year!
301 4/30/06 9:15 PM Page 285

305-06

GENERAL WIRE SPRING CO.

Pipe and Drain Cleaners


75 ft. Electric Floor Model
with Automatic Feed
Clears lines stem to stern.
Holds 75 ft. of 3/8" cable.
Drum can be removed
for more portability or
to switch to a different
cable diameter. J-Drum
25 ft. Electric Hand Snake available for small drain
work.With automatic feed,
with Automatic Feed GFI and air foot switch.
For kitchen, bathroom, laundry drains and Cat. No. P-XP-B
lines up to 3" in diameter. Automatic feed Includes: 75 ft. x 3/8"
acts like a third hand in tight or awkward cable, automatic feed
spaces. Motor is double insulated, with and cutter set.
100 ft. Electric Floor Model reverse and variable speed switch.
with Automatic Feed Cat. No. PV-A-WC with case. Includes
25 ft. x 1/2" and 25 ft. x 3/8" cables and
Ten-inch wheels and a folding handle make cutter set.
this machine easy to move around. Big
drum capacity and automatic feed make it
capable of clearing the toughest stoppages.
Machine includes Flexicore ® cable, GFCI, and
air foot switch. 50 ft. Manual
Cat. No. P-ME-C Includes: 100 ft. x 1/2" Electric Water Jet Snake
cable, automatic feed
and cutter set. Large crank
handle on the
back of the
25 ft. Hand Cable drum provides powerful
leverage, giving operator
Compact container with the speed and momentum
collet chuck that tightens to break through a stubborn stoppage with
firmly on cable with quarter only a couple of turns.
turn. No chance of damag-
ing sink with thumbscrew. Cat. No. 450FL2 Includes: 50 ft. x 1/2" cable.
Turning handle can be
removed for attachment
to 3/8" or 1/2" drill.
Cat. No. D-25-8A Includes: 25 ft. x 5/16" cable.

Clears grease, sand and ice with a stream 3-6 ft. Telescoping
of high pressure water that pulverizes
stoppage and flushes it away. Gives you wall Closet Auger
to wall cleaning action. Vibra-pulse® helps Durable double layer spring enables
Wire Rope Center Cable hose glide around tight bends in auger to go through any bowl
narrow lines. Removable hose reel for without kinking. Additional 3 ft.
Heavy-gauge wire coiled tightly around compact storage.
49-strand aircraft-type wire rope length stored in tube for use when
and heat treated. Cat. No. J-1450-A Includes 150 ft. x 1/4" clog is just beyond bowl.
and 30 ft x 1/8" hoses and nozzle sets. Cat. No. T6FL-DH

1101-M Thompson Avenue • McKees Rocks, PA 15136 USA


Phone: 800-245-6200 or 412-771-6300 • Fax: 412-771-2771
www.drainbrain.com • E-mail: info@drainbrain.com
300 5/12/06 1:43 AM Page 1

306-06

GLIX PRODUCTS
DRAINING SOAP DISH RECESSED TOILET PAPER HOLDER FACIAL TISSUE
GLIX DSD/500 GLIX RTPH/500 DISPENSER
Slotted drain holes; Fits into wall opening 5-1/4 x 5-1/4” GLIX SM/500
3-1/8 x 3-7/8” W Overall size: 6-1/4 x 6-1/4” Takes standard
commercial tissue box.
Chrome, polished bronze
TOOTHBRUSH HOLDER or stainless steel finish.
GLIX TBH/515
1-1/8 X 3” W

DOUBLE ROBE HOOK


GLIX DRH/500-2 SURFACE TOILET TISSUE HOLDER
2-1/8 X 1-1/2 X 1-5/8” GLIX TP/PC/CS
7-7/16 X 1-1/2 X 3-1/2” ASH URN
GLIX SWU/500
Stainless steel, solid brass, bronze
REPLACEMENT ROLLER removable aluminum receptacle.
SINGLE ROBE HOOK 8” x 4-1/2”, 3-1/2”, 3-1/4” or 2-3/4”
GLIX SHR/500-1 GLIX RTP-6
Plastic, 5-7/8 x 1” 12” x 6”, 5-1/4”, 4-1/2” or 4-1/4”
5” Projection
Black, chrome, white.

ELECTRIC
SINGLE ROBE HOOK HAND DRYER
GLIX SRH/500-SH GLIX EHD 100
2-1/8 X 1-1/2 X 1-5/8” Surface Mounted. Area
required 10-3/4” x 8” x 7”.
TOWEL BAR
30-second drying cycle.
GLIX STB/500-4
Chrome or white.
3/4” Polished aluminum or stainless
steel. Square bar. ROUND WALL
HOOK & BUMPER 18”, 24” or 36” length. ASH URN
GLIX HB/90 GLIX AUR/770
3” Projection; cast brass, Stainless steel.
cast aluminum polished 7” center mounting
chrome. holes. 8-3/4” deep; 9”
front to back. Exposed
36” REPLACEMENT BAR screws.
Clear lucite plastic. 3/4” diam.
CP 36-36”, CP 24-24”, CP 18-18”
LIQUID SOAP
HANDICAP GRAB BAR DISPENSER
GLIX GB/650 GLIX DL/50
SPARE ROLL TOILET
ID of bar: 1”, 1-1/4”, 1-1/2” Plastic globe.
PAPER HOLDER
Flange 3” Chrome bracket.
GLIX STTH/500
Specify length: 8” to 60” 7” height; 16 oz.
Polished chromium plated or
Stainless steel, chrome/brass, Polyethylene globe.
24K gold plated.
aluminum. Exposed screws.

FLIP TOP ASHTRAY


GLIX SSFTA/500
Stainless steel, surface mounted.
Overall size: 5 x 1-1/4” x 3-5/8”
SOAP DISPENSERS
40-H Horizontal
Unless otherwise noted: All items on this page are available in stainless
40-V Vertical
steel (bright or satin finish) or zamak (triple chrome-plated zinc alloy).
Stainless steel tank-type. Tamper and
Units are surface mounted, concealed screw installation, and include
theft proof. Both styles have 40 oz.
installation flange of heavy gauge zinc.
capacity with top fill and service key.

BRASS ★ BRONZE ★ STAINLESS STEEL


Web: www.glixprod.com • E-Mail: sales@glixprod.com
Toll-free Telephone: Manufacturers of: Hinges/Locks/Hasps/Pulls/Handles/Knobs/Latches/Catches/Fasteners/Cabin Toll-free Fax:
(800) 233-6604 Door Hooks/Door Stops/Bolts/Coat & Hat Hooks/Lavatory Bath & Washroom Accessories (800) 233-5036
3071 4/30/06 9:18 PM Page 642

307-06

B-273 Single-Roll
Toilet Tissue Dispenser
B-700 with Controlled Delivery
Surface-Mounted Hand Dryer Cast aluminum with satin finish.
Autopilot operation. Cast iron cover with B-279 Surface-Mounted Small extrusion limits rotation of
enamel finish. Universal 1/10 hp motor; Waste Receptacle spindle to 3/4 revolution. Molded
6200 rpm; 150 cfm airflow. Stainless steel with satin finish. All
B-293 Tilt Mirror high-impact ABS plastic spindle.
Size: 13-3/4” W x 10-3/8” H x 7-1/4” D welded construction. Heavy-gauge
with Stainless Steel Frame Size: 6-1/2” W x 1-1/2” H x 4-7/8” D
Voltage: 115V AC or 208-240V AC vinyl liner. Size: 18” H x 14” W x 6” D
Mirror Sizes:
B-293 1630 16” W x 30” H
B-293 1830 18” W x 30” H B-2888
B-293 1836 18” W x 36” H Surface-Mounted
B-293 2436 24” W x 36” H Multi-Roll Toilet
Tissue Dispenser
B-822 Stainless steel
Lavatory-Mounted cabinet with satin
Soap Dispenser finish. All welded
B-709 Stainless steel piston, B-5191 Solid Phenolic Folding construction.
Surface-Mounted Hand Dryer spout & top cover. Shower/Dressing Area Seat Heavy-duty, one-piece molded high-
Autopilot operation. Aluminum casting Impact-resistant plastic 5/16” thick, one-piece fused plastic impact ABS plastic spindles.
with baked white enamel finish. body and shank. laminate surfaces. Integral slots for Size: 6-1/16” W x 11” H x 5-15/16” D
Size: 13-3/16” W x 10-5/16” H x 7-1/2” D Translucent, shatter- drainage. Stainless steel frame.
Voltage: 115V AC or 208-240V AC resistant polyethylene Seat Size: 18” W x 14-7/16” D
container.
Size: 17” overall height;
3-5/16” container diam.

B-826 Stainless Steel Grab Bar


with Snap Flange
Automatic
Surface-Mounted B-6806 – Satin Finish
Lavatory- B-6806.99 – Peened Finish
Soap Dispensers B-4262 Surface-Mounted
Mounted 1-1/2” diameter bar. Welded flanges. Paper Towel Dispenser
Horizontal – B-2112 Soap 1-1/2” clearance between bar and Stainless steel with satin finish. All
Vertical – B2111 Dispenser wall. Supports up to 900 lbs. welded construction. Corner radius
One-piece stainless steel container with Polished-chrome-plated plastic spout Lengths: 12”, 18”, 24”, 30”, 36”, 42” designed to match other Contura
satin finish. Molded plastic spout and with LED light indicators. Blinking red & 48”. Mounting kits available for Series washroom accessories.
push button. Corrosion resistant valve when soap level is low; blinking yellow different applications. Include wall Dispenses C-fold and multifold towels
(not for antibacterial soaps). when battery is low. Integral plastic description when ordering. One 3-1/8” to 3-13/16”. Size: 13-1/2” H x
B-2112: 8-1/8” W x 4-3/4” H x 3-1/2” D shank. Uses 4 alkaline D-cell batteries. mounting kit required for each flange. 10-13/16” W x 4-13/16” D
B-2111: 8-1/8” H x 4-3/4” W x 3-1/2” D Size: Spout 4-1/16” H x 5-3/8” D;
bottle and mechanism (below counter
surface) 13-5/8” H; motor
5-5/8” H x 3-1/8” W x 1-5/8” D

B-4112 Surface-Mounted
Soap Dispenser
Stainless steel with satin finish.
B-40 Soap Dispenser for Liquid Surface-Mounted Soap Dish B-262 Surface-Mounted Paper One-piece seamless construction.
& Lotion Soaps and Detergents B-680 (Bright Polished Finish) Towel Dispenser Corner radius designed to match
Black, translucent ABS container. B-6807 (Satin Finish) Stainless steel with satin finish. All other Contura Series washroom
Grey, high-impact-resistant ABS wall 22-gauge stainless steel. welded construction. Dispenses C-fold accessories. Dispenses most
bracket, lid, push button & spout. All welded construction. & multifold towels 3-1/8” to 3-13/16”. all-purpose hand soaps.
Size: 6-3/8” H x 5-13/16” W x 3-3/8” D Size: 4-1/4” W x 3-3/8” D x 2” H Size: 14” H x 10-3/4” W x 4” D Size: 6-1/8” H x 7” W x 3-5/16” D
When properly mounted, these units derive an ADA compliancy.

CENTRAL LOCK AND HARDWARE SUPPLY CO.


STOCKING DISTRIBUTOR OF RUSSWIN, YALE, STANLEY, DORMA, SARGENT, ALARM LOCK & BOBRICK
Everything from A to Z for all your finish hardware & bathroom accessory needs
Call or write today for specialty catalog.
E-mail: sales@cenlock.com Phone: 305-940-7650 or 305-940-7651 • Fax: 305-949-8945 95 N. W. 166th St.
Web: www.cenlock.com Toll Free Phone: 800-677-4549 • Toll Free Fax: 800-866-5035 Miami, Florida 33169
0300-03 5/12/06 1:44 AM Page 1

308-06

WILLIAM E. WILLIAMS VALVE CORP.


150 Lb. Flanged Bronze Gate Valves
Solid Wedge • Renewable Seat Rings • Integral Backseat
Fig. 141F Fig. 142F
Non-Rising Stem – Bolted Bonnet Rising Stem – OS&Y
The valves can be repacked under pressure when fully open. End flanges This gate valve has a rising stem, the threads of which operate through
are available faced only or drilled to conform to ANSI B16.24 for 150 lb. a renewable Acme threaded bushing. The movement of the stem above
bronze flanges. An indicator attachment showing the position of valve the hand wheel indicates the position of the valve opening. End flanges
opening can be supplied upon request. faced and/or drilled to ANSI B16.24. Monel trim available.

No. Part Material No. Part Material


1 Body ASTM B62 1 Body ASTM B62
2 Bonnet ASTM B62 2 Bonnet ASTM B62
3 Packing Box ASTM B62 3 Disc ASTM B62
4 Wedge ASTM B62 4 Handwheel ASTM A216
5 Seat Ring ASTM B62 GR WCB or A197
6 Stem ASTM B124 5 Yoke Sleeve ASTM B62
7 Gland Flange ASTM B62 6 Stem ASTM B124
8 Handwheel ASTM A216 7 Yoke Nut ASTM B62
GR WCB or A197 8 Gland Flange ASTM B62
9 Bonnet Stud ASTM B16 9 Handwheel Nut C/S 1020
10 Bonnet Nut ASTM A16 10 Bonnet Stud ASTM B16
11 Packing Box Stud ASTM B16 11 Bonnet Nut ASTM B16
12 Packing Box Nut ASTM B16 12 Gland Bolt ASTM B16
13 Gland Stud ASTM B16 13 Gland Nut ASTM B16
14 Gland Nut ASTM B16 14 Seat Ring ASTM B62
15 Packing Non-Asbestos 15 Packing Non-Asbestos
16 Bonnet Gasket Non-Asbestos 16 Gasket Non-Asbestos
17 Pkg. Box Gasket Non-Asbestos 17 Grease Nipple Steel
18 Handwheel Nut ASTM B16 18 Set Screw Steel
19 Washer Brass

Applicable Standards
ANSI B 16.24
MSS-SP-6
MSS-SP-9
MSS-SP-25
MSS-SP-82

Tests
Shell – 350 PSIG Hydrostatic
Seat – 225 PSIG Hydrostatic

Fig. 141F (Dimensions in Inches) Fig. 142F (Dimensions in Inches)


Size A B C D E F G No. Diam. Size A B C D Open E F G No. Diam.
2 7 6 4-3/4 10-3/16 1/2 7-2/32 4 x 3/4 2 7 6 4-3/4 11-1/2 1/2 7-1/16 4 x 3/4
2-1/2 7-1/2 7 5-1/2 11-3/16 9/16 7-3/32 4 x 3/4 2-1/2 7-1/2 7 5-1/2 14-3/4 9/16 7-1/16 4 x 3/4
3 8 7-1/2 6 13-1/16 5/8 7-7/8 4 x 3/4 3 8 7-1/2 6 16-1/16 5/8 7-7/8 4 x 3/4
3-1/2 8-1/2 8-1/2 7 13-1/2 11/16 8-13/16 8 x 3/4 3-1/2 8-1/2 8-1/2 7 19-3/8 11/16 8-13/16 8 x 3/4
4 9 9 7-1/2 15-5/8 11/16 8-13/16 8 x 3/4 4 9 9 7-1/2 20-1/8 11/16 8-13/16 8 x 3/4
5 10 10 8-1/2 16-1/2 3/4 11 8 x 7/8 5 10 10 8-1/2 24-1/8 3/4 9-27/32 8 x 7/8
6 10-1/2 11 9-1/2 20-1/2 13/16 11 8 x 7/8 6 10-1/2 11 9-1/2 28-7/16 13/16 14 8 x 7/8
8 11-1/2 13-1/2 11-3/4 22-5/16 15/16 12-13/32 8 x 7/8 8 11-1/2 13-1/2 11-3/4 35-5/8 15/16 12-13/32 8 x 7/8
10 13 16 14-1/4 29-9/32 1 14 12 x 1 10 13 16 14-1/4 44-13/16 1 14 12 x 1
12 14 19 17 33-1/4 1-1/16 15-3/4 12 x 1 12 14 19 17 52-5/8 1-1/16 15-3/4 12 x 1

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0301-03 4/30/06 9:21 PM Page 1

309-06

WILLIAM E. WILLIAMS VALVE CORP.


150 Lb. Flanged Bronze Globe & Angle Valves 150 Lb. Flanged Bronze
Bolted Bonnet – Outside Screw & Yoke Swing Check Valve
Rising Handwheel • Rising Stem • Renewal Seat Ring with Guide Renewable Seat Ring • Bolted Cover
Swivel Disc with Bottom Guide • Integral Backseat Optional Lever & Weight or Spring
Stop Check Feature (Optional) End Plugs on Both Sides
Fig. B15G (Globe) – Fig. B15G-SC (Globe Stop Check)
Fig. B15A (Angle) – Fib. B15A-SC (Angle Stop Check) Fig. B15SW
No. Part Material No. Part Material
1 Body ASTM B62 1 Body ASTM B62
2 Seat Ring ASTM B62 2 Cover ASTM B62
3 Disc ASTM B62 3 Hinge Arm ASTM B62
4 Disc Nut ASTM B124 4 Disc ASTM B62
5 Gasket Non-asbestos 5 Seat Ring ASTM B62
6 Packing Non-Asbestos 6 Gasket Non-Asbestos
7 Gland Flange ASTM B62 7 Cotter Pin Brass
8 Gland Stud ASTM B16 8 Disc Nut ASTM B16
9 Gland Nut ASTM B16 9 Cover Nut ASTM B16
10 Stem ASTM B124 10 Cover Stud ASTM B16
11 Bonnet ASTM B62 11 Hinge Pin ASTM B36
12 Bonnet Stud ASTM B16 12 Side Plug ASTM B16
13 Bonnet Nut ASTM B16
14 Handwheel ASTM A197 OR 216 WCB
15 Handwheel Nut ASTM B16
16 Washer Brass

Applicable Standards
ANSI B16.2
MSS-SP-6
MSS-SP-9
MSS-SP-25
MSS-SP-82

Tests
Shell – 350 PSIG Hydrostatic
Seat – 225 PSIG Hydrostatic

Fig. B15G / Fig. B15A (Dimensions in Inches) Fig. B15SW (Dimensions in Inches)
Globe Angle
Size A L B C D Open D Open G
1-1/2 6-1/2 – 5 3-7/8 9-1/4 – Size A B C D E No. x Diam.
2 7 4 6 4-3/4 10-15/16 9-1/2 1-1/2 6-1/2 5 3-7/8 4-13/16 7/16 4 x 5/8
2-1/2 8-1/2 4-1/8 7 5-1/2 11-7/16 10-3/8 2 8 6 4-3/4 5-1/4 1/2 4 x 3/4
3 9-1/8 4-5/8 7-1/2 6 15-7/16 11-1/8 2-1/2 8-1/2 7 5-1/2 5-3/4 9/16 4 x 3/4
4 12 5-5/8 9 7-1/2 14 12-1/4 3 9-1/2 7-1/2 6 6-3/16 5/8 4 x 3/4
5 14 – 10 8-1/2 16-1/4 – 4 11-1/2 9 7-1/2 7 11/16 8 x 3/4
6 16-5/8 7-3/8 11 9-1/2 18 15-3/4 5 13 10 8-1/2 7-13/16 3/4 8 x 7/8
8 19-1/2 9-3/4 13-1/2 11-3/4 21-1/4 19 6 13 11 9-1/2 8-1/4 13/16 8 x 7/8
8 19-1/2 13-1/2 11-3/4 10-3/16 15/16 8 x 7/8
Size E F Globe F Angle G No. x Diam. 10 24-1/2 16 14-1/4 12-1/16 1 12 x 1
1-1/2 7/16 7-1/16 – 4 x 5/8 12 27-1/2 19 17 12-1/2 1-1/16 12 x 1
2 1/2 7-1/16 7-7/8 4 x 3/4
2-1/2 9/16 7-7/8 7-7/8 4 x 3/4
3 5/8 8-13/16 8-13/16 4 x 3/4
4 11/16 11 11 8 x 3/4
5 3/4 12-13/32 – 8 x 7/8
6 13/16 14 14 8 x 7/8
8 15/16 13-1/2 15-3/4 8 x 7/8

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0302-03 4/30/06 9:22 PM Page 1

310-06

WILLIAM E. WILLIAMS VALVE CORP.


150 Lb. Bronze Gate Valves 150 Lb. Bronze Globe Valves
Flanged – Union Bonnet Flanged – Union Bonnet
Fig. 111F Fig. 1160F – Fig. 1160F-SC (Stop Check)
Rising Stem – Inside Screw Rising Handwheel – Inside Screw
Solid Wedge • Integral Seats • Integral Backseat Integral Seat • Integral Backseat • Swivel Disc
Stop-Check Design (Optional)

No. Part Material No. Part Material


1 Body ASTM B62 1 Body ASTM B62
2 Bonnet ASTM B62 2 Disc ASTM B62
3 Union Nut ASTM B62 3 Disc Nut ASTM B124
4 Wedge ASTM B62 4 Union Nut ASTM B62
5 Stem ASTM B124 or B62 5 Bonnet ASTM B62
6 Packing Non-Asbestos 6 Stem ASTM B124 or B62
7 Gland ASTM B124 7 Packing Non-Asbestos
8 Packing Nut ASTM B62 8 Gland ASTM B124
9 Handwheel ASTM A126 GR B 9 Packing Nut ASTM B124
10 Handwheel Nut ASTM B16 10 Handwheel ASTM A126 GR B
11 Washer ASTM B16 11 Washer Brass
12 Handwheel Nut ASTM B16

Applicable Standards
ANSI B16.24
MSS-SP-6
MSS-SP-9
MSS-SP-25
MSS-SP-82

Tests
Shell – 350 PSIG Hydrostatic
Seat – 225 PSIG Hydrostatic

Fig. 1160 (Dimensions in Inches)


Size A L B C D Globe
Open D Angle
Open
1/2 3-11/32 2-3/16 3-1/2 2-3/8 4-3/8 4-1/16
3/4 3-3/4 2-7/16 3-7/8 2-3/4 4-7/8 4-15/16
1 4-5/32 2-11/16 4-1/4 3-1/8 5-5/16 5-5/16
1-1/4 4-9/16 2-15/16 4-5/8 3-1/2 6-3/4 6-1/8
1-1/2 5-5/16 3-3/16 5 3-7/8 7-3/16 7-15/16
Fig. 111 (Dimensions in Inches) 2 6 2 6 4-3/4 8-3/16 8-3/4
Size A B C D Open E F G No. Diam. 2-1/2 6-3/4 4-1/8 7 5-1/2 9-1/8 9-1/2
1/2 3-5/32 3-1/2 2-3/8 6-3/16 5/16 2-1/4 4 x 5/8 3 7-15/16 4-5/8 7-1/2 6 10-13/16 10-7/16
3/4 3-17/32 3-7/8 2-3/4 7-5/16 11/32 2-5/8 4 x 5/8
Size E F Globe F Angle G No. Diam.
1 4-1/4 4-1/4 3-1/8 7-11/16 3/8 3-1/16 4 x 5/8
1/2 5/16 2-3/8 2-1/2 4 x 5/8
1-1/4 4-1/2 4-5/8 3-1/2 9-1/2 13/32 3-1/4 4 x 5/8 3/4 11/32 2-5/8 3-1/16 4 x 5/8
1-1/2 4-11/16 5 3-7/8 10-7/16 7/16 4 4 x 5/8 1 3/8 3-1/16 2-7/8 4 x 5/8
2 5-1/2 6 4-3/4 12-11/16 1/2 4 4 x 3/4 1-1/4 13/32 3-1/4 3-1/8 4 x 5/8
2-1/2 6-1/2 7 5-1/2 15-1/4 9/16 4-3/4 4 x 3/4 1-1/2 7/16 4 3-1/4 4 x 5/8
3 7-1/2 7-1/2 6 18-1/2 5/8 6-1/2 4 x 3/4 2 1/2 4 4-1/2 4 x 3/4
4 9 9 7-1/2 – 11/16 – 8 x 3/4 2-1/2 9/16 4-3/4 5-1/4 4 x 3/4
3 5/8 6-1/2 7-1/16 4 x 3/4

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0303-03 4/30/06 9:23 PM Page 1

311-06

WILLIAM E. WILLIAMS VALVE CORP.


150 Lb. Bronze Hose End Globe & Angle Valves
Rising Stem, Bolted Bonnet OS&Y • Rising Handwheel • Integral Seat • Integral Backseat
Fig. 115F (Globe) National Standard Hose Thread x Mfr’s. Std. Connection • Cap & Chain
Fig. 215F (Angle)

Applicable Standards No. Part Material


ANSI B16.24 1 Body ASTM B62
2 Chain Brass
MSS-SP-6 3 Cap ASTM B62
MSS-SP-9 4 Cap Gasket Rubber
5 Disc ASTM B62
MSS-SP-25 6 Disc Nut ASTM B62
MSS-SP-82 7 Stem ASTM B124 or B62
8 Packing Non-Asbestos
9 Bonnet Gasket Non-Asbestos
Tests 10 Bonnet ASTM B62
11 Bonnet Nut Brass
Shell – 350 PSIG Hydrostatic 12 Bonnet Stud Brass
Seat – 225 PSIG Hydrostatic 13 Gland Flange ASTM B62
14 Gland Flange Nut Brass
15 Gland Flange Stud Brass
16 Handwheel Aluminum
17 I.D. Tag Aluminum
18 Handwheel Nut Brass

Fig. 115 / Fig. 215 (Dimensions in Inches)


Size A B C D (Globe Open) D (Angle Open) E F G L L1
1-1/2 6-5/8 5 3-7/8 7-3/8 6-5/8 7/16 5-1/2 4 x 5/8 3-15/16 3-1/4
2-1/2 9-5/8 7 5-1/2 13-1/32 11-3/4 5/8 7-1/2 4 x 3/4 4-5/8 4-3/4

Emergency Shut-Off Valve (for Spillage Situations)


Can be operated at the valve or from a remote position.
Fig. PL-1 Material: Cast Steel
Fusible Link & Weight Diam. Face-to-Face
Pressure: 150 lb. 2” 8”
Releases: 2-1/2” 8-1/2”
• Electrical 3” 9-1/2”
• Fusible link 4” 11-1/2”
Fig. AP-1 • Lanyard or cable operated 6” 14”
Solenoid • Air operated 8” 19-1/2”
Operated • Hydraulic 10” 24-1/2”
• Hand lever 12” 27-1/2”
Can also be used with combinations 14” 31”
of the above
Fig. PSL-1
Fusible Link FLEXIBILITY: When electrical operation is desired, valve is furnished with a heavy-duty
& Spring explosionproof solenoid which can be controlled either by pushbutton or by other electrical
alternatives such as fire detectors or limit switches. In addition, it can be supplied to close
upon electrical failure. For air operation, valve is furnished with an air cylinder with plunger
which holds the valve open. Valve can be closed by application of air pressure or failure of
Fig. No. Description air pressure.
P-1 Regular valve (lever & wt.) MANUALLY: The valve can be closed at the valve by pulling a lever, and by attaching a
PL-1 Regular valve w/link cable to this lever the valve can be closed at a distance.
PS-1 Regular valve w/spring BY FIRE: A fusible link placed at the valve, or on a cable at the point fire is most suspect,
PSL-1 Regular valve w/spring and link burns out closing valve instantly.
AP-1 Valve w/solenoid CLOSURE: Assisted by weight or by a spring, or both.
APL-1 Valve w/solenoid and link FEATURES: Valve body is drilled and tapped for bypass. Valves can be furnished with
APS-1 Valve w/solenoid and spring teflon or viton rings for more positive and quieter closure. Low center of valve to top is an
APSL-1 Valve w/solenoid, spring and link advantage in cramped quarters.
CP-1 Valve w/air cylinder Valve can be provided with limit switch to provide remote indicators or to control other
CPL-1 Valve w/air cylinder and link equipment such as pumps. Wiring is inexpensive due to low voltage required.
CPS-1 Valve w/air cylinder and spring No restriction in flow when open.
CPSL-1 Valve w/air cylinder, spring and link In all cases, valve must be reset by hand as an added safety factor.

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0304-03 4/30/06 9:23 PM Page 1

312-06

WILLIAM E. WILLIAMS VALVE CORP.


150 lb. Cast Steel Gate Valves - Rising Stem Part Material
Body ASTM A216 GR WCB
Rising stem – OS&Y, Bolted Bonnet • Solid wedge (Plain or flexible) Bonnet ASTM A216 GR WCB
Renewable seat rings (Threaded or welded) Wedge See Trim Chart*
Back seat bushing allows repacking under pressure Seat Ring See Trim Chart*
Bosses for taps, drains, bypass • Ground wedges, fully guided Gland Flange ASTM A105
Applicable Standards: Packing Gland Steel Chrome Plated
Stem See Trim Chart*
Fig. 15F (Flanged) Steel Gate Valves, API 600 (1-1/2” - 24”)
Stem Nut ASTM A439 GR D2C
ABS Type Approved Steel Valves, ANSI B16.34, Std. CL.
Fig. 15W (Buttweld) Face-to-Face, End-to-End, ANSI B16.10
or Aluminum Bronze
End Flanges, ANSI B16.5
Backseat Bushing ASTM A182 GR F6
Yoke Nut ASTM 447 GR 32510
Face End Center Dia. End Flanges (30” & 36”), MSS-SP-44
to to to Top Hand- Weld Ends, ANSI B16.25
Handwheel Nut ASTM A47 GR 32510
Sizes Face End (BW) Open Wheel Bonnet Nut ASTM A 194 GR2H
in. in. in. in. in. Tests: Bonnet Stud ASTM A 193 GRB7
1-1/2 6-1/2 – 13 7 API 598 Handwheel ASTM A 197 or
2 7 8-1/2 14-1/2 8 Shell: 450 PSIG Hydrostatic ASTM A216 GR WCB
2-1/2 7-1/2 9-1/2 17 8 Seat: 315 PSIG Hydrostatic
3 8 11-1/8 18 8-7/8 Eyebolt ASTM A307 GR B
80 PSIG Air
3-1/2 8-1/2 – 18-7/8 8-7/8 Eye ASTM A307 GR B
4 9 12 22 11 Max. Allowable Non-Shock
Eyebolt Pin Steel
5 10 15 26 12-3/4 Working Pressure Packing Non-Asbestos
6 10-1/2 15-7/8 30 14 Temp. in Degrees F PSIG Gasket Soft Iron
8 11-1/2 16-1/2 38-1/2 14 -20 to 100 285 Set Screw Steel
10 13 18 46 18 200 260 Grease Nipple Steel
12 14 19-3/4 55-1/4 20 300 230
14 15 22-1/2 60 21-1/2 400 200
16 16 24 74-7/8 24 500 170
18 17 26 79 27 600 140
20 18 28 87-1/2 28 Trim
700 110 Fig. No. Seating Stem
24 20 32 105 31-1/2 800 80
30 24 38 130 43 Suffix Surfaces Material
900 50 1 13% CR 13% CR
36 28 44 162 51 1000 20
2 13% CR/Hardface 13% CR
3 Hardface 13% CR
4 Bronze Brass
300 lb. Cast Steel Gate Valves - Rising Stem 5 Monel Monel
6 316 SS 316 SS
Rising stem – OS&Y, Bolted Bonnet • Solid wedge (Plain or flexible) 7 TFE Seat -NA-
Renewable seat rings (Threaded or welded) 8 13% CR/Monel 13% CR
Back seat bushings allows repacking under pressure
Bosses for taps, drains, bypass • Ground wedges, fully guided

Fig. 30F (Flanged) Applicable Standards: Part Material


Steel Gate Valves, API 600 (2” - 24”) Body ASTM A216 GR WCB
Fig. 30W (Buttweld) Steel Valves, ANSI B16.34, Std. CL. Bonnet ASTM A216 GR WCB
Face-to-Face, End-to-End, ANSI B16.10 Wedge See Trim Chart*
Face Center Dia.
to to Top Hand- End Flanges, ANSI B16.5 Seat Ring See Trim Chart*
Sizes Face Open Wheel End Flanges (30” & 36”), MSS-SP-44 Gland Flange ASTM A105
in. in. in. in. Weld Ends, ANSI B16.25 Packing Gland Steel Chrome Plated
2 8-1/2 16 7-7/8 Stem See Trim Chart*
Tests:
2-1/2 9-1/2 17-3/8 7-7/8 Stem Nut ASTM A439 GR D2C
API 598
or Aluminum Bronze
3 11-1/8 19-3/4 8-7/8 Shell: 815 PSIG Hydrostatic
Backseat Bushing ASTM A182 GR F6
4 12 23-3/8 9-7/8 Seat: 1125 PSIG Hydrostatic
80 PSIG Air Yoke Nut ASTM A47 GR 32510
5 15 27-3/4 12-1/2 Handwheel Nut ASTM A47 GR 32510
6 15-7/8 32-1/8 14 Max. Allowable Non-Shock Bonnet Nut ASTM A 194 GR2H
8 16-1/2 41 15-3/4 Working Pressure Bonnet Stud ASTM A 193 GRB7
10 18 48-3/8 17-3/4 Temp. in Degrees F PSIG Handwheel ASTM A197 or
-20 to 100 740 ASTM A216 GR WCB
12 19-3/4 57 20 200 675
14 30 62-1/2 22 Eyebolt ASTM A307 GR B
300 655
16 33 69 25 400 635 Eye ASTM A307 GR B
500 600 Eyebolt Pin Steel
18 36 80-1/2 28
600 550 Packing Non-Asbestos
20 39 91 35-1/2 700 535 Gasket Soft Iron
24 45 120-1/2 43 800 410 Set Screw Steel
30 55 143 51 900 170 Grease Nipple Steel
36 68 163 63 1000 50

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
307 4/30/06 9:24 PM Page 1

313-06

WILLIAM E. WILLIAMS VALVE CORP.


Cast Steel Gate Valves – 600 lb.
Rising Stem – OS&Y, Bolted Bonnet
Solid Wedge (Plain or flexible) • Ground wedges, fully guided Part Material
Renewable seat rings (Threaded or welded) Body ASTM A216 GR WCB
Bonnet ASTM A216 GR WCB
Back seat bushing allows repacking under pressure Wedge See Trim Chart*
Bosses for taps, drains, bypass Seat Ring See Trim Chart*
Gland Flange ASTM A105
ABS Type Approved 600 lb. Applicable Standards: Packing Gland Steel Chrome Plated
Steel Gate Valves, API 600 (2” - 24”)
Fig. 60F (Flanged) Steel Valves, ANSI B16.34, Std. CL.
Stem See Trim Chart*
Stem Nut ASTM A439 GR D2C
Fig. 60W (Buttweld) Face-to-Face, End-to-End, ANSI B16.10
or Alminum Bronze
End Flanges, ANSI B16.5
End Flanges (30” & 36”), MSS-SP-44 Backseat Bushing ASTM A182 GR F6
Face Center Dia.
to to Top Hand- Weld Ends, ANSI B16.25 Yoke Nut ASTM A47 GR 32510
Sizes Face Open Wheel Tests: Handwheel Nut ASTM A47 GR 32510
in. in. in. in. API 598 Bonnet Nut ASTM A194 GR2H
2 11-1/2 16-1/2 7-7/8 Shell: 2250 PSIG Hydrostatic Bonnet Stud ASTM A193 GRB7
2-1/2 13 18 8-7/8 Seat: 1630 PSIG Hydrostatic Handwheel ASTM A197 or
80 PSIG Air ASTM A216 GR WCB
3 14 20-1/8 9-7/8
4 17 25 14 Eyebolt ASTM A307 GR B
Max. Allowable Non-Shock Eye ASTM A307 GR B
5 20 30-1/2 15-3/4 Working Pressure
6 22 33-5/8 17-3/4 Eyebolt Pin Steel
Temp. in Degrees F PSIG
8 26 42-3/8 20 -20 to 100 1480 Packing Non-Asbestos
10 31 49 25 200 1350 Gasket Ring Joint-Iron
12 33 68-1/2 27 300 1315 Set Screw Steel
14 35 69 31-1/2 400 1270 Grease Nipple Steel
16 39 74 35-1/2 500 1200 Bearings Steel
18 43 84-1/4 43 600 1095
700 1965
20 47 93-1/2 51 800 825 Trim
24 55 110 51 900 345 Fig. No. Seating Stem
30 65 140 – 1000 105 Suffix Surfaces Material
36 77 170 – 1 13% CR 13% CR
2 13% CR/Hardface 13% CR
Cast Steel Gate Valves – 900 lb. & 1500 lb. 3
4
Hardface
Bronze
13% CR
Brass
Rising Stem – OS&Y, Bolted Bonnet 5 Monel Monel
6 316 SS 316 SS
Solid Wedge (Plain or flexible) • Ground wedges, fully guided 7 TFE Seat -NA-
Renewable seat rings (Threaded or welded) 8 13% CR/Monel 13% CR
Back seat bushing allows repacking under pressure
Bosses for taps, drains, bypass Applicable Standards: Part Material
Steel Gate Valves, API 600 (2” - 24”) Body ASTM A216 GR WCB
900 Lb. Steel Valves, ANSI B16.34, Std. CL.
1500 Lb. Face-to-Face, End-to-End, ANSI B16.10
Bonnet ASTM A216 GR WCB
Fig. 90F (Flanged) Fig. 150F (Flanged) End Flanges, ANSI B16.5 Wedge See Trim Chart*
Weld Ends, ANSI B16.25 Seat Ring See Trim Chart*
Fig. 90W (Buttweld) Fig. 150W (Buttweld) Gland Flange ASTM A105
Tests:
API 598 Packing Gland ASTM A182 GR F6
Face Center Dia. Face Center Dia. Class 900 Class 1500 Stem See Trim Chart*
to to Top Hand- Shell: 3350 PSIG 5575 PSIG (Hydrostatic) Stem Nut ASTM B148 GR 9D
to to Top Hand- Seat: 2450 PSIG 4080 PSIG (Hydrostatic)
Sizes Face Open Wheel Sizes Face Open Wheel Backseat Bushing ASTM A182 GR F6
in. in. in. in. 80 PSIG 80 PSIG (Air)
in. in. in. in. Yoke Nut Carbon Steel
3 15 26-3/8 11-1/2 2 14-1/2 21-1/2 11-1/2 Handwheel Nut Carbon Steel
4 18 30 14 3 18-1/2 27-1/8 14 Max. Allowable Non-Shock Bonnet Nut ASTM A194 GR2H
4 21-1/2 31-1/2 20 Working Pressure in PSIG
6 24 40-3/8 20 Bonnet Stud ASTM A193 GRB7
6 27-3/4 45 24 Temp. in Degrees F 900 lb. 1500 lb.
8 29 51 24 -20 to 100 2250 3705 Handwheel Carbon Steel or
10 33 61 27 8 32-3/4 53-1/2 27 200 2025 3375 Nodular Iron
12 38 69-1/2 31-1/2 10 39 65 35-1/2 300 1970 3280 Gland Eye Bolt ASTM A307 GR B
14 40-1/2 77 35-1/2 12 44-1/2 74 43 400 1900 3170 Gland Eye Bolt Nut ASTM A307 GR B
16 44-1/2 82-3/4 43 14 39-1/2 83-1/2 51 500 1795 2995 Packing Non-Asbestos
16 54-1/2 88 63 600 1640 2735 Gasket Armco Iron
700 1600 2665 Set Screw Steel
Note: Permissible, but not recommended, for 800 1235 2060
prolonged usage above approximately 800°F.
Grease Nipple Steel
900 515 860
1000 155 260 Bearings Steel

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0306-03 4/30/06 9:25 PM Page 1

314-06

WILLIAM E. WILLIAMS VALVE CORP.


150 lb. Cast Steel Gate Valves Face Center Dia.
to to Hand-
Part Material
Body ASTM A216 GR WCB
Non-Rising Stem Sizes Face Top Wheel Wedge See Trim Chart*
in. in. in. in. Seat Ring See Trim Chart*
2 7 12-3/4 7
Fig. N15F (Flanged) ABS Type Approved 2-1/2 7-1/2 13-1/2 7
Bonnet ASTM A216 GR WCB
Stem See Trim Chart*
Fig. N15W (Buttweld) 3 8 15 7-7/8 Packer Box ASTM A216 GR WCB
4 9 17-3/4 8-7/8 Gland Flange ASTM A216 GR WCB
• Non-Rising Stem-NRS 6 10-1/2 23 12-1/2 Handwheel Carbon Steel or
8 11-1/2 27 12-1/2
• Solid wedge 10 13 31-5/8 14
Nodular Iron
Washer Carbon Steel
renewable seat rings 12 14 35-5/8 15-3/4 Handwheel Nut Carbon Steel
• Bosses for drains 14 15 41 17-3/4 Gland Bolt Brass
16 16 43-3/8 19-5/8 Packer Box Bolt ASTM A307 GR B
or bypasses 18 17 47-1/2 22 Gland Bolt Nuts Brass
• Operating nuts available 20 18 52 24-7/8 Packer Box Bolt Brass
Nuts
Applicable Standards: Max. Allowable Non-Shock Studs ASTM A307 GR B
Steel Valves, ANSI B16.34, Std. CL. Working Pressure Nuts ASTM A194 GR 2H
Face-to-Face, End-to-End, ANSI B16.10 Temp. in Degrees F PSIG Gasket Soft Iron
End Flanges, ANSI B16.5 -20 to 100 285 Bearing Bronze
200 260
Weld Ends, ANSI B16.25 Packing Non-Asbestos
300 230
Tests: 400 200 Gland Brass
API 598 500 170 Wedge Nut Bronze
Shell: 450 PSIG Hydrostatic 600 140
Seat: 315 PSIG Hydrostatic 700 110
80 PSIG Air 800 80
900 50
1000 20 Trim
Fig. No. Seating Stem
Note: Permissable, but not recommended, for Suffix Surfaces Material
prolonged usage above approximately 800°F. 1 13% CR 13% CR
2 13% CR/Hardface 13% CR
3 Hardface 13% CR
4 Bronze Brass
300 lb. Cast Steel Gate Valves Face Center 5 Monel Monel
to to 6 316 SS 316 SS
Non-Rising Stem Sizes Face Top 7 TFE Seat -NA-
in. in. in. 8 13% CR/Monel 13% CR
Fig. N30F (Flanged) 2 8-1/2 13
3 11-1/8 14-3/4
Fig. N30W (Buttweld) 3-1/2 - 4 12 171/4
6 15-7/8 21-1/4
• Non-Rising Stem-NRS 8 16-1/2 26-1/2
10 18 32 Part Material
• Solid wedge 12 19-3/4 36 Body ASTM A216 GR WCB
• Square operating nuts 14 30 42 Bonnet ASTM A216 GR WCB
16 33 46 Wedge See Trim Chart*
• Handwheels available 18 36 51 Stem See Trim Chart*
if required 20 39 53 Gland Follower ASTM B62
Bushing ASTM A182 GR F6
Thrush Washer ASTM A124
Applicable Standards: Max. Allowable Non-Shock Gland Flange ASTM B 148 GR 955
Steel Valves, ANSI B16.34, Std. CL. Working Pressure Packing Teflon Chevron
Face-to-Face, End-to-End, ANSI B16.10 Temp. in Degrees F PSIG Gland Bolts ASTM B124
End Flanges, ANSI B16.5 -20 to 100 740
200 675 Gland Nuts ASTM B124
Weld Ends, ANSI B16.25
300 655 Square Nut Malleable Cast Iron
Tests: 400 635 Washer Steel
API 598 500 600 Nut ASTM A 194 GR 2H
Shell: 815 PSIG Hydrostatic 600 550
700 535 Nuts ASTM A 194 GR 2H
Seat: 1125 PSIG Hydrostatic 800 410 Stem Bushing Stem ASTM B148 GR 955
80 PSIG Air 900 170 Gasket Soft Iron
1000 50
Studs ASTM A193 GR B7
Nuts ASTM A19 GR 2H
Note: Permissable, but not recommended, for
prolonged usage above approximately 800°F.
Bushing ASTM B62

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0307-03 4/30/06 9:25 PM Page 1

315-06

WILLIAM E. WILLIAMS VALVE CORP.


Fig. 152 / Fig. 153
Cast Steel Globe & Angle Valves– 150 lb. & 300 lb. ABS Type
Approved Face Center Center Dia.
Rising Handwheel – OS&Y, Bolted Bonnet to to to Top Hand-
Bossed for Bypass • Renewable Seat Rings (Threaded or Welded) Sizes Face Face Open Wheel
in. in. (angles) in. in. in.
Stop-Check Design Optional - Back Seat Bushing Allows Repacking Under Pressure 2 8 4 13-3/8 8-7/8
2-1/2 8-1/2 4-1/4 14-1/2 8-7/8
150 Lb. Globe 300 Lb. Globe Part Material
3 9-1/2 4-3/4 16-1/2 11-7/8
Fig. 152F (Flanged) Fig. 302F (Flanged) Body ASTM A216 GR WCB
3-1/2 10-1/2 5-1/4 17-3/8 11-7/8
Bonnet ASTM A216 GR WCB
Fig. 152W (Buttweld) Fig. 302W (Buttweld) Disc See Trim Chart*
4 11-1/2 5-3/4 19 12-3/4
5 14 7 24 12-3/4
150 Lb. Angle 300 Lb. Angle Stem See Trim Chart*
6 16 8 24 17-3/4
Handwheel ASTM A197
Fig. 153F (Flanged) Fig. 303F (Flanged) 8 19-1/2 9-3/4 26-3/4 21-5/8
Seat Ring See Trim Chart*
Fig. 153W (Buttweld) Fig. 303W (Buttweld) Backseat Bushing ASTM A479-410
10 24-1/2 12-1/4 30 30
12 27-1/2 13-3/4 33-7/8 30
Packing Gland Steel Chrome Plated
14 31 15-1/2 56 31-1/2
Gland Flange ASTM A105 16 36 18 64 35-1/2
Yoke Bushing ASTM A439 GR D2C
or Aluminum Bronze (Dimensions in Inches)
Bonnet Bolt ASTM A193 GRB7
Fig. 302 / Fig. 303
Bonnet Nut ASTM A194 GR 2h
Hinge Bolt ASTM A 307 GR B Face Center Center Dia.
Hinge Nut ASTM A 307 GR B to to to Top Hand-
Hinge Pin Steel Chrome Plated Sizes Face Face Open Wheel
in. in. (angles) in. in. in.
Lock Nut ASTM A479-410
2 10-1/2 5-1/4 13-3/8 9
Washer Steel
2-1/2 11-1/2 5-3/4 15-3/8 9
Handle Nut ASTM A 307 GR B
3 12-1/2 6-1/4 16-1/2 13
Packing Non Asbestos
4 14 7 19-3/8 14
Gasket Soft Iron
5 15-3/4 7-7/8 21-1/2 15-3/4
Max. Allowable Non-Shock 6 17-1/2 8-3/4 24-3/8 17-3/4
Working Pressure in PSIG 8 22 11 31-1/4 22
Temp. in Degrees F 150 lb. 300 lb. 10 24-1/2 12-1/4 * *
-20 to 100 285 740
200 260 675
12 28 14 * *
300 230 655 14 31 15-1/2 * *
400 200 635 16 34 17 * *
Applicable Standards: Tests: API 598 500 170 600
Steel Valves, ANSI B16.34, Std. CL. 150 Lb. 300 Lb. 600 140 550 Trim
Face-to-Face, End-to-End, ANSI B16.10 Shell: 450 1125 PSIG Hydrostatic 700 110 535 Fig. No. Seating Stem
Seat: 315 815 PSIG Hydrostatic 800 80 410 Suffix Surfaces Material
End Flanges, ANSI B16.5
80 80 PSIG Air 900 50 170 1 13% CR 13% CR
Weld Ends, ANSI B16.25 1000 20 50
2 13% CR/Hardface 13% CR
3 Hardface 13% CR
Cast Steel Globe Valves 4 Bronze Brass
Rising Handwheel – OS&Y, Bolted Bonnet 5 Monel Monel
6 316 SS 316 SS
Renewable Seat Rings (Threaded or Welded) • Bossed for Bypass 7 TFE Seat -NA-
Stop Check Design Optional • Back Seat Bushing Allows Repacking Under Pressure 8 13% CR/Monel 13% CR
Part Material Fig. 902
600 Lb. 900 Lb. 1500 Lb. Body ASTM A216 GR WCB Max. Allowable Non-Shock
Face Center Dia.
Fig. 602F Fig. 902F Fig. 1502F Bonnet ASTM A216 GR WCB to to Top Hand- Working Pressure in PSIG
Fig. 602W Fig. 902W Disc See Trim Chart* Sizes Face Open Wheel Temp. in
Fig. 1502W in. in. in. in.
Stem See Trim Chart* Degrees F 600 lb. 900 lb. 1500 lb.
Handwheel ASTM A197 3 15 22-3/4 14 -20 to 100 1480 2220 3705
Fig. 602 Seat Ring See Trim Chart* 4 18 26-1/2 21-1/2 200 1350 2025 3375
Face Center Dia. Backseat Bushing ASTM A479-410 6 24 36 20 300 1315 1970 3280
to to Top Hand- Packing Gland Steel Chrome Plated Fig. 1502 400 1270 1900 3170
Sizes Face Open Wheel Gland Flange ASTM A105 Face Center Dia. 500 1200 1795 2995
in. in. in. in. Yoke Bushing ASTM A439 GR D2C to to Top Hand- 600 1095 1640 2735
2 11-1/2 15-1/2 9-1/2 or Aluminum Bronze Sizes Face Open Wheel 700 1965 1600 2665
2-1/2 13 17 11 Bonnet Bolt ASTM A193 GRB7 in. in. in. in. 800 825 1235 2060
3 14 19 13 Bonnet Nut ASTM A194 GR 2H 2 14-1/2 24 11-1/2 900 345 515 860
4 17 21 14 Hinge Bolt ASTM A 307 GR B 3 18-1/2 26 18 1000 105 155 260
5 20 25 15-3/4 Hinge Nut ASTM A 307 GR B 4 21-1/2 28 26
6 22 26-1/2 20 Hinge Pin Steel Chrome Plated 6 27-3/4 37-1/2 20
8 26 * * Lock Nut ASTM A479-410
10 31 * * Tests: API 598
Washer Steel 600 Lb. 900 Lb. 1500 Lb.
12 33 * * Handle Nut ASTM A 307 GR B Shell: 2250 3350 5575 PSIG Hydrostatic
Packing Non Asbestos Seat: 1630 2450 4080 PSIG Hydrostatic
(Dimensions in Inches) Gasket Ring Joint-Iron 80 80 80 PSIG Air

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0308-03 4/30/06 9:26 PM Page 1

316-06

WILLIAM E. WILLIAMS VALVE CORP.


Cast Steel Swing Check Valves
Renewable Seat Rings (Threaded or Welded) • Bosses for Bypass Part Material
Body ASTM A216 GR WCB
Bolted Cover • Optional Lever and Weight or Spring Cover ASTM A216 GR WCB
ABS Type Approved Disc See Trim Chart*
Fig. 151 Fig. 301 Seat Ring See Trim Chart*
Face Face Hanger ASTN A216 GR WCB
to Center to Center
150 Lb. Face to Top Face to Top Disc Nut ASTM A307 GR B
Fig. 151F Sizes in. in. Sizes in. in. Washer Steel
2 8 5-1/2 2 10-1/2 6-3/8 Split Pin ASTM A580 GR 304
(Flanged) 2-1/2 8-1/2 6-1/4 2-1/2 11-1/2 7-1/2
3 9-1/2 6-7/8 3 12-1/2 7-7/8 Cover Stud ASTM A193 GRB7
Fig. 151W 4 11-1/2 8-1/8 4 14 9 Cover Nut ASTM A194 GR2H
(Buttweld) 5 13 9 6 17-1/2 11 Hinge Pin ASTM A479 410
6 14 9-7/8 8 21 12-5/8 Gasket Soft Iron
8 19-1/2 11-5/8 10 24-1/2 15
10 24-1/2 13 12 28 17-1/8 Side Plug ASTM A307 GR B
12 27-1/2 14-7/8 14 33 20
14 31 15-7/8 Max. Allowable Non-Shock
16 34 20-1/2 Working Pressure in PSIG
16 34 18-1/4 18 38-1/2 22-1/2
18 38-1/2 22 Temp. in Degrees F 150 lb. 300 lb.
20 40 25
20 38-1/2 24 -20 to 100 285 740
24 53 29 200 260 675
24 51 28-1/2 300 230 655
300 Lb. 30 60 32 400 200 635
36 77 34 500 170 600
Fig. 301F Applicable Standards
600 140 550
700 110 535
(Flanged) Steel Valves, ANSI B16.34, Std. CL. 800 80 410
Face-to-Face, End-to-End, ANSI B16.10 900 50 170
Fig. 301W End Flanges, ANSI B16.5 1000 20 50
(Buttweld) End Flanges (30” & 36”), MSS-SP-44
Weld Ends, ANSI B16.25 Trim
Fig. No. Seating Stem
Tests API 598 Suffix Surfaces Material
150 Lb. 300 Lb. 1 13% CR 13% CR
Shell: 450 PSIG 1125 PSIG Hydrostatic 2 13% CR/Hardface 13% CR
Seat: 315 PSIG 815 PSIG Hydrostatic 3 Hardface 13% CR
80 PSIG 80 PSIG Air 4 Bronze Brass
5 Monel Monel
6 316 SS 316 SS
600 Lb. Fig. 601 Fig. 901 7 TFE Seat -NA-
8 13% CR/Monel 13% CR
Fig. 601F Face
to Center
Face
to Center
(Flanged) Sizes Face to Top Sizes Face to Top Part Material
in. in. in. in. in. in. Body ASTM A216 GR WCB
Fig. 601W 2 11-1/2 7-3/8 3 15 9-1/4 Cover ASTM A216 GR WCB
2-1/2 13 7-7/8 4 18 11
(Buttweld) 3 14 8-1/4 Disc See Trim Chart*
6 24 13-3/4
4 17 10-1/4 Seat Ring See Trim Chart*
6 22 13 Fig. 1501 Hanger ASTM A216 GR WCB
8 26 17 Disc Nut ASTM A307 GR B
10 31 19 Face Washer Steel
12 33 20 to Center Split Pin ASTM A580 GR 304
14 35 22-1/2 Sizes Face to Top
in. in. in. Cover Stud ASTM A193 GR B7
16 39 26
900 Lb. 18 43 28 2 14-1/2 8-3/8 Cover Nut ASTM A194 GR 2H
Fig. 901F 20 47 31 3 18-1/2 9-1/4 Hinge Pin ASTM A479 410
24 55 34 4 21-1/2 11 Gasket Ring Joint-Iron
(Flanged) 6 27-3/4 13-3/4 Side Plug ASTM A307 GR B
(Dimensions in Inches)
Fig. 901W Max. Allowable Non-Shock
Applicable Standards Working Pressure in PSIG
(Buttweld) Steel Valves, ANSI B16.34, Std. CL. Temp. in
Face-to-Face, End-to-End, ANSI B16.10 Degrees F 600 lb. 900 lb. 1500 lb.
1500 Lb. End Flanges, ANSI B16.5 -20 to 100 1480 2220 3705
End Flanges (30” & 36”), MSS-SP-44
Fig. 1501F Weld Ends, ANSI B16.25
200 1350 2025 3375
300 1315 1970 3280
(Flanged) 400 1270 1900 3170
Tests API 598 500 1200 1795 2995
Fig. 1501W 600 Lb. 900 Lb. 1500 Lb.
600 1095 1640 2735
Shell: 2250 PSIG 3350 PSIG 5575 PSIG (Hydrostatic)
(Buttweld) Seat: 1630 PSIG 2450 PSIG 4080 PSIG (Hydrostatic)
700 1965 1600 2665
800 825 1235 2060
80 PSIG 80 PSIG 80 PSIG (Air)
900 345 515 860
1000 105 155 260

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0309-03 4/30/06 9:27 PM Page 1

317-06

WILLIAM E. WILLIAMS VALVE CORP.


Cast Steel Flanged Ball Valves
Blow-Out Proof Stem • Anti-Static Grounding ABS Type Approved
10” and 12” Valves are Trunion Mounted Design
Reduced Port Full Port
150 Lb. – Fig. C16F6RT 150 Lb. – Fig. C17F6RT
300 Lb. – Fig. C36F6RT 300 Lb. – Fig. C37F6RT

Fig. C17F6RT
Face Length Part Material
to Center of Body ASTM A216 GR WCB
Sizes Face to Top Lever
in. in. in. in. Bonnet ASTM A216 GR WCB
Fig. C16F6RT 1/2 4-1/4 3 5 Ball ASTM A351 GR CF8M
Face Length Part Material 3/4 4-5/8 3-1/8 5 Yoke ASTM A216 GR WCB
to Center of Body ASTM A216 GR WCB 1 5 3-3/8 6-3/8 Stem ASTM A182 GR F316
Sizes Face to Top Lever Retainer ASTM A216 GR WCB 1-1/2 6-1/2 4-1/8 9 Lever ASTM A216 GR WCB*
in. in. in. in. 2 7 4-5/8 11 Gland Flange ASTM A216 GR WCB
Ball ASTM A351 GR CF8M
2 7 4-1/8 9 2-1/2 7-1/2 5-1/4 14
Stem ASTM A182 GR F316 Gland Ring ASTM A182 GR F316
2-1/2 7-1/2 4-3/4 11 3 8 7-3/8 16
3 8 5-1/4 14 Cover ASTM A216 GR WCB Stopper Stainless Steel
4 9 8-1/2 18
4 9 6-1/4 16 Lever Boss ASTM A351 GR CF8M Ball Seat Reinforced Teflon
6 15-1/2 12-7/8 24
6 10-1/2 7-5/8 20 Lever ASTM A120 (Pipe)* 8 18 15-3/8 30 Thrust Washer Virgin Teflon
8 11-1/2 11 24 Seat Reinforced Teflon 10 21 17-1/8 40 Bonnet Stud ASTM A193 GR B7
10 13 12-3/8 30 Gland Ring ASTM A182 GR F316 12 24 18-3/4 48 Bonnet Nut ASTM A194 GR 2H
12 14 15-1/2 36 Gland Bolt ASTM A276 GR F316 Snap Ring Steel Chrome Plated
Fig. C37F6RT
Joint Bolt ASTM A276 GR F316 Packing Teflon
Fig. C36F6RT Face Length
Washer ASTM A276 GR F316 to Center of Gasket Teflon
Face Length Washer Teflon Sizes Face to Top Lever Spring Stainless Steel
to Center of in. in. in. in.
Sizes Face to Top Lever Packing Teflon
in. in. in. in. Gasket Teflon 1/2 5-1/2 3 5 * Gear operators are recommended for sizes 8”
and larger.
2 8-1/2 4-1/8 6 Spring Stainless Steel 3/4 6 3-1/8 5
2-1/2 9-1/2 4-3/4 11 1 6-1/2 3-3/8 6
3 11-1/8 5-1/4 14 * Gear operators are recommended for sizes 8” 1-1/2 7-1/2 4-1/8 6
and larger. 2 8-1/2 4-5/8 11 Applicable Standards
4 12 6-1/4 16
6 15-7/8 7-5/8 20 2-1/2 9-1/2 5-1/4 14 Shell & Wall Thickness:
Applicable Standards 3 11-1/8 7-3/8 16
8 16-1/2 11 24 ANSI B16.34, Std. CL.
Shell & Wall Thickness: 4 12 8-1/2 18 Face-to-Face: ANSI B16.10
10 18 12-3/8 30 ANSI B16.34, Std. CL.
12 19-3/4 15-1/2 36 6 15-7/8 12-7/8 24 Flange Dimensions: ANSI B16.5
Face-to-Face: ANSI B16.10 8 19-3/4 15-3/8 30 Fire-Safe: API 607
(Dimensions in Inches) Flange Dimensions: ANSI B16.5 10 22-3/8 17-1/8 40
Fire-Safe: API 607 12 25-1/2 18-3/4 48
(Dimensions in Inches)
Tests: API 598 Tests: API 598
150 Lb. 300 Lb. 150 Lb. 300 Lb.
Shell: 450 PSIG 1125 PSIG (Hydrostatic) Shell: 450 PSIG 1125 PSIG (Hydrostatic)
Seat: 80 PSIG 80 PSIG (Air) Seat: 80 PSIG 80 PSIG (Air)

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0310-03 4/30/06 9:28 PM Page 1

318-06

WILLIAM E. WILLIAMS VALVE CORP.


Stainless Steel Ball Valves – Full Port Stainless Steel Ball Valves – Reduced Port
150 Lb. 150 Lb. – Fig. No. S16F6RT
No. S17F6RT 300 Lb. – Fig. No. S36F6RT
300 Lb.
No. S37F6RT
Applicable Standards
Shell Wall Thickness:
ANSI B16.34
Face-to-Face or End-to-End:
ANSI B16.10
Flange Dimensions:
ANSI B16.5
Fire-Safe: API 607
Tests 150 Lb. 300 Lb.
Shell: 425 psi 1125 psi
Seat: 80 psi Air 80 psi Air

Part Material
1 Body A351 GR.CF8 CF8M
2 Bonnet A351 GR.CF8 CF8M
3 Ball A351 GR.CF8 CF8M
4 Yoke A351 GR.CF8, CF8M
5 Stem A182 GR.F304, F316
6 Lever A212 GR. WCB Applicable Standards Part Material
7 Gland Flange A351 GR.CF8, CF8M Shell Wall Thickness: 1 Body ASTM A351 CF8 CF8M
8 Gland Ring A182 GR.F304, F316 2 Retainer ASTM A351 CF8 CF8M
9 Stopper A167 GR.304 ANSI B16.34
Face-to-Face or End-to End: 3 Ball ASTM A351 CF8 CF8M
10 Ball Seat Reinforced Teflon 4 Stem ASTM A182 F304 F316
11 Thrust Washer Virgin Teflon ANSI B16.10 5 Cover ASTM A351 CF8 CF8M
12 Bonnet Bolt A276 GR.304 Flange Dimensions: 6 Lever Boss ASTM A351 CF8
13 Bonnet Nut A276 GR.304 ANSI B16.5 7 Lever ASTM A120 F(Pipe)
14 Snap Ring SK5 CR. Plating 8 Seat Reinforced Teflon
15 Packing Virgin Teflon Fire-Safe: API 607
9 Gland Ring ASTM A182 F304 F316
16 Gasket Virgin Teflon or Equivalent 10 Gland Bolt ASTM A276 304
Fig. S17F6RT (Dimensions in Inches) Tests 150 Lb. 300 Lb. 11 Joint Bolt ASTM A276 304
Shell: 425 psi 1125 psi 12 Washer ASTM A276 304
Size A B C D E F G H Wt./Lbs. 13 Washer Teflon
Seat: 80 psi Air 80 psi Air
1/2 4-1/4 3-1/2 2-3/8 1-3/8 7/16 4 x 5/8 3 5 4.5 14 Packing Teflon
3/4 4-5/8 3-7/8 2-3/4 1-11/16 7/16 4 x 5/8 3-1/8 5 5.5 15 Gasket Teflon
1 5 4-1/4 3-1/8 2 7/16 4 x 5/8 3-3/8 6-3/8 6.5 Fig. S16F6RT (Dimensions in Inches)
1-1/2 6-1/2 5 3-7/8 2-7/8 9/16 4 x 5/8 4-1/8 9 12.5 Size A B C D E F G H Port Wt./Lbs.
2 7 6 4-3/4 3-5/8 5/8 4 x 3/4 4-5/8 11 20 2 7 6 4-3/4 3-5/8 5/8 4-3/4 4-1/8 9 1-1/2 21
2-1/2 7-1/2 7 5-1/2 4-1/8 11/16 4 x 3/4 5-1/4 14 28 2-1/2 7-1/2 7 5-1/2 4-1/8 11/16 4-3/4 4-3/4 11 2 29
3 8 7-1/2 6 5 3/4 4 x 3/4 7-3/8 16 43 3 8 7-1/2 6 5 3/4 4-3/4 5-1/4 14 2-3/8 35
4 9 9 7-1/2 6-3/16 15/16 8 x 3/4 8-1/2 18 71 4 9 9 7-1/2 6-3/16 15/16 8-3/4 6-1/4 16 3 57
6 15-1/2 11 9-1/2 8-1/2 1 8 x 7/8 12-7/8 24 151 6 10-1/2 11 9-1/2 8-1/2 1 8-7/8 7-5/8 20 4-3/8 97
8 18 13-1/2 11-3/4 10-5/8 1-1/8 8 x 7/8 15-3/8 30 240 8 11-1/2 13-1/2 11-3/4 10-5/8 1-1/8 8-7/8 11 24 6 192
10 21 16 14-1/2 12-3/4 1-3/16 12 x 1 17-1/8 40 465 10 13 16 14-1/4 12-3/4 1-3/16 12-1 12-3/8 30 7-3/8 315
12 24 19 17 16-1/4 1-1/4 12 x 1 18-3/4 48 665 12 14 19 17 15 1-1/4 12-1 15-1/2 36 10 550
Fig. S37F6RT (Dimensions in Inches)
Size A B C D E F G H Wt./Lbs. Fig. S36F6RT (Dimensions in Inches)
1/2 5-1/2 3-3/4 2-5/8 1-3/8 9/16 4 x 5/8 3 5 8 Size A B C D E F G H Port Wt./Lbs.
3/4 6 4-5/8 3-1/4 1-11/16 5/8 4 x 3/4 3-1/8 5 10 2 8-1/2 6-1/2 5 3-5/8 7/8 8 x 3/4 4 9 1-1/2 30
1 6-1/2 4-7/8 3-1/2 2 11/16 4 x 3/4 3-3/8 6-3/8 13 2-1/2 9-1/2 7-1/2 5-7/8 4-1/8 1 8 x 7/8 4-3/4 11-7/8 2 48
1-1/2 7-1/2 6-1/8 4-1/2 2-7/8 13/16 4 x 7/8 4 9 26 3 11-1/8 8-1/4 6-5/8 5 1-1/8 8 x 7/8 4-7/8 14 2-3/8 60
2 8-1/2 6-1/2 5 3-5/8 7/8 8 x 3/4 5 11 33 4 12 10 7-7/8 6-3/16 1-1/4 8 x 7/8 5-7/8 16 3 95
2-1/2 9-1/2 7-1/2 5-7/8 4-1/8 1 8 x 7/8 5-1/4 14 53 6 15-7/8 12-1/2 10-5/8 8-1/2 1-7/16 12 x 7/8 7-1/4 21 4-3/8 172
3 11-1/8 8-1/4 6-5/8 5 1-1/8 8 x 7/8 6-5/8 16 75 8 16-1/2 15 13 10-5/8 1-5/8 12 x 1 12-1/2 24 6 324
4 12 10 7-7/8 6-3/16 1-1/4 8 x 7/8 7-7/8 18 120 10 18 17-1/2 15-1/4 12-3/4 1-7/8 16 x 1-1/8 13-7/8 24 7-3/8 465
6 15-7/8 12-1/2 10-5/8 8-1/2 1-7/16 12 x 7/8 13-5/8 24 260 12 19-3/4 20-1/2 17-3/4 15 2 16 x 1-1/4 15-1/2 30 10 800
8 19-3/4 15 13 10-5/8 1-5/8 12 x 1 15-5/8 30 470
10 22-3/8 17-1/2 15-1/4 12-3/4 1-7/8 16 x 1-1/8 20 40 690
12 25-1/2 20-1/2 17-3/4 15 2 16 x 1-1/4 21-5/8 48 970

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0311-03 4/30/06 9:28 PM Page 1

319-06

WILLIAM E. WILLIAMS VALVE CORP.


Stainless Steel Flanged Gate Valves
150 Lb.
Fig. S15F6-316 Applicable Standards
Part Material Shell Wall Thickness: API 603; MSS-SP-42; ANSI B16.34
1 Body ASTM A 351 CF8M Face-to-Face or End-to End: ANSI B16.10
2 Bonnet ASTM A 351 CF8M Flange Dimensions: ANSI B16.5
Weld End Dimensions: ANSI B16.25
3 Wedge ASTM A 351 CF8M
Note: API 600 Design (renewable seat rings & heavy wall)
4 Stem ASTM A 182 F316
available upon request
5 Gland Flange ASTM A 351 CF8M
6 Packing Teflon Fig. S15F6 (Dimensions in Inches)
7 Bonnet Nut ASTM A 276 GR 304
Size A B C D E F G H Wt./Lbs.
8 Bonnet Bolt ASTM A 276 GR 304 1/2 4-1/4 3-1/2 2-3/8 1-3/8 7/16 4 x 5/8 4 7-1/2 7
9 Gasket Teflon 3/4 4-5/8 3-7/8 2-3/4 1-11/16 7/16 4 x 5/8 4 8-1/8 8
10 Gland ASTM A 182 F316 1 5 4-1/4 3-1/8 2 7/16 4 x 5/8 5 9-1/8 12
11 Gland Nut ASTM A 276 GR 304 1-1/2 6-1/2 5 3-7/8 2-7/8 9/16 4 x 5/8 6-1/2 11-3/4 18
12 Gland Bolt ASTM A 276 GR 304 2 7 6 4-3/4 3-5/8 5/8 4 x 3/4 7 14-1/2 28
13 Gland Bolt Pin ASTM A 276 GR 304 2-1/2 7-1/2 7 5-1/2 4-1/8 11/16 4 x 3/4 7 14-1/2 40
14 Yoke Sleeve ASTM A 320 B8F 3 8 7-1/2 6 5 3/4 4 x 3/4 8 18 53
15 Sleeve Gland ASTM A 351 CF8M 4 9 9 7-1/2 6-3/16 15/16 8 x 3/4 9 21-13/16 78
6 10-1/2 11 9-1/2 8-1/2 1 8 x 7/8 10 29-1/2 137
16 Handwheel ASTM A 197
8 11-1/2 13-1/2 11-3/4 10-5/8 1-1/8 8 x 7/8 13 37-5/16 202
17 Handwheel Nut ASTM A 276 GR 304 10 13 16 14-1/4 12-3/4 1-3/16 12 x 1 14 46-1/2 320
18 Grease Nipple Stainless Steel 12 14 19 17 15 1-1/4 12 x 1 15-7/8 52-1/2 450
14 15 21 18-3/4 16-1/4 1-3/8 12 x 1-1/8 24 57-5/16 625
Tests 16 16 23-1/2 21-1/4 18-1/2 1-7/16 16 x 1-1/8 28 64-1/2 720
Class 150 18 17 25 22-3/4 21 1-9/16 16 x 1-1/4 28 72-13/16 1300
Shell: 425 psi Seat: 80 psi Air* 20 18 27-1/2 25 23 1-11/16 20 x 1-1/4 32 80-1/2 1600
* Optional high pressure seat test per API 598 available upon request. 24 20 32 29-1/2 27-1/4 1-7/8 20 x 1-3/8 32 96-5/16 2350

300 Lb. Applicable Standards Fig. S30F6 (Dimensions in Inches)


Shell Wall Thickness: ANSI B16.34
Fig. S30F6-316 Face-to-Face or End-to End: ANSI B16.10 Size A B C D E F G H Wt./Lbs.
Flange Dimensions: ANSI B16.5 1-1/2 7-1/2 6-1/8 4-1/2 2-7/8 13/16 4 x 7/8 8 12-7/8 32
600 Lb. 2 8-1/2 6-1/2 5 3-5/8 7/8 8 x 3/4 8 15 42
Weld End Dimensions: ANSI B16.25
Fig. S60F6-316 Note: API 600 Design (renewable seat rings 2-1/2 9-1/2 7-1/2 5-7/8 4-1/8 1 8 x 7/8 8 15-1/2 68
& heavy wall) available upon request 3 11-1/8 8-1/4 6-5/8 5 1-1/8 8 x 7/8 10 18-1/8 82
4 12 10 7-7/8 6-3/16 1-1/4 8 x 7/8 12 23 135
Part Material 6 15-7/8 12-1/2 10-5/8 8-1/2 1-7/16 12 x 7/8 14 31 235
1 Body ASTM A 351 CF8M 8 16-1/2 15 13 10-5/8 1-5/8 12 x 1 16 38-1/8 345
2 Bonnet ASTM A 351 CF8M 10 18 17-1/2 15-1/4 12-3/4 1-7/8 16 x 1-1/8 18 46-1/8 630
3 Wedge ASTM A 351 CF8M 12 19-3/4 20-1/2 17-3/4 15 2 16 x 1-1/4 20 56 910
4 Stem ASTM A 182 F316 14 30 23 20-1/4 16-1/4 2-1/8 20 x 1-1/4 28 64-1/8 1350
16 33 25-1/2 22-1/2 18-1/2 2-1/4 20 x 1-3/8 28 73-1/2 1700
5 Gland Flange ASTM A 351 CF8M
18 36 28 24-3/4 21 2-3/8 24 x 1-3/8 32 85-1/4 2400
6 Packing Teflon 20 39 30-1/2 27 23 2-1/2 24 x 1-3/8 32 94-1/2 3120
7 Bonnet Nut ASTM A 276 GR 304 24 45 36 32 27-1/4 2-3/4 24 x 1-5/8 32 11-3/8 4770
8 Bonnet Bolt ASTM A 276 GR 304
9 Gasket Teflon*
Fig. S60F6 (Dimensions in Inches)
10 Gland ASTM A 182 F316
11 Gland Nut ASTM A 276 GR 304 Size A B C D E F G H Wt./Lbs.
12 Gland Bolt ASTM A 276 GR 304 2 11-1/2 6-1/2 5 3-5/8 1 8 x 3/4 8 19 93
13 Gland Bolt Pin ASTM A 276 GR 304 2-1/2 13 7-1/2 5-7/8 4-1/8 1-1/8 8 x 7/8 9 19-7/8 141
3 14 8-1/4 6-5/8 5 1-1/4 8 x 7/8 14 27-1/2 170
14 Yoke Sleeve ASTM A 320 B8F**
4 17 10-3/4 8-1/2 6-1/8 1-1/2 8x1 16 32-1/2 256
15 Sleeve Gland ASTM A 351 CF8M 6 22 14 11-1/2 8-1/2 1-7/8 12 x 1-1/8 18 41-1/4 571
16 Handwheel ASTM A 197 8 26 16-1/2 13-3/4 10-5/8 2-3/16 12 x 1-1/4 20 52-1/4 867
17 Handwheel Nut ASTM A 276 GR 304 10 31 20 17 12-3/4 2-1/2 16 x 1-3/8 24 60-1/4 1427
18 Grease Nipple Stainless Steel 12 33 22 19-1/4 15 2-5/8 20 x 1-3/8 28 73-1/4 2267
19 Set Screw Stainless Steel Tests
300 Lb. 600 Lb.
*600 Lb. valves use stainless steel design ring joints. Shell: 1100 psi 2175 psi
**On 600 Lb. valve yoke is equipped with thrust ball bearings. Seat: 80 psi Air* 80 psi Air*
* Optional high pressure test per API 598 available upon request.

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0312-03 4/30/06 9:29 PM Page 1

320-06

WILLIAM E. WILLIAMS VALVE CORP.


Stainless Steel Globe Valves Stainless Steel Swing Check Valves
150 Lb. Applicable Standards 150 Lb. – Fig. No. S151F6-316 Applicable Standards
Fig. No. S152F6-316 Shell Wall Thickness: Shell Wall Thickness:
150 lb. – MSS-SP-42; ANSI B16.34
300 Lb. – Fig. No. S301F6-316
150 Lb. – MSS-SP-42; ANSI B16.34
300 Lb. 300 & 600 Lb. – ANSI B16.34 600 Lb. – Fig. No. S601F6-316 300 & 600 Lb. – ANSI B16.34
Fig. No. S302F6-316 Face-to-Face or End-to End: ANSI B16.10 Face-to-Face, End-to End:
Flange Dimensions: ANSI B16.5 ANSI B16.10
600 Lb. Weld End Dimensions: ANSI B16.25 Flange Dimensions: ANSI B16.5
Fig. No. S602F6-316 Note: API 600 Design (renewable seat Weld End Dimensions: ANSI B16.25
rings & heavy wall) available upon request. Note: API 600 Design (renewable
Tests 150 Lb. 300 Lb. 600 Lb. seat rings & heavy wall) available
Shell: 425 psi 1100 psi 2175 psi upon request.
Seat: 80 psi 80 psi 80 psi (Air)
Tests 150 Lb. 300 Lb. 600 Lb.
Part Material Shell: 425 psi 1100 psi 2175 psi
1 Body ASTM A 351 CF8M Seat: 80 psi 80 psi 80 psi (Air)
2 Bonnet ASTM A 351 CF8M
3 Disc ASTM A 351 CF8M Part Material
4 Gland Flange ASTM A 351 CF8M 1 Body ASTM A 351 CF8M
5 Disc Nut ASTM A 182 F316 2 Cover ASTM A 351 CF8M
6 Stem ASTM A 182 F316 3 Disc ASTM A 351 CF8M
7 Bonnet Bolt ASTM A 276 GR 304 4 Hanger ASTM A 351 CF8M
8 Bonnet Nut ASTM A 276 GR 304 5 Hinge Pin ASTM A 182 F316
9 Packing Teflon* 6 Gasket Teflon
10 Packing Gland ASTM A 182 F316 7 Cover Nut ASTM A 276 GR 304
11 Gasket Teflon* 8 Cover Bolt ASTM A 276 GR 304
12 Gland Bolt Pin ASTM A 276 GR 304 9 Disc Nut ASTM A 276 GR 316
13 Gland Bolt ASTM A 276 GR 304 10 Side Plug ASTM A 276 GR 316
14 Gland Nut ASTM A 276 GR 304 11 Washer ASTM A 276 GR 316
15 Yoke Sleeve ASTM A 320 B8F Fig. S151F6 (Dimensions in Inches)
16 Washer Steel
17 Handwheel ASTM A 197 Size A B C D E F G Wt./Lbs.
1/2 4-1/4 3-1/2 2-3/8 1-3/8 7/16 4 X 5/8 2-3/4 8
18 Handwheel Nut ASTM A 276 GR 304
3/4 4-5/8 3-7/8 2-3/4 1-11/16 7/16 4 X 5/8 3-1/4 9-1/2
*600 Lb. valves use stainless steel design ring joints 1 5 4-1/4 3-1/8 2 7/16 4 X 5/8 3-1/2 10-1/2
1-1/2 6-1/2 5 3-7/8 2-7/8 9/16 4 X 5/8 3-3/4 16-1/2
Fig. S152F6 (Dimensions in Inches) 2 8 6 4-3/4 3-5/8 5/8 4 X 3/4 5 22
Size A B C D E F G H Wt./Lbs. 2-1/2 8-1/2 7 5-1/2 4-1/8 11/16 4 X 3/4 5 33
1/2 4-1/4 3-1/2 2-3/8 1-3/8 7/16 4 x 5/8 4 7 65 3 9-1/2 7-1/2 6 5 3/4 4 X 3/4 6-1/4 45
3/4 4-5/8 3-7/8 2-3/4 1-11/16 7/16 4 x 5/8 4 7-3/8 10 4 11-1/4 9 7-1/2 6-3/16 15/16 8 X 3/4 6-1/2 71
1 5 4-1/4 3-1/8 2 7/16 4 x 5/8 5 8-1/2 11 6 14 11 9-1/2 8-1/2 1 8 X 7/8 8 123
1-1/2 6-1/2 5 3-7/8 2-7/8 9/16 4 x 5/8 6-1/2 9-7/8 20 8 19-1/2 13-1/2 11-3/4 10-5/8 1-1/8 8 X 7/8 10 220
2 8 6 4-3/4 3-5/8 5/8 4 x 3/4 8 10-3/4 32 10 24-1/2 16 14-1/4 12-3/4 1-3/16 12 X 1 12-7/8 330
2-1/2 8-1/2 7 5-1/2 4-1/8 11/16 4 x 3/4 8-1/2 12-3/8 50 12 27-1/2 19 17 15 1-1/4 12 X 1 14 500
3 9-1/2 7-1/2 6 5 3/4 4 x 3/4 9-1/2 13-1/2 61 14 31 21 18-3/4 16-1/4 1-3/8 12 X 1-1/8 16-1/8 685
4 11-1/2 9 7-1/2 6-3/16 15/16 8 x 3/4 11-1/2 14-3/8 97 16 34 23-1/2 21-1/4 18-1/2 1-7/16 16 X 1-1/8 18-3/8 1050
6 16 11 9-1/2 8-1/2 1 8 x 7/8 14 16-1/2 172 18 38-1/2 25 22-3/4 21 1-9/16 16 X 1-1/4 20-3/8 1510
8 19-1/2 13-1/2 11-3/4 10-5/8 1-1/8 8 x 7/8 14 19-7/8 278 20 38-1/2 27-1/2 25 23 1-11/16 20 X 1-1/4 22-1/2 2020
10 24-1/2 16 14-1/4 12-3/4 1-3/16 12 x 1 16 22-3/8 485 24 51 32 29-1/2 27-1/4 1-7/8 20 X 1-3/8 24-3/8 2900
12 27-1/2 19 17 15 1-1/4 12 x 1 18 26-7/8 862 Fig. S301F6 (Dimensions in Inches)
Fig. S302F6 (Dimensions in Inches) Size A B C D E F G Wt./Lbs.
Size A B C D E F G H Wt./Lbs. 1-1/2 9-1/2 6-1/8 4-1/2 2-7/8 13/16 4 x 7/8 5-5/8 28
1/2 6 3-3/4 2-5/8 1-3/8 9/16 4 x 5/8 4 7-1/2 11 2 10-1/2 6-1/2 5 3-5/8 7/8 8 x 3/4 6-3/8 35
3/4 7 4-5/8 3-1/4 1-11/16 5/8 4 x 3/4 5 8-3/8 16-1/2 2-1/2 11-1/2 7-1/2 5-7/8 4-1/8 1 8 x 7/8 6-3/4 56
1 8 4-7/8 3-1/2 2 11/16 4 x 3/4 6-1/2 9-3/8 22 3 12-1/2 8-1/4 6-5/8 5 1-1/8 8 x 7/8 7-3/8 78
1-1/2 9 6-1/8 4-1/2 2-7/8 13/16 4 x 7/8 8 10-1/2 40 4 14 10 7-7/8 6-3/16 1-1/4 8 x 7/8 9 112
2 10-1/2 6-1/2 5 3-5/8 7/8 8 x 3/4 8 11-7/8 51 6 17-1/2 12-1/2 10-5/8 8-1/2 1-7/16 12 x 7/8 11-1/2 210
2-1/2 11-1/2 7-1/2 5-7/8 4-1/8 1 8 x 7/8 9-1/2 14-7/8 77 8 21 15 13 10-5/8 1-5/8 12 x 1 13-3/8 340
3 12-1/2 8-1/4 6-5/8 5 1-1/8 8 x 7/8 10 13 97 10 24-1/2 17-1/2 15-1/4 12-3/4 1-7/8 16 x 1-1/8 15-3/8 515
4 14 10 7-7/8 6-3/16 1-1/4 8 x 7/8 12 15-1/2 146 12 28 20-1/2 17-3/4 15 2 16 x 1-1/4 17-3/8 760
6 17-1/2 12-1/2 10-5/8 8-1/2 1-7/16 12 x 7/8 14 18-7/8 298 14 33 23 20-1/4 16-1/4 2-1/8 20 x 1-1/4 19-1/2 1050
8 22 15 13 10-5/8 1-5/8 12 x 1 16 21-1/2 510 16 34 25-1/2 22-1/2 18-1/2 2-1/4 20 x 1-3/8 21-1/2 1355
10 24-1/2 17-1/2 15-1/4 12-3/4 1-7/8 16 x 1-1/8 18 26-3/8 860 18 38-1/2 28 24-3/4 21 2-3/8 24 x 1-3/8 24 1720
12 28 20-1/2 17-3/4 15 2 16 x 1-1/4 20 31 1220 20 40 30-1/2 27 23 2-1/2 24 x 1-3/8 26-1/2 2220
24 53 36 32 27-1/4 2-3/4 24 x 1-5/8 28-3/8 3460
Fig. S602F6 (Dimensions in Inches)
Fig. S601F6 (Dimensions in Inches)
Size A B C D E F G H Wt./Lbs.
2 11-1/2 6-1/2 5 3-5/8 1 8 x 3/4 10 17-7/8 90 Size A B C D E F G Wt./Lbs.
2-1/2 13 7-1/2 5-7/8 4-1/8 1-1/8 8 x 7/8 11-1/2 20-3/4 125 2 11-1/2 6-1/2 5 3-5/8 1 8 x 3/4 8-1/2 70
3 14 8-1/4 6-5/8 5 1-1/4 8 x 7/8 14 21-1/2 155 2-1/2 13 7-1/2 5-7/8 4-1/8 1-1/8 8 x 1/8 8-1/2 100
4 17 10-3/4 8-1/2 6-1/8 1-1/2 8x1 16 24-7/8 260 3 14 8-1/4 6-5/8 5 1-1/4 8 x 7/8 10-3/8 180
4 17 10-3/4 8-1/2 6-1/8 1-1/2 8x1 11-1/2 220
6 22 14 11-1/2 8-1/2 1-7/8 12 x 1-1/8 18 30-3/8 710
6 22 14 11-1/2 8-1/2 1-7/8 12 x 1-1/8 13 440
8 26 16-1/2 13-3/4 10-5/8 2-3/16 12 x 1-1/4 20 35-7/8 1300
8 26 16-1/2 13-3/4 10-5/8 2-3/16 12 x 1-1/4 14-7/8 705
10 31 20 17 12-3/4 2-1/2 16 x 1-3/8 24 42-1/2 10 31 20 17 12-3/4 2-1/2 16 x 1-3/8 16-3/8 1110
12 33 22 19-1/4 15 2-5/8 20 x 1-3/8 26 47-3/4 12 33 22 19-1/4 15 2-5/8 20 x 1-3/8 18-7/8 1600

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0313-03 4/30/06 9:30 PM Page 1

321-06

WILLIAM E. WILLIAMS VALVE CORP.


Part Material
200 Lb. Stainless Steel Gate Valves 1 Body ASTM A 351 CF8M
Fig. No. SN20T6316 2 Bonnet ASTM A 351 CF8M
3 Disc ASTM A 182 F316
Non-Rising Stem 4 Stern ASTM A 182 F316
OS&Y Available 5 Gland ASTM A 182 F316
6 Gland Nut ASTM A 351 CF8M
Threaded Bonnet 7 Retaining Ring ASTM A 182 F316
Integral Seats 8 Washer ASTM A 182 F316
9 Packing Teflon
Applicable Standards 10 Gasket Teflon
Threaded end is in 11 Handwheel ASTM A 126
12 Handwheel Hex Nut ASTM A 276 GR. 304
accordance with
13 I.D. Label Aluminum
NPT spec ANSI B2.1
150 PSI Steam Fig. No. SN20T6 (Dimensions in Inches)
200 WOG, Temp. 350°F Size A B H W Wt./Lbs.
1/2 2.01 .59 3.07 2.64 .86
Tests 3/4 2.21 .79 3.27 2.64 1.06
Test Pressure 1 2.50 .98 3.54 2.95 1.45
Shell: 300 psi 1-1/4 2.80 1.26 3.82 2.95 2.20
Seat: 220 psi 1-1/2 3.02 1.57 4.06 3.39 3.12
2 3.41 1.97 4.65 3.98 4.64

Part Material
200 Lb. Stainless Steel Globe Valves 1 Body ASTM A 351 CF8M
Fig No. S202T6316 2 Bonnet ASTM A 351 CF8M
3 Disc ASTM A 182 F316
Rising Stem 4 Stern ASTM A 182 F316
Threaded Bonnet 5 Gland ASTM A 182 F316
6 Stem Nut ASTM A 182 F316
Integral Seats 7 Gland Nut ASTM A 351 CF8M
8 Stem Washer ASTM A 182 F316
Applicable Standards 9 Packing Collar ASTM A 182 F316
Threaded end is in 10 Packing Reinforced Teflon
accordance with 11 Gasket Reinforced Teflon
NPT spec ANSI B2.1 12 Handwheel ASTM A 126
150 PSI Steam 13 Handwheel Hex Nut ASTM A 276 GR. 304
200 WOG, Temp. 350°F 14 I.D Label Aluminum

Fig. No. S202T6 (Dimensions in Inches)


Tests
Test Pressure Size A B H W Wt./Lbs.
Shell: 300 psi 1/2 2.56 .59 3.74 2.76 .99
Seat: 220 psi 3/4 3.15 .71 3.74 2.76 1.38
1 3.54 .94 3.74 3.15 1.83
1-1/4 4.13 1.18 4.33 3.54 2.90
1-1/2 4.72 1.45 4.53 3.54 3.74
2 5.51 1.81 5.19 3.94 5.39

200 Lb. Stainless Steel Swing Check Valves Part Material


Fig. S201T6316 1 Body ASTM A 351 CF8M
Applicable Standards Tests 2 Cover ASTM A 351 CF8M
Threaded Cover • 45° Y Pattern Design Threaded end is in accordance Test Pressure 3 Disc ASTM A 351 CF8M
Integral Seat with NPT spec. ANSI B2.1 Shell: 300 psi 4 Hinge Pin ASTM A 182 F316
Soft Seat Optional: (See detail) 150 PSI Steam Seat: 220 psi 5 Washer Teflon
200 WOG, Temp. 350°F 6 Plug ASTM A 182 F316
7 Gasket Teflon
8 Screw Washer ASTM A 182 F316
9 Seat Teflon
Fig. No. S201T6 (Dimensions in Inches)
Size L H Wt./Lbs.
1/2 2.56 1.81 .70
3/4 3.17 2.05 1.12
1 3.54 2.36 1.50
1-1/4 4.13 2.83 2.35
1-1/2 4.72 3.15 3.08
2 5.51 3.74 4.62

WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
316 4/30/06 9:31 PM Page 1

322-06

MILWAUKEE VALVE CO.


NAVY BRONZE GLOBE — FLANGED ENDS NAVY BRONZE ANGLE — FLANGED ENDS

1021-001 1023-001
100 psi @ 425°F 100 psi @ 425°F
Bolted Bonnet – Gland Packed Bolted Bonnet – Gland Packed
NI-CU Trim NI-CU Trim
NAVSEA 803-1385541 NAVSEA 803-1385541

DIMENSIONS – INCHES
SIZE A B C DIMENSIONS – INCHES
2-1/2 9 10-1/8 7 SIZE A B C
3 10 11-1/4 8 2-1/2 4-1/2 8-3/8 7
4 12-1/2 13-15/16 9 3 5 9-1/8 8
5 14-3/4 16-7/16 11 4 6 11-5/16 9
6 17 17-7/8 12 5 7-1/8 13-3/4 11
8 21-1/2 22-7/16 16 6 8 15-1/4 12

NAVY BRONZE GATE — FLANGED ENDS


1315
1305
250 psi WOG
100 psi WOG Bolted Bonnet, O.S.&Y. Rising Stem
Bolted Bonnet, O.S.&Y. Rising Stem Gland Packed – NI-CU Trim
Gland Packed – NI-CU Trim NAVSEA 803-2177917
MIL-V-1189 Type 1, Class 1 MIL-V-1189 Type 1, Class 2
DIMENSIONS – INCHES
SIZE A B C DIMENSIONS – INCHES
1 5 8-1/4 5 SIZE A B C
1-1/4 5-1/4 9-1/2 5 2-1/2 6 15-9/16 8
1-1/2 5-1/2 10-1/8 7 3 6-1/4 17-5/8 8
2 5-3/4 11-3/4 7 3-1/2 6-1/2 19-9/16 8
2-1/2 6 14-3/8 7 4 6-3/4 22-7/16 9
3 6-1/4 16-5/8 8 5 7-1/2 26-7/8 10
3-1/2 6-1/2 17-13/16 8 6 8 30-5/8 10
4 6-3/4 20-3/8 9 8 9-1/2 39-1/16 12
5 7-1/2 26 10 10 11 47-9/16 16
6 8 30-1/4 11 12 12-1/2 55-7/16 16
8 9-1/2 39-1/4 14

BALL VALVES – SILBRAZE, WELD, FLANGED, HOSE ENDS


1003 1004
700 PSI 400 PSI
Bronze, NI-CU, CU-NI, or Stainless Body Bronze Body
Bronze, NI-CU, CU-NI, or Stainless Ends Bronze, NI-CU, or CU-NI Ends
Titanium or Stainless Ball Titanium or Stainless Ball
803-5001003 803-5001004
A- A-Butt B C
Size A- A- Butt A- A- A- B B- C
Silbraze Weld or Silbraze Socket Flanged Flanged SIZE Silbraze Weld
Socket X Hose Weld X 3 12.437 12
Weld Hose
1/4 3.755 3.755 7.848 2.104 3.062 4.287 3-1/2 12.437 12
3/8 3.885 3.885 7.978 2.408 3.157 4.332 4 11.852 11.852 12.437 12
1/2 4.191 4.191 4.441 4.441 8.472 2.806 3.556 5.832 5 11.852 11.852 12.437 12
3/4 4.520 4.770 8.583 2.988 3.756 5.836 6 16.478 12.437 12
1 5.048 5.172 5.361 5.423 9.423 3.364 4.113 7.082
1-1/4 5.422 5.298 9.643 3.364 4.082 7.082
1-1/2 5.972 5.598 5.973 5.786 10.068 3.445 4.634 7.026
2 6.582 6.458 11.739 4.875 4.875 8.526
2-1/2 7.349 6.725 8.10 7.788 12.944 5.156 5.156 10.026

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
317 4/30/06 9:32 PM Page 1

323-06

MILWAUKEE VALVE CO.


NAVY BRONZE SWING CHECK – FLANGED ENDS 1281-001
1260-004 100 psi WOG
Bronze Disc – Bolted Cap
250 psi WOG MIL-V-17547, Type A, Class 1
NI-CU Disc & Seat Mil-V-17547, Type A,
DIMENSIONS – INCHES
803-1385637 Class 2
SIZE A B
Size A B C
2 7-5/16 4-1/4
2-1/2 10 5-5/8 6-1/8
2-1/2 8-5/16 4-1/4
3 10-3/4 6-9/32 6-5/8
3 9 5-1/2
4 12-1/4 7-5/32 7-11/16
3-1/2 9 5-15/16
5 13-3/4 8-21/32 9-1/16
4 11-3/4 6-9/16
6 15-1/4 9-7/16 10-1/8
5 13-1/2 7-13/16
8 18-1/2 11-11/16 12-3/8
6 15-1/2 8-7/8
10 21-3/4 13-19/32 15
8 19-1/2 11-1/16
12 25-1/4 15-25/32 17-5/8
10 22 12
HOSE END GLOBE/ANGLE – COMMERCIAL/NAVY FLANGED
1471 1484
ANSI Hose Globe Valve Hose Angle Valve
150 WOG 250 WOG
Bolted Bonnet, Gland Packed Renewable Disc 2-1/2" Bolted Bonnet
Renewable Composition Disc (Specify EPR or Nitrile) (NAVSEA 803-1385712)
1481-Same as above, 1-1/2" Union Bonnet 1484 – Same as 1474,
but Hose Angle Valve (NAVSEA 803-1385711) but Hose Angle Valve
Size (in) A B C Size (in) A B C D
1471 SERIES – COMMERCIAL 1481 SERIES – COMMERCIAL
1-1/2 6-7/8 7-3/4 6 1-1/2 3-1/4 7-5/16 6 3-7/16
2-1/2 9-5/16 10-1/8 7 2-1/2 4-1/8 9-1/4 7 4-3/16
1474 SERIES – NAVY 1484 SERIES – NAVY
1-1/2 8-3/16 8-1/16 5 1-1/2 2-5/8 7-1/4 5 3-3/4
2-1/2 9-5/8 10-1/8 7 2-1/2 4-1/8 8-3/4 7 4-7/8

MARINE BRONZE GLOBE — SILBRAZED UNION ENDS MARINE BRONZE ANGLE — SILBRAZED UNION ENDS
161 SERIES 163 SERIES
200 psi SWP @ 425°F 200 psi SWP @ 425°F
400 psi WOG @ 150°F 400 psi WOG @ 150°F
Union Bonnet, Gland Packed Union Bonnet, Gland Packed
Renewable Disc & Seat Ring Renewable Disc and Seat Ring
Specify E.P.R. or Nitrile “O” Ring Specify E.P.R. or Nitrile “O” Ring
NAVSEA 803-4384536 – Type 1 NAVSEA 803-4384536 – Type 3
DIMENSIONS – INCHES DIMENSIONS – INCHES
SIZE A B C SIZE A B C
1/4 4 4-3/8 2 1/4 2 4-3/8 2
3/8 4-3/8 4-11/32 2-1/2 3/8 2-1/4 4-11/32 2-1/2
1/2 5-1/8 5-3/16 2-3/4 1/2 2-7/16 5-3/16 2-3/4
3/4 5-3/4 6-1/16 3 3/4 2-7/8 6-1/16 3
Optional Models: 1 6-3/8 6-7/8 3-1/2 Optional Models: 1 3-1/4 6-7/8 3-1/2
Soft Seat 161B 1-1/4 7-3/8 7-11/16 4 Soft Seat 163B 1-1/4 3-3/4 7-11/16 4
Stop Check 162A 1-1/2 8-1/4 8-3/8 4-3/4 Stop Check 164A 1-1/2 4-1/16 8-3/8 4-3/4
Needle 165A 2 9-5/8 10-7/16 5-1/4 Needle 168A 2 4-11/16 10-7/16 5-1/4

MARINE BRONZE SWING CHECK – SILBRAZED UNION MARINE BRONZE GATE – SILBRAZED UNION ENDS
ENDS 1146 SERIES
400 psi WOG @ 150°F
Non-rising Stem, Solid Wedge
Threaded Bonnet, Gland Packed
DIMENSIONS–INCHES
Specify E.P.R. or Nitrile “O” Ring
SIZE A B
DIMENSIONS–INCHES
1/4 4-7/16 1-9/16
SIZE A B C
3/8 5-1/8 1-3/4 1/4 3-5/8 3-15/16 2-1/8
1/2 5-3/4 1-3/4 3/8 4-1/4 3-15/16 2-1/8
5399 SERIES 3/4 6-9/16 2 1/2 4-7/8 4-3/8 2-3/4
400 psi WOG @ 150°F 1 7-1/4 2-7/16 3/4 5-1/2 4-3/4 2-3/4
Regrinding NI-CU Disc 1-1/4 8-5/16 2-7/8 1 6-1/16 5-1/8 3
Threaded Cap 1-1/2 9-1/8 3-1/4 1-1/4 7-1/16 6-1/16 3-3/4
Specify E.P.R. or Nitrile “O” Ring 2 10-13/32 3-15/16 1-1/2 7-5/8 6-3/4 4
NAVSEA 803-1385721 2 8-3/4 8 5

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
318 4/30/06 9:33 PM Page 1

324-06

MILWAUKEE VALVE CO.


BRONZE GATE VALVES
Figure #105 Figure #148
125 lb. SWP-200 lb. WOG • Non-Rising Stem 125 lb. SWP-200 lb. WOG • Rising Stem
Threaded Bonnet • Threaded Ends Threaded Bonnet • Threaded Ends
SPECIFICATIONS MILITARY SPECIFICATIONS
Conforms to: MSS SP-80. Type 1, Conforms to: MSS SP-80.
105 Class 125, Threaded Ends. 148 (WW-V-54 for Type II, Class A, Style 1).
MATERIAL LIST MATERIAL LIST
NO. PART MATERIAL SPECIFICATION
NO. PART MATERIAL SPECIFICATION
1 Body Bronze ASTM B 62 1 Body Bronze ASTM B 62
2 Bonnet Bronze ASTM B 62 2 Bonnet Bronze ASTM B 62
3 Wedge Bronze ASTM B 62 3 Wedge Disc Bronze ASTM B 62
4 Stem Bronze ASTM B 62 4 Stem Bronze ASTM B 62
5 Stuff Nut Rod Br. CA 360 5 Packing Graphite Commercial
6 Check Nut Rod Br. CA 360 6 Gland Bronze ASTM B 16
7 Gland
1 Rod Br. CA 360 7 Packing Nut Bronze Commercial
8 Wheel Nut Brass Commercial 8 Handwheel Mall. Iron Commercial
9 Handwheel Mall. Iron Commercial
10 Packing Non Asbestos 9 Identification Aluminum Commercial
Plate
11 Name Plate Sh. Alum. Commercial 10 Handwheel Nut Bronze Commercial
1Not used on 1/2” and smaller
DIMENSIONS–INCHES
DIMENSIONS–INCHES SIZE A B C
SIZE A B C 1/4 1-3/4 4-5/16 2
1/4 1-3/4 3-9/16 2 3/8 1-13/16 4-5/16 2
3/8 1-13/16 3-9/16 2 1/2 2 4-5/16 2
1/2 2 3-9/16 2 3/4 2-1/8 6-1/4 2-1/2
3/4 2-1/8 4-3/4 2-1/2 1 2-9/16 7 2-3/4
1 2-9/16 5 2-3/4 1-1/4 2-11/16 8-5/8 3-1/8
1-1/4 2-11/16 5-7/8 3-1/8 1-1/2 2-13/16 9-1/2 3-1/2
1-1/2 2-13/16 6-1/2 3-1/2 2 3-5/16 11-1/2 3-3/4
2 3-5/16 7-7/16 3-3/4 2-1/2 4-3/16 14-5/16 4-3/4
2-1/2 4-3/16 9-1/8 4-3/4 3 4-5/8 16-3/8 5-1/4
3 4-5/8 10-3/8 5-1/4

Figure #1141 Figure #1150


150 lb. SWP-300 lb. WOG • Non-Rising Stem 150 lb. SWP-300 lb. WOG • Rising Stem
Union Bonnet • Threaded Ends Union Bonnet • Threaded Ends
MILITARY SPECIFICATIONS MILITARY SPECIFICATIONS
Conforms to: MSS SP-80. Type 1, Conforms to: MSS SP-80.
1141 1150 (WW-V-54 for Type II, Class B, Style 1)
Class 150, Threaded Ends.
MATERIAL LIST MATERIAL LIST
NO. PART MATERIAL SPECIFICATION NO. PART MATERIAL SPECIFICATION
1 Body Bronze ASTM B 62 1 Body Bronze ASTM B 62
2 Bonnet Bronze ASTM B 62 2 Bonnet Bronze ASTM B 62
3 Wedge Disc Bronze ASTM B 62 3 Wedge Disc Bronze ASTM B 62
4 Stem Bronze ASTM B 62 4 Stem Bronze ASTM B 62
5 Stuffing Box Bronze ASTM B 16 5 Packing Graphite Commercial
Union Bonnet 6 Gland Bronze ASTM B 16
6 Bronze ASTM B 62
Nut 7 Packing Nut Bronze Commercial
Non 8 Handwheel Mall. Iron Commercial
7 Packing Commercial
Asbestos
8 Gland Bronze ASTM B 16 9 Identification Aluminum Commercial
Plate
9 Packing Nut Bronze Commercial 10 Handwheel Nut Bronze Commercial
10 Handwheel Mall. Iron
Commercial
DIMENSIONS–INCHES
Identification
11 Aluminum Commercial SIZE A B C
Plate
1/4 1-3/4 5-1/8 2
12 Handwheel Bronze Commercial
3/8 1-13/16 5-1/8 2
DIMENSIONS–INCHES
1/2 2-1/8 5-1/2 2-1/2
SIZE A B C
3/4 2-1/4 6-3/4 2-3/4
1/4 1-3/4 3-11/16 2
1 2-7/8 7-3/16 2-3/4
3/8 1-7/8 3-11/16 2
1-1/4 3-1/4 8-9/16 3-1/8
1/2 2-1/8 4-5/16 2-1/2
1-1/2 3-1/4 9-5/8 3-1/2
3/4 2-1/4 4-9/16 2-3/4
2 3-5/8 11-3/4 4
1 2-7/8 5-3/16 2-3/4
2-1/2 4-1/2 14-1/2 4-3/4
1-1/4 3-1/4 5-15/16 3-1/8
3 4-7/8 16-9/16 5-1/4
1-1/2 3-1/4 6-3/8 3-1/2
4 5-1/2 15-1/2 5-1/4
2 3-5/8 7-11/16 4

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
319 4/30/06 9:34 PM Page 1

325-06

MILWAUKEE VALVE CO.


BRONZE GATE VALVES
Figure #901 Figure #1151
QUICK OPENING 150 lb. SWP-300 lb. WOG • Rising Stem
150 lb. SWP-300 lb. WOG • Lever Handle Union Bonnet • Threaded Ends
Split Wedge • Threaded Ends
These valves are UL approved. MILITARY SPECIFICATIONS
Conforms to: MSS SP-80.
1151 (WW-V-54 for Type II, Class B, Style 1)
MATERIAL LIST
NO. PART MATERIAL MATERIAL LIST
1 Body Bronze NO. PART MATERIAL SPECIFICATION
2 Cap Bronze 1 Body Bronze ASTM B 62
3 Lever Bronze 2 Bonnet Bronze ASTM B 62
4 Male Disc Bronze 3 Wedge Disc Bronze ASTM B 62
5 Female Disc Bronze 4 Stem Bronze ASTM B 62
6 Bonnet (Center Piece) Bronze Union Bonnet Bronze
5 ASTM B 62
7 Stem Bronze Nut
8 Gland Bronze 6 Packing Graphite Commercial
9 Packing Nut Bronze 7 Gland Bronze ASTM B 16
10 Lever Handle Malleable Iron 8 Packing Nut Bronze Commercial
11 Packing Graphite 9 Handwheel Mall. Iron Commercial
12 Handle Nut Steel Identification
10 Aluminum Commercial
13 Gland Spring Steel Plate
DIMENSIONS–INCHES 11 Handwheel Nut Bronze Commercial
SIZE A B C D E F DIMENSIONS–INCHES
1/2 2 1-3/4 2-3/8 2-13/16 3-13/16 4-3/4 SIZE A B C
3/4 2-1/4 2-3/16 2-15/16 3-1/4 4-3/8 4-3/4 1/4 1-3/4 5-1/8 2
1 2-1/2 2-3/8 3-3/8 3-3/4 5 7 3/8 1-7/8 5-1/8 2
1-1/4 2-7/8 2-13/16 3-27/32 3-11/16 5-1/8 8-3/16 1/2 2-1/8 5-1/2 2-1/2
1-1/2 3-3/16 3-1/4 4-11/32 4-1/8 5-3/4 10-1/2 3/4 2-1/4 6-1/4 2-3/4
2 3-3/4 4-1/8 5-5/16 4-1/2 6-3/8 10-1/2 1 2-7/8 7-3/16 2-3/4
2-1/2 4-1/4 4-1/2 5-15/16 4-7/8 7 11-1/2 1-1/4 3-1/4 8-9/16 3-1/8
3 4-3/4 5-5/8 7 5 7-3/8 11-1/2 1-1/2 3-1/4 9-5/8 3-1/2
4 6 7-9/16 8-7/8 5-9/16 8-9/16 14 2 3-5/8 11-3/4 4
2-1/2 4-1/2 14-1/2 4-3/4
3 4-7/8 16-3/4 5-1/4

Figure #1156 Figure #1182


200 lb. SWP-400 lb. WOG • Rising Stem • Union Bonnet 300 lb. SWP-1000 lb. WOG • Rising Stem
Cu/Ni Seat Rings • Threaded Ends Union Bonnet • Cu/Ni Seat Rings • Threaded Ends
SPECIFICATIONS
1182 Conforms to: MSS SP-80.
SPECIFICATIONS MATERIAL LIST
Conforms to: MSS SP-80. Type 2, NO. PART MATERIAL SPECIFICATION
1156 1 Body Bronze ASTM-B61
Class 200, Threaded Ends.
MATERIAL LIST 2 Bonnet Bronze ASTM-B61
NO. PART MATERIAL SPECIFICATION 3 Wedge Disc Bronze ASTM-B61
1 Body Bronze ASTM B 61 4 Stem Bronze ASTM-B61
2 Bonnet Bronze ASTM B 61 5 Union Bonnet Nut Bronze ASTM-B61
3 Wedge Disc Bronze ASTM 61 6 Seat Ring Cu/Ni 90-10
4 Stem Bronze ASTM B 61 7 Gland Bronze ASTM-B16
5 Union Bonnet Bronze ASTM B 61 8 Packing Nut Bronze Commercial
Nut 9 Handwheel Mall. Iron Commercial
6 Seat Ring Cu-Ni 90-10 10 Identification Plate Aluminum Commercial
7 Packing Graphite Commercial 11 Handwheel Nut Bronze Commercial
8 Gland Bronze ASTM B 16 12 Packing Graphite Commercial
9 Packing Nut Bronze Commercial DIMENSIONS–INCHES
10 Handwheel Mall. Iron Commercial SIZE A B C
11 Identification Aluminum Commercial 1/4 1-13/16 5-1/8 2-1/4
Plate 3/8 1-7/8 5-1/8 2-1/4
12 Handwheel Nut Bronze Commercial 1/2 2-1/4 5-1/2 2-1/2
DIMENSIONS–INCHES 3/4 2-1/2 6-1/4 2-3/4
1 3 7-3/16 2-3/4
SIZE A B C
1-1/4 3-3/8 8-9/16 3-1/4
1/4 1-13/16 5-1/8 2-1/4 1-1/2 3-1/2 9-5/8 3-3/4
3/8 1-7/8 5-1/8 2-1/4 2 3-3/4 11-3/4 4-1/4
1/2 2-1/4 5-1/2 2-1/2 2-1/2 4-5/8 14-1/2 4-3/4
3/4 2-1/2 6-1/4 2-3/4 3 5 16-3/4 5-1/2
1 2-7/8 7-3/16 2-3/4
1-1/4 3-1/4 8-9/16 3-1/4 PATENTED
1-1/2 3-1/2 9-9/16 3-3/4
Wear-resistant stainless seat rings are securely expanded
2 3-3/4 11-3/4 4-1/4 into the body to assure trouble-free service. Normal
seating wear is restricted to the bronze wedge and can be
easily replaced.

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
320 4/30/06 9:35 PM Page 1

326-06

MILWAUKEE VALVE CO.


BRONZE GLOBE VALVES
MILITARY SPECIFICATIONS
Figure #590-T Conforms to: MSS SP-80. Figure #591A PATENTED
590-T (WW-V-51 for Type I, Class B, • This valve has flat seat shutoff with plug type disc
150 lb. SWP-300 lb. WOG 150 lb. SWP-300 lb. WOG for throttling action and replaceable seat and disc.
End Connection 1).
Union Bonnet Union Bonnet
For WOG service, specify 590-S (Buna-N Disc) or 590-T SS Disc & Seat
TFE Disc (Teflon Disc).
SPECIFICATIONS
Threaded Ends MATERIAL LIST Threaded Ends 591A Conforms to: MSS SP-80.
NO. PART MATERIAL SPECIFICATION MATERIAL LIST
1 Body Bronze ASTM B 62 NO. PART MATERIAL SPECIFICATION
2 Bonnet Bronze ASTM B 62 1 Body Bronze ASTM B 62
3 Disc TFE 2 Bonnet Bronze ASTM B 62
4 Stem Bronze ASTM B 62 3 Bonnet Nut Bronze ASTM B 62
ASTM B 16 4 Stuff Nut Bronze ASTM B 62
1/4" to 3/4" 5 Stem Bronze ASTM B 61
5 Disc Holder Bronze
ASTM B 62 1
6 Disc Ring Bronze ASTM B 62
1" and 3" Incl.
ASTM A 276,
Union Bonnet 7 Seat Ring St. Steel
6 Bronze ASTM B 62 TY. 420
Nut
ASTM A 276,
7 Packing Graphite Commercial 8 Disc St. Steel
TY. 420
8 Gland Bronze ASTM B 16 9 Gland Brass ASTM B 16
9 Packing Nut Bronze Commercial 10 Wheel Nut Brass ASTM B 16
10 Disc Nut Bronze Commercial 11 Handwheel Malleable Iron Commercial
11 Handwheel Malleable Iron Commercial 12 Packing Graphite
Identification 13 Name Plate Sh. Alum. Commercial
12 Aluminum Commercial
Plate 1
Not shown – used on 1-1/4" and larger valves only.
13 Handwheel Nut Bronze Commercial
DIMENSIONS–INCHES
DIMENSIONS–INCHES
SIZE A B C
SIZE A B C 1/2 2-1/2 4-1/2 2-1/4
1/8 2-1/16 3-15/16 2 3/4 2-15/16 5-1/8 2-3/4
1/4 2-1/16 3-15/16 2 1 3-3/8 5-1/4 3-1/8
3/8 2-1/16 4-1/4 2 1-1/4 3-7/8 6-3/16 3-1/2
1/2 2-7/16 4-9/16 2-1/2 1-1/2 4-1/2 7-1/4 3-3/4
3/4 2-15/16 5-3/16 2-3/4 2 4-7/8 8-3/16 4-3/4
1 3-7/16 5-1/2 3-1/8
1-1/4 3-7/8 6-1/4 3-1/2
1-1/2 4-1/2 7-1/8 3-3/4
2 5-3/4 8-7/8 4-3/4
2-1/2 6-3/4 10-5/8 5-1/4
3 8 12-1/8 6

MILITARY SPECIFICATIONS
Conforms to: MSS SP-80.
570 (WW-V-51 for Type I, Class C,
Figure #570 End Connection 1, except with integral seat). Figure #600
MATERIAL LIST
200 lb. SWP-400 lb. WOG 200 lb. SWP-400 lb. WOG
NO. PART MATERIAL SPECIFICATION
Union Bonnet Threaded Bonnet
1 Body Bronze ASTM B 61
Bronze Disc & Seat 2 Bonnet Bronze ASTM B 61
Bronze Needle Point Disc
Threaded Ends 3 Disc Bronze ASTM B 61 Threaded Ends MATERIAL LIST
4 Stem Bronze ASTM B 61 NO. PART MATERIAL
Union Bonnet 1 Body Bronze
5 Bronze ASTM B 61
Nut 2 Bonnet Bronze
6 Packing Graphite Commercial 3 Stem Bronze
7 Gland Bronze ASTM B 16 4 Seat Ring (Pressed In) Commercial
8 Packing Nut Bronze Commercial 5 Packing Graphite
9 Handwheel Malleable Iron Commercial 6 Gland Commercial
Identification 7 Packing Nut Commercial
10 Aluminum Commercial
Plate 8 Handwheel Commercial
11 Handwheel Nut Bronze Commercial 9 Identification Plate Commercial
12 Disc Ring Bronze Commercial 10 Handwheel Nut Commercial
DIMENSIONS–INCHES DIMENSIONS–INCHES
SIZE A B C SIZE A B C
1/8 2-1/16 4 2 1/8 1-5/8 3-3/16 2
1/4 2-1/16 4 2 1/4 1-5/8 3-3/16 2
3/8 2-1/16 4-1/4 2 3/8 1-13/16 3-3/16 2
1/2 2-7/16 4-5/8 2-1/2 1/2 2-5/16 3-5/8 2
3/4 2-15/16 5-3/16 2-3/4 3/4 2-9/16 3-15/16 2-1/4
1 3-3/4 6-3/8 3-1/8
1-1/4 4-1/4 7 3-1/2
1-1/2 4-3/4 7-11/16 4
2 5-3/4 9 4-3/4
2-1/2 6-3/4 10-1/4 5-1/2
3 8 12 6

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
321 4/30/06 9:36 PM Page 1

327-06

MILWAUKEE VALVE CO.


Bronze Angle Valve Figure #504 Bronze Angle Valve Figure #595T
125 lb. SWP / 200 lb. WOG 150 lb. SWP / 300 lb. WOG
Union Bonnet / Threaded Ends Union Bonnet / Threaded Ends
1/4" to 1/2" sizes have the disc integral with the stem
and have no disc ring
For WOG service, specify 595-S (Buna-N Disc) or 595-T
MILITARY SPECIFICATIONS (Teflon Disc)
Conforms to: MSS SP-80. Type 1, Class 125, MATERIAL LIST
504
Threaded Ends NO. PART MATERIAL SPECIFICATION
MATERIAL LIST 1 Body Bronze ASTM B 62
NO. PART MATERIAL SPECIFICATION 2 Bonnet Bronze ASTM B 62
1 Body Bronze ASTM B 62 3 Disc TFE
2 Bonnet Bronze ASTM B 62 4 Stem Bronze ASTM B 62
3 Disc Bronze ASTM B 62 ASTM B 16
4 Stem Bronze ASTM B 62 5 Disc Holder Bronze 1/4" to 3/4"
ASTM B 62
ASTM B 16
1" to 3" Incl.
5 Disc Ring Bronze 3/4” to 2”
Union Bonnet
ASTM B 62 6 Bronze ASTM B 62
Nut
2-1/2” and 3”
7 Packing Graphite Commercial
6 Packing Graphite Commercial
8 Gland Bronze ASTM B 16
7 Packing Nut Bronze Commercial
9 Packing Nut Bronze Commercial
8 Handwheel Mall. Iron Commercial
10 Disc nut Bronze Commercial
9 Identification Aluminum Commercial
Plate 11 Handwheel Malleable Iron Commercial
10 Handwheel Nut Bronze Commercial Identification
12 Aluminum Commercial
Plate
11 Gland Bronze ASTM B 16
(not shown) 2-1/2” & 3” only 13 Handwheel Nut Bronze Commercial
DIMENSIONS–INCHES DIMENSION–INCHES
SIZE A B C SIZE A B C
1/4 3/4 3-1/16 2 1/4 1-1/6 3-15/16 2
3/8 29/32 3-3/16 2 3/8 1-3/16 4-1/4 2
1/2 1 3-5/8 2-1/4 1/2 1-3/16 5-1/8 2-1/2
3/4 1-1/4 3-15/16 2-1/2 3/4 1-7/16 5-3/16 2-3/4
1 1-7/16 4-3/8 2-3/4 1 1-3/4 6-9/16 3-1/8
1-1/4 1-11/16 5-3/16 3-1/8 1-1/4 2-1/16 6-1/4 3-1/2
1-1/2 1-13/16 5-3/4 3-1/2 1-1/2 2-1/4 7-5/8 4
2 2-3/16 6-3/4 4 2 2-3/4 8-7/8 4-3/4
2-1/2 3 8-5/8 4-3/4

MILITARY SPECIFICATIONS
509 Conforms to: MSS SP-80.
Check Valve Figure 509 Check Valve Figure 515 & (WW-V-51 for Type IV, Class A,
125 lb. SWP / 200 lb. WOG 150 lb. SWP / 300 lb. WOG 515 End Connection 1).
Horizontal Swing Type Horizontal Swing Type MATERIAL LIST
Bronze Disc / Threaded Ends NO. PART MATERIAL SPECIFICATION
Bronze Disc / Threaded Ends
1 Body Bronze ASTM B 62
2 Cap Bronze ASTM B 62
Commercial
St. Steel
3 Lever 1/4" to 2" Incl.
ASTM B 62
Bronze
2-1/2" and 3"
ASTM B 16
4 Disc Bronze 1/4" to 3/4" Incl.
ASTM B 62
1" to 3" Incl.
5 Pin Bronze ASTM B 16
6 Plug (not shown) Bronze ASTM B 16
71 Washer Bronze Commercial
81 Disc Nut Bronze Commercial
9 Retaining Ring St. Steel Commercial
1
Used on 2-1/2" and 3" sizes only
DIMENSIONS–INCHES
SIZE A B
1/4 2-1/8 1-7/16
3/8 2-1/8 1-7/16
1/2 2-5/16 1-7/16
3/4 2-5/8 1-11/16
1 3-1/4 2
1-1/4 3-9/16 2-1/8
1-1/2 4 2-3/8
2 4-3/4 2-13/16
2-1/2 6 3-5/8
3 6-7/8 4-3/16

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
322 4/30/06 9:36 PM Page 1

328-06

MILWAUKEE VALVE CO.


Check Valve Figure #508 Check Valve Figure #548T
200 lb. SWP / 400 lb. WOG 250 lb. WOG
Y Pattern Swing Style / Bronze Disc In-Line Spring Loaded Check
Threaded Ends TFE Disc / Threaded Ends

MILITARY SPECIFICATIONS DIMENSIONS–INCHES


Conforms to: MSS SP-80. Type 3, Class 200,
508
Threaded Ends
SIZE A B Weight
MATERIAL LIST
3/8 1-7/32 1-31/32
NO. PART MATERIAL SPECIFICATION 1/2 1-7/32 2-3/32 .44
1 Body Cast Bronze ASTM B 61 3/4 1-1/2 2-5/16 .57
2 Cap Cast Bronze ASTM B 61 1 1-29/32 2-21/32 .89
3 Disc Cast Bronze ASTM B 61 1-1/4 2-5/32 3-3/32 1.28
4 Lever Cast Bronze ASTM B 61 1-1/2 2-19/32 3-5/16 1.72
5 Pin St. Steel Commercial 2 3-1/8 3-25/32 2.58
6 Plug Rod Brass ASTM B 16
7 Disc Nut Rod Brass ASTM B 16
DIMENSIONS–INCHES
SIZE A B MATERIAL SPECIFICATION
1/4 2-1/4 1-5/8 1 Body Cast Bronze ASTM B584, C84400
3/8 2-1/4 1-5/8 2 Tail Piece Cast Bronze ASTM B584, C84400
1/2 2-5/8 1-3/4 3 Disc Buna
3/4 3 1-15/16 4 Disc Holder Cast Bronze ASTM B584, C85700
1 3-11/16 2-1/2
5 Spring Bronze ASTM B103, C52100
1-1/4 4-3/8 3
1-1/2 4-5/8 3-5/16
2 5-7/8 4

2974 Swing Check Valve


Ductile Iron Body, 125 lb. Flanged Ends
Bronze Trim

Check Valve Figure #1800


Wafer Style Silent Check Valve
125 / 250 lb. Flanged Ends
Cast Iron Body / Bronze Disc
*Also Available in Wafer Style Part #1400

MATERIAL LIST
No. Description Material
1 Body Cast Iron
2 Seat Bronze MATERIAL LIST
3 Plug Bronze NO. DESCRIPTION MATERIAL & SPECIFICATION
4 Spring Stainless Steel 1 Bolt Steel
5 Bushing Bronze 2 Identification Plate Aluminum
6 Screw Stainless Steel Cast Iron ASTM A 126,
3 Bonnet
Flange Dimensions Class B
Conform to ANSI
Standards 4 Body Gasket Graphite Non-Asb. Fibers
ANSI CLASS 125 ANSI CLASS 250 5 Nut Steel
Model Weight Model Weight 6 Side Plug Brass ASTM B 16
Size No. Lbs. A B Size No. Lbs. A B 7 Hanger Pin Brass ASTM B 16
2-1/2 1825 24 5-1/2 1 2-1/2 1875 30 5-1/2 1 Cast Iron ASTM A 126,
3 1803 29 6 1-3/8 3 1853 36 6 1-3/8 8 Hanger
Class B
4 1804 42 7-1/4 1-3/4 4 1854 59 7-1/4 1-3/4 9 Disc Nut Brass ASTM B 16
5 1805 52 8-1/2 2 5 1855 78 8-1/2 2
101 Disc Cast Bronze ASTM B 62
6 1806 73 9-3/4 2-1/2 6 1856 103 9-3/4 2-1/2
11 Seat Ring Cast Bronze ASTM B 62
8 1808 126 12-1/2 3-1/4 8 1858 179 12-1/2 3-1/4
Cast Iron ASTM A 126,
10 1810 205 15-1/2 4-1/4 10 1860 253 15-1/2 4-1/4 12 Body
Class B
12 1812 306 14-1/4 NA 12 1862 401 14-1/4 NA 1
Sizes 5" through 12" have cast iron with bronze disc face
14 1814 380 15-3/4 NA 14 1864 511 15-3/4 NA
rings
16 1816 501 17-5/8 NA 16 1866 697 17-5/8 NA
18 1868 959 18-3/4 NA
DIMENSIONS–INCHES
18 1818 724 18-3/4 NA
20 1820 890 20-5/8 NA 20 1870 1180 20-5/8 NA VALVE SIZE
24 1824 1220 24 NA 24 1874 1680 24 NA DIM. 2 2-1/2 3 4 5 6 8 10 12
30 1830 2000 29-1/4 NA 30 1880 2375 29-1/4 NA A 8 8-1/2 9-1/2 11-1/2 13 14 19-1/2 24-1/2 27-1/2
36 1836 4421 45 NA 36 1886 5511 45 NA B 4-9/16 5-3/8 5-9/16 6-11/16 7-3/4 9-1/2 10-3/8 12 13-1/2
42 1842 7203 50 NA 42 1892 8663 50 NA C 6 7 7-1/2 9 10 11 13-1/2 16 19
D 3/4 11/16 3/4 15/16 15/16 1 1-1/8 1-3/16 1-1/4
NOTE: Valve sizes 3" thru 10" will mate up to wafer style butterfly valve without the
use of spool pieces or other adapters. (See “B” dimension for allowable clearance.)

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
323 4/30/06 9:37 PM Page 1

329-06

MILWAUKEE VALVE CO.


3882-M NRS GATE VALVE
Cast / Ductile Iron Body
150# Flanged Ends
Non Rising Stem, Bronze Trim
Sizes 2” - 12”
MATERIAL &
NO. DESCRIPTION
SPECIFICATION
1 Handwheel Nut Steel, Commercial
2 Identification Plate Aluminum, Commercial
3 Handwheel Cast Iron, ASTM A126,
Class B
4 Stem Brass, ASTM B16
Alloy C36000
5 Gland Follower Nut Steel, Commercial
6 Gland Follower Ductile Iron, ASTM A536,
Grade 65-45-12
7 Gland Follower Bolt Steel, Commercial
8 Packing Gland Brass, ASTM B16
Alloy C36000
9 Stuffing Box Ductile Iron, ASTM A536,
Grade 65-45-12
10 Packing Graphite w/synthetic fibers
11 Stuffing Box Gasket
12 Bonnet Ductile Iron, ASTM A536,
Grade 65-45-12
13 Body Bolt Steel, ASTM A307, Grade B
14 Body Gasket Graphite w/synthetic fibers
15 Body Nut Steel, ASTM A307, Grade B
VALVE SIZE (inches) 16 Wedge Bushing Brass, ASTM B16,
DIM. Alloy C36000
2 2-1/2 3 4 5 6 8 10 12
17 Seat Ring Bronze, ASTM B62,
A 7 7-1/2 8 9 10 10-1/2 11-1/2 13 14
18 Wedge Face Ring Alloy C83600
B 11 12-1/2 13-1/8 15-1/4 17-13/16 19-3/4 25 28-15/16 34-7/16 19 Wedge Ductile Iron, ASTM A536,
ØC 7 7 8 10 12 12 14 16 18 20 Body Grade 65-45-12
ØD 6 7 7-1/2 9 10 11 13-1/2 16 19 21 Stuffing Box Nut Steel Commercial
E 5/8 11/16 3/4 15/16 15/16 1 1-1/8 1-3/16 1-1/4 (not shown)

3974-M SWING CHECK VALVE


Ductile Iron Body
150# Flanged Ends , Bronze Trim

No. DESCRIPTION MATERIAL &


SPECIFICATIONS
1 Bolt Steel, ASTM A307, Grade B
2 Identification Plate Aluminum, Commercial
3 Bonnet Ductile Iron, ASTM A 536,
Grade 65-45-12
4 Body Gasket Graphite w/synthetic fibers
5 Nut Steel, ASTM A307, Grade B
6 Side Plug Brass, ASTM B16, Alloy
7 Hanger Pin C36000
8 Hanger Ductile Iron, ASTM A536,
Grade 65-45-12
9 Disc Nut Steel, ASTM A307, Grade B
DIM . 2 2-1/2 3 4 6 8 10 12 10 Disc Ductile Iron, ASTM A 536,
DN DN50 DN65 DN80 DN100 DN150 DN200 DN250 DN300 Grade 65-45-12*
A 8.00 8.50 9.50 11.50 14.00 19.50 24.50 27.50 11 Seat Ring Bronze, ASTM B62, Alloy
203.2 215.9 241.3 292.1 355.6 495.3 622.3 698.5 C83600
3.94 4.50 5.13 6.13 8.00 9.44 12.07 16.13 Ductile, ASTM A536,
B 12 Body
100.1 114.3 130.3 155.7 203.2 239.8 306.6 409.7
Grade 65-45-12
6.00 7.00 7.50 9.00 11.00 13.50 16.00 19.00
ØC
152.4 177.8 190.5 228.6 279.4 342.9 406.4 482.6 *All models use a BRONZE, ASTMB62, Alloy C83600 disk face ring
0.63 0.69 0.75 0.94 1.00 1.13 1.19 1.25
D 15.9 17.5 19.1 23.8 25.4 28.6 30.2 31.8

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
324 4/30/06 9:38 PM Page 1

330-06

MILWAUKEE VALVE CO.


Ball Valve Figure #BA-100 Ball Valve Figure #BA-150
150 lb. SWP / 600 lb. WOG 150 lb. SWP / 600 lb. WOG
2 pc. Bronze Body / RPTFE Seats 2 pc. Bronze Body / RPTFE Seats
Threaded Ends Standard Port Design / Lever Handle
Solder Ends
ITEM PART MATERIALS ASTM SPEC.
1 Body Cast Bronze B584 ITEM PART MATERIALS ASTM SPEC.
Brass B16 1 Body Cast Bronze B584
2 Tailpiece Brass B16
Cast Bronze (1” & up) B584 2 Tailpiece
Cast Bronze (1” & up) B584
Brass w/Hard Chrome B16
3 Ball Plating Brass w/Hard Chrome B16
3 Ball Plating
4 Seat RPTFE, 15% Glass Filled
5 Stem Brass B16 4 Seat RPTFE, 15% Glass Filled
6 Thrust Washer RPTFE, 25% Glass Filled 5 Stem Brass B16
7 Packing PTFE 6 Thrust Washer RPTFE, 25% Glass Filled
8 Packing Nut Brass B16 7 Packing PTFE
9 Handle Steel w/Zinc Plating B633 8 Packing Nut Brass B16
10 Hand Grip Vinyl 9 Handle Steel w/Zinc Plating B633
11 Handle Nut Steel w/Zinc Plating B633 10 Hand Grip Vinyl
11 Handle Nut Steel w/Zinc Plating B633
*Also Available with S.S. Ball & Stem BA-100S
*Also Available with S.S. Ball & Stem BA-150S
1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3”
UNITS UNITS
DN6 DN10 DN15 DN20 DN25 DN32 DN40 DN20 DN65 DN80 DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80
A(Dia) INCHES 0.38 0.38 0.51 0.70 0.88 1.07 1.32 1.57 2.00 2.31 A(Dia) INCHES 0.38 0.50 0.70 0.88 1.07 1.32 1.57 2.00 2.31
mm 9.3 9.3 12.5 17.2 21.6 26.2 32.3 38.5 49.0 56.6 mm 9.3 12.3 17.2 21.6 26.2 32.3 38.5 49.0 56.6
B INCHES 1.86 1.86 2.19 2.64 3.17 3.50 3.96 4.30 5.56 6.20 INCHES 2.10 2.39 3.05 3.71 4.54 5.00 6.25 7.34 8.16
mm 45.6 45.6 53.7 64.7 77.7 85.8 97.0 105.4 136.2 151.9 B mm 51.5 58.6 74.7 90.9 111.2 122.5 153.1 179.8 199.9
C INCHES 1.00 1.00 1.10 1.30 1.58 1.74 1.97 2.15 2.79 3.10 INCHES 0.90 1.07 1.56 1.76 2.27 2.50 3.13 3.67 4.07
mm 24.5 24.5 27.0 31.9 38.7 42.6 48.3 52.7 68.4 76.0 C mm 22.1 26.2 38.2 43.1 55.6 61.3 76.7 89.9 99.7
D INCHES 1.78 1.81 1.91 2.08 2.25 2.66 2.84 3.00 3.47 3.90 INCHES 1.80 1.89 2.13 2.29 2.67 2.85 3.02 3.47 3.88
mm 43.6 44.3 46.8 51.0 55.1 65.2 69.6 73.5 85.0 95.6 D mm 44.1 46.3 52.2 56.1 65.4 69.8 74.0 85.0 95.1
E INCHES 3.81 3.81 3.81 4.56 4.56 6.31 6.31 7.19 7.19 7.19 INCHES 3.81 3.81 4.56 4.56 6.31 6.31 7.19 7.19 7.19
mm 93.3 93.3 93.3 111.7 111.7 154.6 154.6 176.2 176.2 176.2 E mm 93.3 93.3 111.7 111.7 154.6 154.6 176.2 176.2 176.2
F THREAD 1/4” 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2’" 2-1/2" 3" TUBE
SIZE NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT F .51 .63 .88 1.13 1.38 1.63 2.13 2.63 3.13
SIZE Ø
Cv 7 7 13 25 38 61 87 121 228 305 Cv 7 13 25 38 61 87 121 228 305

Ball Valve Figure #BA-300 Ball Valve Figure #BA-350


150 lb. SWP / 600 lb. WOG 150 lb. SWP / 600 lb. WOG
3 pc. Bronze Body / RPTFE Seats 3 pc. Bronze Body / RPTFE Seats
Full Port Design / Lever Handle Full Port Design / Lever Handle
Threaded Ends Solder Ends
ITEM PART MATERIALS ASTM SPEC. ITEM PART MATERIALS ASTM SPEC.
1 Body Bronze B584 1 Body Bronze B584
2 End Cap Bronze B584 2 End Cap Bronze B584
3 Stem Brass B16 3 Stem Brass B16
4 Packing Nut Brass B16
4 Packing Nut Brass B16 5 Packing PTFE
5 Packing PTFE RPTFE (25%
6 Thrust Washer
RPTFE (25% Glass Reinforced)
6 Thrust Washer
Glass Reinforced) 7 Ball CP Brass B16
7 Ball CP Brass B16 RPTFE (15%
8 Seats
8 Seat RPTFE (15% Glass Reinforced)
Glass Reinforced) 9 Handle Steel w/Zinc Plating B633
9 Handle Steel w/Zinc Plating B633 10 Handle Nut Steel w/Zinc Plating B633
10 Handle Nut Steel w/Zinc Plating B633 11 Handle Grip Vinyl
11 Handle Grip Vinyl Steel (Gr8)
12 Body Bolts B633
12 Bolt Steel w/Zinc Plating B633 w/Zinc Plating
13 Nut Steel w/Zinc Plating B633 Steel (Gr8)
13 Body Nuts B633
w/Zinc Plating
*Also available with S.S. Ball & Stem BA-300S
*Also available with S.S. Ball & Stem BA-350S

1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
UNITS UNITS
DN6 DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN15 DN20 DN25 DN32 DN40 DN50
A(Dia) INCHES 0.50 0.50 0.50 0.75 1.00 1.25 1.50 2.00 A(Dia) INCHES 0.5 0.75 1 1.25 1.5 2
mm 13 13 13 19 25 32 38 51 mm 13 19 25 32 38 51
B INCHES 1.96 1.96 2.80 3.44 3.87 4.75 5.25 6.10
B INCHES 2.80 3.44 3.87 4.75 5.25 6.10
mm 50 50 71 87 98 121 133 155 mm 352 354 356 376 382 391
H INCHES 1.95 1.95 1.95 2.26 2.44 2.80 3.12 3.58
H INCHES 1.95 2.26 2.44 2.8 3.12 3.58
mm 50 50 50 57 62 71 79 91 mm 50 57 62 71 79 91
L INCHES 3.88 3.88 3.88 4.75 4.75 6.50 7.38 7.38
L INCHES 3.88 4.75 4.75 6.5 7.38 7.38
mm 99 99 99 121 121 165 187 187 mm 99 121 121 165 187 187
W INCHES 1.91 1.91 1.91 2.19 2.46 2.98 3.00 4.00
W INCHES 1.91 2.19 2.46 2.98 2.98 4
mm 49 49 49 56 62 76 76 102 mm 49 56 62 76 76 102
F THREAD 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” Cv 17 31 60 110 185 360
SIZE NPT NPT NPT NPT NPT NPT NPT NPT
Cv 7 7 17 31 60 110 185 360

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
325 5/1/06 6:56 PM Page 1

331-06

MILWAUKEE VALVE CO.


200 / 250 lb. WOG Butterfly Valves
H Series Valve / Ductile Iron Body
125/150 Flanged End
Lug Pattern or Wafer Pattern 2" - 12"
Wafer Pattern Lug Pattern

Approved by
U.S. Coast Guard
for use in Category A
service as described in
Title 46 Code of Federal
Regulations 46.20-15.

ITEM PARTS NAME MATERIAL


CAST IRON-ASTM A 126 CL B INCHES 2 2-1/2 3 4 5 6 8 10 12
CAST IRON-EPOXY COATED mm 50 65 80 100 125 150 200 250 300
1 BODY CAST IRON-NYLON COATED INCHES 1.69 1.81 1.81 2.07 2.19 2.19 2.38 2.69 3.19
DUCTILE IRON-ASTM A536 A (Body) mm 42.9 46.1 46.0 52.5 55.6 55.6 60.3 68.3 81.0
DUCTILE IRON-EPOXY COATED INCHES 1.82 1.94 1.94 2.20 2.32 2.31 2.51 2.82 3.32
DUCTILE IRON-NYLON COATED A1 (Liner) mm 46.1 49.1 49.1 55.8 58.8 58.7 63.6 71.5 84.2
NP DUCTILE IRON-ASTM A 536 INCHES 5.50 6.00 6.25 7.00 7.53 8.00 9.38 10.19 12.06
B
2 DISC ALUMINUM BRONZE-ASTM B 148 mm 139.7 152.4 158.8 177.8 191.3 203.2 238.1 258.8 306.4
STAINLESS STEEL-TYPE 316 INCHES 3.06 3.31 3.75 4.25 4.94 5.56 6.56 7.88 9.25
C
BOTTOM STAINLESS STEEL TYPE 416 mm 77.8 84.1 95.3 108.0 125.4 141.3 166.7 200.0 235.0
3 INCHES 1.49 2.01 2.64 3.67 4.71 5.66 7.72 9.70 11.68
STEM STAINLESS STEEL TYPE 316 D (Chord Dia)
STAINLESS STEEL TYPE 416 mm 37.8 51.1 67.1 93.2 119.6 143.8 196.1 246.4 296.7
4 TOP STEM INCHES 0.28 0.44 0.69 1.06 1.50 1.94 2.84 3.69 4.50
STAINLESS STEEL TYPE 316 D1 (Intrusion) mm 7.1 11.1 17.5 27.0 38.1 49.2 72.2 93.7 114.3
5 TOP BEARING THERMOPLASTIC POLYMER
E INCHES 4.13 4.88 5.38 6.88 7.75 8.75 11.00 13.38 16.13
6 SEAL EPDM, BUNA, VITON (1)
Wafer Only mm 104.8 123.8 136.5 174.6 196.9 222.3 279.4 339.7 409.6
BUNA
INCHES 1.13 1.13 1.13 1.13 1.13 1.13 1.50 1.50 1.50
EPDM F mm 28.6 28.6 28.6 28.6 28.6 28.6 38.1 38.1 38.1
VITON INCHES 0.81 0.81 0.81 0.81 0.81 0.81 1.06 1.06 1.06
7 LINER VITON-GFLT G mm 20.6 20.6 20.6 20.6 20.6 20.6 27.0 27.0 27.0
HYPALON INCHES 0.35 0.35 0.35 0.40 0.40 0.40 0.53 0.71 0.71
NEOPRENE BLACK-FDA H mm 8.9 8.9 8.9 10.2 10.2 11.2 13.5 18.0 18.0
NEOPRENE WHITE-FDA INCHES 0.50 0.50 0.50 0.56 0.56 0.62 0.75 1.00 1.00
J
8 ROLL PIN STAINLESS STEEL mm 12.6 12.6 12.6 14.2 14.2 15.8 19.0 25.4 25.4
9 STEM SEAL EPDM, BUNA, VITON(1) K 4 4 4 4 4 4 6 6 6
LOWER INCHES 0.44 0.44 0.44 0.44 0.44 0.44 0.56 0.56 0.56
10* THERMOPLASTIC POLYMER L
BEARING mm 11.1 11.1 11.1 11.1 11.1 11.1 14.3 14.3 14.3
LEVER HANDLE INCHES 3.25 3.25 3.25 3.25 3.25 3.25 5.00 5.00 5.00
M
EPOXY COATED LEVER mm 82.6 82.6 82.6 82.6 82.6 82.6 127.0 127.0 127.0
GEAR OPERATOR INCHES 0.44 0.44 0.44 0.44 0.44 0.44 0.50 0.50 0.50
N mm 11.1 11.1 11.1 11.1 11.1 11.1 12.7 12.7 12.7
GEAR OP W/MEMORY STOP
INCHES 4.75 5.50 6.00 7.50 8.50 9.50 11.75 14.25 17.00
11 OPERATOR GEAR OP W/LOCK P mm 120.7 139.7 152.4 190.5 215.9 241.3 298.5 362.0 431.8
ACTUATOR-AIR/AIR
R 5/8-11 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 7/8-9 7/8-9
ACTUATOR-AIR/SPRING
S 2 2 2 2 2 2 2 4 4
ACTUATOR-ELECTRIC
(1) Viton O-rings are used with Hypalon. Neoprene and
Teflon liners. *Provided on 8”, 10”, 12”. Operators: Locking Lever Handle
Body Options: Cast Iron or Ductile Iron Gear Operator
Disc Options: NP Ductile Iron, Al/Bronze, 316 SS Locking Gear
Liner Options: EPDM, Buna, Viton, Viton GFLT (Hi Temp.), Salt Water Gears
Hypalon, TFE, Neoprene Submerged Gears
Actuators

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
326 5/1/06 7:00 PM Page 1

332-06

MILWAUKEE VALVE CO.


HP SERIES HIGH PERFORMANCE BUTTERFLY VALVES

MOUNTING
(2-1/2” - 8”)

MOUNTING
(10” - 24”)

Meets USCG Category B requirements.

150 CLASS Dimensions Mounting Flange Stem Connection Weight (lbs) Flange Data
Valve A B C D E F G H S K L Bare Stem J
Size Height Height Stem Lg. Stem Dia. Face Width Width Fastener Square Key Length Wafer Lug Qty Fastener
2.5 Lug 7.25 11.22 1.63 0.625 1.875 2.30 2.30 1/4- 20 0.46 1.00 12 4 5/8- 11
3 7.25 11.22 1.63 0.625 1.875 2.30 2.30 1/4- 20 0.46 1.00 12 14 4 5/8- 11
4 7.81 12.59 1.63 0.625 2.125 2.30 2.30 1/4- 20 0.46 1.00 16 21 8 5/8- 11
5 Lug 9.38 15.22 1.69 0.875 2.125 3.00 3.00 3/8- 16 0.64 1.00 36 8 3/4- 10
6 9.38 15.22 1.69 0.875 2.250 3.00 3.00 3/8- 16 0.64 1.00 31 36 8 3/4- 10
8 11.38 19.22 1.86 1.125 2.625 3.36 3.36 1/2- 13 0.250 1.50 50 60 8 3/4- 10
10 Lug 12.38 20.75 1.82 1.125 2.812 3.36 3.36 1/2- 13 0.250 1.50 106 12 7/8- 9
10 8.63 16.50 3.72 1.125 2.812 3.88 1.38 1/2- 13 0.250 1.50 73 12 7/8- 9
12 Lug 11.62 21.72 5.50 1.375 3.188 3.88 2.00 1/2- 13 0.312 1.50 151
12 11.62 20.34 5.50 1.375 3.188 3.88 2.00 1/2- 13 0.312 1.50 124 12 7/8- 9
14 12.00 23.09 6.00 1.500 3.625 4.50 2.00 1/2- 13 0.375 1.50 139 205 12 1- 8
16 14.00 26.84 6.00 2.000 4.000 5.75 2.50 1/2- 13 0.500 2.38 219 283 16 1- 8
18 15.00 29.09 6.00 2.250 4.500 5.75 2.50 1/2- 13 0.500 2.38 314 395 16 1-1/8- 8
20 17.00 32.50 6.00 2.500 5.000 6.00 4.00 1/2- 13 0.750 2.50 350 434 20 1-1/8- 8
24 19.50 37.88 6.50 3.000 6.062 6.00 4.00 3/4- 10 0.750 2.50 535 773 20 1-1/4- 8

300 CLASS Dimensions Mounting Flange Stem Connection Weight (lbs) Flange Data
Valve A B C D E F G H S K L Bare Stem J
Size Height Height Stem Lg. Stem Dia. Face Width Width Fastener Square Key Length Wafer Lug Qty Fastener
2.5 Lug 7.25 11.88 1.63 0.625 1.875 2.30 2.30 1/4- 20 0.46 1.00 17 8 3/4- 10
3 Lug 7.25 11.88 1.63 0.625 1.875 2.30 2.30 1/4- 20 0.46 1.00 19
3 7.25 11.25 1.63 0.625 1.875 2.30 2.30 1/4- 20 0.46 1.00 12 8 3/4- 10
4 7.81 12.59 1.63 0.625 2.125 2.30 2.30 1/4- 20 0.46 1.00 16 24 8 3/4- 10
5 Lug 9.38 15.22 1.69 0.875 2.125 3.00 3.00 3/8- 16 0.64 1.00 36 8 3/4- 10
6 Lug 9.38 16.25 1.69 0.875 2.310 3.00 3.00 3/8- 16 0.64 1.00 50
6 9.38 15.22 1.69 0.875 2.310 3.00 3.00 3/8- 16 0.64 1.00 31 12 3/4- 10
8 11.38 19.22 1.86 1.125 2.875 3.36 3.36 1/2- 13 0.250 1.50 52 76 12 7/8- 9
10 10.81 19.75 5.50 1.375 3.250 3.88 2.00 1/2- 13 0.312 1.50 93 134 16 1- 8
12 11.62 22.53 5.50 1.500 3.625 4.50 2.00 1/2- 13 0.375 1.50 141 191 16 1-1/8- 8
14 13.50 26.09 6.00 2.000 4.625 5.75 2.50 1/2- 13 0.500 2.38 221 333 20 1-1/8- 8
16 15.00 29.09 6.00 2.250 5.250 5.75 2.50 1/2- 13 0.500 2.38 290 430 20 1-1/4- 8

HOW TO ORDER HP SERIES HIGH PERFORMANCE BUTTERFLY VALVES


ANSI Body Body Disc Stem Seat Stem
Series Class Style Material Material Material Material Packing Operator Ext. Options Size
XX X X X X X X X X XX XXX
HP 1-150 L-Lug C-WCB S-CF8M 4-17-4-SS 1-PTFE 1-PTFE 1-Bare Stem A-Assemble Dry 020-240
3-300 W-Wafer S-CF8M 3-316 SS 2-RPTFE G-Graphite 2-Lever O-Oxygen Clean
4-UHMWPE 3-Gear OP
4-Elect
5-Pneumatic
Part Number Example: HP1LCS4111 040 = 4 inch, high performance, class 150, lug pattern, carbon steel body, 17-4 stem, PTFE seat, PTFE packing, bare stem with no ext options

See our ad on Please consult


page 1330 for factory for the
ANSI Flange gate, closest dealer
globe, check, and MILWAUKEE VALVE or to order a
hose valves. TEL: 262-432-2700 • FAX: 262-432-2804 full-line catalog.
E-Mail: info@milwaukeevalve.com • WEB: www.milwaukeevalve.com
0359-03 5/1/06 7:01 PM Page 1

333-06

PISTON VALVES – Fig. Nos. 1039, 1040 & 1053


For use where volatile fluids & gases are
encountered, and particularly on heat
transfer media. Also suitable for use on
fuel oils, alkalis, weak acids, steam and
high pressure hot water.

Max. Temp. Max. Press. psi


°F °C ANSI ANSI
150 300
100 38 285 740
200 93 260 675
300 149 230 655
400 205 200 635
500 260 170 600
600 315 140 550
650 343 125 535

Nom. Piston Flange Dimensions Mat Wt. Fig. ANSI


Bolted Bonnet Size Dia mm D b # Bolts f a L H h V L lbs. No. Rating
Flanged ANSI 150 & 300 2" 40 6.00 0.75 4 0.75 4.75 8.0 8.19 2.17 7.87 F 33.0 1053 150
RF to ANSI B16.5 3" 70 7.50 0.94 4 0.75 6.00 9.5 8.74 2.28 11.81 F 68.2 1053 150
End-to-end dimensions to 4" 90 9.00 0.94 8 0.75 7.50 11.5 10.43 2.95 11.81 F 101.2 1053 150
ANSI B16.10 (Globe) 6" 130 11.00 1.00 8 0.88 9.50 16.0 13.27 3.86 15.75 F 220.0 1053 150
Body: 2"–6" Cast Steel 1/2" 15 3.75 0.56 4 0.62 2.62 6.0 4.64 1.10 3.93 FS 6.6 1039 300
ASTM A216 WCB
3/4" 20 4.62 0.62 4 0.75 3.25 7.0 5.51 1.26 4.53 FS 11.0 1039 300
Stem: Carbon Steel
Piston: Stainless Steel 1" 25 4.88 0.69 4 0.75 3.50 8.0 6.38 1.38 4.92 F 15.4 1039 300
2" Cr 18 Mo2 1-1/2" 40 6.12 0.81 4 0.88 4.50 9.0 8.19 2.16 6.89 F 30.8 1039 300
3"–6" Cr 30 Mo2 2" 50 6.50 0.88 8 0.75 5.00 10.5 9.25 2.36 7.87 F 42.24 1039 300
3" 80 8.25 1.12 8 0.88 6.62 12.5 14.76 3.15 11.81 F 104.28 1040 300
Fig.1040 Supplied with balanced piston
4" 100 10.00 1.25 8 0.88 7.88 14.0 16.53 3.74 13.78 F 160.6 1040 300
6" 150 12.50 1.44 12 0.88 10.62 17.5 20.86 4.92 15.75 F 303.6 1040 300

DOUBLE PLATE WATER LEVEL GAUGES


SLEEVE-PACKED, FULL BORE,
with LVQ Shut-Off Cocks
FORGED STEEL FLANGED COCKS
For working pressures: Type T - 500 psi;
3/8" to 1-1/4" Bore
Type TB - 1000 psi; Type TH - 2000 psi
Working pressure: Steam Hydraulic
Forged Steel 850 psi 1,200 psi
Bronze 250 psi 500 psi

Maximum working temperature: 800°F

Distance
Between Flange Diameter Handle Weight
Flanges (L) Height Length
Size Bore Bronze FS BST BST BST H C Bronze Forged
"H" "K" "S" Steel
A.B. 18 5/16 4 5-1/2 4-1/2 4-1/2 5 5-3/8 4-1/4 – –
A.B. 22 3/8 4-1/2 5-1/2 4-1/2 4-1/2 5 – 5-1/4 8-3/4 9-1/2
A.B. 28 1/2 4-1/2 5-1/2 4-1/2 4-1/2 5 6 7 10 12
A.B. 32 5/8 – 6 One 4-3/4 dia. & 6-3/4 7 – 12-1/2
one oval
A.B. 40 3/4 5-1/2 *6 4-1/2 4-1/2 5 7 9 14-1/2 17
A.B. 50 1 6 *7 4-3/4 5 5-1/2 7-3/4 9-1/2 19 28
A.B. 50 1-1/4 6 *7 or 10 5-1/4 5-1/4 5-3/4 7-3/4 9-1/2 24-3/4 34-1/ 2
Dimensions in inches; weight in pounds.
* With BST "S" Flanges overall lengths for A.B. 40 and A.B. 50 are 6-1/4 and 7-1/4, respectively.
Note: Cocks can also be supplied with A.S.A. flanges.
Forged steel cocks are fitted with stainless steel plugs and tightening nuts. Section elevation of T.VIII Type T.VIII Double Plate
Bronze cocks are fitted with bronze plugs, unless otherwise specified. Type Gauge with Illuminator Water Level Gauge

3901 NE 12th Avenue


Pompano Beach, FL 33064 H. S. WHITE CO., INC. Call Toll Free for a
Copy of Our Catalog!
Phone: (954) 785-6760 TOLL FREE: (800) 327-8575
Miami: (305) 940-2700 FAX: (954) 785-8247 www.marinesupplies.net
328 5/1/06 7:02 PM Page 1

334-06

ELECTRIC VALVE ACTUATORS


L120 Series

When ordering please specify:


• Valve Type (Gate, Globe, Ball)
• Operating Conditions
• Voltage
• Operation (Open/Close, Modulating)
• Type of Control (Dry Contact, Analog, Digital)
• Feedback Requirements
• Indication Requirements (Limit Switches,
Local Indication)
• Cycle Time (Full Close to Full Open)

L120 Electric Actuators provide positive, dependable valve actuation. Whether used with gate and
globe valves, penstocks, or sluice gates, these actuators operate without modification in any rising or
non-rising stem application for linear-action valves. When combined with a quarter-turn gear
operator, they can also be used to control butterfly, ball, and plug valves.

L120 Series Performance (3-phase-50Hz / 380, 400, and 415 Volt – 60Hz / 230, 450, and 575 Volt)
Maximum Torque Capacity Maximum Thrust Capacity Output Speed Range (RPM)
Unit Ft.-Lbs. NM Lbs. Kg 60Hz 50Hz
L120-10 100 136 10,000 4,500 12-250 10-210
L120-20 200 272 20,000 9,000 12-250 10-210
L120-40 400 544 30,000 13,500 24-250 20-210
L120-85 850 1,156 45,000 20,250 24-192 20-160
L120-190 1,900 2,584 75,000 33,750 24-196 20-160
L120-420 4,200 5,712 140,000 63,000 19-196 16-165
L120-800 8,000 10,880 250,000 112,500 12-168 10-140
L120-2000 20,000 27,200 500,000 225,000 12-60 10-50

Valve Automation & Controls


Limitorque® A W & O Supply Company
2390 Boswell Rd., Ste. 400, Chula Vista, CA 91914
Multi-Turn Electric Valve Tel: 800-962-9696 • 619-656-7240
Actuators Available from Fax: 619-421-7518 • www.valveauto.com
jacksonville.fl@wosupply.com
329 5/1/06 7:03 PM Page 1

335-06

PNEUMATIC VALVE ACTUATORS


These pneumatic actuators can automate valves with torque values from 25 to 500,000 in-lb. They are made in a wide range of materials
suitable for use in the most demanding applications. They are available with a variety of NAMUR controls and accessories, including
lockout modules and gear overrides, to meet customer’s specifications.

B-Series Rack and Pinion Actuators


Designed for butterfly, plug or ball valves, these actuators offer one compact design for double acting and spring return. Precision die-
cast pistons with large cylinder bearings increase efficiency and cycle life. Available in torque ranges from 25 in-lb. to 58,000 in-lb., for
optimum actuator sizing.

Model ISO A B B1 C C1 D E F G H J K L M1, 2 N O P Q R Weights (LBS.) Volume (IN.) Cycle Time


DA & SR 180 SQ. SQ NPT DA SR CW CCW CW CCW
B050 F04S11E 6.69 8.70 1.169 N/A #10-24x.31 N/A .433 .47 2.56 1/8 1.58 1.14 1.181 3.150 #10-24 .47 .394 .75 .79 .39 2.7 3.1 8.2 5.4 .5 .5
B063 F03/F05S14E 7.95 9.92 1.392 1.002 1/4-20x.31 #10-24x.31 .551 .63 3.19 1/8 1.77 1.40 1.181 3.150 #10-24 .47 .394 .88 .79 .39 3.8 4.4 16 10 .5 .5
B085 F05/F07S17E 9.84 12.13 1.949 1.392 5/16-18x.31 1/4-20x.31 .669 .75 4.15 1/8 2.24 1.87 1.181 3.150 #10-24 .77 .551 1.00 .79 .55 7.5 9.3 34 20 .5 .5
B100 F05/F07S17E 11.65 14.80 1.949 1.392 5/16-18x.31 1/4-20x.31 .669 .75 4.80 1/4 2.48 2.17 1.181 3.150 #10-24 .77 .551 1.38 .79 .55 11.5 14.6 56 38 1 .5
B115 F07/F10S22E 13.47 17.60 2.840 1.949 3/8-16x.39 5/16-18x.31 .866 .98 5.30 1/4 2.91 2.46 1.181 5.118 #10-24 1.10 .787 1.63 1.18 .79 17.7 22.5 94 65 1 1
B125 F07/F10S22E 15.83 20.35 2.840 1.949 3/8-16x.39 5/16-18x.31 .866 .98 5.79 1/4 3.07 2.68 1.181 5.118 #10-24 1.10 .787 2.00 1.18 .79 23.8 30.2 128 90 1 1
B150 F10/F12S27E 19.13 25.20 3.480 2.840 1/2-13x.45 3/8-16x.39 1.063 1.18 6.85 1/4 3.47 3.19 1.181 5.118 #10-24 1.87 1.417 2.38 1.18 .89 40.8 51.2 224 159 2.0 1.5
B175 F10/F14S36E 21.34 28.58 3.897 2.840 5/8-11x.63 3/8-16x.39 1.417 1.57 8.21 1/4 4.17 3.74 1.181 5.118 #10-24 1.87 1.417 2.75 1.18 .89 63.7 77.2 351 232 3.0 2.0
B200 F10/F14S36E 24.41 31.69 3.897 2.840 5/8-11x.63 3/8-16x.39 1.417 1.57 9.39 1/4 4.72 4.25 1.181 5.118 #10-24 1.97 1.417 2.94 1.18 .89 91.5 118 507 332 4.5 3.0

Note: Double Acting – Pressure at port “CW” will result in clockwise rotation. Pressure at port “CCW” will result in counter-clockwise rotation.
Note: Spring Return – Pressure at port “CCW” will result in counterclockwise rotation. Springs provide clockwise rotation upon loss of pressure.

When ordering please specify: • Supply Air Pressure • Control Signal (For Modulating Valves)
• Valve Type (Ball, Butterfly) & Manufacturer • Fail Position (Valve open or closed) • Solenoid Control Voltage (For Open/Close Valves)
• Operating Conditions (Pressure, Temp. & Media) • Operation (Open/Close, Modulating) • Feedback Requirements

SXL-Series Stainless Steel Actuators


The SXL Series utilizes a 316 series stainless steel housing and is suitable for use in corrosive environments. It is available in both
double acting and spring return and can be supplied with internal components identical to the SNA Series or with optional stainless
steel internals. For sanitary applications the housing can be polished. Available in torque ranges from 78 in-lb. to 7279 in-lb.

Model ISO A B C D E F G H J K M O P Q R Weights (LBS.) Volume (IN.) Cycle Time


SQ NPT DA SR CW CCW CW CCW
SXL050 F04S11M 6.69 1.169 M5 X .31 .433 .47 .79 2.56 1/8 1.85 1.18 3.150 .56 .39 .83 .39 4.85 5.15 8.2 5.4 .5 .5
SXL063 F05S14M 7.95 1.392 M6 x .31 .551 .63 .79 2.56 1/8 2.11 1.44 3.150 .56 .39 .91 .39 7.05 7.80 16 10 .5 .5
SXL085 F07S17M 9.84 1.949 M8 x .31 .669 .79 .79 3.94 1/8 2.60 1.87 3.150 .77 .55 1.18 .55 11.24 13.18 34 20 .5 .5
SXL100 F07S17M 11.65 1.949 M8 x .31 .669 .79 .79 4.57 1/4 2.95 2. 3.150 .77 .55 1.46 .55 16.09 19.02 56 38 1 .5
SXL115 F10S22M 13.46 2.840 M10 x .31 .866 .98 1.18 5.16 1/4 3.23 2.46 5.118 1.38 .79 1.77 .79 23.14 27.55 94 65 1 1
SXL125 F10S22M 15.83 2.840 M10 x .31 .866 .98 1.18 6.61 1/4 3.43 2.70 5.118 1.38 .79 2.17 .79 38.14 45.12 128 90 1 1
SXL150 F12S27M 19.13 3.480 M12 x .47 1.063 1.14 1.18 6.61 1/4 3.94 3.19 5.118 1.97 .89 2.64 1.42 51.14 61.50 224 159 2 1.5

Valve Automation & Controls


Automax A W & O Supply Company
2390 Boswell Rd., Ste. 400, Chula Vista, CA 91914
Pneumatic Tel: 800-962-9696 • 619-656-7240
Actuators available from Fax: 619-421-7518 • www.valveauto.com
jacksonville.fl@wosupply.com
330 5/1/06 7:04 PM Page 1

336-06

PILOT-OPERATED SOLENOID VALVES


FOR GENERAL SERVICE
BRASS OR STAINLESS STEEL BODY – 3/8” to 2-1/2” NPT
Series 8210

Features:
• Wide range of pressure ratings, sizes, and
resilient materials provide long service life
and low internal leakage.
• High Flow Valves for liquid, corrosive, and
air/inert gas service.

Valve Parts in Contact with Fluids


Body Brass 304/316
Stainless Steel
Seals and Discs NBR or PTFE
Disc-Holder PA
Core Tube 305 Stainless Steel
Core and Plugnut 430F Stainless Steel
Springs 302 Stainless Steel
Shading Coil Copper Silver

When Ordering, Specify:


• Operation (NO, NC)
• Pipe size or flow requirement
• Material (Brass or Stainless Steel)
Normally • Fluid to be controlled
Open • Maximum operating pressure
• Voltage & frequency
Normally
• Extras (special seals, seats, brackets, etc.)
Closed

MARINE FITTINGS
& FLANGES W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics 3485 Evergreen Ave. • Jacksonville, FL 32206 - Hose Valves
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
331 5/1/06 7:05 PM Page 1

337-06

DIRECT-ACTING SOLENOID VALVES


BRASS OR STAINLESS STEEL BODY – 1/8” to 1/4” NPT
Series 8320
Features:
• All NPT connections are in the valve body to allow
in-line piping.
• No minimum operating pressure differential required.
• Mountable in any position.

