Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Compiled by Thunder-link.com
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their
respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between
Huawei and the customer. All or part of the products, services and features described in this
document may not be within the purchase scope or the usage scope. Unless otherwise
specified in the contract, all statements, information, and recommendations in this document
are provided "AS IS" without warranties, guarantees or representations of any kind, either
express or implied.
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute a
warranty of any kind, express or implied.
Email: support@huawei.com
H801MPWC Board
Contents
8.11.1 H801MPWC Board
Parameters
The H801MPWC board leads in one -48 V power input through one
3V3 power connector, and transfers the power to the filter circuit,
then to the current limit protection circuit, and finally to the
backplane, supplying power to the subrack and other boards.
The detection and reporting circuit checks the protection fuse
for any faults, and reports the detection signals together with the
board ready status signal to the control board. The control board
indicates these detection signals through indicators.
The detection and reporting circuit checks for input
undervoltage and availability of power supply.
The E2PROM circuit stores the board manufacture information.
The H801MPWC board leads in the 5 V/3.3 V power from the
backplane to power certain internal chips of the board.