3 Way /2 Position Valve Flow Diagrams

8320 Three way valves have three pipe connections and two
1/4” NPT orifices. When one orifice is open, the other is closed,
and vice versa. They are commonly used to alternately
apply pressure to and exhaust pressure from a valve
Valve Parts in Contact with Fluids actuator or a single-acting cylinder.
Body Brass 303 Stainless Steel
Three Types of Operations Apply:
Seals and Discs NBR or Cast UR, as Listed
Normally Closed (NC)
Core Tube 305 Stainless Steel
Core and Plugnut 430F Stainless Steel
When the valve is de-energized, the pressure port is
closed and the exhaust port is connected to the cylinder
Core Springs 302 Stainless Steel port. When the valve is energized, the exhaust port is
Shading Coil Copper Silver closed and the pressure port is connected to the cylinder
Disc-Holder CA port.
Core Guide CA (10.1 and 17.1 Watt only) Normally Open (NO)
When Ordering, Specify: When the valve is de-energized, the pressure port is con-
• Operation: NO, NC, Universal nected to the cylinder port and the exhaust port is closed.
When the valve is energized, the pressure port is closed
• Pipe size or flow requirement
and the cylinder port is connected to the exhaust port.
• Material (brass or stainless steel)
• Fluid to be controlled Universal (Univ)
• Maximum operating pressure This allows the valve to be connected in either the
• Voltage & frequency Normally Closed or Normally Open position ... or to select
• Extras (special seats, seals, brackets, etc.) one of two fluids or to divert flow from one port to another.

MARINE FITTINGS
& FLANGES W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics 3485 Evergreen Ave. • Jacksonville, FL 32206 - Hose Valves
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
0326-04 5/1/06 7:07 PM Page 324

338-06

LUNKENHEIMER VALVES SERVICES


POP SAFETY & RELIEF VALVES

RELIEF VALVES FOR WATER POP SAFETY VALVES POP SAFETY VALVES RELIEF VALVES FOR OIL,
OR NON-FLAMMABLE LIQUIDS FOR GAS FOR STEAM BOILERS GASOLINE AND OTHER LIQUIDS
Fig. 48209960010 – Relief Valve Bronze, Nickel Alloy Seat With Lifting Levers Fig. 48206580015 – Relief Valve
Male Inlet Side Outlet, Male Inlet Side Outlet Top Outlet Bronze, Male Inlet, 3/8" to 3"
Rough Bronze, Side Outlet 1 to 250 lbs. Fig. 48206290013 Fig. 48204330014 Fig. 48202860016 – Relief Valve
Iron Regulating Wheel Bronze, Encased Spring
Fig. 482010450011 – 1/2" to 3" Bronze, Female Inlet, 3/8" to 2"
1 to 250 lbs. 1 to 250 lbs.
Fig. 482012130012 – 3/8" to 2" 1 to 250 lbs.
3/8" to 2" 450° F.-3/8" to 3"

BAR STOCK STEEL NEEDLE VALVES LIQUID LEVEL GAUGES


WITH GLAND 5000 lb. W.O.G. 150° F FOR STORAGE TANKS, RESERVOIRS AND OTHER SIMILAR SERVICES

Fig. 48205890026
Bronze Automatic
Liquid Gauge
200 lb. – 500° F
1/2" x 5/8"
3/4" x 3/4"

Fig. 482017320017 – Globe CARBON STEEL Bronze Oil Gauges


Type 316 18-8 MO Stainless Steel With Revolvable Shield
Fig. 482017280018 – Globe
1/8" to 1/2" 1/8" to 1/2"
1/8" to 1"
13% CR Stainless Steel Stem Fig. 48205290019 – With Drain Cock (shown)
1" Fig. 1728 has 15/32" seat opening Fig. 48205280020 – Without Drain Cock

Fig. 482012400023 – Grip Lever


1/4" to 1/2"
AIR DEVICES Regrinding
Quick Operating Globe Valve
AIR COMPRESSOR Bronze
Stainless Steel Spring
CHECK VALVE 200 lbs. S.P. or W.O.G.

Fig. 482015710022 – Fig. 482018370024 – Grip Lever


Plug Valve 1/4" to 3/4"
1/4" to 2" Fig. 482018360025 – Pull Lever
Bronze, with 1/4" to 2"
Stop Lugs Renewable “N-M-D” (Non-Metallic Disc)
Fig. 482016160021 Stainless Steel Spring Quick Operating Valve
1/4" to 2" – 300 lbs. Air Pressure 150 lbs. Pressure Bronze, Stainless Steel Spring
Bronze, Hollow Stainless Steel Disc Orders should specify service – steam, hot water,
cold water, gas, air, gasoline, oil, butane, propane.

Lunkenheimer Valves: Authorized Parts Inc.


• Swing Joints Deer Park, NY
• Gate, Globe & Check Valves
Ph: (631) 242-2498
• Boiler Valves & Fittings • Whistle Valves
Fax: (631) 242-2120
• Lubricating Devices • Plug Cocks E-Mail: api-dd@rcn.com
• Level Gauges • Specialties www.authorizedparts.com
333 5/1/06 7:08 PM Page 1

339-06

Relief and Safety Valves

SAFETY/RELIEF VALVE HIGH PRESSURE SAFETY/RELIEF VALVE BRONZE UNION END RELIEF VALVE
FIG 910 – STEEL FIG 264 – STEEL MAX PRESSURE 3000 PSIG
FIG 911 – STAINLESS FIG 266 – STAINLESS SIZES 1/4"TO 2"
MAX PRESSURE 900 PSIG MAX PRESSURE 3300 PSIG THREADED ENDS
SIZES 1/2" TO 2" SIZES 1/2" TO 1" SUITABLE FOR LIQUID MIL-V-24332
THREADED ENDS THREADED ENDS AIR MIL-V-22541
SUITABLE FOR LIQUID, AIR OR STEAM SUITABLE FOR LIQUID, AIR OR STEAM STEAM MIL-V-20065
LIFT LEVER REQ’D FOR AIR/STEAM LIFT LEVER REQ’D FOR AIR/STEAM *SPECIFY: SET PRESSURE
*SPECIFY: SET PRESSURE *SPECIFY: SET PRESSURE SERVICE (LIQ, AIR, STM)
SERVICE (LIQ, AIR, STM) SERVICE (LIQ, AIR, STM)

LIQUID RELIEF VALVE LIQUID/AIR/STEAM STEAM SAFETY VALVE – H SERIES


FIG 20 RELIEF/SAFETY VALVE STEEL BODY DRUM TYPE OR
BRONZED BODY IRON FIG 1902; STEEL FIG 1900 FLANGED ENDS PILOT TYPE (FOR SUPER-
FLANGED ENDS FLANGED ENDS EXPOSED SPRING HEATED STEAM)
MAX PRESSURE 300 PSIG MAX PRESSURE 2500 PSIG MAX PRESSURE 3000 PSIG COMMON CONFIGURATIONS:
SIZES 1/2" TO 4" SIZES 1/2" TO 10" SIZES 1x2 TO 8x10 HN, HNA, HNB, HNP
*SPECIFY: SET PRESSURE STANDARD WITH LIFT LEVER
*SPECIFY: SET PRESSURE *SPECIFY: SET PRESSURE
SERVICE (LIQ, AIR, STM) INLET & OUTLET
FLANGE DIMENSIONS

MARINE FITTINGS
& FLANGES W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics 3485 Evergreen Ave. • Jacksonville, FL 32206 - Hose Valves
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
0328 5/1/06 7:09 PM Page 326

340-06

STACEY/FETTEROLF CORP.
SPECTACLE LINE BLIND VALVES
No. 601-AJ

Spectacle Blinds provide Bodies: Steel, ASTM A285, Grade C; welded


shut-off of liquids, gases or solids construction; SST optional—please specify when
ordering.
With the No. 601-AJ Blind, the 3 bolts are given Spectacle plate: Steel, ASTM A285; Grade C; zinc
a single turn each. The spectacle is rotated to the chromate plated; SST optional—please specify
desired position—with either the “blind” plate or when ordering.
the fulI-bore “open” plate in the pipe-line—and the Fastening bolts: Steel, C-1045; zinc chromate plated. (3
bolts are retightened. A short iron bar or pipe is the per set through 14” size, 5 bolts for larger sizes).
only tool required. The exposed plate of the “O” ring seals: Buna-N, -65° to +250° F. (4 per set)
spectacle indicates the status (open or closed) of the Pressure rating: 275 C.W.P. standard; ANSI ratings
blind at a glance. to 2500.
Ends: 150 Ib. butt weld or flanged.

SIZE 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18”


“A” 7” 8” 8” 8” 9” 9” 10” 10” 11” 12” 15” 17”
“B” 8-5/8” 8-3/4” 9-1/2” 12” 14” 15” 16-1/2” 20” 22-1/4” 25” 27-1/2” 31”
“C” 3” 3-1/2” 4” 4-1/2” 5-1/2” 6” 6-1/2” 8” 9” 10” 12-1/2” 14”
“D” 3” 3-1/4” 3-5/8” 4-1/2” 5-1/8” 5-3/4” 6-3/4” 8-3/8” 9-11/16” 10-11/16” 12” 13-1/8”
“E” 7-3/4” 8-1/4” 9-1/2” 11-1/4” 13” 15” 17-3/4” 21-3/4” 25-1/2” 29” 33” 36-1/2”
“F” 9-1/2” 10-1/4” 11-5/8” 13-7/8” 16” 18-1/4” 22-3/4” 28” 32-3/4” 36-1/2” 42” 47”
“G”
1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1” 1” 1” 1”
(DRAINS)
WEIGHT 31 37 37 57 77 108 136 220 370 425 615 780

STACEY ®
www.fetterolfvalves.com Special Trim Available
for Maritime Service
FETTEROLF CORPORATION A SchuF Corporation
P.O. Box 103, Skippack, PA 19474 • Tel: (610) 584-1500 • Fax: (610) 584-5904 • Email: info@fetterolfvalves.com
0329-04 5/1/06 7:10 PM Page 327

341-06

FETTEROLF CORPORATION
CAM-SET LINE BLINDS
APPLICATIONS FEATURES
Positive pipeline close-off is vital in many piping systems to assure Low initial cost, one-man operation and positive spectacle plate
safety of personnel working on down-stream equipment, partic- close-off is a unique approach to line blinding. It provides the
ularly when flammable or toxic liquids or gases could seep past best approach to absolute line shut-off on product lines in
a closure. When visible proof of shut-off is necessary, a line blind refineries, chemical and petrochemical plants where positive line
is mandatory to comply with plant safety regulations. Standard blinding is essential to safety and to prevent product
valve types do not qualify for this service since the enclosed body contamination.
defeats the visual inspection needed to be certain that the line 1. Only one cam to turn to open or close.
is blocked. 2. Positive shut-off.
Line blinding can be accomplished by manually separating a pair 3. No spreading of pipe required.
of bolted flanges and inserting a gasketed solid steel plate between 4. Seal unaffected by piping misalignment.
them. Line blind valves accomplish the same purposes more 5. Simple, one-man, spectacle changing from one side
easily since they have self-contained seals and can be opened of the line—no climbing over or reaching.
or closed in a matter of minutes. Line blind valves also reduce 6. 316 SST spectacle standard, or other materials
product loss and provide cleaner, safer operation. readily available.

No. Description Material


1 Body flange Steel
150# Cam-Set
2 Body pipe Carbon/Stainless steel Line Blind Valve – SST
3 Body bolts (3) Steel
4 Body bolt spacer Stainless steel, type 304
5 Cams Steel
6 Sealing actuator Steel
7 Actuator lever Steel
8 Actuator screw assy. Steel
9.1* Seal ring Viton
9.2* Seal ring Viton
9.3* Seal ring Viton (See note #4)
10 Seal carrier Stainless steel, type 316/304
11* Spectacle plate assy. Stainless steel, type 316/304
12 Grease fittings Steel
13 Flange 150# ANSI std. Steel (optional)
14 Handwheel Malleable iron (optional)
15 Lock Steel (optional)
*Recommended spare parts

SIZES AND RATINGS


Size A B C D E F L M N
1 5 1/2 2-1/2 6-1/4 5 7 6-1/2 80 1/2 Notes:
1-1/2 6-1/4 5/8 3 7-3/4 5 7-1/2 7 80 1/2 1. Flanges for Fig. 1004 valve to be attached per ANSI B31.3
2 7 3/8 3-1/4 9 6-1/2 8 7-1/2 80 1/2 Fig. 327.4.2B (1).
3 9 3/4 4 11-3/8 8 8-3/4 8 80 1/2 2. Optional seal ring material available.
4 11 3/4 5 14 9-1/4 9-3/4 9 80 1/2 3. Body flanges (item #1) are round on sizes 3 inch and below.
5 13-3/4 1 5-1/2 17-1/4 11-3/4 11-1/2 10-1/2 80 5/8 4. Seal ring (item #9.3) is TFE on sizes 4 inch and below.
6 15-1/2 1 6-3/4 19-1/2 13-1/4 11-1/2 10-1/2 80 5/8
8 19-3/4 1-5/8 7-3/4 25 15-3/4 12-1/2 11-1/2 80 5/8 MATERIALS
10 25-3/4 1-3/4 9 32-1/8 19 14 13 80 5/8 The standard body material for this Line Blind Valve is carbon
12 30 2-1/4 11 37-1/2 23-1/4 15 14 80S 7/8 steel. If other metals are required, please specify. Furnished with
14 31-1/2 2-1/4 11 39-1/2 25-5/8 18 15 XH 7/8 weld ends standard, the line blind valve is also available with
16 35-3/4 3-1/2 13 44-3/4 28 17 16 60 7/8 flange ends. Rotatable insert type flanges are welded to the weld-
18 38-3/8 3 14-1/2 48-1/2 32 27 26 60 1 end hubs. The line blinds are regularly furnished with seal rings in
20 43-3/4 2-7/8 16-1/4 55-1/4 33-3/4 28 27 60 1 the body. The standard seal ring is Viton with other materials
24 49 3-1/4 18-1/2 62-1/4 38-1/2 33 32 60 1-1/2 available as required.
Available in both 150 and 300 ANSI ratings. Maritime Trim: Stainless Steel Bolting, Stainless Steel Blocks,
Monel K500 Actuating Stem, Bronze Handwheel.

FETTEROLF
CORPORATION A SchuF Corporation www.fetterolfvalves.com
P.O. Box 103, Skippack, PA 19474 • Tel: (610) 584-1500 • Fax: (610) 584-5904 • Email: info@fetterolfvalves.com
0330-04 5/1/06 7:11 PM Page 389

342-06

Extra Long Thru-Hull Connection PERKO, INC.


Cast Bronze – For use with pipe
Flange is machined to fit hull and grooved to retain bedding compound. Intake Strainer
Neck is threaded to approximately 3/8 inch from flange. Cast Bronze
Fig. 65
Pipe Maximum Hull O. D.
Fig. 348 Size Thickness Flange Standard Weight
Inches Inches Inches Package – 1 Pc. Pounds Pipe Max. Hull Dimensions
Size Thickness Strainer Standard Weight
3/4 5 1-7/8 348 005 PLB 7/8
Inches Inches Inches Package – 1 Pc. Pounds
1 4-7/8 2-1/4 348 006 PLB 1-1/4
1-1/4 4-5/8 2-3/4 348 007 PLB 2-1/8 1/2 2-1/4 3x4 65 004 PLB 3/4
1-1/2 4-5/8 3 348 008 PLB 2-1/4 3/4 2-3/16 3x4 — 1
2 4-1/2 3-5/8 348 009 PLB 3 1 2-1/2 3x4 65 006 PLB 1-1/4
2-1/2 4-1/4 4-5/16 348 010 PLB 4 1-1/4 3 3-1/4 x 4-1/4 65 007 PLB 2

Intake Water Strainer – Cast Bronze


These water strainers are designed for easy installation and cleaning. Features include mounting lugs cast into both sides to assure universal mounting, four
outside tie rods and a 304 stainless steel strainer basket to minimize electrolysis. Screen hole size diameter .077 inches, 46% open area. Hinged lugs for the cast
bronze cover permit easy removal and cleaning of the strainer basket. A drain plug in the bottom casting is provided for easily removing sediment and draining
for winterizing. For applications requiring higher capacity see Fig. 500 below.
Pipe Height Width Standard Dimensions Dimensions Open Area Spare Gasket Kit*
Size Overall Overall Package Cylinder Basket Size Weight Display Pkg. – 5 kts.
Pounds
Inches Inches Inches 1 Pc. Inches Inches Ratio 1 Kit per Bag
Fig. 493
2 16 7-1/2 493 009 PLB 6 x 12 3-5/16 x 12-1/4 13:1 18 493 DP9 99M (or) 99R
2-1/2 16 7-1/2 493 010 PLB 6 x 12 3-5/16 x 12-1/2 10:1 18 493 DP9 99M (or) 99R
Fig. 500
2 14-1/2 9 500 009 PLB 8 x 10 3-7/8 x 10-1/4 20:1 34 500 009 99M (or) 99R
2-1/2 16-1/2 9 500 010 PLB 8 x 12 3-7/8 x 12-1/4 18:1 34 500 009 99M (or) 99R
3 18-1/2 9 500 011 PLB 8 x 14 3-7/8 x 14-1/4 14:1 34 500 009 99M (or) 99R
Fig. 493 Fig. 500 * Older Model strainers utilizing cork cylinder gaskets must order 99M (Cork Gasket Kit) and newer model strainers must order
99R (Rubber Gasket Kit). Spare Gasket Kit consists of 1 Cover Gasket and 2 Cylinder Gaskets.

The products above and below this line are not available from the same manufacturing source.
FLORIDA MARINE PRODUCTS, INC.
INTERNATIONAL SHORE CONNECTION / MARPOL FLANGE
Standard Dimensions of Flanges for Discharge Connections
Outside diameter 215mm
Inner diameter According to pipe outside diameter. (SPECIFY SIZE)
Bolt circle 183mm
Slots in flange 6 holes 22mm in diameter equidistantly placed on a bolt
circle of the above diameter, slotted to the flange
periphery. Slot width to be 22mm.
Flange Thickness 20mm
Bolts and nuts 6 each of 20mm diameter and of suitable length.
(NOT INCLUDED)
The flange is designed to accept pipes of up to 125mm internal diameter and is constructed
of steel or other equivalent material having a flat face. This flange, together with a gasket of
oilproof material, (NOT INCLUDED) shall be suitable for a service pressure of 6kg/cm2.

EXTENDED PIPE CLAMPS


SPECIFY SIZE WHEN ORDERING
PIPE SIZE 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3”
Steel 012SPH 034SPH 1SPH 114SPH 112SPH 2SPH 212SPH 3SPH
Stainless 012SSPH 034SSPH 1SSPH 114SSPH 112SSPH 2SSPH 212SSPH 3SSPH

PIPE SIZE 3-1/2” 4” 6” 8” 10” 12” 14” 16”


Steel 312SPH 4SPH 6SPH 8SPH 10SPH 12SPH 14SPH 16SPH
Stainless 312SSPH 4SSPH 6SSPH 8SSPH 10SSPH 12SSPH 14SSPH 16SSPH

Florida Marine Products, Inc.


FLORIDA 2001 E. 5th Ave. Tampa, FL 33605
WHOLESALE Phone: 1-800-952-2283
Fixtures • Fittings • Ship Board Cable MARINE PRODUCTS Fax:
1-813-248-2283
1-813-247-7105
IN STOCK SAME DAY SHIPPING
INC. E-mail: fl-marine@ij.net
Web: www.fmpusa.com
0329-03 5/1/06 7:11 PM Page 329

343-06

BFG MARINE, INC.


REMOTE VALVE OPERATORS WITH INDICATION
Operators are designed for surface mounting through floor or bulkhead as a termination point for flexible shafting or rigid rod. Units
come with a flange for bolting or a ball for welding. Parts are constructed of non-corrosive materials and are suitable for use in harsh
environments.

Thd B.C. Usable Description Material


Number Type A B C D E F G H J Turns Housing Steel
VCO-4100 1/2 Flex 5.25 3.56 4.50 1.38 .38 .75 .38 5/16 (18) 3.38 11 Flange Steel
VCO-4200 3/4 Flex 5.69 3.69 5.06 1.62 .56 1.31 .56 1/2 (13) 3.94 10 Spindle Steel
VCO-4210 3/4 Flex 5.69 3.69 5.06 1.62 .56 1.31 .56 1/2 (13) 3.94 15 Indicator Plate Brass
VCO-4300 1 Flex 6.50 3.94 5.56 2.00 .75 1.31 .75 5/8 (11) 4.44 14 Indicator Arm Bronze H
THD
VCO-4310 1 Flex 6.50 3.94 5.56 2.00 .75 1.31 .75 5/8 (11) 4.44 21 Bushing Bronze G
SQ
VCO-4400 1-1/4 Flex 8.25 4.19 5.56 2.25 1.00 1.31 1.19 1 (8) 4.44 17 Screw Brass
VCO-4410 1-1/4 Flex 8.25 4.19 5.56 2.25 1.00 1.31 1.19 1 (8) 4.44 34 Taper Pin Steel
VCO-4420 1-1/4 Flex 8.25 4.19 5.56 2.25 1.00 1.31 1.19 1 (8) 4.44 42 ”O“ Ring Syn. Compound A
VCO-4500 1-5/8 Flex 8.69 5.12 6.12 2.75 1.12 1.94 1.38 1-1/8 (7) 5.00 17 Woodruff Key Steel
VCO-4510 1-5/8 Flex 8.69 5.12 6.12 2.75 1.12 1.94 1.38 1-1/8 (7) 5.00 42 9/16”
Dia.
J Holes
VCO-2150 5/8 Rod 5.69 3.69 5.06 1.62 .62 .94 .56 1/2 (13) 3.94 10 Bolt
Circle
VCO-2160 5/8 Rod 5.69 3.69 5.06 1.62 .62 .94 .56 1/2 (13) 3.94 15
VCO-2200 3/4 Rod 6.50 3.94 5.56 2.00 .75 1.12 .75 5/8 (11) 4.44 14
VCO-2210 3/4 Rod 6.50 3.94 5.56 2.00 .75 1.12 .75 5/8 (11) 4.44 21
VCO-2300 1 Rod 8.25 4.19 5.56 2.25 1.00 1.50 1.19 1 (8) 4.44 17 3/8 D

VCO-2310 1 Rod 8.25 4.19 5.56 2.25 1.00 1.50 1.19 1 (8) 4.44 34 B

VCO-2320 1 Rod 8.25 4.19 5.56 2.25 1.00 1.50 1.19 1 (8) 4.44 42
VCO-2400 1-1/4 Rod 8.69 5.12 6.12 2.75 1.25 1.88 1.38 1-1/8 (7) 5.00 17
VCO-2410 1-1/4 Rod 8.69 5.12 6.12 2.75 1.25 1.88 1.38 1-1/8 (7) 5.00 42 F

E
All dimensions in inches
C

Thd Usable Description Material


Number Type A B C D E F G H Turns Housing Steel
VCO-3100 1/2 Flex 5.62 3.19 2.69 1.38 .38 .75 .38 5/16 (18) 11 Collar Steel
VCO-3200 3/4 Flex 6.12 3.25 2.94 1.62 .56 1.31 .56 1/2 (13) 10 Spindle Steel
VCO-3210 3/4 Flex 6.12 3.25 2.94 1.62 .56 1.31 .56 1/2 (13) 15 Indicator Plate Brass
VCO-3300 1 Flex 7.06 3.38 3.31 2.00 .75 1.31 .75 5/8 (11) 14 Indicator Arm Bronze H
THD
VCO-3310 1 Flex 7.06 3.38 3.31 2.00 .75 1.31 .75 5/8 (11) 21 Bushing Bronze G
VCO-3400 1-1/4 Flex 8.94 3.50 3.69 2.25 1.00 1.31 1.19 1 (8) 17 Screw Brass SQ
VCO-3410 1-1/4 Flex 8.94 3.50 3.69 2.25 1.00 1.31 1.19 1 (8) 34 Taper Pin Steel
VCO-3420 1-1/4 Flex 8.94 3.50 3.69 2.25 1.00 1.31 1.19 1 (8) 42 ”O“ Ring Syn. Compound
A
VCO-3500 1-5/8 Flex 9.56 4.25 4.31 2.75 1.12 1.94 1.38 1-1/8 (7) 17 Woodruff Key Steel
VCO-3510 1-5/8 Flex 9.56 4.25 4.31 2.75 1.12 1.94 1.38 1-1/8 (7) 42
VCO-1150 5/8 Rod 6.12 3.25 2.94 1.62 .62 .94 .56 1/2 (13) 10
VCO-1160 5/8 Rod 6.12 3.25 2.94 1.62 .62 .94 .56 1/2 (13) 15
VCO-1200 3/4 Rod 7.06 3.38 3.31 2.00 .75 1.12 .75 5/8 (11) 14
VCO-1210 3/4 Rod 7.06 3.38 3.31 2.00 .75 1.12 .75 5/8 (11) 21
C
VCO-1300 1 Rod 8.94 3.50 3.69 2.25 1.00 1.50 1.19 1 (8) 17 D
B
VCO-1310 1 Rod 8.94 3.50 3.69 2.25 1.00 1.50 1.19 1 (8) 34
VCO-1320 1 Rod 8.94 3.50 3.69 2.25 1.00 1.50 1.19 1 (8) 42
VCO-1400 1-1/4 Rod 9.56 4.25 4.31 2.75 1.12 1.88 1.38 1-1/8 (7) 17
F
VCO-1410 1-1/4 Rod 9.56 4.25 4.31 2.75 1.12 1.88 1.38 1-1/8 (7) 42
E

All dimensions in inches

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0332-04 5/1/06 7:12 PM Page 330

344-06

BFG MARINE, INC.


VALVE COUPLINGS
Male / female — without quick disconnect rigid rod controls
Assembly note: mating parts to be pinned on or welded by customer

For non-rising handwheel valves


Type To Fit Rod A B C D E F G H J
Valve Diam. (Taper
Pilot Hand- Pin)
Hole Drill wheel
F Size
through H
See and Taper F VCM-1000 SERIES - Male
Assembly G
Ream for G VCM-1100 3 - 5 5/8 2-1/4 3-1/4 1-1/4 3/16 1-3/8 5/8 15/16 - -
Note “J” Taper Pin
A VCM-1200 6 - 9 3/4 2-1/4 4-1/4 1-5/8 3/16 1-3/8 3/4 1-1/8 - -
D D A VCM-1300 10 - 12 1 2-1/4 6-1/2 2 1/4 1-3/8 1 1-1/2 - -
E E
VCM-1400 14 - 27 1-1/4 2-9/16 8 2-3/8 5/16 1-9/16 1-1/4 1-7/8 - -
C C VCF-1000 SERIES - Female
B B 00 x
VCF-1100 3- 5 5/8 2-3/8 3-1/4 1-1/4 3/16 1-3/8 5/8 15/16 .94
TYPE VCM-1000 TYPE VCF-1000 15/16
VCF-1200 6-9 3/4 2-1/2 4-1/4 1-5/8 3/16 1-3/8 3/4 1-1/8 1.12 0 x 1-1/8
VCF-1300 10 -12 1 2-1/2 6-1/2 2 1/4 1-3/8 1 1-1/2 1.50 4 x 1-1/2
VCF-1400 14 - 27 1-1/4 2-15/16 8 2-3/8 5/16 1-9/16 1-1/4 1-7/8 2.00 5x2

F
H For rising stem valves
See Pilot
Assembly G F Type To Fit Rod A B C D E F G H J
Hole Drill
Note through G Valve Diam. (Taper
Hand- Pin)
and Taper wheel
Ream for Size
“J” Taper
Pin VCM-2000 SERIES - Male
VCM-2100 3 - 5 5/8 5-7/8 4-3/4 2-3/8 1/4 5 5/8 15/16 - -
A
VCM-2200 6 - 9 3/4 8-1/4 5-1/2 3 1/4 7-3/8 3/4 1-1/8 - -
G EA
VCM-2300 10 - 12 1 12-1/4 7 3-7/8 1/4 11-3/8 1 1-1/2 - -
VCM-2400 14 - 27 1-1/4 18-1/4 8-3/4 4-7/8 5/16 17-1/4 1-1/4 1-7/8 - -
D VCF-2000 SERIES - Female
00 x
VCF-2100 3-5 5/8 6 4-3/4 2-3/8 1/4 5 5/8 15/16 .94
C C 15/16
B VCF-2200 6-9 3/4 8-1/2 5-1/2 3 1/4 7-3/8 3/4 1-1/8 1.12 0 x 1-1/8
B
VCF-2300 10 - 12 1 12-1/2 7 3-7/8 1/4 11-3/8 1 1-1/2 1.50 4 x 1-1/2
TYPE VCM-2000 TYPE VCF-2000
VCF-2400 14 - 27 1-1/4 18-5/8 8-3/4 4-7/8 5/16 17-1/4 1-1/4 1-7/8 2.00 5x2

For rising handwheel valves (telescopes on closing)


Type To Fit Rod A B C D E F G H J
Valve Diam. (Taper
H Hand- Pin)
Pilot Hole F wheel
F Drill through Size
See and Taper G
(Open Position Shown)

(Open Position Shown)

G Ream for “J” VCM-3000 SERIES - Male


Assembly
Taper Pin VCM-3100 3 - 5 5/8 4 3-1/4 1-1/4 3/16 1-1/2 5/8 15/16 - -
Note
VCM-3200 6 - 9 3/4 5-1/2 4-1/4 1-5/8 3/16 2-3/4 3/4 1-1/8 - -
(Travel)

A
E
(Travel)

VCM-3300 10 - 12 1 7-3/8 6-1/2 2 1/4 4-1/4 1 1-1/2 - -


A E VCM-3400 14 - 27 1-1/4 9-7/8 8 2-3/8 5/16 6 1-1/4 1-7/8 - -
D D VCF-3000 SERIES - Female
00 x
C VCF-3100 3-5 5/8 4-3/16 3-1/4 1-1/4 3/16 1-1/2 5/8 15/16 .94
C 15/16
B B VCF-3200 6-9 3/4 5-13/16 4-1/4 1-5/8 3/16 2-3/4 3/4 1-1/8 1.12 0 x 1-1/8
TYPE VCM-3000 TYPE VCF-3000 VCF-3300 10 - 12 1 7-11/16 6-1/2 2 1/4 4-1/4 1 1-1/2 1.50 4 x 1-1/2
VCF-3400 14 - 27 1-1/2 10-5/16 8 2-3/8 5/16 6 1-1/4 1-7/8 2.00 5x2

All dimensions in inches

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0331-03 5/1/06 7:13 PM Page 331

345-06

BFG MARINE, INC.


VALVE COUPLINGS
Male / Female – With Quick Disconnect and Rigid Rod Controls
Assembly note: mating parts to
be pinned or welded by customer For non-rising handwheel valves
To Fit
Valve J
Type Hand- Rod A B C D E F G H (Taper K
Pilot Hole wheel Diam. Pin)
See Drill Through and Size
Assembly Taper Ream For
“J” Taper Pin VCDM-1000 SERIES – Male
Note
VCDM-1100 3-5 5/8 4-1/8 3-1/4 1-1/4 3/16 1-3/8 5/8 15/16 - - 4.25
VCDM-1200 6-9 3/4 4-3/16 4-1/4 1-5/8 3/16 1-3/8 3/4 1-1/8 - - 5.00
VCDM-1300 10 - 12 1 4-3/16 6-1/2 2 1/4 1-3/8 1 1-1/2 - - 5.50
VCDM-1400 14 - 27 1-1/4 5-1/16 8 2-3/8 5/16 1-9/16 1-1/4 1-7/8 - - 6.00
VCDM-1000 SERIES – Female
00 x
VCDF-1100 3-5 5/8 3-5/8 3-1/4 1-1/4 3/16 1-3/8 5/8 15/16 .94 4.25
15/16
VCDF-1200 6-9 3/4 3-3/4 4-1/4 1-5/8 3/16 1-3/8 3/4 1-1/8 1.12 0 x 1-1/8 5.00
VCDF-1300 10 - 12 1 3-3/4 6-1/2 2 1/4 1-3/8 1 1-1/2 1.50 4 x 1-1/2 5.50
Type VCDM-1000 Type VCDF-1000 VCDF-1400 14 - 27 1-1/4 4-9/16 8 2-3/8 5/16 1-9/16 1-1/4 1-7/8 2.00 5x2 6.00

Pilot Hole
See Drill Through and
Assembly Taper Ream For
Note “J” Taper Pin For rising stem valves
To Fit
Valve J
Type Hand- Rod A B C D E F G H (Taper K
wheel Diam. Pin)
Size
VCDM-2000 SERIES – Male
VCDM-2100 3-5 5/8 7-3/4 4-3/4 2-3/8 1/4 5 5/8 15/16 - - 4.25
VCDM-2200 6-9 3/4 10-3/16 5-1/2 3 1/4 7-3/8 3/4 1-1/8 - - 5.00
VCDM-2300 10 - 12 1 14-3/16 7 3-7/8 1/4 11-3/8 1 1-1/2 - - 5.50
VCDM-2400 14 - 27 1-1/4 20-3/4 8-3/4 4-7/8 5/16 17-1/4 1-1/4 1-7/8 - - 6.00
VCDF-2000 SERIES – Female
00 x
VCDF-2100 3-5 5/8 7-1/4 4-3/4 2-3/8 1/4 5 5/8 15/16 .94 4.25
15/16
VCDF-2200 6-9 3/4 9-3/4 5-1/2 3 1/4 7-3/8 3/4 1-1/8 1.12 0 x 1-1/8 5.00
VCDF-2300 10 - 12 1 13-3/4 7 3-7/8 1/4 11-3/8 1 1-1/2 1.50 4 x 1-1/2 5.50
VCDF-2400 14 - 27 1-1/4 20-1/4 8-3/4 4-7/8 5/16 17-1/4 1-1/4 1-7/8 2.00 5x2 6.00
Type VCDF-2000
Type VCDM-2000

Pilot Hole
Drill Through and
For rising handwheel valves (telescopes on closing)
Taper Ream For To Fit
“J” Taper Pin Valve J
See Rod
Type Hand- A B C D E F G H (Taper K
Assembly
wheel Diam. Pin)
Note
Size
VCDM-3000 SERIES – Male
VCDM-3100 3-5 5/8 5-7/8 3-1/4 1-1/4 3/16 1-1/2 5/8 15/16 - - 4.25
VCDM-3200 6-9 3/4 7-7/16 4-1/4 1-5/8 3/16 2-3/4 3/4 1-1/8 - - 5.00
VCDM-3300 10 - 12 1 9-5/16 6-1/2 2 1/4 4-1/4 1 1-1/2 - - 5.50
VCDM-3400 14 - 27 1-1/4 12-5/16 8 2-3/8 5/16 6 1-1/4 1-7/8 - - 6.00
VCDF-3000SERIES – Female
00 x
VCDF-3100 3-5 5/8 5-3/8 3-1/4 1-1/4 3/16 1-1/2 5/8 15/16 .94 4.25
15/16
VCDF-3200 6-9 3/4 7 4-1/4 1-5/8 3/16 2-3/4 3/4 1-1/8 1.12 0 x 1-1/8 5.00
Type VCDM-3000 Type VCDF-3000 VCDF-3300 10 - 12 1 8-7/8 6-1/2 2 1/4 4-1/4 1 1-1/2 1.50 4 x 1-1/2 5.50
VCDF-3400 14 - 27 1-1/4 11-7/8 8 2-3/8 5/16 6 1-1/4 1-7/8 2.00 5x2 6.00

All dimensions are in inches

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0332-03 5/1/06 7:14 PM Page 332

346-06

BFG MARINE, INC.


VALVE COUPLINGS
With / Without Quick Disconnect Flexible Shaft Controls
For non-rising handwheel valves
Woodruff Shaft
Key* Type Core A B C D E F G H
Diam.
VC-1000 SERIES – Without quick disconnect flexible shaft controls
VC-1100 1/2 2-3/8 2-3/4 1 3/16 7/16 - .818 3/8
VC-1200 3/4 3-1/2 3-1/4 1-1/4 3/16 1-3/8 - 1.286 9/16
VC-1300 1 3-1/2 4-1/4 1-5/8 3/16 1-3/8 - 1.255 3/4
VC-1400 1-1/4 3-1/2 6-1/2 1 1/4 1-3/8 - 1.255 1
VC-1500 1-5/8 4-3/8 8 2-3/8 5/16 1-9/16 - 1.875 1-1/8
VCD-1000 SERIES – With quick disconnect flexible shaft controls
VCD-1100 1/2 3-3/4 2-3/4 1 3/16 7/16 3.50 .818 3/8
VCD-1200 3/4 5-3/8 3-1/4 1-1/4 3/16 1-3/8 4.25 1.286 9/16
VCD-1300 1 5-3/8 4-1/4 1-5/8 3/16 1-3/8 5.00 1.255 3/4
Nonrising Handwheel Nonrising Handwheel VCD-1400 1-1/4 5-3/8 6-1/2 2 1/4 1-3/8 5.50 1.255 1
Type VC-1100 Type VCD-1000 VCD-1500 1-5/8 6-13/16 8 2-3/8 5/16 1-9/16 6.00 1.875 1-1/8

Woodruff
Key* For rising stem valves
Shaft
Type Core A B C D E F G H
Diam.
VC-2000 SERIES – Without quick disconnect flexible shaft controls
VC-2100 1/2 5-7/8 4-3/8 2-1/8 3/16 3-15/16 - .818 3/8
VC-2200 3/4 7-1/8 4-3/4 2-3/8 1/4 5 - 1.286 9/16
VC-2300 1 9-1/2 5-1/2 3 1/4 7-3/8 - 1.255 3/4
VC-2400 1-1/4 13-1/2 7 3-7/8 1/4 11-3/8 - 1.255 1
VC-2500 1-5/8 20-1/16 8-3/4 4-7/8 5/16 17-1/4 - 1.875 1-1/8
VCD-2000 SERIES – With quick disconnect flexible shaft controls
VCD-2100 1/2 7-1/4 4-3/8 2-1/8 3/16 3-15/16 3.50 .818 3/8
VCD-2200 3/4 9 4-3/4 2-3/8 1/4 5 4.25 1.286 9/16
VCD-2300 1 11-3/8 5-1/2 3 1/4 7-3/8 5.00 1.255 3/4
VCD-2400 1-1/4 15-3/8 7 3-7/8 1/4 11-3/8 5.50 1.255 1
VCD-2500 1-5/8 22-1/2 8-3/4 4-7/8 5/16 17-1/4 6.00 1.875 1-1/8

Rising Stem Rising Stem


Type VC-2000 Type VCD-2000

For rising handwheel valves (telescopes on closing)


Woodruff Shaft
Key* Type Core A B C D E F G H
Diam.
VC-3000 SERIES – Without quick disconnect flexible shaft controls
VC-3100 1/2 4-1/16 2-3/4 1 3/16 1-1/16 - .818 3/8
VC-3200 3/4 5-1/4 3-1/4 1-1/4 3/16 1-1/2 - 1.286 9/16
VC-3300 1 6-3/4 4-1/4 1-5/8 3/16 2-3/4 - 1.255 3/4
VC-3400 1-1/4 8-5/8 6-1/2 2 1/4 4-1/4 - 1.255 1
VC-3500 1-5/8 11-5/8 8 2-3/8 5/16 6 - 1.875 1-1/8
VCD-3000 SERIES – With quick disconnect flexible shaft controls
VCD-3100 1/2 5-1/2 2-3/4 1 3/16 1-1/16 3.50 .818 3/8
VCD-3200 3/4 7-1/8 3-1/4 1-1/4 3/16 1-1/2 4.25 1.286 9/16
VCD-3300 1 8-5/8 4-1/4 1-5/8 3/16 2-3/4 5.00 1.255 3/4
VCD-3400 1-1/4 10-1/2 6-1/2 2 1/4 4-1/4 5.50 1.255 1
VCD-3500 1-5/8 14-1/8 8 2-3/8 5/16 6 6.00 1.875 1-1/8
Rising Handwheel Rising Handwheel
Type VC-3000 Type VCD-3000

*Supplied only with flexible shaft part numbers orders


All dimensions are in inches

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0333-03 5/1/06 7:14 PM Page 333

347-06

BFG MARINE, INC.

UNIVERSAL JOINTS to MIL-20625A


A B C D E
Steel Stainless Bronze
O.D. Bore Bore Lg. Min.
VCU-1130 VCU-1230 VCU-1330 1.00 .50 .50 3.38 1.06
VCU-1135 VCU-1235 VCU-1335 1.12 .62 .62 3.00 .88
VCU-1140 VCU-1240 VCU-1340 1.25 .50 .50 3.75 1.12
VCU-1141 VCU-1241 VCU-1341 1.25 .62 .62 3.75 1.12
VCU-1142 VCU-1242 VCU-1342 1.25 .75 .75 3.75 1.12
VCU-1143 VCU-1243 VCU-1343 1.25 .75 .62 3.75 1.12
VCU-1144 VCU-1244 VCU-1344 1.25 .75 .50 3.75 1.12
VCU-1145 VCU-1245 VCU-1345 1.50 .88 .88 4.25 1.38
VCU-1150 VCU-1250 VCU-1350 1.75 .75 .75 5.00 1.50
VCU-1151 VCU-1251 VCU-1351 1.75 1.00 1.00 5.00 1.50
VCU-1152 VCU-1252 VCU-1352 1.75 1.25 1.25 5.00 1.50
Single VCU-1153 VCU-1253 VCU-1353 1.75 1.25 1.00 5.00 1.50
VCU-1154 VCU-1254 VCU-1354 1.75 1.00 .75 5.00 1.50
VCU-1155 VCU-1255 VCU-1355 2.00 1.25 1.25 5.44 1.59
VCU-1160 VCU-1260 VCU-1360 2.50 1.25 1.25 7.00 2.38
VCU-1161 VCU-1261 VCU-1361 2.50 1.50 1.50 7.00 2.38
VCU-1170 VCU-1270 VCU-1370 3.00 1.75 1.75 9.00 2.75

A B C D E F
Steel Stainless Bronze
O.D. Bore Bore Lg. Min. Lg.
VCU-1430 VCU-1530 VCU-1630 1.00 .50 .50 4.874 1.06 1.687
VCU-1435 VCU-1535 VCU-1635 1.12 .62 .62 4.625 .88 1.500
VCU-1440 VCU-1540 VCU-1640 1.25 .50 .50 5.625 1.12 1.875
VCU-1441 VCU-1541 VCU-1641 1.25 .62 .62 5.625 1.12 1.875
VCU-1442 VCU-1542 VCU-1642 1.25 .75 .75 5.625 1.12 1.875
VCU-1443 VCU-1543 VCU-1643 1.25 .75 .62 5.625 1.12 1.875
VCU-1444 VCU-1544 VCU-1644 1.25 .75 .50 5.625 1.12 1.875
VCU-1445 VCU-1545 VCU-1645 1.50 .88 .88 6.812 1.38 2.250
VCU-1450 VCU-1550 VCU-1650 1.75 .75 .75 8.000 1.50 2.625
VCU-1451 VCU-1551 VCU-1651 1.75 1.00 1.00 8.000 1.50 2.625
VCU-1452 VCU-1552 VCU-1652 1.75 1.25 1.25 8.000 1.50 2.625
VCU-1453 VCU-1553 VCU-1653 1.75 1.25 1.00 8.000 1.50 2.625
Double VCU-1454 VCU-1554 VCU-1654 1.75 1.00 .75 8.000 1.50 2.625
VCU-1455 VCU-1555 VCU-1655 2.00 1.25 1.25 9.187 1.59 3.000
VCU-1460 VCU-1560 VCU-1660 2.50 1.25 1.25 11.062 2.38 3.500
VCU-1461 VCU-1561 VCU-1661 2.50 1.50 1.50 11.062 2.38 3.500
VCU-1470 VCU-1570 VCU-1670 3.00 1.75 1.75 13.812 2.75 4.500

BOLT TYPE UNIVERSAL JOINTS


Hubs & block – Cast bronze
Pins – Stainless steel
Bolts & nuts – Stainless steel
Bolt Approx.
Cat. No. A B C D E F
Dia. Weight
VCU-3150 5/8” 1-3/8” 6-7/8” 1-7/8” 3/4” 7/16” 7/16” 3.5 lbs.
VCU-3200 3/4” 1-3/8” 6-7/8” 1-7/8” 3/4” 7/16” 7/16” 3.5 lbs.
VCU-3250 7/8” 1-3/4” 6-15/16” 2” 15/16” 19/32” 1/2” 6.0 lbs.
VCU-3300 1” 1-3/4” 6-15/16” 2” 15/16” 19/32” 1/2” 6.0 lbs.
VCU-3350 1-1/8” 2-1/8” 8-1/2” 2-1/4” 1-1/8” 3/4” 5/8” 10.0 lbs.
VCU-3400 1-1/4” 2-1/8” 8-1/2” 2-1/4” 1-1/8” 3/4” 5/8” 10.0 lbs.
VCU-3450 1-3/8” 2-1/2” 8-3/4” 2-1/2” 1-3/8” 7/8” 3/4” 13.5 lbs.
VCU-3500 1-1/2” 2-1/2” 8-3/4” 2-1/2” 1-3/8” 7/8” 3/4” 13.5 lbs.
VCU-3550 1-5/8” 3” 9-1/2” 2-7/8” 1-5/8” 1” 1” 22.0 lbs.
VCU-3600 1-3/4” 3” 9-1/2” 2-7/8” 1-5/8” 1” 1” 22.0 lbs.
VCU-3650 1-7/8” 3” 9-1/2” 2-7/8” 1-5/8” 1” 1” 22.0 lbs.
VCU-3700 2” 3” 9-1/2” 2-7/8” 1-5/8” 1” 1” 22.0 lbs.
All dimensions are in inches

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0334-03 5/1/06 7:15 PM Page 334

348-06

BFG MARINE, INC.

CONSOLIDATED HINGED JOINTS


Specify with or without bracket
Size Cat. No. A B C D E F G Approx. Wt.
1/2 VCK-1100 2-23/32” 2-5/32” 2-15/16” 1.000/.998 21/32” 5/32” 1-3/32” 3-1/2 lbs.
3/4 VCK-1200 3-1/8” 2-7/16” 3-1/2” 1.250/1.248 25/32” 3/16” 1-1/4” 5-1/2 lbs.
1 VCK-1300 3-1/2” 2-11/16” 4-1/4” 1.500/1.498 29/32” 3/16” 1-7/16” 8-1/4 lbs.
1-1/4 VCK-1400 4-5/32” 3-3/16” 4-1/2” 1.750/1.748 1-13/32” 3/16” 1-5/8” 11-3/4 lbs.

90° GEAR BOX BRONZE OR ALUMINUM


Housing Flexible Shaft
Alum. Brz. Size A B C D E F G H J (THD) K L
VCG-4100 VCG-5100 1/2 4.18 2.50 1.19 1.186/1.184 .38 .81 1.94 1.75 3/8 (16) 1.75 .44
VCG-4150 VCG-5150 3/4 4.69 2.50 1.19 1.499/1.497 .56 1.31 1.94 1.75 3/8 (16) 1.75 .44
VCG-4200 VCG-5200 1 5.75 3.00 1.63 1.810/1.808 .75 1.31 2.75 2.63 1/2 (13) 2.00 .56
VCG-4250 VCG-5250 1-1/4 5.75 3 1.63 2.123/2.121 1.00 1.31 2.75 2.63 1/2 (13) 2.00 .56
VCG-4300 VCG-5300 1-5/8 7.00 3.75 1.81 2.623/2.621 1.12 1.94 3.06 2.69 5/8 (11) 2.50 .69 Specifications
Description Material
Housing Brz. or Alum.
Spindles Steel
Housing Solid Shaft Gears Steel
Alum. Brz. Size A B C D E F G H J (THD) K L Gasket Vellum
VCG-2100 VCG-3100 1/2 4.69 2.50 1.19 1.499/1.497 .50 1.31 1.94 1.75 3/8 (16) 1.75 .44 Cover Brass
VCG-2150 VCG-3150 5/8 4.69 2.50 1.19 1.499/1.497 .62 1.31 1.94 1.75 3/8 (16) 1.75 .44 Rd. Hd. Screw Brass
VCG-2200 VCG-3200 3/4 5.94 3.00 1.63 2.123/2.121 .75 1.50 2.75 2.63 1/2 (13) 2.00 .56 Keys Steel
VCG-2250 VCG-3250 1 5.94 3.00 1.63 2.123/2.121 1.00 1.50 2.75 2.63 1/2 (13) 2.00 .56 Washers Steel
VCG-2300 VCG-3300 1-1/4 6.94 3.75 1.81 2.623/2.621 1.25 1.88 3.06 2.69 5/8 (11) 2.50 .69 Bearings Steel
Thrust Washers Steel
Above dimensions in inches Shims Brass
Thrust Bearings Steel
Soc. Hd. Screw Steel
Oil Seal Syn. Rub.

90° GEAR BOX MOUNTING BRACKETS


FABRICATED STEEL FOR CONSOLIDATED
HINGED JOINTS
Material for both brackets
Bracket Mall. Iron
Cap Mall. Iron
Screws Steel
Washers Steel
Nut Steel

Size Part No. A B C D E F G H X Holes Approx. Wt.


1/2 VCMB-1100 1” 3-3/4” 1-1/2” 3/8” 3-1/4” 9/16” 1-1/2” 1-9/16” 1/2” .88 lb.
Part No. Shaft A B 3/4 VCMB-1200 1-1/4” 4” 1-3/4” 3/8” 3-3/4” 11/16” 1-1/2” 1-13/16” 11/16” 1.13 lbs.
VCG-1200 3/4” 4” 4” 1 VCMB-1300 1-1/2” 4” 1-5/8” 3/8” 4-1/4” 13/16” 1-1/2” 1-13/16” 11/16” 1.32 lbs.
VCG-1300 1” 5” 5” 1-1/4 VCMB-1400 1-3/4” 4-1/8” 1-7/8” 1/2” 4-1/2” 1-3/8” 1-1/2” 1-13/16” 11/16” 2.25 lbs.

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0335-03 5/1/06 7:16 PM Page 335

349-06

BFG MARINE, INC.

SHAFT HANGERS
Size Part No. A B C D E F G H J Holes
1/2 VCH-1100 .505” 3-1/8” 1-1/4” 3/8” 2-5/8” 9/16” 1-3/8” 1-11/32” 1/2”
5/8 VCH-1101 .630” 3-3/4” 1-1/2” 3/8” 3-1/4” 9/16” 1-1/2” 1-9/16” 1/2”
3/4 VCH-1200 .755” 3-3/4” 1-1/2” 3/8” 3-1/4” 9/16” 1-1/2” 1-9/16” 1/2”
1 VCH-1300 1.005” 4” 1-3/4” 3/8” 3-3/4” 11/16” 1-1/2” 1-13/16” 11/16”
1-1/4 VCH-1400 1.255” 4” 1-5/8” 3/8” 4-1/4” 13/16” 1-1/2” 1-13/16” 11/16”
1-1/2 VCH-1500 1.505” 4-1/8” 1-7/8” 1/2” 4-1/2” 1-3/8” 1-1/2” 1-13/16” 11/16”
1-3/4 VCH-1600 1.755” 4-1/8” 1-7/8” 1/2” 4-3/4” 1-11/16” 1-1/2” 1-13/16” 11/16”
2 VCH-1700 2.005” 5-1/2” 2-5/8” 1/2” 6-1/4” 2” 2” 2-9/16” 11/16”

Size Part No. A B C D E F G H J K Holes


1/2 VCH-2100 .505” 1-13/16” 3-3/8” 1-1/2” 2-5/8” 3/4” 2-1/2” 5/16” 7/16” 2-1/2”
5/8 VCH-2101 .630 1-13/16” 3-3/8” 1-1/2” 2-5/8” 3/4” 2-1/2” 5/16” 7/16” 2-1/2”
3/4 VCH-2200 .755” 1-7/8” 4” 1-1/2” 3-1/4” 5/8” 2-5/8” 7/16” 11/16” 2-11/16”
1 VCH-2300 1.005” 2-5/16” 4-1/4” 1-3/4” 3-7/8” 11/16” 2-7/8” 1/2” 11/16” 3-3/8”
1-1/4 VCH-2400 1.255” 2-1/4” 4-1/2” 2” 4-5/16” 13/16” 3-1/16” 1/2” 11/16” 3-1/2”
1-1/2 VCH-2500 1.505” 2-9/16” 5-1/16” 2” 4-9/16” 1-5/16” 3-1/2” 1/2” 11/16” 3-3/4”
1-3/4 VCH-2600 1.755” 2-15/16” 5-1/8” 2” 4-7/8” 1-45/64” 3-1/2” 7/16” 11/16” 4-3/8”

Size Part No. A B C D E F G H J (Holes)


1/2 VCH-3100 .505 3-1/8 1-1/4 3/8 2-5/8 9/16 1-3/8 1-11/32 1/2
3/4 VCH-3200 .755 4 1-3/4 3/8 3-3/4 11/16 1-1/2 1-13/16 11/16
1 VCH-3300 1.005 4 1-3/4 3/8 3-3/4 11/16 1-1/2 1-13/16 11/16
1-1/4 VCH-3400 1.255 4-1/8 1-7/8 1/2 4-1/2 1-3/8 1-1/2 1-13/16 11/16
1-1/2 VCH-3500 1.505 4-1/8 1-7/8 1/2 4-1/2 1-3/8 1-1/2 1-13/16 11/16

BRONZE SHAFT BEARINGS


Size Part No. A B C D G Approx. Wt.
1/2 VCB-1100 .53” 4-1/4” 1-3/4” 1-1/8” 1-1/4” 1 lb.
3/4 VCB-1200 .78” 4-1/2” 2” 1-3/8” 1-1/2” 1-1/4 lbs.
1 VCB-1300 1.06” 4-1/2” 2” 1-3/8” 1-1/2” 1-1/4 lbs.
1-1/4 VCB-1400 1.31” 4-3/4” 2-1/4” 1-5/8” 1-3/4” 1-5/16 lbs.
1-1/2 VCB-1500 1.56” 5” 2-1/2” 1-3/4” 2-1/8” 2 lbs.

G Holes
Size Part No. A B C D E F G Holes H Approx. Wt.
1/2 VCB-2100 .53” 1-3/8” 1” 1-3/16” 3/8” 1-3/8” 5/16” 2-3/4” 1/2 lb.
3/4 VCB-2200 .78” 1-3/8” 1” 1-3/16” 3/8” 1-3/8” 5/16” 2-3/4” 3/4 lb.
1 VCB-2300 1.6” 2-1/8” 1-1/2” 1-7/8” 1/2” 1-15/16” 7/16” 4” 1-3/4 lbs.
1-1/4 VCB-2400 1.31” 2-1/8” 1-1/2” 1-7/8” 1/2” 1-15/16” 7/16” 4” 2 lbs.
1-1/2 VCB-2500 1.53” 2-1/4” 1-11/16” 2-1/4” 5/8” 2-13/16” 9/16” 4-5/16” 2-1/4 lbs.

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0336-03 5/1/06 7:17 PM Page 336

350-06

BFG MARINE, INC.


SLIP JOINTS
These joints or couplings allow for changes in system length due
to motion, vibration, etc. They can be adapted for use with
flexible shaft systems. Description Material
Splined version also available on request. Sleeve Steel
Bushing Steel
Part No. Type A B C D E F G Cap screw Steel
VCSJ-3100 5/8” Rod 4.00” 15/16” 1-1/2” 15/16” 5/8” 5/8” 1-1/2” Lock washer Steel
VCSJ-3200 3/4” Rod 5.62” 1-1/8” 2-1/2” 1-1/8” 3/4” 3/4” 1-3/4” Washer Steel
Slip Joint
VCSJ-3300 1” Rod 7.88” 1-1/2” 4-1/4” 1-1/2” 1” 1” 2-1/4” Square adapter Steel
VCSJ-3400 1-1/4” Rod 10.25” 1-7/8” 6-1/8” 1-7/8” 1-1/4” 1-1/4” 2-1/2” Square bushing Bronze

STEEL COUPLINGS
The weld type coupling is used to join rigid rods by welding. They are
slotted on the ends to allow for increased effective weld area, which
translates into higher torsional strength.
The pin type coupling is similar to the weld coupling but is joined with
the use of pins, providing an easily disassembled joint for easy
maintenance. Weld Type
Pin Type Weld Type Dimensions
Type
Part No. Approx. Wt. Part No. Approx. Wt. A B
1/2” Rod VCC-1100 .82 lbs. VCC-2100 .53 lbs. 1/2” 1”
3/4” Rod VCC-1200 1.87 lbs. VCC-2200 .92 lbs. 3/4” 1-1/4”
1” Rod VCC-1300 2.30 lbs. VCC-2300 1.55 lbs. 1” 1-5/8”
1-1/4” Rod VCC-1400 2.70 lbs. VCC-2400 1.83 lbs. 1-1/4” 1-7/8”
1-1/2” Rod VCC-1500 3.75 lbs. VCC-2500 2.20 lbs. 1-1/2” 2-3/8”
1-3/4” Rod VCC-1600 4.94 lbs. VCC-2600 3.29 lbs. 1-3/4” 2-3/4”
2” Rod VCC-1700 5.55 lbs. VCC-2700 3.81 lbs. 2” 3”
Pin Type
EXPANSION
COUPLINGS
Construction
Expansion coupling Bronze
Shaft Steel
Pins Steel
Keys Steel
Lube connection 90° angle - Zerk VCE-3000
VCE-4000

Part No. A B C D E F G
VCE-3100 1/2” 1” 5-3/4” 2-1/2” 6-1/4” 1” 3/4”
VCE-3200 3/4” 1-1/4” 5-3/4” 2-1/2” 6-1/4” 1” 3/4” SLIP COUPLINGS
VCE-3300 1” 1-3/4” 5-3/4” 2-1/2” 6-1/4” 1” 3/4” Shaft and coupling made of cold rolled steel
VCE-3400 1-1/4” 2” 5-3/4” 2-1/2” 6-1/4” 1” 3/4”
VCE-3500 1-1/2” 2-1/2” 5-3/4” 2-1/2” 6-1/4 1” 3/4”
VCE-4100 1/2” 1” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-4200 3/4” 1-1/4” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-4300 1” 1-3/4” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-4400 1-1/4” 2” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-4500 1-1/2” 2-1/2” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-5100 1/2” 1” 10-1/4” 8-1/4” 3-1/2” 1-1/4” – VCE-5000
VCE-5200 3/4” 1-1/4” 12” 8-1/4” 4” 2” –
VCE-5300 1” 1-3/4” 15-1/2” 11-1/4” 5” 2-1/2” –
VCE-5400 1-1/4” 2” 18-1/4” 12-1/4” 5-1/2” 3” –
VCE-5500 1-1/2” 2-1/2” 18-1/4” 13” 5-1/2” 3” –
VCE-6100 1/2” 1” 7” 12” 2-1/2” 1-1/4” 1-1/4”
VCE-6200 3/4” 1-1/4” 7” 16” 4-1/2” 2” 2”
VCE-6300 1” 1-3/4” 8” 17” 4-1/2” 2-1/2” 2-1/2”
VCE-6400 1-1/4” 2” 9” 18” 4-1/2” 3” 3”
VCE-6500 1-1/2” 2-1/2” 9” 18” 4-1/2” 3” 3” VCE-6000

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
339 5/1/06 7:18 PM Page 337

351-06

BFG MARINE, INC.

VALVE HANDWHEELS
Specify commercial or Navship specs
A B C
Aluminum Bronze Steel Dia. Sq. Ref.
VCW-1030 VCW-2030 VCW-3030 3” 9/32” 7/16”
VCW-1031 VCW-2031 VCW-3031 3” 5/16” 7/16”
VCW-1040 VCW-2040 VCW-3040 4” 5/16” 1/2”
VCW-1041 VCW-2041 VCW-3041 4” 3/8” 1/2”
VCW-1050 VCW-2050 VCW-3050 5” 3/8” 5/8”
VCW-1051 VCW-2051 — 5” 1/2” 5/8”
VCW-1052 VCW-2052 — 5” 3/4” 5/8”
VCW-1060 VCW-2060 VCW-3060 6” 7/16” 11/16”
VCW-1061 VCW-2061 VCW-3061 6” 1/2” 11/16”
VCW-1062 VCW-2062 VCW-3062 6” 9/16” 11/16”
VCW-1063 VCW-2063 VCW-3063 6” 5/8” 11/16”
VCW-1064 VCW-2064 VCW-3064 6” 3/4” 11/16”
VCW-1070 VCW-2070 VCW-3070 7” 9/16” 3/4”
VCW-1071 VCW-2071 VCW-3071 7” 5/8” 3/4”
VCW-1072 VCW-2072 — 5” 3/4” 3/4”
VCW-1080 VCW-2080 VCW-3080 8” 9/16” 7/8”
VCW-1081 VCW-2081 VCW-3081 8” 5/8” 7/8”
VCW-1082 VCW-2082 VCW-3082 8” 3/4” 7/8”
VCW-1090 VCW-2090 VCW-3090 9” 9/16” 15/16”
VCW-1091 VCW-2091 VCW-3091 9” 5/8” 15/16”
VCW-1092 VCW-2092 — 9” 11/16” 15/16”
VCW-1093
VCW-1094
VCW-2093
VCW-2094
VCW-3093
VCW-3094
9”
9”
3/4” 15/16”
7/8” 15/16”
HANDWHEEL-TO-SOLID ROD ADAPTERS
VCW-1100 VCW-2100 — 10” 9/16” 1”
Part No. A B C D E F
VCW-1101 VCW-2101 — 10” 5/8” 1”
Steel Stainless Dia. Sq. Dia. Thread
VCW-1102 VCW-2102 — 10” 11/16” 1”
VCW-1103 VCW-2103 VCW-3103 10” 3/4” 1” VCA-1100 VCA-2100 1/2” 3/4” 1” 1-1/8 3-5/16” 5/8” (11)
VCW-1104 VCW-2104 — 10” 7/8” 1” VCA-1150 VCA-2150 5/8” 3/8” 1” 15/16 2-3/8” 5/16” (18)
VCW-1111 VCW-2111 VCW-3111 11” 11/16” 1-1/16” VCA-1151 VCA-2151 5/8” 7/16” 1” 15/16 2-3/8” 3/8” (16)
VCW-1120 VCW-2120 — 12” 9/16 1-1/8” VCA-1152 VCA-2152 5/8” 9/16” 1” 15/16 2-13/16” 1/2” (13)
VCW-1121 VCW-2121 — 12” 5/8 1-1/8”
VCA-1153 VCA-2153 5/8” 5/16” 1” 15/16 2-3/8” 1/4” (20)
VCW-1122 VCW-2122 VCW-3122 12” 3/4” 1-1/8”
VCW-1123 VCW-2123 — 12” 1 1-1/8” VCA-1154 VCA-2154 5/8” 3/4” 1” 15/16 2-13/16” 5/8” (11)
VCW-1140 VCW-2140 VCW-3140 14” 3/4” 1-5/16” VCA-1200 VCA-2200 3/4” 9/16” 1-1/4” 1-1/8” 3-1/16” 1/2” (13)
VCW-1141 VCW-2141 — 14” 7/8” 1-5/16” VCA-1201 VCA-2201 3/4” 5/8” 1-1/4” 1-1/8” 3-3/8” 1/2” (13)
VCW-1142 VCW-2142 — 14” 1-1/8” 1-5/16” VCA-1202 VCA-2202 3/4” 3/4” 1-1/4” 1-1/8” 3-3/8” 5/8” (11)
VCW-1143 VCW-2143 — 14” 1-3/16” 1-5/16”
VCA-1300 VCA-2300 1” 3/4” 1-1/2” 1-1/2” 3-13/16” 5/8” (11
VCW-1160 VCW-2160 — 16” 1-3/16” 1-5/16”
VCW-1161 VCW-2161 — 16” 1-3/8” 1-5/16” VCA-1301 VCA-2301 1” 3/4” 1-5/8” 1-5/8” 3-13/16” 5/8” (11)
VCW-1180 VCW-2180 — 18” 1” 1-5/8” VCA-1302 VCA-2302 1” 1-3/16” 1-3/4” 1-1/2” 5-1/16” 1” (8)
VCW-1181 VCW-2181 — 18” 1-3/8” 1-5/8” VCA-1400 VCA-2400 1-1/4” 3/4” 2” 2” 4-3/8” 5/8” (11)
VCW-1182 VCW-2182 — 18” 1-3/4” 1-5/8” VCA-1401 VCA-2401 1-1/4” 3/4” 2” 2” 4-1/4” 5/8” (11)
VCW-1210 VCW-2210 — 21” 1-3/16” 1-7/8”
VCA-1402 VCA-2402 1-1/4” 1” 2” 2” 5-5/8” 1” (8)
VCW-1211 VCW-2211 — 21” 1-3/8” 1-7/8”
VCW-1240 VCW-2240 VCW-3240 24” 1-3/8” 2-1/16” VCA-1403 VCA-2403 1-1/4” 1-3/16” 2” 2” 5-5/8” 1” (8)
VCW-1241 VCW-2241 — 24” 1-1/2” 2-1/16” VCA-1404 VCA-2404 1-1/4” 1-3/8” 2” 2” 6-1/16” 1-1/8” (7)
VCW-1270 VCW-2270 VCW-3270 27” 1-3/16” 2-1/4” VCA-1500 VCA-2500 1-1/2” 1-3/16” 2” 2” 5-5/8” 1” (8)
VCW-1271 VCW-2271 VCW-3271 27” 1-3/8” 2-1/4” VCA-1501 VCA-2501 1-1/2” 1-3/8” 2” 2” 6-1/16” 1-1/8” (7)
VCW-1300 VCW-2300 — 30” 1-7/16” 2-1/2”
VCW-1301 VCW-2301 — 30” 1-3/4” 2-1/2”
VCW-1360 VCW-2360 — 36” 1-3/8” 3”

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0340-04 5/1/06 7:18 PM Page 1

352-06

BFG MARINE, INC.

STUFFING BOXES
Rigid Rod
Lubricated type for use with moving shafts.
With grease gland and zerk fitting.

Part No. Size A Hex B Approx. Wt. Description Material Lube Non-Lube
VCS-1100 1/2 1-3/4 1-1/8 1-3/4 lbs. Body C. R. Steel x x
VCS-1200 3/4 2-1/8 1-1/2 2-3/4 lbs. Packing Nut Bronze x x
VCS-1300 1 2-3/8 1-3/4 3-5/8 lbs. Gland Bronze x
VCS-1400 1-1/4 2-3/8 2 3-3/4 lbs. Bushing Bronze x
VCS-1500 1-1/2 2-3/8 2-1/2 6 lbs. Packing Furnished by Customer

Flexible Shaft
Description Material
Part No. Size A (Max) B C Body Steel
VCS-2100 1/1 6 1-3/4 3-11/16 Split follower Bronze
VCS-2200 3/4 6 2-1/8 3-11/16 Retainer Ring Bronze
VCS-2300 1 6-1/2 2-1/2 4-3/16 Lock Nut Bronze
VCS-2400 1-1/4 7 2-3/4 4-11/16 Nut Bronze
VCS-2500 1-5/8 9 3-1/4 6-11/16 Packing Furnished by Customer

BRONZE VALVE YOKES


B
Number A SQ. C D E F G H
VCY-2100 .50 .31 1.00 .50 1.00 .25 3.00 2.50
VCY-2101 .50 .28 1.00 .50 1.00 .25 3.00 2.50
VCY-2200 .50 .34 1.25 .62 1.25 .38 3.88 2.75
VCY-2201 .50 .38 1.25 .62 1.25 .38 3.88 2.75
VCY-2202 .62 .50 1.25 .62 1.25 .38 3.88 2.75
VCY-2203 .62 .38 1.25 .62 1.25 .38 3.88 2.75
VCY-2204 .62 .44 1.25 .62 1.25 .38 3.88 2.75
VCY-2205 .75 .38 1.25 .62 1.25 .38 3.88 2.75
VCY-2206 .75 .44 1.25 .62 1.25 .38 3.88 2.75
VCY-2300 .75 .56 1.50 .88 1.75 .44 4.62 3.38
VCY-2301 .75 .62 1.50 .88 1.75 .44 4.62 3.38
VCY-2302 1.00 .56 1.50 .88 1.75 .44 4.62 3.38
VCY-2303 1.00 .62 1.50 .88 1.75 .44 4.62 3.38
VCY-2400 1.00 .75 1.75 1.12 2.25 .56 5.88 4.12
VCY-2401 1.25 .75 1.75 1.12 2.25 .56 5.88 4.12
VCY-2500 1.25 1.00 2.00 1.50 2.50 .62 7.00 4.75
VCY-2501 1.25 1.25 2.00 1.50 2.50 .62 7.00 4.75
VCY-2502 1.50 1.00 2.00 1.50 2.50 .62 7.00 4.75
VCY-2503 1.50 1.25 2.00 1.50 2.50 .62 7.00 4.75

All dimensions in inches

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0341-04 5/1/06 7:19 PM Page 339

353-06

BFG MARINE, INC.


DECK/FLOOR STAND OPERATORS WITH INDICATION
Bill of Materials
Deck Stands are used to raise handwheels to Description Material
comfortable operating heights, and also provide Housing Steel
indication for valve position. They are available Spindle Stainless Steel
in two sizes to accommodate various conditions. Bearing, Upper Bronze
An adjustable packing gland is built in to provide Bearing, Lower Bronze
a watertight penetration. They can be welded or Stuffing Tube Steel
bolted into place. Packing Nut Bronze
Indicator Nylon
Handwheel Adapter Stainless Steel
Packing Gland Brass

F G Usable Turns
Number Type A B C D E SQ THD Turns
6” diameter
VCDS-1400 3/4” Rod 14.00 8.00 10.00 8.00 .75 .75 5/8”-11 28
bolt circle
VCDS-1401 1” Rod 14.00 8.00 10.00 8.00 1.00 .75 5/8”-11 28 4 holes
VCDS-2400 3/4” Rod 24.00 6.50 10.00 8.00 .75 .75 5/8”-11 40 / 170 (Optional) 11/16”
VCDS-2401 1” Rod 24.00 6.50 10.00 8.00 1.00 .75 5/8”-11 40 / 170 (Optional) diameter
VCDS-2402 1-1/4” Rod 24.00 6.50 10.00 8.00 1.25 .75 5/8”-11 40 / 170 (Optional)

DECK BOX WITH INDICATOR


This deck box is a watertight operator designed to provide a flush mounted point of operation for valves through floors, walls, bulkheads
and decks. The indicator mechanism is protected from the environment even with the cover removed. Multi-Turn w/ Turn-Specific
Indication (40 turn max.), 360° or 90° Open/Closed indication is available. Both weld-in and bolt-on models are offered (bolt-on flange is
supplied unattached for easy adaptation to specific conditions). A locking device is available which can make the deck box tamper proof.
Cam-Lock threadless cover design resists jamming or seizing in harshest environments.

1000, 3000 & 5000 Series 2000, 4000 & 6000 Series
Locking Device Available
Multi-Turn 360° Indication 90° Indication Weld Type Add -L to part number for locking device
A B C D E F
Part No. † Part No. Part No. Size
Description Material
VCDB-1110 VCDB-3110 VCDB-5110 5/8” Rod 5.72 3.38 4.88 2.25 0.62 1.31
Housing Bronze
VCDB-1200 VCDB-3200 VCDB-5200 3/4” Rod 5.72 3.38 4.88 2.25 0.75 1.50
Weld Sleeve* Steel
VCDB-1300 VCDB-3300 VCDB-5300 1” Rod 5.72 3.38 4.88 2.25 1.00 1.50
Cover Mang. Bronze
VCDB-1400 VCDB-3400 VCDB-5400 1-1/4” Rod 5.72 3.38 4.88 2.25 1.25 1.88 Assembly & Cres
VCDB-1500 VCDB-3500 VCDB-5500 1/2” Flex 5.72 3.38 4.88 1.19 0.38 0.81 Indicator Cover Polycarbonate
VCDB-1600 VCDB-3600 VCDB-5600 3/4” Flex 5.72 3.38 4.88 1.50 0.56 1.31 Indicator Pin Cres
VCDB-1700 VCDB-3700 VCDB-5700 1” Flex 5.72 3.38 4.88 1.81 0.75 1.31 Indicator Nut Brass
VCDB-1800 VCDB-3800 VCDB-5800 1-1/4” Flex 5.72 3.38 4.88 2.12 1.00 1.31 Indicator Ring Brass
Ind. Nut Track Pin Cres
Multi-Turn 360° Indication 90° Indication Bolt Type Spindle Mang. Bronze
A B C D E F G
Part No. † Part No. Part No. Size
Thrust Bearing Steel
VCDB-2110 VCDB-4110 VCDB-6110 5/8” Rod 5.72 3.38 4.88 2.25 0.62 1.31 7.25
Thrust Washer Steel
VCDB-2200 VCDB-4200 VCDB-6200 3/4” Rod 5.72 3.38 4.88 2.25 0.75 1.50 7.25
O-Rings Buna-N
VCDB-2300 VCDB-4300 VCDB-6300 1” Rod 5.72 3.38 4.88 2.25 1.00 1.50 7.25
Retaining Rings Cres
VCDB-2400 VCDB-4400 VCDB-6400 1-1/4” Rod 5.72 3.38 4.88 2.25 1.25 1.88 7.25
Cap Screws** Steel
VCDB-2500 VCDB-4500 VCDB-6500 1/2” Flex 5.72 3.38 4.88 1.19 0.38 0.81 7.25
Woodruff Key Steel
VCDB-2600 VCDB-4600 VCDB-6600 3/4” Flex 5.72 3.38 4.88 1.50 0.56 1.31 7.25
VCDB-2700 VCDB-4700 VCDB-6700 1” Flex 5.72 3.38 4.88 1.81 0.75 1.31 7.25
*S.S. Weld Sleeve Add “-316”
VCDB-2800 VCDB-4800 VCDB-6800 1-1/4” Flex 5.72 3.38 4.88 2.12 1.00 1.31 7.25
**S.S. For “-316” Models
All dimensions in inches. †When ordering add a dash & turns required (2 digits), e.g. 1” x 25 turns = VDCDB-1300-25; 3/4” x 9 turns = VCDB-1200-09

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
348 5/1/06 7:20 PM Page 1

354-06

SIMPLEX BASKET STRAINERS


Model 72 – 3/8” to 8” – Bronze, Stainless Steel, Carbon Steel, Iron

It has an unusually large basket


capacity. The free straining area
is at least 6 times the cross-
sectional pipe area. No tools are
needed to open the cover. The
quick opening, swinging yoke can
be disassembled and the basket
removed in seconds. On sizes 4”
and larger, a special cover clamp
is provided to distribute the
seating pressure and insure
positive seating of the cover.
there is a threaded drain (fitted
with a plug) which can be used as
a backwash connection, if desired.
Sizes 2” and larger are provided
with legs for bolting to the floor.

Model 72 Strainer – Designed for use where


temporary shutdown for cleaning is possible

Material Pressure Rating End Connections


at 100°F Screwed Flanged
Iron 200 psi WOG NPT Threads 125 lbs. ANSI
Dimensions
Bronze 200 psi WOG NPT Threads 150 lbs. ANSI
Dimensions Threaded – 3/8” - 3”

Stainless 150 lbs. ANSI


Steel 200 psi WOG NPT Threads Dimensions
Carbon 150 lbs. ANSI
Steel 200 psi WOG NPT Threads Dimensions
Materials shown are standard.

All Wetted Exterior Cover


Type Parts Trim Baskets Gaskets
ASTM A-126
Iron Class 30 bodies, Ductile Brass, SS Buna-N
bonnets and Iron or Montel
covers.
Bronze ASTM B-62 Ductile Brass, SS Buna-N
valve bronze Iron or Monel
Stainless ASTM A-351 Ductile SS or Viton-A
Steel Grade CF-8M Iron Monel
Type 316
Carbon ASTM A-216 Ductile SS or Buna-N Flanged – 2” - 8”
Steel Grade WCB Iron Monel
carbon steel

MARINE FITTINGS
& FLANGES
Valve automation
W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics 3485 Evergreen Ave. • Jacksonville, FL 32206 - Hose Valves
& controls
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
349 5/1/06 7:21 PM Page 1

355-06

Model 72 – 3/8” to 8” – Cast Iron, Bronze, Stainless Steel, Carbon Steel


Net Weight (lbs.)
Pipe Stain- Carbon
Size Iron Bronze less Steel A B C D E F G H I J K
3/8 4 4 – – 4 6-5/8 2-7/8 4 2-3/8 11 3/8 – – – –
1/2 4 4 – – 4 6-5/8 2-7/8 4 2-3/8 11 3/8 – – – –
3/4 7 8 – – 5-3/8 8-3/8 4 5 3-1/16 13 1/2 – – – –
THREADED

1 7 8 7 7 5-3/8 8-3/8 4 5 3-1/16 13 1/2 – – – –


1-1/4 12 13 – – 6-3/4 9-7/8 4-7/8 5-7/8 3-7/8 14 1/2 – – – –
1-1/2 15 16 16 15 7-3/8 11 4-7/8 7-1/8 4 16 3/4 – – – –
2 28 32 31 36 10-1/2 13-3/8 6-3/4 7-5/8 5-1/8 21 1-1/4 – – – –
2-1/2 42 49 51 52 10-1/2 14-7/8 8 8-5/8 6-3/8 26 1-1/2 – – – –
3 52 60 60 60 11-5/8 17 8 11-1/4 6-5/8 28 1-1/2 – – – –

2 36-1/2 49 36 36 10-1/2 13-3/4 6-3/4 7-5/8 5-1/8 6-1/4 1/2 20 3/8 5-1/2 2-1/2
2-1/2 54 64 63 63 11-5/8 15-5/8 8 8-3/4 6-3/8 7-5/8 1/2 23 7/16 6-1/2 2-7/8
3 76 85 – – 13-1/8 18 8 10-5/8 6-1/2 8 1/2 27 7/16 7 3-1/8
FLANGED

3 – – 86 86 13-1/8 18-3/4 8 12 6-1/2 8 1/2 27 7/16 7 3-1/8


4 125 140 – – 16-3/4 19-7/8 10-3/4 10-3/4 9-5/8 11-3/8 1/2 30 9/16 10 3-7/8
4 – – 130 130 17-1/4 19-7/8 10-3/4 10-3/4 9-1/4 11-3/8 1/2 30 9/16 10 3-7/8
5 170 182 – – 18-1/8 25-1/8 10-3/4 15-1/4 10 11-3/8 1/2 41 9/16 10 4-5/8
6 200 270 235 235 19-5/8 28-1/8 10-3/4 18-3/8 10 11-3/8 1/2 46 9/16 10 5
8 500 600 550 550 27 40-1/2 – 27 13-3/4 17-1/2 1/2 60 9/16 15-3/4 8-5/8
These dimensions are for reference only. For installation purposes, request certified drawings.

Model 72 – 10” to 18” – Cast Iron, Ductile Iron, Bronze

G Dia.
Mounting Holes
(2) Places

Special Basket Design


By convoluting (pleating) the
Flanged End Connection perforated sheet, the screening
area is increased while reducing
in sizes from 10” to 18”.
the total basket size.

Dimensions (Inches)
Net Weight (lbs.)
Pipe Cast Iron A B C D E F G H I
Size & Ductile Bronze
10 420 500 23 11 19 47-1/2 29 12-3/16 1 15/16 1-1/2
12 550 825 27 13 23 67 38 16-3/4 1 1 1-1/2
14 850 1150 31 15-1/2 27 77 44-1/2 18-3/4 1 1 1-1/2
16 975 1400 31 15-1/2 27 77 44-1/2 18-3/4 1 1 1-1/2
18 1000 1450 31 15-1/2 27 77 44-1/2 18-3/4 1 1 1-1/2
These dimensions are for reference only. For installation purposes, request certified drawings.

STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK 3485 Evergreen Ave. • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
valve automation
Tel: 800-962-9696 • 904-354-3800
CHARLESTON SAN DIEGO • LONG BEACH
JACKSONVILLE & controls
Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
350 5/1/06 7:22 PM Page 1

356-06

Model 50 – DUPLEX BASKET STRAINERS


Sizes up to 8” – Iron, Bronze, Stainless Steel, Carbon Steel

This type of strainer is actually a high quality, pressure-rated


plug valve with integral straining baskets. Switching flow
from one basket to another is accomplished by moving the
handle through a 90° arc. It is impossible for this operation
to stop the flow because of the port design in the diverter
plug. The entire switching operation takes less than 30
seconds. No tools are needed. The plug is automatically
positioned each time in exactly the right spot by integral
stops.

The top handle is rotated. A lifting jack raises the diverter


plug off its seat. The plug handle is moved 90°. The top
Illustration of flow direction through a
handle is rotated again and the plug is reseated. Because
typical Plug Type Duplex Basket Strainer of the mechanical lifting jack, the plug lifts and sets easily,
even under high pressure. A built-in stop limits the distance
the diverter plug can be raised. This minimizes the
possibility of material bypassing the plug while it is rotated.
It also prevents debris from building up under the plug and
making it difficult to reseat.

The strainer covers feature quick opening, swing away yoke


design. No tools are required to remove the strainer basket.
Each basket compartment has a side drain outlet, and all
strainers are provided with legs for bolting to the floor.

All Wetted Exterior Cover Stem End Connections


Type Parts Trim Baskets O-rings O-rings Pressure Rating
Material at 100°F Screwed Flanged
ASTM-126
Iron bodies, bonnets Ductile Brass, SS Buna-N Buna-N Iron 200psi WOG NPT Threads 125 lbs. ANSI
and covers Iron or Monel Dimensions
Bronze Diverter Plug Bronze 200 psi WOG NPT Threads 150 lbs. ANSI
Bronze ASTM B-62 Ductile Brass, SS Buna-N Buna-N Dimensions
Valve bronze Iron or Monel Stainless 200 psi WOG NPT Threads 150 lbs. ANSI
Stainless ASTM 351 Grade Ductile CSS or Viton-A Viton-A Steel Dimensions
Steel CF-8M type 316 Iron Monel Carbon 200 psi WOG NPT Threads 150 lbs. ANSI
ASTMA-216 Steel Dimensions
Carbon Grade WCB Ductile SS or Buna-N Buna-N
Steel Carbon Steel Iron Monel Materials shown are standard.
Bronze Diverter plug
Can be furnished to MIL Spec. Standards – Please specify if required.

MARINE FITTINGS
& FLANGES
Valve automation
W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics 3485 Evergreen Ave. • Jacksonville, FL 32206 - Hose Valves
& controls
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
351 5/1/06 7:23 PM Page 1

357-06

Model 50 - DUPLEX BASKET STRAINERS

Threaded 3/4” -2-1/2” Flanged 1” - 4” Flanged 5” - 8”

Net Weight (lbs.)


Pipe Stain- Carbon
Size Iron Bronze less Steel A B C D E F G H I J K Dia.
3/4, 1 26 33 31 31 11 10-1/8 5 5-1/2 1/4 14-3/4 8 4-1/2 12-1/2 8 1-7/16 11/32
THREADED

1-1/4, 1-1/2 57 64 62 62 15 13-15/16 6-15/16 7-1/2 1/4 18-3/4 8 5-1/2 15 8 1-9/16 7/16
2 110 120 109 109 18-5/8 17-3/8 8-3/8 10 3/8 24 8-1/2 7-11/16 20 16 1-15/16 9/16
2-1/2 124 123 – – 18-5/8 17-3/8 8-3/8 10 3/8 24 8-1/2 7-11/16 20 16 1-15/16 9/16

1 31 38 36 36 11 10-1/8 5 6-7/8 1/4 14-3/4 8 4-1/2 12-1/2 8 1-7/16 11/32


1-1/2 66 74 72 72 15 13-15/16 6-13/16 9-3/8 1/4 18-3/4 8 5-1/2 15-3/8 8 1-9/16 7/16
2 122 133 122 122 18-5/8 17-3/8 8-3/8 10-5/8 3/8 24 8-1/2 7-11/16 20-1/8 16 1-15/16 9/16
2-1/2 142 143 145 145 18-5/8 17-3/8 8-3/8 10-3/4 3/8 24 8-1/8 7-11/16 20-1/8 16 1-15/16 9/16
3 193 231 204 204 22 20-3/4 8-7/8 13-1/2 1/2 25-1/4 8-1/2 8-15/16 21-3/8 16 2-1/2 9/16
FLANGED

4 285 283 300 315 23 21-1/2 13-1/4 16 1/2 35 9-1/2 8-15/16 27-1/8 18 3 9/16
5 403 412 – – 26 17-1/4 14-3/4 18-3/8 3/8 41 19-3/4 10-1/4 33-1/4 – 9-3/4 9/16
6 500 – – – 32 20-3/4 19-1/2 22 3/8 42 19-3/4 11-3/4 34-1/4 – 12-1/2 5/8
6 – 583 – – 32 21-1/4 15-1/8 21-1/2 3/8 42 19-3/4 11-3/4 34-1/4 – 12-1/2 5/8
6 – – 615 – 31-1/4 20-3/4 18-1/2 22 3/8 42 19-3/4 11-3/4 35 – 12-1/2 5/8
6 – – – 580 31-1/4 20-3/4 18-1/2 22 3/8 42 19-3/4 11-3/4 35 – 12-1/2 5/8
8 1500 1800 1670 1610 45-1/2 30-3/4 23 25 1/2 56 28-1/8 – 50-5/8 – 17 15/32
Can be furnished to MIL Spec Standards -- Please specify if required. Dimensions are in inches.
These dimensions are for reference only. For installation purposes, request certified drawings.

STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK 3485 Evergreen Ave. • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
valve automation
Tel: 800-962-9696 • 904-354-3800
CHARLESTON SAN DIEGO • LONG BEACH
JACKSONVILLE & controls
Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
352 5/1/06 7:24 PM Page 1

358-06

Y-STRAINERS

ANSI Rating End Connection


Type Material Pipe Size-In. 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8 10
MODEL 85
Threaded Carbon Steel A 3.00 3.00 3.00 3.75 4.63 5.00 5.83 7.00 - - - - - -
or Socket or B 3.00 3.00 3.00 3.50 4.00 4.63 5.25 5.75 - - - - - -
Weld Stainless Steel C 4.00 4.00 4.00 4.75 5.75 6.50 7.50 8.75 - - - - - -
600 lb. Net Wt. Lbs. 2 2 2 4 6 8 10 15 - - - - - -
Flanged Carbon Steel A - - 5.00 5.63 6.38 7.25 8.88 7.88 9.75 10.00 12.13 18.50 21.63 26.00
Bolted or B - - 2.75 3.00 3.62 4.25 5.75 6.00 6.50 7.25 9.75 14.25 18.00 22.25
Cover Stainless Steel C - - 3.50 4.00 5.00 5.75 6.50 8.25 9.25 10.50 14.75 21.00 26.75 33.75
150 lb. Net Wt. Lts. - - 5 7 9 14 18 16 25 35 70 130 240 300
Flanged Carbon Steel A - - 5.25 6.00 6.88 7.75 9.38 8.63 10.63 12.00 14.50 20.00 23.38 27.38
Bolted or B - - 2.75 3.00 3.62 4.25 5.75 6.25 7.00 7.75 10.50 14.75 18.75 22.75
Cover Stainless Steel C - - 3.50 4.00 5.00 5.75 6.50 8.25 9.25 10.50 14.75 21.00 27.00 34.50
300 lb. Net Wt. Lbs. - - 6 9 13 18 24 30 40 55 105 200 360 430
Dimensions are in inches.

Mesh or perforated screens available for


the above in the following sizes:
Standard Perf. (Stainless Steel): .033, .045, .057, .125, .156
Standard Mesh (Stainless Steel): 20, 40, 60, 80, 100

MARINE FITTINGS
& FLANGES
Valve automation
W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics 3485 Evergreen Ave. • Jacksonville, FL 32206 - Hose Valves
& controls
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
353 5/1/06 7:24 PM Page 1

359-06

FABRICATED SIMPLEX STRAINERS


MODEL 90
Strainers are available in Carbon Steel, Stainless Steel, Stainless Steel and Copper Nickel 90/10; specify which
material is required when ordering.
Bolted blind Quick opening hinged

Basket material: 304 stainless steel,


1/16” to 1/4” perforation diameter.

CLEARANCE FOR CLEARANCE FOR


BASKET REMOVAL BASKET REMOVAL

ANSI FLANGED CONNECTIONS

Dimensions (Inches) Net Weight (lbs.) Dimensions (Inches) Net Weight (lbs.)

A B C D E Class 150 Class 300 A B C D E Class 150 Class 300


Nom. Class Class Class Class NPT Nom. Class Class Class Class Cover Unit Cover Unit
Size 150 300 150 300 Cover Unit Cover Unit Size 150 300 150 300 ** **

4 16 16 14 9-1/2 10-1/4 1 21 45 147 81 219 4 16 16 14 10-3/4 10-3/4 1 21 9 122 9 158

5 16 17-1/2 15 9-1/2 10-1/4 1 22 45 153 81 237 5 16 17-1/2 15 11-1/4 11-1/4 1 22 9 128 9 176

6 20 21 17 10 10-3/4 1 24 70 203 127 328 6 20 21 17 12 12 1 24 12 168 12 236

8 22 23 21 11 12 1-1/2 28 110 281 184 407 8 22 23 21 13-1/4 13-1/4 1-1/2 28 15 226 15 278

10 32 33 25 12 13 1-1/2 33 170 450 307 710 10 32 33 25 14-1/2 14-1/2 1-1/2 33 30 360 30 483

12 35 36 28 14 15 1-1/2 39 209 644 390 1024 12 35 36 28 15-3/4 15-3/4 1-1/2 39 37 535 37 734

14 37 38 33 15 16 2 45 272 951 492 1397 14 37 38 33 16-1/2 16-1/2 2 45 46 804 46 1030

16 42 43 36 16 17 2 49 411 1409 754 2011 16 42 43 36 17-3/4 17-3/4 2 49 68 1188 68 1437

18 42 43 39 17 18-1/2 2 53 411 1486 754 2127 18 42 43 39 19 19 2 53 68 1255 68 1553

20 43 44-1/2 44 18 19-1/2 2 59 411 1553 754 2231 20 43 44-1/2 44 21 21 2 59 71 1322 71 1656

24 48 49-3/4 60 21 22-1/2 2 78 681 2291 1403 3497 24 48 49-3/4 60 22-1/2 22-1/2 2 78 88 1860 88 234
**Force required to lift cover in lbs.

STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK 3485 Evergreen Ave. • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
valve automation
Tel: 800-962-9696 • 904-354-3800
CHARLESTON SAN DIEGO • LONG BEACH
JACKSONVILLE & controls
Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
0348-04 5/1/06 7:25 PM Page 1

360-06

PRES-VAC ENGINEERING A/S


AUTOMATIC WEIGHTLOADED PRESSURE-VACUUM VALVES
Opening Standard: Pressure-2 PSI, Vacuum-0.5 PSI. For other settings, please specify.
When ordering, specify bronze, cast iron or stainless steel housing, and bronze or stainless steel trim.
Type 1500-FLS Approved by U.S. Coast Guard.
End-of-line pressure/vacuum relief valve for openings used Type 1500-FLS is a weightloaded end-of-line pressure/vacuum relief valve intended
during cargo operation and for breathing during voyage. for openings used during cargo operation, ballasting or voyage for thermal variation
Mainly for use in common venting systems and for barges (and sloshing). The valve has separate pressure and vacuum units. Outlet to
not subject to IMO or ADNR regulations atmosphere is available with vertical efflux and flame screens (in an explosion safe
execution) to comply with IMO requirements, thus acceptable for use on new
tankers. Installation requirements are 2 m or 6 m height depending on application.
For use only on exclusively inerted vessels.
Approved by the U.S.C.G.
for VECS.
Certified by Danish
government according to ød ød A H D P Holes
inch mm mm mm (dia.) (B.C.) (qty. - dia.)
IMO MSC/Circ. 677.
Approved as per API 2000. 10 250 555 890 400 360 (12) - 25
8 200 465 780 345 295 (8) - 22
6 150 350 650 275 240 (8) - 22
5 125 310 620 250 215 (8) - 22
4 100 260 565 225 190 (8) - 20
3 80 240 460 190 150 (4) - 20
2-1/2 65 210 450 175 138 (4) - 20

Type 1500-FLF
Angle type In-line Valve The angle type pressure/vacuum relief valve type 1500-FLF operates through the header in common venting
systems or, in smaller versions, through the branch pipe. It is designed to relieve pressure and vacuum during
loading, discharging, voyage (thermal variation and sloshing) and ballasting. Cargo operation is possible with
the valve in automatic and manual mode, provided of course that the IG pressure is monitored or controlled.
The downstream outlet should be through an approved device to prevent the passage of flame according to
IMO MSC/Circ. 677.
ød ød øA B C H øD P-mm Holes
inch mm mm mm mm mm mm drilling
Approved by:
16 400 860 480 380 1370 565 515 16 x 25
Lloyd’s Register of Shipping
American Bureau of Shipping 14 350 800 423 335 1150 540 460 16 x 22
Det Norske Veritas 10 250 560 345 255 900 395 350 12 x 22
Bureau Veritas 8 200 470 260 210 790 340 295 8 x 22
U.S.C.G. Cert. No. 6 150 320 196 158 610 285 240 8 x 22
162.017/121/1 4 100 285 155 155 550 220 180 8 x 18
3 80 225 145 125 490 200 160 4 x 18
2-1/2 65 210 120 110 450 185 145 4 x 18
2 50 160 100 100 400 165 125 4 x 18

Type DA Type DA is a combined pressure/vacuum valve, designed to relieve pressure and vacuum
In-line automatic weightloaded pressure/vacuum during loading, discharge, voyage (thermal variation) and ballasting in common venting systems.
relief valves with flame screen protected vacuum The valves can operate in automatic or manual mode. During voyage, the valves operate auto-
units drawing ambient air. matically and relieve pressure or vacuum caused by thermal variations and sloshing. Type DA
features very low pressure drop due to a low number of flow direction changes, especially with
regard to the vacuum unit as pressure drop across the end-of-line flame screen and piping down-
stream is eliminated. Pressure outlet to be through an approved device to prevent the passage of
flame according to IMO MSC/Circ. 677. The vacuum valve is separately approved to 677.
Installation should eliminate the vacuum valve from exposure to waves to keep water from
entering. Water excluding device is optional.

Approved by: ød ød A B H D P-mm Holes


inch mm mm mm mm mm drilling
Lloyds Register of Shipping
Det Norske Veritas 10 250 220 415 585 395 350 12 x 22
Bureau Veritas 8 200 195 355 575 340 295 8 x 22
American Bureau of Shipping 6 150 160 280 500 285 240 8 x 22
USSR Register of Shipping 4 100 140 225 445 220 180 8 x 18
USCG Cert. No. 162.017/122/1 3 80 115 175 425 200 160 8 x 18
2-1/2 65 105 160 410 185 145 4 x 18

A manufacturer of tank venting equipment who offers a complete range


of pressure/vacuum relief valves, venting covers, flame screens and air caps

PRES-VAC ENGINEERING A/S • Svanevang 3-5 • DK-3450 Allerød • Denmark • Tel: +45 4817 4055 • Fax +45 4817 1788
E-mail: presvac@pres-vac.com • Web site: www.pres-vac.com
0349-04 5/1/06 7:28 PM Page 1

361-06

PRES-VAC ENGINEERING A/S


HIGH VELOCITY PRESSURE VACUUM RELIEF VALVES
Available in cast iron, bronze or stainless steel. Please specify when ordering.

Type HS-ISO Certification


FORCE INSTITUTE according to:
High Velocity Vent, 3rd generation equipment, in a patented non-hammering and non-oscillating • IMO MSC/Circ. 1009
execution. Compliance with IMO MSC/Circ. 1009; EN 12874; and ISO 15364 • CE
• EN
Main Features of type HS-ISO • API 2000
• Complies with latest (2001) requirements from IMO, EN, • Major classes (endorsed)
API, and ISO
• Prepared for zero-emission upgrade
• Adjustable blow-down value
DN DN B H
• Full stroke/self closing check lifts with visual indication mm inch mm mm
from the outside as to the position of the discs 50 2 335 470
• Minimum stray emission rates according to ISO 15364 65 2-1/2 360 485
80 3 380 520
• Non-hammering and non-oscillating according to
100 4 410 580
certified service restrictions 125 5 445 640
• No external or internal drains, completely 150 6 480 730
self-draining to tank 200 8 555 790
• Net clearances of unsurpassed levels 250 10 630 830
300 12 705 910
• Inspection and replacement of wear parts without 350 14 775 1050
removing the valve from the point of installation 400 16 850 1115
• Maintenance indicators
• Pressure relief setting is adjustable within pre-fixed range

Type HS-2293-6
High Velocity pressure/vacuum relief vent type HS actively protects the tank, crew Code HS øD øD øK H B P-mm Holes
and environment. Tailor-made to suit each application. Type HS can be used in No. Valve inch mm mm mm mm øF drilling
common and individual systems and in IG systems 32 10 16 400 495 920 695 565 515 16 x ø22
31 10 12 300 495 920 670 445 400 12 x ø22
Certification:
30 10 10 250 495 920 670 395 350 12 x ø22
Certified by the Danish Government’s Maritime
Administration according to IMO MSC/Circ. 373/ 29 8 16 400 450 850 565 565 515 16 x ø22
Rev. 1 for gas group II A, II B-1, II B-2 and II B-3. 28 8 12 300 450 850 565 445 400 12 x ø22
Approved for ADNR vessels and by U.S.C.G. for 27 8 10 250 450 850 565 395 350 12 x ø22
VECS. 26 8 8 200 450 850 565 340 295 8 x ø22
Requirements for Californian waters. Installation 25 7 16 400 450 905 620 565 515 16 x ø25
to be in accordance with IMO MSC/Circ. 731 and 24 7 12 300 450 905 615 445 400 12 x ø22
maximum allowable vent pipe lengths approved 23 7 10 250 450 905 615 395 350 12 x ø22
by the Danish Maritime Administration. Does not 22 7 7 175 450 905 610 315 270 8 x ø22
meet European standard. 21 6 12 300 380 875 580 445 400 12 x ø22
20 6 10 250 380 875 555 395 350 12 x ø22
Main Features of type HS-2293-6 19 6 9 225 380 875 555 370 325 8 x ø22
• Complies with all pre-1995 IMO, VECS and hydro- 18 6 8 200 380 875 555 340 295 8 x ø22
carbon emission regulations and API Standard 2000 17 6 6 150 380 875 555 285 240 8 x ø22
• Only one moving part in each unit 16 5 8 200 310 780 500 340 295 8 x ø22
• Automatic self-closing checklifts 15 5 6 150 310 780 500 285 240 8 x ø22
• Simple, rigid design and construction 14 5 5 125 310 780 500 250 210 8 x ø18
• Available in materials compatible with any cargo; 13 6M 8 200 310 660 450 340 295 8 x ø22
Employs no soft seals 12 6M 6 150 310 660 440 285 240 8 x ø22
• Protects crew from exposure by constant vertical 11 4 6 150 250 620 385 285 240 8 x ø22
efflux at all times without manual adjustment 10 4 5 125 250 620 375 250 210 8 x ø18
• System design engineering available for IMO 9 4 4 100 250 620 375 220 180 8 x ø18
MSC/ Circ.731, Master’s Loading Chart 8 3 6 150 220 550 355 285 240 8 x ø22
7 3 5 125 220 550 340 250 210 8 x ø18
• Easy maintenance
6 3 4 100 220 550 325 220 180 8 x ø18
• Spares readily available
5 3 3 80 220 550 320 200 160 4 x ø18
• Fixed set-point providing nearly 100% accuracy 4 2 4 100 190 500 290 220 180 8 x ø18
• Available in more than 400 configurations 3 2 3 80 190 500 280 200 160 4 x ø18
2 2 2-1/2 65 190 465 220 185 145 4 x ø18
1 2 2 50 190 465 220 165 125 4 x ø18

North American Authorized Agents


GLOBAL SUPPLY COMPANY
590 Ansin Boulevard 5570 Rangeline Road, Suite B
PRES-VAC ENGINEERING A/S Hallandale, Florida 33009 Mobile, Alabama 36619
Tel: (954) 454-1234 • Fax: (954) 454-1244 Tel: (251) 443-6456 • Fax: (251) 443-6458
E-mail: sales@gscusa.com E-mail: scott@gscusa.com
0350-04 5/1/06 7:29 PM Page 1

362-06

PRES-VAC ENGINEERING A/S


Approved by:
WATER EXCLUDING VENT CHECK VALVE Det Norske Veritas
Available in cast iron, bronze or stainless steel. Lloyds Register of Shipping
2" N.B. has ball float; 2-1/2" & up have hollow disc float. Germanischer Lloyd
Bureau Veritas
Type M4 Tank venting and water excluding aircaps. For installation on service tank air pipes.
ABS, U.S.C.G.
USSR Register of Shipping
Nippon Kaiji Kyokai
ød ød A B C H h t P-mm Holes R.I.N.A.
inch mm mm mm mm mm mm mm drilling DOT
16 400 850 915 670 475 565 515 16 x 26 • Stainless steel protecting
12 300 625 745 635 400 445 400 12 x 22 screen
10 250 560 560 175 520 365 395 350 12 x 22 • Polyethylene float
8 200 430 435 140 435 300 340 295 8 x 22 (available in heavy duty
2” to 6” diameter 7 175 380 410 125 395 275 315 270 8 x 22 execution)
6 150 340 340 115 330 230 285 240 8 x 22 • Neoprene seat (other
5 125 280 315 105 290 200 250 210 8 x 18 materials may be specified)
4 100 235 285 95 260 180 220 180 8 x 18 • No class requirements for
3 80 185 220 75 212 145 200 160 4 x 18 spare parts on board
2-1/2 65 170 205 75 190 133 185 145 4 x 18 • Solid one piece castings for
8” to 16” diameter 2 50 130 155 50 195 140 165 125 4 x 18 maximum lifetime

VERTICAL DISCHARGE FLAME SCREENS


Available in cast iron, bronze or stainless steel. Please specify when ordering.
Type EPV 1700-1
For small & medium capacity Type EPV features a very rigid ød ød A B H øF P-mm Holes
design with a relatively low inch mm mm mm mm mm drilling
applications pressure drop when subjected to 12 300 835 170 390 445 400 12 x 22
the typical venting rates associated 10 250 720 160 350 395 350 12 x 22
with riser stacks with diameter 8 200 620 145 290 340 295 8 x 22
ND50 – 300. As required, type 6 150 510 120 235 285 240 8 x 22
EPV features drainage ports. The 5 125 440 115 230 250 210 8 x 18
flame screen unit is well protected 4 100 360 105 205 220 180 8 x 18
against snow and ice - as required 3 80 315 95 195 200 160 4 x 18
by IMO MSC/Circ. 677 and CFR 2-1/2 65 315 95 195 200 160 4 x 18
46, § 154.1722 - and it is easily 2 50 315 95 195 165 125 4 x 18
removed for inspection and
cleaning. It is suitable for end-of- Certified by the Danish government according to IMO MSC/Circ.677.
line systems where it functions at Application is limited to group II A gases. Installation to be in accordance
all times during voyage for thermal with IMO MSC/Circ. 731. Type approved by the leading classification
IMO TypeTest Approved societies and by relevant flag state administrations.
as per IMO MSC / Circ 373
variation and sloshing.

Type VFA 2273-1


For high capacity applications Type VFA features extreme low pressure drop and ød ød øA H P-mm Holes
is designed for high capacity applications such as inch mm mm mm drilling
oil tankers with old-fashioned common venting 16 400 600 275 515 16 x M24
systems. For applications with highly volatile crude 14 350 535 250 460 12 x M20
- typically shuttle tankers where pressure control 12 300 475 225 400 12 x M20
valve type N is used - type VFA features adequate 10 250 420 200 350 12 x M20
drainage ports that are connectable to collection 8 200 360 150 295 8 x M20
facilities. Flame screen unit is easily removable for 6 150 300 120 240 8 x M20
frequent inspection and cleaning as may be needed 5 125 270 105 210 8 x M16
depending primarily on inert gas quality. Type 4 100 230 90 180 8 x M16
VFA is fully approved for exclusively inerted vessels 3 80 210 75 160 4 x M16
and for group II A gases. Typical installation where 2-1/2 65 195 70 145 4 x M16
a high capacity flame screen is used will feature 2 50 170 60 125 4 x M16
either small breather valves (type FLS) on each tank
(common venting) or full sized high velocity vents Certified by the Danish government according to IMO
(type HS-IMO2) on each tank for full safety MSC/Circ. 677. Application is limited to group II A gases.
independent on crew routines (individual venting). Installation to be in accordance with IMO MSC/Circ. 731.
Consequently, the flame screen is not the source of
relief for thermal variation or sloshing.

A manufacturer of tank venting equipment who offers a complete range


of pressure/vacuum relief valves, venting covers, flame screens and air caps

PRES-VAC ENGINEERING A/S • Svanevang 3-5 • DK-3450 Allerød • Denmark • Tel: +45 4817 4055 • Fax +45 4817 1788
E-mail: presvac@pres-vac.com • Web site: www.pres-vac.com
357 5/1/06 7:30 PM Page 1

363-06

FORGED STEEL VALVES Available 1/4" to 2"


SCREWED and SOCKETWELD – COMMERCIAL API-602
Typical Gate
1 Part Name Standard Material Specifications
2 1 Handwheel Nut Carbon Steel
3 2 Name Plate Etched Aluminum
4 3 Handwheel Carbon Steel or Malleable Iron
5 4 Yoke Nut 13% Chr. AISI 416 S.S.
6 5 Gland Nuts Carbon Steel – ASTM – A194 2H
7 6 Gland Flange Carbon Steel –ASTM – A105
8 7 Packing Gland F 316 FIGURE NUMBERS:
9 8 Gland Bolt-Studs 17% Chr. AISI 430 S.S. W-254B 800 lb. Socketweld
10 9 Packing Graphited braided asbestos S-254B 800 lb. Screwed
11 10 Bolts Alloy Steel – ASTM – A193 B7 W-354B 1500 lb. Screwed
12 11 Bonnet Carbon Steel – ASTM – A105 S-354B 1500 lb. Screwed
13 12 Gasket 18/8 – Asbestos – Spiral Wound
14
13 Stem 13% Chr. AISI 410 S.S.
15
14 Seats 13% Chr. AISI 410 S.S. + STELLITE
15 Wedge 13% Chr. AISI 420 S.S
16
16 Body Carbon Steel – ASTM – A105

Typical Globe – Angle


1 1 Handwheel Nut Carbon Steel
2
2 Washer Carbon Steel
3
3 Name Plate Etched Aluminum FIGURE NUMBERS:
4
4 Handwheel Carbon Steel or Malleable Iron GLOBE:
5
5 Yoke Nut Locker Carbon Steel W-274B 800 lb. Socketweld
6
6 Yoke Nut 13% Chr. AISI 416 S.S. S-274B 800 lb. Screwed
7 W-374B 1500 lb. Socketweld
8
7 Stem 13% Chr. AISI 416 S.S.
8 Gland Nuts Carbon Steel – ASTM – A194 2H S-374B 1500 lb. Screwed
9
10
9 Gland Flange Carbon Steel – ASTM – A105
10 Packing Gland F316 ANGLE:
11 W-275B 800 lb. Socketweld
12 11 Gland Bolt-Studs 17% Chr. AISI 430 S.S.
12 Packing Graphited braided asbestos S-275B 800 lb. Screwed
13
13 Bolts Alloy Steel – ASTM – A193 B7 W-375B 1500 lb. Socketweld
14
14 Bonnet Carbon Steel – ASTM – A105 S-375B 1500 lb. Screwed
15
16 15 Gasket 18/8 Asbestos – Spiral Wound
17 16 Stem 13% Chr. AISI 410 S.S. W-234B 800 lb. Socketweld
18 Disc Connecting Ring Type 316L S.S. S-234B 800 lb. Screwed
19 17 Disc 13% Chr. AISI 420 S.S. W-334B 1500 lb. Socketweld
18 Seat Integral Stellited Seat S-334B 1500 lb. Screwed
19 Body Carbon Steel – ASTM – A105

1 Typical Check
2 1 Bolts Alloy Steel – ASTM – A193 B7
3 2 Rivet Carbon Steel
4 3 Name Plate Etched Aluminum
5 4 Bonnet Carbon Steel – ASTM – A105
6
5 Gasket 18/8 Asbestos – Spiral Wound
6 Piston 13% Chr. AISI 420 S.S.
7
7 Seat 13% Chr. AISI 410 S.S.
8
8 Body Carbon Steel – ASTM – A105

FLANGED ENDS – END TO END DIMENSIONS


Model Class 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
F-054B 150 4-1/4 4-5/8 5 5-1/2 6-1/2 7
GATE
F-F F-154B 300 5-1/2 6 6-1/2 7-1/2 7-1/2 8-1/2
F-254B 600 6-1/2 7-1/2 8-1/2 9 9-1/2 11-1/2
F-354B 900-1500 8-1/2 9 10 11 12 14-1/2

Model Class 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"


F-074B 150 4-1/4 4-5/8 5 5-1/2 6-1/2 8
GLOBE F-174B 300 6 7 8 8-1/2 9 10-1/2
F-F
F-274B 600 6-1/2 7-1/2 8-1/2 9-1/2 9-1/2 11-1/2
F-374B 900-1500 8-1/2 9 10 12 12 14-1/2

Model Class 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"


F-074B 150 2-1/8 2-5/16 2-1/2 2-3/4 3-1/4 4
ANGLE
F-174B 300 3-1/2 3-1/2 4 4-1/4 4-1/2 5-1/4
C-F
F-274B 600 3-1/4 3-3/4 4-1/4 4-3/4 4-3/4 5-3/4
F-374B 900-1500 4-1/4 4-1/2 5 6 6 7-1/4

Model Class 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"


F-034B 150 4-1/4 4-5/8 5 5-1/2 6-1/2 8
CHECK
F-134B 300 6 7 8 8-1/2 9 10-1/2
F-F
F-234B 600 6-1/2 7-1/2 8-1/2 9 9-1/2 11-1/2
F-334B 900-1500 8-1/2 9 10 11 12 14-1/2

MARINE FITTINGS
& FLANGES W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics 3485 Evergreen Ave. • Jacksonville, FL 32206 - Hose Valves
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
358 5/1/06 7:31 PM Page 348

364-06

KINGS POINT MACHINERY, INC.


INVERTED VENT CHECK VALVES – 3/4” to 5” – 1027 SERIES
CONNECTIONS: Dimensions (Inches) Body Galv. Steel
Threaded (NPT) Black Steel
A B C D E or Bronze
Flanged (Comm’l) (IPS)
Butt Weld or Cover, Seat, Bronze
3/4 4-5/8 5-1/4 4-1/2 1-1/4 Spacer
Socket Weld 1 4-5/8 5-1/4 4-1/2 1-1/4
WHEN ORDERING Float S.S., Copper
1-1/2 4-5/8 5-1/4 4-1/2 1-1/4 or Monel
PLEASE SPECIFY: 2 7-1/4 7-1/2 6-3/4 2-1/2
1. Body Material Flame Screen S.S. or Monel
2-1/2 7-1/4 7-1/2 6-3/4 2-1/2 Protective Screen
2. Connection 3 7-1/4 7-1/2 6-3/4 2-1/2 Float Rest Screen
3. Float Material 3-1/2 7-3/4 9 8-1/4 3 Cover Toggle Assembly, S.S.
4. With or without 4 8-3/4 9 8-1/4 4 Hinge Pin
Bronze Hinged 5 11-1/2 10 9-1/4 4
Cover

INVERTED VENT CHECK VALVES – 6” & 8” – 1222 SERIES


Fabricated steel body shown –
1222 Series. For cast bronze Body Galv. Steel
Black Steel
body, specify 1225 Series. or Bronze
Butt weld, threaded or flanged. Cover and Spacer Bronze
Both sizes available Float Copper or Monel
without float or cover. Flame Screen S.S.
Protective Screen or Monel
Dimensions (Inches) Seat Ring, Screws, S.S.
Guide Pin,
A B C D E F G Toggle Assembly,
(IPS) Hinge Pin
6 13 8-1/4 9-1/4 7 8 3-1/2
8 15 9-3/8 10-1/2 8 9-1/8 5-5/8

INVERTED VENT CHECK VALVES – 10”, 12” & 14” – 1221 SERIES
Butt weld or flanged. Flanges are Body, Spacer Galv. Steel
ASA-150 lb. standard slip-on type. Cover Black Steel
All sizes available without cover or Float Copper
float. or Monel
Flame Screen, S.S. or
Dimensions (Inches) Protective Screen Monel
A B C D E Seat Ring, Guide Pin, S.S.
(IPS) Screws,
10 19-1/4 9-1/8 10-5/8 3-1/4 Toggle Assembly
Hinge Pin
12 21-3/4 11 12-5/8 4-1/4
14 24-3/4 13 14-3/4 5-1/4

IN-THE-LINE VERTICAL VENT CHECK VALVES


Body Material Bronze or Galv. Steel
Float Material S.S., Monel, or Copper
Dimensions (Inches) Dimensions (Inches) Dimensions (Inches)
Cat No. A B C Cat No. A B Cat No. A B
206-200 2 6 8 207-200 2 8-3/4 208-200 2 8-3/4
206-250 2-1/2 7 8-1/4 207-250 2-1/2 8-3/4 208-250 2-1/2 8-3/4
206-300 3 7-1/2 10-3/4 207-300 3 10-3/4 208-300 3 10-3/4
206-400 4 9 11 207-400 4 11 208-400 4 11
206 FLANGED 207 THREADED 208 BUTT WELD

Kings Point Machinery WE STOCK!


9936 Gould Street, Oakland, CA 94603
Call us or fax your inquiry.
Phone: (510) 638-2712
Fax: (510) 638-3339 Please visit our Website:
E-mail: kingspointmachinery@yahoo.com www.kingspointmachinery.com
359 5/1/06 7:32 PM Page 349

365-06

KINGS POINT MACHINERY, INC.


SCUPPER VALVES
Furnished with or without manual control. Control assembly includes open/closed indicator. Flanges are ASA
150 lb. flat faced, supplied blank unless drilling is specified. Flanges can also be finished to MIL-F-20042 (Navy).
180° – 1018 Series Body Bronze or 90° – 1018 Series
Galv. Steel
Flap, Seat, Stem Bronze or Monel
Cover, Bonnet, Bronze
Open/Closed
Indicator,
Handwheel,
Cleanout Plug
Cap Screws Silicon Bronze
Gasket Neoprene

Outlet Same Size as Inlet Dimensions – Inches Outlet Same Size as Inlet Dimensions – Inches
A & I Dia. 2 2-1/2 3 4 5 6 8 A & E Dia. 2-1/2 3 4 5 6
B & J Dia. 6 7 7-1/2 9 10 11 13-1/2 B & G Dia. 7 7-1/2 9 10 11
D 8 9-1/2 9-1/2 10-1/2 14 15 16 C 1/2 1/2 1/2 5/8 1
E 3/8 9/16 9/16 9/16 5/8 3/4 1 D 12 12 12-7/8 14-3/4 18
G & K Dia. 4-3/4 5-1/2 6 7-1/2 8-1/2 9-1/2 11-3/4 K 5-3/8 5-3/8 6-1/8 6-3/4 8-5/16
L 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2

Outlet Larger Than Inlet Outlet Larger Than Inlet


A Dia. 2-1/2 3 4 5 6 A Dia. 2-1/2 3 4 5 6
B Dia. 7 7-1/2 9 10 11 B Dia. 7 7-1/2 9 10 11
D 8-3/4 8-3/4 9-3/4 11 12 C 0 0 0 0 0
E 0 0 0 0 0 D 10-1/8 10-1/8 11 12-1/4 15
G Dia. 5-1/2 6 7-1/2 8-1/2 9-1/2 E Dia. 4 4 5 6 8
I Dia. 4 4 5 6 8 G Dia. 9 9 10 11 13-1/2
J Dia. 9 9 10 11 13-1/2 K 5-3/8 5-3/8 6-1/8 6-3/4 8-15/16
K Dia. 7-1/2 7-1/2 8-1/2 9-1/2 11-3/4 L 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2

SOUND TUBE DECK CONNECTION


Socket weld shown. If butt weld is required, please specify. Steel “T” wrenches are available.
1009-M Series
Body S.S.
Plug Bronze
Gasket Anchorite 443
Dimensions – Inches
Size A B C D E
1-1/2 1.61 3-5/8 2-5/16 1-1/2 1.92
1-1/2 1.61 3-3/4 2-5/8 1-1/2 1.92
2 2.07 3-3/4 2-5/8 1-1/2 2.41
2 2.07 4-1/4 2-15/16 1-1/2 2.41
2-1/2 2.47 4-3/4 3-7/16 1-1/2 2.91
3 3.07 4-3/4 3-7/16 1-1/2 3.54
3 3.07 5-1/4 3-15/16 1-1/2 3.54
4 4.03 6-1/4 4-15/16 1-1/2 4.56
4 4.03 6-1/2 4-15/16 1-1/2 4.56

Kings Point Machinery WE STOCK!


9936 Gould Street, Oakland, CA 94603 Call us or fax your inquiry.
Phone: (510) 638-2712
Fax: (510) 638-3339 Please visit our Website:
E-mail: kingspointmachinery@yahoo.com www.kingspointmachinery.com
360 5/1/06 7:32 PM Page 350

366-06

Bottom Outlet – 1023 Series KINGS POINT MACHINERY, INC. Right Angle – 1024 Series
Socket Weld – 1023S DECK DRAINS – TRAP TYPE For threaded, specify 1024T.
Both 1023 and
Body Galv. Steel, 1024 drains are 1024S
Bronze Alum. Without
available without The model
Strainer, Baffle, Bronze trap and baffle. closure
Cleanout Plug, 1024 is not
valve
Valve Disc Steel “T” wrench available
Valve Stem Monel available for with valve.
Gasket Neoprene drains
Screws S.S. with closure
valve.
Size
(IPS) Dimensions–Inches
A B C D E F G
1-1/2 5-3/4 5-1/8 4 1.92 4-3/8 3-1/4
1023S W/V 1023S 2 5-3/4 5-1/8 4 2.41 4-3/8 3-1/4
With closure Without closure
valve, no trap valve, with trap
DECK DRAINS – 1017 Series Size
(IPS) Dimensions–Inches REFRIGERATION SPACE DRAIN
A B C D E
Butt Weld – 1220 Series
1-1/2 4-1/2 4 4 1.92 Body, Flanges, Steel,
2 4-1/2 4 4 2.41 Strainer Plate Galv. or
2 5-1/2 5 4 2.41 Supports, Black
2 6-3/4 6 5-1/2 2.41 Reducer
2-1/2 2-1/2 4-1/2 4 2.91 Strainer Plate Bronze
2-1/2 5-1/2 5 5 2.91 Rod Brass
2-1/2 6-1/2 6 5 2.91
Plug Wood,
2-1/2 6-3/4 6 5-1/2 2.91
Epoxy-
3 5-1/2 5 5 3.54
Coated
3 6-3/4 6 5-1/2 3.54
3 7 6-1/2 5-1/4 3.54 Eyebolt, Nut Galv.
3 8-3/4 8 6 3.54 and Washer Steel
4 5-1/2 5 5 4.56
* Dimension “E”, below, shown for
4 6-1/2 6 5-1/2 4.56
standard insulation htickness.
4 6-3/4 6 5-1/2 4.56
Can be modified for special
4 8-3/4 8 6 4.56
installations. Note that changes in
Butt Weld 6 11-3/4 11 12-3/4 6.69
“E” may change “D”.
1017V
Size
Body Steel, Galv. (IPS) Dimensions–Inches
or Black A B C D E F G
Socket Weld
1017S Strainer Plate Bronze 2 5 7-1/2 16-3/8 9-5/8 5-9/16 12
Screws S.S. 2-1/2 5 7-1/2 16-3/8 9-5/8 5-9/16 12
3 5 7-1/2 16-3/8 9-5/8 5-9/16 12

CAST DUCTILE IRON HANDWHEELS

Part No. Dia. Sq. Part No. Dia. Sq. Part No. Dia. Sq. Part No. Dia. Sq. Part No. Dia. Sq.
134-3E 3 9/32 134-6N 6 3/4 134-9K 9 9/16 134-12R 12 1 134-18RN 18 1-3/4
134-3F 3 5/16 134-7H 7 7/16 134-9L 9 5/8 134-12RC 12 1-3/16 134-21RC 21 1-3/16
134-4F 4 5/16 134-7J 7 1/2 134-9N 9 3/4 134-12RG 12 1-3/8 134-21RG 21 1-3/8
134-4G 4 3/8 134-7K 7 9/16 134-9RC 9 1-3/16 134-14N 14 3/4 134-24RG 24 1-3/8
134-5F 5 5/16 134-7L 7 5/8 134-10K 10 9/16 134-14P 14 7/8 134-24RJ 24 1-1/2
134-5G 5 3/8 134-8H 8 7/16 134-10L 10 5/8 134-14RC 14 1-3/16 134-27RC 27 1-3/16
134-5J 5 1/2 134-8J 8 1/2 134-10N 10 3/4 134-14RG 14 1-3/8 134-27RG 27 1-3/8
134-6G 6 3/8 134-8K 8 9/16 134-10RC 10 1-3/16 134-16RC 16 1-3/16 134-30RG 30 1-3/8
134-6H 6 7/16 134-8L 8 5/8 134-10RD 10 1-1/4 134-16RG 16 1-3/8 134-30RH 30 1-7/16
134-6J 6 1/2 134-8N 8 3/4 134-11K 11 9/16 134-18RC 18 1-3/16 134-36RG 36 1-3/8
134-6K 6 9/16 134-9J 9 1/2 134-12N 12 3/4 134-18RG 18 1-3/8

Kings Point Machinery The handwheels above are also available in


9936 Gould Street, Oakland, CA 94603 aluminum, bronze, steel and stainless steel.
Phone: (510) 638-2712 • Fax: (510) 638-3339
E-mail: kingspointmachinery@yahoo.com
Threaded Connections Available
Please visit our Website: www.kingspointmachinery.com WE STOCK! – Call us or fax your inquiry.
361 5/1/06 7:33 PM Page 351

367-06

KINGS POINT MACHINERY, INC.


NAVY DECK DRAINS – BUREAU OF SHIPS DWG. 810-1385789

TYPES D & D-1 TYPE B


TYPES A & A-1 With valve, without trap.
With trap and valve. With trap, without valve.
TYPE A – 2” Seal TYPE D – 2” Seal
TYPE A-1 – 3” Seal TYPE D-1 – 3” Seal Male silbraze connection.
Bronze body with integrally cast steel
welding sleeve. Bronze strainer plate,
Male silbraze connection valve disc and nut. Monel valve stem.
standard. Brass baffle. Copper-nickel screws.
Bronze body with integrally Steel ‘T’ wrench available for 7/16” sq.
cast steel welding sleeve. socket in valve stem.
Bronze strainer plate, valve Specify size and type.
disc and nut. Monel valve
stem. Brass baffle. Copper-
DIMENSIONS – INCHES
nickel screws. Steel ‘T’
wrench available for 7/16” SIZE A B C D
sq. socket in valve stem. 1-1/2 1.900 5 4-19/32 5-9/16
2 2.375 5-9/16 5-5/32 5-29/32
Specify size and type. 2-1/2 2.875 6-5/8 6-5/32 6-3/16
3 3.500 7-5/8 7-3/32 6-5/8

DIMENSIONS – INCHES
2” SEAL 3” SEAL
SIZE A A B C D D D D
Male Female Male Female Male Female TYPE C
1-1/2 1.900 1.905 5 4-19/32 8-5/16 6-13/16 9-5/16 7-13/16
Male silbraze connection.
2 2.375 2.380 5-9/16 5-5/32 8-21/32 7-21/32 9-21/32 8-7/32
Bronze body with integrally cast
2-1/2 2.875 2.882 6-5/8 6-5/32 8-15/16 7-5/8 9-15/16 8-5/8 steel welding sleeve. Bronze
3 3.500 3.507 7-5/8 7-3/32 9-3/8 8-1/8 10-3/8 9-1/8 strainer plate. Copper-nickel
screws.
Specify size, type, and wooden or
steel deck installation

TYPES G & G-1 TYPES H & H-1 DIMENSIONS – INCHES


With trap and valve. With trap, without valve. SIZE A B C D
Style for wooden deck: at
TYPE G – 2” Seal TYPE H – 2” Seal left in drawing. 1-1/2 1.900 4 3-19/32 4-1/2
TYPE G-1 – 3” Seal TYPE H-1 – 3” Seal 2 2.375 4-1/2 4-3/32 4-1/2
Style for steel deck: at right
in drawing. 2-1/2 2.875 5-9/16 5-3/32 4-3/4
90° elbow with female silbraze 3 3.500 6-5/8 6-3/32 4-3/4
connection.
Bronze body with integrally cast
steel welding sleeve. Brass
baffle. Bronze strainer plate,
valve disc and nut, and cleanout TYPE F
plug. Monel valve stem.
Copper-nickel screws. Steel ‘T’ 150 lb. flange connection.
wrench available for 7/16” sq. Aluminum body, strainer plate and
socket in valve stem. screws. Outlet flange drilled to
MIL-F-20042.
Specify size and type.
Specify size and type.
DIMENSIONS – INCHES
DIMENSIONS – INCHES
A B C D D E
SIZE 2” Seal 3” Seal SIZE A-MAX B C D E
1-1/2 1.905 5 4-19/32 7 8 3-3/16 1-1/2 1.770 4 3-19/32 4-9/32 5-1/16
2 2.380 5-9/16 5-5/32 7-9/16 8-9/16 3-9/16 2 2.240 4-1/2 4-3/32 4-11/32 5-9/16
2-1/2 2.882 6-5/8 6-5/32 8-1/16 9-1/16 4-1/8 2-1/2 2.750 5-9/16 5-3/32 4-5/8 6-1/8
3 3.507 7-5/8 7-3/32 8-25/32 9-25/32 4-13/16 3 3.370 6-5/8 6-3/32 5-5/16 6-5/8

Kings Point Machinery Over 40 years of Continued


9936 Gould Street, Oakland, CA 94603 Growth and Customer Satisfaction
Phone: (510) 638-2712
Fax: (510) 638-3339 Please visit our Website:
E-mail: kingspointmachinery@yahoo.com www.kingspointmachinery.com
362 5/1/06 7:34 PM Page 352

368-06

ROBERT H. WAGER CO., INC.

Vertical Vent Check Valve

DESCRIPTION To prevent a spark from igniting


tank fluids or dry cargo dust,
One piece design. Cast in the fine stainless steel flame
galvanized steel or stainless screen arrests flames from
steel. Compact, rugged crossing this barrier.
construction for durability in a
harsh marine environment. The ball float prevents
Available with either a single or contamination of tank cargo by
dual inlet cover. Easy access sea water during heavy seas.
to venting chamber to allow for
cleaning out debris.
Specifications
Body:
Vertical Vent Check Valve (closed)
Steel Galvanized,
FUNCTION Stainless Steel
Sizes:
PURPOSE The Vertical Vent Check Valve 11/2" through 14"
is a “normally open” check Connections:
The Vertical Vent Check Valve valve. In heavy seas, any deck Welded & Flanged – up to 14"
is used to protect tanks and washover will push the float to Threaded – up to 6"
bulkheads from vacuum the closed position, stopping Float Materials:
pressure buildup during water from entering the lower Polyethylene – up to 10"
loading and unloading of liquid Copper* – up to 14"
bulkheads.
and dry cargo. Stainless Steel* – up to 6"
*Available upon request.

Vent Sounding Tube


(Model 133)
Features:
• Stainless Steel Body
Venting Grooves
• Bronze Plug
• Neoprene Gasket
• Wrench: Steel
• Approximate Weight: 3.5 - 6 lbs. Size A B C D
• Connections: Butt Weld, 1-1/2" 3.800 1.95 1.68 2.5" ANSI
tapered pipe
Socket Weld 2" 3.800 2.44 2.00 threads
Bronze Plug Neoprene Gasket S.S. Body 3" ANSI
• Available in aluminum (60-61 2-1/2" 4.750 2.94 2.57
tapered pipe
Grade) with 304 SS plug 3" 4.750 3.56 3.07 threads

**Unique venting grooves allow for the release of trapped


gases without completely removing the plug.

Corporate Office Southern Regional Office


570 Montroyal Road, Rural Hall, NC 27045 6161 Rangeline Rd., Suite A, Theodore, AL 36582
Telephone 336/ 969-6909 Telephone 251/ 443-6552
FAX 336/ 969-6375 FAX 251/ 443-5706
WATS 800/ 562-7024 WATS 800/ 422-0453
Homepage http://www.wagerusa.com Canada 800/ 655-5585 E-mail info@wagerusa.com
363 5/1/06 7:35 PM Page 1

369-06

ROBERT H. WAGER CO., INC.

16" Inverted Vent Check Valve – Model 1700 Only Available in Black or Galvanized Cast Steel.
Copper Float. PVC Cap.

Function: Inverted Vent Check valves protect


tanks and bulkheads from vacuum and pressure
build-up during loading and unloading of liquid or
dry cargo and assures maximum efficiency during
pumping operations. The ball float prevents
contamination of tank fluids or dry cargo by sea
water during heavy seas.

Available in Black or Galvanized 5" – 12" Horizontal In-Line Vent Check Valve
Fabricated Steel, or Stainless Steel. SS or
Copper Float. Connections are Welded Model 1300-H (12" shown)
and Flanged only.

Function: In-line Vent Check Valves protect


tanks and bulkheads in the same way as
standard vent check valves, and should be
used during those operations where vent
lines require in-the-line valves rather than
terminal vents. However, the horizontal
design allows for more flexibility during the
design phase of a piping project

ANTI-SYPHONIC VALVE
(AS Series)

This is a vacuum relief and pressure sealing vent valve for


marine plumbing systems. Using the valve eliminates the
need to install individual vent piping to the atmosphere up
through several decks, which saves space, labor and
weight.

This valve acts as a vacuum breaker. If several toilets are


on the same manifold, suction is created when they are
flushed. This can pull the water seal out of the toilets not
being flushed or out of the sanitary traps in the line and
allow odor to escape. The .75-AS valve opens at 1” of
water vacuum and allows air to enter until the pressure
inside the line and out are equalized, then it closes.

Also serves as a vent sealing valve. If several toilets are


flushed simultaneously, pressure can be created inside
the line, which would force out odors. The .75-AS closes
and seals at only 1” of water pressure to prevent this.

Corporate Office Southern Regional Office


570 Montroyal Road, Rural Hall, NC 27045 6161 Rangeline Rd., Suite A, Theodore, AL 36582
Telephone 336/ 969-6909 Telephone 251/ 443-6552
FAX 336/ 969-6375 FAX 251/ 443-5706
WATS 800/ 562-7024 WATS 800/ 422-0453
Homepage http://www.wagerusa.com Canada 800/ 655-5585 E-mail info@wagerusa.com
0358-04 5/1/06 7:35 PM Page 353

370-06

ROBERT H. WAGER CO., INC.

Tank Air Escape Valves


Models 1600 and 1660
Available in Steel, Stainless Steel, Aluminum, Bronze or Iron —
with or without covers
Connections: Weld, Flanged, Threaded, Socket Weld, or Sil Brazed
Function: Tank Air Escapes serve to allow the free passage of air into tanks, dry cargo holds, or storage spaces…and
prevent vacuum or pressure build-up during pumping operations. Since these valves have no float for automatic
closing, they should be placed in locations which are not accessible to sea water. The fine Monel stainless-steel flame
screen protects tank fluids or dry cargo dust from igniting in the event of deck fires and prevents the entrance of insects
into areas serviced by the valves.
A coarse Monel stainless-steel Protecting Screen, separated from the Flame Screen by a spacer ring, prevents any
mechanical damage to the Flame Screen and acts as a deterrent to clogging this inner screen with paint.

Weld A 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 10 12


Type B 5
3 ⁄8 1
4 ⁄2 3
5 ⁄8 1
6 ⁄4 – 71⁄4 101⁄4 111⁄2 141⁄2 171⁄8 233⁄4
1600-W
C 311⁄32 311⁄32 327⁄32 327⁄32 – 411⁄32 73⁄4 83⁄4 93⁄4 123⁄4 151⁄8
Wt. 21⁄2 31⁄4 41⁄4 5 – 61⁄2 251⁄2 35 62 88 195

Flanged A 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 10 12


5 1 3 1 1 1 1 1 1
Type B 3 ⁄8 4 ⁄2 5 ⁄8 6 ⁄4 – 7 ⁄4 10 ⁄4 11 ⁄2 14 ⁄2 17 ⁄8 233⁄4
1600-F C 11
3 ⁄32 11
3 ⁄32 27
3 ⁄32 27
3 ⁄32 – 11
4 ⁄32 3
7 ⁄4 3
8 ⁄4 3
9 ⁄4 3
12 ⁄4 151⁄8
D 5 6 7 71⁄2 – 9 10 11 131 ⁄ 2 16 19
1 1 1
Wt. 5 ⁄2 8 ⁄4 10 13 – 19 ⁄2 41 53 87 129 260

Threaded A 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 10 12


Type B 5
3 ⁄8 1
4 ⁄2 3
5 ⁄8 1
6 ⁄4 – 1
7 ⁄4 1
10 ⁄4 1
11 ⁄2 1
14 ⁄2 1
17 ⁄8 233⁄4
1600-T 11 11 27 27 11 3 3 3 3
C 3 ⁄32 3 ⁄32 3 ⁄32 3 ⁄32 – 4 ⁄32 7 ⁄4 8 ⁄4 9 ⁄4 12 ⁄4 151⁄8
Wt. 21⁄2 31⁄4 41⁄4 5 – 61⁄2 251⁄2 35 62 88 195

Weld A 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 10 12


Type B 11
4 ⁄16 11
5 ⁄32 1
6 ⁄4 1
7 ⁄8 – 7
7 ⁄8 1
10 ⁄8 3
11 ⁄8 1
14 ⁄2 17 24
1660-W
C 43⁄4 43⁄4 53⁄16 51⁄4 – 53⁄4 87⁄8 101⁄4 1113⁄16 145⁄8 173⁄8
Wt. 5 7 81⁄2 11 – 16 38 55 85 120 248

Flanged A 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 10 12


11 11 1 1 7 1 3 1
Type B 4 ⁄16 5 ⁄32 6 ⁄4 7 ⁄8 – 7 ⁄8 10 ⁄8 11 ⁄8 14 ⁄2 17 24
1660-F C 3
4 ⁄4 3
4 ⁄4 3
5 ⁄16 1
5 ⁄4 – 3
5 ⁄4 7
8 ⁄8 1 13
10 ⁄4 11 ⁄16 14 ⁄8 5
173⁄8
1 1
D 5 6 7 7 ⁄2 – 9 10 11 13 ⁄2 16 19
1
Wt. 8 12 15 ⁄2 19 – 29 52 74 117 167 313

Threaded A 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 10 12


Type B 11
4 ⁄16 11
5 ⁄32 1
6 ⁄4 1
7 ⁄8 – 7
7 ⁄8 1
10 ⁄8 3
11 ⁄8 1
14 ⁄2 17 24
1660-T 3 3 3 1 3 7 1 13 5
C 4 ⁄4 4 ⁄4 5 ⁄16 5 ⁄4 – 5 ⁄4 8 ⁄8 10 ⁄4 11 ⁄16 14 ⁄8 173⁄8
1
Wt. 5 7 8 ⁄2 11 – 16 38 55 85 120 248

Corporate Office Southern Regional Office


570 Montroyal Road, Rural Hall, NC 27045 6161 Rangeline Rd., Suite A, Theodore, AL 36582
Telephone 336/ 969-6909 Telephone 251/ 443-6552
FAX 336/ 969-6375 FAX 251/ 443-5706
WATS 800/ 562-7024 WATS 800/ 422-0453
Homepage http://www.wagerusa.com Canada 800/ 655-5585 E-mail info@wagerusa.com
365 5/1/06 7:36 PM Page 355

371-06

FLOWSERVE EDWARD VALVES


STOP VALVES–Class 900–2220 PSI @ 100°F (153 BAR @ 38°C)
Standard Features Pressure Class 900 (PN 150)
• Bodies and bonnets are cast steel FIG. NO.
(WCB, WC6, WC9, CF8M or CF8C). TYPE ENDS BONNET NPS (DN)
STD CL SPL CL
• Bolted or pressure-seal bonnet, OS&Y. 1911 — Equiwedge Gate Flanged Pressure-Seal 2-1/2 (65)
• Integral stellite seats, disk and backseat.
1911Y 14311Y Equiwedge Gate Buttwelding Pressure-Seal thru 28 (700)
• Two-piece body-guided wedge.
• 13% chromium stainless steel stem. Venturi Pattern 8 (200)
1911BY 14311BY Buttwelding Pressure-Seal
• Asbestos free graphitic packing. Equiwedge Gate thru 32 (800)
• Available in standard or venturi pattern. A1911 — Equiwedge Gate Flanged Bolted 2-1/2 (65)
• Yoke bushing thrust bearings. A1911Y — Equiwedge Gate Buttwelding Bolted thru 4 (100)
Figure No. 1911/1911Y, 14311Y, NPS 2-1/2 3 4 6 8 10 12 14 16 18 20 22 24 26 28
A1911/A1911Y DN 65 80 100 150 200 250 300 350 400 450 500 550 600 650 700
12 12 14 20 26 31 36 39 43 48 52 57 61 64 68
A - End to End (Welding)
305 305 356 508 660 787 914 991 1092 1291 1321 1448 1549 1626 1727
16.5 15 18 24 29 33 38 40.5 44.5 48 52 57 61 Available
C - Face to Face (Flanged)
419 381 457 610 737 838 965 1029 1130 1291 1321 1448 1549 Upon Request
21.25 21.25 24.5 33.5 40 46.75 54.5 59 68 73.75 82 89.25 95 102 109
E - Center to Top, (Open)
540 540 622 851 1016 1187 1384 1499 1727 1873 2083 2267 2413 2591 2769
14 14 18 24 24 36 36 36 36 36 48 48 48 60 60
G - Handwheel Diameter
356 356 457 610 610 914 914 914 914 914 1219 1219 1219 1524 1524
95 95 225 530 891 1523 2118 2805 3250 4300 5800 7500 9600 12,000 14,500
Weight, (Welding)
43 43 102 241 405 692 963 1275 1474 1950 2631 3402 4355 5543 6577
22.5 22.5 24
E - Center to Top, (Open) A1911/A1911Y
572 572 610
130 130 185
1911Y Weight, (Welding) A1911Y 59 59 84

NPS 8x6x8 10x8x10 12x10x12 14x12x14 16x14x16 18x16x18 20x18x20 22x20x22 24x20x24 26x22x26 28x24x28 30x26x30 32x28x32
Figure No. 1911BY, 14311BY
DN 200 250 300 350 400 450 500 550 600 650 700 750 800
20 26 31 36 39 43 48 52 52 57 61 64 68
A - End to End
508 660 787 914 991 1092 1219 1321 1321 1448 1549 1626 1727
33.5 40 46.75 54.5 59 68 73.75 82 82 89.25 95 102 109
E - Center to Top, (Open)
851 1016 1187 1384 1499 1727 1873 2083 2083 2267 2413 2591 2769
24 24 36 36 36 36 36 48 48 48 48 60 60
G - Handwheel Diameter
610 610 914 914 914 914 914 1219 1219 1219 1219 1524 1524
530 891 1523 2118 2805 3250 4500 6000 6500 8000 10,000 12,500 15,000
Weight, (Welding)
241 405 692 963 1275 1474 2041 2721 2948 3629 4535 5670 6800
Standard Features Pressure Class 900 (PN 150)
• Bodies and bonnets are cast steel (WCB, WC6, WC9,
CF8M or CF8C). FIG. NO.
TYPE ENDS NPS (DN)
• Pressure-seal Bonnet, OS&Y. STD CL SPL CL
• Globe & angle design. 4016 – Globe Flanged 3 (80)
• Integral stellite seat, disk and backseat. 4016Y 4316Y Globe Buttwelding thru 14 (600)
• Body guided disk piston. 4017 – Angle Flanged 3 (80)
• 13% chromium stainless steel stem. 4017Y 4317Y Angle Buttwelding thru 24 (600)
• Asbestos free graphitic packing.
• Yoke bushing thrust bearings size 5 and larger.
Dimensions - Globe & Angle 4017Y 4017
Figure No. 4016/4016Y,
4017/4017Y, NPS 3 4 5 6 8 10 12 14 16 20 24
4316Y, 4317Y DN 80 100 125 150 200 250 300 350 400 ** 500 600
15 18 22 24 29 33 38 40.5
A - End to End, (Welding) Valve Not Available
381 457 559 610 737 838 965 1029
7.5 9 11 12 14.5 16.5 19 19 26 32.5 39
B - Center to Face, (Welding) **
190 229 279 305 368 419 483 483 660 825 991
15 18 22 24 29 33 38 40.5
C - Face to Face, (Flanged) Valve Not Available
381 457 559 610 737 838 965 1029
7.5 9 11 12 14.5 16.5 19 21.75
D - Center to Face, (Flanged) Available Upon Request
190 229 279 305 368 419 483 552
4016Y 4016 22.5 26.25 30.6 37 46 54.75 64.75 71.25
E - Center to Top, Globe (Open) Valve Not Available
572 667 777 940 1168 1391 1645 1810
F - Center to Top, Angle (Open) 20.4 23.75 28.25 34.25 43.4 49.25 60 60 78.5 95 102
518 603 718 870 1102 1251 1524 1524 1994 ** 2413 2591
16 16 20 20 28 28 36 36 36 72 72
G - Handwheel Diameter* **
406 406 508 508 711 711 914 914 914 1829 1829
* Impactor handwheel is standard on all valves.
838
PISTON CHECK VALVES–Class 800–2000 PSI @ 100°F (138 BAR @ 38°C)
Standard Features
• Bodies and covers are of forged FIG. NO. TYPE ENDS NPS (DN)
steel (A105 or F11). 838 Y-Pattern Threaded 1/4 (5) thru
• Bolted cover. 838Y Y-Pattern Socket Welding 2 (50)
Dimensions - Globe
• Y-Pattern.
• Body-guided hardened stainless NPS 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Figure No. 838/838Y
steel disk. DN 6 10 15 20 25 32 40 50
• Integral stellite seat. 3 3 3 3.6 4.3 5.8 5.8 6.5
A - End to End
• Asbestos free spiral wound 76 76 76 91 109 147 147 165
cover gasket. 2.8 2.8 2.8 3.3 3.8 4.6 4.6 5.1
E - Center to Top
• Stainless steel spring. 71 71 71 84 97 117 117 130

STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK 3485 Evergreen Ave. • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
CHARLESTON Tel: 800-962-9696 • 904-354-3800 SAN DIEGO • LONG BEACH
JACKSONVILLE Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
366 5/1/06 7:37 PM Page 356

372-06

Class 600 FLOWSERVE EDWARD VALVES Class 800


1480 PSI @ 100°F (102 BAR @ 38°C) 2000 PSI @ 100°F (138 BAR @ 38°C)
STOP VALVES

848Y
828 849
Standard Features Standard Features
829 • Bodies and bonnets are of forged steel (A105 or F11).
• Bodies and bonnets are of forged steel (A105).
• Bolted bonnet, OS&Y. • Bolted bonnet, OS&Y.
• Globe & angle design. • Y-Pattern or angle design.
• Body-guided hardened stainless steel disk. • Body-guided hardened stainless steel disk. Pressure Class 800 (PN 130)
• Integral stellite seat. • Integral stellite seat.
FIG. NO. TYPE ENDS NPS (DN)
• Integral backseat. • Integral backseat.
• 13% chromium stainless steel stem. 848 Y-Pattern Threaded
• 13% chromium stainless steel stem. FIG. NO. TYPE ENDS NPS (DN) 1/4 (6)
• Asbestos free graphitic packing. • Asbestos free graphitic packing. 848Y Y-Pattern Socket Welding
828 Globe Flanged 1/2 (15) thru thru
• Asbestos free spiral wound • Asbestos free spiral wound 849 Angle Threaded
bonnet gasket. 2 (50)
bonnet gasket. 829 Angle Flanged 2 (50) 849Y Angle Socket Welding
• Knobbed handwheel. • Knobbed handwheel.

Dimensions - Globe & Angle Bold face numerals are in inches and pounds. Dimensions - Globe & Angle Bold face numerals are in inches and pounds.
NPS 1/2 3/4 1 1-1/4 1-1/2 2 NPS 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Figure No. 828, 829
DN 15 20 25 32 40 50 DN 6 10 15 20 25 32 40 50
6.5 7.5 8.5 9.5 9.5 11.5 3 3 3 3.6 4.3 5.8 5.8 6.5
C - Face to Face, Globe (Flanged) A - End to End, Globe
165 191 216 241 241 292 76 76 76 91 109 147 147 165
3.3 3.8 4.3 4.8 4.8 5.8 1.5 1.5 1.5 1.8 2 2.9 2.9 3.3
D - Center to Face, Angle (Flanged) B - Center to End, Angle
84 97 109 122 122 147 38 38 38 46 51 74 74 84
6.1 6.9 7.7 11.1 11.1 12.1 6 6 6 6.8 7.6 10.9 10.9 12.1
E - Center to Top, Globe (Open) E - Center to Top, Globe (Open)
155 175 196 282 282 307 152 152 152 173 193 277 277 307
5.7 6.4 7.1 10.2 10.2 11.0 5.7 5.7 5.7 6.4 7.1 10.2 10.2 11
F - Center to Top, Angle (Open) F - Center to Top, Angle (Open)
145 163 180 259 259 279 145 145 145 163 180 259 259 279
3.8 4.3 4.8 7.1 7.1 8.5 3.8 3.8 3.8 4.3 4.8 7.1 7.1 8.5
G - Handwheel Diameter G - Handwheel Diameter
97 109 122 180 180 216 97 97 97 109 122 183 180 216
7.5 12 16 27 32 38 4 4 4 5.5 7.5 16 16 23
Weight, Globe Weight, Globe
3.4 5.4 7.2 12.2 14.4 17.1 1.8 1.8 1.8 2.5 3.4 7.2 7.2 10.4
7 11 15 26 31 36 4 4 4 5.5 7 17 17 24
Weight, Angle Weight, Angle
3.2 5 6.8 11.7 14 16.2 1.8 1.8 1.8 2.5 3.2 7.7 7.7 10.8

Series 1500
3600 PSI @ 100°F (248 BAR @ 38°C)

1049
1028 1048Y
Standard Features Standard Features
• Bodies and bonnets are of forged steel (F11). • Bodies and bonnets are of forged steel (A105 or F11).
• Bolted bonnet, OS&Y. 1029 • Bolted bonnet, OS&Y.
• Globe or angle design. • Y-Pattern or angle design.
• Body-guided hardened stainless • Body-guided hardened stainless steel disk.
steel disk. FIG. NO. TYPE ENDS NPS (DN)
• Integral stellite seat.
• Integral stellite seat. 1028 Globe Flanged 1/2 (15) • Integral backseat. FIG. NO. TYPE ENDS NPS (DN)
• Integral backseat. • 13% chromium stainless steel stem. 1048 Y-Pattern Threaded
1029 Angle Flanged thru 2 (50)
• 13% chromium stainless steel stem. 1/4 (6)
• Asbestos free graphitic packing. 1048Y Y-Pattern Socket Welding
• Asbestos free graphitic packing. • Asbestos free spiral wound thru
• Asbestos free spiral wound bonnet gasket. 1049 Angle Threaded
bonnet gasket. 2 (50)
• Knobbed handwheel. 1049Y Angle Socket Welding
• Knobbed handwheel.
Dimensions - Globe & Angle Dimensions - Globe & Angle
NPS 1/2 3/4 1 1-1/4 1-1/2 2 Figure No. 1048/1048Y, NPS 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Figure No. 1028, 1029
DN 15 20 25 32 40 50 1049/1049Y DN 6 10 15 20 25 32 40 50
8.5 9 10 12 12 14.5 3 3 3 3.6 4.3 5.8 5.8 6.5
C - Face to Face, Globe (Flanged) A - End to End, Globe
216 229 254 305 305 368 76 76 76 91 109 147 147 165
4.3 4.5 5 6 6 7.3 1.5 1.5 1.5 1.8 2 2.9 2.9 3.3
D - Center to Face, Angle (Flanged) B - Center to End, Angle
109 114 127 152 152 185 38 38 38 46 51 74 74 84
7 7.7 7.7 11.1 11.1 12 6.1 6.1 6.1 6.9 7.6 10.9 10.9 12.1
E - Center to Top, Globe (Open) E - Center to Top, Globe (Open)
178 196 196 282 282 305 155 155 155 175 197 277 277 307
6.6 7.1 7.1 10.2 10.2 11.1 5.8 5.8 5.8 6.6 7.1 10.2 10.2 11
F - Center to Top, Angle (Open) F - Center to Top, Angle (Open)
168 180 180 259 259 282 147 147 147 168 183 259 259 279
4.3 4.8 4.8 7.1 7.1 8.5 3.8 3.8 3.8 4.3 4.8 7.1 7.1 8.5
G - Handwheel Diameter G - Handwheel Diameter
109 122 122 180 180 216 97 97 97 109 122 183 183 216
15 19 26 38 47 77 4 4 4 5.5 8 17 17 24
Weight, Globe Weight, Globe
6.8 8.6 11.7 17.1 21.2 34.7 1.8 1.8 1.8 2.5 3.6 7.7 7.7 10.8
15 20 26 41 49 80 4 4 4 5.5 7.5 17 17 25
Weight, Angle Weight, Angle
6.8 9 11.7 18.5 22.1 36 1.8 1.8 1.8 2.5 3.4 7.7 7.7 11.3

MARINE FITTINGS
& FLANGES W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics 3485 Evergreen Ave. • Jacksonville, FL 32206 - Hose Valves
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
367 5/1/06 7:39 PM Page 357

373-06

FLOWSERVE EDWARD VALVES


Class 2680
6700 PSI @ 100°F (462 BAR @ 38°C) STOP VALVES
Pressure Class 2680 (PN 460)
Class 1690 FIG. NO.
TYPE ENDS NPS (DN)
WELDED UNWELD.
4200 PSI @ 100°F (290 BAR @ 38°C)
66120 66220 Y-Pattern Threaded* 1/2 (15) thru 1 (25)
66124 66224 Y-Pattern Socket Welding 1/2 (15) thru 2-1/2 (65)
66128 66228 Y-Pattern Buttwelding 1/2 (15) thru 4 (100)
* Threaded end valves are limited to Presure Class 2500

Pressure Class 1690 (PN 290)


FIG. NO.
TYPE ENDS NPS (DN)
WELDED UNWELD.
36120 36220 Y-Pattern Threaded 1/2 (15) thru 1 (25)
36124 36224 Y-Pattern Socket Welding 1/2 (15) thru 2-1/2 (65)
36128 36228 Y-Pattern Buttwelding 1/2 (15) thru 4 (100)

Standard Features Dimensions - Globe


• Available Body Materials. NPS 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
- A105 carbon steel. DN 15 20 25 32 40 50 65 80 100
- F22 alloy steel. 6.0 6.0 6.0 6.7 6.7 10.7 12.8 12.8 12.8
A - End to End
152 152 152 170 170 272 325 325 325
- F316, F347 stainless steel.
2.30 2.30 2.30 3.20 3.20 4.00 4.80 4.80 4.80
• Unwelded (graphitic seal) or welded bonnet. AA - End Hub Diameter
58 58 58 81 81 92 122 122 122
• OS & Y. 7.5 7.5 7.5 11.0 9.8 11.6 11.2 11.2 11.2
• Y-Pattern. AB - Handwheel Clearance, (Open)
191 191 191 279 249 296 284 284 284
• Body-guided investment cast stellite disk. B - Center to End
4.0 4.0 4.0 4.8 4.8 7.1 8.8 8.8 8.8
• Integral stellite seat. 102 102 102 122 122 180 224 224 224
• Integral backseat. 11.5 11.5 11.5 15.9 14.6 18.6 20.0 20.0 20.0
E - Center to Top, (Open)
292 292 292 404 371 472 508 508 508
• Asbestos free graphitic packing.
8.5 8.5 8.5 14.3* 11.0* 14.3* 16.0** 16.0** 16.0**
G - Handwheel/Handle Diameter
216 216 216 363* 279* 363* 406** 406** 406**
* Impactor Handle ** Impactor Handwheel

BLOW OFF VALVES


Figure 1643
Class 400 and 600
ANGLE
BLOW-OFF VALVE

Figure 1641
STRAIGHTWAY
BLOW-OFF VALVE

1641/1643
Dimensions - Globe & Angle
NPS 1-1/2 2 2-1/2 Standard Features Pressure Class 400 (PN 68) & 600 (PN 110)
Figure No. 1641/1641Y, 1643/1643Y
DN 40 50 65 • Size 1-1/2 and 2 bodies FIG. NO. TYPE ENDS NPS (DN)
6.8 8 11.5 & bonnets are forged 1641 Globe Flanged 1-1/2 (40) & 2-1/2 (65)
A - End to End, Globe (Welding)
173 203 292 steel (A105). 1641Y Globe Socket Welding 1-1/2 (40) & 2 (50)
3.4 3.8 5.8
B - Center to End, Angle (Welding) • Size 2-1/2 bodies and bonnets 1641Y Globe Buttwelding 2-1/2 (65)
86 97 147
are cast steel (WCB). 1643 Angle Flanged 1-1/2 (40) & 2-1/2 (65)
12.4 13.1 14.4
C - End to End, Globe (Flanged) 1643Y Angle Socket Welding 1-1/2 (40) & 2 (50)
315 333 366 • Bolted bonnet, OS&Y.
4.8 5.8 6.5 1643Y Angle Buttwelding 2-1/2 (65)
D - Center to End, Angle (Flanged)
122 147 165
• Straightway and angle design.
13.4 15.3 15.9 • Size 1-1/2 and 2 have
E - Center to Top, Globe (Open)
340 389 404 hardened stainless steel disk.
12.4 13.9 14.3 • Size 2-1/2 has stellite
F - Center to Top, Angle (Open)
315 353 363
faced disk.
11 11 11
G - Handwheel/ Handle Diameter
279 279 279 • Integral stellite seat.
44 62 95 • Integral backseat. Pressure Ratings (B16.34 Standard Class)
Weight, Globe (Flanged)
19.8 27.9 43.1
27 38 76 • 13% chromium stainless Flanged or Welding Ends Class 600 Primary Service
Weight, Globe (Welding) steel stem. Maximum Boiler Drum Pressure* 935 psi (67 bar)
12.2 17.1 34.2
41 55 85 • Asbestos free spiral wound Maximum Non-Shock 1480 psi at 100°F (102 bar)
Weight, Angle (Flanged)
18.5 24.8 38.5 bonnet gasket. * This adjusted pressure rating represents the maximum allowable working
25 36 66 pressure for this Class valve in boiler feed and blow-off line service.
Weight, Angle (Welding) • Impactor handle.
11.3 16.2 29.7

STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK 3485 Evergreen Ave. • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
CHARLESTON Tel: 800-962-9696 • 904-354-3800 SAN DIEGO • LONG BEACH
JACKSONVILLE Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
368 5/1/06 7:40 PM Page 360

374-06

JIS HULL CAST STEEL • Inside Screw Part Material JIS Spec.
Non-Rising Stem
GATE VALVES • Flanged, Bolted Bonnet
Body
Disc
Cast Steel
Cast Steel
SC 46
SC 46
Body Seat Ring Bronze BC 6
• Fluid Condition: Disc Seat Ring Bronze BC 6
Sea Water Disc Nut Bronze BC 6
• Max. Working Pressure: Stem Brass C 3771 BD
2 kgf/cm2 Bonnet Cast Steel SC 46
JISF 7360 Handwheel FC 20 FC 20
• Test Pressure (kgf/cm2):
Stud. Nut Steel —
– Watertight Inspection
for Valve Seat: 2.5
– Hydraulic Inspection Fig. No. Trim
for Body: 5 MFC-101 Bronze Gage
MFC-102 SUS403 Gage
MFG-103 SUS304 Gage

Valve Size 450 500 550 600 650 700 750 800
Face to Face (L) 450 500 550 600 650 700 750 800
Height (H) 1300 1420 1550 1650 1750 1850 1950 2050
Flange Diam. (D) 620 675 745 795 845 905 970 1020
Handwheel Diam. (D1) 450 500 500 500 560 560 630 630
Dimensions in mm

The products listed above and below this message are not available from the same manufacturing source.

Type D
Flanged connection only ANGLE CARGO VALVES
Ductile Iron
Bronze Trim

PIPE NO. OF WEIGHT


SIZE TURNS A B C D E M N P R (APPROX.)
4 13 6 13-7/8 11-5/8 9-1/4 10-1/2 4 9 15/16 7-1/2 70
6 14 8-1/4 18-13/16 15-15/16 13-3/8 14-1/4 6 11 1 9-1/2 182
8 21 10-1/2 21-7/16 17-3/16 17-11/16 17-11/64 8 13-1/2 1-1/8 11-3/4 320
10 25 13-1/4 25-23/32 20-21/32 22-1/8 22-1/4 10 16 1-3/16 14-1/4 540
12 30 14-1/4 28 22 25-5/16 23-3/4 12 19 1-1/4 17 850 Dimensions are in inches

MARINE FITTINGS
& FLANGES W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics 3485 Evergreen Ave. • Jacksonville, FL 32206 - Hose Valves
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
0365-04 5/1/06 7:41 PM Page 1

375-06

BRITISH STANDARD PIPE (BSP) THREAD


NEEDLE VALVES – STRAIGHT & ANGLE TYPE
Brass & Stainless Steel
Brass Needle Valves mounted with Nitril O-ring packaging. Designed for use with copper
tubing at working pressure of 100 bar. Maximum temperature 80°C. Need no retightening.
BRASS NEEDLE
VALVES BRASS ANGLE
NEEDLE VALVES
Straight valve with
female BSP thread Angle valve with
at both ends. cutting & tube nut
at outlet and male
Part Female
No. Threads BSP thread.
70 801 1/8 BSP
70 802 1/4 BSP
Part Tube Male
70 803 3/8 BSP No. Size Thread
70 804 1/2 BSP 71 119 6mm 1/4 BSP
71 120 6mm 3/8 BSP
BRASS NEEDLE 71 121 8mm 1/4 BSP
VALVES 71 122 8mm 3/8 BSP
Straight valve with 71 123 10mm 1/4 BSP
cutting ring & tube 71 124 10mm 3/8 BSP
nut at both ends. 71 125 10mm 1/2 BSP
Part Tube 71 151 12mm 3/8 BSP
No. Size
71 152 12mm 1/2 BSP
70 400 6mm
70 401 8mm
70 402 10mm
70 403 12mm
STAINLESS STEEL
BRASS NEEDLE NEEDLE VALVES
VALVES 316 Stainless Steel
Straight valve with straight valve with
male BSP thread female BSP thread
at both ends. at both ends.
Part Male Part Female
No. Threads No. Threads
71 115 1/8 BSP 71 111 1/8 BSP
71 116 1/4 BSP 71 112 1/4 BSP
71 117 3/8 BSP 71 113 3/8 BSP
71 118 1/2 BSP metric marine & industrial 71 114 1/2 BSP

Also Stocking 28 Paul Dr., San Rafael, CA 94903


BSP
MetricTHREADED
Marine Phone: 415-492-9202
BRASS &
& Industrial Fax: 415-492-9206
STAINLESS STEEL E-mail: info@metricmarine.com
BALL VALVES Web: www.metricmarine.com
Your Source for European Specialty Tools, Tubing & Fittings
0364-03 5/1/06 7:42 PM Page 364

376-06

QUICK-CLOSING GATE VALVE


Model 132G

NOM BORE A B C ITEM NAME MATERIAL


in. mm in. mm in. mm in. mm 1 Body ASTM A-126 Class B
3/4 19.1 7-1/2 190 10-3/8 264 9 229 2 Steam ASTM B-16 Alloy
1 25.4 8-1/2 216 11-3/4 298 10-3/8 264 3 Seat Rings ASTM B-584 Alloy
1-1/4 31.8 6-1/2 165 17-1/8 435 15-1/4 387
1-1/2 38.1 6-1/2 165 17-3/8 435 15-1/4 387 Cylinder Operated: Hydraulic, pneumatic
2 50.8 7 178 19-3/8 492 16-3/4 425 or manual.
2-1/2 63.5 7-1/2 190 21-5/8 549 18-1/2 470 Available: Cast iron; bronze; cast steel
3 76.2 8 203 24 610 20-3/8 517 (ASA standard)
3-1/2 88.9 8-1/2 229 29-3/8 750 24-3/4 629
4 101.6 9 229 29-3/8 750 24-3/4 629 Quickclose Gate Valves are suitable for oil
5 127 10 254 32-5/8 828 27 685 and water for a maximum working pressure
2
6 152.4 10-1/2 267 36-1/8 920 29-1/2 749 = 150 lbf/in and maximum temperature = 90
8 203.2 11-1/2 292 50-1/8 1273 41-1/2 1054 grd. celsius.
10 254 13 330 58 1473 47-3/8 1213
12 304.8 14 355 72-1/8 1830 59-1/2 1510

SELF-CLOSING SOUNDING COCKS


BUNKER DRAIN VALVE
Model 178
(Bronze Body – ASTM B62)
Model 170
DN - d D L A H
1” 1/4 Gas 56 x 4M 125 90 160
1” 1/2 Gas 56 x 4M 125 90 160
2” Gas 70 x 4M 150 100 200

Available: BSP and NPT Threads

ITEM NAME MATERIAL


1 Body ASTM B62
2 Tap ASTM B62
3 Cover ASTM B62
4 Plug ASTM B62
5 Counter Weight ASTM A48 - C25
6 Cap ASTM B62

BORE A B C D
in. mm in. mm in. mm in. mm in. mm
1/2 12.7 3-3/4 95.3 1/4 6.4 3 76.2 2-5/8 66.7
3/4 19.1 4 101.6 1/4 6.4 3 76.2 2-5/8 66.7
1 25.4 4-1/2 114.3 5/16 7.9 3 76.2 2-3/4 69.9
1-1/4 31.8 4-3/4 120.7 5/16 7.9 3-3/4 95.3 4 101.6
1-1/2 38.1 5-1/4 133.4 3/8 9.5 3-3/4 95.3 4 101.6

MONTREAL VALVE LTD WE STOCK ALL


9130, Avenue du Parc, Montreal, PQ, Canada H2N 1Z2 METRIC and MULTISTANDARD
ISO 9002 info@montrealvalve.com • www.montrealvalve.com
Toll Free: (800) 361-9037 • Tel: (514) 389-7881 • Fax: (514) 389-0301
Quick-closing globe and angle valves also available upon request
CALL US FOR INQUIRY
Special Valves Custom Made
to Your Specifications
0365-03 5/1/06 7:43 PM Page 365

377-06

BRONZE FLANGED BODY DIAPHRAGM VALVES 150 PSI BRONZE


Model 100 DIAPHRAGM VALVE – Model 200
(Dimensions - Inches) Straightway Flanged – Bolted Bonnet
Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
A 4 5-1/2 5-1/2 6 6-1/2 7-1/2 8-1/2 10
For larger sizes, please specify exact
dimensions required.

150 PSI DIAPHRAGM VALVE


Angle – Flanged
Model 100A
(Dimensions - Inches)
Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
D 2-5/8 2-5/8 2-3/4 3-1/8 3-1/4 3-3/4 4-1/4 5
E 2-7/8 2-7/8 3-1/2 3-7/8 4-1/4 5-9/64 5-7/8 7
For larger sizes, please specify exact
dimensions required.

Item Name Material Specification Item Name Material Specification


1 Handwheel As Required 1 Body Bronze ASTM B61
2 Stud Ph. Bronze ASTM B139
2 Bonnet Bronze ASTM B61
3 Diaphragm Neoprene Grade TV
3 Stud Ph. Bronze ASTM B1 39 4 Spindle Ph. Bronze ASTM B139
4 Diaphragm Neoprene Grade TV 5 Bonnet Bronze ASTM B61
5 Body Bronze ASTM B61 6 Handwheel Bronze ASTM B61
7 Travel Stop Ph. Bronze ASTM B139

PN 16 NODULAR CAST IRON GLOBE VALVE


Bolted Bonnet – Bellows Seal No. Part Specification
Model 250 1 Handwheel Steel Alloy
2 Stem Stainless Steel AISI 410
Available options: Cast Steel Body & Bonnet, 3 Bonnet Nodular Cast Iron ASTM A536
PN 25/40, Hydraulic or Pneumatic Actuator 4 Bellow Stainless Steel
5 Disc Stainless Steel AISI 410
6 Seat Ring Stainless Steel AISI 410
7 Body Nodular Cast Iron ASTM A536

Nominal
DIMENSIONS (mm)
Size
(D) L B C A
20 150 167 125 105
25 160 177 125 115
32 180 186 125 140
40 200 204 125 150
50 230 247 200 165
65 290 380 200 185
80 310 454 200 200
100 350 511 200 220
125 400 555 400 250
150 480 626 400 285

MONTREAL VALVE LTD WE STOCK ALL


METRIC and MULTISTANDARD
CALL US FOR INQUIRY
9130, Avenue du Parc, Montreal, PQ, Canada H2N 1Z2
info@montrealvalve.com • www.montrealvalve.com
Toll Free: (800) 361-9037 • Tel: (514) 389-7881 • Fax: (514) 389-0301
ISO 9002 Special Valves Custom Made
to Your Specifications
See Our Storm Valves & Strainers in the Advertising Section!
0368-04 5/1/06 7:44 PM Page 366

378-06

JIS VALVES
BRONZE GLOBE VALVES BRONZE ANGLE VALVES
F7301-5 kgf/cm2 F7303-16 kgf/cm2 F7302-5 kgf/cm2 F7304-16 kgf/cm2
11
9
10
5
15
14
7
16
6
17
2
18 4
13
1
3

Nominal No. Item Material Nominal


Press. Dia. d L D C N h t H D1 1 Body BC6 Press. Dia. d L1 D C N h t H D1
15 15 100 80 60 4 12 9 130 80 2 Bonnet 15 15 55 80 60 4 12 9 120 80
20 20 110 85 65 4 12 10 140 100 3 Disc BC6 20 20 60 85 65 4 12 10 130 100
5kgf 25 25 120 95 75 4 12 10 160 125 4 Disc Nut or 5kgf 25 25 65 95 75 4 12 10 145 125
/cm2 32 32 140 115 90 4 15 12 170 125 5 Gland C3771BD /cm2 32 32 80 115 90 4 15 12 150 125
(F7301) 40 40 160 120 95 4 15 12 190 140 6 Gland Nut (F7302) 40 40 85 120 95 4 15 12 165 140
50 50 210 130 105 4 15 14 235 140 7 Stem C3771BD 50 50 100 130 105 4 15 14 200 140
65 65 250 155 130 4 15 14 260 160 8 Set Screw C2700W 65 65 115 155 130 4 15 14 220 160
15 15 110 95 70 4 15 12 130 80 9 Hand Wheel FC20 15 15 70 95 70 4 15 12 120 80
16kgf 20 20 120 100 75 4 15 14 140 100 10 Nut C3771BD 16kgf 20 20 75 100 75 4 15 14 130 100
/cm2 25 25 130 125 90 4 19 14 160 125 11 Split Pin C2600W /cm2 25 25 85 125 90 4 19 14 145 125
(F7303) 32 32 160 135 100 4 19 16 170 125 12 Lock Plate C2600P (F7304) 32 32 95 135 100 4 19 16 150 125
40 40 180 140 105 4 19 16 190 140 13 Lock Washer C2600P 40 40 100 140 105 4 19 16 165 140
Unit: mm 14 Packing JISF7102 Unit: mm
The above dimensions are the same for: 15 Name Plate C2801P The above dimensions are the same for:
Bronze Screw-Down Globe Check Valves 16 Stud Bolt C3771BD Bronze Screw-Down Angle Check Valves
17 Nut C3771BD
JIS F7351-5 kgf/cm2 and JIS F7409-16 kgf/cm2 JIS F7352-5 kgf/cm2 and JIS F7410-16 kgf/cm2
18 Gasket JISF7102
Bronze Globe Union Bonnet Valves Bronze Union Bonnet Angle Valves
JIS F7346-5 kgf/cm2 and JIS F7348-16 kgf/cm2 JIS F7347-5 kgf/cm2 and JIS F7349-16 kgf/cm2

BRONZE GATE VALVES – Rising Stem


F7367-5 kgf/cm2 F7368-10 kgf/cm2
No. Item Material Nominal
1 Body BC6 Press. Dia. d L D C N h t H e D2 a

2 Bonnet BC6 15 15 90 80 60 4 12 9 175 21.5 80 3.5


3 Bonnet Nut BC6 5kgf 20 20 100 85 65 4 12 10 200 27 80 4
4 Disc BC6 cm2 25 25 110 95 75 4 12 10 220 32.5 100 4.5
5 Packing Gland BC6 or (F7367) 32 32 130 115 90 4 15 12 250 39.5 100 5
6 Gland Nut C3771BD 40 40 140 120 95 4 15 12 290 48 125 6
7 Stem C3771BD 15 15 100 95 70 4 15 12 175 21.5 80 3.5
8 Hand Wheel FC20 10kgf 20 20 110 100 75 4 15 14 200 27 80 4
9 Nut C3771BD cm2 25 25 120 125 90 4 19 14 220 32.5 100 4.5
10 Split Pin C2600W (F7368) 32 32 140 135 100 4 19 16 250 39.5 100 5
11 Packing JISF7102 40 40 150 140 105 4 19 16 290 48 125 6
12 Gasket JISF7102 Unit: mm
13 Name Plate C2801P

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0369-04 5/1/06 7:45 PM Page 1

379-06

JIS VALVES
Screwed Type BRONZE HOSE GLOBE & ANGLE VALVES
F7334 – 5 kgf/cm2 & 10 kgf/cm2
7 11
18
10
6 9
5
2
12 14
15 No. Item Material No. Item Material No. Item Material
8
1 4 1 Body BC6 7 Stem C3771BD 13 Lock Washer C2600P
13
3
2 Bonnet 8 Set Screw C2770W 14 Packing JIS F7102
3 Disc BC6 9 Hand Wheel FC20 15 Gasket JIS F7102
16 4 Disc Nut or 10 Nut C3771BD 16 Cap BC6
17 5 Gland C3771BD 11 Split Pin C2600W 17 Chain C2600W
6 Gland Nut 12 Lock Plate C2600P 18 Name Plate C2600P

Globe
Nominal
11 18
d d1 L D C N h t H l D2 d3 a L1 L2 d8
Dia. Press.
10 9
15 5 15 20 68 80 60 4 12 9 129 8 80 M42 x 2 3 55 55 52
7
5 15 10 15 20 73 95 70 4 15 12 129 8 80 M42 x 2 4 70 60 52
14 6
2 25 5 25 30 78 95 75 4 12 10 161 12 125 M42 x 2 4 60 65 52
12
8 15 25 10 25 30 83 125 90 4 19 14 161 12 125 M42 x 2 4 65 70 52
1 13
16 Unit: mm
Angle
Nominal
17 d d1 L D C N h t H l D2 d3 a L1 L2 d8
Dia. Press.
15 5 15 20 73 80 60 4 12 9 129 8 80 M42 x 2 3 50 60 52
15 10 15 20 73 95 70 4 15 12 129 8 80 M42 x 2 4 55 60 52
25 5 25 30 78 95 75 4 12 10 161 12 125 M42 x 2 4 60 65 52
25 10 25 30 83 125 90 4 19 14 161 12 125 M42 x 2 4 65 70 52
Unit: mm

Nakajima Quick Coupling


11 24
10 9 No. Item Material No. Item Material No. Item Material
5
14
1 Body BC6 9 Hand Wheel FC20 17 Cap BC6
7
2 2 Bonnet 10 Nut C3771BD 18 Coupling Ring BC6
6
15
12
20 23
3 Disc BC6 11 Split Pin C2600W 19 Set Ring BC6
4
13
8
4 Disc Nut or 12 Lock Plate C2600P 20 Set Screw C2700W
3 19
17
5 Gland C3771BD 13 Lock Washer C2600P 21 Chain C2700W
1
6 Giand Nut 14 Packing JIS F7102 22 Gasket Rubber
21
7 Stem C3771BD 15 Gasket JIS F7102 23 Gasket JIS F7102
8 Set Screw C2770W 16 Base BC6 24 Name Plate C2600P
16
22 18
Connection

10
24
11 Globe
9
Nominal
7 5
6
d d1 L D C N h t H l D2 d3 a L1 L2
14
2
Dia. Press.
12
8 15
20
40 5 40 45 128.5 120 95 4 15 12 193 17.5 140 M52 x 2 5 80 80
19 40 10 40 45 133.5 140 105 4 19 16 193 17.5 140 M52 x 2 6 90 85
4 23

13
Unit: mm
17
3
22
Angle
1 16
21 Nominal
18 d d1 L D C N h t H l D2 d3 a L1 L2
Dia. Press.
40 5 40 45 123.5 120 95 4 15 12 193 17.5 140 M52 x 2 5 85 75
40 10 40 45 123.5 140 105 4 19 16 193 17.5 140 M52 x 2 6 100 75
Unit: mm

EAST COAST -- Somerset, NJ world wide metric GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
0370-04 5/1/06 7:46 PM Page 1

380-06

JIS VALVES
BRONZE HOSE GLOBE &
ANGLE VALVES Nakajima Quick Coupling
F7334 – 5 kgf/cm2 & 10 kgf/cm2 No. Item Material No. Item Material No. Item Material
1 Body BC6 10 Nut C3771BD 19 Coupling Ring BC6
10 13
25 2 Bonnet BC6 11 Stud Bolt C3771BD 20 Set Ring BC6
3
2
3 Hand Wheel FC20 12 Stud Bolt C3771BD 21 Set Screw C2700W
8
6
7 11
4 Disc BC6 13 Split Pin C2600W 22 Chain C2700W
15 12
1 9
5 Disc Nut C3771BD 14 Lock Plate C2600P 23 Gasket Rubber
16
5 21 23 24
6 Gland BC6 15 Packing JIS F7102 24 Gasket JIS F7102
14
18 7 Stem C3771BD 16 Gasket JIS F7102 25 Name Plate C2600P
8 Nut C3771BD 17 Base BC6
22 Connection
19
17 9 Nut C3771BD 18 Cap BC6
4 24

Globe
13 Nominal
25 10
d d’ d1 L D C N h t H l D2 d3 a L1 L2
2 3 Dia. Press.
7

6 11 50 5 50 50 55 159.8 130 105 4 15 14 256 20 160 M64 x 2 6 105 105


8
15 12 50 10 50 50 55 164.8 155 120 4 19 16 271 20 160 M64 x 2 7 110 110
9 21
16
24
65 10 65 65 75 199.8 175 140 4 19 18 298 26 200 M80 x 2 8 135 140
23
5 Unit: mm
14 18
4 22 Angle
1 20
19 Nominal
d d’ d1 L D C N h t H l D2 d3 a L1 L2
Dia. Press.
17
50 5 50 50 55 154.8 130 105 4 15 14 256 20 160 M64 x 2 6 100 100
50 10 50 50 55 159.8 155 120 4 19 16 271 20 160 M64 x 2 7 120 105
65 10 65 65 75 179.8 175 140 4 19 18 298 26 200 M80 x 2 8 130 120
Unit: mm
BRONZE SWING CHECK VALVES
F7371 – 5 kgf/cm2

Nominal
d L D C N h t H a D1 S
Dia.
25 25 110 95 75 4 12 10 69 4 58 41
32 32 130 115 90 4 15 12 79 4 66 41
40 40 140 120 95 4 15 12 93 5 75 46
Unit: mm

No. Item Material


BRONZE LIFT CHECK VALVES 1 Body BC6
F7356 – 5 kgf/cm2 2 Bonnet BC6 or C3771BD
3 Disc BC6 or C3771BD

Nominal
d d1 L D C N h t H l a
Dia.
25 25 30 120 95 75 4 12 10 77 10 4
32 32 37 140 115 90 4 15 12 81 11 4
40 40 45 160 120 95 4 15 12 91 13 5
Unit: mm

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0371-04 5/1/06 8:14 PM Page 1

381-06

JIS VALVES
Type U Type S
F7387 BRONZE COCKS – 16 kgf/cm2

Type S
Nom. Pipe out. dia. d d3 K H B1 B2
l1 l2 l3 l4
dia. Copper Steel
6 8 & 10 10.5 6 28 28 37 M20 x 1.5 12 65 55 22 30
10 15 17.3 10 40 35 52 M24 x 2 16 73 65 27 41
15 20 21.7 15 45 45 58 M30 x 2 22 92 75 36 46
20 25 27.2 20 50 50 65 M36 x 2 24 104 85 41 50
Unit: mm
Type U
Nom. Pipe out. dia. d L L1 H a d4 H3 B2 B3
l4
dia. Copper Steel
6 8 & 10 10.5 6 56 74 65 55 3 M24 x 2 36 30 32
10 15 17.3 10 80 104 73 65 4 M30 x 2 44 41 36
Unit: mm

F7381 BRONZE FLANGED COCKS – 5 kgf/cm2

Nominal
dia.
d L L1 D C N h t H l a S

2 Way Cock 25 25 130 65 95 75 4 12 10 105 160 5 17


32 32 160 80 115 90 4 15 12 125 180 5 22
40 40 170 85 120 95 4 15 12 135 190 6 24
50 50 190 95 130 105 4 15 14 163 200 6 27
65 65 220 110 155 130 4 15 14 201 250 7 36
Unit: mm

3 Way Cock

F7388 BRONZE GLOBE VALVE – 20 kgf/cm2


Screwed Ends – Union Bonnet

Type S
Nom. Pipe out. dia. d d’ d3 K H D2 B1 B2 S3
l1 l2 l3
dia. Copper Steel
Type S 6 8 & 10 10.5 6 8 32 32 41 M20 x 1.5 12 100 63 22 30 27
10 15 17.3 10 10 36 35 48 M24 x 2 16 115 80 27 41 30
Unit: mm
Type U
Nom. Pipe out. dia. d d1 L L1 H D2 a B2 S2 S3
l
dia. Copper Steel
6 8 & 10 10.5 6 8 64 82 100 5.5 63 3 30 36 27
10 15 17.3 10 10 72 96 115 7.5 80 3 41 41 30
Type U
Unit: mm

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0372-04 5/1/06 8:14 PM Page 370

382-06

CAST IRON AND CAST STEEL


JIS VALVES
GLOBE VALVES with Bronze Trim JIS F7305 – 5 kgf/cm2 Cast Iron Globe Valves
JIS F7353 – 5 kgf/cm2 Cast Iron Screw-Down Check Globe Valves
JIS F7311 – 5 kgf/cm2 Cast Steel Globe Valves
JIS F7311 – 5 kgf/cm2 Cast Steel Screw-Down Check Globe Valves
Size d d1 L D C No. h Bolt t H F7305 F7353 D2 a d6 d7 (kg)
50 50 58 210 130 105 4 15 M12 16 270 17 15 160 8 TW20 32 14.7
65 65 73 250 155 130 4 15 M12 18 300 22 17 180 9 TW22 36 21.3
80 80 88 280 180 145 4 19 M16 18 310 27 20 180 9 TW22 36 27.7
100 100 111 340 200 165 8 19 M16 20 360 33 25 224 10 TW26 42 40.8
125 125 138 410 235 200 8 19 M16 20 390 42 31 250 11 TW28 44 57.6
150 150 163 480 265 230 8 19 M16 22 445 50 37 280 12 TW32 50 80.3
200 200 213 570 320 280 8 23 M20 24 530 67 46 315 15 TW36 56 139
250 250 265 740 385 345 12 23 M20 26 650 84 63 355 16 TW42 66 216
300 300 315 840 430 390 12 23 M20 28 740 100 75 400 17 TW46 72 346
350 335 355 940 480 435 12 25 M22 30 840 112 84 500 18 TW52 80 418
400 380 405 1050 540 495 16 25 M22 30 940 127 95 630 20 TW58 88 600
Unit: mm

CAST IRON AND CAST STEEL


ANGLE VALVES with Bronze Trim JIS F7306 – 5 kgf/cm2 Cast Iron Angle Valves
JIS F7354 – 5 kgf/cm2 Cast Iron Screw-Down Check Angle Valves
JIS F7312 – 5 kgf/cm2 Cast Steel Angle Valves
JIS F7312 – 5 kgf/cm2 Cast Steel Screw-Down Check Angle Valves
Size d d1 L1 D C No. h Bolt t H F7306 F7354 D2 a d6 d7 (kg)
50 50 58 100 130 105 4 15 M12 16 240 17 15 160 8 TW20 32 12.9
65 65 73 115 155 130 4 15 M12 18 255 22 17 180 9 TW22 36 18.2
80 80 88 130 180 145 4 19 M16 18 265 27 20 180 9 TW22 36 23.4
100 100 111 150 200 165 8 19 M16 20 310 33 25 224 10 TW26 42 33.7
125 125 138 170 235 200 8 19 M16 20 330 42 31 250 11 TW28 44 46.2
150 150 163 190 265 230 8 19 M16 22 380 50 37 280 12 TW32 50 63.4
200 200 213 220 320 280 8 23 M20 24 450 67 46 315 15 TW36 55 105
250 250 265 275 385 345 12 23 M20 26 540 84 63 355 16 TW42 66 166
300 300 315 310 430 390 12 23 M20 28 610 100 75 400 17 TW46 72 243
350 335 355 360 480 435 12 25 M22 30 690 112 84 500 18 TW52 80 327
400 380 405 395 540 495 16 25 M22 30 770 127 95 630 20 TW58 88 459
Unit: mm

CAST IRON AND CAST STEEL


JIS F7363 – 5 kgf/cm2 Cast Iron Gate Valves
GATE VALVES with Bronze Trim
JIS F7365 – 5 kgf/cm2 Cast Steel Gate Valves
Size d L D C No. h Bolt t H I D1 a d6 d7 (kg)
50 50 180 130 105 4 15 M12 16 285 58 125 8 TW16 26 13.5
65 65 190 155 130 4 15 M12 18 330 74 140 9 TW18 28 19.0
80 80 200 180 145 4 19 M16 18 380 89 160 9 TW20 32 24.2
100 100 230 200 165 8 19 M16 20 430 109 180 10 TW22 36 35.3
125 125 250 235 200 8 19 M16 20 495 135 200 11 TW24 38 48.1
150 150 270 265 230 8 19 M16 22 560 159 224 12 TW26 42 65.3
200 200 290 320 280 8 23 M20 24 680 211 280 14 TW30 48 103
250 250 330 385 345 12 23 M20 26 800 262 355 16 TW34 54 164
300 300 370 430 390 12 23 M20 28 920 313 400 18 TW38 60 236
350 335 410 480 435 12 25 M22 30 1000 350 450 19 TW40 62 307
400 380 470 540 495 16 25 M22 30 1100 394 500 21 TW44 68 405
450 430 500 605 555 16 25 M22 30 1400 445 560 23 TW46 74 581
500 480 550 655 605 20 25 M22 32 1500 496 560 25 TW48 74 725
550 530 600 720 665 20 27 M24 32 1600 548 630 27 TW50 80 909
600 580 710 770 715 20 27 M24 32 1700 599 630 29 TW52 80 1150
Unit: mm

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0373-04 5/1/06 8:15 PM Page 371

383-06

JIS VALVES
CAST IRON (Bronze Trim) & CAST STEEL (SS Trim) GLOBE VALVES
JIS F7307 – 10 kgf/cm2 Cast Iron Globe Valves
JIS F7375 – 10 kgf/cm2 Cast Iron Screw-Down Check Globe Valves
JIS F7319 – 10 kgf/cm2 Cast Steel Globe Valves
JIS F7471 – 10 kgf/cm2 Cast Steel Screw-Down Check Globe Valves
Size d d1 L1 D C No. h Bolt t H F7307 F7375 D2 a d6 d7 (kg)
50 50 58 220 155 120 4 19 M16 20 285 17 15 160 10 TW22 36 19.9
65 65 73 270 175 140 4 19 M16 22 310 22 17 200 11 TW24 38 28.7
80 80 88 300 185 150 8 19 M16 22 320 27 20 200 11 TW24 38 32.4
100 100 111 350 210 175 8 19 M16 24 370 33 25 250 12 TW28 44 48.7
125 125 138 420 250 210 8 23 M20 24 420 42 31 280 13 TW32 50 73.1
150 150 163 490 280 240 8 23 M20 26 470 50 37 315 14 TW36 56 104
200 200 213 570 330 290 12 23 M20 26 555 67 46 355 17 TW42 66 162
250 250 265 740 400 355 12 25 M22 30 680 83 — 450 20 TW48 74 304
300 300 315 840 445 400 16 25 M22 32 770 100 — 500 22 TW52 80 458
Unit: mm

CAST IRON (Bronze Trim) & CAST STEEL (SS Trim) ANGLE VALVES
JIS F7308 – 10 kgf/cm2 Cast Iron Angle Valves
JIS F7376 – 10 kgf/cm2 Cast Iron Screw-Down Check Angle Valves
JIS F7320 – 10 kgf/cm2 Cast Steel Angle Valves
JIS F7472 – 10 kgf/cm2 Cast Steel Screw-Down Check Angle Valves
Size d d1 L1 D C No. h Bolt t H F7308 F7376 D2 a d6 d7 (kg)
50 50 58 120 155 120 4 19 M16 20 255 255 17 15 160 10 TW22 36 18.2
65 65 73 130 175 140 4 19 M16 22 270 260 22 17 200 11 TW24 38 25.4
80 80 88 140 185 150 8 19 M16 22 275 270 27 20 200 11 TW24 38 27.4
100 100 111 160 210 175 8 19 M16 24 315 305 33 25 250 12 TW28 44 40.6
125 125 138 180 250 210 8 23 M20 24 360 350 42 31 280 13 TW32 50 69.9
150 150 163 205 280 240 8 23 M20 26 405 390 50 37 315 14 TW36 56 81.0
200 200 213 230 330 290 12 23 M20 26 475 450 67 46 355 17 TW42 66 125
250 250 265 290 400 355 12 25 M22 30 570 — 83 — 450 20 TW48 74 211
300 300 315 320 445 400 16 25 M22 32 645 — 100 — 500 22 TW52 80 293
350 335 350 360 490 445 16 25 M22 34 710 — 112 — 560 24 TW58 88 386
400 380 403 420 560 510 16 27 M24 36 790 — 127 — 630 26 TW65 97 544
Unit: mm

CAST IRON (Bronze Trim) & CAST STEEL (SS Trim) GATE VALVES
JIS F7364 – 10 kgf/cm2 Cast Iron Gate Valves
JIS F7366 – 10 kgf/cm2 Cast Steel Gate Valves
Size d L D C No. h bolt t H I D1 a d6 d7 (kg)
50 50 200 155 120 4 19 M16 20 300 58 140 9 TW18 28 19.4
65 65 220 175 140 4 19 M16 22 350 74 160 10 TW20 32 27.6
80 80 230 185 150 8 19 M16 22 400 89 180 10 TW22 36 33.0
100 100 250 210 175 8 19 M16 24 450 110 200 11 TW24 38 45.8
125 125 270 250 210 8 23 M20 24 520 136 224 13 TW26 42 65.9
150 150 290 280 240 8 23 M20 26 580 160 250 14 TW28 44 86.0
200 200 320 330 290 12 23 M20 26 700 212 315 16 TW32 50 136
250 250 380 400 355 12 25 M22 30 840 264 400 18 TW38 60 230
300 300 440 445 400 16 25 M22 32 960 315 450 20 TW42 66 331
350 335 500 490 445 16 25 M22 34 1050 352 500 22 TW44 68 433
400 380 590 560 510 16 27 M24 36 1150 396 560 24 TW48 74 597
450 430 640 620 565 20 27 M24 38 1260 447 600 27 TW52 — 704
500 480 710 675 620 20 27 M24 40 1380 499 680 30 TW55 — 901
550 530 780 745 680 20 33 M30 42 1550 551 760 33 TW58 — 1192
600 580 850 795 730 24 33 M30 44 1675 602 800 36 TW62 — 1490
Unit: mm

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0374-04 5/1/06 8:16 PM Page 372

384-06

JIS VALVES

CAST IRON GLOBE VALVES with Bronze Trim


JIS F7309 – 16 kgf/cm2 Cast Iron Globe Valves
JIS F7377 – 16 kgf/cm2 Cast Iron Screw-Down Check Globe Valves
Size d d1 L D C No. h Bolt t H I D2 a d6 d7 (kg)
50 50 58 220 155 120 8 19 M16 20 285 17 (15) 160 10 TW22 36 19.6
65 65 73 270 175 140 8 19 M16 22 310 22 (17) 200 11 TW24 38 28.3
80 80 88 300 200 160 8 23 M20 24 340 27 (20) 224 12 TW26 42 40.4
100 100 111 350 225 185 8 23 M20 26 385 33 (25) 250 13 TW30 48 56.9
125 125 138 430 270 225 8 25 M22 26 455 42 (31) 315 15 TW36 56 89.5
150 150 163 500 305 260 12 25 M22 28 510 50 (37) 355 16 TW42 66 123
200 200 213 570 350 305 12 25 M22 30 630 67 (—) 450 19 TW48 74 188
Unit: mm ( ) Lift of Check Valves

CAST IRON ANGLE VALVES with Bronze Trim


JIS F7310 – 16 kgf/cm2 Cast Iron Angle Valves
JIS F7378 – 16 kgf/cm2 Cast Iron Screw-Down Check Angle Valves
Size d d1 L1 D C No. h Bolt t H I D2 a d6 d7 (kg)
50 50 58 120 155 120 8 19 M16 20 255 17 (15) 160 10 TW22 36 18.0
65 65 73 130 175 140 8 19 M16 22 270 22 (17) 200 11 TW24 38 25.0
80 80 88 150 200 160 8 23 M20 24 295 27 (20) 224 12 TW26 42 35.7
100 100 111 170 225 185 8 23 M20 26 330 33 (25) 250 13 TW30 48 49.2
125 125 138 200 270 225 8 25 M22 26 390 42 (31) 315 15 TW36 56 76.1
150 150 163 225 305 260 12 25 M22 28 435 50 (37) 355 16 TW42 66 103
200 200 213 250 350 305 12 25 M22 30 540 67 (—) 450 19 TW48 74 155
Unit: mm ( ) Lift of Check Valves

CAST IRON GATE VALVES with Bronze Trim


JIS F7369 – 16 kgf/cm2 Cast Iron Gate Valves
Flange
Bolt Hole Bolt Weight
Size d L D C No. h Size t H W (kg)
50 50 210 155 120 8 19 M16 20 300 140 19.5
65 65 240 175 140 8 19 M16 22 350 160 28
80 80 260 200 160 8 23 M20 24 400 180 35
100 100 290 225 185 8 23 M20 26 450 200 50
125 125 310 270 225 8 25 M22 26 520 250 70
150 150 330 305 260 12 25 M22 28 580 280 100
200 200 370 350 305 12 25 M22 30 700 355 150
250 250 430 430 380 12 27 M24 34 845 450 250
300 300 490 480 430 16 27 M24 36 1010 500 423
350 335 540 540 480 16 33 M30 38 1070 560 580
400 380 610 605 540 16 33 M30 42 1160 630 780
Unit: mm

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0375-04 5/1/06 8:16 PM Page 373

385-06

CAST STEEL VERTICAL AND ANGLE STORM VALVES


With Locking Device — Flanged Ends

JIS F3059 – 5 kgf/cm2 Straight


Size d L L1 D t a H H1 W Weight
F3059
50 50 210 — 130 14 8 131 328 100 11.5
65 65 240 — 155 14 9 141 335 100 16.5
80 80 260 — 180 14 9 155 335 125 21.6
100 100 280 — 200 16 10 171 340 125 29.6
125 125 330 — 235 16 11 195 340 125 43.6
150 150 360 — 265 18 12 212 345 125 51.6
Unit: mm

No. Parts Material


1 Body Cast steel
2 Bonnet Cast steel
3 Disc Bronze
4 Disc lever Bronze F3060
5 Weight Lead
6 Bushing Bronze
7 Nut Bronze
8 Gland Bronze JIS F3060 – 5 kgf/cm2 Angle
9 Spindle Brass
10 Plug Brass Size d L L1 D t a H H1 W Weight
11 Stud bolt & nut Brass 50 50 170 90 130 14 8 131 328 100 13.0
12 Screw & nut Brass 65 65 200 100 155 14 9 141 335 100 19.0
13 Pin Brass 80 80 220 120 180 14 9 155 335 125 23.8
14 Packing Asbestos 100 100 250 130 200 16 10 171 340 125 29.6
15 Packing Neoprone 125 125 270 150 235 16 11 195 340 125 50.0
16 Plate Bronze or brass plate
150 150 310 165 265 18 12 212 345 125 67.0
17 Screw & nut Brass
Unit: mm
18 Gasket Asbestos
19 Hand wheel Cast iron
20 Name plate Brass
21 Handle nut Brass
22 Split pin Brass wire

CAST IRON SWING CHECK


VALVES WITH BRONZE TRIM
JIS F7372 – 5 kgf/cm2 JIS F7373 – 10 kgf/cm2
Size d L D C No. h Bolt t H a D1 d6 d7 (kg)
190 130 105 4 15 M12 16 97 8 135 9.06
50 50 (210) (155) (120) (4) (19) (M16) (20) (109) (10) (150) 9 M12 x 1.25 (13.6)
220 155 130 4 15 M12 18 119 9 155 13.9
65 65 (240) (175) (140) (4) (19) (M16) (22) (126) (11) (170) 11 M16 x 1.5 (19.6)

80 80 250 180 145 4 19 M16 18 129 9 185 19.1


(270) (185) (150) (8) (19) (M16) (22) (136) (11) (185) 12 M16 x 1.5 (22.6)
280 200 165 8 19 M16 20 146 10 205 27.1
100 100 (300) (210) (175) (8) (19) (M16) (24) (153) (12) (205) 14 M20 x 1.5 (30.9) No. Part Material JIS

330 235 200 8 19 M16 20 171 11 235 39.0 1 Body Cast Iron G5501 FC 20
125 125 (350) (250) (210) (8) (23) (M20) (24) (180) (13) (250) 17 M20 x 1.5 (49.2) 2 Bonnet Cast Iron G5501 FC 20
380 265 230 8 19 M16 22 198 12 265 53.7 3 Disc Cast Bronze H5111 BC 6
150 150 (400) (280) (240) (8) (23) (M20) (26) (205) (14) (275) 20 M24 x 2 (54.9)
4 Seat Cast Bronze H5111 BC 6
200 200 460 320 280 8 23 M20 24 235 15 330 94.4 5 Arm Cast Bronze H5111 BC 6
(480) (330) (290) (12) (23) (M20) (26) (242) (17) (330) 24 M30 x 2 (103)
6 Hinge Pin Brass Bar H3250 C3771BD
550 385 345 12 23 M20 26 290 16 390 28 M36 x 2 150
250 250 (—) (—) (—) ( — ) ( — ) (M — ) (—) (—) (—) (—) (—) (—) (—) 7 Plug Brass Bar H3250 C3771BD

Unit: mm; ( ) = 10kgf/cm2 Dimension

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 World Wide Metric
Tel: 713-682-2400 • Fax: 713-682-2481
World Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
380 5/1/06 8:17 PM Page 374

386-06

BUTTERFLY VALVES
These JIS valves are available with JIS, DIN, or ANSI flange drilling
(see flange drilling chart below and on facing page). Specify when ordering.

720F
Flanged
700S
Steel Body
Standard Marine
Butterfly
Butterfly Valve
Valve

700G
Butterfly Valve with Cosine Curve Seat
allowing operation with a small actuator

Notation (L) = Face to Face (C) = Bolt Circle


Face-To-Face Dimension Chart (n-h) = Number of Holes (Bolt) = Size of Hole
Flange Dimension Chart

JIS 700S 700G 720F JIS 5K 10K ANSI 150 Lbs.


Size L L L Size C n-h Bolt C n-h Bolt C n-h Bolt
50 45 43 45 50 105 4 x 15 120 4 x 19 121 4 x 20
65 45 46 45 65 130 4 x 15 140 4 x 19 140 4 x 20
80 50 46 50 80 145 4 x 19 150 8 x 19 152 8 x 20
100 50 52 50 100 165 8 x 19 175 8 x 19 190 8 x 20
125 55 56 100 125 200 8 x 19 210 8 x 23 216 8 x 23
150 60 56 100 150 230 8 x 19 240 8 x 23 241 8 x 23
200 65 60 100 200 280 8 x 23 290 12 x 23 298 8 x 23
250 80 68 110 250 345 12 x 23 355 12 x 25 362 12 x 26
300 90 78 110 300 390 12 x 23 400 16 x 25 431 12 x 26
350 100 - 120 350 435 12 x 25 445 16 x 25 476 12 x 28
400 110 - 130 400 495 16 x 25 510 16 x 27 540 16 x 27
450 120 - 150 450 555 16 x 25 565 20 x 27 578 16 x 32
500 140 - 160 500 605 20 x 25 620 20 x 27 635 20 x 32
600 160 - 170 600 715 20 x 27 730 24 x 33 750 20 x 35
Unit: mm

Body Seat Materials Chart Disc Actuation


Cast Iron NBR Stainless Steel Lever
Ductile Iron EPDM To order, specify size, Alum-Bronze Worm Gear
Carbon Steel Viton (FKM) body, seat, disc, stem, Electric
flange drilling and Stem
Stainless Steel Teflon (PTFE) Pneumatic
actuation. Stainless Steel
Bronze Hydraulic

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
world wide
World metric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
381 5/1/06 8:19 PM Page 1

387-06

WOUTER WITZEL
BUTTERFLY VALVES
These DIN valves are available with DIN, ANSI or JIS flange drilling (see flange drilling chart below and on facing page).
Specify when ordering.

Wafer Pattern Lug Pattern Flanged Pattern


EVS, EVL EVTLS EVFS, EVFL
(short and long pattern) (short and long pattern)

Face-To-Face Dimension Chart Flange Dimension Chart


EVS, EVCS, EVL, Notation (L) = Face to Face, (n-h) = Number of Holes, (C) = Bolt Circle, (Bolt) = Size of Hole
EVBS, EVTLS, EVML, EVFS EVFL
EVMS, EVBLS ECV DIN PN6 PN10 PN16
SIZE L L L L SIZE C n-h Bolt C n-h Bolt C n-h Bolt
50 43 43 108 150 50 110 4 x 14 125 4 x 18 125 4 x 18
65 46 46 112 170 65 130 4 x 14 145 4 x 18 145 4 x 18
80 46 64 114 180 80 150 4 x 18 160 8 x 18 160 8 x 18
100 52 64 127 190 100 170 4 x 18 180 8 x 18 180 8 x 18
125 56 70 140 200 125 200 8 x 18 210 8 x 18 210 8 x 18
150 56 76 140 210 150 225 8 x 18 240 8 x 22 240 8 x 22
200 60 89 152 230 200 280 8 x 18 295 8 x 22 295 12 x 22
250 68 114 165 250 250 335 12 x 18 350 12 x 22 355 12 x 26
300 78 114 178 270 300 395 12 x 22 400 12 x 22 410 12 x 26
350 78 127 190 290 350 445 12 x 22 460 16 x 22 470 16 x 26
400 102 140 216 310 400 495 16 x 22 515 16 x 26 525 16 x 30
450 114 152 222 330 450 550 16 x 22 565 20 x 26 585 20 x 30
500 127 152 229 350 500 600 20 x 22 620 20 x 26 650 20 x 33
600 154 178 267 390 600 705 20 x 26 725 20 x 30 770 20 x 36

Type Approvals from LRS, DNV, ABS, BV, GL, RINA, NKK and many others.

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481

SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA


Distributed in North America by Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
WORLD WIDE METRIC INC.
www.worldwidemetric.com • sales@worldwidemetric.com
0378-04 5/1/06 8:19 PM Page 376

388-06

JIS VALVES
JIS F7350 – 5 kgf/cm2 and 10 kgf/cm2 HULL CAST STEEL ANGLE VALVES
Flange Dimension: 10kgf/cm2 Changeable to 5kgf/cm
Size d d1 L1 L2 D C No. h Bolt t H I D2 a D1 d5 d6 (kg)

H (when fully opened)


200 200 213 265 230 330 290 12 23 M20 22 700 140 355 18 335 36 TW36 146
250 250 268 325 290 400 355 12 25 M22 24 835 175 400 20 425 42 TW42 237
Left hand double threads
300 300 320 365 320 445 400 16 25 M22 24 970 210 450 22 465 46 TW46 313
350 335 350 360 320 490 445 16 25 M22 26 1010 248 500 22 510 48 TW48 376
400 380 400 400 350 560 510 16 27 M24 28 1130 285 600 23 565 52 TW52 490
450 430 450 450 380 620 565 20 27 M24 30 1250 320 710 24 620 58 TW58 632
500 480 505 500 430 675 620 20 27 M24 30 1380 355 800 25 695 65 TW65 839
550 530 555 550 460 745 680 20 33 M30 32 1505 392 900 26 755 70 TW70 1060
600 580 610 610 500 795 730 24 33 M30 32 1630 428 900 27 820 75 TW75 1270
650 630 660 660 540 845 780 24 33 M30 34 1765 465 1000 28 890 82 TW82 1590
700 680 710 710 570 905 840 24 33 M30 34 1890 500 1000 29 950 90 TW90 1930
750 730 765 760 610 970 900 24 33 M30 36 2005 535 1250 30 1015 95 TW95 2300
800 780 815 810 650 1020 950 28 33 M30 36 2115 570 1250 31 1035 100 TW100 2720
Unit: mm

ANSI 150 LB. GATE VALVE


Bronze (Stainless Steel Trim) or Steel (Stellite Trim) – Non-Rising Stem

Material Table Steel Valve


No. Descriptions Material
1 Body Steel A216
2 Seat Stellite
3 Disc Stellite
4 Stem 13 Cr St Steel
5 Bonnet Steel A216
6 Hand Wheel Iron A-197

Material Table Bronze Valve


No. Descriptions Material
1 Body Bronze
2 Seat 316 Stainless Steel
3 Disc 316 Stainless Steel
4 Stem SUS 403
5 Bonnet Bronze BC-6
6 Hand Wheel Iron A-197

Size 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12”


Face to Face L 7” 7-1/2” 8” 9” 10” 10-1/2” 11-1/2” 13” 14”
Valve Height H 11-7/8” 13-7/8” 15-5/8” 17-5/8” 20-1/2” 22-5/8” 27-1/2” 33” 37-5/8”
Flange Diam. D 6” 7” 7-1/2” 9” 10” 11” 13-1/2” 16” 19”
Bolt Circle C 4-3/4” 5-1/2” 6” 7-1/2” 8-1/2” 9-1/2” 11-3/4” 14-1/4” 17”

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 world Wide Metric Tel: 713-682-2400 • Fax: 713-682-2481
World Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
0379-04 5/1/06 8:20 PM Page 377

389-06

ANSI 150 LB. GLOBE AND ANGLE VALVES


Bronze (Stainless Steel Trim) or Steel (Stellite Trim) – Bolted Bonnet – Rising Stem

Material Table Steel Valve


No. Descriptions Material
1 Body Steel A216
2 Seat Stellite
3 Disc Stellite
4 Stem 13% Cr St Steel
5 Bonnet Steel A216
6 Hand Wheel Iron A-197

C D

Material Table Bronze Valve


No. Descriptions Material
1 Body Bronze BC-6
2 Seat 316 Stainless Steel
3 Disc 316 Stainless Steel
C D
4 Stem SUS 403
5 Bonnet Bronze BC-6
6 Hand Wheel Iron A-197

Size 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12”


Face to Face L 8” 1-1/2” 9-1/2” 11-1/2” 14” 16” 19-1/2” 24-1/2” 27-1/2”
Face to Center L 1 4” 4-1/4” 1-3/4” 5-3/4” 7” 8” 9-3/4” 12-1/4” 13-3/4”
Valve Height H 13-3/8” 14-1/2” 16-1/2” 19” 24” 24” 26-3/4” 30” 33-7/8”
Flange Diam. D 6” 7” 7-1/2” 9” 10” 11” 13-1/2” 16” 19”
Bolt Circle C 4-3/4” 5-1/2” 6” 7-1/2” 8-1/2” 9-1/2” 11-3/4” 14-1/4” 17”

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
0380-04 5/1/06 8:21 PM Page 378

390-06

DIN VALVES
DN1000 – 6 BAR FLANGED CAST IRON GATE VALVES
Bolted Bonnet – Inside Screwed Spindle – Bronze Trim

D 40 50 65 80 100 125 150 200 250 300 350 400 450 500

L 140 150 170 180 190 200 210 230 250 270 290 310 330 350

A 150 165 185 200 220 250 285 340 405 460 505 565 615 670

R 3/8” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”

H 230 240 270 310 345 435 510 645 695 810 970 1085 1170 1300

M 140 140 160 160 180 200 200 280 280 325 375 425 425 500

Wt 8 9 14 18 24 39 59 92 129 156 242 320 415 565

Dimensions in mm and inches / weights in kg

DN1001 – 10 BAR FLANGED CAST IRON GATE VALVES


Bolted Bonnet – Inside Screwed Spindle – Bronze Trim

D 350 400 450 500 600 700 800 900 1000

L 290 310 330 350 390 430 470 510 550

A 520 580 640 715 840 910 1025 1125 1255

M 400 400 500 500 600 700 700 800 800

H 845 895 1035 1110 1200 1480 1660 1815 1990

Wt 230 285 365 450 950 1350 1650 1800 2000

Dimensions in mm / weights in kg

DN1012 – 16 BAR FLANGED CAST STEEL GATE VALVES


Bolted Bonnet – Bronze Trim

D 40 50 65 80 100 125 150 200 250 300 350 400 500

L 140 150 170 180 190 200 210 230 250 270 290 310 350

A 150 165 185 200 220 250 285 340 395 445 505 565 670

H 265 290 305 340 365 420 455 560 640 745 850 935 1135

M 160 160 160 160 200 250 250 250 315 315 400 400 500

Wt 13 16 19 24 31 40 49 73 111 140 190 240 510

Dimensions in mm / weights in kg

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0381-04 5/1/06 8:22 PM Page 379

391-06

DIN VALVES
DN2002 – 16 BAR FLANGED CAST IRON GLOBE VALVES
Bolted Bonnet – Outside Screw & Yoke – Stainless Steel Trim

D 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300

L 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850

L1 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375

A 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460

H 184 196 214 225 248 279 324 359 404 465 520 577 665 830 945

H1 160 165 175 185 215 235 270 290 350 410 450 490 560 740 840

M 100 100 125 125 150 150 200 200 225 225 300 300 420 500 500

Wt 3,5 4,3 5,5 7,8 10,2 13,2 21 26,3 40,6 59,8 83 112 136 217 325

Dimensions in mm / weights in kg

DN2015 – 40 BAR FLANGED CAST STEEL GLOBE VALVES


Bolted Bonnet – Outside Screw & Yoke

D 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300

L 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850

L1 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375

A 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515

H 227 240 245 250 300 312 350 395 450 520 590 655 750 875 990

H1 217 220 225 250 280 300 340 365 410 460 530 605 690 875 990

M 100 100 125 125 150 150 200 200 250 250 300 420 420 500 575

Wt 5 6 7 11 14 19 30 33 49 69 97 155 180 275 370

Dimensions in mm / weights in kg

DN2018 – 160 BAR FLANGED CAST STEEL GLOBE VALVES


Bolted Bonnet – Outside Screw & Yoke

D 10 15 20 25 32 40 50 65 80 100 125 150

L 210 210 230 230 260 260 300 340 380 430 500 550

A 100 105 130 140 155 170 195 220 230 265 315 355

H 255 255 255 255 325 325 335 400 455 490 565 650

M 140 140 180 180 200 200 250 280 320 360 400 500

Wt 8,5 9 12,5 13 22,5 23 29 55 73 106 168 246

Dimensions in mm / weights in kg

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0382-04 5/1/06 8:23 PM Page 380

392-06

DIN VALVES
Dimensions in millimeters
CAST STEEL YOKE S 38.1 111-540/240
TYPE GATE VALVES DN D L V Z D1 D2 D3 D6 a f d n Dk I Design Wt.(kg)
40 40 240 418 55 145 110 88 85 18 3 18 4 200 — A 26.5
50 50 250 426 67 160 125 102 95 20 3 18 4 200 — A 30.5
65 70 290 520 86 180 145 122 115 22 3 18 8 250 — A 40
80 80 310 555 95 195 160 138 130 24 3 18 8 250 — A 53
100 100 350 644 120 230 190 162 150 24 3 23 8 250 — A 66
125 125 400 746 145 270 220 188 175 26 3 27 8 315 300 A 103
150 150 450 855 172 300 250 218 200 28 3 27 8 400 340 A 146
200 200 550 1065 225 375 325 280 260 34 3 30 12 450 380 A 223
250 250 650 1268 278 445 385 345 315 38 3 33 12 500 420 B 383
300 300 750 1452 330 510 450 410 365 42 4 33 16 500 440 B 520
350 350 850 1607 363 570 510 465 415 46 4 33 16 560 470 B 700
400 400 950 1837 420 655 585 535 475 50 4 40 16 630 500 B 910
500 500 1150 2239 520 755 670 615 580 52 4 42 20 710 580 B 1448

S 38.1 111-564/264
DN D L V Z D1 D2 D3 D5 D6 a f, f2 d n Dk I Design Wt.(kg)
50 50 250 426 67 175 135 108 88 100 26 3 23 4 200 — A 38
65 70 290 520 86 200 160 132 110 120 26 3 23 8 250 — A 53
80 80 310 555 96 210 170 142 121 135 28 3 23 8 250 — A 66
100 100 350 664 120 250 200 170 150 160 30 3 27 8 315 — A 92
125 125 400 746 145 295 240 — 176 190 34 3 30 8 315 300 A 131
150 150 450 921 175 340 280 — 204 220 36 3 33 8 500 340 B 210
200 200 550 1090 225 405 345 — 260 275 42 3 33 12 500 380 B 333
250 250 650 1335 275 470 400 — 313 325 46 3 36 12 630 420 B 495
300 300 750 1514 330 530 460 — 365 375 52 4 36 16 630 460 B 675
350 350 850 1622 358 595 525 — 422 435 56 4 40 16 630 500 B 911
400 400 950 1837 420 670 585 — 474 485 60 4 42 16 630 530 B 1206

TO ORDER: In an order, it is S 38.1 111-5100/2100


necessary to state the kind of the
DN D L V Z D1 D2 D3 D5 D6 a f, f2 d n Dk I Design Wt.(kg)
gate valve and its production no., 40 38.5 240 418 55 165 125 96 76 85 26 3 23 4 200 — A 33
nominal inside diameter, through- 50 49 250 426 67 195 145 115 88 100 28 3 27 4 200 — A 42
flowing medium and its working 65 66 290 520 86 220 170 140 110 120 30 3 27 8 250 — A 60
overpressure, temperature and 80 78 310 555 96 230 180 150 121 135 32 3 27 8 250 — A 77
100 95 350 664 120 265 210 175 150 160 36 3 30 8 315 — A 120
pressure gradient on the closure.
125 117 400 746 145 310 250 — 176 190 40 3 33 8 315 300 A 164
150 139 450 921 175 350 290 — 204 220 44 3 33 12 500 340 B 261
200 191 550 1090 225 430 360 — 260 275 52 3 36 12 500 380 B 434
250 241 650 1335 275 500 430 — 313 325 60 3 40 12 630 420 B 689
300 284 750 1514 330 585 500 — 364 375 68 4 42 16 630 460 B 1000
PN 25 S 38.1 111-525
S 38.1 111-225 Material of Highest permissible working overpressure in MPa
PN Valve at temperatures up to °C
Body –55 –50 –25 200 300 400 425 450 475 500 525 550
PN 40 S 38.1 111-540 25 42 2643.1 — — 2.5 2.5 2.0 1.6 1.4 1.1 — — — —
S 38.1 111-240 25 42 2744.5 — — — 2.5 2.2 2.0 1.9 1.8 1.7 1.6 1.6 1.6
25 42 2714.9 2.5 2.5 2.5 2.5 2.0 1.6 — — — — — —
40 42 2643.1 — — 4.0 4.0 3.2 2.5 2.2 1.8 — — — —
PN 64 S 38.1 111-564 40 42 2744.5 — — — 4.0 3.6 3.2 3.1 2.9 2.8 2.7 2.6 2.5
S 38.1 111-264 40 42 2714.9 4.0 4.0 4.0 4.0 3.2 2.5 — — — — — —
64 42 2643.1 — — 6.3 6.3 5.0 4.0 3.6 2.8 — — — —
64 42 2744.5 — — — 6.3 5.7 5.0 4.9 4.7 4.5 4.3 4.2 4.0
PN 100 S 38.1 111-5100 64 42 2714.9 6.3 6.3 6.3 6.3 5.0 4.0 — — — — — —
S 38.1 111-2100 100 42 2643.1 — — 10.0 10.0 8.0 6.3 5.6 4.4 — — — —
100 42 2744.5 — — — 10.0 8.9 8.0 7.7 7.4 7.0 6.7 6.5 6.3
100 42 2714.9 10.0 10.0 10.0 10.0 8.0 6.3 — — — — — —

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0383-04 5/1/06 8:25 PM Page 381

393-06

DIN VALVES
PN10 DIN VERTICAL STORM VALVE
Nominal Pressure: 1 kp/cm2
Test Pressure: 5 kp/cm2

No. Part Material No. Part Material


1 Body SC49 9 Packing Gland Brass
2 Cover SC49 10 Packing ABS
3 Disc BC6 11 Nut Brass
4 Bushing BC6 12 Split Pin Brass
5 Seat NBR 13 Pin Brass
6 Plate Brass 14 Handle FC20
7 Plug Brass 15 Weight Lead
8 Stem Brass 16 Bolt & Nut Brass

DN t D C nxh L H L1 L2 h s▫ HD
50 18 165 125 4 x 18 200 356 137 110 95 10 100
65 18 185 145 4 x 18 240 396 148 120 95 10 100
80 20 200 160 8 x 18 260 450 174 140 95 10 100
100 20 220 180 8 x 18 300 490 195 155 95 10 100
125 22 250 210 8 x 18 350 572 216 175 95 10 125
150 22 285 240 8 x 22 400 622 242 195 95 10 125
Dimensions in millimeters

PN10 DIN ANGLE STORM VALVE


Nominal Pressure: 1 kp/cm2
Test Pressure: 5 kp/cm2

No. Part Material No. Part Material


1 Body SC49 8 Stem Brass
2 Cover SC49 9 Packing Gland Brass
3 Disc BC6 10 Packing ABS
4 Bushing BC6 11 Nut Brass
5 Seat NBR 12 Split Pin Brass
6 Plate Brass 13 Drain Plug Brass
7 Plug Brass 14 Handle FC20

DN t1 t2 D1 D2 D3 C1 n x h1 C2 n x h2 L1 R H H2 s▫ HD
50 13 14 165 200 68 125 4 x 18 160 8 x 18 180 R1⁄2” 333 90 10 100
65 14 15 185 220 85 145 4 x 18 180 8 x 18 200 R5⁄8” 341 99 10 100
80 14 15 200 250 100 160 8 x 18 210 8 x 18 215 R3⁄4” 351 108 10 100
100 14 17 220 285 130 180 8 x 18 240 8 x 22 250 R1” 413 130 10 100
125 16 18 250 315 158 210 8 x 18 270 8 x 22 290 R1” 438 152 10 125
150 18 20 285 340 190 240 8 x 22 295 8 x 22 330 R1” 465 176 10 125
Dimensions in millimeters

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0384-04 5/1/06 8:25 PM Page 1

394-06

3-PIECE STAINLESS STEEL FLANGED BALL VALVES


DIN (PN 40) – JIS (40 K) – ANSI (600 PSI)
No. Part Material Qty.
1 Body WCB 316 1
2 Cap WCB 316 2 10
M 13
3 Ball 304 316 1
4 Seat Rein Teflon 15% Gel 2 12
9
5 Stem AISI316 1 b
t 11
6 Thrust Washer Rein Teflon 15% Gel 1
5
7 Stem Packing Teflon 2

H
7
8 Bolt Nut AISI304 4
6
9 Handle AISI304 4
4
10 Plastic Cover Plastic 1

D
G
K

d
3
11 Gland Nut AISI304 1
12 Stem Washer AISI304 1 2
13 Stem Nut AISI304 1 øI x n
L 1
8
Pressure Temperature Rating
for PN 40 Ball Valve 6
1400
90
1200 d K G D H M L b t I/n CV Factor Torque N/M KG
80
15 1/2" 15 65 45 95 49 115 130 14 2 14/4 10 4.3 2.1
1000 m
PRESSURE (BAR)

70
PRESSURE (PSI)

40 m
mm – 3 3/4" 20 75 58 105 52 115 150 16 2 14/4 25 6.5 3.1
2 60
800 50 m
mm m 1" 25 85 68 115 72 152 160 16 2 14/4 35 10.1 4.1
–8 50
600 0m 1-1/4" 32 100 78 140 78 152 180 16 2 18/4 45 15.8 6.0
m 40
400 30
1-1/2" 40 110 88 150 86 186 200 16 3 18/4 80 18.7 7.4
20 2" 50 125 102 165 95 186 230 18 3 18/4 110 23.0 10.5
200
10 2-1/2" 65 145 122 185 130 234 290 21 3 18/8 310 43.0 16.4
0 100 200 300 400 500
3" 80 160 138 200 142 234 310 21 3 18/8 360 220 24.0
TEMPERATURE (°F) Unit: mm unless noted otherwise

SLIDE TYPE EXPANSION JOINTS


No. Description Material
DIN – JIS – ANSI
3 2 7 6 8 4 5 1
1 Body Nodular Iron FCD 45
2 Sleeve Stainless Steel SUS 304
3 Flange Steel SS 41 T
4 Bush Brass BC 6
5 Packing Asbestos Free
6 Gland Steel SS 41
D K
7 Stud Bolt Stainless Steel SUS 304
8 Nut Stainless Steel SUS 304

Still and non-shock water Steam Oil


of 120°C or less of 205°C or less of 120°C or less
Max. working pressure = Max. working pressure = Max working pressure =
14 kg/cm 10 kg/cm 10 kg/cm L

Size 50 65 80 100 125 150 200 250


Set Length 368 382 415 415 432 439 450 475
L (Max. Length) 423 442 475 475 492 499 518 535
L (Min. Length) 313 322 355 355 372 379 398 415
No. of No. of No. of No. of No. of No. of No. of No. of
D K Holes D K Holes D K Holes D K Holes D K Holes D K Holes D K Holes D K Holes
ANSI 150 NA NA 190 152 8 229 190 8 254 216 8 279 241 8 343 298 8 406 362 12
ANSI 300 NA NA 210 168 8 254 200 8 279 235 8 318 270 12 381 330 12 445 387 16
JIS 5K 130 105 4 155 130 4 180 145 4 200 165 8 235 200 8 265 230 8 320 280 8 385 345 12
JIS 10K 155 120 4 175 140 4 185 150 8 210 175 8 250 210 8 280 240 8 330 290 12 400 355 12
JIS 20K NA NA 200 160 8 225 185 8 270 225 8 305 260 12 350 305 12 430 380 12
PN 10 165 125 4 185 145 4 200 160 4 220 180 8 250 210 8 285 240 8 340 295 8 395 350 12
PN 16 165 125 4 185 145 4 200 160 8 220 180 8 250 210 8 285 240 8 340 295 12 405 355 12
Unit: mm

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
389 5/1/06 8:27 PM Page 1

395-06

Japanese (JIS) & European (DIN) Metric Flanges


METRIC FLANGE DIMENSIONS
NOM.
DIN 6K DIN 10K DIN 16K DIN 25K DIN 40K JIS 5K JIS 10K JIS 16K JIS 20K JIS 40K
DIA. (mm)
75 90 90 90 90 75 90 90 90 110
The dimensions in each
box of this chart represent: 10 50 60 60 60 60 55 65 65 65 75
4 x 11 4 x 14 4 x 14 4 x 14 4 x 14 4 x 12 4 x 15 4 x 15 4 x 15 4 x 19
Flange Diameter 80 95 95 95 95 80 95 95 95 115
Bolt Circle Diameter (Pitch) 15 55 65 65 65 65 60 70 70 70 80
Bolt Holes x Hole Diameter 4 x 11 4 x 14 4 x 14 4 x 14 4 x 14 4 x 12 4 x 15 4 x 15 4 x 15 4 x 19
90 105 105 105 105 85 100 100 100 120
20 65 75 75 75 75 65 75 75 75 85
4 x 11 4 x 14 4 x 14 4 x 14 4 x 14 4 x 12 4 x 15 4 x 15 4 x 15 4 x 19
100 115 115 115 115 95 125 125 125 130
25 75 85 85 85 85 75 90 90 90 95
4 x 11 4 x 14 4 x 14 4 x 14 4 x 14 4 x 12 4 x 19 4 x 19 4 x 19 4 x 19
120 140 140 140 140 115 135 135 135 140
32 90 100 100 100 100 90 100 100 100 105
4 x 14 4 x 18 4 x 18 4 x 18 4 x 18 4 x 15 4 x 19 4 x 19 4 x 19 4 x 19
130 150 150 150 150 120 140 140 140 160
40 100 110 110 110 110 95 105 105 105 120
4 x 14 4 x 18 4 x 18 4 x 18 4 x 18 4 x 15 4 x 19 4 x 19 4 x 19 4 x 23
SLIP ON 140 165 165 165 165 130 155 155 155 165
50 110 125 125 125 125 105 120 120 120 130
4 x 14 4 x 18 4 x 18 4 x 18 4 x 18 4 x 15 4 x 19 8 x 19 8 x 19 8 x 19
160 185 185 185 185 155 175 175 175 200
JAPANESE (JIS) 65 130 145 145 145 145 130 140 140 140 160
JIS-B-2201 4 x 14 4 x 18 4 x 18 4 x 18 4 x 18 4 x 15 4 x 19 8 x 19 8 x 19 8 x 23
190 200 200 200 200 180 185 200 200 210
5K JISB2221
80 150 160 160 160 160 145 150 160 160 170
10K JISB2222 4 x 18 8 x 18 8 x 18 8 x 18 8 x 18 4 x 19 8 x 19 8 x 23 8 x 23 8 x 23
16K JISB2223 210 220 220 235 235 200 210 225 225 250
100 170 180 180 190 190 165 175 185 185 205
20K JISB2224 4 x 18 8 x 18 8 x 18 8 x 22 8 x 22 8 x 19 8 x 19 8 x 23 8 x 23 8 x 25
40K JISB2225 240 250 250 270 270 235 250 270 270 300
125 200 210 210 220 220 200 210 225 225 250
8 x 18 8 x 18 8 x 18 8 x 26 8 x 26 8 x 19 8 x 23 8 x 25 8 x 25 8 x 27
265 285 285 300 300 265 280 305 305 355
150 225 240 240 250 250 230 240 260 260 295
8 x 18 8 x 22 8 x 22 8 x 26 8 x 26 8 x 19 8 x 23 12 x 25 12 x 25 12 x 33
EUROPEAN — 315 315 330 350 300 305 — — —
(DIN) 175 — 270 270 280 295 260 265 — — —
DIN 2501 — 8 x 22 8 x 22 12 x 26 12 x 30 8 x 23 12 x 23 — — —
320 340 340 360 375 320 330 350 350 405
PN 6
200 280 295 295 310 320 280 290 305 305 345
PN 10 8 x 18 8 x 22 8 x 22 12 x 26 12 x 30 8 x 23 12 x 23 12 x 25 12 x 25 12 x 33
PN 16 375 395 405 425 450 385 400 430 430 475
250 335 350 355 370 385 345 355 380 380 410
PN 25
12 x 18 12 x 22 12 x 26 12 x 30 12 x 33 12 x 23 12 x 25 12 x 27 12 x 27 12 x 33
PN 40 440 445 460 485 515 430 445 480 480 540
300 395 400 410 430 450 390 400 430 430 470
12 x 22 12 x 22 12 x 26 16 x 30 16 x 33 12 x 23 16 x 25 16 x 27 16 x 27 16 x 39
490 505 520 555 580 480 490 540 540 585
350 445 460 470 490 510 435 445 480 480 515
12 x 22 16 x 22 16 x 26 16 x 33 16 x 36 12 x 25 16 x 25 16 x 33 16 x 33 16 x 39
540 565 580 620 660 540 560 605 605 645
BLIND 400 495 515 525 550 585 495 510 540 540 570
16 x 22 16 x 26 16 x 30 16 x 36 16 x 39 16 x 25 16 x 27 16 x 33 16 x 33 16 x 39
All dimensions in mm 1 inch = 25.4 mm

★ METRICS ★ W & O SUPPLY


3485 Evergreen Ave. • Jacksonville, FL 32206
★ METRICS ★
– JIS AND DIN
– FITTINGS – GATE, GLOBE,
– FLANGES Tel: 800-962-9696 • 904-354-3800 ANGLE, CHECK
– TUBING & PIPE Fax: 904-355-5542 • www.wosupply.com – HOSE VALVES
– METALS jacksonville.fl@wosupply.com – BUTTERFLY VALVES
390 5/1/06 8:28 PM Page 1

396-06

METRIC HOSE VALVES – JAPANESE


5K and 10K JIS-F-7333
• Iron Body
• Bolted Bonnet, Bronze
Trim with “Nakajima”
Coupling
• Hose Threads to JIS-B-0207
• Also available with HOSE ANGLE VALVE
HOSE GLOBE VALVE National Hose (NH) Fig. 7333A – IRON
Fig. 7333G – IRON threads

Nominal Flanges Nominal Flanges


Pressure Size d L Bolt Holes Bolt Pressure Size d L Bolt Holes Bolt
Kgf/cm2 D C No. h Size T Kgf/cm2 D C No. h Size T
5 50 50 100 130 105 4 15 M12 16 5 50 50 105 130 105 4 15 M12 16
5 65 65 115 155 130 4 15 M12 18 5 65 65 125 155 130 4 15 M12 18
10 50 50 120 155 120 4 19 M16 20 10 50 50 110 155 120 4 19 M16 20
10 65 65 130 175 140 4 19 M16 22 10 65 65 135 175 140 4 19 M16 22

METRIC HOSE VALVES – EUROPEAN

10K and 16K


• Bronze body
• Bolted bonnet, bronze
trim with “Storz” coupling
• For fire and deckwash lines
Fig. 911 • Other couplings available
HOSE GLOBE
PN 16 Please specify: Fig. 907 Fig. 912
– Morris 30° HOSE ANGLE HOSE ANGLE
PN 10 PN 16
– Roth
– Guillemin
– National Hose

D A L L1 L2 M N H H1
40 150 165 90 65 140 52 200 175
50 165 185 107 75 140 66 200 185
65 185 220 112 90 160 81 230 200

STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK 3485 Evergreen Ave. • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
CHARLESTON Tel: 800-962-9696 • 904-354-3800 SAN DIEGO • LONG BEACH
JACKSONVILLE Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
391 5/1/06 8:29 PM Page 1

397-06

METRIC BRONZE VALVES – EUROPEAN


Fig. 1317 – Gate Valve
Fig. 291 –
• Bolted bonnet Gate Valve PN 16
• Non-rising stem
• Threaded bonnet
• Flanged ends
• Non-rising stem
• PN 16
• Flanged ends
• PN 16

D 40 50 65 80 100 125 150 175 200 250 300 D 15 20 25 32 40 50 65 80 100


L 140 150 170 180 190 200 210 220 230 250 270 L 75 75 80 90 100 110 130 150 160
A 150 165 185 200 220 250 285 315 340 395 445 A 95 105 115 140 150 165 185 200 220
H 230 255 295 325 395 415 485 530 600 725 815 H 105 105 115 130 150 180 220 250 315
M 120 135 160 160 190 220 220 220 250 300 300 M 60 60 80 80 100 120 120 140 180

Fig. 275 – Globe Valve Fig. 276 – Angle Valve


• Union bonnet • Union bonnet
• Flanged ends • Flanged ends
• PN 16 • PN 16

D 10 15 20 25 32 40 50 65 80 100
L 70 70 80 90 105 120 140 180 200 230
L1 65 65 70 75 90 100 105 115 125 —
A 90 95 105 115 140 150 165 185 200 220
H 110 115 125 140 155 175 195 225 225 280
H1 105 105 110 125 140 160 180 210 240 —
M 50 60 70 90 90 110 120 160 160 160

Fig. 1270 (short) Fig. 1271 (short)


Fig. 1270 DIN (long) Fig. 1271 DIN (long)
Globe Valve Angle Valve
• Bolted bonnet • Bolted bonnet
• Flanged ends • Flanged ends
• PN 16 • PN 16

SHORT PATTERN LONG PATTERN


D 15 20 25 32 40 50 65 80 100 125 150 175 200 D 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300
L 120 120 140 150 155 180 200 240 270 320 370 450 500 L 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850
L1 65 65 70 90 90 105 115 125 145 170 200 225 250 L1 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375
A 95 105 115 140 150 165 185 200 220 250 285 315 340 A 95 105 115 140 150 165 185 200 220 250 285 315 340 395 445
H 166 178 200 215 235 250 300 305 335 390 435 560 620 H 175 200 205 225 255 260 305 370 410 440 520 560 620 675 830
H1 157 175 190 205 215 235 260 265 285 310 340 500 570 H1 165 175 180 190 220 225 265 330 345 350 425 500 570 595 750
M 100 100 100 125 140 140 140 160 200 250 315 315 315 M 100 100 125 400 160 160 200 250 250 250 315 400 400 400 500

★ METRICS ★ W & O SUPPLY


3485 Evergreen Ave. • Jacksonville, FL 32206
★ METRICS ★
– JIS AND DIN
– FITTINGS – GATE, GLOBE,
– FLANGES Tel: 800-962-9696 • 904-354-3800 ANGLE, CHECK
– TUBING & PIPE Fax: 904-355-5542 • www.wosupply.com – HOSE VALVES
– METALS jacksonville.fl@wosupply.com – BUTTERFLY VALVES
392 5/1/06 8:30 PM Page 1

398-06

METRIC GLOBE & ANGLE VALVES – EUROPEAN


Globe PN 16 Angle PN 16
Fig. 263 Fig. 264
Nodular (ductile) iron, bronze trim Nodular (ductile) iron, bronze trim
Fig. 263LK Fig. 264LK
Nodular (ductile) iron – non return Nodular (ductile) iron – non return
Fig. 398 Fig. 399
Cast steel, bronze trim Cast steel, bronze trim
Fig. 398LK Fig. 399LK
Cast steel – non return Cast steel – non return

Working Pressure: 16 Bar – 20°C


D 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300
L 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850
L1 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375
A 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460
H 227 240 245 250 300 312 350 395 450 520 590 655 750 875 990
H1 217 220 225 250 280 300 340 365 410 460 530 605 690 875 990

Working Pressure: 40 Bar – 20°C


D 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300
L 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850
Angle PN 40
Globe PN 40 L1 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375 Fig. 418
Fig. 417LK A 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515
Cast steel, stainless trim
Cast steel, stainless trim H 227 240 245 250 300 312 350 395 450 520 590 655 750 875 990
Fig. 418LK
non return globe Cast steel – non return
H1 217 220 225 250 280 300 340 365 410 460 530 605 690 875 990

QUICK CLOSING GLOBE & ANGLE


with position indicator for emergency shut off. Manual lever available with hydraulic or pneumatic control.

D 15 20 25 32 40 50 65 80 100 125 150


L 130 150 160 180 200 230 290 310 350 400 480
Globe Angle
L1 90 95 100 105 115 125 145 155 175 200 225
Fig. 100/241 Cast iron PN 16 Fig. 100/242 Cast iron
220/ 250/ 285/
Stainless trim A 95 105 115 140 150 165 185 200 235 270 300 Stainless trim
Fig. 100/417 Cast steel PN 40 H 230 230 235 240 280 295 365 375 435 490 525 Fig. 100/418 Cast steel PN 40
Stainless trim H1 200 200 215 225 260 260 325 325 405 440 450
Stainless trim
M 100 100 125 125 150 150 200 200 250 250 300

STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK 3485 Evergreen Ave. • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
CHARLESTON Tel: 800-962-9696 • 904-354-3800 SAN DIEGO • LONG BEACH
JACKSONVILLE Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
393 5/1/06 8:31 PM Page 1

399-06

METRIC CHECK VALVES – EUROPEAN


Fig. 83 Fig. 109
• Working Pressure: • Working Pressure:
16 Bar – 20°C 16 Bar – 20°C
• Swing Check • Swing Check
• Cast Iron • Cast Steel
• Bronze Trim • Stainless Trim
• PN 16 • PN 16

D 40 50 65 80 100 125 150 200 250 300 350 400 D 40 50 65 80 100 125 150 200 250
L 180 200 230 260 300 350 400 500 600 700 800 900 L 180 200 240 260 300 350 400 500 600
A 150 165 185 200 220 250 285 340 395 445 505 565 A 150 165 185 200 220 250 285 340 405
H 110 117 124 147 157 187 197 246 300 343 386 430 H 130 165 175 190 215 235 265 305 355

Fig. 1101
Fig. 1101
• Working Pressure: D 15 20 25 32 40 50 65 80 100 125 150 175 200
16 Bar – 20°C L 130 150 160 180 200 230 290 310 350 400 480 550 600
• Lift Check A 95 105 115 140 150 165 185 200 220 250 285 315 340
• Horizontal Type H 70 80 85 100 110 115 130 145 165 185 205 235 250
• Cast Iron 2,4 3 3,8 5,7 7,4 10,3 15,2 20,4 31 49 69 101 132

Fig. 101
• Nodular (Ductile) D 15 20 25 32 40 50 65 80 100 125 150 175 200
|ron (Fig. 101) L 130 150 160 180 200 230 290 310 350 400 480 550 600
• Bronze Trim A 95 105 115 140 150 165 185 200 220 250 285 315 340
• PN 16 H 70 70 80 80 85 95 110 130 155 165 215 250 235
Fig. 101

Fig. 95
• Working Pressure:
40 Bar – 20°C
• Lift Check –
Horizontal Type D 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300
• Cast Steel L 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850
• Stainless Trim A 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515
Fig. 95
• PN 40 H 75 75 85 90 100 110 135 140 165 185 210 250 270 295 325

Fig. 68/68rvs
WAFER SWING CHECK
STEEL, STAINLESS, BRONZE

Fig. 68 (Steel), 68RVS (Stainless)


• Working Pressure: 25 Bar – 110°C
Fig. 69 (Bronze)
• Working Pressure: 16 Bar – 110°C
Fig. 69
Figure No. D 40 50 65 80 100 125 150 200 250 300 350 400 450 500
Fig. 68, Fig. 68RVS D — 26 38 47 70 92 114 143 190 214 263 305 342 400
Fig. 69 d 19 30 38 48 73 96 116 143 190 218 265 306 358 408
Fig. 68, Fig. 68RVS L — 19 19 19 19 19 19 29 29 38 44 51 60 64
Fig. 69 L 16 16 16 16 16 18 19 29 29 38 41 51 51 61
PN 10 A 94 109 129 144 164 195 221 276 330 380 440 491 541 596
PN 16 A 94 109 129 144 164 195 221 276 330 386 446 498 558 620

★ METRICS ★ W & O SUPPLY


3485 Evergreen Ave. • Jacksonville, FL 32206
★ METRICS ★
– JIS AND DIN
– FITTINGS – GATE, GLOBE,
– FLANGES Tel: 800-962-9696 • 904-354-3800 ANGLE, CHECK
– TUBING & PIPE Fax: 904-355-5542 • www.wosupply.com – HOSE VALVES
– METALS jacksonville.fl@wosupply.com – BUTTERFLY VALVES
0390-04 5/1/06 9:52 PM Page 1

400-06

INDUMAR PRODUCTS, INC.

EMERGENCY LEAK CONTROL KITS


DRUM & TANK REPAIR KIT

This kit is designed to quickly plug


holes in containers. Components
are specifically designed to repair
typical punctures, cracks, gashes
or surface rotting of containers. Various Holes in Tank Plugs Installed
Stainless steel used wherever
possible. All necessary tools and
hardware included. Kit also
available with non-sparking tools
ideal for salt-water environment. Kit “AE”
Crack in Tank 3” x 3” Patch Installed

EXTERNAL PIPE PATCH KIT

This kit is designed to patch pipes


from 1/2" - 4" diameter. Typical
uses include: water pipes, gas
lines, air lines, fuel transfer pipes,
External
chemical transfer lines, sewer Pipe
pipes, and more. Patch
Kit contains: 10 Stainless Steel Installed
standard pipe size patches from
1/2" to 4" (Larger sizes available)
and all necessary tools and
hardware.
Kit “C-2”

INTERNAL PIPE PLUG KIT

This kit is designed to plug pipes


from 0 - 4" diameter. Most plugs
have pressure relief vents to help
in getting plugs in and seated Internal
under pressure. Once plugged, Pipe
Plug
you can transfer material through Installed
vent via the valve and hose.
Kit contains: 10 standard pipe
size plugs from 3/4" to 4" and all
necessary tools and hardware.
Kit “C-1”

Contact us for more information, pricing or case histories showing how InduMar’s products reduce maintenance costs.

P.O. Box 770008 (713) 977-4100 In U.S., Toll free


Houston, Texas 77215-0008 (713) 977-4164 fax (800) 523-7867
PROBLEM SOLVING PRODUCTS FOR INDUSTRYTM Visit our web site - http://www.indumar.com
E-Mail: stopit@indumar.com
0395 5/1/06 9:54 PM Page 390

401-06

Style 38 Couplings for Steel Pipe


GASKETS
GRADE 27 (Buna S Blend) — The compound in most general use for
plain gaskets is Grade 27. This gasket has wide application and is
accepted as standard for most pipeline use. It is recommended for use
on lines carrying natural and other gases, air, fresh and salt water, most
acids, alkalines and sugar solutions, and some refrigerants.
GRADE 42 (Buna N Blend) — Grade 42 gaskets are resistant to oil,
most aromatic and aliphatic hydrocarbons, natural gas fogging oil,
condensates and gasolines.
BUTYL — Butyl gaskets are resistant to hot air service, steam, hot water,
and miscellaneous aqueous solutions. They are also suitable for
vegetable oils, organic chemicals, oxidizing acids or alkalines.
MATERIALS OF CONSTRUCTION EPDM — EPDM gaskets provide excellent resistance to aging factors
such as ozone, oxygen, and elevated temperatures. This includes
Sizes 1/2" thru 1-1/2": Sizes 2" and up: service in hot water, steam and dry heat.
• Followers: Ductile Iron or Malleable Iron • Followers: AISI C1012 or ASME SA36
• Middle Ring: ASTM A513 • Middle Ring: ASTM A513 or ASME FLUOROCARBON — Fluorocarbon gaskets are highly resistant to
• Bolts: AWWA C 111/ANSI A 21.11 SA675 GR60 hydrocarbons, aromatic hydrocarbons, alcohols, organic acids,
nitrogen-containing compounds, vegetable oils and greases.
• Bolts: AWWA C 111/ANSI A 21.11
GASKETS
PIPE (STEEL) MIDDLE BOLTS Section OVERALL WORKING MAXIMUM SHIPPING
RING Number, Dimensions DIMENSIONS PRESSURE TEST WEIGHT
Outside Thickness Diameter Thickness Lbs./Sq. In. PRESSURE Each
Nominal and Length and Length (Approx.)
Diam. and Length Diam. Length Lbs./Sq. In.
Size (A & B) (D x E) Lbs.
(OD) (F & G) (H) (L)
1/2 .840 .120 x 3-1/2 2 – 3/8 x 5 9/32 x 9/16 3-1/2 4-3/8 1500 2250 2
3/4 1.050 .120 x 5 2 – 1/2 x 6-3/4 9/32 x 9/16 3-13/16 5-7/8 1500 2250 3
1 1.315 .134 x 5 2 – 1/2 x 6-3/4 9/32 x 9/16 4-1/16 5-7/8 1500 2250 4
1-1/4 1.660 .140 x 5 2 – 1/2 x 6-3/4 9/32 x 9/16 4-7/16 5-7/8 1500 2250 4
1-1/2 1.900 .148 x 5 2 – 1/2 x 6-3/4 11/32 x 5/8 4-3/4 5-7/8 1500 2250 5
2.375 .154 x 4 2 – 1/2 x 6-1/2 3/8 x 3/4 5-3/8 5-1/4 4.5
2 2.375 .154 x 5 2 – 5/8 x 8-1/4 1/2 x 29/32 6 6-5/8 1500 2250 7
2 2.375 .154 x 7 3 – 5/8 x 8-1/4 1/2 x 29/32 6-1/4 7 1500 2250 10
2 2.375 .154 x 7 3 – 5/8 x 10-3/4 1/2 x 29/32 6-1/4 9 1500 2250 13
2 2.875 .203 x 5 3 – 5/8 x 8-1/4 1/2 x 29/32 7 7 1500 2250 13
3.000 .203 x 4 2 – 1/2 x 6 3/8 x 7/8 6 5-1/2 6.5
3 3.500 .156 x 4 3 – 1/2 x 6 3/8 x 7/8 6-1/2 5-1/4 7
3 3.500 .156 x 5 4 – 5/8 x 8-1/4 1/2 x 29/32 7-3/8 7 1100 1650 13.5
3 3.500 .156 x 7 4 – 5/8 x 10-3/4 1/2 x 29/32 7-5/8 9 1100 1650 17.5
3-1/2 4.000 .134 x 4 3 – 1/2 x 6 3/8 x 7/8 7 5-1/4 7.5
3-1/2 4.000 .203 x 5 4 – 5/8 x 8-1/4 1/2 x 29/32 7-3/4 7 1500 2250 17
4 4.500 .188 x 4 3 – 1/2 x 6 3/8 x 7/8 7-1/2 5-1/4 8
4 4.500 .188 x 5 4 – 5/8 x 8-1/4 1/2 x 29/32 8-3/4 7 1300 1950 16.8
4 4.500 .188 x 7 4 – 5/8 x 10-3/4 1/2 x 29/32 8-1/4 9 1300 1950 23.5
5.500 3/16 x 4 4 – 1/2 x 6 3/8 x 7/8 8-1/2 5-1/4 10
5.500 1/4 x 5 4 – 5/8 x 8-1/4 1/2 x 29/32 8-1/2 5-1/4 1205 1808 23.5
5.563 3/16 x 4 4 – 1/2 x 6 3/8 x 7/8 8-1/2 5-1/4 20
5 5.563 1/4 x 5 4 – 5/8 x 8-1/4 1/2 x 29/32 9-5/8 6-3/4 1205 1808 23.5
5 5.563 1/4 x 7 4 – 5/8 x 10-3/4 1/2 x 29/32 9-5/8 8-3/4 1205 1808 25
6.000 1/4 x 4 4 – 1/2 x 6 3/8 x 7/8 9 5-1/4 11
6.000 1/4 x 5 6 – 5/8 x 8-1/4 1/2 x 1 9-7/8 6-7/8 1126 1689 26.5
6 6.625 3/16 x 4 4 – 1/2x 6 3/8 x 7/8 9-5/8 5-1/4 22.5
6 6.625 1/4 x 5 6 – 5/8 x 8-1/4 1/2 x 1 10-1/2 6-7/8 1029 1544 25.5
6 6.625 1/4 x 7 6 – 5/8 x 10-3/4 1/2 x 1 10-1/2 8-7/8 1029 1544 31
8.000 3/16 x 4 5 – 1/2 x 6 3/8 x 7/8 11 5-1/4 15
8.000 1/4 x 5 6 – 5/8 x 8-1/4 1/2 x 1 11-7/8 6-7/8 866 1299 31
8 8.625 3/16 x 4 6 – 1/2 x 6 3/8 x 7/8 11-5/8 5-1/4 16
8 8.625 1/4 x 5 6 – 5/8 x 8-1/4 1/2 x 1-1/16 12-7/16 6-7/8 807 1211 32
8 8.625 1/4 x 7 6 – 5/8 x 10-3/4 1/2 x 1-1/16 12-7/16 8-7/8 807 1211 38
10.000 1/4 x 5 8 – 5/8 x 8-1/4 1/2 x 1 13-7/8 6-7/8 703 1055 39
10 10.750 1/4 x 5 8 – 5/8 x 8-1/4 1/2 x 1-1/16 14-5/8 6-7/8 657 986 40
10 10.750 1/4 x 7 8 – 5/8 x 10-3/4 1/2 x 1-1/16 14-5/8 8-7/8 657 986 49
10 10.750 3/8 x 7 8 – 5/8 x 10-3/4 1/2 x 1-3/16 14-5/8 8-7/8 813 1220 53
12.000 1/4 x 7 8 – 5/8 x 10-3/4 1/2 x 1 16-1/8 8-7/8 591 887 53
12 12.750 1/4 x 5 8 – 5/8 x 8-1/4 1/2 x 1-1/16 16-3/4 6-7/8 558 837 45
12 12.750 1/4 x 7 8 – 5/8 x 10-3/4 1/2 x 1-1/16 16-3/4 8-7/8 558 837 56
12 12.750 3/8 x 7 8 – 5/8 x 10-3/4 1/2 x 1-3/16 16-3/4 8-7/8 691 1036 65
14.000 1/4 x 7 8 – 5/8 x 10-3/4 18 9-1/8 510 765 60
14.000 3/8 x 7 8 – 5/8 x 10-3/4 18 9-1/8 633 949 72

Full range of Dresser couplings available from: Phone: 1-732-390-9393


Alma Impex, Inc. Fax: 1-732-390-9440
4000 Bordentown Ave., Suite 15 E-mail: info@almaimpex.com
Sayreville, NJ 08872 www.almaimpex.com
For other products available from Alma Impex, see our ad in the Advertising Section.
Straub 396 5/2/06 9:58 PM Page 1

402-06

STRAUB COUPLINGS
FLEX / OPEN-FLEX PIPE COUPLINGS WITHOUT AXIAL RESTRAINT FOR ALL PIPE MATERIALS
Temp. Range: Long-term -20°C up to +80°C (-4°F up to +212°F)
Higher temperature for a short period of time allowed
Material:
Casing Type L, LS and LU in stainless steel DIN 1.4301 (AISI 316)
Type H and XS carbon steel hot-dip galvanized
Sealing Sleeve Synthetic rubber to suit application:
EPDM (Ethylene-Propylene) for all qualities of water,
waste water, air, solids and chemical products (chemical
resistance on request).
NBR (Nitrile-Butadiene) for gas, oil, fuel and other
FLEX COUPLING OPEN-FLEX COUPLING
hydrocarbons.
Lock Parts Available in stainless steel or galvanized. Type 1L, 2L, 2LS,
and 2LU are available in stainless steel at additional cost.
Steel Strip Insert: Strip inserts protect the sealing sleeve against mechanical
Type L, LS or chemical damage in the pipe end area. They are required
OD

when the distance between pipe ends is excessive or with


axial movement (expansion, contraction) combined with
angular deflection, axial misalignment, vacuum/depression
(suction line), fuel and combustibles that may cause swelling.
The installation can be pre-fitted for all pipe coupling types.
Selection of insert material to be dictated by the medium.
“T” type inserts also available for special applications.
Important Application Information: Steel strip inserts should be ordered separately.

• These couplings are not designed to accommodate shear Fitting Tool: Fitting pliers and tensioning strap are available from
loading, or rotational (torsional) pipe movement. The distributor.
weight of the pipe and contents must be supported. FLEX 2 & OPEN-FLEX 2
• The correct use of a torque wrench is required for a safe Working Pressure (psi/bar)
IPS Pipe Pipe O.D.
and proper installation. Couplings must be torqued to the Size (in.) (in. / mm) 2LS 2LU 2H 2XS
specified value as printed on each individual coupling.
8 8.625 / 219.1 133 / 9.2 290 / 20.0
Failure to do so can result in injury or death.
10 10.75 / 273.1 107 / 7.4 279 / 19.2
12 12.75 / 323.9 136 / 9.4 236 / 16.3 290 / 20.0 290 / 20.0
TO ORDER, SPECIFY THE FOLLOWING:
14 14.00 / 355.6 125 / 8.6 215 / 14.8 290 / 20.0 290 / 20.0
1) Type: Grip-L, Metal-Grip, Flex (casing type) or Open-Flex (casing type) 16 16.00 / 406.4 110 / 7.6 188 / 13.0 290 / 20.0 290 / 20.0
2) Outside diameter of pipe 18 18.00 / 457.2 96 / 6.6 167 / 11.5 277 / 19.1 290 / 20.0
3) Lock Parts: Stainless steel or galvanized
20 20.00 / 508.0 88 / 6.1 151 / 10.4 252 / 17.4 290 / 20.0
4) Gasket Material: EPDM, Nitrile or Vitone
24 24.00 / 609.6 100 / 6.9 145 / 10.0 210 / 14.5 290 / 20.0
5) Optional Strip Insert: SSI, PVDF or T
FLEX 1L & OPEN-FLEX 1
Maximum Distance
FLEX-1L FLEX-1L OPEN-FLEX 1 OPEN-FLEX 1 Agency Approved Coupling Between Pipe Ends Approx.
Nominal Actual Working Dimensions (Rmax.) Weight
Lock Parts Lock Parts Lock Parts Lock Parts
IPS Pipe OD Galvanized Stainless Galvanized Stainless Pressure (in./mm) With Without Each
(inches) (in./mm) Strip Insert
EDPM NBR EDPM NBR EDPM NBR EDPM NBR psi/bar B C in./mm in./mm lbs./kg
1-1/2 1.900 / 48.3 30001 30003 30000 30002 35001 35003 35000 35002 232 / 16.0 3.0 / 76 1.8 / 46 0.2 / 5 0.6 / 15 1.1 / 0.5
2 2.375 / 60.3 30151 30153 30150 30152 35151 35153 35150 35152 232 / 16.0 3.0 / 76 1.8 / 46 0.2 / 5 0.6 / 15 1.3 / 0.6
2-1/2 2.875 / 73.0 30201 30203 30200 30202 35201 35203 35200 35202 232 / 16.0 3.0 / 76 1.8 / 46 0.2 / 5 0.6 / 15 1.76 / 0.8
3 3.500 / 88.9 30351 30353 30350 30352 35351 35353 35350 35352 232 / 16.0 3.7 / 94 2.0 / 51 0.2 / 5 1.0 / 25 2.1 / 1.0
4 4.500 / 114.3 30651 30653 30650 30652 35651 35653 35650 35652 232 / 16.0 3.7 / 94 2.0 / 51 0.2 / 5 1.0 / 25 2.3 / 1.1
5 5.500 / 139.7 30851 30853 30850 30852 35851 35853 35850 35852 232 / 16.0 4.2 / 107 2.4 / 61 0.2 / 5 1.4 / 35 3.1 / 1.4
6 6.625 / 168.3 31051 31053 31050 31052 36051 36053 36050 36052 232 / 16.0 4.2 / 107 2.4 / 61 0.2 / 5 1.4 / 35 3.7 / 1.7

Straub Werke AG Straub Couplings


Straubstrasse 13 Other Sizes c/o Interwest Sales, Inc.
CH-7323 Wangs Available P.O. Box 506
Switzerland National City, CA 91951-0506
Phone: 41-81-725-41-00 www.straub.ch Phone: 619-336-0400
Fax: 41-81-725-41-01 Fax: 619-336-0440
straub@straub.ch Distributors around the world – See our page in the Advertising Section info@interwestsales.com
397 5/2/06 9:59 PM Page 1

403-06

STRAUB COUPLINGS
PULL-OUT RESISTANT PIPE COUPLINGS FOR ALL METAL PIPES UP TO 16 BAR
Temperature Range: EPDM sealing sleeve -20°C up to +80°C
NBR sealing sleeve -20°C up to +80°C
Material:
Casing Stainless Steel DIN 1.4301 (AISI 316)
Internal Components Stainless Steel

OD
Sealing Sleeve Synthetic rubber to suit application:
EPDM (Ethylene-Propylene) for all
qualities of water, waste water, air,
solids and chemical products
(chemical resistance on request) GRIP-L COUPLING

NBR (Nitrile-Butadiene) for gas, oil, water, fuel and other hydrocarbons.
Locking Parts Stainless Steel;
GRIP-L Ø 26.9 - 60.3 mm with one locking bolt, Ø 76.1 - 609.6 mm with two locking bolts
Steel Strip Insert: Required when gap between pipe ends is excessive, in presence of swelling, vacuum/depression (suction line), or external
pressure. (Must be ordered separately.)
Agency Approved Coupling Maximum Distance Approx.
Lock Parts Lock Parts
Nominal Actual Working Dimensions Between Pipe Ends (Rmax.) Weight
Galvanized Stainless (in./mm)
IPS Pipe OD Pressure* (in./mm) Each
(inches) (mm) Without With
EDPM NBR EDPM NBR psi/bar B C lbs./kg
Strip Insert Strip Insert
GRIP-L COUPLINGS
3/4 26.9 20000 20001 232 / 16.0 1.8 / 46 0.7 / 18 0.2 / 5 0.4 / 10 0.4 / 0.2
1 33.7 20100 20101 232 / 16.0 1.8 / 46 0.7 / 18 0.2 / 5 0.4 / 10 0.4 / 0.2
1-1/4 42.4 20200 20201 232 / 16.0 2.4 / 61 1.0 / 25 0.2 / 5 0.4 / 10 0.8 / 0/4
1-1/2 48.3 20300 20301 232 / 16.0 2.4 / 61 1.0 / 25 0.2 / 5 0.4 / 10 0.9 / 0.4
2 60.3 20450 20451 232 / 16.0 3 / 76 1.5 / 38 0.4 / 10 0.6 / 15 1.2 / 0.5
2-1/2 73.0 20500 20501 232 / 16.0 3.7 / 94 1.6 / 41 0.4 / 10 0.6 / 15 2.7 / 1.2
3 88.9 20650 20651 232 / 16.0 3.7 / 94 1.6 / 41 0.4 / 10 1.0 / 25 1.2 / 0.5
3-1/2 101.6 20750 20751 232 / 16.0 3.7 / 94 1.4 / 36 0.6 / 15 0.6 / 15 1.5 / 0.7
4 114.3 20900 20901 232 / 16.0 3.7 / 94 1.6 / 41 0.4 / 10 1.0 / 25 3.2 / 1.5
5 139.7 21150 21151 232 / 16.0 4.3 / 109 2.1 / 53 0.4 / 10 1.4 / 36 5.7 / 2.6
6 168.3 21350 21351 188 / 13.0 4.3 / 109 2.1 / 53 0.4 / 10 1.4 / 36 6.4 / 2.9
8 219.1 21400 21401 145 / 10.0 5.6 / 142 3.1 / 79 0.4 / 10 1.4 / 36 13.0 / 5.9
10 273.0 25201 25203 25200 25202 67 / 4.6 5.5 / 140 3.1 / 79 0.4 / 10 1.4 / 36 5.8 / 2.6
12 323.9 25301 25303 25300 25302 52 / 3.6 5.5 / 140 3.1 / 79 0.4 / 10 1.4 / 36 6.5 / 3.0
METAL-GRIP COUPLINGS
1 33.7 86 123 124 125 232 / 16.0 2.6 / 66 0.7 / 18 0.2 / 5 0.6 / 15 0.7 / 0.3
1-1/4 42.4 11045 11047 11041 11046 232 / 16.0 2.4 / 61 0.8 / 20 0.2 / 5 0.6 / 15 1.1 / 0.5
1-1/2 48.3 11048 11050 11042 11049 232 / 16.0 2.4 / 61 0.8 / 20 0.2 / 5 0.6 / 15 1.1 / 0.5
2 60.3 11054 11056 11044 11055 232 / 16.0 3 / 76 1.5 / 38 0.4 / 10 1.0 / 25 1.7 / 0.8
3 88.9 135 157 118 195 232 / 16.0 3.7 / 94 1.5 / 38 0.4 / 10 1.0 / 25 3.2 / 1.5
4 114.3 138 160 177 199 232 / 16.0 3.7 / 94 1.5 / 38 0.4 / 10 1.0 / 25 3.8 / 1.7
5 139.7 141 163 180 202 232 / 16.0 4.3 / 109 1.7 / 43 0.6 / 15 1.4 / 36 7.8 / 3.5
6 168.3 144 166 183 205 232 / 16.0 4.3 / 109 1.7 / 43 0.6 / 15 1.4 / 36 8.8 / 4.0
8 219.1 145 167 184 206 232 / 16.0 5.9 / 150 2.4 / 61 0.6 / 15 1.4 / 36 20.6 / 9.4
10 273.0 1567 1568 174 / 12.0 5.8 / 147 2.6 / 66 0.6 / 15 1.4 / 36 33.5 / 15.2
12 323.9 1576 1577 145 / 10.0 5.8 / 147 2.6 / 66 0.6 / 15 1.4 / 36 17.2 / 7.8
14 355.6 1579 1699 116 / 8.0 5.8 / 147 2.6 / 66 0.6 / 15 1.4 / 36 40.3 / 18.3
16 406.4 1580 1581 116 / 8.0 5.8 / 147 2.6 / 66 0.6 / 15 1.4 / 36 24.7 / 11.2
*Agency approved pressures are for applications that require authorization of Classification Societies, such as Marine Approval Bodies.

Straub Werke AG Straub Couplings


Straubstrasse 13 Other Sizes c/o Interwest Sales, Inc.
CH-7323 Wangs Available P.O. Box 506
Switzerland National City, CA 91951-0506
Phone: 41-81-725-41-00 www.straub.ch Phone: 619-336-0400
Fax: 41-81-725-41-01 Fax: 619-336-0440
straub@straub.ch Distributors around the world – See our page in the Advertising Section info@interwestsales.com
398 5/2/06 8:18 PM Page 402

404-06

FARMER'S COPPER LTD.


COPPER/NICKEL COPPER/NICKEL
HOT ROLLED SHEET & PLATE ROUND
Alloy 706 90/10 Alloy 715 70/30 Alloy 706 Alloy 715
ASME-SB-171 ASME-SB-171 ASTM-B-151 ASTM-B-151
ASTM-B-171 ASTM-B-171 ASME-SB-151 ASME-SB-151
MIL-C-15726E & F MIL-C-15726E & F MIL-C-15726E & F MIL-C-15726E & F
UNS-C70600 UNS-C71500 UNS-C70600 UNS-C71500

Thickness Size Weight (lbs.) Thickness Size Weight (lbs.) Size Weight (lbs.) Weight (lbs.) Size Weight (lbs.) Weight (lbs.)
Inches Inches Per Sheet Inches Inches Per Sheet Inches Per Foot Per Length Inches Per Foot Per Length
1/16 36x120 89.3 1/16 36x120 89.3 3/16 .1077 1.29 1/32 .297 3.56
1/8 48x120 232.5 1/8 48x120 232.5 1/4 .190 2.28 3/8 .428 5.13
3/16 48x120 348.8 3/16 48x120 348.8 3/8 .428 5.13 1/2 .761 9.13
3/16 60x120 436.0 3/16 60x120 436.0 1/2 .761 9.13 5/8 1.19 14.28
1/4 48x120 465.1 5/8 1.19 14.28 3/4 1.71 20.52
1/4 48x120 465.1
1/4 60x120 581.4 3/4 1.71 20.52 1 3.04 36.48
1/4 60x120 581.4
1/4 72x144 837.2 7/8 2.33 27.96 1-1/4 4.76 57.12
3/8 48x120 697.7
3/8 48x120 697.7 1 3.04 36.48 1-1/2 6.85 82.20
3/8 60x120 872.1 3/8 60x120 872.1 1-1/8 3. 85 46.20 1-3/4 9.32 111.84
3/8 96x168 1953.8 1/2 48x120 931.2 1-1/4 4.76 57.12 2 12.21 146.40
1/2 48x120 931.2 1/2 60x120 1162.8 1-3/8 5.76 93.12 2-1/4 15.4 184.80
1/2 60x120 1162.8 3/4 48x120 1395.3 1-1/2 6.85 82.20 2-1/2 19.0 228.0
1/2 96x168 2604.6 3/4 60x120 1744.2 1-5/8 8.0 96.0 2-3/4 23.0 276.0
5/8 48x120 1162.8 5/8 60x120 1453.5 1-3/4 9.32 11.84 3 27.4 328.8
5/8 60x120 1453.5 1 60x120 2325.6 2 12.2 146.40 3-1/4 32.2 386.40
5/8 96x168 3255.8 2-1/4 15.4 184.80 3-1/2 37.3 447.60
1-1/4 48x120 2325.6
5/8 99x190 3797.3 2-1/2 19.0 228.0 4 48.7 584.40
1-1/2 48x120 2790.72
3/4 48x120 1395.3 3 27.4 328.80 4-1/2 61.6 739.20
1-1/2 60x120 3488.4
3/4 60x120 1744.2 3-1/2 37.3 447.60 5* 76.1 913.20
1 48x120 1860.4 2 48x120 3721.0 4 48.7 584.40 5-1/8* 79.96 959.52
1 60x120 2325.6 2 60x120 4651.2 4-1/4* 55.36 664.32 5-1/4* 83.91 1,006.9
1-1/8 60x120 2616.3 2-1/2 48x120 4651.2 4-1/2* 61.6 739.20 6* 110 1,320.0
1-1/4 48x120 2325.6 5* 76.1 913.20 6-1/8* 114.21 1,370.5
1-1/4 60x120 2907.0 6* 110.0 1,320.0 8* 195 2,340.0
1-1/2 48x120 2790.7 8* 195.0 2,340.0 10* 304.42 3,653.0
1-1/2 60x120 3488.4 9* 248.0 2,976.0 12’ Lengths 060 Soft
1-3/4 48x120 3255.8 12’ Lengths 060 Soft *Supplied in 6' random lengths.
2 48x120 3720.9 *Supplied in 6' random lengths.
2-1/4 48x120 4186.0
2-1/2 48x120 4651.2
3 48x96 4465.1

Houston Tel: (281) 480-7764


e-mail: sales@farmers-copper.com MARINE
Internet: www.farmerscopper.com DOG BOLTS
202 37th Street (P.O. Box 2649), Galveston, TX 77550 (77553) IN STOCK
Tel: (800) 231-9450 • Fax: (409) 765-7115
399 5/2/06 8:20 PM Page 403

405-06

FARMER'S COPPER LTD.


ROUNDS
12 Ft. Lengths
or cut to your specifications
ALLOY 102

ALLOY 110

ALLOY 145

ALLOY 172

ALLOY 182

ALLOY 360

ALLOY 464

ALLOY 614

ALLOY 624

ALLOY 630

ALLOY 655

ALLOY 706

ALLOY 715

ALLOY 102

ALLOY 110

ALLOY 145

ALLOY 172

ALLOY 182

ALLOY 360

ALLOY 464

ALLOY 614

ALLOY 624

ALLOY 630

ALLOY 655

ALLOY 706

ALLOY 715
RWMA CLASS II

RWMA CLASS II
1018 CR.

1018 CR.
ASTM-B-187

ASTM-B-187

ASTM-B-124

ASTM-B-196

ASTM-B-150

ASTM-B-150

ASTM-B-150

ASTM-B-151

ASTM-B-151

ASTM-B-187

ASTM-B-187

ASTM-B-124

ASTM-B-196

ASTM-B-150

ASTM-B-150

ASTM-B-150

ASTM-B-151

ASTM-B-151
ASTM-B-16

ASTM-B-21

ASTM-B-16

ASTM-B-21
AMS 4640

AMS 4640
ROUNDS ROUNDS

.016 ✔ 1.750 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.0937 ✔ 1.875 ✔ ✔ ✔
.125 ✔ ✔ ✔ 2.00 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.1562 ✔ 2.125 ✔ ✔ ✔ ✔
.1875 ✔ ✔ ✔ ✔ 2.250 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.2187 ✔ 2.375 ✔ ✔
.250 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 2.50 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.2812 ✔ 2.625 ✔ ✔ ✔
.3125 ✔ ✔ ✔ ✔ ✔ 2.750 ✔ ✔ ✔ ✔ ✔
.3437 ✔ 2.875 ✔ ✔
.375 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3.00 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.4375 ✔ ✔ ✔ ✔ 3.125 ✔ ✔
.4687 ✔ 3.250 ✔ ✔ ✔ ✔ ✔
.500 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3.500 ✔ ✔ ✔ ✔ ✔
.5313 ✔ 3.625 ✔ ✔ ✔
.5625 ✔ ✔ ✔ ✔ ✔ 3.750 ✔ ✔ ✔
.625 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 4.00 ✔ ✔ ✔ ✔ ✔
.6875 ✔ ✔ ✔ 4.250 ✔
.750 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 4.50 ✔ ✔ ✔ ✔ ✔ ✔
.8125 ✔ ✔ ✔ 5.00 ✔ ✔ ✔
.875 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 5.25 ✔
.9375 ✔ 5.50 ✔
1.00 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 6.00 ✔ ✔ ✔
1.0625 ✔ 7.00 ✔ ✔
1.125 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 8.00 ✔
1.250 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 9.00 ✔
1.3125 ✔
1.375 ✔ ✔ ✔ ✔ ✔ ✔
1.4375 ✔
1.50 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
1.625 ✔ ✔ ✔
1.6875 ✔ ✔
FREE CUTTING BRASS

FREE CUTTING BRASS

FREE CUTTING BRASS

FREE CUTTING BRASS

FREE CUTTING BRASS

FREE CUTTING BRASS


NAVAL BRASS

NAVAL BRASS

NAVAL BRASS
ALLOY 464

ALLOY 360

ALLOY 360

ALLOY 464

ALLOY 360

ALLOY 360

ALLOY 464

ALLOY 360

ALLOY 360
SQUARE

SQUARE

SQUARE
ASTM-B-21

ASTM-B-16

ASTM-B-16

ASTM-B-21

ASTM-B-16

ASTM-B-16

ASTM-B-21

ASTM-B-16

ASTM-B-16
HEX HEX HEX
HEX

HEX

HEX

HEX

HEX

HEX

SQUARE SQUARE SQUARE

HEX
3/16 ✔ ✔ .8125 ✔ 1-3/4 ✔ ✔ ✔
1/4 ✔ ✔ ✔ 7/8 ✔ ✔ 1-7/8 ✔ ✔
5/16 ✔ ✔ 1 ✔ ✔ 2 ✔ ✔ ✔
3/8 ✔ ✔ ✔ 1-1/16 ✔ 2-1/8
7/16 ✔ 1-1/8 ✔ ✔ 2-1/4 ✔ ✔ ✔
1/2 ✔ ✔ ✔ 1-3/16 ✔ 2-1/2 ✔ ✔ ✔
9/16 ✔ 1-1/4 ✔ ✔ ✔ 2-3/4
SQUARE 5/8 ✔ ✔ ✔ 1-3/8 ✔ ✔ 3 ✔ ✔ ✔
12 Ft. Lengths 11/16 ✔ 1-1/2 ✔ ✔ ✔ 3-1/2 ✔ ✔
or cut to your specifications 3/4 ✔ ✔ ✔ 1-5/8 ✔ ✔

?? ?
Having trouble finding THE PRODUCTS

???
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
ON THIS PAGE? We can help!
E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
400 5/2/06 8:21 PM Page 404

406-06

FARMER'S COPPER LTD.

COPPER NICKEL THREADED FITTINGS

90° ELBOW TEE CROSS 45° ELBOW


COUPLING
3000 #
Center to Center
Nominal End Elbows to Outside Minimum End to End to End Wall Length of
Pipe Tees, End Diameter Wall End End Outside Thickness Thread
Size Crosses 45° Elbow of Band Thickness Couplings Caps Diameter Min. Min.
A C H G W P D G B L2
1/8 0.81 0.69 0.88 0.125 1.25 0.75 0.62 0.19 0.25 0.2639
1/4 0.97 0.75 1.00 0.130 1.38 1.00 0.75 0.19 0.32 0.4018
3/8 1.12 0.88 1.31 0.138 1.50 1.00 0.88 0.19 0.36 0.4078 HALF-COUPLING
1/2 1.31 1.00 1.50 0.161 1.88 1.25 1.12 0.25 0.43 0.5337
3/4 1.50 1.12 1.81 0.170 2.00 1.44 1.38 0.25 0.50 0.5457
1 1.75 1.31 2.19 0.196 2.38 1.62 1.75 0.38 0.58 0.6828
1-1/4 2.00 1.38 2.44 0.208 2.62 1.75 2.25 0.38 0.67 0.7068
1-1/2 2.38 1.69 2.97 0.219 3.12 1.75 2.50 0.44 0.70 0.7235
2 2.50 1.72 3.31 0.281 3.38 1.88 3.00 0.50 0.75 0.7565
2-1/2 3.25 2.06 4.00 0.301 3.62 2.38 3.62 0.62 0.93 1.138
3 3.75 2.50 4.75 0.348 4.25 2.56 4.25 0.75 1.02 1.200
4 4.50 3.12 6.00 0.440 4.75 2.69 5.50 0.88 1.09 1.300
Fitting Dimensions are in accordance with ASME-B-16.11 CAP

CLASS 3000
COPPER NICKEL Nominal
Pipe
Pipe
End Wall
Water
Way
Male
Flange Nut
Threads
Per Inch
Length Clear
Bearing Assembly Assembly
THREADED UNIONS Size Min.
A
Min.
C
Bore
D
Min.
F
Min.
G
Max.
H
Min. Nominal
J L
Nut
N
0.269
1/8 0.58 0.095 0.125 0.125 16 0.049 1.63 2.0
0.253
0.388
1/4 0.75 0.119 0.125 0.125 16 0.049 1.63 2.0
0.372
0.548
3/8 0.90 0.126 0.135 0.135 14 0.054 1.81 2.2
0.532
0.688
1/2 1.09 0.147 0.145 0.145 14 0.059 1.93 2.3
0.672
0.858
3/4 1.32 0.154 0.160 0.160 11 0.066 2.24 2.6
0.842
1.108
1 1.63 0.179 0.180 0.175 11 0.073 2.44 3.1
1.092
1.408
1-1/4 1.99 0.191 0.210 0.205 11 0.084 2.80 3.7
1.392
1.638
1-1/2 2.25 0.200 0.230 0.220 10 0.091 3.01 4.4
1.622
2.068
2 2.76 0.218 0.260 0.250 10 0.106 3.39 5.2
2.052
2.548
2-1/2 3.36 0.276 0.295 0.280 8 0.121 4.03 5.9
2.532
3.058
3 4.03 0.300 0.325 0.315 8 0.139 4.29 6.9
3.042
Union Dimensions are in accordance with MSS-SP-83

Houston Tel: (281) 480-7764


e-mail: sales@farmers-copper.com MARINE
Internet: www.farmerscopper.com DOG BOLTS
202 37th Street (P.O. Box 2649), Galveston, TX 77550 (77553) IN STOCK
Tel: (800) 231-9450 • Fax: (409) 765-7115
401 5/2/06 8:22 PM Page 405

407-06

FARMER'S COPPER LTD.

COPPER
NICKEL
SOCKET-
WELDING
FITTINGS
90° ELBOW TEE CROSS 45° ELBOW
3000 #
Bore Socket Depth Center to Bottom of Laying Lengths End
Nominal Socket Diameter Wall of Socket – A Wall
Pipe Bore of Thickness Body Socket 90° Elbows, Half Tolerances ± Thickness
Size Diameter Fittings C Wall Min. Tees, and 45° Couplings Couplings Min.
B D Ave. Min. G J Crosses Elbows E F A E F K
1/8 0.440 0.299 0.125 0.125 0.095 0.38 0.44 0.31 0.25 0.62 0.03 0.06 0.03 0.19
COUPLING 0.420 0.239
1/4 0.575 0.394 0.149 0.130 0.119 0.38 0.44 0.31 0.25 0.62 0.03 0.06 0.03 0.19
0.555 0.334
3/8 0.710 0.523 0.158 0.138 0.126 0.38 0.53 0.31 0.25 0.69 0.06 0.12 0.06 0.19
0.690 0.463
1/2 0.875 0.652 0.184 0.161 0.147 0.38 0.62 0.44 0.38 0.88 0.06 0.12 0.06 0.25
0.855 0.592
3/4 1.085 0.854 0.193 0.168 0.154 0.50 0.75 0.50 0.38 0.94 0.06 0.12 0.06 0.25
1.065 0.794
1 1.350 1.079 0.224 0.196 0.179 0.50 0.88 0.56 0.50 1.12 0.08 0.16 0.08 0.38
1.330 1.019
HALF COUPLING 1-1/4 1.695 1.410 0.239 0.208 0.191 0.50 1.06 0.69 0.50 1.19 0.08 0.16 0.08 0.38
1.675 1.350
1-1/2 1.935 1.640 0.250 0.218 0.200 0.50 1.25 0.81 0.50 1.25 0.08 0.16 0.08 0.44
1.915 1.580
2 2.426 2.097 0.273 0.238 0.218 0.62 1.50 1.00 0.75 1.62 0.08 0.16 0.08 0.50
2.406 2.037
2-1/2 2.931 2.529 0.345 0.302 0.276 0.62 1.62 1.12 0.75 1.69 0.10 0.20 0.10 0.62
2.906 2.409
3 3.560 3.128 0.375 0.327 0.300 0.62 2.25 1.25 0.75 1.75 0.10 0.20 0.10 0.75
3.535 3.008
4 4.570 4.086 0.421 0.368 0.337 0.75 2.62 1.62 0.75 1.88 0.10 0.20 0.10 0.88
CAP 4.545 3.966
All units are inches.

CLASS 3000
COPPER NICKEL Nominal PipeSocket Socket Water Male Threads Depth of Length Clear
Pipe End Bore Wall Way Laying Flange Nut Per Inch Bearing Socket Assembly Assembly
SOCKET WELD UNIONS Size Min. Dia. Min. Bore Length Min. Min. Max. Min. Min. Nominal Nut
A B C D E F G H J K L N
1/8 0.86 0.430 0.125 0.269 0.88 0.125 0.125 16 0.049 0.38 1.63 2.0
0.420 0.253 0.75
1/4 0.86 0.565 0.130 0.388 0.88 0.125 0.125 16 0.049 0.38 1.63 2.0
0.555 0.372 0.75
3/8 1.02 0.700 0.138 0.548 1.06 0.135 0.135 14 0.054 0.38 1.81 2.2
0.690 0.532 0.81
1/2 1.23 0.865 0.161 0.688 1.06 0.145 0.145 14 0.059 0.38 1.93 2.3
0.855 0.672 0.81
3/4 1.46 1.075 0.168 0.858 1.25 0.160 0.160 11 0.066 0.50 2.24 2.6
1.065 0.842 1.00
1 1.79 1.340 0.196 1.108 1.35 0.180 0.175 11 0.073 0.50 2.44 3.1
1.330 1.092 1.03
1-1/4 2.16 1.685 0.208 1.408 1.60 0.210 0.205 11 0.084 0.50 2.80 3.7
1.675 1.392 1.28
1-1/2 2.42 1.925 0.218 1.638 1.66 0.230 0.220 10 0.091 0.50 3.01 4.4
1.915 1.622 1.34
2 2.96 2.416 0.238 2.068 1.79 0.260 0.250 10 0.106 0.62 3.39 5.2
2.406 2.052 1.47
2-1/2 3.61 2.921 0.302 2.548 2.43 0.295 0.280 8 0.121 0.62 4.03 5.9
2.906 2.532 2.06
3 4.30 3.550 0.327 3.058 2.51 0.325 0.315 8 0.139 0.62 4.29 6.9
3.535 3.042 2.11
Union Dimensions are in accordance with MSS-SP-83 All units are inches.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
402 5/2/06 8:22 PM Page 406

408-06

FARMER’S COPPER LTD.


WEIGHTS – PIPE
(Shown in pounds per linear foot)
REGULAR – STANDARD – SCHEDULE 40
CDA-230 102/122 Copper 651-655 Bronze
SPS Actual Actual Wall Red Brass and 706 CuNi (Everdur)
Nominal O.D. I.D. Thickness Density .316 Density .323 Density .308
1/8 .405 .281 .062 .2533 .2590 .2469
1/4 .540 .375 .082 .4496 .4596 .4383
3/8 .675 .494 .090 .6302 .6441 .6142
1/2 .840 .625 .107 .9381 .9588 .9143
3/4 1.050 .822 .114 1.2710 1.2990 1.2390
1 1.315 1.062 .126 1.7910 1.8310 1.7460
1-1/4 1.660 1.368 .146 2.6330 2.6920 2.5670
1-1/2 1.900 1.600 .150 3.1270 3.1960 3.0480
2 2.375 2.062 .156 4.1360 4.2280 4.0310
2-1/2 2.875 2.500 .187 6.0030 6.1360 5.8510
3 3.500 3.062 .219 8.5600 8.7500 8.3430
3-1/2 4.000 3.500 .250 11.1700 11.4200 10.8900
4 4.500 4.000 .250 12.6600 12.9400 12.3400
5 5.563 5.062 .250 15.8500 16.2000 15.4500
6 6.625 6.125 .250 18.9900 19.4100 18.5100
8 8.625 8.000 .312 30.9500 31.6300 30.1600
10 10.750 10.019 .365 45.2200 46.2200 44.0700
12 12.750 12.000 .375 55.2800 56.5100 53.8800
EXTRA STRONG – SCHEDULE 80
1/8 .405 .205 .100 .3633 .3714 .3541
1/4 .540 .294 .123 .6110 .6246 .5956
3/8 .675 .421 .127 .8291 .8475 .8081
1/2 .840 .542 .149 1.2270 1.2540 1.1950
3/4 1.050 .736 .157 1.6700 1.7070 1.6280
1 1.315 .951 .182 2.4570 2.5110 2.3940
1-1/4 1.660 1.272 .194 3.3880 3.4630 3.3020
1-1/2 1.900 1.494 .203 4.1040 4.1950 4.0000
2 2.375 1.933 .221 5.6710 5.7970 5.5270
2-1/2 2.875 2.315 .280 8.6560 8.8480 8.4370
3 3.500 2.892 .304 11.5700 11.8300 11.2800
3-1/2 4.000 3.358 .321 14.0700 14.3800 13.7100
4 4.500 3.818 .341 16.9000 17.2700 16.4700
5 5.563 4.813 .375 23.1800 23.6900 22.5900
6 6.625 5.751 .437 32.2100 32.9300 31.4000
8 8.625 7.625 .500 48.4000 49.4700 47.1700
10 10.750 9.750 .500 61.0500 62.4100 59.5100
(Variations from these weights must be expected in practice)

Houston Tel: (281) 480-7764


e-mail: sales@farmers-copper.com MARINE
Internet: www.farmerscopper.com DOG BOLTS
202 37th Street (P.O. Box 2649), Galveston, TX 77550 (77553) IN STOCK
Tel: (800) 231-9450 • Fax: (409) 765-7115
0403-04 5/2/06 8:23 PM Page 1

409-06

Metric Copper Solder Fittings

SOCKET REDUCER UNION – BRONZE


FIG. 5240 Bronze solder union
Copper Solder Reducer ELBOW 90 DEG. ELBOW 45 DEG. Part # Size
FIG. 5090 FIG. 5041 70 046 10 mm
Part # Size 70 047 12 mm
71 079 8 x 6 mm Part # Size Part # Size 70 048 15 mm
71 080 10 x 6 mm 71 067 6 mm 72 300 6 mm 70 049 16 mm
71 081 10 x 8 mm 71 068 8 mm 71 301 8 mm 70 050 18 mm
70 100 12 x 6 mm 71 069 10 mm 71 302 10 mm 70 051 22 mm
71 082 12 x 8 mm 71 070 12 mm 71 303 12 mm 70 052 28 mm
71 083 12 x 10 mm 71 071 14 mm 71 304 14 mm 70 053 35 mm
71 084 14 x 10 mm 71 072 15 mm 71 305 15 mm 70 054 42 mm
71 085 14 x 12 mm 71 073 16 mm 71 306 16 mm
71 086 15 x 10 mm 71 074 18 mm 71 307 18 mm
71 087 15 x 12 mm 71 796 20 mm 71 797 20 mm
71 088 16 x 10 mm 71 075 22 mm 71 308 22 mm
71 089 16 x 12 mm 71 076 28 mm 71 309 28 mm
71 077 35 mm 71 310 35 mm CAPS – FIG. 5301
71 078 42 mm 71 311 42 mm
Copper Solder Cap
Part # Size
Part # Size 70 071 10 mm
71 090 16 x 14 mm 70 072 12 mm
71 091 16 x 15 mm 70 073 14 mm
71 092 18 x 10 mm 70 074 15 mm
71 093 18 x 12 mm 70 075 16 mm
71 094 18 x 14 mm 70 076 18 mm
71 095 18 x 15 mm 70 077 22 mm
71 096 18 x 16 mm 70 078 28 mm
71 101 20 x 12 mm 70 079 35 mm
71 097 22 x 12 mm 70 080 42 mm
71 098 22 x 14 mm
TEE SOCKETS
71 099 22 x 15 mm FIG. 5130 FIG. 5270
71 100 22 x 16 mm
Part # Size Part # Size
70 167 6 mm 72 055 6 mm
70 168 8 mm 72 056 8 mm
70 169 10 mm 72 057 10 mm MALE CONNECTORS
70 170 12 mm 71 058 12 mm Bronze solder connector
70 171 14 mm 71 059 14 mm
with male thread one end.
70 172 15 mm 71 060 15 mm
Part # Size Part # Size
70 173 16 mm 71 061 16 mm
71 101 22 x 18 mm 70 061 10 mm x 1/4"
70 174 18 mm 71 062 18 mm
71 102 28 x 12 mm 70 062 10 mm x 3/8"
70 189 20 mm 71 795 20 mm
71 103 28 x 15 mm 70 063 12 mm x 1/4"
70 175 22 mm 71 063 22 mm
71 104 28 x 18 mm 70 064 12 mm x 3/8"
70 176 28 mm 71 064 28 mm
71 105 28 x 22 mm 70 065 15 mm x 1/2"
70 177 35 mm 71 065 35 mm
71 106 35 x 22 mm 70 066 16 mm x 1/2"
70 178 42 mm 71 066 42 mm
71 107 35 x 28 mm 70 067 18 mm x 1/2"
71 108 42 x 22 mm 70 068 20 mm x 3/4"
71 109 42 x 28 mm 70 069 22 mm x 3/4"
71 110 42 x 35 mm 70 070 28 mm x 1"

28 Paul Dr., San Rafael, CA 94903 METRIC COPPER TUBING


Phone: 415-492-9202 Also Stocking Large
Metric Marine
Fax: 415-492-9206 & Industrial
Inventory of Metric
E-mail: info@metricmarine.com Brass – Steel – Stainless
Web: www.metricmarine.com Compression Fittings
Your Source for European Specialty Tools, Tubing & Fittings
Flagg 404 5/2/06 8:25 PM Page 1

410-06

FLAGG FLOW PRODUCTS


BRONZE FLANGES – Grooved for Brazing Ring
Flanges – Navy Type Flanges – Commercial Type
150 Lbs. W.O.G. at 150° F. 100 Lbs. W.S.P. at 425° F. 150 Lbs. W.S.P. at 450° F. 225 Lbs. W.O.G. at 150° F.

Face Fed Grooved


Faced & Drilled Fig. 5075 Fig. 5175 Face Fed Grooved
Faced Only Fig. 5076 Fig. 5176 Faced & Drilled Fig. 5070 Fig. 5170
Blind Fig. 5077 Faced Only Fig. 5071 Fig. 5171
Blind Fig. 5072
Fig. 5175
Fig. 5170

Pipe Outside Number


Size Diameter of Diameter Weight Pipe Outside Number
Size in of Overall Flange Bolt of Bolt Per 100 Size Diameter of Diameter Weight
Code Inches Flange Height Thickness Holes Holes Circle Pieces Size in of Overall Flange Bolt of Bolt Per 100
040 1/4 3-1/4 7/8 3/8 3 9/16 2-1/8 100 Code Inches Flange Height Thickness Holes Holes Circle Pieces
060 3/8 3-3/8 15/16 3/8 3 9/16 2-1/4 131 040 1/4 3-1/2 3/4 5/16 4 5/8 2-3/8 94
100 1/2 3-9/16 1 3/8 3 9/16 2-7/16 125 060 3/8 3-1/2 7/8 5/16 4 5/8 2-3/8 99
150 3/4 3-13/16 1-1/16 7/16 4 9/16 2-11/16 151 100 1/2 3-1/2 1 5/16 4 5/8 2-3/8 99
200 1 4-1/4 1-1/8 7/16 4 9/16 3-1/8 190 150 3/4 3-7/8 1-1/16 11/32 4 5/8 2-3/4 136
250 1-1/4 4-1/2 1-1/4 7/16 4 9/16 3-3/8 219 200 1 4-1/4 1-5/32 3/8 4 5/8 3-1/8 172
300 1-1/2 5-1/16 1-3/8 7/16 6 9/16 3-15/16 276 250 1-1/4 4-5/8 1-9/32 13/32 4 5/8 3-1/2 230
400 2 5-9/16 1-3/8 7/16 6 9/16 4-7/16 325 300 1-1/2 5 1-7/16 7/16 4 5/8 3-7/8 295
450 2-1/2 6-1/8 1-3/8 1/2 6 9/16 5 441 400 2 6 1-17/32 1/2 4 3/4 4-3/4 430
500 3 6-5/8 1-3/8 1/2 8 9/16 5-1/2 488 450 2-1/2 7 1-25/32 9/16 4 3/4 5-1/2 673
550 3-1/2 7-3/16 1-7/16 1/2 8 9/16 6-1/16 533 500 3 7-1/2 1-27/32 5/8 4 3/4 6 827
600 4 7-11/16 1-7/16 1/2 8 9/16 6-9/16 620 550 3-1/2 8-1/2 1-31/32 11/16 8 3/4 7 1123
615 4-1/2 8-3/16 1-1/2 1/2 10 9/16 7-1/16 680 600 4 9 2-1/8 11/16 8 3/4 7-1/2 1275
650 5 9-1/16 1-9/16 9/16 10 11/16 7-13/16 927 650 5 10 2-5/16 3/4 8 7/8 8-1/2 1660
700 6 10-1/8 1-11/16 9/16 12 11/16 8-7/8 1110 700 6 11 2-15/32 13/16 8 7/8 9-1/2 1980
710 7 11-5/16 1-13/16 9/16 12 11/16 10 1397 750 8 13-1/2 2-11/16 15/16 8 7/8 11-3/4 3137
750 8 12-3/8 2 5/8 14 11/16 11-1/16 1810 800 10 16 3 1 12 1 14-1/4 4550
800 10 15 2-1/4 11/16 15 13/16 13-7/16 2665 820 12 19 3-3/16 1-1/16 12 1 17 6650
820 12 17-5/8 2-1/2 3/4 18 13/16 16-1/16 4125

Flanges – Navy Type Flanges – Butterfly – Navy Type


250 Lbs. W.O.G. at 150° F. 200 Lbs. W.S.P. at 450° F. 225 Lbs. W.O.G. at 150° F.
150 Lbs. W.S.P. at 425° F.
Grooved
Faced & Drilled Fig. 5181
Blind Fig. 5083 Grooved
Fig. 5181
Faced & Drilled Fig. 5188
Pipe Outside Number
Size Diameter of Diameter Weight
Fig. 5188
Size in of Overall Flange Bolt of Bolt Per 100
Code Inches Flange Height Thickness Holes Holes Circle Pieces
040 1/4 3-1/4 1-3/16 11/16 3 9/16 2-1/8 175 Pipe Outside Number
060 3/8 3-3/8 1-1/4 11/16 3 9/16 2-1/4 206 Size Diameter of Diameter Weight
100 1/2 3-9/16 1-5/16 11/16 3 9/16 2-7/16 220 Size in of Overall Flange Bolt of Bolt Per 100
200 1 4-1/4 1-7/16 3/4 4 9/16 3-1/8 320 Code Inches Flange Height Thickness Holes Holes Circle Pieces
250 1-1/4 4-1/2 1-5/8 13/16 4 9/16 3-3/8 390 250 1-1/4 4-5/8 1-9/32 13/32 4 5/8 3-1/2 230
300 1-1/2 5-1/16 1-3/4 13/16 6 9/16 3-15/16 463 300 1-1/2 5 1-7/16 7/16 4 5/8 3-7/8 295
400 2 5-9/16 1-3/4 13/16 6 11/16 4-7/16 537 400 2 6 1-17/32 1/2 4 3/4 4-3/4 430
450 2-1/2 6-1/8 1-13/16 15/16 6 11/16 5 675 450 2-1/2 7 1-25/32 9/16 4 3/4 5-1/2 673
500 3 6-5/8 1-13/16 15/16 8 11/16 5-1/2 725 500 3 7-1/2 1-27/32 5/8 4 3/4 6 827
550 3-1/2 7-3/16 1-15/16 1 8 11/16 6-1/16 920 550 3-1/2 8-1/2 1-31/32 11/16 8 3/4 7 1123
600 4 7-11/16 1-15/16 1 8 11/16 6-9/16 1075 600 4 9 2-1/8 11/16 8 3/4 7-1/2 1275
650 5 9-1/16 2-1/16 1-1/16 10 11/16 7-13/16 1535 650 5 10 2-5/16 3/4 8 7/8 8-1/2 1660
700 6 10-1/8 2-5/16 1-3/16 12 11/16 8-7/8 2075 700 6 11 2-15/32 13/16 8 7/8 9-1/2 1980
750 8 12-3/8 2-11/16 1-5/16 14 11/16 11-1/16 3196 750 8 13-1/2 2-11/16 15/16 8 7/8 11-3/4 3137
760 9 13-15/16 2-7/8 1-3/8 14 13/16 12-3/8 4200 800 10 16 3 1 12 1 14-1/4 4550
800 10 15 3 1-7/16 15 13/16 13-7/16 4780 820 12 19 3-3/16 1-1/16 12 1 17 6650
820 12 17-5/8 3-1/8 1-1/2 18 13/16 16-1/16 6805

SILVER BRAZED FITTINGS • UNIONS • UNION FITTINGS • FLANGES


FLAGG FLOW LEE BRASS
PRODUCTS P.O. Box 1229, Anniston, AL 36202
800-876-1811 • Tel: 256-831-2501 • Fax: 800-876-1800
Flagg 405 5/2/06 8:26 PM Page 1

411-06

CAST BRASS THREADED PIPE FITTINGS AND UNION FITTINGS

90° ELBOWS SIZE PIPE SIZE HEX BUSHINGS SIZE PIPE SIZE STANDARD SIZE PIPE SIZE
CODE IN INCHES CODE IN INCHES UNIONS CODE IN INCHES
040 1/4 039 1/4 x 1/8 125 Lbs. W.S.P. 020 1/8
060 3/8 058 3/8 x 1/8 200 Lbs. non-shock W.O.G.
GROUND JOINT 040 1/4
100 1/2 059 3/8 x 1/4 060 3/8
150 3/4 097 1/2 x 1/8 100 1/2
200 1 098 1/2 x 1/4 150 3/4
250 1-1/4 200 1
099 1/2 x 3/8
300 1-1/2 250 1-1/4
146 3/4 x 1/8
400 2 300 1-1/2
147 3/4 x 1/4
450 2-1/2 400 2
148 3/4 x 3/8
Fig. 4101 500 3
149 3/4 x 1/2
600 4
Fig. 4171 195 1 x 1/8
700 6
196 1 x 1/4 Fig. No. 4401 (Rough)
750 8
197 1 x 3/8
198 1 x 1/2
199 1 x 3/4
90° STREET SIZE PIPE SIZE 246 1-1/4 x 3/8
ELBOWS CODE IN INCHES 247 1-1/4 x 1/2
040 1/4 248 1-1/4 x 3/4 250 LBS. SIZE PIPE SIZE
060 3/8 249 1-1/4 x 1 UNIONS CODE IN INCHES
100 1/2 295 1-1/2 x 3/8
250 Lbs. W.S.P. 020 1/8
150 3/4 296 1-1/2 x 1/2 400 Lbs. non-shock W.O.G.
GROUND JOINT 040 1/4
200 1 297 1-1/2 x 3/4 060 3/8
250 1-1/4 298 1-1/2 x 1 100 1/2
300 1-1/2 299 1-1/2 x 1-1/4 150 3/4
400 2 393 2 x 1/4 200 1
500 3
395 2 x 1/2 250 1-1/4
Fig. 4103 396 2 x 3/4 300 1-1/2
397 2x1 400 2
398 2 x 1-1/4 450 2-1/2
399 2 x 1-1/2 500 3
446 2-1/2 x 1
45° ELBOWS SIZE PIPE SIZE 447 2 -1/2 x 1-1/4 Fig. No. 4421 (Rough)
CODE IN INCHES 449 2 -1/2 x 2
040 1/4 495 3x1
060 3/8 496 3 x 1-1/4
100 1/2 497 3 x 1-1/2
150 3/4 498 3x2
200 1 499 3 x 2-1/2
250 1-1/4 549 3-1/2 x 3
300 1-1/2
400 2 250 LBS. 90° SIZE PIPE SIZE
450 2-1/2 UNION ELBOWS CODE IN INCHES
Fig. 4102
500 3 250 Lbs. W.S.P. 060 3/8
600 4 400 Lbs. non-shock W.O.G.
GROUND JOINT 100 1/2
CROSSES SIZE PIPE SIZE 150 3/4
CODE IN INCHES 200 1
040 1/4 300 1-1/2
TEES SIZE PIPE SIZE 400 2
CODE IN INCHES 060 3/8
100 1/2
040 1/4 150 3/4
060 3/8 200 1
100 1/2 250 1-1/4
150 3/4 300 1-1/2
200 1 400 2
250 1-1/4 450 2-1/2 Fig. No. 4408 (Rough)
300 1-1/2 Fig. 4135 500 3
400 2 600 4
450 2-1/2
500 3
Fig. 4121 600 4
700 6

STANDARD SIZE PIPE SIZE BOLT SIZE


COUPLINGS SIZE PIPE SIZE FLANGE UNIONS CODE IN INCHES IN INCHES
CAPS SIZE PIPE SIZE CODE IN INCHES 150 Lbs. W.S.P.
CODE IN INCHES 100 1/2 7/16
040 1/4 150 3/4 7/16
040 1/4 060 3/8 200 1 7/16
060 3/8 100 1/2 250 1-1/4 7/16
100 1/2 150 3/4
150 3/4 300 1-1/2 1/2
200 1
200 1 400 2 1/2
250 1-1/4
250 1-1/4 450 2-1/2 5/8
300 1-1/2
300 1-1/2 500 3 5/8
400 2
400 2 450 2-1/2 600 4 5/8
450 2-1/2 Fig. 4140 500 3 700 6 3/4
Fig. 4145 Fig. 4164
600 4 600 4
700 6

Energy Marine – San Diego, CA • 619-338-0837 Valve Automation & Controls – Chula Vista, CA • Ph 619-656-7420
Ferguson – Seattle, WA • 206-767-7700 W & O Supply – Jacksonville, FL • Ph 904-354-3800
Gulf Coast Marine Sup. Co. – Pascagoula, MS • Ph 228-762-9282
Monarch Supply Co. – Chesapeake, VA • Ph 757-487-1700
REDUCING SIZES AVAILABLE FOR
Sunbelt Supply – Luling, LA • Ph 985-785-0007
Sunbelt Supply – Virginia Beach, VA • Ph 757-318-9108 Flagg Flow Products ELBOWS, TEES AND COUPLINGS
Flagg 406 5/2/06 8:27 PM Page 1

412-06

FLAGG FLOW PRODUCTS


BRONZE PIPE FITTINGS FOR BRAZED JOINTS
6" and Smaller 200 Lbs. W.S.P. at 425°F — 400 Lbs. W.O.G. at 150°F
Over 6" 150 Lbs. W.S.P. at 425°F — 250 Lbs. W.O.G. at 150°F
FF—Female Brazed; FEM (FTH)—Female IPS Threaded; Male FF—Male Brazed; Male TH (MTH)—Male IPS Threaded
• Type A fittings have a streamlined interior which is designed to reduce turbulence.

90° ELBOWS SIZE PIPE SIZE 45° ELBOWS SIZE PIPE SIZE REDUCING TEES SIZE PIPE SIZE
CODE IN INCHES CODE IN INCHES CODE IN INCHES
020 1/8 040 • 1/4 054 • 3/8 x 1/4 x 1/4
040 • 1/4 060 • 3/8 055 3/8 x 1/4 x 3/8
060 • 3/8 100 • 1/2 059 • 3/8 x 3/8 x 1/4
100 • 1/2 150 • 3/4 061 • 3/8 x 3/8 x 1/2
150 • 3/4 200 • 1 078 • 1/2 x 1/4 x 1/4
200 • 1 250 • 1-1/4 080 • 1/2 x 1/4 x 1/2
250 • 1-1/4 300 • 1-1/2 089 • 1/2 x 3/8 x 3/8
300 • 1-1/2 400 • 2 090 1/2 x 3/8 x 1/2
400 • 2 450 • 2-1/2 098 • 1/2 x 1/2 x 1/4
450 • 2-1/2 500 • 3 099 • 1/2 x 1/2 x 3/8
Face- 500 • 3 Face- 550 • 3-1/2 101 • 1/2 x 1/2 x 3/4
Fed Grooved 550 • 3-1/2 Fed Grooved 600 • 4 102 1/2 x 1/2 x 1
Face-
FFxFF Fig. 5001 5101 600 • 4 FFxFF Fig. 5004 5104 650 • 5 Fed Grooved 120 3/4 x 1/4 x 3/4
FFxFEM Fig. 5002 5102 650 • 5 700 • 6 FFxFFxFF Fig. 5021 5121 128 • 3/4 x 3/8 x 3/8
700 • 6 750 • 8 FFxFEMxFF Fig. 5022 5122 130 • 3/4 x 3/8 x 3/4
FFxFFxFEM Fig. 5023 5123
750 • 8 800 • 10 138 3/4 x 1/2 x 3/8
800 • 10 820 • 12 139 • 3/4 x 1/2 x 1/2
820 • 12 140 • 3/4 x 1/2 x 3/4
45° STREET SIZE PIPE SIZE 147 • 3/4 x 3/4 x 1/4
90° REDUCING SIZE PIPE SIZE
ELBOWS CODE IN INCHES 148 • 3/4 x 3/4 x 3/8
ELBOWS CODE IN INCHES 150 3/4 149 • 3/4 x 3/4 x 1/2
300 1-1/2 151 • 3/4 x 3/4 x 1
039 1/4 x 1/8 165 1 x 1/4 x 1
059 • 3/8 x 1/4 170 • 1 x 3/8 x 1
098 1/2 x 1/4 178 • 1 x 1/2 x 1/2
099 1/2 x 3/8
148 • 3/4 x 3/8 179 • 1 x 1/2 x 3/4
180 • 1 x 1/2 x 1
149 • 3/4 x 1/2 187 • 1 x 3/4 x 3/8
197 1 x 3/8 188 • 1 x 3/4 x 1/2
198 • 1 x 1/2 189 • 1 x 3/4 x 3/4
199 • 1 x 3/4
Grooved 196 • 1 x 1 x 1/4
247 • 1-1/4 x 1/2
FFxMale FF Fig. 5109 197 • 1 x 1 x 3/8
Face- 248 • 1-1/4 x 3/4
Fed Grooved 198 • 1 x 1 x 1/2
249 • 1-1/4 x 1 199 • 1 x 1 x 3/4
FFxFF Fig. 5001 5101 298 • 1-1/2 x 1
FFxFEM Fig. 5002 5102 90° STREET SIZE PIPE SIZE 201 • 1 x 1 x 1-1/4
299 • 1-1/2 x 1-1/4 ELBOWS CODE IN INCHES 202 1 x 1 x 1-1/2
FEMxFF Fig. 5003 5103 397 • 2x1
040 1/4 218 • 1-1/4 x 1/2 x 1
398 2 x 1-1/4 219 1-1/4 x 1/2 x 1-1/4
399 2 x 1-1/2 060 3/8
100 1/2 223 • 1-1/4 x 3/4 x 3/4
448 2-1/2 x 1-1/2 224 • 1-1/4 x 3/4 x 1
449 • 2-1/2 x 2 150 3/4
225 • 1-1/4 x 3/4 x 1-1/4
498 3x2 200 • 1
250 • 1-1/4 232 1-1/4 x 1 x 1/2
499 3 x 2-1/2 233 • 1-1/4 x 1 x 3/4
597 4 x 2-1/2 300 • 1-1/2
400 2 234 • 1-1/4 x 1 x 1
598 4x3 235 • 1-1/4 x 1 x 1-1/4
599 4 x 3-1/2 246 • 1-1/4 x 1-1/4 x 3/8
698 • 6x4
Grooved 247 • 1-1/4 x 1-1/4 x 1/2
FFxMale FF Fig. 5107 248 • 1-1/4 x 1-1/4 x 3/4
FFxMale TH Fig. 5108 249 • 1-1/4 x 1-1/4 x 1
251 1-1/4 x 1-1/4 x 1-1/2
90° LONG TURN SIZE PIPE SIZE
265 • 1-1/2 x 1/2 x 1-1/2
ELBOWS CODE IN INCHES
TEES SIZE PIPE SIZE 267 • 1-1/2 x 3/4 x 3/4
040 • 1/4 CODE IN INCHES 268 • 1-1/2 x 3/4 x 1
060 • 3/8 269 • 1-1/2 x 3/4 x 1-1/4
100 • 1/2 020 1/8
040 • 1/4 270 • 1-1/2 x 3/4 x 1-1/2
150 • 3/4 276 1-1/2 x 1 x 1/2
200 • 1 060 • 3/8
100 • 1/2 277 1-1/2 x 1 x 3/4
250 • 1-1/4 150 • 3/4 278 • 1-1/2 x 1 x 1
300 • 1-1/2 279 • 1-1/2 x 1 x 1-1/4
400 • 2 200 • 1
250 • 1-1/4 280 • 1-1/2 x 1 x 1-1/2
450 • 2-1/2 281 1-1/2 x 1 x 2
500 • 3 300 • 1-1/2
400 • 2 286 • 1-1/2 x 1-1/4 x 1/2
550 • 3-1/2 450 • 2-1/2 287 • 1-1/2 x 1-1/4 x 3/4
Grooved 600 • 4
FFxFF Fig. 5111 Face- 500 • 3 288 • 1-1/2 x 1-1/4 x 1
650 • 5 289 • 1-1/2 x 1-1/4 x 1-1/4
700 • 6 Fed Grooved 550 • 3-1/2
FFxFFxFF Fig. 5021 5121 600 • 4 290 • 1-1/2 x 1-1/4 x 1-1/2
750 • 8 FFxFEMxFF Fig. 5022 5122 650 • 5 295 • 1-1/2 x 1-1/2 x 3/8
FFxFFxFEM Fig. 5023 5123
700 • 6 296 • 1-1/2 x 1-1/2 x 1/2
750 • 8 297 • 1-1/2 x 1-1/2 x 3/4
800 • 10 298 • 1-1/2 x 1-1/2 x 1
820 • 12 299 • 1-1/2 x 1-1/2 x 1-1/4

Energy Marine – San Diego, CA • 619-338-0837 Sunbelt Supply – Luling, LA • Ph 985-785-0007


Ferguson – Seattle, WA • 206-767-7700 Sunbelt Supply – Virginia Beach, VA • Ph 757-318-9108
Gulf Coast Marine Sup. Co. – Pascagoula, MS • Ph 228-762-9282 Valve Automation & Controls – Chula Vista, CA • Ph 619-656-7420
Monarch Supply Co. – Chesapeake, VA • Ph 757-487-1700 W & O Supply – Jacksonville, FL • Ph 904-354-3800

Flagg Flow Products


0407-04 5/2/06 8:27 PM Page 1

413-06

FLAGG FLOW PRODUCTS


BRONZE PIPE FITTINGS FOR BRAZED JOINTS
• Type A fittings have a streamlined interior which is designed to reduce turbulence.

REDUCING TEES SIZE PIPE SIZE LONG TURN LONG TURN


(Cont’d.) CODE IN INCHES SINGLE SWEEP SIZE PIPE SIZE DOUBLE SWEEP SIZE PIPE SIZE
302 1-1/2 x 1-1/2 x 2
TEES CODE IN INCHES TEES CODE IN INCHES
350 • 2 x 1/2 x 2 040 • 1/4 060 • 3/8
360 • 2 x 3/4 x 2 060 • 3/8 100 • 1/2
367 2x1x1 100 • 1/2 150 • 3/4
370 • 2x1x2 150 • 3/4 200 • 1
378 • 2 x 1-1/4 x 1-1/4 200 • 1 250 • 1-1/4
379 • 2 x 1-1/4 x 1-1/2 250 • 1-1/4 300 • 1-1/2
380 • 2 x 1-1/4 x 2 300 • 1-1/2 400 • 2
386 2 x 1-1/2 x 3/4 400 • 2 450 • 2-1/2
387 • 2 x 1-1/2 x 1 450 • 2-1/2 Grooved 500 • 3
388 • 2 x 1-1/2 x 1-1/4 500 • 3 FFxFFxFF 5133 550 • 3-1/2
Face- Grooved
Fed Grooved 389 • 2 x 1-1/2 x 1-1/2 FFxFFxFF 5130 550 • 3-1/2 600 • 4
FFxFFxFF Fig. 5021 5121 390 • 2 x 1-1/2 x 2 FFxFEMxFF 5131 600 • 4 650 • 5
FFxFEMxFF Fig. 5022 5122
395 2 x 2 x 1/2 650 • 5 700 • 6
FFxFFxFEM Fig. 5023 5123
396 2 x 2 x 3/4 700 • 6
397 • 2x2x1 750 • 8 CROSSES SIZE PIPE SIZE
398 • 2 x 2 x 1-1/4 CODE IN INCHES
399 • 2 x 2 x 1-1/2 LONG TURN 200 • 1
401 2 x 2 x 2-1/2 SINGLE SWEEP SIZE PIPE SIZE 250 • 1-1/4
410 • 2-1/2 x 1/2 x 2-1/2 REDUCING TEES CODE IN INCHES 300 • 1-1/2
420 2-1/2 x 1 x 2-1/2 400 • 2
149 3/4 x 3/4 x 1/2
428 • 2-1/2 x 1-1/2 x 1-1/2 450 • 2-1/2
190 1 x 3/4 x1
429 • 2-1/2 x 1-1/2 x 2 500 • 3
198 1 x 1 x 1/2
430 • 2-1/2 x 1-1/2 x 2-1/2 550 • 3-1/2
199 1 x 1 x 3/4
435 2-1/2 x 2 x 3/4 600 • 4
225 1-1/4 x 3/4 x 1-1/4
438 • 2-1/2 x 2 x 1-1/2 234 1-1/4 x 1 x 1 Grooved 650 • 5
439 • 2-1/2 x 2 x 2 FFxFFxFFxFF 5135 700 • 6
235 1-1/4 x 1 x 1-1/4 FFxFFxFFxFEM 5137
444 2-1/2 x 2-1/2 x 1/2
249 1-1/4 x 1-1/4 x 1
445 • 2-1/2 x 2-1/2 x 3/4
270 1-1/2 x 3/4 1-1/2
446 • 2-1/2 x 2-1/2 x 1 COUPLINGS SIZE PIPE SIZE
278 1-1/2 x 1 x 1
447 2-1/2 x 2-1/2 x 1-1/4 280 1-1/2 x 1 x 1-1/2 CODE IN INCHES
448 • 2-1/2 x 2-1/2 x 1-1/2 020 1/8
289 1-1/2 x 1-1/4 x 1-1/4
449 • 2-1/2 x 2-1/2 x 2 Grooved 290 040 • 1/4
1-1/2 x 1-1/4 x 1-1/2
451 2-1/2 x 2-1/2 x 3 FFxFFxFF 5130 296 060 • 3/8
1-1/2 x 1-1/2 x 1/2
460 3x1x3 FFxFEMxFF 5131 297 100 • 1/2
1-1/2 x 1-1/2 x 3/4
470 3 x 1-1/2 x 3 298 1-1/2 x 1-1/2 x 1 150 • 3/4
488 • 3 x 2-1/2 x 2 200 • 1
299 1-1/2 x 1-1/2 x 1-1/4
489 • 3 x 2-1/2 x 2-1/2 250 • 1-1/4
360 2 x 3/4 x 2
490 3 x 2-1/2 x 3 300 • 1-1/2
370 2x1x2
495 3x3x1 400 • 2
380 2 x 1-1/4 x 2
496 3 x 3 x 1-1/4 450 • 2-1/2
389 2 x 1-1/2 x 1-1/2
497 • 3 x 3 x 1-1/2
390 2 x 1-1/2 x 2 Face- 500 • 3
498 • 3x3x2
396 2 x 2 x 3/4 Fed Grooved 550 • 3-1/2
499 • 3 x 3 x 2-1/2 600 • 4
538 • 3-1/2 x 3 x 2-1/2 397 2x2x1 FFxFF Fig. 5050 5150
650 • 5
398 2 x 2 x 1-1/4 FFxFEM Fig. 5051 5151
548 • 3-1/2 x 3-1/2 x 2-1/2 700 • 6
399 2 x 2 x 1-1/2 SLIP 5153
549 • 3-1/2 x 3-1/2 x 3 800 • 10
565 4 x 1-1/2 x 4 420 2-1/2 x 1 x 2-1/2
820 • 12
575 4x2x4 438 2-1/2 x 2 x 1-1/2
589 • 4x3x3 439 2-1/2 x 2 x 2
REDUCING SIZE PIPE SIZE
590 4x3x4 447 2-1/2 x 2-1/2 x 1-1/4 COUPLINGS CODE IN INCHES
595 4 x 4 x 1-1/2 448 2-1/2 x 2-1/2 x 1-1/2
596 4x4x2 449 2-1/2 x 2-1/2 x 2 039 1/4 x 1/8
597 4 x 4 x 2-1/2 470 3 x 1-1/2 x 3 059 • 3/8 x 1/4
480 3x2x3 098 • 1/2 x 1/4
598 • 4x4x3
099 • 1/2 x 3/8
639 5x4x4 488 3 x 2-1/2 x 2 147 3/4 x 1/4
646 5 x 5 x 2-1/2 489 3 x 2-1/2 x 2-1/2
497 3 x 3 x 1-1/2 148 • 3/4 x 3/8
647 5x5x3
498 3x3x2 149 • 3/4 x 1/2
696 6x6x3 197 1 x 3/8
749 • 8x8x6 499 3 x 3 x 2-1/2
198 • 1 x 1/2
818 • 12 x 12 x 8 533 3-1/2 x 2-1/2 x 2-1/2 199 • 1 x 3/4
565 4 x 1-1/2 x 4
Face- 247 1-1/4 x 1/2
572 4x2x2
Fed Grooved 248 • 1-1/4 x 3/4
575 4x2x4 FFxFF Fig. 5050 5150 249 • 1-1/4 x 1
590 4x3x4 FFxFEM Fig. 5051 5151 296 1-1/2 x 1/2
598 4x4x3 FEMxFF Fig. 5052 5152 297 1-1/2 x 3/4
298 • 1-1/2 x 1
299 • 1-1/ x 1-1/4
396 2 x 3/4
397 2x1
398 • 2 x 1-1/4
399 • 2 x 1-1/2
448 • 2-1/2 x 1-1/2
449 • 2-1/2 x 2

Energy Marine – San Diego, CA • 619-338-0837 Sunbelt Supply – Luling, LA • Ph 985-785-0007


Ferguson – Seattle, WA • 206-767-7700 Sunbelt Supply – Virginia Beach, VA • Ph 757-318-9108
Gulf Coast Marine Sup. Co. – Pascagoula, MS • Ph 228-762-9282 Valve Automation & Controls – Chula Vista, CA • Ph 619-656-7420
Monarch Supply Co. – Chesapeake, VA • Ph 757-487-1700 W & O Supply – Jacksonville, FL • Ph 904-354-3800

Flagg Flow Products


Flagg 408 5/2/06 8:28 PM Page 1

414-06

FLAGG FLOW PRODUCTS


BRONZE PIPE FITTINGS FOR BRAZED JOINTS
• Type A fittings have a streamlined interior which is designed to reduce turbulence.

REDUCING SIZE PIPE SIZE CLOSE PATTERN SIZE PIPE SIZE BUSHINGS SIZE PIPE SIZE
COUPLINGS CODE IN INCHES RETURN BENDS CODE IN INCHES CODE IN INCHES
(Cont’d.) 497 3 x 1-1/2 150 3/4 059 • 3/8 x 1/4
498 • 3x2 250 1-1/4 097 1/2 x 1/8
499 • 3 x 2-1/2 300 • 1-1/2 098 • 1/2 x 1/4
547 3-1/2 x 2 400 • 2 099 • 1/2 x 3/8
548 • 3-1/2 x 2-1/2 147 3/4 x 1/4
549 • 3-1/2 x 3 148 • 3/4 x 3/8
596 4x2 149 • 3/4 x 1/2
597 4 x 2-1/2 Grooved
FFxFF Fig. 5155 196 1 x 1/4
598 • 4x3
599 • 4 x 3-1/2 197 1 x 3/8
198 • 1 x 1/2
647 5x3 OPEN PATTERN SIZE PIPE SIZE
RETURN BENDS CODE IN INCHES 199 • 1 x 3/4
648 • 5 x 3-1/2 Face-
696 6x3 Fed Grooved 245 1-1/4 x 1/4
200 • 1 Male FFxFF Fig. 5057 5157 246 1-1/4 x 3/8
698 • 6x4
Face- 250 • 1-1/4 Male FFxFEM Fig. 5058 247 1-1/4 x 1/2
699 6x5
Fed Grooved 300 1-1/2 248 • 1-1/4 x 3/4
FFxFF Fig. 5050 5150 749 8x6
799 10 x 8 400 2 249 • 1-1/4 x 1
FFxFEM Fig. 5051 5151
819 12 x 10 450 2-1/2
294 1-1/2 x 1/4
500 3
Grooved 295 1-1/2 x 3/8
600 4
FFxFF Fig. 5156 296 1-1/2 x 1/2
45° “Y” BRANCHES SIZE PIPE SIZE 297 1-1/2 x 3/4
CODE IN INCHES 298 • 1-1/2 x 1
ADAPTERS SIZE PIPE SIZE
100 • 1/2 CODE IN INCHES 299 • 1-1/2 x 1-1/4
150 • 3/4 393 2 x 1/4
040 1/4 394 2 x 3/8
200 • 1
060 3/8 395 2 x 1/2
250 • 1-1/4
100 1/2 396 2 x 3/4
300 • 1-1/2
150 3/4
400 • 2 200 1 397 2x1
450 • 2-1/2 398 • 2 x 1-1/4
250 1-1/4 399 • 2 x 1-1/2
500 • 3
300 1-1/2 444 2-1/2 x 1/2
550 • 3-1/2 Face-Fed Grooved
400 2 445 2-1/2 x 3/4
600 • 4 FFxMale TH Fig. 5060 5160
450 2-1/2
Grooved 650 • 5 500 3 448 • 2-1/2 x 1-1/2
FFxFFxFF Fig. 5140 700 • 6 600 4 449 • 2-1/2 x 2
750 • 8 497 3 x 1-1/2
ADAPTERS SIZE PIPE SIZE 498 • 3x2
CODE IN INCHES 499 • 3 x 2-1/2
45° REDUCING SIZE PIPE SIZE 544 3-1/2 x 1
“Y” BRANCHES CODE IN INCHES 041 1/4 x 3/8
061 3/8 x 1/2 546 3-1/2 x 1-1/2
198 1 x 1 x 1/2 151 3/4 x 1 547 3-1/2 x 2
199 1 x 1 x 3/4 201 1 x 1-1/4 548 • 3-1/2 x 2-1/2
234 1-1/4 x 1 x 1 251 1-1/4 x 1-1/2 549 • 3-1/2 x 3
280 1-1/2 x 1 x 1-1/2 302 1-1/2 x 2 595 4 x 1-1/2
296 1-1/2 x 1-1/2 x 1/2 401 2 x 2-1/2 596 4x2
297 1-1/2 x 1-1/2 x 3/4 Face-Fed Grooved 598 • 4x3
298 1-1/2 x 1-1/2 x 1 FFxMaleTH Fig. 5061 5161 599 • 4 x 3-1/2
299 1-1/2 x 1-1/2 x 1-1/4 One Size Larger 646 5 x 2-1/2
370 2x1x2 649 • 5x4
389 2 x 1-1/2 x 1-1/2 ADAPTERS SIZE PIPE SIZE 694 6x2
CODE IN INCHES 695 6 x 2-1/2
Face- 390 2 x 1-1/2 x 2
FedGrooved 397 2x2x1 040 1/4 697 6 x 3-1/2
FFxFFxFF Fig. 5040 5140 398 2 x 2 x 1-1/4 060 3/8 699 6x5
399 2 x 2 x 1-1/2 100 1/2 747 8x4
439 2-1/2 x 2 x 2 150 3/4 748 8x5
200 1 749 8x6
446 2-1/2 x 2-1/2 x 1
448 2-1/2 x 2-1/2 x 1-1/2 250 1-1/4 799 10 x 8
449 2-1/2 x 2-1/2 x 2 300 1-1/2
480 3x2x3 400 2
488 3 x 2-1/2 x 2 Grooved 500 3
FEMxMale TH Fig. 5063 600 4
497 3 x 3 x 1-1/2
498 3x3x2 PLUGS
CAPS SIZE PIPE SIZE SIZE PIPE SIZE
499 3 x 3 x 2-1/2 CODE IN INCHES
CODE IN INCHES
547 3-1/2 x 3-1/2 x 2
589 4x3x3 040 1/4 CORED – FF x Male TH – 5064
060 3/8 Grooved
596 4 x4x2 100 1/2 450 2-1/2
598 4x4x3 150 3/4
200 1 SOLID – FF 5065
250 1-1/4 100 1/2
300 1-1/2 150 3/4
400 2 200 1
500 3 250 1-1/4
550 3-1/2 300 1-1/2
600 4 400 2
650 5
FF 5154 Grooved 700 6 600 4
with Ring 750 8

Energy Marine – San Diego, CA • 619-338-0837 Sunbelt Supply – Luling, LA • Ph 985-785-0007


Ferguson – Seattle, WA • 206-767-7700 Sunbelt Supply – Virginia Beach, VA • Ph 757-318-9108
Gulf Coast Marine Sup. Co. – Pascagoula, MS • Ph 228-762-9282 Valve Automation & Controls – Chula Vista, CA • Ph 619-656-7420
Monarch Supply Co. – Chesapeake, VA • Ph 757-487-1700 W & O Supply – Jacksonville, FL • Ph 904-354-3800

Flagg Flow Products


Flagg 409 5/2/06 8:28 PM Page 1

415-06

FLAGG FLOW PRODUCTS


COPPER-NICKEL SOCKET WELD PIPE FITTINGS
FOR LOW-PRESSURE APPLICATIONS – 90/10 and 70/30

90° LONG
TURN ELL TEE
90° ELL 45° ELL REDUCING TEE
90/10 CuNi 6801 90/10 CuNi 6804 90/10 CuNi 6811 90/10 CuNi 6821
70/30 CuNi 6901 70/30 CuNi 6904 70/30 CuNi 6911 70/30 CuNi 6921

SINGLE SWEEP TEE DOUBLE SWEEP TEE CROSS LATERAL


90/10 CuNi 6830 90/10 CuNi 6833 90/10 CuNi 6835 90/10 CuNi 6840
70/30 CuNi 6930 70/30 CuNi 6933 70/30 CuNi 6935 70/30 CuNi 6940

COUPLING REDUCING COUPLING CAP BUSHING


90/10 CuNi 6850 90/10 CuNi 6850 90/10 CuNi 6854 90/10 CuNi 6857
70/30 CuNi 6950 70/30 CuNi 6950 70/30 CuNi 6954 70/30 CuNi 6957

150# COMMERCIAL 150# / 250# 200# BUTTERFLY


UNION ASSEMBLY FLANGE NAVY FLANGE FLANGE
90/10 CuNi 6815 90/10 CuNi 6870 90/10 CuNi 6875/6881 90/10 CuNi 6888
70/30 CuNi 6915 70/30 CuNi 6970 70/30 CuNi 6975/6981 70/30 CuNi 6988

These low pressure Cu-Ni cast socket weld fittings and flanges are resistant to corrosion in systems handling a variety
of liquid and chemical products.
Specify item and size when ordering. Sizes: 1/2", 3/4", 1", 1-1/4", 2", 2-1/2"

SILVER BRAZED FITTINGS • UNIONS • UNION FITTINGS • FLANGES


FLAGG FLOW LEE BRASS
PRODUCTS P.O. Box 1229, Anniston, AL 36202
800-876-1811 • Tel: 256-831-2501 • Fax: 800-876-1800
410 5/2/06 8:29 PM Page 1

416-06

NUFLO DIV./FLOTECH, INC.


Welding Pipe Fittings
Copper-Nickel Class 200
Specify when ordering copper-nickel 90/10 or 70/30.

90° Elbow Long Radius 90° Elbow Short Radius 45° Elbow Tee Single Sweep Tee
601111 601101 601104 601121 601130

Double Sweep Tee 45° Lateral Concentric Reducer 180° Return Bend Sleeve
601133 601140 601150 601156 601155

Max. Min. “C”


IPS O.D. Wall Min. “A” “S” “B” “C-C” “E” “G” “H” “K” “L” “D” “W”
Size Thickness Tangent Min. Min. Min.

1/4 .540 .065 9/32 1-9/32 1-5/32 45/64 2 11/16 - - - - .540 +- .003 17/32
.000
3/8 .675 .065 3/8 1-5/8 1-7/16 57/64 2-1/2 29/32 - - - 1-1/4 .675 +- .003 5/8
.000
1/2 .840 .065 7/16 1-15/16 1-11/16 1-1/16 3 1-3/32 - - - 1-1/2 .840 +- .003 3/4
.000
3/4 1.050 .065 15/32 1-19/32 1-7/32 1-5/16 2-1/4 1-1/4 - - - 1-1/2 1.050 +- .003 13/16
.000
1 1.315 .065 1/2 2 1-1/2 1-1/8 3 1-1/2 - 5-3/4 1-3/4 2 1.315 +- .003 7/8
.000
1-1/4 1.660 .072 9/16 2-7/16 1-13/16 1-11/32 3-3/4 1-7/8 - 6-1/4 1-3/4 2 1.660 +- .003 1
.000
1-1/2 1.900 .072 11/16 2-15/16 2-3/16 1-5/8 4-1/2 2-1/4 - 7 2 2-1/2 1.900 +- .005 1-1/4
.000
2 2.375 .083 23/32 3-23/32 2-23/32 1-31/32 6 2-1/2 - 8 2-1/2 3 2.375 +- .005 1-5/16
.000
2-1/2 2.875 .083 7/8 4-5/8 3-3/8 2-7/16 7-1/2 3 2 9-1/2 2-1/2 3-/12 2.875 +- .007 1-9/16
.000
3 3.500 .095 29/32 5-13/32 3-29/32 2-49/64 9 3-3/8 2-1/2 10 3 3-/12 3.500 +- .007 1-21/32
.000
3-1/2 4.000 .095 15/16 6-1/4 4-7/16 3-11/64 10-1/2 3-3/4 2-3/4 11-1/2 3 4 4.000 +- .007 1-3/4
.000
4 4.500 .109 31/32 6-31/32 4-31/32 3-29/64 12 4-1/8 3 12 3 4 4.500 +- .007 1-13/16
.000
5 5.563 .125 1-3/32 8-19/32 6-3/32 4-13/64 15 4-7/8 4 13-1/2 3-1/2 5 5.563 +- .007 2-1/16
.000
6 6.625 .134 1-11/64 10-11/64 7-11/64 4-29/32 18 5-5/8 5 14-1/2 3-1/2 5-1/2 6.625 +- .007 2-7/32
.000
7 7.625 .134 1-9/32 11-25/32 8-9/32 5-5/8 21 6-5/16 - - - 6 7.625 +- .000
.007 2-7/16

8 8.625 .148 1-3/8 13-3/8 9-3/8 6-11/32 24 7 7-1/2 17-1/2 4-1/2 6 + .007
8.625 - .000 2-5/8

9 9.625 .187 1-9/16 15-1/16 10-9/16 7-5/32 27 7-3/4 - - - 7 9.625 +- .007 3


.000
10 10.750 .187 1-9/16 16-9/16 11-9/16 7-25/32 30 8-1/2 - - - 7 10.750 +- .007 3
.000
12 12.750 .250 1-11/16 19-11/16 13-11/16 9-9/64 36 10 - - - 8 12.750 +- .007 3-1/4
.000
All dimensions are in inches.

STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK 3485 Evergreen Ave. • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
CHARLESTON Tel: 800-962-9696 • 904-354-3800 SAN DIEGO • LONG BEACH
JACKSONVILLE Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
0411-04 5/2/06 8:30 PM Page 1

417-06

BESTWELD, INC.

BELLED-END FITTINGS
IPS Sizes: 1/2", 3/4", 1", 1-1/4”, 1-1/2", 2", 2-1/2", 3", 3-1/2", 4", 5", 6", 8", 10", 12"
Pressure Rating: 200 psi (S10), 700 psi (S40S)
Burst Pressure Rating: IAW ANSI B16.9 Design Proof Testing
Systems: Firemain, Seawater, Cooling, Lube Oil, Exhaust, Steam
Welding: TIG w/Helium or Argon shield, No ID Purge needed

Copper-Nickel Stainless Steel


Alloys: 706(90/10), 715(70/30) Alloys: 304/304L, 309,
Specifications: MSS SP119, 310, 316L, 317L,
MIL-T-16420K, MIL-I-45208A 321/321H, 347
Specifications: MSS SP119,
ASTM A312, A403

Titanium Aluminum
Alloys: Gr2, Gr7 Alloys: 5083, 5086, 6061/6063
Specifications: MSS SP119, Specifications: MSS SP119,
ASTM B861, B862, B363 ASTM B241, B361

90° 45° 90° 45°


Long Radius Elbows Long Radius Street Elbows Short Radius Elbows Short Radius Street Elbows
1/2” to 12” 1/2" to 12" 1" to 12" 1" to 12"

Straight Tees Reducing Tees Straight Thermowell Tees Angle Thermowell Tees
1/2" to 12" 3/4" x 1/2" to 12" x 10" 1/2" x 1/2" x 3/4" to 1/2" x 3/4" x 1/2" to
1-1/2" x 1-1/2" x 3/4" 1-1/4" x 3/4" x 1-1/4"

Concentric Reducers Concentric Street Reducers Eccentric Reducers Caps


3/4" x 1/2" to 12" x 10" 3/4" x 1/2" to 12" x 10" 3/4" x 1/2" to 12" x 10" 1/2" to 12"

BESTWELD, INC. Call us, fax us or e-mail us and we’ll send our NEW CATALOG on “CD”
Pottstown, PA 19464
Ph: 610-718-9700 including 2D and 3D CAD Drawings.
Fax: 610-718-9800
Web: www.bestweld.com SEE OUR AD IN THE ADVERTISING SECTION
E-Mail: fittings@bestweld.com
3076 5/2/06 8:31 PM Page 642

418-06

COPPER NICKEL METRIC PIPE & FITTINGS

PIPE & TUBE – Standards on facing page BARS & PLATES


Seamless Pipe
Welded Pipe
Condenser Pipe
Copper Tube

PIPE FITTINGS Sheets & Plates Hexagon Bar Round Bar

To Order: Specify 1) item and 2) pipe size (or sizes) To Order


Sheets & Plates: Specify 1) length, 2) width and 3) thickness
Tee-Pieces Hexagon Bar: Specify 1) length and 2) distance across flats
Round Bar: Specify 1) length and 2) diameter
Equal, Seamless Reduced, Seamless
& Welded
FLANGES & COLLARS
To Order: Specify 1) item and 2) pipe size

Elbows Reducers
Eccentric, Concentric
90° L/R; Inner Flange Slip-On Flange
Seamless, Welded
S/R

Outer Flange Welding Collar


30°, 45°
L/R; S/R Saddles

Seamless, Welded
Weld Neck Flange Bulkhead Flange

Welding
End Caps

Blind Flange Flange Connector

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
world wide
World metric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
3077 5/2/06 8:32 PM Page 642

419-06

COPPER NICKEL METRIC PIPE STANDARDS


Outside Diameter of Pipe 10 Bar 14 Bar 16 Bar 20 Bar

Wall Theoretical Wall Theoretical Wall Theoretical Wall Theoretical


Nominal Actual
Thickness Weight Thickness Weight Thickness Weight Thickness Weight

inch ND mm actual mm Kg/m actual mm Kg/m actual mm Kg/m actual mm Kg/m

– – 8 0.20 – – –

1/8 – 10 0.26 0.26 0.26 0.26


1.0 1.0
1/4 – 12 1.0 0.31 0.31 0.31 0.31
1.0
3/8 10 16 0.42 0.42 0.79 0.79

1/2 15 20 0.53 0.53 2.0 1.01 2.0 1.01

3/4 20 25 0.99 0.99 1.30 1.30

1 25 30 1.20 1.20 1.93 1.93

1-1/4 32 38 1.5 1.54 1.5 1.54 2.50 2.50

1-1/2 40 44.5 1.81 1.81 2.95 2.95


2.5 2.5
2 50 57 2.34 2.34 3.83 3.83

2-1/2 65 76.1 4.16 2.0 4.16 5.17 5.17


2.0
3 80 88.9 4.88 6.07 6.07 6.07
2.5
4 100 108 7.41 7.41 8.85 8.85
3.0
5 125 133 9.16 10.95 10.95 10.95
2.5 3.0 3.0
6 150 159 10.99 13.14 13.14 15.29
3.5
7 175 193.7 13.43 18.70 16.07 18.70
3.5
8 200 219.1 18.21 21.19 4.0 24.17 4.5 27.12
3.0
10 250 267 22.24 4.0 29.55 4.5 33.18 5.5 40.39

12 300 323.9 35.94 5.0 44.78 5.5 49.18 7.0 62.30

14 350 368 40.89 5.5 56.00 6.5 65.99 8.0 80.89


4.0
16 400 419.1 46.62 69.60 7.0 81.00 9.0 103.64
6.0
18 450 457.2 50.91 76.03 8.0 100.93 9.5 119.45

20 500 508 4.5 63.63 6.5 91.55 8.5 119.24 11.0 153.54

24 600 610 5.0 84.96 8.0 135.26 10.5 176.79 13.0 217.97

28 700 711 118.80 9.0 177.45 12.0 235.58 15.0 293.22


6.0
32 800 813 135.99 10.0 225.53 13.5 303.14 17.0 380.06

36 900 914 8.0 203.57 11.0 278.98 15.5 391.14 19.0 477.60

Material Standards
CuNi10Fe1.6Mn DIN 86019 DIN 1755 EEMUA 144 BS 2871 ASTM B466 EN 12449
See facing page for fittings.

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
world wide
World metric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0412-04 5/2/06 8:33 PM Page 418

420-06

MILITARY SPECIFICATION PIPE AND TUBING

SPECIFICATION TYPE ANALYSIS SERVICE


MIL-P-1144 Seamless or Welded Stainless–All Grades High Temperature & Pressure
MIL-P-24338 Seamless Medium Carbon High Pressure
MIL-P-24691/1 Seamless or Welded Carbon Pressure
MIL-P-24691/2 Seamless or Welded Chrome Moly High Temperature & Pressure
MIL-P-24691/3 Seamless or Welded Stainless–All Grades High Temperature & Pressure
MIL-T-1368 Seamless Nickel Copper Alloy Corrosion Applications
MIL-T-6736 Seamless 4130 Aircraft
MIL-T-8504 Seamless or Welded Type 304 Corrosion & Hydraulic
MIL-T-8606 Seamless 321, 347, 304L Stainless Corrosion Applications
MIL-T-8808 Seamless 321 & 347 Stainless Corrosion Applications
MIL-T-15005 Seamless Copper Nickel Alloy Condenser & Heat Exchanger
MIL-T-16286 Seamless Class A Low Carbon Boiler
MIL-T-16286 Seamless Class G Medium Carbon Boiler
MIL-T-16286 Seamless Class C Type 321 or 347 High Pressure Steam &
Super Heater Generator
MIL-T-16286 Seamless Class E & F Chrome Moly High Temperature & Pressure
MIL-T-16343 Seamless Medium Carbon Structural
MIL-T-16420 Seamless or Welded Copper Nickel Alloy Corrosion Applications
MIL-T-18165 Seamless Chrome Moly Alloy High Temperature & Pressure
MIL-T-20155 Seamless Carbon Moly Pressure
MIL-T-20157 Seamless Carbon Type A, B, C, D, E Pressure
MIL-T-22555 Seamless Low Carbon Pressure
MIL-T-23226 Seamless Type 304, 304L, 347 High Pressure Steam &
Super Heater Generator
MIL-T-24107 Seamless Copper Corrosion Applications
WW-P-406 D Seamless or Welded Low & Medium Carbon Ordinary Use
WW-P-404 D Seamless or Welded Low & Medium Carbon Pressure Applications

To order, specify outside diameter, wall thickness and length desired.

A.Z.E. SUPPLY CO., INC. • Level 1 & Mil-I-45208A Certified.


114 FORREST AVENUE
SUITE 114 • Pipe & tubing also available in commercial and AMS specifications.
NARBERTH, PA 19072 • Mil-Spec and ANSI Fittings, Flanges & Valves Available.
Tel: (610) 667-3406 • ABS certification available.
Fax: (610) 667-3415 • Rated one of the top suppliers to the U.S. Government.
E-mail: piperjc@erols.com
0413 5/2/06 8:34 PM Page 1

421-06

GENERAL WIRE SPRING CO.

VIDEO PIPE INSPECTION/LOCATION SYSTEM


With two camera and pushrod options, this self-contained unit can
troubleshoot 1-1/2” to 4” lines up to 100 ft. long with the micro system, or
2” to 4” lines up to 200 ft. long with the mini system.

• Self-contained with pushrod, reel and monitor all in one integral


package.
• Sleek, rugged housing ensures durability, versatility and ease
of use while protecting the unit from abuse in the field.
• Available with either 100 ft. of micro-pushrod and micro color
camera just 1” in diameter, or 200 ft. of mini-pushrod with mini
color camera 1.3” in diameter.
• 7-inch LCD screen in durable housing mounted on an
extendable arm that allows operator to pivot it to best
viewing angle.
• AC/DC power supply with rechargeable battery that lasts
more than three hours.
• Built-in dual frequency transmitter (512 hz and 874 hz) reduces
interference and makes camera easier to locate.
• Also features picture inverter, on screen footage counter in both
English and metric, built-in text writer, time and date stamp,
microphone jack and video and audio jacks for external recording
devices.

WATER LEAK LOCATION SYSTEM


System is designed to pinpoint water leaks Both feature wind-proof, shock-resistant housings to
in commercial water lines. Locates leaks reduce unwanted noise, as well as interchangeable
under concrete slabs, in walls, and in other components to maximize jobsite reliability.
visually inaccessible areas.
A safety switch located in the handle protects the operator
Advanced acoustic filter and amplification from sudden loud noises by muting the sound when the
technology make it possible to hear the button is released. For
“woosh” or “hiss” of the water leak through especially hard to find
ambient noise like wind, air conditioners or leaks, the optional Sound
machinery. Amplification Manifold
adds air to the line,
The key element is the Digital Spectrum increasing water pressure.
Analyzer, which mutes other sounds that This amplifies leak
interfere with leak location. It does it with sounds, making them
16 audio filter combinations, providing the easier to locate.
widest range to muffle other sounds and locate a leak. This is
crucial to successful location. High quality headphones give The system runs on six
clear sound while reducing interference from surrounding noise. “AA” batteries that will last
20 hours or more. A
Two specially designed sensors listen for the “gurgling” or the safety switch automatically shuts down the system when
“hammering” of a cracked pipe below ground. The ground the headphones are removed to extend battery life. Power
Sensor locates through hard surfaces like concrete, asphalt, light blinks when the batteries are low. All components are
and tile. The Probe Sensor picks up leak sounds through soft stored in a heavy duty carrying case (20" x 13.5" x 9").
surfaces such as carpet, or it can be used as a contact probe
on above ground pipes or hydrants. GR-B – Gen-Ear plus Sound Amplification Manifold

1101-M Thompson Avenue • McKees Rocks, PA 15136 USA


Phone: 800-245-6200 or 412-771-6300 • Fax: 412-771-2771
www.drainbrain.com • E-mail: info@drainbrain.com
- 04 5/2/06 8:35 PM Page 1

422-06

FLOTECH, INC.

CROSS VALVES
Construction:
Body/Bonnet Cast Steel, Ductile
Cross Valves Iron or Bronze
Dimensions (inches) Trim Bronze or Monel
F-F C-F
2 8 4 Design:
Stop Valve
2-1/2 8-1/2 4-1/4
Stop Check (shown)
3 9-1/2 4-3/4
3-1/2 10-1/2 5-1/4 End Connections:
4 11-1/2 5-3/4 Buttweld
5 14 7 Flanged ANSI
Flanged DIN
6 16 8
Flanged JIS
8 19-1/2 9-3/4
Note: Dimensions shown above are typical. Certifications available
Other dimensions are available upon request upon request:
ABS, DNV, Lloyds,
Germanischer Lloyd

MANIFOLDS

Simplex Manifold Valves


Dimensions (inches)
A B C D E Construction:
Body/Bonnet Cast Steel, Ductile
2x2 6 4 12 8 4
Iron or Bronze
2 x 2-1/2 6 4 12 8 4
Trim Bronze or Monel
2x3 6-1/4 4 12-1/2 8 4-1/2
2x4 6-5/8 4-1/4 13-1/4 8-1/2 5 Design:
2-1/2 x 2-1/2 7 4-1/4 14 8-1/2 5-7/16 Stop Valve
2-1/2 x 3 7 4-1/4 14 8-1/2 5-7/16 Stop Check (shown)
2-1/2 x 4 7-1/4 4-1/4 14-1/2 8-1/2 6-1/8
3x3 7 4-3/4 14 9-1/2 5 End Connections:
3x4 7-1/4 4-3/4 14-1/2 9-1/2 5-5/8 Buttweld
4x4 8 5-3/4 16 11-1/2 5-3/4 Flanged ANSI
4x5 8-1/2 5-3/4 17 11-1/2 6-3/8 Flanged DIN
Flanged JIS
4x6 8-1/2 6 17 12 6-3/8
5x5 9 7 18 14 7
Certifications available
5x6 9 7 18 14 7
upon request:
6x6 9-1/2 8 19 16 8 ABS, DNV, Lloyds,
6x8 10 8 20 16 7-1/2 Germanischer Lloyd
6 x 10 10-13/16 8-1/2 21-5/8 17 9
8x8 11-1/4 9-3/4 22-1/2 19-1/2 9-3/4
8 x 10 11-1/4 9-3/4 22-1/2 19-1/2 9-3/4
Note: Dimensions shown above are typical.
Other dimensions are available upon request

• Condensers/Heat Exchangers

Flotech Inc.
3330 Evergreen Ave.
Jacksonville, FL 32206 • Valve Repair
• Foundry/Castings
904-358-1849 / Fax: 904-632-2383 • Machining
www.flotechinc.com TUBE SERVICES • Welding / Fabrication
NEW MANUFACTURE – REPAIR – RETUBE – INSPECT – TEST – CLEAN – REPLACEMENT PARTS – REPLACEMENT TUBES
0697-04 5/2/06 8:36 PM Page 1

423-06

FLOTECH, INC.
SUCTION BELLMOUTH

• Efficient design minimizes hydraulic


loss, prevents vortex and gas formation
• Permits close “stripping” of liquid cargos
• Standard construction is cast steel
• Standard design has beveled end for
welding connection
• Available ANSI or metric

PIPE A B C D E WEIGHT
SIZE inches mm Inches mm Inches mm Inches mm Inches mm lbs. kg
3 5 125 3-1/2 88 11-3/4 294 5-1/2 137 7/16 11 10 22
4 6-3/4 169 4-1/2 113 15-1/4 380 6-3/4 170 1/2 13 20 44
5 6-3/8 160 5-9/16 140 19-1/4 480 8-1/4 206 5/8 16 40 88
6 10 250 6-5/8 165 23-1/4 580 10 250 3/4 19 60 132
8 13-3/8 335 8-5/8 215 30-3/4 769 13-3/4 345 1 25 135 297
10 16-3/4 419 10-3/4 270 39 975 16-3/4 420 1-1/4 32 185 407
12 20 500 12-3/4 320 45-3/8 1135 21-3/8 535 1-1/2 38 330 726

BEVELLED FOR WELDING


TO SUCTION PIPE
SMOOTH INNER CONTOUR
REDUCES HYDRAULIC
LOSS AND PREVENTS
GAS FORMATION

RADIAL RIBS PREVENT


VORTEX FORMATION
AND SET BELL TO PROPER
HEIGHT

AREA AT THROAT
150% PIPE AREA

• Condensers/Heat Exchangers

Flotech Inc.
3330 Evergreen Ave.
Jacksonville, FL 32206 • Valve Repair
• Foundry/Castings
904-358-1849 / Fax: 904-632-2383 • Machining
www.flotechinc.com TUBE SERVICES • Welding / Fabrication
NEW MANUFACTURE – REPAIR – RETUBE – INSPECT – TEST – CLEAN – REPLACEMENT PARTS – REPLACEMENT TUBES
0430-04 5/2/06 8:41 PM Page 440

424-06

METRIC HIGH PRESSURE HYDRAULIC HOSE


Nominal Diameters of Hoses
5 6 8 10 12 (13) 16 20 25 32 40 50 60 80 100
3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

2ST 4SP

High Ultra high


pressure hose DIN 20022 part 2, acc. to ISO standard 1436 Pressure hose DIN 20023 (not for field assembly)
Inner tube and cover: synthetic rubber Inner tube and cover: synthetic rubber
Reinforcement: double braid of high tensile wire with Reinforcement: four ply spiral wire wrap, insulation layers
insulation layer Temperature range: from -40°C up to +125°C
Temperature range: from -40°C up to +125°C
DN d1 d2 Min. Working Pressure Proof Min. Weight
DN d1 d2 Min. Working Pressure Proof Min. Weight Bend dyn. stat Pressure Burst
Bend. dyn. stat Pressure Burst Radius Pressure
Radius Pressure mm mm mm bar bar bar bar kg/m
mm mm mm bar bar bar bar kg/m 6 6,4 17,9 150 500 800 1200 2000 0,600
5 4,8 15,9 90 415 660 990 1650 0,370 10 9,5 21,4 180 500 800 1200 2000 0,780
6 6,4 17,5 100 400 640 960 1600 0,445 12(13) 12,7 24,6 230 400 640 960 1600 0,970
8 7,9 19,1 115 350 560 840 1400 0,537 16 15,9 28,5 250 400 640 960 1600 1,120
10 9,5 21,4 130 330 530 795 1320 0,607 20 19 32,2 300 400 640 960 1600 1,575
12 (13) 12,7 24,6 180 275 440 660 1100 0,751 25 25,4 39,7 340 315 500 750 1250 2,150
16 15,9 27,8 200 250 400 600 1000 0,891 32 31,8 50,8 460 250 400 600 1000 3,400
20 19 31,8 240 215 340 510 850 1,083 40 38,1 57,2 560 200 315 500 800 3,800
25 25,4 39,7 300 165 260 390 650 1,332 50 50,8 69,8 660 200 315 500 800 4,500
32 31,8 50,8 420 125 200 300 500 2,325
40 38,1 57,2 500 90 145 220 360 2,880
50 50,8 69,8 630 80 130 195 320 3,143
60 60 74 650 80 130 195 320 3,476
2ST 20 AO D1 - 1000

Hose type
Ordering Instructions for Factory Assembled Nominal Diameter (DN, SIZE)
Hose Lines
Type of end fittings
What details are necessary? (Dash)
When ordering factory assembled hose lines, please indicate
Nominal length
the following:
End fitting A O Type of hose, 2ST Nominal diameter 20 End fitting D1
1. Hose type
2. Size
3. Type of end fitting, one end
4. Type of end fitting, other end
5. Nominal Length (NL) in mm

How to order (example):


Hose line of hose type 2ST, size (ND) 20 with end fitting type Nominal length (NL)
AO and D1 with a nominal length (NL) of 1000 mm

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0419-04 5/7/06 2:38 PM Page 1

425-06

PARKER FLUID CONNECTORS GROUP


All of the fittings in this section are accepted by the U.S. Coast Guard under 46CFR56.60-25(c). They meet SAE J1942 and J1475. They are also
accepted by American Bureau of Shipping and the Canadian Coast Guard. They are Type accepted by Det Norske Veritas. (DNV only accepts
permanent couplings).

Medium & High Pressure Hose - No Skive


Hose cover does not have to be removed to attach No-Skive fittings.
421 Hose SAE 100R1 Type AT
Construction: Synthetic rubber tube; one braid
of high tensile steel wire reinforcement; MSHA
Part Hose Hose Working Burst Minimum accepted synthetic rubber cover.
Number I.D. O.D. Pressure Pressure Bend Radius
inch mm inch mm psi MPa psi MPa inch mm Applications & Temperature Range: Medium pressure service hose for use with:
421-3 3/16 5 0.46 12 3000 20,7 12000 83 3-1/2 90 Petroleum based hydraulic fluids and lubricating oils within a temperature range of
421-4 1/4 6,3 0.53 13 2750 19,0 11000 76 4 100 -40°F to +257°F (-40°C to +125°C);
421-5 5/16 8 0.59 15 2500 17,2 10000 69 4-1/2 115
421-6 3/8 10 0.68 17 2250 15,5 9000 62 5 130 Water, water/gycol, water/oil emulsion hydraulic fluids up to +185°F (+85°C);
421-8 1/2 12,5 0.81 20 2000 13,8 8000 55 7 180
421-10 5/8 16 0.94 24 1500 10,3 6000 41 8 200 Air within a temperature range of -40°F to +158°F (-40°C to +70°C).
421-12 3/4 19 1.09 28 1250 8,6 5000 35 9-1/2 240 For air or gas applications above 250 psi (1, 7 MPa), cover should be pin pricked.
421-16 1 25 1.40 36 1000 6,9 4000 28 12 300
421-20 1-1/4 31,5 1.73 44 625 4,3 2500 17 16-1/2 420 Fittings: 43 Series and Field Attachable 42 Series.
421-24 1-1/2 38 2.00 51 500 3,5 2000 14 20 500
421-32 2 51 2.50 64 375 2,6 1500 10 25 630

301 Hose SAE 100R2 Type AT Construction: Synthetic rubber tube; two braids
of high tensile steel wire reinforcement; MSHA
Part Hose Hose Working Burst Minimum accepted synthetic rubber cover.
Number I.D. O.D. Pressure Pressure Bend Radius
inch mm inch mm psi MPa psi MPa inch mm Applications & Temperature Range: High pressure service hose for use with:
301-4 1/4 6,3 0.59 15 5000 34,5 20000 138 4 100 Petroleum based hydraulic fluids and lubricating oils within a temperature range of
301-6 3/8 10 0.75 19 4000 27,5 16000 110 5 130 -40°F to +257°F (-40°C to +125°C);
301-8 1/2 12,5 0.88 22 3500 24 14000 96 7 180
301-10 5/8 16 1.00 25 2750 19 11000 76 8 200 Water, water/gycol, water/oil emulsion hydraulic fluids up to +185°F (+85°C);
301-12 3/4 19 1.16 30 2250 15,5 9000 62 9-1/2 240
301-16 1 25 1.50 38 2000 13,8 8000 55 12 300 Air within a temperature range of -40°F to +158°F (-40°C to +70°C).
301-20 1-1/4 31,5 1.86 47 1625 11,2 6500 45 16-1/2 420 For air or gas applications above 250 psi (1, 7 MPa), cover should be pin pricked.
301-24 1-1/2 38 2.15 54 1250 8,6 5000 35 20 500
301-32 2 51 2.66 68 1125 7,8 4500 31 25 630 Fittings: 43 Series and Field Attachable 30 Series.

381 Hose SAE 100R2 Type AT & DIN 20 022- 2SN Construction: Synthetic rubber tube; two braids
of tensile steel wire reinforcement; MSHA
accepted synthetic rubber cover.
Part Hose Hose Working Burst Minimum
Number I.D. O.D. Pressure Pressure Bend Radius Applications & Temperature Range: High pressure service hose for use with:
inch mm inch mm psi MPa psi MPa inch mm
381-4 1/4 6,3 0.59 15 5800 40 23200 160 4 100 Petroleum based hydraulic fluids and lubricating oils within a temperature range of
381-5 5/16 8 0.66 17 5075 35 20300 140 4-1/2 115 -40°F to +257°F (-40°C to +125°C);
381-6 3/8 10 0.75 19 5000 34,5 20000 138 5 130
381-8 1/2 12,5 0.88 22 4250 29,3 17000 118 7 180 Water, water/gycol, water/oil emulsion hydraulic fluids up to +185°F (+85°C);
381-10 5/8 16 1.00 25 3625 25 14500 100 8 200
381-12 3/4 19 1.16 30 3125 21,5 12500 86 9-1/2 240
Air within a temperature range of -40°F to +158°F (-40°C to +70°C).
381-16 1 25 1.50 38 2500 17.5 10000 70 12 300 For air or gas applications above 250 psi (1, 7 MPa), cover should be pin pricked.
381-20 1-1/4 31,5 1.87 47 2250 15,5 9000 62 16-1/2 420
381-24 1-1/2 38 2.15 54 1800 12,5 7200 50 20 500
Fittings: 43 Series and Field Attachable 30 Series.
381-32 2 51 2.66 68 1300 9 5200 36 25 630

Crimping Machines
Crimper complete with power pack, Crimper complete with power pack,
die rings and dies for -4, -6, -8, -12 die rings and dies for -4, -6, -8, -12
and -16 hoses. 80C-001 and -16 hoses. 80C-001
Optional dies: Optional dies:
-5 hose 80C-A05 -5 hose 80C-A05
-10 hose 80C-A10 -10 hose 80C-A10
-20 hose 80C-A20 -20 hose 80C-A20
Dimensions: 26”W x 19-1/2”D x 24-1/4”H. Dimensions: 26”W x 19-1/2”D x 24-1/4”H.
Wt. 275 lbs. w/power pack Wt. 275 lbs. w/power pack

The crimping machines shown here will crimp 43 Series fittings on the hoses shown up to 1-1/4” I.D.

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0420-04 5/7/06 2:38 PM Page 1

426-06

PARKER FLUID CONNECTORS GROUP


43 Series No Skive Permanent Fittings
For Use with 421, 301, & 381 Hose and Crimping Machines on Preceding Page

10143 10643
Male Pipe JIC 37° Swivel

Part Tube Thread Hose Part Tube Thread Hose


Part Pipe Hose Part Pipe Hose Number Size Size I.D. Number Size Size I.D.
Number Thread I.D. Number Thread I.D. 10643-4-4 1/4 7/16 x 20 1/4 10643-10-10 5/8 7/8 x 14 5/8
10143-2-4 1/8 x 27 1/4 10143-6-10 3/8 x 18 5/8 10643-5-4 5/16 1/2 x 20 1/4 10643-12-10 3/4 1-1/16 x 12 5/8
10143-4-4 1/4 x 18 1/4 10143-8-10 1/2 x 14 5/8 10643-6-4 3/8 9/16 x 18 1/4 10643-8-12 1/2 3/4 x 16 3/4
10143-6-4 3/8 x 18 1/4 10143-12-10 3/4 x 14 5/8 10643-5-5 5/16 1/2 x 20 5/16 10643-10-12 5/8 7/8 x 14 3/4
10143-8-4 1/2 x 14 1/4 10143-8-12 1/2 x 14 3/4 10643-6-5 3/8 9/16 x 18 5/16 10643-12-12 3/4 1-1/16 x 12 3/4
10143-4-5 1/4 x 18 5/16 10143-12-12 3/4 x 14 3/4 10643-4-6 1/4 7/16 x 20 3/8 10643-14-12 7/8 1-3/16 x 12 3/4
10143-6-5 3/8 x 18 5/16 10143-16-12 1 x 11-1/2 3/4 10643-5-6 5/16 1/2 x 20 3/8 10643-16-12 1 1-5/16 x 12 3/4
10143-4-6 1/4 x 18 3/8 10143-12-16 3/4 x 14 1 10643-6-6 3/8 9/16 x 18 3/8 10643-12-16 3/4 1-1/16 x 12 1
10143-6-6 3/8 x 18 3/8 10143-16-16 1 x 11-1/2 1 10643-8-6 1/2 3/4 x 16 3/8 10643-16-16 1 1-5/16 x 12 1
10143-8-6 1/2 x 14 3/8 10143-20-20 1-1/4 x 11-1/2 1-1/4 10643-10-6 5/8 7/8 x 14 3/8 10643-20-16 1-1/4 1-5/8 x 12 1
10143-6-8 3/8 x 18 1/2 10143-24-24 1-1/2 x 11-1/2 1-1/2 10643-8-8 1/2 3/4 x 16 1/2 10643-16-20 1 1-5/8 x 12 1-1/4
10143-8-8 1/2 x 14 1/2 10143-32-32 2 x 11-1/2 2 10643-10-8 5/8 7/8 x 14 1/2 10643-20-20 1-1/4 1-5/8 x 12 1-1/4
10143-12-8 3/4 x 14 1/2 10643-12-8 3/4 1-1/16 x 12 1/2 10643-24-24 1-1/2 1-7/8 x 12 1-1/2
10643-8-10 1/2 3/4 x 16 5/8 10643-32-32 2 2-1/2 x 12 2

10343 10843
Male JIC 37° SAE 45° Swivel

Part Tube Thread Hose Part Tube Thread Hose Part Tube Thread Hose
Number Size Size I.D. Number Size Size I.D. Number Size Size I.D.
10343-4-4 1/4 7/16 x 20 1/4 10343-12-8 3/4 1-1/16 x 12 1/2 10843-6-4 3/8 5/8 x 18 1/4
10343-5-4 5/16 1/2 x 20 1/4 10343-10-10 5/8 7/8 x 14 5/8 10843-6-6 3/8 5/8 x 18 3/8
10343-6-4 3/8 9/16 x 18 1/4 10343-12-10 3/4 1-1/16 x 12 5/8 10843-12-8+ 3/4 1-1/16 x 14 1/2
10343-5-6 5/16 1/2 x 20 3/8 10343-12-12 3/4 1-1/16 x 12 3/4 10843-12-12 3/4 1-1/16 x 14 3/4
10343-6-6 3/8 9/16 x 18 3/8 10343-14-12 7/8 1-3/16 x12 3/4 +Non-standard product
10343-8-6 1/2 3/4 x 16 3/8 10343-16-12 1 1-5/16 x 12 3/4
1034310-6 5/8 7/8 x 14 3/8 10343-16-16 1 1-5/16 x 12 1
11143
10343-8-8 1/2 3/4 x 16 1/2 10343-20-20 1-1/4 1-5/8 x 12 1-1/4
10343-10-8 5/8 7/8 x 14 1/2
“Ferrul-Fix”
SAE Flareless
Part Tube Thread Hose
Number Size Size I.D.
10543
11143-4-4 1/4 7/16 x 20 1/4
Straight Thread O-Ring 11143-5-4 5/16 1/2 x 20 1/4
11143-4-6 1/4 7/16 x 20 3/8
11143-5-6 5/16 1/2 x 20 3/8
Part Tube Thread Hose Part Tube Thread Hose 11143-6-6 3/8 9/16 x 18 3/8
Number Size Size I.D. Number Size Size I.D.
11143-8-8 1/2 3/4 x 16 1/2
10543-4-4 1/4 7/16 x 20 1/4 10543-12-8 3/4 1-1/16 x 12 1/2 11143-10-8 5/8 7/8 x 14 1/2
10543-5-4 5/16 1/2 x 20 1/4 10543-10-10 5/8 7/8 x 14 5/8 11143-12-12 3/4 1-1/16 x 12 3/4
10543-6-4 3/8 9/16 x 18 1/4 10543-12-10 3/4 1-1/16 x 12 5/8
10543-6-6 3/8 9/16 x 18 3/8 10543-10-12 5/8 7/8 x 14 3/4
10543-8-6 1/2 3/4 x 16 3/8 10543-12-12 3/4 1-1/16 x 12 3/4 11243
10543-10-6 5/8 7/8 x 14 3/8 10543-16-12 1 1-5/16 x 12 3/4
SAE Flareless Swivel
10543-6-8 3/8 9/16 x 18 1/2 10543-16-16 1 1-5/16 x 12 1
10543-8-8 1/2 3/4 x 16 1/2 10543-20-20 1-1/4 1-5/8 x 12 1-1/4
10543-10-8 5/8 7/8 x 14 1/2 Part Tube Thread Hose
Number Size Size I.D.
11243-6-6 3/8 9/16 x 18 3/8
11243-8-6 1/2 3/4 x 16 3/8
11243-8-8 1/2 3/4 x 16 1/2
11243-20-20+ 1-1/4 1-5/8 x 12 1-1/4

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0421-04 5/7/06 2:42 PM Page 1

427-06

PARKER FLUID CONNECTORS GROUP

43 Series No Skive Permanent Fittings


For Use with 421, 301, & 381 Hose and Crimping Machines Shown Two Pages Earlier

11543 13743
SAE Code 61 JIC 37°
Flange Straight Swivel 45° Elbow

SAE SAE Part Tube Thread Hose Part Tube Thread Hose
Part Flange Hose Part Flange Hose Number Size Size I.D. Number Size Size I.D.
Number Size I.D. Number Size I.D.
13743-4-4 1/4 7/16 x 20 1/4 13743-10-8 5/8 7/8 x 14 1/2
11543-8-8 1/2 1/2 11543-24-20 1-1/2 1-1/4 13743-5-4 5/16 1/2 x 20 1/4 13743-10-10 5/8 7/8 x 14 5/8
11543-12-8 3/4 1/2 11543-32-20 2 1-1/4 13743-6-4 3/8 9/16 x 18 1/4 13743-12-10 3/4 1-1/16 x 12 5/8
11543-12-12 3/4 3/4 11543-24-24 1-1/2 1-1/2 13743-6-6 3/8 9/16 x 18 3/8 13743-12-12 3/4 1-1/16 x 12 3/4
11543-16-12 1 3/4 11543-32-24 2 1-1/2 13743-8-6 1/2 3/4 x 16 3/8 13743-16-16 1 1-5/16 x 12 1
11543-16-16 1 1 11543-24-32 1-1/2 2 13743-8-8 1/2 3/4 x 16 1/2 13743-20-20 1-1/4 1-5/8 x 12 1-1/4
11543-20-16 1-1/4 1 11543-32-32 2 2
11543-20-20 1-1/4 1-1/4

13943
11743 JIC 37°
SAE Code 61 Swivel 90° Elbow (Short)
Flange 45° Elbow

SAE SAE Part Tube Thread Hose Part Tube Thread Hose
Part Flange Hose Part Flange Hose Number Size Size I.D. Number Size Size I.D.
Number Size I.D. Number Size I.D. 13943-4-4 1/4 7/16 x 20 1/4 13943-10-8 5/8 7/8 x 14 1/2
11743-8-8 1/2 1/2 11743-20-20 1-1/4 1-1/4 13943-5-4 5/16 1/2 x 20 1/4 13943-12-8 3/4 1-1/16 x 12 1/2
11743-12-8 3/4 1/2 11743-24-20 1-1/2 1-1/4 13943-6-4 3/8 9/16 x 18 1/4 13943-10-10 5/8 7/8 x 14 5/8
11743-12-12 3/4 3/4 11743-20-24 1-1/4 1-1/2 13943-5-5 5/16 1/2 x 20 5/16 13943-12-10 3/4 1-1/16 x 12 5/8
11743-16-12 1 3/4 11743-24-24 1-1/2 1-1/2 13943-4-6 1/4 7/16 x 20 3/8 13943-12-12 3/4 1-1/16 x 12 3/4
11743-16-16 1 1 11743-32-24 2 1-1/2 13943-6-6 3/8 9/16 x 18 3/8 13943-16-12 1 1-5/16 x 12 3/4
11743-20-16 1-1/4 1 11743-32-32 2 2 13943-8-6 1/2 3/4 x 16 3/8 13943-16-16 1 1-5/16 x 12 1
13943-6-8 3/8 9/16 x 18 1/2 13943-20-20 1-1/4 1-5/8 x 12 1-1/4
13943-8-8 1/2 3/4 x 16 1/2

11943
SAE Code 61
Flange 90° Elbow
14143
JIC 37°
SAE SAE
Swivel 90° Elbow (Long)
Part Flange Hose Part Flange Hose
Number Size I.D. Number Size I.D.
11943-8-8 1/2 1/2 11943-20-16 1-1/4 1
11943-12-8 3/4 1/2 11943-20-20 1-1/4 1-1/4
11943-16-8 1 1/2 11943-24-20 1-1/2 1-1/4
11943-12-10 3/4 5/8 11943-20-24 1-1/4 1-1/2
Part Tube Thread Hose Part Tube Thread Hose
11943-12-12 3/4 3/4 11943-24-24 1-1/2 1-1/2 Number Size Size I.D. Number Size Size I.D.
11943-16-12 1 3/4 11943-32-24 2 1-1/2 14143-4-4 1/4 7/16 x 20 1/4 14143-10-10 5/8 7/8 x 14 5/8
11943-16-16 1 1 11943-32-32 2 2 14143-5-4 5/16 1/2 x 20 1/4 14143-12-12 3/4 1-1/16 x 12 3/4
14143-6-6 3/8 9/16 x 18 3/8 14143-14-12 7/8 1-3/16 x12 3/4
14143-8-6 1/2 3/4 x 16 3/8 14143-16-16 1 1-5/16 x 12 1
14143-8-8 1/2 3/4 x 16 1/2 14143-20-20 1-1/4 1-5/8 x 12 1-1-/4
14143-10-8 5/8 7/8 x 14 1/2

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0422-04 5/7/06 2:42 PM Page 1

428-06

PARKER FLUID CONNECTORS GROUP


30 Series Field Attachable Fittings
For Use with 301 and 381 Hose

20130 20630
Male Pipe NPTF SAE (JIC) 37° Swivel

Pipe Pipe Part Tube Thread Hose Part Tube Thread Hose
Part Thread Hose Part Thread Hose Number Size Size I.D. Number Size Size I.D.
Number Size inch Number Size inch 20630-4-4*~ 1/4 7/16 x 20 1/4 20630-12-10 3/4 1-1/16 x 12 5/8
20130-2-4 1/8 x 27 1/4 20130-8-10 1/2 x 14 5/8 20630-5-4 ~ 5/16 1/2 x 20 1/4 20630-10-12~ 5/8 7/8 x 14 3/4
20130-4-4 1/4 x 18 1/4 20130-12-8 3/4 x14 1/2 20630-4-6 ~ 1/4 7/16 x 20 3/8 20630-12-12 3/4 1-1/16 x 12 3/4
20130-4-6 1/4 x 18 3/8 20130-12-12 3/4 x 14 3/4 20630-6-6 3/8 9/16 x 18 3/8 20630-14-12 7/8 1-3/16 x 12 3/4
20130-6-4 3/8 x 18 1/4 20130-12-16 3/4 x 14 1 20630-8-6 ~ 1/2 3/4 x 16 3/8 20630-16-12 1 1-5/16 x 12 3/4
20130-6-6 3/8 x 18 3/8 20130-16-16 1 x 11-1/2 1 20630-8-8 ~ 1/2 3/4 x 16 1/2 20630-14-16 7/8 1-3/16 x 12 1
20130-6-8 3/8 x 18 1/2 20130-20-20 1-1/4 x 11-1/2 1-1/4 20630-10-8 ~ 5/8 7/8 x 14 1/2 20630-16-16 1 1-5/16 x 12 1
20130-8-6 1/2 x 14 3/8 20130-24-24 1-1/2 x 11-1/2 1-1/2 20630-12-8 3/4 1-1/16 x 12 1/2 20630-20-16 1-1/4 1-5/8 x 12 1
20130-8-8 1/2 x 14 1/2 20130-32-32 2 x 11-1/2 2 20630-8-10~+ 1/2 3/4 x 16 5/8 20630-20-20 1-1/4 1-5/8 x 12 1-1/4
20630-10-10~ 5/8 7/8 x 14 5/8
~These fittings are dual seated for both 37° and 45° flares.
*These fittings are available in 316 stainless steel; add C to the part number

20330
Male SAE (JIC) 37°
20830
SAE 45° Swivel
Part Tube Thread Hose Part Tube Thread Hose
Number Size Size I.D. Number Size Size I.D.
20330-4-4 1/4 7/16 x 20 1/4 20330-10-8 5/8 7/8 x 14 1/2 Part Tube Thread Hose
20330-5-4 5/16 1/2 x 20 1/4 20330-10-10 5/8 7/8 x 14 5/8 Number O.D. Size I.D.
20330-6-4 3/8 9/16 x 18 1/4 20330-12-12 3/4 1-1/16 x 12 3/4 20830-6-6 3/8 5/8 x 18 3/8
20330-6-6 3/8 9/16 x 18 3/8 20330-14-12 7/8 1-3/16 x 12 3/4
20330-8-6 1/2 3/4 x 16 3/8 20330-16-16 1 1-5/16 x 12 1
20330-8-8 1/2 3/4 x 16 1/2 20330-20-20 1-1/4 1-5/8 x 12 1-1/4
21130
SAE Flareless

20530
Part Tube Thread Hose Part Tube Thread Hose
SAE Straight Thread Number O.D. Size I.D. Number O.D. Size I.D.
O-Ring 21130-4-4 1/4 7/16 x 20 1/4 21130-8-8 1/2 3/4 x 16 1/2
21130-4-6 1/4 7/16 x 20 3/8 21130-10-8 5/8 7/8 x 14 1/2
21130-6-6 3/8 9/16 x 18 3/8 21130-12-12 3/4 1-1/16 x 12 3/4
Part Port Thread Hose Part Port Thread Hose 21130-8-6 1/2 3/4 x 16 3/8 21130-16-16 1 1-5/16 x 12 1
Number Size Size I.D Number Size Size I.D
20530-4-4 1/4 7/16 x 20 1/4 20530-8-8 1/2 3/4 x 16 1/2
20530-6-4. 3/8 9/16 x 18 1/4 20530-10-8 5/8 7/8 x 14 1/2
20530-6-6 3/8 9/16 x 18 3/8 20530-12-8 3/4 1-1/16 x 12 1/2 21230
20530-8-6 1/2 3/4 x 16 3/8 20530-12-12 3/4 1-1/16 x 12 3/4 SAE Flareless Swivel

Part Tube Thread Hose Part Tube Thread Hose


Number O.D. Size I.D. Number O.D. Size I.D.
21230-4-4 1/4 7/16 x 20 1/4 21230-10-10+ 5/8 7/8 x 14 5/8
21230-6-4+ 3/8 9/16 x 18 1/4 21230-10-12+ 5/8 7/8 x 14 3/4
21230-6-6 3/8 9/16 x 18 3/8 21230-12-12 3/4 1-1/16 x 12 3/4
21230-8-6 1/2 3/4 x 16 3/8 21230-14-12+ 7/8 1-3/16 x 12 3/4
21230-8-8 1/2 3/4 x 16 1/2 21230-16-16 1 1-5/16 x 12 1
21230-10-8 5/8 7/8 x 14 1/2 21230-20-20+ 1-1/4 1-5/8 x 12 1-1/4
21230-24-24+ 1-1/2 1-7/8 x 12 1-1/2
+ Non-standard product.

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0423-04 5/7/06 2:43 PM Page 1

429-06

PARKER FLUID CONNECTORS GROUP

30 Series Field Attachable Fittings


For Use with 301 and 381 Hose

21530
23730
SAE (Code 61)
SAE (JIC) 37°
Flange Head Straight
Swivel 45° Elbow
SAE SAE
Part Flange Hose Part Flange Hose
Number Size I.D. Number Size I.D. Part Tube Thread Hose Part Tube Thread Hose
21530-8-8 1/2 1/2 21530-20-20 1-1/4 1-1/4 Number Size Size I.D. Number Size Size I.D.
21530-12-8 3/4 1/2 21530-24-20 1-1/2 1-1/4 23730-4-4 1/4 7/16 x 20 1/4 23730-10-10 5/8 7/8 x 14 5/8
21530-12-12 3/4 3/4 21530-20-24 1-1/4 1-1/2 23730-6-6 3/8 9/16 x 18 3/8 23730-12-12 3/4 1-1/16 x 12 3/4
21530-16-12 1 3/4 21530-24-24 1-1/2 1-1/4 23730-8-8 1/2 3/4 x 16 1/2 23730-16-16 1 1-5/16 x 12 1
21530-20-12 1-1/4 3/4 21530-16-32 1 2 23730-10-8 5/8 7/8 x 14 1/2
21530-16-16 1 1 21530-32-32 2 2
21530-20-16 1-1/4 1

21730 23930
SAE (Code 61) Flange SAE (JIC) 37°
Head 45° Elbow Swivel 90° Elbow

SAE SAE
Part Flange Hose Part Flange Hose Part Tube Thread Hose Part Tube Thread Hose
Number Size Size I.D. Number Size Size I.D.
Number Size I.D. Number Size I.D.
23930-4-4 1/4 7/16 x 20 1/4 23930-10-10 5/8 7/8 x 14 5/8
21730-12-8 3/4 1/2 21730-20-20 1-1/4 1-1/4
23930-6-6 3/8 9/16 x 18 3/8 23930-12-12 3/4 1-1/16 x 12 3/4
21730-12-12 3/4 3/4 21730-24-20 1-1/2 1-1/4
23930-8-6 1/2 3/4 x 16 3/8 23930-16-16 1 1-5/16 x 12 1
21730-16-12 1 3/4 21730-24-24 1-1/2 1-1/2
23930-8-8 1/2 3/4 x 16 1/2 23930-20-20 1-1/4 1-5/8 x 12 1-1/4
21730-16-16 1 1 21730-32-32 2 2
23930-10-8 5/8 7/8 x 14 1/2
21730-20-16 1-1/4 1

21930 24130
SAE (Code 61) Flange SAE (JIC) 37°
Head 90° Elbow Swivel 90° Elbow (Long)

SAE SAE
Part Flange Hose Part Flange Hose
Number Size I.D. Number Size I.D. Part Tube Thread Hose Part Tube Thread Hose
21930-8-8 1/2 1/2 21930-20-16 1-1/4 1 Number Size Size I.D. Number Size Size I.D.
21930-12-8 3/4 1/2 21930-20-20 1-1/4 1-1/4 24130-4-4 1/4 7/16 x 20 1/4 24130-10-8 5/8 7/8 x 14 1/2
21930-12-12 3/4 3/4 21930-24-20 1-1/2 1-1/4 24130-6-4 3/8 9/16 x 18 1/4 24130-10-10 5/8 7/8 x 14 5/8
21930-16-12 1 3/4 21930-24-24 1-1/2 1-1/2 24130-6-6 3/8 9/16 x 18 3/8 24130-12-12 3/4 1-1/16 x 12 3/4
21930-20-12 1-1/4 3/4 21930-32-32 2 2 24130-8-6 1/2 3/4 x 16 3/8 24130-16-16 1 1-5/16 x 12 1
21930-16-16 1 1 24130-8-8 1/2 3/4 x 16 1/2

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0424-04 5/7/06 2:43 PM Page 434

430-06

PARKER FLUID CONNECTORS GROUP


Max. Standard Max. Min. Min. Weight
Hose Hose PTFE Wall Working Burst Bend per
Part I.D. O.D. Thickness Pressure Pressure Radius 100 ft.
Number in. in. in. psi psi in. lbs.
PTFE 919/919B Hose with Stainless Steel Wire Braid
Construction: Meets or exceeds all requirements of SAE 100 R14. #
Inner tube of FDA approved extruded PTFE with 304 stainless steel wire 919-3 1/8 1/4 .030 3000 12,000 1.5 3.8
braid outer cover. 919-4 3/16 5/16 .030 3000 12,000 2.0 5.98
Applications: Maximum working pressures at 75°F are 625 to 3000 psi
919/919B-5 1/4 3/8 .030 3000 12,000 3.0 8.55
(depending on size). Service temperature range is -100°F to +450°F
919/919B-6 5/16 7/16 .030 2500 10,000 4.0 10.25
(-73°C to +232°C). Natural tube is FDA compliant for food contact
applications. 919/919B-8 13/32 17/32 .030 2000 8000 5.0 12.63
Steam Service: Maximum for steam is 200 psi at +388°F. 919-10 1/2 5/8 .030 1500 6000 6.5 14.85
Vacuum Service: 28 inches of Hg sizes -4 through -10; 12 inches of Hg 919-12 5/8 3/4 .030 1200 4800 7.5 18.63
size -12; 14 inches of Hg size -16; 10 inches of Hg size -20. 919-16 7/8 1-1/32 .035 1000 4000 9.0 26.79
Fittings: 91N Series permanent fittings or 90 Series reusable fittings. 919-20 1-1/8 1-9/32 .042 625 2500 16.0 38.76
Note: 91 Series permanent fittings are required on size -3 and -20 hose. Change in length at working pressure is ±2% to -4%.
For a black, static dissipative core tube, add suffix “B”; i.e. 919B-4.
Use the black core tube when conveying non-conductive fluids such as oils, paints, fuels,
steam, etc.

PTFE 919U Hose with Stainless Steel Wire Braid Max. Standard Max. Min. Min. Weight
and Black Urethane Cover Hose Hose PTFE Wall Working Burst Bend per
Part I.D. O.D. Thickness Pressure Pressure Radius 100 ft.
Construction: Meets or exceeds all requirements of SAE 100R14. Number in. in. in. psi psi in. lbs.
Inner tube of FDA approved extruded PTFE with 304 stainless steel wire
braid reinforcement and a weather and abrasion resistant black
elastomeric cover (.028" thick). #
Applications: Maximum working pressures at 75°F are 1000 to 3000 psi 919U-4 3/16 3/8 .030 3000 12,000 2.0 8.4
(depending on size). Service temperature range is -40°F to +275°F 919U-6 5/16 1/2 .030 2500 10,000 4.0 13.2
(-40°C to +135°C). FDA compliant tube for food contact applications. 919U-8 13/32 5/8 .030 2000 8000 5.0 15.0
Vacuum Service: 28 inches of Hg sizes -4 through -10; 12 inches of Hg
919U-12 5/8 27/32 .030 1200 5000 7.5 22.1
size -12; 14 inches of Hg size -16.
919U-16 7/8 1-1/16 .035 1000 4000 9.0 31.4
Fittings: 91N Series. Permanently attached fittings only. Cover must
be skived prior to fitting attachment. Change in length at working pressure is ±2% to -4%.
For non-standard cover colors, please specify when ordering.

Max. Standard Max. Min. Min. Weight


Hose Hose PTFE Wall Working Burst Bend per
High Performance Heavy Wall 929/929B Hose Part I.D. O.D. Thickness Pressure Pressure Radius 100 ft.
Number in. in. in. psi psi in. lbs.
with Stainless Steel Wire Braid
Construction: Inner tube of FDA approved extruded PTFE with 304
stainless steel wire braid outer cover. Heavy PTFE wall allows tighter #
bend radius and less permeation. 929/929B-4 3/16 5/16 .040 3000 12,000 1.5 8.00
Applications: Maximum working pressures at 75°F are 1200 to 3000 psi
929/929B-6 5/16 7/16 .040 2500 10,000 3.5 12.07
(depending on size). Service temperature range is -100°F to +450°F
929/929B-8 13/32 9/16 .042 2000 8000 4.5 15.67
(-73°C to +232°C). Natural tube is FDA compliant for food contact
applications. 929/929B-12 5/8 3/4 .048 1200 4800 6.5 18.6
Steam Service: Maximum for steam is 200 psi at +388°F. 929/929B-16 7/8 1-1/8 .048 1250 5000 7.4 48.8
Vacuum Service: 28 inches of Hg sizes -4 through -8; 12 inches of Hg Change in length at working pressure is ±2% to -4%.
size -12; 14 inches of Hg size -16. For a black, static dissipative core tube, add suffix “B”; i.e. 929B-4.
Fittings: 91N Series stainless permanently attached fittings only. Use the black core tube when conveying non-conductive fluids such as oils, paints, fuels,
steam, etc.

Max. Standard Max. Min. Min. Weight


Hose Hose PTFE Wall Working Burst Bend per
Part I.D. O.D. Thickness Pressure Pressure Radius 100 ft.
High Performance Heavy Wall 929BJ Hose Number in. in. in. psi psi in. lbs.
with Stainless Steel Wire Braid and Brown Silicone Cover
Construction: Smooth inner tube of extruded PTFE with 304 stainless #
steel wire braid reinforcement and brown silicone cover.
Applications: Maximum working pressures at 75°F are 1200 to 3000 psi 929BJ-4 3/16 0.58 .040 3000 12,000 2.0 17.0
(depending on size). Service temperature range is -65°F to +450°F 929BJ-5 1/4 0.63 .040 2500 10,000 2.0 19.4
(-54°C to +232°C). 929BJ-6 5/16 0.69 .040 2500 10,000 4.0 23.2
Steam Service: Maximum for steam is 200 psi at +388°F. 929BJ-8 13/32 0.79 .042 2000 8000 4.6 28.8
Vacuum Service: 28 inches of Hg sizes -4 through -8; 12 inches of Hg 929BJ-10 1/2 0.91 .042 1750 7000 5.5 35.1
size -12; 14 inches of Hg size -16. 929BJ-12 5/8 1.04 .042 1200 4800 6.5 40.3
Fittings: 91N Series. Permanently attached fittings only. Cover must be 929BJ-16 7/8 1.36 .042 1250 5000 7.4 78.2
skived prior to fitting attachment. Change in length at working pressure is ± 2% to -4%.

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0425-04 5/7/06 2:58 PM Page 435

431-06

PARKER FLUID CONNECTORS GROUP


Nom. Max. Max. Min. Min. Weight
Hose Hose Working Burst Bend Vacuum per
Part I.D. O.D. Pressure Pressure Radius Rating 100 ft.
Number in. in. psi psi in. in./Hg lbs.

#
936 Polyester Braided Convoluted PTFE Hose 936/936B-8 1/2 0.86 250 1000 1.00 28 10.20
936B with Conductive PTFE Liner 936/936B-10 5/8 0.96 250 1000 1.50 28 13.80
Construction: Convoluted PTFE core tube with a single layer of 936/936B-12 3/4 1.12 250 1000 2.00 28 19.00
polyester reinforcement. 936B has a black conductive liner for 936/936B-16 1 1.42 250 1000 3.00 28 22.80
applications requiring static dissipation. 936/936B-20 1-1/4 1.80 200 800 4.00 20* 34.40
936/936B-24 1-1/2 2.05 125 500 5.00 12* 37.20
Applications: For use in chemical transfer, low-pressure fuel,
936/936B-32 2 2.60 125 500 7.50 5* 47.50
and various processing applications.
Not recommended for steam-cold water cycling applications. *28 in/Hg can be obtained by using 2799 internal spring guard.
Operating Temperature: -65°F to +275°F (-54°C to +135°C). For a black, static dissipative core tube, add suffix “B”; i.e., 936B-8.
Use the black core tube when conveying non-conductive fluids such as oils, paints, fuels,
Fittings: Crimped 93N Series fittings only.
steam, etc.

Nom. Max. Min. Min. Weight


Hose Hose Working Burst Bend Vacuum per
Part I.D. O.D. Pressure Pressure Radius Rating 100 ft.
Number in. in. psi psi in. in./Hg lbs.

939 Convoluted PTFE Hose


#
with Stainless Steel Wire Braid 939/939B-4 1/4 0.47 2000 8000 1.25 28 8.40
939/939B-6 3/8 0.59 1500 6000 2.25 28 12.00
939B with Conductive PTFE Liner 939/939B-8 1/2 0.79 1350 5400 2.88 28 21.10
Construction: Convoluted PTFE tube with a single layer of 304 939/939B-10 5/8 0.88 1000 4000 3.00 28 24.00
stainless steel wire braided reinforcement. 939B has a black 939/939B-12 3/4 1.09 1100 4400 3.75 28 31.60
conductive liner for applications requiring static dissipation. 939/939B-16 1 1.33 1000 4000 5.00 28 45.10
Applications: Chemical transfer and various processing 939/939B-20 1-1/4 1.75 1000 4000 6.25 20* 69.70
applications. 939/939B-24 1-1/2 2.05 750 3000 7.50 12* 79.50
Not recommended for steam-cold water cycling applications. 939/939B-32 2 2.56 250 1000 10.00 5* 101.00
Operating Temperature: -100°F to +450°F (-73°C to +232°C). •28 in/Hg can be obtained by using 2799 internal spring guard.
Maximum for steam is 200 psi at +388°F. For a black, static dissipative core tube, add suffix “B”; i.e., 939B-4.
Fittings: Crimped 93N Series fittings only. Factory made Use the black core tube when conveying non-conductive fluids such as oils, paints, fuels,
assemblies only sizes -4 and -6. steam, etc.

Nom. Max. Max. Min. Min. Weight


Hose Hose Std. Working Burst Bend Vacuum per
943B High Pressure Smooth Bore PTFE Hose Part I.D. O.D. Wall Pressure Pressure Radius Rating 100 ft.
Construction: Extruded smooth bore, conductive black PTFE Number in. in. in. psi psi in. in./Hg lbs.
tube with lightweight stainless wire braided reinforcement.
Applications: For use in hydraulic systems requiring high #
pressures and temperatures.
Not recommended for steam-cold water cycling applications. 943B-6 5/16 0.49 .040 3000 14,000 2.50 28 17.5
Operating Temperature: -100°F to +450°F (-73°C to +232°C). 943B-8 13/32 0.62 .045 3000 14,000 2.88 28 23.5
Maximum for steam is 200 psi at +388°F. 943B-10 1/2 0.73 .051 3000 12,000 3.25 28 26.4
Fittings: Factory crimped 94 Series fittings only. 943B-12 5/8 0.99 .051 3000 12,000 4.00 28 66.0
943B-16 7/8 1.39 .051 3000 12,000 5.00 14 150.0
Change in length at working pressure is ±2%.

960/960W Smooth Bore FEP Hose Nom. Max. Max. Min. Min. Weight
Hose Hose Working Burst Vacuum Bend per
Construction: Core tube of white, FDA compliant FEP material Part I.D. O.D. Pressure Pressure Rating Radius 100 ft.
(.03” thick) reinforced with helical wrapped wire for full vacuum Number in. in. psi psi in./Hg in. lbs.
support. Blue rubber cover for resistance to abrasion, ozone,
and weathering. 960W hose with a gray FDA compliant rubber
cover, steam cleanable.
#
Applications: For use in transfer of various chemicals, 960/960W-8 1/2 .95 500 2000 30 3.00 0.35
foodstuffs, pharmaceuticals, reagents, solvents, and wastes. 960/960W-12 3/4 1.26 500 2000 30 6.00 0.62
Operating Temperature: -40°F to +300°F (-40°C to +149°C). 960/960W-16 1 1.69 450 1800 30 9.00 0.75
Pressure rating must be reduced 1% for every 2°F above 212°F 960/960W-20 1-1/4 1.94 375 1500 30 11.00 0.98
(100°C). 960/960W-24 1-1/2 2.25 375 1500 30 12.00 1.20
Fittings: Crimped 96N Series fittings only. 960/960W-32 2 2.53 300 1200 30 16.00 1.50

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0424-05 5/7/06 2:59 PM Page 1

432-06

PARKER FLUID CONNECTORS GROUP


Brass Ball Valves Series 500
Style Type Material Size Options Style Type Material Size
V 500 P -4 -00 L
V 500 P -20 H
V-Valve
V-Valve
VP-Valve, Padlocking Handle Style B HEX N
Style VP-Valve, Padlocking Handle
VV-Valve, Vented ON
VVP-Valve, Vented, Padlocking Handle Type 500-Female/Female PTF Ports
OFF
Type 500-Female/Female PTF Ports
D
Material P- Brass
P- Brass 20-1 1/4" C
Material
PN-Nickel Plated Size 24-1 1/2" HEX M
32-2"
4-1/4"
6-3/8" Locking Handle, Female Pipe Ends XVP500P
Size 8-1/2" PART PIPE B C D
12-3/4"
16-1" NO. THREAD HEX HEX H L M N FLOW Ø
01-Stainless Steel Ball & Stem
XVP500P-4 1/4 15/16 15/16 3.96 4.90 2.03 2.47 .375
02-Stainless Steel Handle & Nut XVP500P-6 3/8 15/16 15/16 3.96 4.90 2.03 2.47 .375
03-Stainless Steel Ball, Stem, Handle & Nut XVP500P-8 1/2* 1-1/16 1-1/16 3.96 5.00 2.20 2.58 .500
Options
04-Tee Handle
08-Unmarked Yellow Vinyl Handle Cover XVP500P-12 3/4** 1-1/4 1-5/16 3.96 5.25 2.42 2.81 .685
21-Oval Handle XVP500P-16 1** 1-1/2 1-9/16 3.96 5.34 2.75 3.08 .875
For use with 5/16" Ø shank lock; .33 Ø
L XVP500P-20 1-1/4 1-15/16 1-15/16 6.22 8.05 3.66 4.04 1.180
H
XVP500P-24 1-1/2 2-1/8 2-1/8 6.22 8.23 4.02 4.52 1.500
XVP500P-32 2 2-11/16 2-11/16 6.22 8.60 4.76 5.07 1.890
For use with 9/32" Ø shank lock; .31 Ø
B HEX N

D
L
H
C
M B HEX N
HEX
Female-Female Pipe Ends PIPE XV500P D
ON

PIPE OFF

PART THREAD B C FLOW C


HEX M
NO. [PTF] HEX HEX H L M N DIA.D
XV500P-4 1/4 15/16 15/16 3.96 4.90 2.03 2.47 .375
XV500P-6 3/8 15/16 15/16 3.96 4.90 2.03 2.47 .375 OSHA 29 CFR Part 1910 Vented, Locking Handle, Female Pipe Ends XVVP500P
XV500P-8 1/2* 1-1/16 1-1/16 3.96 5.00 2.20 2.58 .500 PART PIPE B C D
XV500P-12† 3/4** 1-1/4 1-5/16 3.96 5.25 2.42 2.81 .685 NO. THREAD HEX HEX K H L M N FLOW Ø
XV500P-16 †
1** 1-1/2 1-9/16 3.96 5.34 2.75 3.08 .875 XVVP500P-4 1/4 15/16 15/16 1.11 3.96 4.90 2.03 2.47 .375

Available in Full Flow Panel Mount see XV508P Series XVVP500P-6 3/8 15/16 15/16 1.11 3.96 4.90 2.03 2.47 .375
XVVP500P-8 1/2* 1-1/16 1-1/16 1.23 3.96 5.00 2.20 2.58 .500
L XVVP500P-12 3/4** 1-1/4 1-5/16 1.45 3.96 5.25 2.42 2.81 .685
H XVVP500P-16 1** 1-1/2 1-9/16 1.58 3.96 5.34 2.75 3.08 .875
For use with 5/16" Ø shank lock
C-Octagon
B-Octagon N L
H

D
B
HEX
N
M D
Female-Female Pipe Ends XV500P-20, XV500P-24, XV500P-32
C
PIPE HEX M
PART THREAD FLOW
Tee Handle, Female Pipe Ends XV500P-X-04
NO. [PTF] OCTAGON H L M N DIA.D
PART PIPE B C D
XV500P-20 1-1/4 1.93 6.22 8.05 3.66 3.01 1.18
NO. THREAD HEX HEX H L M N FLOW Ø
XV500P-24 1-1/2 2.13 6.22 8.23 4.02 3.25 1.50
XV500P-4-04 1/4 15/16 15/16 1.25 2.50 2.03 1.87 .375
XV500P-32 2 2.69 6.22 8.58 4.76 3.52 1.89
XV500P-6-04 3/8 15/16 15/16 1.25 2.50 2.03 1.87 .375
XV500P-8-04 1/2* 1-1/16 1-1/16 1.25 2.50 2.20 1.98 .500
L XV500P-12-04 3/4** 1-1/4 1-5/16 1.25 2.50 2.42 2.20 .685
H
XV500P-16-04 1** 1-1/2 1-9/16 1.25 2.50 2.75 2.48 .875

B HEX N
L
H
D
B
C 10-32 UNF-2B HEX
HEX K (ALL SIZES)
M N
D
Vented, Female Pipe Ends XVV500P
PART PIPE B C D C
HEX M
NO. THREAD HEX HEX K H L M N FLOW Ø
XVV500P-4 1/4 15/16 15/16 1.11 3.96 4.90 2.03 2.47 .375 Oval Handle, Female Pipe Ends XV500P-X-21
XVV500P-6 3/8 15/16 15/16 1.11 3.96 4.90 2.03 2.47 .375 PART PIPE B C D
XVV500P-8 1/2* 1-1/16 1-1/16 1.23 3.96 5.00 2.20 2.58 .500 NO. THREAD HEX HEX H L M N FLOW Ø
XVV500P-12 3/4** 1-1/4 1-5/16 1.45 3.96 5.25 2.42 2.81 .685 XV500P-4-21 1/4 15/16 15/16 1.74 3.49 2.03 2.38 .375
XVV500P-16 1** 1-1/2 1-9/16 1.58 3.96 5.34 2.75 3.08 .875 XV500P-6-21 3/8 15/16 15/16 1.74 3.49 2.03 2.38 .375
XV500P-8-21 1/2* 1-1/16 1-1/16 1.74 3.49 2.20 2.49 .500
XV500P-12-21 3/4** 1-1/4 1-5/16 1.74 3.48 2.42 2.71 .685
XV500P-16-21 1** 1-1/2 1-9/16 1.74 3.48 2.75 2.99 .875

*PTF special short. **PTF special extra short.

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0425-05 5/7/06 2:59 PM Page 1

433-06

PARKER FLUID CONNECTORS GROUP


Stainless Steel Ball Valves Series 502
Style Type Material Size Options Flow data 502SS
V 502 SS -4 -00 VALVE
SIZE CV
V-Valve
Style 1/4 4.0
VP-Valve, Padlocking Handle
3/8 6.0
Type 502-Panel Mount Female/Female PTF Ports
1/2 14.0
Material SS-Stainless Steel 3/4 35.0
1 54.0
4-1/4" 16-1"
1-1/4 74.0
6-3/8" 20-1 1/4"
Size
8-1/2" 24-1 1/2" 1-1/2 120.0
12-3/4" 32-2"
2 226.0

20-Short Handle
Options 21-Oval Handle
35-Welded Retainer Nut

L
H L
H
10-24 UNC 2B

B HEX N B
HEX
G
N
D D

C C
HEX M HEX M

Female Pipe Ends, Panel Mount XV502SS Short Handle, Female Pipe Ends, Panel Mount XV502SS-X-20
PIPE PIPE
PART THREAD B/C FLOW PART THREAD B/C FLOW
NO. (NPT) HEX F G H L M N DIA. D NO. (NPT) HEX G H L M N DIA. D
XV502SS-4 1/4 15/16 .500 1.125 4.00 5.03 2.07 2.52 .380 XV502SS-4-20 1/4 15/16 1.12 2.28 3.32 2.07 2.53 .375
XV502SS-6 3/8 15/16 .500 1.125 4.00 5.03 2.07 2.52 .380 XV502SS-6-20 3/8 15/16 1.12 2.28 3.32 2.07 2.53 .375
XV502SS-8 1/2 1-1/16 .500 1.125 4.00 5.13 2.27 2.65 .500 XV502SS-8-20 1/2 1-1/16 1.12 2.22 3.37 2.25 2.63 .500
XV502SS-12 3/4 1- 3/8 .875 1.375 5.00 6.67 3.35 3.46 .790
XV502SS-16 1 1- 5/8 .875 1.375 5.00 6.77 3.54 3.74 1.000
XV502SS-20 1-1/4 2 1.000 1.500 7.00 9.00 4.00 4.55 1.250
XV502SS-24 1-1/2 2-3/8 1.000 1.500 7.00 7.19 4.38 5.42 1.500
XV502SS-32 2 3 1.000 1.500 7.00 9.75 5.50 5.68 2.000

.32Ø
L
H 10-24 UNC 2B

B HEX N
B
HEX G
D
N
D
C
HEX M C
HEX M

Locking Handle, Female Pipe Ends, Panel Mount XVP502SS Oval Handle, Female Pipe Ends, Panel Mount XV502SS-X-21
PIPE PIPE
PART THREAD B/C FLOW PART THREAD B/C FLOW
NO. (NPT) HEX F G H L M N DIA. D NO. (NPT) HEX G H L M N DIA. D
XVP502SS-4 1/4 15/16 .500 1.125 4.00 5.03 2.07 2.52 .380 XV502SS-4-21 1/4 15/16 1.125 1.74 3.48 2.07 2.43 .380
XVP502SS-6 3/8 15/16 .500 1.125 4.00 5.03 2.07 2.52 .380 XV502SS-6-21 3/8 15/16 1.125 1.74 3.48 2.07 2.43 .380
XVP502SS-8 1/2 1-1/16 .500 1.125 4.00 5.13 2.27 2.65 .500 XV502SS-8-21 1/2 1-1/16 1.125 1.74 3.49 2.25 2.54 .500
XVP502SS-12 3/4 1-3/8 .875 1.375 5.00 6.67 3.35 3.46 .790 XV502SS-12-21 3/4 1-3/8 1.375 2.68 5.36 3.35 3.45 .790
XVP502SS-16 1 1-5/8 .875 1.375 5.00 6.77 3.54 3.74 1.000 XV502SS-16-21 1 1-5/8 1.375 2.68 5.36 3.54 3.74 1.000
XVP502SS-20 1-1/4 2 1.000 1.500 7.00 9.00 4.00 4.55 1.250 XV502SS-20-21 1-1/4 2 1.500 3.27 6.53 4.00 4.54 1.250
XVP502SS-24 1-1/2 2-3/8 1.000 1.500 7.00 7.19 4.38 5.42 1.500 XV502SS-24-21 1-1/2 2-3/8 1.500 3.27 6.53 4.38 4.93 1.500
XVP502SS-32 2 3 1.000 1.500 7.00 9.75 5.50 5.68 2.000 XV502SS-32-21 2 3 1.500 3.27 6.53 5.50 5.67 2.000

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
New 426 5/7/06 3:00 PM Page 1

434-06

PARKER FLUID CONNECTORS GROUP


SAE 45° Flared Brass Tube Fittings
Refrigerant Drum Adapter 1F Short Nut 41FS/Shorter Nut 41FX Female Connector 46F
REF. SAE 010165 REF. SAE 010110 REF. SAE 010103
PART TUBE PIPE PART TUBE STRGHT PART TUBE PIPE STRGHT
NO. O.D. THD NO. SIZE THD NO. SIZE THD THD
1F-4-8 1/4 1/2 41FS-2 1/8 5/16-24 46F-2-2 1/8 1/8 5/16-24
1F-4-12* 1/4 3/4 41FS-3 3/16 3/8-24 46F-3-2 3/16 1/8 3/8-24
1F-6-12* 3/8 3/4 41FS-4 1/4 7/16-20 46F-4-2 1/4 1/8 7/16-20
1F-8-12* 1/2 3/4 41FS-5 5/16 1/2-20 46F-4-4 1/4 1/4 7/16-20
Gasket furnished with each 1F adapter 41FS-6 3/8 5/8-18 46F-4-6 1/4 3/8 7/16-20
41FX-6 3/8 5/8-18 46F-5-2 5/16 1/8 1/2-20
Copper Flare Gasket 2GF 41FS-7 7/16 11/16-16 46F-5-4 5/16 1/4 1/2-20
REF. SAE 010113 41FS-8 1/2 3/4-16 46F-6-2 3/8 1/8 5/8-18
PART TUBE 41FX-8 1/2 3/4-16 46F-6-4 3/8 1/4 5/8-18
NO. SIZE A 41FS-10 5/8 7/8-14 46F-6-6 3/8 3/8 5/8-18
2GF-3 3/16 .32 41FX-10 5/8 7/8-14 46F-6-8 3/8 1/2 5/8-18
2GF-4 1/4 .36 41FS-12 3/4 1-1/16-14 46F-8-4 1/2 1/4 3/4-16
2GF-5 5/16 .43 41FX-12* 3/4 1-1/16-14 46F-8-6 1/2 3/8 3/4-16
2GF-6 3/8 .56 41FS-14 7/8 1-1/4-12 46F-8-8 1/2 1/2 3/4-16
2GF-8 1/2 .67 46F-8-12* 1/2 3/4 3/4-16
2GF-10 5/8 .78 46F-10-6 5/8 3/8 7/8-14
2GF-12* 3/4 .97 46F-10-8 5/8 1/2 7/8-14
Reducing Nuts 41FS 46F-10-12* 5/8 3/4 7/8-14
Seal Bonnet 3GF
PART TUBE STRGHT
REF. SAE 010114 NO. SIZE THD
PART TUBE 41FS-6-4 3/8 to 1/4 5/8-18 Male Connector 48F
NO. SIZE A
41FS-8-6 1/2 to 3/8 3/4-16 REF. SAE 010102
3GF-3 3/16 .32 41FS-10-8 5/8 to 1/2 7/8-14 PART TUBE PIPE STRGHT
3GF-4 1/4 .37 NO. SIZE THD THD
3GF-5 5/16 .43 48F-2-2 1/8 1/8 5/16-24
3GF-6 3/8 .56
48F-3-2 3/16 1/8 3/8-24
3GF-8 1/2 .67
3GF-10 5/8 .78 48F-3-4 3/16 1/4 3/8-24
3GF-12* 3/4 .97 Union 42F 48F-4-2 1/4 1/8 7/16-20
REF. SAE 010101 48F-4-4 1/4 1/4 7/16-20
Long Forged Nut 14 FL PART TUBE STRGHT 48F-4-6 1/4 3/8 7/16-20
REF. SAE 010167 NO. SIZE THD 48F-4-8 1/4 1/2 7/16-20
PART TUBE STRGHT 42F-2 1/8 5/16-24 48F-5-2 5/16 1/8 1/2-20
NO. SIZE THD 42F-3 3/16 3/8-24 48F-5-4 5/16 1/4 1/2-20
14FL-4 1/4 7/16-20 42F-4 1/4 7/16-20 48F-5-6 5/16 3/8 1/2-20
14FL-6 3/8 5/8-18 42F-5 5/16 1/2-20 48F-6-2 3/8 1/8 5/8-18
14FL-8 1/2 3/4-16 42F-6 3/8 5/8-18 48F-6-4 3/8 1/4 5/8-18
14FL-10 5/8 7/8-14 42F-8 1/2 3/4-16
48F-6-6 3/8 3/8 5/8-18
42F-10 5/8 7/8-14
Short Forged Nut 14FSX 42F-12* 3/4 1-1/16-14 48F-6-8 3/8 1/2 5/8-18
REF. SAE 010166 42F-14* 7/8 1-1/4-12 48F-6-12* 3/8 3/4 5/8-18
PART TUBE STRGHT 48F-8-4 1/2 1/4 3/4-16
NO. SIZE THD 48F-8-6 1/2 3/8 3/4-16
14FSX-4 1/4 7/16-20 48F-8-8 1/2 1/2 3/4-16
14FSX-5 5/16 1/2-20 48F-8-12 1/2 3/4 3/4-16
14FSX-6 3/8 5/8-18 48F-10-4 5/8 1/4 7/8-14
14FSX-8 1/2 3/4-16 Union Reducers 42F
48F-10-6 5/8 3/8 7/8-14
14FSX-10 5/8 7/8-14 REF. SAE 010101 48F-10-8 5/8 1/2 7/8-14
14FSX-12* 3/4 1-1/16-14 PART TUBE SIZE STRGHT THD
NO. 1 2 1 2 48F-10-12* 5/8 3/4 7/8-14
Short Forged Reducing Nuts 14FS 42F-6-4 1/4 3/8 7/16-20 5/8-18 48F-12-8* 3/4 1/2 1-1/16-14
PART TUBE STRGHT 42F-6-5 5/16 3/8 1/2-20 5/8-18 48F-12-12* 3/4 3/4 1-1/16-14
NO. SIZE THD
42F-8-4 1/4 1/2 7/16-20 3/4-16 48F-14-12* 7/8 3/4 1-1/4-12
14FS-6-4 3/8 to 1/4 5/8-18
42F-8-6 3/8 1/2 5/8-18 3/4-16
14FS-8-6 1/2 to 3/8 3/4-16
42F-10-6 3/8 5/8 5/8-18 7/8-14
14FS-10-8 5/8 to 1/2 7/8-14
42F-10-8 1/2 5/8 3/4-16 7/8-14 Flare to Metric Adapter 48F-X-MIX
Swivel Nut Valve Connector 14FSV PART TUBE METRIC
NUMBER SIZE THD
REF. SAE 010108 48F-8-M116 1/2 M16 x 1.5
PART TUBE STRGHT 48F-10-M127 5/8 M27 x 2.0
NO. SIZE THD
48F-12-M127* 3/4 M27 x 2.0
14FSV-4 1/4 7/16-20 Flare to Solder 43F Note: Viton o-ring is standard
14FSV-6 3/8 5/8-18 REF. SAE 010104
14FSV-8 1/2 3/4-16 PART TUBE SOLDER STRGHT Flare to SAE Straight Thread 485F
14FSV-10 5/8 7/8-14 NO. SIZE OD THD PART TUBE STRAIGHT
43F-4-4 1/4 1/4 7/16-20 NUMBER SIZE THD

;;
Flare Adapter US5 43F-4-5 1/4 5/16 7/16-20 485F-12-8* 3/4 3/4-16
PART TUBE STRGHT 485F-12-12* 3/4 1-1/16-12
43F-4-6 1/4 3/8 7/16-20

;;
NO. SIZE THD
US5-4 1/4 7/16-20 43F-6-4 3/8 1/4 5/8-18 Union Tee 144F-244F
US5-6 3/8 5/8-18 43F-6-5 3/8 5/16 5/8-18
43F-6-6 3/8 3/8 5/8-18 REF. SAE 010401
US5-8 1/2 3/4-16 144F PART TUBE STRGHT
US5-10 5/8 7/8-14 43F-6-8 3/8 1/2 5/8-18
NO. SIZE THD
43F-6-10 3/8 5/8 5/8-18
144F-3 3/16 3/8-24
Long Nut 41FL 43F-8-6 1/2 3/8 3/4-16
144F-4 1/4 7/16-20
REF. SAE 010111 43F-8-8 1/2 1/2 3/4-16
244F-4 1/4 7/16-20
PART TUBE STRGHT 43F-8-10 1/2 5/8 3/4-16 244F
144F-5 5/16 1/2-20
NO. SIZE THD 43F-10-8 5/8 1/2 7/8-14
144F-6 3/8 5/8-18

;;
41FL-2 1/8 5/16-24 43F-10-10 5/8 5/8 7/8-14
144F-8 1/2 3/4-16
41FL-3 3/16 3/8-24 43F-10-12* 5/8 3/4 7/8-14
144F-10 5/8 7/8-14

;;
41FL-4 1/4 7/16-20 43F-10-14* 5/8 7/8 7/8-14
41FL-5 5/16 1/2-20 43F-12-12* 3/4 3/4 1-1/16-14 Union Tee 144F-244F combination sizes
41FL-6 3/8 5/8-18 43F-12-14* 3/4 7/8 1-1/16-14 PART 1 TUBE 2 TUBE 3 TUBE
41FL-8 1/2 3/4-16 NO. SIZE SIZE SIZE
41FL-10 5/8 7/8-14 144F-6-6-4 3/8 3/8 1/4
41FL-12* 3/4 1-1/16-14 *Comes standard with thread protectors 144F-8-8-6 1/2 1/2 3/8

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
New 427 5/12/06 1:48 AM Page 1

435-06

PARKER FLUID CONNECTORS GROUP


SAE 45° Flared Brass Tube Fittings

;; ;;;
;;; ;;
;; ;;
Male Branch Tee 145F Female Elbow 150F 90° Swivel Elbow 166FSV
PART TUBE STRGHT

;;;
REF. SAE 010425 REF. SAE 010203 NO. SIZE THD
PART TUBE PIPE STRGHT PART TUBE PIPE STRGHT
NO. SIZE THD THD NO. SIZE THD THD 166FSV-4-4 1/4 7/16-20
145F-2-2 1/8 1/8 5/16-24 150F-4-2 1/4 1/8 7/16-20 166FSV-6-6 3/8 5/8-18
145F-4-2 1/4 1/8 7/16-20 150F-4-4 1/4 1/4 7/16-20 166FSV-8-8 1/2 3/4-16
145F-4-4 1/4 1/4 7/16-20 150F-5-4 5/16 1/4 1/2-20 166FSV-10-10 5/8 7/8-14
145F-5-4 5/16 1/4 1/2-20 150F-6-2 3/8 1/8 5/8-18 166FSV-12-12 3/4 1-1/16-14
145F-6-4 3/8 1/4 5/8-18 150F-6-4 3/8 1/4 5/8-18
150F-6-6 3/8 3/8 5/8-18
145F-6-6 3/8 3/8 5/8-18
150F-6-8 3/8 1/2 5/8-18
145F-6-8 3/8 1/2 5/8-18 150F-8-6 1/2 3/8 3/4-16
145F-8-6 1/2 3/8 3/4-16 Adapter Tee 256F
150F-8-8 1/2 1/2 3/4-16 PART TUBE PIPE STRGHT
145F-8-8 1/2 1/2 3/4-16 150F-8-12 1/2 3/4 3/4-16 NO. SIZE THD THD
145F-10-8 5/8 1/2 7/8-14 150F-10-8* 5/8 1/2 7/8-14 256F-4-2 1/4 1/8 7/16-20

;; ;;;
150F-10-12* 5/8 3/4 7/8-14
Cross 147F

;; ;;;
Male Run Tee 151F
REF. SAE 010501
PART TUBE STRGHT REF. SAE 010424 Flared Seal Plug 639F
NO. SIZE THD PART TUBE PIPE STRGHT REF. SAE 010109
147F-6 3/8 5/8-18 NO. SIZE THD THD
PART TUBE STRGHT

;;
151F-4-2 1/4 1/8 7/16-20 NO. SIZE THD
151F-4-4 1/4 1/4 7/16-20 639F-4 1/4 7/16-20

;;
Male Elbow 149F-249F 151F-5-4 5/16 1/4 1/2-20 639F-5 5/16 1/2-20
REF. SAE 010202 151F-6-4 3/8 1/4 5/8-18 639F-6 3/8 5/8-18
PART TUBE PIPE STRGHT 151F-6-6 3/8 3/8 5/8-18 639F-8 1/2 3/4-16
NO. SIZE THD THD 151F-6-8 3/8 1/2 5/8-18
149F 639F-10 5/8 7/8-14
149F-2-2 1/8 1/8 5/16-24 151F-8-6 1/2 3/8 3/4-16
149F-3-2 3/16 1/8 3/8-24 151F-8-8 1/2 1/2 3/4-16
249F-3-2 3/16 1/8 3/8-24 151F-10-8 5/8 1/2 7/8-14

;;;
149F-4-2 1/4 1/8 7/16-20
249F-4-2 1/4 1/8 7/16-20 Cap Nut 640F

;;;
Union Elbow 155F
149F-4-4 1/4 1/4 7/16-20 REF. SAE 010112
REF. SAE 010201 PART TUBE STRGHT
249F 249F-4-4 1/4 1/4 7/16-20
PART TUBE STRGHT NO. SIZE THD
149F-4-6 1/4 3/8 7/16-20 NO. SIZE THD 640F-3† 3/16 3/8-24
249F-4-6 1/4 3/8 7/16-20 155F-2 1/8 5/16-24 640F-4† 1/4 7/16-20
149F-5-2 5/16 1/8 1/2-20 155F-3 3/16 3/8-24 640F-5† 5/16 1/2-20
249F-5-2 5/16 1/8 1/2-20 155F-4 1/4 7/16-20 640F-6† 3/8 5/8-18
149F-5-4 5/16 1/4 1/2-20 155F-5 5/16 1/2-20 640F-8† 1/2 3/4-16
249F-5-4 5/16 1/4 1/2-20 155F-6 3/8 5/8-18 640F-10† 5/8 7/8-14
149F-5-6 5/16 3/8 1/2-20 155F-8 1/2 3/4-16
149F-6-2 3/8 1/8 5/8-18 155F-10 5/8 7/8-14
249F-6-2 3/8 1/8 5/8-18 155F-12* 3/4 1-1/16-14

;;
149F-6-4 3/8 1/4 5/8-18
249F-6-4 3/8 1/4 5/8-18 Flared Union-Female Flare to

;;
45° Elbow 159F-259F
149F-6-6 3/8 3/8 5/8-18 Female Flare 660FHD
REF. SAE 010302

;;
249F-6-6 3/8 3/8 5/8-18 REF. SAE 010107
PART TUBE PIPE STRGHT
149F-6-8 3/8 1/2 5/8-18 159F NO. SIZE THD THD PART TUBE STRGHT
249F-6-8 3/8 1/2 5/8-18 NO. SIZE THD
159F-4-2 1/4 1/8 7/16-20
149F-6-12* 3/8 3/4 5/8-18 660FHD-4† 1/4 7/16-20
259F-4-2 1/4 1/8 7/16-20
149F-8-4 1/2 1/4 3/4-16 660FHD-6† 3/8 5/8-18
159F-4-4 1/4 1/4 7/16-20
149F-8-6 1/2 3/8 3/4-16 660FHD-8† 1/2 3/4-16
259F-4-4 1/4 1/4 7/16-20
249F-8-6 1/2 3/8 3/4-16 259F 660FHD-10† 5/8 7/8-14
159F-5-2 5/16 1/8 1/2-20
149F-8-8 1/2 1/2 3/4-16 159F-5-4 5/16 1/4 1/2-20
249F-8-8 1/2 1/2 3/4-16 159F-6-2 3/8 1/8 5/8-18
149F-8-12* 1/2 3/4 3/4-16 159F-6-4 3/8 1/4 5/8-18
149F-10-6 5/8 3/8 7/8-14 259F-6-4 3/8 1/4 5/8-18 Reducer-Male Flare to
149F-10-8 5/8 1/2 7/8-14 159F-6-6 3/8 3/8 5/8-18 Female Flare 661FHD
249F-10-8 5/8 1/2 7/8-14 259F-6-6 3/8 3/8 5/8-18 REF. SAE 010105
149F-10-12* 5/8 3/4 7/8-14 159F-8-4 1/2 1/4 3/4-16 PART TUBE SIZE STRGHT
149F-12-8* 3/4 1/2 1-1/16-14 159F-8-6 1/2 3/8 3/4-16 NO. 1 2 THD
149F-12-12* 3/4 3/4 1-1/16-14 259F-8-6 1/2 3/8 3/4-16 661FHD-4-6† 1/4 3/8 7/16-20
149F-14-12* 7/8 3/4 1-1/4-12 159F-8-8 1/2 1/2 3/4-16 661FHD-4-8† 1/4 1/2 7/16-20
159F-10-6 5/8 3/8 7/8-14 661FHD-6-4† 3/8 1/4 5/8-18
259F-10-6 5/8 3/8 7/8-14 661FHD-6-8† 3/8 1/2 5/8-18
Flare Elbow to SAE Metric Straight 159F-10-8 5/8 1/2 7/8-14 661FHD-8-6† 1/2 3/8 3/4-16
Thread 149F-X-MIX 259F-10-8 5/8 1/2 7/8-14 661FHD-8-10† 1/2 5/8 3/4-16
PART TUBE METRIC 159F-12-8* 3/4 1/2 1-1/16-14 661FHD-10-8† 5/8 1/2 7/8-14
NO. SIZE THD 661FHD-10-12† 5/8 3/4 7/8-14
149F-10-M127 5/8 M27 x 2.0 661FHD-12-10† 3/4 5/8 1-1/16-14
Note: Viton o-ring is standard 45° Flare Elbow to SAE Metric Straight
Thread 159F-X-MIX
PART TUBE METRIC
NO. SIZE THD
Flare Elbow to SAE Straight Thread 159F-8-M116 1/2 M16 x 1.5
Female Flare to Male Pipe thread
1495F 159F-10-M127 5/8 M27 x 2.0
PART TUBE STRAIGHT Note: Viton o-ring is standard 664FHD
NO. SIZE THD REF. SAE 010106
1495F-12-8* 3/4 3/4-16 PART TUBE PIPE STRGHT
45° Flare to Straight Thread 1595F
1495F-12-12* 3/4 1-1/16-12 PART TUBE STRAIGHT NO. SIZE THD THD
NO. SIZE THD 664FHD-4-2† 1/4 1/8 7/16-20
1595F-8-8 1/2 3/4-16 664FHD-4-4† 1/4 1/4 7/16-20

Should be used with 2GF copper flare gasket 1595F-12-8* 3/4 3/4-16 664FHD-6-4† 3/8 1/4 5/8-18
*Comes standard with thread protectors 1595F-12-12* 3/4 1-1/16-12 664FHD-8-6† 1/2 3/8 3/4-16

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0432-04 5/2/06 8:56 PM Page 1

436-06

CAST S.P.A.
FLARED STEEL TUBE FITTINGS – CONVERSION ADAPTERS

Male Stud Elbow – Thread: BSP Taper


Adjustable Male Stud Elbow with O-Ring & Washer
Bar Ø Tube G JIC 37° Part No. Thread: BSP Taper
mm in. Standard Body
350 6 1/4 1/8 7/16-20 201001.3 Bar Ø Tube G JIC 37° Part No.
350 8 5/16 1/8 1/2-20 201002.3 mm in. Standard Body
350 10 3/8 1/4 9/16-18 201003.3 350 6 1/4 1/8 7/16-20 204401.3
350 12 1/2 3/8 3/4-16 201004.3 315 8 5/16 1/8 1/2-20 204402.3
350 14-15-16 5/8 1/2 7/8-14 201005.3 315 10 3/8 1/4 9/16-18 204403.3
350 18-20 3/4 3/4 1-1/16-12 201006.3 250 12 1/2 3/8 3/4-16 204404.3
290 25 1 1 1-5/16-12 201007.3 250 14-15-16 5/8 1/2 7/8-14 204405.3
240 30-32 1-1/4 1-1/4 1-5/8-12 201008.3 250 18-20 3/4 3/4 1-1/16-12 204406.3
240 38 1-1/2 1-1/2 1-7/8-12 201009.3 200 25 1 1 1-5/16-12 204407.3
350 6 1/4 1/4 7//16-20 201010.3 200 30-32 1-1/4 1-1/4 1-5/8-12 204408.3
350 8 5/16 1/4 1/2-20 201011.3 160 38 1-1/2 1-1/2 1-7/8-12 204409.3
350 10 3/8 1/8 9/16-18 201012.3 315 6 1/4 1/4 7/16-20 204410.3
350 10 3/8 3/8 9/16-18 201013.3 250 6 1/4 3/8 7/16-20 204411.3
350 10 3/8 1/2 9/16-18 201014.3 250 6 1/4 1/2 7/16-20 204412.3
350 12 1/2 1/4 3/4-16 201015.3 350 8 5/16 1/8 1/2-20 204413.3
350 12 1/2 1/2 3/4-16 201016.3 250 8 5/16 3/8 1/2-20 204414.3
350 12 1/2 3/4 3/4-16 201017.3 250 10 3/8 3/8 9/16-18 204415.3
350 14-15-16 5/8 3/8 7/8-14 201018.3 250 10 3/8 1/2 9/16-18 204416.3
350 14-15-16 5/8 3/4 7/8-14 201019.3 315 12 1/2 1/2 3/4-16 204417.3
350 18-20 3/4 1/2 1-1/16-12 201020.3 250 12 1/2 1/2 3/4-16 204418.3
290 18-20 3/4 1 1-1/16-12 201021.3 250 12 1/2 3/4 3/4-16 204419.3
290 25 1 3/4 1-5/16-12 201022.3 250 14-15-16 5/8 3/8 7/8-14 204420.3
240 30-32 1-1/4 1 1-5/8-12 201023.3 250 14-15-16 5/8 3/4 7/8-14 204421.3
250 18-20 3/4 1/2 1-1/16-12 204422.3
200 18-20 3/4 1 1-1/16-12 204423.3
Male Stud Coupling 250 25 1 3/4 1-5/16-12 204424.3
200 25 1 1-1/4 1-5/16-12 204425.3
Thread: BSP Taper 200 30-32 1-1/4 1 1-5/8-12 204426.3
200 38 1-1/2 1-1/4 1-7/8-12 204427.3

Bar Ø Tube G JIC 37° Part No. Adjustable Male Stud Elbow with O-Ring & Washer
mm in. Standard Body
350 6 1/4 1/8 7/16-20 200801.3
Thread: Metric
350 8 5/16 1/8 1/2-20 200802.3 Bar Ø Tube M JIC 37° Part No.
350 10 3/8 1/4 9/16-18 200803.3 mm in. Standard Body
350 12 1/2 3/8 3/4-16 200804.3 350 6 1/4 10x1 7/16-20 204501.3
350 14-15-16 5/8 1/2 7/8-14 200805.3 315 8 5/16 12x1,5 1/2-20 204502.3
350 18-20 3/4 3/4 1-1/16-12 200806.3 315 10 3/8 14x1,5 9/16-18 204503.3
290 25 1 1 1-5/16-12 200807.3 315 12 1/2 16x1,5 3/4-16 204504.3
240 30-32 1-1/4 1-1/4 1-5/8-12 200808.3 250 14-15-16 5/8 22x1,5 7/8-14 204505.3
240 38 1-1/2 1-1/2 1-7/8-12 200809.3 250 18-20 3/4 27x2 1-1/16-12 204506.3
350 6 1/4 1/4 7//16-20 200810.3 200 25 1 33x2 1-5/16-12 204507.3
350 8 5/16 1/4 1/2-20 200811.3 200 30-32 1-1/4 42x2 1-5/8-12 204508.3
350 10 3/8 1/8 9/16-18 200812.3 160 38 1-1/2 48x2 1-7/8-12 204509.3
350 10 3/8 3/8 9/16-18 200813.3 315 6 1/4 12x1,5 7/16-20 204510.3
350 10 3/8 1/2 9/16-18 200814.3 350 8 5/16 10x1 1/2-20 204511.3
350 12 1/2 1/4 3/4-16 200815.3 315 8 5/16 14x1,5 1/2-20 204512.3
350 12 1/2 1/2 3/4-16 200816.3 315 10 3/8 16x1,5 9/16-18 204513.3
350 12 1/2 3/4 3/4-16 200817.3 315 12 1/2 18x1,5 3/4-16 204514.3
350 14-15-16 5/8 3/8 7/8-14 200818.3 315 14-15-16 5/8 18x1,5 7/8-14 204515.3
350 14-15-16 5/8 3/4 7/8-14 200819.3 250 14-15-16 5/8 20x1,5 7/8-14 204516.3
350 18-20 3/4 1/2 1-1/16-12 200820.3 250 18-20 3/4 22x1,5 1-1/16-12 204517.3
290 18-20 3/4 1 1-1/16-12 200821.3 250 25 1 27x2 1-5/16-12 204518.3
290 25 1 3/4 1-5/16-12 200822.3
240 30-32 1-1/4 1 1-5/8-12 200823.3
240 38 1-12 1-14 1-7/8-12 200824.3

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481

SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA


Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
Distributed in North America by
WORLD WIDE METRIC INC. info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
0433-04 5/2/06 8:57 PM Page 1

437-06

CAST S.P.A.

BSI 60° THREADED STEEL FITTINGS – CONVERSION ADAPTERS

Male Straight Adapter Male Straight Adapter Female Straight Adapter Female Straight Adapter
Thread: BSP Taper Thread: BSP Parallel Thread: BSP Taper Thread: BSP Parallel

Bar Part No. A B Bar Part No. A B Bar Part No. A B Bar Part No. A B
350 300101 1/8 1/8 400 300501 1/8 1/8 350 301401 1/8 1/8 350 301201 1/8 1/8
350 300102 1/8 1/4 400 300502 1/8 1/4 350 301402 1/4 1/4 350 301202 1/4 1/4
350 300103 1/4 1/4 400 300503 1/8 3/8 250 301403 3/8 3/8 250 301203 3/8 3/8
250 300104 1/4 3/8 400 300504 1/4 1/4 225 301404 1/2 1/2 225 301204 1/2 1/2
250 300105 3/8 3/8 400 300505 1/4 3/8 200 301405 3/4 3/4 200 301205 3/4 3/4
225 300106 3/8 1/2 350 300506 1/4 1/2 160 301406 1 1 160 301206 1 1
225 300107 1/2 1/2 315 300507 1/4 3/4 160 301407 1-1/4 1-1/4 160 301207 1-1/4 1-1/4
200 300108 1/2 3/4 400 300508 3/8 3/8 160 301408 1-1/2 1-1/2 160 301208 1-1/2 1-1/2
200 300109 3/4 3/4 350 300509 3/8 1/2 350 301409 1/8 1/4 350 301209 1/8 1/4
160 300110 3/4 1 315 300510 3/8 3/4 250 301410 1/8 3/8 250 301210 1/8 3/8
160 300111 1 1 350 300511 1/2 1/2 250 301411 1/4 3/8 250 301211 1/4 3/8
160 300112 1-1/4 1-1/4 350 300512 1/2 5/8 225 301412 1/4 1/2 225 301212 1/4 1/2
160 300113 1-1/2 1-1/2 315 300513 1/2 3/4 200 301413 1/4 3/4 200 301213 1/4 3/4
100 300114 2 2 250 300514 1/2 1 225 301414 3/8 1/2 225 301214 3/8 1/2
250 300115 3/8 1/8 200 300515 1/2 1-1/4 200 301415 1/2 3/4 200 301215 1/2 3/4
225 300116 1/2 1/4 350 300516 5/8 5/8
200 300117 3/4 1/4 315 300517 5/8 3/4
160 300118 1-1/4 1 315 300518 3/4 3/4
250 300519 3/4 1
200 300520 3/4 1-1/4
160 300521 3/4 1-1/2
250 300522 1 1
Male Straight Adapter 200 300523 1 1-1/4
Female Straight Adapter
Thread: NPT 100 300524 1 1-1/2 Thread: NPT
125 300525 1 2
Bar Part No. A B 200 300526 1-1/4 1-1/4 Bar Part No. A B
350 300201 1/8 1/8 160 300527 1-1/4 1-1/2 350 301501 1/8 1/8
350 300202 1/8 1/4 125 300528 1-1/4 2 350 301502 1/4 1/4
350 300203 1/4 1/4 160 300529 1-1/2 1-1/2 250 301503 3/8 3/8
250 300204 1/4 3/8 125 300530 1-1/2 2 225 301504 1/2 1/2
250 300205 3/8 3/8 125 300531 2 2 200 301505 3/4 3/4
225 300206 3/8 1/2 350 300532 1/8 1/2 160 301506 1 1
225 300207 1/2 1/2 350 300533 1/4 5/8 160 301507 1-1/4 1-1/4
200 300208 1/2 3/4 250 300534 1/4 1 160 301508 1-1/2 1-1/2
200 300209 3/4 3/4 350 300535 3/8 5/8 350 301509 1/8 1/4
160 300210 3/4 1 250 300536 3/8 1 250 301510 1/8 3/8
160 300211 1 1 160 300537 1/2 1-1/2 250 301511 1/4 3/8
160 300212 1-1/4 1-1/4 250 300538 5/8 1 225 301512 1/4 1/2
160 300213 1-1/2 1-1/2 200 300539 5/8 1-1/4 200 301513 1/4 3/4
100 300214 2 2 225 301514 3/8 1/2
250 300215 3/8 1/8 200 301515 1/2 3/4
225 300216 1/2 1/4
200 300217 3/4 1/4
160 300218 1-1/4 1

world wide metric

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
0434-04 5/2/06 8:58 PM Page 1

438-06

CAST S.P.A.
METRIC FLARELESS STEEL TUBE FITTINGS - DIN 2353
Cutting Rings Nuts Blanking Male Stud Couplings Male Stud Couplings
Plugs
Thread:
Metric parallel

Thread: Thread: Without With


Metric parallel Metric taper EO Seal EO Seal
Part No. Part No. Part No. Part No.
Series Bar Tube with with m Part No. m Part No. m with with m with with with with
Ø mm B3 Ring B4 Ring B3 Ring B4 Ring B3Ring B4 Ring B3 Ring B4 Ring
LL 100 4 100101 – 8x1 100201 8x1 108001 – – – – – – 100601 100601.4
LL 100 6 100102 – 10x1 100202 10x1 108002 – – – – – – 100602 100602.4
LL 100 8 100103 – 12x1 100203 12x1 108003 – – – – – – 100603 100603.4
L 315 6 100104 100104.4 12x1.5 100204 12x1.5 108004 10x1 101904 101904.4 10x1 100404 100404.4 100604 100604.4
L 315 8 100105 100105.4 14x1.5 100205 14x1.5 108005 12x1.5 101905 101905.4 12x1.5 100405 100405.4 100605 100605.4
L 315 10 100106 100106.4 16x1.5 100206 16x1.5 108006 14x1.5 101906 101906.4 14x1.5 100406 100406.4 100606 100606.4
L 315 12 100107 100107.4 18x1.5 100207 18x1.5 108007 16x1.5 101907 101907.4 16x1.5 100407 100407.4 100607 100607.4
L 315 15 100108 100108.4 22x1.5 100208 – – 18x1.5 101908 101908.4 18x1.5 100408 100408.4 100608 100608.4
L 315 18 100109 100109.4 26x1.5 100209 – – 22x1.5 101909 101909.4 22x1.5 100409 100409.4 100609 100609.4
L 160 22 100110 100110.4 30x2 100210 – – – – – 26x1.5 100410 100410.4 100610 100610.4
L 160 28 100111 100111.4 36x2 100211 – – – – – 33x2 100411 100411.4 100611 100611.4
L 160 35 100112 100112.4 45x2 100212 – – – – – 42x2 100412 100412.4 100612 100612.4
L 160 42 100113 100113.4 52x2 100213 – – – – – 48x2 100413 100413.4 100613 100613.4
S 630 6 100114 100114.4 14x1.5 100214 – – 12x1.5 101914 101914.4 12x1.5 100414 100414.4 100614 100614.4
S 630 8 100115 100115.4 16x1.5 100215 – – 14x1.5 101915 101915.4 14x1.5 100415 100415.4 100615 100615.4
S 630 10 100116 100116.4 18x1.5 100216 – – 16x1.5 101916 101916.4 16x1.5 100416 100416.4 100616 100616.4
S 630 12 100117 100117.4 20x1.5 100217 – – 18x1.5 101917 101917.4 18x1.5 100417 100417.4 100617 100617.4
S 630 14 100118 100118.4 22x1.5 100218 – – 20x1.5 101918 101918.4 20x1.5 100418 100418.4 100618 100618.4
S 400 16 100119 100119.4 24x1.5 100219 – – 22x1.5 101919 101919.4 22x1.5 100419 100419.4 100619 100619.4
S 400 20 100120 100120.4 30x2 100220 – – – – – 27x2 100420 100420.4 100620 100620.4
S 400 25 100121 100121.4 36x2 100221 – – – – – 33x2 100421 100421.4 100621 100621.4
S 400 30 100122 100122.4 42x2 100222 – – – – – 42x2 100422 100422.4 100622 100622.4
S 315 38 100123 100123.4 52x2 100223 – – – – – 48x2 100423 100423.4 100623 100623.4

Equal Equal Equal Bulkhead Bulkhead Welding Bulkhead


Elbows Tees Crosses Connections Elbows Connections

Part No. Part No. Part No. Part No. Part No. Part No.
Series Bar Tube with with with with with with with with with with with with
Ø mm B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring
LL 100 4 103801 103801.4 103901 103901.4 104001 104001.4 – – – – – –
LL 100 6 103802 103802.4 103902 103902.4 104002 104002.4 – – – – – –
LL 100 8 103803 103803.4 103903 103903.4 104003 104003.4 – – – – – –
L 315 6 103804 103804.4 103904 103904.4 104004 104004.4 103604 103604.4 103704 103704.4 105604 105604.4
L 315 8 103805 103805.4 103905 103905.4 104005 104005.4 103605 103605.4 103705 103705.4 105605 105605.4
L 315 10 103806 103806.4 103906 103906.4 104006 104006.4 103606 103606.4 103706 103706.4 105606 105606.4
L 315 12 103807 103807.4 103907 103907.4 104007 104007.4 103607 103607.4 103707 103707.4 105607 105607.4
L 315 15 103808 103808.4 103908 103908.4 104008 104008.4 103608 103608.4 103708 103708.4 105608 105608.4
L 315 18 103809 103809.4 103909 103909.4 104009 104009.4 103609 103609.4 103709 103709.4 105609 105609.4
L 160 22 103810 103810.4 103910 103910.4 104010 104010.4 103610 103610.4 103710 103710.4 105610 105610.4
L 160 28 103811 103811.4 103911 103911.4 104011 104011.4 103611 103611.4 103711 103711.4 105611 105611.4
L 160 35 103812 103812.4 103912 103912.4 104012 104012.4 103612 103612.4 103712 103712.4 105612 105612.4
L 160 42 103813 103813.4 103913 103913.4 104013 104013.4 103613 103613.4 103713 103713.4 105613 105613.4
S 630 6 103814 103814.4 103914 103914.4 104014 104014.4 103614 103614.4 103714 103714.4 105614 105614.4
S 630 8 103815 103815.4 103915 103915.4 104015 104015.4 103615 103615.4 103715 103715.4 105615 105615.4
S 630 10 103816 103816.4 103916 103916.4 104016 104016.4 103616 103616.4 103716 103716.4 105616 105616.4
S 630 12 103817 103817.4 103917 103917.4 104017 104017.4 103617 103617.4 103717 103717.4 105617 105617.4
S 630 14 103818 103818.4 103918 103918.4 104018 104018.4 103618 103618.4 103718 103718.4 105618 105618.4
S 400 16 103819 103819.4 103919 103919.4 104019 104019.4 103619 103619.4 103719 103719.4 105619 105619.4
S 400 20 103820 103820.4 103920 103920.4 104020 104020.4 103620 103620.4 103720 103720.4 105620 105620.4
S 400 25 103821 103821.4 103921 103921.4 104021 104021.4 103621 103621.4 103721 103721.4 105621 105621.4
S 400 30 103822 103822.4 103922 103922.4 104022 104022.4 103622 103622.4 103722 103722.4 105622 105622.4
S 315 38 103823 103823.4 103923 103923.4 104023 104023.4 103623 103623.4 103723 103723.4 105623 105623.4

To specify Stainless Steel, change 2nd digit in part number from “0” to “1”.

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0435-04 5/2/06 8:58 PM Page 1

439-06

CAST S.P.A.
METRIC FLARELESS STEEL TUBE FITTINGS - DIN 2353 Straight
Male Stud Elbows Male Stud Barrel Tees Male Stud Branch Tees Couplings
Form C: Taper
Form D: Parallel

(Rated pressure
valid only with
tapered ports.)

Series Bar Tube M Form Part No. M Form Part No. M Form Part No. Part No.
Ø mm B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring
LL 100 4 8x1 C – – 8x1 C – – 8x1 C – – 103501 –
LL 100 6 10x1 C – – 10x1 C – – 10x1 C – – 103502 –
LL 100 8 10x1 C – – 10x1 C – – 10x1 C – – 103503 –
L 315 6 10x1 C 102204 102204.4 10x1 C 103204 103204.4 10x1 C 102704 102704.4 103504 103504.4
L 315 8 12x1.5 C 102205 102205.4 12x1.5 C 103205 103205.4 12x1.5 C 102705 102705.4 103505 103505.4
L 315 10 14 x1.5 C 102206 102206.4 14x1.5 C 103206 103206.4 14x1.5 C 102706 102706.4 103506 103506.4
L 315 12 16x1.5 C 102207 102207.4 16x1.5 C 103207 103207.4 16x1.5 C 102707 102707.4 103507 103507.4
L 315 15 18x1.5 C 102208 102208.4 18x1.5 C 103208 103208.4 18x1.5 C 102708 102708.4 103508 103508.4
L 315 18 22x1.5 C 102209 102209.4 22x1.5 C 103209 103209.4 22x1.5 C 102709 102709.4 103509 103509.4
L 160 22 26x1.5 D 102410 102214.4 26x1.5 D 103410 103410.4 26x1.5 D 102910 102910.4 103510 103510.4
L 160 28 33x2 D 102411 102215.4 33x2 D 103411 103411.4 33x2 D 102911 102911.4 103511 103511.4
L 160 35 42x2 D 102412 102412.4 42x2 D 103412 103412.4 42x2 D 102912 102912.4 103512 103512.4
L 160 42 48x2 D 102413 102413.4 48x2 D 103413 103413.4 48x2 D 102913 102913.4 103513 103513.4
S 630 6 12x1.5 C 102214 102214.4 12x1.5 C 103214 103214.4 12x1.5 C 102714 102714.4 103514 103514.4
S 630 8 14x1.5 C 102215 102215.4 14x1.5 C 103215 103215.4 14x1.5 C 102715 102715.4 103515 103515.4
S 630 10 16x1.5 C 102216 102216.4 16x1.5 C 103216 103216.4 16x1.5 C 102716 102716.4 103516 103516.4
S 630 12 18x1.5 C 102217 102217.4 18x1.5 C 103217 103217.4 18x1.5 C 102717 102717.4 103517 103517.4
S 630 14 20x1.5 C 102218 104218.4 20x1 C 103218 103218.4 20x1.5 C 102718 102718.4 103518 103518.4
S 400 16 22x1.5 C 102219 102219.4 22x1.5 C 103219 103219.4 22x1.5 C 102719 102719.4 103519 103519.4
S 400 20 27x2 D 102420 102420.4 27x2 D 103420 103420.4 27x2 D 102920 102920.4 103520 103520.4
S 400 25 33x2 D 102421 102421.4 33x2 D 103421 103421.4 33x2 D 102921 102921.4 103521 103521.4
S 400 30 42x2 D 102422 102422.4 42x2 D 103422 103422.4 42x2 D 102922 102922.4 103522 103522.4
S 315 38 48x2 D 102423 102423.4 48x2 D 103423 103423.4 48x2 D 102923 102923.4 103523 103523.4

Adjustable Male Stud Elbows Adjustable Male Stud Adjustable Male Stud Barrel Tees
Branch Tees

Parallel Thread Parallel Thread Parallel Thread

Series Bar Tube M With Male Stud Without Stud M With Male Stud Without Stud M With Male Stud Without Stud
Ø mm B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring
L 315 6 10x1 104404 104404.4 104204 104204.4 10x1 105204 105204.4 105004 105004.4 10x1 104804 104804.4 104604 104604.4
L 315 8 12x1.5 104405 104405.4 104205 104205.4 12x1.5 105205 105205.4 105005 105005.4 12x1.5 104805 104805.4 104605 104605.4
L 315 10 14x1.5 104406 104406.4 104206 104206.4 14x1.5 105206 105206.4 105006 105006.4 14x1.5 104806 104806.4 104606 104606.4
L 315 12 16x1.5 104407 104407.4 104207 104207.4 16x1.5 105207 105207.4 105007 105007.4 16x1.5 104807 104807.4 104607 104607.4
L 315 15 18x1.5 104408 104408.4 104208 104208.4 18x1.5 105208 105208.4 105008 105008.4 18x1.5 104808 104808.4 104608 104607.4
L 315 18 22x1.5 104409 104409.4 104209 104209.4 22x1.5 105209 105209.4 105009 105009.4 22x1.5 104809 104809.4 104609 104609.4
L 160 22 26x1.5 104410 104410.4 104210 104210.4 26x1.5 105210 105210.4 105010 105010.4 26x1.5 104810 104810.4 104610 104610.4
L 160 28 33x2 104411 104411.4 104211 104211.4 33x2 105211 105211.4 105011 105011.4 33x2 104811 104811.4 104611 104611.4
L 160 35 42x2 104412 104412.4 104212 104212.4 42x2 105212 105212.4 105012 105012.4 42x2 104812 104812.4 104612 104612.4
L 160 42 48x2 104413 104413.4 104213 104213.4 48x2 105213 105213.4 105013 105013.4 48x2 104813 104813.4 104613 104613.4
S 630 6 12x1.5 104414 104414.4 104214 104214.4 12x1.5 105214 105213.4 105014 105014.4 12x1.5 104814 104814.4 104614 104614.4
S 630 8 14x1.5 104415 104415.4 104215 104215.4 14x1.5 105215 105215.4 105015 105015.4 14x1.5 104815 104815.4 104615 104615.4
S 630 10 16x1.5 104416 104416.4 104216 104216.4 16x1.5 105216 105216.4 105016 105016.4 16x1.5 104816 104816.4 104616 104616.4
S 630 12 18x1.5 104417 104417.4 104217 104217.4 18x1.5 105217 105217.4 105017 105017.4 18x1.5 104817 104817.4 104617 104617.4
S 630 14 20x1.5 104418 104418.4 104218 104218.4 20x1.5 105218 105218.4 105018 105018.4 20x1.5 104818 104818.4 104618 104618.4
S 400 16 22x1.5 104419 104419.4 104219 104219.4 22x1.5 105219 105219.4 105019 105019.4 22x1.5 104819 104819.4 104619 104619.4
S 400 20 27x2 104420 104420.4 104220 104220.4 27x2 105220 105220.4 105020 105020.4 27x2 104820 104820.4 104620 104620.4
S 400 25 33x2 104421 104421.4 104221 104221.4 33x2 105221 105221.4 105021 105021.4 33x2 104821 104821.4 104621 104621.4
S 400 30 42x2 104422 104422.4 104222 104222.4 42x2 105222 105222.4 105022 105022.4 42x2 104822 104822.4 104622 104622.4
S 315 38 48x2 104423 104423.4 104223 104223.4 48x2 105223 105223.4 105023 105023.4 48x2 104823 104823.4 104623 104623.4
To specify Stainless Steel, change 2nd digit in part number from “0” to “1”.
EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX
Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0436-04 5/2/06 8:59 PM Page 1

440-06

CAST S.P.A.
METRIC FLARELESS STEEL TUBE FITTINGS (B.S.P. THREAD) - DIN 2353
Male Stud Couplings Male Stud Male Stud Couplings Male Stud Elbows
Couplings with Elastomer Seal
Form C: Taper
Form D: Parallel
(Rated pressure valid
only with tapered ports.)

Thread:
Thread: B.S.P. Taper
B.S.P. Parallel
Thread: B.S.P. Taper or Parallel
Series Bar Ø Tube G Part No. G Part No. Part No. G Form Part No.
mm w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring
LL 100 4 1/8” 101701 – – – – 100501 – 1/8” C 102001 –
LL 100 6 1/8” 101702 – – – – 100502 – 1/8” C 102002 –
LL 100 8 1/8” 101703 – – – – 100503 – 1/8” C 102003 –
L 315 6 1/8” 101704 101704.4 1/8” 100304 100304.4 100504 100504.4 1/8” C 102004 102004.4
L 315 8 1/4” 101705 101705.4 1/4” 100305 100305.4 100505 100505.4 1/4” C 102005 102005.4
L 315 10 1/4” 101706 101706.4 1/4” 100306 100306.4 100506 100506.4 1/4” C 102006 102006.4
L 315 12 3/8” 101707 101707.4 3/8” 100307 100307.4 100507 100507.4 3/8” C 102007 102007.4
L 315 15 1/2” 101708 101708.4 1/2” 100308 100308.4 100508 100508.4 1/2” C 102008 102008.4
L 315 18 1/2” 101709 101709.4 1/2” 100309 100309.4 100509 100509.4 1/2” C 102009 102009.4
L 160 22 3/4” 101710 101710.4 3/4” 100310 100310.4 100510 100510.4 3/4” C 102010 102010.4
L 160 22 – – – – – – – – 3/4” D 102310 102310.4
L 160 28 1” 101711 101711.4 1” 100311 100311.4 100511 100511.4 1” D 102311 102311.4
L 160 35 1-1/4” 101712 101712.4 1-1/4” 100312 100312.4 100512 100512.4 1-1/4” D 102312 102312.4
L 160 42 1-1/2” 101713 101713.4 1 1/2” 100313 100313.4 100513 100513.4 1-1/2” D 102313 102313.4
S 630 6 1/4” 101714 101714.4 1/4” 100314 100314.4 100514 100514.4 1/4” C 102014 102014.4
S 630 8 1/4” 101715 101715.4 1/4” 100315 100315.4 100515 100515.4 1/4” C 102015 102015.4
S 630 10 3/8” 101716 101716.4 3/8” 100316 100316.4 100516 100516.4 3/8” C 102016 102016.4
S 630 12 3/8” 101717 101717.4 3/8” 100317 100317.4 100517 100517.4 3/8” C 102017 102017.4
S 630 14 1/2” 101718 101718.4 1/2” 100318 100318.4 100518 100518.4 1/2” C 102018 102018.4
S 400 16 1/2” 101719 101719.4 1/2” 100319 100319.4 100519 100519.4 1/2” C 102019 102019.4
S 400 20 3/4” 101720 101720.4 3/4” 100320 100320.4 100520 100520.4 3/4” C 102020 102020.4
S 400 25 1” 101721 101721.4 1” 100321 100321.4 100521 100521.4 1” D 102321 102321.4
S 400 30 1-1/4” 101722 101722.4 1-1/4” 100322 100322.4 100522 100522.4 1-1/4” D 102322 102322.4
S 315 38 1-1/2” 101723 101723.4 1-1/2” 100323 100323.4 100523 100523.4 1-1/2” D 102323 102323.4

Male Stud Barrel Tees Male Stud Branch Tees Adjustable Male Stud Adjustable Male
Elbows w/ Male Stud Stud Elbows
Form C: Taper
Form D: Parallel
(Rated pressure valid
only with tapered ports.)

Thread: B.S.P. Taper or Parallel Thread: B.S.P. Taper or Parallel Thread: B.S.P. Parallel

Series Bar Ø Tube G Form Part No. G Form Part No. G Part No. Part No.
mm w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring
LL 100 4 1/8” C 103001 – 1/8” C 102501 – – – – – –
LL 100 6 1/8” C 103002 – 1/8” C 102502 – – – – – –
LL 100 8 1/8” C 103003 – 1/8” C 102503 – – – – – –
L 315 6 1/8” C 103004 103004.4 1/8” C 102504 102504.4 1/8” 104304 104304.4 104204 104204.4
L 315 8 1/4” C 103005 103005.4 1/4” C 102505 102505.4 1/4” 104305 104305.4 104205 104205.4
L 315 10 1/4” C 103006 103006.4 1/4” C 102506 102506.4 1/4” 104306 104306.4 104206 104206.4
L 315 12 3/8” C 103007 103007.4 3/8” C 102507 102507.4 3/8” 104307 104307.4 104207 104207.4
L 315 15 1/2” C 103008 103008.4 1/2” C 102508 102508.4 1/2” 104308 104308.4 104208 104208.4
L 315 18 1/2” C 103009 103009.4 1/2” C 102509 102509.4 1/2” 104309 104309.4 104209 104209.4
L 160 22 3/4” D 103310 103310.4 3/4” D 102810 102810.4 3/4” 104310 104310.4 104210 104210.4
L 160 28 1” D 103311 103311.4 1” D 102811 102811.4 1” 104311 104311.4 104211 104211.4
L 160 35 1-1/4” D 103312 103312.4 1-1/4” D 102812 102812.4 1-1/4” 104312 104312.4 104212 104212.4
L 160 42 1-1 /2” D 103313 103313.4 1-1/2” D 102813 102813.4 1-1/2” 104313 104313.4 104213 104213.4
S 630 6 1/4” C 103014 103014.4 1/4” C 102514 102514.4 1/4” 104314 104314.4 104214 104214.4
S 630 8 1/4” C 103015 103015.4 1/4” C 102515 102515.4 1/4” 104315 104315.4 104215 104215.4
S 630 10 3/8” C 103016 103016.4 3/8” C 102516 102516.4 3/8” 104316 104316.4 104216 104216.4
S 630 12 3/8” C 103017 103017.4 3/8” C 102517 102517.4 3/8” 104317 104317.4 104217 104217.4
S 630 14 1/2” C 103018 103018.4 1/2” C 102518 102518.4 1/2” 104318 104318.4 104218 104218.4
S 400 16 1/2” C 103019 103019.4 1/2” C 102519 102519.4 1/2” 104319 104319.4 104219 104219.4
S 400 20 3/4” D 103320 103320.4 3/4” D 102820 102820.4 3/4” 104320 104320.4 104220 104220.4
S 400 25 1” D 103321 103321.4 1” D 102821 102821.4 1” 104321 104321.4 104221 104221.4
S 400 30 1-1/4” D 103322 103322.4 1-1/4” D 102822 102822.4 1-1/4” 104322 104322.4 104222 104222.4
S 315 38 1-1/2” D 103323 103323.4 1-1/2” D 102823 102823.4 1-1/2” 104323 104323.4 104223 104223.4

To specify Stainless Steel, change 2nd digit in part number from “0” to “1”.
EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX
Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481

SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA


Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
Distributed in North America by
WORLD WIDE METRIC INC. info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
435 5/2/06 9:00 PM Page 1

441-06

METRIC ALUMINUM BRASS TUBING


for Condenser, Heat Exchanger and Seawater Systems

Weight
kg/m Weight
kg/m
O.D. mm WALL mm O.D. mm WALL mm
8 1 0.18 30 1.5 1.11
10 1 0.24 38 1.5 1.43
12 1 0.29 40.95 1.5 1.50
12 2 0.45 44.5 1.5 1.68
14 1 0.34 54.05 1.5 2.10
15.14 1.2 0.36 57 1.5 2.17
15.14 2 0.50 76.1 2 3.86
16 1 0.40 88.9 2 4.53
108 2.5 6.87
16 1.5 0.58 159 2.5 10.19
16 2 0.79 219 3 16.89
19 1 0.58 267 3 20.64
19 1.2 0.59 324 4 33.36
20 1 0.50 368 4 37.95
25 1.5 0.92
28.25 1.5 1.02 Material: Aluminum Brass DIN 1785 CuZn20A12

METRIC CARBON STEEL TUBING


For Hydraulic and Pneumatic Applications – DIN 2391
Type: Seamless Cold Drawn High Pressure Steel Tubes
Material: Steel ST 35.4, DIN 2391

Working Proof Burst Working Proof Burst


Pressure Pressure Pressure Pressure Pressure Pressure
O.D. mm WALL mm BAR* BAR* BAR* kg/m O.D. mm WALL mm BAR* BAR* BAR* kg/m
6 1 377 558 1320 0.12 22 1.5 163 252 495 0.76
6 1.5 564 792 1584 0.17 22 2 217 336 673 0.99
6 2 644 966 1932 0.19 22 2.5 272 417 858 1.20
8 1 282 430 953 0.17 22 3 326 493 1050 1.41
8 1.5 424 619 1514 0.24 25 2 191 296 586 1.13
8 2 565 792 2145 0.30 25 2.5 239 370 746 1.39
10 1 239 370 746 0.22 25 3 287 438 911 1.63
10 1.5 359 538 1170 0.31 25 4 399 595 1259 2.07
10 2 479 694 1634 0.39 28 1.5 128 198 384 0.98
12 1 199 308 612 0.27 28 2 171 264 520 1.28
12 1.5 299 455 953 0.39 28 2.5 201 301 603 1.57
12 2 399 591 1320 0.49 28 3 256 394 804 1.85
14 1.5 256 394 804 0.46 28 4 302 453 906 2.37
14 2 342 514 1107 0.58 30 2 159 246 483 1.38
14 2.5 403 604 1209 0.71 30 2.5 199 308 612 1.70
15 1 129 194 388 0.35 30 3 239 370 746 2.00
15 1.5 239 370 746 0.50 30 4 333 504 1024 2.57
15 2 319 483 1024 0.64 30 5 416 617 1320 3.08
15 2.5 376 564 1128 0.78 35 2 142 220 411 1.63
16 1 121 182 363 0.36 35 2.5 178 275 520 2.00
16 1.5 224 347 695 0.54 35 3 214 331 631 2.37
16 2 299 455 953 0.69 35 4 322 463 966 3.06
16 2.5 374 558 1225 0.83 35 5 403 604 1209 3.70
16 3 449 656 1514 0.96 38 2.5 164 254 476 2.19
18 1 107 161 321 0.40 38 3 197 305 578 2.59
18 1.5 199 308 612 0.61 38 4 263 405 789 3.35
18 2 266 408 837 0.79 38 5 328 498 1009 4.07
18 2.5 313 469 939 0.96 42 2 119 183 339 1.97
18 3 399 591 1320 1.11 42 3 171 264 520 2.89
20 1.5 179 277 547 0.68 42 4 238 367 707 3.75
20 2 239 370 746 0.89 42 5 297 454 903 4.56
20 2.5 299 455 953 1.08 Safety factor = 1.5
20 3 359 538 1170 1.26
20 4 479 694 1634 1.58 * Admissible working pressure according to DIN 2413

EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX


Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
World
World WideMetric
Wide Metric
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
world wide metric
0440-04 5/7/06 2:51 PM Page 1

442-06

PARKER FLUID CONNECTORS GROUP


BRASS METRIC FLARELESS COMPRESSION FITTINGS
Tube Female BSPP
Series Part No.
O.D. Thread G
L 6 R 1/8 GAI06-LRMS
Light 8 R 1/4 GAI08-LRMS
NP 220 bar 10 R 1/4 GAI10-LRMS
FEMALE 12 R 3/8 GAI12-LRMS
CONNECTORS 15 R 1/2 GAI15-LRMS
18 R 1/2 GAI18-LRMS
NP 112 bar 22 R 3/4 GAI22-LRMS
28 R1 GAI28-LRMS
35 R 1-1/4 GAI35-LRMS
42 R 1-1/2 GAI42-LRMS
6 R 1/4 GAI06-SRMS
Heavy 8 R 1/4 GAI08-SRMS
NP 280 bar 10 R 3/8 GAI10-SRMS
12 R 3/8 GAI12-SRMS
14 R 1/2 GAI14-SRMS
Female 16 R 1/2 GAI16-SRMS
BSP Thread NP 220 bar 20 R 3/4 GAI20-SRMS
25 R1 GAI25-SRMS
30 R 1-1/4 GAI30-SRMS
NP 175 bar 38 R 1-1/2 GAI38-SRMS

Male
Tube BSPP, BSPT Part No. Male NPT Part No.
Series O.D. Thread G Thread
LL 4 R 1/8 taper GE04LLRMS
Very Light 6 R 1/8 taper GE06LLRMS 1/8-27 GE06LL1/8NPTMS
NP 70 bar 8 R 1/8 taper GE08LLRMS 1/8-27 GE08LL1/8NPTMS
8 R 1/4 taper GE08LLR1/4MS
10 R 1/4 taper GE10LLRMS
12 R 1/4 taper GE12LLRMS
12 R 3/8 taper GE12LLR3/8MS
L 6 R 1/8 GE06LRMS 1/8-28 GE06L1/8NPTMS
Light 6 R 1/4 GE06LR1/4MS 1/4-18 GE06L1/4NPTMS
NP 220 bar 6 R 1/4 taper GE06LR1/4KEGMS
6 R 3/8 GE06LR3/8MS
8 R 1/8 taper GE08LR1/8KEGMS 1/4-18 GE08L1/4NPTMS
8 R 1/4 GE08LRMS
8 R 3/8 GE08LR3/8MS
MALE 8 R 1/2 GE08LR1/2MS
10 R 1/4 GE10LRMS 1/4-18 GE10L1/4NPTMS
CONNECTORS 10 R 3/8 GE10LR3/8MS
10 R 1/2 GE10LR1/2MS
12 R 1/4 GE12LR1/4MS 1/4-18 GE12L1/4NPTMS
12 R 1/4 taper GE12LR1/4KEGMS 3/8-18 GE12L3/8NPTMS
12 R 3/8 GE12LRMS 1/2-14 GE12L1/2NPTMS
12 R 1/2 taper GE12LR1/4KEGMS
12 R 1/2 GE12LR1/2MS
NP 112 bar 15 R 3/8 GE15LR3/8MS 1/2-14 GE15L1/2NPTMS
15 R 3/8 taper GE15LR3/8KEGMS
15 R 1/2 GE15LRMS
18 R 1/2 GE18LRMS 1/2-14 GE18L1/2NPTMS
Male NPT Thread 22 R 1/2 GE22LR1/2MS 3/4-14 GE22L3/4NPTMS
22 R 3/4 GE22LRMS
28 R1 GE28LRMS 1 - 11-1/2 GE28L1NPTMS
35 R 1-1/4 GE35LRMS
42 R 1-1/2 GE42LRMS
S 6 R 1/4 GE06SRMS 1/4-18 GE06S1/4NPTMS
Heavy 8 R 1/8 GE08SRMS 1/4-18 GE08S1/4NPTMS
NP 280 bar 8 1/2-14 GE08S1/2NPTMS
10 3/8-18 GE10S3/8NPTMS
10 R 3/8 GE10SRMS 1/2-14 GE10S1/2NPTMS
12 3/8-18 GE12S3/8NPTMS
12 R 3/8 GE12SRMS 1/2-14 GE12S1/2NPTMS
Male BSPP Thread 14 R 1/2 GE14SRMS 1/2-14 GE14S1/2NPTMS
16 R 1/2 GE16SRMS 1/2-14 GE16S1/2NPTMS
NP 112 bar 20 R 3/4 GE20SRMS 3/4-14 GE20S3/4NPTMS
25 R1 GE25SRMS
30 R 1-1/4 GE30SRMS
38 R 1-1/2 GE38SRMS

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0441-04 5/7/06 2:51 PM Page 1

443-06

PARKER FLUID CONNECTORS GROUP


BRASS METRIC FLARELESS COMPRESSION FITTINGS
Tube Male BSPP, Male NPT
Series O.D. BSPT Thread G Part No. Thread Part No.
ELBOWS LL 4 R 1/8 taper WE04LLRMS 1/8-27
Very Light 6 R 1/8 taper WE06LLRMS 1/8-27
NP 70 bar 8 R 1/8 taper WE08LLRMS 1/8-27
L 6 R 1/8 taper WE06LRMS 1/8-27
Light 8 R 1/4 taper WE08LRMS 1/4-18 WE08L1/4NPTMS
NP 220 bar 10 R 1/4 taper WE10LRMS 1/4-18 WE10L1/4NPTMS
12 1/4-18 WE12L1/4NPTMS
12 R 3/8 taper WE12LRMS 3/8-18 WE12L3/8NPTMS
12 1/2-14 WE12L1/2NPTMS
15 R 1/2 taper WE15LRMS 1/2-14 WE15L1/2NPTMS
18 R 1/2 taper WE18LRMS 1/2-14 WE18L1/2NPTMS
BSPP Thread NP 112 bar 22 R 3/4 WE22LRMS 3/4-14 WE22L3/4NPTMS
28 R1 WE28LRMS 1– 11-1/2
35 R 1-1/4 WE35LRMS 1-1/4 – 11-1/2
42 R 1-1/2 WE42LRMS 1-1/2 – 11-1/2
S 6 R 1/4 taper WE06SRMS 1/4-18
Heavy 6 1/2-14 WE06S1/2NPTMS
NP 441 bar 8 R 1/4 taper WE08SRMS 1/4-18 WE08S1/4NPTMS
10 R 3/8 taper WE10SRMS 3/8-18 WE10S3/8NPTMS
12 R 3/8 taper WE12SRMS 3/8-18 WE12S3/8NPTMS
12 1/2-14 WE12S1/2NPTMS
14 R 1/2 taper WE14SRMS 1/2-14 WE14S1/2NPTMS
NP 280 bar 16 R 1/2 taper WE16SRMS 1/2-14 WE16S1/2NPTMS
20 R 3/4 WE20SRMS 3/4-14 WE20S3/4NPTMS
NPT Thread
NP 175 bar 25 R1 WE25SRMS 1 – 11-1/2 WE25S1NPTMS
NP 112 bar 30 R 1-1/4 WE30SRMS 1-1/4 – 11-1/2
38 R 1-1/2 WE38SRMS 1-1/2 – 11-1/2

Bulkhead
Union
Union

Tube Union Union Bulkhead


Series O.D Union Tee Elbow Cross Union
Union Elbow
LL 4 G04LLMS T04LLMS W04LLMS
Very Light 6 G06LLMS T06LLMS W06LLMS
NP 70 bar 8 G08LLMS T08LLMS W08LLMS
10 G10LLMS T10LLMS W10LLMS
L 6 G06LMS T06LMS W06LMS K06LMS SV06LMS
Light 8 G08LMS T08LMS W08LMS K08LMS SV08LMS
NP 220 bar 10 G10LMS T10LMS W10LMS K10LMS SV10LMS
Union tee 12 G12LMS T12LMS W12LMS K12LMS SV12LMS
15 G15LMS T15LMS W15LMS K15LMS SV15LMS
18 G18LMS T18LMS W18LMS K18LMS SV18LMS
NP 112 bar 22 G22LMS T22LMS W22LMS K22LMS SV22LMS
28 G28LMS T28LMS W28LMS K28LMS SV28LMS
35 G35LMS T35LMS W35LMS K35LMS
42 G42LMS T42LMS W42LMS K42LMS
S 6 G06SMS T06SMS W06SMS K06SMS SV06SMS
Heavy 8 G08SMS T08SMS W08SMS K08SMS SV08SMS
NP 441 bar 10 G10SMS T10SMS W10SMS K10SMS SV10SMS
12 G12SMS T12SMS W12SMS K12SMS SV12SMS
NP 280 bar 14 G14SMS T14SMS W14SMS K14SMS
16 G16SMS T16SMS W16SMS K16SMS SV16SMS
NP 220 bar 20 G20SMS T20SMS W20SMS K20SMS SV20SMS
25 G25SMS T25SMS W25SMS K25SMS SV25SMS
30 G30SMS T30SMS W30SMS K30SMS SV30SMS
38 G38SMS T38SMS W38SMS K38SMS
Union Cross

Fluid Connectors for Marine Applications


The World Standard for tube fittings, hose & hose fittings, brass fittings & valves, and
quick disconnect couplings. Available worldwide, in the broadest range of styles, sizes
TM
and materials including stainless steel, brass, nylon & thermoplastic.
For more information see Ad Section or call 1-800-C-PARKER (1-800-272-7537),
visit us at www.parker.com/fcg or email to c-parker@parker.com. In Europe call 00800-27-27-5374 Parker Hannifin Corporation
0442-04 5/2/06 9:03 PM Page 452

444-06

METRIC STAINLESS STEEL SEAMLESS TUBING


DIN 2462
When ordering, specify length, O.D., wall thickness,
and type of stainless steel (304 or 316L).

Weight Pressure
O.D. Wall
Kg/m (Bar)
4,00 1,00 0,07
6,00 1,00 0,12 392
“ 1,50 0,16
“ 2,00 0,20
8,00 1,00 0,17 294
“ 1,50 0,24
“ 2,00 0,30
10,00 1,00 0,22
“ 1,50 0,31 353
“ 2,00 0,40
“ 2,50 0,47
12,00 1,00 0,27
“ 1,50 0,39 294
“ 2,00 0,50
14,00 1,00 0,32
“ 1,50 0,47 235
“ 2,00 0,60
“ 2,50 0,72
“ 3,00 0,82
15,00 1,00 0,35
“ 1,50 0,50 235
“ 2,00 0,65

Weight Pressure Weight Pressure Weight Pressure


O.D. Wall O.D. Wall O.D. Wall
Kg/m (Bar) Kg/m (Bar) Kg/m (Bar)
16,00 1,00 0,37 24,00 2,00 1,10 196 30,00 3,50 2,32
“ 1,50 0,54 220 “ 3,50 1,74 “ 5,00 3,13
“ 2,00 0,70 “ 4,00 2,00 32,00 1,50 1,14
“ 2,50 0,84 25,00 1,00 0,60 “ 2,00 1,50
“ 3,00 0,97 “ 1,50 0,88 “ 2,50 1,84
“ 3,50 1,09 “ 2,00 1,15 188 “ 3,00 2,17
18,00 1,00 0,42 “ 2,50 1,40 35,00 1,25 1,05
“ 1,50 0,62 196 “ 3,00 1,65 “ 1,50 1,25
“ 2,00 0,80 “ 3,20 1,74 “ 2,00 1,65
“ 2,50 0,97 “ 3,50 1,88 “ 2,50 2,03 168
20,00 1,00 0,47 “ 4,00 2,10 “ 5,00 3,75
“ 1,50 0,69 28,00 1,00 0,67 38,00 1,00 0,92
“ 2,00 0,90 235 “ 1,50 0,99 “ 1,50 1,37
“ 2,50 1,09 “ 2,00 1,30 “ 2,00 1,80
“ 3,00 1,27 “ 2,50 1,59 “ 2,60 2,30
“ 4,00 1,60 “ 3,00 1,87 “ 3,00 2,62
22,00 1,00 0,52 “ 5,00 2,88 “ 3,60 3,10
“ 1,50 0,77 30,00 1,00 0,72 “ 4,00 3,40
“ 2,00 1,00 214 “ 1,50 1,07 “ 5,00 4,07
“ 3,00 1,42 “ 2,00 1,40 42,00 2,00 2,00
“ 4,00 1,80 “ 2,60 1,78 “ 3,00 2,93 168
24,00 1,00 0,57 “ 3,00 2,02 “ 6,00 5,40

28 Paul Dr., San Rafael, CA 94903 STOCKING:


• Metric Stainless, Copper & Steel
Phone: 415-492-9202 Precision Tubing
Fax: 415-492-9206 Metric Marine & Industrial • Metric Brass & Steel
E-mail: info@metricmarine.com Compression Fittings
Web: www.metricmarine.com • Metric Refrigeration Tubing
Your Source for European Specialty Tools, Tubing & Fittings
0443-04 5/2/06 11:59 PM Page 1

445-06

Metric Tube & Pipe Bending Equipment

METRIC TUBE FLARING TOOL


Part No. Description
Heavy duty chrome plated flaring tool.
41 170 45° Flare
HYDRAULIC PIPE BENDER Range: 4mm to 16mm
Part No. Description
41 240 Range: 1/2" to 2"
Capacity: 12 Tons
6 bending shoes: 1/2", 3/4", 1", 1-1/4", 1-1/2" & 2"
Weight: 115 lbs. (1 box)
41 241 Range: 1/2" to 3"
Capacity: 15 Tons
8 bending shoes: 1/2", 3/4", 1",1-1/4",1-1/2", 2", 2-1/2" & 3"
Weight: 150 lbs. (2 boxes)

METRIC TUBE CUTTING AND FLARING SET


Part No. Description
High quality set in blow case.
Tube Cutter 3 to 32mm
46 095
Flaring Tool 4 to 16mm
Weight: 4 lbs.

METRIC TUBE BENDERS


Hand-held Lever-Type bender with rubber grips. For bending
annealed copper, aluminum, steel, stainless steel and hard
copper tubing. Calibrated to show angle of bend.
METRIC TUBE BENDER SET
Part No. Size (mm) Length (mm)
Part No. Description Bending Shoe Sizes 44 109 6 250
Ratchet type bender with 44 110 8 250
44 200 7 bending shoes in blow case. 8, 10, 12, 15, 16, 18, & 22 (mm) 44 100 10 325
Wt. 7 lbs. 44 105 12 450
Ratchet type bender with 5 44 111 16 700
44 201 bending shoes, tube cutter & 3/8, 1/2, 5/8, 3/4, & 7/8 (inches) 44 107 18 800
reamer in blow case. Wt. 8 lbs. 44 108 22 800

28 Paul Dr., San Rafael, CA 94903


Large Selection of Metric Tools
Precision Measuring Tools Metric Marine & Industrial Phone: 415-492-9202
Metric Cutting Tools Fax: 415-492-9206
E-mail: info@metricmarine.com
European Specialties
Web: www.metricmarine.com
Your Source for European Specialty Tools, Tubing & Fittings
442 5/2/06 9:04 PM Page 1

446-06

APOLLO INTERNATIONAL CORP.


UNIVERSAL COUPLINGS TWO & FOUR BOLT CLAMPS
Description: Brass, Malleable Iron or Stainless Steel. Washer seal between two Plated Malleable Iron with either two bolts and nuts or four
quick-acting heads. All have same-size attaching heads regardless of hose size. bolts and nuts. For use with interlocking type inserts and
Fingers lock together with quarter turn of rotation. universal couplings.
Application: This coupling is especially recommended for use on air hose and can be
used on water hose (medium or low pressure). Attached to hose with interlocking
clamps or banding.
Brass Malleable Iron 316 Stainless
2-Bolt Type Hose Hose O.D. Malleable
Steel
I.D. From To Iron P/N
Size Part No. Part No. Part No.
3/8" 7223-2 7223-32 *** 1/4" 9/16" 21/32" 7365-0630
1/2" 7223-6 7223-36 7223-136 3/8" 11/16" 7/8" 7365-0632
5/8" 7223-10 7223-40 *** 1/2" 13/16" 15/16" 7365-0649
3/4" 7223-12 7223-42 7223-142 1/2" 15/16" 1-1/16" 7365-0650
Hose End 1" 7223-16 7223-46 7223-146 1/2" 1-1/16" 1-3/16" 7365-0651
3/4" 1-5/32" 1-9/32" 7265-30
Brass Malleable Iron
Size Part No. Part No. 3/4" 1-3/16" 1-5/16" 7365-0652
1-1/4" 7223-20 7223-50 3/4" 1-5/16" 1-1/2" 7365-0653
1-1/2" 7223-66 7223-56 3/4" 1-1/2" 1-11/16" 7365-0654
Hose End 2 7223-24 7223-64

Brass Malleable Iron 316 Stainless


Steel
Size Part No. Part No. Part No.
1/4" 7223-1 7223-11 ***
3/8" 7223-5 7223-35 ***
1/2" 7223-9 7223-39 7223-139
4-Bolt Type Hose Hose O.D. Malleable
3/4" 7223-15 7223-45 7223-145
Female End I.D. From To Iron P/N
1" 7223-19 7223-49 7223-149
1/2" 29/32" 1-1/32" 7365-0968
Brass Malleable Iron 1" 1-13/32" 1-9/16"* 7365-0822
Size Part No. Part No. 1" 1-17/32" 1-23/32" 7365-0812
1-1/4" 7223-23 7223-53 1" 1-11/16" 1-15/16" 7365-0813
1-1/2" 7223-29 7223-59 1" 1-15/16" 2-1/8" 7365-0824
Female End 2 7223-28 7223-58 1-1/4" 1-1/2" 1-25/32" 7365-0814
1-1/4" 1-11/16" 1-7/8"* 7365-0815
Brass Malleable Iron 316 Stainless
Steel 1-1/4" 1-25/32" 2-3/32" 7365-0825
Size Part No. Part No. Part No. 1-1/4" 1-7/8" 2-1/16"* 7365-0826
1/4" 7223-26 7223-76 *** 1-1/4" 2-1/8" 2-3/8" 7365-0919
3/8" 7223-4 7223-34 *** 1-1/2" 1-13/16" 2" 7365-0816
1/2" 7223-8 7223-38 7223-138 1-1/2" 2" 2-7/32" 7365-0817
3/4" 7223-14 7223-44 7223-144
Male End 1-1/2" 2" 2-1/8"* 7365-0212
1" 7223-18 7223-48 7223-148
1-1/2" 2-1/16" 2-1/4"* 7365-0225
Brass Malleable Iron 316 Stainless Steel 1-1/2" 2-3/16" 2-3/8" 7365-9924
Part No. Part No. Part No. 1-1/2" 2-3/8" 2-9/16" 7365-0924
7223-21 7223-31 7223-131 1-1/2" 2-9/16" 2-3/4" 7365-0925
2" 2-1/4" 2-1/2"* 7365-0818
2" 2-11/32" 2-17/32" 7365-9928
4-Bolt Type w/ *4
Blank End 2" 2-1/2" 2-3/4"* 7365-0819
gripping fingers
2" 2-1/2" 2-25/32" 7365-0929
GROUND JOINT COUPLINGS 2" 2-3/4" 3-1/16"* 7365-0820
2" 3-3/32" 3-7/16" 7365-0828
Application: This is a high pressure coupling used on air, steam, spray or water hose. 2-1/2" 3-1/16" 3-1/2"* 7365-9359
2-1/2" 3-3/32" 3-7/16" 7365-9934
2-1/2" 3-1/2" 3-15/16" 7365-0829
3" 3-1/2" 3-3/4"* 7365-0375
3" 3-1/2" 3-15/16" 7365-9935
3" 3-3/4" 4"* 7365-0821
3" 3-3/16" 4-1/16" 7365-0935
3" 4" 4-3/16"* 7365-0830
3" 4-1/16" 4-7/16" 7365-0939
Stem, Wing Nut Male Female Male Double 3" 4-3/16" 4-1/2"* 7365-9450
& Female Spud Stem Wing Nut Spud Spud Spud
Size Part No. Part No. Part No. Part No. Part No. Part No.
1/2" GJS-050 GMS-050 GWN-050 GFS-050 MS-050 DS-050
3/4" GJS-075 GMS-075 GWN-075 GFS-075 MS-075 DS-075
1" GJS-100 GMS-100 GWN-100 GFS-100 MS-100 DS-100
1-1/4" GJS-125 GMS-125 GWN-125 GFS-125 MS-125 DS-125
1-1/2" GJS-150 GMS-150 GWN-150 GFS-150 MS-150 DS-150
2" GJS-200 GMS-200 GWN-200 GFS-200 MS-200 DS-200
2-1/2" GJS-250 GMS-250 GWN-250 GFS-250 MS-250 DS-250
3" GJS-300 GMS-300 GWN-300 GFS-300 MS-300 DS-300
4" GJS-400 GMS-400 GWN-400 GFS-400 *** ***

IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
443 5/2/06 9:05 PM Page 1

447-06

APOLLO INTERNATIONAL CORP.


Cam And Groove
Operation of Cam & Groove. • To connect, slide the adapter into the coupler and with normal hand pressure, press the cam arms
down. • To uncouple, lift the cam arms and remove the adapter.

Aluminum Brass Ductile Iron Polypropylene 316 SS Nyglass


Size
Part No. Part No. Part No. Part No. Part No. Part No.
1/2" 7239-2002 7239-02 7239-4002 7239-3002 7239-1002 7239-5002
PART A – Adapter 3/4" 7239-2031 7239-31 7239-4031 7239-3031 7239-1031 7239-5031
1" 7239-2033 7239-33 7239-4033 7239-3033 7239-1033 7239-5033
1 1/4" 7239-2016 7239-16 7239-4016 7239-3016 7239-1016 7239-5016
1 1/2" 7239-2019 7239-19 7239-4019 7239-3019 7239-1019 7239-5019
2" 7239-2034 7239-34 7239-4034 7239-3034 7239-1034 7239-5034
2 1/2" 7239-2038 7239-38 7239-4038 7239-3038 7239-1038 ***
3" 7239-2044 7239-44 7239-4044 7239-3044 7239-1044 7239-5044
4" 7239-2029 7239-29 7239-4029 7239-3029 7239-1029 7239-5029
Adapter X Female NPT 6" 7239-2092 7239-92 7239-4092 7239-3092 7239-1092 ***
1/2" 7239-2006 7239-06 7239-4006 7239-3006 7239-1006 7239-5006
PART B – Coupler 3/4" 7239-2005 7239-05 7239-4005 7239-3005 7239-1005 7239-5005
1" 7239-2010 7239-10 7239-4010 7239-3010 7239-1010 7239-5010
1 1/4" 7239-2013 7239-13 7239-4013 7239-3013 7239-1013 7239-5013
1 1/2" 7239-2020 7239-20 7239-4020 7239-3020 7239-1020 7239-5020
2" 7239-2035 7239-35 7239-4035 7239-3035 7239-1035 7239-5035
2 1/2" 7239-2039 7239-39 7239-4039 7239-3039 7239-1039 ***
3" 7239-2045 7239-45 7239-4045 7239-3045 7239-1045 7239-5045
4" 7239-2030 7239-30 7239-4030 7239-3030 7239-1030 7239-5030
Coupler X Male NPT 6" 7239-2095 7239-95 7239-4095 7239-3095 7239-1095 ***
1/2" 7239-2096 7239-96 7239-4096 7239-3096 7239-1096 7239-5096
PART C – Coupler 3/4" 7239-2007 7239-07 7239-4007 7239-3007 7239-1007 7239-5007
1" 7239-2012 7239-12 7239-4012 7239-3012 7239-1012 7239-5012
1 1/4" 7239-2024 7239-24 7239-4024 7239-3024 7239-1024 7239-5024
1 1/2" 7239-2017 7239-17 7239-4017 7239-3017 7239-1017 7239-5017
2" 7239-2027 7239-27 7239-4027 7239-3027 7239-1027 7239-5027
2 1/2" 7239-2023 7239-23 7239-4023 7239-3023 7239-1023 ***
3" 7239-2054 7239-54 7239-4054 7239-3054 7239-1054 7239-5054
4" 7239-2050 7239-50 7239-4050 7239-3050 7239-1050 7239-5050
Coupler X Hose Shank 6" 7239-2090 7239-90 7239-4090 7239-3090 7239-1090 ***
1/2" 7239-2003 7239-03 7239-4003 7239-3003 7239-1003 7239-5003
PART D – Coupler 3/4" 7239-2008 7239-08 7239-4008 7239-3008 7239-1008 7239-5008
1" 7239-2009 7239-09 7239-4009 7239-3009 7239-1009 7239-5009
1 1/4" 7239-2014 7239-14 7239-4014 7239-3014 7239-1014 7239-5014
1 1/2" 7239-2022 7239-22 7239-4022 7239-3022 7239-1022 7239-5022
2" 7239-2036 7239-36 7239-4036 7239-3036 7239-1036 7239-5036
2 1/2" 7239-2041 7239-41 7239-4041 7239-3041 7239-1041 ***
3" 7239-2046 7239-46 7239-4046 7239-3046 7239-1046 7239-5046
4" 7239-2048 7239-48 7239-4048 7239-3048 7239-1048 7239-5048
Coupler X Female NPT 6" 7239-2099 7239-99 7239-4099 7239-3099 7239-1099 ***
1/2" 7239-2001 7239-01 7239-4001 7239-3001 7239-1001 7239-5001
PART E – Adapter 3/4" 7239-2086 7239-86 7239-4086 7239-3086 7239-1086 7239-5086
1" 7239-2011 7239-11 7239-4011 7239-3011 7239-1011 7239-5011
1 1/4" 7239-2025 7239-25 7239-4025 7239-3025 7239-1025 7239-5025
1 1/2" 7239-2021 7239-21 7239-4021 7239-3021 7239-1021 7239-5021
2" 7239-2026 7239-26 7239-4026 7239-3026 7239-1026 7239-5026
2 1/2" 7239-2042 7239-42 7239-4042 7239-3042 7239-1042 ***
3" 7239-2056 7239-56 7239-4056 7239-3056 7239-1056 7239-5056
4" 7239-2049 7239-49 7239-4049 7239-3049 7239-1049 7239-5049
Adapter X Hose Shank 6" 7239-2102 7239-102 7239-4102 7239-3102 7239-1102 ***
1/2" 7239-2051 7239-51 7239-4051 7239-3051 7239-1051 7239-5051
PART F – Adapter 3/4" 7239-2004 7239-04 7239-4004 7239-3004 7239-1004 7239-5004
1" 7239-2032 7239-32 7239-4032 7239-3032 7239-1032 7239-5032
1 1/4" 7239-2015 7239-15 7239-4015 7239-3015 7239-1015 7239-5015
1 1/2" 7239-2018 7239-18 7239-4018 7239-3018 7239-1018 7239-5018
2" 7239-2028 7239-28 7239-4028 7239-3028 7239-1028 7239-5028
2 1/2" 7239-2037 7239-37 7239-4037 7239-3037 7239-1037 ***
3" 7239-2043 7239-43 7239-4043 7239-3043 7239-1043 7239-5043
4" 7239-2047 7239-47 7239-4047 7239-3047 7239-1047 7239-5047
Adapter X Male NPT 6" 7239-2104 7239-104 7239-4104 7239-3104 7239-1104 ***

IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
444 5/2/06 9:06 PM Page 1

448-06

MANN TEK

DRY DISCONNECT COUPLINGS


For connecting and disconnecting hoses and pipelines quickly and without spillage.
A turn of 15° clockwise locks the coupler to the adaptor, keeping the piston valves closed in this position. The valves are
opened when the unit is turned 100° further and is closed when a similar turn is made counter-clockwise. All flow is
stopped and a disconnect can be made.

For:
• ship-to-shore, ship-to-ship, ship-to-rig transfers
• marine refueling
• vapor recovery
• ship manifold exchange
• rig gas exchange or temporary vent lines
• wellhead material supply

CONSTRUCTION
Material
Aluminum
Brass/Gunmetal
Stainless Steel AISI 316 1.4571
Hastelloy C-276
Closed Open
Sealing Material
FPM (Viton®) [standard] – For high temperatures, Flat Seal for Threads
synthetic and hydraulic fluids, and a wide range of PUR/Polyurethane
chemicals and heavily oxidizing acids (at medium Teflon® (PTFE)
temperatures).
Temperature: -30°C/-20°F up to +200°C/+400°F Working Pressure
EPDM – Non-flammable hydraulic fluids (e.g., phosphoric Aluminum: PN16 – 230 psi
esters) and fire extinguisher liquids (e.g., Brass/Gun Metal: PN25 – 360 psi
chlorobromomethane). Stainless Steel: PN25 – 360 psi
Temperature: -50°C/-60°F up to +150°C/+300°F
HNBR – Heat-resistant Nitrile Body Sizes
Temperature: -40°C/-40°F up to +150°C/+300°F 56 mm – 3/4" or 1"
NBR (Nitrile) – For petroleum-based hydraulic and 70 mm – 1-1/2" or 2"
lubricating oils, and animal and vegetable oils 105 mm – 2-1/2" or 3"
Temperature: -40°C/-40°F up to +100°C/+210°F 119 mm – 3"
PFPM (Kalrez®) – Superior compound for high tempera- 164 mm – 4"
tures and most chemicals. Combines the chemical
properties of PTFE with the mechanical properties of Thread
FPM. NPT (ANSI B1.20.3)
Temperature: -40°C/-40°F up to +260°C/+500°F BSP (DIN-ISO 228)
FFKM (Chemraz®) – A good alternative to PFPM.
Temperature: -30°C/-20°F up to +230°C/+440°F Flange Units
FMVQ (Fluorosilicone) – For low temperatures, DIN, ASA, TW, TTMA
petroleum-based fuel, oils and lubricants, silicone fluids
and silicone esters, and di-ester oils.
Temperature: -50°C/-60°F up to +230°C/+440°F

Atlanta, GA 770.486.9619 Kansas City, MO 816.931.1190


Charlotte, NC 704.376.5755 Los Angeles, CA 909.605.6400
Chicago, IL 800.323.4440 Portland, OR 503.289.0400
Cleveland, OH 330.425.3000 Salt Lake City, UT 801.972.1180
Gloversville, NY 518.725.0998 Tampa, FL 813.247.3500
Houston, TX 713.678.4291 The Right Connection™
Toll Free Phone: 877.963.4966 • Toll Free Fax: 800.283.4966 • E-mail sales: sales@dixonvalve.com • www.dixonvalve.com
0447-04 5/2/06 9:06 PM Page 459

449-06

MMC INTERNATIONAL CORP.


C-L COUPLINGS
with Built-in Safety Ratchet Lock
Ratchet C-L couplings provide quick, safe connections on a wide Each ratchet cam is individually locked into place so that
range of applications: Both marine and dockside hoses, manifolds, it cannot be loosened without a special wrench (see below).
loading arms, valves. Each corrosion-resistant coupling A typical 3-cam connection is completed in less than
(depending on its diameter) contains from three to ten helical cams. a minute.

1 2 3
Here a ratchet C-L coupling (studded Secure the matching flange to the C-L The dedicated wrench tightens each
configuration) is bolted to an existing coupling by rotating each cam to a helical cam with a wedging action
ASA hose flange for a one-time hard stop using the bronze spanner that in turn compresses the O-ring
permanent installation. The coupling wrench which is supplied. seal, preventing cam from opening.
is then ready to be joined to a
matching flanged hose, manifold or
pipe of comparable diameter.

Dimensions Table 150 #ASA

Approx. Wt.
Flange O.D.

Dimensions
Number of

Maximum
Thickness

Minimum
Pipe Size
Nominal

Number
of Studs
Locking

Locking
Flange

Range

Range
Cams

(lbs.)
Stud
Seal
I.D.

2" 6" 3/4" 2-7/8" 2 11/16" 1-3/16" 4 5/8" x 2-1/2" 37


3" 7-1/2" 15/16" 4" 2 11/16" 1-3/16" 4 5/8" x 2-1/2" 38
4" 9" 15/16" 5-1/8" 3 11/16" 1-3/16" 8 5/8" x 2-1/2" 43
5" 10" 15/16" 6-5/16" 3 11/16" 1-3/16" 8 3/4" x 3-1/8" 45
6" 11" 1" 7-5/16" 3 3/4" 1-1/4" 8 3/4" x 3-1/8" 57
8" 13-1/2" 1-1/8" 9-13/32" 3 7/8" 1-3/8" 8 3/4" x 3-1/8" 76
10" 16" 1-3/16" 11-9/16" 4 15/16" 1-7/16" 12 7/8" x 3-1/2" 88
12" 19" 1-1/4" 13-3/8" 4 1" 1-1/2" 12 7/8" x 3-1/2" 125
14" 21" 1-3/8" 15" 5 1-1/8" 1-5/8" 12 1" x 4-1/8" 153
Disengagement: This close-up view shows
collar of wrench applying side pressure on 16" 23-1/2" 1-7/16" 16-15/16" 6 1-5/16" 1-11/16" 16 1" x 4-1/8" 190
pawl stub (arrow) to release locking pawl 20" 27-1/2" 1-11/16" 21-1/2" 10 1-1/2" 1-7/8" 20 1-1/8" x 4-3/8" 272
from ratchet teeth. Cam will now rotate
freely, disengaging connection. A detailed instruction manual is supplied with every shipment.

TM
MMC International Corporation MMC (Europe) Ltd. MMC (Asia) Ltd.
60 Inip Drive So. Nelson Rd., So. Nelson Industrial Estate 7-7, 2-Chome
Inwood, NY 11096-0664 U.S.A. Cramlington, Northumberland Kotonoo-Cho
Keeping You In Control Phone: 1-800-645-7339 NE23 9WF UK Chuo-ku, Kobe 651 Japan
1-800-645-7339 Fax: 1-516-371-3134 Phone: (01670) 738111 Phone: (078) 251-1033
See other MMC products E-mail: mmcinwd@aol.com Telex: 537005 MARINE G Telex: 5624163 OPECK J
elsewhere in this catalog. Web Site: http://www.mmcintl.com Fax: (01670) 738789 Fax: (078) 252-0265
446 5/2/06 9:07 PM Page 448

450-06

RED WING SHOE CO.


STEEL-TOE SHOES
Style 2233 Style 6668
8” Work Boot Oxford
• Cushion insole for support • Waterproof full grain brown leather upper
• Dual density sole with • Moisture wicking lining with an anti-microbial agent
mini-lug pattern for traction • Plate for torsion control; molded shank
and comfort • Abrasion, slip, and oil resistant, non-marking
• Steel toe urethane outsole
• Resistant to oil, gas, • ANSI Z41 PT 99 C/75 I/75 EH
chemicals and abrasion

Style 6615 Style 2231


Oxford 11” Pull-On
• Full grain upper leather • Leather upper
• Leather lined • Lined vamp for stay dry
• ANSI approved, Type 1 SD comfort
• Single density urethane sole for • Shock-absorbing cushion
lightweight flexibility and traction insole with arch lift
• Steel toe • Mini-lug, slip-resistant,
• Electro-Static dissipative non-marking urethane
• Resistant to oil, gas, chemicals sole
and abrasion • ANSI Z41 PT 99 C/75 I/75
Men’s Sizes (U.S.)
Width AA A B C D E EE EEE
Style 2233 10 - 14 10 - 14 8 - 16 8 - 13 4 - 18 6 - 14 7 - 14 6 - 15
Style 6668 9 - 15 6 - 15 6 - 14
Style 6615 10 - 14 7 - 14 7 - 13
Style 2231 10 - 14 10 - 13 4 - 18 8 - 13 5 - 18 6 - 14 7 - 18 6 - 14

The items above and below this message are from different manufacturers.

APOLLO INTERNATIONAL CORP.


HOSE HANDLING SLINGS
Hose handling slings are designed for cargo hose and should
be used in choker hitch only. Use one sling for every 15 feet
of hose. These slings support the hose properly, eliminating
kinking and cutting. Fabricated of 100% nylon.

Model Hose Sling Sling Choker


No. Dia. Width Length Capacity
HH-O 3” 4” 40” 3,000 lb.
HH-1 4” 4” 42” 3,000 lb.
HH-3 6” 6” 54” 4,000 lb.
HH-4 8” 8” 60” 5,000 lb.
HH-5 10” 10” 108” 6,000 lb.

WIDE SUPPORT HOSEBUNS


Hosebuns are designed to hold cargo hose at the
appropriate bend radius. Fabricated of 100% urethane.
Model Hose Sling Sling Choker
No. Dia. Length Width Length Capacity
HB3-3 3” 9.8” 1.75” 30.5” 1,500 lb.
HB4-3 4” 11.5” 1.75” 34.5” 1,500 lb.
HB6-15 6” 21.5” 4.00” 39.0” 8,000 lb.
HB8-20 8” 30.0” 6.00” 50.0” 12,000 lb.
HB10-25 10” 41.0” 8.00” 62.0” 15,000 lb.

IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
0461-03 5/2/06 9:08 PM Page 461

451-06

APOLLO INTERNATIONAL CORP.

COMPOSITE HOSE FOR CHEMICALS & OILS


Style 1052 for Chemicals and Oils Style 100P for Vapor Recovery

Construction and Service


Composite hose is constructed of multiple layers of polypropylene films
and fabrics, reinforced with inner and outer spiral wire helixes. A polar
fluid-resistant barrier layer is an integral part of the hose construction.
The inner wire helix material varies with application; see table below.
The outer wire helix is usually high-tensile galvanized carbon steel.
Stainless steel outer wire is also available—specify when ordering.
The outer cover is weather- and abrasion-resistant PVC-impregnated
polyester fabric. This construction results in a light and very flexible hose
capable of a wide range of services at temperatures up to 212°F (100°C).

Testing and Approvals


Each composite hose is hydrostatically tested at one and one half times
working pressure before shipment. Hose is also tested for electrical
continuity. Each hose is individually serialized and delivered with its
own test certificate. These hoses are type approved by or meet the To Order
requirements of the U.S. Coast Guard, IMO, Lloyds Register of Shipping, Specify type of hose (from tables below), and length
DNV, Nippon Kaiji Kyokai, and other societies and government agencies. and diameter. Specify code number of end fittings.

Composite Hose Specs Composite Hose Types


Inside Working Burst Minimum Weight Maximum Type Service Inner Wire Tube Cover Color
Diameter Pressure Pressure Bend Radius Per Foot Length 1052 G Petroleum Galvanized Steel Polypropylene Blue
4” 200 psi 1000 psi 16” 4.4 lbs. 65’ Polypropylene
1052 P Chemical Polypropylene Black
6” 200 psi 1000 psi 20” 7.0 lbs. 65’ Coated Steel
8” 200 psi 1000 psi 29” 12 lbs. 65’ 1052 S Chemical Stainless Steel Polypropylene Green
10” 150 psi 800 psi 36” 15 lbs. 40’ Aggressive
1052 T Stainless Steel Teflon Red
Chemical
NOTE: Code 100 P Vapor Recovery Hose has a working pressure of 100 psi Vapor Polypropylene
and a burst pressure of 400 psi. Special flanges are used and hose support is 100 P Polypropylene Yellow
Recovery Coated Steel
required, as per USCG regulations 33CFR154.810 and 154.80 Section 7.

COMPOSITE HOSE END FITTINGS


Type CSFX – Carbon steel ends with fixed carbon steel flanges.
Type SSCF – 316 stainless steel stub ends with floating carbon steel flanges.
Type SSFX – 316 stainless steel ends with fixed 316 stainless steel flanges.
Type SSSF – 316 stainless steel ends with floating 316 stainless steel flanges.
Type CSFL – Carbon steel ends with floating carbon steel flanges.
NOTE: Standard flange drilling is 150# ASA. 100 P Vapor Hose has special flanges. CSFX SSCF
SSFX SSSF
CSFL

IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
0450-04 5/2/06 9:09 PM Page 1

452-06

FLEXTRACO B.V.
VAPOR RECOVERY COMPOSITE HOSE
HOSE TYPES
Code Service Inner Tube Cover
Wire Color
0864-GG Oil/Solvents Galvanized Polypropylene Yellow
Steel
0464-SG Chemical Stainless Polypropylene Yellow
Steel 316
0446-SG Chemical Stainless Teflon Yellow
Steel 316
Stainless steel outer wire on request

Inside Working Min. Bend Approx. Maximum


Diameter Pressure Radius Weight Length
Inch mm PSI Bar Inch mm Lbs/Ft kg/m Ft MTR Recommended for vapor recovery
2 50 100 7 5 125 1,000 1,50 65 20 systems in tanktruck, bottom loading,
3 75 100 7 7 175 1,75 2,60 65 20 inplant and ship to shore applications
4 102 100 7 11 275 2,55 3,80 65 20 complies with USCG Marine vapor
5 125 100 7 14 360 3,05 4,50 65 20 control systems 33 CFR part 154.810.
6 152 100 7 16 410 3,60 5,30 65 20
8 204 100 7 22 560 8,05 11,90 65 20
10 254 100 7 30 760 10,35 15,30 50 15
Safety factor 4 : 1. Temperature Range: -30°C to +100°C, -22°F to +212°F.

SUBMERSIBLE COMPOSITE HOSE


HOSE TYPES
Code Service Inner Tube Cover
Wire Color
0904-GG Oil/Solvents Galvanized Polypropylene White
Steel
0916-PS Chemical Polypropylene Polypropylene White
Coated Steel
0914-SS Chemical Stainless Polypropylene White
Steel 316
0924-SS Chemical Stainless Teflon White
Steel 316
Stainless steel outer wire on request

Inside Working Min. Bend Approx. Maximum


Diameter Pressure Radius Weight Length
Inch mm PSI Bar Inch mm Lbs/Ft kg/m Ft MTR
1-1/2 38 200 14 4-1/2 112 0,85 1,25 65 20
2 50 200 14 5-1/2 140 1,35 2,00 65 20 Recommended for use with submersible
2-1/2 63 200 14 6-1/2 165 1,75 2,60 65 20 pumps and for all other applications where
3 75 200 14 9 230 2,50 3,70 65 20 the hose is exposed to the product, both
4 102 200 14 15 380 4,40 6,50 65 20 inside and outside.
5 125 200 14 17 435 5,80 8,60 65 20
6 152 200 14 18 460 7,00 10,50 65 20
8 204 200 14 27 690 12,00 18,00 65 20
Safety factor 4 : 1. Temperature Range: -30°C to +100°C, -22°F to +212°F.

P.O. Box 60 Tel: +31 (0) 10-521 85 33


2665 ZK Bleiswijk Fax: +31 (0) 10-521 84 20
The Netherlands E-Mail: info@amova.nl
www.amova.nl
SEE OUR AD IN THE ADVERTISING SECTION
0451-04 5/2/06 9:09 PM Page 1

453-06

FLEXTRACO B.V.

INSULATING FLANGE
Sized from 4” to 16”

SPECIFICATIONS FOR INSULATING FLANGE

Material Nylon Teflon/PTFE


Tensile 21 N/mm2 76 N/mm2
Elastic Modus at 23 C 480 MPa 3250 Mpa
Melting Point 310°C 140°C
Flammability Self-extinguishing Self-extinguishing
Electrical resistance >1014 >1017

Insulating Flanges are available in ASA – DIN and JIS specifications

STANDARD DUTY COMPOSITE HOSE


HOSE TYPES
CODE SERVICE INNER WIRE TUBE COVER
COLOR
0804-GG OIL/SOLV. GALVANIZED POLYPROPYLENE BLUE
STEEL
0416-PG CHEMICAL POLYPROPYLENE POLYPROPYLENE BLACK
COATED STEEL
0414-SG CHEMICAL STAINLESS POLYPROPYLENE GREEN
STEEL 316
0424-SG CHEMICAL STAINLESS TEFLON RED
STEEL 316

Stainless Steel outer wire on request

TECHNICAL DATA HEAVY DUTY MARINE


RECOMMENDED FOR USE AS INSIDE WORKING MIN. BEND. APPROX. MAXIMUM
DIAMETER PRESSURE RADIUS WEIGHT LENGTH
A TANKTRUCK, RAILCAR AND
INCH MM PSI BAR INCH MM LBS/FT KG/M FT MTR
INPLANT TRANSFER HOSE
1 25 150 10 4 100 0,65 1,00 65 20
COMPLIES WITH BS 5842 1-1/4 32 150 10 4-3/4 120 0,75 1,12 65 20
1-1/2 38 150 10 5-1/4 130 0,85 1,25 65 20
2 50 150 10 6-1/2 165 1,20 1,80 65 20
Temperature Range: 2-1/2 65 150 10 7-1/2 185 1,70 2,50 65 20
-30°C to +90°C 3 80 150 10 9-1/2 240 2,00 3,00 65 20
-22°F to +194°F 4 100 150 10 14-1/2 360 3,00 4,50 65 20
Safety factor 5:1

P.O. Box 60 Tel: +31 (0) 10-521 85 33


2665 ZK Bleiswijk Fax: +31 (0) 10-521 84 20
The Netherlands E-Mail: info@amova.nl
www.amova.nl
SEE OUR AD IN THE ADVERTISING SECTION
0464-03 5/2/06 9:10 PM Page 464

454-06

FLEXTRACO B.V.
COMPOSITE CRYOGENIC HOSE

Code 0050 Code 0050 is recommended for use with fully refrigerated conveyants for in-plant
and ship-to-shore applications including the following:
Temperature Range: –50°C to +50°C
–58°F to +122°F Ammonia Butylene Methyl Bromide
Acetaldehyde Dimethylamine Propane
CONSTRUCTION: Butadiene Ethylamine Propadiene
Inner Wire: 316 Stainless Steel Butane/Propane Ethyl Chloride Propylene
Outer Wire: 316 Stainless Steel Butane Methyl Acetylene Vinyl-Chloride
Material: Polyamide Liquid Ethylene at –105°C (–157°F)
Cover: White Liquid Ethane at –88°C (–126°F)

Inside Working Min. Bend Approximate Max.


Diameter Pressure Radius Weight Length
in. mm psi bar in. mm lbs./ft. kg/m ft. m
1.5 38 350 25 7 175 1.10 1,50 65 20
2 50 350 25 7.5 185 1.55 2,30 65 20
2.5 65 350 25 9.5 240 2.15 3,20 65 20
3 80 350 25 11 280 2.95 4,40 65 20
4 100 300 21 20 500 4.95 7,30 65 20
5 125 300 21 24 610 7.75 11,50 65 20
6 150 300 21 26 660 9.45 14,00 65 20
8 200 200 14 37 940 12.75 18,90 65 20
10 254 150 10 75 1905 15.00 23,00 50 15
Safety factor 5:1

Code 0200 is recommended for use with fully refrigerated conveyants such as
Code 0200 liquid nitrogen and L.N.G. for in-plant and ship-to-shore applications.
Type approved as complying with par.
5.7 and 5.4 of the IMO Code
Inside Working Min. Bend Approximate Max.
Temperature Range: –200°C to +50°C Diameter Pressure Radius Weight Length
–328°F to +122°F in. mm psi bar in. mm lbs./ft. kg/m ft. m
1 25 150 10 6 150 0.60 0,90 65 20
CONSTRUCTION:
1.5 38 150 10 7 175 0.80 1,20 65 20
Inner Wire: 316 Stainless Steel
2 50 150 10 7.5 185 1.55 2,30 65 20
Outer Wire: 316 Stainless Steel
3 80 150 10 11 280 2.95 4,40 65 20
Material: Polyester
4 100 150 10 20 500 4.95 7,30 65 20
Cover: White
5 125 150 10 24 610 7.75 11,50 65 20
6 150 150 10 26 660 9.45 14,00 65 20
8 200 150 10 37 940 12.75 18,90 65 20
10 250 150 10 75 1905 15.00 23,00 50 15
Safety factor 5:1

P.O. Box 158 Tel: +31 (0) 10-521 54 22


2665 ZK Bleiswijk Fax: +31 (0) 10-521 84 20
The Netherlands E-Mail: flexnl@euronet.nl
Manufacturer of Composite Hose
See our ad in the Advertising Section
www.flextraco.com
Titan 451 5/2/06 9:11 PM Page 1

455-06

TITAN INDUSTRIES
DOCK HOSES END FITTINGS
SW339 & EW339 - 200 PSI
HEAVY-DUTY OIL SUCTION
AND DISCHARGE HOSE

Designed specifically for transferring petroleum products to


and from tankers, barges and storage tanks. Resistant up to
50% aromatics. Smooth or corrugated construction (specify
when ordering). Meets all USCG requirements.
INTERNALLY EXPANDED STEEL MALE
Steel Male Pipe Threads with Ferrule
Tube: SW339: Extruded Nitrile. EW339: Nitrile.
4" TIX40T
Reinforcement: Multiple plies of polyester yarn with dual wire helix. 6" TIX60T
Cover: Oil resistant synthetic rubber. 8" TIX80T
Temperature Rating: -40° to +180°F.

I.D. O.D. Bend Working Weight Vacuum Standard Max.


Radius Pressure* lb./ft. Rating Lengths Length
SW339
4" 5-3/16" 16" 200 5.82 Full – 100 ft.
6" 7-1/4" 36" 200 9.43 Full – 100 ft.
8" 9-1/4" 48" 200 12.40 Full – 100 ft.
EW339 Fixed Flange End
6" 7-1/8" 36" 200 8.00 Full 25, 30, 50 ft. 50 ft.
8" 9-1/4" 48" 200 13.30 Full 25, 30, 50 ft. 50 ft.
10" 11-15/32" 60" 200 20.00 Full 25, 30, 50 ft. 50 ft.
12" 13-9/16" 72" 200 27.00 Full 25, 30, 50 ft. 50 ft.
* 4 to 1 Safety Factor
SW339 Specify length (up to 100 ft.) and end fittings (at right) when ordering.
EW339 Specify length (up to 50 ft.) when ordering. Furnished with 150 lb. or 300 lb. Floating Flange End
fixed or floating flanges.

SWAGED OR INTERNALLY EXPANDED


SW355 - 300 PSI With Stem and Ferrule
HIGH-PRESSURE OIL SUCTION
AND DISCHARGE HOSE 150# Fixed Flange End
4" TIX40F150
Designed for barge applications. Up to 60% aromatics
6" TIX60F150
protection. Lightweight construction provides excellent
8" TIX80F150
flexibility for handling ease.
150# Floating Flange End
Tube: Extruded black nitrile.
Reinforcement: Multiple plies of polyester with dual wire helix. 4" TIX40FL150
Cover: Specially compounded nitrile. 6" TIX60FL150
8" TIX80FL150
Temperature Rating: -40° to +180°F.
300# Fixed Flange End
I.D. O.D. Bend Working Weight Vacuum Standard Max.
Radius Pressure* lb./ft. Rating Lengths Length 6" TIX60F300
8" TIX80F300
3" 4" 12" 300 2.84 Full – 100 ft.
4" 5" 16" 300 3.84 Full – 100 ft. 300# Floating Flange End
6" 7" 36" 300 7.38 Full – 100 ft.
6" TIX60FL300
* 4 to 1 Safety Factor 8" TIX80FL300
Specify length (up to 100 ft.) and end fittings (at right) when ordering.

“Se Habla Español” Phone: 713-641-2288


Fax: 713-641-3636
4380 South Wayside Toll Free: 800-532-2672
Suite 100 E-mail: sales@accordintl.com
Houston, TX 77087 INTERNATIONAL, INC. www.accordintl.com
452 5/2/06 9:12 PM Page 466

456-06

TITAN INDUSTRIES
DOCK HOSES

EW401 VAPOR RECOVERY HOSE


EWC401 CORRUGATED VAPOR RECOVERY HOSE EW339RB ROUGH BORE DOCK HOSE
Rough bore dock hose with flat inner wire is specially
For Vapor Recovery service. Electrically continuous (Maximum
designed for heavy duty service and the severe and rough
resistance 10,000 ohms). Conforms to U.S.C.G., Title 33, Part 154, conditions of loading and unloading of tankers and barges.
Section 154.810. Suitable for up to 50% aromatics.
Meets all the required construction and performance
Tube: Black nitrile
specifications for major refineries. Manufactured with built-in
Reinforcement: Multiple plies high tensile synthetic cord with dual
nipples and carbon steel fixed or floating flanges anchored to
carbon steel wire helix. the hose body. Steel flat inner wire rein-forcement is bonded
Cover EW: Black nitrile blend - Each end marked red/yellow/red to a built-in nipple at each end of the hose to eliminate the
branding with the word “VAPOR” stenciled in black. hazards of static electricity when the fittings are properly
grounded.
Cover EWC: Corrugated black nitrile blend - Each end marked
red/yellow/red branding with the word “VAPOR” stenciled in black. Tube: High grade black Nitrile
Reinforcement: Flat HD/MB Class 1 steel wire helix with
Capable of withstanding 2.0 psi vacuum without collapsing or multiple plies of polyester tire cord and spiral wire helix
constricting. between the plies
Cover: Oil Resistant Synthetic Rubber
Bend Weight Working
Radius lb./ft. Pressure Ends: Built-in Nipples with 150# fixed or floating flanges
I.D. O.D.
psi* Temperature: Up to +180°F
EW EWC EW EWC
4" 4.95" 20" 18" 4.20 3.80 25 Bend Working Couplings
6" 6.95" 30" 28" 6.50 5.90 25 I.D. O.D. Plies Radius Pressure Wt./ft. Wt./Set Vacuum
8" 9" 38" 36" 8.80 8.20 25 psi*
10" 11" 48" 45" 14.00 13.50 25 6” 8” 6 36” 200 15.1# 100# Full
12" 13.1" 60" 56" 18.00 17.00 25
14” 14.75" 68" 64" 24.00 22.00 25 8" 10.2" 6 48” 200 20.8# 150# Full
16” 16.75" 78" 74" 28.00 25.00 25 10" 12.3" 8 60” 200 31.5# 200# Full
* 4 to 1 Safety Factor * 4 to 1 Safety Factor

EW460RB MOLTEN SULPHUR HOSE


SW399 VITON OIL SUCTION Modified rough bore construction handles +300°F. Heat
& DISCHARGE HOSE and chemical resistant EPDM cover with a high grade
EPDM tube.
Specially-constructed tube will handle
high aromatics and petrochemicals. Tube: High grade EPDM
Arana construction for greater flexibility. Carcass: Multiple plies polyester tire cord with wire helix.
Dual helix allows full vacuum capabilities. Cover: Black EPDM.
Available in swaged end styles. Meets all USCG requirements.
Temperature Rating: -40° to +300°F.
Tube: FKM (Viton® or equivalent). Ends: Built-in 150# flanged nipples.
Reinforcement: Multiple plies of polyester with helix wire. Testing: Standard USCG Cert.
Cover: Oil resistant synthetic rubber. Specify length (to 50 ft.) when ordering.
Temperature Rating: -40° to +180°F.
Specify length (up to 100 ft.) when ordering. Bend Working Weight
I.D. O.D. Radius Pressure lb./ft.
Bend Working Weight Vacuum psi*
I.D. O.D. Radius Pressure lb./ft. Rating 6" 8" 42" 200 12
psi*
8" 10.25" 54" 200 20
4" 5-3/16" 24" 250 6.53 Full 10" 12.25" 66" 200 28
6" 7-3/8" 36" 250 9.62 Full * 5 to 1 Safety Factor
* 4 to 1 Safety Factor

“Se Habla Español” Phone: 713-641-2288


Fax: 713-641-3636
4380 South Wayside Toll Free: 800-532-2672
Suite 100 E-mail: sales@accordintl.com
Houston, TX 77087 INTERNATIONAL, INC. www.accordintl.com
455-04 5/2/06 9:13 PM Page 1

457-06

TITAN INDUSTRIES

MILITARY SPECIFICATION HOSE


SPECIFICATION PART # SIZES DESCRIPTION

Hose assemblies rubber synthetic liquid petroleum fuels


MIL-PRF-11588G Type III&IV SS258 1”-4”
dispensing (tan cover)

MIL-PRF-11588G Type III & IV SS278 1”-4” Hose assemblies rubber synthetic liquid petroleum fuels
dispensing (black cover)

MIL-PRF-370J Type I SS170 1”-6” Soft gas discharge/static wire with tan or black cover

MIL-PRF-370J Type II SW370 1”- 6” Hardwall gasoline suction with tan or black cover

USDA Fire Suction & Discharge SW384 1”,11/2” , 21/2” Forestry suction hose
5100-184b Nov 1979
Revision 2 Dec 1982

A-A-59566 Grade B Class 1 SW322 1”-6” Water suction hose

A-A-59566 Grade B Class 2 SW323 1”-6” Water suction hose

A-A-59566 Grade A Class 1 SW326 1”-6” Water suction hose

A-A-59566 Grade A Class 2 SW328 1”-6” Water suction hose

MIL-DTL-27516E SW376 1”-6” Jet fuel and gasoline hose


MIL-DTL-6615F SS166 11/2”-4” Fuel and water hose with static conductive tube
Type II with no static wire
MIL-DTL-6615F SS167 11/4”-4” Fuel & water hose w/static conductive tube and static wire
Type I with static wire

MIL-DTL-20176G Type I & Type II SW346 21/2”-4” Sewage and oily waste hose

MIL-H-17902 F (SH) Type CC SS217 21/2” Aircraft fueling collapsible type

MIL-H-17902 F (SH) Type NC SW391 11/2” Aircraft fueling non-collapsible

ZZ-H-601 E Grade 1 Class 1 SS266 11/4”-4” Water discharge, non-potable

ZZ-H-601 E Grade 1 Class 2 SS267 1”-4” Water discharge-potable water use

ZZ-H-601 E Grade 3 Class 2 SS268 1”-4” Water discharge-potable water use

API 1529/98 5th Edition Type C Grade 1 SS124 1”-11/2” Aviation refueling hose

API 1529/98 5th Edition Type C Grade 2 SS244 11/2”-4” Aviation refueling hose

BS EN1361:1997 Type E SW344 11/2”-4” Aviation fueling & defuel British Standard

11121 Garfield Avenue


South Gate, CA 90280
TITAN INDUSTRIES 800-242-HOSE(4673)
Manufacturer of Industrial Hose Fax: 562.869.05.92
Email: sales@titanindustries.com
www.titanindustries.com
454 5/2/06 9:14 PM Page 1

458-06

Water Suction & Discharge Hose


SPECIFICATIONS
Bend Vacuum
I.D. x O.D. Max. WP Wt.
Radius Rating
in. psi Mpa in in./HG lb./ft. SPECIFICATIONS
Bend Vacuum
3/4 x .98 130 .90 3.25 29 .18 I.D. x O.D. Max. WP Wt.
Radius Rating
1 x 1.24 106 .73 4.5 29 .25 in. psi Mpa in in./HG lb./ft.
1-1/4 x 1.53 99 .68 5.0 29 .32 1 x 1.26 85 .59 4.5 29 .26
1-1/2 x 1.78 89 .61 6.0 29 .37 1-1/4 x 1.53 85 .59 5.0 29 .34
2 x 2.32 79 .54 8.0 29 .61 1-1/2 x 1.76 80 .55 6.0 29 .40
2-1/2 x 2.85 65 .45 10.0 29 .87 2 x 2.35 71 .49 8.0 29 .66
3 x 3.41 65 .45 12.0 29 1.08 2-1/2 x 2.85 66 .46 10.0 29 .84
4 x 4.46 55 .38 16.0 29 1.69 3 x 3.43 65 .45 12.0 29 1.22
6 x 6.57 47 .32 36.0 29 3.05 4 x 4.52 61 .42 16.0 29 1.86
8 x 8.92 40 .28 60.0 20 6.35 6 x 6.65 47 .32 36.0 29 3.37
10 x10.93 35 .24 100.0 20 8.75

586-411 586-401
Designed for water suction and discharge service in construction A heavy duty water suction and discharge hose for industrial,
and septic tank cleaning operations, and for general industrial construction, agricultural, mining, and other applications where
and agricultural applications where mild chemical resistance low-temperature flexibility is required.
is required. Flexible to –30°F. Compounded to remain flexible at
Lightweight and Easy to Handle. It is especially suited to temperatures as low as –30°F (–34°C). In static applications,
field and outdoor applications because it remains flexible at it will perform at temperatures as low as –30°F (–34°C) and
temperatures for 15°F to 158°F (–9°C to 70°C), exhibits excellent as high as 150°F (65°C).
ozone and weather resistance, and resists cracking and flaking. Construction:
Construction: Tube: Blue PVC synthetic compound*
Tube: Olive green PVC compound Reinforcement: White rigid PVC compound helix
Reinforcement: High-density white rigid PVC compound helix Lengths: 1" – 6" 100 ft. lengths, coiled and polywrapped
Safety Factor – 3:1 burst
Fittings: Short shank aluminum, quick-disconnect aluminum,
Lengths: 3/4" – 6" 100 ft. lengths; 8" – 10" 20 ft. lengths, and aluminum combination nipples. Brass and malleable iron
coiled and polywrapped are compatible.
Fittings: Short shank aluminum, quick-disconnect aluminum, *Medium/High Oil Resistance – RMA designation Class B
and aluminum combination nipples. Brass and malleable iron
short shank, quick-disconnect and combination nipples are
also compatible.

Water Discharge Hose


537-521
For medium-duty discharge applications in mining, SPECIFICATIONS
construction, industry, agriculture and marine service.
Temperature range: –10°F to 150°F (–23°C to 65°C) I.D. x O.D. Max. WP Wt.

Construction: in. psi Mpa lb./ft.


Tube: Black PVC compound *1-1/2 x 1.71 150 1.03 .23
Reinforcement: Spiral synthetic yarn, one layer *2 x 2.24 150 1.03 .36
longitudinal synthetic yarn *2-1/2 x 2.79 150 1.03 .41
Cover: Red PVC compound, MSHA 2G-14C/16
*3 x 3.29 125 .85 .46
Safety Factor: 3:1 burst
*4 x 4.32 100 .69 .73
Lengths: 300 ft. continuous length, coiled and banded *6 x 6.40 100 .69 1.18
Fittings: Short shank aluminum, quick-disconnect, * Built .090" oversize to facilitate coupling hose. The
flat seal coupling, aluminum combination nipple and above working pressures and vacuum ratings are based
expansion ring type. on ambient temperature of above 72°F (22°C) and will
vary inversely with temperature changes.

Master Distributors for


Allied Packing and Rubber, Inc.
1335 West Eleventh Street, Long Beach, CA 90813
Phone: (562) 435-2411 • Fax: (562) 436-2140

goodyear
455 5/12/06 1:49 AM Page 1

459-06

Material Handling Hose


SPECIFICATIONS
I.D. x O.D. Max. WP Weight
SPECIFICATIONS
in. mm psi Mpa lb./ft. kg./m.
I.D. x O.D. Max. WP Bend Radius Weight
4 x 4.42 101.6 x 112.3 50 .34 1.38 2.06 in. psi Mpa in. lb./ft. kg./m.
*4x 4.59 102.1 x 116.7 50 .34 1.93 2.87 2 x 2.51 75 0.52 5.0 1.06 1.58
5 x 5.44 127.0 x 138.2 50 .34 1.82 2.71 2-1/2 x 3.00 75 0.52 6.0 1.35 2.01
6 x 6.45 152.4 x 163.8 50 .34 2.25 3.35 3 x 3.53 75 0.52 7.0 1.84 2.74
*3/16" gauge tube 4 x 4.63 75 0.52 10.0 2.49 3.71

549-152 (1/8" tube gauge)


549-149 (3/16" tube gauge) 549-856
For conveying hot non-oily air from compressors to holding tanks
549-148 (1/4" tube gauge) used in the transfer of bulk dry materials. Capable of handling
Designed for the discharge of dry bulk cement in tank truck and temperatures –40° to 400°F (–40° to 204°C).
in-plant service. Capable of handling temperatures of –25° to 180°F Long Hose Life. Made with a heat-resistant tube and cover
(–31° to 82°C). capable of withstanding temperatures up to 400°F for long
Static Conductive for Safety. The tube is made with static service life.
conductive synthetic rubber to reduce the possibility of static Construction:
charge build-up when hose is properly grounded. Tube: Black heat-resistant synthetic rubber
Lengths: 100 ft. lengths.; coiled & polywrapped Reinforcement: Spiral-plied synthetic fabric with double wire helix
Construction: Cover: Black, weather-resistant synthetic rubber
Tube: Static dissipating/static conductive synthetic rubber Lengths: 100 ft. lengths, coiled and polywrapped
Reinforcement: Spiral-plied synthetic fabric Fittings: Quick acting
Cover: Black synthetic rubber with white spiral stripe (wrapped
impression)
Fittings: Reattachable quick disconnect coupler and adapter,
combination nipple, one-time fittings
Petroleum Dock Hose
541-532 (Red Stripe)
541-534 (Orange Stripe)
Built with a corrugated cover to provide flexibility (and reinforcement to provide greater strength and longer
life) in petroleum transfer service compared to standard 200 PSI constructions.
Built to withstand the day-in, day-out abuse, cutting, gouging, and scuffing caused by dragging on rough
dock surfaces and rubbing between barge and dock. Capable of handling temperatures of –25° to 200°F
(–31° to 93°C).
Surge Protection. 225 PSI provides full
SPECIFICATIONS
protection from testing and surges typical
Bend Weight
in dock petroleum transfer service. I.D. O.D. (in.) Max. WP
Plies Radius 541-532 541-534
Construction: (in.)
541-532 541-534 psi Mpa (in.) lb./ft. kg/m lb./ft. kg/m
Tube compounds:
Red Stripe: Nitrile synthetic rubber for up to 50% aromatics 3 3.89 3.84 6 225 1.55 11.0 3.28 4.89 2.89 6.48
Orange Stripe: Flosyn tube (synthetic rubber) for up to 100% 4 5.29 5.17 6 225 1.55 15.0 6.30 9.39 5.60 9.27
aromatics
Reinforcement: Spiral-plied heavy duty synthetic fabric with double 6 7.34 7.38 6 225 1.55 22.0 9.50 14.15 9.66 14.48
wire helix 8 9.43 9.47 6 225 1.55 30.0 13.81 20.58 14.02 21.00
Cover: Black Wingprene synthetic cover, corrugated-wrapped finish
10 11.63 11.72 8 225 1.55 40.0 20.49 30.53 21.42 32.05
Lengths: Up to 100 ft. lengths
Fittings: Built-in nipples with welded slip-on or threaded flanges 12 13.72 13.84 8 225 1.55 60.0 25.13 37.44 23.66 42.12
(150# + 300#) or flanged swaged fittings up to 10" ID

Factory coupled hose tested to U. S. Coast Guard requirements specified in the CFR, Title 33, Chapter 1, Subpart C (Latest Edtion)

IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
IN HOUSTON:
Ph: 718-273-7300 • Fax: 718-273-6232
Toll Free: 800-695-6769
APOLLO INTERNATIONAL 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
456 5/2/06 9:16 PM Page 1

460-06

Petroleum Transfer Hose

SPECIFICATIONS
SPECIFICATIONS
I.D. x O.D. Max. WP Bd. Rd. Wt.
I.D. x O.D. Max. WP Bd. Rd. Wt.
in. mm psi Mpa in. lb./ft.
in. mm psi Mpa in. lb./ft.
1-1/2 x 2.08 38.1 x 52.8 250 1.72 4 1.15
1-1/2 x 1.98 38.1 x 50.3 150 1.03 4 .82
2 x 2.59 50.8 x 65.8 250 1.72 5 1.44
2 x 2.50 50.8 x 63.5 150 1.03 5 1.07
2-1/2 x 3.11 63.5 x 79.0 250 1.72 6 1.84
2-1/2 x 3.09 63.5 x 78.5 150 1.03 6 1.64
3 x 3.74 76.2 x 95.0 250 1.72 7 2.58
3 x 3.58 76.2 x 90.9 150 1.03 7 1.92
4 x 4.77 101.6 x 121.2 250 1.72 10 3.60
4 x 4.70 101.6 x 119.4 150 1.03 10 2.88
543-117
543-650 A premium high pressure petroleum high transfer hose for
Intended for use in low temperature operations for transferring handling gasoline, oils, and other petroleum products at higher
gasoline, oil, and other petroleum products. It remains flexible at working pressures. Temperatures from –35°F to 200°F
temperatures from –65°F (–53°C) to 180°F (82°C) in both suction (–37° to 93°C).
and discharge service. Construction:
Construction: Tube: Special fuel resistant black Nitrile synthetic rubber (oil
Tube: Ultra-low temperature oil resistant synthetic rubber resistant).
Reinforcement: Spiral-plied synthetic fabric with wire helix Reinforcement: Spiral-plied synthetic fabric with wire helix
Cover: Blue Ultra-low temperature synthetic rubber with red Cover: Black Neoprene synthetic rubber (oil resistant). Wrapped
spiral stripe. Smooth cover, wrapped finish. finish.
Lengths: 100 ft. lengths, coiled and polywrapped. Lengths: 100 ft. lengths, coiled and polywrapped.
Fittings: Quick acting, reattachable Fittings: Quick acting, reattachable

SPECIFICATIONS
I.D. x O.D. Max. WP Weight SPECIFICATIONS
in. mm psi Mpa lb./ft. kg./m.
I.D. x O.D. Max. WP Weight
3/4 x 1.21 19.0 x 30.7 150 1.03 .42 .63
1 x 1.46 25.4 x 37.1 150 1.03 .52 .77 in. mm psi Mpa lb./ft. kg./m.
1-1/4 x 1.72 31.8 x 43.7 150 1.03 .63 .94 1-1/2 x 2.29 38.1 x 5.82 150 1.03 1.29 1.92
1-1/2 x 1.95 38.1 x 49.5 150 1.03 .73 1.09 2 x 2.73 50.8 x 69.3 150 1.03 1.65 2.46
2 x 2.49 50.8 x 63.2 150 1.03 .98 1.46 2-1/2 x 3.23 63.5 x 82.0 150 1.03 2.04 3.04
2-1/2 x 2.98 63.5 x 75.7 150 1.03 1.19 1.77
3 x 3.72 76.2 x 94.5 150 1.03 2.46 3.67
3 x 3.50 76.2 x 88.9 150 1.03 1.45 2.16
4 x 4.81 101.6 x 122.2 150 1.03 3.46 5.16
3-1/2 x 4.04 83.9 x 102.6 150 1.03 1.70 2.53
4 x 4.52 101.6 x 114.8 150 1.03 1.91 2.85
6 x 6.63 152.4 x 168.4 150 1.03 3.41 5.08
543-118
543-331 Recommended for the transfer of high temperature petroleum based
Designed for the discharge of gasoline, oil, and other petroleum materials such as tar, asphalt, and hot oils. It is suitable for suction
based products in tank and industrial applications. Capable of and discharge service on tank trucks, tank cars, or at bulk stations.
handling temperatures of –35°F to 180°F (–37° to 82°C). Special Reinforcement Extends Life. A special heat resistant
Construction: tube and Flexten reinforcement withstand temperatures from
Tube: Nitrile synthetic rubber (oil resistant)—plus antistatic wires –25 to 350°F (–31°C to 176°C) in continuous service.
Reinforcement: Spiral-plied synthetic fabric (2"-4" = 2 Ply; Construction:
6" = 4 Ply) and grounding wires Tube: Black Nitrile (special heat resistant) synthetic rubber (oil
Cover: Chemivic synthetic rubber (oil resistant) resistant)
Lengths: 100 ft. lengths, coiled and polywrapped. Reinforcement: Spiral-plied Flexten with wire helix
Fittings: Quick acting, reattachable, or one-time Cover: Black Neoprene synthetic rubber (oil resistant) with spiral
red stripe
Lengths: 100 ft. lengths, coiled and polywrapped.
Fittings: Quick acting, reattachable, or one-time
IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
457 5/2/06 9:17 PM Page 1

461-06

Air & Multipurpose Hose


SPECIFICATIONS SPECIFICATIONS
I.D. x O.D. Max. WP Weight I.D. x O.D. Max. WP Weight
in. mm psi Mpa lb./ft. kg./m. in. mm psi Mpa lb./ft. kg./m.
1/4 x .54 6.3 x 13.7 300 2.07 0.09 0.13 3/16 x .47 4.8 x 11.9 500 3.45 .08 .12
5/16 x .62 7.9 x 15.7 300 2.07 0.11 0.16 1/4 x .61 6.3 x 15.5 500 3.45 .17 .25
3/8 x .69 9.5 x 17.5 300 2.07 0.14 0.21 5/16 x .69 7.9 x 17.5 500 3.45 .20 .30
3/8 x .73 9.5 x 18.5 500 3.45 .22 .33
1/2 x .81 12.7 x 20.6 300 2.07 0.16 0.24
1/2 x .89 12.7 x 22.6 500 3.45 .28 .42
5/8 x .93 15.9 x 23.6 300 2.07 0.20 0.30
5/8 x 1.06 15.9 x 26.9 500 3.45 .35 .52
3/4 x 1.07 19.0 x 27.2 300 2.07 0.25 0.37
3/4 x 1.19 19.2 x 30.2 500 3.45 .41 .61
1 x 1.34 25.4 x 34.0 300 2.07 0.34 0.51 1 x 1.50 25.4 x 38.1 500 3.45 .58 .86
1-1/4 x 1.77 31.8 x 45.0 500 3.45 .79 1.18
535-278 (Black) 535-279 (Green) 1-1/2 x 2.04 38.1 x 51.8 500 3.45 .91 1.36
535-280 (Red) 535-281 (Blue) 2 x 2.62 50.8 x 66.5 500 3.45 1.19 1.77
535-294 (Gray) 569-035
Designed for use with push-on fittings at working pressures of A premium quality, multipurpose industrial hose with a wide range
300 psi. For low pressure hydraulic and pneumatic systems of applications in factories, construction, agriculture, quarries,
such as shop air systems, general industrial, maintenance and mines, railroads, the oil and gas industry, and shipbuilding. All
automotive applications. Non-conductive, minimum electrical sizes are rated at 500 psi (3.4 Mpa) maximum working pressure
resistance greater than one (1) megohm per inch of hose length at with a 4:1 safety factor. Non-conductive, minimum electrical
1000 volts DC. resistance greater than one (1) megohm per inch of hose length at
1000 volts DC. Temperatures from –20° to 190°F (–28° to 87°C).
Construction:
Construction:
Tube: Chemivic, oil and heat resistant synthetic rubber, RMA
Tube: Nitrile synthetic rubber, RMA Class A (high oil resistance)
Class A (high oil resistance)
Reinforcement: Spiral Flexten yarn, 2" is braided synthetic yarn
Reinforcement: One braid of high strength synthetic yarn laid Cover: Yellow Nitrile synthetic rubber XNBR (High Oil Resistant –
at the most effective angle for maximum strength and coupling RMA designation: Class A) (Smooth Finish) MSHA approved
holding ability
Cover: Oil, weather and abrasion resistant synthetic rubber, RMA Lengths: 3/16" to 3/4" – 500' per reel; 1" – 450' per reel;
Class B (medium/high oil resistance) 1-1/4" – 250' to 450' per reel; 1-1/2" – 150' to 350' per reel;
2" – 200' in box. Max. 3 pieces per reel or box, 50' increments.
Temperature Range: –40°F to 190°F (–40°C to 87°C). Coupled assemblies available, 1/4", 3/8", 1/2", and 3/4".
Fittings: Universal quick couplings, long shank, insert type or
interlocking clamp type

Chemical Transfer Hose


SPECIFICATIONS SPECIFICATIONS
I.D. x O.D. Max. WP Bd. Rd. Wt. I.D. x O.D. Max. WP Bd. Rd. Wt.
in. mm psi Mpa in. lb./ft. in. mm psi Mpa in. lb./ft.
1/2 x .95 12.7 x 24.1 200 1.38 3.0 .33 1/2 x .97 12.7 x 24.6 150 1.03 6.0 .31
3/4 x 1.22 19.0 x 31.0 200 1.38 3.5 .46 3/4 x 1.23 19.0 x 31.2 150 1.03 7.0 .44
1 x 1.47 25.4 x 37.3 200 1.38 4.0 .60 1 x 1.47 25.4 x 37.3 150 1.03 8.0 .54
1-1/4 x 1.73 31.8 x 43.9 200 1.38 4.0 .73 1-1/4 x 1.73 31.8 x 43.9 150 1.03 9.0 .66
1-1/2 x 1.97 38.1 x 50.0 200 1.38 5.0 .84 1-1/2 x 2.03 38.1 x 51.6 150 1.03 10.0 .92
2 x 2.55 50.8 x 64.8 200 1.38 6.0 1.22 2 x 2.61 50.8 x 66.3 150 1.03 12.0 1.32
2-1/2 x 3.14 63.5 x 79.8 200 1.38 8.0 1.78 2-1/2 x 3.11 63.5 x 79.0 150 1.03 15.0 1.65
3 x 3.63 76.2.x 92.2 200 1.38 9.0 2.11 3 x 3.61 76.2 x 91.7 150 1.03 18.0 2.02
4 x 4.67 101.6 x 118.6 200 1.38 10.0 2.81 4 x 4.69 101.6 x 119.1 150 1.03 24.0 2.95
546-065
It handles a majority of common industrial chemicals in pressure, 546-666
gravity flow and suction service. The temperature range is Handles a majority of today’s chemicals in pressure,
–40° to 150° F (–40° to 65°C). gravity flow, or suction service.
Construction: Construction:
Tube: PliosynTM (ultra high molecular weight polyethylene) Tube: Clear SpeclarTM cross linked polyethylene (XLPE)
Reinforcement: Spiral-plied synthetic fabric with double wire helix Reinforcement: Spiral-plied synthetic fabric with double wire helix
Cover: Green synthetic rubber with bright orange longitudinal Cover: Green EPDM synthetic rubber with spiral stripe (wrapped
stripe, corrugated (wrapped impression) impression)
Lengths: 100' exact length, coiled and polywrapped Lengths: 100 ft. exact lengths, coiled and polywrapped
Fittings: Quick acting, reattachable, or one-time Fittings: Quick acting, reattachable, or one-time

Master Distributors for


Allied Packing and Rubber, Inc.
1335 West Eleventh Street, Long Beach, CA 90813
Phone: (562) 435-2411 • Fax: (562) 436-2140

goodyear
458 5/2/06 9:18 PM Page 474

462-06

Cleaning Equipment Hose

SPECIFICATIONS SPECIFICATIONS
Nominal Max. Operating Nominal Max. Operating
I.D. Weight I.D. Weight
O.D. Pressure O.D. Pressure
in. in. mm psi Mpa lb./ft. in. in. mm psi Mpa lb./ft.
1/4 .53 13.5 3000 20.68 .16
3/8 .693 17.5 3000 20.68 .24
3/8 .69 17.5 3000 20.68 .24
1/2 .820 20.8 3000 20.68 .32
1/2 .82 20.8 3000 20.68 .32

539-099 (Black) 539-100 (Yellow) 539-085 (Black) 539-089 (Blue) 539-090 (Gray)
Specially designed for use on pressure washer machines with Specially designed for use on pressure washer machines with
working pressures up to 3000 PSI and temperatures up to 250°F working pressures up to 3000 PSI and temperatures up to 250°F
Construction: Construction:
Tube: Black Nitrile. Tube: Black Nitrile synthetic rubber
Reinforcement: Braided (1) steel wire Reinforcement: Braided (1) steel wire
Cover: Black or yellow oil resistant Carbryn RMA Class A Cover: Black, blue or gray oil-resistant synthetic rubber RMA
Temperature: –20° to 250°F (–28° to 121°C) Class B (medium/high oil resistance)
Packaging: 500 foot reels, maximum 3 pieces, 50 ft. increments, Temperature: –20° to 250°F (–28° to 121°C)
coupled lengths available Packaging: 500 foot reels, maximum 3 pieces, 50 ft. increments,
Fittings: Hydraulic 100R1. Over the Wire (skive hose) type coupled lengths available
crimped to fitting manufacturer’s specifications. Fittings: Hydraulic 100R1. Over the Wire (skive hose) type
crimped to fitting manufacturer’s specifications.

539-095 (Black) 539-110 (Red)


Designed for use on either steam cleaner machines or combination steam cleaner/
pressure washer machines. Not recommended for cold water service.
Handles Steam Safely. Handles steam
up to 325°F/163°C at 350 PSI with a safety factor in excess of 10 to 1.
Handles High Pressure Hot Water: Handles hot water up to 250° to 325°F
(121° to 162°C) at 3000 PSI (2500 PSI on 1/2") with a 4 to 1 safety factor.

Construction:
SPECIFICATIONS
Tube: Black Prosyn synthetic rubber.
Reinforcement: Braided (1) steel wire Nominal Max. Operating
I.D. Weight
O.D. Pressure
Cover: Black and Red synthetic rubber RMA Class B (medium/high
oil resistance) in. in. mm psi Mpa lb./ft.
Packaging: 500 foot reel, maximum 3 pieces, 50 ft. increments, 3/8 .693 17.5 3000 20.6 .23
coupled lengths available.
1/2 .820 20.8 2500 16.9 .32
Fittings: Recommended testing with Hydraulic 100R1
Over the Wire (skive hose) fittings crimped to the fitting
manufacturer’s specifications. Compatibility with different
Over the Wire fittings should be tested prior to use.

IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
459 5/2/06 9:19 PM Page 1

463-06

STAINLESS STEEL HOSE


Single & Double Braid – Corrugated
Working Test Burst Min. Live Length
Inside Outside Pressure Pressure Pressure Constant Static for Normal Weight
Diameter Part Number Diameter PSI@70°F PSI@70°F PSI@70°F Flexing Bend Vibration Lb./Ft.
MSS 361 1/4” MSS361-014 .58” 2750 4125 11000 5” 1” 3-1/2” .22
Single Braid 3/8” MSS361-038 .70” 1960 2490 7840 5-1/2” 1-1/8” 4-1/4” .31
1/2” MSS361-012 .90” 1335 2003 5340 7-1/2” 1-1/2” 4-1/2” .37
3/4” MSS361-034 1.18” 1135 1703 4540 8-1/2” 2-1/8” 5-3/4” .62
1” MSS361-100 1.50” 795 1193 3180 10” 2-3/4” 7” .81
1-1/4” MSS361-125 1.81” 610 915 2440 11-1/2” 3-1/2” 7-1/4” 1.00
1-1/2” MSS361-150 2.10” 535 800 2120 13” 4-1/2” 8” 1.41
2” MSS361-200 2.74” 535 803 2140 15” 6” 9-1/2” 2.03
2-1/2” MSS361-250 3.26” 395 593 1580 17” 6-1/2” 10-1/2” 2.42
3” MSS361-300 3.83” 385 578 1540 21” 8-1/2” 11” 3.09
3-1/2” MSS361-350 4.38” 315 472 1260 23” 10” 11-1/2” 3.53
CONSTRUCTION: 4” MSS361-400 4.88” 270 405 1080 27” 11” 12” 3.97
316L Stainless Steel 6” MSS361-600 7.13” 170 255 680 37” 16” 14” 6.37
Butt Welded Tube, 8” MSS361-800 9.25” 235 353 940 42” 19” 16” 9.60
Annular Close Pitch 10” MSS361-1000 11.25” 260 390 1040 56’ 24” 18” 14.01
Corrugations, Type 12” MSS361-1200 13.37” 160 240 640 58” 28” 20” 16.30
304 Stainless Steel 14” MSS361-1400 14.62” 150 225 600 66” 35” 22” 17.03
Braid 16” MSS361-1600 16.62” 110 165 440 74” 40” 25” 18.44
MSS 362 1/4” MSS362-014 .66” 3935 5903 15740 5” 1” 3-1/2” .30
Double Braid 3/8” MSS362-038 .78” 2740 4110 10960 5-1/2” 1-1/8” 4-1/4” .41
1/2” MSS362-012 .98” 2350 3525 9400 7-1/2” 1-1/2” 4-1/2” .50
3/4” MSS362-034 1.26” 1800 2700 7200 8-1/2” 2-1/8” 5-3/4” .84
1” MSS362-100 1.58” 1365 2050 5460 10” 2-3/4” 7” 1.06
1-1/4” MSS362-125 1.89” 1000 1500 4000 11-1/2” 3-1/2” 7-1/4” 1.30
1-1/2” MSS362-150 2.18” 955 1430 3820 13” 4-1/2” 8” 1.81
2” MSS362-200 2.85” 865 1298 3460 15” 6” 9-1/2” 2.73
2-1/2” MSS362-250 3.37” 710 1065 2840 17” 6-1/2” 10-1/2” 3.19
3” MSS362-300 3.96” 635 953 2540 21” 8-1/2” 11” 4.23
3-1/2” MSS362-350 4.51” 585 878 2340 23” 10” 11-1/2” 4.79
CONSTRUCTION: 4” MSS362-400 5.01” 485 728 1940 27” 11” 12” 5.34
316L Stainless Steel 6” MSS362-600 7.26” 300 450 1200 37” 16” 14” 8.11
Butt Welded Tube, 8” MSS362-800 9.50” 360 540 1440 42” 19” 16” 13.01
Annular Close Pitch 10” MSS362-1000 11.50” 280 420 1120 56” 24” 18” 19.81
Corrugations, Type 12” MSS362-1200 13.54” 220 330 880 58” 28” 20” 22.81
304 Stainless Steel 14” MSS362-1400 14.86” 190 285 760 66” 35” 22” 23.43
Braid 16” MSS362-1600 16.86” 170 255 680 74” 40” 25” 24.65

The corrugated hose is made from strip metal or various alloys. The strip metal is formed into tubes and the edges are inert-arc butt welded. The tube is then
corrugated. Corrugated hose is pressure tight and suited to continuous flexing or vibration. Close pitch is standard.
The flexibility of corrugated metal hose is due to the spring-like quality of the corrugations. It will return to its original position when bending forces are removed.
However, if the hose is bent beyond its minimum recommended bend radius, the hose will take on a permanent set.
The hose is designed to correct problems involving vibration, temperature variations, misalignment, pipe line expansion and contraction, and offset motion.
LENGTHS: Specify when ordering. FITTINGS: Specify when ordering.
COMPLIANCE: All assemblies 4” I.D. and larger are tested and marked in compliance with U.S. Coast Guard regulations.
CONVEYANTS HANDLED: Water for cooling or heating, steam, hydrocarbons, gases and a wide variety of chemicals.
HOW TO ORDER OR REQUEST QUOTATION:

1. Specify Quantity 5. Working Pressure 9. Fittings - complete description should include type and metal alloy.
2. I.D. Size 6. Temperature 10. Special requirements
3. Overall Length 7. Application
4. Hose Type (Part No.) 8. Media (conveyants)

When products are required to conform to a particular regulation, speculation or application this should be stated on the inquiry/order.

“Se Habla Español” Phone: 713-641-2288


Fax: 713-641-3636
4380 South Wayside Toll Free: 800-532-2672
Suite 100 E-mail: sales@accordintl.com
Houston, TX 77087 INTERNATIONAL, INC. www.accordintl.com
0464-04 5/2/06 9:20 PM Page 1

464-06

UNAFLEX INC.
CHEMICAL TRANSFER HOSE – Stainless Steel – Corrugated
Types BW21-1, LW21-1, BWL21-1, BW21-1H and BWA21-1
GUIDE FOR ORDERING
1. Describe service conditions, type of service, movement, product conveyed,
temperature, operating pressure, test pressure.
2. Specify inside diameter of hose or line.
3. Specify overall length (end fitting to end fitting) and quantity.
4. Specify type of hose and alloy of end fittings.
5. Specify type and quantity of end fittings desired. Note: Fittings are available welded
or silver brazed – please specify.

RATED BURST PRESSURE (psi)


NOM. CATALOG MAXIMUM MINIMUM C/L BEND (3), (4), (5) APPROX. WT.
I.D. DESIGNATION O.D. RADIUS FOR CONSTANT PER FOOT
(in.) (1) (in.) FLEXURE (in.) (2) Welded Silver Brazed (lbs.)
Fittings Fittings
BW21-1 .500 4 4500 5175 .14
1/4
BW21-1H .535 4 9000 10000 .19
BW21-1 .695 6 3500 4025 .25
3/8
BW21-1H .755 6 8500 10000 .36
BW21-1 .850 8 3500 4025 .35
1/2
BW21-1H .900 8 8000 9000 .47
LW21-1 1.140 7-1/2 2400 2800 .39
3/4 BWL21-1 1.140 7-1/2 2400 2800 .44
BW21-1H 1.235 8 5200 6000 .84
LW21-1 1.470 8-1/2 2000 2300 .65
1 BWL21-1 1.470 8-1/2 2000 2300 .72
BW21-1H 1.575 9 4500 5200 1.12
LW21-1 1.820 9 1600 1900 .74
1-1/4 BWL21-1 1.820 9 1600 1900 1.02
BW21-1H 1.885 9 3500 4000 1.51
LW21-1 2.120 10 1500 1725 1.07
1-1/2 BWL21-1 2.120 10 1500 1725 1.29
BW21-1H 2.260 10 3500 4000 2.01
LW21-1 2.805 11 1400 1600 1.48
2 BWL21-1 2.805 11 1400 1600 1.88
BW21-1H 2.885 11-1/2 2100 2400 2.83
LW21-1 3.370 13 1000 1150 1.88
2-1/2 BWL21-1 3.370 13 1000 1150 2.16
BW21-1H 3.510 13 1500 1725 3.62
LW21-1 4.050 15 1000 1150 2.51
3 BWL21-1 4.050 15 1000 1150 3.00
BW21-1H 4.135 18 1400 1600 4.44
LW21-1 4.605 19 850 1000 3.13
3-1/2
BWL21-1 4.590 19 850 1000 3.57
LW21-1 5.330 23 800 900 3.85
4 BWL21-1 5.351 23 800 900 4.47
5 BWA21-1 6.115 50 1100 1250 5.53
6 BWA21-1 7.170 54 800 900 6.33
8 BWA21-1 9.385 60 800 900 10.27
10 BWA21-1 11.555 63 600 675 10.98
12 BWA21-1 13.830 65 600 675 13.61
14 BWA21-1 15.135 66 500 575 16.30

Unaflex products available from


3901 NE 12th Avenue
Pompano Beach, FL 33064
Phone: (954) 785-6760
H. S. WHITE CO., INC. Call Toll Free for a
Copy of Our Catalog!
TOLL FREE: (800) 327-8575 www.marinesupplies.net
Miami: (305) 940-2700 FAX: (954) 785-8247
0477-03 5/2/06 9:21 PM Page 1

465-06

UNAFLEX INC.

WATER HOSE EXHAUST HOSE

Premium Water Hose / Premium Water Hose /


Certified We t Exhaust Hardwall Certified We t Exhaust Softwall
SAE J2006R2 SAE J2006R1
Series 110 Black w/ green stripe
Series 100 Black w/ green stripe Series 200 Black w/ blue stripe
Series 250 Black w/ blue stripe
A premium water and certified wet exhaust hose, heavy wall
A premium water and certified wet exhaust hose, heavy wall with
reinforcement with 2, 4, or 6 plies of synthetic cord. Designed
helical wire reinforcement between (4) plies of rayon fabric.
for engine water circulation, heat, heat exchanger, heavy duty
Compounded to resist engine heat, exhaust fumes, ozone, mild
discharge lines and straight marine wet exhaust connections.
acids, toilet effluent, salt water, and abrasion. Meets or exceeds
Meets or exceeds USCG, ABYC, and SAE J2006 R1
USCG, ABYC, and SAE J2006 R2 standards for wet exhaust
standards for wet exhaust service. Recommended for short
service.
straight connections.
Series Size Series Size Series Size Series Size
100 - 0120 1/2” x 50’ lgth 100/250-1120 1/2” x 50’ lgth 110 - 0120 1/2” x 50’ lgth 1-1/2”x 50’ lgth
110/200 -1120
100 - 0340 3/4” x 50’ lgth 100/250-1340 1-3/4”x 50’lgth 110 - 0340 3/4” x 50’ lgth 110/200-1340 1-3/4”x 50’lgth
100 - 0580 5/8” x 50’ lgth 100 /250-1580 1- 5/8” x 50’ lgth 110 - 0580 5/8” x 50’ lgth 110/200-1580 1-5/8”x 50’ lgth
100 - 0780 7/8” x 50’ lgth 100/250-1780 1-7/8” x 50’ lgth 110 - 0780 7/8” x 50’ lgth 110/200-1780 1-7/8” x 50’ lgth
100 - 1000 1” x 50’ lgth 100 / 250-2000 2” x 50’ lgth 110 - 1000 1” x 50’ lgth 110/200-2000 2” x 50’ lgth
100 - 1140 1-1/4” x 50’ lgth 100/250-2140 2-1/4” x 50’ lgth 110 - 1140 1-1/4” x 50’ lgth 110/200-2140 2-1/4” x 50’ lgth
100 - 1180 1-1/8” x 50’ lgth 100/250-2180 2-1/8” x 50’ lgth 110 - 1180 1-1/8” x 50’ lgth 110/200-2180 2-1/8” x 50’ lgth
100 - 1380 1-3/8” x 50’ lgth 100/ 250-2380 2-3/8” x 50’ lgth 110 - 1380 1-3/8” x 50’ lgth 110/200-2380 2-3/8” x 50’ lgth
100 - 1560 1-5/16” x 50’lgth 110 - 1560 1-5/16” x 50’lgth
250 -2120 2-1/2” x 50’ lgth 250-3184 13-1/8” x12.5’ lgth 200 -2120 2-1/2” x 50’ lgth 200 - 4124 4-1/2” x 12.5’ lgth
250 -2340 2-3 /4” x 50’ lgth 250 - 4004 4” x 12.5’ lgth 200 -2580 2-5/8” x 50’ lgth 200 - 4184 4-1/ 8” x 12.5’ lgth
250 -2580 2-5/8” x 50’ lgth 250 - 4124 4-1/2” x 12.5’ lgth 200 -2780 2-7/8” x 50’ lgth 200 - 5004 5” x 12.5’ lgth
250 -2780 2-7/8” x 50’ lgth 250 - 4184 4-1/8” x 12.5’ lgth 200 -3000 3” x 50’ lgth 200 - 6004 6” x 12.5’ lgth
250 -3000 3” x 50’ lgth 250 - 5004 5” x 12.5’ lgth 200 -3120 3-1/2” x 50’ lgth 200 - 6584 6-5/8” x 12.5’ lgth
250 -3120 3 -1/2” x 50’ lgth 250 -6004 6” x 12.5’ lgth 200 -3180 3-1/8” x 50 200 - 8004 8” x 12.5’ lgth
200 -3344 3-3/4” x12.5’ lgth 200 -10004 10” x 12.5’ lgth
200 - 4004 4” x 12.5’ lgth 200 -12004 12” x 12.5’ lgth
Washdown Hose
Corrugated Wet Exhaust Hose available for severe bend applications.
Se ries 166 White
FDA formulated premium drinking water and superior dock side Bilge Pump hose
wash down hose. Braided reinforcement and coupled with brass Series 120 Black or White
full flow couplings.
A corrugated polyethylene hose resistant to oily bilge and sea
Series Size Series Size water. Designed for live well aerators, bilge discharge, sink,
166 - 0585 5/8” x 25’ lgth 166 - 0588 5/8 x 75’ lgth and shower drains. Durable, flexible, and abrasion resistant.
166 - 0586 5/8” x 50’ lgth 166 - 0587 5/8” x 100’lgth Series Size Series Size
120-0346W 3/4” x 50’ lgth 120 -1146W 1-1/4” x 50’ lgth
120-0586W 5/8” x 50’ lgth 120 -1186W 1-1/8” x 50’ lgth
120-1125W 1-1/2” x 25’ lgth

Unaflex products available from


3901 NE 12th Avenue
Pompano Beach, FL 33064
Phone: (954) 785-6760
H. S. WHITE CO., INC. Call Toll Free for a
Copy of Our Catalog!
TOLL FREE: (800) 327-8575 www.marinesupplies.net
Miami: (305) 940-2700 FAX: (954) 785-8247
0478-03 5/2/06 9:21 PM Page 1

466-06

UNAFLEX INC.

ELECTRICAL WATER HOSE

Electrical Conduit Clear PVC Tubing

Series 125 Black Series 150 Clear

A split wire conduit designed to provide chafing protection A clear FDA formulated PVC tubing for low pressure cold water
and quality appearance for multi-wire harness or cable routing. applications in sink, shower, refrigerator, and live well drain lines.
Also available in High Temperature Nylon.
Series Size Series Size
Series Size Series Size 150 - 0120 1/2” x 250’ lgth 150 -0580 5/8”x 250’ lgth
125-0126 1/2” x 50’ lgth 125 -1006 1” x 50’ lgth
150 - 0140 1/4” x 250’ lgth 150-1000 1” x 100’lgth
125-0146 1/4” x 50’ lgth 125 -1126 1-1/2” x 50’ lgth
150 - 0340 3/4” x 200’ lgth 150-1120 1-1/2” x 50’ lgth
125-0346 3/4” x 50’ lgth 125 -1146 1-1/4” x 50 lgth
125-0386 3/8” x 50’ lgth 150 - 0360 3/16” x 250’ lgth 150-1140 1-1/4” x 100’ lgth
125 -2000 2” x 50 lgth
125-0586 5/8” x 50’ lgth 150 - 1380 3/8” x 250’ lgth 150-1180 1-1/8” x 100’ lgth
150 - 0560 5-1/6” x 250’ lgth
SANITATION W A TER HOSE

Red, Clear & Blue PVC


“Flex” Sanitation Hose Reinforcement Tubing
Smooth H / D
Series 148 FDA Formulated, Series 162 Red Tr.
White Series 163 Clear
Series 164 Blue Tr.
A smooth wall extra heavy duty multi-purpose PVC hose
especially formulated and compounded from FDA materials A heavy walled, nylon reinforced PVC tubing compounded with
exhibiting low odor permeation. Excellent for all sanitation FDA formulated materials for applications requiring non-toxic,
systems, below water drains, potable water, water intake tasteless, odorless tubing. Hot or cold pressurized systems. Vent
systems, and aerators. Smooth cover permits clamping without and drain lines, bilge pump discharge. 162 Red tracer for hot
cuffs. Recommended double clamps and sealing compounds and cold tap water. 163 Extra heavy wall. 164 Blue tracer for
for below waterline connections. cold tap water.

Series Size Series Size Series Size Series Size


148-0346 3/4” x 50’ lgth 148-1120 1-1/2” x 50’ lgth 162 - 0120 1/2” x 250’ lgth 1/2” x 250’ lgth
163-0120
148-0586 5/8” x 50’ lgth 148-1146 1-1/4”x 50’lgth 162 - 0340 3/4” x 150’ lgth 163-0340 3/4” x 50’lgth
148 - 1006 1” x 50’ lgth 148-1186 1- 1/8” x 50’ lgth 162 - 0380 3/8” x 250’ lgth 163-0380 3/8”x 250’ lgth
162 - 0580 5/8” x 250’ lgth 163-0580 5/8” x 250’ lgth
Premium Sanitation Hose 162 - 1000 1” x 100’ lgth 163-1000 1” x 100’ lgth
162 - 1120 1-1/2” x 50’ lgth 164-0120 1/2” x 250’ lgth
Series 101 Black w/ green stripe
162 - 1140 1-1/4” x 50’ lgth 164-0340 3/4” x 150’ lgth
The premium sanitation hose designed for most critical toilet
and holding tank connections with maximum resistance to toilet 162 - 1180 1-3/8” x 100’ lgth 164-0380 3/8” x 250’ lgth
effluent and odor. Constructed with wire helix embedded
162 - 2000 2” x 50’ lgth 164-0580 5/8” X 50’ lgth
between 2 plies synthetic fabric for maximum flexibility.

Series Size Series Size


101 - 1000 1” x 50’ lgth 101-1120 1-1/2” x 50’ lgth

Unaflex products available from


3901 NE 12th Avenue
Pompano Beach, FL 33064
Phone: (954) 785-6760
H. S. WHITE CO., INC. Call Toll Free for a
Copy of Our Catalog!
TOLL FREE: (800) 327-8575 www.marinesupplies.net
Miami: (305) 940-2700 FAX: (954) 785-8247
0479-03 5/2/06 9:22 PM Page 479

467-06

UNAFLEX INC.

FUEL HOSE VENT & DUCTING


“Flex-Acol” Alcohol Resistant
Blower Vent
Type B Fuel
Series 400 Black or White
Series 315 Black with red lettering
Excellent resistance to heat, ozone, and permeation by alcohol PVC blower vent hose supported by copper plated wire helix
blended gasoline and diesel fuels. Compounded to meet or and resistant to ozone, sunlight and weathering. Does not
exceed SAE J1527 Type B, USCG - Type B, USCG and NMMA support combustion.
standards for fuel feed and vent hoses. Multiple plies of
reinforcement provide superior flexibility and good bend radius. Series Size Series Size
400-3000W 3” x 50’ lgth 400-4000W 4” x 50’ lgth
Series Size Series Size
315 - 0140 1/4” x 250’ lgth 315 - 0560 5-1/6” x 250’ lgth
3/8” x 250’ lgth 315 - 0580 5/8” x 250’ lgth
Blower Vent - Heavy Duty
315 - 0380
Series 420 Black
“Flex-Acol” Alcohol Resistant
Heavy duty PVC blower vent hose with vinyl coated wire helix
Type A Fuel
per UL specifications. Resistant to ozone sunlight and
Series 350 - 360 Black with red weathering. Will not support combustion.
lettering or stripe.
Series Size Series Size
Excellent resistance to fire, heat, ozone, and permeation by
420-3000 3” x 50’ lgth 420-4000 4” x 50’ lgth
alcohol blended gasoline and diesel fuels. Compounded to meet
or exceed SAE-J1527 Type A, ISO/DIS 7840, USCG and
NMMA standards for fuel feed, fill and vent hoses. 1-1/2" I.D. Non- Insulated AC Ducting
thru 2-3/8" I.D. has wire helix for excellent flexibility.
Series 460 Gray
Series Size Series Size
Heavy duty PVC fabric reinforced A/C ducting with nylon and a
350 - 0120 1/2” x 150’ lgth 350 - 1120 1-1/2” x 50’ lgth
metallic helix to insure maximum air flow and minimum
350 - 0140 1/4” x 250’ lgth 350 - 1580 1-5/8” x 50’ lgth condensation. Resistant to ozone sunlight. Manufactured to
350 - 0340 3/4” x 150’ lgth 350 - 1780 1-7/8” x 50’ lgth meet or exceed UL Class 1 standards of flame resistance.

350 - 0380 3/8” x 250’ lgth 350 - 2000 2” x 50’ lgth Series Size Series Size
350 - 0560 460-3000 3” x 25’ lgth 460-6000 6” x 25’ lgth
5/16” x 250’ lgth 350 - 2120 2-1/2” x 50’ lgth
350 - 0580 5 / 8” x 1 50’lgth 2-3/8” x 50’ lgth 460-4000 4” x 25’ lgth 460-7000 7” x 25’ lgth
350 - 2380
350 - 1000 1” x 100’ lgth 460-5000 5” x 25’ lgth

Corrugated Type A Fuel Hose Insulated AC Ducting


Series 352 - 362 Black with red
lettering or stripe. Series 480
Excellent resistance to fire, heat, ozone, and permeation by Insulated A/C ducting manufactured to meet or exceed UL
alcohol blended gasoline and diesel fuels. Compounded to meet Class 1 standards of flame resistance.
or exceed SAE-J1527 Type A, ISO/DIS 7840, USCG and Series Size Series Size
NMMA standards for fuel feed, fill and vent hoses. 1-1/2" I.D. 480-3000 3” x 25’ lgth 480-6000 6” x 25’ lgth
thru 2-3/8" I.D. has wire helix for excellent flexibility. Available for
480-4000 4” x 25’ lgth 480-7000 7” x 25’ lgth
severe-bend application.
480-5000 5” x 25’ lgth
Series 352/362-1120 Size 1-1/2” x 50’ lgth

Unaflex products available from


3901 NE 12th Avenue
Pompano Beach, FL 33064
Phone: (954) 785-6760
H. S. WHITE CO., INC. Call Toll Free for a
Copy of Our Catalog!
TOLL FREE: (800) 327-8575 www.marinesupplies.net
Miami: (305) 940-2700 FAX: (954) 785-8247
464-05 5/2/06 9:23 PM Page 480

468-06

REELCRAFT INDUSTRIES, INC.


HOSE REELS FOR AIR, WATER OR OIL
SERIES 4000-0 (Open)*, 5000-0 (Open), 5000-E (Enclosed)
(Spring Driven)
Designed for general air or water applications.
DIMENSIONS
LOW PRESSURE HOSE REELS
Maximum temperature 150°F - Reel inlet is 3/8" F.P.T.
MODELS HOSE MODELS
WITH HOSE ASSEMBLY WITHOUT HOSE
MODEL WGT. P.S.I. I.D. O.D. LGTH. MODEL WGT. P.S.I.
4435 OLP 20# 300 1/4" .500 35' 4400 OLP 17# 500
5450 OLP 26# 300 1/4" .500 50' 5400 OLP 20# 500
5635 OLP 5450 ELP 5635 OLP 25# 300 3/8" .640 35' 5600 OLP 21# 500
Open Enclosed 5650 OLP 36# 300 3/8" .640 50' 5605 OLP 31# 500
MEDIUM PRESSURE OIL HOSE REELS
Red painted steel is standard; Stainless steel Maximum temperature 210°F - Reel Inlet 1/2" F.P.T.
is optional. (Please specify if desired.)
MODELS HOSE MODELS
*Series 4000 and 5605 are not available WITH HOSE ASSEMBLY WITHOUT HOSE
enclosed. MODEL WGT. P.S.I. I.D. O.D. LGTH. MODEL WGT. P.S.I.
7650 OMP 55# 2250 3/8" .690 50' 7600 OMP 45# 3000
Series 5000-E and 7000-E reels are same as 7850 OMP 57# 2000 1/2" .815 50' 7800 OMP 42# 3000
5000-O and 7000-O reels except E reels are
fully enclosed. To order, change the model HIGH PRESSURE GREASE HOSE REELS
number suffix letter O to E. Maximum temperature 210°F - Reel inlet is 1/2" F.P.T.
Example: 5450-OLP would become 5450-ELP. MODELS HOSE MODELS
Add 8 or 15 lbs. to open reel weight. WITH HOSE ASSEMBLY WITHOUT HOSE
MODEL WGT. P.S.I. I.D. O.D. LGTH. MODEL WGT. P.S.I.
7450 OHP 57# 5000 1/4" .590 50' 7400 OHP 43# 5000
7650 OHP 60# 4000 3/8" .750 50' 7600 OHP 46# 5000

HOSE REELS FOR OXYGEN-ACETYLENE


& FUEL GASES
7850 OLP SERIES TW-5000 (Open), TW-7000 (Open)
DIMENSIONS (Spring Driven)
4000 O 5000 O 5000 E 7000 O 7000 E
TW 5000 TW 7000
A 12-7/8” 14-1/2” 18-1/2” 20-1/4” 20-3/4”
B 12-5/8” 13-1/2” 15” 19” 20-3/4”
C 8” 9-3/4” 9-3/4” 7-7/8” 7-7/8”
D 2-1/2” 2-1/2” 2-1/2” 3-7/8” 3-7/8”
E 5-3/8” 6” 9-3/4” 7” 8”

Enclosed Model
7650 ELP
WELDING HOSE REELS
Reels less Hose, Model Series TW5000-OLP and
TW 5000 TW 7000
TW-7000-OLP are U/L Listed #70H2.
Hose supplied on reel meets R.M.A. and C.G.A. Type MODELS HOSE MODELS
V.D., Grade R specifications. Use of other types of hose WITH HOSE ASSEMBLIES WITHOUT HOSE
is not recommended. MODEL WGT. P.S.I. I.D. O.D. LGTH. MODEL WGT. P.S.I.
Reels automatically retrieve and store up to 60 feet of TW 5425 OLPT 26# 200 1/4" .530 25' TW 5400 OLPT 20# 200
1/4" I.D. Welding Hose. Mechanism maintains desired TW 7450 OLPT 53# 200 1/4" .530 50' TW 7400 OLPT 43# 200
hose length outside reel. Brackets are field adjustable. TW 7460 OLPT 55# 200 1/4" .530 60' TW 7400 OLPT 43# 200
Both reel inlets 1/4" F.P.T.

w w w. r e e l c r a f t . c o m U.S.A. Tel: 800-444-3134


UK Tel: 44-0-1536-40699
REELCRAFT INDUSTRIES, INC.
Int'l. Tel: 260-248-8188
P.O. BOX 248 U.S.A. Fax: 800-444-4587
COLUMBIA CITY, IN 46725 U.S.A. Int'l. Fax: 260-248-2605
E-Mail: reelcraft@reelcraft.com
Reelcraft 465 5/2/06 9:24 PM Page 481

469-06

REELCRAFT INDUSTRIES, INC.


SERIES 80000-O & D 80000 (OPEN) SPRING DRIVEN HOSE REELS FOR AIR, WATER OR OIL
LOW PRESSURE AIR/WATER HOSE REELS
The 80000 series reel weighs up
to 35% less than conventional 80000 series reels are designed for high volume air-water requirements.
Low pressure reels are furnished standard with PVC hose. Maximum
hose reels of the same size but is
temperature 150° F with hose/ 210° F without hose. Reel Inlet 1/2"
uniquely designed to provide more
or 3/4" NPTF (F).
strength in a more compact reel.
The reel features a structurally MODELS HOSE MODELS
WITH HOSE ASSEMBLY WITHOUT HOSE
reinforced dual pedestal base and
a dual guide arm assembly that is MODEL WGT. P.S.I. I.D. O.D. LGTH. MODEL WGT. P.S.I.

D80000 easily field adjustable. 83050 OLP 88# 250 3/4" 1.188" 50' 83000 OLP 74# 500
80000 D83075 OLP 112# 250 3/4" 1.188" 75' D83000 OLP 89# 500
Red painted steel is standard. Stainless steel reels are available. D84050 OLP 110# 250 1" 1.500" 50' D84000 OLP 77# 500

MEDIUM PRESSURE OIL HOSE REELS


80000 D80000 Medium pressure reels are furnished standard with S.A.E. R1T one wire
3/4” Hose 1” Hose braid hose. Maximum temperature 210° - Reel Inlet 1/2” or 3/4” NPTF (F).
A 24” 24” 24” MODELS HOSE MODELS
WITH HOSE ASSEMBLY WITHOUT HOSE
B 25-3/8” 25-3/8” 25-3/8”
C 8-5/16” 11-3/8” 11-3/8” MODEL WGT. P.S.I. I.D. O.D. LGTH. MODEL WGT. P.S.I.

D 10-1/2” 14-1/4” 15-1/4” 83050 OMP 96# 1250 3/4" 1.188" 50' 83000 OMP 77# 1500

E 10” 10-1/2” 10-1/2”


HOSE GUIDE ROLLER POSITIONS
F 6” 7-7/8” 7-7/8”
SW TW Guide arm position SW is Side Wind
position, TW is Top Wind position and
MODIFICATIONS BW is Bottom Wind position. All 80000
Reels without hose can be modified to handle gasoline and diesel fuel. series reels are shipped in the Side Wind
To modify order, place prefix “F” before model number (F 83000). position unless otherwise requested.
BW

CORROSION RESISTANT REELS (STAINLESS STEEL REELS)

Stainless steel hose reels will increase the life of expensive chemical fluid transfer and wash
down hoses. By properly storing hose when not in use you will also increase occupational
safety by eliminating the tripping hazard of unstored hose and improve sanitation.

Stainless steel hose reels are ideal for food processing, pre-rinse, wash down, chemical
transfer and industrial solvent handling. Also suitable for coastal, offshore and on-board ship
in marine applications where the harsh environment of salt spray requires the use of stainless
steel hose reels. Swivels include Viton® “O” rings.

Models Without Hose Hose Capacity • Full-flow stainless steel shaft and • Pos-i-latch will maintain the desired
Medium & swivel assures maximum product
Wgt. Pressure I.D. O.D. Lgth working length of hose. Mechanism
Low Pressure Model delivery. Exception: 80000 &
lbs. psi in. in. ft. assures a positive latch of the hose
D 80000
Reels not cataloged with 5600 OLS 23 500 3/8 .690 35 • Heavy duty brackets to eliminate • All reels are permanently factory
hose. Hoses are quoted 5600 OMS 24 3000 3/8 .690 30 bending due to angular hose pull lubricated
separately on request. 7800 OLS 44 500 1/2 .781 50 • 7000 Series offers weatherproof
7600 OMS 55 42 3000 3/8 .690 66 • Banded drive spring gives smooth gasketed spring motor, assures
Maximum temperature 7800 OMS 47 3000 1/2 .820 50 automatic hose retrieval
210°F (99°C) maximum service life
82000 OLS* 81 500 1/2 .781 100
• Multi-position guide arm permits wall, • Vibration-proof self-locking fasteners
Higher temperature 82000 OMS* 83 1500 1/2 .820 75
floor, ceiling, pit or truck mounting assures assembly integrity
available on request. 83000 OLS* 81 500 3/4 1.188 50
83000 OMS* 83 1250 3/4 1.188 50 • Nylon guide rollers reduce hose drag • 304L grade of steel
Hand crank models D83000 OLS* 76 500 3/4 1.188 75 and abrasion
available for 1/2” (13mm) D84000 OLS* 77 500 1 1.500 50 • Passivated for electro polish finish
& 3/4” (19mm) I.D. hose - D9300 OLS 116 500 3/4 1.188 75
specify if desired. D9400 OLS 117 500 1 1.500 50 *Series 80000 & D80000 stainless reels have an aluminum fluid path
and may not be suitable for all applications.
D9300 OMS 118 3000 3/4 1.188 75

w w w. r e e l c r a f t . c o m U.S.A. Tel: 800-444-3134


REELCRAFT INDUSTRIES, INC. UK Tel: 44-0-1536-40699
Int'l. Tel: 260-248-8188
P.O. BOX 248 U.S.A. Fax: 800-444-4587
COLUMBIA CITY, IN 46725 U.S.A. Int'l. Fax: 260-248-2605
E-Mail: reelcraft@reelcraft.com
0483-03 5/2/06 9:25 PM Page 1

470-06

ELKHART BRASS MFG. CO., INC.

FIRE FIGHTING MASTER STREAM DEVICES

299-20 MONITOR (STAINLESS 294 DOUBLE WHEEL


STEEL) OPERATED MONITOR
Full 360° rotation and 150° vertical Full 360° rotation and 150° vertical movement
movement controlled by hand wheel controlled by handwheel driven worm gears –
driven worm gears – Monitor locks in Optional with stream shaper tube (282B) and
place where gear is stopped – Full 3-1/2” straight bore tip (181) – Excellent with any
waterway through one-piece #304 combination fog nozzle – Brass construction –
stainless steel tubing – Flows up to 2500 Red acrylic/urethane enamel finish.
GPM with minimal friction loss FM approved.
– Cast stainless steel swivel joints with
stainless steel balls – Ball races have grease 294-11 for flows up to 1100 GPM –
zerks for easy lubrication – Built-in 300# 114 lbs. less tube and tip
pressure gauge – Optional with stream 299-20 w/CJK NOZZLE 294-20 for flows up to 2000 GPM – 294-11 w/CJN-B NOZZLE
shaper (284B) and straight bore tip (181-3) 112 lbs. less tube and tip
– Shown with CJK combination fog nozzle
– Red acrylic/urethane enamel finish.
FM approved. 8393IV MONITOR WITH
299-20 for flows up to 2500 GPM – 104 lbs. INTEGRAL BALL VALVE
Cast brass construction – Full 3.0”
292 HANDLE OPERATED MONITOR unobstructed waterway – Flows up to
Full 360° rotation with stainless steel and 1250 GPM (4730 L/min.) – Handwheel
brass twist locking mechanism – Vertical driven worm gear fully enclosed and protected
movement controlled by stainless steel from the elements – Stainless steel worm –
handle rod with stainless steel and brass Integral 3.0” quarter turn, full flow ball valve –
twist locking mechanism – Optional with Vertical travel from 70° above to 70° below
stream shaper tube (282B) and straight bore horizontal – Gear holds vertical position
tip (181) or combination fog nozzle – wherever it is stopped – Four ball races with
2000 GPM model (292-20DC) – Brass bronze balls and grease zerks for easy
lubrication – Full 360° rotation with positive 8393IV w/optional
construction – Red acrylic/urethane enamel IMS-500
finish. FM approved. 292-6 w/J NOZZLE twist lock – 2.5” male outlet – FM approved
– Finish red urethane enamel – 14.75” wide,
292-6 for flows up to 750 GPM – 46-1/4 lbs. less tube and tip 15.75” deep, 20.375” high.
292-11 for flows up to 1100 GPM – 84-1/4 lbs. less tube and tip
292-20DC for flows up to 2000 GPM – 90 lbs. less tube and tip 8393IV for flows up to 1250 GPM – 68.25 lbs.

293 SINGLE WHEEL OPERATED 8394-02 DOUBLE WHEEL


MONITOR OPERATED MONITOR
Full 360° rotation with stainless steel and brass Full 360° rotation and 135° vertical movement
twist locking mechanism – Vertical movement controlled by fully enclosed, handwheel driven,
controlled hardened steel worm gears with grease zerk –
by handwheel driven worm gear – Optional Double handwheel assures positive lock in any
with stream shaper tube (282B) and straight position – Flows up to 2000 GPM (7570 L/min.)
bore tip (181)
through 4” waterway with cast-in vane – Bronze
– For use with any combination fog nozzle –
Brass construction – Red acrylic/urethane balls in all ball races – Built-in 300# liquid-filled
enamel finish. FM approved. pressure gauge – Male outlet 3-1/2” NHT – Base
inlet is 4” 150# ANSI flange – Optional with
293-6 for flows up to 750 GPM – stream shaper (284B) and deluge tip (181-3)
52-3/4 lbs. less tube and tip – Shown with CJK combination fog nozzle
293-11 for flows up to 1100 GPM – – Brass construction – Red acrylic/urethane 8394-02 w/CJK
90 lbs. less tube and tip enamel finish. 13.25” wide, 20” high. NOZZLE
293-20 for flows up to 2000 GPM – 293-11 w/SM-100B NOZZLE
98 lbs. less tube and tip 8394-02 for flows up to 2000 GPM – 126 lbs. without shaper & tip
Copperhead
ELKHART BRASS MFG. CO., INC. Monitor #8593 PHONE: 574/295-8330
1302 W. BEARDSLEY Brass – 1250 GPM – 16” High FAX: 574/293-9914
P.O. BOX 1127 3” or 4” 150# ANSI Flange E-mail: info@elkhartbrass.com
ELKHART, INDIANA 46515 Continuous 360° Rotation Web: www.elkhartbrass.com
(See our ad for full specs.)
0471-04 5/2/06 9:25 PM Page 1

471-06

ELKHART BRASS MFG. CO., INC.

FIRE FIGHTING MASTER STREAM DEVICES


SM-1250B LOW PRESSURE B-100 BRASS BALL
MONITOR NOZZLE VALVED (GATED) WYE
Constant flows from 300 GPM to 1250 GPM Brass construction – Celcon
(1135 to 4730 L/min) – Operates at 80 psi valve balls with adjustable
rather than 100 psi – Automatically adjusts neoprene seats – Urethane or
to fluctuating flows – Brass and stainless brass handles – 2-1/2” swivel
inlet – Two 1-1/2” male outlets – B-100
steel construction – Large handles to change
stream pattern under pressure – Urethane Finish red acrylic/urethane enamel with Satin Brass or Chrome
SM-1250B plated trim – Conforms to MIL-C-52404.
bumper and grips – No twist shutoff –
2.5” swivel base standard (3.5” optional) –
Satin brass finish.

L-205-B 1-1/2”
WASHDOWN NOZZLE
Cast brass construction – Combination HF-500
fog and straight stream – Twist shutoff and
– 95 GPM standard – 60 or 125 GPM HF-350
optional – U.L. listed – FM approved –
Satin Brass or Chrome plated finish.
L-205-B
HF-500 and HF-350 FOAM EDUCTING
241-N NAVY IN-LINE MASTER STREAM NOZZLES
500 and 350 GPM – 1%, 3%, and 6% proportioning –
FOAM EDUCTOR Optional quick-connect coupling – Optional 3%-6%
90 GPM flow – Detachable metering
valve – Optional shutoff valve – Optional drum pick-up
device is not adjustable (either 3
kit – 2-1/2” rocker lug swivel inlets – Cast brass or
or 6%) – Brass construction –
Chrome plated finish. U.L. listed.
Reinforced clear PVC pick-up
hose – 1-1/2” swivel inlet – 241-N
Finish cast brass – Conforms to
MIL-E-24759 (SH).
LR 1-1/2”
Model: 241-N CELLAR NOZZLE
Hose Size: 1-1/2” For 1-1/2” hose – Four
Maximum Hose Lay: 200’ outlets; two project
Flow Rate: 90 GPM horizontally, one
340 L/Min downward, one upward
Thread Size: 1-1/2” F Inlet LR – Brass construction –
1-1/2” M Outlet CJK Chrome plated finish.
Length: 10”
Weight: 3-3/4 lbs.

315FN BARREL 193-9 193-2-1/2” NINE


STRAINER WITH OUTLET BRESNAN
FOOT VALVE CELLAR NOZZLE
All brass construction – CJK MASTER
For 2-1/2” hose – Nine
Foot valve for holding STREAM NOZZLE outlets; three 9/16”, three
water in suction hose 2000 GPM standard – 1250,
while pump is being 5/8” and three 1/2” – Finish
1500 and 1750 GPM optional cast Chrome – Conforms to
primed – Rigid female – 3-1/2” swivel base – Satin
base 3.0” – Finish cast MIL-N-12314.
Brass standard – Chrome
brass. plated optional.

ELKHART BRASS MFG. CO., INC. PHONE: 574/295-8330


1302 W. BEARDSLEY FAX: 574/293-9914
P.O. BOX 1127 E-mail: info@elkhartbrass.com
ELKHART, INDIANA 46515 Web: www.elkhartbrass.com
468 5/2/06 9:31 PM Page 1

472-06

ANSUL INCORPORATED
FIREFIGHTING FOAM CONCENTRATES
(AFFF) CONCENTRATES Firefighting foam is simply a stable mass of small, air-
filled bubbles with a lower density than oil, gasoline, or
water. It is made up of three ingredients: water, foam
concentrate, and air. The water is mixed with the
concentrate to form a foam solution. This solution is
then mixed with air to produce a foam. Ansul foam
concentrates are available in 5 gallon (19 L) pails, 55
gallon (208 L) drums, or in bulk.

001576 001584

Foam Concentrate Applications Recommended Listings/


Foam Equipment Approvals

ANSULITE® 3x3 3% concentration for both Handline nozzles, eductors, UL listed,


Low Viscosity hydrocarbon and polar standard sprinkler heads, USCG approved,
Alcohol-Resistant solvent flammable liquids foam-water sprinkler heads, FM approved
AFFF including MTBE etc. balanced pressure proportioners,
bladder tanks, foam chambers,
high back-pressure forcing
foam makers, and monitors
ANSULITE® ARC 3% 3% concentration for UL listed
and 6% AFFF hydrocarbon and 6% for DNV F-4862
polar solvent flammable
liquids
ANSULITE® 3% AFFF 3% concentration for On QPL for
(AFC-5-A) hydrocarbon flammable MIL-F-24385F, UL listed,
liquids FM approved, meets
UK Ministry of Defense
standards
ANSULITE® 6% AFFF 6% concentration for On QPL for
(AFC-5) hydrocarbon flammable MIL-F-24385F,
liquids UL listed, FM approved,
meets UK Ministry of
Defense standards,
CGSB (Canada) specs,
and Australian Dept. of
Aviation Standards
JET-X® High-Expansion 2.75% concentration Eductors, balanced pressure UL listed,
Foam Concentrate for local and total proportioners, medium and FM approved
flooding applications high expansion generators

FIRE PROTECTION SERVICE INC. Serving the marine


and offshore
FPS-HOUSTON FPS-NEW ORLEANS FPS-CORPUS CHRISTI industries since 1952
Ph: 713-924-9600 Ph: 504-466-8003 Ph: 361-289-9102 sales@fps-usa.com
Fx: 713-923-6272 Fx: 504-469-9922 Fx: 361-289-1421 www.fps-usa.com
469 5/2/06 9:31 PM Page 642

473-06

ANSUL INCORPORATED
MM-1000 MONITOR The MM-1000 manual monitor is designed to deliver approxi-
HAND SIZE mately 1,000 GPM (3785 LPM), however, actual flow rate is
PLASTIC GRIP
2 1/2” NHT STANDARD
dependent on nozzle choice. This monitor is constructed of con-
STAINLESS STEEL TILLER BAR tinuous tubing which produces less friction loss and better
THREADS
PALM SIZE LOCK stream reach. The balanced design reduces unwanted torque
KNOB (ELEVATION)
3” NOMINAL and swing, while the range of movement is easily operated with
TREATED CARBON
STEEL TUBE the single tiller bar. The horizontal sweep is a full 360° and total
vertical movement is 140° (+90° elevation, –50° depression).
PALM SIZE LOCK
KNOB (SWEEP) 3” ANSI 150# FLANGE STANDARD.
3/4” BOLT HOLE, 6” DIAMETER C/L
4 HOLES EVENLY SPACED

001564

MOBILE FOAM CART The Mobilcart consists of a 30 gallon (114 L) reinforced fiber-
glass tank with a built-in hose storage compartment, bronze
eductor with adjustable metering valve (1% to 6%), 50 feet
(15 m) of 1-1/2 inch fire hose, epoxy finished steel tube chassis,
and a choice of low or high expansion foam nozzles. The cart is
suitable for use with AFFF, alcohol-resistant AFFF, high expan-
sion foam, or protein-based foam concentrates.

Water Inlet Approx. Operating


Pressure Flow at Nozzle Time (Minutes)
psi (kPa) gpm (Lpm) 1% 3% 6%
75 (517) 42 (159) 60 20 10
100 (690) 50 (189) 42 14 7
125 (862) 56 (212) 39 13 6.5
150 (1034) 62 (235) 39 13 6.5
175 (1207) 67 (254) 36 12 6
001563 200 (1379) 71 (269) 36 12 6
250 (1724) 79 (299) 33 11 5.5

BRASS BALL VALVES – M SERIES


M Series ball valves contain forged Naval brass bodies, hard chrome plated brass
J
balls, adjustable stem packing, and 8-position handles. The M101 contains two-way
float seats of Buna-N for use with CO2 and dry chemicals/powders. The M802 uses
Teflon for use with foam concentrates.
G
F Size A B C D E F G H J (sq.) K Weight
D E K in. in. in. in. in. in. in. in. in. in. NPT lb.
H

3/8 2.7 1.6 6.3 1.8 0.5 3.2 2.3 1.1 0.3 3/8-18 0.5
1/2 2.7 1.6 6.3 1.8 0.5 3.2 2.3 1.1 0.3 1/2-14 0.5
B
3/4 3.5 1.8 6.7 2.3 0.8 3.6 2.4 1.4 0.3 3/4-14 1.0
A
C 1 3.9 1.9 6.9 2.6 0.9 4.0 2.7 1.7 0.4 1-11 1/2 2.0
001277 1 1/4 4.3 2.1 9.1 3.8 1.3 4.8 3.1 2.1 0.5 1 1/4-11 1/2 2.0
1 1/2 4.7 2.3 9.3 3.8 1.5 5.0 3.2 2.3 0.5 1 1/2-11 1/2 3.0
2 5.4 2.6 9.6 4.9 1.9 5.8 3.6 2.9 0.5 2-11 1/2 5.0

Visit . . .
www.ansulinfo.com/mar7
800-TO-ANSUL (USA/CAN)
or 715-735-7411 – FAX: 715-732-3608
For additional Marine approved fire protection equipment,
see our page in the advertising section.
470 5/2/06 9:32 PM Page 1

474-06

ANSUL INCORPORATED
MARINE HIGH-PRESSURE CARBON DIOXIDE FIRE SUPPRESSION SYSTEMS
TYPICAL LAYOUT
PRESSURE OPERATED SWITCHES
TIME DELAY SCHEDULE 80 PIPE
WEIGH RAIL

1/4” O.D. S.S. TUBE

PILOT CARBON DIOXIDE CYLINDERS


CYLINDERS PRESSURE OPERATED
SELECTOR VALVE WITH
MANUAL RELEASE

PRESSURE 001565
OPERATED
1/4” SCHD. SIRENS
40 PIPE
BAFFLE NOZZLES
MARINE ACTUATION STATION

As an extinguishing agent, carbon dioxide will not damage cargo The pilot valves can be actuated using several types of manual
or machinery and leaves no residue to clean up. It is electrically and automatic releases; additional cylinder valves are opened
nonconductive and effective on most combustible materials. using manifold backpressure. Accessories include alarms,
Marine carbon dioxide systems consist of one or more steel cylin- switches, and directional or selector valves which allow protection
ders filled with liquid carbon dioxide. A special CV90 cylinder of two or more spaces using a single bank of cylinders.
valve will quickly release carbon dioxide through discharge noz-
zles into the protected space.
Component Material Thread Size/Type Approvals
Cylinder Steel 1-11 1/2 NPT, Female Meets DOT 3A1800 or 3AA1800
CV98 Valve Brass 1-11 1/2 NPT, Male x
1 5/16-12UN-3A Outlet Thread – Male
Safety Relief Valve Brass .6250-18UNF-3B, Male In Accordance with Bureau of Explosives
Valve/Tank Assembly UL (EX-2968), FM Approved, Complies with
Regulations of the U.S. Coast Guard (162.038/7/0)
and meets requirements of NFPA 12.
Shipping Cap Steel 3.125-11 NS1, Female

CYLINDER Part Weight Of CO2 Approx. Weight Dimension A* Dimension B


SHIPPING CAP
No. lb. (kg) lb. (kg) in. (mm) in. (mm)
VALVE
CV98 VALVE SHIPPING CAP Finish: Red Enamel Paint
RECORD SIPHON TUBE 426242 35 (15.9) 121 (54.9) 35 3/4 (908) 8 1/2 (216)
TAG ADAPTOR
426244 50 (22.7) 165 (75) 52 3/4 (1289) 8 1/2 (216)
SIPHON
TUBE
426246 75 (34.0) 200 (91) 57 3/4 (1467) 9 1/4 (235)
426248 100 (45.4) 300 (136) 59 3/4 (1518) 10 3/4 (273)
Finish: Red Epoxy Paint
A
HEIGHT TO 426243 35 (15.9) 121 (55) 35 3/4 (908) 8 1/2 (216)
OUTLET
426245 50 (22.7) 165 (75) 52 3/4 (1339) 8 1/2 (216)
426247 75 (34.0) 200 (91) 57 3/4 (1467) 9 1/4 (235)
426249 100 (45.4) 300 (136) 59 3/4 (1518) 10 3/4 (273)
*Tolerance ± 3/4 in. (19 mm)
B
001416

FIRE PROTECTION SERVICE INC. Serving the marine


and offshore
FPS-HOUSTON FPS-NEW ORLEANS FPS-CORPUS CHRISTI industries since 1952
Ph: 713-924-9600 Ph: 504-466-8003 Ph: 361-289-9102 sales@fps-usa.com
Fx: 713-923-6272 Fx: 504-469-9922 Fx: 361-289-1421 www.fps-usa.com
471 5/2/06 9:34 PM Page 489

475-06

ANSUL INCORPORATED
MARINE LOW-PRESSURE CARBON DIOXIDE FIRE SUPPRESSION SYSTEMS
APPLICATION valves, pneumatic timers, discharge nozzles, alarms, and
Common shipboard applications for low pressure carbon pressure switches.
dioxide systems include engine rooms, pump rooms,
machinery spaces, and cargo holds. Mobile offshore drilling APPROVALS
units also contain many hazards in which these fire Marine Low-Pressure Carbon Dioxide Systems are designed in
suppression systems may be applied. As an extinguishing accordance with NFPA 12 “Carbon Dioxide Extinguishing
agent, carbon dioxide will not damage cargo or machinery and Systems.” They are approved by the U.S. Coast Guard and
leaves no residue to clean up. It is electrically nonconductive listed by Underwriters Laboratories.
and effective on most combustible materials.

DESCRIPTION
Each system includes a refrigerated storage vessel containing
liquid carbon dioxide (3.75 to 60 ton capacity). Typically, a
single tank protects two or more spaces using various
actuation, discharge, and control components as required.
These include pressure-operated control valves, manual control

B A
006242

Dimensional Information Chart


Tank A B C
Capacity Part Length Width Height Empty Weight Weight of CO2 Total Volume
(Tons) No. ft.-in. (m) ft.-in. (m) ft.-in. (m) lb. (kg) lb. (kg) gal. (L)
3.75 416943 11-0 (3.4) 6-2 (1.9) 7-11 (2.4) 8000 (3629) 7500 (3402) 935 (3539)
6 416939 15-0 (4.6) 6-2 (1.9) 8-3 (2.5) 10000 (4536) 12000 (5443) 1541 (5833)
8 418525 18-6 (5.6) 6-2 (1.9) 8-3 (2.5) 11500 (5216) 16000 (7258) 2043 (7733)
10 418921 22-0 (6.7) 6-2 (1.9) 8-3 (2.5) 13000 (5897) 20000 (9072) 6555 (9671)
12 417059 25-10 (7.9) 6-2 (1.9) 8-3 (2.5) 14000 (6350) 24000 (10886) 3082 (11667)
14 416940 18-9 (5.7) 7-6 (2.3) 9-11 (3.0) 15500 (7031) 28000 (12700) 3598 (13619)
18 417060 22-9 (6.9) 7-6 (2.3) 9-11 (3.0) 17800 (8074) 36000 (16330) 4593 (17386)
22 417061 27-0 (8.2) 7-6 (2.3) 9-11 (3.0) 22500 (10206) 44000 (19958) 5585 (21141)
26 416941 31-0 (9.5) 7-6 (2.3) 10-1 (3.1) 25000 (11340) 52000 (23587) 6575 (24889)
30 416942 35-0 (10.7) 7-6 (2.3) 10-1 (3.1) 30000 (13608) 60000 (27216) 7570 (28655)
34 417062 40-9 (12.4) 7-6 (2.3) 10-1 (3.1) 32800 (14878) 68000 (30845) 8564 (32418)
38 417063 44-9 (13.7) 7-6 (2.3) 10-1 (3.1) 38300 (17372) 76000 (34474) 9552 (36158)
42 417064 48-9 (14.9) 7-6 (2.3) 10-1 (3.1) 41000 (18598) 84000 (38102) 10550 (39936)
46 417065 52-6 (16.0) 7-6 (2.3) 10-1 (3.1) 42500 (19278) 92000 (41731) 11520 (43608)
50 417066 56-6 (17.2) 7-6 (2.3) 10-1 (3.1) 45000 (20412) 100000 (45360) 12529 (47427)
60 417067 66-6 (20.3) 7-6 (2.3) 10-1 (3.1) 60000 (27216) 120000 (54432) 15012 (56826)

FIRE PROTECTION SERVICE INC. Serving the marine


and offshore
FPS-HOUSTON FPS-NEW ORLEANS FPS-CORPUS CHRISTI industries since 1952
Ph: 713-924-9600 Ph: 504-466-8003 Ph: 361-289-9102 sales@fps-usa.com
Fx: 713-923-6272 Fx: 504-469-9922 Fx: 361-289-1421 www.fps-usa.com
Ansul 3077 5/2/06 9:36 PM Page 802

476-06

ANSUL INCORPORATED
MARINE ENGINEERED FIRE SUPPRESSION SYSTEM WITH NITROGEN PILOT CYLINDERS
CLEAN AGENT SYSTEMS AND REMOTE PRESSURE OPERATED ACTUATION
3M™ Novec™ 1230 Fire Protection Fluid has been Item Description Item Description
___ _________ ___ _________
developed as a halon replacement alternative to HFCs,
HCFCs, and PFCs in special hazard, high value 1 Nitrogen pilot cylinder 12 1/4 in. check valve
applications. It has unique qualities that provide the 2 Pilot cylinder flexible discharge bend 13 Marine actuation station – two step
right balance of fire extinguishing performance, end use 3 Pilot valve lever release actuator 14 LT-20-L nitrogen cartridge
safety, and environmental sustainability. Novec 1230 4 Connecting link 15 Siren
fluid is low in toxicity and environment impact. It is a 5 Male straight adaptor 16 Pressure switch
liquid at room temperature, with a low vapor pressure, 6 20 in. stainless steel hose 17 SAPPHIRE tank
which allows for ease in handling, storage, and 7 Manifold relief valve 18 Tank bracket
shipping. Novec 1230 contains no Bromine or Chlorine 8 Vent plug 19 Actuation hose
and has no ozone depletion potential. 9 Actuation line vent fitting 20 Male branch tee
SAPPHIRE systems utilize one or more storage 10 Stop/ 21 Male straight adaptor
containers arranged to provide the protected area with a isolation valve 22 Manifold weld inlet
pre-determined quantity of agent. 11 Time delay 14 23 Discharge hose
Novec 1230 fluid suppresses fires by a combination of 24 Discharge nozzle
physical and chemical means. It does not significantly
deplete the oxygen content in the room. 13 15
A complete system includes one or more containers
12 16
connected to a system of piping and nozzles. Novec
24
1230 fluid is liquid under pressure and is stored in steel
containers, each of which is fitted with a valve specially
designed to allow the contents of the container to
22
discharge within 10 seconds. When the valve opens,
Novec 1230 fluid flows into the distribution piping to the
discharge nozzles where it is rapidly dispersed as a 23
vapor. 7 20 21
9
Engineered Fire Suppression Systems are particularly 8 6 4 10 19
valuable in extinguishing fires in enclosures containing
hazards or equipment where a clean, electrically non- 5 3 11
conductive medium is essential or where the cleaning up 2 1
of foam, water or dry chemical would be a problem.
This Fire Suppression System has been tested and 18
listed by…
17
• Underwriters Laboratories, Inc. (EX-4510)
• USCG (162.161/6/0)
• Underwriters Laboratories of Canada 2 IN. FOUNDATION
(BY SHIP BUILDER)
…as an engineered system for Class B and C fire
suppression, at temperatures between 0 °F to 130 °F 2 IN. FOUNDATION
(BY SHIP BUILDER)
(–18 °C to 55 °C).

AGENT TANK SHIPPING ASSEMBLY


The agent tank assemblies are manufactured in accordance with DOT 4BW450 and consist of a tank fitted with a valve and internal siphon tube.
Eight partial filled tank sizes are available. A nameplate is adhered to the tank displaying the agent weight and gross weight. Tanks are
superpressurized with dry nitrogen to 360 psi (25 bar) at 70 °F (21 °C). All tanks are available in multiple fill increments.
Note: Quantity of agent will have to be specified when ordering factory filled tank shipping assemblies.
Also, when low pressure switch and liquid level indicator installed options are required, they must be specified when ordering.
Component
__________ Material
_______ Approvals
_________
Tank Steel DOT4BW450
Valve Brass
Shipping Nominal Approximate Dimension
Assembly Tank Size Agent Quantity Empty Weight “A” Diameter Valve
Part No.
_______ lbs. (kg)
_________ lbs. (kg)
_______________ lbs. (kg)
____________ in. (cm)
__________ in. (cm)
_________ Size
____ A
570635 20 (9.1) 10 to 21 (4.5 to 9.5) 33 (15) 12 (30.4) 10 (25.4) 1 in.
570633 50 (22.7) 20 to 46 (9.1 to 21) 41 (18.6) 19.8 (50.2) 10 (25.4) 1 in.
570634 90 (40.8) 37 to 88 (17 to 40) 57.5 (26) 32.8 (83.3) 10 (25.4) 1 in.
570638 140 (63.5) 58 to 138 (26 to 62.6) 108 (49) 23.5 (59.6) 16 (40.6) 2 in.
570639 280 (127) 116 to 280 (52.6 to 127) 158 (71.7) 40.2 (102) 16 (40.6) 2 in.
570640 390 (177) 161 to 388 (73 to 176) 198 (90) 53.3 (135) 16 (40.6) 2 in.
570641 450 (204) 194 to 459 (88 to 204) 233 (106) 64.3 (163) 16 (40.6) 2 in.
570586 850 (386) 375 to 851 (170 to 386) 456 (207) 57.7 (146.6) 24 (61) 3 in. 006901

DOOLEY TACKABERRY, INC. Distributors of


Fire and Safety Equipment/Systems
SAPPHIRE™
1515 W. 13th Street, Deer Park, TX 77536 Marine Engineered
Tel: (281) 479-9700 • Fax: (281) 479-6321 Fire Suppression Systems
safetyfire.com
473 5/2/06 9:36 PM Page 490

477-06

ANSUL INCORPORATED
AUTOPULSE® IQ-301 ANALOG ADDRESSABLE CONTROL UNIT
For Use In Fire Protection Systems

ALPHA-NUMERIC
PROGRAMMING KEYPAD LED INDICATORS

BATTERY
FAULT LED

HIGH RATE
CHARGE LED

80-CHARACTER LCD
(BACK-LIT)

CURSOR AND
ENTER KEYS

CIRCUIT BREAKER

AC POWER

FOUR CONTROL
SWITCHES

001582

FEATURES APPLICATION
• U.S. Coast Guard Approved (No. 161.002/28/0) The AUTOPULSE IQ-301 Analog Addressable Control
Unit is designed for use in the adverse marine
• Underwriters Laboratories Listed (UL Standard 864)
environment. The unit may be programmed for several
• Marine-approved with use of Drip-Shield, configurations to protect multiple fire hazards. The system
Part No. 418940 has been UL tested to meet specific USCG requirements
• Overall 301 point capability (198 intelligent points, for shock, vibration, and corrosion resistance.
4 programmable bell circuits, 99 programmable relays) Analog smoke detector sensitivity is monitored by
• Field programmable on panel or on PC with user- control unit which will indicate a special trouble condition
defined passwords, plus Autoprogram feature if the detector’s sensitivity moves outside the listed
• Walk Test reports two devices set to same address range. All devices can be installed on the single
• Releasing capability of four independent hazards addressable loop with up to 99 analog addressable
detectors and 99 addressable modules for conventional
• Real time clock with European format option smoke detectors, heat detectors, manual pull stations,
• Adjustable delay timer and discharge timers supervisory switches, alarm devices, releasing devices,
• Auto detector test (meets NFPA 72) and relays. The control unit can be programmed
to provide the specific operating sequence required
for the project.

FIRE PROTECTION SERVICE INC. Serving the marine


and offshore
FPS-HOUSTON FPS-NEW ORLEANS FPS-CORPUS CHRISTI industries since 1952
Ph: 713-924-9600 Ph: 504-466-8003 Ph: 361-289-9102 sales@fps-usa.com
Fx: 713-923-6272 Fx: 504-469-9922 Fx: 361-289-1421 www.fps-usa.com
474 5/2/06 9:37 PM Page 482

478-06

ANSUL INCORPORATED
DRY CHEMICAL FIRE EXTINGUISHERS AA20
MODEL A10H PK10 C10 AA20 PK20 C20
Extinguisher 429003 429009 429015 429006 429011 429017
Part No.
Bracket Part No. 30865 30865 30865 30937 30937 30937
Agency Capacity 10 lb. (4.54 kg) 10 lb. (4.54 kg) 10 lb. (4.54 kg) 20 lb. (9.07 kg) 20 lb. (9.07 kg) 20 lb. (9.07 kg)
FORAY Purple K PLUS-FIFTY C FORAY Purple-K PLUS-FIFTY C
U.L. Rating 10A:60-B:C 80-B:C 40-B:C 20A:120-B-C 120-B:C 80-B:C
Discharge Time 21 seconds 24 seconds 17 seconds 28 seconds 30 seconds 21 seconds
Maximum 19 ft. (5.8 m) 19 ft. (5.8 m) 19 ft. (5.8 m) 22 ft. (6.7 m) 22 ft. (6.7 m) 22 ft. (6.7 m)
Effective Range
Charged Weight 17 lb., 14 oz. 17 lb., 14 oz. 17 lb., 14 oz. 32 lb., 2 oz. 32 lb., 2 oz. 32 lb., 2 oz.
(with agent) (8.13 kg) (8.13 kg) (8.13 kg) (14.60 kg) (14.60 kg) (14.60 kg)
Height 18 1/2” (47.0 cm) 18 1/2” (47.0 cm) 18 1/2” (47.0 cm) 22 1/2” (57.2 cm) 22 1/2” (57.2 cm) 22 1/2” (57.2 cm)
Width 8 1/2” (21.6 cm) 8 1/2” (21.6 cm) 8 1/2” (21.6 cm) 9 1/2” (24.1 cm) 9 1/2” (24.1 cm) 9 1/2” (24.1 cm)
Depth 5 27/32” (14.8 cm) 5 27/32” (14.8 cm) 5 27/32” (14.8 cm) 7 7/32” (18.3 cm) 7 7/32” (18.3 cm) 7 7/32” (18.3 cm)
002320
Listings/Approvals All models U.L. Listed., D.O.T. Approved; U.S.C.G. Approved (with proper bracket)
Hydrostatic Test Requirement: Once Every 12 Years

MODEL I-A-10-G I-K-10-G I-20-G I-A-20-G I-K-20-G A-10-G


Agency Capacity 8.5 lb. (3.7 kg) 9 lb. (4.1 kg) 20 lb. (9.1 kg) 17 lb. (7.7 kg) 18 lb. (8.2 kg)
FORAY Purple K PLUS-FIFTY C FORAY Purple-K
U.L. Rating 4-A:40-B:C 60-B:C 40-B:C 10-A:60-B:C 80-B:C
Discharge Time 14 seconds 19 seconds 13 seconds 20 seconds 21 seconds
Effective Range 17 ft. (5.2 m) 25 ft. (7.6 m) 24 ft. (7.3 m) 20 ft. (6.1 m) 30 ft. (9.1 m)
Charged Weight 20.5 lb. (9.3 kg) 21 lb. (9.5 kg) 38 lb. (17.2 kg) 35 lb. (15.9 kg) 36 lb. (16.3 kg)
(with agent)
Height 16 1/8” (41.0 cm) 16 1/8” (41.0 cm) 20 1/2” (52.1 cm) 20 1/2” (52.1 cm) 20 1/2” (52.1 cm)
Width 8 1/4” (21.0 cm) 8 1/4” (21.0 cm) 10 3/8” (26.4 cm) 10 3/8” (26.4 cm) 10 3/8” (26.4 cm)
Depth 5 1/4” (13.3 cm) 5 1/4” (13.3 cm) 7” (17.8 cm) 7” (17.8 cm) 7” (17.8 cm)
Listings/Approvals U.L., F.M., U.S.C.G. (Approved only with bracket)
Hydrostatic Test Requirement: Once Every 12 Years 001570

CARBON DIOXIDE EXTINGUISHERS


With Steel Shell
MODEL CD10 CD20 CD10
Ext. Part No. 429500 429503
Bracket Part No. 79456 25420*
Agency Capacity 10 lb. (4.54 kg) 20 lb. (9.07 kg)
Carbon Dioxide Carbon Dioxide
U.L. Rating 10-B:C 10-B:C
Weight (with agent) 34 lb. (15.42 kg) 53 1/2 lb. (24.3 kg)
Height 21 1/8” (53.7 cm) 25 5/8” (65.1 cm)
Width 10 7/8” (27.0 cm) 11 7/8” (30.2 cm)
Depth 6 7/8” (17.5 cm) 7 29/32” (20.1 cm)
Listings/Approvals U.L. Listed U.L. Listed
U.S.C.G. Approved * Bracket not Coast
Guard approved
004982
Hydrostatic Test Requirement: Once Every 5 Years

FIRE PROTECTION SERVICE INC. Serving the marine


and offshore
FPS-HOUSTON FPS-NEW ORLEANS FPS-CORPUS CHRISTI industries since 1952
Ph: 713-924-9600 Ph: 504-466-8003 Ph: 361-289-9102 sales@fps-usa.com
Fx: 713-923-6272 Fx: 504-469-9922 Fx: 361-289-1421 www.fps-usa.com
Akron 475 5/2/06 9:38 PM Page 1

479-06

AKRON BRASS COMPANY


1-1/2" INDUSTRIAL TURBOJET NOZZLES
• Brass construction
• All 1-1/2" Industrial Turbojets are FM approved HEAT SENSOR
• 1-1/2" swivel inlet WITH LASER SIGHT
• Only 9.5 oz.
3716 1-1/2" Nozzle • Backlit 7/16” LCD display
• 60-95-125 gpm (230-360-475 lpm)
• Detects surface temperature of
3718 1-1/2" Nozzle -25° to 950°F (-32° to 545°C)
• 95 gpm (360 lpm) • Includes 9V battery and
compact storage case
3719 1-1/2" Nozzle with Pistol Grip Style 9011
• 95 gpm (360 lpm) • D:S-12:1
Style 3721
3721 1-1/2" Nozzle with Pistol Grip
• 60-95-125 gpm (230-360-475 lpm)

2-1/2" INDUSTRIAL TURBOJET NOZZLE


3725 2-1/2" Nozzle MINI HEAT SENSOR
• Brass construction WITH LASER SIGHT
• 120-150-200-250 gpm (450-550-750-950 lpm) • Only 8 oz.
• 2-1/2" swivel Inlet • Backlit 7/16” LCD display
• Detects surface temperature
STYLE LENGTH WEIGHT FLOW SETTINGS of 0° to 525°F (-18° to 275°C)
LBS. GPM LPM • Includes 9V battery
3716 7-7/8" 7-1/2 60-95-125 230-360-475
• D:S-8:1 Style 9011
3718 7-7/8" 7-1/2 95 360 Mini
3719 7-7/8" 8-3/4 95 360
3721 7-7/8" 8-3/4 60-95-125 230-360-475
3725 10-1/4" 12-1/2 120-150-200-250 450-550-750-950

Style 35
LG-25

LINE GAUGES
CAP GAUGE LG-25
Style 34 For use in determining nozzle, static and
HH-PITOT flow pressures
Measures straight tip pressure to • Chrome plated • Available in 1-1/2” and 2-1/2” sizes
determine flow or pumping capacity. • For testing hose and • 0-160 psi pressure gauge
Knife edge on blade cuts stream determining static pressures
cleanly to provide a more accurate • 1/4” NPT petcock to release Style 35
reading. Blade is calibrated for water pressure or trapped air • Available in 2-1/2” and 3” sizes
various tip sizes. Black, rubber- • Available in 1-1/2” and 2-1/2” • Ideal for use in high-rise packs
covered handle grip. sizes • 1-1/2” diameter peanut gauge
0-160 psi gauge standard. Valve for • 1-1/2” 0-300 peanut gauge (0-300) with guard
bleeding off air. Includes protective standard, 2-1/2” Style 32 • 2-1/2” weight: 2 lbs., length: 5-1/2”
carrying case. Hand held pitot fits gauge standard, Style 31 • 3” weight: 1-1/2 lbs., length: 5-1/2”
into rugged carrying case (FK-232) gauge optional on 2-1/2” • Grade B 3%-2%-3% accuracy
with foam cushion. • 1-1/2” weight: 1-5/8 lbs.,
19” W x 13-3/8” D x 7” H length: 5-1/2
• 2-1/2” weight: 3 lbs., length: 6”

SEA SAFETY & SURVIVAL INC. Akron Brass • Crews Eyewear


128 Thompson Road • Houma, LA 70363 MSA • Badger Extinguishers
Phone: (985) 851-1126 or (800) 462-1126 Uvex • Billy Pugh • Safegard
Email: sssi@seasafetysurvival.com
Fax: (985) 879-3335 • www.seasafetysurvival.com Stearns • ACR
0478-04 5/2/06 9:39 PM Page 496

480-06

AKRON BRASS COMPANY


MONITOR SYSTEMS
ELECTRIC PROGRAMMABLE MONITOR SYSTEM ELECTRIC MONITOR SYSTEM
A fully programmable all electric monitor system that A fully remote controlled electric monitor system that allows
incorporates a 5"waterway brass monitor, a fully adjustable brass positioning of the monitor and nozzle from remote locations.
nozzle, and precision positioning motors with PLC drives to allow The system is available in 110 VAC or 220 VAC versions.
automated motion to specific targets. Deployment can be Typical applications include fire suppression, vapor mitigation
accomplished through the use of detectors, a master PLC or and cooling. The standard system includes a monitor, nozzle,
standard remote controls. Typical applications include fire motor, cables, connection box, drive box, and control panel.
suppression, vapor mitigation and cooling. The standard system All components rated for NEC Class 1, Div. 2, and Group C&D
includes a monitor, nozzle, motor cables, junction box, drive box, locations.
control panel and operator interface. The operator interface
allows for preset position programming and system diagnostics. 3678 120 VAC Monitor System
All components rated for NEC Class 1, Div. 2, Group C&D, and For applications requiring basic,
Ee x n IIB T4 locations. electric, remote control.
3698 Electric Programmable Monitor System • Brass construction for use in
For applications demanding more severe environments
precise positioning. • Efficient flows up to 2000 gpm
• Brass construction for use in (7600 lpm) through a 4" waterway
severe environments • Rated for NEC Class 1, Div 2,
• High efficient flows up to 2500 gpm Groups C&D hazardous locations
(7600 lpm) through a 5" waterway • 120 VAC motors with current
• Hazardous environment ratings: NEC limiting and dynamic braking
Class 1, Div. 2, Groups C&D, EEx n IIB T4 • Fixed or automatic baffle nozzles
• Fully programmable for automated positioning STYLE 3678
• Precision positioning motors and programmable
drives for better positioning accuracy
• Fixed or automatic baffle nozzle with wide HYDRAULIC MONITOR SYSTEM
angle fog pattern for vapor mitigation A fully remote controlled electric-hydraulic monitor
system that allows positioning of the monitor and nozzle
from remote locations. The system is available with
electric hydraulic or manual hydraulic control. Typical
applications include fire suppression, vapor mitigation and
cooling. The standard system includes a monitor, nozzle,
hydraulic power unit and controls. All components are
rated for NEC Class 1, Division 2, and Group C&D locations.
3595 Electric Hydraulic Monitor System
For applications where remote operation is a priority.
• Brass or anodized aluminum construction
• High, efficient flows up to 1250 gpm (4800 lpm)
through a 3" waterway
• Hazardous environment ratings: NEC Class 1,
Div. 2, Groups C&D
• Fixed or automatic baffle nozzles: Style 5056
Automatic, Styles 2156, 2158 Fixed
STYLE 3698 • Electric hydraulic power unit for remote
control of all functions
• Optional potentiometers available for
STYLE 3595 position feedback

Akron Brass Company


P.O. Box 86 | Wooster, Ohio 44691
Ph: 330.264.5678 | Ph: 1.800.228.1161 | Fax: 330.264.2944
www.akronbrass.com/industrial.html
0477-04 5/2/06 9:40 PM Page 1

481-06

AKRON BRASS COMPANY


Brass corrosion resistance monitors with 360° travel for MASTER STREAM NOZZLES
greater coverage in industrial and marine environments. 4470 Fixed Gallonage Self-Educting
SINGLE WATERWAY MONITOR Master Stream Nozzle
Designed for educting foam at 1% & 3% at flows up to
Cast-in turning vanes in each elbow for reduced friction
1000 gpm (additional 6% capabilities at 350 & 500 gpm).
loss with 150° vertical travel.
Suitable for heavy duty use on fixed monitors.
3526 • Brass Construction
• Full 3" waterway • Set at 500 gpm (1900 lpm) and field
• Friction loss: 10 psi at 800 gpm (.7 bar at 3030 lpm) changeable to 350, 750 or 1000 gpm
• Height 17" – Width 11-1/2" – Weight 72 lbs. (1325, 2900 & 3800 lpm)
• Inlet 2-1/2" - 4" Flange or 2-1/2" - 3" NPT • Manual Pattern Control
• Outlet 2-1/2" • 2-1/2” Swivel Inlet
• Flows up to 1250 gpm/4800 lpm • With Grease Fitting
3437 • Length 12-3/8”, Weight: 25 lbs.
• Optional Foam Shutoff Valve
• Full 4" waterway
• Optional Drum Kit Style 4470
• Gas spring for better balance with
various nozzle weights
• Friction loss: 20 psi at 2000 gpm Fixed gallonage master stream nozzles with built-in
(1.4 bar at 750 lpm) stream shaper designed for flows up to 1000 gpm.
• Height 18-1/4" – Width 17-1/2" Suitable for heavy-duty use on fixed monitors.
Style 3437
• Weight 114 lbs. • Brass & stainless steel construction
• Inlet - 4" Flange • Set at 750 gpm (2900 lpm), field
• Outlet 3-1/2" NPSH or 4” NH changeable to 500 or 1000 gpm
• Flows up to 2000 gpm/7600 lpm (1900-3800 lpm)
• 2-1/2" female inlet; built-in grease fitting
• Length: 9" – Weight: 23 1⁄4 lbs.
DECK PIPE WATER MONITOR
STYLE 3471 4460 Master Stream
with Twist Shutoff
A self-locking dual handwheel monitor
with a split waterway and cast-in 4461 Master Stream Style 4460
turning vanes. Built-in 200 psi
Single fixed gallonage with a spring loaded baffle for
pressure gauge.
quicker flow selection with a simple turn of the baffle head.
• 135° vertical travel
• Height 20" – Width 13-1/4" 3747 Nozzle
Style 3471
• Weight 75 lbs. • Brass construction
• Inlet 3" - 4" Flange or 3”-4" NPT • Spinning teeth for full fog pattern
• Outlet 2-1/2" NH • 300 - 500 - 800 - 1000 gpm
• Flows up to 1000 gpm/3800 lpm (1140 - 1900 - 3030 - 3800 lpm)
• Length: 8-1/2", weight: 25 lbs.
MASTER STREAM EDUCTORS 489 Plain Deluge Tip
Interchangeable metering orifices allow for 1/2%, 1%, 3%, • Brass construction; rigid female
or 6% pickup rate. Designed for flows at 100-150 psi • 9” length – 2-1/2” thread;
Style 3747
(7-10 bar) operating pressure. Rugged brass construction. 1-1/2” orifice standard; 3 lbs.
• Pickup hose: 10' UV resistant reinforced PVC tubing • 10-1/2” length – 3” NPSH thread;
• Pickup tube: 40" PVC pipe 2” orifice standard; 5 lbs.
• Optional shutoff valve in pickup tube
3488 Discharge Pipe
(must specify)
• 10-1/2” – 11-1/2” length
• 2-1/2" swivel inlet x 2-1/2" male
• Brass construction Style 489
2302 250 gpm (950 lpm) • Built-in fins to maximize
2305 500 gpm (1900 lpm) reach on any monitor.
• 2-1/2” x 2-1/2” (6-3/4 lbs.)
2307 700 gpm (2660 lpm)
• 3-1/2” x 2-1/2” (9-1/4 lbs.) Style 3488
2310 1000 gpm (3800 lpm) Style 2305 • 3-1/2” NSPH x 3” NPSH (9-5/8 lbs.)

SEA SAFETY & SURVIVAL INC.


128 Thompson Road • Houma, LA 70363
Style 3671 Phone: (985) 851-1126 or (800) 462-1126
Water Monitor Complete line of U.S.C.G. marine Email: sssi@seasafetysurvival.com
fire and safety equipment Fax: (985) 879-3335 • www.seasafetysurvival.com
0478 5/2/06 9:41 PM Page 494

482-06

AKRON BRASS COMPANY


TOOL BRACKETS COAST GUARD FOG TIPS
Heavy-duty Tool Brackets with covered jaws for securing various
tools. Akrolite construction. 2033 1-1/2" Fog Tip with Chain
• Fits Style 2032 1-1/2"
Style 40
40 1-1/2" - 2-1/2" Horizontal CG-15 Nozzle
Tool Bracket • USCG Approval No. 162.027/09/0
• Designed for 1-1/2" and 2-1/2" applicators
and other tools such as axe handles with 2047 2-1/2" Fog Tip with Chain
a 1-1/8" to 1-3/4" O.D. • Fits Style 2046 2-1/2"
• Length: 4-1/8", weight: 4 oz. CG-25 Nozzle
Style 2047
• USCG Approval No. 162.027/10/0
42 1-1/2" - 2-1/2" Vertical Style 42
Tool Bracket
• Same as Style 40 except for vertical mount COAST GUARD APPLICATORS WITH FOG HEADS
• Length: 5-5/8", weight: 4 oz. Applicators with stainless steel tubing to Coast Guard
specifications. Improved head and end connectors for increased
strength and durability.
PIERCING APPLICATOR
Use a sledge hammer to drive the Piercing 2415 1-1/2" Applicator
Applicator through concrete block, etc. • 4' long, 60° bend
Designed to get water or foam to hidden • Approval No. 162.027/09/0
trouble spots. Driving button and point • Includes Style 1034 Fog Head
Style 2415
made of hardened tool steel. Impinging Shown with Style
jets for a more dense fog pattern. 2015 1-1/2" Applicator 1034 Fog Head
• 10' long, 90° bend
1088 Piercing Applicator • Approval No. 162.027/09/0
• 1-1/2" swivel inlet Style 1088 • Includes Style 1034 Fog Head
• Specify 3' or 6' length,
weight: 11 lbs. 2225 2-1/2" Applicator
• 125 gpm (475 lpm) • 2-1/2", 90° bend
• 3 lengths available: 6', 10', & 12'
• Approval No. 162.027/10/0 (12' only)
COAST GUARD NOZZLES WITH FOG TIPS • Includes Style 1048 Fog Head

2032 1-1/2" CG-15 Nozzle


• 1-1/2" NH thread only
• Approval no. 162.027/09/0 COAST GUARD FOG HEADS
for nozzle and Style 2415 or
2015 Applicator 1034 1-1/2" Fog Head
• Includes Style 2033 • Fits Style 2415 and 2015
1-1/2" Fog Tip with chain Applicators
• USCG Approval No. 162.027/09/0
2046 2-1/2" CG-25 Nozzle
• 2-1/2" NH thread only 1048 2-1/2" Fog Head
• Approval No. 162.027/10/0 Style 2046 • Fits Style 2225 Applicator and
for nozzle and Style 2225 Shown with Style 2047 Style 2055 Fog Applicator Style 1034
2-1/2" x 12' applicator Fog Tip with Chain • USCG Approval No. 162.027/10/0
• Includes Style 2047 2-1/2"
Fog Tip with chain

STYLE LENGTH WEIGHT INLET STRAIGHT FOG BEND FLOW SETTINGS


LBS. SIZE STREAM HEAD/ GPM LPM
ORIFICE TIP
2015 10' 9-1⁄4 1-1⁄2" - 1034 90° 54 204
2032 10-1⁄4" 9 1-1⁄2" 5⁄8" 2033 - * 55 * 208
2046 11-1⁄2" 14-1⁄2 2-1⁄2" 15⁄16" 2047 - * 106 * 401
2225 6', 10', 12' † 15-3⁄4 2-1⁄2" - 1048 90° 108 408
2415 4' 5 1-1⁄2" - 1034 60° 54 204
3020 8-5⁄8" 7-3⁄4 1-1⁄2" - - - 95 360
3022 8-5⁄8" 7-1⁄8 1-1⁄2" - - - 95 360
* Fog flow only, † 12' length

HOUSTON OFFICE NEW ORLEANS OFFICE


2000 Wayside Drive
Houston, TX 77011
ALEXANDER /RYAN 120 Pintail St.
St. Rose, LA 70087
MARINE & SAFETY CO.
Tel: (713) 923-1671 Tel: (504) 496-0151
MARINE AND OFFSHORE EQUIPMENT SUPPLIER
Tel: (800) 923-1672 LIFE RAFT AND LIFE BOAT SERVICE, USA & INTERNATIONAL Tel: (800) 743-0501
Fax: (713) 923-1972 Fax: (504) 496-0160
sales@alexanderryan.com www.alexanderryan.com sales@armsnola.com
Akron 479 5/2/06 9:42 PM Page 1

483-06

AKRON BRASS COMPANY


COAST GUARD SHIPBOARD VARI-NOZZLES BRASS IN-LINE EDUCTORS
A combination fog and straight stream nozzle designed for Eductors featuring a large easy to read and removable
more efficiency with AFFF or water on board ships. metering dial with infinite settings between 0 and 6%.
• Brass construction Detents at 1/4, 1/2, 1, 3 and 6%.
• 1-1/2" swivel inlet x 1-1/2" male
• Low friction ball and dual seats
• 30" pickup hose standard, 48" optional
for smoother operation
• Length: 7-3/4", weight: 9-1/4 lbs.
• Double row of molded teeth
• Rubber-like bumper and handle The Eductors are rated to flow at 200 psi (14 bar) inlet
pressure and work well with nozzles rated at 75 and 100 psi
• Constant gallonage in all fog and
(5 and 7 bar).
straight stream patterns
• Flush without shutting down Style 3020 3070 60 gpm (230 lpm)
• 95 gpm (360 lpm) only In-Line Eductor
3071 95 gpm (360 lpm)
3020 1-1/2" Shipboard Vari-Nozzle In-Line Eductor
with Pistol Grip Style 2328
3072 125 gpm (475 lpm)
• 1-1/2" NH thread only
In-Line Eductor
• USCG Approval No. 162.027/15/0
2325 95 gpm (360 lpm) Brass In-Line Eductor
3022 1-1/2" Shipboard Vari-Nozzle In-Line eductor designed for use at 125 psi (8.6 bar).
• 1-1/2" NH thread only (Note: Lower eductor inlet pressures reduce nozzle
• USCG Approval No. 162.027/16/0 stream reach.)
• 1-1/2" swivel inlet x 1-1/2" male
• 95 gpm at 125 psi (360 lpm at 8.5 bar),
115 gpm at 200 psi (440 lpm at 14 bar)
BRASS FOG NOZZLES • 1%, 2%, 3%, and 4% foam settings
A combination fog and straight stream nozzle designed for • Removable foam pickup tube with metering dial
more efficiency with foam or water on offshore rigs and in for easy service and testing
industrial applications. • Length: 10-1/8", weight: 7 lbs.
• Double row of molded teeth
• Rubber-like bumper and handle 2328 90 gpm (340 lpm) Brass In-Line Eductor
• 1-1/2" swivel inlet x 1-1/2" male
• Constant gallonage in fog and straight stream patterns
• Includes foam shutoff valve and 60" pickup hose
• Flush without shutting down
• Set at 6% pickup-rate, easily changed to 3%
• 1-1/2" swivel inlet, unless noted • Length: 9-1/2", weight: 8 lbs.
• Repair kits available
PORTABLE BY-PASS EDUCTORS
3015 Nozzle This by-pass eductor has a built-in by-pass chamber,
• 95 gpm (360 lpm) allowing the operator to change from water to foam without
shutting down.
3016 Nozzle
• 125 gpm (475 lpm) • Brass with chrome trim
• Changes easily to water
3019 Nozzle with Pistol Grip Style 3019 line use
• 95 gpm (360 lpm) • 8 quick-change handle
positions with TSC
3021 Nozzle with Pistol Grip Swing-Out valve handle
• 125 gpm (475 lpm) • Optional pipe thread
3025 Nozzle connections available for
• 250 gpm (950 lpm) truck plumbing Style 3097
• 2-1/2" swivel inlet • Length: 18", weight: 20 lbs.

3062 60 gpm (230 lpm) By-Pass Eductor


Style 3025 3097 95 gpm (360 lpm) By-Pass Eductor
3127 125 gpm (475 lpm) By-Pass Eductor

“Se Habla Español” Phone: 713-641-2288


Fax: 713-641-3636
4380 South Wayside Toll Free: 800-532-2672
Suite 100 E-mail: sales@accordintl.com
Houston, TX 77087 INTERNATIONAL, INC. www.accordintl.com
480 5/2/06 9:43 PM Page 482

484-06

AKRON BRASS COMPANY


2681 Brass Leader Line Wye 337 Rigid Female to Male Adapter
Designed for heavy-duty use in severe • Available in cast and chrome in a
environments. combination of sizes from 3/4" to 3-1/2"
• 2-1/2" female inlet x two 1-1/2" male outlets • 2-1/2" x 1-1/2" weight: 1-1/2 lbs.
• Cast brass; weight: 10-1/2 lbs.
Style 2681 Style 337 356 Rigid Female to Male Adapter
• Length: 7-1/2", width: 5-1/4"
• Available in chrome in a combination
of sizes from 2-1/2" - 6"
• 4-1/2" x 2-1/2" weight: 6-1/2 lbs.
260 Plain Wye
• Cast brass or chrome plated trim 345 Hose Cap
• 2-1/2" to 6" female inlet x two 1-1/2" or • For capping male threads
2-1/2" male outlets Style 356 • Brass construction, available in cast
• Length: 6-3/4", width: 8", weight: 7 lbs. or chrome in sizes 3/4" - 3-1/2"
Style 260
• All sizes available with rocker lug,
2" & 3"available with long handle
1482 Hydrant Wye - Brass • Chain optional on all sizes
• 2-1/2" to 6" female inlet x two 2-1/2" • 2-1/2" weight: 1-7/8 lbs.
male outlets
Style 345 448 2 Wrench Holder with Wrenches
• Available in cast and chrome trim
Style 1482 • Anodized aluminum dual wrench holder
designed so wrenches can be snatched
335 Double Female Adapter loose or replaced with one hand.
• Includes 2 Style 10 Wrenches
• For changing male threads to a female thread
• Size: 5" x 11-1/2", weight: 1-1/2 lbs.
with swivel
• Brass with chrome finish in sizes 1-1/2" - 3" 10 Universal Spanner Wrench
• 2-1/2" weight: 1-1/2 lbs. Style 448
Style 335 The all-purpose wrench for 3/4" to 3"
rocker lug and pin lug couplings.
Features a belt hook eye, hammer head
354 Female Swivel to Male Adapter and a gas cock shutoff
• Available in a combination of sizes from • Akrolite construction
Style 10
2-1/2" to 6" long handle swivel standard - • Length: 11-1/2", weight: 8 oz.
rocker lug optional
46 Combination Spanner
Style 354
Designed to fit rocker lug, pin lug and
330 Short Internal Lug Adapter split lug couplings from 3/4" to 3". Gas
• To convert pipe threads to male hose thread cock shutoff in handle.
• Cast or chrome in a combination of sizes from • Akrolite construction
Style 46 • Length: 10-1/4", weight: 8 oz.
1-1/2" - 3"
• Length 2-1/4" 15 Hydrant and Spanner Wrench
• 2-1/2" x 2-1/2" weight: 1-1/2 lbs. Style 330
Adjusts to a pentagon nut up to
1-3/4" from point to flat or to a square nut
up to 1-1/4". Designed to help prevent
331 Long Internal Lug Adapter damage to hydrant nuts. Spanner fits
• Cast or chrome Style 15 2-1/2" to 4-1/2" rocker lug or pin lug
• Same as Style 330 except for 4" length couplings. Plated for corrosion resistance.
• Available in 2-1/2" female NPT x 2-1/2" Replaceable brass insert.
male only • Length: 19-1/2", weight: 5 lbs.
Style 331
• Weight: 2-5/8 lbs.
SS-525 Super Spanner Wrench
Fits any standard 4" and 5" Storz or locking
361 Double Male Hex Nipple type Storz coupling on one end. The other
• For changing pipe thread to hose thread end fits 1 1⁄2" to 3" rocker lug type fire hose
• Available in a combination of sizes couplings. The center slot serves as a gas
from 3/4" - 2-1/2" Style SS-525
shut-off. Bent for easy pick up with a gloved
• 2-1/2" x 2-1/2" weight: 1-3/4 lbs. Style 361 hand; Bright zinc plated.

SS-MP Super Spanner Set


362 Female to Male Hex Nipple
Set includes mounting plate and four
• For changing pipe thread to hose thread
• Available in a combination of sizes SS-525 super spanner wrenches.
from 3/4" - 3"
• 1-1/2" x 1-1/2" weight: 3/4 lbs. Style 362 Style SS-MP

“Se Habla Español” Phone: 713-641-2288


Fax: 713-641-3636
4380 South Wayside Toll Free: 800-532-2672
Suite 100 E-mail: sales@accordintl.com
Houston, TX 77087 INTERNATIONAL, INC. www.accordintl.com
481 5/2/06 9:44 PM Page 1

485-06

MOON AMERICAN, INC.


268-BR Short Shank Couplings
Are cast of high grade red brass for maximum strength.
Recommended when hose is used around salt water, in
mines and when non-sparkng coupling is needed. Pin lug feature.
P / N. Brass Size & Threads
268-BR-150 NST 1-1/2" x 1-1/2" NST
268 359 268-BR-250 NST 2-1/2" x 2-1/2" NST

359 Double Female Hex Coupling


P / N. Size & Threads
359-15 1-1/2" F NPT x 1-1/2" NST
359-25 2-1/2" F NPT x 2-1/2" NST

243-BT Tank Cleaning Coupling


Couplings are made of cast brass and furnished complete
472-BT with four bolt clamps. Please specify thread type when ordering.
243-BT
P / N. Brass P / N. Stainless Steel Shank Size Thread
243-BSP-150C 243-BSP-150C-SS 1-1/2" 1-1/2" BSP
336-S 243-BT-1525 NSL 243-BT-1525 NSL-SS 1-1/2" 2-1/2" NST
243-BT-225 NSL 243-BT-225 NSL-SS 2" 2-1/2" NST

472-BT Tank Cleaning Wye


This wye is made of cast brass and is used for connecting
three lengths of hose.
336-L P / N. Size & Threads
363-M 472-BT 2-1/2" M NST x 2-1/2" M NST x 2-1/2" M NST

363-M Male Swivel Adapters


Available with pin lug or rocker lug swivel
874-BR Brass Universal Spanner Wrench P / N. Size & Threads
363-M-02 1-1/2" F NST x 1-1/2" M NPT
363-M-05 2-1/2" F NST x 2" M NPT
363-M-07 2-1/2" F NST x 2-1/2" M NPT
363-M-08 2-1/2" F NST x 3" M NPT

336-S International Ship Connection


872-SW Aluminum Tabor Spanner Wrench Ship connection is for use with 336-L Shore connection. Flange
is threaded with a 2-1/2" female hose thread and slotted so that it
can be used with non-standard flanges. Connection is supplied
complete with bolts, nuts, washers and gaskets.

336-L International Shore Connection


Shore connection is a 2-1/2" x 7" O.D. Flange threaded with 2-1/2" hose
thread to match hose threads on docks. Flange is drilled to ASA Standards
and is supplied complete with bolts, nuts, washers and gaskets.
843-BT Tank Cleaning Coupling Wrench
for 2-1/2" NST Couplings

ACCORD INTERNATIONAL, INC.


7233 S-W Cast Iron Spanner Wrench
for Storz Fire Hose Couplings

171U 25-NRSGV
358-2525-57
Double Male 2-1/2" NST Adapter 171U Angle Valve 25-NRSGV Fire Hose Valve
for Joining Two Tank Cleaning Double female angle valve, cast 300# Non-rising stem gate valve.
brass. U.L. Listed. Available in Brass construction. U.L. Listed.
Hose Couplings. Brass. 1-1/2" and 2-1/2" sizes with NPT 2-1/2" F NPT x 2-1/2” M NST
threads. threads.

Brass Plain Hose Nozzle “Se Habla Español” 433 Hose Saddle
Is used in conjunction with the
cleaning systems. Saddle is placed
INTERNATIONAL, INC.
over tank cleaning opening to
4380 S. Wayside, Suite 100, Houston, TX 77087 prevent hose from kinking. Clamp
Phone: 713-641-2288 • 800-532-2672 • Fax: 713-641-3636 on saddle secures hose in proper
Available 1-1/2” or 2-1/2” NST E-Mail: sales@accordintl.com • www.accordintl.com position when inserted in tank.
482 5/2/06 9:45 PM Page 1

486-06

MOON AMERICAN, INC.


367 P Hose Increaser (Pin Lug) 661-P Hose Plug and Chain (Pin Lug)
367 R Hose Increaser (Rocker Lug) 661-R Hose Plug and Chain (Rocker Lug)
Hose threads on both ends with male thread always larger than Brass plug and chain in standard hose threads (NH) and NPSH
female thread. threads. Special threads upon request.
Available in sizes 3/4", 1-1/2", 2-1/2", 3", 4", and 4-1/2".
Sizes: 1" x 1-1/2" Rocker lug style available in sizes 1-1/2" and 2-1/2" only.
1-1/2" x 2-1/2"
2-1/2" x 3"
2-1/2" x 4"
367 P

356 Hose Bushing


Female thread is always smaller than male thread. Furnished
tapered pipe thread (NPT) on one end and hose thread on the 661-P
other end with hex wrenching feature.
Sizes: 3/4" x 1" 2" x 2-1/2"
3/4" x 1-1/2" 2" x 3"
1" x 1-1/2" 2-1/2" x 3"
1" x 2-1/2" 2-1/2" x 4"
1-1/2" x 2" 3" x 4" 520 Industrial Fog Nozzle
1-1/2" x 2-1/2" 4" x 4-1/2" Heavy duty fog nozzle. Water flow can be
changed from fog to straight stream with a
364 P Swivel Adapter Double Female (Pin Lug) twist of the nozzle. Brass construction.
364 R Swivel Adapter Double Female (Rocker Lug) Satin finish. Specify NH or NPSH threads.
Made with tapered pipe thread (NPT) on the end having hex Size: 2-1/2”
wrenching feature and hose threads on swivel end with either
pin or rocker lug feature.
Sizes: 1-1/2" x 1-1/2"
2" x 2"
2-1/2" x 2" 572 Brass Plain Hose Nozzle
2-1/2" x 2-1/2" For use on fire hose racks and reels
3" x 2-1/2" and other industrial applications
3" x 3" where shut off valves are not required
364 P 4" x 4" at the nozzle.
Specify NH or NPSH threads.
813 Swivel and Tail Gaskets Sizes: 3/4" x 6" x 1/4"
Replacement gaskets for couplings and adapters. Constructed 1" x 8" x 5/16"
of oil-resistant synthetic rubber. Adhesive resistant.
Sizes: 1", 1-1/2",1-3/4", 2", 2-1/2", 3", 4", 4-1/2", 5" & 6" 1-1/2" x 10" x 1/2"
2" x 12" x 9/16"
2-1/2" x 12" x 1"

Custom Cabinets
For storage of fire hose and accessories. Made to order in a variety
of sizes and materials. Specify the following when ordering:
• Dimensions (L x W x H) • Cabinet Color
• Style White Blue
Surface Red Green
Recessed Other (specify)
Semi Recessed • Material
• Type Steel
For pin rack Aluminum
For hump rack Fiberglass
For pin rack & extinguisher • Door Style
For hump rack & extinguisher Solid
• Hose (length & size) Full Glass
• Valves (number & size) (Specify left or right)

167 B Southwest Cutoff • Nozzles • Valves


Worcester, MA 01604 • Spanners • Hose
Tel: 508.798.8887 • 800.732.3473
Fax: 508.798.7839 • 800.835.1506
• Monitors • Fittings
www.moon-american.com • Wyes • Adapters
483 5/2/06 9:46 PM Page 1

487-06

MOON AMERICAN, INC.

891 – Perforated Tube Type Strainer


This barrel type tube strainer features brass
734 Brass Hose Gate Valve construction and comes complete with
Heavy duty wedge seat gate valve. eyehook. Specify NH or NPSH threads.
Red painted body. Sizes: 1-1/2” & 2-1/2”
2-1/2" hose threads (NH) both sides.

SILBRAZE TO HOSE

251 Brass Long Shank Couplings


Long shank coupling for low pressure
water or steam hose. Use external
bands to secure.
Specify NH or NPSH threads.
Sizes: 3/4", 1", 1-1/2" 958 957

958 – Double Male Silbraze Adapter


Designed for brazing to silbraze valves, flanges and fittings.
Silbraze male one end with male hose thread other end.
268 Brass Short Shank Couplings Cast brass. Sizes: 1/2”, 3/4”, 1”, 1-1/2”, 2”, 2-1/2” & 4”
Cast brass couplings recommended
957 – Female Male Silbraze Adapter
when hose is used around salt water
Designed for brazing to brass pipe. Made with female
or when non-sparking couplings are
silbraze one end with male hose thread other end.
needed. Pin lug style. NPSH threads.
Cast brass. Sizes: 3/4”, 1”, 1-1/2”, 2”, 2-1/2” & 4”
Sizes: 1-1/2", 2", 3", 4", 6"

263 Rack Hose Couplings


For lightweight rack hose.
Sizes: 1-1/2" & 2-1/2"

267 Fire Hose Couplings


For single and double jacket heavy duty fire
hose.
Sizes: 1-1/2", 2", 2-1/2", 3" 937 R 936 R
263 & 267 couplings supplied with
expansion rings and gaskets. Specify hose
936 P – Silbraze Swivel Adapter (Pin Lug)
and bowl size, single or double jacket when 936 R – Silbraze Swivel Adapter (Rocker Lug)
ordering. Adapter has silbraze male for brazing to valves, flanges and
fittings one end with swivel female hose thread other end.
Cast brass. Sizes: 1-1/2” & 2-1/2”
810 Expansion Rings
Replacement expansion rings 937 P – Silbraze Adapter (Pin Lug)
for 263 or 267 fire hose
couplings. 937 R – Silbraze Adapter (Rocker Lug)
Adapter has silbraze female for brazing to pipe one end with
Specify length and diameter swivel female hose thread other end. Cast brass.
when ordering. Sizes: 1-1/2” & 2-1/2”

167 B Southwest Cutoff • Nozzles • Valves


Worcester, MA 01604 • Spanners • Hose
Tel: 508.798.8887 • 800.732.3473
Fax: 508.798.7839 • 800.835.1506
• Monitors • Fittings
www.moon-american.com • Wyes • Adapters
0501-03 5/2/06 9:47 PM Page 498

488-06

FIRE EXTINGUISHING PRODUCTS


ARMTEX FIRE HOSE
Material: Nitrile rubber with polyester reinforcement.
(Norwegian standard, NS, Nos. 4015 and 401.7)
Int. Diameter Weight Bursting Working Order
Inch mm Per Metre Pressure Pressure No.
1-1/2 38 0,27 k 45 bar 25 bar 0100 038
2 51 0,33 k 40 bar 20 bar 0100 051
2-1/2 65 0,55 k 40 bar 20 bar 0100 065

MARTEX FIRE HOSE


Int. Diameter Weight Bursting Working Order
Inch mm Per Metre Pressure Pressure No.
1-1/2 38 0,22 k 65 bar 25 bar 0101 038
2 50 0,35 k 50 bar 20 bar 0101 051
2-1/2 65 0,415 k 45 bar 20 bar 0101 065

SPRAY/JET NOZZLE
The nozzles are available with the following outlet V12:. . . . . . . 2100 012
areas corresponding to diameters 12, 16 & 19 mm. V16:. . . . . . . 2100 016
V19:. . . . . . . 2100 019
Fiberglass Cabinets
Jet/spray branch pipe 2" (51 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2102 051
Applicator pipe 6 ft. (2 m) with V12 nozzle. . . . . . . . . . . . . . . . . . . . . . 2100 216

CABINETS
Cabinet Fiberglass for fire hose max. 20 m . . . . . . . . . . . . . . . . . . . . . 0199 005
V12: 2100 012
HYDRANT V16: 2100 016
Hydrant Valve 2" w/Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 051 V19: 2100 019
Hydrant Valve w/2" male thread wo/flange . . . . . . . . . . . . . . . . . . . . . 2000 251

FIRE HOSE COUPLINGS (European)


Nor I 2" socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1103 151
Nor I 2-1/2" socket . . . . . . . . . . . . . . . . . . . . . . . . . . 1103 165 2000 051
Nor II 1-1/2" socket . . . . . . . . . . . . . . . . . . . . . . . . . . 1104 138
Nor II 2" socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1104 151
Storz C 1-1/2" socket . . . . . . . . . . . . . . . . . . . . . . . . . . 1101 138
Storz C 2" socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1101 151
Storz 65 2" socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1102 151
Storz 65 2-1/2" socket . . . . . . . . . . . . . . . . . . . . . . . . . . 1102 165
Nor Couplings
Storz B 2-1/2" socket . . . . . . . . . . . . . . . . . . . . . . . . . . 1100 165
Storz B 3" socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1100 275
Instantaneous 2" socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1106 051
Instantaneous 2-1/2" socket . . . . . . . . . . . . . . . . . . . . . . . . . . 1106 165

FIRE HOSE COUPLINGS (Russian)


Gost Storz Couplings
Roth

FIRE HOSE COUPLINGS (Japanese)


Nakajima 1-1/2" socket . . . . . . . . . . . . . . . . . . . . . . . . . . 1105 038 Adapters
Nakajima 2" socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1105 151 All coupling adapters available with 2" female thread.
Nakajima 2-1/2" socket . . . . . . . . . . . . . . . . . . . . . . . . . . 1105 165 Blanking Caps / Dust Covers
Machino 2-1/2" socket . . . . . . . . . . . . . . . . . . . . . . . . . . 1220 165 Available for European and Japanese couplings.

Safety Wholesale International Inc. Distributor: High Seas Trading


2703 Preston Road #B, Pasadena, Texas 77503 Miami Tel: 305 358 7455 • Fax: 305 350 6887
Phone: 281 998 9891 • Fax: 281 998 9863
E-Mail: swi_tx@sbcglobal.net
Canaveral Tel:
SWI
321 784 9155 • Fax: 321 784 4007
Long Beach Tel: 562 901 0070 • Fax: 562 901 0080
“Complete line of European portable and semi-portable extinguishers and nozzles”
485 5/2/06 9:48 PM Page 1

489-06

No. 92 - Single Jacket Part I.D. Available


400 PSI Fire Hose UL Labeled Number Size Lengths
Service Pressure: 200 PSI SJ4-92-15xx 1-1/2" 50', 75', 100'
Test Pressure: 400 PSI
SJ4-92- 25xx 2-1/2" 50', 75', 100'
No. 92 - Single Jacket
500 PSI Fire Hose UL Labeled SJ5-92-15xx 1-1/2" 50', 75', 100'
Service Pressure: 250 PSI SJ5-92- 25xx 2-1/2" 50', 75', 100'
Test Pressure: 500 PSI
No. 92 - Double Jacket DJ6-92-15xx 1-1/2" 50', 75', 100'
600 PSI Fire Hose UL Labeled DJ6-92- 25xx 2-1/2" 50', 75', 100'
Service Pressure: 300 PSI Heavy duty rubber lined • Black EPDM tube • White polyester cover
Test Pressure: 600 PSI Fitted with brass NST Rocker Lug couplings
No. 95 - Single Jacket
250 PSI Mill Hose Part I.D. Available
Service Pressure: 125 PSI Number Size Lengths
Test Pressure: 250 PSI SJ25-95-15xx 1-1/2" 50', 66', 75', 100'
• Black EPDM tube
SJ25-95- 20xx 2" 50', 66', 75', 100'
• White polyester staple cover
• Fitted with Storz, Nakajima, John Morris SJ25-95- 25xx 2-1/2" 50', 66', 75', 100'
(British Instantaneous), Machino, etc.

No. RC500SJ - Single Jacket


Rubber Fire Hose - 500 PSI Part I.D. Available Coupled with NST
Service Pressure: 250 PSI Number Size Lengths
Test Pressure: 500 PSI
• Deep ribbed pattern resists abrasion. SJ25-95-15xx 1-1/2" 50', 66', 75', 100'
• Red nitrile synthetic rubber one-piece SJ25-95-20xx 2" 50', 66', 75', 100' Uncoupled
cover and tube/liner. SJ25-95- 25xx 2-1/2" 50', 66', 75', 100'
• Resists most chemicals.
• Meets UL and Factory Mutual Standards.
• 1-1/2" & 2-1/2" fitted with NST Rocker Lug couplings. Also available uncoupled, or fitted
with Storz, Nakajima, John Morris (British Instantaneous), Machino.

PN: 7233-TFN - Three Position Fire Hose Nozzle


Three-position nozzles combine the features of straight stream
and fog nozzles. The lever can be moved from shut off position
to a choice of straight stream or fog spray. When the lever is in
the fog position, the spray is adjusted by twisting the heavy
rubber bumper. Available in 1-1/2", 2" & 2-1/2" with choice of
coupling styles shown below. The coupling adapter is threaded PN: 7233-DC Dust Cap
into the nozzle body to permit interchanging male adapter. Brass hose & valve caps with
Male adapters are also available separately. chain in 1-1/2", 2" & 2-1/2"
1-1/2" Nozzle Part No. 7233TFN-150 Nakajima, Storz, John Morris
2" Nozzle Part No. 7233TFN-200 (British Instantaneous),
2-1/2" Nozzle Part No. 7233TFN-250 Machino & NST.
Nozzle Adapters

John Morris
Machino (British Instantaneous) Storz Nakajima NST
Part Coupling Part Coupling Part Coupling Part Coupling Part Coupling
Number Size Number Size Number Size Number Size Number Size
7233MA-150 1-1/2" 7233BA-150 1-1/2" 7233SA-150 1-1/2" 7233NA-150 1-1/2" 7233NSTA-150 1-1/2"
7233MA-200 2" 7233BA-250 2-1/2" 7233SA-200 2" 7233NA-200 2" 7233NSTA-250 2-1/2"
7233MA-250 2-1/2" 7233SA-250 2-1/2" 7233NA-250 2-1/2"

“Se Habla Español” Phone: 713-641-2288


Fax: 713-641-3636
4380 South Wayside Toll Free: 800-532-2672
Suite 100 E-mail: sales@accordintl.com
Houston, TX 77087 INTERNATIONAL, INC. www.accordintl.com
490-04 5/2/06 9:48 PM Page 1

490-06

DOVER MARINE MFG. & SUPPLY CO., INC.


DOG BOLT WITH WING NUT
Manganese Bronze, Stainless Steel or Steel
D-2307
Dog Bolt with Wing Nut
Diameter 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1”
Wing Span 3” 3” 4” 5” 6” 8” 10” * 10”
2” D-2307-250X02 D-2307-375X02 D-2307-500X02 – – – –
3” D-2307-250X03 D-2307-375X03 D-2307-500X03 D-2307-625X03 – – –
L 4” D-2307-250X04 D-2307-375X04 D-2307-500X04 D-2307-625X04 D-2307-750X04 – –
E 5” D-2307-250X05 D-2307-375X05 D-2307-500X05 D-2307-625X05 D-2307-750X05 D-2307-875X05 –
N 6” – D-2307-375X06 D-2307-500X06 D-2307-625X06 D-2307-750X06 D-2307-875X06 D-2307-1000X06
G 7” – – D-2307-500X07 D-2307-625X07 D-2307-750X07 D-2307-875X07 D-2307-1000X07
T 8” – – D-2307-500X08 D-2307-625X08 D-2307-750X08 D-2307-875X08 D-2307-1000X08
H 9” – – D-2307-500X09 D-2307-625X09 D-2307-750X09 D-2307-875X09 D-2307-1000X09
10” – – – D-2307-625X10 D-2307-750X10 *D-2307-875X10 D-2307-1000X10
11” – – – – – *D-2307-875X11 D-2307-1000X11
12” – – – – – *D-2307-875X12 D-2307-1000X12

DOG BOLT ONLY


Manganese Bronze, Stainless Steel or Steel
D-2000
Dog Bolt Only
Diameter 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1”
2” D-2000-250X02 D-2000-375X02 D-2000-500X02 – – – –
3” D-2000-250X03 D-2000-375X03 D-2000-500X03 D-2000-625X03 – – –
L 4” D-2000-250X04 D-2000-375X04 D-2000-500X04 D-2000-625X04 D-2000-750X04 – –
E 5” D-2000-250X05 D-2000-375X05 D-2000-500X05 D-2000-625X05 D-2000-750X05 D-2000-875X05 –
N 6” – D-2000-375X06 D-2000-500X06 D-2000-625X06 D-2000-750X06 D-2000-875X06 D-2000-1000X06
G 7” – – D-2000-500X07 D-2000-625X07 D-2000-750X07 D-2000-875X07 D-2000-1000X07
T 8” – – D-2000-500X08 D-2000-625X08 D-2000-750X08 D-2000-875X08 D-2000-1000X08
H 9” – – D-2000-500X09 D-2000-625X09 D-2000-750X09 D-2000-875X09 D-2000-1000X09
10” – – – D-2000-625X10 D-2000-750X10 D-2000-875X10 D-2000-1000X10
11” – – – – – D-2000-875X11 D-2000-1000X11
12” – – – – – D-2000-875X12 D-2000-1000X12

METRIC DOG BOLT WITH WING NUT


Manganese Bronze
D-2307 M
Dog Bolt with Wing Nut
Diameter 10 mm 12 mm 16 mm 20 mm 22 mm 24 mm
Wing Span 75 mm 100 mm 125 mm 150 mm 200 mm *250 mm 250 mm
60 mm D-2307M-10X60 D-2307M-12X60 – – –
80 mm D-2307M-10X80 D-2307M-12X80 D-2307M-16X80 – – –
L 100 mm D-2307M-10X100 D-2307M-12X100 D-2307M-16X100 D-2307M-20X100 – –
E 120 mm D-2307M-10X120 D-2307M-12X120 D-2307M-16X120 D-2307M-20X120 D-2307M-22X120 –
N 140 mm D-2307M-10X140 D-2307M-12X140 D-2307M-16X140 D-2307M-20X140 D-2307M-22X140 D-2307M-24X140
G 160 mm D-2307M-10X160 D-2307M-12X160 D-2307M-16X160 D-2307M-20X160 D-2307M-22X160 D-2307M-24X160
T 180 mm – D-2307M-12X180 D-2307M-16X180 D-2307M-20X180 D-2307M-22X180 D-2307M-24X180
H 200 mm – D-2307M-12X200 D-2307M-16X200 D-2307M-20X200 D-2307M-22X200 D-2307M-24X200
220 mm – D-2307M-12X220 D-2307M-16X220 D-2307M-20X220 D-2307M-22X220 D-2307M-24X220
240 mm – – D-2307M-16X240 D-2307M-20X240 *D-2307M-22X240 D-2307M-24X240
260 mm – – D-2307M-16X260 D-2307M-20X260 *D-2307M-22X260 D-2307M-24X260
280 mm – – – – *D-2307M-22X280 D-2307M-24X280
300 mm – – – – *D-2307M-22X300 D-2307M-24X300

For Wing Nuts DOVER MARINE MFG. & SUPPLY CO., INC. For Wing Nuts
Manufacturers of Industrial Marine Equipment
& Swing Nuts, 34-20 56th Street, Woodside, New York 11377 & Swing Nuts,
See Our Telephone: 718-899-3827/8 • Fax: 718-899-6876 See Our
Ad Page E-mail: sales@dovermfg.com Ad Page
Web site: www.dovermfg.com
0491-04 5/2/06 9:50 PM Page 1

491-06

DOVER MARINE MFG. & SUPPLY CO., INC.


When ordering, please specify manganese bronze, stainless steel or steel.

VENT DOG & SKYLIGHT DOG TANK / HATCH COVER DOG & WING NUT
BUTTERFLY NUT & WING NUT

D-2303
D-2306 D-2305 D-2304

D-2306 D-2305 D-2303 D-2304


Vent Dog & Butterfly Nut Skylight Dog & Wing Nut Hatch Dog & Wing Nut Tank / Hatch Dog & Wing Nut
Part Number Size W/S Part Number Size W/S Part Number Size W/S Part Number Size W/S
D-2306-375X06 3/8” x 6” 1-3/8” D-2305-500X06 1/2” x 6” 4” D-2303-875x10 7/8” x 10” 10” D-2304-875X07 7/8” x 7” 8”
D-2306-500X06 1/2” x 6” 1-7/8” D-2305-625X06 5/8” x 6” 5” D-2303-875x11 7/8” x 11” 10” D-2304-875X08 7/8” x 6” 8”
D-2306-625X06 5/8” x 6” 2-5/8” D-2305-750X05 3/4” x 5” 6” D-2303-875x12 7/8” x 12” 10” D-2304-875X09 7/8” x 9” 8”
D-2306-750X06 3/4” x 6” 3-1/2” D-2305-750X06 3/4” x 6” 6” D-2303-875x13 7/8” x 13” 10”
D-2305-750X08 3/4” x 8” 6” Acme Thread

JAW DOG EYE BOLT OFFSET DOG SHAPED HEAD DOG


& WING NUT & SWING NUT & WING NUT & HEX NUT

D-2302 D-2301 D-2300


D-2308

D-2302 D-2301 D-2300 D-2308


Jaw Dog & Wing Nut Eye Bolt & Swing Nut Offset Dog & Wing Nut Shaped Head Dog Hex Nut
Part Number Size W/S Part Number Size W/S Part Number Size W/S Part Number Size W/S
D-2302-375X06 3/8” x 6” 3” D-2301-500X06 1/2” x 6” 3” D-2300-375X06 3/8” x 6” 3” D-2308-625X05 5/8” x 5” 5”
D-2302-500X06 1/2” x 6” 4” D-2301-500X08 1/2” x 8” 3” D-2300-500X06 1/2” x 6” 4” D-2308-750X05 3/4” x 5” 5”
D-2302-625X05 5/8” x 5” 5” D-2301-625X06 5/8” x 6” 3-1/2” D-2300-625X07 5/8” x 7” 5”
D-2302-750X06 3/4” x 6” 6” D-2301-625X08 5/8” x 8” 3-1/2” D-2300-750X06 3/4” x 6” 6”
D-2302-875X10 7/8” x 10” 8” D-2301-750X06 3/4” x 6” 5-1/2” D-2300-750X08 3/4” x 8” 6”
D-2301-750X08 3/4” x 8” 5-1/2” D-2300-750X10 3/4” x 10” 6”
D-2301-875X06 7/8” x 6” 5-1/2” D-2300-875X08 7/8” x 8” 8”
D-2301-875X09 7/8” x 9” 5-1/2” D-2300-875X10 7/8” x 10” 10’

Metric Threads DOVER MARINE MFG. & SUPPLY CO., INC. Swing Nuts
Toggle Pins Manufacturers of Industrial Marine Equipment
34-20 56th Street, Woodside, New York 11377 Washer Faced Hex
Hinge Pins Telephone: 718-899-3827/8 • Fax: 718-899-6876 Nuts
Shoulder Eye E-mail: sales@dovermfg.com
Portlight Dogs
Bolts Web site: www.dovermfg.com
0489-04 5/2/06 9:51 PM Page 1

492-06

DOVER MARINE MFG. & SUPPLY CO., INC.


WATERTIGHT DOOR DOGS
Manganese Bronze and Aluminum Specify Type Below: Right Hand, Left Hand or Neutral.
Shaft Diameter ‘A’, Shaft Length ‘B’

WTD-3400 WTD-3401 WTD-3402 WTD-3403


Left, Right or Neutral Neutral only Left, Right or Neutral Left, Right or Neutral

WTD-3404 WTD-3405 WTD-3406 WTD-3407 WTD-3408


Neutral only Neutral only Neutral only Left or Right Left, Right or Neutral

WTD-3409 WTD-3410 WTD-3411 WTD-3412 WTD-3413


Neutral only Neutral only Left, Right or Neutral Neutral Neutral

BRONZE DOOR WEDGES

Left
or Left
Right or
WATERTIGHT Right
DOOR BUSHINGS
WTD-3402-B
Specify I.D., O.D.
and length WTD-3405t WTD-3405u WTD-3405v WTD-3405w WTD-3405x WTD-3405y WTD-3405z

Expandable DOVER MARINE MFG. & SUPPLY CO., INC. Ullage Screens
Manufacturers of Industrial Marine Equipment
Scupper Plugs 34-20 56th Street, Woodside, New York 11377 Flanges
Deck Cover Plates Telephone: 718-899-3827/8 • Fax: 718-899-6876 Rubber Tanker
Ullage Covers E-mail: sales@dovermfg.com Buckets
Web site: www.dovermfg.com
0493-04 5/2/06 9:52 PM Page 1

493-06

G-1904
DOVER MARINE MFG. & SUPPLY CO., INC.
RAPID ACTION DECK COVER
For Tank-Cleaning Openings
Suitable for new construction and conversion.

Weight: 31 lbs. Approx.

Dover Deck Covers can be


used as tank ventilators in
Top View place of ventilating gratings.
They can be quickly set over
the opening and remain
stable.

Bottom View

Outer O-ring Seal


(Buna N)
13" I.D. x 1/2"

TRI-CLAMP
Manganese Bronze
G-1904-B
G-1905

CLAMP SCREW BRONZE DECK COVER


(Manganese Bronze) SPEED WRENCH
G-1904-C G-1904-A

• RAPID-SINGLE ACTION TO OPEN OR • ELIMINATES COSTLY REPLACEMENTS


CLOSE WITH SPEED WRENCH. OF STUDS, NUTS & WASHERS.
• FLAT, WITH NO PROJECTIONS, • FITS STANDARD 12-1/2" DECK
PROVIDING MAXIMUM SAFETY. OPENING WITH ANY DECK
• INSTALLED IN SECONDS. THICKNESS UP TO 3".
• REPLACEABLE O-RING SEAL. • MATERIAL: NON-SPARKING BRONZE

Expandable DOVER MARINE MFG. & SUPPLY CO., INC. Ullage Screens
Manufacturers of Industrial Marine Equipment
Scupper Plugs 34-20 56th Street, Woodside, New York 11377 Flanges
Deck Cover Plates Telephone: 718-899-3827/8 • Fax: 718-899-6876 Rubber Tanker
Ullage Covers E-mail: sales@dovermfg.com Buckets
Web site: www.dovermfg.com
0494-04 5/2/06 9:52 PM Page 1

494-06

DOVER MARINE MFG. & SUPPLY CO., INC.

ULLAGE
ASSEMBLIES

U-2509 U-2500-A
Schedule of Materials Schedule of Materials
Pc. No. Description Material Pc. No. Description Material
1 Cover Steel 1 Cover Bronze
2 Coaming Steel 2 Coaming Steel
3 Yoke Manganese Bronze 3 Yoke Manganese Bronze
4 Dog Bolt Manganese Bronze 4 Stem Brass
5 Swing Nut Manganese Bronze 5 Handle Manganese Bronze
6 Flame Screen Bronze 6 Flame Screen Bronze
7 Gasket Neoprene 7 Gasket Neoprene
8 Clevis Type Hinge Pin Brass 8 Clevis Type Hinge Pin Brass
9 Clevis Type Hinge Pin Brass 9 Toggle Pin Bronze
10 Clevis Type Hinge Pin Brass 10 Keeper Plate Bronze
Sizes available: 6”, 8”, 10” and 12” Sizes available: 6”, 8”, 10” and 12”

ULLAGE SCREEN

MINI ULLAGE BRONZE


ASSEMBLY ULLAGE
ASSEMBLY
Complete with
Complete with Flange
steel coaming,
bronze cover,
screen, dog bolt
& wing nut
U-2500 U-2503
Part Number Size
Part Number Size
U-2503-06 6”
U-2600 U-2500-06 6” U-2503-08 8”
Part Number Pipe Size U-2500-08 8” U-2503-10 10”
U-2600-35 3-1/2” U-2500-10 10” U-2503-12 12”
U-2600-40 4” U-2500-12 12” U-2503-SPC Special up to 20”

Wire Cloth DOVER MARINE MFG. & SUPPLY CO., INC. Deck Covers
Manufacturers of Industrial Marine Equipment
Ullage Covers 34-20 56th Street, Woodside, New York 11377 Deck Drains
Coamings Telephone: 718-899-3827/8 • Fax: 718-899-6876 Scupper Strainers
E-mail: sales@dovermfg.com
Dog Bolts “T” Bolts
Web site: www.dovermfg.com
0495-04 5/2/06 9:53 PM Page 1

495-06

DOVER MARINE MFG. & SUPPLY CO., INC.


ULLAGE COVERS CARGO TANK TOP INSPECTION ULLAGE SCREENS
U-2501 SIGHT WITH DEMISTING WIPER Light duty brass ullage screen with
Specify Bronze or Aluminum double fine stainless steel mesh.
For 6", 8" and 10" pipe sizes.

U-2504
Part Number Size
U-2504-06 6”
U-2508 U-2504-08 8”
Brass or Stainless Steel wiper fittings U-2504-10 10”
U-2504-12 12”
with rubber wiper blades.
U-2504-SPC Special up to 20”
Specify O.D. and glass thickness. Specify: Flange O.D., Body O.D. and Overall Height
Glass frame optional.
Bronze ullage screen with fine and
ULLAGE COVER SUB-ASSEMBLIES coarse stainless steel mesh.
Bronze and Aluminum STRONGBACK YOKES
Manganese Bronze & Aluminum
Standard or clevis type
When ordering, specify center-to-center
hole dimension.

REPLACEMENT MESH
1. U-2506-F: Fine 30 x 30 mesh.
3. U-2506-C: Coarse 2 x 2 mesh.
Furnished in any diameter in
U-2502 stainless steel and brass.
2 Complete with Acme threaded Stem, Hex
5. Nut, Wing Nut (Handle), Toggle Pin with TANK CLEANING HOLE
Chain, Hinge Pin, Washers and Cotters. COVER PLATES
4. G-1900
18” diameter
2a SAFETY ALUMINUM GRATING 11/16” thick
10-7/8” bolt holes
2b FOR TANK CLEANING HOLES
on a 15-5/16”
Eliminates accidents from uncovered diameter bolt
1. Cover Plate with Gasket holes. Provides safety, light and air. circle. Available
2. Strong Back (Yoke) in steel or bronze.
2a. Toggle Pin with Chain
2b. Hinge Pin with Washers and Cotters
3. Acme Threaded Stem and Hex Nut COVER PLATE GASKET
4. Wing Nut (Handle)
5. Keeper Plate and Screw G-1908
G-1901 (Std.): 11-7/8” I.D. x 13-7/8” O.D. Vegetable fiber,
When ordering item #1, specify outside neoprene rubber
diameter of Ullage Cover or applicable G-1901A: 15” I.D. x 16-5/8” O.D.
or pressed
pipe size. When ordering item #2,
fiberboard.
specify center to center of holes.

Toggle Pins DOVERMARINE


DOVER MARINE MFG. MFG.&&SUPPLY SUPPLY CO., INC.INC.
CO.,
Manufacturers of Industrial Marine Equipment
DIV. DOVER SUPPLY COMPANY
Deck Drains
Ullage Cover 34-20 56th Street, Woodside, New York 11377 Sampling Bottles
Gaskets Manufacturers of Industrial
Telephone: 718-899-3827/8 Marine
• Fax: Equipment
718-899-6876
34-20 56th Street,
E-mail: Woodside, New York 11377
sales@dovermfg.com Sounding Plugs
Jack Chain
Telephone: 718-899-3827/8 • Fax: 718-899-6876
Web site: www.dovermfg.com
0496-04 5/2/06 9:54 PM Page 1

496-06

DOVER MARINE MFG. & SUPPLY CO., INC.

TANK CLEANING FLANGED VALVE WHEEL WRENCHES TOGGLE PINS


FITTING For opening and closing cargo valves.
Specify Aluminum or Steel

CLAW TYPE – W-2201


Overall Length: 21" A = Length B = Diameter
Handle Diameter: 1-1/4" All sizes available in bronze, steel
Manganese Bronze and stainless, with or without chain
and rings.
Trunk When ordering, specify material and
size (measured from under the
shoulder to beginning of slot).
B-1096 – Flanged fitting to fit
standard tank cleaning openings.
STANDARD TYPE – W-2202
Suitable for Coppus Blowers and DECK COVER LOCKING DOG
Lengths: 12", 14", 16", 18", 24" and 36"
Tank Cleaning Equipment. Bronze
Manganese Bronze or Aluminum
(Specify Size) with O-rings, Hex Nuts and Square
Keys
SPRING ALLOY PLATE EXPANDABLE
LIFTING STRAPS SCUPPER PLUGS
For lifting tank cleaning plates R-3803
G-1902 Bronze with Neoprene sleeve
Dia: 3/4" Eye: 21/32"
Brass
D-2312A – 5-3/8" O.A.L.
D-2312B – 6-1/4" O.A.L.

STUDS AND NUTS FOR HINGE PIN WITH COTTER PINS


SECURING TANK CLEANING
COVER PLATES

STUD
R-4300
R-3803
Standard
G-1900a Expandable Scupper Plugs
3/4” x 2-1/2” standard stud size Bronze with Neoprene Sleeve
in Brass or Stainless Steel Part Number Plug Size Bore
R-3803-10 1" 1-1/2"
R-3803-15 1-1/2” 2”
R-4301
R-3803-20 2" 2-1/2”
R-3803-25 2-1/2" 3" Clevis Type
R-3803-30 3" 3-1/2"
R-3803-35 3-1/2" 4"
R-3803-40 4" 4-1/2"
Specify: Diameter, length and material
R-3803-45 4-1/2" 5" (Brass, Steel, or Stainless Steel)
H.D. CAP NUT H. D. HEX NUT R-3803-50 5" 5-1/2"
G-1906 G-1907 R-3803-55 5-1/2” 6”

DOVER MARINE MFG. & SUPPLY CO., INC.


“T” Wrenches Manufacturers of Industrial Marine Equipment Blind Flanges
Deck Covers 34-20 56th Street, Woodside, New York 11377 Scupper Strainers
Telephone: 718-899-3827/8 • Fax: 718-899-6876
Open Flanges E-mail: sales@dovermfg.com Strainer Plates
Web site: www.dovermfg.com
0497-04 5/2/06 9:54 PM Page 509

497-06

DOVER MARINE MFG. & SUPPLY CO., INC.


PORTLIGHT SCREENS BRONZE AND ALUMINUM BRONZE PORTLIGHT DOGS
3002 PORTLIGHTS WITH ACME THREADS
PH-3303

Type A - Galvanized rim,


bronze mesh.
Type B - Brass rim, bronze mesh.
Type C - Stainless steel rim and mesh.
Specify portlight size when ordering.
PH-3300 with PH-3301 with
oblong nut diamond nut
PORTLIGHT SCREEN WITH
RUBBER SCOOP Available with or without PH-3309 cover.
3000 Sizes - 8", 10", 12", 14", 15", 16", 18".
Specify size and spigot length required.
(Depends on thickness of bulkhead.)

Parts available:
PH-3307 Retaining ring wrench
PH-3308 Retaining ring (bezel)

ALUMINUM PORTLIGHT COVER


PH-3309 PH-3302 with PH-3310
round nut Dog & nut

Type A - Galvanized frame, rubber


scoop, bronze mesh.
Type B - Brass frame, rubber scoop,
bronze mesh.
Type C - Stainless steel frame,
rubber scoop, stainless Specify diameter of cover or portlight
steel mesh. size when ordering.
Specify portlight size when ordering. PH-3304 with securing plate
PORTLIGHT GLASS (2" x 2-1⁄4" x 3/8")

PORTLIGHT SCREEN RETAINING RING WRENCH Portlight Dogs & Nuts


Acme or Standard Thread
WITH METAL WIND SCOOP PH-3307 Part. No. Diameter Length
3001 PH-3300-625X04 5/8” 4”
PH-3300-625X05 5/8" 5"
Specify galvanized, brass, or stainless Steel construction. Specify PH-3300-750X05 3/4" 5"
steel. Also specify portlight size when portlight size.
PH-3301-625X04 5/8" 4"
ordering.
PH-3301-750X04 3/4" 4"

PORTLIGHT CHAIN PORTLIGHT GLASS PH-3302-625X04 5/8" 4"


PH-3302-625X05 5/8" 5"
PH-3351
PH-3302-750X04 3/4" 4"
Stainless steel chain & pin. PH-3302-750X05 3/4" 5"
Length – 7"
Strap Length – 1-7/8" PH-3304-500X04 1/2" 4"
PH-3304-625X04 5/8" 4"
PH-3304-750X04 3/4" 4"
PH-3306 PH-3310-500X03 1/2" 3"
Specify glass O.D. and thickness. PH-3310-500X04 1/2” 4”
PH-3310-625X04 5/8” 4”

Fixed Portlights DOVER MARINE MFG. & SUPPLY CO., INC. Ring Nuts
Manufacturers of Industrial Marine Equipment Anti-Pilfering
Portlight Glass 34-20 56th Street, Woodside, New York 11377 Screens
Retaining (Bezel) Telephone: 718-899-3827/8 • Fax: 718-899-6876
E-mail: sales@dovermfg.com Retaining Ring
Rings Wrenches
Web site: www.dovermfg.com
0498-04 5/2/06 9:55 PM Page 1

498-06

DOVER MARINE MFG. & SUPPLY CO., INC.


TANKER PAIL
MANGANESE BRONZE Contains Dupont Neoprene. Special brass bail. This
SAFETY SWIVEL HOOK well balanced, reinforced rubber-fiber pail is designed
(With Stainless Steel Latches) for tank cleaning and overall economy on board. Non-
B-1093 sparking for use on oil tankers.
5" Overall length; 1" Eye
For mucking winch cables

DECK SOUNDING PLUGS


With 3/4" square ‘T’ wrench hole.
BRONZE
No. Thread Size
P-3900-1 1-1/2" NPT
P-3900-2 2" NPT
P-3900-3 2-1/2" NPT With
Safety Bail TA41-10
P-3900-4 3" NPT
TA41-10L

ALUMINUM TANK Approx. Approx.


CLEANING HOE Model Capacity Gross Wt. Dimensions
B-2402 No. (Per Doz.) Top Dia. Height
(For Scraping between Coils) TA41-10L 10 Qt. 36 lbs. 10-1/4" 12-1/4"
Blade 3" x 6" with 12" handle. TA41-10 10 Qt. 36 lbs. 10-1/4” 12-1/4”

ALUMINUM TANK CLEANING BUCKET


SLUDGE SCOOPS

DIE STAMPED - ALUMINUM


No. B-2515
B-2600 B-2400
15 Quarts 15 Quarts
O.D. 10" O.D. 10"
CAST ALUMINUM H.D. Ht. 11" Ht. 11"
No. B-2401
Heavy Duty

NON-SPARKING
POLYPROPYLENE
No. B-2520 H.D.
STAINLESS STEEL
NON-SPINNING CABLE
No. Material Length Width For mucking winches. 3/16"
B-2515 Alum. Die Stamped 10-3/4" 4-1/4" Cable with bronze safety
B-2516 Alum. Die Stamped 13-3/4” 4-1/4” swivel hook.
with Wooden Insert
Cast Aluminum B-1095-A 100’ length
B-2401 (Heavy Duty) 12-3/4" 4-1/2" B-1095-B 150’ length
B-2519 Fiberglass 13-3/4" 4" B-1095-C 200’ length
B-2520 Polypropylene H.D. 13-3/4" 4"

Safety Gratings DOVER MARINE MFG. & SUPPLY CO., INC. Tank Cover Plates
Mucking Winch Manufacturers of Industrial Marine Equipment
Cables 34-20 56th Street, Woodside, New York 11377 Sludge Scoops
Telephone: 718-899-3827/8 • Fax: 718-899-6876 Cleaning Hoes
Safety Hooks E-mail: sales@dovermfg.com
Exp. Scupper Plugs Scrapers
Web site: www.dovermfg.com
0511-03 5/2/06 9:56 PM Page 1

499-06

DOVER MARINE MFG. & SUPPLY CO., INC.


BRASS JOINTED SOUNDING RODS BRONZE UNIVERSAL JOINT
with attachment ring DJ-2000
Standard Type

Cat. No. Rod Sizes Outside Overall


Available Diam. Length Weight
DJ-2000-1 1/4", 1/2", 3/4" 1-5/8" 3-7/8" 2-1/2 lbs.
DJ-2000-2 7/8", 1", 1-1/8" 1-7/8" 7" 5 lbs.
DJ-2000-3 1-1/4", 1-1/2", 1-3/4" 2-3/4" 8-3/4" 12 lbs.
ENGLISH -7/16" Dia., graduated in 1" increments.
METRIC - Graduated in 50mm increments Actual rod size must be specified when ordering.

ENGLISH METRIC
No. Length No. Length
BRONZE HOSE SPANNERS
SR-1000-1 3 ft. SR-2000-1 1m
SR-1000-2 4 ft. SR-2000-2 2m
SR-1000-3 6 ft.
For hose couplings G-1900-C
DECK & GANGWAY STANCHIONS
P-4100A - 1-1/2” Spanner, bronze, for 2” hose coupling
(Up to 40" in Height)
P-4100B - 2-1/2”

SAMPLING BOTTLES & HOLDERS


(For Testing Fluids - 1 qt. Capacity)

NARROW NECK BOTTLE WIDE NECK BOTTLE


B-2411 B-2410
Brass Brass
Dia: 2-3/4" Dia: 2-3/4"
Overall Length 21" Overall Length: 21"
Weighted Bottom

BOTTLE HOLDER
ST-6010 ST-6030 ST-6040 B-2412
Cast Galvanized Cast Steel or Stainless Steel
Aluminum Steel Aluminum Dia: 4-5/8"
Length: 8"
"J" BOLTS "U" BOLTS "U" BOLTS with Strap Overall Length: 19-1/4”
With Hex Nuts With Hex Nuts Washers & Hex Nuts
C "J" Bolts and "U" Bolts are available in
Galvanized Steel, Brass, Stainless Steel
H-3500
and Aluminum in all sizes.
D All Sizes
Std. 3/8” x 3” Specify: A, B, C, & D dimensions as well
B
H-3600 B H-3600-A as the material desired.
A B
A: Stock Size
D D
B: Overall Length
A A C: Center to Center
C C D: Thread Length

Economy Deck DOVER MARINE MFG. & SUPPLY CO., INC. Scupper Strainers
Drains Manufacturers of Industrial Marine Equipment Deck Sounding
Traps & Baffles 34-20 56th Street, Woodside, New York 11377 Plugs
Telephone: 718-899-3827/8 • Fax: 718-899-6876
Inv. Vent Ch. Valves E-mail: sales@dovermfg.com
“T” Wrenches
“J” Bolts Web site: www.dovermfg.com “U” Bolts
0500-04 5/3/06 9:45 AM Page 1

500-06

DOVER MARINE MFG. & SUPPLY CO., INC.


LIFEBOAT EQUIPMENT 7" PROVISION TANK
FLOTATION TANK WATER TANK HINGED COVER
K-1502 K-1503 K-1500a
Air or kapoc filled. Airtight & Waterproof Specify Bronze or Aluminum

A
A

PROVISION TANK
K-1500 Open Cover
Airtight & Waterproof
Specify Galvanized Steel or LIFE BOAT TANK
Stainless Steel and give dimensions
DOGS & NUTS
A, B, & C when ordering.
K-1500b-1 Bronze
A K-1500b-2 Aluminum

5/16" x 1-1/2" for use with


K-1500a cover assembly.

PASSAGEWAY RAT GUARDS


ASHTRAY RG100-1
E-4000 36" Dia.
Galvanized Steel
RG100-2
4" x 6" with wall
24" Dia.
mounting bracket.

Galvanized steel, rolled edges.


Adjusts for 1" to 3" diameter ropes.

AIR REGISTERS
FOG GONG 2-1/4" Wide RG-101 H.D.
(Lever operated)
G-950 16-3/16" Dia. 24” wide x 30” high.
G-1800
Steel with For rope sizes up to 3”.
Bulkhead mounted. Aluminum
Rawhide Mallet. Galvanized steel welded
construction. Specify length and
width of opening. construction

ALUMINUM FID
F-8000
17-3/4" x 1-3/16" Tapered

DOVER MARINE MFG. & SUPPLY CO., INC.


Spare Parts Boxes Manufacturers of Industrial Marine Equipment Deck Stanchions
Fuel Tanks 34-20 56th Street, Woodside, New York 11377 Toggle Pins
Telephone: 718-899-3827/8 • Fax: 718-899-6876
Eyebolts E-mail: sales@dovermfg.com Ring Nuts
Web site: www.dovermfg.com
0501-04 5/3/06 9:46 AM Page 1

501-06

DOVER MARINE MFG. & SUPPLY CO., INC.


PERFORATED METAL
STRAINER BASKETS
Available in Steel, Brass & Stainless Steel.
See basket data specification form below.
Specify material, perforation (and mesh size
if required for inner liner).

BASKET DATA
Insert dimensions (in inches) opposite the
numbers indicated.

1. Perforation Size
2. Bottom Diameter
3. Height of Basket
4. Height, Overall
5. Dia. across Flange
6. Top Diameter

BALL FLOATS
Stainless Steel and Copper

F-2600-C F2602-V
Spherical Shaped Floats For Vent Check Valves
Specify diameter, length, Specify diameter and
coupling thread and material.
material.

F-2602-S F-2600
With coupling specify Specify ball diameter,
diameter, coupling as well as length &
thread and material. diameter of tubing.

HEAVY DUTY DECK DRAINS


BRONZE STRAINER
Pipe Size Diameter Height R3802
Dim. "A" Dim. "B" Dim. "C" With baffle for H.D. 1-1/2" or 2"
1-1/2" 4-7/8" 3-7/8" deck drain. Center screw
2” 5-3/4" 4" connection. Specify deck
2-1/2" 6-7/8" 4-9/16" drain size.
3" 7-7/8" 5-1/8"

BRONZE DECK SCUPPER


STRAINER PLATES
R3807 R3805 R-3800
Drain with Drain with
Trap Trap & Baffle Sizes: 3", 3-1/2", 4"
4-1/2", 5", 5-1/2" & 6”

Rust Preventative DOVER MARINE MFG. & SUPPLY CO., INC. Threaded Studs
Lubricants Manufacturers of Industrial Marine Equipment
34-20 56th Street, Woodside, New York 11377 Tank Air
Strainers
Telephone: 718-899-3827/8 • Fax: 718-899-6876 Escape Valve
Inverted Vent E-mail: sales@dovermfg.com
Check Valves Gratings
Web site: www.dovermfg.com
0515-03 5/3/06 9:48 AM Page 515

502-06

BFG MARINE, INC.

All nuts on this page can be used with bolts shown on facing page.

WING NUTS SWING NUTS FLANGE NUTS


FS-2000 FS-4000 FS-3000
Material: Specify manganese bronze, Material: Manganese bronze Material: Manganese bronze
stainless steel or steel
Overall Hub Hub Max. Across Overall Washer Max.
Overall Hub Hub Max. Part No. Wing Diam. Thickness Tap Part No. Flats Height Diameter Tap
Part No. Wing Diam. Thickness Tap Span (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)
Span (in.) (in.) (in.) (in.) FS-4010 4 1-1/4 7/8 5/8 FS-3010 1-1/4 1 1-1/2 3/4
FS-2000 3-1/4 1-1/16 5/8 3/8 FS-4020 5 1-3/8 7/8 3/4 FS-3020 1-5/8 1-1/4 2 7/8
FS-2010 3-3/4 1-1/8 3/4 5/8 FS-4030 6 1-1/2 1-1/4 7/8 FS-3030 2 2 2-1/2 1
FS-2020 4-3/4 1-5/16 3/4 5/8 FS-4040 7 1-3/4 1-1/8 1 FS-3040 2-3/8 2 2-5/8 1-1/4
FS-2030 5 1-1/16 5/8 1/2
FS-2040 5 1 7/8 1/2
FS-2050 5-1/2 1-3/8 3/4 7/8
FS-2060 7-1/2 1-1/2 1-1/8 7/8
FS-2070 10-1/2 2 1-3/4 1
FS-2080 12 2 1-3/4 1
FS-2090 7-3/4 1-7/8 1-1/2 1
FS-2100 9-1/4 2-3/4 1-5/8 1-1/4
BUTTERFLY NUTS BALL BASE HEX NUTS
FS-2110 7-1/2 2-3/4 1-1/2 1-1/4
FS-5000 FS-6000
Material: Specify brass or stainless steel Material: Specify brass or stainless steel
Tap Size (in.) Brass Stainless Steel Tap Size Stainless
Brass
1/4 FS-5010B FS-5010S (in.) Steel

5/16 FS-5020B FS-5020S 1/2 FS-6010B FS-6010S

3/8 FS-5030B FS-5030S 5/8 FS-6020B FS-6020S

1/2 FS-5040B FS-5040S 3/4 FS-6030B FS-6030S

5/8 FS-5050B FS-5050S 7/8 FS-6040B FS-6040S

3/4 FS-5060B — 1 FS-6050B FS-6050S

SPECIAL TYPE 7/8 FS-5070B —

RING NUTS
Material:
Manganese bronze
All nuts can be
tapped N.C. or
Acme thread

FS-1010 FS-1050 FS-1060 FS-1065 FS-1070 FS-1080 FS-1090


A – Inside Clearance (in.) 3-1/2 1-3/8 1-1/8 1-1/8 7/8 15/16 1/2
B – Hub Diameter (in.) 1-1/8 1-1/4 1-1/4 1 7/8 3/4 7/8
C – Hub Thickness (in.) 3/4 3/4 3/4 5/8 9/16 1/2 3/8
Max. Tap 3/4 3/4 5/8 5/8 3/8 3/8 3/8

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501 ALUMINUM
SAFETY
BFG MARINE, INC. GRATINGS
1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0516-03 5/3/06 9:49 AM Page 516

503-06

BFG MARINE, INC.


The bolts on this page can be used with nuts shown on facing page.

EYE BOLTS
EB-1000
Material: Manganese bronze
Thread: Specify N.C. or Acme
Diameter 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1”
2” EB-10B0250200 EB-10B0310200 EB-10B0370200 EB-10B0500200 — — — —
3” EB-10B0250300 EB-10B0310300 EB-10B0370300 EB-10B0500300 EB-10B0620300 — — —
L 4” EB-10B0250400 EB-10B0310400 EB-10B0370400 EB-10B0500400 EB-10B0620400 EB-10B0750400 — —
E 5” — — EB-10B0370500 EB-10B0500500 EB-10B0620500 EB-10B0750500 EB-10B0880500 EB-10B1000500
N 6” — — — EB-10B0500600 EB-10B0620600 EB-10B0750600 EB-10B0880600 EB-10B1000600
G 7” — — — — EB-10B0620700 EB-10B0750700 EB-10B0880700 EB-10B1000700
T 8” — — — — EB-10B0620800 EB-10B0750800 EB-10B0880800 EB-10B1000800
H 9” — — — — EB-10B0620900 EB-10B0750900 EB-10B0880900 —
10” — — — — — — EB-10B0881000 —
11” — — — — — — EB-10B0881100 —
12” — — — — — — EB-10B0881200 —
Steel or stainless steel available on special order.

WIRE HEAD OPEN EYE BOLTS


DROP BOLTS EB-2500
EB-2000
Material: Manganese bronze
Thread: Specify N.C. or Acme Material: Specify manganese bronze or steel
Part No. Bolt Dia. (in.) Bolt Length (in.) Thread: Specify N.C. or Acme
EB-20B0500400 1/2 4 Bolt Diameter: Specify 1/2”, 5/8” or 3/4”
EB-20B0500600 1/2 6
Bolt Length: Specify 6”, 7” or 8”
EB-20B0500750 1/2 7-1/2
EB-20B0500800 1/2 8
EB-20B0500900 1/2 9
EB-20B05001100 1/2 11
EB-20B0620600 5/8 6 TOGGLE PINS
EB-20B0620900 5/8 9 PN-1000
EB-20B0750600 3/4 6
EB-20B0750800 3/4 8
Steel or stainless steel available on special order.

Material:
Specify stainless steel, bronze, steel, galvanized steel, or Monel
Diameter:
Specify 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”
CLEVIS PINS Grip Length (“O”):
PN-3000 Specify 1”, 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4”, 4-1/2”, 5”, 5-1/2”,
6”, 6-1/2”, 7”, 7-1/2”, 8”, 8-1/2”, 9”, 9-1/2”, 10”, 10-1/2”, 11”
Material: Accessory (if needed):
Specify stainless steel, brass, steel, galvanized steel, or Monel Specify Pad Eye or Clip (specify length of chain or lanyard
Diameter: required.)
Specify 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”
Grip Length (“O”):
Specify 1”, 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4”, 4-1/2”, 5”, 5-1/2”, 6”
Pad Eye Clip

Tel: (631) 586-5500 PARTS FOR ULLAGE ASSEMBLIES


www.bfgmarine.com
Fax: (631) 586-5501
ULLAGE
BFG MARINE, INC. SCREENS
1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0517-03 5/3/06 9:50 AM Page 517

504-06

BFG MARINE, INC.


STRONG BACKS
Material: Specify manganese
bronze or aluminum

UL-3400
13” center to center

UL-3700
High clearance
Double clevis
14-1/2” center to center
UL-3300
Single clevis
13-1/4” center to center

SADDLE DOGS
DG-2600 DOUBLE END
5/8” x 5”
SAFETY HOOKS SCRAPERS
Acme threads TL-4200
Manganese bronze TC-6200 HOSE SADDLE
Manganese bronze
Manganese bronze (non-sparking) TC-4000
1-7/8” Wide blade
4-1/2” O. A. Aluminum
12” O. A. length
3/4” Eye For 2” hose
3/4” Opening

CORROSION RESISTANT “HAND LOCK” DECK COVER FLUSH MOUNTED


FOR CLEANING TANKS ON BARGES, TANKERS AND DEEP TANKS ON CARGO VESSELS.
ELIMINATES THE NEED FOR REPLACEMENT OF STUDS, WASHERS, GASKETS AND NUTS. ALSO
CAN BE USED TO VENTILATE THE TANKS, ELIMINATING THE NEED FOR VENTILATING GRATINGS.
Bronze construction – 316 SS Fingers – Buna N “O” Rings – Manganese Bronze “D” Handle

TC-1000
For 12-1/2” opening

Top side Front view Under side

POSITIVE LOCKING ACTION – COVER CAN ADJUST TO ANY DECK THICKNESS.


OPENS AND CLOSES WITHOUT THE NECESSITY OF A SPECIAL TOOL.
APPROVED BY AMERICAN BUREAU OF SHIPPING AND LLOYD’S REGISTER OF SHIPPING
ACCEPTED BY THE U.S. COAST GUARD

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501
INVERTED
BFG MARINE, INC. VENT CHECK VALVES
1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0518-03 5/3/06 9:50 AM Page 518

505-06

BFG MARINE, INC.

ADJUSTABLE EMERGENCY PIPE CLAMPS VAPOR RECOVERY SIGHT GLASS


EN-1000 TVG-II
3” wide band with Neoprene pad
Holds up to 200 psi
Pipe Size Range (in.)
Part No.
Min. Max.
EN-1000 2-1/2 14
EN-1016 16 20
EN-1021 21 24
EN-1026 26 31

SPARE PARTS BOXES Two view ports; light is allowed into the tank through one port
EN-5000 while viewing through the other. Glasses are flush with top
Material: Steel (16 ga.) surface. Single lever operates wiper to clean entire viewing area
of both glasses. Constructed of type 304 stainless steel with
A B C aluminum cover. Wiper assembly has 5/8” diameter bars.
Part No.
(in.) (in.) (in.)
Overall size is 15” x 5”.
EN-5010 12 10 10
EN-5020 14 8 8
EN-5030 18 12 6
EN-5040 18 12 12
RETAINING RINGS
EN-5050 18 15 9 PL-3000
EN-5060 22 14 12 Material: Bronze or aluminum
EN-5070 24 12 12 12 Threads per inch
EN-5080 24 15 15
EN-5090 30 18 12 Bronze Aluminum I.D. (in.) O.D. (in.)
EN-5100 30 14 14 PL-3100B PL-3100A 10 10-3/4
EN-5110 36 15 13 PL-3120B PL-3120A 12 12-3/4
EN-5120 36 15 15 PL-3140B PL-3140A 14 14-3/4
EN-5130 42 24 24 PL-3150B PL-3150A 15 15-3/4
PL-3160B PL-3160A 16 16-3/4
PL-3180B PL-3180A 18 18-3/4

CONDENSER & HEAT


EXCHANGER TUBE PLUGS
EN-4000
Materials: Specify Brass, FIXED LIGHTS
Laminated Fiber or Micarta
PL-2000
Part No. Tube O.D. (in.) Gauge Material: Bronze or aluminum
EN-4010 1/2 11 to 14
EN-4020 1/2 15 to 22
Clear Glass Flange
EN-4030 5/8 11 to 14 Bronze Aluminum
Dia. (in.) Thickness (in.) Dia. (in.)
EN-4040 5/8 15 to 22 PLB-2060 PLA-2060 6 1/2
EN-4050 3/4 11 to 14 PLB-2080 PLA-2080 8 1/2
EN-4060 3/4 15 to 22 PLB-2100 PLA-2100 10 1/2 13-1/2
EN-4070 7/8 11 to 14 PLB-2120 PLA-2120 12 5/8 15-1/4
EN-4080 7/8 15 to 22 PLB-2140 PLA-2140 14 3/4 18-1/4
EN-4090 1 11 to 14 PLB-2160 PLA-2160 16 3/4 20-5/8
EN-4100 1 15 to 22 PLB-2180 PLA-2180 18 3/4 22-5/8

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501
EXPANDABLE
BFG MARINE, INC. PLUGS
1 Saxwood Street, Deer Park, NY 11729-4779
Also see our Spread in the Index/Advertising Section
0506-04 5/3/06 9:51 AM Page 1

506-06

BFG MARINE, INC.

VALVE WHEEL WRENCHES “T” WRENCHES


A
TLA-2000 TL-6000
Material: Aluminum alloy Material: Plated steel
or stainless steel

3/4 SQ

Part No. Size (in.) Part No. Size (in.)


TLA-2080 8 TLA-2160 16 Plated Steel Stainless Steel A (in.) B (in.)
TLA-2100 10 TLA-2180 18 TL-6000 TL-6000S 10 6.19
TLA-2120 12 TLA-2240 24 TL-6010 TL-6010S 12 15.31
TLA-2140 14 TLA-2360 36 TL-6020 TL-6020S 20 12.31

SCUPPER STRAINERS SCUPPER CAPS


DK-2000 Material: Cast aluminum
With Steel Tension Spring Fits up to 6” opening
Material: Bronze
Part No. Size (in.) SC-4000 with “J” Bolt
DK-2030 3 Unit is provided with “J”
DK-2035 3-1/2
bolt attachment which
needs a bar across the
DK-2040 4
scupper opening
DK-2045 4-1/2
DK-2050 5 SC-4010 with
DK-2055 5-1/2 Spider Assembly
DK-2060 6 Specify opening

A
D

ALUMINUM DECK SOUNDING PLUGS


DK-4500
BLIND FLANGES Material: Aluminum or plastic
With Handle
E
DK-6400 B
Aluminum Plastic Pipe Size
DK-4515A DK-4515P 1-1/2
Flange Flange Diam. of Diam. of DK-4520A DK-4520P 2
Nominal No. of
Diameter Thickness Bolt Bolt Holes
Part No. Pipe Bolt DK-4525A DK-4525P 2-1/2
(in.) (in.) Circle (in.) (in.)
Size (in.) Holes DK-4530A DK-4530P 3
A B D E
DK-6404 4 9 3/4 7-1/2 3/4 8
DK-6405 5 10 3/4 8-1/2 3/4 8
DK-6406 6 11 3/4 9-1/2 3/4 8
DK-6408 8 13-1/2 7/8 11-3/4 3/4 8 PIPE STANCHIONS
Made to order. Please provide
DK-6410 10 16 1 14-1/4 3/4 12
detailed drawing.
DK-6412 12 19 1 17 3/4 12
DK-6414 14 21 1-1/8 18-3/4 7/8 12
DK-6416 16 23-1/2 1-1/8 21-1/4 7/8 16

DK-5300 DK-5000

Tel: (631) 586-5500


www.bfgmarine.com
Fax: (631) 586-5501

BFG MARINE, INC.


1 Saxwood Street, Deer Park, NY 11729-4779 MARINE
Also see our Spread in the Index/Advertising Section FASTENERS WATERTIGHT DOOR DOGS
505 5/3/06 9:53 AM Page 514

507-06

McNICHOLS COMPANY
HOW TO MEASURE
HOW TO ORDER/SPECIFY WIRE
CONSIDER:
1. Application or use of product (including environment) CLOTH
2. Physical requirements
A. opening size B. percent of open area
(send sample of cloth or screen now
being used if possible)
SPECIFY:
3. Quantity: number of pieces, rolls or screens required
1/2" opening 2 Mesh (count from
4. Material Type: e.g., Stainless Steel 304, Carbon Steel, etc. (clear space between wires) center to center of wires)
5. Width and Length
6. Wire Diameter: in decimals thousands of an inch
7. Wire Opening: provide mesh count per lineal inch or width of open- 1
To Compute Mesh: M= O+D
ing (clear opening between wires) in inches. Also state if square, rec-
tangular or other type of opening shape TOP
1-DM M
8. Construction: specify—welded or woven and type of weave VIEW
9. Special Fabrication: submit drawing for special requirements such To Compute Opening: O= M
as notching, boltholes, special shape, bending, forming, O
calendering etc.
10. Alternates: delivery may be improved if an acceptable substitute is
To Compute Open Area: A = (OM)2 x 100
permitted
M = Meshes per Lineal Inch D = Wire Diameter (in.) O = Width of Opening (in.) Wt. = Weight (lbs.) per 100 sq. ft. (Steel)

M D O Wt. M D O Wt. M D O Wt. M D O Wt. M D O Wt. M D O Wt.


.250 .7500 412.4 .250 .5000 562.3 .250 .3750 689.4 .105 .1172 333.7 .092 .1080 283.4 .092 .0747 352.8
.225 .7750 332.1 .225 .5250 451.0 .225 .4000 551.0 .092 .1302 263.9 .080 .1200 220.6 .080 .0867 259.1
.207 .7930 280.1 .207 .5430 379.4 .207 .4180 462.4 .080 .1422 195.9 .072 .1280 176.4 .072 .0947 216.9
3/4” Center to Center

5/8” Center to Center

.192 .8080 240.3 .192 .5580 324.8 .192 .4330 395.0 .072 .1502 157.0 .063 .1370 133.2 .063 .1037 163.0
1” Center to Center

.177
.162
.8230
.8380
203.7
170.2
.177 .5730 274.7 .177
.162
.4480
.4630
333.5
277.7
4-1/2 Mesh .063
.054
.1592
.1682
118.9
86.4
.054
.047
.1460
.1530
96.7
72.6
.054
.047
.1127
.1197
117.7
88.2
.162 .5880 229.2

6
.148 .8520 141.7 .148 .6020 190.5 .148 .4770 230.5 .047 .1752 65.0 .041 .1590 54.9 .041 .1257 66.5
.135 .8650 117.7 .135 .6150 158.1 .135 .4900 191.0 .041 .1812 49.2 .035 .1650 39.8 .035 .1317 48.1
.120 .8800 92.8 .120 .6300 124.4 .120 .5050 150.2 .035 .1872 35.7 .032 .1680 33.2 .032 .1347 40.0
.105 .8950 71.0 .105 .6450 95.0 .105 .5200 114.5 .032 .1902 29.8 .028 .1720 25.3 .028 .1387 30.5
.092 .9080 54.4 .092 .6580 72.8 .092 .5330 87.9 .025 .1750 20.2 .025 .1417 24.3
.080 .9200 41.1 .080 .6700 54.9 .080 .5450 66.1 .023 .1770 17.0 .023 .1437 20.5
.072 .9280 33.3 .072 .6780 44.5 .072 .5530 53.5 .020 .1467 15.5
.063 .9370 25.5 .063 .6870 34.0 .063 .5620 40.9
.054 .6960 24.9 .054 .5710 30.0 .063 .0799 184.7 .054 .0710 162.7 .054 .0571 177.4
.047 .5780 22.7 .054 .0889 139.7 .047 .0780 120.9 .047 .0641 138.2
.047 .0959 104.2 .041 .0840 90.6 .041 .0701 103.2
.250 .2500 894.6 .207 .2374 680.9 .192 .2080 654.4 .041 .1019 78.4 .035 .0900 65.1 .035 .0761 74.0
.225 .2750 710.6 .192 .2524 578.4 .177 .2230 548.2 .035 .1079 56.5 .032 .0930 54.1 .032 .0791 61.4
7

.032 .1109 47.0 .028 .0970 41.1 .028 .0831 46.6

9
.207 .2930 593.8 .177 .2674 485.7 .162 .2380 453.1
.192 .3080 505.5 .162 .2824 402.3 .148 .2520 373.7 .028 .1149 35.8 .025 .1000 32.6 .025 .0861 36.9
.177 .3230 425.4 .148 .2964 332.5 .135 .2650 307.8 .025 .1179 28.4 .023 .1020 27.5 .023 .0881 31.1
.162 .3380 353.3 .135 .3094 274.3 .120 .2800 240.6 .023 .1199 24.0 .020 .1050 20.7 .020 .0911 23.4
.148 .3520 292.4 .120 .3244 214.8 .105 .2950 182.4 .020 .1229 18.1 .018 .1070 16.8
.135 .3650 241.7 .105 .3394 163.2 .092 .3080 139.0 .018 .1249 14.6 .017 .1080 14.9
2 Mesh

2-1/2
2-1/4

.120 .3800 189.6 .092 .3524 124.5 .080 .3200 104.4


.105 .3950 144.2 .080 .3644 93.7 .072 .3280 84.3 .047 .0530 148.4 .041 .0423 136.7 .035 .0364 116.1
.092 .4080 110.2 .072 .3724 75.7 .063 .3370 64.3 .041 .0590 116.3 .035 .0483 102.1 .032 .0394 100.5
.080 .4200 83.0 .063 .3814 57.8 .054 .3460 47.1 .035 .0650 83.1 .032 .0513 84.3 .028 .0434 75.5
.072 .4280 67.1 .054 .3904 42.3 .047 .3530 35.6 .032 .0680 68.8 .028 .0553 63.5 .025 .0464 59.3
.063 .4370 51.2 .047 .3974 32.0 .041 .3590 27.0 .028 .0720 52.1 .025 .0583 50.1 .023 .0484 49.8
10

12

14

.054 .4460 37.6 .041 .4034 24.3 .025 .0750 41.2 .023 .0603 42.2 .020 .0514 37.2
.047 .4530 28.4 .023 .0770 34.7 .020 .0633 31.6 .018 .0534 29.9
.041 .4590 21.6 .020 .0800 26.1 .018 .0653 25.5 .017 .0544 26.6
.035 .4650 15.7 .016 .0554 23.5
.015 .0564 20.6
.014 .0574 17.9

.162 .1713 560.4 .135 .1507 429.0 .120 .1300 388.6 .028 .0345 83.6 .025 .0306 75.0 .025 .0250 85.0
.148 .1853 460.2 .120 .1657 349.9 .105 .1450 306.2 .025 .0375 68.9 .023 .0326 66.0 .023 .0270 70.8
.135 .1938 377.6 .105 .1807 263.2 .092 .1580 231.0 .023 .0395 57.7 .020 .0356 49.0 .020 .0300 55.2
.120 .2133 293.9 .092 .1937 199.3 .080 .1700 172.1 .020 .0425 43.0 .018 .0376 39.2 .018 .0320 44.1
.105 .2283 222.0 .080 .2057 148.9 .072 .1780 138.2 .018 .0445 34.5 .017 .0386 34.8 .017 .0330 39.1
.092 .2413 168.7 .072 .2137 119.8 .063 .1870 104.8 .017 .0455 30.7 .016 .0396 30.7 .016 .0340 34.4
.015 .0350 30.1
3-1/2

.080 .2533 126.4 .063 .2227 91.1 .054 .1960 76.4 .016 .0465 27.1 .015 .0406 26.8
16

20
18

.072 .2613 101.9 .054 .2317 66.5 .047 .2030 57.6 .015 .0475 23.7 .014 .0416 23.3 .014 .0360 26.1
4
3

.063 .2703 77.6 .047 .2387 50.2 .041 .2090 43.6 .014 .0485 20.6 .0135 .0421 21.6 .0135 .0365 24.2
.054 .2793 56.7 .041 .2447 38.1 .035 .2150 31.7 .0135 .0490 19.1 .013 .0426 20.0 .013 .0370 22.4
.047 .2863 42.8 .035 .2507 27.6 .032 .2180 26.4 .013 .0495 17.7 .012 .0436 17.0 .012 .0380 19.0
.041 .2923 32.5 .032 .2537 23.1 .028 .2220 20.2 .012 .0505 15.0 .011 .0446 14.2 .011 .0390 15.9
.035 .2983 23.7 .025 .2250 16.1 .011 .0515 12.6 .010 .0456 11.7 .010 .0400 13.1
.032 .3013 19.7 .010 .0525 10.4 .0095 .0460 10.5 .0095 .0405 11.8
.0095 .0530 9.4 .009 .0466 9.5 .009 .0410 10.5

Same Day Stock Shipment mcnichols.com E-mail: sales@mcnichols.com



Perforated Metal Grate-Lock® Grating Worldwide Service


Catwalks ●
Matting ISO

Grip Strut® Grating Fiberglass Grating ●

1-800-237-3820
Perf-O Grip® Grating ●

PlastiPerf™ ●
Stair Treads 9001:2000

Wire Cloth
Traction Tread™ Grating Fast Fax: 1-813-243-1888
● ●
Aluminum Plank ●
Floor Plate Certified

Expanded Metal

Bar Grating Handrail Components ●
McNICHOLS CO. Custom Fabrication: Sawing, Shearing, Welding
506 5/3/06 9:54 AM Page 1

508-06

McNICHOLS COMPANY
FORMULAS FOR DETERMINING
EXPANDED METAL PERCENTAGE OF OPEN AREA AND
HOLES PER SQUARE INCH
Design Terminology
Standard Flattened ROUND PERFORATIONS STAGGERED

BOND Centers=C
SWD

SWO LWO
rs
nte
AND WID Ce
STRTHICKNESS (GTAH C=
ND UG
RA E)
ST LWD
Open Area Formula
Bond Shearing
CONSTRUCTION: Expanded Diamonds D2 x 90.69 = %
Shearing cuts through where two strands C2
STYLES: Standard or Flattened intersect. Eliminates prongs or jagged edges.
Catwalk Holes per Square Inch
Material is cut on or near center line of bond.
Grating
Stair Treads
Check with manufacturer for bond shearing H.P.S.I. = % Open Area
over 48". 78.54 x D2
Steel U-Edging
Tolerances ROUND PERFORATIONS
MATERIAL: Carbon Steel LWD or SWD ±1/2" design size (special bond STRAIGHT LINE PATTERN
HD Galvanized Steel tolerances on meshes 1/4" and smaller)
Aluminum Centers=C
Stainless Type 304 Random Shearing
Stainless Type 316 Random Sheared—this type of shearing to
SIZES: Specify size desired tolerance generally leaves jagged edges/
prongs and/or incomplete design patterns.
Tolerances
HOW TO ORDER/SPECIFY LWD or SWD ±1/16" on standard and
Open Area Formula
CONSIDER: flattened expanded ±1/4" on grating and
1. Application or use of product. catwalk D2 x 78.54 = %
2. Physical requirements C2
A. percent of open area B. environment Holes per Square Inch
C. loading
SPECIFY: PERFORATED METAL H.P.S.I. = % Open Area
78.54 x D2
1. Material: carbon steel, aluminum, stainless
steel 316 or 304, etc. HOW TO ORDER/SPECIFY
2. Item No.: typically expanded metal or grating is CONSIDER:
specified below 1. Application or use of product
Examples: 2. Physical requirements (open area, strength, etc.)
1/2" #18F 4' SWD x 8' LWD SPECIFY:
Carbon Steel 3. Quantity: number of cut pieces or full sheets
● 1/2" = short way of diamond dimension
4. Material: type of material desired - carbon steel, stainless
● #18 = gauge steel, aluminum, etc.
● “F” = flattened (“S” would indicate standard) 5. Thickness: for steel or stainless steel specify gauge or 1/16” Dia. 1/8” Stg. Ctrs. 5/64” Dia. 7/64” Stg. Ctrs.
● 4' SWD x 8' LWD = size of sheet width x thickness in inches. All other metals specify in inches only. 74 Holes PSI 22.5% O/A 97 Holes PSI 46% O/A
length 6. Width: overall width
● Carbon Steel = material 7. Length: overall length
4.0# Catwalk 10' SWD x 2' LWD 8. Perforation Size, Shape and Arrangement: Staggered
Carbon Steel arrangement (60° pattern) is standard (for screens—
● 4.0# = wt/ per sq. foot of catwalk or grating
normally staggered in direction of flow of material).
Straight line or other pattern must be specified; slotted
● 10' SWD x 2' LWD = size of sheet width x
perforations must be noted as parallel to length or width.
length 9. Hole or Bar Centers: (metal between perforations) Center
● Carbon Steel = material
to center measures width of bar at point where perforations
3. Quantity: number of pieces - full size or cut are closest. .117” Dia. 5/32” Stg. Ctrs. 1/8” Dia. 3/16” Stg. Ctrs.
10. Blank Margins: dimensions of blank margins, parallel width 51% O/A 33 Holes PSI 40% O/A
pieces required.
and length (+ or - tolerance). Cost increases when blank
4. Shearing: bond or random
margins are required.
5. Finish: hot-dip galvanized, special, if any 11. Flatness: requirements for flatness.
6. Special Fabrication: circle shearing, cut outs, 12. End Pattern: “finished” or “unfinished end pattern” if
etc., if any available.
7. Accessories: U-Edging (state part no.) 13. Special Requirements: special shearing, leveling, finish or
Stair Tread (state style and size) heat treating if any

3/16” Dia. 1/4” Stg. Ctrs. 3/16” Dia. 5/16” Stg. Ctrs.
18 Holes PSI 50% O/A 33% O/A

Same Day Stock Shipment mcnichols.com E-mail: sales@mcnichols.com



Perforated Metal Grate-Lock® Grating

Worldwide Service ●
Catwalks ●
Matting ISO

Grip Strut® Grating Fiberglass Grating

1-800-237-3820
Perf-O Grip® Grating


PlastiPerf™ ●
Stair Treads 9001:2000

Wire Cloth
Traction Tread™ Grating
● Fast Fax: 1-813-243-1888 ●
Aluminum Plank ●
Floor Plate Certified

Expanded Metal

Bar Grating Handrail

Components McNICHOLS CO. Custom Fabrication: Sawing, Shearing, Welding
0509-04 5/3/06 9:55 AM Page 1

509-06

ROBINSON TECH INTERNATIONAL CORPORATION

CUP BRUSHES - Crimped wire


D T d Art. No. Art. No. Art. No. Art. No. Art. No. RPM
(in.) (in.) (in.) (S 0.007”) (S 0.0118”) (BS 0.0118”) (B 0.007”) (SS 0.0118”) Max.
2-3/8 5/8 0106016120 0106016130 0106106230 0106016320 0106016430 11000
3 5/8 0107558120 0107558130 0107558230 0107558320 0107558430 9000
4 5/8 0110058120 0110058130 0110058230 0110058320 0110058430 8500
4 7/8 0110022120 0110022130 0110022230 0110022320 0110022430 8500
5 5/8 0112558120 0112558130 0112558230 0112558320 0112558430 6500
5 7/8 0112522120 0112522130 0112522230 0112522320 0112522430 6500
6 5/8 0115058120 0115058130 0115058230 0115058320 0115058430 6500
6 7/8 0115022120 0115022130 0115022230 0115022320 0115022430 6500

Fill types:
S Steel wire, natural hard, crimped B Brass wire, crimped
SS Stainless steel wire, acid resistant, crimped BS Brass plated steel wire, crimped

BEVEL BRUSHES - Crimped wire


D L T Art. No. Art. No. Art. No. Art. No. Art. No. RPM
(in.) (in.) (in.) (S 0.007”) (S 0.0118”) (BS 0.0118”) (B 0.007”) (SS 0.0118”) Max.
4 3/4 5/8 0210058120 0210058130 0210058230 0210058320 0210058430 12000
4-5/8 1-1/16 5/8 0211558120 0211558130 0211558230 0211558320 02115583430 12000

Fill types:
S Steel wire, natural hard, crimped B Brass wire, crimped
SS Stainless steel wire, acid resistant, crimped BS Brass plated steel wire, crimped

CUP BRUSHES - Twisted wire BOWL CUP BRUSHES - Twisted wire


D L T d Art. No. Art. No. RPM D L T d Art. No. Art. No. RPM
(in.) (in.) (in.) (in.) (S-T 0.014”) (S-T 0.020”) Max. (in.) (in.) (in.) (in.) (S-T 0.014”) (S-T 0.020”) Max.
3-1/8 1 7/8 1108022135 1108022150 8500 2-1/2 3/4 5/8 2106516135 2106516150 12000
3-1/8 1 5/8 1108058135 1108058150 8500 2-1/2 3/4 5/8 2106558135 2106558150 12000
3-1/2 1 7/8 1109022135 1109022150 8500 3 1 7/8 2108022135 2108022150 8500
3-1/2 1 5/8 1109058135 1109058150 8500 3 1 5/8 2108058135 2108058150 8500
4 1 7/8 1110022135 1110022150 8500 4 1 7/8 2110022135 2110022150 8500
4 1 5/8 1110058135 1110058150 8500 4 1 5/8 2110058135 2110058150 8500
4-3/4 1 7/8 1112022135 1112022150 8500 4-3/4 1 7/8 2112022135 2112022150 8500
4-3/4 1 5/8 1112058135 1112058150 8500 4-3/4 1 5/8 2112058135 2112058150 8500

Fill types: Fill types:


S-T Steel wire, hardened, straight S-T Steel wire, hardened,straight

Robinson Tech International Corporation


Telephone: 115 River Rd., P.O. Box 38, Edgewater, NJ 07020 Fax:
(201) 941-3232 E-mail: sales@RTICorporation.com (201) 313-7072

Products of other sizes, metric or inch, available on request. Please contact us for details.
0510-04 5/3/06 9:56 AM Page 1

510-06

ROBINSON TECH INTERNATIONAL CORPORATION

CIRCULAR BRUSHES - Crimped wire


D B L d Art. No. Art. No. Art. No. RPM
(in.) (in.) (in.) (in.) (S 0.007”) (S 0.012”) (BS 0.012”) Max.
2-3/8 5/8 3/8 3/4 0306020120 0306020130 0306020230 15000
3-1/8 5/8 7/8 3/4 0308020120 0308020130 0308020230 10000
4 7/8 5/8 1-3/16 0310030120 0310030130 0310030230 6000
5 1 1-1/4 1-3/16 0312530120 0312530130 0312530230 6000
6 1 1-1/8 2 0315050120 0315050130 0315050230 6000
7 1 1 2 0317550120 0317550130 0317550230 6000
8 1 1-5/8 2 0320050120 0320050130 0320050230 4500
10 1 1-7/8 2 0325050120 0325050130 0325050230 3600
12 1-1/4 2 2 0330050120 0330050130 0330050230 3000
Fill types:
S Steel wire, natural hard, crimped
BS Brass plated steel wire, crimped

With adapter

PLASTIC ADAPTERS
For Brush Dia. D From Bore d Reduced to Bore d
(in.) (in.) ( in.)
2-3/8 to 5 3/4 1/2 5/8
6 to 12 1-1/4 1/2 5/8 3/4 7/8 1

SINGLE SECTION BRUSHES – Twisted wire


With bore
D B L d No. of Art. No. Art. No. RPM
(in.) (in.) (in.) (in.) Knots (S-T 0.014”) (S-T 0.020”) Max.
3 3/8 5/8 1/2 15 1307513135 1307513150 10000
4 3/8 7/8 7/8 18 1310022135 1310033150 11000
4-5/8 3/8 7/8 7/8 20 1311522135 1311522150 11000
6 1/2 1-1/4 7/8 24 1315022135 1315022150 9000
7 5/8 1-3/4 7/8 28 1317822135 1317822150 9000
S-T Steel wire, hardened, straight

With thread
D B L T No. of Art. No. Art. No. RPM
(in.) (in.) (in.) (in.) Knots (S-T 0.014”) (S-T 0.020”) Max.
4 3/8 7/8 5/8-11 32 1310058135 1310058150 11000
6 1/2 1-1/4 5/8-11 56 1315058135 1315058150 9000
S-T Steel wire, hardened, straight

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0511-04 5/3/06 9:57 AM Page 1

511-06

ROBINSON TECH INTERNATIONAL CORPORATION


ABRASIVE BRUSHES
CIRCULAR BRUSHES
Dimensions Fill Type
D d Art. No. Art. No. Art. No. RPM
in. mm in. mm (A 0.55/320) (A 0.90/180) (A 1.00/120) Max
3 75 3/8 9 6307510555 6307510590 63075105100 4500
4 100 3/8 9 6310010555 6310010590 63100105100 4500
5 125 3/8 9 6312506555 6312506590 63125065100 3750
6 150 3/8 9 6315006555 6315006590 63150065100 3750

SHAFT-MOUNTED CIRCULAR BRUSHES


Dimensions Fill Type
D s Art. No. Art. No. Art. No. RPM
in. mm in. mm (A 0.55/320) (A 0.90/180) (A 1.00/120) Max.
1-1/2 38 1/4 6 6303806555 6303806590 63038065100 4500
2 50 1/4 6 6305006555 6305006590 63050065100 4500
2-1/2 63 1/4 6 6306306555 6306306590 63063065100 4500
3 75 1/4 6 6307506555 6307506590 63075065100 4500
4 100 1/4 6 6310006555 6310006590 63100065100 4500

STRIP FLAP BRUSHES


Dimensions Fill Type
D s Art. No. Art. No. Art. No. RPM
in. mm in. mm (A 0.55/320) (A 0.90/180) (A 1.00/120) Max.
4 100 1/4 6 0510006555 0510006590 05100065100 3500
Fill types:
A Abrasive filaments,
silicon carbide, crimped,
grit sizes 320-120

SHAFT-MOUNTED CUP BRUSHES


Dimensions Fill Type
D s Art. No. Art. No. Art. No. RPM
in. mm in. mm (A 0.55/320) (A 0.90/180) (A 1.00/120) Max.
2 50 1/4 6 4105006555 4105006590 41050065100 4500
2-1/2 63 1/4 6 4106306555 4106306590 41063065100 4500
3 75 1/4 6 4107506555 4107506590 41075065100 4500

SHAFT-MOUNTED END BRUSHES


Dimensions Fill Type
D d1 s L L1 Art. No. Art. No. Art. No. RPM
in. mm in. mm in. mm in. mm in. mm (A 0.55/320) (A 0.90/180) (A 1.00/120) Max.
1/2 12 3/8 10 1/4 6 3/4 20 2-3/8 60 3401206555 3401206590 34012065100 20000
3/4 17 5/8 15 1/4 6 7/8 22 2-9/16 65 3401706555 3401706590 34017065100 18000
1 24 7/8 22 1/4 6 1 25 2-5/8 68 3402406555 3402406590 34024065100 18000
1-1/4 30 1-1/8 28 1/4 6 1-1/64 26 2-5/8 68 3403006555 3403006590 34030065100 15000

Robinson Tech International Corporation


Telephone: 115 River Rd., P.O. Box 38, Edgewater, NJ 07020 Fax:
(201) 941-3232 E-mail: sales@RTICorporation.com (201) 313-7072
Products of other sizes, metric or inch, available on request. Please contact us for details.
Robinson 3005 5/3/06 9:58 AM Page 1

512-06

ROBINSON TECH INTERNATIONAL CORPORATION

Cut-Off Wheels Type 41


For Metal For Masonry Wheel Size (DxTxH) Max. Speed
• High quality abrasives and bonding Part # Part # inch mm RPM
agents are used 41A0751695 41C0751695 3 x 1/16 x 3/8 75 x 1.6 x 9.5 20000
41A1003095 41C1003095 4 x 1/8 x 3/8 75 x 3 x 9.5 15200
• Reinforced by special fabrics
41A1003016 41C1003016 4 x 1/8 x 5/8 100 x 3 x 16 15200
• High in tensile, shock and bending strengths
41A1001660 41C1001660 4 x 1/16 x 1/4 100 x 1.6 x 6 15200
• For use in metal or nonmetal cutting 41A1001695 41C1001695 4 x 1/16 x 3/8 100 x 1.6 x 9.5 15200
41A1001616 41C1001616 4 x 1/16 x 5/8 100 x 1.6 x 16 15200
41A1001016 41C1001016 4 x 3/64 x 5/8 100 x 1 x 16 15200
41A1002016 41C1002016 4 x 1/12 x 5/8 100 x 2 x 16 15200
41A1151022 41C1151022 4-1/2 x 3/64 x 7/8 115 x 1 x 22 13300
41A1153022 41C1153022 4-1/2 x 1/8 x 7/8 115 x 3 x 22 13300
41A1151622 41C1151622 4-1/2 x 1/16 x 7/8 115 x 1.6 x 22 13300
41A1251022 41C1251022 5 x 3/64 x 7/8 125 x 1 x 22 12200
41A1253022 41C1253022 5 x 1/8 x 7/8 125 x 3 x 22 12200
41A1501622 41C1501622 6 x 1/16 x 7/8 150 x 1.6 x 22 10200
41A1503022 41C1503022 6 x 1/8 x 7/8 150 x 3 x 22 10200
41A1803016 41C1803016 7 x 1/8 x 5/8 180 x 3 x 16 8500
41A1803022 41C1803022 7 x 1/8 x 7/8 180 x 3 x 22 8500
D T
41A2303022 41C2303022 9 x 1/8 x 7/8 230 x 3 x 22 6600
41A2502416 41C2502416 10 x 3/32 x 5/8 250 x 2.4 x 16 6100
H 41A30524254 41C30524254 12 x 3/32 x 1 305 x 2.4 x 25.4 5100
41A30530254 41C30530254 12 x 1/8 x 1 305 x 3 x 25.4 5100
41A3053020 41C3053020 12 x 1/8 x 20mm 305 x 3 x 20 5100
41A35530254 41C35530254 14 x 1/8 x 1 355 x 3 x 25.4 4400
41A35524254 41C35524254 14 x 3/32 x 1 355 x 2.4 x 25.4 4400

Type 42 Depressed Center


For Metal For Masonry Wheel Size (DxTxH) Max. Speed
Part # Part # inch mm RPM
42A1003095 42C1003095 4 x 1/8 x 3/8 100 x 3 x 9.5 15300
42A1003016 42C1003016 4 x 1/8 x 5/8 100 x 3 x 16 15300
42A1153022 42C1153022 4-1/2 x 1/8 x 7/8 115 x 3 x 22 13300
42A1152022 42C1152022 4-1/2 x 1/12 x 7/8 115 x 2 x 22 13300
42A1253022 42C1253022 5 x 1/8 x 7/8 125 x 3 x 22 12200
42A1251622 42C1251622 5 x 1/12 x 7/8 125 x 1.6 x 22 12200
42A1503022 42C1503022 6 x 1/8 x 7/8 150 x 3 x 22 10200
42A1803022 42C1803022 7 x 1/8 x 7/8 180 x 3 x 22 8500
D T 42A1802022 42C1802022 7 x 1/12 x 7/8 180 x 2 x 22 8500
42A2303022 42C2303022 9 x 1/8 x 7/8 230 x 3 x 22 6600
H 42A2302022 42C2302022 9 x 1/12 x 7/8 230 x 2 x 22 6600

Products of other Robinson Tech International Corporation


sizes, metric or inch, 115 River Rd., P.O. Box 38, Edgewater, NJ 07020 Visit Our Website:
available on request. E-mail: sales@RTICorporation.com www.JLonghardware.com
Please contact us
for details. Tel: (201) 941-3232 • Fax: (201) 313-7072
3006 5/3/06 9:59 AM Page 1

513-06

ROBINSON TECH INTERNATIONAL CORPORATION

Stainless Steel Cut-Off Wheels Type 41


Part Wheel Size (DxTxH) Max. Speed
• Special reinforced Number inch mm RPM
resinoid bonding system 41SA751095 3 x 3/64 x 3/8 75 x 1.0 x 9.5 20000
41SA751695 3 x 1/16 x 3/8 75 x 1.6 x 9.5 20000
• Thin profile for fast, 41SA1001016 4 x 3/64 x 5/8 100 x 1.0 x 16 15200
cool cutting with 41SA1001616 4 x 1/16 x 5/8 100 x 1.6 x 16 15200
smaller exit bur 41SA1151022 4-1/2” x 3/64” x 7/8” 115 x 1.0 x 22 13300
41SA1151622 4-1/2” x 1/16” x 7/8” 115 x 1.6 x 22 13300
• For use in cutting 41SA1251022 5” x 3/64” x 7/8” 125 x 1.0 x 22 12200
stainless steel pipe, 41SA1251622 5” x 1/16” x 7/8” 125 x 1.6 x 22 12200
tubing, rod, and sheet 41SA1501022 6” x 3/64” x 7/8” 150 x 1.0 x 22 10200
41SA1501622 6” x 1/16” x 7/8” 150 x 1.6 x 22 10200
D 41SA1801622 7” x 1/16” x 7/8” 180 x 1.6 x 22 8500
41SA1802022 7” x 1/12” x 7/8” 180 x 2.0 x 22 8500
T 41SA2302022 9” x 1/12” x 7/8” 230 x 2.0 x 22 6600
H

Super-Thin Cut-Off Wheels


Part Wheel Size (DxTxH)
• Highly flexible and Number inch mm
resilient CBP210620 5/6 x 1/40 x 1/13 21 x 0.6 x 2
CBP220520 7/8 x 1/50 x 1/13 22 x 0.5 x 2
• Produce a fast, clean cut CBP221518 7/8 x 1/17 x 1/14 22 x 1.5 x 1.8
on all ferrous metals CBP2380615 15 /16 x 1/40 x 1/17 23.8 x 0.6 x 1.5
CBP321220 1-1/4 x 1/21 x 7/80 32 x 1.2 x 2
• Suitable for hand held or CBP320820 1-1/4 x 1/31 x 1/13 32 x 0.8 x 2
stationary tools CBP401518 1-9/16 x 1/17 x 1/14 40 x 1.5 x 1.8
D
T
H

Type 27
For Metal For Masonry Wheel Size (DxTxH) Max. Speed
Part# Part# inch mm RPM
Grinding Wheels 27A1006095 27C1006095 4 x 1/4 x 3/8 100 x 6 x 9.5 15300
27A1006016 27C1006016 4 x 1/4 x 5/8 100 x 6 x 16 15300
• Quality abrasives 27A1003016 27C1003016 4 x 1/8 x 5/8 100 x 3 x 16 15300
and resin bonds 27A1156022 27C1156022 4-1/2 x 1/4 x 7/8 115 x 6 x 22 13300
27A1153022 27C1153022 4-1/2 x 1/8 x 7/8 115 x 3 x 22 13300
27A1256022 27C1256022 5 x 1/4 x 7/8 125 x 6 x 22 12200
• Grid pattern rapidly
27A1506022 27C1506022 6 x 1/4 x 7/8 150 x 6 x 22 10200
removes material 27A1806022 27C1806022 7 x 1/4 x 7/8 180 x 6 x 22 8500
27A2306022 27C2306022 9 x 1/4 x 7/8 230 x 6 x 22 6600
• Cool grinding
characteristics Type 27 with hub
D Wheel Size (DxTxH) Max. Speed
• Good surface finishes Part # Application inch mm RPM
and consistent quality T W/H11560 metal & mason 4-1/2 x 1/4 x 5/8-11 115 x 6 x 16 13330
H W/H12560 metal & mason 5 x 1/4 x 5/8-11 125 x 6 x 16 12200
W/H15060 metal & mason 6 x 1/4 x 5/8-11 150 x 6 x 22 10200
• Reinforced for prolonged W/H18060 metal & mason 7 x 1/4 x 5/8-11 180 x 6 x 16 8500
performance W/H23060 metal & mason 9 x 1/4 x 5/8-11 230 x 6 x 16 6600

Products of other Robinson Tech International Corporation


sizes, metric or inch, 115 River Rd., P.O. Box 38, Edgewater, NJ 07020
available on request. Visit Our Website:
E-mail: sales@RTICorporation.com www.JLonghardware.com
Please contact us
for details. Tel: (201) 941-3232 • Fax: (201) 313-7072
0514-04 5/3/06 10:00 AM Page 1

514-06

Sandpaper Sheets & Accessories


001K Emery 411Q, 413Q and 210N, 230N,
and Crocus 431Q Wet or Dry 240N and 346U
Cloth Sheets Sandpaper Sheets Dry Sandpaper Sheets
Emery Cloth for light Use wet or dry for sanding Dry sanding only by machine or
metal sanding. Primarily a polishing agent but old finishes, fine featheredging plus surface work. hand on fiberglass, wood or metal. Open coat with
also used for removing rust and corrosion from It is a silicon carbide, closed coat product tough aluminum oxide mineral.
metal surfaces. bonded with a waterproof resin. Product Sheets Sleeves
Sheets Sleeves Product Sheets Sleeves Part Number I.D. Grade Per Sleeve Per Case
Part Number Grade Per Sleeve Per Case Part Number I.D. Grade Per Sleeve Per Case 9" x 11" A Weight
9" x 11" 9" x 11" A Weight 051144-02103 210N 220A 100 10
051144-02431 Fine 50 5 051144-02000 411Q 600A 50 10 051144-02104 210N 180A 100 10
051144-02432 Medium 50 5 051144-02001 411Q 500A 50 5 051144-02106 210N 120A 100 10
051144-02433 Coarse 50 5 051144-02002 413Q 400A 50 10 051144-02107 210N 100A 100 10
051144-02435 Crocus 50 5 051144-02003 413Q 360A 50 5 051144-02108 210N 80A 100 10
051144-02004 413Q 320A 50 10 9" x 11" C&D Weight
051144-02005 413Q 280A 50 5 051144-02112 230N 150C 100 10
252U Green Resin 051144-02006 413Q 240A 50 5 051144-02113 230N 120C 100 10
Bond Dry 051144-02007 413Q 220A 50 10 051144-02114 230N 100C 100 10
2-3/4" x 17-1/2" C Weight 051144-02115 240N 80D 50 10
Sandpaper Sheets 051144-02088 431Q 180C 100 10 051144-02116 240N 60D 50 10
Dry sanding only with hand 9" x 11" C Weight 051144-02117 240N 50D 50 10
or air file. Special mineral coating plus improved 051144-10695 431Q 400C 50 10 051144-02118 346U 40D 50 5
mineral bond means long-lasting, fast-cutting 051144-10697 431Q 320C 50 10 051144-02119 346U 36D 50 5
abrasive life. Excellent for rough sanding, shaping 051144-10699 431Q 240C 50 10 2-3/4" x 17-1/2" C&D Weight
and fairing of hulls. 051144-02014 431Q 180C 50 5 051144-02133* 230N 120C 200 10
051144-02015 431Q 150C 50 5 051144-02134 230N 100C 200 10
Sheets Boxes 051144-02016 431Q 120C 50 5 051144-02135 240N 80D 100 10
Part Number Grade Per Box Per Case 051144-02136 240N 60D 100 10
051144-02017 431Q 100C 50 5
3-2/3" x 9" E Weight 051144-02138 346U 40D 100 5
051144-02018 431Q 80C 50 5
051131-02226 40E 100 10 051144-02139 346U 36D 100 5
051144-02019 431Q 60C 50 5
051131-02227 36E 100 10
2-3/4" x 17-1/2" E Weight Part Number Product I.D. Grade Packs Per Case
051144-02221 40E 100 5 9" x 11" C & D Weight - 5 Sheets Per Pack
051144-02222 36E 100 5 051131-32112 230N 150C 10

Sheets Packs 481W and 483W 051131-32113


051131-32114
240D
230N
120C
100C
10
10
Part Number Grade
2-3/4" x 17-1/2" E Weight
Per Pack Per Case
Wet or Dry Cloth 051131-32115 240N 80D 10

051131-32221 40E 5 10 Silicon Carbide Sheets 051131-32116


051131-32118
240N
346U
60D
40D
10
10
051131-32222 36E 5 10 A waterproof open coat mesh cloth that permits 051131-32119 346U 36D 10
easy cleaning of sanding residue for improved
Wet or Dry cutting efficiency. Used to the best advantage
where filling or loading is a problem.
Sponge Pad Product Sheets Per Sheets
A firm hand sanding pad to be Part Number I.D. Grade Min. Pkg. Per Case
used with a three-fold wrap of 9" x 11" 245N Dry
wet or dry sandpaper sheets or 051144-10290 481W 320 25 250
gold dry sandpaper sheets. 051144-10455 481W 220 25 250 Sandpaper Sheets
051144-10456 483W 180 25 250 Dry sanding only. Specially
Part Number Pads Per Box Quantity Per Case
051144-10457 483W 150 25 250 treated open coat paper with
051131-05526 5 50
051144-10458 483W 120 25 250 aluminum oxide mineral resists loading
051144-10459 483W 100 25 250 when sanding on fiberglass, metal or wood.
Rubber Sanding 051144-10460 483W 80 25 250
Sheets Sleeves
Block ding
Part Number
4-1/2" x 11" D Weight
Grade Per Sleeve Per Case
3M San
For use with wet or dry and dry Block
051144-02338 80D 100 10
9" x11" sanding sheets for block 05519
0552
0

9" x 11" D Weight


sanding. Block is pliable for mild 051144-02393 80D 50 10
contours and designed to hold 051144-02394 60D 50 10
sandpaper sheets securely during 3-2/3" x 9" D Weight
wet or dry sanding operations. It 051144-02397 80D 200 10
utilizes a 9" x 11" sheet, torn or folded into thirds to 2-3/4" x 17-1/2" D Weight
make 3" x 11" sheets. 051144-02400 80D 100 10
Part Number Sheet Size Blocks Per Case
051131-05520 3" x 11" 10

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0515-04 5/3/06 10:01 AM Page 527

515-06

Abrasive Belts Hand Pads, Discs, and Accessories


Purple Portable Surface Disc Pad Assembly
Sanding Belts Conditioning Discs Comes complete with a 2" steel
Quick disc-fastening system shaft and adaptor. The hard
P graded construction which
allows for easy disc centering. Used in rubber back-up pad provides firm
provides increased cut rate, more uniform finish,
conjunction with disc pad assemblies, 05539 support for surface conditioning
higher stock removal with less heat and loading,
(for 2"), 05540 (for 3") and 05541 (for 4"). The coarse discs and bristle discs.
and long life for wood sanding. Belts feature a
butt-splice which allows for unidirectional sanding. grade (brown) equates with a coated abrasive grit
of 80 to 100, medium (maroon) 100 to 120 grit, very Quantity
Part Number Grade Belts Per Box Belts Per Case fine (blue) 220 to 320, super fine (gray) 320-600. Part Number Size Hardness Per Case
3" x 18" Requires use of the holder (PN 07500). 051144-45102 1/4" Threaded Shaft 1
051144-81393 50Y 5 25 051144-45101 1" Medium 5
051144-81394 60Y 5 25 Part Quantity Boxes 051144-05539 2" Medium 10
051144-81395 80Y 5 25 Number Size & Grade Per Box Per Case 051144-05540 3" Medium 10
051144-81396 P100Y 5 25 051131-07480 2" Coarse 25 4
051144-81397 P120Y 5 25
051144-81398 P150Y 5 25
051131-07481 2" Medium 25 4 Rivet Cleaning Disc
051131-07515 2" Very Fine 25 4 Constructed of a three
3" x 21" –
Fits Skil no’s. 594, 595; Porter Cable no’s. 136,153; 051131-07516 2" Super Fine 25 4 dimensional, non-woven
Miller Falls no. 830, Wards no. 8533; Stanley no. H493; 051131-07482 4" Coarse 10 10 material. Designed to sand and
Rockwell no’s. 90, 91, 236 and 237. 051131-07483 4" Medium 10 10 clean around rivets. Aggressive
051144-81399 50Y 5 25 051131-07511 4" Very Fine 10 10 yet highly conformable. Discs are used in
051144-81400 60Y 5 25 conjunction with holder (PN 07500).
051131-07512 4" Super Fine 10 10
051144-81401 80Y 5 25
051131-07485 3" Coarse 25 4 Part Number Size Quantity Per Case
051144-81402 P100Y 5 25
051131-07410 4" x 1-1/4" 10
051144-81403 P120Y 5 25 051131-07486 3" Medium 25 4
051144-81404 P150Y 5 25 051131-07513 3" Very Fine 25 4
3" x 24" – 051131-07514 3" Super Fine 25 4 Holder for
Fits Black & Decker no’s. U-144, U-244, U-346, 454, 470,
471, 654, 670, 671, 7450, 7460; Mail no’s. 30, 31; Porter Rivet Cleaning Disc
Cable no’s. A3, B3, G3, T3, T33, 360; Stanley no. H-31 A durable plastic holder for use
051144-81410 50Y 5 25 with molding, adhesive and stripe
051144-81411 60Y 5 25 removal disc and rivet cleaning disc. 1/4" steel
051144-81412 80Y 5 25 shank allows easy use to portable tools.
051144-81413 P100Y 5 25 Bristle Discs Part Number Size Billing Unit Per Case
051144-81414 P120Y 5 25 A molded abrasive bristle 051131-07500 1" Dia. x 1/4" Shank 1
051144-81415 P150Y 5 25 product designed to conform
4" x 24" –
Fits Porter Cable no. 564, Sears no. 2239;
to the workpiece in numerous Large Area Stripe
surface conditioning
Stanley nos. 494, 496, 497
applications. Uses quick “half
Removal (LASR)
051144-81429
051144-81430
50Y
60Y
5
5
25
25
turn on, half turn off” fastening system. Works well Disc Assembly
in applications where loading is a problem, Molding, adhesive and stripe
051144-81431 80Y 5 25 replacing wire brushes, surface conditioning discs,
051144-81432 P100Y 5 25 removal disc. The LASR disc
and coated abrasive discs. The bristle design and assembly quickly removes
051144-81433 P120Y 5 25 three-dimensional abrasive enable the bristle disc
051144-81434 P150Y 5 25 vinyl stripes and graphics and their adhesive
to remove coatings, sealant, and adhesives, leaving without damaging gelcoat or marine paint.
a clean surface ready for subsequent operations. Assembly is designed to be used with a variable
Hand Pads The high Maximum Operating Speed (MOS) of the speed buffer, with a
bristle disc makes it compatible with right-angle 1500-3000 RPM speed range. Use with adaptor
die grinders. Use in conjunction with the disc pad
General Purpose assembly shown below. (1" MOS = 30,000 RPM,
(PN07519).
Part Number Size Quantity Per Case
Pad – Maroon 2" MOS = 25,000 RPM, 3" MOS = 18,000 RPM).
051131-07517 8" dia. x 5/8" 1
Requires use of holder (PN 07500).
For scuffing before applying paint
and paint primers. Also may be used
in cleaning upholstery and chrome.
Discs Discs Large Area Stripe
Part Number Size Grade Color Per Box Per Case
Can be rinsed and used over and over again. 048011-18698 1" 50 Green 20 80
Removal (LASR)
Part Number Size Pads Per Box Boxes Per Case 048011-18706 1" 80 Yellow 20 80 Adaptor
051131-07447 6" x 9" 20 3 048011-18710 1" 120 White 20 80 Fits the (LASR) disc assembly
048011-18730 2" 50 Green 10 40 (PN 07517) to the tool
Ultra Fine Pad – Gray 048011-18732 2" 80 Yellow 10 40 with a 5/8"-11 shaft.
Used to finish sand scratches after 048011-18733 2" 120 White 10 40
using Wet or Dry abrasives in the
048011-18734 3" 50 Green 10 40
360A grit range. Reusable.
048011-18736 3" 80 Yellow 10 40
Part Number Size Pads Per Box Boxes Per Case Part Number Quantity Per Case
048011-18737 3" 120 White 10 40 051131-07519 1
051131-07448 6" x 9" 20 3

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0516-04 5/3/06 10:02 AM Page 528

516-06

GRACO INC.
PUMP BASED SPRAY PACKAGES
General purpose sprayers for medium pressure and flow 237158 - 74:1 Sprayer
applications. For light to heavy viscosity materials such as This 74:1 is for demanding applications requiring extremely high
anti-corrosion coatings, architectural coatings and coal tar pressures because of high viscosity, hard-to-atomize coatings and very
epoxies used in shipyards and large construction projects. long hose lengths used in shipyards.
244461 - 33:1 Sprayer
• 7250 psi (500 bar) maximum
• 3300 psi (228 bar) maximum fluid fluid working pressure
working pressure
• 4.2 gpm (16 lpm) maximum
• 2.9 gpm (11 lpm) maximum continuous flow at 60 cpm
continuous flow at 60 cpm

244468 - 41:1 Sprayer


• 4100 psi (283 bar) maximum fluid
working pressure
• 2.3 gpm (8.7 lpm) maximum 74:1
continuous flow at 60 cpm

33:1
Heavy-duty sprayers for continuous application of medium
to heavy viscosity coatings. Ideal for hard-to-atomize, anti-corrosion
coatings, architectural coatings and coal tar epoxies used in shipyards.
244474 - 45:1 Sprayer
231921 - 30:1 Sprayer
• 4500 psi (310 bar) maximum fluid working pressure
234725 - 30:1 Sprayer, Bare
• 4.0 gpm (15.2 lpm) maximum continuous flow at 60 cpm 234727 - 30:1 Sprayer, with Gun
234726 - 40:1 Sprayer, Bare
244482 - 56:1 Sprayer 234728 - 40:1 Sprayer, with Gun
• 5600 psi (386 bar) maximum fluid working pressure The 30:1 and 40:1 airless units are used for routine maintenance
• 3.4 gpm (12.9 lpm) maximum continuous flow at 60 cpm repair and repainting on board. They handle a wide variety of
coatings, including light to medium viscosity materials. This
Higher pressure sprayers designed to handle a cart design is well balanced allowing easy
wide variety of materials such as anti-corrosion movement on-site and simple access for
coatings, architectural coatings, coal tar epoxies, maintenance. Available in bare and
urethane coatings and zinc-rich primers with complete units.
viscosities ranging from light to heavy to
ultra-high 100% solids. • 3000 psi (210 bar)
maximum fluid
244491 - 68:1 Sprayer
working pressure
• 6800 psi (469 bar) maximum fluid
working pressure • 1.0 gpm (3.8 lpm)
maximum
• 2.9 gpm (11 lpm) maximum continuous continuous flow
flow at 60 cpm
• 1/2 npt (f) air inlet
244500 - 80:1 Sprayer size
• 7250 psi (500 bar) maximum fluid
working pressure 30:1
• 2.3 gpm (8.7 lpm) maximum continuous flow at 60 cpm

SPRAY GUNS Full line of GRACO Spray Equipment Available From

PUMPS WUENSCH SALES CO. (see page 1405)


HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
AIRLESS SPRAYERS E-mail: sales@wuenschsales.com • Web: www.wuenschsales.com
New 515 5/3/06 10:04 AM Page 1

517-06

GRACO INC.
Airless Spray Gun 4500 psi (310 bar)
248609 Round handle, four-finger trigger, GHD tip guard, NO TIP End Connections
248610 Round handle, four-finger trigger, 519 flat tip Part # Length Diameter 1 & 2 (Female)
248611 Oval-insulated handle, four-finger trigger, 519 GHD RAC tip H43810 10 ft (3.0 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
248612 Oval-insulated handle, two-finger trigger, 519 GHD RAC tip H43825 25 ft (7.6 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
248613 Round handle, four-finger trigger, 519 GHD RAC tip H43850 50 ft (15.2 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
248614 Round handle, two-finger trigger, 519 GHD RAC tip H4381X 100 ft (30.4 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
H45010 10 ft (3.0 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
A durable high-pressure spray gun for heavy-duty viscosity coatings used on H45025 25 ft (7.6 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
ships and other large steel or concrete structures. The gun is made of steel and H45050 50 ft (15.2 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
rated at 7250 psi. Ergonomic handle and lightweight design offer comfort H4501X 100 ft (30.4 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
even in the toughest environments.
• High Pressure output, 7250 psi (500 bar) 5600 psi (386 bar)
• HD RAC Switch Tip reverses to easily End Connections
clean plugged tips Part # Length Diameter 1 & 2 (Female)
• Ergonomic handle improves operator H52503 3 ft (0.9 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
comfort and reduces fatigue H52506 6 ft (1.8 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
H52510 10 ft (3.0 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
Accessories H52525 25 ft (7.6 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
287450 2-finger trigger kit H52550 50 ft (15.2 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
287449 4-finger round trigger kit H5251X 100 ft (30.4 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
287451 4-finger oval insulation trigger kit H53803 3 ft (0.9 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
246294 10 in (254 mm) gun extension, 7250 psi (500 bar, 50 MPa) H53806 6 ft (1.8 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
246295 15 in (380 mm) gun extension, 7250 psi (500 bar, 50 MPa) H53810 10 ft (3.0 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
246296 18 in (457 mm) gun extension, 7250 psi (500 bar, 50 MPa) H53825 25 ft (7.6 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
246297 180º spray nozzle, 7/8-14 UNC-2B, 7250 psi (500 bar, 50 MPa) H53850 50 ft (15.2 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
248837 Gun repair kit, includes gasket, needle and seat H5381X 100 ft (30.4 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
245994 GHD tip guard kit H55010 10 ft (3.0 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
287032 Filter, 60 mesh H55025 25 ft (7.6 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
287033 Filter, 100 mesh H55050 50 ft (15.2 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
H5501X 100 ft (30.4 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
High Pressure Fluid Hoses
Hoses offer greater flexibility and easier 7250 psi (500 bar)
movement on the job. Get less pressure End Connections
drop for more performance at the gun, Part # Length Diameter 1 & 2 (Female)
an upgraded conductive core to protect H72503 3 ft (0.9 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
against static charge build-up and a tough H72506 6 ft (1.8 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
urethane jacket to resist abrasion and H72510 10 ft (3.0 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
chemicals for longer life. H72525 25 ft (7.6 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
H72550 50 ft (15.2 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
4500 psi (310 bar) H7251X 100 ft (30.4 m) 1/4" (6.4 mm) 1/4" (6.4 mm)
End Connections H73803 3 ft (0.9 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
Part # Length Diameter 1 & 2 (Female) H73806 6 ft (1.8 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
H42503 3 ft (0.9 m) 1/4" (6.4 mm) 1/4" (6.4 mm) H73810 10 ft (3.0 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
H42506 6 ft (1.8 m) 1/4" (6.4 mm) 1/4" (6.4 mm) H73825 25 ft (7.6 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
H42510 10 ft (3.0 m) 1/4" (6.4 mm) 1/4" (6.4 mm) H73850 50 ft (15.2 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
H42525 25 ft (7.6 m) 1/4" (6.4 mm) 1/4" (6.4 mm) H7381X 100 ft (30.4 m) 3/8" (9.5 mm) 3/8" (9.5 mm)
H42550 50 ft (15.2 m) 1/4" (6.4 mm) 1/4" (6.4 mm) H75010 10 ft (3.0 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
H4251X 100 ft (30.4 m) 1/4" (6.4 mm) 1/4" (6.4 mm) H75025 25 ft (7.6 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
H43803 3 ft (0.9 m) 3/8" (9.5 mm) 3/8" (9.5 mm) H75050 50 ft (15.2 m) 1/2" (12.7 mm) 1/2" (12.7 mm)
H43806 6 ft (1.8 m) 3/8" (9.5 mm) 3/8" (9.5 mm) H7501X 100 ft (30.4 m) 1/2" (12.7 mm) 1/2" (12.7 mm)

For more information on Graco high performance coatings


and foam equipment, visit us online at www.graco.com
or call us toll-free at 1.877.844.7226.
0530-03 5/3/06 10:05 AM Page 530

518-06

GRACO INC.
PUMP BASED SPRAY PACKAGES

Plural Component Proportioning Unit All units include hoppers, 50 ft (15.3 m) hose, 6 ft (1.8 m) whip hose and
XTR spray gun. All gallons per minute displayed at 40 cpm @ 1:1 ratio.
Sprays tough, 100% solids coatings Hazardous Location Proportioners
under the harshest conditions. 233855 Xtreme Mix 500, standard motor, 45:1, 5.3 gpm (20.1 lpm)
Designed for short pot-life materials, 233859 Xtreme Mix 500, quiet motor, 45:1, 5.3 gpm (20.1 lpm)
easy-to-use, portable and offers 233856 Xtreme Mix 440, standard motor, 56:1, 4.5 gpm (17 lpm)
quick-change selectable ratio. 233860 Xtreme Mix 440, quiet motor, 56:1, 4.5 gpm (17 lpm)
The unit provides ratio assurance 233857 Xtreme Mix 360, standard motor, 68:1, 3.9 gpm (14.8 lpm)
with alarms and auto-shutdown in 233861 Xtreme Mix 360, quiet motor, 68:1, 3.9 gpm (14.8 lpm)
addition to reporting and on-board 233858 Xtreme Mix 290, standard motor, 80:1, 3.1 gpm (11.7 lpm)
diagnostics. 233862 Xtreme Mix 290, quiet motor, 80:1, 3.1 gpm (11.7 lpm)
234616 Xtreme Mix 185, 47:1, 1 gpm (4 lpm)
234838 Xtreme Mix 185, with (2) VISCON HP (240V) heaters,
• Reduce material waste by up
47:1, 1 gpm (4 lpm)
to 25% by mixing on demand 234840 Xtreme Mix 185 with (2) VISCON HP (480V) heaters,
• Quick change, selectable 47:1, 1 gpm (4 lpm)
ratio from 1:1 to 10:1 Non-Hazardous Location Proportioners
in 0.1 increments 233863 Xtreme Mix 500, standard motor, 45:1, 5.3 gpm (20.1 lpm)
• Simple and easy-to-use 233867 Xtreme Mix 500, quiet motor, 45:1, 5.3 gpm (20.1 lpm)
• Standard features include ratio 233864 Xtreme Mix 440, standard motor, 56:1, 4.5 gpm (17 lpm)
assurance, data reporting and 233868 Xtreme Mix 440, quiet motor, 56:1, 4.5 gpm (17 lpm)
onboard diagnostics 233865 Xtreme Mix 360, standard motor, 68:1, 3.9 gpm (14.8 lpm)
233869 Xtreme Mix 360, quiet motor, 68:1, 3.9 gpm (14.8 lpm)
233866 Xtreme Mix 290, standard motor, 80:1, 3.1 gpm (11.7 lpm)
233870 Xtreme Mix 290, quiet motor, 80:1, 3.1 gpm (11.7 lpm)
234617 Xtreme Mix 185, 47:1, 1 gpm (4 lpm)
Stainless Steel Airless Spray Package 234839 Xtreme Mix 185 with (2) VISCON HP (240V) heaters,
47:1, 1 gpm (4 lpm)
232433 234841 Xtreme Mix 185 with (2) VISCON HP (480V) heaters,
This 23:1 sprayer is a lightweight 47:1, 1 gpm (4 lpm)
(48 lbs./21/7 kg) and highly
portable unit for those “hard to Xtreme Mix Proportioners Set-Up for Pressure Feeding
No hoppers, hose or gun; requires mixing manifold
reach” places. Maneuvering
248842 Xtreme Mix 360, standard motor, 68:1, 39 gpm (14.8 lpm)
is easy, reducing the length of
Wall mount units, no hoppers
hose required and making it 234614 Xtreme Mix 185, hazardous locations, 47:1, 1 gpm (4.0 lpm)
practical at the job site. The 23:1 234615 Xtreme Mix 185, non-hazardous locations, 47:1, 1 gpm (4.0 lpm)
package handles a wide range of
coatings for on-board repair and Xtreme Mix Without Built-in Filters for Hazardous Locations
maintenance. 248831 Xtreme Mix 290, standard motor, 80:1, 3.1 gpm (11.7 lpm)
248832 Xtreme Mix 360, standard motor, 68:1, 3.9 gpm (14.8 lpm)
• 2760 psi (190 bar) maximum fluid working pressure 248833 Xtreme Mix 440, standard motor, 56:1, 4.5 gpm (17 lpm)
• 0.5 gpm (1.9 lpm) maximum continuous flow 248834 Xtreme Mix 500, standard motor, 45:1, 5.3 gpm (20.1 lpm)
• 3/8 npt (f) air inlet size (at pump)

Exclusive U.S. Stocking distributor


121 Dell Dale Avenue, Channelview, Texas 77530 for Dasic Marine Ltd. tank cleaning
Tel: 281-860-0228 Fax: 281-860-0300 machines and ventilators. Distributor
Toll Free: 877-772-7151 for ARO and Graco pneumatic,
E-Mail: esiusa@enviro-techspecialties.com diaphragm and piston pumps.
www.enviro-techspecialties.com
0519-04 5/3/06 10:06 AM Page 1

519-06

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0520-04 5/3/06 10:07 AM Page 1

520-06

HYDRAULIC LUBRICATION FITTINGS NON-CORROSIVE FITTINGS


Overall
1/8” PIPE THREAD Fitting Type Thread Length
MONEL
M-1184 Str. 1/8" PTF 3/4"
1921-B 30° 1/8" PTF 1-1/4"
1922-B 67-1/2° 1/8" PTF 61/64"
1923-B 85° 1/8" PTF 7/8"
1961-B Str. 1/8" PTF 3/4"
B610 B611 B612 B613 B688 1962-B Str. 1/8" PTF 5/8"
1963-B Str. 1/8" PTF 1" 1969-B
Fitting Angle Length
1966-B Str. 1/4"-28 17/32"
B-606 90° 1-13/16"
B669 1968-B 45° 1/4"-28 15/16"
B-607 Str. 1-1/4"
1969-B 90° 1/4"-28 3/4"
B-610 Str. 21/32"
STAINLESS STEEL
B638 B-611 30° 7/8"
1921-S 30° 1/8" PTF 1-1/4"
B-612 67-1/2° 7/8"
1922-S 67-1/2° 1/8" PTF 61/64"
B-613 90° 27/32"
1923-S 85° 1/8" PTF 7/8"
B-638 30° 23/32"
1961-S Str. 1/8" PTF 3/4"
B-669 Str. 1-3/4"
1966-S Str. 1/4"-28 17/32"
B-684 Str. 2-5/8" 1961-S
1968-S 45° 1/4"-28 13/16"
B-188 45° 7/8"
1969-S 90° 1/4"-28 3/4"
1/4” PIPE THREAD 1627-S Str. 1/4" pipe 15/16"
B627 – 1/4” PT with ball check. Overall length 15/16”. BUTTONHEAD FITTINGS
B629 – 1/4” PT with 67-1/2° angle, ball check.
Overall length 1-5/32”.
B645 1/4 PT 45° 5/8” 7/8”
B690 1/4 PT 90° Head Head
B629 B627 Standard Giant
1/4” – 28 TAPER THREAD
Also available in stainless steel
Fitting Type Thread Length
30619 Std. 1/8” pt 25/32"
17022 Std. 1/4” pt 53/64"
34373 Std. 3/8” pt 63/64"
A-1190 Std. 1/2” pt 11/16
B641 B652 B911 B914 B636 B637 1831 Giant 1/8” NPTF 1-5/32"
1823-1 Giant 1/4” NPTF 1-1/4"
GREASE-FITTING CAPS Fitting Angle Length
1822 Giant 3/8” NPTF 1-5/16"
1820-1 Giant 1/2” NPTF 1-1/16"
Colors B-636 45° 15/16"
Black White Red B-657 45° 13/16"
B-641 Str. 17/32"
DRIVE TYPE SPECIAL THREAD
Blue Green Yellow
B-652 Str. 11/16" Fitting Thread Angle Length Fitting Thread Length
B-680 Str. 31/32" B-1736 1/8" Str. 9/16" B-710 3/8”-24 11/16"
Tab Style Cap B-1698 Str. 1-1/8" B-511 3/16" Str. 9/16" B-711 5/16”-24 11/16"
B-914 90° 55/64" B-1743 1/4" Str. 35/64" B-5055 3/8”-18 11/16"
PIN TYPE FITTINGS B5055
B-608 5/16" Str. 35/16"
Overall Shank Hex B-1992 3/16" 45° 53/64"
Fitting Type Thread (M) Length Length Size B-1646 3/16" 65° 45/64"
M-336+ Str. 1/8" P.T.F.* 31/32" 17/64" 7/16" B-1744 1/4" 65° 44/64"
A-336 Str. 1/8" P.T.F.* 1" 5/16" 7/16" B-1630 5/16" 65° 45/64"
A-359 Str. 1/4" P.T 1-3/32" 5/16" 17/32"
A-684 45° 1/8" P.T. 1-1/2" 5/16" - B710 B699 B608
A-358 90° 1/8" P.T. 1-1/16" 5/16" -
MB-388 Str. 3/8” N.P.T 1” - - FITTING ASSORTMENTS
+Non-corrosive *SAE special short M-336 A-359
FITTING TOOLS B1120 – Plastic box
containing:
25 - 610 7 - 636
5 - 611 35 - 641
5 - 612 5 - 710
8 - 613 5 - 911
Model 60013 Model 60014 (total of 95 fittings)
60013 – Easy Out Tool, 1/8” P.T. B1130 – Metric Assortment plastic box
60014 – Easy Out Tool, 1/4”-28 TH. 50 - 819710, 25 - 819711, 25 - 819712.

Discount Prices • Huge Inventory • Specializing in all Major Manufacturers


ALEMITE • ARO • BALCRANK • BINKS • GRACO • LEGACY • LINCOLN • MACNAUGHT • PLEWS • STEWART WARNER • TRUFLATE
M. BROWN FITTING SPECIALISTS, INC.
PHONE: (800) 268-6210 – (201) 342-3332 – FAX: 201-342-5442
Credit Cards
Accepted
195-A West Shore Avenue, Bogota, NJ 07603 ISO 9002
Compliant
E-Mail: sales@mbfittings.com • www.mbfittings.com
Try Our Own Private Label DURALUBE Fittings Same Day Service
521 5/3/06 10:08 AM Page 1

521-06

METRIC - B.S.P. LUBRICATION FITTINGS


DIN #71412 – METRIC HYDRAULIC BSP FITTINGS – METRIC HYDRAULIC
Part No. Size Angle Height Shank Hex Part No. Size Angle Height Shank Hex
MB2106 6mm x 1.0 Straight 13.5mm 4.6mm 7mm MB2112 8mm x 1.25 Straight 15mm 5.5mm 9mm
MB2107 6mm x 1.0 45° 22.6mm 5.6mm 8.9mm MB2113 8mm x 1.25 45° 23.5mm 5.5mm 9mm
MB2108 6mm x 1.0 90° 18mm 5.6mm 9mm MB2114 8mm x 1.25 90° 18mm 5.5mm 9mm
MB2103 8mm x 1.0 Straight 15mm 5.8mm 9mm MB2136 10mm x 1.25 Straight 15mm 5.5mm 11mm
MB2104 8mm x 1.0 45° 22.6mm 5.6mm 8.9mm MB2137 10mm x 1.25 45° 25mm 5.5mm 11mm
MB2105 8mm x 1.0 90° 18mm 5.6mm 9mm MB2138 10mm x 1.25 90° 20mm 5.5mm 11mm
MB2109 10mm x 1.0 Straight 15.2mm 5.9mm 11mm MB2121 10mm x 1.5 Straight 15mm 5.5mm 11mm
MB2110 10mm x 1.0 45° 23.5mm 5.6mm 11mm MB2122 10mm x 1.5 45° 25mm 5.5mm 11mm
MB2111 10mm x 1.0 90° 19mm 5.6mm 11mm MB2123 10mm x 1.5 90° 20mm 5.5mm 11mm
MB2100 5mm x .80 Straight 15mm 5.5mm 7mm MB2142 12mm x 1.0 Straight 17.5mm 6.5mm 14mm
MB2101 5mm x .80 45° 23.5mm 5.5mm 9mm MB2143 12mm x 1.0 45° 22.5mm 6.5mm 14mm
MB2102 5mm x .80 90° 18mm 5.5mm 9mm MB2144 12mm x 1.0 90° 22mm 6.5mm 14mm
MB2115 6mm x .75 Straight 15mm 5.5mm 7mm MB2145 12mm x 1.25 Straight 17.5mm 6.5mm 14mm
MB2116 6mm x .75 45° 23.5mm 5.5mm 9mm MB2146 12mm x 1.25 45° 22.5mm 6.5mm 14mm
MB2117 6mm x .75 90° 18mm 5.5mm 9mm MB2147 12mm x 1.25 90° 22mm 6.5mm 14mm
MB2139 7mm x 1.0 Straight 15mm 5.5mm 9mm MB2124 12mm x 1.5 Straight 17.5mm 6.5mm 14mm
MB2140 7mm x 1.0 45° 23.5mm 5.5mm 9mm MB2125 12mm x 1.5 45° 22.5mm 6.5mm 14mm
MB2141 7mm x 1.0 90° 18mm 5.5mm 9mm MB2126 12mm x 1.5 90° 22mm 6.5mm 14mm
MB2118 8mm x .75 Straight 15mm 5.5mm 9mm MB2148 12mm x 1.75 Straight 17.5mm 6.5mm 14mm
MB2119 8mm x .75 45° 23.5mm 5.5mm 9mm MB2149 12mm x 1.75 45° 23mm 7mm 14mm
MB2120 8mm x .75 90° 18mm 5.5mm 9mm MB2150 12mm x 1.75 90° 22mm 6.5mm 14mm

STAINLESS STEEL – METRIC SELF-TAPPING – METRIC


MB2106S M6 x 1 Straight 15mm 5.5mm 7mm MB2206 6mm x 1.0 Straight 15mm 5.5mm 7mm
MB2107S M6 x 1 45° 23.5mm 5.5mm 9mm MB2207 6mm x 1.0 45° 20.2mm 5.5mm 9mm sq.
MB2108S M6 x 1 90° 18mm 5.5mm 9mm MB2208 6mm x 1.0 90° 18mm 5.5mm 9mm sq.
MB2103S M8 x 1 Straight 15mm 5.5mm 9mm MB2203 8mm x 1.0 Straight 15mm 5.5mm 9mm
MB2104S M8 x 1 45° 23mm 5.5mm 9mm MB2204 8mm x 1.0 45° 20.2mm 5.5mm 9mm sq.
MB2105S M8 x 1 90° 18mm 5.5mm 9mm MB2205 8mm x 1.0 90° 18mm 5.5mm 9mm sq.
MB2109S M10 x 1 Straight 15mm 5.5mm 11mm MB2209 10mm x 1.0 Straight 18mm 8mm 11mm
MB2110S M10 x 1 45° 25mm 5.5mm 11mm MB2210 10mm x 1.0 45° 20.5mm 5.5mm 11mm sq.
MB2111S M10 x 1 90° 20mm 5.5mm 11mm MB2211 10mm x 1.0 90° 18mm 5.5mm 11mm sq.

DRIVE TYPE – METRIC DIN #3404 – BUTTONHEAD – METRIC


MB2500 5mm Straight 15mm 5.5mm 8mm MB2306 6mm x 1 17mm 6mm 17mm
MB2506 6mm Straight 15mm 5.5mm 8mm MB2303 8mm x 1 17mm 6mm 17mm
MB2503 8mm Straight 15mm 5.5mm 10mm MB2304 8mm x 1.25 17mm 6mm 17mm
MB2509 10mm Straight 15mm 5.5mm 12mm MB2309 10mm x 1 17mm 6mm 17mm
MB2311 10mm x 1.5 17mm 6mm 17mm
DIN #3405 – FLUSH STYLE – METRIC MB2315 12mm x 1.5 17mm 6mm 17mm
MB2415 6mm x .75 Straight 8.5mm 5.5mm 7mm MB2316 12mm x 1.75 17mm 6mm 17mm
MB2406 6mm x 1.0 Straight 8.5mm 5.5mm 7mm
MB2403 8mm x 1.0 Straight 9.5mm 6.5mm 9mm
DIN #71412 – BSP STAINLESS STEEL
MB2412 8mm x 1.25 Straight 9.5mm 6.5mm 9mm MB2600S 1/8"-28 Straight 15mm 5.5mm 11mm
MB2409 10mm x 1.0 Straight 9.5mm 6.5mm 11mm MB2601S 1/8"-28 45° 25mm 5.5mm 11mm
MB2421 10mm x 1.5 Straight 9.5mm 6.5mm 11mm MB2602S 1/8"-28 90° 20mm 5.5mm 11mm
MB2424 12mm x 1.5 Straight 14mm 9.5mm 14mm MB2603S 1/4"-19 Straight 17.5mm 6.5mm 14mm
MB2604S 1/4"-19 45° 22.5mm 6.5mm 14mm
DIN #71412 – BRITISH STANDARD PIPE MB2605S 1/4"-19 90° 22mm 6.5mm 14mm
MB2600 1/8"-28 BSP Straight 15mm 5.5mm 11mm MB2606S 3/8"-19 Straight 18mm 7mm 17mm
MB2601 1/8"-28 BSP 45° 25mm 5.5mm 11mm MB2607S 3/8"-19 45° 25.5mm 7mm 17mm
MB2602 1/8"-28 BSP 90° 20mm 5.5mm 11mm MB2608S 3/8"-19 90° 20mm 7mm 17mm
MB2603 1/4"-19 BSP Straight 17.5mm 6.5mm 14mm DIN #3405 – BSP FLUSH STYLE
MB2604 1/4"-19 BSP 45° 22.5mm 6.5mm 14mm
MB2605 1/4"-19 BSP 90° 22mm 6.5mm 14mm MB2900 1/8"-28 BSP Straight 9.5mm 6.5mm 11mm
MB2606 3/8"-19 BSP Straight 18mm 7mm 17mm MB2903 1/4"-19 BSP Straight 14mm 9.5mm 14mm
MB2607 3/8"-19 BSP 45° 25.5mm 7mm 17mm MB2906 3/8"-19 BSP Straight 14mm 9.5mm 17mm
MB2608 3/8"-19 BSP 90° 20mm 7mm 17mm
PIN TYPE FITTINGS – B.S.P.
DIN #3404 BSP BUTTONHEAD MBSP-336 1/8” Str. B.S.P.
MB2800 1/8"-28 BSP 17mm 6mm 17mm
MB2803 1/4"-19 BSP 17mm 6mm 17mm
MBSP-359 1/4” Str. B.S.P.
MB2806 3/8"-19 BSP 18mm 7mm 17mm MBSP-388 3/8” Str. B.S.P.
MBSP-336 MBSP-359
Discount Prices • Huge Inventory • Specializing in all Major Manufacturers
ALEMITE • ARO • BALCRANK • BINKS • GRACO • LEGACY • LINCOLN • MACNAUGHT • PLEWS • STEWART WARNER • TRUFLATE
M. BROWN FITTING SPECIALISTS, INC.
PHONE: (800) 268-6210 – (201) 342-3332 – FAX: 201-342-5442
Credit Cards
Accepted
195-A West Shore Avenue, Bogota, NJ 07603 ISO 9002
Compliant
E-Mail: sales@mbfittings.com • www.mbfittings.com
Try Our Own Private Label DURALUBE Fittings Same Day Service
522 5/3/06 10:09 AM Page 1

522-06

HAND TOTE GREASE PUMP


Model 870 7110-007
Model 2264 (821514) Jet Power 50:1 ratio chassis grease pump:
Air operated one hand grease gun Ready-to-use system for refiners 25 lb. or 35 lb.
delivers 1,500 to 9,000 P.S.I. each time Lubricant pail for dispensing grease into chassis
trigger is pressed when attached to lube points on agricultural or industrial machinery.
compressed air supply of 30 to 150 lbs. Includes Jet Power pump, air coupler, pail handle,
Takes 14-1/2 oz. cartridge or holds 20 oz. drum cover, 1/4” x 7’ outlet hose and deluxe
bulk grease. grease control handle and Z-swivel. Does not
include follower plate.

Model 987
CONTROL HANDLES For 25-50 pound refinery containers or
Model Description Thread 60 pound bulk. Gasket and air vent in lid
3310-008 Control handle only 1/4 NPT assembly makes unit completely dust-
3310-010 handle w/z-swivel 1/4 NPT proof, leak-proof and spill-proof. Ideal for
use in all types of weather. Container
rust-proofed and finished in Lincoln red.
GREASE CARTRIDGE Height 31-3/4”; inside diameter of
container 12-1/2”. Optional follower plate
Model (819094) for Model 987 is 90579.
This 14-1/2 oz. cartridge contains
multi-purpose lithium grease. Fits
any standard size cartridge
grease gun.
TRUCKS and DOLLIES
HAND GUNS Model 477 (810125)
2-wheel truck for Model 877. Model 477
Attaches rigidly to container and
need not be removed when refilling.
Model 479 (810563)
4-caster band-type dolly for Model
Model 2284 877.
Variable stroke grease gun. Full 360° swing positions. 14 oz. cartridge Model 489 (820330)
loading. Develops up to 10,000 psi. For bulk or cartridge use. Suction Dolly for 25-lb., 35-lb., and 30 liter
filling. Standard bulk loading from a dispenser. Model 479
container. (Fits pails used with
Models 870, 820833 and 820834).
Model 274 (805598)
4 caster band dolly for Model
820832.

PUSH-TYPE HAND GUNS


Model 2274 (806042) for Hydraulic & Flush-Type Fittings
Three Way Gun, for 14-1/2 oz. grease cartridges or 20 oz. bulk grease, Simple thrust action. Internal spring returns handle to original position.
develops up to 10,000 lbs. pressure. Baked enamel paint. Spring 9 oz. capacity. 4200 psi. Fast volume delivery. Zinc plated. Equipped
primed. Curved Hydraulic Adapter with 1/8” P.T. with loader fitting 306740.
Model 7584 Hydraulic
Model 7584-F Flush type
Model 7584-Z Push type
Model 2275
One hand grease gun for grease SCREW-TYPE HAND GUN
cartridges or bulk grease. Model C-600
Develops up to 27” vacuum. For all types of pressure gun lubricants.
20 oz. bulk grease capacity. Operates by turning screw handle.
Remove head to fill. 8 oz. capacity.
Requires Rigid Outlet Connections or
Flexible Hose Assembly - please order
separately. Gun outlet 1/8” NPTF (f).

Discount Prices • Huge Inventory • Specializing in all Major Manufacturers


ALEMITE • ARO • BALCRANK • BINKS • GRACO • LEGACY • LINCOLN • MACNAUGHT • PLEWS • STEWART WARNER • TRUFLATE
M. BROWN FITTING SPECIALISTS, INC.
PHONE: (800) 268-6210 – (201) 342-3332 – FAX: 201-342-5442
Credit Cards
Accepted
195-A West Shore Avenue, Bogota, NJ 07603 ISO 9002
Compliant
E-Mail: sales@mbfittings.com • www.mbfittings.com
Try Our Own Private Label DURALUBE Fittings Same Day Service
523 5/3/06 10:10 AM Page 1

523-06

HYDRAULIC COUPLERS PIN TYPE COUPLERS


Named after the positive locking action of the
coupler and cross pin of the fitting. Attached to
hand gun hose assemblies for pin type fittings.
Model 349 Model 45076 Model 42395 Model 23724 Nozzle Thread Description
349 – Single sealing and gripping piston. Reversible jaws. 1/8” FPT. 48940 1/2”-27 USF W/wing nut
31527 – Extra jaws, set of 3, for 349. Taper Thread (m)
45076 – 5/8” O.D. Standard, for hand operated guns only. 1/8” FPT.
50491 1/8” NPTF (m) W/wing nut
35071 – Extra jaws, set of 3, for 45076.
42395 – Lock sleeve only. VB-942 1/8” NPTF (f) W/O wing nut
23724 – 1/8” F.P.T. by 7/16”-27, M.T. adapter (steel). 51185 1/8” NPTF W/wing nut

BUTTONHEAD ADAPTORS
HIGH PRESSURE GREASE HOSE
When ordering: Specify hose number and add suffix number to
indicate length required. Example: for Hose #42677 in a 10’ length,
order # 42677-10.
Model 42983 Model 26432 Model 42984
Model Inside Outside Couplings Maximum Minimum
40737 (not illustrated) – Standard button- 42984 – Same as 26432, with 23724 No. No. Dia. Recomended Burst
head coupler only, push-on. 7/16”-27 F.T. 1/8” F. pipe adapter. Working Pressure
40736 (not illustrated) – Standard button- 26432 – Giant buttonhead coupler Pressure P.S.I.
head coupler only, pull-on. 7/16”-27 F.T. only. 7/16”-27 F.T.
42983 – Same as 40736, with 23724
42677 1/4” 19/32” 1/2”-27 FBE 5,000 20,000
1/8” F. pipe adapter. 42602 3/8” 3/4” 1/4” MPT 4,000 16,000
HAND & POWER GUN HOSES 43792 3/8” 3/4” 3/8” MBE 4,000 16,000
Model 40917-12 SELF-STORING AIR HOSE
40917-12 – 12” Whip hose only, 3/16” I.D., 10,000 lbs. burst test,
1/8” M.P.T. both ends.
40917-18 – 18” Whip hose only, 3/16” I.D., 10,000 lbs. burst test,
1/8” M.P.T. both ends.
FOR BUTTON HEAD FITTINGS

Model 44230 45046-25 – For use on portable equipment to prevent tangling. 1/4”
I.D. nylon hose, coupled 1/4” N.P.T. (M), 25 ft. long, rating 200 PSI
working pressure. Retracts to coil automatically when released.
Model 44229

44230 – Whip Hose with giant buttonhead coupler and lock sleeve,
15” overall.
44229 – Whip Hose with standard buttonhead coupler and lock
sleeve, 15” overall. Model 2276
2276 – Suction gun with flexible vinyl plastic hose. 1-1/4 pt. or 17 oz.
HYDRAULIC ADAPTERS by weight oil capacity. No-leak plunger. 12”, 3/8” I.D. Hose.

Model 63951 Model 39972 Model 25931


MIDGET GREASE GUN
Use any grease packed in
Model 42463-12 standard 3.5 oz. cartridges.
Model 25931 Model 63951
90° Hydraulic to hydraulic with lock 6-1/2” Pipe only, 1/8” M.P.T.
sleeve #42395. Hand guns only.
Model 39972 Model 42463-12
8” Pipe only, 1/8” M.P.T. For power #40917-12 with #349 coupler and
guns. #42395 lock sleeve

FOR PIN FITTINGS Model 2278


2278 – Cartridge loaded grease gun.
Assembly Length Hose Coupler Model 2280 – 816232 – Replacement grease cartridge.
No. Midget grease gun 820061 – Swivel coupler. Fits all standard
A-908-A 1” 317850-1 VB-942 with cartridge. grease guns.
A-909-A 1-1/2” 317850-1F VB-942

Discount Prices • Huge Inventory • Specializing in all Major Manufacturers


ALEMITE • ARO • BALCRANK • BINKS • GRACO • LEGACY • LINCOLN • MACNAUGHT • PLEWS • STEWART WARNER • TRUFLATE
M. BROWN FITTING SPECIALISTS, INC.
PHONE: (800) 268-6210 – (201) 342-3332 – FAX: 201-342-5442
Credit Cards
Accepted
195-A West Shore Avenue, Bogota, NJ 07603 ISO 9002
Compliant
E-Mail: sales@mbfittings.com • www.mbfittings.com
Try Our Own Private Label DURALUBE Fittings Same Day Service
coopertools0109 5/3/06 10:11 AM Page 0109

524-06

NET-LINK CLOSER FOR CLOSING CHAIN LINKS


• Used on commercial fishing Approx. Capacity Replacement
boats and draggers for net Cat. Weight Length Link Diam. Cutter Head
No. ton kg (in.) (in.) Cat. No.
and mooring chains
1 3
• Designed to close heavy 0290MLC 7 ⁄ 2 3.4 30 ⁄8 0213LC
chain link
• Toggle joints turn 50 lbs. hand pressureto 4000 lbs. cutting pressure
• Screw-type adjustment realigns edges

INDUSTRIAL GRADE, CENTER CUT CUTTERS


• General plant maintenance tool
• Drop-forged, precision ground, alloy tool
Approx. Soft Materials Hard Materials Replacement steel jaws with center-cut blades
Cat. Weight Length (Up to Brinell 200, (Up to Brinell 300, Cutter Head • Cuts soft, medium, or hard materials
No. lbs. kg (in.) Rockwell C15) (in.) Rockwell C31) (in.) Cat. No. • Maximum hardness of material to be cut:
1490MC 2
3
⁄4 1 14
1
⁄ 16 3
⁄ 16 1413C Brinell 455/Rockwell C48
1 3 1 • Lockplate keeps jaws from loosening
0090MC 3 ⁄2 2 18 ⁄8 ⁄4 0013C
• Toggle joints turn 50 lbs. hand pressure to
1 7 5
0190MC 5 ⁄4 3 24 ⁄ 16 ⁄ 16 0113C 4000 lbs. cutting pressure
1 1 3 • Screw-type adjustment realigns edges
0290MC 8 ⁄2 4 30 ⁄2 ⁄8 0213C
7 9 7 • Steel handles with rubber grips
0390MC 12 ⁄ 8 6 36 ⁄ 16 ⁄ 16 0313C
1 11 1
0590MC 17 ⁄ 8 8 42 ⁄ 16 ⁄2 0513C

GENERAL PURPOSE CENTER CUT BOLT CUTTERS


• Series 2000 Bolt Cutter
• Drop-forged jaws with center-cut blades. Heat treated for
wear resistance and long cutting life
• Cuts soft, and medium/hard materials
Soft Materials Hard Materials • Maximum hardness of material to be cut: Brinell 300/
Approx. (Up to Brinell 200, (Up to Brinell 300, Replacement
Cat. Weight Length Rockwell C15) Rockwell C31) Cutter Head Rockwell C31
No. lbs. kg (in.) (in.) (in.) Cat. No. • Toggle joints turn 50 lbs. hand pressure to 4000 lbs. of
5 1 cutting pressure
1490AC 1.7 0.8 14 ⁄ 16 ⁄4 1413AC
3 5
• Precision cast, 1-piece, aluminum alloy handles with
0090AC 2.4 1.1 18 ⁄8 ⁄ 16 0013AC rubber grips
7 3
0190AC 4 1.8 24 ⁄ 16 ⁄8 0113AC

HEAVY DUTY CUTTERS


For Hard, Non-Alloy Chain 1/2'' (13mm) Capacity
• Extremely strong, durable tool
• Short-nosed jaws with high-tempered, center-cublades
Soft Materials Hard Materials • Cuts hard, non-alloy chain
Approx. (Up to Brinell 200, (Up to Brinell 300, Replacement • Maximum hardness of material to be cut: Brinell 455/
Cat. Weight Length Rockwell C15) Rockwell C31) Cutter Head Rockwell C48
No. lbs. kg (in.) (in.) (in.) Cat. No. • Lockplate keeps jaws from loosening
1 5 5
0190MHC 5 ⁄4 3 24 ⁄ 16 ⁄ 16 0113HC • Toggle joints turn 50 lbs. hand pressure to 4000 lbs.
0390MHX 13 6 36 7 7 0313HCX cutting pressure
⁄ 16 ⁄ 16
1 1
• Screw-type adjustment realigns edges
0590MHX 18 8 42 ⁄2 ⁄2 0513HCX
• MHX tools feature heavy duty straps

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
535 5/3/06 10:11 AM Page 1

525-06

WALTON COMPANY

PIPE AND STUD EXTRACTORS


Standard extractors for right-hand pipe and studs.
Also available for left-hand thread.
Specify “for left-hand thread” if required.
1. Four-point grip assures
strong bite.
2. Works with a shallow grip.
3. Shallow grip lessens expansion
and jamming.
4. Pulls rather than reams.
5. Releases instantly from bite after
job is completed.
Individual Sizes 6. Designed for strength, durability
and easy handling.
7. Heat-treated steel is harder than
For For
any material that will be
Extractor Broken Broken Stud
No. Pipe or Screw
removed.
8. All extractors have a rust
1 1/8” 3/8”
resistant, black oxide finish.
2 1/4” 1/2”
9. Complete set of only 10
Standard Boxed Sets
3 3/8” 5/8” or 3/4”
extractors fits every size and class Sets packed in sturdy plastic
4 1/2” — of pipe: standard, heavy and extra compartmented case
10 — 7/8” or 1” heavy, from 1/8” to 2”.
5 3/4” 1-1/8” or 1-1/4” Set No. Contents
10. The same set of tools fits
6 1” 1-1/2” or 1-3/4” every stud and screw from 205 1 each #1, #2, #3, #4, #5
7 1-1/4” 2” 3/8” to 3-1/2”. 206 1 each #1, #2, #3, #4, #5, #6
8 1-1/2” 2-1/4” or 2-1/2” 207 1 each #1, #2, #3, #4, #10, #5, #6
9 2” 3” or 3-1/2” 210 1 each of all 10 sizes

PILOTED SPINDLE TAPPER


During tapping operations, the spindle of the drill press serves merely as a support for
the guide post of this tool, although it may be utilized to raise or lower the tap, and to
hold it in a lifted position while the work is shifted and centered.
The centerline of the tap and the centerline of the drilled hole will be identical as the
same machine spindle is used for both operations.
Allows the tap to be fed into the workpiece with two-hand or fingertip control,
affording a more sensitive feel and reducing tap breakage.
Held true in a lathe or drill press chuck, and thus guidably supported and aligned
while being turned by hand.

Tapper No. Tap Size Capacity


#0 – 1/4”
176
1.5 mm – 6 mm
#12 – 1/2”
276
6 mm – 12 mm

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0536-04 5/3/06 4:08 PM Page 1

526-06

WALTON COMPANY

TAP EXTRACTORS
Single Units and Standard Sets

STANDARD SETS
Single Units and Extra Fingers
6-Flute 4-Flute 3-Flute 2-Flute
Walton
Tap
Extractor
Size Standard Sets
#1, #2, #3
#4 (3 mm) — — 10043 10042
Packed in
#5 (1/8”) (3.2 mm) — — 10053 10052
6-compartment
#6 (3.5 mm) — 10064 10063 10062 plastic case
#8 (4 mm) — 10084 10083 10082
#10 (3/16”) (5 mm) — 10104 10103 10102
#12 (5.5 mm) — 10124 10123 10122
1/4” (6 mm) — 10254 10253 10252
9/32” (7 mm) — 10284 — —
5/16” (7 mm, 8 mm) — 10314 10313 10312
11/32” — — 10344 — —
3/8” (9 mm, 10 mm) — 10374 10373 10372
13/32” (10 mm) — 10404 — — Standard Sets
7/16” (11 mm) — 10434 10433 10432 #11, #13, #15
1/2” (12 mm) — 10504 10503 10502
Packed in
9/16” (14 mm) — 10564 10563 — 15-compartment
5/8” (16 mm) — 10624 10623 — plastic case
11/16” (18 mm) — 10684 — —
3/4” (18 mm, 20 mm) — 10754 10753 —
7/8” (22 mm) — 10874 10873 —
1” (24 mm, 25 mm) — 11004 11003 —
1-1/8” (26-28 mm) 11126 11124 — —
1-1/4” (30-32 mm) 11256 11254 — — Sizes Included:
1-3/8” (35-36 mm) 11376 11374 — — No. 1 No. 2 No. 3 No. 11 No. 13 No.15
1-1/2” (38 mm) 11506 11504 — — — — — — 4* 4*
1. It is important that all orders for Tap Extractors or parts should clearly specify the — — — 1/8* 5* 5*
required size and flute style. — — — — 6* 6*
2. List set number only when ordering complete Standard Sets.
— — — — 8 8
3/16 — — 3/16 10 10
Tap Extractor Parts — — — — 12 12
1/4 1/4 — 1/4 1/4 1/4
5/16 5/16 5/16 5/16 5/16 5/16
Holder
3/8 3/8 3/8 3/8 3/8 3/8
Fingers 7/16 7/16 7/16 7/16 7/16 7/16
1/2 1/2 1/2 1/2 1/2 1/2
Collar — 5/8 9/16 5/8 5/8 5/8
Sleeve
— — 5/8 3/4 3/4 3/4
Tap extractors also available: — — — 7/8 — 7/8
To fit Pipe Taps 1/8” through 1” in 4-flute and 5-flute styles;
— — — 1 — 1
and STI to fit taps for Helical Coil Wire Screw Thread Inserts,
sizes #4 through 5/8” in 4-flute, 3-flute and 2-flute styles. *3-flute style

® 600 New Park Avenue


Phone: (860) 523-5231
West Hartford, CT 06110
Fax: (860) 236-9968
P.O. Box 330815
www.waltontools.com West Hartford, CT 06133
Manufacturers of Tap Extractors • Tap Extensions • Pipe and Stud Extractors • Piloted Spindle Tappers • Ergonomic File Handles
537 5/3/06 10:13 AM Page 1

527-06

WALTON COMPANY
TAP EXTENSIONS
STYLE “B”—For Both Machine and Hand Tapping Operations
Set #9

Tap Size EDP No. A B D J E C


0–6 (1.6-3.5mm) 40006 5/16 .250 .142 .112 .191 .255
8 (4mm) 40008 3/8 .250 .169 .133 .191 .255
10 (3/16”) (4.5-5mm) 40010 3/8 .312 .195 .154 .191 .255
12 (5.5mm) 40012 7/16 .312 .220 .166 .164 .219
1/4” (6mm) 40025 7/16 .375 .256 .193 .191 .255
5/16” (7-8mm) 40031 1/2 .437 .319 .240 .237 .318
3/8” (10mm) 40037 5/8 .500 .382 .288 .285 .381
7/16” (11mm) 40043 5/8 .500 .324 .244 .241 .323
1/2” (12mm) 40050 5/8 .500 .368 .277 .274 .367
Set #9 40090 Complete Set of Nine Extensions Squared end permits use in
9/16” (14mm) 40056 11/16 .562 .430 .322 .320 .428 hand tapping operation, as well
5/8” (16mm) 40062 3/4 .625 .481 .361 .359 .479 as elongation by coupling
11/16” (17-18mm) 40068 7/8 .687 .544 .408 .405 .541 extensions together.
3/4” 40075 7/8 .750 .591 .443 .441 .589
13/16” (20mm) 40081 1-1/16 .812 .654 .493 .488 .651
7/8” (22mm) 40087 1-1/16 .906 .698 .524 .522 .696
15/16” (24mm) 40093 1-1/16 .937 .765 .575 .570 .759
1” (25mm) 40100 1-1/16 1.000 .801 .601 .599 .799
1-1/16” (27mm) 40106 1-3/16 1.140 .897 .674 .671 .895
1-1/8” (27mm) 40112 1-3/16 1.140 .897 .674 .671 .895
1-3/16” (30mm) 40118 1-3/8 1.328 1.022 .768 .765 1.020
1-1/4” (30mm) 40125 1-3/8 1.328 1.022 .768 .765 1.020
1-5/16” (33mm) 40131 1-1/2 1.437 1.109 .833 .830 1.107
1-3/8” (33mm) 40137 1-1/2 1.437 1.109 .833 .830 1.107
1-7/16” (36mm) 40143 1-3/4 1.640 1.234 .927 .924 1.232
1-1/2” (38mm) 40150 1-3/4 1.640 1.234 .927 .924 1.232

Pipe Tap Size EDP No. A B D J E C


1/16” & 1/8” 41006 5/8 .497 .3125 .235 .233 .312
Internal square transmits
driving torque. Smaller
1/8” 41012 3/4 .559 .4375 .329 .327 .437
O.D. here permits
1/4” 41025 15/16 .715 .5625 .422 .420 .562
extension to pass through
3/8” 41037 1-1/16 .840 .7000 .532 .530 .699 a standard liner bushing.
1/2” 41050 1-1/16 .840 .6875 .516 .514 .687
3/4” 41075 1-3/16 1.139 .9120 .695 .678 .905
1” 41100 1-1/2 1.436 1.1310 .859 .842 1.124
SIZE RANGE—Five tools to fit 6 different sizes of Pipe Taps (4-flute and 5-flute styles) from 1/16” through 1/2”
Pipe as tabulated above.

STYLE “A”—For Hand Tapping Only

Tap Square Shank Opening


Size EDP No. of Tap Socket
#10 (3/16”) 45010 .152 sq. .154 sq.
1/4” 45025 .191 sq. .193 sq.
5/16” 45031 .238 sq. .242 sq.
3/8” (.206 sq.) 45037 .206 sq. .210 sq. Ergonomic File Handle
3/8” (.286 sq.) 45038 *.286 sq. *.290 sq.
Ergonomic file handle’s design incorporates
7/16” 45043 .242 sq. .246 sq.
the natural wrist angle of approximately
1/2” 45050 .275 sq. .279 sq.
35 degrees. The handle is constructed so
5/8” 45062 .360 sq. .364 sq.
that the tool’s axis is better aligned with
3/4” 45075 .442 sq. .446 sq.
the forearm, significantly reducing muscle
7/8” 45087 .523 sq. .527 sq.
fatigue. It allows the operator to rotate the
1” 45100 .600 sq. .604 sq.
arm slightly to change the angle of the file,
* This 3/8” (.286 sq.) size is more frequently used than the 3/8” (.206 sq.) size. Specify which is required. and still apply the necessary pressure to
Each set contains two 5” long extensions . . . which can be used either singly (to lengthen the tap 5”) or in keep the file in contact.
combination (to lengthen the tap 10”).

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
3022 5/3/06 10:14 AM Page 1

528-06

Taps & Dies


Round
Die To order, specify:
1) Tap set or die (Metric & BSW tap sets have 3 pieces; BSP tap sets have 2 pieces)
2) Size Select from charts below and on facing page
3) Thread Metric coarse and fine, BSW, BSP and NC are shown.
Hexagon Other threads available upon request.
Die Tap Set 4) Material Carton steel standard; high speed steel available upon request

Round Adjustable Dies & Tap Sets – Metric Coarse & Fine
Size Pitch O.D. Size Pitch O.D. Size Pitch O.D.
M1 x 0.2 16 M11 x 0.75 30 M22 x 1.0 55
M1 x 0.25 16 M11 x 1.0 30 M22 x 1.25 55
M2 x 0.25 16 M11 x 1.5 30 M22 x 1.5 55
M2 x 0.4 16 M12 x 1.0 38 M22 x 2.0 55
M2.5 x 0.45 16 M12 x 1.25 38 M22 x 2.5 55
M3 x 0.35 20 M12 x 1.5 38 M24 x 1.0 55
M3 x 0.5 20 M12 x 1.75 38 M24 x 1.25 55
M3.5 x 0.35 20 M14 x 1.0 38 M24 x 1.5 55
M3.5 x 0.6 20 M14 x 1.25 38 M24 x 2.0 55
M4 x 0.5 20 M14 x 1.5 38 M24 x 2.5 55
M4 x 0.7 20 M14 x 1.75 38 M24 x 3.0 55
M4.5 x 0.5 20 M14 x 2.0 38 M25 x 1.0 55
M4.5 x 0.75 20 M15 x 1.0 45 M25 x 1.5 55
M5 x 0.5 20 M15 x 1.5 45 M25 x 2.0 55
M5 x 0.75 20 M16 x 1.0 45 M26 x 1.5 65
M5 x 0.8 20 M16 x 1.25 45 M27 x 1.0 65
M5.5 x 0.5 20 M16 x 1.5 45 M27 x 1.5 65
M6 x 0.5 20 M16 x 1.75 45 M27 x 2.0 65
M6 x 0.75 20 M16 x 2.0 45 M27 x 3.0 65
M6 x 1.0 20 M17 x 1.0 45 M28 x 1.0 65
M7 x 0.75 25 M17 x 1.5 45 M28 x 1.5 65
M7 x 1.0 25 M18 x 1.0 45 M28 x 2.0 65
M8 x 0.5 25 M18 x 1.25 45 M30 x 1.0 65
M8 x 0.75 25 M18 x 1.5 45 M30 x 1.5 65
M8 x 1.0 25 M18 x 1.75 45 M30 x 2.0 65
M8 x 1.25 25 M18 x 2.0 45 M30 x 3.0 65
M8 x 1.5 25 M18 x 2.5 45 M30 x 3.5 65
M9 x 0.75 25 M20 x 1.0 45 M33 x 3.5 65
M9 x 1.0 25 M20 x 1.25 45 M36 x 4.0 65
M9 x 1.25 25 M20 x 1.5 45 M39 x 4.0 75
M10 x 0.75 30 M20 x 2.0 45 M42 x 4.5 75
M10 x 1.0 30 M20 x 2.5 45
M10 x 1.25 30 Bold = Coarse Thread
M10 x 1.5 30 Plain = Fine Thread

Hexagon Re-threading Dies – Metric Coarse

Across Across Across


Size Pitch Flats
Size Pitch Flats Size Pitch Flats
M2 x 0.4 19 M7 x 1.0 22 M16 x 2.0 41
M3 x 0.5 19 M8 x 1.25 22 M18 x 2.5 41
M3.5 x 0.6 19 M9 x 1.25 22 M20 x 2.5 41
M4 x 0.7 19 M10 x 1.5 27 M22 x 2.5 50
M4.5 x 0.75 19 M11 x 1.5 27 M24 x 3.0 50
M5 x 0.8 19 M12 x 1.75 36 M27 x 3.0 60
M6 x 1.0 19 M14 x 2.0 36 M30 x 3.5 60

Full Range of Taps & Dies Available From

GULF MARINE & INDUSTRIAL SUPPLIES, INC.


Long Beach, CA Houston, TX New Orleans, LA Jacksonville, FL
Tel: 562-495-1796 Tel: 713-514-8010 Tel: 504-525-6252 Tel: 904-358-2792
Fax: 562-435-4300 Fax: 713-514-8000 Fax: 504-525-4761 Fax: 904-358-2800
3023 5/3/06 10:15 AM Page 1

529-06

British Standard Whitworth (BSW)


BSP Tap Set Dies & Tap Sets
Round Die Hexagon Die
BSW Tap Set Taps
Hex Die
Thread Round Die Across Length of
Size O.D. (mm) Flats mm) Threads Length
British Standard Pipe (BSP) Dies & Tap Sets Overall
(in.)
Hex Die Taps 1/8 x 40 20 19 1/2 1-9/16
Die O.D. Across Length of 5/32 x 32 20 19 3/4 2-1/4
Size Thread
(mm) Flats Threads Length 3/16 x 24 20 19 23/32 1-15/16
(mm) (in.) Overall 7/32 x 24 20 19 1 2-1/2
1/4 x 20 20 19 7/8 2-3/16
1/8 x 28 38 36 23/32 2-15/32
5/16 x 18 25 22 1 2-15/32
1/4 x 19 38 36 25/32 2-15/32 3/8 x 16 30 27 1-1/8 2-3/4
3/8 x 19 45 41 25/32 2-3/4 7/16 x 14 30 27 1-3/16 2-15/16
1/2 x 14 45 41 7/8 3-5/32 1/2 x 12 38 36 1-1/4 3-5/32
5/8 x 14 55 50 1 3-5/32 9/16 x 12 38 36 1-1/4 3-5/32
3/4 x 14 65 60 1-1/8 3-15/16 5/8 x 11 45 41 1-13/32 3-9/16
7/8 x 14 65 60 1-1/8 3-15/16 3/4 x 10 45 41 1-9/16 4-1/8
1 x 11 65 60 1-1/4 4-11/32 7/8 x 9 55 50 1-13/16 4-11/32
1 x 8 55 50 1-15/16 4-11/32
1-1/8 x 11 75 70 1-1/4 4-11/32
1-1/8 x 7 65 60 2-3/16 5-3/16
1-1/4 x 11 75 70 1-1/4 4-29/32 1-1/4 x 7 65 60 2-3/16 5-3/16
1-1/2 x 11 90 85 1-1/4 5-1/2 1-3/8 x 6 65 60 2-15/32 5-29/32
1-3/4 x 11 105 100 1-13/32 6-5/16 1-1/2 x 6 75 70 2-15/32 5-29/32
2 x 11 105 100 1-13/32 6-5/16 2 x 4.5 90 85 3-1/2 7-3/4

Tap & Die Sets


3 to 12MM SET 6 to 24MM SET
Coarse 3, 4, 5, 6, 7, 8, 9, 10, 12 Coarse & Fine 6, 8, 10, 12, 14, 16,
Fine 3, 4, 5, 6, 7, 8, 10, 12 18, 20, 22, 24
Set includes: Set includes:
17 Plug Taps 20 Plug Taps
17 Round Dies 20 Round Dies
1 T-Handle Tap Wrench 1 Adjustable Tap Wrench
1 Adjustable Tap Wrench 1 T-Handle Tap Wrench
1 Die Stock 1" O.D. 2 Die Stocks 1.5" & 2" O.D.
1 Metric Screw Pitch Gauge 1 Screwdriver
1 Screwdriver 3x40mm Weight: 14 lbs. (6.34 kg)
Weight: 3 lbs. (1.36 kg)

1/8" to 3/4" B.S.P. SET 1/4" to 1" B.S.W. SET


1/8", 1/4", 3/8", 1/2", 5/8", 3/4" 1/4", 5/16", 3/8", 7/16", 1/2", 5/8",
Set includes: 3/4", 7/8", 1"
6 Taper Taps Set includes:
6 Round Dies 9 Plug Taps
1 Adjustable Tap Wrench 9 Round Dies
1 Die Stock 2" O.D. 2 Adjustable Tap Wrenches
Weight: 11 lbs. (5 kg) 1 Die Stock 2" O.D.
Weight: 13 lbs. (5.9 kg)

A wide range of different tap & die set combinations are available. Four typical assortments are shown above, but your chandler or tool
distributor may offer many others. To order sets not shown here, specify the required tap and die sizes, thread type, and tools desired.

28 Paul Dr., San Rafael, CA 94903


Large Selection of Metric Tools
Precision Measuring Tools Metric Marine & Industrial Phone: 415-492-9202
Metric Cutting Tools Fax: 415-492-9206
E-mail: info@metricmarine.com
European Specialties
Web: www.metricmarine.com
Your Source for European Specialty Tools, Tubing & Fittings
0538-04 5/3/06 10:17 AM Page 1

530-06

URREA PROFESSIONAL TOOLS, INC.


SOCKETS AND ACCESSORIES 1/4" Square Drive 3/8" Square Drive
STANDARD LENGTH SOCKETS—6 POINT DEEP LENGTH SOCKETS—6 POINT STANDARD LENGTH SOCKETS—6 POINT
No. No. No.
4704 1/8" 7/8" .02 4706L 3/16" 2" .05 *5208H 1⁄4" 1-3⁄32" .05
*4705 5/32" 7/8" .02 4707L 7/32" 2" .05 *5210H 5⁄16" 1-3⁄32" .05
*4706 3/16" 7/8" .02 *5212H 3⁄8" 1-3⁄32" .05
4708L 1/4" 2" .05
*4707 7/32" 7/8" .02 *5214H 7⁄16" 1-3⁄32" .05
4709L 9/32" 2" .05 *5216H 1⁄2" 1-1/8" .06
*4708 1/4" 7/8" .02
*4709 9/32" 7/8" .02 4710L 5/16" 2" .06 *5218H 9⁄16" 1-1/8" .09
*4710 5/16" 7/8" .02 4711L 11/32" 2" .06 *5220H 5⁄8" 1-1/8" .10
*4711 11/32" 7/8" .02 4712L 3/8" 2" .08 *5222H 11⁄16" 1-1/8" .12
*4712 3/8" 7/8" .03 4714L 7/16" 2" .09 *5224H 3⁄4" 1-3/16" .15
*4714 7/16" 7/8" .03 4716L 1/2" 2" .11 *5226H 13⁄16" 1-3/16" .14
*4716 1/2" 7/8" .04 4718L 9/16" 2" .15 *5228H 7⁄8" 1-5/16" .19
4718 9/16" 7/8" .06 5230H 15⁄16" 1-5⁄16" .26
Fed'l Specs.: GGG-W-641E 5232H 1" 1-3⁄8" .30
*Fed'l Specs.: GGG-W-641E ANSI Spec.: B107.1
ANSI Spec.: B107.1 *Fed'l Specs.: GGG-W-641E
*ANSI Spec.: B107.1
STANDARD LENGTH SOCKETS—12 POINT METRIC DEEP LENGTH SOCKETS—6 POINT
STANDARD LENGTH SOCKETS—12 POINT
No. No. No.
*4706T 3/16" 7/8" .02 4704LM 4 50.5 19.3 *5208 1⁄4" 1-3⁄32" .05
*4707T 7/32" 7/8" .02 4705LM 5 50.5 19.3 *5210 5⁄16" 1-3⁄32" .05
*4708T 1/4" 7/8" .02
47055LM 5.5 50.5 19.3 *5212 3⁄8" 1-3⁄32" .05
*4709T 9/32" 7/8" .02
4706LM 6 50.5 18.2 *5214 7⁄16" 1-3⁄32" .05
*4710T 5/16" 7/8" .02
4707LM 7 50.5 18.2 *5216 1⁄2" 1-1⁄8" .06
*4711T 11/32" 7/8" .02
4708LM 8 50.5 27.2 *5218 9⁄16" 1-1⁄8" .09
*4712T 3/8" 7/8" .03
*5220 5⁄8" 1-1⁄8" .10
*4714T 7/16" 7/8" .03 4709LM 9 50.5 27.2
*5222 11⁄16" 1-1⁄8" .12
*4716T 1/2" 7/8" .04 4710LM 10 50.5 31.8 *5224 3⁄4" 1-3⁄16" .15
4718T 9/16" 7/8" .06 4711LM 11 50.5 40.9 *5226 13⁄16" 1-3⁄16" .14
*Fed'l Specs.: GGG-W-641E 4712LM 12 50.5 49.9 *5228 7⁄8" 1-5⁄16" .19
ANSI Spec.: B107.1 4713LM 13 50.5 68.1 5230 15⁄16" 1-5⁄16" .26
4714LM 14 50.5 68.1 5232 1" 1-3⁄8" .30
STANDARD LENGTH RATCHET
ANSI Spec.: B107.5 *Fed'l Specs.: GGG-W-641E
*ANSI Spec.: B107.1
UNIVERSAL JOINT
+ Quick Release ++ Rubber Grip DEEP LENGTH SOCKETS—6 POINT
No. Finish No. No.
4749 5" .24 Chrome 4770 1-5/16 .04 *5008H 1⁄4" 2-1⁄64" .08
4749Q+ 5" .24 Chrome Fed’l Specs.: GGG-W-641E *5010H 5⁄16" 2-1⁄64" .09
4749H++ 5” .24 Chrome ANSI Spec.: B107.10M *5012H 3⁄8" 2-1⁄64" .09
AS 4283 *5014H 7⁄16" 2-1⁄64" .09
14RK Repair Kit
*5016H 1⁄2" 2-1⁄64" .10
Fed'l Specs.: GGG-W-641E • ANSI Spec.: B107.10M *5018H 9⁄16" 2-1⁄64" .16
*5020H 5⁄8" 2-3⁄4" .18
STANDARD LENGTH ROUND HEAD RATCHET SOCKETS AND ACCESSORIES *5022H 11⁄16" 2-3⁄4" .20
3/8" Square Drive *5024H 3⁄4" 2-3⁄4" .23
*5026H 13⁄16" 2-3⁄4" .28
METRIC DEEP LENGTH SOCKETS—12 POINT *5028H 7⁄8" 2-3⁄4" .30
5030H 15⁄16" 2-3⁄4" .32
No. Finish 5032H 1" 2-3⁄4" .32
No.
4752A 5-1/8" .24 Chrome
5006M 6 54.0 39.8 *Fed'l Specs.: GGG-W-641E
Fed'l Specs.: GGG-W-641E • ANSI Spec.: B107.10M *ANSI Spec.: B107.1
5007M 7 54.0 39.8
HINGE HANDLE 5008M 8 54.0 39.8 DEEP LENGTH SOCKETS—12 POINT
5009M 9 54.0 40.9
5010M 10 54.0 40.9 No.
5011M 11 54.0 40.9 *5008 1⁄4" 2-1⁄8" .08
No.
5012M 12 54.0 45.4 *5010 5⁄16" 2-1⁄8" .08
4766 5-3⁄4" .22 *5012 3⁄8" 2-1⁄8" .09
Fed'l Specs.: GGG-W-641E • ANSI Spec.: B107.10M 5013M 13 54.0 59.0
*5014 7⁄16" 2-1⁄8" .09
AS 4283 5014M 14 54.0 63.6 *5016 1⁄2" 2-1⁄8" .10
5015M 15 69.9 68.1 *5018 9⁄16" 2-1⁄8" .16
SLIDING TEE HANDLE 5016M 16 69.9 68.3 *5020 5⁄8" 2-3⁄4" .18
5017M 17 69.9 68.6 *5022 11⁄16" 2-3⁄4" .20
5018M 18 69.9 85.3 *5024 3⁄4" 2-3⁄4" .23
5019M 19 69.9 95.3 *5026 13⁄16" 2-3⁄4" .28
5020M 20 69.9 113.3 5030 15⁄16" 2-3⁄4" .32
No. 5032 1" 2-3⁄4" .32
4785 4-1⁄2" .08 ANSI Spec.: B107.5
*Fed'l Specs.: GGG-W-641E
Fed'l Specs.: GGG-W-641E • ANSI Spec.: B107.10M *ANSI Spec.: B107.1

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
0539-04 5/3/06 10:18 AM Page 1

531-06

URREA PROFESSIONAL TOOLS, INC.


HAND SOCKETS AND ACCESSORIES – 3/8" Square Drive HAND SOCKETS & ACCESSORIES
Meet Federal, ANSI, and SAE Specifications 1/2" Square Drive
STANDARD LENGTH PEAR HEAD RATCHET STANDARD EXTENSION DEEP LENGTH SOCKETS—6 POINT

No.
5312H 3⁄8" 3-1⁄4" .30
5314H 7⁄16" 3-1⁄4" .30
5316H 1⁄2" 3-1⁄4" .31
No. Finish No.
5318H 9⁄16" 3-1⁄4" .31
5249Q+ 7" .6 Chrome 5260 3" .15
5320H 5⁄8" 3-1⁄4" .31
5249 7" .6 Chrome 5260-06 6" .29
5322H 11⁄16" 3-1⁄4" .33
5249H++ 7" .6 Chrome 5261 8" .39
5324H 3⁄4" 3-1⁄4" .40
+ Quick Release ++ Rubber Grip 5262 12" .61
5326H 1-3⁄16" 3-1⁄4" .43
5263 17-3⁄16" .90
5328H 7⁄8" 3-1⁄4" .54
5330H 15⁄16" 3-1⁄4" .65
STANDARD LENGTH ROUND HEAD RATCHET 5332H 1" 3-1⁄4" .71
UNIVERSAL JOINT 5334H 1-1⁄16" 3-1⁄4" .72
5336H 1-1⁄8" 3-1⁄4" .74
No. 5340H 1-1⁄4" 3-1⁄4" 1.02
5270 1-15/16" .10 5348H 1-1⁄2" 3-1⁄2" 1.58

No.
5252A 7-1⁄2" .66 DEEP LENGTH SOCKETS—12 POINT
HINGE HANDLE
No.
5316 1⁄2" 3-1⁄4" .29
5318 9⁄16" 3-1⁄4" .29
ADAPTERS No. Finish 5320 5⁄8" 3-1⁄4" .32
5265H++ 8-1/2" .54 Chrome 5322 11⁄16" 3-1⁄4" .32
++ Rubber Grip 5324 3⁄4" 3-1⁄4" .36
5326 13⁄16" 3-1⁄4" .41
SLIDING TEE HANDLE
5328 7⁄8" 3-1⁄4" .53
5330 15⁄16" 3-1⁄4" .55
5332 1" 3-1⁄4" .67
No. Sizes
5334 1-1⁄16" 3-1⁄4" .68
5253 3/8"F x 1/2"M 1-5/32" .08
5336 1-1⁄8" 3-1⁄4" .70
5254 1/2"F x 3/8"M 1-13/32" .12
No. 5340 1-1⁄4" 3-1⁄4" .96
5255 3/8"F x 1/4"M 1" .06
5256 1/4"F x 3/8"M 15/16" .03 5285 8" .31

No. 5200A METRIC DEEP LENGTH SOCKETS—12 POINT


No. 5200M 27-PIECE COMBINATION SET OF 1/4" & 3/8"
21-PIECE SET OF 3/8" METRIC SOCKETS SQUARE DRIVE SOCKETS AND ACCESSORIES – No.
6 Point 5310M 10 82.5 .11
AND ACCESSORIES – 12 Point
5311M 11 82.5 .11
5312M 12 82.5 .11
5313M 13 82.5 .12
5314M 14 82.5 .13
5315M 15 82.5 .13
5316M 16 82.5 .14
Set includes: 5317M 17 82.5 .14
1/4" SQUARE DRIVE 5318M 18 82.5 .16
5319M 19 82.5 .16
Standard sockets – 3/16", 7/32", 1/4", 9/32", 5/16",
5320M 20 82.5 .20
11/32", 3/8", 7/16", & 1/2"
5321M 21 82.5 .21
Set includes: Square drive screwdriver handle
5322M 22 82.5 .23
Standard length sockets – 7mm, 8mm, 9mm, 3/8" SQUARE DRIVE 5323M 23 82.5 .23
10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 5324M 24 82.5 .23
Standard sockets – 9/16", 5/8", 11/16", 3/4", 13/16",
16mm, 17mm, 18mm, & 19mm 5325M 25 82.5 .28
7/8", 15/16", 1"
Spark plug socket – 5/8" 5326M 26 82.5 .28
Spark plug socket – 5/8"
Reversible ratchet – 7” length 5327M 27 82.5 .29
Reversible ratchet – 7” length
Extensions – 3" & 8" lengths 5328M 28 82.5 .30
Adapters – 3/8" F x 1/4" M and 1/4" F x 3/8" M
Jointed handle – 7-15/16" length 5329M 29 82.5 .30
Extensions – 8" & 12" lengths 5330M 30 82.5 .31
Universal joint – 1-15/16" length
Hinge handle – 7-15/16" length 5331M 31 82.5 .33
Speed handle – 16-7/8" length
Universal joint – 1-15/16" length 5332M 32 82.5 .33
Metal box – 18-14/64" x 5-45/64" x 3"
Metal box – 15" x 6-11/16" x 2"

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
0540-04 5/3/06 10:19 AM Page 1

532-06

Warning: URREA PROFESSIONAL TOOLS, INC.


Do not use hand HAND SOCKETS AND ACCESSORIES – 1/2" Square Drive
sockets or adapters on Meet Federal, ANSI, and SAE Specifications
impact guns.

STANDARD LENGTH PEAR HEAD RATCHET ROUND FLEX HEAD RATCHET STANDARD LENGTH ROUND HEAD RATCHET

• 180° flex
No. Finish
No. Finish 5452A 10" 1.26 Chrome
No.
5449Q+ 10" 1.3 Chrome 5452ABL 10-1/8" 1.26 Black
5457 13" 1.70
5449 10" 1.3 Chrome
5449H++ 10" 1.3 Chrome
UNIVERSAL JOINT
+ Quick Release ++ Rubber Grip

METRIC DEEP LENGTH SOCKETS—6 POINT STANDARD LENGTH SOCKETS—12 POINT No.
5470 2-5⁄8" .27
No. No.
5310HM 10 76.2 .30 5408 1/4" 1-7/16" .09
5311HM 11 76.2 .24 5410 5/16" 1-7/16" .10
5312HM 12 76.2 .28 5412 3⁄8" 1-1/2" .11
5313HM 13 76.2 .29 5414 7⁄16" 1-1/2" .12 HINGE HANDLE
5314HM 14 76.2 .29 5416 1⁄2" 1-1/2" .12
5315HM 15 76.2 .27 5417 17/32" 1-1/2" .13
5316HM 16 76.2 .24 5418 9⁄16" 1-1⁄2" .13
5317HM 17 76.2 .30 5419 19⁄32" 1-1⁄2" .17
5420 5⁄8" 1-1⁄2" .17 No.
5318HM 18 76.2 .38
5422 11⁄16" 1-1⁄2" .18 5466 10-7⁄8" 1.14
5319HM 19 76.2 .36
5424 3⁄4" 1-1⁄2" .21 5467 15-3⁄4" 1.52
5320HM 20 79.3 .37
5321HM 21 79.3 .38 5425 25⁄32" 1-1⁄2" .23 5468 18-5⁄8" 1.72
5322HM 22 79.3 .40 5426 13⁄16" 1-1⁄2" .23
5323HM 23 79.3 .42 5428 7⁄8" 1-1/2" .29 SPEED HANDLE
5324HM 24 79.3 .43 5429 29⁄32" 1-1/2" .28
5325HM 25 79.3 .45 5430 15⁄16" 1-1/2" .31
5326HM 26 79.3 .47 5431 31⁄32" 1-9⁄16" .34
5327HM 27 79.3 .50 5432 1" 1-9⁄16" .36
5434 1-1⁄16" 1-5⁄8" .42
5436 1-1⁄8" 1-3⁄4" .47
METRIC STANDARD LENGTH SOCKETS—12 POINT
5438 1-3⁄16" 1-3⁄4" .60
5440 1-1⁄4" 1-3/4" .55 No.
No. 5480 18" 1.6
5408M 8 38.1 .09
5409M 9 38.1 ,10
5410M 10 38.1 .11 SLIDING TEE HANDLE
5411M 11 38.1 .12 STANDARD LENGTH SOCKETS—6 POINT
5412M 12 38.1 .13
5413M 13 38.1 .15 No.
5414M 14 38.1 .14 5408H 1/4" 1-1/2" .10 No.
5415M 15 38.1 .17 5410H 5/16" 1-1/2" .11
5416M 16 38.1 .15 5485 12-15⁄16" 1.48
5412H 3⁄8" 1-1/2" .12
5417M 17 38.1 .19 5414H 7⁄16" 1-1/2" .12
5418M 18 38.1 .21 5416H 1⁄2" 1-1/2" .13
STANDARD EXTENSION
5419M 19 38.1 .20 5418H 9⁄16" 1-1⁄2" .13
5420M 20 38.1 .23 5419H 19/32" 1-1/2" .15
5421M 21 38.1 .22 5420H 5⁄8" 1-1⁄2" .17
5422M 22 38.1 .30 5422H 11⁄16" 1-1⁄2" .18 No. Finish
5423M 23 38.1 .28 5424H 3⁄4" 1-1⁄2" .19 5460 2-1⁄2" .23 Chrome
5424M 24 38.1 .27 5425H 25/32" 1-1/2" .19
5425M 25 39.6 .20 5461 5" .45 Chrome
5426H 13⁄16" 1-1⁄2" .23
5426M 26 39.6 .36 5463 10" .90 Chrome
5428H 7⁄8" 1-1/2" .30
5427M 27 41.2 .43 5430H 15⁄16" 1-1/2" .28
5428M 28 44.4 .49 5432H 1" 1-9⁄16" .36 ADAPTERS
5429M 29 44.4 .45 5434H 1-1⁄16" 1-5/8" .44
5430M 30 44.4 .53 5436H 1-1⁄8" 1-3⁄4" .54 No.
5431M 31 44.4 .54 5438H 1-3⁄16" 1-3⁄4" .59 5253 3⁄8" F x 1⁄2" M 7/32" .08
5432M 32 44.4 .55 5440H 1-1⁄4" 1-3/4" .59 5254 1⁄2" F x 3⁄8" M 1-3⁄8" .12
5434M 34 53.9 .57 5448H 1-1⁄2" 2-1⁄8" .78 5653 1/2" F x 3/8" M 1-21/32" .24
5436M 36 55.5 .61 5453 3/4" F x 1/2" M 2-1/8" .39

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
0541-04 5/3/06 10:19 AM Page 1

533-06

Warning: Do not use


URREA PROFESSIONAL TOOLS, INC.
hand sockets or adapters HAND SOCKETS AND ACCESSORIES – 3/4" Square Drive
on impact guns.
Meet Federal, ANSI, and SAE Specifications
STANDARD LENGTH SOCKETS—12 POINT METRIC STANDARD LENGTH SOCKETS—12 POINT DEEP LENGTH SOCKETS—6 POINT

No. No. No.


5524 3⁄4" 2" .39 5519M 19 49.2 0.40 5528HL 7⁄8" 3-1⁄2" .75
5526 13⁄16" 2" .37 5520M 20 49.2 0.45 5530HL 15⁄16" 3-1⁄2" .75
5528 7⁄8" 2" .44 5521M 21 49.2 0.49 5532HL 1" 3-1⁄2" .83
5530 15⁄16" 2" .53 5522M 22 49.2 0.51 5534HL 1-1⁄16" 3-1⁄2" .99
5532 1" 2" .58 5523M 23 49.2 0.54 5536HL 1-1⁄8" 3-1⁄2" 1.09
5534 1-1⁄16" 2" .59 5524M 24 49.2 0.56 5538HL 1-3/16" 3-1/2" 1.16
5536 1-1⁄8" 2-1/4" .71 5525M 25 50.8 0.63 5540HL 1-1⁄4" 3-1⁄2" 1.36
5538 1-3⁄16" 2-1/4" .73 5526M 26 50.8 0.65 5542HL 1-5⁄16" 3-1⁄2" 1.43
5540 1-1⁄4" 2-1/4" .81 5527M 27 53.9 0.71 5544HL 1-3⁄8" 3-1⁄2" 1.04
5542 1-5⁄16" 2-3/8" .93 5528M 28 55.5 0.74 5546HL 1-7⁄16" 3-1⁄2" 1.13
5544 1-3⁄8" 2-3/8" 1.04 5529M 29 57.1 0.79 5548HL 1-1⁄2" 3-1⁄2" 1.14
5546 1-7⁄16" 2-1/2" 1.13 5530M 30 57.1 0.83 5550HL 1-9/16" 3-1/2" 1.48
5548 1-1⁄2" 2-1/2" 1.16 5531M 31 57.1 0.89 5552HL 1-5⁄8" 3-1⁄2" 2.02
5550 1-9⁄16" 2-5⁄8" 1.36 5532M 32 57.1 0.95
5552 1-5⁄8" 2-5⁄8" 1.47 5533M 33 63.5 1.00 STANDARD LENGTH RATCHET
5554 1-11⁄16" 2-3⁄4" 1.76 5534M 34 63.5 1.04 • Unique 24 tooth gear/floating pawl design provides 15˚
5556 1-3⁄4" 2-3⁄4" 1.65 5535M 35 66.6 1.05 ratcheting angle while maximizing ultimate torque.
5558 1-13⁄16" 2-7/8" 1.82 5536M 36 66.6 1.21 • Thin head design for access into tight work areas.
5560 1-7⁄8" 3" 2.75 5538M 38 66.6 1.45 • Reversing level designed for quick, one hand operations.
5564 2" 3-1/8" 2.75 5540M 40 66.6 1.56
5566 2-1⁄16" 3-1/2" 2.75 5541M 41 66.6 1.63
5568 2-1⁄8" 3-1/2" 3.03 5542M 42 66.6 1.81
5570 2-3⁄16" 3-1/2" 3.25 5544M 44 82.5 1.99
5572 2-1⁄4" 3-1/2" 3.46 5546M 46 82.5 2.25 No. Finish
5574 2-5/16" 3-1/2" 3.71 5550M 50 82.5 2.51 5649 20" 6.10 Chrome
5576 2-3⁄8" 3-1/2" 3.97 5554M 54 82.5 2.71 5649H+ 20" Chrome
5555M 55 82.5 2.89 5649Q++ 20" Chrome
UNIVERSAL JOINT 5558M 58 82.5 3.01
5560M 60 82.5 3.12 + Quick Release ++ Rubber Grip
No.
SLIDING TEE HANDLE STANDARD EXTENSION
5670 3-39⁄64" .91

No. No.
5685 18" 2.98 5660 4" .86
ADAPTERS
5661 8" 1.34
ELL HANDLE
No. 5663 16" 2.38
5653 1⁄2" F x 3⁄4" M 1-19⁄32" .24
HINGE HANDLE
5453 3⁄4" F x 1⁄2" M 21⁄8" .39
5853 3⁄4" F x 1" M 21⁄2" .90
5854 1" F x 3⁄4" M 27⁄8" 1.29 No.
5686 16" 3.93
1/2" TORX® TIP SOCKETS 24-PIECE SOCKET SETS – 12 Point No. Finish
No. 5500C 5668 20" 4.30 Chrome
5668H++ 20" 4.30 Chrome
++ Rubber Grip

12-PIECE SOCKET SETS – 12 Point


Set includes: No. 5500NR
No. Tip Size Tip Total Standard sockets – 3/4", 13/16", 7/8", 15/16", 1", Set includes:
543920W T20 1-3/4" 3-1/4" .15 1-1/16" 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", Standard sockets – 1-1/16" 1-1/8", 1-1/4", 1-5/16",
543925W T25 1-3/4" 3-1/4" .15 1-7/16", 1-1/2", 1-9/16", 1-5/8", 1-11/16", 1-3/4" 1-7/16", 1-1/2", 1-5/8", 1-3/4"
543930W T30 1-3/4" 3-1/4" .15
Reversible ratchet – 20" length Reversible ratchet – 20" length
543940W T40 1-3/4" 3-1/4" .14
543945W T45 1-7/8"" 3-5/8" .18
Extensions – 8" & 16" lengths Extension –
543950W T50 1-7/8" 3-5/8" .18 Hinge handle – 20-3/16" length 8" length
543955W T55 2" 4" .22 Universal joint – 3-3/4" length Sliding T bar –
“L” handle – 16" length 18" length
Metal box Metal box

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
0542-04 5/3/06 10:20 AM Page 1

534-06

URREA PROFESSIONAL TOOLS, INC.


1/2" SQUARE DRIVE IMPACT SOCKETS
Meet Federal, ANSI, and SAE Specifications
STANDARD LENGTH SOCKETS—6 POINT METRIC STANDARD LENGTH SOCKETS—6 POINT METRIC DEEP LENGTH SOCKETS—6 POINT

No. No. No.


7412H 3⁄8" 1-1⁄2" .15 7409M 9 38.1 .15 7308M 8 82.5 .29
7414H 7⁄16" 1-1⁄2" .15 7410M 10 38.1 .15 7309M 9 82.5 .30
7416H 1⁄2" 1-1⁄2" .18 7411M 11 38.1 .15 7310M 10 82.5 .31
7418H 9⁄16" 1-1⁄2" .18 7412M 12 38.1 .18 7311M 11 82.5 .32
7420H 5⁄8" 1-1⁄2" .21 7413M 13 38.1 .18 7312M 12 82.5 .36
7422H 11⁄16" 1-1⁄2" .23 7414M 14 38.1 .18 7313M 13 82.5 .36
7424H 3⁄4" 1-1⁄2" .25 7415M 15 38.1 .22 7314M 14 82.5 .37
7416M 16 38.1 .22
7426H 13⁄16" 1-1/2" .27 7315M 15 82.5 .38
7417M 17 38.1 .25
7428H 7⁄8" 1-1/2" .35 7316M 16 82.5 .39
7418M 18 38.1 .27
7430H 15⁄16" 1-3⁄4" .45 7317M 17 82.5 .44
7419M 19 38.1 .27
7432H 1" 1-3⁄4" .49 7420M 20 38.1 .26 7318M 18 82.5 .42
7434H 1-1⁄16" 2" .57 7421M 21 38.1 .39 7319M 19 82.5 .46
7436H 1-1⁄8" 2" .82 7422M 22 38.1 .39 7320M 20 82.5 .54
7438H 1-3⁄16" 2" .85 7423M 23 44.4 .49 7321M 21 82.5 .54
7440H 1-1⁄4" 2" .87 7424M 24 44.4 .49 7322M 22 88.9 .74
7442H 1-5⁄16" 2" .92 7425M 25 44.4 .54 7323M 23 88.9 .81
7444H 1-3⁄8" 2-1⁄8" .96 7426M 26 50.8 .63 7324M 24 88.9 .84
7446H 1-7⁄16" 2-1/4" 1.01 7427M 27 50.8 .63 7325M 25 88.9 .91
7448H 1-1⁄2" 2-1/4" 1.09 7428M 28 50.8 .73 7326M 26 88.9 1.03
7429M 29 50.8 .76 7327M 27 88.9 1.05
DEEP LENGTH SOCKETS—6 POINT 7430M 30 50.8 .83 7328M 28 88.9 1.07
7432M 32 50.8 .85 7329M 29 88.9 1.07
No. 7433M 33 50.8 .87 7330M 30 88.9 1.07
7312H 3⁄8" 3-1/16" .16 7434M 34 50.8 .93 7332M 32 88.9 1.09
7314H 7⁄16" 3-1/16" .16 7436M 36 50.8 1.08
7334M 34 88.9 1.10
7316H 1⁄2" 3-1/16" .18 7335M 35 88.9 1.12
7318H 9⁄16" 3-1/16" .18 7336M 36 88.9 1.12
7320H 5⁄8" 3-1/16" .20 EXTENSIONS
7322H 11⁄16" 3-1/16" .20 ADAPTERS
7324H 3⁄4" 3-1/4" .33 No.
7326H 13⁄16" 3-1/4" .44 7650 3⁄8" F x 1⁄2" M 1-5⁄16" .12
7328H 7⁄8" 3-1/4" .44 No.
7651 1⁄2" F x 3⁄8" M 1-7⁄16" .18
7330H 15⁄16" 3-7/16" .45 7180P 2" .23
7652 1⁄2" F x 3⁄4" M 2-1/8" .35
7332H 1" 3-7/16" .52 7181P 5" .52
7653 3⁄4" F x 1⁄2" M 2-1/8" .35
7334H 1-1⁄16" 3-7/16" .71 7184P 9" .88
7655 5⁄8" F x 1⁄2" M 1-7/8" .32
7336H 1-1⁄8" 3-7/16" .80
15-PIECE SET OF METRIC UNIVERSAL JOINT
STANDARD IMPACT SOCKETS – No. 74204M • Patented “Pinless” design for greater
15-PIECE SET OF STANDARD IMPACT SOCKETS 1/2" Square Drive – 6 Point safety and durability.
No. 74104 – 1/2" Square Drive – 6 Point Set includes: No.
Set includes: Sizes – 10mm, 11mm, 12mm, 13mm, 14mm 15mm, 7470P 2-15⁄16" .58
Sizes – 3/8", 7/16", 1/2", 916", 5/8", 11/16, 3/4", 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm,
13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4" 23mm, 24mm 7-PIECE SET OF STANDARD AND DEEP
9" rail for clips and sockets (2) 9" rail for clips & sockets (2) IMPACT SOCKETS – 1/2" Square Drive – 6 Point
Socket clip Socket clip No. 7400CA
Set includes:
Standard Sizes – 1/2", 9/16", 5/8", 11/16"
Deep Sizes – 3/4", 13/16", 7/8"
Rail for clips and sockets
15-PIECE SET OF METRIC Socket clip
DEEP IMPACT SOCKETS – No. 73214M
11-PIECE SET OF DEEP IMPACT SOCKETS 1/2" Square Drive – 6 Point
No. 73112 – 1/2" Square Drive – 6 Point Set includes: 7-PIECE SET OF METRIC STANDARD AND
Set includes: Sizes – 10mm, 11mm, 12mm, 13mm, 14mm 15mm, DEEP IMPACT SOCKETS – No. 7400CAM
Sizes – 1/2", 916", 5/8", 11/16, 3/4", 13/16", 7/8", 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 1/2" Square Drive – 6 Point
15/16", 1", 1-1/16", 1-1/8" 23mm, 24mm Set includes:
9" rail for clips and sockets 9" rail for clips and sockets (2) Standard Sizes – 13mm, 14mm, 15mm, 16mm,
Socket clip Socket clip &18mm
Deep Sizes – 17mm & 21mm
Rail for clips and sockets
Socket clip

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
0543-04 5/3/06 10:21 AM Page 1

535-06

URREA PROFESSIONAL TOOLS, INC.


3/4" SQUARE DRIVE IMPACT SOCKETS
Meet Federal, ANSI, and SAE Specifications
STANDARD LENGTH SOCKETS—6 POINT DEEP LENGTH SOCKETS—6 POINT 10-PIECE SET OF STANDARD LENGTH IMPACT
SOCKETS – 3/4" Square Drive – 6 Point
No. No. No. 750010
7508 1/2" 1-15/16" .57 7508L 1/2" 3" 1.20
7509 9⁄16" 1-15⁄16" .65 7509L 9⁄16" 3" 1.23 Set includes:
7510 5⁄8" 1-15⁄16" .69 7510L 5⁄8" 3" 1.25 Sizes – 3/4", 13/16", 7/8", 15/16", 1”, 1-1/16", 1-1/8",
7511 11⁄16" 1-15⁄16" .73 7511L 11⁄16" 3" 1.26 1-3/16" 1-1/4", & 1-5/16"
7512 3⁄4" 1-15⁄16" .70 7512L 3⁄4" 3" 1.26 Corrugated case
7513 13⁄16" 1-15⁄16" .71 7513L 13⁄16" 3" 1.27
7514 7⁄8" 1-15⁄16" .78 7514L 7⁄8" 3" 1.29
7515 15⁄16" 2" .78 7515L 15⁄16" 3" 1.30
7516 1" 2" .92 7516L 1" 3" 1.32 10-PIECE SET OF DEEP LENGTH IMPACT SOCKETS
7517 1-1⁄16" 2-1⁄16" .92 7517L 1-1/16" 3" 1.34 3/4" Square Drive – 6 Point
7518 1-1⁄8" 2-3⁄16" .88 7518L 1-1⁄8" 3" 1.35 No. 750010L
7519 1-3⁄16" 2-1/8" 1.03 7519L 1-3⁄16" 3-1⁄4" 1.55
7520 1-1⁄4" 2-3⁄16" 1.15 7520L 1-1⁄4" 3-1⁄4" 1.68 Set includes:
7521 1-5⁄16" 2-3⁄16" 1.18 7521L 1-5⁄16" 3-1⁄4" 1.74 Sizes – 3/4", 13/16", 7/8", 15/16", 1”, 1-1/16", 1-1/8",
7522 1-3⁄8" 2-1⁄4" 1.31 7522L 1-3⁄8" 3-1⁄4" 1.79 1-3/16" 1-1/4", & 1-5/16"
7523 1-7⁄16" 2-5⁄16" 1.44 7523L 1-7⁄16" 3-1⁄4" 2.10 Corrugated case
7524 1-1⁄2" 2-1/4" 1.52 7524L 1-1⁄2" 3-1⁄2" 2.25
7525 1-9⁄16" 2-5/8" 1.67 7525L 1-9⁄16" 3-1⁄2" 2.32
7526 1-5⁄8" 2-5/8" 1.78 7526L 1-5⁄8" 3-1⁄2" 2.45
7527 1-11⁄16" 2-5⁄8" 1.86 7527L 1-11⁄16" 3-1⁄2" 2.57 15-PIECE SET OF METRIC STANDARD LENGTH
7528 1-3⁄4" 2-5⁄8" 1.92 7528L 1-3⁄4" 3-1⁄2" 2.65 IMPACT SOCKETS – 3/4" Square Drive – 6 Point
7529 1-13⁄16" 2-5⁄8" 2.04 7529L 1-13⁄16" 3-1⁄2" 2.78 No. 750015M
7530 1-7⁄8" 2-3⁄4" 2.11 7530L 1-7⁄8" 3-1⁄2" 2.89
7531 1-15⁄16" 2-3⁄4" 2.19 7531L 1-15/16" 3-1⁄2" 3.05 Set includes:
Sizes – 17mm, 19mm, 20mm, 21mm, 22mm, 23mm,
24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm,
31mm, & 32mm
METRIC STANDARD LENGTH SOCKETS—6 POINT METRIC DEEP LENGTH SOCKETS—6 POINT Corrugated case
No. No.
7517M 17 49.3 .70 7519ML 19 76.2 1.26
7519M 19 49.3 .82
7520ML 20 76.2 1.32
7520M 20 53.9 .90 11-PIECE SET OF DEEP LENGTH IMPACT SOCKETS
7521ML 21 76.2 1.45
7521M 21 53.9 .96 3/4" Square Drive – 6 Point
7522ML 22 76.2 1.50
7522M 22 53.9 1.03 No. 750011ML
7523M 23 53.9 1.09 7523ML 23 76.2 1.62
7524M 24 60.3 1.15 7524ML 24 76.2 1.74
7525ML 25 76.2 1.83 Set includes:
7525M 25 60.3 1.21
7526ML 26 76.2 1.92 Sizes – 19mm, 20mm, 21mm, 22mm, 23mm, 24mm,
7526M 26 60.3 1.27
7527ML 27 76.2 1.98 25mm, 26mm, 27mm, 30mm, & 32mm
7527M 27 60.3 1.33
7528M 28 63.5 1.40 7530ML 30 82.5 2.10 Corrugated case
7529M 29 63.5 1.46 7532ML 32 82.5 2.19
7530M 30 63.5 1.50 7533ML 33 82.5 2.23
7531M 31 63.5 1.58 7534ML 34 82.5 2.35
7532M 32 63.5 1.62 7535ML 35 82.5 2.40
7533M 33 63.5 1.68 7536ML 36 82.5 2.48
7534M 34 66.6 1.72 7537ML 37 82.5 2.53
7535M 35 66.6 1.78 7538ML 38 88.9 2.64
7536M 36 66.6 1.85 UNIVERSAL JOINT
No.
ADAPTERS EXTENSIONS 7570 4-1/8" 1.56

No.
7653 3/4"F x 1/2"M 2-3/16" .35
7655 3⁄4"F x 1"M 1-53⁄64" .87

No.
7565 5" 1.60
7567 7" 2.06
7568 10" 2.71
7569 13" 3.35

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
3027 5/3/06 10:22 AM Page 642

536-06

URREA PROFESSIONAL TOOLS, INC.


TORX® TIP PHILLIPS TIP
ROUND SHANK SCREWDRIVERS ROUND SHANK
Tip Width Total Length Torque Tip Total Length Screw
Code Type Code Size
in mm in mm lb-in Size in mm
9310W T10 1/4 6.3 8 203 40 9680 0 5-1/4 133 0
9315W T15 1/4 6.3 8 203 76 FLAT TIP, SQUARE SHANK 9689 0 10-3/4 260 0
9320W T20 1/4 6.3 8 203 112 9682 1 6-3/8 162 1
9325W T25 1/4 6.3 8 203 221 Tip Width Total Length Screw 9683 1 11-3/8 289 1
Code
9327W T27 1/4 6.3 8 203 265 in mm in mm Size 9684 2 8-1/4 210 2
9330W T30 1/4 6.3 8 203 331 9803 1/4 6.3 7 178 10,12 9685 2 12 305 2
9804 1/4 6.3 8 204 10,12 9686 3 10-3/8 264 3
9816 1/4 6.3 10 254 10,12 9687 2 9-15/16 252 2
HEX NUT DRIVER TIP 9842 1/4 6.3 13 330 10,12
FRACTIONAL SIZES 9688 4 13 330 4
9805 5/16 7.9 9-3/8 238 12,14,16
Tip Size Total Length Handle 9806 5/16 7.9 10-3/8 263 12,14,16
Code CABINET TIP
in mm in mm Color
9843 5/16 7.9 14-3/8 365 12,14,16 ROUND SHANK
9206 3/16 4.7 7 178 Black 9808 3/8 9.5 13 330 16,18,20
9208 1/4 6.3 7 178 Red Tip Width Total Length Screw
9810 3/8 9.5 15 381 16,18,20 Code
9210 5/16 7.9 7 178 Amber in mm in mm Size
9812 3/8 9.5 17 432 16,18,20 9622 1/8 3.1 5-1/4 133 2,3,4,5
9212 3/8 9.5 7 178 Blue
9623 1/8 3.1 5-3/4 146 2,3,4,5
9214 7/16 11.1 7-3/8 187 Brown
9624 1/8 3.1 6-3/4 171 2,3,4,5
9216 1/2 12.7 7-3/8 187 Red
9625 1/8 3.1 7-3/4 197 2,3,4,5
9218 9/16 14.2 7-3/8 187 Red
FLAT TIP, ROUND SHANK 9626 1/8 3.1 8-3/4 222 2,3,4,5
Tip Width Total Length Screw 9627 1/8 3.1 10-3/4 273 2,3,4,5
STUBBY TYPE Code
in mm in mm Size 9631 3/16 4.7 6-3/8 162 6,7,8,9
FLAT TIP, ROUND SHANK 9632 3/16 4.7 7-3/8 187 6,7,8,9
Tip Width Total Length Screw 9602 3/16 4.7 7-3/8 187 6,7,8,9
Code 9633 3/16 4.7 8-3/8 213 6,7,8,9
in mm in mm Size 9604 1/4 6.3 8 203 10,12
9634 3/16 4.7 9-3/8 238 6,7,8,9
9652 1/4 6.3 3-17/32 89.7 10,12 9616 1/4 6.3 10 254 12,14,16
9606 5/16 7.9 10-3/8 263 16,18,20 90° CENTER
PHILLIPS TIP, ROUND SHANK 9643 5/16 7.9 14-3/8 365 10,12 PUNCHES
Tip Total Length Screw 9608 3/8 9.5 13 330 12,14,16 Tip Diam. Bar Diam. Length
Code Code
Size in mm Size in mm in mm in mm
9671 2 3-13/32 86 2 41-1/4” 5/64 1.9 1/4 6.3 4-1/4 108
41-5/16” 3/32 2.3 5/16 7.9 4-5/8 117
AVIATION CUTTING SNIPS 41-3/8” 1/8 3.1 3/8 9.5 4-7/8 124
Handle Cut Length Total Length 41-7/16” 5/32 3.9 7/16 11.1 5-1/4 133
Code Description
Color in mm in mm 303U
41-1/2” 3/16 4.7 1/2 12.7 5-5/8 143
303U Multi-Purpose Red 1-3/4 44 10-1/32 255 41-5/8” 5/16 5.9 5/8 15.8 6-1/4 159
303B Universal Bulldog Yellow 1 25 9-1/2 241 50° PRICK
303S Straight Cut Yellow 1-3/4 45 10 254 PUNCHES
303R Right Cut Green 1-5/8 41 10 254 Tip Diam. Bar Diam. Length
303L Left Cut Red 1-5/8 41 10 254 303B Code
in mm in mm in mm
303RS Bent Right Cut Green 1-5/8 41 10 254 44-1/4” 3/32 2.3 1/4 6.3 4-3/4 120
303LS Bent Left Cut Red 1-5/8 41 10 254 44-5/16” 7/64 2.7 5/16 7.9 5 127
44-3/8” 1/8 3.1 3/8 9.5 5-1/4 133
COOPER WIRE SNIPS BASS DRIVE
303R
For 8mm & 10mm Gauge Wire PIN PUNCHES
Total Length Tip Diam. Bar Diam. Length
Code Code
in mm in mm in mm in mm
288G 7-1/2 191 303LS 49920 3/4 19.0 3/4 19.0 8 20
288G
49922 1/2 12.7 1/2 12.7 7 17
PVC PIPE SNIPS – Red Handle
Cut Length Total Length DRIVE PIN PUNCHES
Code
in mm in mm Tip Diam. Bar Diam. Length
330 0 to 1-21/32 0 to 42 9 230 Code
in mm in mm in mm
330 47-1/4” X 1/16” 1/16 1.59 1/4 6.35 4-3/8 111
CUTTING SNIPS 47-1/4” X 3/32” 3/32 2.38 1/4 6.35 4-3/4 121
Cut Length Total Length 47-5/16” X 1/8” 1/8 3.18 5/16 7.94 5-1/4 133
Code
in mm in mm 47-5/16” X 5/32” 5/32 3.97 5/16 7.94 5-5/8 143
320G 2-1/2 53.9 10 254 47-3/8” X 3/16” 3/16 4.76 3/8 9.53 6-1/8 156
322G 2-5/8 66.7 12-3/4 324 47-7/16” X 7/32” 7/32 5.56 7/16 11.11 6-1/2 165
320G
324G 4 101.6 14 356 47-1/2” X 1/4” 1/4” 6.35 1/2 12.70 6-3/4 171

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
3028 5/3/06 10:23 AM Page 1

537-06

URREA PROFESSIONAL TOOLS, INC.

6-TON STRAIGHT-JAW PULLERS 10-TON STRAIGHT-JAW PULLERS


14-PIECE PULLER SET 8-PIECE PULLER SET
with 2-Arm Crossbar & 8 Jaws with 2-Arm Crossbar & 4 Jaws
Code 4212SJ Code 4238
Code 4212SJB (with box) Code 4238B (with box)
Includes 1 crossbar, 4 clamps, 1 screw, 8 jaws Includes 1 crossbar, 2 clamps, 1 screw, 4 jaws
Jaw Type Quantity Reach (in.) Jaw Type Quantity Reach (in.) (mm)
Short jaw 2 4 Double reach jaw 2 7-9/32 185
Long jaw 2 5-1/2 Screw head jaw 2 3 76
Narrow jaw 2 5-7/16
Screw head jaw 2 2-5/8
12-PIECE PULLER SET
with 2-Arm Crossbar & 6 Jaws
20-PIECE PULLER SET Code 4234
with 3-Arm Crossbar & 12 Jaws Code 4234B (with box)
Code 4216 Includes 1 crossbar, 4 clamps, 1 screw, 6 jaws
Includes 1 crossbar, 6 clamps, 1 screw, 12 jaws Jaw Type Quantity Reach (in.) (mm)
Jaw Type Quantity Reach (in.) Double reach jaw 2 7-9/32 185
Short jaw 3 4 Narrow jaw 2 7 178
Long jaw 3 5-1/2 Screw head jaw 2 3 76
Narrow jaw 3 5-7/16
Screw head jaw 3 2-5/8
14-PIECE PULLER SET
with 2-Arm Crossbar & 8 Jaws
Code 4030
Code 4030B (with box)
Includes 1 crossbar, 4 clamps, 1 screw, 8 jaws
Jaw Type Quantity Reach (in.) (mm)
Short jaw 2 4-23/32 120
Double reach jaw 2 7-9/32 185
Narrow jaw 2 7 178
Screw head jaw 2 3 76
2- or 3-JAW
REVERSIBLE PULLERS
Jaw No. of Aperture Reach
Code Capacity Type Jaws Capacity (in.)
4046 5 tons Reversible 2 or 3 7 3-1/2
4047 7 tons Reversible 2 or 3 10 5-1/2

2- or 3-BAR SLIDE HAMMER PULLERS


6-TON CAPACITY
Code 4285 – With Three Accessories
Code 4270A – With One Accessory
Hammer Weight 3 lbs. – Min. Test Load 5,000 lbs.
Jaw Type Parts Contents & Aperture Range Jaw Type
Reversible 2 Internal 1-1/4” minimum - 3-3/8” maximum Double internal
External 1” minimum - 4-1/2” maximum Double external
Reversible 3 Internal 1-5/16” minimum - 4-3/4” maximum Triple internal
Internal 1-1/2” minimum - 4-1/2” maximum Triple external
Accessories: 1) 3-lb hammer mounted on a 5/8”–18” bar with 22” stroke
2) Hook accessory for removing gears, bushings, fasteners, and bearing races with
thread dimensions of 5/8”-18” (4285 only)
3) Special accessory for pulling generator and drive bearings (4285 only)

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
3029 5/3/06 10:25 AM Page 1

538-06

URREA PROFESSIONAL TOOLS, INC.


UNIVERSAL LOCKING PLIERS LONG-NOSE LOCKING PLIERS
Length Jaw Width Jaw Adjustment Length Jaw Width Jaw Adjustment
Code Code
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)
4072U* 7 177 5/16 9 1-5/8 42 286LN 6 152.4 3/16 4.5 2-7/8 48
4102U* 10 224 5/8 16 2-1/2 63 4102U 289LN 10 254 7/32 5.5 2-1/8 53
4104U* 12 305 1/2 13 2-1/2 63 4091* 7 177 3/16 4.5 2-3/16 55
4099* 9 228 1/4 6 2-3/4 70
STRAIGHT JAW LOCKING PLIERS
Length Jaw Width Jaw Adjustment
Code WELDER’S LOCKING PLIERS
(in.) (mm) (in.) (mm) (in.) (mm)
286LN
Length Jaw Width Jaw Adjustment
291R 7 177.8 9/16 14 1 25.4 Code
(in.) (mm) (in.) (mm) (in.) (mm)
293R 9 228 5/8 16 1-1/2 37
261R 9 228 2-3/4 69.8 1-3/4 45
4071* 7 177 1/2 13 1-11/16 42
4129* 9 225 2-3/4 69.8 2-3/8 60
4101* 10 254 5/8 16 2-1/2 63
4101
CURVED JAW LOCKING PLIERS WITH WIRE CUTTER
Length Jaw Width Jaw Adjustment
Code
(in.) (mm) (in.) (mm) (in.) (mm)
293WR 5 127 5/16 16 1-3/8 35 260R
294WR 7 177.8 11/32 8 1-3/16 30
LOCKING PLIERS FOR SHEET METAL
292WR 10 254 5/8 8.7 1-9/16 40 261R
Length Jaw Width Jaw Adjustment
4105* 5 127 1/4 6.3 1-3/16 30 Code
4073* 7 177 5/16 9 1-5/8 42 (in.) (mm) (in.) (mm) (in.) (mm)
4103* 10 254 3/8 10 2-1/2 63 260R 8 203 3 76.2 1-1/4 32
4128* 8 203 3-1/8 80 1-3/4 45
4073
LOCKING CHAIN PLIERS
Length Max. Adj. Jaw Width Chain Width
Code
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)
4120* 9-1/2 240 6-5/16 160 3-3/4 19 1/2 12

4116

LOCKING FLOW OBSTRUCTION PLIERS LOCKING C-CLAMP


Length Jaw Width Jaw Adjustment 4120 Length Jaw Width Jaw Adjustment
Code Code
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)
4121* 7 177 1/4 6 1 25.4 266R 11 279 1-1/8 28 3 76
4110* 10 254 1/4 6 2-3/4 70 4116* 6 152 3/4 18.2 2 50
4111* 11 276 1-1/4 32 3-15/16 100
4121
FORGED C-CLAMPS 4118* 18 457 1-1/4 32 9-1/16 230
Capacity A Screw Length B Screw Diameter C Throat Size D Maximum 4124* 24 609 15-3/4 400 14-9/16 370
Code Capacity
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (lbs.)
402 0-2 120.65 4-3/4 12.7 1/2 50.8 2 3,300
403 0-3 146.05 5-3/4 12.7 1/2 60.3 2-3/8 3,500
404 0-4 193.67 7-5/8 19.1 3/4 69.9 2-3/4 4,100
410
406 0-6 247.01 9-7/8 19.1 3/4 66.7 3-5/8 5,400
408 0-8 314.25 12-3/8 19.1 3/4 114.3 4-1/2 5,900
410 3 - 10 314.25 12-3/8 19.1 3/4 136.5 5-3/8 6,200
412 4 - 12 342.9 13-1/2 22.2 7/8 146.1 5-3/4 9,300
* Indicates use for Heavy Duty

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
3030 5/3/06 10:26 AM Page 1

539-06

URREA PROFESSIONAL TOOLS, INC.

5-POSITION
TONGUE & GROOVE PLIERS LONG-NOSE,
Code 240G – Length: 10" / 254mm NON-CUTTING
ELECTRICIAN’S PLIERS
WIRE STRIPPING PLIERS WITH
Code 282GR – Length: 4-7/8" / 124mm
TERMINAL CRIMPER & SCREW CUTTER
Code 282G – Length: 4-7/8" / 124mm
Cuts wire gauges 10,12,14,16,18,20,22
Code 227G – Length: 6-5/8" / 168mm
SLIP JOINT PLIERS Cuts screw gauges 4-40, 10-24, 10-32,
Code 220G – Length: 6-5/8" / 164mm
WITH RUBBER GRIP 8-32, 6-32, 5-40
Code 276G – Length: 6-3/8" / 161mm Code 299 – Length: 8-3/4" / 222mm
Code 278G – Length: 8" / 203mm Code 298 – Length: 8-1/4" / 210mm
EXTRA-LONG-NOSE
Code 280G – Length: 10" / 254mm
MECHANIC’S PLIERS
45° Bent Tip – Code 241G
Length: 9-5/8" / 245mm
Straight Tip – Code 239G
Length: 11" / 280mm WIRE TWISTING PLIERS
SIDE CUTTING, HIGH LEVERAGE, With Spring
ELECTRICIAN’S PLIERS Code 190 – Length: 8-1/2" / 216mm
Code 268GHL – Length: 8-1/2" / 216mm SIDE-CUTTING Code 192 – Length: 10-1/2" / 267mm
Code 269GHL – Length: 9-1/8" / 232mm LONG-NOSE Manual
ELECTRICIAN’S PLIERS Code 191 – Length: 10-1/2" / 267mm
Code 226GR
(with spring & rubber grip) FLOW
Length: 6-3/4" / 171mm OBSTRUCTION
Code 226G PLIERS
SIDE CUTTING, HIGH LEVERAGE, Length: 6-3/4" / 171mm
Code 253G – Length: 9" / 229mm
TERMINAL CRIMPING Code 226GS
ELECTRICIAN’S PLIERS Length: 6-1/2" / 165mm
Code 259GHL – Length: 9-1/2" / 242mm
ROUND-TIP
SMOOTH-JAW
ELECTRONICS PLIERS
DIAGONAL CUTTING WITH SPRING
ELECTRICIAN’S PLIERS Code 28560
Code 204G – Length: 4-5/16" / 110mm Length: 4-21/32" / 118mm
Code 205G – Length: 5-9/16" / 141mm
Code 206G – Length: 6-1/8" / 156mm
NEEDLE-TIP
6-PIECE RETAINING RING SET
SMOOTH-JAW
ELECTRONICS PLIERS Code 370L – Includes the following:
WITH SPRING Code 371P – 90° Tip – 0.040" / 1.01mm diam.
SIDE-CUTTING Code 372P – Straight Tip – 0.050" / 1.27mm diam.
Straight Tip
ELECTRICIAN’S PLIERS Code 28641 – Length: 5-5/8" / 154mm Code 374P – 90° Tip – 0.050" / 1.27mm diam.
Code 267G – Length: 9-9/16" / 230mm Code 399P – Straight Tip – 0.040" / 1.01mm diam.
Bent Tip
Code 268G – Length: 8-3/4" / 222mm Code 376P – 90° Tip – 0.068" / 1.72mm diam.
Code 28520 – Length: 5-7/8" / 149mm
Code 269G – Length: 9-3/8" / 238mm Code 385P – Straight Tip – 0.068" / 1.72mm diam.

Urrea Professional Tools, Inc.


San Antonio, TX
800-366-6911 • 210-734-8703
Fax: 210-734-8715 • E-mail: urrea@urrea.com
BUY MORE FOR LESS! . . . See our full line catalog and place orders at www.urrea.com
566 5/3/06 10:27 AM Page 596

540-06

AMPCO SAFETY TOOLS


Non-Sparking Tools
a
d

l
b c
Awl
b Number
d l  d l Wt. Brush, Flat Back, Scratch
mm mm g inch inch lbs. Block Size a x b Rows Trim Length c Wgt. Ea.
8230 4 185 45 5/32 7-1/4 .10 Number (inches) (inches) (inches) (lbs.)
(mm) (mm) (grams)
2.250 x 7.250 6 x 19 1-3/4 .75
B-401
57.150 x 184.150 6 x 19 44.450 340

a
Barrel Hook, Adjustable a
I b c
b max L max  b max L max Wt.
Number
mm kg g Inch lbs. lbs. Axe, Fireman’s (with fiberglass handle only) Brush, Shoe Handle, Scratch
B-10 1060 700 2430 42 1500 5.36 a b l  a b l Wt. Block Size a x b Rows Trim Length c Wgt. Ea.
Number
mm mm mm g inch inch inch lbs. Number (inches) (inches) (inches) (lbs.)
(mm) (mm) (grams)
KITS A-15 FG 127 305 915 3770
A-16 FG 127 305 915 4677
5
5
12
12
36
36 10.31
8.31
B-399 1.063 x 10.000 4 x 16 1-1/8 .45
27.000 x 254.000 4 x 16 28.575 205

M-47 KITS
a
a
Pieces
S-48 Std Screwdriver-
b c
9/32" Tip, 3" Blade
P-30 6-1/2" Combination Pliers I
Brush, Curved Handle, Scratch
W-71 8" Adjustable End Wrench Bar, Crow Block Size a x b Rows Trim Length c Wgt. Ea.
CJ-1-ST 9" Crate Opener
S-1099 #2 Phillips Screwdriver a l  a l Wt. Number (inches) (inches) (inches) (lbs.)
Number
mm mm g inch inch lbs. (mm) (mm) (grams)
P-39 #10 Groove Joint Pliers
P-11 28 1525 8500 1-1/4 60 18.76 B-400 1.125 x 13.750 4 x 19 1-1/8 .55
P-12 32 1730 11000 1-3/8 68 24.48 28.575 x 349.250 4 x 19 28.575 250
M-51
HAZMAT KITS s
Pieces l
B-399 Shoe Handle
Brush
Bar, Pinch a

CJ-1-ST 9" Crate Opener s l  s l Wt.


Number
H-20FG 16oz Claw mm mm g inch inch lbs.
Hammer P-8 22 760 2330 7/8 30 5.14
P-9 19 460 1040 3/4 18 2.28 b
K-5 Common Knife
5-3/4" Blade, 10-3/4" OAL P-10 25 910 3960 1 36 8.74 Brush, Cup, Crimped Wire
K-21 Putty Knife (Stiff) 1-1/4" b Dia. a Wire Size Arbor b Max. Safe Wgt. Ea.
x 3-9/16" Blade 7-3/4" OAL Number (inches) (inches) (inches) Free Speed (lbs.)
P-312 12" Adjustable Pipe Wrench (mm) (mm) (mm) (RPM) (grams)
P-326 7" Long Nose Pliers CB-30CT 3.0 .014 5/8-11 12,500 .80
P-31 8" Combination Pliers 76.2 0.356 threaded 12,500 365
S-11G Deck Scraper-1-1/2" x 15" CB-44 6.0 .020 5/8 6,000 2.80
a I
S-40 Spray Booth Scraper-3" x 9-1/4"
S-49 Std Screwdriver-5/16" Tip, 6" Blade Bar, Wrecking 152.4 0.508 plain 6,000 1270
CB-44CT 6.0 .014 5/8-11 6,000 3.00
S-1100 #3 Phillips Screwdriver a b l  a b l Wt.
Number 152.4 0.356 threaded 6,000 1360
S-1144 12" Tin Snips mm mm mm g inch inch inch lbs.
CB-45 4.0 .020 1/2 8,000 1.30
W-71 8" Adjustable End Wrench W-29 28 16 460 870 1-1/8 5/8 18 1.92
101.6 0.508 plain 8,000 590
W-73 12" Adjustable End Wrench W-30 33 19 610 1700 1-1/4 3/4 24 3.78
W-212AL 14" Adjustable Pipe Wrench (ALUM) W-30a 39 22 760 2720 1-9/16 7/8 30 6.00 CB-45CT 4.0 .014 5/8-11 8,000 1.50
W-56 12" Bung Wrench W-31 43 22 920 3300 1-11/16 7/8 36 7.24 101.6 0.356 threaded 8,000 680

Ampco Safety Tools offers the most complete line of non-sparking, non-magnetic and
corrosion-resistant hand tools worldwide. Over 2200 tools are available in both inch
and metric sizes. Special tools and sizes can be produced to customer specifications.
Tel: 972-276-6181 • Fax: 972-276-5815 • Toll Free: 800-580-9835
E-Mail: sales@AmpcoSafetyTools.com • Web: www.AmpcoSafetyTools.com
567 5/3/06 10:29 AM Page 597

541-06

AMPCO SAFETY TOOLS


Non-Sparking Tools
a
s

a a
l
l

Chisel, Hand Crate Opener


a l  a l Wt.
a s l  a s l Wt. Number
Number mm mm g inch Inch lbs.
c b mm mm mm g inch inch inch lbs.
C-12 14 13 152 165 9/16 1/2 6-1/2 .30 CJ-1-ST 70 230 420 2-3/4 9 .94
C-12a 11 10 140 92 7/16 3/8 5-3/4 .16
Brush, Wheel, Crimped Wire C-12b 6 6 133 35 1/4 1/4 5-1/4 .08
C-13 19 17 155 280 3/4 5/8 6 .54
Dia. a Face Width b Wire Size Arbor c Max. Safe Wgt. Ea.
a
Number (inches) (inches) (inches) (inches) Free Speed (lbs.)
(mm) (mm) (mm) (RPM) (grams)
b 17,3 mm ø l d
WB-20C 2.0 .250 .008 1/2 20,000 .10 c
50.8 6.350 0.254 plain 20,000 45 Drift Pin, Barrel Type
WB-30C 3.0 .375 .014 1/2 20,000 .15
a a d l  a d l Wt.
76.2 9.525 0.356 plain 20,000 70 Number
WB-44 6.0 1.0 .014 5/8 4,500 1.60 mm mm mm g inch inch inch lbs.
.680 round shank
152.4 25.400 0.356 plain 4,500 725 D-1 5 17 200 230 3/16 11/16 8 .50
WB-44A 6.0 1.0 .014 1/2 4,500 1.60 l
152.4 25.400 0.356 plain 4,500 725
D-2 8 21 200 360 5/16 13/16 8 .80
WB-44B 6.0 1.0 .014 3/4 4,500 1.60 Chisel, Pneumatic, w/ D-3 10 24 200 415 7/16 15/16 8 .94

WB-44C
152.4
6.0
25.400
1.0
0.356
.014
plain
1
4,500
4,500
725
1.60
Retaining Collar D-4 13 27 200 600 9/16 1-1/16 8 1.32
D-5 18 30 200 880 11/16 1-3/16 8 1.95
152.4 25.400 0.356 plain 4,500 725 a b c l  a b c l Wt.
WB-44D 6.0 1.0 .014 11/4 4,500 1.60 Number mm mm mm mm g inch inch inch inch lbs.
D-6 22 33 200 1050 13/16 1-5/16 8 2.32
152.4 25.400 0.356 plain 4,500 725 CR-20-ST 40 22 19 195 400 1-1/2 7/8 3/4 7-3/4 .90
WB-45 4.0 .750 .014 1/2 6,000 .80
CR-21-ST 45 23 22 203 500 1-3/4 15/16 7/8 8 1.10
101.6 19.050 0.356 plain 6,000 365
WB-45A 4.0 .750 .014 3/8 6,000 .80 CR-22-ST 65 25 22 220 600 2-1/2 1 7/8 8-5/8 1.32
101.6 19.050 0.356 plain 6,000 365 a
WB-45B 4.0 .750 .014 5/8 6,000 .80
l d
101.6 19.050 0.356 plain 6,000 365 s
Drift Pin, Straight Type
.680 round
b a d l  a d l Wt.
shank Number
17, 3 mm ø mm mm mm g inch inch inch lbs.
a
l1 l2 D-20 6 13 150 100 1/4 1/2 6 .22
D-21 7 17 150 100 9/32 11/16 6 .22
b c Chisel, Pneumatic Scaling D-22 8 21 205 175 5/16 13/16 8 .38
s b l1 l2  s b l1 l2 Wt. D-23 12 24 255 645 7/16 15/16 10 1.42
Number
Broom, Round Wire, Push mm mm mm mm g inch Inch inch Inch lbs.
D-24 13 29 255 865 1/2 1-1/8 10 1.90
CP-20-ST 19 38 124 76 290 3/4 1-1/2 4-3/4 3 .90
Block Size a x b Rows Trim Length c Wgt. Ea.
Number (inches) (inches) (inches) (lbs.) CP-21-ST 22 44 127 76 520 7/8 1-3/4 5 3 1.10
(mm) (mm) (grams) CP-22-ST 22 64 154 76 610 7/8 2-1/2 6 3 1.32
PB-10 2.500 x 12.000 6 x 26 2-1/2 2.20
63.500 x 304.800 6 x 26 63.500 997 c

b s
s
a
l
a
Chisel, Pneumatic Scaling b
l
l
s b l  s b l Wt.
Number
Chisel, Diamond Point mm mm mm g inch inch inch lbs.
Dust Pan
a s l  a s l Wt. CS-22-ST 13 32 90 60 1/2 1-1/4 3-1/2 .24
Number Number a b c l  a b c l Wt.
mm mm mm g inch inch inch lbs.
CS-23-ST 13 16 125 60 1/2 5/8 5 .28 mm mm mm mm g inch inch inch inch lbs.
C-6 13 20 205 435 1/2 3/4 8 .96
CS-24-ST 13 50 125 140 1/2 2 5 .36 D-49 100 200 40 330 515 4 8 1-1/2 13 1.14
C-7 19 23 310 915 3/4 7/8 12 2.02 D-50 230 190 40 305 780 9 7-1/2 1-1/2 12 1.72
CS-25-ST 13 50 200 290 1/2 2 7-3/4 .72

Ampco Safety Tools


204 N. Barnes Drive To see and/or print our catalog, place an
Garland, TX 75042 order, or learn more about Ampco and
Tel 972-276-6181
Fax 972-276-5815 our products, visit Ampco online at
Toll Free 800-580-9835 www.AmpcoSafetyTools.com
E-mail: sales@AmpcoSafetyTools.com
Web: www.AmpcoSafetyTools.com
0568 5/3/06 10:30 AM Page 598

542-06

AMPCO SAFETY TOOLS


Non-Sparking Tools
H
b
l
H
l Knife, Putty, Stiff Blade
Hammer, Claw* l a b l  a b l Wt.
Number
 H l Wt. mm mm mm g inch inch inch lbs.
Number
g mm g lbs. inch lbs. Mallet* K-15 19 86 184 65 3/4 3-3/8 7-1/4 .14
H-19FG 340 356 635 .75 14 1.4 H l  H l Wt. K-21 30 90 200 75 1-1/4 3-9/16 7-3/4 .16
H-20FG 455 356 816 1.00 14 1.8 Number g mm g lbs. inch lbs. K-20 50 105 205 110 2 4 8 .24
H-21FG 565 356 953 1.25 14 2.1 M-1FG 900 356 1090 2.00 14 2.4 K-30 90 114 215 145 3-1/2 4-1/2 8-1/2 .32
M-2FG 1800 380 1950 4.00 15 4.3
M-3FG 2700 380 2858 6.00 15 6.3
H

l a b

Hammer, Engineers’ l

(Ball Peen)* l1 Knife, Putty, Flexible Blade


l2
H l  H l Wt. a b l  a b l Wt.
Number Number
g mm g lbs. inch lbs. Knife, Gasket mm mm mm g inch inch inch lbs.
H-00FG 115 250 181 .25 9-3/4 .40 K-31 90 114 215 120 3-1/2 4-1/2 8-1/2 .26
Number a l1 l2  a l1 l2 Wt.
H-1FG 340 356 590 .75 14 1.3 mm mm mm g inch inch inch lbs.
H-2FG 455 356 726 1.00 14 1.6 9430 25 220 400 300 1 8-1/2 15-3/4 .66
a
H-3gFG 680 356 907 1.50 14 2.0
b
H-4FG 905 356 1179 2.00 14 2.6
l
H-5FG 1020 356 1315 2.25 14 2.9
H-6FG 1245 356 1451 2.75 14 3.2 Knife, Utility
a b l  a b l Wt.
Number
a mm mm mm g inch inch inch lbs.
K-10 22 101 203 80 7/8 4 8 .18
H

l1
l2

Hammer, Scaling* Knife, Gasket a

H l  H l Wt. Number a l1 l2  a l1 l2 Wt.


Number mm mm mm g inch inch inch lbs.
g mm g lbs. inch lbs.
9432 30 400 690 1200 1-3/16 15-3/4 27 2.65 l b
H-60FG 455 355 570 1.00 14 1.5
9434 40 800 1240 2000 1-1/2 31-1/2 49 4.41
H-61FG 680 355 790 1.50 14 2.1 Mop Holder
H-62FG 1360 381 1450 3.00 15 3.5
a b l  a b l Wt.
Number
mm mm mm g inch inch inch lbs.
M-1286 170 22 225 700 6-1/2 7/8 9 1.54

a
l
a

Hammer, Sledge*
H l  H l Wt. b
Number l
g mm g lbs. inch lbs. l
H-69FG 1400 380 1588 3.00 15 3.5
H-70FG 2200 840 3220 5.00 33 7.1 Knife, Linoleum Pliers, Adustable Combination
H-71FG 3400 840 4355 7.50 33 9.6 a max l  a max l Wt.
a b l  a b l Wt. Number
H-72FG 4535 840 5080 10.00 33 11.2 Number mm mm g inch inch lbs.
H-73FG 6800 840 7302 15.00 33 16.1 mm mm mm g inch inch inch lbs. P-30 8 165 190 5/16 6-1/2 .42
H-74FG 8165 840 8709 18.00 33 19.2 K-40 64 116 191 80 2-1/2 4-9/16 7-1/2 .18 P-31 13 205 235 1/2 8 .52

*Available with Fiberglass handle only

Ampco Safety Tools are recommended by safety engineers and insurance companies
and have the approval of Factory Mutual Research Corporation and OSHA. Ampco
tools are available in aluminum bronze and other special copper alloys.
Tel: 972-276-6181 • Fax: 972-276-5815 • Toll Free: 800-580-9835
E-Mail: sales@AmpcoSafetyTools.com • Web: www.AmpcoSafetyTools.com
569 5/3/06 10:31 AM Page 599

543-06

AMPCO SAFETY TOOLS


Non-Sparking Tools
a
l d

Punch, Center (Precision Machined)


d l  d l Wt. b
Number
mm mm g inch inch lbs. c

P-1290 8 100 30 5/16 4 .06 l


l
P-1291 10 115 45 3/8 4-1/2 .10
Pliers, Diagonal Cutting P-1292 13 125 95 1/2 5 .20 Scraper
Number
l  l Wt. P-1293 16 150 175 5/8 6 .38 (Long Blade and Short Blade)
mm g inch lbs.
Number a b c l  a b c l Wt.
P-36 178 160 7 .35 mm mm mm mm g inch inch inch inch lbs.
a S-20 75 63.5 6 228 605 3 2-1/2 1/4 9 1.34
l d S-21 100 63.5 6 228 780 4 2-1/2 1/4 9 1.72
S-22 125 63.5 6 228 820 5 2-1/2 1/4 9 1.80
Punch, Pin (Precision Machined) S-23 150 57 6 216 900 6 2-1/4 1/4 8-1/2 2.00
S-30 75 38 6 177 480 3 1-1/2 1/4 7 1.06
a d l  a d l Wt.
Number S-31 100 38 6 177 510 4 1-1/2 1/4 7 1.12
mm mm mm g inch inch inch lbs.
a S-32 125 32 6 177 535 5 1-1/4 1/4 7 1.18
P-50 3 10 130 45 1/8 3/8 5 .10 S-33 150 38 6 171 555 6 1-1/2 1/4 6-3/4 1.22
P-51 6 14 150 120 1/4 9/16 6 .28
P-52 10 14 180 155 3/8 9/16 7 .34
P-53 13 18 200 290 1/2 11/16 8 .64
l P-54 16 21 300 645 5/8 13/16 12 1.42 a

Pliers, Groove Joint


a max l  a max l Wt.
Number
mm mm g inch inch lbs. a
l
P-39 45 255 400 1-1/2 10 .68
P-312 55 300 550 2-1/8 12 1.24
l1
Scraper, Deck
l2 a l  a l Wt.
Number
mm mm g inch inch lbs.
Saw Frame, Hack S-11g 38 380 780 1-1/2 15 1.68
a l1 l2  a l1 l2 Wt.
Number
mm mm mm g inch inch inch lbs.
8360 115 300 540 900 4-1/2 11-3/4 21-1/4 1.98

l b

l
Pliers, Long Nose with Cutter b
Saw Blade, Hack l
l  l Wt.
Number 
mm g inch lbs. Number
b
mm
l
mm g
b
inch
l
inch
Wt.
lbs.
Scraper, Hand Style
P-326 180 160 7 .34 a b l  a b l Wt.
8356 14 300 30 9/16 11-3/4 .07 Number
mm mm mm g inch inch inch lbs.
S-1069 95 95 480 640 3-3/4 3-3/4 18-3/4 1.42

l l a
l
Scraper, Deck Scraper, Ship
Pliers, Pipe Number
a l  a l Wt.
Number
a b l  a b l Wt.
l  l Wt. mm mm g inch inch lbs. mm mm mm g inch inch inch lbs.
Number
mm g inch lbs. S-10ag 22 200 210 7/8 7-7/8 .44 S-27 100 70 406 610 4 2-3/4 16 1.34
P-33 205 370 8 .78 S-10g 50 300 570 2 12 1.24 S-27s blade only 200 blade only .42

Ampco Safety Tools


204 N. Barnes Drive To see and/or print our catalog, place an
Garland, TX 75042 order, or learn more about Ampco and
Tel 972-276-6181
Fax 972-276-5815 our products, visit Ampco online at
Toll Free 800-580-9835 www.AmpcoSafetyTools.com
E-mail: sales@AmpcoSafetyTools.com
Web: www.AmpcoSafetyTools.com
570 5/3/06 10:32 AM Page 600

544-06

AMPCO SAFETY TOOLS

a
Non-Sparking Tools
b a
l

d
b
Screwdriver (Standard Type) l

a b l  a b l Wt. Spatula
Number l
mm mm mm g inch inch inch lbs.
a b l  a b l Wt.
S-48 8 80 170 65 9/32 3 6-1/2 .14 Number
mm mm mm g inch inch inch lbs.
Wrench, Adjustable Pipe,
S-49 8 150 260 136 5/16 6 10-1/8 .30
S-50 10 200 330 225 3/8 8 13 .50 S-90 25 150 260 50 1 6 10-1/4 .12 Bronze
S-51 10 300 430 290 3/8 12 17 .64 S-91 40 230 350 135 1-1/2 9 14 .30
d max l  d max l Wt.
S-54 3 150 241 55 1/8 6 9-1/2 .12 S-92 50 355 490 230 2 14 19-1/4 .50 Number
mm mm g inch inch lbs.
W-210 19 205 600 3/4 8 1.32
a
W-211 25 255 990 1 10 2.10
l b W-212 38 355 1600 1-1/2 14 3.24
W-213 50 460 2200 2 18 4.72
b Wedge, Flange W-214 65 610 4050 2-1/2 24 8.72
l
Number a b l  a b l Wt. W-215 90 915 7350 3-1/2 36 16.18
Screwdriver (Phillips Type) W-1
mm
6
mm
15
mm
80
g
50
inch
1/4
inch inch lbs.
1/2 3 .04
W-216 130 1219 13800 5 48 30.38
b l  b l Wt. W-2 13 19 102 100 1/2 3/4 4 .18
Number
Type mm mm g inch inch lbs. W-3 13 25 150 200 1/2 1 6 .42
S-1099a 1 75 155 55 3 6-1/2 .12 W-4 19 38 150 400 3/4 1-1/2 6 .92
S-1099 2 105 190 73 4 7-1/2 .16 W-5 13 32 180 300 1/2 1-1/4 7 .64
S-1100 3 155 260 136 6 10-1/8 .30 W-6 19 50 180 700 3/4 2 7 1.56
S-1101 4 200 330 225 8 13 .50 W-7 41 38 200 1300 1-5/8 1-1/2 8 2.50
W-8 25 38 200 800 1 1-1/2 8 1.72
W-9 19 50 200 700 3/4 2 8 1.66
W-10 32 50 215 1400 1-1/4 2 8-1/2 2.96
W-11 10 50 180 400 3/8 2 7 .74
W-12 10 50 90 200 3/8 2 3-1/2 .40
l

a
Wrench, Bung
l s l  l Wt.
Number
mm g inch lbs.
Snips, Tin W-56 305 680 12 1.50
a l  a l Wt.
Number
mm mm g inch inch lbs.
S-1126a 50 210 175 2 8 .38 l

S-1144 75 305 560 3 12 1.24 Wrench, Adjustable End


S-1144a 115 355 960 4-1/2 14 2.12
Number s max l  s max l Wt.
mm mm g inch inch lbs.
W-70 24 152 100 15/16 6 .22
W-71 29 203 200 1-1/8 8 .44
W-72 33 254 313 1-5/16 10 .69
W-73 38 305 567 1-1/2 12 1.25 s
W-74 43 381 1275 1-11/16 15 2.81

l
a

a Wrench, Monkey (Railroad)


l
s max I  s max I Wt.
Number
b b mm mm g inch inch lbs.
l W-1145 38 203 670 1-1/2 8 1.48
Wrench, Bung, W-1146 48 254 980 1-7/8 10 2.16
Shovel, Scoop for 22 different bungs W-1147 58 305 1605 2-1/4 12 3.54
a b l  a b l Wt. W-1148 70 380 2370 2-13/16 15 5.22
Number a b l  a b l Wt. W-1149 80 460 3855 3 18 8.50
mm mm mm g inch inch inch lbs. Number
mm mm mm g inch inch inch lbs.
S-80 330 430 1120 2900 13 17 44 6.40 W-1150 105 540 5090 4-1/8 21 11.22
W-58-S 65 60 385 1300 2-1/2 2-1/4 15 2.70

Ampco Safety Tools are non-sparking, non-magnetic and corrosion-resistant hand tools.
Over 2200 styles and sizes, in both inch and metric, are available. Ampco Safety Tools
are recommended by Factory Mutual Research Corporation and OSHA.
Tel: 972-276-6181 • Fax: 972-276-5815 • Toll Free: 800-580-9835
E-Mail: sales@AmpcoSafetyTools.com • Web: www.AmpcoSafetyTools.com
571 5/3/06 10:33 AM Page 601

545-06

Non-Sparking Tools AMPCO SAFETY TOOLS


s
s1 s2
s s2 15°
15° s1

l l
s l l
Wrench, Combination Wrench, Double End Box, Wrench, Double Open End
Wrench, Allen Millimeter (mm) Offset Type, 12-Point
Millimeter (mm)
Millimeter (mm) Number s l  Millimeter (mm)
mm mm g Number s1 x s2 l 
Number s a l  Number s1 x s2 l  mm mm g
mm mm mm g 1300 8 135 45 mm mm g 0450 6 x 7 95 25
1302 9 150 50 1000 6 x 7 155 40 0452 6 x 8 100 30
WH-2MM 2 19 45 2 1304 10 160 50 1002 7 x 9 155 40 0454 7 x 8 100 30
WH-3MM 3 20 65 5 1306 11 175 75 1004 8 x 9 155 40 0456 7 x 9 110 35
WH-4MM 4 25 72 11 1308 12 190 95 1006 8 x 10 170 77 0458 8 x 9 110 35
WH-5MM 5 28 80 19 1310 13 205 115 1008 9 x 11 170 77 0460 8 x 10 115 40
1312 14 205 115 1010 10 x 11 170 77 0462 9 x 10 115 40
WH-6MM 6 32 90 30 0464 9 x 11 125 50
1314 15 225 145 1012 10 x 12 180 105
WH-8MM 8 36 100 60 1014 11 x 12 180 105 0466 10 x 12 135 65
WH-10MM 10 40 112 105 1316 16 225 145 1016 12 x 13 180 105 0468 10 x 14 145 85
1318 17 245 170 1018 10 x 14 200 130 0470 11 x 13 145 85
WH-12MM 12 45 125 170
1320 18 245 170 1020 11 x 14 200 130 0472 11 x 14 145 85
WH-14MM 14 55 140 260 1322 19 270 260 1022 12 x 14 200 130 0474 12 x 14 145 85
WH-17MM 17 60 160 444 1324 20 270 260 1024 13 x 15 220 180 0476 13 x 15 155 105
WH-19MM 19 70 175 618 1326 21 295 300 1026 14 x 15 220 180 0478 14 x 16 155 105
1028 14 x 17 230 200 0480 14 x 17 170 130
WH-22MM 22 80 200 950 1328 22 295 300 0482 16 x 18 170 130
1030 16 x 17 260 255
WH-24MM 24 90 224 1260 1330 23 325 400 1032 16 x 18 260 255 0484 17 x 19 185 165
WH-27MM 27 110 250 1780 1332 24 325 400 1034 17 x 19 280 300 0486 18 x 20 185 165
WH-30MM 30 112 280 2460 1334 25 355 550 1036 18 x 19 280 300 0488 17 x 22 200 240
1336 26 355 550 1038 17 x 22 330 420 0490 19 x 22 200 240
WH-32MM 32 125 315 3140 1040 19 x 22 330 420 0492 20 x 22 200 240
1338 27 355 550
WH-36MM 36 140 355 4470 1340 28 390 690 1042 19 x 24 330 420 0494 19 x 24 220 300
American Inch (") 1044 20 x 22 330 420 0496 21 x 23 220 300
1342 30 390 690 0498 22 x 24 220 300
1046 21 x 23 330 420
Number s a l Wt. 1344 32 430 1000 1048 22 x 24 360 560 0500 22 x 27 240 390
inch inch inch lbs. 1346 34 430 1000 1050 24 x 26 360 560 0502 23 x 26 240 390
WH-1/16 1/16 3/4 1-3/4 .01 1348 36 475 1100 1052 22 x 27 400 660 0504 24 x 27 240 390
1350 38 475 1100 1054 24 x 27 400 660 0506 25 x 28 260 485
WH-5/64 5/64 3/4 1-3/4 .02 0508 24 x 30 260 485
1352 41 525 1450 1056 25 x 28 400 660
WH-3/32 3/32 3/4 1-7/8 .02 1058 24 x 30 410 820 0510 27 x 30 260 485
1354 46 575 1900
WH-1/8 1/8 13/16 2-5/16 .02 1060 27 x 30 410 820 0512 27 x 32 285 650
1357 50 575 2200 0514 30 x 32 285 650
WH-5/32 5/32 7/8 2-1/2 .02 1062 27 x 32 410 820
1358 55 575 2600 1064 30 x 32 430 820 0516 30 x 36 310 850
WH-3/16 3/16 7/8 2-7/8 .04 1360 60 575 3150 1066 30 x 36 480 1350 0518 32 x 36 310 850
WH-7/32 7/32 1-1/16 3-1/8 .06 1362 65 575 4580 1068 32 x 36 480 1350 0520 36 x 41 340 1150
WH-1/4 1/4 1-1/16 3-7/8 .08 1364 70 575 4580 1070 36 x 41 510 1750 0522 41 x 46 375 1500
1072 41 x 46 580 2550 0524 46 x 50 415 1900
WH-5/16 5/16 1-3/8 4-1/8 .14 American Inch (") 0526 50 x 55 455 2500
1074 46 x 50 630 3300
WH-3/8 3/8 1-1/2 4-1/2 .24 s l Wt. 1076 50 x 55 690 4250 0528 50 x 60 505 3200
WH-7/16 7/16 1-3/4 5-1/4 .36 Number inch inch lbs. 1078 50 x 60 740 4250 0530 55 x 60 505 3200
WH-1/2 1/2 1-3/4 5-1/4 .46 W-601 3/8 7-1/4 0.16 1080 55 x 60 740 5300 0532 65 x 70 555 4600
W-611 7/16 7-1/4 0.16 1082 65 x 70 760 7600 American Inch (")
WH-9/16 9/16 1-3/4 5-3/4 .62 1084 70 x 75 780 9400
WH-5/8 5/8 1-7/8 6-1/4 .86 W-621 1/2 7-1/4 0.14 s1 x s2 l Wt.
W-631 9/16 8-1/4 0.26 American Inch (") Number inch inch lbs.
WH-11/16 11/16 2-1/4 7-1/4 1.20
W-641 5/8 8-1/4 0.24 s1 x s2 l Wt. W-697 1/4 x 5/16 5-1/4 0.16
WH-3/4 3/4 2-1/4 7-1/4 1.42 Number inch inch lbs. W-698 3/8 x 7/16 5-1/4 0.16
W-651 11/16 10-1/8 0.46
WH-7/8 7/8 2-1/4 7-1/4 1.98 W-3109 5/16 x 3/8 7-3/4 0.12 W-699 7/16 x 1/2 5-1/4 0.14
W-661 3/4 10-1/8 0.46 W-700 1/2 x 5/8 6 0.32
WH-1 1 2-1/4 7-1/4 2.60 W-3110 3/8 x 7/16 7-3/4 0.22
W-671 7/8 13-1/4 0.94 W-702 1/2 x 11/16 6 0.32
W-3120 7/16 x 1/2 7-3/4 0.22
W-671b 15/16 13-1/4 0.91 W-704 9/16 x 5/8 6 0.34
1/2" Socket Sets W-671a 1 13-1/4 0.90
W-3130 1/2 x 9/16 9-1/2 0.26 W-706 9/16 x 3/4 6-3/4 0.58
W-3140 1/2 x 19/32 9-1/2 0.44 W-710 5/8 x 3/4 6-3/4 0.54
W-260M (mm) W-672 1-1/16 17 1.22 W-3150 9/16 x 5/8 9-1/2 0.40 W-712 11/16 x 25/32 6-3/4 0.54
Sockets (mm) W-673 1-1/8 17 1.26 W-3160 5/8 x 3/4 10-3/4 0.46 W-718 11/16 x 7/8 6-3/4 0.52
W-674 1-1/4 19-1/2 2.08 W-3170 11/16 x 25/32 10-3/4 0.66 W-720 3/4 x 13/16 9-1/4 0.84
10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
W-675 15/16 19-1/2 2.46 W-3180 3/4 x 7/8 12-1/4 0.74 W-722 3/4 x 7/8 9-1/4 0.84
20, 21, 22, 23, 24, 25, 26, 27, 28, 29, W-724 25/32 x 7/8 9-1/4 0.86
W-676 1-3/8 21-1/4 2.84 W-3190 13/16 x 7/8 12-1/4 0.72
30, 32 W-677 1-7/16 21-1/4 2.78 W-732 7/8 x 15/16 9-1/4 1.08
W-3210 7/8 x 1 14-3/4 1.20 W-736 7/8 x 1 9-1/4 1.08
 (g) 7275 W-678 1-1/2 22 3.38 W-3220 7/8 x 1-1/16 15-1/8 1.48 W-738 7/8 x 1-1/16 10-3/4 1.36
W-679 1-5/8 22 3.30 W-3221 15/16 x 1 14-3/4 1.24 W-740 15/16 x 1-1/16 10-3/4 1.34
W-260 (in.) 1504 11-1/16 22-3/4 4.19 W-3230 15/16 x 1-1/16 15-1/8 1.42 W-741 1 x 1-1/8 10-3/4 1.34
Sockets (in.) 1506 1-3/4 22-3/4 4.19 W-3240 1 x 1-1/8 15-1/8 1.36 W-748 1-1/16 x 1-1/4 13-3/8 2.64
5/16, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 1508 2 22-3/4 4.85 W-3241 1-1/16 x 1-1/8 15-1/8 1.32 W-750 1-1/8 x 1-5/16 13-3/8 2.64
11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 1510 2-3/16 22-3/4 5.73 W-3250 1-1/16 x 1-1/4 19-1/4 2.42 W-754 1-1/8 x 1-1/2 15-1/4 3.74
1512 2-3/8 22-3/4 6.94 W-756 1-1/4 x 1-7/16 15-1/4 3.76
1, 1-1/16, 1-1/8, 1-1/4 W-3260 1-1/8 x 1-5/16 19-1/4 2.34 W-760 1-1/4 x 1-5/8 15-1/4 3.94
 (lbs.) 11.02 1514 2-9/16 22-3/4 10.08 W-3261 1-1/4 x 1-5/16 19-1/4 2.28 W-764 1-7/16 x 1-5/8 16-3/4 4.26
1516 2-3/4 22-3/4 10.08 W-3270 1-1/4 x 1-7/16 19-1/4 2.26 W-772 1-5/8 x 1-13/16 18-3/4 8.56
Sets include ratchet, extension bar, sliding bar,
hinged handle wrench and carrying case.
1518 2-5/8 22-3/4 10.08 W-3271 1-7/16 x 1-5/8 19-1/4 2.66 W-778 1-13/16 x 2 18-3/4 8.34

Ampco Safety Tools


204 N. Barnes Drive To see and/or print our catalog, place an
Garland, TX 75042 order, or learn more about Ampco and
Tel 972-276-6181
Fax 972-276-5815 our products, visit Ampco online at
Toll Free 800-580-9835 www.AmpcoSafetyTools.com
E-mail: sales@AmpcoSafetyTools.com
Web: www.AmpcoSafetyTools.com
0574-04 5/3/06 10:34 AM Page 602

546-06

AMPCO SAFETY TOOLS


Non-Sparking Tools Valve Wheel Hook
Wrench, Striking Box, 12-Point
Wrench, Striking Box a2

6-Point
s d b
s
a1
l

l Number a1 a2 b d l Wt. 
l (mm) 40 30 113 13 500 720 g
American Inch (") 7520
s l Wt. (in.) 1-9/16 1-3/16 4-7/16 1/2 19-3/4 1.59 lbs.
American Inch (") Millimeter (mm) Number inch inch lbs.
s l Wt. s l  WS-1808 1-1/4 6-1/2 1.20
Number Number
 inch inch lbs. mm mm g WS-1808A 1-5/16 7-1/2 1.52
WS-11/16 11/16 6-5/16 0.8 WS-17 17 160 365 WS-1809 1-7/16 7-1/2 1.44
WS-3/4 3/4 6-5/16 0.8 WS-19 19 160 365 WS-1809A 1-1/2 8-3/4 2.54
WS-7/8 7/8 6-5/16 0.8 WS-22 22 160 365 WS-1810 1-5/8 8-3/4 2.38 Wrench, Valve Wheel
WS-1 1 6-5/16 0.8 WS-24 24 160 365
WS-1810A 1-11/16 9-7/8 3.22
WS-1811 1-13/16 9-7/8 3.04
WS-1-1/16 1-1/16 7 0.78 WS-27 27 180 365 d
WS-1811A 1-7/8 10-5/8 3.42
WS-1-1/8 1-1/8 7 0.7 WS-28 28 180 310
WS-1812 2 10-5/8 3.32
W-1-3/16 1-3/16 7-7/8 1.3 WS-29 29 180 310
WS-1813 2-3/16 11-1/2 4.32
WS-1-1/4 1-1/4 7-7/8 1.3 WS-30 30 200 590 WS-1814 2-3/8 12-1/4 4.06 a
WS-1-5/16 1-5/16 7-7/8 1.3 WS-32 32 200 590 WS-1815 2-9/16 13-1/2 5.32
WS-1-3/8 1-3/8 7-7/8 1.2 WS-33 33 200 590 WS-1815A 2-5/8 13-1/2 5.30
WS-1-7/16 1-7/16 7-7/8 1.14 WS-34 34 200 590 WS-1816 2-3/4 17 7.60 l
WS-1-1/2 1-1/2 9 1.96 WS-35 35 200 545
WS-1-9/16 1-9/16 9 1.88 WS-36 36 200 545 Driver, Hex Nut
WS-1-5/8 1-5/8 9 1.88 WS-37 37 200 520
Number d a l Wt. 
WS-1-11/16 1-11/16 9 1.8 WS-38 38 200 520
(mm) 36 60 370 650 g
WS-1-3/4 1-3/4 9 1.8 WS-41 41 230 860 a 7470
s
WS-1-13/16 1-13/16 9 1.75 WS-42 42 230 860 (in.) 1-3/8 1-1/2 14-1/2 1.43 lbs.
l
WS-1-7/8 1-7/8 10 3.1 WS-46 46 230 860 (mm) 48 80 430 1300 g
Millimeter (mm) 7472
WS-2 2 10 2.92 WS-47 47 230 820 (in.) 1-7/8 1-5/32 17 2.87 lbs.
WS-2-1/16 2-1/16 10 2.84 WS-50 50 255 1360 Number s a l  (mm) 62 102 550 2550 g
mm mm mm g 7474
WS-2-1/8 2-1/8 10 2.82 WS-52 52 255 1290 (in.) 1-7/16 4-1/64 21-3/4 5.62 lbs.
WS-2-3/16 2-3/16 10 2.68 WS-54 54 255 1270 8040 3,5 85 175 55
8042 4 85 180 55
WS-2-1/4 2-1/4 11-1/4 4.6 WS-55 55 255 1225
8044 4,5 85 180 60
WS-2-5/16
WS-2-3/8
2-5/16
2-3/8
11-1/4
11-1/4
4.4
4.4
WS-56
WS-58
56
58
255
285
1215
2040
8046 5 85 185 60 Valve Wheel Hook
8048 5,5 90 190 65
WS-2-7/16 2-7/16 11-1/4 4.3 WS-60 60 285 1995 8050 6 90 190 65 d
WS-2-1/2 2-1/2 11-1/4 4.2 WS-63 63 285 1905 8052 6,5 90 190 80 b
WS-2-9/16 2-9/16 11-1/4 4.2 WS-65 65 285 1860 8054 7 100 200 80
a
WS-2-5/8 2-5/8 13 6.84 WS-67 67 330 3220 8056 7,5 100 200 100
8058 8 100 210 100 l
WS-2-3/4 2-3/4 13 6.8 WS-70 70 330 2950
8060 9 100 210 115
WS-2-13/16 2-13/16 13 6.78 WS-71 71 330 2965 Number a b d l Wt. 
WS-2-15/16 2-15/16 13 6.32 WS-75 75 330 2875
8062 10 110 220 115
8064 11 110 220 130 (mm) 30 56 13 300 350 g
WS-3 3 14-3/16 9.21 WS-77 77 360 4130 7490
8066 12 110 230 170 (in.) 1-3/16 2-3/16 1/2 11-3/4 .77 lbs.
WS-3-1/8 3-1/8 14-3/16 9.06 WS-80 80 360 4130 8068 13 110 230 210 (mm) 35 61 13 350 600 g
WS-3-1/4 3-1/4 14-3/16 8.64 WS-82 82 360 3920 8070 14 120 240 210 7492
(in.) 1-3/8 2-3/8 1/2 13-3/4 1.32 lbs.
WS-3-3/8 3-3/8 15-1/2 14.6 WS-85 85 360 3795 8072 15 120 240 235
(mm) 40 72 16 400 680 g
WS-3-1/2 3-1/2 15-1/2 14.08 WS-88 88 395 6440 8074 16 130 250 235 7494
WS-3-5/8 3-5/8 15-1/2 13.7 WS-90 90 395 6350 8076 17 130 250 240 (in.) 1-5/8 2-3/8 5/8 15-3/4 1.50 lbs.
WS-3-3/4 3-3/4 15-1/2 13.1 WS-94 94 395 6080 (mm) 45 77 16 450 1110 g
American Inch (") 7496
WS-3-7/8 3-7/8 15-1/2 12.6 WS-95 95 395 5990 (in.) 1-3/4 3 5/8 17-3/4 2.44 lbs.
Number s a l Wt.
WS-4 4 17-1/8 25 WS-100 100 395 5670 inch inch inch lbs. (mm) 50 88 19 500 1200 g
7498
WS-4-1/8 4-1/8 17-1/8 25 WS-105 105 435 11335 8080 1/8 3-11/32 7 .12 (in.) 2 3-7/16 3-1/4 19-3/4 2.64 lbs.
WS-4-5/16 4-5/16 17-1/8 25 WS-110 110 435 11335 8082 5/32 3-11/32 7 .12 (mm) 60 104 22 600 2000 g
7502
WS-4-9/16 4-9/16 18-3/4 37.5 WS-115 115 435 11335 8084 3/16 3-11/32 7-1/4 .13 (in.) 2-3/8 4 7/8 23-5/8 4.41 lbs.
WS-4-11/16 4-11/16 18-3/4 37.5 WS-120 120 475 17000 8086 7/32 3-35/64 7-1/2 .14 (mm) 70 120 25 700 3000 g
7506
WS-4-15/16 4-15/16 18-3/4 51 WS-125 125 475 17000 8088 1/4 3-35/64 7-1/2 .18 (in.) 2-3/4 4-3/4 1 27-1/2 6.61 lbs.
WS-5-1/8 5-1/8 18-3/4 51 WS-130 130 505 23000 8090 5/16 3-15/16 8-1/4 .22 (mm) 80 136 28 800 5300 g
WS-5-3/8 5-3/8 22-5/8 66 WS-135 135 505 23000 8092 3/8 4-21/64 8-1/2 .25 7508
(in.) 3-1/8 5-3/8 1-1/8 31-1/2 11.67 lbs.
WS-5-11/16 5-11/16 22-5/8 66 WS-145 145 575 30000 8094 7/16 4-21/64 9 .37
WS-6 6 22-5/8 66 WS-150 150 575 30000 8096 1/2 4-21/64 9 .46
WS-155 155 575 30000 8098 9/16 4-23/32 9-1/2 .52
8100 5/8 5-1/8 9-3/4 .52
8102 11/16 5-1/8 9-3/4 .53

Ampco Safety Tools


To see and/or print our catalog, place an 204 N. Barnes Drive
Garland, TX 75042
order, or learn more about Ampco and Tel 972-276-6181
our products, visit Ampco online at Fax 972-276-5815
Toll Free 800-580-9835
www.AmpcoSafetyTools.com E-mail: sales@AmpcoSafetyTools.com
Web: www.AmpcoSafetyTools.com
573 5/3/06 10:36 AM Page 515

547-06

AMPCO SAFETY TOOLS

MARINE KIT M-50

Number Pieces Description Inch/lb mm/g


W-31 1 Wrecking Bar 36” 920mm
W-72 1 Wrench, Adjustable End 10” 260mm
W-73 1 Wrench, Adjustable 12” 310mm
W-74 1 Wrench, Adjustable 15” 390mm
H-2FG 1 Hammer, Engineers’ (Ball Peen) 1 lb. 455g
H-4FG 1 Hammer, Enginners’ (Ball Peen) 2.00 lbs. 900g
H-60FG 3 Hammer, Scaling 1 lb. 455g
H-70FG 1 Hammer, Sledge 5.00 lbs. 2200g
S-10g 3 Scraper, Deck 12” 300mm
S-21 3 Scraper 4” 100mm
S-27 3 Scraper, Ship 4” 100mm
S-50 1 Screwdriver (Standard Type) 8” 10 x 200mm
S-51 1 Screwdriver (Standard Type) 12” 10 x 300mm
S-80FG 2 Shovel, Scoop (D-Handle) 41” 1130mm
C-13 1 Chisel, Hand 5/8 x 6” 18 x 155mm
C-17 1 Chisel, Hand 7/8 x 9” 24 x 225mm
W-211AL 1 Wrench, Adjustable Pipe (Aluminum) 10” 255mm
W-212AL 1 Wrench, Adjustable Pipe (Aluminum) 14” 355mm
W-213AL 1 Wrench, Adjustable Pipe (Aluminum) 18” 460mm

The products above and below this line are not available from the same manufacturing source.

HANCOCK MARINE INC.

ALUMINUM BOAT HOOKS

BOAT HOOK PENDANT HOOK

Will handle rope to 1-1/2” Will handle rope to 3”


diameter. diameter.

Model # Pole Length Model # Pole Length


H-1-08 8 ft. H-2-08 8 ft.
H-1-10 10 ft. H-2-10 10 ft.
H-1-12 12 ft. H-2-12 12 ft.
H-1-14 14 ft. H-2-14 14 ft.
H-1-16 16 ft. H-2-16 16 ft.
H-1-18 18 ft. H-2-18 18 ft.
BOAT HOOK H-1-20 20 ft. H-2-20 20 ft.
POLES H-1-24 24 ft. H-2-24 24 ft.
Made of 1-1/2” O.D.
Hooks are also available in red bronze.
aluminum tubing.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
562 5/3/06 10:37 AM Page 1

548-06

Stainless Steel Blade Tools (Industrial) Solid Brass Blade Tools (Industrial)
420-series cutlery grade stainless steel Non-spark brass blades are non-magnetic.
blades. For use in the most harsh and Full tang blade construction. Nylon
abrasive environments. Full tang blade handles. U.S. Pat. 4,524,514 Heavy Duty Rounded-Tip Utility Knife Blades
construction. Nylon handles. U.S. Pat. 4,524,514 Self-Retracting Rounded blade tips help protect against
Utility Knives accidental cuts.Fits most utility knives. U.S. Pat. Pend.
Special feature; 42117 Heavy Duty Rounded-Tip Blades (5)
blade exposed only when thumb is
pressed forward on button. Blade 5 Blades/Pkg. 0.5 lb/10 pk
02080 Brass Non-Spark Putty Knife
automatically retracts into handle 42118 Heavy Duty Rounded-Tip Blades (100)
01040 Stainless Steel Putty Knife 1¹₄" / 32 mm Stiff 1.9 lb/10 pk when thumb is released from button.
100 Blades/Box 1.0 lb/1 pk
1¹₂" / 38 mm Flex 0.7 lb/5 pk For right or left hand operation.
Die cast zinc alloy construction.
01140 Stainless Steel Putty Knife Rounded-tip blade exposure; ⁵⁄₁₆"
(¹₂" w/button tab removed). Pointed-
1¹₂" / 38 mm Stiff 0.9 lb/5 pk
tip blades extend an additional ¹₁₆". 42101
42062 Self-Retracting Utility Knife
02215 Brass Non-Spark Chisel Putty Knife Long blade exposure only.
1⁵₁₆" / 33 mm Stiff 2.1 lb/10 pk 1 Blade 3.0 lb/10 pk
01240 Stainless Steel Chisel Putty Knife 42065 Self-Retracting Utility Knife (Carded)
1⁵⁄₁₆" / 33 mm Stiff 0.8 lb/5 pk Optional short/long blade exposure.
1 Blade 3.0 lb/10 pk
42066 Self-Retracting Utility Knife
Optional short/long blade exposure.
1 Blade 3.0 lb/10 pk
42067 Self-Retracting Utility Knife
02320 Brass Non-Spark Putty Knife Short blade exposure only.
01340 Stainless Steel Scraper 2" / 51 mm Stiff 2.6 lb/10 pk
1 Blade 3.0 lb/10 pk Heavy Duty Utility Knife Blade Dispensers
3" / 76 mm Flex 1.0 lb/5 pk One blade dispensed at a time. Designed to be
wall hung or fit easily into a tool box.
01440 Stainless Steel Scraper 42101 Heavy Duty Utility Knife Blade
3" / 76 mm Stiff 1.4 lb/5 pk Dispenser (100)
100 (42100) Blades 10.4 lb/10 pk
42070 Top Slide Utility Knife
3 Lockable blade extensions. 42103 Heavy Duty Utility Knife Blade
Die cast alloy construction. Dispenser (50)
1 Blade 2.3 lb/5 pk 50 (42100) Blades 0.6 lb/10 pk
02420 Brass Non-Spark Chisel Scraper
3" / 76 mm Stiff 3.0 lb/10 pk 42102 Heavy Duty Rounded-Tip Utility Knife
Blade Dispenser (100)
100 (42117) Blades 10.0 lb/10 pk
01540 Stainless Steel Joint Knife
4" / 102 mm Flex 1.0 lb/5 pk
42080 Fixed Blade
01740 Stainless Steel Joint Knife Angle Head Utility Knife
5" / 127 mm Flex 1.2 lb/5 pk Offset head. Die cast aluminum alloy
02975 Brass Non-Spark 5-IN-1 Painter’s Tool construction. Change blades without tools.
01840 Stainless Steel Joint Knife 1 Blade 2.4 lb/5 pk
Stiff 2.0 lb/10 pk 42095 Adjustable Blade
6" / 152 mm Flex 1.4 lb/5 pk Carpet Knife Fully adjustable
blade retracts for safety. Change
blade without tools.
High Carbon Steel Blade Tools 6 Blades 0.8 lb/5 pk
(Professional) Full tang blade construction.
Nylon handles. U.S. Pat. 4,524,514

Soft Grip Top Slide


Angle Head Utility Knives
3 Lockable blade extensions.
02000 High Carbon Steel Putty Knife Change blade without tools. Die cast alloy with Carpet Knife Blades Replacement blades for
1¹₄" / 32 mm Flex 0.7 lb/5 pk
soft grip sides. 42095 and similar carpet knives. Reversible
42083 Soft Grip Top Slide Angle Head Utility blades with four cutting edges each.
02005 High Carbon Steel Putty Knife Knife 42105 Carpet Knife Blades (5)
01850 Stainless Steel Joint Knife ³₄" / 19 mm Flex 0.7 lb/5 pk 1 Blade 2.5 lb/5 pk
5 Blades/Pkg. 0.5 lb/10 pk
Hammer end 6" / 152 mm Flex 1.5 lb/5 pk
02050 High Carbon Steel Putty Knife 42129 Carpet Knife Blades (100)
1¹₄" / 32 mm Stiff 0.8 lb/5 pk 100 Blades/Pkg. 0.5 lb/1 pk
02100 High Carbon Steel Putty Knife
1¹₂" / 38 mm Flex 0.7 lb/5 pk Heavy Duty Utility Knife Blades
Designed to fit most utility knives.
02150 High Carbon Steel Putty Knife
42100 Heavy Duty Blades (5)
01870 6-IN-1 Stainless Steel Painter’s Tool 1¹₂" / 38 mm Stiff 1.0 lb/5 pk
5 Blades/Pkg. 0.6 lb/10 pk
Sharp scraper blade. Putty remover.
Spreader. Half round cut-out removes paint 02250 High Carbon Steel Putty Knife 42104 Heavy Duty Blades (10) 42030 Auto-Lock Snap-Off
from paint rollers. Sharp point opens cracks 2" / 51 mm Flex 0.9 lb/5 pk 10 Blades/Pkg. 1.0 lb/10 pk
Blade Utility Knife (18 mm) Retractable
for patching. Die cast metal nail setting end blade with one piece positive lock. Stainless
built into handle. 02300 High Carbon Steel Putty Knife 42150 Heavy Duty Blades (100) steel blade track.
Hammer end, Stiff 1.2 lb/5 pk 2" / 51 mm Stiff 1.1 lb/5 pk 100 Blades/Box 0.9 lb/1 pk 3 (18 mm) Blades 2.0 lb/10 pk

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0544-04 5/3/06 11:33 AM Page 1

549-06

ARROWORTHY
PAINT BRUSHES
BHK Frame No. PHR Frame Only
Marine Flat Varnish 4 Wire Polypropylene Available in 4", 7", & 9" Sizes
White China Bristle Trim End Caps, 1/4" Steel,
Available in 1", 1-1/2", 2", Bucket Grip.
2-1/2", 3" & 4" Available in 3", 4", 7" & 9" Sizes
Order #9030 Wool Lintless
Polyester Blend Non-Shedding Fabric
45° Sash Brush Black China Small Diameter Roller Covers
Attach to any threaded pole. Chinese Bristle Lintless Non Shedding Fabric - for all paints
Available in Available in 1", 1-1/2", 2", Available in 4" and 6-1/2" Sizes,
Nylon/Polyester 2-1/2", 3" & 4" Nap Height 1/4", 3/8", 1/2", & 3/4"
& Bristle 2-1/2" & 3" Order #1610 Wool Polyester Blend - for all paints
Order #1075 for China Available in 4" and 6-1/2" Sizes,
Order #4075 for Nylon/Polyester Nap Height 3/8", 1/2"
Closed Core Covers
Woven - for all paints
Available in 4”, 7”, 9”, 12”, 14” & 18” Sizes
Available in 4" and 6-1/2" Sizes,
Nap Heights 3/8”, 1/2”, 3/4” & 1-1/4”
Nap Height 3/8"
Available in genuine lambskin,
Mohair - for high gloss semi gloss paints
1000 Chips White high or medium density
Available in 6-1/2" Size, Nap Height 3/16"
Chinese Bristle polyester, and nylon/acrylic/
Available in 1/2", 1", 1-1/2", polyester blend. Can be
2", 2-1/2", 3" & 4" purchased separately or as an
Order #1500 assembled unit with frame.

Paint Roller Tray Universal Roller Cover


100% polyester
Marine White China RWT-P Plastic 1 Qt. Capacity
100% solvent resistant
Varnish Poly Handle RWT Metal 1 Qt. Capacity
BWT-P Plastic 2 Qt. Capacity polypropylene core
Available in 1",1-1/2", Available in 3", 4", 7", 9", 14" & 18"
2", 2-1/2", 3" & 4" BWT Metal 2 Qt. Capacity
BWT-J Metal Jumbo 4 Qt. Capacity Order #9P3 - Nap Height 3/8"
Order #5035 Order #9P4 - Nap Height 1/2"
The products above and below this line are not available from the same manufacturing source.
ZIMMERMAN PACKING & MFG., INC.

Soft-Face Hammer with Cylindrical Head


Hammer’s non-marring, non-
sparking surface is made of hot
cast urethane which provides MM 2
safety while resisting dents, cuts,
and surface abrasion. Its 360°
surface area is ten times greater
than other hammers of compa-
rable weight and size, which
distributes normal surface
deterioration from repeated
blows across a wider area.
The hammer is impervious
to oil and most chemicals.
MM 3
The cylindrical head provides a MM 1.2
counter-rotational internal action
that stabilizes any off-center hits A B C Wt.
and eliminates torque; the handle MM 1.2 2" 1-5/16" 9-7/16" 1-1/4 lbs.
is textured and contoured for MM 2 2-1/2" 1-11/16" 9-7/8" 2 lbs.
better grip. MM 3 3" 2" 10-3/16" 3 lbs.

Designed, Engineered & Manufactured by


ZIMMERMAN PACKING & MFG., INC., 2768 Highland Avenue, Cincinnati, Ohio 45212 USA
1-800-255-1767 • (513) 731-1767 • FAX (513) 731-9200 • WEB: www.zimmermanpacking.com
3068 5/3/06 10:46 AM Page 642

550-06

THE WOOSTER BRUSH COMPANY


FINISHING BRUSH #4731
Gold nylon/brown China bristle blend for fine finishing with oil-based or alkyd paints, low VOCs, #4731
enamels, acrylics. Elastomeric handle has a soft, non-slip surface; will not crack, swell or peel.
Sizes: 2”, 2-1/2” & 3”.

FIRM SHORT-HANDLE BRUSH #4187


Purple nylon/sable polyester blend for all latex, acrylics,
water-based enamels or urethanes. Short elastomeric handle
#4187 adds control and clearance in tight spaces. Sizes: 2”, 2-1/2”.

BRISTLE SHORT-HANDLE BRUSH #Z3215


Natural 100% white China bristle for oil-based paints or
enamels, stains, varnishes, urethanes. Soft, flexible
elastomeric handle, only 2-1/4” long for tight spaces. Size 2”.
#Z3215

HOCKEY STICK BRUSH #J4621


#J4621
Angle sash with 29” long wood handle to reach relatively inaccessible places. Firm
nylon/polyester blend for all acrylic, latex, or oil coatings. Size 3”.

HAND-HELD PAIL #8619


Works with brushes and rollers. Built-in roll-off area, 5-1/2” wide.
Strong, integrated magnet holds a brush. Elastomeric security
strap automatically expands for larger hands.
DISPOSABLE LINERS #8629 – Rigid, form-fitting liners (3-pack)
for the 8619 pail. Allows quick color changes and instant cleanup. #8629
#8619

18” ROLLER FRAME #BR045


Rust-proof polypropylene construction. Reinforced threads for extension pole use,
Sherlock GT® compatible. For all 18” roller covers, standard or jumbo cores. #BR045

ADJUSTABLE MINI ROLLER FRAME #RR323


Adjusts four directions to paint different angles or faces of a surface. Great for railings, decks, cabinets, pipes, beams.
Works with both 4-1/2” and 6-1/2” rollers, listed in the chart below.
MINI ROLLER 2-PACKS
Available in 4-1/2” or 6-1/2” length to use with #RR323, RR013, or RR014 cage frames. Golden yellow fabric RR301
offers exceptional capacity and resists matting. White plush fabric RR312 reaches into textures, provides huge paint
pickup and release.
Cat. No. Material Uses
RR301 Golden yellow fabric All flat or satin paints, stains, sealers RR301

RR302 Shed-resistant white fabric


All paints, enamels, primers, adhesives
RR303 with golden pinstripe

Shed-resistant white
RR304 Enamels, varnishes, urethanes, epoxies
blended mohair fabric
#RR323 RR306 Polyamid striped yarn fabric All flat paints, stains, sizings
RR312
All flat, satin or eggshell paints,
RR312 White plush fabric
stains, sealers, primers

The Wooster Brush Company


604 Madison Avenue, Wooster, Ohio 44691-6010 USA
1-800-392-7246 • 1-330-264-4440 • fax 1-330-263-0495
website www.woosterbrush.com • e-mail customerservice@woosterbrush.com
Manufacturer of High-Performance Paint Applicators & Equipment Since 1851
543 5/3/06 10:47 AM Page 573

551-06

THE L. S. STARRETT CO.


OUTSIDE MICROMETER CALIPERS OUTSIDE MICROMETER
No. 230 Series:
0 to 1”
CALIPERS
No. 436 Series
No. 230M Series: 0 to 6”
0 to 25 mm (metric)
No. 436M Series
Satin-chrome finish. Micro-lapped finish 0 to 150 mm
on anvil and spindle faces. One-piece spindle. Hardened threads—ground
from the solid and stabilized. Rigid one-piece frame-drop forged steel. Forged frames with black enamel finish. Satin-chrome finish on
sleeve and thimble. Micro-lapped finish on anvil and spindle faces.
Cat. No. Range Graduation Cat. No. Range Graduation One-piece hardened spindle with threads ground from the solid and
230P 0 to 1” .001” T230RL 0 to 1” .0001” stabilized. Also available with carbide measuring faces. Specify “X”
230RL 0 to 1” .001” T230XRL 0 to 1” .0001” after catalog number.
230FL 0 to 1” .001” T230FL 0 to 1” .0001” End Measuring Rods*
T230XFL 0 to 1” .0001” Range Graduation Cat. No. Cat. No.
METRIC 0 to 1” 436.1P-1† —
V230MXFL 0 to 25 mm 0.001 mm 1 to 2” .001” 436.1P-2 234B-1
V230MXRL 0 to 25 mm 0.001 mm 2 to 3” 436.1P-3 234B-2
0 to 1” 436.1RL-1† —
1 to 2” 436.1RL-2 234B-1
2 to 3” 436.1RL-3 234B-2
.001”
Electronic Digital Micrometers 3 to 4”
4 to 5”
436.1RL-4
436.1RL-5
234B-3
234B-4
(without output) No. 734 Series: 0-1” (0-25 mm) 5 to 6” 436.1RL-6 234B-5
This is a basic electronic micrometer. It has no output but has the ease of 0 to 1” 436.1FL-1 —
handling and accuracy features of a full-function micrometer. 1 to 2” .001” 436.1FL-2 234B-1
2 to 3” 436.1FL-3 234B-2
Specifications 0 to 1” .0001” T436.1XP-1 —
Desc. Inch mm 0 to 1” T436.1XRL-1 —
Resolution .00005 0.001 1 to 2” T436.1XRL-2 234B-1
Accuracy ±0.0001 ± 0.002 2 to 3” T436.1XRL-3 234B-2
.0001”
3 to 4” T436.1XRL-4 234B-3
Resolution Range
Cat. No. EDP No. 4 to 5” T436.1XRL-5 234B-4
in. mm in. mm
5 to 6” T436.1XRL-6 234B-5
734XFL-1 64253 .00005 0.001 0–1 0 – 25
0 to 1” T436.1XFL-1 —
734MXFL-25 65442 0.001 0 – 25
1 to 2” T436.1XFL-2 234B-1
949 63874 Case Only
2 to 3” T436.1XFL-3 234B-2
PT61120 65446 One 3-Volt Battery No. CR2450 .0001”
3 to 4” T436.1XFL-4 234B-3
4 to 5” T436.1XFL-5 234B-4
5 to 6” T436.1XFL-6 234B-5
Micrometer Depth Gages METRIC
No. 440 Series: 0-9” 0 to 25 mm 436.1MRL-25 —
No. 440M Series: 0-225 mm 25 to 50 mm 436.1MRL-50 234MB-25
No. 445 Series: 0-9” 50 to 75 mm 436.1MRL-75 234MB-50
0.01 mm
No. 445M Series: 0-225 mm 75 to 100 mm 436.1MRL-100 234MB-75
The depths of holes, slots, shoulders and projections 100 to 125 mm 436.1MRL-125 234MB-100
can be measured to .001” or 0.01 mm with these tools. 125 to 150 mm 436.1MRL-150 234MB-125
0 to 25 mm 0.01 mm 436.1MXFL-25 —
Cat. No.
Graduation Range Base Length No. of Rods Rod Dia.
0 to 25 mm V436.1MXRL-25 —
Without Ratchet Stop, With Lock Nut, in Case
25 to 50 mm V436.1MXRL-50 234MB-25
440Z-3L .001” 0 to 3” 2-1/2” 3 1/8”
50 to 75 mm V436.1MXRL-75 234MB-50
440Z-6L .001” 0 to 6” 2-1/2” 6 1/8” 0.001 mm
75 to 100 mm V436.1MXRL-100 234MB-75
440Z-9L .001” 0 to 9” 2-1/2” 9 1/8”
100 to 125 mm V436.1MXRL-125 234MB-100
With Ratchet Stop and Lock Nut, in Case
125 to 150 mm V436.1MXRL-150 234MB-125
440Z-3RL .001” 0 to 3” 2-1/2” 3 1/8”
† These micrometers have decimal equivalents on the outside shell
440Z-6RL .001” 0 to 6” 2-1/2” 6 1/8”
* End measuring rods are sold separately
440Z-9RL .001” 0 to 9” 2-1/2” 9 1/8”
445AZ-3RL .001” 0 to 3” 3” 3 5/32”
445BZ-6RL .001” 0 to 6” 4” 6 5/32” KEY TO MICROMETER NUMBERING SYSTEM
445BZ-9RL .001” 0 to 9” 4” 9 5/32” P– Plain X – Carbide V – 0.001 mm Reading ZZ – Case Only
445DZ-3RL .001” 0 to 3” 6” 3 5/32” L– Lock Nut Measuring Faces Z – With Case Prefix S –
440MZ-75RL 0.01 mm 0 to 75 mm 63.5 mm 3 3.2 mm R– Ratchet Stop T – .0001” Reading Micrometer Set
440MZ-150RL 0.01 mm 0 to 150 mm 63.5 mm 6 3.2 mm F– Friction Thimble M – Metric
440MZ-225RL 0.01 mm 0 to 225 mm 63.5 mm 9 3.2 mm

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
546 5/3/06 10:48 AM Page 1

552-06

THE L. S. STARRETT CO.


OUTSIDE MICROMETER CALIPERS SOLID-ROD INSIDE
Tubular “C” or Bow Type—Interchangeable Anvils MICROMETER SETS
No. 724 Series: 12” to 60” No. 124 Series: 2” to 32”
No. 124M Series:
50 mm to 800 mm (Metric)
Satin-chrome finish on heads.
Hardened and ground anvils
on rods, adjustable for length – head
anvil hardened and ground. One-piece
screw with hardened threads ground
from the solid and stabilized.
Hollow tubular steel frame with black wrinkle finish. Satin-chrome
finish on sleeve and thimble. Micro-lapped measuring faces. No. 124H: 6-1/2” handle to provide reach into holes.
One-piece spindle. Hardened threads—ground from the solid No. Cat. No.
Range Movement CaL No.
and stabilized. Standards are solid type with insulated handles (Graduation) of Screw
Measuring Collars Without
In Case
up to 35” inclusive. Longer standards are tubular type Rods Case
with insulated handles. 2 to 8” (.001”) 1/2” 6 One 1/2” 124A 124AZ
2 to 12” (.001”) 1/2” 10 One 1/2” 124B 124BZ
Supplied without ratchet stop, with lock nut, in case.
One 1” and
Graduation: .001” 8 to 32” (.001”) 1” 4 124C 124CZ
Two 2”
Range Cat. No. Standards (Furnished) 2 to 32” 1/2”& 1” Comprises Set Nos.
12 to 18” 724LZ-18 12, 13, 14, 15, 16, 17” 124D 124DZ
(.001”) (2 heads) 124A and 124C
18 to 24” 724LZ-24 18, 19, 20, 21, 22, 23” 50 to 200 mm
24 to 30” 724LZ-30 25, 27, 29” 13 mm 6 One 12 mm 124MA 124MAZ
(0.01 mm)
30 to 36” 724LZ-36 31, 33, 35” 50 to 300 mm
36 to 42” 724LZ-42 37, 39, 41” 13 mm 10 One 12 mm 124MB 124MBZ
(0.01 mm)
42 to 48” 724LZ-48 43, 45, 47” 200 to 800 mm One 25 mm &
48 to 54” 724LZ-54 49, 51, 53” 25 mm 4 124MC 124MCZ
(0.01 mm) Two 50 mm
54 to 60” 724LZ-60 55, 57, 59” 50 to 800 mm 13 & 25 mm Comprises Set Nos.
124MD 124MDZ
(0.01 mm) (2 heads) 124MA and 124MC

AMERICAN STANDARD WIRE GAGE TAP AND DRILL GAGE


FOR NON-FERROUS METALS No. 185: Range 1 to 60 –
No. 281 – Range 0 to 36 – HARDENED HARDENED
This gage is for non-ferrous metals Gage shows the correct size tap
as adopted by brass manufacturers. drill for most machine screw taps
Used to gage sheets, plates and wire made in National Fine or National
of metals such as copper, brass, Coarse Thread Series and will
aluminum, etc. The gage has decimal leave the right amount of stock for
equivalents on approximately 65% full thread. Gage also shows the correct body size
the reverse side. Satin finish and hardened. drill to use and provides 60 holes marked with the number size and
decimal equivalent of the drill that fits each hole.
Example: A size 2-56 tap (No. 2 tap with 56 pitch) calls for a No. 50
FILLET OR RADIUS GAGES tap drill and a No. 44 body drill. Gage is hardened and has a black
matte finish. Approx. size: 5/64” thick by 2-5/16” wide by 6-1/4” long.
No. 178 and No. 178M (Metric)
Cat No. Tap Size Tap Drill Body Drill Drill Gage Nos.
With Locking Device
185 2-56 to 1/4-28 50 to 3 44 to 1/4 1 to 60

DRILL GAGE
No. 187:
Cat. No. Number Leaves Range Concave and Convex
Range 1/16 to 1/2” – HARDENED
178A 30 1/32 to 1/4” by 64ths
178B 32 17/64 to 1/2” by 64ths The size of a twist drill from 1/16 to 1/2” by 64ths can be
1 to 7 mm; 1 to 3 mm by 0.25 mm;
determined. The gage has a total of 29 holes, each marked with
178MA 34 the drill size in inches and the decimal equivalent. Gage is
3 to 7 mm by 0.5 mm
178MB 32 7.5 to 15 mm by 0.5 mm hardened and has a black matte finish. Approx. 5/64” thick by
2-5/16” wide by 6-1/4” long.
No. 797B Electronic Calipers No. 120 Series Dial Calipers
(with output)

0-6" (0-150 mm)


Athol, MA 01331 USA 0-6" Red, black or white dial
0-8" (0-200 mm) Tel: 978-249-3551 • Fax: 978-249-8495 0-9", 0-12", white dial
• .001" Grad • 0-300mm -- yellow dial
0-12" (0-300 mm) Internet Address: http://www.starrett.com • Hardened, Stainless Steel Bar,
Linear accuracy meets DIN 862 Resolution: .0005" E-Mail Address: general@starrett.com Measuring Surfaces, Rack, Gears
545 5/3/06 10:51 AM Page 575

553-06

THE L. S. STARRETT CO.


CENTER GAGES STEEL RULES
No. C391, No. C396, No. C398M NO. 1 GRADUATION
➞ First Edge: 10ths – 20ths – 50ths – 100ths
English or Metric FRONT SIDE

English Graduation
Spring-tempered steel with satin chrome finish. ➞ Second Edge: 12ths – 24ths – 48ths
Cat. No. Description ➞ Fourth Edge: 14ths – 28ths
C391 American Unified National Standard, 60° REVERSE SIDE
C396 Whitworth or English Standard, 55° ➞ Third Edge: 16ths – 32nds – 64ths
C398M Metric Standard, 60° NO. 4R GRADUATION
➞ First Edge: 64ths
FRONT SIDE
THICKNESS GAGES ➞ Second Edge: 32nds
➞ Fourth Edge: 8ths
English or Metric REVERSE SIDE
➞ Third Edge: 16ths
Cat. Width Thickness
No. 66
Length No. Graduation (approx.) (approx.) Type
6” C601-6 No. 1—10ths, 20ths, 50ths, 100ths; 3/4” 3/64” Satin Chrome—
12ths, 24ths, 48ths; 16ths, 32nds, Spring
64ths; 14ths, 28ths Tempered
12” C601-12 No. 1—10ths, 20ths, 50ths, 100ths; 1” 3/64” Satin Chrome—
12ths, 24ths, 48ths; 16ths, 32nds, Spring
No. 172AT
64ths; 14ths, 28ths Tempered
Leaves made of tempered steel. Leaves removed or replaced. Satin Chrome—
36” C604R-36 No. 4R—8ths, 16ths, 32nds, and 64ths 1-1/4” 3/64”
Includes Locking Device. Spring Tempered
NO. 30 GRADUATION
Size Number Range
FRONT SIDE

Metric Graduation
Cat. No. Leaves Leaves Leaf Thicknesses
THICKNESS GAGES WITH STRAIGHT LEAVES (inches) ➞ Second Edge: 1/2 mm
172A 1/2 x 3-1/32 9 .0015, .002, .003, .004, .006, .008, .010, .012, .015 ➞ Fourth Edge: 1/2 mm
66 1/2 x 3-1/32 26 .0015, .002, .0025, .003, .004, .005, .006, .007, REVERSE SIDE
.008, .009, .010, .011, .012, .013, .014, .015, .016, ➞ Third Edge: mm
.017, .018, .019, .020, .021, .022, .023, .024, .025 NO. 35 GRADUATION
THICKNESS GAGES WITH TAPERED LEAVES (inches) ➞ First Edge: mm
172AT 1/2 to 1/4 x 3-1/32 9 .0015, .002, .003, .004, .006, .008, .010, .012, .015 FRONT SIDE
66T 1/2 to 1/4 x 3-1/32 26 .0015, .002, .0025, .003, .004, .005, .006, .007, ➞ Second Edge: 1/2 mm
.008, .009, .010, .011, .012, .013, .014, .015, .016, ➞ Fourth Edge: mm
.017, .018, .019, .020, .021, .022, .023, .024, .025
REVERSE SIDE
METRIC THICKNESS GAGES WITH STRAIGHT LEAVES ( mm)
66MA 12.7 x 77 20 .05, .10, .15, .20, .25, .30, .35, .40, .45, .50, .55, .60, ➞ Third Edge: 1/2 mm
.65, .70, .75, .80, .85, .90, .95, 1.0 Cat. Width Thickness
METRIC THICKNESS GAGES WITH TAPERED LEAVES ( mm) Length No. Graduation (approx.) (approx.) Type
172MBT 12.7 to 7 x 144 9 .04, .05, .06, .07, .08, .10, .15, .20, .30 150 mm C330-150 No. 30—1/2 mm one side; 12.7 mm 0.4 mm Flexible
mm and 1/2 mm on reverse
300 mm C330-300 No. 30—1/2 mm one side; 12.7 mm 0.4 mm Flexible
mm and 1/2 mm on reverse
STEEL WIRE GAGE – HARDENED 1000 mm
(1 meter)
C635-1000 No. 35— mm and 1/2 mm
both sides
32 mm 1.2 mm Spring Tempered

No. 287— Range 0 to 36


This gage is designed for gaging steel wire and
drill rod to the American Steel & Wire Company STEEL SCREW
(also known as United States Steel Wire Gage).
Decimal equivalents are given on the back.
PITCH GAGES
Satin finish. V, Unified, American National,
Cat. No. Range Gage Numbers
Whitworth Standard and Metric
287 0 to 36 Cat. No. of Range of
No. Leaves Threads per Inch Threads per Inch Description
V, UNIFIED, AMERICAN NATIONAL—60° THREADS (inches)
155 27 2-1/4 to 28 2-1/4, 2-3/8, 2-1/2, 2-5/8, 2-3/4, 2-7/8, With Locking
TELESCOPING GAGES 3, 3-1/4, 3-1/2, 4, 4-1/2, 5, 5-1/2, 6, 7, 8,
9, 10, 11, 12, 13, 14, 16, 18, 20, 24, 28
Device and 60°
Center Gage
No. 229 Series 473 30 6 to 60 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, With Positive Stop
1/2” to 6” (12 mm to 150 mm Metric) 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, and 11-1/2 and 27
34, 36, 38, 40, 42, 48, 50, 56, 60 Pipe Thread Pitches
Features a handle, one rigid contact arm, one WHITWORTH STANDARD—55° THREADS (inches)
spring-tensioned telescoping contact arm. 476 30 3-1/2 to 60 3-1/2, 4, 4-1/2, 5, 6, 7, 8, 9, 10, 11, 12, With Positive
Cat. No. Range, English Range, Metric 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, Stop
28, 30, 32, 36, 40, 44, 48, 50, 60
229A 1/2” to 3/4” 13 mm to 19 mm
METRIC—INTERNATIONAL STANDARD—60° THREADS (mm)
229B 3/4” to 1-1/4” 19 mm to 32 mm
Range of Pitches Pitches in Millimeters
229C 1-1/4” to 2-1/8” 32 mm to 54 mm 156M 28 .25 to 2.50 .25, .30, .35, .40, .45, .50, .55, .60, .65, .70, With Locking
229D 2-1/8” to 3-1/2” 54 mm to 89 mm .75, .80, .85, .90, 1, 1.10, 1.20, 1.25, 1.30, Device
229E 3-1/2” to 6” 89 mm to 150 mm 1.40, 1.50, 1.60, 1.70, 1.75, 1.80, 1.90, 2, 2.50
S229FZ Set of Three (3) No. 229 A, B, C in Case 159M 28 .5 to 11.5 .5, .75, 1, 1.10, 1.25, 1.5, 1.75, 2, 2.5, 3, With Locking
S229GZ Set of Five (5) No. 229 A, B, C, D, E in Case 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9 Device and 60°
9.5, 10, 10.5, 11, 11.5 Center Gage

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
546 5/3/06 10:52 AM Page 1

554-06

THE L. S. STARRETT CO.


PRECISION MEASURING
PRECISION GROUND FLAT STOCK
TAPES Regular and Oversize
Precision Ground Flat
can be used for all
types of parts having
two flat parallel
surfaces.
ControLok® tapes automatically lock when pressure is released. Three types of material in a complete range of sizes are available to meet your
All tapes have durable UV top coated blades; 3/4” and 1” tapes specific needs:
have blade protectors. Magnesium tape has all metal case. Nos. 495 and 496 are (AISI 01) oil hardening tool steels are dimensionally
Magnesium Tape stable and can be used for all intricate work, including work with thin sections.
Catalog No. EDP No. Case Color No. 495 available in lengths from 18” to 36”, in thickness from 3/16” to 1”.
MG1-25 66993 Magnesium No. 496 from 1/64” to 2”.
ControLok® Models - English Reading Nos. 497 and 499 are A-2 5% chromium air-hardened steel. These steels have
1/2” x 12’ high wear and abrasion resistance. Available in 18” and 36” lengths. No. 497
AC12-12 65336 Chrome in thickness from 1/16” to 2” and No. 499 oversize from 1/8” to 3”.
AO12-12 65337 Neon Orange
AY12-12 65927 Yellow No. 498 is used where deep hardening is not necessary, although it can be
3/4” x 16’ carburized or case hardened. 24” lengths in thickness from 1/16” to 2-1/2”.
AC34-16 65304 Chrome
AO34-16
AY34-16
65305
65926
Neon Orange
Yellow TANK GAGING TAPES
1” x 25’
For tank gaging of heavy and light oils,
AC1-25 65284 Chrome
AO1-25 65285 Neon Orange
gasoline, etc. Heavy-duty steel frame
AY1-25 65925 Yellow with black, rust-resistant finish and
1” x 33’
removable hardwood handle. Steel tape
with satin chrome finish. One-piece
AC1-33 66396 Chrome
AY1-33 66397 Yellow winding handle locks the line
at any setting. Packed one per box.

No. Blade Length Wt./Box


Tru-Lok® Models - English Reading with WITH 515C PLUMB BOB (20 oz.)
1/2” x 12’ 515C C507CB-50 50 ft. 3.69 lbs.
C12-12 65418 Chrome Plumb C507CB-66 66 ft. 4.25 lbs.
CH12-12 65942 Charcoal Bob
C507CB-100 100 ft. 4.81 lbs.
O12-12 65419 Neon Orange C507MCB-15M 15 m 3.69 lbs.
Y12-12 65943 Yellow C507MCB-20M 20 m 4.25 lbs.
PLUMB BOBS
3/4” x 12’ C507MCB-30M 30 m 4.81 lbs.
C34-12 66169 Chrome
CH34-12 66168 Charcoal
3/4” x 16’ No. Bob Weight No. Bob Weight
C34-16 65386 Chrome 515B 5-1/2 oz. 515E 15 oz.
CH34-16 65937 Charcoal 515C 20 oz. 515F 20 oz.
O34-16 65387 Neon Orange 515MD .63 kg
Y34-16 65938 Yellow
3/4” x 25’ 515B 515C 515MD 515E 515F
C34-25 65402 Chrome
CH34-25 65940 Charcoal STEEL LONG-LINE
1” x 25’
C1-25 65366 Chrome
MEASURING TAPES
CH1-25 65932 Charcoal No. C530 Series has a hard-wearing satin chrome finish line.
O1-25 65367 Neon Orange The well-designed case is made of steel covered with tough,
Y1-25 65933 Yellow durable red vinyl. The long handle and large drum give extra
1” x 30’
leverage and smoother operation when reeling in the line.
C1-30 65382 Chrome
CH1-30 66209 Charcoal English Reading
O1-30 65383 Neon Orange
Blade Catalog EDP Replacement Lines Only
Y1-30 65936 Yellow
Length Graduation Style No. No. Catalog No. EDP No.
1” x 33’
50’ HC530-50 55591 LHC530-50 55515
C1-33 66407 Chrome L1 – Inch
100’ HC530-100 55593 LHC530-100 55597
Y1-33 66408 Yellow
English metric/metric tapes also available. Specify if desired. All tape lines are 3/8” (9.5 mm) wide.

PRECISION TOOLS Sold throughout the world


Call us to locate your local Marine Distributor of Starrett products
The L. S. Starrett Company • Athol, Massachusetts 01331, U.S.A.
Telephone: 978-249-3551 • Fax: 978-249-8495 • Internet Address: http://www.starrett.com • E-Mail Address: general@starrett.com
547 5/3/06 10:54 AM Page 577

555-06

THE L. S. STARRETT CO.


HAND HACKSAW BLADES
High Speed Steel Blades
For use when work is held securely Bi-Metal Unique™ Hacksaw Blades
and not subject to bending or Two strips of high speed steel wires are joined to a backing steel in a Carbon Steel Blades
twisting stresses. Blades hold the solid phase, using the principle of solid state diffusion bonding, which is
edge when cutting hard-to- totally different from traditional weld or laser bonding processes. This All-purpose blades
machine alloys, maintaining proprietary (patent pending) process generates 170% more weld contact for cutting mild steel,
straightness of cut. Uniformly area than existing bi-metal high speed steels, for less fracture and copper, brass, aluminum
hardened throughout. Heavy-duty breakage at the HSS/backing material interface. The exceptionally strong and similar materials.
blades are available for hand or teeth develop a groove after initial use. This produces dual chips that are Blades have a hardened
light machine sawing. more easily removed from the cut. When used with coolant, more of it cutting edge with a
flows to the cutting surface. This is the Split-Chip Advantage™. flexible back.
Redstripe®
Bluestripe® Bi-Metal Unique™/ Ground Tooth Greenstripe® Bi-Metal Unique™/ Milled Tooth Grey-Flex®
Length x Width TPI / Catalog EDP
x Thickness (25 Length x Width TPI / Catalog EDP Length x Width TPI / Length x Width TPI /
No. No. Catalog EDP Catalog EDP
Inch (mm) mm) x Thickness (25 No. No. x Thickness (25 No. No. x Thickness (25 No. No.
Inch (mm) mm) Inch (mm) mm) Inch (mm) mm)
10” x 1/2” x 025” 18 RS1018 40019
10” x 1/2” x .025” 18 BS1018 40327
(250 x 13 x 0.65) 24 RS1024 40020 10” x 1/2” x .025” 18 SF1018 40028
10” x 1/2” x .025” 18 GF1018 40011
32 RS1032 40021 (250 x 13 x 0.65) 24 BS1024 40328 24 SF1024 40029 24 GF1024 40012
(250 x 13 x 0.65) (250 x 13 x 0.65)
14 RS1214 40022 14 BS1214 40329 32 SF1032 40030 32 GF1032 40013
12” x 1/2” x .025” 18 RS1218 40023 12” x 1/2” x .025” 18 BS1218 40330 14 SF1214 40031 14 GF1214 40014
(300 x 13 x 0.65) 24 RS1224 40024 (300 x 13 x 0.65) 24 BS1224 40331 12” x 1/2” x .025” 18 SF1218 40032 12” x 1/2” x .025” 18 GF1218 40015
32 RS1232 40025 32 BS1232 40332 (300 x 13 x 0.65) 24 SF1224 40033 (300 x 13 x 0.65) 24 GF1224 40016
Heavy-Duty – Redstripe Heavy-Duty – Bluestripe® 32 SF1232 40034 32 GF1232 40017
12” x 5/8” x 032” 14 RS1214-3 40026 12” x 5/8” x 032” 14 BS1214-3 40289 NOTE: Packed 100 blades per box (10 bundles, 10 blades per bundle). Heavy-duty
(300 x 16 x 0.80) 18 RS1218-3 40027 (300 x 16 x 0.80) 18 BS1218-3 40290 blades packed 10 blades per box only. Also available in visual pack—2 or 10 per blister
card with information in English, Spanish and French for North and South America.

All-Purpose Hole Saws


These saws cut any wood, metal, or plastic. They feature variable-pitch teeth and a cutting depth of 1-5/8”
(41 mm). Style “A” is with arbors and saws sold separately. Style “B” is our arbored hole saw which includes
a completely assembled saw with arbor and drill. Quickshot offers unique advantages, like the ability to replace
worn saws up to the 3-7/8” (98 mm) size. Arbor has solid shank for a 3/8” chuck.
SIZES: (Inches) 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16,
1-1/2, 1-9/16, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 2, 2-1/16, 2-1/8, 2-1/4, 2-5/16, 2-3/8, 2-1/2, 2-9/16, 2-5/8,
2-3/4, 2-7/8, 3, 3-1/8, 3-1/4, 3-3/8, 3-1/2, 3-5/8, 3-3/4, 3-7/8, 4, 4-1/8, 4-1/4, 4-3/8, 4-1/2, 4-3/4, 5, 5-1/2, 6,
Style B Style A 6-5/16, 6-5/8, 6-31/32, 8-9/36.
(Millimeters) 14, 16, 17, 19, 21, 22, 24, 25, 27, 29, 30, 32, 33, 35, 37, 38, 40, 41, 43, 44, 46, 48, 51, 52, 54, 57,
59, 60, 64, 65, 67, 70, 73, 76, 79, 83, 86, 89, 92, 95, 98, 102, 105, 108, 111, 114, 121, 127, 140, 152, 160, 168,
177, 210.
Adjustable Hacksaw Frames M1® All-Purpose Lubricant/Rust Preventative
No. K151 open grip Prevents rust and corrosion
No. K152 closed grip M1 leaves a micro-thin, airtight coating
Economy No. K150E closed grip that provides lasting protection.
Nos. K151 and K152 are heavy-duty Displaces moisture and wetness
K145 M1 burrows under moisture, driving it to
frames that accept 8, 10 or 12” Heavy-Duty High- the surface where it will readily evaporate.
(200, 250 or 300 mm) blades which
can be mounted in any one of four Tension Hacksaw Frame A nonconductor, M1 can be sprayed on
cutting directions, tensioned by a No. K145 closed grip electrical equipment to prevent moisture-
single wing nut. Red handles are easy This high-tension frame has caused short circuits. Its residual thin film
to see on a crowded workbench. an easy-to-use adjusting lever sheds moisture, protects surfaces for months
Furnished with one high-speed steel requiring minimal turns to tension (indoor or protected outdoor storage).
blade. No. K150E has a lighter-duty the blade up to 28,000 p.s.i. (2000 Penetrates and frees rusted parts
design and accepts 10 or 12” (250 or kgs/cm2). High-tension prevents Cleans and protects metal surfaces
300 mm) blades. Furnished with one twisting and binding of the blade Lubricates and stops squeaks
all-purpose carbon steel blade. when bearing down. Recommend M1 has instant lubricating properties
using only Bluestripe bi-metal that spread into hard-to-get-at places.
Hacksaw Frames blades. One furnished with frame.
Description Throat Depth Catalog No. EDP No. Cat. No. EDP No. Description
12” (300 mm) Heavy-Duty 4-3/8” (110 mm) K145 67818 M-1.01 93221 1 gal. container
High-Tension (Closed Grip) M-1.05 93227 5 gal. pail w/plastic pull-out spout
Heavy-Duty Adjustable (Open Grip) K151 60133 M1.53 93233 53 gal. drum
3-3/4” (95 mm)
Heavy-Duty Adjustable (Closed Grip) K152 60134 M-1.15 93251 1 pt. empty bulk dispenser w/ trigger spray – case of 4
Light-Duty Adjustable (Closed Grip) 3-1/2” (83 mm) K150E 65869 M1 95173 95173 12 oz. aerosol can – case of 12

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0550-04 5/3/06 10:55 AM Page 578

556-06

BROWN & SHARPE MFG. CO.


SHOP TOOLS
Dial Bore Gage Combination Kit
Dial Unit: Indicating mechanism is incorporated into the aluminum housing for maximum
protection.
Gage Heads: Matched components are housed in a phosphor bronze casting. Precisely
machined to insure positive diameter centralization and precise Gage plunger motion transfer.

Measuring Tool EDP


Range No. No.

1" to 8" B1-K2345 33249

Adjustable Parallels
Used as parallels for checking, marking, or positioning work. Also used for
measuring inside dimensions of recesses or slots, or for setting tools. Each parallel
consists of two tapered parts, dovetailed together. 6 Pc. Set Range: 3/8" to 2-1/4"
Measuring Tool EDP
Range No. No.

3/8" to 2-1/4" 599-673-20 44516

Value Line 5" Sine Bar


Measures the desired angle in a machine setup. Hardened and precision
ground. 1" body size. 5" distance between centers of rolls within .0003". Top
parallel to bottom of rolls within .0002". Supplied with back plate.
Tool EDP
No. No.

599-291-500 26986

Ultra Precision
12 Pc. Angle Block Set Ultra Precision 1-2-3 Blocks
Features: FEATURES
• Precision ground hardened steel. • Ease Hardened (HRC 55-60)
• Angular accuracy .0001" per inch, ± 30 arc sec. • Squareness on all sides to .0001".
• 3" long x 1/4" thick. • Complete in “shop-hardened”
• Simple, quick angle set-ups. molded case.
• Eliminate calculations & avoid errors.
• Complete set of 12 blocks: 1/4°, 1/2°, Set consists of a pair of 1x2x3 inch
1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°. blocks, 5) 3/8-16 stainless steel
• All complete with a protective socket head cap screws & hex key.
“shop-hardened” molded case.
Tool EDP Tool EDP
No. No. No. No.

599-921-18 26883 599-750-10 26764

1/32" Ultra Thin Parallel Set - 10 Pair Set 1/8" Parallel Set - 10 Pair Set
Features: *Height specifications Features: *Height specifications
relate to consistency
• Parallel to ± .0001" within each pair; • Parallelism ± .0002" relate to consistency
• Paired ±.0001 in height* absolute height is
• Paired in height ± .00015"
within each pair;
absolute height is
nominal.
• Hardened to 50 HRC • Hardness 58-63 HRC nominal.
• Includes shop hardened protective molded case
• Size: 6" long by 1/32" wide Set includes 10 pairs with 1/8" widths of:
Set includes 10 pairs with 1/32" widths: 1/2", 5/8", 1/2", 5/8", 3/4", 7/8", 1",1-1/8", 1-1/4", 1-3/8",
3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8". 1-1/2", 1-5/8".
Tool EDP Tool EDP
No. No. No. No.

599-921-20 26884 599-921-10 86615

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
551-04 5/3/06 10:56 AM Page 1

557-06

BROWN & SHARPE MFG. CO.

CALIPERS
®
Dial-Cal Dial Calipers • Series MV45
T-Bar Base Attachment
(Fits All B&S Dial-Cals)

599-579-4 599-579-5

• Stainless Steel Construction • 1.25" Diameter Rotating Dial with Lock • Adjustable Zero Set
• Anti-backlash, Shockproof Design • Measure Four Ways: Inside, Outside, Depth, and Step
Range Jaw Length Tool EDP
Description Grad. per Rev. Face External No. No.
0-6" Dial-Cal® .001 .100 White 1.5" 599-579-4 51774
Makes depth measurement of
large (up to 3" diameter) holes
0-6" Dial-Cal® .001 .100 Jet Con. Black 1.5" 599-579-5 51879
easy and accurate. 0-8" Dial-Cal® .001 .100 White 2.5" 599-579-8 86567
0-8" Dial-Cal® .001 .100 Jet Con. Black 2.5" 599-579-8-5 87177
Tool No. EDP No. 0-12" Dial-Cal® .001 .100 White 2.5" 599-579-12* 86566
599-579-25 44300
0-12" Dial-Cal® .001 .100 Jet Con. Black 2.5" 599-579-12-5* 87178
150mm Dial-Cal® .02mm 2mm Yellow 40mm 599-579-14 51775
Wood Case 599-578-9999 44297
*This model Dial-Cal does not feature anti-backlash mechanism.

Dura-Cal® IP65 Digital Electronic Caliper


• IP65 compliant — 100% liquid resistant • A large, 1/4” LC Display for easy
and able to protect against the readings.
penetration of dust • Auto Shut-off after 2 hours
• Range: 0-6”/0-150mm • Instant Inch/Metric conversion
• Resolution: .0005”/0.01mm • Power supply: 3V Lithium-Battery, type
• Specifications consistent with DIN 862 CR 2032 Description Tool No. EDP No.
• Battery life: approx. 1.5 years
Dura-Cal IP65 599-571-10S 27566
Digital Electronic Calipers with Titanium Jaws
Using a patented capa-µ-system computer chip for fast,
reliable and accurate measuring, Interapid digital calipers are
designed with titanium nitride (TiN) jaws for exceptional
durability. Produced with combination of non-ferrous alloy
and stainless steel, these tools are rugged and light-weight.

Description Tool No. EDP No.


0-6" Digital Caliper 05.90052 27590
0-8" Digital Caliper 05.90053 27589
0-12" Digital Caliper 05.90054 27588

Digital Electronic Depth Gage Calipers


Fast, accurate depth measurements are simple to make with depth gage calipers from Interapid.
Three different measuring depth feet are available for your specific application, and all feature the
patented capa-µ-system computer chip for fast, reliable and accurate measuring.
Measuring Bridge Tool EDP
Description Foot Length No. No. A
0-8" Depth Gage A 4" 05.90055 27575
0-12" Depth Gage A 4" 05.90058 27576
0-8" Depth Gage B 4" 05.90056 27577
0-12" Depth Gage B 4" 05.90059 27578
0-8" Depth Gage C 4" 05.90057 27579 B
0-12" Depth Gage C 4" 05.90060 27583
Optional Accessories
7" Removable Bridge 05.60087 27580 C
10.24" Removable Bridge 05.60088 27581
12.6" Removable Bridge 05.60089 27582

Call or Email to Receive our Best Deals Catalog!


Phone: 1-800-283-3600 • Fax: 1-401-886-2553
http://www.brownandsharpe.com Email: tesausa@us.bnsmc.com
0552-04 5/3/06 10:56 AM Page 1

558-06

BROWN & SHARPE MFG. CO.


Indicators and Measuring Stands
AGD 2 Indicators
Features:
• 0-100 reading. • Stainless steel racks & bottom bearings.
• Revolution counter & Tolerance pointers. • 2-1/4" with your choice of white or “Jet-console” black dial.
Dial Hand Tool EDP
Face Color Range Grad. Reading No. No.
White Black 1" .001 0-100 14.82022 26862
Black Orange 1" .001 0-100 14.82023 26863

BesTest Indicators
Features: • Easy to read, satin black,“Jet-Console” • Constant clockwise rotation.
face with high visibility orange hand. • Anti-magnetic & corrosion resistant.
• Universal Mounting • Automatic reversal.
Smallest Dial Point Tool EDP
Division Marking Dia. Range Length No. No.
.001" 0-15-0 1" .030" 1/2" 599-7029-5 51732
.0005" 0-15-0 1" .030" 1/2" 599-7030-5 51733
.0005" 0-15-0 1-1/2" .030" 1/2" 599-7031-5 51734
.0001" 0-4-0 1" .008" 1/2" 599-7032-5 51737
.00005" 0-4-0 1-1/2" .008" 1/2" 599-7033-5 51738
.0005" 0-10-0 1" .020" 1-7/16" 599-7034-5 51735
.0005" 0-10-0 1-1/2" .020" 1-7/16" 599-7035-5 51736

Permanent Magnetic Bases


Holds on its Sides, Bottom & Vee- Upright, Horizontal, Inverted on Flat or Round Surfaces
• Simple pushbutton “On/Off” controls magnetic power. • With Permanent Magnet Base. Dial Holding Rod 1/4”
• Three flat energized faces (two sides and bottom) hold diameter (7/32” at end) with 1/4” dia. clamp screw.
firmly to magnetically conductive surfaces in any position Upright 3/8” diameter, 7” high. Base 1-5/8” wide, 1-7/8”
- upright, horizontal or even upside-down. deep and 1-15/16” high.
• The V-surface holds to round surfaces. Tool EDP
• Design accommodates BesTest type Dial Test Description No. No.
Indicators and AGD Indicators Magnicator 599-7746 44908

Magnetic Base Indicator Holder


Attaches Firmly To Any Shape or Contour. Rugged construction with unlimited versatility. May be used with coolant
systems, lamps, and other suitable devices. With a 599-7052 Dovetail Attachment (included) the unit accommodates
AGD and BesTest Indicators for all your fixturing needs.
Features: • Main post - 468”.
• 70 steel segments conform simply and precisely to any • Permanent powerful magnet.
shape or contour.
• Cam-lock mechanism provides easy & accurate fine Tool EDP
adjustment of the steel segments. Description No. No.
• .391” cross rod with fine adjustment. Omnibase 599-7720 51945

Magnetic Base Indicator Sets


No. 7742-7 Features: Hold Securely on any Ferrous Surface
• Heavy-duty upright “Dog House” permanent magnet base holders used by
• Holding rod with fine adjustment machinists, toolmakers and inspectors for set-up and checking
• Powerful magnet base work in progress.
N0. 7744-7 Features:
• Single clamp universal swivel Tool EDP
• Powerful magnet base Description No. No.
Heavy Duty Ind. Holder 599-7742-7 44902
Magnetic Ind. Stand 599-7744-7 44906

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0582-03 5/3/06 10:57 AM Page 582

559-06

CLAMPING TOOLS
BAR CLAMPS These one-handed clamps feature a quick-release trigger. The pistol-grip handle adjusts and tightens with just one hand.
UPC MFG # JAW MASTER PACK SHELF PACK
m3 kg
ITEM 0 38548 OPENING QUANTITY ft3 lb QUANTITY
506 00506 5 6"/150 mm 5 0.017 4.037 1
0.585 8 lb 14 oz
512 00512 6 12"/300 mm 5 0.021 4.944 1
0.739 10 lb 14 oz
518 00518 8 18"/455 mm 5 0.027 5.67 1
0.938 12 lb 8 oz
524 00524 9 24"/605 mm 2 0.011 2.767 1
0.405 6 lb 1.6 oz
536 00536 2 36"/910 mm 2 0.015 3.311 1
0.541 7 lb 4.8 oz
550 05500 8 50"/1300 mm – 0.016 2.262 1
0.562 5 lb
MINI BAR CLAMPS
546 00546 1 6"/150 mm 5 0.008 1.953 1
0.294 4 lb 4.9 oz
5412 05412 4 12"/300 mm 5 0.012 2.435 1
0.436 5 lb 5.9 oz
MACRO BAR CLAMPS
53016 53016 1 10"/250 mm 2 0.009 2.665 1
0.330 5 lb 14 oz
53026 53026 0 20"/500 mm 2 0.014 3.26 1
0.490 5 lb 14 oz
53046 53046 8 33-1/2"/837 mm 2 0.020 4.224 1
0.715 9 lb 5 oz
WELDING CLAMPS
5906 05906 8 6"/150 mm 10 0.029 11.48 2
1.029 25 lb 5 oz
5918 05918 1 18"/455 mm 10 0.052 14.54 2
1.852 32 lb 1 oz
SPRING CLAMPS
58100 58100 2 1"/25 mm 50 0.050 5.463 10
1.766 12 lb 0.7 oz
58200 58200 9 2"/50 mm 50 0.050 7.448 10
1.766 16 lb 6.7 oz
58300 58300 6 3"/75 mm 25 0.050 6.314 5
1.766 13 lb 15 oz
PIPE CLAMP/SPREADER Works with threaded or unthreaded 3/4"/19 mm black pipe. Use as a clamp or a spreader.
590L3 00590 4 * 5 0.022 5.2 1
1.410 11 lb 8 oz
5902L3 59021 9 * 5 0.470 9.98 1
1.253 22 lb
HANDY CLAMP
570L3 57000 6 * 10 0.026 5.6 5
0.935 5 lb 12 oz
*Depends on the length of pipe used.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0584-03 5/3/06 10:58 AM Page 1

560-06

Ergonomic Screwdrivers
Slotted Screwdrivers
Ball Point Screwdrivers
for Hexagon Socket Head Screws
BE-8010 - BE-8040
BE-8150 - BE-8155
BE-8220 - BE-8240
BE-8703 - BE-8708 BE-8710 BE-8250 - BE-8255 BE-8160 - BE-8890
Package Tool Shaft Length Ctn.
Package Tip Tool Shaft Length Ctn.
Code Length x Tip Diam. Qty.
Code No. Length x Tip Diam. Qty.
BE-8010 6" 2" x 3/32" 10
BE-8703 3mm 8-1/4" 4-1/4" x 3mm 10
BE-8020 6" 2" x 1/8" 10
BE-8704 4mm 9" 4-1/4" x 4mm 10
BE-8030 7-3/4" 3" x 9/64" 10
BE-8705 5mm 9" 4-1/4" x 5mm 10
BE-8040 8-3/4" 4" x 5/32" 10
BE-8706 6mm 10-1/4" 5-1/2" x 6mm 10
BE-8150 8-3/4" 4" x 7/32" 10
BE-8708 8mm 10-1/2" 5-3/4" x 8mm 10
BE-8155 9-3/4" 5" x 1/4" 10
BE-8710* 10mm 14" 7-1/2" x 10mm 5
BE-8160* 9-3/4" 5" x 5/16" 10
BE-8220 9" 5" x 1/8" 10
BE-8230 9-3/4" 5" x 9/64" 10
BE-8240 11-3/4" 7" x 5/32" 10
Torx Screwdrivers BE-8250 10-3/4" 6" x 7/32" 10
BE-8255 10-3/4" 6" x 1/4" 10
BE-8260* 11-3/4" 7" x 5/16" 10
BE-8865* 13-1/2" 7" x 5/16" 5
BE-8940 BE-8906 - BE-8930 BE-8870* 13-1/2" 7" x 3/8" 5
BE-8880* 14-1/2" 8" x 1/2" 5
Package Tip Tool Shaft Length Ctn.
BE-8890* 14-1/2" 8" x 9/16" 5
Code No. Length x Tip Diam. Qty.
BE-8906 TX 6 6" 2" x 1.7mm 10
BE-8907 TX 7 6-1/4" 2-1/8" x 1.99mm 10
BE-8908 TX 8 6-1/2" 2-3/8" x 2.31mm 10 Pozidriv/Supadriv Screwdrivers
BE-8909 TX 9 7-1/4" 2-3/8" x 2.5mm 10
BE-8910 TX 10 7-1/4" 2-1/2" x 2.74mm 10
BE-8915 TX 15 7-1/2" 2-3/4" x 3.27mm 10
BE-8920 TX 20 7-1/2" 3" x 3.86mm 10
BE-8925 TX 25 8" 3-1/8" x 4.43mm 10
BE-8840 BE-8800 - BE-8820
BE-8927 TX 27 8-1/4" 3-1/2" x 4.99mm 10
BE-8930 TX 30 8-3/4" 4" x 5.52mm 10 Package Tip Tool Shaft Length Ctn.
Code No. Length x Tip Diam. Qty.
BE-8940* TX 40 11-1/2" 5-1/8" x 6.65mm 5
BE-8800 PZD/SDV 0 6-1/2" 2-1/3" x 1/8" 10
BE-8810 PZD/SDV 1 7-3/4" 3" x 3/16" 10
BE-8820 PZD/SDV 2 8-3/4" 4" x 1/4" 10
BE-8830* PZD/SDV 3 10-3/4" 6" x 5/16" 5
Phillips Head Screwdrivers BE-8840* PZD/SDV 4 14-1/2" 8" x 3/8" 5

Sets
Pkg. Code Ctn.
BE-8600 - BE-8620 BE-8640
Set No. Contents Qty.
Package Tip Tool Shaft Length Ctn. BE-8020, BE-8040, BE-8150, BE-8155 SLOT
BE-9881 10
Code No. Length x Tip Diam. Qty. BE-8610, BE-8620 PHILLIPS
BE-8600 PH 0 6-1/2" 2-1/3" x 1/8" 10 BE-8908, BE-8909, BE-8910, BE-8915,
BE-9885 10
BE-8610 PH 1 7-3/4" 3" x 3/16" 10 BE-8920, BE-8925 TORX
BE-8620 PH 2 8-3/4" 4" x -1/4" 10 BE-8030, BE-8150 SLOTTED
BE-8630* PH 3 10-3/4" 6" x 5/16" 5 BE-9886 BE-8810, BE-8820 PZD/SDV 10
BE-8640* PH 4 14-1/2" 8" x 3/8" 5 BE-8610, BE-8620 PHILLIPS

* Hexagonal collar for wrench-assisted turning

Vansteen Marine Supply


Phone: 713-674-3300 Over 25 Years of
888-300-7161 Reliable Deck
Fax: 713-674-3344
E-mail: sales@vansteen.com and Engine Supply
Internet: www.vansteen.com
0557-04 5/3/06 10:59 AM Page 1

561-06

ERGONOMIC SLIP-JOINT PLIERS

No. of
Type Ordering A B B C D E Adjust- Wt. Carton
Slip Joint Pliers: No. No. mm mm in. mm mm mm ment grams Qty.
• Rapid set jaws Positions
• Quick release with touch of a button 8224 8224 250 45 1.77 40 53 7.5 9 350 5
• Hardened steel teeth keep their grip 8225 8225 315 55 2.16 52 67 9 12 560 3

EUROPEAN ADJUSTABLE WRENCHES


80 Series
Precision-hardened and anti-corrosion treated.
Series P: Combination of pipe-grip facility, one side serrated,
may be used like a pipe wrench. Phosphated, single pack.
No. 31 No 31: With measuring scale and alligator jaw.

# per box A B C D Weight


Product EAN/Bar Code
Code 731415 + mm in. mm mm mm g
8069 0007028 5 110 4-1/4 13 4,0 9,0 60
8070 0007110 5 155 6 20 4,9 11,5 135
8071 0007202 5 205 8 27 6,0 13,0 255
8072 0007288 5 255 10 30 8,6 15,0 400
8072 P 0042524 5 255 10 33 8,6 15,5 400
8073 0007363 5 305 12 34 11,9 18,0 665
8073 P 0101610 5 305 12 34 11,9 18,0 680
8074 0007448 1 380 15 44 14,0 20,0 1035
8075 0007523 1 455 18 53 17,7 22,5 1665
With measuring scale and alligator jaw
31 0004942 5 205 8 32 5,5 13,5 270

UNIVERSAL PIPE WRENCHES

140-147 Series
Black oxidized and anti-rust treated high-alloyed special steel
with precision induction-hardened jaws. Sheet outer handle.
Inner handle with safety stop for regulation nut.
# per box A B C D Weight
Product EAN/Bar Code
Code 731415 + mm mm in. mm mm g
140 0008797 3 215 30 1.20 13 15 400
141 0008827 3 280 36 1.40 16 18 700
142 0008841 3 370 52 2.05 20 20 1300
143 0008872 1 555 78 3.10 29 26 2700
144 0008902 1 720 110 4.35 32 33 5380
147 0008933 1 1060 160 6.30 38 35 7210

28 Paul Dr., San Rafael, CA 94903


Phone: 415-492-9202
Bahco Metric Marine & Industrial
Fax: 415-492-9206
LARGE SELECTION OF METRIC TOOLS
EUROPEAN SPECIALTIES E-mail: info@metricmarine.com
PRECISION MEASURING & CUTTING TOOLS Web: www.metricmarine.com
Your Source for European Specialty Tools, Tubing & Fittings
0558-04 5/3/06 11:00 AM Page 1

562-06

C. S. OSBORNE & CO.


PALMS REPAIR KIT AUTOMATIC AWL
SAIL SEWING

No. 265 No. 266 No. 413


Rawhide palm with iron thimble hide bound. For sewing leather, canvas and similar
Riveted joints. Made in both right and left materials. The awl carries a reel of black thread
hand. Right hand will be furnished unless on the handle. Hollow handle holds extra
otherwise specified. curved needle and wrench. Directions
furnished with each awl explaining how
No. K-1 automatic lock stitch can be effective in repair
SELF-CENTERING PUNCH SETS work. Comes with one straight and one curved
No. Ga. Description
diamond pointed needle.
501 2 17 2" curved upholstery needle
501 3 16 3" curved upholstery needle
508 3 14 3" bent pack needle
509 21⁄4 17 2 1⁄4" sailmakers’ canvas needle SAILMAKERS’ NEEDLES
515 21⁄2 17 Carpet/very heavy material needle

No. 509
No. K-156 ARCH PUNCH Size Size Size
Inches Inches Inches
Each kit contains threaded handle with self- (ga.) (ga.) (ga.)
centering pointed plunger. This handle will 8 4 1⁄2 12 3 1⁄4 15 2 1⁄2
accommodate the interchangeable threaded 9 4 13 3 16 2 3⁄8
cutting tubes. The punches in these sets will 10 3 3⁄4 14 2 3⁄4 17 2 1⁄4
cleanly cut leather, rubber, paper, plastics and
other soft materials. 11 3 1⁄2
No. 149
No. K-156 — 9 Tubes 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 5⁄8", 3⁄4", 7⁄8", 1" Diameter Diameter Diameter Diameter Diameter
No. K-159 — 4 Tubes 11⁄8", 11⁄4", 13⁄8", 11⁄2" (inches) (inches) (inches) (inches) (inches)
3
⁄16 1 113⁄16 2 5⁄8 3 7⁄16
1
⁄4 11⁄16 17⁄8 2 11⁄16 3 1⁄2 ARCH PUNCH SETS
ARCH PUNCH AND TOOL SET 5
⁄16 1 ⁄8
1
1 ⁄16
15
2 ⁄4
3
3 9⁄16
3
⁄8 1 ⁄16
3
2 2 ⁄16
13
3 5⁄8
7
⁄16 11⁄4 2 1⁄16 2 7⁄8 3 11⁄16
1
⁄2 15⁄16 2 1⁄8 2 15⁄16 3 3⁄4
9
⁄16 1 ⁄8
3
2 ⁄16
3
3 3 13⁄16
5
⁄8 1 ⁄16
7
2 ⁄4
1
3 ⁄16
1
3 7⁄8
11
⁄16 11⁄2 2 5⁄16 3 1⁄8 3 15⁄16
3
⁄4 19⁄16 2 3⁄8 3 3⁄16 4 No. K-14
13
⁄16 1 ⁄8
5
2 ⁄16
7
3 1⁄4 1 each of following sizes No. 149 - Arch Punch:
7
⁄8 111⁄16 2 1⁄2 3 5⁄16 Sizes
(inches)
1
⁄ 4 3⁄ 8 1⁄ 2 5⁄ 8 3⁄ 4 7⁄ 8 1
15
⁄16 13⁄4 2 9⁄16 3 3⁄8

Diameter Diameter Diameter Diameter Diameter


(mm) (mm) (mm) (mm) (mm)
4 14 24 34 44
No. K-17 5 15 25 35 45
Our No. Description 6 16 26 36 46
1 each 149 1⁄4 Arch Punch 7 17 27 37 47
of the 149 3⁄8 Arch Punch 8 18 28 38 48
following 149 1⁄2 Arch Punch 9 19 29 39 49
items: 149 5⁄8 Arch Punch 10 20 30 40 50 No. K-16
149 3⁄4 Arch Punch 11 21 31 41 51 1 each of following sizes No. 149 - Arch Punch:
4-1 Scratch Awl 12 22 32 42 52 Sizes
V-13 7" Snip 13 23 33 43
3
⁄ 16 5 ⁄ 16 7 ⁄ 16 9 ⁄ 16 11 ⁄ 16 13 ⁄ 16 15 ⁄ 16
(inches)

QUALITY ★ SINCE 1826


Visit our home page: TEL: 973-483-3232
www.csosborne.com C. S. OSBORNE & CO. FAX: 973-484-3621
125-MA JERSEY STREET
HARRISON, NJ 07029 - U.S.A.
e-mail: cso@csosborne.com
0559-04 5/3/06 11:00 AM Page 1

563-06

C. S. OSBORNE & CO.


BRASS PLAIN RIM GROMMETS GROMMET HOLE CUTTER GROMMET INSERTING DIE
AND WASHERS

No. 500
Drop forged, tempered and polished edge. No. 216 — Plain Rim
Inside tapered for easy clearance. Use with Sets plain rim washers and grommets. Sizes 00
No. G1 corresponding grommets and setting dies. through 5 drop forged, size 6 malleable casting.
For best results in setting our grommets and Made to U.S. Government Specifications. Drop
Hole Hole Wt. each Hole Hole Wt. each forged, properly machined and hardened. Must
washers, use our No. 500 grommet hole cutter size (oz) cutter size (oz)
cutter punch and our No. 216 setting die with be used with our grommets and washers.
00 3
⁄16 2 4 1
⁄2 6
corresponding sizes. Size Weight each Size Weight each
0 1
⁄4 2 5 5
⁄8 9
Size Diameter of hole Weight per gross No. (lbs) (oz) No. (lbs) (oz)
1 9
⁄32 3 6 3
⁄4 9
No. when set (inches) (lbs) (oz) 00 1 6 3 1 9
2 3
⁄8 3 7 7
⁄8 12
00 3
⁄ 16 — 2 0 1 6 4 2 8
3 7
⁄16 6 8 1 13
0 1
⁄4 — 5 1 1 7 5 2 10
1 9
⁄ 32 — 8 2 1 7 6 3 15
2 3
⁄8 — 12 Note: Grommet setting die for spur grommets
3 7
⁄ 16 1 2 GROMMET KIT ( No. 217) also available.
4 1
⁄2 1 8
5 5
⁄8 1 12
6 13
⁄ 16 6 —
Note: Nickel-plated brass plain rim grommets RAWHIDE HAMMER
and washers also available. with split head
Rolled-rim grommets and spur washers
also available in brass or nickel plated.
Specify if either is desired.

GASKET AND No. K-235


WASHER CUTTER Each kit consists of a No. 235 grommet die, a No. 395
No. 245 cutting punch, three dozen brass For use with arch punches, grommet dies and
plain rim grommets and washers, a small wherever a cushioned blow is desired. To re-
cutting board and complete instructions. place faces, just loosen the safety nut, remove
the worn face, insert replacement, and tighten.
Kit Diameter of grommet Weight per kit
size (inches) (lbs) Size Weight Length of head Diameter of
0 1
⁄4 11⁄4 No. (lbs) (oz) (inches) face (inches)
No. 50
1 9
⁄32 11⁄2 1 1 9 35⁄8 11⁄4
Designed for cutting gaskets and washers any 2 3
⁄8 13⁄4 2 2 — 41⁄4 11⁄2
size up to and including 24 inches outside 3 7
⁄16 13⁄4 3 2 15 47⁄8 13⁄4
diameter. Can be used with bit brace, drill
press, or by hand. Replacement blades avail-
able. Highly polished.
REVOLVING PUNCH
MALLET
GASKET SCRAPERS

No. 197
No. 201G-B No. 155 Rubber mallets can be used without fear of
A quality scraper with brass riveted hardwood Frame is made of forged steel, highly polished. marring metal parts. Limited bounce. Head of
handles. Made from high carbon steel, then Cutting tubes are hand turned from carbon tool solid dense black rubber with white hickory
forged, hardened and tempered, edged and steel and threaded to allow easy replacement. handle.
sharpened. These tubes are individually tempered. Size Length Diameter Weight each
No. (inches) (inches) (oz)
Product Blade Length of blade Width of blade Size 1 2 3 4 5 6
No. type (inches) (inches) 2 3 1⁄4 2 1⁄8 13
Diameter
201G-B Bent 4 11⁄4 ⁄32
3 7
⁄64 ⁄8
1
⁄32
5
⁄64
11 3
⁄16 3 4 1⁄2 3 30
size

QUALITY ★ SINCE 1826


Visit our home page: TEL: 973-483-3232
www.csosborne.com C. S. OSBORNE & CO. FAX: 973-484-3621
125-MA JERSEY STREET
HARRISON, NJ 07029 - U.S.A.
e-mail: cso@csosborne.com
0560-04 5/3/06 11:01 AM Page 1

564-06

C. S. OSBORNE & CO.


RIGID PACKING SCREWS RIGID PACKING TOOL SET FLEXIBLE PACKING HOOKS

No. MT10
Length Diameter Length Diameter
(inches) (inches) (inches) (inches) No. 1204
6 3
⁄16 14 1
⁄4
These hooks are strongly made of toughest
8 3
⁄16 18 5
⁄16 materials. Two spiral steel shafts, one inside
No. 33P
10 1
⁄4 20 5
⁄16 the other, wound in opposite directions, make
12 1
⁄4 Product Length Packing of the shank. Handle is solid zinc. Hook is
No. Description (inches) (inches) tempered and permanently pointed.
MT33-S Rigid Packing Tool 9 1
⁄8
MT33-M Rigid Packing Tool 10 3
⁄16 Size Length Diameter of Diameter of Length of spiral
No. (inches) shaft (inches) spiral (inches) (inches)
MT33-L Rigid Packing Tool 10 5
⁄16
DOUBLE-END PACKING TOOLS 0 7 3
⁄32 11
⁄64 5
⁄16
Light “O” Ring
MT27 6 1
⁄8 1 61⁄4 3
⁄16 1
⁄4 3
⁄4
Packing Pick
2 10 5⁄8 1
⁄4 5
⁄16 11⁄8
No. MT12 3 15 3
⁄8 3
⁄8 11⁄2
3-22 22 3
⁄8 3
⁄8 11⁄2
Length Diameter Length Diameter RIGID PACKING TOOL SET
(inches) (inches) (inches) (inches) 3-30 30 3
⁄8 3
⁄8 11⁄2
4 18 3
⁄8 1
⁄2 17⁄8
6 1
⁄4 10 1
⁄4
5 22 3
⁄8 5
⁄8 17⁄8
8 1
⁄4 12 5
⁄16

LIGHT “O” RING PACKING PICK


FLEXIBLE PACKING HOOKS SETS
No. 904P
No. 1203
No. MT27 Product
No. Description Complete set consisting of 1 each of following
Length (inches) Diameter (inches) sizes No. 1204 Flexible Packing Hook
MT10-6 6" Rigid Packing Screw
6 1
⁄8 Sizes No. 1 2 3
MT10-10 10" Rigid Packing Screw
MT12-12 Double-End Packing Tool No. 1207
MT10-14 14" Rigid Packing Screw
Complete set consisting of 1 each of following
PACKING HOOKS sizes No. 1204 Flexible Packing Hook
Sizes No. 0 1 2 3 3-2 3-3 4 5
RIGID PACKING TOOL SET
NO. MT32
Length Diameter Length Diameter
(inches) (inches) (inches) (inches)
6 3
⁄16 12 1
⁄4 WING DIVIDERS
8 3
⁄16 14 1
⁄4
10 1
⁄4
Also available, following packing hook with straight point:
8 3
⁄16

No. 908P
No. 106
Product Description
DRAG HOOK No. The nuts on the wings are steel. Washers are
MT10-6 6" Rigid Packing Screw of turned brass. The points are carefully hard-
MT32-8 8" Packing Hook ened and every care is taken with the thread
of the screws which hold the legs in position
No. 671 MT10-10 10" Rigid Packing Screw on the wings. The springs are carefully
Flattened tang on top of hook for finger MT12-12 Double-End Packing Tool tempered and are made for easy adjustment
comfort. Hook anchored for direct pull. MT10-14 14" Rigid Packing Screw while holdthe legs firmly. Made to U.S.
MT42-14 Packing Iron Government Specifications.
Overall length Diameter stock Handle
(inches) (inches) (inches) MT10-18 18" Rigid Packing Screw
24 3
⁄8 5×1 MT10-20 20" Rigid Packing Screw Size (inches) 6 8 10 12

QUALITY ★ SINCE 1826


Visit our home page: TEL: 973-483-3232
www.csosborne.com C. S. OSBORNE & CO. FAX: 973-484-3621
125-MA JERSEY STREET
HARRISON, NJ 07029 - U.S.A.
e-mail: cso@csosborne.com
0561-04 5/3/06 11:02 AM Page 1

565-06

C. S. OSBORNE & CO.


CAULKING IRON MARLIN SPIKE THREE-CORNERED
BEARING SCRAPER

No. 276
Made of high-grade carbon steel carefully No. 242
forged, hardened and tempered. Fully polished.
No. 273 Made of high-grade tool steel properly
Length hardened and highly polished. This is an
Cast malleable iron. Polished blade. 6 8 10 12 14 16 18 20 24
(inches) excellent tool for scraping small surfaces
Size Length Width Thickness Weight each where a large tool cannot be used.
No. (inches) (inches) (inches) (oz)
00 5 2 1
⁄32 4
COLD CHISELS
0 5 5⁄8 2 1⁄2 1
⁄16 41⁄2 THREE-SQUARE
1 5 7⁄8 2 1⁄4 1
⁄8 5 3⁄4 BEARING SCRAPER

No. 325
SPECIAL CURVED
BEARING SCRAPER SET A hammer-forged tool. Forged of alloy steel. No. 34B, 34C, 34D, 34E
Blades are induction hardened and carefully Made of high-grade tool steel. Blade is hollow
tempered, then polished. Black industrial finish. ground and carefully polished.
Width of cut Hex stock size Length Product Length Weight UPC
(inches) (inches) (inches) Description
No. (inches) ea. oz. No.
1
⁄4 1
⁄4 5 34B-12 3 Sq. Scraper 12 6 59172
5
⁄16 5
⁄16 5 34C-10 3 Sq. Scraper 10 6 59173
No. 1140 3
⁄8 3
⁄8 5 34D-8 3 Sq. Scraper 8 5 59174
Absolutely non-chattering. Manufactured from 7
⁄16 3
⁄8 51⁄2
the highest grade tool steel. Each scraper is 34E-6 3 Sq. Scraper 6 4 59070
deeply grooved, hollow-ground and carefully
1
⁄2 3
⁄8 6
tempered. Hardwood handle. Polished blade. 5
⁄8 1
⁄2 6
3
⁄4 5
⁄8 7
Product Cutting edge Blade length
No. (inches) (inches) 7
⁄8 3
⁄4 8 SCRATCH AWLS
1411 3 10 1⁄2 1 7
⁄8 8
1412 3 ⁄2
1
11 11⁄8 7
⁄8 81⁄2
1413 4 12 1⁄8
Also available (separate from set)
1409-2 2 9 3⁄4 POURING LADLES

BEARING SCRAPERS SET No. 4


Made in four sizes for your convenience.
Best quality polished steel blades with rugged
amber translucent plastic handles.
No. 373
Iron, lead, aluminum, even bronze and beryllium pour evenly from a forged steel bowl. Residue
that clogs a cast-iron bowl is easily tapped out of our heating-retaining steel ladle. Our pouring
ladles are made with forged steel bowls. Steel handles are blacksmith welded to the bowls.
No. MT2 Double-lipped bowls. Heavy quality for long use. Made in the following sizes.
Scrapers for bearings, valves, babbitt metal,
Diameter of bowl Depth of bowl Thickness Handle length Handle size Capacity liquid Capacity lead
journals, etc. They vary in size from 6 to 14 (inches) (inches) (gauge) (inches) (inches) (lbs)
inches. Set of six special hollow-ground
scrapers comes with a canvas pouch. Can 2 1⁄2 13⁄16 12 111⁄2 3
⁄16 x 1⁄2 ⁄2
1
gill 11⁄4
also be purchased separately. Made to meet 3 13⁄8 12 111⁄2 3
⁄16 x 1⁄2 ⁄3
2
gill 21⁄4
U.S. Government Specifications. 31⁄2 11⁄2 12 16 3
⁄16 x 5⁄8 1 gill 3
Product 4 19⁄16 10 16 3
⁄16 x 5⁄8 13⁄4 gill 41⁄4
Description
No. 5 2 3⁄16 10 20 1⁄2 1
⁄4 x 1 31⁄4 gill 10 1⁄4
37A-14 Half-Round Scraper 6 21⁄2 10 20 1⁄2 1
⁄4 x 1 11⁄4 pint 141⁄4
37B-12 Half-Round Scraper 6 (extra heavy) 21⁄2 3
⁄16 24 1
⁄4 x 1 11⁄4 pint 141⁄4
37C-10 Half-Round Scraper 7 23⁄4 3
⁄16 29 3
⁄8 x 11⁄4 11⁄2 pint 21
37D-8 Half-Round Scraper 8 31⁄8 3
⁄16 29 1⁄2 3
⁄8 x 11⁄4 2 1⁄2 pint 27 1⁄2
34E-6 3-Square Scraper 9 31⁄2 1
⁄4 36 3
⁄8 x 11⁄4 31⁄2 pint 40
36B-12 Double-End Scraper 10 4 1
⁄4 37 3
⁄8 x 11⁄2 5 pint 50

QUALITY ★ SINCE 1826


Visit our home page: TEL: 973-483-3232
www.csosborne.com C. S. OSBORNE & CO. FAX: 973-484-3621
125-MA JERSEY STREET
HARRISON, NJ 07029 - U.S.A.
e-mail: cso@csosborne.com
0562-04 5/3/06 11:04 AM Page 1

566-06

C. S. OSBORNE / PARMELEE DIVISION

PIPE WRENCH FOR USE IN TIGHT PLACES OR ON HIGHLY POLISHED PIPE


This pipe wrench is designed for use on highly polished or any kind of pipe and for working in
close quarters. The ratchet action gives a new grip with each pull of the handle. The wrench has
no teeth — consequently it cannot bite into the pipe. Its grip is sure and certain, for its girth
completely surrounds the pipe it grips, just as the thumb and fingers of a person’s hand would
surround it if they were gripping the pipe. Wherever cylindrical tubes or rods have to be made up
by threading, this pipe wrench is recommended. All sizes are furnished with lock nuts which
operate from girth end. The handle, girth and lock bolt on all sizes, except No. 4, are cast of high-
carbon alloy steel. All sizes are toughened and hardened by scientific heat treatment.
ORDERING INFORMATION
Girths and handles are sold separately, except in case of I.P.S. sets (see last table). A separate
girth is necessary for each diameter of pipe, tubing, or rod and cannot be used on diameters
other than that for which it was made. Always specify whether the O.D. or I.P.S. of pipe, tubing,
or rod is desired. Special sizes can be furnished, including metric sizes from 19mm to 152.4mm.
To order, specify exact girth desired.
Available parts for #3 Wrench
Product O.D. I.P.S. Girth width Our O.D. I.P.S. Girth width
No. (inches) (inches) (inches) Description No. (inches) (inches) (inches) Description
H3 — — — 20" Handle G3 3 ⁄81
3 ⁄8
1
— Girth
Available parts for #1 Wrench G3 2 3⁄16 2 3⁄16 — Girth + liner G3 3 3⁄16 3 3⁄16 — Girth
Product O.D. I.P.S. Girth width Our O.D. I.P.S. Girth width G3 21⁄4 2 ⁄4
1
— Girth G3 3 ⁄41
3 ⁄4
1
— Girth
No. (inches) (inches) (inches) Description No. (inches) (inches) (inches) Description
G3 2 9⁄32 2 9⁄32 — Girth G3 3 5⁄16 3 5⁄16 — Girth
H1 — — — 10" Handle G1 13⁄8 1 ⁄8
3
— Girth
G3 2 5⁄16 2 5⁄16 — Girth G3 3 3⁄8 3 3⁄8 — Girth
G1 7⁄8 7
⁄8 — Girth G1 113⁄32 113⁄32 — Girth
G3 2 3⁄8 2 3⁄8 — Girth G3 3 1⁄2 3 1⁄2 — 3 1⁄8 Girth
G1 15⁄16 15
⁄16 — Girth G1 17⁄16 17⁄16 — Girth
2 G3 21⁄2 21⁄2 — Girth G3 3 5⁄8 3 5⁄8 — Girth
G1 1 1 — Girth G1 1⁄2 IPS — 1
⁄2 Girth
G3 2 9⁄16 2 9⁄16 — Girth G3 3 11
⁄ 16 3 11
⁄16 — Girth
G1 11⁄16 11⁄16 — Girth G1 3⁄4 IPS — 3
⁄4 Girth 3 1
⁄ 8
G3 2 5⁄8 2 5⁄8 — Girth G3 2 IPS — 2 Girth
G1 11⁄8 11⁄8 — 2 Girth G1 1 IPS — 1 Girth
G3 2 21⁄32 2 21⁄32 — Girth G3 2 1⁄2 IPS — 2 1⁄2 Girth
G1 13⁄16 13⁄16 — Girth L1 — — — Lock bolt
G3 2 11⁄16 2 11⁄16 — Girth G3 3 IPS — 3 Girth
G1 17⁄32 17⁄32 — Girth N1 — — — Adjusting nut
G3 2 3⁄4 2 3⁄4 — Girth L3 — — — Lock bolt
G1 11⁄4 11⁄4 — Girth P1 — — — Slip pin
G3 2 7⁄8 2 7⁄8 — Girth N3 — — — Adjusting nut
G1 15⁄16 15⁄16 — Girth
G3 3 3 — Girth P3 — — — Slip pin
G3 3 1⁄16 3 1⁄16 — Girth

Available parts for #2 Wrench


Product O.D. I.P.S. Girth width Our O.D. I.P.S. Girth width Description Available parts for #4 Wrench
Description
No. (inches) (inches) (inches) No. (inches) (inches) (inches) Product O.D. I.P.S. Girth width Description Our O.D. I.P.S. Girth width Description
H2 — — — 20" Handle G2 2 1⁄8 2 1⁄8 — Girth No. (inches) (inches) (inches) No. (inches) (inches) (inches)
G2 1 1 — Girth + liner G2 2 5⁄32 2 5⁄32 — Girth H4 — — — 37" Handle G4 5 9⁄16 5 9⁄16 — Girth
G2 11⁄16 11⁄16 — Girth + liner G2 2 3⁄16 2 3⁄16 — Girth G4 3 1⁄4 3 1⁄4 — Girth G4 5 5⁄8 5 5⁄8 — Girth
G2 11⁄8 11⁄8 — Girth + liner G2 2 7⁄32 2 7⁄32 — Girth G4 3 7⁄16 3 7⁄16 — Girth G4 6 6 — Girth
G2 13⁄16 13⁄16 — Girth G2 2 1⁄4 2 1⁄4 — Girth G4 3 1⁄2 3 1⁄2 — Girth G4 6 7⁄16 6 7⁄16 — Girth
G2 17⁄32 17⁄32 — Girth G2 2 9⁄32 2 9⁄32 — Girth G4 3 5⁄8 3 5⁄8 — Girth G4 6 5⁄8 6 5⁄8 — Girth
G2 11⁄4 11⁄4 — Girth G2 2 5⁄16 2 5⁄16 — Girth G4 3 3⁄4 3 3⁄4 — Girth G4 8 8 — Girth
3 5⁄8
G2 19⁄32 19⁄32 — Girth G2 2 3⁄8 2 3⁄8 — Girth G4 3 7⁄8 3 7⁄8 — Girth G4 9 9 — Girth
G2 111⁄32 111⁄32 — Girth G2 2 7⁄16 2 7⁄16 — Girth G4 4 4 — Girth G4 3 IPS — 3 Girth
G2 13⁄8 13⁄8 — Girth G2 21⁄2 21⁄2 — Girth G4 4 1⁄8 4 ⁄8
1
— 3 ⁄8
5
Girth G4 3 ⁄2 IPS
1
— 3 ⁄2
1
Girth
31
⁄ 8
G2 17⁄16 17⁄16 — Girth G2 2 9⁄16 2 9⁄16 — Girth G4 4 1⁄4 4 1⁄4 — Girth G4 4 IPS — 4 Girth
G2 11⁄2 11⁄2 — Girth G2 25⁄8 25⁄8 — Girth G4 4 1⁄2 4 1⁄2 — Girth G4 5 IPS — 5 Girth
G2 19⁄16 1 ⁄16
9
— 3 1⁄8 Girth G2 2 ⁄16
11
2 ⁄16
11
— Girth G4 4 3⁄8 4 3⁄8 — Girth G4 6 IPS — 6 Girth
G2 15⁄8 15⁄8 — Girth G2 2 3⁄4 2 3⁄4 — Girth G4 4 7⁄16 4 ⁄16
7
— Girth L4 — — — Lock bolt
G2 121⁄32 121⁄32 — Girth G2 2 13⁄16 2 13⁄16 — Girth G4 4 5⁄8 4 5⁄8 — Girth N4 — — — Adjusting nut
G2 111⁄16 111⁄16 — Girth G2 2 7⁄8 2 7⁄8 — Girth G4 4 3⁄4 4 3⁄4 — Girth P4 — — — Slip pin
G2 13⁄4 13⁄4 — Girth G2 1 IPS — 1 Girth G4 5 3⁄8 5 3⁄8 — Girth
G2 125⁄32 125⁄32 — Girth G2 11⁄4 IPS — 11⁄4 Girth
G2 113⁄16 113⁄16 — Girth G2 11⁄2 IPS — 11⁄2 Girth
G2 17⁄8 17⁄8 — Girth G2 2 IPS — 2 Girth Iron pipe size wrench sets
G2 129⁄32 129⁄32 — Girth L2 — — — Lock bolt Product Handle size I.P.S. girth sizes Girth width Weight
G2 115⁄16 115⁄16 — Girth N2 — — — Adjusting nut No. No. (inches) (inches) (lbs) (oz)
G2 2 2 — Girth P2 — — — Slip pin C1 #1 1
⁄2 3⁄4 1 2 4 0
G2 21⁄16 21⁄16 — Girth C2 #2 1 11⁄4 11⁄2 2 3 1⁄8 16 8
C3 #3 2 2 1⁄2 3 3 1⁄8 19 10
C4 #4 3 4 3 5⁄8 35 8

QUALITY ★ SINCE 1826


Visit our home page: TEL: 973-483-3232
www.csosborne.com C. S. OSBORNE & CO. FAX: 973-484-3621
125-MA JERSEY STREET
HARRISON, NJ 07029 - U.S.A.
e-mail: cso@csosborne.com
0563-04 5/3/06 4:05 PM Page 591

567-06

MILWAUKEE TOOL & EQUIPMENT CO.

MACHINIST VISES HINGED PIPE VISES


These vises hold pipe and round bar stock for cutting,
Meets all Federal Specifications:
GGG-V-410 Type VI.
drilling, and threading operations. Minimum capacity ". ⅛
Reversible for left or right opening. Field-replaceable
jaws are hardened steel; yoke and base are
STATIONARY malleable iron. Meet all Federal Specifications:
GGG-V-415a
BASE Type I, Class II. ITEM
PIPE
WEIGHT
CAPACITY
NO.
in. mm lb. kg
2M 2 50 8 3.5
Constructed of high tensile grey iron machined 4M 2½ 63 11 5
to close tolerances for true clamping at any 6M 3½ 89 18 8
opening. Replaceable hardened steel face 8M 4½ 114 27 12
jaws, steel screw and malleable iron nut.
JAW MAXIMUM THROAT
ITEM WEIGHT
NO.
WIDTH OPENING DEPTH ALUMINUM HEAVY DUTY
in. mm in. mm in. mm lb. kg
30 3 76 4 101 2 ½
63 27 12 PIPE WRENCHES
35 3 ½ 89 5 127 2 ¾
69 35 15
40 4 101 6 152 3 ¼
82 50 22 High quality aluminum handle cuts bulk
45 4 ½ 114 7 177 3 ½
89 60 27 weight almost in half. Moveable hook PRODUCT ITEM LENGTH PIPE SIZE WEIGHT

½
NO. NO.
50 5 127 8 203 3 89 79 35 jaws are chrome-vanadium steel heat in. mm in. mm lb. kg
60 6 152 10 254 4 101 125 56 treated to 40 R.C. with the teeth area 0321400 AR 14 14 355 2 50 2 1
80 8 203 12 304 5 ½
139 187 84 heat treated to 52 R.C. Removable heel 0321800 AR 18 18 457 2½ 63 3½ 1.5
jaw is manganese steel heat treated to 0322400 AR 24 24 609 3 76 5½ 2.5
52 R.C. Painted grey. Meets all Federal 0323600 AR 36 36 914 5 127 10 4.5
Specifications: GGG-W-651D Type II, 0324800 AR 48 48 1219 6 152 17 8
Class C.
SWIVEL
BASE STRAP WRENCHES
Replaceable polyurethane-coated straps
prevent slipping. Wrenches are designed
for use on stainless steel and PVC piping,
Low profile 360º swivel base locks at any angle. and soft pipe materials.
Replaceable face jaws are hardened steel. Meet all Federal Specifications: GGG-V-651d Type 5.
JAW MAXIMUM THROAT
ITEM WEIGHT PRODUCT HANDLE STRAP SIZE PIPE SIZE WEIGHT
WIDTH OPENING DEPTH LENGTH WxL
NO. NUMBER
in. mm in. mm in. mm lb. kg in. mm in. mm in. mm lb. kg
130 3 76 4 101 2 ½
63 34 15 1301200 12 304 1⅛ x 18 28 x 457 2 50 2 1
135 ½
3 89 5 127 2 ¾
69 42 18 1301800 18 457 1½ x 30 38 x 762 5 127 4¾ 2
140 4 101 6 152 3 ¼
82 58 26 1301900 18 457 1½ x 36 38 x 914 6 152 5 2.25
145 ½
4 114 7 177 3 ½
89 68 31
150 5 127 8 203 3 ½
89 91 41
160 6 152 10 254 4 101 145 65 SCREW JACKS
180 8 203 12 304 5 ½
139 210 95
ITEM
SCREW OPEN CLOSED
CAPACITY WEIGHT
SIZE HEIGHT HEIGHT
NO.
in. mm in. mm in. mm tons kg lb. kg
CAN CRUSHER LJ-0 1 x 6 25 x 152 13 330 8½ 215 6 5450 6 2
For recyclable aluminum and steel beverage cans. LJ-1 ¼
1 x 4 31 x 101 9 228 6¾ 171 10 9080 8 3
Welded steel construction; attaches to a flat, solid LJ-2 ¼
1 x 6 31 x 152 13 330 8¾ 222 10 9080 10 4
surface with ⅜" x 2" lag screws; 19" overall height; LJ-3 ¼
1 x 8 31 x 203 17 431 10¾ 273 10 9080 11 5
7 lbs. shipping weight. LJ-4 ¼
1 x 10 31 x 254 21 533 12¾ 322 10 9080 13 6
LJ-5 ½
1 x 6 38 x 152 12 ¾323 9 228 12 10896 11 5
LJ-6 ½
1 x 8 38 x 203 17 431 11¼ 285 12 10896 14 6

COMBINATION LJ-7 ½
1 x 10 38 x 254 21 533 13½ 342 12 10896 17 7
LJ-8 ½
1 x 12 38 x 304 25 635 15¼ 387 12 10896 19 8
PIPE VISES LJ-12 2 x 6 50 x 152 12 ½317 9½ 241 20 18160 18 8
(Swivel Base) Meets all Federal Specifications: LJ-13 2 x 8 50 x 230 16 ¾425 11¾ 298 20 18160 22 10
GGG-V-410 Type VI. LJ-14 2 x 10 50 x 254 21 533 14 355 20 18160 26 11
LJ-15 2 x 12 50 x 304 24 ½621 15½ 393 20 18160 30 13
JAW MAXIMUM THROAT PIPE LJ-16 2 x 14 50 x 355 28 ½723 17½ 443 20 18160 35 15
ITEM
WIDTH OPENING DEPTH CAPACITY
WEIGHT
LJ-17 ½
2 x 6 63 x 152 13 330 10½ 266 24 21792 27 12
½ ¾
NO.
in. mm in. mm in. mm in. mm lb. kg LJ-18 2 x 8 63 x 230 16 406 11 298 24 21792 31 14
87 ½
3 89 5 ½ 139 4 101 2 ½
63 46 20 LJ-19 ½
2 x 10 63 x 254 20 508 13¾ 349 24 21792 35 15
88 ½
4 114 6 ½ 165 5 127 3 ½
89 67 30 LJ-20 ½
2 x 12 63 x 304 24 609 15¾ 400 24 21792 40 18
288 5 127 7 177 6 152 4 ½
114 101 45 LJ-21 ½
2 x 14 63 x 355 27 ¾704 17½ 443 24 21792 43 19
289 6 152 10 254 8 203 6 152 170 77 LJ-23 ½
2 x 18 63 x 457 36 ¾933 22½ 570 24 21792 56 25

MILWAUKEE Tool & Equipment Company


2773 S. 29th St., Milwaukee, WI 53215 • Tel: 414-645-0200 / 800-645-8473 • Fax: 414-645-2892 • www.milwtool.com
0576-04 5/12/06 1:57 AM Page 1

568-06

NITTO KOHKI USA, INC.


PORTABLE DOUBLE ACTING HYDRAULIC PUNCHES
Specifications
Models HS06-1322 HS07-1624 HS11-1624
Max. Throat Depth inch 2-23/64 2-3/4 4-21/64
Max. Punching SS400 33/64 5/8 5/8
Thickness Double-Acting Hydraulic Pump HPD-05
Punching inch SUS304 1/4 1/4 1/4
Capacity Max. Punching Specifications
SS400
Diameter 55/64 15/16 15/16 Allowable Max. Pressure psi 10,000
inch SUS304
At No Load 50Hz 73.22
HS06 Punching Time 7.9 sec. Returning Time 3.4 sec.
Hole Making Time In3/min 60Hz 87.87
HS06-1322 HS07 / HS11 Punching Time 11.8 sec. Returning Time 5.7 sec.
Output At 10000psi 50Hz 33.56
Allowable Max. Pressure psi 10,000
In3/min 60Hz 40.28
Max. Output lbs 82,560 104,380 104,380
Motor 0.4kW 4P
Ram Stroke inch 53/64 63/64 63/64
Power Source AC115V / 230V Single Phase
Mass (Weight) lbs 45.2 56.2 66.0
Reservoir Capacity in3 244
Punching Time: Calculated value on max. capacity at 60Hz. Discharge Port Rc 3/8
The following formula shows the restriction between hole Solenoid Valve 4 Way 3 Position Valve
diameter and punching thickness. Do not use beyond Mass (Weight) lbs 72
this restriction.

SS400: Max. Punching Thickness <


= 0.8 x Hole Dia.
HS07-1624 SUS304: Max. Punching Thickness <= 0.5 x Hole Dia.
Do not use beyond max. punching thickness.
Punch & Die Sizes (mm):
8, 9, 10, 11, 12, 13, 14, 14.5, 15, 16, 17, 17.5, Electric Needle Scaler Model EJC-32A
18, 19, 20, 20.5, 21, 21.5, 22, 23, 23.5, 24, 25 Specifications
Oblong Punch, Die & Jig Sizes (mm): Power supply : AC115 V or AC230 V, 50/60 Hz
16 x 8 22 x 11 25 x 12 Rated Power Consumption : 300 W
18 x 9 24 x 12 25 x 14 Rated Current : 2.8 A or 1.4 A
20 x 10 25 x 9 25 x 18 Rated Duty : 30 minutes
Stroke Speed : 3000 min
HS11-1624 Standard Accessories Power Cord Length : 2.5 meters
Dimensions : 520 mm(L) x 82 mm(W) x 171.5 mm(H)
Hose Kit Ass’y, Hose Cord Ass’y, Spanner, Spanner 12,
Mass (weight) : 4.5 kg
Sub Handle Ass’y, Chip Guard Ass’y, Hex. Wrench 4, Tool Box.
Vibration Level : 13.0 m/sec2
For HS06-1322 : D Punch/Die 22 mounted on machine Needle dia. & Qty. : Ø2x32 pcs. Ø3x15 pcs.
For HS07-1624
and HS11-1624 : D Punch/Die 22 mounted on machine

PORTABLE MAGNETIC BASE DRILL – Model QA-4000


FOR ONSITE HOLE CUTTING IN STEEL STRUCTURES
Features: Specifications
• Automatic Feed Operation
• One touch cutter replacement Model QA-4000
• Automatic emergency stop feature Power Source
115 V AC
• One-touch/cartridge type Single phase, 50 / 60 Hz
Electric Drill

cutting oil tank Rated Power Consumption W 680


• Load detection function Rated Current A 6.1
• Auto-return function No load Speed rpm 750
• Limit switch function Magnet Power Consumption W 50
Standard Accessories: Hole-cutting capacity Cutter Hole Diameter Plate Thickness
• Pilot pin 08035 A2: 1 pc. One-touch type Jetbroach 35L 11/16" to 1-3/8" 3/8" to 1-3/8"
• Chain: 1 pc. Magnet Holding Power Lbs (kgf) 1,498 (680)
• 3 mm Hex wrench key: 1 pc.
Magnet Dimensions Inch (mm) 3-1/4 X 6-13/16 (82 X 172)
• 8 x 10 mm spanner: 1 pc.
Weight Lbs (kg) 41 (18.5)
• Cutting oil 0.5: 1 can
• Tool Box: 1 pc.

AVAILABLE THROUGH:
WUENSCH SALES CO. (see page 1405)
NITTO KOHKI U.S. A., INC.
HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
0605-0607-03 5/3/06 4:10 PM Page 605

569-06

PULLERS SQUARE DRIVE TORQUE WRENCHES HEX DRIVE TORQUE WRENCHES

• High torque-to-weight ratio, slim nose radius


• High speed, high degree of rotation angle
• Snap in, interchangeable cassettes, no tools required
• 360˚ swivel hose connection allows easier positioning in
confined areas
PULLERS • Optional Allen-Key drives and reaction arms
• High repeatability, with accuracy ± 3%
• Patented “safety cage” jaw retention system • High torque-to-weight ratio, slim nose radius
• Strong unibody design, integrated reaction arm and few
• Roll-threaded shafts for less effort when applying high • High repeatability with accuracy ±3%
moving parts make wrenches durable and reliable
torque • Few moving parts means durability and low maintenance
• Extensive range of metric and imperial hexagon
• Available in 2- and 3-jaw design, for inside and outside • Never-jam mechanism
cassettes and reducers
pulling configuration • Push Button drive release mechanism
• Lock-ring couplers come standard on all torque
• 360° swivel hose connection
No.
wrenches, pumps and hoses
Model Capacity Spread of Operation
Number of jaws Model Typical Socket Square Max Weight 2)
Jaws (tons) (in) Number Size Range Drive Torque 1)
EP-106 .5-7 manual (mm) (in) (in) (Ft.lbs) (lbs) Model Max 1) Weight 2)
3 10 Cassette Range Torque
EP-206 .5-7 manual SQD-25-I 15–50 ⁄16–1 7⁄8
11 3
⁄4 1735 5.52 Number
2 6
EP-110 1.0-15 manual SQD-50-I 20–100
7
⁄8–3 7⁄8 1 3550 9.35 (mm) (in) (Ft.lbs) (lbs)
3 20
EP-210 1.0-15 manual SQD-75-I 30-110 1 1⁄8–4 3⁄8 1 1⁄2 5570 11.90 HXD-30 32–60 11⁄4–2 3⁄8 2425 4.6
2 14
EPH-110 1.0-15 hydraulic SQD-100-I 40–120 1 5⁄8–4 3⁄4 1 1⁄2 7360 17.64 HXD-60 41-80 15⁄8–3 1⁄8 4565 8.1
3 15
EPH-210 1.0-15 hydraulic SQD-160-I 60–155 2 3⁄8–6 1⁄8 1 1⁄2 11,835 26.55 HXD-120 55-100 2 3⁄16–3 7⁄8 9220 16.3
2 15
EPH-113 2.5-18 hydraulic SQD-270-I 80–255 3 1⁄8–10 2 1⁄2 19,875 54.00 HXD-240 80-130 3 1⁄8–5 17860 28.9
3 25
1)
Determine max. torque according to the bolt size and grade.
1)
Determine max. torque according to the bolt size and grade.
EPH-116 3 50 3.0-25 hydraulic 2)
Including reaction arm and square drive.
2)
Including smallest cassette.

PULLER SETS MAINTENANCE SETS NUT SPLITTERS

MULTI-PURPOSE PULLER SETS • The Universal Hydraulic Tool Box • Crack nuts the safe way
• Set comes with pump, hose, cylinder, gauge, adapter and • Power to push, pull, lift, press, straighten, spread and • Compact, ergonomic, lightweight design
case clamp with forces up to 12.5 tons • Includes spare chisel, spare set screw and wrench
• Grip puller, cross bearing puller, bearing cup and bearing • Sets include pump, hose, cylinder, and gauge • Available for hexagon nut size up to 2.88"
puller attachment also included • Numerous attachments permit quick configuration of
specialized tools Model Capacity Hexagon nut sizes Weight
Number (tons) (in) (lbs)

Model Capa- Max Spread Max Reach Weight NC-1319 5 .50-.75 1.8
Number city of Jaws of legs Set Model Capacity Number of Weight NC-1924 10 .75-.94 4.4
(tons) (in) (in) (lbs) Number (tons) attachments (lbs) NC-2432 15 .94-1.13 6.6
BHP-1752 8 9.84 14.00 82 MS2-4 2.5 34 59 NC-3241 20 1.13-1.56 9.7
BHP-2751G 20 19.68 22.50 198 MS2-10 5 35 140 NC-4150 35 1.56-2.00 18.0
BHP-3751G 30 31.50 28.00 380 MS2-20 12.5 13 210 NC-5060 50 2.00-2.25 26.0
BHP-5751G 50 43.30 34.00 657 MS2-1020 5-12.5 53 350 NC-6075 90 2.38-2.88 75.1

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0605-0607-03 5/3/06 4:10 PM Page 606

570-06

SINGLE ACTING, SPRING RETURN DOUBLE ACTING SINGLE OR DOUBLE ACTING

HOLLOW PLUNGER CYLINDERS


HEAVY DUTY CYLINDERS • Spring or hydraulic return
LOW HEIGHT CYLINDERS • Double acting operation provides force in • Hollow plunger design for both push and
• Compact and portable both directions for maximum versatility pull forces
GENERAL PURPOSE CYLINDERS • For use where others will not fit • Plunger and collar threads, base mounting • Safety valve in double action models
• Collar and plunger threads, base • Maximum power to height ratio holes for easy fixturing prevents over pressurizing
mounting holes standard on most models • Large plunger contact area with grooved end • Solid plunger design; built-in safety valve
• For use in all positions Model Cylinder Stroke Collapsed
• For use in industrial, construction and
• Hardened removable grooved saddles Cylinder Stroke Collapsed high cycling production applications Number Capacity Height
Model
Capacity Height (tons) (in) (in)
Number
(tons) (in) (in) Model Cylinder Stroke Collapsed push pull
Model Cylinder Stroke Collapsed Number Capacity Height RCH-120 12 – .31 2.19
RCS-101 10 1.50 3.47
Number Capacity Height (tons) (in) (in) RCH-121 12 – 1.63 4.75
RCS-201 20 1.75 3.88
(tons) (in) (in) push pull RCH-1211 12 – 1.63 4.75
RCS-302 30 2.44 4.63
RC-50 5 .63 1.63 RR-1010 10 4 10.00 16.13 RCH-123 12 – 3.00 7.25
RCS-502 50 2.38 4.81
RC-51 5 1.00 4.34 RR-1012 10 4 12.00 18.00 RCH-202 20 – 2.00 6.38
RCS-1002 100 2.25 5.56
RC-53 5 3.00 6.50 RR-308 30 5 8.25 15.25 RCH-206 20 – 6.10 12.05
RSM-50 5 .25 1.28
RC-55 5 5.00 8.50 RR-3014 30 5 14.50 21.63 RCH-302 30 – 2.50 7.03
RSM-100 10 .44 1.69
RC-57 5 7.00 10.75 RR-506 50 10 6.13 13.06 RCH-306 30 – 6.13 13.00
RSM-200 20 .44 2.03
RC-59 5 9.13 12.75 RR-5013 50 10 13.13 20.06 RCH-603 60 – 3.00 9.75
RSM-300 30 .50 2.31
RC-101 10 1.00 3.53 RR-1006 100 48 6.63 14.06 RCH-606 60 – 6.00 12.75
RSM-500 50 .63 2.63
RC-102 10 2.13 4.78 RR-10013 100 48 13.13 20.63 RCH-1003 100 – 3.00 10.00
RSM-750 75 .63 3.13
RC-104 10 4.13 6.75 RR-1506 150 74 6.13 15.19 RRH-307 30 23 7.00 13.00
RSM-1000 100 .63 3.38
RC-106 10 6.13 9.75 RR-15013 150 74 13.13 22.94 RRH-606 60 41.8 6.50 12.75
RSM-1500 150 .63 3.94
RC-108 10 8.00 11.75 RR-2006 200 112 6.00 16.94 RRH-6010 60 41.8 10.12 17.25
RC-1010 10 10.13 13.75 RR-20013 200 112 13.00 23.94 RRH-1001 100 67.7 1.50 6.50
RC-1012 10 12.00 15.75 RRH-1006 100 67.7 6.00 13.50
RC-1014 10 14.00 17.75 SINGLE ACTING
RC-151 15 1.00 4.88 JACKS
RC-152 15 2.00 5.88
RC-154 15 4.00 7.88
RC-156 15 6.00 10.69
RC-158 15 8.00 12.69
RC-1510 15 10.00 14.69
RC-251 25 1.00 5.50
RC-252 25 2.00 6.50
RC-254 25 4.00 8.50 PULL CYLINDERS
RC-256 25 6.25 10.75 • Chrome plated plunger
• Replaceable links on BRP models ALUMINUM CYLINDERS
RC-258 25 8.25 12.75
• Blow-out protection prevents over • Spring return PREMIUM INDUSTRIAL LINE
RC-2510 25 10.25 14.75 • Lightweight for maximum portability
extending rod • Automatic by-pass port prevents
RC-2514 25 14.25 18.75 • Designed for use in all positions over-extending plunger
RC-308 30 8.25 15.25 Cylinder Stroke Cylinder
• Durable steel base plate
Model Model Cap.
Cap. Model
RC-502 50 2.00 6.94 Number Capacity Effective
Model Cylinder Stroke Collapsed Number Number
RC-504 50 4.00 8.94 (tons) (in) Area (in)
Number Capacity Height (tons) (tons)
RC-506 50 6.25 11.13 BRC-25 2.5 5.00 0.55 (tons) (in) (in) EBJL15GC 1.5 EBJ12GC 12
RC-5013 50 13.25 18.13 BRC-46 5 5.50 1.13 RCA-302 30 2.00 7.16 EBJ2GC 2 EBJS12GC 12
RC-756 75 6.13 11.25 BRC-106 10 5.95 2.32 RCA-304 30 4.00 9.25 EBJL3GC 3 EBJ15GC 15
RC-1006 100 6.63 14.06 BRP-106C* 10 5.95 2.32 RCA-502 50 2.00 6.97 EBJ4GC 4 EBJ20GC 20
RC-10010 100 10.25 17.69 BRP-106L* 10 5.95 2.32 RCA-504 50 4.00 8.97 EBJ6GC 6 EBJS20GC 20
*Fitted with rubber bellows for rod protection.
RCA-506 50 6.00 10.97 EBJ8GC 8

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0605-0607-03 5/3/06 4:10 PM Page 607

571-06

HYDRAULIC HAND PUMPS GASOLINE PUMPS AIR HYDRAULIC PUMPS

COMPOSITE HYDRAULIC HAND PUMPS HYDRAULIC HAND PUMPS PUMPS AIR HYDRAULIC PUMPS 10,000 PSI
• Lightweight design; impact and corrosion • Durable, rugged metal design • Coaxial piston design for high • High efficiency cast aluminum air motor
resistant • External load release valve performance; first-stage piston pump for for increased productivity
• Low handle effort • Internal adjustable pressure relief valve improved efficiency • Reinforced heavy-duty reservoir for
• For single-acting tools and cylinders • For single and double-acting cylinders • High by-pass pressures improve applications in tough environments
• Single-and two-speed operation and tools productivity • New generation air saver piston with
• Available in 2.5, 5.0 and 5.5 hp four-cycle rugged one-piece design reduces air
Model Maximum Displacement Usable Model Max. Displacement Usable motors, with 1-, 2-, 5-, and 10-gallon consumption and operating costs
Number Pressure per Stroke Oil Number Pressure per Stroke Oil reservoirs for use with a wide range of • Quiet – only 76 dBA with low air
(in3) Cap. (in3) Cap. cylinders consumption of 12 scfm
(psi) 1st 2nd (in3) (psi) 1st 2nd (in3) • Operating air pressure: 25-125 psi,
Model Hp Valve Usable
P-141 N/A .055 P-391) 10,000 N/A .16 40 enables pump to start at extremely low
10,000 20 Number type oil cap.
pressure
P-142 10,000 .221 .055 20 P-80 1)
10,000 .99 .15 134 (gal)
• Relief valve setting up to 10,000 psi
P-202 10,000 .221 .055 55 P-8011) 10,000 .99 .15 249 PGM-2404R 2.5 Manual 4/3 1.0
P-391 10,000 N/A .151 55 P-842) 10,000 .99 .15 134 PGM-2304R 2.5 Manual 3/3 1.0 Model For Useable Oil
P-392 .687 .151 P-4621) 10,000 7.69 .29 453 PGM-3420R 5.0 Manual 4/3 5.0 Number Cylinder Capacity
10,000 55
PGM-5440R Manual 4/3 10.0 Type (in3)
P-802 10,000 2.40 .151 155 P-4642) 10,000 7.69 .29 453 6.5
PATG-1102N* SA 127
1)
single acting
2)
double acting PAMG-1402N* DA 127
PARG-1102N** SA 127
* 305 in3 (5 liter) reservoir available:
TORQUE WRENCH HOSE AND COUPLER PATG-1105N, PAMG-1105N
** Remote pendant controlled
PUMPS (11,600 PSI) ASSEMBLIES
FLANGE SPREADERS FLANGE ALIGNMENT

• Corrects twist and rotational misalignment


THERMO-PLASTIC HOSES (700-SERIES) without additional stress in pipelines
TORQUE WRENCH PUMP • For demanding applications, featuring • Integrated wedge concept: Friction-free, • For most commonly used ANSI, API, BS and
• Two stage pump with automatic a 4:1 design factor smooth parallel wedge movement DIN flanges
integrated bypass for faster torque eliminates flange damage and spreading • No slings, hooks, or lifting gear. Extremely
HEAVY-DUTY RUBBER HOSES (900-SERIES)
cycles arm failure safe, high precision
• Rubber coated with 2 layers of steel
• Transparent overlays in Ft. lbs and • For maintenance, commissioning, • ATM-3 fits on the following flanges:
wire braids
Nm, included for all torque wrenches shutdowns, testing, and valve change - Ring Type Joints: flange wall thickness min
produce accurate torque settings and TWIN 3.5:1 SAFETY HOSES (TORQUE outs 1.17" and max 3.90"
precise repeatability WRENCH) • Light weight, portable, easy to use, one - Gasket Type Joints: flange wall thickness
• Customer adjustable pressure relief person operation min .48" and max 4.49"
valve to set hydraulic working • Few moving parts means durability and • Can be installed and used in any position
Model Series Length
pressures low maintenance and any location
Number
• Maximum pressure rating–11,600 psi • Stays stable in position under full load
(ft)
Model Usable Pump Weight HC-9206 900 6.0 Model Max Bolt Hole Flange Weight
Model Max Tip Clearance Max Weight
Number Oil Cap. Type w/ oil HC-9210 900 10.0 Number Lifting Range Wall
Number Spread Spread
(in3) (lbs) HC-7206 700 6.0 Force (in) Force Thickness
PTE-3404B 104 electric 70 HC-7210 700 10.0 (tons) (in) (lbs) (ton) (in) (in) (lbs)
PTA-1404 0.5 air 54 THC-7062 TWIN/TW 19.5 FSM-8. 8 .24 3.16 14.3 ATM-1 0.3 .69 - 1.13 .69 - 2.00 4.4
PTA-3408 1.9 air 125 THC-7122 TWIN/TW 39.0 FSH-14 14 .24 3.16 15.7 ATM-3 3 1.0 - 2.13 1.19 - 4.50 20.1

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0608-03 5/3/06 11:07 AM Page 608

572-06

RATCLIFF HOIST CO.


HAND OPERATED CHAIN HOISTS
Model H-80 (1/4 Ton thru 50 Ton)
Ratchet type brake control in both lifting or lowering. Hoist is constructed of steel. Campbell load
chain standard. Needle bearings, pre-lubricated, are used at the main rotating points in the
mechanism. The top and bottom hooks are made of drop forged steel and swivel 360°. Hook
latches on top and bottom hooks. When ordering specify: Model H-80 and hoist capacity in tons.

Cap- Pulling Load Drawn-Up Approx.


Model acity Effort Chain Dimension Net Wt.
No. Tons Lift Approx. Falls (G) Inches Lbs.
H-80-1⁄2 1⁄2 10’ 59 1 10-15⁄64 27
H-80-1A 1 10’ 48 1 13-47⁄64 35
H-80-1-1⁄2 1-1⁄2 10’ 73 1 13-25⁄32 41
H-80-2 2 10’ 77 1 14-61⁄64 57
H-30-3A 3 10’ 84 1 17 67
H-80-4 4 10’ 69 3 26-3⁄8 98
H-80-5 5 10’ 86 3 26-3⁄8 98
H-80-6 6 10’ 103 3 26-3⁄8 98
H-80-8B 8 10’ 87 3 34-41⁄64 200
H-80-10B 10 10’ 108 3 34-41⁄64 200
H-80-12B 12 10’ 129 3 34-41⁄64 200
H-80-15A 15 10’ 104 5 40-3⁄16 335
H-80-16A 16 10’ 111 5 40-3⁄16 335
H-80-20 20 10’ 108 x 2 6 43-5⁄16 560
1/4 thru 3 Ton 4 thru 12 Ton 15 & 16 Ton 20 Ton
H-80-25A 25 10’ 97 x 2 8 43 635
H-80-30 30 10’ 101 x 2 10 59-1⁄16 1400
H-80-40A 40 10’ 102 x 2 14 70 1320
H-80-50A 50 10’ 104 x 2 20 77 1600

RATCHET AND PAWL TYPE LEVER HOISTS


(3/4 Ton Thru 6 Ton)
Hoist has a cast alloy steel housing. Steel handle works in any of
12 positions. Positive ratchet and pawl mechanism. Hook latches
on top and bottom hooks. All N Series models are designed with a
direct drive for speed. All E Series models are designed with an
internal mechanical advantage of 2-5/8 to 1 for an easier lift.
N SERIES MODELS E SERIES MODELS
Model Rated Net Model Rated Net
No. Capacity Weight No. Capacity Weight
NBC-1 3⁄4 Ton 12-5⁄8 lbs.
Model
EC-1 NDC-1 1-1⁄2 Ton 15-1⁄2 lbs. EC-1 1-1⁄2 Ton 15 lbs.
NDC-2 3 Ton 23 lbs. EC-2 3 Ton 22-1⁄2 lbs.
NDC-3 4-1⁄2 Ton 37 lbs. EC-3 4-1⁄2 Ton 36-1⁄2 lbs.
Model
NDC-1 NDC-4 6 Ton 46-1⁄2 lbs. EC-4 6 Ton 46 lbs.

RATCLIFF HOIST COMPANY


1655 Old County Road, San Carlos, CA 94070 RATCLIFF HOISTS
Tel: (650) 595-3840 • Fax: (650) 595-5687
Toll Free (in U.S.) 800-368-7209 HEAVY DUTY POWER
E-mail: ratcliffhoist@aol.com
0609-03 5/3/06 11:08 AM Page 609

573-06

COFFING HOISTS
MINI HOIST – 550 Lbs. Capacity
Features: Model TB-602
• Standard lift 5’
• Lifts up to 550 lbs
• Comes with convenient toolbox storage
• Plated load chain is standard
• Weston-type load brake
• Rubber hand grip for better comfort and security
• Lightweight design for ease of portability. Use in
confined conditions with one-hand operation
• Forged upper and lower hooks with latches standard
• Impact resistant, all-steel frame, gear case and cover
• Hardened link-type steel load chain for strength and long wear
• Free wheeling feature serves to quickly attach the load
• Metric rated
• Performs just like the larger hoists, but small enough to fit in a
hard hat
Chain Lift w/ Handle Net Weight
Number Dim. One Full Pull @ w/ Standard
Capacity Model Product of dxt Lever W.L.L. Lift
(Lbs.) Number Code Chainfalls (in.) Turn (in.) (Lbs.) (Lbs.)
550 Lbs. TB-602 0210 1 .16 x .47 3.15 56.2 6.0

ELECTRIC WIRE ROPE HOISTS – 1/2 to 2 Tons


Low Headroom Models
SPECIFICATIONS
Capacity Model Suspension Lift Motor Lift Speed Headroom Net Wt.
Lbs. Ton Number Reeving Type (Ft.) HP (fpm) (In.) (Lbs.)
1000 1/2 WRMT-1016-LH 2-part Double Dual 15 1/2 16 14-7/8 387
1000 1/2 WRMT-1016-LH 2-part Double Dual 30 1/2 16 14-7/8 430
1000 1/2 WRMT-1032-LH 2-part Double Dual 15 1 32 14-7/8 397
1000 1/2 WRMT-1032-LH 2-part Double Dual 30 1 32 14-7/8 441
2000 1 WRMT-2016-LH 2-part Double Dual 15 1 16 14-7/8 397
2000 1 WRMT-2016-LH 2-part Double Dual 30 1 16 14-7/8 441
4000 2 WRMT-4014-LH 2-part Double Dual 15 2 14 18-3/16 589
4000 2 WRMT-4014-LH 2-part Double Dual 25 2 14 18-3/16 617
4000 2 WRMT-4014-LH 2-part Double Dual 35 2 14 18-3/16 637
4000 2 WRMT-4021-LH 2-part Double Dual 15 3 21 18-3/16 596
4000 2 WRMT-4021-LH 2-part Double Dual 25 3 21 18-3/16 626
4000 2 WRMT-4021-LH 2-part Double Dual 35 3 21 18-3/16 646

SINGLE-SPEED TROLLEY SPECIFICATIONS LH Models – Specially designed for applications where headroom is
critical. All models include motorized trolleys.
Rated Trolley Trolley Trolley
Load Speed Motor Model
• Rated loads of 1/2 to 2 tons
(Lbs.) (fpm) (HP) Number
• 230/460 volt motor standard. 208 and 575 volt motors optional.
1000 35 1/4 MT-10035
115/230 (single phase) volt motors available on 1/2 and 1 HP units.
1000 75 1/4 MT-10075
2000 35 1/4 MT-20035 • All low headroom models are reeved part double for plumb lift.
2000 75 1/4 MT-20075 • Two-speed available. 3 to 1 ratio (three phase only).
4000 35 1/2 MT-40035 • Adjustable for 6” to 18” American Standard I-Beams with 5-foot
4000 75 1/2 MT-40075 minimum radius.

COFFING ® Note – For Complete Dimensional Data


E-mail: coffing@cmworks.com
Visit our Web Site: www.coffinghoists.com

HOISTS Please see the Coffing Hoists ad in the Advertisement Section.


0610-03 5/3/06 11:10 AM Page 1

574-06

COFFING HOISTS

ELECTRIC WIRE ROPE HOISTS – 1/2 & 1 Ton


Lug and Plain Trolleys

WR, WRT, and TVL Models – Wire Rope Hoists designed for industrial service, the WR incorporates mechanical
load brake, motor brake and overload clutch as standard. Other features are ergonomic-designed push button station,
solid state starting switch, panel plate with numbered connection wires and first stage helical gearing for quiet
operation. Available in single or double reeved models. TVL models available for true vertical lifts.
• Rated loads of 1/2 and 1 ton.
• Adjustable for 6” to 18” American Standard I-Beams with
recommended 4-foot minimum radius.
• 230/460 volt motors standard. 115/230 (single phase), 575
and 208 volt motors are optional.
• Two-speed available, 3 to 1 ratio (three phase only).
• Capacity limiter on all models. Prevents lifting of damaging
overloads while operating hoist.
• Dual brake system consists of mechanical load brake and
multiple disc, direct acting motor brake.
• Adjustable upper and lower limit switches regulate load travel.
• Machined drum with uniform, precise grooving provides
smoother drum winding and longer rope life.
• Fully machined, cast iron wheels equipped with sealed,
lifetime lubricated precision ball bearings for long life.
• True vertical lift models available – see chart below.

SPECIFICATIONS
Lift Headroom
Capacity Model Suspension Lift Motor Speed (In.) Dimensions Net Wt.
Lbs. Ton Number Reeving Type (Ft.) (HP) (fpm) Trolley Lug H W L (Lbs.)
1000 1/2 WRT-1016 2-part Single Single 15 1/2 16 21-13/16 20 8-3/16 12-1/8 31-9/16 203
1000 1/2 WRT-1016 2-part Single Dual 25 1/2 16 22-13/16 21 8-3/16 12-1/8 35-15/16 231
1000 1/2 WRT-1016 2-part Single Dual 35 1/2 16 22-13/16 21 8-3/16 12-1/8 40-5/16 253
1000 1/2 WRT-1032 2-part Single Single 15 1 32 21-13/16 20 8-3/16 12-1/8 31-9/16 221
1000 1/2 WRT-1032 2-part Single Dual 25 1 32 22-13/16 21 8-3/16 12-1/8 35-15/16 239
1000 1/2 WRT-1032 2-part Single Dual 35 1 32 22-13/16 21 8-3/16 12-1/8 40-5/16 254
2000 1 WRT-2016 2-part Single Single 15 1 16 21-13/16 20 8-3/16 12-1/8 31-9/16 211
2000 1 WRT-2016 2-part Single Dual 25 1 16 22-13/16 21 8-3/16 12-1/8 35-15/16 239
2000 1 WRT-2016 2-part Single Dual 35 1 16 22-13/16 21 8-3/16 12-1/8 40-5/16 254
1000 1/2 WRT-1016-TVL 2-part Double Dual 15 1/2 16 21-15/16 20-1/8 8-3/16 12-1/8 42-5/16 253
1000 1/2 WRT-1016-TVL 2-part Double Dual 30 1/2 16 21-15/16 20-1/8 8-3/16 12-1/8 55-1/4 281
1000 1/2 WRT-1032-TVL 2-part Double Dual 15 1 32 21-15/16 20-1/8 8-3/16 12-1/8 42-5/16 261
1000 1/2 WRT-1032-TVL 2-part Double Dual 30 1 32 21-15/16 20-1/8 8-3/16 12-1/8 55-1/4 289
2000 1 WRT-2016-TVL 2-part Double Dual 15 1 16 21-15/16 20-1/8 8-3/16 12-1/8 42-5/16 261
2000 1 WRT-2016-TVL 2-part Double Dual 30 1 16 21-15/16 20-1/8 8-3/16 12-1/8 55-1/4 289

For Lug Mount Hoist, drop “T” from model number prefix (example: WR-1016).

COFFING ® Note – For Complete Dimensional Data


E-mail: coffing@cmworks.com
Visit our Web Site: www.coffinghoists.com

HOISTS Please see the Coffing Hoists ad in the Advertisement Section.


0583-04 5/3/06 11:11 AM Page 1

575-06

COFFING HOISTS

ELECTRIC WIRE ROPE HOISTS – 1/2 & 1 Ton


Motorized Trolleys

WRMT and WRMT-TVL Models – Motorized trolley suspensions with all the features of basic WR Models for added
flexibility in a variety of applications plus models for true vertical lifts.
• Rated loads of 1/2 and 1 ton.
• Adjustable for 6” to 18” American Standard I-Beams with recommended 4-foot
minimum radius.
• 230/460 volt motor standard. 115/230 (single phase), 575 and 208 volt motors are
optional.
• Two-speed available. 3 to 1 ratio (three phase only).
• Heat treated cast iron wheels equipped with sealed, lifetime lubricated precision ball
bearings for long life.
• Dual, articulating trolley mounts have excellent curved beam handling characteristics.
• Compact 4-button control station operates both hoist and trolley.
• True vertical lift models available – see chart below.

SPECIFICATIONS
Capacity Model Suspension Lift Motor Lift Speed Headroom Net Wt.
Lbs. Ton Number Reeving Type (Ft.) HP (fpm) (In.) (Lbs.)
1000 1/2 WRMT-1016 2-part Single Single 15 1/2 16 21-13/16 237
1000 1/2 WRMT-1016 2-part Single Dual 25 1/2 16 22-13/16 280
1000 1/2 WRMT-1016 2-part Single Dual 35 1/2 16 22-13/16 295
1000 1/2 WRMT-1032 2-part Single Single 15 1 32 21-13/16 245
1000 1/2 WRMT-1032 2-part Single Dual 25 1 32 22-13/16 288
1000 1/2 WRMT-1032 2-part Single Dual 35 1 32 22-13/16 303
2000 1 WRMT-2016 2-part Single Single 15 1 16 21-13/16 245
2000 1 WRMT-2016 2-part Single Dual 25 1 16 22-13/16 288
2000 1 WRMT-2016 2-part Single Dual 35 1 16 22-13/16 303
1000 1/2 WRMT-1016-TVL 2-part Double Dual 15 1/2 16 21-15/16 287
1000 1/2 WRMT-1016-TVL 2-part Double Dual 30 1/2 16 21-15/16 330
1000 1/2 WRMT-1032-TVL 2-part Double Dual 15 1 32 21-15/16 297
1000 1/2 WRMT-1032-TVL 2-part Double Dual 30 1 32 21-15/16 341
2000 1 WRMT-2016-TVL 2-part Double Dual 15 1 16 21-15/16 297
2000 1 WRMT-2016-TVL 2-part Double Dual 30 1 16 21-15/16 341

SINGLE-SPEED TROLLEY SPECIFICATIONS


Rated Trolley Trolley Trolley
Load Speed Motor Model
(Lbs.) (fpm) (HP) Number
1000 35 1/4 MT-10035
1000 75 1/4 MT-10075
2000 35 1/4 MT-20035
2000 75 1/4 MT-20075

COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
0612-03 5/3/06 11:17 AM Page 1

576-06

COFFING HOISTS
ELECTRIC WIRE ROPE HOISTS – 2 & 3 Tons
Lug and Plain Trolleys

WR, WRT, and TVL Models – Wire Rope Hoists designed for industrial service, the WR incorporates mechanical
load brake, motor brake and overload clutch as standard. Other features are ergonomic-designed push button station,
solid state starting switch, panel plate with numbered connection wires and first stage helical gearing for quiet
operation. Available in single or double reeved models. TVL models available for true vertical lifts.
• Rated loads of 2 and 3 tons.
• Adjustable for 6” to 18” American Standard I-Beams with
recommended 4-foot minimum radius.
• 230/460 volt motors standard. 575 and 208 volt motors are
optional.
• Two-speed available. 3 to 1 ratio (three phase only).
• Capacity limiter on all models. Prevents lifting of damaging
overloads while operating hoist.
• Dual brake system consists of mechanical load brake and
multiple disc, direct acting motor brake.
• Adjustable upper and lower limit switches regulate load travel.
• Machined drum with uniform, precise grooving provides
smoother drum winding and longer rope life.
• Fully machined, cast iron wheels equipped with sealed,
lifetime lubricated precision ball bearings for long life.
• Hand chain operated geared trolley available.
• True vertical lift models available – see chart below.

SPECIFICATIONS
Lift Headroom
Capacity Model Suspension Lift Motor Speed (In.) Dimensions Net Wt.
Lbs. Ton Number Reeving Type (Ft.) (HP) (fpm) Trolley Lug H W L (Lbs.)
4000 2 WRT-4014 2-part Single Dual 22 2 14 28 26-1/4 11 13-7/8 43-5/16 439
4000 2 WRT-4014 2-part Single Dual 35 2 14 28 26-1/4 11 13-7/8 49-3/16 467
4000 2 WRT-4014 2-part Single Dual 44 2 14 28 26-1/4 11 13-7/8 54-13/16 487
4000 2 WRT-4021 2-part Single Dual 22 3 21 28 26-1/4 11 13-7/8 43-5/16 448
4000 2 WRT-4021 2-part Single Dual 35 3 21 28 26-1/4 11 13-7/8 49-3/16 476
4000 2 WRT-4021 2-part Single Dual 44 3 21 28 26-1/4 11 13-7/8 54-13/16 496
6000 3 WRT-6014 4-part Single Dual 22 3 14 28-7/8 27-1/16 11 13-7/8 54-13/16 528
6000 3 WRT-6014 4-part Single Dual 35 3 14 28-7/8 27-1/16 11 13-7/8 66-9/16 568
4000 2 WRT-4014-TVL 2-part Double Dual 15 2 14 25-3/4 24 11 13-7/8 50-3/8 489
4000 2 WRT-4014-TVL 2-part Double Dual 25 2 14 25-3/4 24 11 13-7/8 57-1/4 517
4000 2 WRT-4014-TVL 2-part Double Dual 35 2 14 25-3/4 24 11 13-7/8 64-3/16 537
4000 2 WRT-4021-TVL 2-part Double Dual 15 3 21 25-3/4 24 11 13-7/8 50-3/8 498
4000 2 WRT-4021-TVL 2-part Double Dual 25 3 21 25-3/4 24 11 13-7/8 57-1/4 526
4000 2 WRT-4021-TVL 2-part Double Dual 35 3 21 25-3/4 24 11 13-7/8 64-3/16 546

For Lug Mount Hoist, drop “T” from model number prefix (example: WR-4014).

COFFING ® Note – For Complete Dimensional Data


E-mail: coffing@cmworks.com
Visit our Web Site: www.coffinghoists.com

HOISTS Please see the Coffing Hoists ad in the Advertisement Section.


585-04 5/3/06 11:18 AM Page 1

577-06

COFFING HOISTS

ELECTRIC WIRE ROPE HOISTS – 2 & 3 Tons


Motorized Trolleys

WRMT and WRMT-TVL Models – Motorized trolley suspensions with all the features of basic WR Models for added
flexibility in a variety of applications plus models for true vertical lifts.
• Rated loads of 2 and 3 tons.
• Adjustable for 6” to 18” American Standard I-Beams with recommended 4-foot
minimum radius.
• Dual articulated trolleys have excellent curved beam handling characteristics.
• 230/460 volt motor standard. 575 and 208 volt motors are optional.
• Two-speed available. 3 to 1 ratio (three phase only).
• Heat treated cast iron wheels equipped with sealed, lifetime lubricated precision ball
bearings for long life.
• Compact 4-button control station operates both hoist and trolley.
• True vertical lift models available – see chart below.

SPECIFICATIONS
Capacity Model Suspension Lift Motor Lift Speed Headroom Net Wt.
Lbs. Ton Number Reeving Type (Ft.) HP (fpm) (In.) (Lbs.)
4000 2 WRMT-4014 2-part Single Dual 22 2 14 28 475
4000 2 WRMT-4014 2-part Single Dual 35 2 14 28 503
4000 2 WRMT-4014 2-part Single Dual 44 2 14 28 530
4000 2 WRMT-4021 2-part Single Dual 22 3 21 28 484
4000 2 WRMT-4021 2-part Single Dual 35 3 21 28 512
4000 2 WRMT-4021 2-part Single Dual 44 3 21 28 539
6000 3 WRMT-6014 4-part Double Dual 22 3 14 28-7/8 563
6000 3 WRMT-6014 4-part Double Dual 35 3 14 28-7/8 622
4000 2 WRMT-4014-TVL 2-part Double Dual 15 2 14 25-3/4 525
4000 2 WRMT-4014-TVL 2-part Double Dual 25 2 14 25-3/4 553
4000 2 WRMT-4014-TVL 2-part Double Dual 35 2 14 25-3/4 580
4000 2 WRMT-4021-TVL 2-part Double Dual 15 3 21 25-3/4 534
4000 2 WRMT-4021-TVL 2-part Double Dual 25 3 21 25-3/4 562
4000 2 WRMT-4021-TVL 2-part Double Dual 35 3 21 25-3/4 589

MOTORIZED TROLLEY SPECIFICATIONS


Rated Trolley Trolley Trolley
Load Speed Motor Model
(Lbs.) (fpm) (HP) Number
4000 35 1/4 MT-40035
4000 75 1/2 MT-40075
6000 35 1/4 MT-60035
6000 75 1/2 MT-60075

COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
0614-03 5/3/06 11:19 AM Page 614

578-06

COFFING HOISTS
ELECTRIC CHAIN HOISTS – HOOK & LUG SUSPENSION MODELS
EC MODELS – Hoists engineered for heavy duty industrial service. Designed for
safety, the EC incorporates mechanical load brake, motor brake, and overload
clutch as standard. Other features are ergonomic-designed push button station,
five-pocket load sheave, solid-state starting switch, adjustable limit switch, panel
plate with numbered connection wires, and chain end stop assembly.
• CAPACITIES & LIFTS – Rated loads from 1/4 to 5 tons, with 10, 15, and
20-foot standard lifts. Standard push button drop is 4 feet less than lift.
• VOLTAGES & MOTOR OPTIONS – 115/230, 208 - single phase; 230/460,
208, 220/380, 575 - three phase. 60 Hertz standard, 50 hertz available.
Two-speed motors available (3 to 1 speed ratio).
• SUSPENSION OPTIONS – Rigid or swivel top hook, lug, plain, geared,
and motorized trolley available.
• SMALL FRAME DESIGN – Features housings of cast aluminum alloy
construction for minimum weight. Engineered and designed for use with
motors up to 1 HP.
• LARGE FRAME DESIGN – Features load bearing housings of ductile iron
construction for maximum strength. Non-load bearing housings of cast
aluminum alloy for minimum weight. Engineered and designed for use with
1/4 - 5 Ton
higher torque 2 and 3 HP three phase motors.
• DURABLE CONSTRUCTION – Built in compliance with ASME/ANSI B30.16
and CSA standards.

Capacity Model Frame* No. of Motor Lift Speed (FPM) Headroom Housing Dimensions (in.) Net Wt.**
(Lbs.) (Ton) Number Size Chains HP Single Two (In.) H W L (Lbs.)
500 1/4 EC-0516 S 1 1/4 16 5.3 16-7/8 8 11-5/8 23-3/8 100
500 1/4 EC-0532 S 1 1/2 32 10.7 16-7/8 8 11-5/8 23-3/8 108
500 1/4 EC-0564 S 1 1 64 21.3 16-7/8 8 11-5/8 23-3/8 116
1000 1/2 EC-1009 S 1 1/4 9 3 16-7/8 8 11-5/8 23-3/8 104
1000 1/2 EC-1016 S 1 1/2 16 5.3 16-7/8 8 11-5/8 23-3/8 106
1000 1/2 EC-1032 S 1 1 32 10.7 16-7/8 8 11-5/8 23-3/8 118
2000 1 EC-2004 S 2 1/4 4 1.3 18-1/4 8 11-5/8 23-3/8 116
2000 1 EC-2008 S 2 1/2 8 2.7 18-1/4 8 11-5/8 23-3/8 116
2000 1 EC-2012 S 1 3/4 12 4 16-7/8 8 11-5/8 23-3/8 114
2000 1 EC-2016 S 1 1 16 5.3 16-7/8 8 11-5/8 23-3/8 118
2000 1 EC-2032 L 1 2 32 10.7 23 10-7/8 14-13/16 31-3/16 295
4000 2 EC-4006 S 2 3/4 6 2 18-15/16 8 11-5/8 23-3/8 127
4000 2 EC-4008 S 2 1 8 2.7 18-15/16 8 11-5/8 23-3/8 133
4000 2 EC-4016 L 1 2 16 5.3 23 10-7/8 14-13/16 31-3/16 295
4000 2 EC-4024 L 1 3 24 8 23 10-7/8 14-13/16 31-3/16 302
6000 3 EC-6005 S 3 1 5 1.7 23-1/4 8 12 26-3/8 200
6000 3 EC-6010 L 2 2 10 3.3 27-3/8 10-7/8 14-13/16 31-3/16 340
6000 3 EC-6016 L 2 3 16 5.3 27-3/8 10-7/8 14-13/16 31-3/16 347
8000 4 EC-8008 L 2 2 8 2.7 27-3/8 10-7/8 14-13/16 31-3/16 345
8000 4 EC-8012 L 2 3 12 4 27-3/8 10-7/8 14-13/16 31-3/16 352
10000 5 EC-10005 L 3 2 5 1.7 27-7/8 10-7/8 14-13/16 31-3/16 393
10000 5 EC-10008 L 3 3 8 2.7 27-7/8 10-7/8 14-13/16 31-3/16 393
* S = Small frame hoist, parallel mounted, single or three phase. L = Large frame hoist, cross mounted, three phase only.
** For 10 ft. lift, top hook suspension and lug suspension units.

COFFING ® Note – For Complete Dimensional Data


E-mail: coffing@cmworks.com
Visit our Web Site: www.coffinghoists.com

HOISTS Please see the Coffing Hoists ad in the Advertisement Section.


0587-04 5/3/06 11:20 AM Page 1

579-06

COFFING HOISTS

TROLLEY SUSPENSIONS (EC Models)


ECT, ECGT, and ECMT Models – Plain, geared, and motorized trolley
suspensions with all the features of basic EC models for added flexibility in a
variety of applications.
• PLAIN TROLLEY – For manual positioning of hoist and load.
• GEARED TROLLEY – For more precise positioning of hoist and load.
Standard hand chain drop is 2 feet less than lift.
• MOTORIZED TROLLEY – For faster positioning of hoist and load over longer
distances. 35 or 75 FPM speeds standard with optional speeds of 18, 24, 50,
100, and 150 FPM.
• VOLTAGES – 115/230, 208 - single phase; 230/460, 208, 220/380, 575 - three
phase. 60 Hertz standard, 50 hertz available.
• TWO-SPEED MOTORIZED TROLLEY MODELS – Optional with 3 to 1 speed
ratio, three-phase, single voltage only.
• WRAP-AROUND SIDE PLATES – Act as safety lugs and as bumpers to protect
wheels. Available to fit American Standard I-Beams, wide-flange, and patented
track beams. Specify track type and beam size.
• PRECISION TROLLEY WHEELS – Machined, cast iron wheels with sealed,
lifetime lubricated ball bearings for extended trolley life. Motorized trolley wheels
heat treated for added durability. Bronze and stainless steel wheels optional.
• TWO TROLLEY DESIGNS – 4-wheel design on 1/4 - 3 ton negotiates 48” 1/4 - 5 Ton
minimum radius curve, including patented track applications. 8-wheel design on
4 and 5 ton reduces beam flange stress.

Capacity Model Frame* Trolley‡ ECT & ECGT ECMT Flange Beam Min. Rad. Net Wt.** ECMT Net † Specify ECT for plain trolley,
(Lbs.) (Ton) Number size Mount Hdrm. (In.) Hdrm. (In.) Width (In) Ht. (In.) Curve (In.) (Lbs.) Wt. (Lbs.) ECGT for geared trolley, and
ECMT for motorized trolley
500 1/4 EC(†)-0516 S P 17-1/4 17-1/4 3.332-6 6-18 48 145 180 models.
500 1/4 EC(†)-0532 S P 17-1/4 17-1/4 3.332-6 6-18 48 153 188 * S = Small frame hoist, single or
500 1/4 EC(†)-0564 S P 17-1/4 17-1/4 3.332-6 6-18 48 161 196 three phase. L = Large frame
1000 1/2 EC(†)-1009 S P 17-1/4 17-1/4 3.332-6 6-18 48 151 186 hoist, three phase only.
≠ P = Parallel mount, standard on
1000 1/2 EC(†)-1016 S P 17-1/4 17-1/4 3.332-6 6-18 48 151 186 small frame hoists. C = Cross
1000 1/2 EC(†)-1032 S P 17-1/4 17-1/4 3.332-6 6-18 48 163 198 mount, standard on large frame
2000 1 EC(†)-2004 S P 18-5/8 18-5/8 3.332-6 6-18 48 161 196 hoists.
2000 1 EC(†)-2008 S P 18-5/8 18-5/8 3.332-6 6-18 48 161 196 ** Weight for 10 ft. lift ECT units.
Add 10 lb. for ECGT unit weights.
2000 1 EC(†)-2012 S P 17-1/4 17-1/4 3.332-6 6-18 48 158 194 *** 4 & 5 ton straight track only.
2000 1 EC(†)-2016 S P 17-1/4 17-1/4 3.332-6 6-18 48 163 198 Articulated model for 48” min.
2000 1 EC(†)-2032 L C 21-9/16 22-1/4 3.332-6 6-18 48 347 375 radius curved track available.
4000 2 EC(†)-4006 S P 19-5/16 19-5/16 3.332-6 6-18 48 172 207
4000 2 EC(†)-4008 S P 19-5/16 19-5/16 3.332-6 6-18 48 178 213
4000 2 EC(†)-4016 L C 21-9/16 22-1/4 3.332-6 6-18 48 347 375
4000 2 EC(†)-4024 L C 21-9/16 22-1/4 3.332-6 6-18 48 354 362
6000 3 EC(†)-6005 S P 23-1/4 24 3.332-6 6-18 48 260 320
6000 3 EC(†)-6010 L C 26 26-5/8 3.332-6 6-18 48 396 424
6000 3 EC(†)-6016 L C 26 26-5/8 3.332-6 6-18 48 403 431
8000 4 EC(†)-8008 L C 25-15/16 26-3/4 4-6 8-18 *** 520 560
8000 4 EC(†)-8012 L C 25-15/16 26-3/4 4-6 8-18 *** 527 567
10000 5 EC(†)-10005 L C 29-3/4 30-5/8 4-6 8-18 *** 561 599
10000 5 EC(†)-10008 L C 29-3/4 30-5/8 4-6 8-18 *** 568 606

®
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. COFFING ® HOISTS
COFFING HOISTS
Country Club
Country ClubRoad
Road • PO BoxBox
• PO 779779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. FAX (attn: Dept. MA) 704-583-0594
www.coffinghoists.com
0616-03 5/3/06 11:20 AM Page 1

580-06

COFFING HOISTS

ACCESSORIES FOR ELECTRIC CHAIN HOISTS (EC Models)

CHAIN CONTAINERS – Recommended where slack chain may create a hazardous condition. Containers suspend
from hoist and do not interfere with hoist operation. Suspension bracket included.

For Small Frame EC Models EC-0516 - EC-4008 (except EC-2032), EC-6005


CAPACITY (in Feet Per Hoist Lift)
Model Dimension 1-Chain 2-Chain 3-Chain
Number (in.) Single Double Triple
927JG17 10-7/16 20 10 N/A
927JG18 12-1/2 25 12.5 N/A
927JG19 16 35 17.5 12
927JG20 20-1/4 50 25 17
927JG202A 20 75 37 25
927JG203A 24 100 50 33
927JG204A 35 150 75 50
For Large Frame EC Models EC-2032, EC-4016 - EC-10008 (except EC-6005)
927JG201 16 15 N/A N/A
927JG202 20 30 15 10
927JG203 24 50 25 16.5
927JG204 35 75 37.5 25
927JG205 48-3/4 100 50 33.3
927JG207 26 150 75 50
927JG208 32 200 100 66.6

WEATHER RESISTANT COVERS

• Models – To fit EC models.


• Material – Waterproof to protect hoist in outdoor use.
• Safety – Does not interfere with normal hoist operation while in place.

For Small Frame EC Models EC-0516 - EC-4008 (except EC-2032)


Hoist Rated Load (Lbs.) Type of Mount Part Number
500 Hook or Lug EC-760-1
1000 Hook or Lug EC-760-2
2000 Hook or Lug EC-760-3
4000 Hook or Lug EC-760-4
6000 Not Available Not Available
For Large Frame EC Models EC-2032, EC4016 - EC-10008 (except EC-6005)
4000 Hook EC-761 -1
4000 Lug EC-761-2
6000 Hook EC-761-3
6000 Lug EC-761-4
8000 Lug EC-761-5
10000 Lug EC-761-6

COFFING ® Note – For Complete Dimensional Data


E-mail: coffing@cmworks.com
Visit our Web Site: www.coffinghoists.com

HOISTS Please see the Coffing Hoists ad in the Advertisement Section.


0589-04 5/3/06 11:21 AM Page 1

581-06

COFFING HOISTS
ELECTRIC CHAIN HOISTS – EC Models
Features and Applications

Corrosion Semi-Automatic
Resistant • Requires only a momentary depression of push
Features button to raise or lower hook to preset position.
• Zinc plated load chain, • Limit switch permits adjustment of end stops
hand chain, and hook anywhere within range of lifts.
• Stainless steel limit • Stop button allows stops between limits.
switch shaft & wheels
• Bronze wheels Multi-Level
• Epoxy paint • Hoist can be specified with multiple control
pendants or wall stations.
Spark Resistant Features
• Stainless steel load chain, bottom block assembly, Inching Controls
trolley wheels, and hooks • Selector switch allows hoist operation in normal or
• Bronze hooks and trolley wheels jog mode.
• Aluminum hand chain • In jog mode, each depression of button advances
• Rubber trolley bumpers hook a fraction of an inch (field adjustable).
• Can be supplied with jog adjustment potentiometer
Tandem Applications inside hoist enclosure or on push button station.
• Twin hooks move long, unwieldy loads.
Patented Carrier
• Push button control station allows hoist to be operated
• Rated load from 1/4 to 3 tons.
either simultaneously or individually.
• On request, hoist units can be furnished with suitable
• Hoists connected mechanically or electrically.
lugs for mounting on patented track carriers.
• Available with plain, geared, and motorized trolleys.
Key Lock
Twin Hook • Key lock on push buttons prevent unauthorized
• Same as tandem trolley application, except hoist has hoist use.
hook or lug suspension for fixed position operation. • Multiple stations keyed unlike – unless specified.

How to Specify Electric Chain Model Numbers

EC - 05 16 - 1 - 10

MODELS CAPACITY LIFT VOLTAGE LIFT


(Lb.) SPEED
EC Electric Chain, Hook Mounted 05 500 16 16 FPM 1 115/230 V (Single Speed) 10 10 ft.
ECT Electric Chain, w/Plain Trolley 10 1000 06 6 FPM 3 230/460 V (Single Speed) 20 20 ft.
ECGT Electric Chain, w/Geared Trolley 40 4000 09 9 FPM 5 575 V (Single Speed) 30 30 ft.
ECMT Electric Chain, w/Motorized Trolley 60 6000 10 10 FPM 6 575 V (Two Speed) 35 35 ft.

COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
3066 - 04 5/3/06 11:22 AM Page 1

582-06

COFFING HOISTS

ELECTRIC CHAIN HOISTS


HOOK & LUG – JLC Series

• Top Suspension - Quick change from hook mount to lug mount.


• Wrap-around side plates - Act as safety lugs and as bumpers
to protect wheels. Available to fit American Standard I-Beams,
wide-flange, and patented track beams.
• H4 duty rating
• Weather resistant - Hoist is NEMA 3R enclosure.
• Five-Pocket load sheave - Provides smoother lifting and
reduces chain wear.
• Mechanical overload protection device - Helps protect hoist,
operator, and supporting structures from damaging overloads,
chain jamming and reverse phasing.
• Limit switches - Adjustable to regulate upper and lower
load travel.
• Multiple disc motor brake
• Chain end stop assembly - Fits below dead end link on lifting
chain for added measure of protection.
• Oil bath transmission - Precision machined alloy steel gears
run in oil bath for longer, quieter operation.
• Capacities & Lifts - Standard lifts of 10, 15 and 20 feet.
CSA approved.
• Voltages - 115/230 - single phase, switchable between 115
& 230; 230/460, 208, 380, 415, 575 – three phase 60 Hertz
standard, 50 Hertz available. Specify voltage.
• IEC Style Electrical Controls
• Hoist Motor – Finned aluminum housing and Class F insulation.
2-speed with 3 to 1 speed ratio available.

Capacity Model No. of Motor Lift Speed (FPM) Headroom* Housing Dimensions (in.) Net Wt.**
(lb.) (ton) Number Chains HP Single Two (in.) H W L (lb.)
250 1/8 JLC-0232 1 1/4 32 10.7 18-1/8 8-11/16 8-11/16 24-1/8 63
500 1/4 JLC-0516 1 1/2 16 5.3 18-1/8 8-11/16 8-11/16 24-1/8 63
500 1/4 JLC-0532 1 1/2 32 10.7 18-1/8 8-11/16 8-11/16 24-1/8 75
1000 1/2 JLC-1016 1 1/2 16 5.3 18-1/8 8-11/16 8-11/16 24-1/8 75
1000 1/2 JLC-1032 1 1 32 10.7 18-1/8 8-11/16 8-11/16 24-1/8 88
2000 1 JLC-2016 1 1 16 5.3 18-1/8 8-11/16 8-11/16 24-1/8 90
4000 2 JLC-4008 2 1 8 2.7 20-13/16 8-11/16 8-11/16 24-1/8 100
* For hook and lug mounted models only. **Weight and dimensions for 10 ft. lift, single phase, top hook and lug suspension units.

COFFING ® Note – For Complete Dimensional Data


E-mail: coffing@cmworks.com
Visit our Web Site: www.coffinghoists.com

HOISTS Please see the Coffing Hoists ad in the Advertisement Section.


3065-04 5/3/06 11:23 AM Page 1

583-06

COFFING HOISTS
ELECTRIC CHAIN HOISTS
TROLLEY MOUNT – JLC SERIES
• Manual & motorized trolleys - cross mounted, single and
dual speed models.
• Wrap-around side plates - Act as safety lugs and as bumpers
to protect wheels. Available to fit American Standard I-Beams,
wide-flange, and patented track beams.
• Precision trolley wheels - Dual tread trolley wheels fit either flat
or tapered I-Beams. Also available in bronze or stainless steel.
• H4 duty rating
• Weather resistant - Hoist is NEMA 3R enclosure.
• Five-Pocket load sheave - Provides smoother lifting and
reduces chain wear.
Manual
• Mechanical overload protection device - Helps protect hoist,
operator, and supporting structures from damaging overloads,
chain jamming and reverse phasing.
• Limit switches - Adjustable to regulate upper and lower
load travel.
• Multiple disc motor brake
• Chain end stop assembly - Fits below dead end link on lifting
chain for added measure of protection.
• Oil bath transmission - Precision machined alloy steel gears
run in oil bath for longer, quieter operation.
• Capacities & Lifts - Standard lifts of 10, 15 and 20 feet.
CSA approved.
• Voltages - 115/230 - single phase, switchable between 115
& 230; 230/460, 208, 380, 415, 575 – three phase 60 Hertz
standard, 50 Hertz available. Specify voltage.
Motorized
• IEC Style Electrical Controls
• Hoist Motor – Finned aluminum housing and Class F insulation.
2-speed with 3 to 1 speed ratio available.

Capacity Model Trolley ‡ JLCET JLCMT JLCET Flange* Beam Min. Rad. JLCET JLCMT
(lb.) (ton) Number Mount Hdrm (in.) Hdrm (in.) Width (in.) Ht. (in.) Curve (in.) Net Wt. (lb.) Net Wt. (lb.)
250 1/8 JLC(†)-0232 C 17-15/16 17-15/16 3-8 5 - 12 48 87 173
500 1/4 JLC(†)-0516 C 17-15/16 17-15/16 3-8 5 - 12 48 87 173
500 1/4 JLC(†)-0532 C 17-15/16 17-15/16 3-8 5 - 12 48 99 185
1000 1/2 JLC(†)-1016 C 17-15/16 17-15/16 3-8 5 - 12 48 91 185
1000 1/2 JLC(†)-1032 C 17-15/16 17-15/16 3-8 5 - 12 48 112 198
2000 1 JLC(†)-2016 C 17-15/16 17-15/16 3-8 5 - 12 48 114 200
4000 2 JLC(†)-4008 C 20-5/8 20-5/8 3.33 - 8 6 - 18 60 156 210
† Specify JLCET for plain trolley and JLCMT for motorized trolley models. ‡ C = Cross mount, standard on all JLC trolley models.
* For JLCMT models, standard flange adjustment is 3.33 - 7”.

COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
0618-03 5/3/06 11:24 AM Page 1

584-06

COFFING HOISTS
Model SLC SHOP HOIST – 250 – 1000 lbs. Capacity
• H4 duty cycle (300 motor starts/hour). • D.C. braking system
• Standard protector overload device • Cast aluminum alloy frame
• 10-pocket oblique lay liftwheel provides longer chain wear • 5:1 design factor
• Epoxy powder coat finish • Rigid hook suspension prevents tangling of power cord
• 6-1/2 ft. power cord with molded 3-prong plug on 115-volt units • Hardened forged steel, latch-style lower hook rotates 360°
• NEMA 4 industrial-rated pendant control • True vertical lift
• Gear train – lifetime lubricated with non-oxidizing grease • Totally enclosed, non-ventilated hoist frame protects motor from
• Alloy load chain (zinc plated optional) environmental contamination
• Thermally protected hoist duty motor • Optional impact-resistant chain container available

Product Code Lifting Approx.


Capacity Speed Lift Ship Wt.
(Lbs.) ***115-1-60 115-1-60 230-3-60 460-3-60 F.P.M. Reeving (Ft.) (Lbs.)
250 15007W — — — 16 single 10 26
250 — 1500W 15013W 15030W 16 single 10 28
250 — — 15014W 15031W 24 single 10 28
250 — — 15015W 15032W 40 single 10 28
300 15008W — — — 16 single 10 26
300 — 15002W 15016W 15033W 16 single 10 28
300 — — 15017W 15034W 24 single 10 28
300 — — 15018W 15035W 40 single 10 28
500 15010W — — — 8 double 10 32
500 — 15004W 15022W 15039W 8 double 10 34
500 15009W — — — 12 single 10 26
500 — 15003W 15020W 15037W 12 single 10 28
500 — — 15019W 15036W 16 single 10 28
500 — — 15023W 15040W 20 double 10 34
500 — — 15021W 15038W 24 single 10 28
600 15011W — — — 8 double 10 34
600 — 15005W 15024W 15041W 8 double 10 34
600 — — 15025W 15042W 12 double 10 34
600 — — 15026W 15043W 20 double 10 34
1000 15012W — — — 6 double 10 34
1000 — 15006W 15027W 15044W 6 double 10 34
1000 — — 15028W 15045W 8 double 10 32
1000 — — 15029W 15046W 12 double 10 32
**Contactor in PB Station

TMM-140-A WIRE ROPE HOIST

• Weighs less than 20 pounds and operates at 100% (A5) duty cycle
• Efficient rotary vane motor provides high uniform torque for quick response, and smooth, quiet operation
• Handle-mounted pendant control can be adjusted for right or left-handed operation. Sure-grip handle provides
easy one-handed use.
• Precise and infinite speed control for accurate load spotting
• Auto-Stop Valve prevents lowering the unit past the maximum reach; wire rope will not reverse-wind in the hoist.
• Swivel top and bottom hooks with latches standard, for portability and quick installation
• Self-winding lifting cable stores conveniently inside unit.
• Disc Brake secures load and eliminates drift when pendant is released.
• Note - 3/8” NPT air filter - regulator - lubricator is needed for effective operation.
Spark resistant features are not available.

Std. Rope Lift Speeds (FPM) Housing Max Air* Net


Capacity Model Lift Dia. Load No Load Air Consumption Headroom Dimension (In.) Pres. Weight
(Lb.) (kg) Number (Ft.) (mm) (Up) (Down) (Up) (Down) (m3/min) (ft3 / min) (in.) D W L (psi) (Lb.)
300 140 TMM-140-A 6’ 6” 4 36 59 49 39 0.6 21.2 22.55 8.17 8.82 23.64 70-95 18.7

COFFING ® Note – For Complete Dimensional Data


E-mail: coffing@cmworks.com
Visit our Web Site: www.coffinghoists.com
HOISTS Please see the Coffing Hoists ad in the Advertisement Section.
0591-04 5/3/06 11:25 AM Page 619

585-06

COFFING HOISTS
AIR POWER – MODEL CAH – LARGE FRAME
Variable Speed Control

Coffing Large Frame, Model CAH Air Powered Hoist – Large frame air chain hoists featuring
continuous duty service for precise, infinitely variable speed and accurate load spotting.
• CAPACITIES & LIFT – Rated loads of 1, 2 & 3 ton. 10-foot standard lift, longer lifts available.
• CONTROLS – Pendant throttle is full-flow design. 6-foot pendant hose length for
10-foot lift (4 feet less than lift is standard).
• THROTTLE VALVE – Precision throttle valves meter air for smooth starts.
• SUSPENSION – Swivel top and bottom hooks with safety latches standard. Rigid top
hook, lug, plain, geared, and air motor trolleys available.
• SPEEDS – Precise and infinitely variable speed control for accurate load spotting.
90 PSI air operating pressure.
• ALUMINUM HOUSING – Lightweight, compact, and strong.
• MOTOR – 8-vane rotary air motor produces high, uniform torque and quick response.
Internal muffler for quiet operation.
• GEARING – Combination of precision cut, heat-treated helical and spur gears for
efficient operation.
• MECHANICAL LOAD BRAKE – Positive acting Weston-type load brake holds the
load and provides exacting load spotting and control.
• OVERLOAD CLUTCH – Protects hoist, operator, and supporting structures from
1/2 - 3 Ton
damaging overloads. Clutch acts as upper and lower limits.
• SPARK RESISTANT MODELS – Rated loads 1/2, 1 & 2 ton.
• OPTIONS – Corrosion resistant models and chain containers also available.
• AIR SUPPLY – Inlet size: 3/4” NPTF; Supply hose: 3/4” I.D. min.

SPECIFICATIONS Model CAH Air Hoists – Large Frame


Lift Speeds** ‡ Air Net †
Capacity Model Number (FPM) Headroom Pressure Dimensions Weight
Lbs. Ton Number of Chains Lifting Lowering (In.) (PSI) H W L (Lbs.)
2000 1 CAH-2013 1 13 18 16-9/16 90 11-1/16 12-15/16 19-7/8 93
2000 1 CAH-2030 1 30 42 16-9/16 90 11-1/16 12-15/16 19-7/8 95
4000 2 CAH-4006 2 6 9 22-1/4 90 12-13/16 12-15/16 19-7/8 110
4000 2 CAH-4015 2 15 21 22-1/4 90 12-13/16 12-15/16 19-7/8 112
6000 3 CAH-6004 3 4 6 24 90 14-3/8 12-15/16 19-7/8 144
6000 3 CAH-6010 3 10 14 24 90 14-3/8 12-15/16 19-7/8 146

Spark Resistant Models


1000 1/2 CAH-0516-S 1 16 22 16-3/4 90 11-1/16 12-15/16 19-7/8 95
2000 1 CAH-1008-S 2 8 11 22-7/8 90 12-13/16 12-15/16 19-7/8 112
4000 2 CAH-2005-S 3 5 7 25-7/8 90 14-3/8 12-15/16 19-7/8 146
* Speeds based on 90 PSI line pressure and with full rated load.
‡ Headroom dimension given for swivel top hook suspension only.
Air Consumption: 70 SCFM (full load - full speed) slow speed model; 80 SCFM (full load - full speed) fast speed model.
Standard lift 10 ft. Longer lifts are available.

COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
0620-03 5/3/06 11:28 AM Page 620

586-06

COFFING HOISTS
AIR POWER – MODEL CAH – SMALL FRAME
Continuous Duty – Precise Positioning

Coffing Small Frame, Model CAH Air Powered Hoist – Small frame air chain
hoists features accurate load spotting for specialized lifting applications.
• CAPACITIES & LIFT – Rated loads of 1/4, 1/2, and 1 ton. 10-foot standard
lift, longer lifts available.
• CONTROLS – Pull Cord provides a lightweight, economical option for
accurate control of loads. Pendant Throttle provides one-hand control for
ease of operation. 6-foot control drop length for 10-foot lift (4 feet less than
lift is standard).
• CHAIN OPTIONS – Link-type or roller-type load chain.
• SUSPENSION – Swivel top and bottom hooks with safety latches standard.
Rigid top hook, lug, plain, geared, and air motor trolleys available.
• COMPACT CONSTRUCTION – Ideal for use in areas with restricted space.
Aluminum housing provides strength and portability.
• MOTOR – 8-vane motor provides high torque, smooth starting, and excellent
load control.
• LIMIT STOPS – Prevent over-travel in upper and lowering directions.
• BRAKE – Heavy-duty shoe-type with proven design for stopping and holding
loads. Externally adjustable.
• SPARK RESISTANT MODELS – Rated loads of 3/8 and 3/4 ton.
• OPTIONS – Chain container available. Plated chain optional for corrosion
resistance.
• AIR SUPPLY – Inlet size: 3/8” NPTF; Supply hose: 1/2” I.D. min.;
Exhaust: 1/2” NPTF; Consumption: 48 SCFM at 90 PSI. 1/4 - 1 Ton

• LIFETIME WARRANTY

SPECIFICATIONS Model CAH Air Hoists – Small Frame


Lift Speeds** ‡ Air Net †
Capacity Type Model Number (FPM) Headroom Pressure Dimensions Weight
Lbs. Ton Chain Number of Chains Lifting Lowering (In.) (PSI) H W L (Lbs.)
500 1/4 Link CAH-0565 1 65 95 15-1/4 90 10-1/4 9-5/8 12-1/8 36
1000 1/2 Link CAH-1045 1 45 120 15-1/4 90 10-1/4 9-5/8 12-1/8 36
2000 1 Link CAH-2023 2 23 60 18 90 10-1/4 9-5/8 12-1/8 49
500 1/4 Roller CAH-0565 1 65 95 15-1/4 90 10-1/4 9-5/8 12-1/8 37
1000 1/2 Roller CAH-1045 1 45 120 15-1/4 90 10-1/4 9-5/8 12-1/8 37
2000 1 Roller CAH-2023 2 23 60 18 90 10-1/4 9-5/8 12-1/8 51

Spark Resistant Models


750 3/8 Link CAH-0760 1 60 100 15-1/4 90 10-1/4 9-5/8 12-1/8 36
1500 3/4 Link CAH-1529 2 29 52 18 90 10-1/4 9-5/8 12-1/8 49
* Equipped w/ 6-foot pendant control. NOTE: For complete dimensional data, refer to Coffing Dimensional Databook.
‡ Headroom dimension given for swivel top hook suspension only.
† Add 10 lbs. to Pull Cord Model for Net Weight on Pendant Model.
**Speeds based on 90 PSI line pressure and with full rated load. NOTE: Hoist speeds are adjustable and can be reduced.
Shipped from factory w/ hoisting speed set to maximum rated speed; lowering speed set at rated speed.

COFFING ® Note – For Complete Dimensional Data


E-mail: coffing@cmworks.com
Visit our Web Site: www.coffinghoists.com

HOISTS Please see the Coffing Hoists ad in the Advertisement Section.


593 5/3/06 11:29 AM Page 1

587-06

J.D. NEUHAUS L.P.

AIR HOISTS
From 6 Ton To 100 Ton Capacity,
Air Pressure 85 psi (6 bar)
• Impervious to dust, vapors, humidity and temperatures
• Unlimited switching and operation frequency
• Explosion proof
• Variable speed control
• Positive start system ensures a smooth start
and consistent operation.
Options: Spark resistant package
Chain container
Offshore paint
Delta-P overload protection

TECHNICAL
Type 6 TI 10 TI 16 TI 20 TI 25 TI 37 TI 50 TI 100 TI
Capacity mt 6.3 10 16 20 25 37 50 100
No. of chain strands # 2 3 4 2 3 4
Motor output kw 3.5 2.6 6 10
ft/min 16.4 10.49 6.56 3.28 7.55 5.25 4.26 2.3
without load
m/min 5 3.2 2 1 2.3 1.6 1.3 0.7
Lifting speed
ft/min 8.2 5.24 3.28 1.64 3.61 2.13 1.48 1.15
at full load
m/min 2.5 1.6 1 0.5 1.1 0.65 0.45 0.35
ft/min 17.71 11.15 6.89 4.26 6.23 4.92 4.59 2.62
Lowering speed at full load
m/min 5.4 3.4 2.1 1.3 1.9 1.5 1.4 0.8
cfm 142 102.7 194.8 390
Air consumption at full load
m3/min 4.0 2.9 5.5 11
Air connection inch G3/4 G1 G1-1/2
Weight with lbs 242 343 528 627 1096 1936 1881 5412
standard lift kg 110 156 240 285 498 880 855 2460
Chain dimension mm 13 x 36 16 x 45 22 x 66 31 x 90
lbs/ft 2.55 3.9 7.25 14.3
Weight of chain
kg/m 3.8 5.8 10.8 21.3
feet 10
Standard lift
m 3

DIMENSIONS
Dimensions 6 TI 10 TI 16 TI 20 TI 25 TI 37 TI 50 TI 100 TI
inch 26.5 32.0 35.4 42.9 50.5 57.7 66.9 86.6
A min. headroom*
mm 674 813 898 1090 1282 1466 1700 2200
inch 17.9 21.6 23.5 27.9 37.9 36.8 45.7 63
B
mm 454 548 598 708 963 935 1160 1600
inch 9.2 12.1 15.0 15.4 15.5 14.84 17.4 27.8
C
mm 233 308 382 390 393 377 442 705
inch 19.0 22.6 27.0 30.2 33 31.77 38.7 55.8
D
mm 483 575 692 768 839 807 983 1417
inch 1.6 1.7 2.1 2.9 4.05 4.7
E1 & E2
mm 40 44 53 75 103 120
inch 5.5 7.1 4.3 5.7 20.39 9 12.3
F
mm 140 180 110 144 518 229 440
inch 9.2 12.0 14.2 24 29.3 21.2 327
G maximum width
mm 233 306 308 360 610 745 539 767

* Chain container increases headroom

J. D. Neuhaus L. P. Hydraulic Versions


P. O. Box 1155_9 Loveton Circle_Sparks, Maryland 21152 Also Available
410.472.0500_fax: 410.472.2202_800.331.2889_email: info@jdneuhaus.com
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
594 5/3/06 11:30 AM Page 622

588-06

J.D. NEUHAUS L.P.

TROLLEYS
From 6 Ton To 25 Ton Capacity
• Equipped with anti-drop, anti-climb devices
• Fitted with rollers to prevent tilting
• Able to negotiate curves.
Minimum radius 40” (1m)
• Trolley wheels are designed to fit tapered
and parallel beam flanges

Options: Spark resistant package


Plain Geared Motorized Offshore paint
Trolley Trolley Trolley

Plain trolley (LN) pushed or Geared trolley (LH) pulled by the Motorized trolley (LM) powered
pulled by hand reel chain by a pneumatic motor

TECHNICAL DIMENSIONS
Hoist 6 TI 10 TI 16 TI 20 TI 25 TI Dimensions 6 TI 10 TI 16 TI 20 TI 25 TI
Plain Trolley LN 6.3t LN 10-16t LN 20t LN 25t inch 19.68 19.29 23.62 29.53
Type A LN
Geared Trolley LH 6.3t LH 10-16t LH 20t LH 25t mm 500 490 600 750
Motor Trolley LM 6.3t LM 10-16t LM 20t LM 25t inch 19.68 19.29 23.62 29.53
A LH & LM
mm 500 490 600 750
Capacity mt 6.3 10 16 20 25
inch 5.55 5.75 5.08 4.92
lbs 257.4 264 510 975 B max. LN
Trolley weight LN mm 141 146 129 125
kg 117 120 229 443 inch 5.55 5.75
B max. LH & LM
lbs 279.4 286 527 1003 mm 141 146
Trolley weight LH, LM
kg 127 130 239 455 inch b + 2.76 b + 2.68
C LN
lbs 242 343 528 627 1184 mm b + 70 b + 68
Hoist weight, standard lift inch b + 2.76 b + 2.68
kg 110 156 240 285 538 C LH & LM
mm b + 70 b + 68
lbs/ft 2.55 3.89 7.25 inch 5.55 5.75 5.08 4.92
Weight of chain D max. LN
kg/m 3.8 5.8 10.8 mm 141 146 129 125
Number of chain strands # 2 3 4 2 inch 11.57 12.28 12.13 12.13
hoist D max. L & LM
kw 3.5 2.6 6 mm 307 312 308 308
Motor output inch 6.06 7.76 7.83 9.41 16.1
trolley kw 0.2 0.7 E
cfm 142 102.7 194.8 mm 154 197 199 239 409
Air consumption hoist at full load inch 3.11 4.29 5.24 6.14
m3/min 4.0 2.9 5.5 F
mm 79 109 133 156
Air consumption cfm 14.2 46.1 inch 9.17 12.13 15.04 15.35 15.47
at full load G
motor trolley m3/min 0.4 1.3 mm 233 308 382 390 393
Traveling distance geared 30 ft ft 2.46 4.92 inch 9.84 10.51 12.20 14.92 18.74
H
trolley, chain reel off 10 m m 0.75 1.5 mm 250 267 310 379 476
Traveling speed ft/min 29.53/14 16.4/12 39 inch 30.04 37.17 39.25 44.88 60.24
mounted
motor trolley m/min 9/4 5/12 11.9 mm 763 944 997 1140 1530
J min. headroom
inch 36.18 44.53 47.87 58.07 68.7
Minimum radius measured to inch 20 40 59.06 suspended
mm 919 1131 1216 1475 1745
inner edge of the beam mm 0.5 10 1500 inch 7.80 8.56 11.1
inch 2.56 2.95 3.15 K LN
mm 198 217.5 282
Max bottom flange thickness LN, LH, LM
mm 65 75 80 inch 8.46 8.56 11.1
K LH & LM
inch 11.81 12.20 mm 215 217.5 282
Max. bottom flange width b inch 1.57 1.73 2.17 3.03 4.06
mm 300 310 L
mm 40 44 55 77 103
inch 4.92 6.1 7.28 inch 2.01 2.60 3.23 3.39
Min. bottom flange width b M
mm 125 155 185 mm 51 66 82 86

J. D. Neuhaus L. P. Rack & Pinion Drive


P. O. Box 1155_9 Loveton Circle_Sparks, Maryland 21152 Versions Also Available
410.472.0500_fax: 410.472.2202_800.331.2889_email: info@jdneuhaus.com
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
595 5/3/06 11:31 AM Page 623

589-06

J.D. NEUHAUS L.P.

MONORAIL AIR HOISTS EH


From 20 Ton To 100 Ton Capacity,
Air Pressure 85 psi (6 bar)
• Explosionproof
• Low headroom
• Small size relative to capacity
• Little air consumption
• High performance multi-vane motor with self-lubricating features and
positive start-up system for a smooth start and consistent operation
• Trolleys with anti-drop and anti-climb devices
• All-steel, cast iron construction
• Silencer for low noise operation
Options: Spark resistant package, offshore paint,
TECHNICAL Delta-P overload protection
Type EH 10 EH 16 EH 20 EH 25 EH 37.5 EH 50 EH 75 EH 100
Capacity mt 10 16 20 25 37.5 50 75 100
Number of chain strands # 2 3 4 2 3 4 3 4
trolley kw 0.7 1.4 2.8
Motor output
hoist kw 3.5 6 10
ft/min 10.50 6.56 4.59 7.55 5.25 3.61 2.79 2.13
without load
m/min 3.2 2 1.4 2.3 1.6 1.1 0.85 0.65
Lifting speed
ft/min 5.25 3.28 2.30 3.61 2.13 1.64 1.48 1.15
at full load
m/min 1.6 1 0.7 1.1 0.65 0.5 0.45 0.35
ft/min 11.15 6.89 5.25 6.23 4.92 2.95 3.28 2.46
Lowering speed at full load
m/min 3.4 2.1 1.6 1.9 1.5 0.9 1.0 0.75
ft/min 44.29
without load
m/min 13.5
Traveling speed
ft/min 39.37
at full load
m/min 12
cfm 46 92 184
trolley
m3/min 1.3 2.6 5.2
Air consumption
cfm 113.2 141.5 194.6 389.2
hoist
m3/min 3.2 4 5.5 11
Air connection inch G 3/4 G 1-1/2
Weight with lbs 992.08 1267.66 1366.28 2093.49 3195.32 3922.53 8814.68 12560.92
standard lift kg 450 575 620 950 1450 1780 4000 5700
Chain dimension mm 16 x 45 22 x 66 31.5 x 90
lbs/ft 12.78 23.80 46.94
Weight of chain
kg/m 5.8 10.8 21.3
feet 9.84
Standard lift
m 3

DIMENSIONS
Dimensions EH 10 EH 16 EH 20 EH 25 EH 37.5 EH 50 EH 75 EH 100
inch 4.13 5.12 5.75 3.94 4.92 3.94 4.92
A
mm 105 130 146 100 125 100 125
inch 2.76 2.68 2.76 2.68
B
mm 70 68 70 68
inch 10.91 11.30 10.91 11.30 11.50 11.30 11.50
C
mm 277 287 277 287 292 287 292
inch .98 1.38 .98 1.38 1.57 1.38 1.57
D
mm 25 35 25 35 40 35 40
inch 7.80 8.66 7.80 8.66 11.14 8.66 11.14
E
mm 198 220 198 220 283 220 283
inch 27.76 29.53 32.28 39.29 42.13 45.28 58.27 60.43
F* min. headroom
mm 705 820 998 1070 1150 1480 1535
inch 5.43 8.39 7.95 6.69 7.48 16.54 11.26 22.64
G
mm 138 213 202 170 190 420 286 575
inch 1.73 2.09 2.95 3.94 4.72
H
mm 44 53 75 100 120
inch 7.56 7.28 10.47 13.78 17.91 13.39 29.13 18.50
J
mm 192 185 266 350 455 340 740 470
inch 22.83 23.62 46.65 68.11 66.14 126.38 123.23
K
mm 580 600 1185 1730 1680 3210 3130
inch 12.13 14.45 14.84 14.92 18.19 25.20 30
L
mm 308 367 377 379 462 640 762
inch 10.47 12.80 18.70 16.93 22.05 25.79 29.53
M
mm 266 325 475 430 560 655 750
* Chain container increases headroom

J. D. Neuhaus L. P. Hydraulic and Rack & Pinion


P. O. Box 1155_9 Loveton Circle_Sparks, Maryland 21152 Drive Versions Also Available
410.472.0500_fax: 410.472.2202_800.331.2889_email: info@jdneuhaus.com
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
597 5/3/06 11:34 AM Page 642

590-06

J.D. NEUHAUS L.P.

HOISTS & CRANES


LOW HEADROOM TROLLEYS
Capacity Range: 0.5 through 2 metric tons
Features:
• Lower headroom than standard trolleys
• Anti-drop and anti-climb devices
• Trolley wheels are designed to fit either tapered
or parallel flanges
• Hoist and motor trolleys are available with rope or
push-button control.
Options: Rack & pinion drive
Spark-resistant package
Offshore paint
Delta-P overload protection
SUPER-LOW HEADROOM HOISTS
Capacity Range: 3 through 125 metric tons

Features:
• Special load chain guiding system to prevent side plate bending
• Lowest headroom in its capacity range
• Trolleys feature anti-drop and anti-climb device
• High efficiency, multi-vane drives for the hoisting and traveling section
• All-steel and cast iron design for highest performance in harshest
environments
• Explosion-proof
• Positive start-up system to enable a smooth motor operation
Options: Chain container
Offshore paint
Spark-resistant package
Delta-P overload protection

CRANE KITS
Capacity Range: 1 through 16 metric tons
Available in Top Running, Under-Hung, and Jib Models

J. D. Neuhaus L. P.
P. O. Box 1155_9 Loveton Circle_Sparks, Maryland 21152
410.472.0500_fax: 410.472.2202_800.331.2889_email: info@jdneuhaus.com
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
0598-04 5/3/06 11:35 AM Page 768

591-06

AURAND MFG. & EQUIPMENT CO.


DECK SCALERS
Model K7-1
115 v. Model KP5
Model K7-2
230 v.

Model K7-E1
115 v. Model KP5E
Model K7-E2
230 v.

Model M5-1
115 v. Model MP6
Model M5-2
230 v.

Model M5-E1
115 v. Model MP6-E
Model M5-E2
230 v.

Cleaning Power Horse- •Electric tools available in 115 and 230 volt
Model Area Supply Power Weight
models with AC/DC, 50/60 cycle universal
K7-1 115V motors. 15 feet of three-conductor cable included.
1/8 9 lbs.
K7-2 5” Wide 230V
•Pneumatic models feature rotary type air motors,
KP-5 AIR 3/4 6 lbs.
free from toggles, pistons or reciprocating parts
K7-E1 115V to eliminate vibration. Operating Range;
1/8 11 lbs.
K7-E2 8” Wide 230V 70-100 P.S.I/42 C.F.M.
KP5-E AIR 3/4 7.5 lbs.
•Models M5-E1, M5-E2 and MP6-E are furnished with
M5-1 115V a 48-inch detachable aluminum handle allowing one
1/2 21 lbs.
M5-2 8” Wide 230V man to operate the tool with speed and ease over
large flat areas. This handle is available as an option
MP6 AIR 2-1/2 17 lbs.
on Models M5-1, M5-2 & MP6.
M5-E1 115V
1/2 27 lbs.
M5-E2 12” Wide 230V •Vacuum guards (dust /collector/guard) are
available for all models except the models K*-*E.
MP6-E AIR 2-1/2 24 lbs.

MANUFACTURER OF SURFACE-PREPARATION TOOLS — Since 1937


Aurand Mfg. & Equipment Co.
1210 Ellis Street, Cincinnati, OH 45223-1843
Phone: (513) 541-7200 — Fax: (513) 541-3065 — Toll Free: 1-800-860-2872
E-Mail: sales@aurand.net — Web: www.aurand.net
0628-03 5/3/06 11:36 AM Page 628

592-06

PISTON TYPE SCALERS


For Decks & Bulkheads
Available with replaceable Tungsten Carbide tipped heads.
Effectively descale areas of 90 to 500 sq. ft. per hour.

ANTI VIBRATION
CT-16 60 mm

CT-12 45 mm

CT-X 35 mm

MP-2
CT-9 35 mm MP-6
MP-4 Crosshead
pistons only

Specifications MP-2 MP-4 MP-6 MP-8


Working Width 90/100 mm; 4” 230 mm; 9” 125 mm; 5” 300 mm; 12”
Weight w/ bits 7.0 kg; 15 lbs 19.5 kg; 43 lbs 16.8 kg; 37 lbs 47.3 kg; 65 lbs
Air consumption 300 l / min; 10 cfm 600 l / min; 20 cfm 600 l / min; 21 cfm 1415 l / min; 45 cfm
Air pressure 6-8 bars 6-8 bars 6-8 bars 6-8 bars
87-115 psi 87-115 psi 80-110 psi 87-115 psi
Air inlet 3/8” 3/4” 3/4” 3/4”
Blows p/min. 4000 8000 8000 12000

AT-4 PISTOL GRIP ANTI-VIBRATION


TRIPLE HEAD SCABBLER NEEDLE SCALER / POWER CHISEL
fitted with three CT-5 carbide pointed bits
Air consumption 8-3/4 cfm AT-2000-PC
Air pressure 80-110 psi 7 lbs.
AT-2000-N Straight Type AT-2000-C
Weight 12 lbs
AT-2000 (All models)
Working Width 3"
AT-4 No. 2 (Fine) Needle 51 Weight (lbs.) 5-1/2
Air inlet 3/8" No. 3 (Med.) Needles 19 Air Consumption (cfm) 5
Blows p/min. 6000 No. 4 (Coarse) Needles 12 Air Pressure (psi) 80-110
No. 6 (Extra Coarse) Needles 7 Blows per Minute 4850

EXTENDED HANDLE POWER SCRAPERS


with 4" and 8" wide scraper blades available in single length pole or kit

Model EX-2 EX-3 EX-4


Weight (lbs) 9 10 11
Length (ft) 5 5 5
Air cons. (cfm) 5 7-1/2 8-3/4
Air press. (psi) 80-110 80-110 80-110
Blows p/min 4850 3830 2930

We offer A Complete Range


of Deck Scalers, Needle
Scalers & Accessories P.O. BOX 663, ENGLEWOOD, N.J. 07631
(201) 567-8383 • FAX: (201) 567-6055 Your Cleaning Expert
See Our Ad Page www.marindusco.com • sales@marindusco.com

airtec
0629-03 5/3/06 11:37 AM Page 629

593-06

ROTARY SCALERS
Specify air powered or electric RX-2000
WALK BEHIND
Cutters ROTARY DECK
WCT SOLID TUNGSTEN
3.5 CUTTER SCALER
with dust hood
KR8 TUNGSTEN
POINTED (for use with 637
CUTTER scaling wheel)
SR METAL CUTTER
JR-637 ROTARY 2.5 HEAT TREATED
HAND-HELD SCALERS SR 5 METAL CUTTER 110 or 230 volts
A – pneumatic 13 cfm @ 90 psi HEAT TREATED Weight: 80 lbs.
E – electric 110 or 230 volts SR 30 TUNGSTEN
COATED
Weight: 10 lbs. ROLLER
Optional Dust hood.
ROTARY DECK SCALER
FS-1500-E for use with scarifying cutters FS-1500-G
Electric FS-1500 Gas
Power 1.5 KW electric 220/440 Volts
5.5 HP gasoline
Working Width 9"
Overall Width 16"
Height 40"
Weight 150 lbs

DIESEL AND PROPANE POWERED


LARGE AREA DECK SCALERS
Model RM-320 RT-3200 RT-250
Self Propelled Walk Behind Walk Behind
Scaling Width 13" 13" 10"
Performance up to 1200 up to 1000 up to 900
(sq. ft. per hour)
Power 10 HP 9 HP 8 HP
Total Weight 800 lbs 400 lbs 250 lbs
Height 43" 43" 43"
Overall Width 23" 22" 19"
*To specify Diesel or Propane, place a D or P after the model number
Shroud

Combines needle scaling and vacuuming into


NEEDLE SCALER WITH VENTURI Scaler
one self-contained system. Tool consists of a
DUST COLLECTION SYSTEM
needle scaler fitted with a vacuum nozzle,
Venturi vacuum and teflon dust bag. Operates
AVAILABLE WITH MODELS:
from a single air line at normal air pressure –
AT-0 AT-3
descaling and vacuuming debris simultaneously. Venturi
Available with AT series needle scalers. To AT-2 AT-4
order Venturi system, place a “-VEN” after model
number. To order needle scaler with vacuum
Bag
nozzle only, place “-VAC” after model number.

We offer A Complete Range


of Deck Scalers, Needle
P.O. BOX 663, ENGLEWOOD, N.J. 07631
Scalers & Accessories (201) 567-8383 • FAX: (201) 567-6055 Your Cleaning Expert
See Our Ad Page www.marindusco.com • sales@marindusco.com

airtec
Novatek 602-05 5/3/06 11:37 AM Page 1

594-06

NOVATEK CORPORATION
Large Area Deck Scalers
Model TFP200 – Electric or Pneumatic
• Accurate depth control A rotary planer unit suitable for rapidly
• Stable four wheel transport system removing scale, rust, paint and other
• Fully adjustable handle-bar deposits from steel surfaces in preparation
adjusts to each worker’s height for recoating and will quickly produce an
• Built-in hand brake prevents ideal key or grooved profile on concrete.
“runaway” machine Also very efficient at cleaning concrete
• Standard rear vacuum port surfaces.

Standard Cutter Types


Tungsten Carbide Tipped Cutter –
110 V Electric Hardened steel with Tungsten inserts for
320.2002 – 1ph 50Hz (standard) all concrete texturing, scabbling, planing
320.2016 – 1ph 60Hz (non-standard) and grooving applications. Also for
320.2018 – 3ph 60Hz (non-standard) removal of brittle coatings.
Star Cutters – Heat treated steel cutters
220-240 V Electric for the removal of paint coatings. More
320.2004 – 1ph 50Hz (standard) aggressive than beam cutter. Also used
320.2007 – 3ph 50Hz (standard) for removing buildup of grease, dirt and
320.2026 – 1ph 60Hz (non-standard) ice deposits.
Beam Cutter – Heat treated steel cutter Tungsten Carbide Beam Cutter Drum
320.2022 – 3ph 60Hz (non-standard)
for the removal of paint, coatings. Also Tipped Cutter Drum
used for removing buildup of grease, dirt
380-440 V Electric
and ice deposits.
320.2006 – 3ph 50Hz (standard)
320.2024 – 3ph 60Hz (non-standard) Milling Cutter – Tungsten Carbide tipped
cutter for the removal of thermoplastic
road and runway markings, bituminous
Air 320.2012 and rubber deposits.
Wire Brush – For general workshop
cleaning and removal of light surface rust.
Star Cutter Drum Wire Brush Refill

Peening Preparation Tools

A Flap C Flap Star Beam


C Flap – Removal of light paint and rust from steel surfaces (fitted as
necessary)
A Flap – Removal of flaking paint and surface cleaning of concrete
High production tools for the removal of coatings from Star Cutter – Aggressive removal of thick coatings and non-slip
Beam Cutter – Removal of hard coatings including epoxy.
both steel and concrete substrates. Quick change hubs
with an assortment of abrasives enable removal of Model Part No. Cutters Prod./Hr.
or Flaps
everything from mastics and alkyds to epoxy coatings,
rapidly and dust free. With star and beam cutters, can 2" Air with Flaps 194.0205 6 Flaps 17.3m2 (186.3 ft2)
even remove coatings from piping and curved surfaces. 2" Air with Cutters 194.C205 80 Cutters 10.6m2 (113.9 ft2)
These peening preparation tools utilize branded heavy 2" Electric with Flaps 194.0215 6 Flaps 17.3m2 (186.3 ft2)
duty tungsten carbide tipped flaps. 2" Electric with Cutters 194.C215 80 Cutters 7.08m2 (76.2 ft2)
4" Air with Flaps 194.0405 12 Flaps 34.6m2 (372.6 ft2)
4" Air with Cutters 194.C405 164 Cutters 21.2m2 (227.8 ft2)

Phone: (610) 363-7800


Toll Free: 866-563-7800
155 Philips Road
Fax: (610) 363-9620
Exton, PA 19341
www.novatekco.com
Formerly www.trelawnyonline.com
0603-04 5/3/06 11:38 AM Page 1

595-06

NOVATEK CORPORATION
Flexible Shaft Scalers
This scaler will rapidly remove scale, rust, paint and other • 25% lighter than other similar machines
unwanted deposits or buildups while leaving the surface • Ergonomic handle design
ready for priming, • Automatic thermal protection on electric motors
painting or coating • Available with swivel base to avoid tangle of the shaft
applications. It allows • Supplied with: 10 ft. (3m) flexible shaft, heavy duty leaf scaling
operator to reach difficult head, 6 cutter scaling head, 6” diameter power brush, wrench
to reach areas on both set, and hand guard
horizontal and vertical SPECIFICATIONS PART No.
surfaces. In addition to Electric Motor 110 V 50/60 Hz AC 340.TN/S/110
de-scaling decks, 120 V 50/60 Hz AC 340.TN/S/220
hatches, superstructures, Air Motor 1.5 hp 340.TN/S/490
wheelhouses, this Air Consumption 66.0 c.f.m. @90 p.s.i.
machine allows work 31.2 l.p.s. @90 p.s.i.
under piping and around Cutter Speed RPM 3000
many obstructions Shut Off Time 9 seconds
usually inaccessible. Flex Shaft Length/ 10 feet (3m)
Diameter 5/8” (16mm)
Vibration Level 10.1m / s2
Total Weight 75 lbs. (34kg)

Flexible Shafts & Parts Standard Chipping Heads


340.285 340.550 Heavy duty finger head
Extended diameter of fingers 6-3/4"
340.288 340.540 Thin leaf scaling head
340.581 Cone tooth wheel head “6 cutters”
340.290 Outside diameter of head 5"
340.166 Crimped wire brush, complete 340.550
Outside diameter 6"
340.285 Swivel, 10 ft. flexible shaft,
340.160 Standard wire brush head, complete
complete, furnished with a
Outside diameter of brush 6"
dumbell safety swivel handle.
340.167 Braided wire cup brush head, complete
340.288 Inner core for all flexible shafts Outside diameter of brush 6"
340.290 Outer casing for all flexible shafts 340.163 Braided wire brush head
Outside diam. of brush 6" 340.163

340.166 340.167 340.581 340.160 340.540

Long Reach Needle Scalers

Model Part Needle Vibration Air Length


Number Quantity Level Consumption
2 ft. Needle Scaler 137.3200 28 17.3 2.1 lps (4.5 cfm) 860mm (33.9")
4 ft. Needle Scaler 137.3400 28 14.9 2.1 lps (4.5 cfm) 1220mm (48.0")
5 ft. Needle Scaler 137.3500 28 13.6 2.1 lps (4.5 cfm) 1520mm (59.8")
6 ft. Needle Scaler 137.3600 28 15.6 2.1 lps (4.5 cfm) 1830mm (72.0")

Chisel adapter available with 1”, 2”, 4” chisels.

Phone: (610) 363-7800


Toll Free: 866-563-7800
155 Philips Road
Fax: (610) 363-9620
Exton, PA 19341
www.novatekco.com
Formerly www.trelawnyonline.com
0604-04 5/3/06 11:39 AM Page 1

596-06

NOVATEK CORPORATION
NEEDLE SCALERS/CHISEL SCALERS
All tools are equipped with 1/4” NPT air inlet and chisel tip needles.

Needle Scalers

1B 2B 2B/PG 3B 4B
and
3B/PG
Chisel Scalers

1B 2B 2B/PG 3B 4B
and
3B/PG

Blows Air Con- Overall Overall Net Net


Piston per sumption Length Length Weight Weight
Model Number and Style Diameter Stroke Minute (scfm) w/Needles w/Chisel w/Needles w/Chisel
111/1099-1B Needle Scaler .710 1.2 3800 3 13.5” — 3.5 lb. —
114/1299-1B Chisel Scaler .710 1.2 3800 3 — 12.3” — 3.3 lb.
121/2099-2B Needle Scaler .925 1.4 3000 5.5 14.7” — 5.7 lb. —
124/2299-2B Chisel Scaler .925 1.4 3000 5.5 — 13.5” — 4.4 lb.
123/2199-2B/PG Needle Scaler .925 1.4 3000 5.5 12.4” — 5.7 lb. —
125/2399-2B/PG Chisel Scaler .925 1.4 3000 5.5 — 10.2” — 4.4 lb.
131/3099-3B Needle Scaler 1.125 1.54 2200 8 18.3” — 10 lb. —
134/3299-3B Chisel Scaler 1.125 1.54 2200 8 — 16.8” — 7.5 lb.
133/3199-3B/PG Needle Scaler 1.125 1.54 2200 8 13.5” — 8.2 lb. —
135/3399-3B/PG Chisel Scaler 1.125 1.54 2200 8 — 13.4” — 6.6 lb.
135/3395-3B/PG Super Scraper 1.125 1.54 2200 8 — 13.4” — 7.5 lb.
141/4099-4B Needle Scaler 1.3 1.94 2200 8.5 19” — 12.4 lb. —
144/4099-4B Chisel Scaler 1.3 1.94 2200 8.5 — 17.3” — 8.8 lb.

NEEDLE SCALER KITS


1B thru 3B/PG style needle scaler kits packaged complete in a rugged
carrying box and including:
(1) Needle Scaler
(1) Round Front Tube
(1) Extra Anvil
*(1) 2mm Needle Holder
(1) Chisel Holder
(3) Chisels: 3/4” Narrow
2-1/2” Wide
1-3/8” Angle
(1) Allen Key
*(1) Set, 2mm x 7” Flat Needles
Number of Needles in Tool *(1) Set, 3mm x 7” Pointed Needles
(1) Operation & Maintenance Manual
Kit Model No. Tool 2mm 3mm 4mm
110/1099 1B 29 12 — * not included in 4B kit
120/2099 2B 51 19 —
122/2199 2B/PG 51 19 — 4B needle scaler kit includes 4B needle scaler, the above accessories,
130/3099 3B 65 28 19 plus:
132/3199 3B/PG 65 28 19 (1) 3mm Needle Holder
140/4099 4B — 49 35 (1) Set, 3mm x 7” Chisel Tip Needles
(1) Set, 4mm x 7” Pointed Tip Needles

Phone: (610) 363-7800


Toll Free: 866-563-7800
155 Philips Road
Fax: (610) 363-9620
Exton, PA 19341
www.novatekco.com
Formerly www.trelawnyonline.com
0605-04 5/3/06 11:39 AM Page 1

597-06

NOVATEK CORPORATION
ACCESSORIES FOR NEEDLE
SCALERS/CHISEL SCALERS

Triple Head Scaler

CHISELS – CP style 1/2” square shank for all


chisel scalers except 3B/PG/SS super scraper,
which accepts only 5/8” hex shank long reach
style chisels. Single Head Scaler

Part
Number Size and Description SCALING HAMMERS
704/1101 7” O.L., Flat, Narrow 3/4”
All tools are equipped with 3/8” NPT air inlet and cruciform style tips. “SS”
704/1103 7” O.L., Flat, Wide 2-1/2”
versions indicate short handle. “HD” versions indicate heavy duty. All
704/1110 7” O.L., Beryllium Copper Spark
models have 1.06” piston diameter and 1.04” stroke.
Resistant, 2”
704/2105 7” O.L., Angle (Spoon) 1-3/8” Model Blows Overall Air
5/8” Hex Chisels Number per Consumption Net
705.1102 7” O.L., 4” Chisel and Style Minute (scfm) Length Weight
705.1106 7” O.L., 2” Chisel
705.1101 7” O.L., 1” Chisel 151.5199-SH-1 3800 5 18” 5.5 lb.
705.1100 7” O.L., Beryllium Copper Spark 153.5399-SH-3 3000 11 18” 8 lb.
Resistant, 2” 199.5150-SSH-1 3800 5 9” 4 lb.
705.1112 7” O.L., Beryllium Copper Spark 199.5350-SSH-3 3000 11 9” 7 lb.
Resistant, 4” 199.5192-HD SH-1 2500 6.5 18” 8 lb.
199.5392-HD SH-3 2300 14 18” 13 lb.
199.5190-HD SSH-1 2500 6.5 9” 9 lb.
199.5390-HD SSH-3 2300 14 9” 12 lb.

NEEDLES – For Needle Scaler Models 1B, 2B, 3B, and 4B (see facing page) REPLACEABLE HEADS
Standard Duty
Part Part
Number Needle Packs Number Needle Packs Part No. Description
2mm x 7” CARBON STEEL 4mm x 7” CARBON STEEL 426/5351 Cruciform Style with 4
445.2010 100 Needles, Flat Tip 445.4010 100 Needles, Flat Tip Tungsten Carbide Brazed
445.2015 250 Needles, Flat Tip 445.4015 250 Needles, Flat Tip Inserts
445.2020 500 Needles, Flat Tip 445.4025 100 Needles, Chisel Tip 426/5352 Bush Hammer Style with 6
3mm x 7” CARBON STEEL 445.4030 250 Needles, Chisel Tip Tungsten Carbide Brazed
445.3040 100 Needles, Flat Tip 445.4040 100 Needles, Pointed Tip Points
445.3045 250 Needles, Flat Tip 445.4045 250 Needles, Pointed Tip 606/5303 Spark Resistant Beryllium
445.3050 500 Needles, Flat Tip 3mm x 7” BERYLLIUM COPPER Copper Cruciform Style
445.3120 100 Needles, Chisel Tip 445.3080 50 Needles, Flat Tip
445.3125 250 Needles, Chisel Tip 445.3085 100 Needles, Flat Tip Heavy Duty
445.3130 500 Needles, Chisel Tip 445.3090 250 Needles, Flat Tip
445.3135 100 Needles, Pointed Tip 3mm x 7” STAINLESS STEEL Part No. Description
445.3140 250 Needles, Pointed Tip 445.3230 50 Needles, Flat Tip 426/5353 Cruciform Style with 4
445.3145 500 Needles, PointedTip 445.3210 100 Needles, Flat Tip Heavy Duty Tungsten
3mm x 5” CARBON STEEL 445.3220 250 Needles, Flat Tip Carbide Brazed Inserts
445.3025 100 Needles, Flat Tip 426/5356 Bush Hammer Style with 6
445.3030 250 Needles, Flat Tip Also available in
Heavy Duty Tungsten
445.3035 500 Needles, Flat Tip bulk cases of 1,000
Carbide Brazed Points

Phone: (610) 363-7800


155 Philips Road Toll Free: 866-563-7800
Exton, PA 19341 Fax: (610) 363-9620
www.novatekco.com
Formerly www.trelawnyonline.com
606 5/3/06 11:40 AM Page 1

598-06

220 VOLT ELECTRIC TOOLS


Electronic Jig Saw Hot Air Blower – Model 550
Models STP 400 and STS 380A Temperature 300° – 550°C
Cutting depth (up to) 65 mm in soft wood Air flow 270/450 l/min.
55 mm in hard wood Power input 1500 W
3 mm in steel
10 mm in non-ferrous metal Weight 0.6 kg
10 mm in aluminum
No-load stroke rate 450-3200/min.
(Model STP 400)
0-3200/min.
(Model STS 380A)
Height of stroke 19 mm Electronic Percussion Drill – Model SBE 500R
Bevel cuts up to 45°
Drilling capacity up to 15 mm in concrete
Power input 400 W (Model STP 400) 16 mm in stone
380 W (Model STS 380A) 10 mm in steel
Power output 220 W (Model STP 400) 25 mm in wood
210 W (Model STS 380A) No-load speed 1st gear 0-2700 min.
Weight 1.6 kg Percussion rate up to 40,500/min.
Chuck jaws open 1.5-13 mm
Gear neck diameter 43 mm
Power input 500 W
Power output 250 W
Circular Saw – Model HK-66 Weight 1.3 kg

Cutting depth 0-66 mm


Saw blade diameter 190 mm Battery-Operated Screwdriver
No load speed 5000/min. with Electronic Control – Model ABSE 10
Max. bevel angle 45° Drilling diameter 10 mm in steel
Power input 1200 W 15 mm in wood
Power output 775 W 6 mm wood screws
Thread cutting M6
Weight 6 kg
Chuck jaws open 1.5-10 mm
Bit reception 6.35 mm (1/4”)
No load speed 0-300 RPM (1st gear)
0-700 RPM (2nd gear)
Torque 1st stage-Nm 2.2/1.1
2nd stage-Nm 3.2/1.6
Electronic Orbital Sander – Model VSSE 280 3rd stage-Nm 4.4/2.2
4th stage-Nm 11/5.5
Oscillations/no-load 20,000/min. Battery size 7.2 volts
Diam. of oscillation 2.5 mm Weight 1.5 kg
Base plate dimensions 114 x 230 mm
Sanding paper size 115 x 280 mm
Power input 260 W Angle Grinder – Model WSL 125XS
Weight 2.2 kg No-load speed 4,700/min.
Grinding wheel diam. 125 mm
Working spindle thread M 14
Weight 1.7 kg

141 Beard St., Bldg. 15 • Brooklyn, NY 11231


TECHNICO MARINE CORPORATION Tel: (718) 855-3700 • Fax: (718) 855-3754
E-mail: tmcny@aol.com • www.technicomarine.com
We carry a complete line of Houston Office: 7140 Navigation • Houston, TX 77011
Electric Tools Tel: (713) 928-6288 • Fax: (713) 928-6289
3013 5/12/06 2:00 AM Page 1

599-06

NITTO KOHKI U.S.A., INC.

Pneumatic Couplers
HI Series
A general purpose coupler for connecting compressed air supply to pneumatic tools
Plug Socket
PH SH

Specifications
Body material Steel (chrome-plated) Brass Stainless Steel

PM SM 1/8” (10 type), 1/4” (20 type), 3/8” (30 type), 1/2” (40 type),
Size
1/2” (400 type), 3/4” (600 type), 1” (800 type)
Working pressure MPa {kgf/cm2} 1.5 {15} 1.0 {10} 1.5 {15}
Pressure resistance MPa {kgf/cm2} 2.0 {20} 1.5 {15} 2.0 {20}

Packing material, Packing material Symbol Working temp. Remarks


PF SF Working temperature range NBR SG -20ºC – +80ºC Standard material
Fluoro-rubber (FKM) X-100 -20ºC – +180ºC Special Order
NBR=Nitrile butadiene rubber

Hydraulic Couplers
SP Series
Socket and plug both have automatic shut-off valves for medium pressure applications.
Available with various body materials, sizes and packing materials.

Plug Specifications
Body material Brass Stainless steel1, Steel (nickel-plated)
1/6”, 1/4” 1/2”, 3/4” 1-1/4” 1/8”, 1/4” 1/2”, 3/4’ 1-1/4”,
Size 2” 2”
3/8” 1” 1-1/2” 3/8” 1” 1-1/2”
Working pressure MPa {kgf/cm } 5.0 {51} 3.0 {31} 2.0 {20} 1.5 {15}
2
7.5 {76} 4.5 {46} 3.0 {31} 2.0 {20}
Pressure resistance MPa {kgf/cm2} 7.5 {76} 4.5 {46} 3.0 {31} 2.3 {24} 10 {102} 6.5 {66} 4.5 {46} 3.0 {31}
Socket
Packing material Symbol Working temp. Remarks
NBR SG -5ºC – +60ºC Standard material
Packing material,
Working temperature range Fluoro-rubber X-100 -20ºC – +180ºC Standard material
FFKM P 0ºC – +50ºC Semi-standard
EPDM EPT -40ºC – +150ºC Semi-standard
NBR=Nitrile butadiene rubber EPDM=Ethylene propylene rubber FFKM=Perfluoroelastomer
1
Standard stainless steel is SUS303 but SUS304 and SUS316 are also available.

HSP Series
Chrome-molybdenum steel body resists vibration and impact. Low pressure loss suits hydraulic equipment.
Plug Specifications
Body material Special steel (Chrome-molybdenum steel), nickel-plated
Size 1/4”, 3/8”, 1/2”, 3/4”, 1” 1-1/4”, 1-1/2” 2”
Socket Working pressure MPa {kgf/cm2} 20.6 {210} 18.0 {183} 14.0 {142}
Pressure resistance MPa {kgf/cm2} 31 {316} 26.5 {270} 20.6 {210}

Packing material, Packing material Symbol Working temp. Remarks


Working temperature range NBR SG -20ºC – +80ºC Standard material
Fluoro-rubber (FKM) X-100 -20ºC – +180ºC Semi-standard
NBR=Nitrile butadiene rubber

AVAILABLE THROUGH:
WUENSCH SALES CO. (see page 1405)
NITTO KOHKI U.S. A., INC. Tel: 713-921-6419 • Fax: 877-921-3194
E-Mail: sales@wuenschsales.com
Cupla Division® Web: www.wuenschsales.com 200L Line Cupla
200S Line Cupla
3002 5/12/06 2:01 AM Page 642

600-06

NITTO KOHKI U.S.A., INC.


NITTO KOHKI U.S.A., INC.

Air Drills
Special Features
• Ultra high power to weight ratio AD-65B
• Patented noise reduction system
• Ergonomically designed to reduce
operator fatigue AD-100B
• Variable speed control
• Available with keyless chucks Specifications
Model AD-65B AD-100B
• Designed for industrial and
Air Pressure 85 psi
production applications Air Consumption 14.8 CFM 19.8 CFM
Free Speed 2,900 RPM 1,400 RPM
Twist Drill Capacity 1/4” max. 3/8” max.
Dimension 6-7/8” x 6-1/16” 8-11/16” x 6-5/8”
Weight 1.65 lbs. 3.1 lbs.
Horsepower .35 hp .43 hp

Sanders B-30B
Special Features B-20C
• All-around versatility for grinding, sanding and polishing applications
• Grinding arm easily adjusts to operate in any position 0 - 360°
• Rotor and vane assembly designed to deliver maximum power
and performance
• Automatic belt tensioning system
• Adjustable belt tracking Specifications
Model B-10B B-20C B-30B BB-10
• Cast aluminum construction ensures trouble-free
Air Pressure 85 psi
performance and operation
Air Consumption (no load) 14.2 CFM 18.4 CFM 24.0 CFM 8.8 CFM
Motor Free Speed 17,000 RPM 14,000 RPM 16,000 RPM
Belt Speed 3,470 FPM 8,202 FPM 5,906 FPM 3,280 FPM
B-10B Belt Size
Hose Size Requirement
3/8” x 13” 3/4” x 20-1/2” 1-3/16” x 21-1/4”
3/8” ID
3/8” x 13”

BB-10 Dimension
Weight
10-7/16” x 2” 18-1/2” x 11-1/4”
2.0 lbs. 3.1 lbs.
19-5/16” x 4-1/8”
4.8 lbs.
N/A
1.3 lbs.
Special Features
• Compact design (less than 10” in length)
• Reversible sanding belt direction
• Standard third pulley for most edge and curved surface sanding applications
• Designed for right and left hand operator convenience
BB-10
• Ergonomically created for maximum operator comfort and control

Orbital Sanders – Models available with either 5” or 6” diameter pads


Specifications
Model APS-125 APS-150 OSV-50A OSV-60A
Air Pressure 85 psi
Air Consumption 15.9 CFM 24.1 CFM
Motor Free Speed 10,000 RPM 8,500 RPM
Orbit Diameter 3/16” 3/8”
Paper Size 5” dia. 6” dia. 5” dia. 6” dia.
Weight 1.52 lbs. 1.59 lbs. 4.2 lbs. 4.4 lbs.
Pad PSA
APS-125/150 Horsepower .37 hp .75 hp
OSV-50A
OSV-60A

AVAILABLE THROUGH:
WUENSCH SALES CO. (see page 1405)
NITTO KOHKI U.S. A., INC.
HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
Nitto Kohki 3012 5/12/06 2:01 AM Page 642

601-06

NITTO KOHKI U.S.A., INC.


Angle Grinders
Heavy duty grinders for tough applications

MAG-45/50 MAGW-40
MAG-25B

Special Features
• Suitable for various grinding applications
• Locking throttle lever helps prevent accidental start-up

Specifications
Model MAG-25B MAGW-40 MAG-45 MAG-50 MAG-70
MAG-70 Air Pressure 85 psi
Air Consumption (no load) 14.1 CFM 24.1 CFM 30.7 CFM 23.7 CFM
Air Consumption (load) 40.6 CFM
Free Speed 22,000 RPM 13,000 RPM 12,000 RPM 7,100 RPM
Hose Size Requirement 3/8” ID 1/2” ID
Dimension 5” x 2-9/16” 7-5/16” x 3-3/4” 10” x 3-3/8” 11-7/8” x 3-29/32”
Weight 1.2 lbs. 3.3 lbs. 4.85 lbs. 7.5 lbs.
Wheel Diameter 2-1/4” 4” 4-1/2” max 5” max 7” max
Spindle Size 3/8” OD 5/8” OD 5/8”-11 threaded 7/8” OD
Horsepower 1/4 hp 3/4 hp 1 hp 1-1/2 hp
Optional Accessories N/A 5/8-11 spindle

Sanders
Special Features
• Designed for sanding and/or polishing metal, aluminum,
wood, plastic and many other materials
• Side exhaust with noise reduction system Specifications
• Insulated handle for operator convenience and comfort
Model MAS-20B MAS-40
Air Pressure 85 psi
Air Consumption (no load) 14.1 CFM 15.9 CFM
Free Speed 22,000 RPM 13,000 RPM
Standard with Abrasive Pad 2” diameter 4” diameter
Hose Size Requirement 3/8” ID
Dimension 5” x 4” 7.1” x 3.2”
MAS-20B MAS-40 Weight 1.1 lbs. 2.0 lbs.
Horsepower .27 hp .45 hp

Die Grinders
Special Features
• Can be used for most deburring, finishing and grinding applications
• Precision machined with heavy duty spindle and support bearings Specifications
• Rear exhaust with patented noise reduction system Model L-25B L-35C AL-55
• Suitable for industrial and production applications Air Pressure 85 psi
Air Consumption (no load) 14.1 CFM 12.4 CFM 6 CFM
• Locking throttle lever helps prevent accidental start-up
Free Speed 27,000 RPM 37,500 RPM 56,500 RPM
• Accepts most stone-type and rotary carbide burrs with 1/4” shanks
Size of Collet Chuck 1/4” 1/8”
Hose Size Requirement 3/8” ID 1/4”
L-25B L-35C AL-55 Dimension 5-11/32” 6-23/32” 5-1/16”
Weight (w/o hose) 1.3 lbs. 1.0 lbs. .55 lbs.

AVAILABLE THROUGH:
WUENSCH SALES CO. (see page 1405)
HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
NITTO KOHKI U.S. A., INC.
E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
607 5/3/06 9:19 PM Page 1

602-06

SPILLPRO
PNEUMATIC VACUUM
Capacity: 13 U.S. gallons (approx. 49 liters)
Overall Height: 47” (120 cm)
Wand Length: Standard 42” (107 cm)
Weight: 35 lbs (16 kg) empty
Suction: Draws at 12” (30 cm) of mercury
Materials: Polished aluminum cylinder with galvanized fittings
and brass valves
Power: Air at 90 psi (6.21 bar): 30 cfm (849.5 l/m)
Suction Hose: 7’ (2.13 m) standard -- static and corrosive free
Disposal Hose: 5’ (1.5 m) standard -- static and corrosive free
1.25” (3 cm) diameter
Fill Time: 37 seconds (water)
Discharge Time: 27 seconds (water)
The products above and below this line are not available from the same manufacturing source.

AIR POWERED RECIPROCATING SAW


Makes a smooth burrless cut, even in tight corners.
Cutting speed adjustable downward from 1200 strokes per minute.
Tool cannot be damaged by stalling.
Safe for use in hazardous areas where electrical tools may present
a problem.
Self-lubricating system oils all moving parts, including the blade.
Complies with OSHA standards.

ACCESSORIES
Cutting Blades Shipped in steel
carrying case with
For Metal
black enamel finish
Super Speed, High Speed Hacksaw
Blades: 12” x 1/2” x .025 (18-1/4” x 7-1/2” x 2”).
Type 38, all hard: 14, 18, 24 or 32 TPI Shipping wt: 12 lbs.
Type 38F, flexible: 14, 18, 24 or 32 TPI
Sculpture Blade:
All hard, 6” x 1/4” x .025, 18 TPI
For Other Materials (Wood, PVC Pipe, Asbestos, etc.)
All Purpose Blade has 10 TPI and makes a 10-1/2” cut.

Master Speed Red Oil


Blended for use with portable hacksaw and other
air tools. Dyed red for easy visual check of oil
content. Available in a six-pack of 8 oz. cans, or
in pints, quarts or gallons.

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0609-04 5/3/06 9:20 PM Page 637

603-06

IMPACT TOOLS

★ 1702SB1 ♦ 2925B2 ▲ 599A1 ● 8055


Pneumatic Models
Drive Free Impacts Maximum Recomm. Wt. Length Side to Size Hose
Model Description Handle Speed per Torque Torque Range less socket less socket Center Dist. Recomm. CFM
R.P.M. minute ft.-lb. Nm ft.-lb. Nm lb. kg. in. mm in. mm in. mm
2902P1 3
⁄8″ square Pistol 10,000 1500 140 190 20-120 27-163 2 1⁄2 1.25
. 51⁄2 140 13⁄8 35
.
5
⁄16 8 15
2903P2 3
⁄8″ square Pistol 6000 1200 205 278 30-170 41-230 4 13⁄16 2.18
. 55⁄8 143 13⁄8 35 3
⁄8 10 21
2904P1 3
⁄8″ square Pistol 14,500 1500 230 313 25-200 34-270 2.65 1.20 53⁄4 146 11⁄8 29 3
⁄8 10 18
Reverse Bias 260 354
2904P4 1
⁄4″ hex QC Pistol 14,500 1500 260 354 25-200 34-270 2.65 1.20 53⁄4 146 11⁄8 29 3
⁄8 10 18
Reverse Bias
★ 1702SB1 3
⁄8″ square Straight 10,000 1500 105 142 13-85 18-115 2 ⁄2
.
1
1.12 5 ⁄8
7
149 1 25 ⁄16
5
8 13
2906P1 1
⁄2″ square Pistol 5000 1200 500 678 40-350 54.2-475 6 2.72 67⁄8 175 111⁄32 34 3
⁄8 10 23
2903P1 1
⁄2″ square Pistol 6000 1200 220 298 30-185 41-250 4 13⁄16
. 2.18 55⁄8 143 13⁄8 35 3
⁄8 10 21
2925P1 3
⁄4″ square Pistol 5200 1050 1450 1972 350-1100 476-1496 11 7⁄8
. 5.39 87⁄8 225 13⁄4 44 1
⁄2 13 60
2925P3 1″ square Pistol 5200 1050 1450 1972 350-1100 476-1496 11 7⁄8
. 5.39 87⁄8 225 13⁄4 44 1
⁄2 13 60
2925RBP1 3
⁄4″ square Pistol 5200 1050 1600 R 2176 400-1400 544-1904 11 7⁄8
. 5.39 87⁄8 225 13⁄4 44 1
⁄2 13 60
Reverse Bias 1300 F 1768 300-950 408-1292
♦ 2925B2 1″ square Grip 6500 900 1600 2170 350-1400 475-1904 14 6.35 123⁄8 314 15⁄8 41 11⁄2 13 60
I.T.
2925RB2 1″ square Grip 6500 900 1700 2305 F300-1300 407-1763 14 6.35 123⁄8 314 15⁄8 41 11⁄2 13 60
Reverse Bias I.T. 1500 2034 R400-1500 544-2034
2925A2 1″ square Grip 6500 900 1600 2170 350-1400 475-1904 14 6.35 12 ⁄8
3
314 1 ⁄85
41 1 ⁄21
13 60
O.T.
2925RA2 1″ square Grip 6500 900 1700 2305 F300-1300 407-1763 14 6.35 123⁄8 314 15⁄8 41 11⁄2 13 60
Reverse Bias O.T. 1500 2034 R400-1500 544-1904
2925RBP3 1″ square Pistol 5200 1050 1600 R 2176 400-1400 544-1904 11 7⁄8
. 5.39 87⁄8 225 13⁄4 44 1
⁄2 13 60
Reverse Bias 1300 F 1768 300-950 408-1292
2920B1 3
⁄4″ square Grip 5000 950 1100 1495 250-800 339-1085 13 ⁄16 5.98
.
3
12 ⁄2
1
318 1 ⁄32 49
29 1
⁄2 13 36
2920B3 1″ square Grip 5000 950 1100 1495 250-800 339-1085 13 3⁄16 5.98
. 121⁄2 318 129⁄32 49 1
⁄2 13 36
2920B9 3
⁄4″ sq. at 90° Grip 5000 950 550 949 125-400 203-678 23 11⁄16 10.75
. 171⁄2 445 15⁄16 33 1
⁄2 13 36
2908P2 3
⁄4″ square Pistol 6000 1050 750 1017 100-450 136-610 8 11⁄16 3.94
. 711⁄16 195 15⁄8 41 1
⁄2 13 31
2908P1 5/8” square Pistol 6000 1050 750 1017 100-450 136-610 8 1⁄2 3.86
. 711⁄16 195 15⁄8 41 1
⁄2 13 31
2934A2 1″ square Grip O.T. 6600 750 1500 2030 500-1100 678-1490 18 1⁄2 8.39
. 111⁄4 286 23⁄16 56 3
⁄4 19 47
2934B1 No. 5 spline Grip I.T. 6600 750 1500 2030 500-1100 678-1490 18 1⁄2 8.39
. 111⁄4 286 23⁄16 56 3
⁄4 19 47
2934B2 1″ square Grip I.T. 6600 750 1500 2030 500-1100 678-1490 18 1⁄2 8.39
. 111⁄4 286 23⁄16 56 3
⁄4 19 47
2934B9 1″ sq. at 90° Grip I.T. 5300 780 750 1624 250-500 678-1355 35 3⁄4 16.2
. 185⁄8 473 15⁄8 41 3
⁄4 19 47
2934P2 1″ square Pistol 5300 825 1500 2030 500-1100 678-1490 20 9.07 85⁄8 219 23⁄16 56 3
⁄4 19 47
2940A1 No. 5 spline Grip O.T. 5000 850 2000 2710 1000-1600 1360-2170 22 9.98 121⁄4 311 2 ⁄16 56
3 3
⁄4 19 58
2940A2 1″ square Grip O.T. 5000 850 2000 2710 1000-1600 1360-2170 22 9.98 121⁄4 311 23⁄16 56 3
⁄4 19 58
2940B1 No. 5 spline Grip I.T. 5000 850 2000 2710 1000-1600 1360-2170 22 9.98 121⁄4 311 23⁄16 56 3
⁄4 19 58
2940B2 1″ square Grip I.T. 5000 850 2000 2710 1000-1600 1360-2170 22 9.98 121⁄4 311 23⁄16 56 3
⁄4 19 58
2940P2 1″ square Pistol 4000 810 2000 2710 1000-1600 1360-2170 22 7⁄8 10.4
. 97⁄8 251 23⁄16 56 3
⁄4 19 58
2945A7 11⁄2″ square Grip O.T. 4000 650 2400 3264 1400-1800 1900-2440 30 13.6 133⁄4 349 21⁄2 64 3
⁄4 19 65
2945B1 No. 5 spline Grip I.T. 4000 650 2400 3264 1400-1800 1900-2440 30 13.6 133⁄4 349 21⁄2 64 3
⁄4 19 65
2945B7 11⁄2″ square Grip I.T. 4000 650 2400 3264 1400-1800 1900-2440 30 13.6 133⁄4 349 2 ⁄2
1
64 3
⁄4 19 65
2950A7 11⁄2″ square Grip O.T. 3750 650 3000 4080 1600-2500 2170-3390 32 5⁄8 14.8
. 141⁄2 368 2 ⁄2
1
64 3
⁄4 19 70
2950B1 No.5 spline Grip I.T. 3750 650 3000 4080 1600-2500 2170-3390 32 5⁄8 14.8
. 141⁄2 368 21⁄2 64 3
⁄4 19 70
2950B7 11⁄2″ square Grip I.T. 3750 650 3000 4080 1600-2500 2170-3390 32 5⁄8 14.8
. 141⁄2 368 21⁄2 64 3
⁄4 19 70
5980A1 11⁄2″ square Lever 830 1000 10,000 13,560 2300-5500 3119-7460 88 39.9 23 584 31⁄16 78 1 25 138
5982A1 21⁄2″ square Lever 830 850 20,000 27,120 4000-10,000 5424-13,560 120 54.5 253⁄8 645 31⁄2 89 1 25 130
588A1 2 ⁄2″ square
1
Lever 355 550 50,000 67,800 12,000-25,000 16,270-33,900 215 97.5 265⁄8 676 4 101 1 25 155
▲ 599A1 3 ⁄2″ square
1
Lever 295 500 80,000 108,500 26,000-42,000 35,250-57,000 599 272 371⁄2 952 6 ⁄4 171
3
11⁄2 38 375

Electric Models
Drive Free Impacts Maximum Recomm. Wt. Length Side to
Model Description Handle Speed per Torque Torque Range less socket Center Dist. Cord
R.P.M. minute ft.-lb. Nm ft.-lb. Nm lb. in. in. amps volts Length
8005 3
⁄8″ square Pistol 2000 2200 85 115 5-50 7-68 4 1⁄2 10 1⁄8
. . 1 3⁄8 .3.0 120AC 10′
8049 1
⁄2″ square Pistol 1900 2000 290 393 30-180 41-244 6 ⁄4 11 ⁄16
3
.
11
. 1 ⁄8
5
.5.0 120AC 10′
8053 1
⁄2″ square Pistol 1900 1900 330 448 50-225 68-305 7 10 ⁄4
1
. 1 ⁄8
5
.5.0 120AC/DC 15′
8053QC 7
⁄16″ hex QC Pistol 1900 1900 300 407 50-200 68-272 7 11 1 5⁄8 .5.0 120AC/DC 15′
● 8055 3
⁄4″ square Pistol 1700 1725 450 610 100-375 136-509 10 11 7⁄8
. 1 3⁄4 .7.5 120AC/DC 8′
8062 5
⁄8″ hex QC Pistol 1700 1725 400 542 100-350 136-475 10 12 7⁄8
. 1 3⁄4 .7.5 120AC/DC 8′

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
0612-04 5/16/06 1:56 PM Page 640

604-06

SHOP-VAC CORPORATION

Industrial Wet/Dry Vacs


962 Series Industrial Multipurpose Wet/Dry Vacs
• 2.5 HP two-stage motor Accessories for 962-38 & 962-39 Accessories for 962-46, 47, 49 Filters for 962 series
• Stainless steel, epoxy-coated
steel,or poly tank compositions
• 18' cord
• Tool storage and tank drain
(962-38 & 962-39 models only)

962-38

Tank size & Wet Dry S.P. (Inches H.P. C.F.M. Cord Electrical Unit Shipping Package
Model composition capacity capacity of Water) (peak) (2.5” orifice) length rating dimensions weight dimensions
9623810 12 gal. poly 10 gal. 11 gal. 88” 2.5 100 18’ 120V 60 Hz 9.0 amps 18.5” x 19.5” x 27” 28 lbs. 17.5” x 17.5” x 28”
9623910 16 gal. poly 13.25 gal. 15 gal. 88” 2.5 100 18’ 120V 60 Hz 9.0 amps 19.5” x 22.5” x 29.5” 31 lbs. 18.75” x 18.75” x 29.5”
9624610 10 gal. steel 8 gal. 9 gal. 88” 2.5 100 18’ 120V 60 Hz 9.0 amps 19.5” x 20.5” x 34” 44 lbs. 15.875” x 15.875” x 31.5”
9624710 10 gal. stainless 8 gal. 9 gal. 88” 2.5 100 18’ 120V 60 Hz 9.0 amps 19.5” x 20.5” x 34” 44 lbs. 15.875” x 15.875” x 31.5”
9624910 20 gal. stainless 18.25 gal. 19 gal. 88” 2.5 100 18’ 120V 60 Hz 9.0 amps 19.75” x 21” x 39” 55 lbs. 18.75” x 18.75” x 34.5”

850 Series Industrial Economy Wet/Dry Vacs


• 4.5 HP motor Accessories for 850 series Filters for 850 series
• Heavy-duty plastic tools in both
1.25" and 2.5" diameter sizes
• Rust resistant, epoxy-coated
steel tanks
• 18' cord

850-02

Tank size & Wet Dry S.P. (Inches H.P. C.F.M. Cord Electrical Unit Shipping Package
Model composition capacity capacity of Water) (peak) (2.5” orifice) length rating dimensions weight dimensions
8500110 6 gal. steel 4 gal. 5 gal. 60” 4.5 165 18’ 120V 60 Hz 10.0 amps 13” x 13” x 23.25” 20 lbs. 17” x 17” x 23”
8500210 10 gal. steel 8 gal. 9 gal. 60” 4.5 165 18’ 120V 60 Hz 10.0 amps 15.5” x 15.5” x 26.5” 26 lbs. 15.875” x 15.875” x 26”

970 Series Industrial Heavy-Duty Wet/Dry Vacs


• 3.0 HP two-stage Accessories for 970, 02, 04 Accessories for 970-05 & 970-06 Filters for 970-01, 02, 03, 04 Filters for 970-05, 06
motor
• Stainless steel or
epoxy-coated
steel tank
compositions
• 18' cord
• Tough metal
accessories
970-03

Tank size & Wet Dry S.P. (Inches H.P. C.F.M. Cord Electrical Unit Shipping Package
Model composition capacity capacity of Water) (peak) (2.5” orifice) length rating dimensions weight dimensions
9700210 10 gal. stainless 8 gal. 7.5 gal. 100” 3.0 105 18’ 120V 60 Hz 11.0 amps 19” x 24.5” x 36.5” 51 lbs. 15.875” x 15.875” x 28”
9700410 20 gal. stainless 18.25 gal. 17.25 gal. 100” 3.0 105 18’ 120V 60 Hz 11.0 amps 21” x 25.75” x 38.5” 62 lbs. 18.75” x 18.75” x 36.5”
9700510 55 gal. steel drum 49.25 gal. 55 gal. 100” 3.0 105 18’ 120V 60 Hz 11.0 amps 24” x 24” x 43” 79 lbs. 25.875” x 25.875” x 55”
9700610 55 gal. head assembly – – 100” 3.0 105 18’ 120V 60 Hz 11.0 amps 23” x 23” x 14” 26 lbs. 25.25” x 25.25” x 18.5”

Shop•Vac® Industrial Wet/Dry Vacs


2323 Reach Road • Williamsport, PA 17701
Tel: 570-326-0502 • Fax: 570-326-7185
E-mail: senglander@shopvac.com • www.shopvac.com
0613-04 5/3/06 9:23 PM Page 1

605-06

SHOP-VAC CORPORATION

Industrial Wet/Dry Vacs


610 Series Contractor Duty Wet/Dry Vacs
• 2.0 HP two-stage motor Accessories for 610 series Filters for 610 series

• Poly or stainless steel tanks


• 18' cord
• Heavy-duty tools

6101610

Tank size & Wet Dry S.P. (Inches H.P. C.F.M. Cord Electrical Unit Shipping Package
Model composition capacity capacity of Water) (peak) (2.5" orifice) length rating dimensions weight dimensions
6101210 12 gal. poly 10 gal. 11 gal. 80" 2.0 100 18' 120V 60 Hz 8.5 amps 18.5" x 18.5" x 24.5" 25 lbs. 16.125" x 16.125" x 28"
6101610 16 gal. poly 13.25 gal. 15 gal. 80" 2.0 100 18' 120V 60 Hz 8.5 amps 19.25" x 19.25" x 25.25" 27 lbs. 18.25" x 18.25" x 28.125"
6105010 10 gal. stainless 8 gal. 9 gal. 80" 2.0 100 18' 120V 60 Hz 8.5 amps 18" x 19" x 35.5" 31 lbs. 15.875" x 15.875" x 26"

Accessories for 960 series

Industrial Wet/Dry Pump Vacs


• 6.5 HP motor • Self-priming pump
• Poly or stainless steel tanks • Capable of pumping water to heights of 50'
• Pump-out feature • Heavy-duty tools in both 1.25" and 2.5" diameter
sizes
• Hooks up to any standard garden hose

Tank size & Wet Dry S.P. (Inches C.F.M. Cord Electrical Shipping Package
Model composition capacity capacity of Water) (2.5" orifice) length rating weight dimensions
9609710 18 gal. poly 12.5 gal. 16.75 gal. 58" 200 18' 120V 60 Hz 12.0 amps 35 lbs. 19.625"x 19.625"x 29.75"
9609810 22 gal. poly 16.5 gal. 20.75 gal. 58" 200 18' 120V 60 Hz 12.0 amps 36 lbs. 19.625"x 19.625"x 29.75"
9609810 9609910 10 gal. stainless 6.3 gal. 9.4 gal. 58" 200 18' 120V 60 Hz 12.0 amps 38 lbs. 17.125" x 17.125" x 32.5"

Power Tool Triggered Wet/Dry Vac


• 6.0 HP motor Accessories for 925-63 Filters for 925-63
• Tool and cord storage
• 18' cord
• Attach virtually any power tool with
universal tool adapter
• Heavy-duty tools

Tank size & Wet Dry S.P. (Inches H.P. C.F.M. Cord Electrical Unit Shipping Package
Model composition capacity capacity of Water) (peak) (2.5" orifice) length rating dimensions weight dimensions
9256310 12 gal. poly 10 gal. 11 gal. 60" 6.0 175 18' 120V 60 Hz 10 amps 18.5" x 19.5" x 27" 26 lbs. 16.125" x 16.125" x 28"
12 amps total tool load

High Efficiency Filter Bags High Quality Cartridge Filter


• For fine dusts and
powders • For wet and dry pickup.
• No blow-through.
• High-efficiency,
2-ply design
• 95% efficient at
906-71 906-72 906-73
0.1 microns Fits 5-8 gallon vacs Fits 10-14 gallon vacs Fits 15-25 gallon vacs
• Single-use disposable (2 pk.) (2 pk.) (2 pk.) 903-04
collection filter bag

?? ?
Having trouble finding THE PRODUCTS

??? ON THIS PAGE? We can help!


E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
614 5/3/06 9:24 PM Page 642

606-06

ASHLAND SPECIALTY CHEMICAL, DREW MARINE

PLASMA CUTTING EQUIPMENT


TM
The AMERARC XL PLUS Series Air/Nitrogen Plasma Cutting Systems are 75XL PLUS Plasma Cutting System
based on inverter technology and provide a high degree of reliability and low
weight for portability. Two models are available, rated for cutting 20 and 25mm
thick material under all conditions and 25 and 30mm under specific conditions
(lower speed).

These machines can be used to cut any metal that is electrically conductive. All
steels, stainless steels, cast irons, aluminum, and copper alloys can be cut
easily, quickly and cleanly. The combined effect of a high intensity arc and a hot,
high velocity plasma gas results in a very clean, high speed cut.

XL PLUS Features
• Ergometric Output - For rated cutting thickness at higher speeds.
• Torch Design:
• Torch Leads - Enclosed in a one-piece, heavy-duty flexible cable.
This provides durability and handling ease.
• Operator Friendly Handle - For ease and comfort, including trigger latch.
• Standards approval - Canadian Standards approval; certified to
comply with standard CSA 22.2, No. 60.
• Tip Saver Circuit - Consumable parts last longer.
• Smart Start1 (Auto Pilot) - Minimizes machine recyling, restarts quickly. NOTE: Initial shipments of the plasma
cutting systems include the standard
• Smart Logic1 (Over Voltage Protection) - Will not power on unless correct input. kit of consumable parts, plus a “Sea
• Universal Input Power - Versatile - simple change, with proper cable and plug Stock” of parts for the special needs of
units can be used with 208-460, 1/3 phase, 50/60 Hz. ships stores.
• IP-23C Protection Certified (Water Spray Test) - rugged and durable.
• Torch Leads: 6.1M/15.2M - see facing page
1
Registered trademark of Thermadyne, St. Louis, Missouri

How To Order
Plasma Cutting Systems
Description 75XL PLUS 100XL PLUS

With 6.1M Torch & Leads Assembly PCN 933110 PCN 980111
Cutting Capacity:
High quality cutting and gouging 20 mm 25 mm
Severance Cutting 25 mm 30 mm
Output Current, continuously variable 15-60 amps 15-80 amps
Pilot: CD Start/Pulsed DC CD Start/Pulsed DC
Duty Cycle 100% @ 50A 100% @ 60A
Plasma Gas Air/Nitrogen Air/Nitrogen
Gas Pressure 4.5 bar (60 psig) 4.8 bar (70 psig)
Gas Flow 142 lpm (300 scfh) 190 lpm (400 scfh)
Height 406 mm (16 in) 406 mm (16 in)
Width 330 mm (13 in) 330 mm (13 in)
Length 630 mm (24 in) 630 mm (24 in)
Weight 32 kg (71 lbs) 35 kg (75 lbs)

Ashland Specialty Chemical


Drew Marine
One Drew Plaza
Boonton, NJ 07005 USA
Drew Marine Telephone: (973) 263-7600
FAX: (973) 263-7463/4491
Registered trademark, TMTrademark, Ashland.
® Web Site: www.drew-marine.com
E-Mail: drewmarine@ashland.com
Ashland Specialty 615 5/3/06 9:27 PM Page 1

607-06

ASHLAND SPECIALTY CHEMICAL, DREW MARINE


PLASMA CUTTING EQUIPMENT - continued
PCH-102 TORCH - Electrode Locking Mechanism
The new electrode is easy to install, no tools are required.

Torch Package - 6.1 meter length PCN 931049


Torch Package - 15.2 meter length PCN 931064

ADAPTER KITS

Adapter kits for the Model PCH-102 Torch are available to convert many cutting systems to
the new torch design.

Contents of Consumable Kits


S T A N D A R D Standard Kit for PCH-102 Torch
PARTS 75XL PLUS 100XL PLUS
Electrode, Maximum Life 5 5
Gas Distributor 0 0
Shield Cup 0 0
Shield Cup Castle (Crown) 0 0
Coil Spring 1 1
O-Ring 1 1
Tip - 40 Amp 2 2
Tip - 60 Amp 5 0
Tip - 80 Amp 0 5
Standoff Cutting Guide 1 1
Lubricant 1 1
S E A S T O C K
PARTS 75XL PLUS 100XL PLUS
Electrode, Maximum Life 20 20
Sea Stock Kit for PCH-102 Torch
Gas Distributor 2 2
Shield Cup 1 1
Shield Cup Castle (Crown) 1 1
Coil Spring 3 3
O-Ring 5 5
Tip - 40 Amp 10 10
Tip - 60 Amp 40 0
Tip - 80 Amp 0 40
Standoff Cutting Guide 1 1

PARTS KITS
SEA STOCK STANDARD
MODEL PCN PCN
75XL PLUS 992033 930041
100XL PLUS 980129 930058

INPUT POWER: AMPS


208 - 460 VAC (+ 10%), 1/3 Phase, 50/60 Hz

Voltage 75XL PLUS 100XL PLUS


230 35/17A, 1-phase 75/37A, 1-phase
380 36.5/18.9, 1/3-phase 55.9/29, 1/3-phase
460 20/10 A, 3-phase 43/21 A, 3-phase
Ashland Specialty Chemical
Drew Marine
One Drew Plaza
Boonton, NJ 07005 USA
Drew Marine Telephone: (973) 263-7600
FAX: (973) 263-7463/4491
®
Registered trademark, Ashland. Web Site: www.drew-marine.com
E-Mail: drewmarine@ashland.com
616 5/3/06 9:28 PM Page 642

608-06

ASHLAND SPECIALTY CHEMICAL, DREW MARINE

INVERTER ARC WELDING MACHINES


AMERARC™ I-400 MST Inverter Arc Welding Machine
Description
The AMERARC I-400 MST arc welding machine is a 400-amp inverter with 400 amps output at 25%
duty cycle. The MST model is ideal for use in welding with all the major shipboard welding
processes: Gas Metal Arc Welding (GMAW-MIG), using the short arc technique with 0.9mm solid
wire (.035”), or the spray arc technique with 1.3 mm (.052”) wire; Fluxcored Arc Welding (FCAW)
with cored wires up to 2.4mm (3/32”); GTAW (TIG) welding, LIFT or SCRATCH start with current as
low as 5 amps; SMAW (STICK) electrode welding for all types and electrode sizes; and, CAC-A,
Carbon Arc Gouging with rods up to 9mm (3/8”).

Handling is easy because the machine weighs only 64 pounds (29kg). Smart Link1 automatic
voltage linking provides protection for the machine in the event it is connected to the wrong voltage.
Two machines can be paralleled to produce 800 amps at 25% duty cycle.

The AMERARC l-400 MST welder provides both 24-volt and 115-volt AC (with circuit breakers) to
power MIG wire feeder through its 14-pin receptable (19-pin also present). Additional options for the
welder include TIG pulser, TIG sloper and a selection of remote controls. The AMERARC I-400 MST
welder comes complete with volt/ammeter and two male DIN-style connectors, and 4-conductor
primary cable. The machine also includes a voltage reduction device (VRD). A VRD reduces open
circuit voltage when the arc welding machine is not in use.

Gas Metal Arc (MIG) Welding


The AMERARC I-400 MST model has all the features and benefits of constant voltage output, necessary for quality MIG welding. The MIG F4
feeder and 400-amp gun used with the machine complete the MIG welding package.

A digital meter for wire feed speed and voltage, a three-meter, four-conductor primary cable and instruction manual are supplied with all models.

Features
• Digital meter for voltage and amperage
• Multi-Process Output: Constant Current (CC)/Constant Voltage (CV) and CC/LIFT TIG
• Crisp short and smooth spray arc in CV (Constant Voltage) mode
• Excellent for SMAW in CC (Constant Current) mode
• Arc Control for CC and Inductance Control for CV modes
• Heavy duty output for arc gouging in CC and CV modes
• Lightweight and portable, with carrying handle
• Built to NEMA, CSA, IEC 974, and IP23S water spray test
• Smart Link automatic input voltage linking - Prevents damage if connected to wrong voltage
• Single Output Range: 5-400 A. CC/CV
10-36 V. CC/CV
• 14-pin connector for remote control and power for wire feeder (GMAW)

Approvals
1EC974-1, IP23S

Technical Specifications

Rated Output Duty Cycle-% Output Range Load Characteristics


Amps 400A 25%@400A 5-400A Input 400A 300A
Volts 44V 60%@300A 10-36V 50/60 Hz 36V 32V Load
230V 3 phase 55 A 37 A 1.3 A
460V 3 phase 27 A 18 A 0.6 A
Dimensions KW 16.9 KW 11.3 KW 0.3 KW
Metric English KVA 22.6 KVA 15.1 KVA 0.5 KVA
Width: 210mm 8.3 in.
Length: 450mm 17.7 in.
Height: 420mm 16.5 in.
Weight: 27kg 59.5 lb.
1Registered trademark of Thermal Dynamics Corp.
How to Order: 230/460 volt, 1/3 phase 50/60 Hz Product Code Number: 600123

Ashland Specialty Chemical


Drew Marine
One Drew Plaza
Boonton, NJ 07005 USA
Drew Marine Telephone: (973) 263-7600
FAX: (973) 263-7463/4491
Registered trademark, TMTrademark, Ashland.
® Web Site: www.drew-marine.com
E-Mail: drewmarine@ashland.com
617 5/3/06 9:29 PM Page 645

609-06

ASHLAND SPECIALTY CHEMICAL, DREW MARINE

INVERTER ARC WELDING MACHINES


AMERARCTM I-140 Inverter Arc Welding Machine
Description
The I-140 inverter arc welding machine is a constant
current arc welding rectifier providing 140 amps welding
current at 35% duty cycle, 100 amps at 100%. Open
circuit voltage is 48 volts. The I-140 arc welding machine
can be connected to any 220-240 volt, single-phase,
50/60 Hz supply providing 20 amps. The control includes
compensation for line voltage variations up to 10% while
welding. Also included with the package are a 5m welding
cable with electrode holder and a 3m ground cable with
ground clamp and two male connectors.

The I-140 arc welding machine provides two modes of operation, controlled by a toggle switch, one for stick electrode
welding (SMAW) and the other for LIFT-TIG welding (GTAW) without high frequency.

Applications
The I-140 arc welding machine is best suited for routine shipboard maintenance and repairs utilizing the stick welding
process (SMAW) with electrodes up to 3.25mm diameter and also TIG welding (GTAW) of mild and stainless steels
using argon shielding gas without high frequency stabilization.

The exceptionally smooth and well regulated output results in high quality welds with excellent appearance using
stainless steel electrodes, such as the AMERARC SSMO, STV or ST on stainless steel.

Features
• Reliable inverter technology provides a lightweight, portable welding system.
• Stepless welding current adjustment from 4-140 amps output.
• Automatic overload protection shuts the machine down if the duty cycle rating is exceeded.
• Line voltage compensation automatically maintains the output current level in spite of input voltage variations of + 10%.
• Choice of stick or LIFT-TIG welding made by toggle switch.
• Meets IEC 974-1 regulation and IP23 protection, CE approved.

Technical Specifications
Input: 210-240 volts, single-phase, 50/60 Hz up to 20 amps
Power at Rated Outputs
Output Duty Cycle Input Power
140 amps @ 25.6V 35% 4.2KW
100 amps @ 24.2V 100% 3.3KW
Output Range: 5-140 amps
Open Circuit Voltage: 48 volts DC

Size and Weight


Dimensions: 145mm (6") Wide x 254mm (10") High x 350mm (14") Long
Weight: 6 kg (13.2 lb.)
How to Order
The I-140 inverter arc welding machine with primary cable, welding and ground cables, with installed electrode holder
and ground clamp with two male connectors. PCN 595068
Ashland Specialty Chemical
Drew Marine
One Drew Plaza
Boonton, NJ 07005 USA
Drew Marine Telephone: (973) 263-7600
FAX: (973) 263-7463/4491
®
Registered trademark, TMTrademark, Ashland. Web Site: www.drew-marine.com
E-Mail: drewmarine@ashland.com
627 5/3/06 9:31 PM Page 1

610-06

STROMME
HIGH-PRESSURE CLEANERS – Electric Powered – 160 to 1200 bar (2275 to 17,064 psi)
Epoxy treated steel frame • Stainless steel cover • Automatic start and stop • Plunger pump with ceramic pistons
Large wheels with brake (portable models) • Motor 3 phase, class F, protected by thermal overload switch

PORTABLE MODELS Model MC160/15 MC175/21 MC200/18 MC200/30 MC300/20 MC350/25


MC Series Working Pressure bar 160 175 200 200 300 350
(Cold Water) psi 2275 2488 2844 2844 4266 4977
Water Flow ltr/min. 15 21 18 30 20 25
gal./min. 4.0 5.5 4.8 7.9 5.3 6.6
Motor effect kW 4,4 6,0 6,0 11,7 11,7 16,0
Voltage v/Hz 440/60 440/60 440/60 440/60 440/60 440/60
Length mm 850 650 850 975 975 1075
inches 33.5 25.6 33.5 38.4 38.4 42.3
Width mm 580 390 520 650 650 750
inches 22.8 15.4 20.5 25.6 25.6 29.5
Height mm 820 330 850 865 865 965
inches 32.3 13.0 33.5 34.1 34.1 38.0
Weight kg 60 65 70 98 98 130
lbs. 132 143 154 216 216 286

Model MH160/15 MH200/18 MH250/20 MH300/20 Equipped with


MH Series
Working Pressure bar 160 200 250 300 high efficiency,
(Hot Water)
psi 2275 2844 3555 4266 fully automatic,
Water Flow ltr/min. 15 18 20 20 low consumption oil
gal./min. 4.0 4.8 5.3 5.3 burners and designed
Temperature 70-130°C / 158-266°F for temperatures
Motor effect kW 4,4 6,0 14,0 11,7 up to 130°C.
Voltage v/Hz 440/60 440/60 Diesel 440/60
Length mm 980 1100 1200 1200
Suitable for removing
inches 38.6 43.3 47.2 47.2 soot and oil in engine
Width mm 680 680 680 680 room, cleaning of
inches 26.7 26.7 26.7 26.7 cargo areas on car
Height mm 800 900 900 900 and RO-RO ships, or
inches 31.5 35.4 35.4 35.4 fresh water flushing
Weight kg 120 145 210 165 prior to painting.
lbs. 264 319 462 363

MS MS MS MS MS MS MS MS MS MS MS MS
STATIONARY MODELS Model 160/15 175/21 200/18 300/20 300/30 320/45 350/25 400/37 500/30 750/23 1000/15 1200/12
MS Series Work. Press. bar 160 175 200 300 300 30-320 350 400 30-500 30-750 30-1000 30-1200
psi 2275 2488 2844 4266 4266 427-4550 4977 5688 427-7110 427-10665 427-14223 427-17064
(Cold Water)
Water Flow ltr/min. 15 21 18 20 30 45 25 37 30 23 15 12
gal./min. 4.0 5.5 4.8 5.3 7.9 11.9 6.6 9.8 7.9 6.1 4.0 3.2
Motor effect kW 4,4 6,0 6,0 11,7 18 34,5 16 34,5 34,5 34,5 34,5 34,5
Voltage v/Hz 440/60 440/60 440/60 440/60 440/60 440/60 440/60 440/60 440/60 440/60 440/60 440/60
Length mm 650 650 650 975 910 1200 1075 1200 1200 1200 1200 1200
inches 25.6 25.6 25.6 38.4 35.8 47.3 42.3 47.3 47.3 47.3 47.3 47.3
Width mm 390 390 390 650 650 800 700 800 800 800 800 800
inches 15.4 15.4 15.4 25.6 25.6 31.5 27.6 31.5 31.5 31.5 31.5 31.5
Height mm 330 330 330 550 550 800 600 800 800 1150 1150 1150
inches 13.0 13.0 13.0 21.7 21.7 31.5 23.6 31.5 31.5 45.3 45.3 45.3
Weight kg 55 65 65 98 260 500 130 500 500 600 600 600
lbs. 121 143 143 216 572 1100 286 1100 1100 1320 1320 1320

Mari-Clean Available from stock points worldwide: Stromme Sales


USA
Germany Greece Norway The Netherlands Singapore
+1 860 653 9461
Tel: +49 40 72 24 029 +30 210 4293843 +47 67 52 60 60 +31 10 486 89 11 +65 6261 1600 +1 860 653 9457
Fax: +49 40 72 29 233 +30 210 4293845 +47 67 52 60 50 +31 10 428 27 98 +65 6261 1500 InfoStrommeUsa@cs.com
www.stromme.com
619 5/3/06 9:31 PM Page 1

611-06

ACORN PLATENS
WELDING PLATENS
Model Size Platens are gray iron castings featuring 1-3/4” square
3030 3’0” x 3’0” holes set on 3-1/2” centers used for bending, clamping
2650 2’6” x 5’0” etc. The top surface and side edges are machined to
4040 4’0” x 4’0” .005” per linear foot.
5050 5’0” x 5’0”
5060 5’0” x 6’0” Stands are constructed with sturdy structural steel and
5080 5’0” x 8’0” elevate platen to a 30” working height. Multiple units
ADD-A-SECTION can be joined to form an expanded working surface.
CONSTRUCTION

TOOLS AND ACCESSORIES


GOOSENECK ARM CLAMP HOLD-DOWN BOLT
HOLD-DOWN DOG Arm clamp, complete with offset Features: Offset forged head,
Material: forged steel head hold down bolt. washer and nut.
Features: 15” throat Material: ductile iron Sizes: 10” long Wgt: 2 lbs.
Weight: 17 lbs. Features: 2” throat 4-3/4” long 1-3/4 lb.
0” to 3-1/4” clamping 3-3/4” long 1-1/2 lb.
capacity
Weight: 9 lbs.
BENDING POST
Material: ductile iron
Features: 4” height above platen surface
45° ARM CLAMP
6” overall height

Potrebbero piacerti anche